1 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
3 * po/tr.po: Updated translation.
5 2002-02-15 Richard Henderson <rth@redhat.com>
7 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
10 2002-02-15 Richard Henderson <rth@redhat.com>
12 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
15 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
17 * po/da.po: Updated translation.
19 2002-02-12 Graydon Hoare <graydon@redhat.com>
21 * cgen-asm.in (parse_insn_normal): Change call from
22 @arch@_cgen_parse_operand to cd->parse_operand, to
23 facilitate CGEN_ASM_INIT_HOOK doing useful work.
25 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
27 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
30 2002-02-11 Alan Modra <amodra@bigpond.net.au>
32 * Makefile.am: "make dep-am".
33 * Makefile.in: Regenerate.
34 * aclocal.m4: Regenerate.
35 * config.in: Regenerate.
36 * configure: Regenerate.
38 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
40 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
41 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
43 * configure: Regenerate.
45 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
47 * cgen-dis.c: Add prototypes for count_decodable_bits
48 and add_insn_to_hash_chain.
50 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
52 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
55 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
57 * or32-opc.c: Fix compile time warning messages.
58 * or32-dis.c: Fix compile time warning messages.
60 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
63 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
64 * sh64-opc.c: Regenerate.
65 2001-03-13 DJ Delorie <dj@redhat.com>
66 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
67 purpose is more obvious.
68 * sh64-opc.c (shmedia_table): Ditto.
69 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
70 (print_insn_shmedia): Ditto.
71 2001-03-12 DJ Delorie <dj@redhat.com>
72 * sh64-opc.c: Adjust comments to reflect reality: replace bits
73 3:0 with zeros (not "reserved"), replace "rrrrrr" with
74 "gggggg" for two-operand floating point opcodes. Remove
76 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
77 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
78 Correct printing of .byte:s. Return number of printed bytes or
80 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
81 to next four-byte-alignment if insn or data is not aligned.
82 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
83 * sh64-dis.c: Update comments and fix comment formatting.
84 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
85 Abort instead of setting length to 0.
86 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
87 crange_bsearch_cmpl, sh64_get_contents_type,
88 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
89 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
90 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
91 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
92 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
93 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
94 address with same prefix as SHcompact.
95 In the disassembler, use a .cranges section for linked executables.
96 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
97 and update for using structure in info->private_data.
98 (struct sh64_disassemble_info): New.
99 (is_shmedia_p): Delete.
100 (crange_qsort_cmpb): New function.
101 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
102 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
103 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
104 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
105 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
106 pair. Display addresses for linked executables only.
107 (print_insn_sh64x_media): Initialize info->private_data by calling
108 init_sh64_disasm_info.
109 (print_insn_sh64x): Ditto. Find out type of contents by calling
110 sh64_contents_type_disasm. Display data regions using ".long" and
111 ".byte" similar to unrecognized opcodes.
112 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
113 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
114 information in section flags before considering symbols. Don't
115 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
116 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
117 matching $target $canon_targets instead of looking at the
118 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
119 * configure: Regenerate.
120 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
121 * sh64-opc.c (shmedia_creg_table): New.
122 * sh64-opc.h (shmedia_creg_info): New type.
123 (shmedia_creg_table): Declare.
124 * sh64-dis.c (creg_name): New function.
125 (print_insn_shmedia): Use it.
126 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
127 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
128 print_insn_sh64l if little-endian.
129 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
130 (print_insn_sh64l): New.
131 (print_insn_sh64x): New.
132 (print_insn_sh64x_media): New.
133 (print_insn_sh64): Break out code to print_insn_sh64x and
134 print_insn_sh64x_media.
135 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
136 * sh64-opc.h: New file
137 * sh64-opc.c: New file
138 * sh64-dis.c: New file
139 * Makefile.am: Add sh64 targets.
140 (HFILES): Add sh64-opc.h.
141 (CFILES): Add sh64-opc.c and sh64-dis.c.
142 (ALL_MACHINES): Add sh64 files.
143 * Makefile.in: Regenerate.
144 * configure.in: Add support for sh64 to bfd_sh_arch.
145 * configure: Regenerate.
146 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
147 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
149 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
150 * po/POTFILES.in: Regenerate.
151 * po/opcodes.pot: Regenerate.
153 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
155 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
157 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
159 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
161 2002-02-01 Alan Modra <amodra@bigpond.net.au>
163 * Makefile.am: Run "make dep-am"
164 * Makefile.in: Regenerate.
166 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
168 * or32-dis.c: New file.
169 * or32-opc.c: New file.
170 * configure.in: Add support for or32.
171 * configure: Regenerate.
172 * Makefile.am: Add support for or32.
173 * Makefile.in: Regenerate.
174 * disassemble.c: Add support for or32.
175 * po/POTFILES.in: Regenerate.
176 * po/opcodes.pot: Regenerate.
178 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
180 * configure: Regenerated.
182 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
184 * po/fr.po: Updated version.
186 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
188 * po/es.po: Updated version.
190 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
192 * po/da.po: New version.
194 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
196 * po/da.po: New file: Spanish translation.
197 * configure.in (ALL_LINGUAS): Add da.
198 * configure: Regenerate.
200 2002-01-22 Graydon Hoare <graydon@redhat.com>
202 * fr30-asm.c: Regenerate.
203 * fr30-desc.c: Likewise.
204 * fr30-desc.h: Likewise.
205 * fr30-dis.c: Likewise.
206 * fr30-ibld.c: Likewise.
207 * fr30-opc.c: Likewise.
208 * fr30-opc.h: Likewise.
209 * m32r-asm.c: Likewise.
210 * m32r-desc.c: Likewise.
211 * m32r-desc.h: Likewise.
212 * m32r-dis.c: Likewise.
213 * m32r-ibld.c: Likewise.
214 * m32r-opc.c: Likewise.
215 * m32r-opc.h: Likewise.
216 * m32r-opinst.c: Likewise.
217 * openrisc-asm.c: Likewise.
218 * openrisc-desc.c: Likewise.
219 * openrisc-desc.h: Likewise.
220 * openrisc-dis.c: Likewise.
221 * openrisc-ibld.c: Likewise.
222 * openrisc-opc.c: Likewise.
223 * openrisc-opc.h: Likewise.
224 * xstormy16-desc.c: Likewise.
226 2002-01-22 Richard Henderson <rth@redhat.com>
228 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
231 2002-01-22 Alan Modra <amodra@bigpond.net.au>
233 * Makefile.am: Run "make dep-am".
234 * Makefile.in: Regenerate.
235 * opcodes/po/POTFILES.in: Regenerate.
237 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
239 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
240 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
242 2002-01-18 Keith Walker <keith.walker@arm.com>
244 * arm-opc.h (arm_opcodes): Add bxj instruction.
246 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
248 * po/opcodes.pot: Regenerate.
249 * po/fr.po: Regenerate.
250 * po/sv.po: Regenerate.
251 * po/tr.po: Regenerate.
253 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
255 * po/tr.po: Import new version.
257 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
259 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
260 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
263 2002-01-10 matthew green <mrg@redhat.com>
265 * xstormy16-asm.c: Regenerate.
266 * xstormy16-desc.c: Likewise.
267 * xstormy16-desc.h: Likewise.
268 * xstormy16-dis.c: Likewise.
269 * xstormy16-opc.c: Likewise.
270 * xstormy16-opc.h: Likewise.
272 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
274 * po/es.po: New file: Spanish translation.
275 * configure.in (ALL_LINGUAS): Add es.
276 * configure: Regenerate.
278 2001-12-31 Jeffrey A Law (law@redhat.com)
280 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
281 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
282 Always emit a space after 'H'.
284 2001-12-18 matthew green <mrg@redhat.com>
286 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
288 2001-12-17 Richard Henderson <rth@redhat.com>
290 * alpha-opc.c (unop): Encode with RB as $sp.
292 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
294 * Makefile.am: Add support for xstormy16.
295 * Makefile.in: Regenerate.
296 * configure.in: Add support for xstormy16.
297 * configure: Regenerate.
298 * disassemble.c: Add support for xstormy16.
299 * xstormy16-asm.c: New generated file.
300 * xstormy16-desc.c: New generated file.
301 * xstormy16-desc.h: New generated file.
302 * xstormy16-dis.c: New generated file.
303 * xstormy16-ibld.c: New generated file.
304 * xstormy16-opc.c: New generated file.
305 * xstormy16-opc.h: New generated file.
307 2001-12-06 Richard Henderson <rth@redhat.com>
309 * alpha-opc.c (alpha_opcodes): Add wh64en.
311 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
313 * d10v-opc.c (d10v_predefined_registers): Remove warnings
314 introduced in Nov 29's patch.
316 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
319 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
322 * d10v-opc.c (RSRC_NOSP): New macro.
323 (d10v_operands): Add it.
324 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
326 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
328 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
329 (RSRC_SP): New macro.
330 (d10v_operands): Add it.
331 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
333 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
335 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
336 Also, break out of the loop as soon as an instruction has been
339 2001-11-17 matthew green <mrg@redhat.com>
341 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
343 2001-11-15 Alan Modra <amodra@bigpond.net.au>
345 * po/POTFILES.in: Regenerate.
347 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
348 (insert_bat, extract_bat, insert_bba, extract_bba,
349 insert_bd, extract_bd, insert_bdm, extract_bdm,
350 insert_bdp, extract_bdp, valid_bo,
351 insert_bo, extract_bo, insert_boe, extract_boe,
352 insert_ds, extract_ds, insert_de, extract_de,
353 insert_des, extract_des, insert_li, extract_li,
354 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
355 insert_nb, extract_nb, insert_nsi, extract_nsi,
356 insert_ral, insert_ram, insert_ras,
357 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
358 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
359 (extract_bd, extract_bdm, extract_bdp,
360 extract_ds, extract_des,
361 extract_li, extract_nsi): Implement sign extension without conditional.
362 (insert_bdm, extract_bdm,
363 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
364 (extract_bdm, extract_bdp): Correct 32 bit validation.
365 (AT1_MASK, AT2_MASK): Define.
366 (BBOAT_MASK): Define.
367 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
368 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
369 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
370 (PPCCOM32, PPCCOM64): Define.
371 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
372 and add new patterns to implement 64 bit branches with hints. Move
373 booke instructions so they match before ppc64.
375 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
376 64 bit default targets, and parse "32" and "64" in options.
378 (print_insn_powerpc): Pass dialect to operand->extract.
380 2001-11-14 Dave Brolley <brolley@redhat.com>
382 * cgen-dis.c (count_decodable_bits): New function.
383 (add_insn_to_hash_chain): New function.
384 (hash_insn_array): Call add_insn_to_hash_chain.
385 (hash_insn_list): Call add_insn_to_hash_chain.
386 * m32r-dis.c: Regenerated.
387 * fr30-dis.c: Regenerated.
389 2001-11-14 Andreas Jaeger <aj@suse.de>
391 * i386-dis.c (print_insn): Use x86-64 as option.
393 2001-11-14 Alan Modra <amodra@bigpond.net.au>
395 * disassemble.c (disassembler): Call print_insn_i386.
396 * i386-dis.c (SUFFIX_ALWAYS): Define.
397 (struct dis_private): Add orig_sizeflag.
398 (print_insn_i386): Make it a wrapper, calling..
399 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
400 warning without using volatile by moving orig_sizeflag to priv,
401 and removing inbuf. Parse disassembler_options.
402 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
404 (putop): Remove #ifdef SUFFIX_ALWAYS.
406 2001-11-11 Timothy Wall <twall@alum.mit.edu>
408 * tic54x-dis.c: Use revised opcode structure. Export opcode
410 (has_lkaddr): Don't forget about Lmem insns.
411 * tic54x-opc.c: Add emulation trap. Parallel table now uses
412 standard opcode templates.
414 2001-11-13 Zack Weinberg <zack@codesourcery.com>
416 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
417 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
418 category instead of Ew.
420 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
422 * m68k-opc.c: Fix definitions of wddata[bwl].
424 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
426 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
427 fit in the buffer, try to match the empty keyword.
429 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
431 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
432 * fr30-ibld.c: Regenerate.
433 * m32r-ibld.c: Regenerate.
434 * openrisc-ibld.c: Regenerate.
436 2001-11-04 Chris Demetriou <cgd@broadcom.com>
438 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
440 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
442 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
443 * configure: Regernate.
444 * po/fr.po: New file.
445 * po/sv.po: New file.
446 * po/tr.po: New file.
448 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
450 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
453 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
455 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
457 * Makefile.in: Regenerate.
458 * mmix-dis.c, mmix-opc.c: New files.
460 2001-10-29 Kazu Hirata <kazu@hxi.com>
462 * d30v-dis.c: Fix a comment typo.
464 2001-10-23 Chris Demetriou <cgd@broadcom.com>
466 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
467 "bltzall" as writing GPR 31 (since they do).
469 * mips-dis.c (print_insn_arg): Calculate info->target
471 (print_insn_mips): Fill in instruction info.
472 (print_mips16_insn_arg): Remove unneded variable 'val'.
473 Removed duplicated instruction target calculations,
474 calculate once and print that result. Use same idiom for
475 masking the jump segment bits as is used in print_insn_arg.
477 2001-10-20 Alan Modra <amodra@bigpond.net.au>
479 * ppc-opc.c (CT): Make it an optional operand.
481 2001-10-17 Chris Demetriou <cgd@broadcom.com>
483 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
484 SB-1 binaries include instructions specific to the SB-1.
485 * mips-opc.c (SB1): New definition.
486 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
487 "recip.ps", "rsqrt.ps", and "sqrt.ps".
489 2001-10-17 matthew green <mrg@redhat.com>
491 * ppc-opc.c (STRM): New AltiVec operand.
492 (XDSS): New AltiVec instruction form.
493 (mtvscr): Correct operand list.
494 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
496 2001-10-17 Alan Modra <amodra@bigpond.net.au>
498 * po/POTFILES.in: Regenerate.
500 2001-10-13 matthew green <mrg@redhat.com>
502 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
503 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
504 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
506 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
508 * cgen-ibld.in: Include safe-ctype.h in preference to
510 * cgen-asm.in: Include safe-ctype.h in preference to
511 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
512 TOLOWER instead of tolower.
513 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
514 string elements in constructed regular expression.
515 * fr30-asm.c: Regenerate.
516 * fr30-desc.c: Regenerate.
517 * fr30-ibld.c: Regenerate.
518 * m32r-asm.c: Regenerate.
519 * m32r-desc.c: Regenerate.
520 * m32r-ibld.c: Regenerate.
521 * openrisc-asm.c: Regenerate.
522 * openrisc-desc.c: Regenerate.
523 * openrisc-ibld.c: Regenerate.
524 * po/opcodes.pot: Regenerate.
526 2001-10-12 matthew green <mrg@redhat.com>
528 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
529 instruction field instruction/extraction functions for new BookE
530 DE form instructions.
531 (CT): New macro for CT field in an X form instruction.
532 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
534 (PPC64): Don't include PPC_OPCODE_PPC.
535 (403): New opcode macro for PPC403 processors.
536 (BOOKE): New opcode macro for BookE processors.
537 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
538 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
539 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
540 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
541 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
542 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
543 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
544 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
545 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
546 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
547 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
548 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
549 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
550 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
552 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
553 for a disassembler option of `booke', `booke32' or `booke64' to enable
554 BookE support in the disassembler.
556 2001-10-12 John Healy <jhealy@redhat.com>
558 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
559 for the length when extracting the base part of the insn.
561 2001-10-09 Bruno Haible <haible@clisp.cons.org>
563 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
564 regular expression. Fix some formatting problems.
565 * fr30-asm.c: Regenerate.
566 * openrisc-asm.c: Regenerate.
567 * m32r-asm.c: Regenerate.
569 2001-10-09 Christian Groessler <cpg@aladdin.de>
571 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
572 of indirect register memory accesses to be same format the
575 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
577 * sh-opc.h: Fix encoding of least significant nibble of the
578 DSP single data transfer instructions.
580 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
583 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
585 * cgen-asm.in: Fix compile time warning messages in generated
587 * cgen-dis.in: The same.
588 * cgen-ibld.in: The same.
589 * fr30-asm.c: Regenerate.
590 * fr30-desc.c: Regenerate.
591 * fr30-dis.c: Regenerate.
592 * fr30-ibld.c: Regenerate.
593 * fr30-opc.c: Regenerate.
594 * m32r-asm.c: Regenerate.
595 * m32r-desc.c: Regenerate.
596 * m32r-dis.c: Regenerate.
597 * m32r-ibld.c: Regenerate.
598 * m32r-opc.c: Regenerate.
599 * m32r-opinst.c Regenerate.
600 * openrisc-asm.c: Regenerate.
601 * openrisc-desc.c: Regenerate.
602 * openrisc-dis.c: Regenerate.
603 * openrisc-ibld.c: Regenerate.
604 * openrisc-opc.c: Regenerate.
605 * openrisc-opc.h: Regenerate.
606 * Makefile.in: Regenerate.
607 * po/POTFILES.in: Regenerate.
608 * po/opcodes.pot: Regenerate.
610 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
612 * arm-opc.h (arm_opcodes): Add cirrus insns.
614 * arm-dis.c (print_insn_arm): Add 'I' case.
616 2001-10-03 Alan Modra <amodra@bigpond.net.au>
618 * po/POTFILES.in: Regenerate.
619 * configure: Regenerate.
621 2001-10-02 Alan Modra <amodra@bigpond.net.au>
623 * Makefile.am (Makefile): Depend on bfd/configure.in.
625 * Makefile.in: Regenerate.
627 2001-09-30 John Healy <jhealy@redhat.com>
629 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
630 calls to cgen_get_insn_value and cgen_put_insn_value calls.
631 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
633 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
635 * Makefile.am: Update dependencies with "make dep-am".
636 * Makefile.in: Regenerate.
638 2001-09-26 Alan Modra <amodra@bigpond.net.au>
640 * arc-dis.c: Formatting fixes.
641 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
643 2001-09-21 Bruno Haible <haible@clisp.cons.org>
645 * arc-dis.c: Don't include <ctype.h>.
646 * openrisc-desc.c: Likewise.
647 * openrisc-ibld.c: Likewise.
649 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
651 * fr30-opc.c: Fix compile time warning messages.
652 * i370-opc.c: Fix compile time warning messages.
653 * i960-dis.c: Fix compile time warning messages.
654 * m32r-asm.c: Fix compile time warning messages.
655 * m32r-desc.c: Fix compile time warning messages.
656 * m32r-dis.c: Fix compile time warning messages.
657 * m32r-ibld.c: Fix compile time warning messages.
658 * m32r-opc.c: Fix compile time warning messages.
659 * m32r-opinst.c: Fix compile time warning messages.
660 * ns32k-dis.c: Fix compile time warning messages.
661 * openrisc-asm.c: Fix compile time warning messages.
662 * openrisc-desc.c: Fix compile time warning messages.
663 * openrisc-dis.c: Fix compile time warning messages.
664 * openrisc-ibld.c: Fix compile time warning messages.
665 * openrisc-opc.c: Fix compile time warning messages.
666 * pdp11-dis.c: Fix compile time warning messages.
667 * tic54x-dis.c: Fix compile time warning messages.
668 * v850-opc.c: Fix compile time warning messages.
669 * vax-dis.c: Fix compile time warning messages.
670 * w65-opc.h: Fix compile time warning messages.
671 * z8k-opc.h: Fix compile time warning messages.
672 * z8kgen.c: Fix compile time warning messages.
674 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
676 * arm-dis.c: Fix compile time warning messages.
677 * cgen-asm.c: Fix compile time warning messages.
678 * cgen-dis.c: Fix compile time warning messages.
679 * cris-dis.c: Fix compile time warning messages.
680 * d10v-dis.c: Fix compile time warning messages.
681 * fr30-asm.c: Fix compile time warning messages.
682 * fr30-desc.c: Fix compile time warning messages.
683 * fr30-dis.c: Fix compile time warning messages.
684 * fr30-ibld.c: Fix compile time warning messages.
686 2001-09-18 Bruno Haible <haible@clisp.cons.org>
688 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
689 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
690 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
691 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
693 (cgen_keyword_add): Use ISALNUM instead of isalnum.
694 (hash_keyword_name): Use TOLOWER instead of tolower.
695 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
696 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
698 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
699 * fr30-desc.c: Don't include <ctype.h>.
700 * fr30-ibld.c: Likewise.
701 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
702 (load_insn_classes, parse_resource_users, load_depfile): Use
703 ISSPACE instead of isspace.
704 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
705 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
707 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
708 * m32r-desc.c: Don't include <ctype.h>.
709 * m32r-ibld.c: Likewise.
710 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
711 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
713 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
715 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
717 * Makefile.am: Add rules and dependencies to create the s/390 opcode
718 table out of s390-opc.txt automatically.
719 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
720 * s390-mkopc.c (dumpTable): Change output to create a complete file.
721 * s390-opc.c: New improved opcode format macros and remove the
722 pregenerated opcode table.
723 * s390-opc.txt: Adapt to new improved opcode format macros.
725 2001-09-14 David Schleef <ds@schleef.org>
727 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
729 2001-09-04 Alan Modra <amodra@bigpond.net.au>
731 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
732 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
734 2001-08-31 Eric Christopher <echristo@redhat.com>
735 Jason Eckhardt <jle@redhat.com>
737 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
738 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
741 2001-08-31 Andreas Jaeger <aj@suse.de>
743 * tic54x-opc.c: Add default initializers to avoid warnings.
745 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
746 * arc-ext.c: Likewise.
748 2001-08-28 matthew gren <mrg@redhat.com>
750 * ppc-opc.c (icbt): Order correctly.
752 2001-08-27 David Edelsohn <dje@watson.ibm.com>
753 Torbjorn Granlund <tege@swox.com>
755 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
757 (insert_ds): Complain if not a multiple of 4.
759 (XSYNC_MASK): Define.
760 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
761 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
763 2001-08-26 Andreas Jaeger <aj@suse.de>
765 * h8500-opc.h: Add default initializers to h8500_table to shut up
768 2001-08-25 Andreas Jaeger <aj@suse.de>
770 * tic54x-dis.c: Add unused attributes where needed.
772 * z8k-dis.c (output_instr): Add unused attribute.
774 * h8300-dis.c: Add missing prototypes.
775 (bfd_h8_disassemble): Make static.
777 * cris-dis.c: Add missing prototype.
778 * h8500-dis.c: Likewise.
779 * m68hc11-dis.c: Likewise.
780 * pj-dis.c: Likewise.
781 * tic54x-dis.c: Likewise.
782 * v850-dis.c: Likewise.
783 * vax-dis.c: Likewise.
784 * w65-dis.c: Likewise.
785 * z8k-dis.c: Likewise.
787 * d10v-dis.c: Add missing prototype.
788 (dis_long): Remove unused variable.
789 (dis_2_short): Likewise.
791 * sh-dis.c: Add missing prototypes.
792 * v850-opc.c: Likewise.
793 Add unused attributes where needed.
795 * ns32k-dis.c: Add missing prototypes.
796 (bit_extract_simple): Remove unused variable.
798 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
800 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
801 branch instructions for gcc 3.0.
802 * opcodes/s390-opc.txt: Likewise.
804 2001-08-21 Andreas Jaeger <aj@suse.de>
806 * i960-dis.c: Add parameters for prototypes
807 (ctrl): Add unused attributes.
811 * mips-dis.c: Add missing prototypes.
812 * a29k-dis.c: Likewise.
813 * arc-dis.c: Likewise.
814 * ia64-opc.c: Likewise.
816 * s390-dis.c: Add missing prototypes.
817 (init_disasm): Remove unused attribute since the parameter is
820 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
822 * mips-opc.c (M1): Define. Reformatted Code.
823 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
826 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
828 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
829 the corresponding non-likely insn is in MIPS I.
831 2001-08-13 Kazu Hirata <kazu@hxi.com>
833 * mcore-dis.c: Fix formatting.
834 * mips-dis.c: Likewise.
835 * pj-dis.c: Likewise.
836 * z8k-dis.c: Likewise.
838 2001-08-12 Richard Henderson <rth@redhat.com>
840 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
841 to *VALUEP. Regenerate all cgen files.
843 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
845 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
847 * mips-opc.c (G6): Undefine.
848 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
849 as the first "move" alternative.
851 2001-08-10 Andreas Jaeger <aj@suse.de>
853 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
855 * configure: Regenerate.
857 2001-08-10 Alan Modra <amodra@bigpond.net.au>
859 * ppc-opc.c: Revert 2001-08-08.
861 2001-08-09 Alan Modra <amodra@bigpond.net.au>
863 * dis-buf.c (generic_strcat_address): Add missing prototype.
864 #if 0 the functions as it is unused.
866 2001-08-08 Alan Modra <amodra@bigpond.net.au>
868 1999-10-25 Torbjorn Granlund <tege@swox.com>
869 * ppc-opc.c: Include "bfd.h".
870 (powerpc_operands): Add new field for reloc type.
872 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
874 * mips-dis.c (print_insn_arg): Don't use software integer registers
875 for coprocessor registers.
876 (get_mips_isa): Removed.
877 (is_newabi): New function, checks if NewABI is used.
878 (_print_insn_mips): Get distinction between old ABI and new ABI right.
880 2001-08-01 Christian Groessler <cpg@aladdin.de>
882 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
883 get stderr definition.
884 (internal, gas): Removed warnings.
885 (gas): Create a correct final entry for created array.
886 * z8k-opc.h: Recreated with new z8kgen.
888 2001-07-28 Kazu Hirata <kazu@hxi.com>
890 * i386-dis.c: Fix formatting.
892 2001-07-28 Matthias Kramm <kramm@quiss.org>
894 * i386-dis.c: Change formatting conventions for architecture
895 i386:intel to better match the format of various intel i386
896 assemblers, like nasm, tasm or masm.
898 2001-07-24 Alan Modra <amodra@bigpond.net.au>
900 * Makefile.am: Update dependencies with "make dep-am".
901 * Makefile.in: Regenerate
903 2001-07-24 Kazu Hirata <kazu@hxi.com>
905 * alpha-dis.c: Fix formatting.
906 * cris-dis.c: Likewise.
907 * d10v-dis.c: Likewise.
908 * d30v-dis.c: Likewise.
909 * m10300-dis.c: Likewise.
910 * tic54x-dis.c: Likewise.
912 2001-07-23 Kazu Hirata <kazu@hxi.com>
914 * m68k-dis.c: Fix formatting.
915 * pj-dis.c: Likewise.
916 * s390-dis.c: Likewise.
917 * z8k-dis.c: Likewise.
919 2001-07-21 Chris Demetriou <cgd@broadcom.com>
921 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
922 into the rest of the surrounding definitions.
924 2001-07-18 Alan Modra <amodra@bigpond.net.au>
926 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
927 for lgdt, lidt, sgdt, sidt.
929 2001-07-13 Philip Blundell <philb@gnu.org>
931 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
933 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
935 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
937 (@arch@_cgen_build_insn_regex): New routine from Graydon.
938 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
939 to verify if it is worth parsing the insn as insn "x". Also update
940 error message when insn is not a recognized format of the insn vs
941 when the insn is completely unrecognized.
943 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
945 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
947 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
948 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
950 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
952 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
953 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
954 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
956 2001-07-05 Ben Elliston <bje@redhat.com>
958 * Makefile.am (CPUDIR): Define.
959 (stamp-m32r): Update dependencies.
961 (stamp-openrisc): Ditto.
962 * Makefile.in: Regenerate.
964 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
966 * ppc-opc.c: Fix encoding of 'clf' instruction.
968 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
970 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
972 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
974 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
975 * cgen-opc.c (cgen_keyword_add): Ignore special first
976 character when building nonalpha_chars field.
978 2001-06-24 Ben Elliston <bje@redhat.com>
980 * m88k-dis.c: Format to conform to GNU coding standards.
982 2001-06-23 Andreas Jaeger <aj@suse.de>
984 * disassemble.c (disassembler_usage): Add unused attribute.
986 2001-06-22 Eric Christopher <echristo@redhat.com>
988 * mips-opc.c: Move prefx to start of the table.
990 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
992 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
995 2001-06-22 Pauli <pauli@moreton.com.au>
997 * m68k-opc.c: Add wdebug instruction.
999 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1001 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1003 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1005 * cgen-asm.c (cgen_parse_keyword): When looking for the
1006 boundaries of a keyword, allow any special characters
1007 that are actually in one of the allowed keyword.
1008 * cgen-opc.c (cgen_keyword_add): Add any special characters
1009 to the nonalpha_chars field.
1011 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1013 * s390-opc.c: Add lgh instruction.
1014 * s390-opc.txt: Likewise.
1016 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1018 * i386-dis.c: Group function prototypes in one place.
1019 (FLOATCODE): Redefine as 1.
1020 (USE_GROUPS): Redefine as 2.
1021 (USE_PREFIX_USER_TABLE): Redefine as 3.
1022 (X86_64_SPECIAL): Define as 4.
1023 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1024 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1025 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1026 (dis386): New table combining above four tables.
1027 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1028 (dis386_twobyte): New table combining above two tables.
1029 (x86_64_table): New table to handle x86_64.
1031 (float_mem_att, float_mem_intel): Delet.
1032 (float_mem): New table combining above two tables.
1033 (print_insn_i386): Modify for above.
1034 (dofloat): Likewise.
1035 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1036 Return 0 on success, 1 if no valid alternative.
1037 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1038 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1039 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1040 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1042 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1043 (OP_I64): If not 64-bit mode, call OP_I.
1044 OP_OFF64): If not 64-bit mode, call OP_OFF.
1045 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1046 'ignore'/'ignored' to 'bytemode'.
1048 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1050 * configure.in: Sort 'ta' case statement.
1051 * configure: Regenerate.
1053 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1055 (disx86_64_att): Likewise.
1056 (dis386_twobyte_att): Likewise.
1057 (print_insn_i386): Don't print branch hints as a prefix.
1058 (putop): 'H' macro prints branch hints.
1059 (get64): Kill compile warnings.
1061 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1063 * sh-opc.h (sh_table): Don't use empty initializers.
1065 2001-06-06 Christian Groessler <cpg@aladdin.de>
1067 * z8k-dis.c: Fix formatting.
1068 (unpack_instr): Remove unused cases in switch statement. Add
1069 safety abort() in default case.
1070 (unparse_instr): Add safety abort() in default case.
1072 2001-06-06 Peter Jakubek <pjak@snafu.de>
1074 * m68k-dis.c (print_insn_m68k): Fix typo.
1075 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1076 mcf (ColdFire) div, rem and moveb instructions.
1078 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1080 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1081 (cond_jump_mode, loop_jcxz_mode): Define.
1082 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1083 appropriate, and 'F' suffix to loop insns.
1084 (disx86_64_att): Likewise.
1085 (dis386_twobyte_att): Likewise.
1086 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1087 Output data size prefix for long conditional jumps. Output cs and
1089 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1090 (OP_J): Don't make PREFIX_DATA used.
1092 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1094 * sh-opc.h (sh_table): Complete last element entry to avoid
1097 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1099 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1101 2001-05-23 Alan Modra <amodra@one.net.au>
1103 * arc-opc.c: Whitespace changes.
1105 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1107 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1110 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1112 * cgen-dis.in (extract_normal): Complete support for min<base case.
1114 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1116 * mips-dis.c (INSNLEN): Rename MAXLEN.
1117 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1118 (print_insn_arg): Remove $ prefix of register names.
1119 (set_mips_isa_type): Remove.
1120 (mips_isa_type): New function.
1121 (get_mips_isa): New Function.
1122 (print_insn_mips): Rename _print_insn_mips.
1123 (_print_insn_mips): New function, contains code which was
1124 duplicated in print_insn_big_mips and print_insn_little_mips.
1125 (print_insn_big_mips): Moved code to _print_insn_mips.
1126 (print_insn_little_mips): Likewise.
1127 (print_mips16_insn_arg): Remove $ prefix of register names.
1128 Print error message before abort.
1130 2001-05-14 J.T. Conklin <jtc@redback.com>
1132 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1133 simplified mnemonics used for setting PPC750-specific special
1136 2001-05-12 H.J. Lu <hjl@gnu.org>
1138 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1141 2001-05-12 Peter Targett <peter.targett@arccores.com>
1143 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1144 register to r/w. Formatting fixes throughout file.
1146 2001-05-12 Alan Modra <amodra@one.net.au>
1148 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1150 (twobyte_has_modrm): Update table.
1151 (need_modrm): Give it file scope.
1152 (MODRM_CHECK): Define.
1153 (dofloat): Use MODRM_CHECK.
1158 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1160 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1161 even at end of a section.
1162 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1163 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1165 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1167 * disassemble.c (disassembler_usage): Remove unused attribute.
1169 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1171 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1173 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1175 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1176 assume incoming buffer already has the base insn loaded. Handle
1177 smaller-than-base instructions for variable-length case.
1179 2001-05-04 Alan Modra <amodra@one.net.au>
1181 * i386-dis.c (Ev, Ed): Remove duplicate define.
1184 (OP_XS): New function.
1185 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1187 (dis386_twobyte_intel): Likewise.
1188 (prefix_user_table): Use MS for maskmovq operand.
1190 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1192 * Makefile.am: Add OpenRISC target.
1193 * Makefile.in: Regenerated.
1195 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1197 * configure.in (bfd_openrisc_arch): Add target.
1198 * configure: Regenerated.
1200 * openrisc-asm.c: New file.
1201 * openrisc-desc.c: Likewise.
1202 * openrisc-desc.h: Likewise.
1203 * openrisc-dis.c: Likewise.
1204 * openrisc-ibld.c: Likewise.
1205 * openrisc-opc.c: Likewise.
1206 * openrisc-opc.h: Likewise.
1208 2001-04-24 Christian Groessler <cpg@aladdin.de>
1210 * z8k-dis.c: add names of control registers (ctrl_names);
1211 (seg_length): provides instruction length fixup for segmented
1212 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1213 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1214 (unparse_intr): handle CLASS_PR, print addresses without '#'
1215 * z8k-opc.h: re-created with new z8kgen
1216 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1217 entries for ldctl/ldctlb instruction
1219 2001-04-06 Andreas Jaeger <aj@suse.de>
1221 * i386-dis.c: Add ffreep instruction.
1223 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1225 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1227 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1229 * i386-dis.c (PREGRP25): Define.
1230 (dis386_twobyte_att): Use here in place of "movntq" entry.
1231 (dis386_twobyte_intel): Likewise.
1232 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1234 (dis386_twobyte_att): Use here.
1235 (dis386_twobyte_intel): Likewise.
1236 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1237 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1238 (prefix_user_table): Cosmetic changes to "bad" entries.
1240 2001-03-23 Nick Clifton <nickc@redhat.com>
1242 * mips-opc.c: Remove extraneous whitespace.
1243 * mips-dis.c: Remove extraneous whitespace.
1245 2001-03-22 Ben Elliston <bje@redhat.com>
1247 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1248 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1249 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1250 to allay a compiler warning.
1252 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1254 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1255 (dis386_twobyte_intel): Likewise.
1256 (twobyte_has_modrm): Set entry for paddq, psubq.
1258 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1260 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1261 determination via CGEN_COMPUTE_MACH.
1262 * fr30-desc.c: Regenerate.
1263 * fr30-dis.c: Regenerate.
1264 * fr30-opc.h: Regenerate.
1265 * m32r-desc.c: Regenerate.
1266 * m32r-dis.c: Regenerate.
1267 * m32r-opc.h: Regenerate.
1268 * m32r-opinst.c: Regenerate.
1270 2001-03-20 H.J. Lu <hjl@gnu.org>
1272 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1273 * configure: Rebuild.
1275 2001-03-19 Jim Wilson <wilson@redhat.com>
1277 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1278 notestr if larger than xsect.
1279 (in_class): Handle format M5.
1280 * ia64-asmtab.c: Regnerate.
1282 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1284 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1285 has more than one byte left to read.
1287 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1289 * s390-opc.c: Add new opcodes. Smooth out formatting.
1290 * s390-opc.txt: Add new opcodes.
1292 2001-03-06 Nick Clifton <nickc@redhat.com>
1294 * arm-dis.c (print_insn_thumb): Compute destination address
1295 of BLX(1) instruction by taking bit 1 from PC and not from bit
1298 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1300 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1301 so command line switches will work.
1303 2001-03-05 Dave Brolley <brolley@redhat.com>
1305 * fr30-asm.c: Regenerate.
1306 * fr30-desc.c: Regenerate.
1307 * fr30-desc.h: Regenerate.
1308 * fr30-dis.c: Regenerate.
1309 * fr30-ibld.c: Regenerate.
1310 * fr30-opc.c: Regenerate.
1311 * fr30-opc.h: Regenerate.
1312 * m32r-asm.c: Regenerate.
1313 * m32r-desc.c: Regenerate.
1314 * m32r-desc.h: Regenerate.
1315 * m32r-dis.c: Regenerate.
1316 * m32r-ibld.c: Regenerate.
1317 * m32r-opc.c: Regenerate.
1318 * m32r-opc.h: Regenerate.
1319 * m32r-opinst.c: Regenerate.
1321 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1323 * m68k-opc.c: fix cpushl according to Motorola. Enable
1324 bunch of instructions for Coldfire 5407 and add all new.
1326 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1328 * configure.in (BFD_VERSION): Do without grep.
1329 * configure: Regenerate.
1330 * Makefile.am: Run "make dep-am".
1331 * Makefile.in: Regenerate.
1333 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1335 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1336 * ia64-asmtab.c: Regenerate.
1338 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1340 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1341 separate variants: one for IMM22 and the other for IMM14.
1342 * ia64-asmtab.c: Regenerate.
1344 2001-02-21 Greg McGary <greg@mcgary.org>
1346 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1348 2001-02-20 H.J. Lu <hjl@gnu.org>
1350 * Makefile.am (ia64-ic.tbl): Remove the target.
1351 (ia64-raw.tbl): Likewise.
1352 (ia64-waw.tbl): Likewise.
1353 (ia64-war.tbl): Likewise.
1354 (ia64-asmtab.c): Generate it in the source directory.
1355 * Makefile.in: Regenerated.
1357 2001-02-18 lars brinkhoff <lars@nocrew.org>
1359 * Makefile.am: Add PDP-11 target.
1360 * configure.in: Likewise.
1361 * disassemble.c: Likewise.
1362 * pdp11-dis.c: New file.
1363 * pdp11-opc.c: New file.
1365 2001-02-14 Jim Wilson <wilson@redhat.com>
1367 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1368 * ia64-asmtab.c: Regenerate.
1370 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1372 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1376 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1378 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1379 the following instruction not of the jump itself for the jump
1381 (print_mips16_insn_arg): Likewise.
1383 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1385 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1387 * Makefile.in: Regenerate.
1389 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1391 * Makefile.am: Add linux target for S/390.
1392 * Makefile.in: Likewise.
1393 * configure.in: Likewise.
1394 * disassemble.c: Likewise.
1395 * s390-dis.c: New file.
1396 * s390-mkopc.c: New file.
1397 * s390-opc.c: New file.
1398 * s390-opc.txt: New file.
1400 2001-02-05 Jim Wilson <wilson@redhat.com>
1402 * ia64-asmtab.c: Revert 2000-12-16 change.
1404 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1406 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1407 * m32r-desc.h: Regenerate.
1409 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1411 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1412 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1414 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1416 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1418 2001-01-13 Nick Clifton <nickc@redhat.com>
1420 * disassemble.c: Remove spurious white space.
1422 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1424 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1427 2001-01-11 Peter Targett <peter.targett@arccores.com>
1429 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1430 * Makefile.am (C_FILES): Add arc-ext.c.
1431 (ALL_MACHINES) Add arc-ext.lo.
1432 (INCLUDES) Add opcode directory to list.
1433 New dependency entry for arc-ext.lo.
1434 * disassemble.c (disassembler): Correct call to
1435 arc_get_disassembler.
1436 * arc-opc.c: New update for ARC, including full base
1437 instructions for ARC variants.
1438 * arc-dis.h, arc-dis.c: New update for ARC, including
1439 extensibility functionality.
1440 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1442 2001-01-10 Jan Hubicka <jh@suse.cz>
1444 * i386-dis.c (PREGRP15 - PREGRP24): New.
1445 (dis386_twobyt): Add SSE2 instructions.
1446 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1447 (twobyte_uses_f3_prefix): ... this one.
1448 (grps): Add SSE instructions.
1449 (prefix_user_table): Add two new slots; add SSE2 instructions.
1450 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1451 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1452 to prefix_user_table.
1453 (OP_E): Accept mfence and lfence as well.
1454 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1455 (OP_XMM): Support REX extensions.
1459 2001-01-09 Nick Clifton <nickc@redhat.com>
1461 * arm-dis.c (print_insn): Set pc to zero for instructions with
1462 a reloc associated with them.
1464 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1466 * cgen-asm.in (parse_insn_normal): Changed syn to be
1467 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1468 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1469 to '\0' to use 0 instead.
1470 * cgen-dis.in (print_insn_normal): Ditto.
1471 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1473 2001-01-05 Jan Hubicka <jh@suse.cz>
1475 * i386-dis.c: Add x86_64 support.
1476 (rex): New static variable.
1477 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1478 (USED_REX): New macro.
1479 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1480 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1481 (OP_REG, OP_OFF): Declare.
1482 (get64, get32, get32s): New functions.
1483 (r??_reg): New constants.
1484 (dis386_att): Change templates of instruction implicitly promoted
1485 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1487 (dis386_intel): Likewise.
1488 (dixx86_64_att): New table based on dis386_att.
1489 (dixx86_64_intel): New table based on dis386_intel.
1490 (names64, names8rex): New global variable.
1491 (names32, names16): Add extended registers.
1492 (prefix_user_t): Recognize rex prefixes.
1493 (prefix_name): Print REX prefixes nicely.
1494 (op_riprel): New global variable.
1495 (start_pc): Set type to bfd_vma.
1496 (print_insn_i386): Detect the 64bit mode and use proper table;
1497 move ckprefix after initializing the buffer; output unused rex prefixes;
1498 output information about target of RIP relative addresses.
1499 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1500 (print_operand_value): New function.
1501 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1502 REX prefix and new modes.
1503 (get64, get32s): New.
1504 (get32): Return bfd_signed_vma type.
1505 (set_op): Initialize the op_riprel.
1506 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1508 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1510 cgen-dis.in (read_insn): Use bfd_get_bits()
1512 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1514 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1515 (hash_insn_list): Likewise
1516 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1517 (extract_1): Use bfd_get_bits().
1518 (extract_normal): Apply sign extension to both extraction
1520 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1521 (cgen_put_insn_value): Use bfd_put_bits()
1523 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1525 * cgen-asm.in (parse_insn_normal): Print better error message for
1526 instructions with missing operands.
1528 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1530 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1532 2000-12-16 Nick Clifton <nickc@redhat.com>
1534 * Makefile.in: Regenerate.
1535 * aclocal.m4: Regenerate.
1536 * config.in: Regenerate.
1537 * configure.in: Add spacing.
1538 * configure: Regenerate.
1539 * ia64-asmtab.c: Regenerate.
1540 * po/opcodes.pot: Regenerate.
1542 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1544 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1545 error messages over later parse-time ones.
1547 2000-12-12 Jim Wilson <wilson@redhat.com>
1549 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1551 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1552 (print_dependency_table): Print NULL if semantics field not set.
1553 (insert_opcode_dependencies): Mark cmp parameter as unused.
1554 (print_main_table): Use fprintf_vma to print long long fields.
1555 (main): Mark argv paramter as unused. Convert to old style definition.
1556 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1557 * ia64-asmtab.c: Regnerate.
1559 2000-12-09 Nick Clifton <nickc@redhat.com>
1561 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1564 * fr30-dis.c: Regenerate.
1566 2000-12-08 Peter Targett <peter.targett@arccores.com>
1568 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1569 * Makefile.am (C_FILES): Add arc-ext.c.
1570 (ALL_MACHINES) Add arc-ext.lo.
1571 (INCLUDES) Add opcode directory to list.
1572 New dependency entry for arc-ext.lo.
1573 * disassemble.c (disassembler): Correct call to
1574 arc_get_disassembler.
1575 * arc-opc.c: New update for ARC, including full base
1576 instructions for ARC variants.
1577 * arc-dis.h, arc-dis.c: New update for ARC, including
1578 extensibility functionality.
1579 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1581 2000-12-03 Chris Demetriou cgd@sibyte.com
1583 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1584 MOD_HILO, and MOD_LO macros.
1586 * mips-opc.c (M1, M2): Delete.
1587 (mips_builtin_opcodes): Remove all uses of M1.
1589 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1590 instructions take "G" format second operands and use the
1592 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1594 Delete "sel" code operands from mfc1 and mtc1.
1595 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1598 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1599 Chris Demetriou cgd@sibyte.com
1601 * mips-opc.c (mips_builtin_opcodes): Finish additions
1602 for MIPS32 support, and clean up existing entries for
1603 aesthetics, consistency with the MIPS32 ISA, and
1604 with consistency the rest of the table.
1606 2000-12-01 Nick Clifton <nickc@redhat.com>
1608 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1611 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1613 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1614 specifiers. Update 'B' for new constant names, and remove
1616 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1617 near the top of the array, so they are disassembled properly.
1618 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1619 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1620 specifier. Add 'H' format specifier variants for "mfc1,"
1621 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1622 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1623 "wait" variant which uses 'J' operand specifier.
1625 * mips-dis.c (set_mips_isa_type): Update to use
1626 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1627 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1628 * mips-opc.c (I32): New constant for instructions added in
1631 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1633 * mips-dis.c (set_mips_isa_type): Add cases for
1634 bfd_mach_mips5 and bfd_mach_mips64.
1635 * mips-opc.c (I64): New definitions.
1637 * mips-dis.c (set_mips_isa_type): Add case for
1640 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1642 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1643 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1644 Initialize variable dc to NULL.
1645 (print_insn_shx): Remove unused label d_reg_n.
1647 2000-11-24 Nick Clifton <nickc@redhat.com>
1649 * arm-opc.h: Add new opcode formatting parameter 'B'.
1650 (arm_opcodes): Add XScale, v5, and v5te instructions.
1651 (thumb_opcodes): Add v5t instructions.
1653 * arm-dis.c (print_insn_arm): Handle new 'B' format
1655 (print_insn_thumb): Decode BLX(1) instruction.
1657 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1659 * mips-opc.c: Fix file header comment.
1661 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1663 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1664 print_insn_cris_with_register_prefix.
1666 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1668 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1670 2000-11-07 Matthew Green <mrg@redhat.com>
1672 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1673 must be loaded there in their entirety.
1675 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1677 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1678 (compute_arch_mask): Add v8plusb and v9b machines.
1679 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1680 * sparc-opc.c: Support for Cheetah instruction set.
1681 (prefetch_table): Add #invalidate.
1683 2000-10-16 Nick Clifton <nickc@redhat.com>
1685 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1687 2000-10-06 Dave Brolley <brolley@redhat.com>
1689 * fr30-desc.h: Regenerate.
1690 * m32r-desc.h: Regenerate.
1691 * m32r-ibld.c: Regenerate.
1693 2000-10-05 Jim Wilson <wilson@redhat.com>
1695 * ia64-ic.tbl: Update from Intel.
1696 * ia64-asmtab.c: Regenerate.
1698 2000-10-04 Kazu Hirata <kazu@hxi.com>
1700 * ia64-gen.c: Convert C++-style comments to C-style comments.
1701 * tic54x-dis.c: Likewise.
1703 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1705 Changes to add dollar prefix to registers for files where user symbols
1706 don't have a leading underscore. Fix formatting.
1707 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1708 (format_reg): Add parameter with_reg_prefix. All callers changed.
1709 (print_with_operands): Ditto.
1710 (print_insn_cris_generic): Renamed from print_insn_cris, add
1711 parameter with_reg_prefix.
1712 (print_insn_cris_with_register_prefix,
1713 print_insn_cris_without_register_prefix, cris_get_disassembler):
1715 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1717 2000-09-22 Jim Wilson <wilson@redhat.com>
1719 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1720 gt, ge, ngt, and nge.
1721 * ia64-asmtab.c: Regenerate.
1723 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1724 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1725 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1726 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1727 * ia64-asmtab.c: Regnerate.
1729 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1731 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1732 Add mfc0 and mtc0 with sub-selection values.
1733 Add clo and clz opcodes.
1734 Add msub and msubu instructions for MIPS32.
1735 Add madd/maddu aliases for mad/madu for MIPS32.
1736 Support wait, deret, eret, movn, pref for MIPS32.
1737 Support tlbp, tlbr, tlbwi, tlbwr.
1740 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1741 (print_insn_arg): Handle 'H' args.
1742 (set_mips_isa_type): Recognize 4K.
1743 Use CPU_* defines instead of hardcoded numbers.
1745 2000-09-11 Catherine Moore <clm@redhat.com>
1747 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1748 (d30v_format_tab): Use Rb2 for modinc and moddec.
1750 2000-09-07 Catherine Moore <clm@redhat.com>
1752 * d30v-opc.c (d30v_format_tab): Use format Ra for
1755 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1757 * configure: Rebuilt with new libtool.m4.
1759 2000-09-05 Nick Clifton <nickc@redhat.com>
1761 * configure: Regenerate.
1762 * po/opcodes.pot: Regenerate.
1764 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1766 * acinclude.m4: Include libtool and gettext macros from the
1768 * aclocal.m4, configure: Rebuilt.
1770 2000-08-30 Kazu Hirata <kazu@hxi.com>
1772 * tic80-dis.c: Fix formatting.
1774 2000-08-29 Kazu Hirata <kazu@hxi.com>
1776 * w65-dis.c: Fix formatting.
1778 2000-08-28 Mark Hatle <mhatle@mvista.com>
1780 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1781 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1782 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1783 instructions. Added extended mnemonic mftbl as defined in the
1784 405GP manual for all PPCs.
1786 2000-08-28 Jim Wilson <wilson@redhat.com>
1788 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1789 call. Change last goto to use failed instead of done.
1791 2000-08-28 Dave Brolley <brolley@redhat.com>
1793 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1794 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1795 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1796 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1797 * cgen-dis.in (read_insn): New static function.
1798 (print_insn): Use read_insn to read the insn into the buffer and set
1800 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1802 * fr30-asm.c: Regenerated.
1803 * fr30-desc.c: Regenerated.
1804 * fr30-desc.h: Regenerated.
1805 * fr30-dis.c: Regenerated.
1806 * fr30-ibld.c: Regenerated.
1807 * fr30-opc.c: Regenerated.
1808 * fr30-opc.h: Regenerated.
1809 * m32r-asm.c: Regenerated.
1810 * m32r-desc.c: Regenerated.
1811 * m32r-desc.h: Regenerated.
1812 * m32r-dis.c: Regenerated.
1813 * m32r-ibld.c: Regenerated.
1814 * m32r-opc.c: Regenerated.
1816 2000-08-28 Kazu Hirata <kazu@hxi.com>
1818 * tic30-dis.c: Fix formatting.
1820 2000-08-27 Kazu Hirata <kazu@hxi.com>
1822 * sh-dis.c: Fix formatting.
1824 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1826 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1828 2000-08-24 Kazu Hirata <kazu@hxi.com>
1830 * z8k-dis.c: Fix formatting.
1832 2000-08-16 Jim Wilson <wilson@redhat.com>
1834 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1835 break, mov-immediate, nop.
1836 * ia64-opc-f.c: Delete fpsub instructions.
1837 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1838 address operand. Rewrite using macros to avoid long lines.
1839 * ia64-opc.h (POSTINC): Define.
1840 * ia64-asmtab.c: Regenerate.
1842 2000-08-15 Jim Wilson <wilson@redhat.com>
1844 * ia64-ic.tbl: Add missing entries.
1846 2000-08-08 Jason Eckhardt <jle@redhat.com>
1848 * i860-dis.c (print_br_address): Change third argument from int
1851 2000-08-07 Richard Henderson <rth@redhat.com>
1853 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1854 for MLI templates. Handle IA64_OPND_TGT64.
1856 2000-08-04 Ben Elliston <bje@redhat.com>
1858 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1859 * cgen.sh: Likewise.
1861 2000-08-02 Jim Wilson <wilson@redhat.com>
1863 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1865 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1867 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1868 Change return type from void to int. Check the combination
1869 of operands, return 1 if valid. Fix to avoid BUF overflow.
1870 Report undefined combinations of operands in COMMENT.
1871 Report internal errors to stderr. Output the adiw/sbiw
1872 constant operand in both decimal and hex.
1873 (print_insn_avr): Disassemble ldd/std with displacement of 0
1874 as ld/st. Check avr_operand () return value, handle invalid
1875 combinations of operands like unknown opcodes.
1877 2000-07-28 Ben Elliston <bje@redhat.com>
1879 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1880 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1881 * Makefile.in: Regenerate.
1882 * configure.in: Add --enable-cgen-maint option.
1883 * configure: Regenerate.
1885 2000-07-26 Dave Brolley <brolley@redhat.com>
1887 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1888 (cgen_hw_lookup_by_num): Ditto.
1889 (cgen_operand_lookup_by_name): Ditto.
1890 (print_address): Ditto.
1891 (print_keyword): Ditto.
1892 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1894 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1896 (cgen_parse_keyword): Ditto.
1898 2000-07-22 Jason Eckhardt <jle@redhat.com>
1900 * i860-dis.c: New file.
1901 (print_insn_i860): New function.
1902 (print_br_address): New function.
1903 (sign_extend): New function.
1904 (BITWISE_OP): New macro.
1905 (I860_REG_PREFIX): New macro.
1906 (grnames, frnames, crnames): New structures.
1908 * disassemble.c (ARCH_i860): Define.
1909 (disassembler): Add check for bfd_arch_i860 to set disassemble
1910 function to print_insn_i860.
1912 * Makefile.in (CFILES): Added i860-dis.c.
1913 (ALL_MACHINES): Added i860-dis.lo.
1914 (i860-dis.lo): New dependences.
1916 * configure.in: New bits for bfd_i860_arch.
1918 * configure: Regenerated.
1920 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1922 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1923 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1924 (cris-dis.lo, cris-opc.lo): New rules.
1925 * Makefile.in: Rebuild.
1926 * configure.in (bfd_cris_arch): New target.
1927 * configure: Rebuild.
1928 * disassemble.c (ARCH_cris): Define.
1929 (disassembler): Support ARCH_cris.
1930 * cris-dis.c, cris-opc.c: New files.
1931 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1933 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1935 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1936 Reported by Bill Clarke <llib@computer.org>.
1938 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1940 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1941 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1943 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1945 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1946 fput_const, extract_3, extract_5_load, extract_5_store,
1947 extract_5r_store, extract_5R_store, extract_10U_store,
1948 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1949 extract_12, extract_17, extract_22): Prototype.
1950 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1951 shadowing outer block.
1954 2000-07-05 DJ Delorie <dj@redhat.com>
1958 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1960 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1962 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1964 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1965 marked for translation (exception from the usual coding style).
1966 (print_insn_avr): Initialize insn2 to avoid warnings.
1968 2000-07-03 Kazu Hirata <kazu@hxi.com>
1970 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1971 * h8500-dis.c: Fix formatting.
1973 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1975 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1976 (CLEANFILES): Add DEPA.
1977 * Makefile.in: Regenerate.
1979 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1981 * arm-dis.c (regnames): Add an additional register set to match
1982 the set used by GCC. Make it the default.
1984 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1986 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1988 * Makefile.in: Regenerate.
1990 2000-06-20 H.J. Lu <hjl@gnu.org>
1992 * Makefile.am: Rebuild dependency.
1993 * Makefile.in: Rebuild.
1995 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1997 * Makefile.in, configure: regenerate
1998 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2000 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2002 * configure.in: Recognize m68hc12 and m68hc11.
2003 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2004 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2005 and opcode generation for m68hc11 and m68hc12.
2007 2000-06-16 Nick Duffek <nsd@redhat.com>
2009 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2010 bfd_mach_ppc_620 instead of 620.
2012 2000-06-12 Kazu Hirata <kazu@hxi.com>
2014 * h8300-dis.c: Fix formatting.
2015 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2018 2000-06-09 Denis Chertykov <denisc@overta.ru>
2020 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2022 2000-06-07 Denis Chertykov <denisc@overta.ru>
2024 * avr-dis.c: completely rewritten.
2026 2000-06-02 Kazu Hirata <kazu@hxi.com>
2028 * h8300-dis.c: Follow the GNU coding style.
2029 (bfd_h8_disassemble) Fix a typo.
2031 2000-06-01 Kazu Hirata <kazu@hxi.com>
2033 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2034 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2035 correctly. Fix a typo.
2037 2000-05-31 Nick Clifton <nickc@redhat.com>
2039 * opintl.h (_(String)): Explain why dgettext is used instead of
2042 2000-05-30 Nick Clifton <nickc@redhat.com>
2044 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2045 bindtextdomain): Replace defines with those from intl/libgettext.h
2046 to quieten gcc warnings.
2048 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2050 * Makefile.am: Update dependencies with "make dep-am"
2051 * Makefile.in: Regenerate.
2053 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2055 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2056 sign-extending operands.
2058 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2060 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2063 2000-05-21 Nick Clifton <nickc@redhat.com>
2065 * Makefile.am (LIBIBERTY): Define.
2067 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2069 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2070 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2071 (reg_names): Rename to std_reg_names. Change it to a char **
2073 (std_reg_names): New name for reg_names.
2074 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2077 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2079 * fr30-desc.h: Partially regenerated to account for changed
2080 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2081 * m32r-desc.h: Ditto.
2083 2000-05-15 Nick Clifton <nickc@redhat.com>
2085 * arm-opc.h: Use upper case for flasg in MSR and MRS
2086 instructions. Allow any bit to be set in the field_mask of
2087 the MSR instruction.
2089 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2090 field_mask of an MSR instruction.
2092 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2094 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2095 instructions changed to ldrsb/ldrsh.
2097 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2099 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2100 target addresses for 'jal' and 'j'.
2102 2000-05-10 Geoff Keating <geoffk@redhat.com>
2104 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2105 also available in common mode when powerpc syntax is being used.
2107 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2109 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2110 (dummy_print_address): Ditto.
2112 2000-05-04 Timothy Wall <twall@redhat.com>
2114 * tic54x-opc.c: New.
2115 * tic54x-dis.c: New.
2116 * disassemble.c (disassembler): Add ARCH_tic54x.
2117 * configure.in: Added tic54x target.
2119 * Makefile.am: Add tic54x dependencies.
2120 * Makefile.in: Ditto.
2122 2000-05-03 J.T. Conklin <jtc@redback.com>
2124 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2125 vector unit operands.
2126 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2127 unit instruction formats.
2128 (PPCVEC): New macro, mask for vector instructions.
2129 (powerpc_operands): Add table entries for above operand types.
2130 (powerpc_opcodes): Add table entries for vector instructions.
2132 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2133 (print_insn_little_powerpc): Likewise.
2134 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2136 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2138 * configure.in: Add bfd_powerpc_64_arch.
2139 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2142 2000-04-24 Nick Clifton <nickc@redhat.com>
2144 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2147 2000-04-23 Denis Chertykov <denisc@overta.ru>
2149 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2151 (reg_fmul_r): New. Extract source register from FMUL instruction.
2152 (reg_muls_d): New. Extract destination register from MULS instruction.
2153 (reg_muls_r): New. Extract source register from MULS instruction.
2154 (reg_movw_d): New. Extract destination register from MOVW instruction.
2155 (reg_movw_r): New. Extract source register from MOVW instruction.
2156 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2157 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2159 2000-04-22 Timothy Wall <twall@redhat.com>
2161 * ia64-gen.c (general): Add an ordered table of primary
2162 opcode names, as well as priority fields to disassembly data
2163 structures to enforce a preferred disassembly format based on the
2164 ordering of the opcode tables.
2165 (load_insn_classes): Show a useful message if IC tables are missing.
2166 (load_depfile): Ditto.
2167 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2168 distinguish preferred disassembly.
2169 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2170 format. Fix incorrect flag on fma.s/fma.s.s0.
2171 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2172 the highest priority.
2173 * ia64-opc-b.c: Use more abbreviations.
2174 * ia64-asmtab.c: Regenerate.
2176 2000-04-21 Jason Eckhardt <jle@redhat.com>
2178 * hppa-dis.c (extract_16): New function.
2179 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2180 new operand types l,y,&,fe,fE,fx.
2182 2000-04-21 Richard Henderson <rth@redhat.com>
2183 David Mosberger <davidm@hpl.hp.com>
2184 Timothy Wall <twall@redhat.com>
2185 Bob Manson <manson@charmed.cygnus.com>
2186 Jim Wilson <wilson@redhat.com>
2188 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2189 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2190 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2192 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2193 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2194 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2195 * Makefile.in: Rebuild.
2196 * configure Rebuild.
2197 * configure.in (bfd_ia64_arch): New target.
2198 * disassemble.c (ARCH_ia64): Define.
2199 (disassembler): Support ARCH_ia64.
2200 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2201 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2202 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2203 ia64-war.tbl, ia64-waw.tbl: New files.
2205 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2207 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2208 (disassemble): Use them.
2210 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2212 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2213 * Makefile.am: Update dependencies.
2214 * Makefile.in: Regenerate.
2216 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2218 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2219 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2220 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2221 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2222 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2223 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2224 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2225 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2226 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2227 ansidecl.h as sysdep.h includes it.
2229 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2231 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2232 --enable-build-warnings option.
2233 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2234 * Makefile.in, configure: Re-generate.
2236 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2238 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2239 stc GBR,@-<REG_N> is available for arch_sh1_up.
2240 Group parallel processing insn with identical mnemonics together.
2241 Make three-operand psha / pshl come first.
2243 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2245 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2246 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2247 (sh_arg_type): Add A_PC.
2248 (sh_table): Update entries using immediates. Add repeat.
2249 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2250 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2252 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2254 * po/opcodes.pot: Regenerate.
2256 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2257 (DEP): Quote when passing vars to sub-make. Add warning message
2259 (DEP1): Rewrite for "gcc -MM".
2260 (CLEANFILES): Add DEP2.
2261 Update dependencies.
2262 * Makefile.in: Regenerate.
2264 2000-04-03 Denis Chertykov <denisc@overta.ru>
2266 * avr-dis.c: Syntax cleanup.
2267 (add0fff): Print the pc relative address as a signed number.
2268 (add03f8): Likewise.
2270 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2272 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2273 the parameter ATTRIBUTE_UNUSED.
2274 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2276 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2278 * m10300-opc.c: SP-based offsets are always unsigned.
2280 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2282 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2283 [branch always] instead of "undefined".
2285 2000-03-27 Nick Clifton <nickc@redhat.com>
2287 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2288 short instructions, from end of list of long instructions.
2290 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2292 * Makefile.am (CFILES): Add avr-dis.c.
2293 (ALL_MACHINES): Add avr-dis.lo.
2295 2000-03-27 Alan Modra <alan@linuxcare.com>
2297 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2299 (print_insn_avr): Call function via pointer in K&R compatible way.
2300 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2301 add0fff, add03f8): Convert to old style function declaration and
2303 (avrdis_opcode): Add prototype.
2305 2000-03-27 Denis Chertykov <denisc@overta.ru>
2307 * avr-dis.c: New file. AVR disassembler.
2308 * configure.in (bfd_avr_arch): New architecture support.
2309 * disassemble.c: Likewise.
2310 * configure: Regenerate.
2312 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2314 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2316 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2318 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2319 flag to determine if operand is pc-relative.
2321 (d30v_format_table):
2322 (REL6S3): Renamed from IMM6S3.
2323 Added flag OPERAND_PCREL.
2324 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2325 added flag OPERAND_PCREL.
2326 (IMM12S3U): Replaced with REL12S3.
2327 (SHORT_D2, LONG_D): Delay target is pc-relative.
2328 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2329 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2330 using the REL* operands.
2331 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2332 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2333 LONG_Db, using REL* operands.
2334 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2335 (d30v_opcode_table): Use new *r formats.
2337 2000-02-28 Nick Clifton <nickc@redhat.com>
2339 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2340 'signed_overflow_ok_p'.
2342 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2344 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2345 name of the libtool directory.
2346 * Makefile.in: Rebuild.
2348 2000-02-24 Nick Clifton <nickc@redhat.com>
2350 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2351 (cgen_clear_signed_overflow_ok): New function.
2352 (cgen_signed_overflow_ok_p): New function.
2354 2000-02-23 Andrew Haley <aph@redhat.com>
2356 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2357 m32r-ibld.c, m32r-opc.h: Rebuild.
2359 2000-02-23 Linas Vepstas <linas@linas.org>
2361 * i370-dis.c, i370-opc.c: New.
2363 * disassemble.c (ARCH_i370): Define.
2364 (disassembler): Handle it.
2366 * Makefile.am: Add support for Linux/IBM 370.
2367 * configure.in: Likewise.
2369 * Makefile.in: Regenerate.
2370 * configure: Likewise.
2372 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2374 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2375 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2378 2000-02-22 Andrew Haley <aph@redhat.com>
2380 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2382 * mips-opc.c (G6): New define.
2383 (mips_builtin_op): Add "move" definition for -gp32.
2385 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2387 From Grant Erickson <gerickso@Brocade.COM>:
2388 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2390 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2392 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2395 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2397 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2398 (print_insn_ppi): Likewise.
2399 (print_insn_shx): Use info->mach to select appropriate insn set.
2400 Add support for sh-dsp. Remove FD_REG_N support.
2401 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2402 (sh_arg_type): Likewise. Remove FD_REG_N.
2403 (sh_dsp_reg_nums): New enum.
2404 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2405 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2406 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2407 (arch_sh3_dsp_up): Likewise.
2408 (sh_opcode_info): New field: arch.
2409 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2410 D_REG_N. Fill in arch field. Add sh-dsp insns.
2412 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2414 * arm-dis.c: Change flavor name from atpcs-special to
2415 special-atpcs to prevent name conflict in gdb.
2416 (get_arm_regname_num_options, set_arm_regname_option,
2417 get_arm_regnames): New functions. API to access the several
2418 flavor of register names. Note: Used by gdb.
2419 (print_insn_thumb): Use the register name entry from the currently
2420 selected flavor for LR and PC.
2422 2000-02-10 Nick Clifton <nickc@redhat.com>
2424 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2426 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2427 "mulsh.h" instructions.
2428 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2430 (print_insn_mcore): Add support for little endian targets.
2431 Add support for MULSH and OPSR classes.
2433 2000-02-07 Nick Clifton <nickc@redhat.com>
2435 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2436 Previous delat did not take.
2438 2000-02-03 Timothy Wall <twall@redhat.com>
2440 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2441 to adjust target address bounds checking and calculate the
2442 appropriate octet offset into data.
2444 2000-01-27 Nick Clifton <nickc@redhat.com>
2446 * arm-dis.c: (parse_disassembler_option): Rename to
2447 parse_arm_disassembler_option and allow to be exported.
2449 * disassemble.c (disassembler_usage): New function: Print out any
2450 target specific disassembler options.
2451 Call arm_disassembler_options() if the ARM architecture is being
2454 * arm-dis.c (NUM_ELEM): Define this macro if not already
2456 (arm_regname): New struct type for ARM register names.
2457 (arm_toggle_regnames): Delete.
2458 (parse_disassembler_option): Use register name structure.
2459 (print_insn): New function: Combines duplicate code found in
2460 print_insn_big_arm and print_insn_little_arm.
2461 (print_insn_big_arm): Call print_insn.
2462 (print_insn_little_arm): Call print_insn.
2463 (print_arm_disassembler_options): Display list of supported,
2464 ARM specific disassembler options.
2466 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2468 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2469 ARM_STT_16BIT flag as Thumb code symbols.
2471 * arm-dis.c (printf_insn_little_arm): Ditto.
2473 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2475 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2476 of raw thumb instructions.
2478 2000-01-20 Nick Clifton <nickc@redhat.com>
2480 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2482 2000-01-03 Nick Clifton <nickc@cygnus.com>
2484 * arm-dis.c (streq): New macro.
2485 (strneq): New macro.
2486 (force_thumb): ew local variable.
2487 (parse_disassembler_option): New function: Parse a single, ARM
2488 specific disassembler command line switch.
2489 (parse_disassembler_option): Call parse_disassembler_option to
2490 parse individual command line switches.
2491 (print_insn_big_arm): Check force_thumb.
2492 (print_insn_little_arm): Check force_thumb.
2494 For older changes see ChangeLog-9899
2500 version-control: never