2 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
4 * mn10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
6 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
7 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
9 * mn10300-opc.c (IMM32_HIGH8_MEM): New operand type.
10 (mn10300_opcodes): Reorder so as to try and select opcodes from
11 the core chip when multiple alternatives exist. Change several
12 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
13 "macbu" instructions. Fix typos in a couple DSP instructions too.
16 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
18 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
19 related to sign extension and the size of ints.
21 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
23 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
24 instructions. Support (sp) addressing mode by expanding it into
28 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
30 * m10300-opc.c: Support 4 byte DSP instructions.
33 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
35 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
38 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
40 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
43 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
45 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
48 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
50 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
54 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
56 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
59 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
61 * mips-dis.c (print_insn_little_mips): Previously, instruction
62 printing references the symbol table to determine whether the
63 instruction resides in a block regular instructions or mips16
64 instructions. However, when the disassembler gets used in other
65 environments where the symbol table is not present, we no longer
66 rely in the symbol table, rather, use the low bit of the
67 instructions address to guess. There should be no change for usage
68 of the disassembler in host based programse, gdb ,objdump.
69 (print_insn_big_mips): ditto.
70 (print_insn_mips): ditto
72 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
74 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
76 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
79 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
80 operands for the am33.
81 (mn10300_opcodes): Add new instructions from the am33.
83 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
85 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
87 * i386-dis.c (index16): Add '%' to register names. Use ','
90 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
92 * i386-dis.c: Don't print opcode suffix when we can figure out the
93 size (and gas can!) by register operands, or from the default
95 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
97 (dis386, dis386_twobyte, grps): Use new suffix macros.
98 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
99 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
100 order of cmps operands to agree with Intel docs. Correct operand
101 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
102 agree with Intel docs.
103 (print_insn_x86): Print orphan fwait before other prefixes.
104 Return correct byte count for orphan fwait with prefixes. Don't
105 print `bound' operands in reverse order.
106 (ckprefix): Stop accumulating prefixes if we get fwait.
107 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
109 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
111 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
112 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
114 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
116 Fix problems when bfd_vma is wider than long.
117 * i386-dis.c: Make op_address and start_pc unsigned.
118 (set_op): Make parameter unsigned.
119 (print_insn_x86): Cast to bfd_vma when passing a value to
121 * ns32k-dis.c (CORE_ADDR): Don't define.
122 (print_insn_ns32k): Change type of addr to bfd_vma. Use
123 bfd_scan_vma to read back address.
124 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
126 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
127 (NEXTULONG): New definition.
128 (print_insn_m68k): Avoid overflow when computing third argument of
130 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
131 Use disp instead of val to store offset values.
132 (print_indexed): Use base_disp instead of word to store base
133 displacement, to avoid overflow.
134 * m10300-dis.c (disassemble): Cast value to long when computing
135 pc-relative address, to get correct sign extension.
137 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
139 * m32r-opc.c: Regenerate.
141 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
143 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
144 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
146 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
148 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
150 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
152 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
154 (OP_DSreg): Rename from OP_DSSI.
155 (OP_ESreg): Rename from OP_ESDI.
156 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
158 (append_seg): Rename from append_prefix.
159 (ptr_reg): New function.
160 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
162 (PREFIX_ADDR): Rename from PREFIX_ADR.
163 (float_reg): Add non-broken opcodes for people who don't want
166 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
168 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
171 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
173 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
175 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
177 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
178 0; produce error message for shifts of size 32 (or 64 for 64-bit
179 shifts), because the hardware doesn't support them.
182 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
184 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
187 * vu0.h (sqc2): Fix opcode.
189 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
193 start-sanitize-vr5400
194 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
196 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
197 Change pinfo to use WR_HILO.
201 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
203 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
204 LONG_2, LONG_2b formats to use this new operand.
207 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
209 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
211 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
213 * sparc-dis.c (print_insn_sparc): big endian instruction / little
217 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
219 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
220 and SHORT_B3b formats to use Rb instead of Ra.
222 Add FLAG_MUL16 to MUL2XH opcode.
224 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
225 to existing 1.1.1 parallelisation prohibition procedure.
228 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
230 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
231 * cgen-dis.in (extract_normal): Likewise.
232 * m32r-asm.c,m32r-dis.c: Regenerate.
235 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
237 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
241 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
243 * mips-opc.c (multu1): Add two operand variant for the r5900.
246 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
248 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
249 with a shift count of 0.
252 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
254 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
256 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
258 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
259 (_print_insn_mips): Likewise.
260 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
264 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
266 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
267 (cgen_hw_lookup_by_num): New function.
270 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
273 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
275 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
277 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
279 * sparc-dis.c (print_insn_sparc): Always fetch instructions
280 as big-endian on SPARClite.
283 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
285 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
287 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
292 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
294 * d30v-opc.c (pre_defined_register): Remove alias for r0.
298 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
300 * mips-opc.c (break): Added 20-bit single-operand break
301 instruction for R5900 only.
304 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
306 * po/Make-in (install-info): New target.
308 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
310 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
311 * configure: Rebuild.
313 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
315 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
316 variety of ISA2 instructions to set bottom ten bits of trap code.
318 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
320 * Makefile.am (config.status): Add explicit target so that
321 config.status depends upon bfd/configure.in.
322 * Makefile.in: Rebuild.
324 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
326 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
327 instructions to set bottom ten bits of break code.
328 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
329 for above optional argument.
331 start-sanitize-cygnus
332 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
334 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
335 * m32r-opc.h: Regenerate.
338 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
340 * makefile.vms: Run dec c with /nodebug.
342 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
344 * Makefile.in: Rebuilt.
345 * Makefile.am: Regenerated dependencies with mkdep.
347 * opintl.h (_): Define as dgettext.
349 start-sanitize-cygnus
350 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
352 * configure.in: Add support for --enable-cgen-maint.
353 * Makefile.am (M32R_DEPS): New variable.
354 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
355 * aclocal.m4: Regenerate.
356 * Makefile.in: Regenerate.
357 * configure: Regenerate.
359 * Makefile.am (CGENFILES): Add minsn.scm.
362 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
364 * cgen-asm.c: Internationalised.
365 start-sanitize-cygnus
366 * cgen-asm.in: Internationalised.
367 * cgen-opc.in: Internationalised.
369 * m32r-asm.c: Internationalised.
370 * m32r-dis.c: Internationalised.
371 * m32r-opc.c: Internationalised.
373 * aclocal.m4: Regenerated.
374 * configure: Regenerated.
375 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
376 * Makefile.in: Rebuild.
377 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
378 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
380 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
382 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
384 * aclocal.m4, configure: Rebuild with current tools.
386 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
388 * opintl.h: New file - contains internationalisation macros used
389 by source files in this directory.
390 * po/: New subdirectory - contains internationalisation files.
391 * po/Make-in: New file - Makefile constructor.
392 * po/POTFILES.in: New file - list of files in opcodes directory
393 that should be scan for internationalisation macros.
394 * po/opcodes.pot: New file - list of internationisation strings
395 found in files mentioned in po/POTFILES.in.
396 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
397 entry. Add intl directory to include paths.
398 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
399 HAVE_STRCPY, HAVE_LC_MESSAGES
400 * configure.in: Add rule to build Makefile in po subdirectory.
401 * Makefile.in: Rebuilt.
402 * aclocal.m4: Rebuilt.
403 * config.in: Rebuilt.
404 * configure: Rebuilt.
405 * alpha-opc.c: Internationalised.
406 * arc-dis.c: Internationalised.
407 * arc-opc.c: Internationalised.
408 * arm-dis.c: Internationalised.
409 * cgen-asm.c: Internationalised.
411 * d30v-dis.c: Internationalised.
413 * dis-buf.c: Internationalised.
415 * dvp-dis.c: Internationalised.
416 * dvp-opc.c: Internationalised.
418 * h8300-dis.c: Internationalised.
419 * h8500-dis.c: Internationalised.
420 * i386-dis.c: Internationalised.
421 * m10200-dis.c: Internationalised.
422 * m10300-dis.c: Internationalised.
423 * m68k-dis.c: Internationalised.
424 * m88k-dis.c: Internationalised.
425 * mips-dis.c: Internationalised.
426 * ns32k-dis.c: Internationalised.
427 * opintl.h: Internationalised.
428 * ppc-opc.c: Internationalised.
429 * sparc-dis.c: Internationalised.
430 * v850-dis.c: Internationalised.
431 * v850-opc.c: Internationalised.
433 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
435 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
436 (asm_hash_table_entries): New variable.
437 (cgen_asm_init): Free asm_hash_table_entries.
438 (hash_insn_array,hash_insn_list): New functions.
439 (build_asm_hash_table): Use them. Hash macro insns as well.
440 (cgen_asm_lookup_insn): Update.
441 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
442 (dis_hash_table_entries): New variable.
443 (cgen_dis_init): Free dis_hash_table_entries.
444 (hash_insn_array,hash_insn_list): New functions.
445 (build_dis_hash_table): Use them. Hash macro insns as well.
446 (cgen_dis_lookup_insn): Update.
447 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
448 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
449 (cgen_macro_insn_count): New function.
450 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
451 All callers updated. Sanity check result of extract fn.
452 (@arch@_cgen_get_insn_operands): Change result type to void.
453 Delete args insn_value, length. New arg fields. All callers updated.
454 (@arch@_cgen_lookup_get_insn_operands): New function.
455 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
457 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
459 * i386-dis.c (OP_DSSI): Print segment override.
462 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
464 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
468 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
470 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
474 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
476 * vu0.h (vlqd, vlqi): Update per revised specs.
480 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
482 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
483 (vif_operands): Update.
484 (vif_get_unpackloc): Delete.
485 (state_vif_unpackloc{,_star_p}): Delete.
486 (dvp_opcode_init_parse): Update.
487 (vif_unpack_len_value): Avoid divide by zero.
491 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
493 * vu0.h: Specs changed for VCALLMSR bit pattern.
494 * mips-dis.c: (print_insn_arg) Matching change.
497 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
499 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
502 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
504 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
505 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
506 * configure.in: Define and substitute WIN32LDFLAGS and
508 * aclocal.m4: Rebuild with new libtool.
509 * configure, Makefile.in: Rebuild.
512 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
514 * vu0.h: Corrected bit pattern for VMAXI opcode.
517 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
519 * m32r-opc.c: Regenerate.
522 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
524 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
525 (dvp_expand_macro): Implement.
526 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
527 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
530 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
532 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
533 before trying to copy it.
534 * Makefile.in: Rebuild.
536 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
538 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
541 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
543 * m32r-opc.c: Fix bit patterns for SAT and SATB.
546 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
548 * ns32k-dis.c (bit_extract_simple): New function to extract bits
549 from an arbitrary valid buffer instead of fetching them on demand
551 (invalid_float): use bit_extract_simple() instead of bit_extract().
554 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
556 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
557 * m32r-opc.h: Add extra control registers.
560 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
562 From H.J. Lu <hjl@gnu.org>:
563 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
566 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
568 * Branched binutils 2.9.
571 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
573 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
574 disassembling last 4 bytes of a section.
577 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
579 Fix some gcc -Wall warnings:
580 * arc-dis.c (print_insn): Add casts to avoid warnings.
581 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
582 * d10v-dis.c (dis_long, dis_2_short): Likewise.
584 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
585 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
586 (parse_bc, parse_vfreg, parse_accdest): Likewise.
587 (parse_ffstreg, parse_vif_mode): Likewise.
589 * m10200-dis.c (disassemble): Likewise.
590 * m10300-dis.c (disassemble): Likewise.
591 * ns32k-dis.c (print_insn_ns32k): Likewise.
592 * ppc-opc.c (insert_ral, insert_ram): Likewise.
593 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
594 * cgen-opc.c (cgen_keyword_search_next): Likewise.
595 * d10v-dis.c (dis_long, dis_2_short): Likewise.
597 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
600 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
601 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
602 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
604 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
606 * tic80-dis.c (print_one_instruction): Likewise.
608 * w65-dis.c (print_operand): Likewise.
609 * z8k-dis.c (fetch_data): Likewise.
610 * a29k-dis.c: Add return type for find_byte_func_type.
611 * arc-opc.c: Include <stdio.h>. Remove declarations of
612 insert_multshift and extract_multshift.
614 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
616 (extract_value): Fully parenthesize expression.
619 * dvp-opc.c: Include <ctype.h>.
620 (print_sdest): Add default case to switch.
622 * h8500-dis.c (print_insn_h8500): Initialize local variables.
623 * h8500-opc.h (h8500_table): Fully bracket initializer.
624 * w65-opc.h (optable): Likewise.
625 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
626 * i386-dis.c (OP_E): Initialize local variables.
627 * m10200-dis.c (print_insn_mn10200): Likewise.
628 * mips-dis.c (print_insn_mips16): Likewise.
629 * sh-dis.c (print_insn_shx): Likewise.
630 * v850-dis.c (print_insn_v850): Likewise.
631 * ns32k-dis.c (print_insn_arg): Declare.
632 (get_displacement, invalid_float): Declare.
633 (list_search, sign_extend, flip_bytes): Declare return type.
634 (get_displacement): Likewise.
635 (print_insn_arg): Likewise. Make d int. Fix sprintf format
637 (print_insn_ns32k): Make i unsigned.
638 (invalid_float): Make static. Declare type of val.
639 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
640 on each for iteration.
641 * tic30-dis.c (get_indirect_operand): Likewise.
642 * z8k-dis.c (print_insn_z8001): Declare return type.
643 (print_insn_z8002): Likewise.
644 (unparse_instr): Fix sprintf format strings.
646 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
648 * mips-opc.c: Add "sync.l" and "sync.p".
651 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
653 * dvp-opc.c (extract_vif_datalen): Rewrite.
654 (vif_insn_len): Perform 0->max+1 conversion for direct length.
656 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
658 * dvp-dis.c (print_insn): Print unpack address in hex.
659 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
660 Don't skip over '*', just record it.
661 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
662 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
663 Don't skip over '*', just record it.
664 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
665 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
666 (vif_opcodes): Likewise.
667 (state_vif_{mpg,unpack}loc_star_p): New static locals.
668 (vif_macros,vif_macro_count): New globals.
669 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
670 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
671 (vif_get_wl_cl): New function.
672 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
675 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
677 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
678 default m68k variant to recognize.
680 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
681 (ctrl, cobr, mem, ea): Likewise.
682 (print_addr): Likewise. Remove cast.
683 (ea): Cast argument of print_addr to bfd_vma.
685 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
687 (cgen_parse_unsigned_integer): Likewise.
688 (cgen_parse_address): Likewise.
690 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
692 * i960-dis.c (ctrl): Add full braces to structure initialization.
693 (cobr, mem, reg): Likewise.
694 (ea): Correct parenthesization in expression.
696 * cgen-asm.c: Include <ctype.h>.
697 (build_asm_hash_table): Remove unused local variable i.
698 (cgen_parse_keyword): Add casts to avoid warnings.
700 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
701 symbol. Fix indentation.
702 (print_insn_little_arm): Likewise.
705 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
707 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
712 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
714 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
719 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
721 * dvp-opc.c (vif_operand_datalen_special): New global.
725 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
727 * vu0.h (vcallms): Use 'O' for call target operand.
728 * mips-dis.c (print_insn_arg): Handle 'O'.
731 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
733 * configure.in: Use AM_DISABLE_SHARED.
734 * aclocal.m4, configure: Rebuild with libtool 1.2.
737 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
739 * mips-dis.c: Change '%' to '#' in r5900 support.
743 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
745 These patches are courtesy of Jonathan Walton and Tony Thompson
746 (athompso@cambridge.arm.com).
748 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
751 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
752 both the offset and the label closest to the destination.
755 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
757 * vu0.h: New file with cop2/vu0 instructions.
758 * mips-opc.c: Include vu0.h.
759 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
761 (print_insn_mips): Do not emit a tab after an instruction if the
762 first arg is an instruction completer (&). If the next arg is an
763 escape character (%), then print the next arg verbatim.
764 * Makefile.am (mips-opc.lo): Depend on vu0.h
768 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
770 * dvp-opc.c (vif_opcodes): Add stcycl.
772 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
774 * dvp-dis.c (print_dma): Change length from 16 to 8.
777 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
779 * m32r-opc.h: Regenerate.
782 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
784 * dvp-opc.c (print_dest1): Print dest spec again.
785 (print_vfreg,print_accdest): Likewise.
786 (vif_unpack_len): Round result up to word boundary.
789 start-sanitize-vr4320
790 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
792 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
794 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
796 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
801 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
803 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
804 (print_insn): Do mask comparison on proper opcode word.
805 Print unsigned values in hex.
806 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
807 (parse_bc): Catch missing dest.
808 (parse_vfreg): Replace atoi call with strtol.
809 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
810 (parse_bcftreg,parse_ffstreg): Handle missing dest.
811 (extract_gif_eop): New function.
812 (gif_operands): Update eop entry.
813 (VGIFOP,VGIFNREGS): Fix calcs.
814 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
815 (gif_regs): Add entry for unused 11 case.
816 (print_gif_regs): Print empty list instead of nothing.
817 (extract_gif_nloop): Fix value calc.
818 (print_gif_nloop): Always print value, even if 0.
819 (insert_vif_wlcl,extract_vif_wlcl): New functions.
820 (vif_operands): Use them for wl,cl fields.
821 (state_vif_wl,state_vif_cl): New static locals.
822 (parse_vif_mode): Handle numeric args.
823 (vif_unpack_len_value,vif_unpack_len): New functions.
824 (vif_insn_len): Call vif_unpack_len.
827 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
829 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
831 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
833 * cgen-asm.in: Move insertion of generated routines to top of file.
834 (insert_normal): Add prototype. Delete `shift' arg.
835 * cgen-dis.in: Move insertion of generated routines to top of file.
836 (extract_normal): Add prototype. Delete `shift' arg.
837 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
838 (print_keyword): Add prototype. Fix type of `attrs' arg.
840 start-sanitize-vr4320
841 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
843 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
844 * mips-opc.c ("mac","dmac") : Added 4320 insns.
847 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
849 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
850 assume that info->symbols is non-empty.
852 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
854 * alpha-opc.c (cvtqs) There is no such thing.
855 (cvttq): Missing most of the /*d variants.
858 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
860 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
862 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
863 (r5900/msub.s): Takes three operands, not four. Fix opcode.
867 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
869 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
870 delayed branches or jumps.
874 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
876 * dvp-opc.c (vif_operands): Add unpack[u] support.
877 (vif_opcodes): Ditto.
878 (*_vif_imrubits): Renamed from *_vif_imrbits.
880 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
882 * dvp-dis.c (print_insn): Handle word number.
883 Handle mips address vs vu address.
884 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
885 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
886 ({insert,extract}_dma_addr): Fix word ofset.
887 ({insert,print}_gif_regs): Fix encode/decode.
890 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
892 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
894 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
895 * tic30-dis.c (print_branch): Likewise.
897 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
898 * dvp-dis.c (dvp_info_mach_type): New function.
899 (print_insn_dvp): Call it.
900 (print_vif): Return length of 4 if mpg or direct insn so following
901 insns get properly disabled.
902 (print_gif): Fix word order.
903 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
904 (gif_operands): Fix word order.
905 (gif_opcodes): Likewise.
906 ({insert,extract,print}_gif_regs): Likewise.
907 (gif_regs): Add new register number/name changes.
908 (dma_opcodes): Add dmarefe insn.
911 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
913 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
914 saved_symbol code as it is no longer needed.
916 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
918 * cgen-asm.c: Include symcat.h.
919 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
921 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
924 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
926 * dvp-opc.c (extra_dma_flags): Fix typos.
927 (dma_operands): Fix word numbers.
928 (dma_opcodes): Likewise.
929 ({insert,extract}_dma_flags): Likewise.
932 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
934 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
937 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
939 * dvp-dis.c (print_gif): Complete.
940 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
941 (state_gif_{nregs,regs,nloop}): New static locals.
943 (dvp_opcode_init_{parse,print}): Init gif state locals.
944 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
945 (vif_insn_len): Handle `unpack'.
946 ({insert,extract}_dma_flags): Complete.
950 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
952 * mips-opc.c (mula.s): Renamed from multa.s.
955 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
957 * m32r-opc.[ch]: Regenerate.
960 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
962 * dvp-opc.c (dma_operands): Rewrite.
963 (dma_operand_{count,addr}): New globals.
964 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
965 (insert_dma_addr): Insert value into insn.
966 (extract_dma_addr): Extract value from insn.
968 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
970 * dvp-dis.c (print_vu): Handle loi insns.
971 (print_insn): Likewise.
972 * dvp-opc.c (vu_lower_opcodes): Add "loi".
973 (vu_operands): Make LDEST1 a FAKE operand.
974 (parse_dest1): Allow elided argument.
975 (print_dest1): Don't print the argument.
977 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
979 * dvp-opc.c (parse_vfreg): Dest spec is optional.
980 (print_vfreg): Don't print dest spec.
981 (parse_accdest): Dest spec is optional.
982 (print_accdest): Don't print dest spec.
985 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
987 * Makefile.am (CGENFILES): Update.
988 * Makefile.in: Regenerate.
989 * cgen-asm.in (insert_normal): Result is error message now.
990 Validate value to be inserted.
991 (insert_insn_normal): Result is error message now.
992 (@arch@_cgen_assemble_insn): Update.
993 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
994 arguments. Don't perform validation here.
995 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
997 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
999 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1000 operand instance list.
1001 * m32r-opc.c: Regenerate.
1003 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1005 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1006 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1008 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1010 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1012 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1014 * configure.in: Get the version number from BFD.
1015 * configure: Rebuild.
1017 From H.J. Lu <hjl@gnu.org>:
1018 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1019 * Makefile.in: Rebuild.
1021 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1023 * m32r-opc.c: Regenerate.
1024 * m32r-opc.h: Regenerate.
1026 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1028 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1029 Ignore ALIAS insns if asked to.
1030 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1031 * m32r-opc.c: Regenerate.
1034 * dvp.opc.c: Nicely format opcode tables.
1035 (vu_operands): New element UFLAGS.
1036 (parse_uflags,print_uflags): New functions.
1037 (vu_upper_opcodes): Add UFLAGS to all insns.
1040 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1042 Fix rac to accept only a0:
1043 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1044 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1045 Introduce OPERAND_GPR.
1046 * d10v-dis.c (print_operand): Likewise.
1048 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1050 * cgen-opc.in: New file.
1051 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1052 * Makefile.am (CGENFILES): Add cgen-opc.in.
1053 * Makefile.in: Regenerate.
1055 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1056 (cgen_hw_lookup): Make result const.
1058 * cgen-dis.in (*): Use PTR instead of void *.
1059 (print_insn): Delete unused vars `i', `syntax'.
1061 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1064 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1066 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1067 (vif_opcodes): Update renamed insns.
1068 * dvp-dis.c (*): Likewise.
1071 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1073 * configure, aclocal.m4: Rebuild with new libtool.
1076 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1078 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1079 instructions use a PC relative branch, not absolute.
1082 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1084 * configure.in: Set libtool_enable_shared rather than
1085 libtool_shared. Remove diversion hack.
1086 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1088 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1090 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1091 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1093 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1095 * tic30-dis.c: New file.
1096 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1097 * configure.in: Handle bfd_tic30_arch.
1098 * Makefile.am: Rebuild dependencies.
1099 (CFILES): Add tic30-dis.c
1100 (ALL_MACHINES): Add tic30-dis.lo.
1101 * configure, Makefile.in: Rebuild.
1103 start-sanitize-m32rx
1104 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1106 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1107 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1108 macwhi-a and macwlo-a instructions.
1112 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1114 * dvp-opc.c, fixed encoding of a bunch of instructions to
1115 be consistent with the asmvu assembler (and inconsistent
1116 with the specification).
1118 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1120 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1121 in the opcode table. The pkemscalf instruction must come first.
1123 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1125 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1128 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1130 * m32r-opc.h (HAVE_CPU_M32R): Define.
1133 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1135 * dvp-dis.c, dvp-opc.c: New files.
1136 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1137 * configure: Regenerate.
1138 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1139 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1140 (mips-dis.lo): Compile with @archdefs@.
1141 * Makefile.in: Regenerate.
1142 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1143 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1146 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1148 * v850-opc.c (insertion routines): If both alignment and size is
1149 wrong then report this.
1151 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1153 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1154 Only recognize instructions for the current target_processor.
1156 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1158 * d10v-dis.c (PC_MASK): Correct value.
1159 (print_operand): If there's a reloc, don't calculate the
1160 address because they could be in different sections.
1162 start-sanitize-cygnus
1163 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1165 * cgen.sh: Rewrite to be like simulator's version.
1166 * Makefile.am (cgen): Update call to cgen.sh.
1167 * Makefile.in: Regenerate
1170 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1172 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1173 instruction after the 4650's "mul" instruction; nobody's using the
1174 4010 these days. If object files someday indicate which processor
1175 variant they're intended for, we can do a better job at this.
1177 start-sanitize-r5900
1178 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1180 * mips-opc.c (c.lt.s): Add r5900 variant.
1184 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1186 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1187 table provided entry size. Use CGEN_INSN_MNEMONIC.
1188 (cgen_parse_keyword): Rewrite.
1189 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1190 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1191 * cgen-opc.c: Clean up pass over `struct foo' usage.
1192 (cgen_keyword_lookup_value): Handle "" entry.
1193 (cgen_keyword_add): Likewise.
1194 start-sanitize-cygnus
1195 * Makefile.am: Add cgen support.
1196 * Makefile.in: Regenerate.
1197 * configure.in: Add cgen support.
1198 * configure: Regenerate.
1199 * aclocal.m4: Regenerate.
1200 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1203 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1205 * mips-opc.c: Add FP_D to s.d instruction flags.
1207 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1209 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1211 start-sanitize-tic80
1212 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1214 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1215 PC relative offset forms before the 15 bit forms. An assembler command
1216 line option now chooses the default.
1219 start-sanitize-r5900
1220 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1222 * mips-opc.c: Add many missing r5900 instructions.
1226 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1228 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1229 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1232 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1234 * configure: Only build libopcodes shared if --enable-shared's value
1235 was `yes', or was set to `*opcodes*'.
1236 * aclocal.m4: Likewise.
1237 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1238 original source of this bit of code. It's not clear what the best fix
1241 start-sanitize-r5900
1242 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1244 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1246 start-sanitize-tic80
1247 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1249 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1250 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1251 offset forms before the 15 bit forms, to default to the long forms.
1254 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1256 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1258 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1260 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1261 symbol if none is present.
1262 (print_insn_big_arm): Prevent examination of stored symbol if
1265 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1267 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1269 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1271 * disassemble.c: Remove disasm_symaddr() function.
1273 * arm-dis.c: Use info->symbol instead of info->flags to determine
1274 if disassmbly should be in Thumb or Arm mode.
1276 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1278 * arm-dis.c: Add support for disassembling Thumb opcodes.
1279 (print_insn_thumb): New function.
1281 * disassemble.c (disasm_symaddr): New function.
1283 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1284 (thumb_opcodes): Table of Thumb opcodes.
1286 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1288 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1290 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1291 and 'v' as operand types.
1293 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1295 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1296 <olivier.carmona@di.epfl.ch>.
1297 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1298 which has a two word opcode with a one word argument.
1301 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1303 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1304 unsigned, not signed.
1305 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1308 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1310 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1311 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1312 (ftrv): Slay the cut-and-paste monster.
1314 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1316 * d10v-dis.c (print_operand):
1317 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1319 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1321 * d10v-opc.c (OPERAND_FLAG): Split into:
1322 (OPERAND_FFLAG, OPERAND_CFLAG) .
1326 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1328 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1329 field for all INSN_MACRO's.
1330 * mips16-opc.c: same
1332 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1334 * mips-opc.c (sync,cache): These are 3900 insns.
1336 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1338 sh-opc.h (sh_table): Remove ftst/nan.
1340 start-sanitize-vr5400
1341 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1343 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1344 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1346 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1350 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1352 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1353 Add tx49 insns and configury.
1356 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1358 * mips-opc.c (ffc, ffs): Fix mask.
1361 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1363 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1367 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1369 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1370 start-sanitize-vr5400
1371 Added VR5400 instructions.
1372 (N5): New cpu-id macro.
1374 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1376 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1378 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1379 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1381 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1383 * v850-dis.c (disassemble): Replace // with /* ... */
1385 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1387 * sparc-opc.c: Add wr & rd for v9a asr's.
1388 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1389 (v9a_asr_reg_names): New variable.
1390 Patch from David Miller <davem@vger.rutgers.edu>.
1392 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1394 * sparc-opc.c (v9notv9a): New insn type.
1395 (IMPDEP): Move to the end to not conflict with edge8 et al.
1396 Patch from David Miller <davem@vger.rutgers.edu>.
1398 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1400 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1402 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1404 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1406 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1408 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1409 of disassemble_info structure to determine if an overlay address
1410 has a matching symbol in low memory.
1412 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1413 new symbol_at_address_func field in disassemble_info structure.
1415 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1417 * v850-opc.c (extract_d22): Use signed arithmatic.
1419 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1421 * mips-opc.c: Three op mult is not an ISA insn.
1423 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1425 * mips-opc.c: Fix formatting.
1427 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1429 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1430 than assuming that char is signed. Explicitly sign extend 16 bit
1431 values, rather than assuming that short is 16 bits.
1432 (OP_sI, OP_J, OP_DIR): Likewise.
1434 start-sanitize-v850e
1435 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1437 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1441 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1443 * v850-opc.c: Fix typo in comment.
1445 * v850-dis.c (disassemble): Add test of processor type when
1446 determining opcodes.
1448 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1450 * configure.in: Use a diversion to set enable_shared before the
1451 arguments are parsed.
1452 * configure: Rebuild.
1454 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1456 * m68k-opc.c (TBL1): Use ! rather than `.
1457 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1459 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1461 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1463 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1465 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1468 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1469 * aclocal.m4: Rebuild with new libtool.
1470 * configure: Rebuild.
1472 start-sanitize-v850e
1473 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1475 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1478 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1480 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1482 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1484 * v850-opc.c (v850_opcodes): Further rearrangements.
1487 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1489 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1492 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1494 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1497 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1499 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1501 * mips16-opc.c: Added mips16 sdbbp.
1504 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1506 * v850-opc.c: Initialise processors field of v850_opcode structure.
1509 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1511 Merge changes from Martin Hunt:
1513 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1515 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1516 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1517 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1519 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1521 * d30v-dis.c (print_insn): First operand of d*i (delayed
1522 branch) instructions is relative.
1524 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1525 (d30v_operand_table): Add IMM6S3 type.
1526 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1528 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1529 and cmp instructions.
1531 * d30v-opc.c: Correct entries for repeat*, and sat*.
1532 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1533 types. Correct several formats.
1535 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1537 * d30v-opc.c (pre_defined_registers): Change control registers.
1539 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1540 SHORT_C2. Manual was incorrect.
1542 * d30v-dis.c (lookup_opcode): Return value now indicates
1543 if an opcode has a short and a long form. Used for deciding
1544 to append a ".s" or ".l".
1545 (print_insn): Append a ".s" to an instruction if it is
1546 the short form and ".l" if it is a long form. Do not append
1547 anything if the instruction has only one possible size.
1549 * d30v-opc.c: Change mulx2h to require an even register.
1550 New form: SHORT_A2; a SHORT_A form that needs an even
1551 register as the first operand.
1553 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1554 instruction was not being disassembled if there were an odd
1555 number of instructions.
1557 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1560 start-sanitize-v850e
1561 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1563 * v850-dis.c (disassemble): Improved display of register lists.
1566 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1568 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1569 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1570 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1571 fandnot1s, fandnot2s.
1573 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1575 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1577 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1579 * cgen-asm.c (cgen_parse_address): New argument resultp.
1580 All callers updated.
1581 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1583 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1585 * mn10200-dis.c (disassemble): PC relative instructions are
1586 relative to the next instruction, not the current instruction.
1588 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1590 * v850-dis.c (disassemble): Only signed extend values that are not
1591 returned by extract functions.
1592 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1594 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1596 * v850-opc.c: Update comments. Remove use of
1597 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1599 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1601 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1603 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1605 * configure: Rebuilt with latest devo autoconf for NT support.
1607 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1609 * v850-dis.c (disassemble): Use curly brace syntax for register
1612 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1613 where r0 is being used as a destination register.
1615 start-sanitize-v850e
1616 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1618 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1621 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1623 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1624 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1625 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1626 Add insns to access SGR and DBR.
1627 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1629 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1631 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1633 start-sanitize-v850e
1634 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1636 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1637 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1640 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1642 * configure (cgen_files): Add support for v850e target.
1643 * configure.in (cgen_files): Add support for v850e target.
1645 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1647 * configure (cgen_files): Add support for v850ea target.
1648 * configure.in (cgen_files): Add support for v850ea target.
1651 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1653 * configure.in (bfd_arc_arch): Add.
1654 * configure: Rebuild.
1655 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1656 * Makefile.in: Rebuild.
1657 * arc-dis.c, arc-opc.c: New files.
1658 * disassemble.c (ARCH_all): Define ARCH_arc.
1659 (disassembler): Add ARC support.
1661 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1663 start-sanitize-v850e
1664 * v850-dis.c (disassemble): Add support for v850EA instructions.
1666 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1667 (v850_opcodes): Add v850EA instructions.
1669 * v850-dis.c (disassemble): Add support for v850E instructions.
1671 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1672 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1673 insert_spe, extract_spe): New Functions.
1674 (v850_opcodes): Add v850E instructions.
1677 * v850-opc.c: Reorganised and re-layed out to improve readability
1680 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1682 * configure: Rebuild with autoconf 2.12.1.
1684 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1686 * aclocal.m4, configure: Rebuild with new automake patches.
1688 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1690 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1691 * acinclude.m4: Just include acinclude.m4 from BFD.
1692 * aclocal.m4, configure: Rebuild.
1694 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1696 * Makefile.am: New file, based on old Makefile.in.
1697 * acconfig.h: New file.
1698 * acinclude.m4: New file.
1699 * stamp-h.in: New file.
1700 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1701 Removed shared library handling; now handled by libtool. Replace
1702 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1703 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1704 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1705 handling in AC_OUTPUT.
1706 * dep-in.sed: Change .o to .lo.
1707 * Makefile.in: Now built with automake.
1708 * aclocal.m4: Now built with aclocal.
1709 * config.in, configure: Rebuild.
1711 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1713 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1715 start-sanitize-r5900
1716 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1718 * mips-opc.c: Fix coding of mtsa.
1721 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1723 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1725 * sparc-dis.c (sorted_opcodes): New static local.
1726 (struct opcode_hash): `opcode' is pointer to const element.
1727 (build_hash): First arg is now table of sorted pointers.
1728 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1729 (compare_opcodes): Update.
1731 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1733 * cgen-opc.c: #include <ctype.h>.
1734 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1735 Handle case insensitive hashing.
1736 (hash_keyword_value): Change type of `value' to unsigned int.
1738 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1740 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1741 precision FP, mark it as such. Likewise for double precision
1742 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1744 start-sanitize-r5900
1745 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1748 start-sanitize-r5900
1749 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1751 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1752 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1755 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1757 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1759 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1760 nesting depth when all the macros are expanded.
1762 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1764 * sparc-opc.c: The fcmp v9a instructions take an integer register
1765 as a destination, not a floating point register. From Christian
1766 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1768 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1770 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1771 syntax. From Roman Hodek
1772 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1774 * i386-dis.c (twobyte_has_modrm): Fix pand.
1776 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1778 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1780 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1782 * arm-dis.c: Add prototypes for arm_decode_shift and
1785 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1787 * mips-opc.c: Add r3900 insns.
1789 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1791 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1792 print delay slot instructions on the same line. When using a PC
1793 relative load, add a comment with the value being loaded if it can
1796 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1798 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1799 to pushS/popS for segment regs and byte constant so that
1800 pushw/popw printed when in 16 bit data mode.
1802 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1803 print cbtw, cwtd in 16 bit data mode.
1804 * i386-dis.c (putop): extra case W to support above.
1806 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1807 address size prefix in 16 bit address mode.
1809 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1811 * sh-dis.c: Reindent. Rename local variable fprintf to
1814 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1816 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1818 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1820 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1822 * mips16-opc.c (mip16_opcodes): same.
1824 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1826 * m68k-opc.c (moveb): Change $d to %d.
1828 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1830 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1831 (twobyte_has_modrm): Likewise.
1833 (OP_MMX, OP_EM, OP_MS): New static functions.
1835 * i386-dis.c: Revert patch of April 4. The output now matches
1838 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1840 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1843 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1845 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1847 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1849 * Makefile.in (install): Depend upon installdirs.
1850 (installdirs): New target.
1852 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1854 From Thomas Graichen <graichen@rzpd.de>:
1855 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1856 * configure: Rebuild.
1858 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1860 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1861 Delete string{,s}.h support.
1863 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1865 * cgen-asm.c (cgen_parse_operand_fn): New global.
1866 (cgen_parse_{{,un}signed_integer,address}): Update call to
1867 cgen_parse_operand_fn.
1868 (cgen_init_parse_operand): New function.
1869 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1870 from cgen_asm_init_parse.
1871 (m32r_cgen_assemble_insn): New operand `errmsg'.
1872 Delete call to as_bad, return error message to caller.
1873 (m32r_cgen_asm_hash_keywords): #if 0 out.
1875 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1877 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1879 [case 'J']: Fix typo in register name.
1881 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1883 * configure.in: Substitute SHLIB_LIBS.
1884 * configure: Rebuild.
1885 * Makefile.in (SHLIB_LIBS): New variable.
1886 ($(SHLIB)): Use $(SHLIB_LIBS).
1888 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1890 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1892 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1894 * disassemble.c (disassembler): Handle m32r.
1896 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1898 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1899 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1900 * Makefile.in (CFILES): Add them.
1901 (ALL_MACHINES): Add them.
1902 (dependencies): Regenerate.
1903 * configure.in (cgen_files): New variable.
1904 (bfd_m32r_arch): Add entry.
1905 * configure: Regenerate.
1907 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1909 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1910 * configure: Rebuild.
1912 * Makefile.in: Rebuild dependencies.
1914 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1916 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1919 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1921 * Branched binutils 2.8.
1923 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1925 * m10200-dis.c: Rename from mn10200-dis.c.
1926 * m10200-opc.c: Rename from mn10200-opc.c.
1927 * m10300-dis.c: Rename from mn10300-dis.c
1928 * m10300-opc.c: Rename from mn10300-opc.c.
1929 * Makefile.in: Update accordingly.
1931 * mips16-opc.c: Add mul and dmul macros.
1933 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1935 * makefile.vms: Update CFLAGS, add clean target.
1937 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1939 * mips-opc.c: Add "wait". From Ralf Baechle
1940 <ralf@gnu.ai.mit.edu>.
1942 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1943 * configure, config.in: Rebuild.
1944 * sysdep.h: Include <stdlib.h> if it exists.
1945 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1947 * Makefile.in: Rebuild dependencies.
1949 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1951 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1952 Andrew Bray <andy@madhouse.demon.co.uk>.
1954 * mips-opc.c: Add cast when setting mips_opcodes.
1956 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1958 * v850-dis.c (disassemble): Fix sign extension problem.
1959 * v850-opc.c (extract_d*): Fix sign extension problems to make
1960 disassembly calculate branch offsets correctly.
1962 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1964 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1966 * mips-opc.c: Add dctr and dctw.
1969 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1971 * d30v-dis.c (print_insn): Change the way signed constants
1974 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1976 * Makefile.in (BFD_H): New variable.
1977 (HFILES): New variable.
1978 (CFILES): Add all C files.
1979 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1980 Delete old dependencies, and build new ones.
1981 * dep-in.sed: New file.
1983 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1985 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1987 start-sanitize-coldfire
1988 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1990 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1993 end-sanitize-coldfire
1994 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1996 * mn10200-opc.c: Change "trap" to "syscall".
1997 * mn10300-opc.c: Add new "syscall" instruction.
1999 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2001 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2002 mulul insns on the coldfire.
2004 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2006 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2007 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2008 (print_insn_little_arm): Likewise.
2010 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2012 Based on patches from H.J. Lu <hjl@lucon.org>:
2013 * i386-dis.c (fetch_data): Add prototype.
2014 * m68k-dis.c (fetch_data): Add prototype.
2015 (dummy_print_address): Add prototype. Make static.
2016 * ppc-opc.c (valid_bo): Add prototype.
2017 * sparc-dis.c (build_hash_table): Add prototype.
2018 (is_delayed_branch, compute_arch_mask): Add prototypes.
2019 (print_insn_sparc): Make several local variables const.
2020 (compare_opcodes): Change arguments to const PTR. Add prototype.
2021 * sparc-opc.c (arg): Change name field to be const.
2022 (lookup_name, lookup_value): Add prototypes. Change table and
2023 name parameters to be const.
2024 (sparc_encode_asi): Change name parameter to be const.
2025 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2026 (sparc_encode_sparclet_cpreg): Likewise.
2027 (sparc_decode_asi): Change return type to be const.
2028 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2029 (sparc_decode_sparclet_cpreg): Likewise.
2031 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2033 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2034 Solaris doesn't like the combined options, and the -f is
2036 (stamp-tshlink, install): Likewise.
2038 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2040 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2043 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2045 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2047 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2049 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2052 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2054 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2056 start-sanitize-tic80
2057 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2059 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2061 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2063 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2066 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2068 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2069 floatformat_to_double to make portable.
2070 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2073 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2075 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2076 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2078 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2080 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2081 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2083 start-sanitize-tic80
2084 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2086 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2087 (OFF_SL_BR_SCALED): ... to this, and added the flag
2088 TIC80_OPERAND_BASEREL to the flags word.
2089 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2093 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2095 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2096 Change mips_opcodes from const array to a pointer,
2097 and change bfd_mips_num_opcodes from const int to int,
2098 so that we can increase the size of the mips opcodes table
2101 start-sanitize-tic80
2102 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2104 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2105 store BITNUM values in the table in one's complement form
2106 to match behavior when assembler is given a raw numeric
2107 value for a BITNUM operand.
2108 * tic80-dis.c (print_operand_bitnum): Ditto.
2112 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2114 * d30v-opc.c: Removed references to FLAG_X.
2117 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2119 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2122 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2124 * Makefile.in: Added d30v object files.
2125 * configure: (bfd_d30v_arch) Rebuilt.
2126 * configure.in: (bfd_d30v_arch) Added new case.
2127 * d30v-dis.c: New file.
2128 * d30v-opc.c: New file.
2129 * disassemble.c (disassembler) Add entry for d30v.
2132 start-sanitize-tic80
2133 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2135 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2136 representations for the floating point BITNUM values.
2138 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2140 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2141 in the table in one's complement form, as they appear in the
2143 (tic80_symbol_to_value): Use macros to access predefined
2145 (tic80_value_to_symbol): Ditto.
2146 (tic80_next_predefined_symbol): New function.
2147 * tic80-dis.c (print_operand_bitnum): Remove code that did
2148 one's complement for BITNUM values.
2151 start-sanitize-r5900
2152 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2154 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2157 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2159 * makefile.vms: Remove 8 bit characters. Update to latest
2162 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2164 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2166 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2168 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2169 (IMM24_PCREL): Likewise.
2171 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2173 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2174 address for an extended PC relative instruction that is not a
2177 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2179 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2182 start-sanitize-tic80
2183 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2185 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2186 (tic80_opcodes): Sort entries so that long immediate forms
2187 come after short immediate forms, making it easier for
2188 assembler to select the right one for a given operand.
2191 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2193 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2195 (print_insn_mips16): Likewise.
2197 start-sanitize-r5900
2198 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2200 * mips-opc.c: add r5900.
2203 start-sanitize-tic80
2204 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2206 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2207 a symbol class that restricts translation to just that
2208 class (general register, condition code, etc).
2210 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2212 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2213 and REG_DEST_E for register operands that have to be
2214 an even numbered register. Add REG_FPA for operands that
2215 are one of the floating point accumulator registers.
2216 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2217 (tic80_opcodes): Change entries that need even numbered
2218 register operands to use the new operand table entries.
2219 Add "or" entries that are identical to "or.tt" entries.
2222 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2224 * mips16-opc.c: Add new cases of exit instruction for
2226 * mips-dis.c (print_mips16_insn_arg): Display floating point
2227 registers in operands of exit instruction. Print `$' before
2228 register names in operands of entry and exit instructions.
2230 start-sanitize-tic80
2231 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2233 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2234 pairs for all predefined symbols recognized by the assembler.
2235 Also used by the disassembling routines.
2236 (tic80_symbol_to_value): New function.
2237 (tic80_value_to_symbol): New function.
2238 * tic80-dis.c (print_operand_control_register,
2239 print_operand_condition_code, print_operand_bitnum):
2240 Remove private tables and use tic80_value_to_symbol function.
2243 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2245 * d10v-dis.c (print_operand): Change address printing
2246 to correctly handle PC wrapping. Fixes PR11490.
2248 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2250 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2253 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * mips-dis.c (print_insn_mips16): Set insn_info information.
2256 (print_mips16_insn_arg): Likewise.
2258 * mips-dis.c (print_insn_mips16): Better handling of an extend
2259 opcode followed by an instruction which can not be extended.
2261 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2263 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2264 coldfire moveb instruction to not allow an address register as
2265 destination. Although the documentation does not indicate that
2266 this is invalid, experiments uncovered unexpected behavior.
2267 Added a comment explaining the situation. Thanks to Andreas
2268 Schwab for pointing this out to me.
2270 start-sanitize-tic80
2271 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2273 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2274 entries are presorted so that entries with the same mnemonic are
2275 adjacent to each other in the table. Sort the entries for each
2276 instruction so that this is true.
2279 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2281 * m68k-dis.c: Include <libiberty.h>.
2282 (print_insn_m68k): Sort the opcode table on the most significant
2283 nibble of the opcode.
2285 start-sanitize-tic80
2286 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2288 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2289 "vsub", "vst", "xnor", and "xor" instructions.
2290 (V_a1): Renamed from V_a, msb of accumulator reg number.
2291 (V_a0): Add macro, lsb of accumulator reg number.
2293 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2295 * tic80-dis.c (print_insn_tic80): Broke excessively long
2296 function up into several smaller ones and arranged for
2297 the instruction printing function to be callable recursively
2298 to print vector instructions that have both a load and a
2299 math instruction packed into a single opcode.
2300 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2301 to explain why it comes after the other vector opcodes.
2304 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2306 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2307 move insns to handle immediate operands.
2309 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2311 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2312 fix operand mask in the "moveml" entries for the coldfire.
2314 start-sanitize-tic80
2315 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2317 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2318 New macros for building vector instruction opcodes.
2319 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2320 FMT_LI, which were unused. The field is now a flags field.
2321 Remove some opcodes that are possible, but illegal, such
2322 as long immediate instructions with doubles for immediate
2323 values. Add "vadd" and "vld" instructions.
2325 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2327 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2328 the order more logical. Move the shift alias instructions ("rotl",
2329 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2330 interspersed with the regular sr.x and sl.x instructions. Add
2331 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2332 "sub", "subu", "swcr", and "trap".
2334 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2336 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2337 (OFF_SL_PC): Renamed from OFF_SL.
2338 (OFF_SS_BR): New operand type for base relative operand.
2339 (OFF_SL_BR): New operand type for base relative operand.
2340 (REG_BASE): New operand type for base register operand.
2341 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2342 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2343 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2345 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2346 10 char field, padded with spaces on rhs, rather than a string
2347 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2348 than old TIC80_OPERAND_RELATIVE. Add support for new
2349 TIC80_OPERAND_BASEREL flag bit.
2351 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2353 * tic80-dis.c (print_insn_tic80): Print floating point operands
2355 * tic80-opc.c (SPFI): Add single precision floating point
2356 immediate operand type.
2357 (ROTATE): Add rotate operand type for shifts.
2358 (ENDMASK): Add for shifts.
2359 (n): Macro for the 'n' bit.
2360 (i): Macro for the 'i' bit.
2361 (PD): Macro for the 'PD' field.
2362 (P2): Macro for the 'P2' field.
2363 (P1): Macro for the 'P1' field.
2364 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2368 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2370 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2371 adding in current address for pc-relative operands.
2373 start-sanitize-tic80
2374 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2376 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2377 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2378 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2379 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2380 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2381 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2382 (REG_SCALED, LSI_SCALED): New operand types.
2383 (E): New macro for 'E' bit at bit 27.
2384 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2385 opcodes, including the various size flavors (b,h,w,d) for
2386 the direct load and store instructions.
2388 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2390 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2392 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2393 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2394 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2395 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2396 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2397 masks with "MASK_* & ~M_*" to get the M bit reset.
2398 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2400 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2402 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2403 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2404 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2406 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2407 CC, SICR, and LICR table entries.
2408 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2409 "bcnd", and "brcr" opcodes.
2412 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2414 * ppc-opc.c (powerpc_operands): Make comment match the
2415 actual fields (no shift field).
2416 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2417 start-sanitize-tic80
2418 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2419 partial implementation, work in progress.
2420 * tic80-opc.c (tic80_operands): Begin construction operands table.
2421 (tic80_opcodes): Continue populating opcodes table and start
2422 filling in the operand indices.
2423 (tic80_num_opcodes): Add this.
2426 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2428 * m68k-opc.c: Add #B case for moveq.
2430 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2432 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2433 before they are used.
2435 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2437 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2438 for "breakpoint" instruction.
2440 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2442 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2443 (dep): Use ALL_CFLAGS rather than CFLAGS.
2445 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2447 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2450 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2452 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2453 start-sanitize-tic80
2454 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2457 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2459 * mips16-opc.c: Add "abs".
2461 start-sanitize-tic80
2462 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2464 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2465 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2466 (disassembler): Add bfd_arch_tic80 support to set disassemble
2467 to print_insn_tic80.
2468 * tic80-dis.c (print_insn_tic80): Add stub.
2470 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2472 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2473 * configure: Regenerate with autoconf.
2474 * tic80-dis.c: Add file.
2475 * tic80-opc.c: Add file.
2478 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2480 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2482 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2484 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2485 (mn10200_opcodes): Use it for some logicals and btst insns.
2486 Add "break" and "trap" instructions.
2488 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2490 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2492 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2494 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2495 relative load or add now depends upon whether the instruction is
2498 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2500 * mn10200-dis.c: Finish writing disassembler.
2501 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2502 Fix mask for "jmp (an)".
2504 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2505 handle endianness issues for mn10300.
2507 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2509 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2511 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2512 instruction. Fix opcode field for "movb (imm24),dn".
2514 * mn10200-opc.c (mn10200_operands): Fix insertion position
2517 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2519 * mn10200-opc.c: Create mn10200 opcode table.
2520 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2521 but moving along nicely.
2523 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2525 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2527 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2529 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2530 specifiers for fmovem* instructions.
2532 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2534 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2536 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2538 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2541 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2543 * mn10300-opc.c: Add some comments explaining the various
2546 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2548 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2550 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2553 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2554 operand specifiers in fmovm* instructions.
2556 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2558 * ppc-opc.c (insert_li): Give an error if the offset has the two
2559 least significant bits set.
2561 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2563 * mips-dis.c (print_insn_mips16): Separate the instruction from
2564 the arguments with a tab, not a space.
2566 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2568 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2571 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2574 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2576 * configure: Rebuild with autoconf 2.12.
2578 Add support for mips16 (16 bit MIPS implementation):
2579 * mips16-opc.c: New file.
2580 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2581 (mips16_reg_names): New static array.
2582 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2583 after seeing a 16 bit symbol.
2584 (print_insn_little_mips): Likewise.
2585 (print_insn_mips16): New static function.
2586 (print_mips16_insn_arg): New static function.
2587 * mips-opc.c: Add jalx instruction.
2588 * Makefile.in (mips16-opc.o): New target.
2589 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2590 * configure: Rebuild.
2592 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2594 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2595 operand specifiers in *save, *restore and movem* instructions.
2597 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2600 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2601 register operands for immediate arithmetic, not, neg, negx, and
2602 set according to condition instructions.
2604 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2605 specifier of the effective-address operand in immediate forms of
2606 arithmetic instructions. The specifier for the immediate operand
2607 notes how and where the constant will be stored.
2609 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2611 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2614 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2617 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2619 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2621 * mn10300-dis.c (disassemble): Handle register lists.
2623 * mn10300-opc.c: Fix handling of register list operand for
2624 "call", "ret", and "rets" instructions.
2626 * mn10300-dis.c (disassemble): Print PC-relative and memory
2627 addresses symbolically if possible.
2628 * mn10300-opc.c: Distinguish between absolute memory addresses,
2629 pc-relative offsets & random immediates.
2631 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2633 (disassemble): Handle SPLIT and EXTENDED operands.
2635 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2637 * mn10300-dis.c: Rough cut at printing some operands.
2639 * mn10300-dis.c: Start working on disassembler support.
2640 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2642 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2644 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2646 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2648 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2650 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2652 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2653 register argument is calls and jmp instructions.
2655 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2657 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2658 getx operand. Fix opcode for mulqu imm,dn.
2660 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2662 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2663 in MN10300_OPERAND_SPLIT operands for how many bits
2664 appear in the basic insn word. Add IMM32_HIGH24,
2665 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2666 (mn10300_opcodes): Use new operands as needed.
2668 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2669 for bset, bclr, btst instructions.
2670 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2672 * mn10300-opc.c (mn10300_operands): Remove many redundant
2673 operands. Update opcode table as appropriate.
2674 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2675 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2677 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2679 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2680 operands (for indexed load/stores). Fix bitpos for DI
2681 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2682 few instructions that insert immediates/displacements in the
2683 middle of the instruction. Add IMM8E for 8 bit immediate in
2684 the extended part of an instruction.
2685 (mn10300_operands): Use new opcodes as appropriate.
2687 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2689 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2690 sequential so the assembler never parallelizes it with
2693 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2695 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2696 a data/address register that appears in register field 0
2697 and register field 1.
2698 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2700 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2702 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2703 standard disassembly.
2705 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2706 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2707 Recategorize PALcode instructions.
2709 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2711 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2713 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2715 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2716 there are no operand types.
2718 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2720 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2722 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2724 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2726 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2728 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2730 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2731 and sst.w instructions.
2733 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2736 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2738 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2741 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2743 * ppc-opc.c (PPCPWR2): Define.
2744 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2747 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2749 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2750 field for movhu instruction.
2752 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2753 cast value to "long" not "signed long" to keep hpux10
2756 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2758 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2761 * mn10300-opc.c (FMT*): Remove definitions.
2763 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2764 for shift-by-register opcodes.
2766 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2767 into [AD][MN][01] for encoding the position of the register
2770 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2772 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2773 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2775 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2777 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2778 Fix various typos. Add "PAREN" operand.
2779 (MEM, MEM2): Define.
2780 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2781 operands. Fix several typos.
2783 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2786 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2788 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2789 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2791 (mn10300_opcodes): Break opcode format out into its own field.
2792 Update many operand fields to deal with signed vs unsigned
2793 issues. Fix one or two typos in the "mov" instruction
2794 opcode, mask and/or operand fields.
2796 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2798 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2799 m68851 wasn't reset.
2801 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2803 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2804 all opcodes. Very rough cut at operands for all opcodes.
2806 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2809 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2811 * mn10200-opc.c, mn10300-opc.c: New files.
2812 * mn10200-dis.c, mn10300-dis.c: New files.
2813 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2814 * disassemble.c: Break mn10x00 support into 10200 and 10300
2816 * configure.in: Likewise.
2817 * configure: Rebuilt.
2819 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2821 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2823 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2825 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2827 * disassemble (ARCH_mn10x00): Define.
2828 (disassembler): Handle bfd_arch_mn10x00.
2829 * configure.in: Recognize bfd_mn10x00_arch.
2830 * configure: Rebuilt.
2832 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2834 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2835 accordingly. Don't declare functions using op_rtn.
2837 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2839 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2840 params to be more standard.
2841 * (disassemble): Print absolute addresses and symbolic names for
2842 branch and jump targets.
2843 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2845 * (v850_opcodes): Add breakpoint insn.
2847 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2849 * m68k-opc.c: Move the fmovemx data register cases before the
2850 other cases, so that they get recognized before the data register
2851 does gets treated as a degenerate register list.
2853 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2855 * mips-opc.c: Add a case for "div" and "divu" with two registers
2856 and a destination of $0.
2858 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2860 * mips-dis.c (print_insn_arg): Add prototype.
2861 (_print_insn_mips): Ditto.
2863 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2865 * mips-dis.c (print_insn_arg): Print condition code registers as
2868 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2870 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2872 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2874 * v850-dis.c (disassemble): Make static. Provide prototype.
2876 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2878 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2881 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2883 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2884 ']' characters into the output stream.
2885 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2886 Add "memop" field to all opcodes (for the disassembler).
2887 Reorder opcodes so that "nop" comes before "mov" and "jr"
2888 comes before "jarl".
2890 * v850-dis.c (print_insn_v850): Fix typo in last change.
2892 * v850-dis.c (print_insn_v850): Properly handle disassembling
2893 a two byte insn at the end of a memory region when the memory
2894 region's size is only two byte aligned.
2896 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2898 * v850-dis.c (v850_reg_names): Define.
2899 (v850_sreg_names, v850_cc_names): Likewise.
2900 (disassemble): Very rough cut at printing operands (unformatted).
2902 * v850-opc.c (BOP_MASK): Fix.
2903 (v850_opcodes): Fix mask for jarl and jr.
2905 * v850-dis.c: New file. Skeleton for disassembler support.
2906 * Makefile.in Remove v850 references, they're not needed here.
2907 * configure.in: Add v850-dis.o when building v850 toolchains.
2908 * configure: Rebuilt.
2909 * disassemble.c (disassembler): Call v850 disassembler.
2911 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2912 (insert_d8_6, extract_d8_6): New functions.
2913 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2914 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2916 (IF4A, IF4B): Use "D7" instead of "D7S".
2917 (IF4C, IF4D): Use "D8_7" instead of "D8".
2918 (IF4E, IF4F): New. Use "D8_6".
2919 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2920 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2922 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2923 (v850_operands): Change D16 to D16_15, use special insert/extract
2924 routines. New new D16 that uses the generic insert/extract code.
2925 (IF7A, IF7B): Use D16_15.
2926 (IF7C, IF7D): New. Use D16.
2927 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2929 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2930 message. Issue an error if the branch offset is odd.
2932 * v850-opc.c: Add notes about needing special insert/extract
2933 for all the load/store insns, except "ld.b" and "st.b".
2935 * v850-opc.c (insert_d22, extract_d22): New functions.
2936 (v850_operands): Use insert_d22 and extract_d22 for
2938 (insert_d9): Fix range check.
2940 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2942 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2943 and set bits field to D9 and D22 operands.
2945 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2947 * v850-opc.c (v850_operands): Define SR2 operand.
2948 (v850_opcodes): "ldsr" uses R1,SR2.
2950 * v850-opc.c (v850_opcodes): Fix opcode specs for
2951 sld.w, sst.b, sst.h, sst.w, and nop.
2953 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2955 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2956 end of the opcode table.
2958 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2960 * d10v-opc.c (pre_defined_registers): Added register pairs,
2961 "r0-r1", "r2-r3", etc.
2963 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2965 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2966 Create I16U for an unsigned 16bit mmediate operand.
2967 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2969 * v850-opc.c (v850_operands): Define EP operand.
2970 (IF4A, IF4B, IF4C, IF4D): Use EP.
2972 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2973 with immediate operand, "movhi". Tweak "ldsr".
2975 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2976 correct. Get sld.[bhw] and sst.[bhw] closer.
2978 * v850-opc.c (v850_operands): "not" is a two byte insn
2980 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2982 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2984 * v850-opc.c (two): Get order of words correct.
2986 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2988 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2989 register source and destination operands.
2990 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2992 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2993 same thinko in "trap" opcode.
2995 * v850-opc.c (v850_opcodes): Add initializer for size field
2998 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2999 Add D8 for 8-bit unsigned field in short load/store insns.
3000 (IF4A, IF4D): These both need two registers.
3001 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3002 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3003 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3004 for "ldsr" and "stsr".
3005 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3008 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3009 short store word (sst.w).
3011 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3013 * v850-opc.c (v850_operands): Added insert and extract fields,
3014 pointers to functions that handle unusual operand encodings.
3016 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3018 * v850-opc.c (v850_opcodes): Enable "trap".
3020 * v850-opc.c (v850_opcodes): Fix order of displacement
3021 and register for "set1", "clr1", "not1", and "tst1".
3023 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3025 * v850-opc.c (v850_operands): Add "B3" support.
3026 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3029 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3031 * v850-opc.c: Close unterminated comment.
3033 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3035 * v850-opc.c (v850_operands): Add flags field.
3036 (v850_opcodes): add move opcodes.
3038 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3040 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3041 * configure: (bfd_v850v_arch) Add new case.
3042 * configure.in: (bfd_v850_arch) Add new case.
3043 * v850-opc.c: New file.
3045 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3047 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3049 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3051 * d10v-opc.c: Add additional information to the opcode
3052 table to help determinine which instructions can be done
3055 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3057 * mpw-make.sed: Update editing of include pathnames to be
3060 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3062 * arm-opc.h: Added "bx" instruction definition.
3064 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3066 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3068 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3070 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3072 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3074 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3076 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3078 * makefile.vms: Update for alpha-opc changes.
3080 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3082 * i386-dis.c (print_insn_i386): Actually return the correct value.
3083 (ONE, OP_ONE): #ifdef out; not used.
3085 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3087 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3088 Changed subi operand type to treat 0 as 16.
3090 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3092 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3095 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3097 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3098 memory transfer instructions. Add new format string entries %h and %s.
3099 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3102 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3104 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3105 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3107 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3109 * alpha-dis.c (print_insn_alpha_osf): Remove.
3110 (print_insn_alpha_vms): Remove.
3111 (print_insn_alpha): Make globally visible. Chose the register
3112 names based on info->flavour.
3113 * disassemble.c: Always return print_insn_alpha for the alpha.
3115 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3117 * d10v-dis.c (dis_long): Handle unknown opcodes.
3119 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3121 * d10v-opc.c: Changes to support signed and unsigned numbers.
3122 All instructions with the same name that have long and short forms
3123 now end in ".l" or ".s". Divs added.
3124 * d10v-dis.c: Changes to support signed and unsigned numbers.
3126 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3128 * d10v-dis.c: Change all functions to use info->print_address_func.
3130 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3132 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3133 move ccr/sr insns more strict so that the disassembler only
3134 selects them when the addressing mode is data register.
3136 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3137 * d10v-opc.c (pre_defined_registers): Declare.
3138 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3139 to pick a better name for the registers.
3141 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3143 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3144 operands for fexpand and fpmerge. From Christian Kuehnke
3145 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3147 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3149 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3150 print routine. Take new regnames and cpumask arguments.
3151 Kill the environment variable nonsense.
3152 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3153 (print_insn_alpha_vms): New function. Do VMS style regnames.
3154 * disassemble.c (disassembler): Test bfd flavour to pick
3155 between OSF and VMS routines. Default to OSF.
3157 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3159 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3160 * configure: Rebuild.
3161 * Makefile.in (install): Use @INSTALL_SHLIB@.
3163 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3165 * configure: (bfd_d10v_arch) Add new case.
3166 * configure.in: (bfd_d10v_arch) Add new case.
3167 * d10v-dis.c: New file.
3168 * d10v-opc.c: New file.
3169 * disassemble.c (disassembler) Add entry for d10v.
3171 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3173 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3174 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3176 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3178 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3179 distinguish between variants of the instruction set.
3180 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3181 distinguish between variants of the instruction set.
3183 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3185 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3186 the 8086 instruction set.
3187 * i386-dis.c: General cleanups. Make most things static. Add
3188 prototypes. Get rid of static variables aflags and dflags. Pass
3189 them as args (to almost everything).
3191 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3193 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3195 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3197 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3198 if the next arg is marked with SRC_IN_DST. Gross.
3200 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3201 we're looking for and find EXR.
3203 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3204 if we're looking for KBIT and we don't find it.
3206 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3209 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3210 3bit immediate operands.
3212 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3214 * Released binutils 2.7.
3216 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3217 <kkaempf@progis.ac-net.de>.
3219 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3221 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3223 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3225 * sparc-dis.c (print_insn_sparclite): New routine to print
3226 sparclite instructions.
3228 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3230 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3232 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3234 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3235 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3236 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3238 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3240 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3241 Use autoconf-set values.
3242 (docdir, oldincludedir): Removed.
3243 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3245 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3247 * alpha-opc.c: New file.
3248 * alpha-opc.h: Remove.
3249 * alpha-dis.c: Complete rewrite to use new opcode table.
3250 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3251 * configure: Rebuild with autoconf 2.10.
3252 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3253 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3255 (alpha-opc.o): New target.
3257 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3259 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3260 Set imm_added_to_rs1 even if the source and destination register
3263 * sparc-opc.c: Add some two operand forms of the wr instruction.
3265 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3267 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3270 * disassemble.c (disassembler): Handle H8/S.
3271 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3273 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3275 * sparc-opc.c: Add beq/teq as aliases for be/te.
3277 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3278 <sergei@msil.sps.mot.com>.
3280 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3282 * makefile.vms: New file.
3284 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3286 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3288 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3291 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3293 * i386-dis.c (OP_OFF): Call append_prefix.
3295 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3297 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3298 unsigned long to silence a warning from the Solaris PowerPC
3301 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3303 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3305 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3307 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3309 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3310 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3311 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3312 cpush, cpusha, cpull sparclet insns.
3314 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3316 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3318 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3320 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3321 Set F_FLOAT on other floating point instructions.
3323 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3325 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3327 (powerpc_opcodes): Add 860/821 specific SPRs.
3329 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3331 * configure.in: Permit --enable-shared to specify a list of
3332 directories. Set and substitute BFD_PICLIST.
3333 * configure: Rebuild.
3334 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3335 uses. Set to @BFD_PICLIST@.
3337 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3339 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3340 not "abs", which may be needed for the absolute in something
3341 like btst #0,@10:8. Print L_3 immediates separately from other
3342 immediates. Change ABSMOV reference to ABS8MEM.
3344 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3346 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3347 (current_arch_mask): New static global.
3348 (compute_arch_mask): New static function.
3349 (print_insn_sparc): Delete sparc_v9_p. New static local
3350 current_mach. Resort opcode table if current_mach changes.
3351 Generalize "insn not supported" test.
3352 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3353 Delete test for v9/!v9.
3354 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3356 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3357 (brfcx): Renamed to FBRX.
3358 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3359 coprocessor mnemonics are not supported on the sparclet).
3360 (condf): Renamed to CONDF.
3361 (SLCBCC2): Delete F_ALIAS flag.
3363 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3365 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3366 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3368 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3370 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3371 that the shared library version number is set correctly.
3373 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3375 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3376 Miles Bader <miles@gnu.ai.mit.edu>.
3377 * configure: Rebuild.
3379 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3381 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3384 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3386 * configure: Rebuild with autoconf 2.8.
3388 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3390 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3391 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3393 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3395 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3396 since they appear as targets in Makefile.in.
3397 * configure: Rebuild.
3399 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3401 * mpw-make.sed: Edit out shared library support bits.
3403 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3405 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3406 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3407 (sparc_opcodes): Add sparclet insns.
3408 (sparclet_cpreg_table): New static local.
3409 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3410 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3412 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3414 * i386-dis.c (index16): New static variable.
3415 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3417 (OP_indirE): Return result of OP_E.
3418 (OP_E): Check for 16 bit addressing mode, and disassemble
3419 correctly. Optimised 32 bit case a little. Don't print
3420 "(base,index,scale)" when sib specifies only an offset.
3422 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3424 * configure.in: Set and substitute SHLIB_DEP.
3425 * configure: Rebuild.
3426 * Makefile.in (SHLIB_DEP): New variable.
3427 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3428 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3429 COMMON_SHLIB, add them to piclist with appropriate modifications.
3430 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3431 here: just use piclist.
3433 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3435 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3436 (print_insn_sparc): Rewrite v9/not-v9 tests.
3437 (compare_opcodes): Likewise.
3438 * sparc-opc.c (MASK_<ARCH>): Define.
3439 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3440 (sparclet,v6notv9): Define.
3441 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3442 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3444 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3446 * configure.in: Call AC_PROG_CC before configure.host.
3447 * configure: Rebuild.
3449 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3451 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3453 * i386-dis.c (onebyte_has_modrm): New static array.
3454 (twobyte_has_modrm): New static array.
3455 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3457 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3459 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3462 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3464 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3467 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3469 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3470 m68010up, not just m68020up | cpu32.
3472 * Makefile.in (SONAME): New variable.
3473 ($(SHLINK)): Make a link to the transformed name, as well.
3474 (stamp-tshlink): New target.
3475 (install): Skip stamp-tshlink during install.
3477 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3479 * configure.in: Call AC_ARG_PROGRAM.
3480 * configure: Rebuild.
3481 * Makefile.in (program_transform_name): New variable.
3482 (install): Transform library name before installing it.
3484 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3486 * i960-dis.c (mem): Add HX dcinva instruction.
3488 Support for building as a shared library, based on patches from
3489 Alan Modra <alan@spri.levels.unisa.edu.au>:
3490 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3491 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3492 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3493 * configure: Rebuild.
3494 * Makefile.in (ALLLIBS): New variable.
3495 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3496 (COMMON_SHLIB, SHLINK): New variables.
3497 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3498 (STAGESTUFF): Remove variable.
3499 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3500 (stamp-piclist, piclist): New targets.
3501 ($(SHLIB), $(SHLINK)): New targets.
3502 ($(OFILES)): Depend upon stamp-picdir.
3503 (disassemble.o): Build twice if PICFLAG is set.
3504 (MOSTLYCLEAN): Add pic/*.o.
3505 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3506 (distclean): Remove pic and stamp-picdir.
3507 (install): Install shared libraries.
3508 (stamp-picdir): New target.
3510 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3512 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3513 Print unknown instruction as "unknown", rather than in hex.
3515 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3517 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3519 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3521 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3523 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3525 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3526 when necessary. From Ulrich Drepper
3527 <drepper@myware.rz.uni-karlsruhe.de>.
3529 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3531 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3532 sparc_num_opcodes. Update architecture enum values.
3533 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3534 (sparc_opcode_lookup_arch): New function.
3535 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3536 (sparc_opcodes): Add v9a shutdown insn.
3538 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3540 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3541 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3543 (print_insn_sparc64): Deleted.
3544 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3547 * sparc-opc.c (architecture_pname): Add v9a.
3549 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3551 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3552 incorrectly defined as 0x16 when it should be 0x15.
3553 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3554 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3555 excb (exception barrier) which is defined in the Alpha
3556 Architecture Handbook version 2.
3557 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3558 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3559 disassembled as or, for example.
3561 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3563 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3564 (_print_insn_mips): Change i from int to unsigned int.
3566 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3568 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3569 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3571 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3573 * i386-dis.c: Added Pentium Pro instructions.
3575 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3577 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3580 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3582 * sh-opc.h (sh_nibble_type): Added REG_B.
3583 (sh_arg_type): Added A_REG_B.
3584 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3586 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3588 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3590 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3592 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3594 * Makefile.in (distclean): Remove stamp-h. From Ronald
3595 F. Guilmette <rfg@monkeys.com>.
3597 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3599 From David Mosberger-Tang <davidm@azstarnet.com>:
3600 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3603 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3605 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3606 (sh_table): Added many SH3 opcodes.
3607 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3609 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3611 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3612 (subco,subco.): Mark this PPC, not PPCCOM.
3614 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3616 * configure: Rebuild with autoconf 2.7.
3618 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3620 * configure: Rebuild with autoconf 2.6.
3622 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3624 * configure.in: Sort list of architectures. Accept but do nothing
3625 for alliant, convex, pyramid, romp, and tahoe.
3627 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3629 * a29k-dis.c (print_special): Change num to unsigned int.
3631 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3633 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3636 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3638 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3639 * configure: Rebuilt.
3641 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3643 * configure.in: Add case for bfd_i860_arch.
3644 * configure: Rebuild.
3646 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3648 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3649 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3650 (NEXTDOUBLE): Likewise.
3651 (print_insn_m68k): Don't match fmoveml if there is more than one
3652 register in the list.
3653 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3655 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3657 * m68k-opc.c: Use #W rather than #w.
3658 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3660 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3662 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3663 and likewise for all the dbxx opcodes.
3665 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3667 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3669 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3671 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3672 the VR4100 specific instructions to the mips_opcodes structure.
3674 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3676 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3677 ugly Metrowerks bug in CW6, is fixed in CW7.
3679 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3681 * ppc-opc.c (whole file): Add flags for common/any support.
3683 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3685 * Makefile.in (BISON): Remove macro.
3686 (FLAGS_TO_PASS): Remove BISON.
3688 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3690 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3692 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3693 instructions that take no args by looking at the match mask.
3694 (print_insn_arg): Always print "%" before register names.
3695 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3696 [case '_']: Don't print "@#" before address.
3697 [case 'J']: Use "%s" as format string, not register name.
3698 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3700 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3702 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3705 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3707 From David Mosberger-Tang <davidm@azstarnet.com>
3709 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3710 (alpha_insn_set): added definitions for VAX floating point
3711 instructions (Unix compilers don't generate these, but handcoded
3712 assembly might still use them).
3714 * alpha-dis.c (print_insn_alpha): added support for disassembling
3715 the miscellaneous instructions in the Alpha instruction set.
3717 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3719 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3720 no longer create sysdep.h, sed ppc-opc.c to work around a
3721 serious Metrowerks C bug.
3722 * mpw-make.in: Remove.
3723 * mpw-make.sed: New file, used by mpw-configure to edit
3724 Makefile.in into an MPW makefile.
3726 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3728 * Makefile.in (maintainer-clean): New synonym for realclean.
3730 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3732 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3733 which use '0', '1', and '2' instead. Specify the proper size for
3734 a pmove immediate operand. Correct the pmovefd patterns to be
3735 moves to a register, not from a register.
3736 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3738 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3740 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3741 %psr, %wim, %tbr as F_NOTV9.
3743 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3745 * Makefile.in (Makefile): Just rebuild Makefile when running
3747 (config.h, stamp-h): New targets.
3748 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3749 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3750 rebuilding config.h.
3751 * configure: Rebuild.
3753 * mips-opc.c: Change unaligned loads and stores with "t,A"
3754 operands to use "t,A(b)".
3756 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3758 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3760 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3762 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3763 until 3 instead of until 2.
3765 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3767 * Makefile.in (ALL_CFLAGS): Define.
3768 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3769 (MOSTLYCLEAN): Add config.log.
3770 (distclean): Don't remove config.log.
3771 * configure.in: Substitute HDEFINES.
3772 * configure: Rebuild.
3774 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3776 * sh-opc.h (sh_arg_type): Add F_FR0.
3777 (sh_table, case fmac): Add F_FR0 as first argument.
3779 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3781 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3783 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3785 * sparc-dis.c: Remove all references to NO_V9.
3787 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3789 * aclocal.m4: Just include ../bfd/aclocal.m4.
3790 * configure: Rebuild.
3792 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3794 * sparc-dis.c (X_DISP19): Define.
3795 (print_insn, case 'G'): Use it.
3796 (print_insn, case 'L'): Sign extend displacement.
3798 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3800 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3801 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3802 host_makefile_frag or frags.
3803 * aclocal.m4: New file.
3804 * configure: Rebuild.
3805 * Makefile.in (INSTALL): Set to @INSTALL@.
3806 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3807 (INSTALL_DATA): Set to @INSTALL_DATA@.
3809 (AR_FLAGS): Set to rc rather than qc.
3810 (CC): Define as @CC@.
3811 (CFLAGS): Set to @CFLAGS@.
3812 (@host_makefile_frag@): Remove.
3813 (config.status): Remove dependency upon @frags@.
3815 * configure.in: ../bfd/config.bfd now just sets shell variables.
3816 Use them rather than looking through target Makefile fragments.
3817 * configure: Rebuild.
3819 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3821 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3823 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3825 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3826 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3829 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3830 (lookup_{name,value}): New functions.
3831 (prefetch_table): New static local.
3832 (sparc_{encode,decode}_prefetch): New functions.
3833 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3835 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3837 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3840 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3842 * sh-dis.c: Correct comment on first line of file.
3844 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3846 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3848 * sparc-opc.c (asi, membar): New static locals.
3849 (sparc_{encode,decode}_{asi,membar}): New functions.
3850 (sparc_opcodes, membar insn): Fix.
3851 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3852 Support decoding of membar masks.
3855 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3857 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3859 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3861 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3862 and likewise for the other branches. Add bhs as an alias for bcc,
3863 and likewise for the size variants. Add dbhs as an alias for
3866 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3868 * sh-opc.h (FP sts instructions): Update to match reality.
3870 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3872 * m68k-dis.c: (fpcr_names): Add % before all register names.
3873 (reg_names): Likewise.
3874 (print_insn_arg): Don't explicitly print % before register names.
3875 Add % before register names in static array names. In case 'r',
3876 print data registers as `@(Dn)', not `Dn@'. When printing a
3877 memory address, don't print @# before it.
3878 (print_indexed): Change base_disp and outer_disp from int to
3879 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3880 syntax. Sign extend 8 byte displacement correctly.
3881 (print_base): Print using MIT syntax. Print zpc when appropriate.
3882 Change parameter disp from int to bfd_vma.
3884 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3887 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3889 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3890 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3891 * sh-opc.h (sh_arg_type): Add new operand types.
3892 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3894 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3896 * Makefile.in (distclean): Remove generated file config.h.
3898 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3900 * Makefile.in (distclean): Remove generated file config.h.
3902 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3904 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3906 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3908 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3909 rather than numopcodes. Use m68k_opcodes rather than removed
3910 opcode function. Don't check F_ALIAS.
3911 (print_insn_arg): Change first parameter to be const char *.
3912 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3913 (m68k-opc.o): New target.
3914 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3915 * configure: Rebuild.
3917 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3919 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3920 (opcode_bits, opcode_hash_table): New variables.
3921 (opcodes_initialized): Renamed from opcodes_sorted.
3922 (build_hash_table): New function.
3923 (is_delayed_branch): Use hash table.
3924 (print_insn): Renamed from print_insn_sparc, made static.
3925 Build and use hash table. If !sparc64, ignore sparc64 insns,
3926 and vice-versa if sparc64.
3927 (print_insn_sparc, print_insn_sparc64): New functions.
3928 (compare_opcodes): Move sparc64 opcodes to end.
3929 Print commutative insns with constant second.
3930 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3932 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3934 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3935 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3936 avoids printing a delay slot in a delay slot.
3937 * sh-opc.h (sh_table): Fully bracket last entry.
3939 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3941 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3943 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3945 * configure.in: Get host_makefile_frag from ${srcdir}.
3947 * configure.in: Autoconfiscated. Check for string[s].h. Create
3948 config.h from config.in. Don't set up sysdep.h link.
3949 * sysdep.h: New file.
3950 * configure, config.in: New files, generated from configure.in.
3951 * Makefile.in: Updated to be processed autoconf-style.
3952 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3953 (Makefile): Depend on config.status.
3954 (config.status): New rule.
3955 * configure.bat: Update Makefile substitutions.
3957 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3959 * mips-opc.c (L1): Define.
3960 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3961 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3964 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3966 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3967 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3968 have multiple add units but only a single logical unit.
3970 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3971 shifted by 18, without any insertion or extraction function.
3972 (insert_cr, extract_cr): Remove.
3974 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3976 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3979 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3981 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3982 * sh-opc.h: Add copyright.
3984 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3986 * Makefile.in (crunch-m68k): Delete extra target accidentally
3987 checked in a while ago.
3989 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3991 * sh-opc.h (sh_table): Add SH3 support.
3993 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3995 * sh-opc.h: Added bsrf and braf.
3997 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3999 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4000 bogus [ls]fm{ea,fd} patterns.
4002 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4003 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4004 initialize it from memory. Make function static.
4005 (print_insn_{big,little}_arm): New functions.
4006 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4007 the correct endianness.
4009 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4011 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4014 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4016 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4017 17th, so that it builds again using GCC as the compiler.
4019 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4021 * mips-dis.c (print_insn_little_mips): Cast return value from
4022 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4023 expects an unsigned long, and that might be fewer words of
4024 argument storage (e.g., if bfd_vma is long long on a 32-bit
4026 (print_insn_big_mips): Likewise with bfd_getb32 value.
4027 (_print_insn_mips): Now static.
4029 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4031 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4032 gcc memory hog problem with initializer is fixed.
4034 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4036 Merge in support for Mac MPW as a host.
4037 (Old change descriptions retained for informational value.)
4039 * mpw-config.in (archname): Compute from the config.
4040 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4042 * mpw-config.in (target_arch): Compute from canonical target.
4043 (m68k, mips, powerpc, sparc): Add architectures.
4044 * mpw-make.in (disassemble.c.o): Add.
4045 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4047 * mpw-config.in (BFD_MACHINES): Set to a default value.
4048 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4050 * mpw-make.in (CSEARCH): Add extra-include to search path.
4052 * mpw-config.in (varargs.h): Don't create.
4053 (sysdep.h): Create using forward-include.
4054 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4056 * mpw-config.in: New file, MPW version of configure.in.
4057 * mpw-make.in: New file, MPW version of Makefile.in.
4059 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4061 * alpha-dis.c (print_insn_alpha): Put empty statement after
4064 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4066 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4067 (low_sign_extend): Likewise.
4068 (get_field): Delete unused function.
4069 (set_field, deposit_14, deposit_21): Likewise.
4071 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4073 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4076 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4078 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4080 * alpha-opc.h (OSF_ASMCODE): define
4081 print pal-code names as defined in App C of the
4082 Alpha Architecture Reference Manual
4084 * alpha-dis.c: cleaned up output
4085 print stylized code forms as defined in App A.4.3 of the
4086 Alpha Architecture Reference Manual
4088 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4090 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4092 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4095 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4097 * m68k-dis.c (opcode): New function. Returns address of opcode
4098 table entry given index, even if the opcode table was split to
4099 work around gcc bugs.
4100 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4102 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4103 (reg_names): Now const.
4104 (print_insn_arg): Arrays cacheFieldName and names now const.
4105 (print_indexed): Array scales now const.
4107 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4109 * ppc-opc.c: Sort recently added instructions by minor opcode
4110 number within major opcode number.
4112 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4114 * hppa-dis.c: Include libhppa.h.
4116 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4118 * mips-opc.c: Change dli to use M_DLI, and add dla.
4120 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4122 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4124 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4126 * mips-opc.c: Add r4650 mul instruction.
4128 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4130 * mips-opc.c: Add uld and usd macros for unaligned double load and
4133 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4135 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4136 mfdcr, mtdcr, icbt, iccci.
4138 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4140 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4141 signed char fields to shorts, more portable.
4143 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4145 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4146 char fields as signed chars, since they may have negative values.
4148 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4150 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4151 (mycroft@netbsd.org).
4153 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4155 From "Logg, Ed" <elogg@ea.com>:
4156 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4157 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4160 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4162 * ppc-opc.c: Changes based on patch from David Edelsohn
4163 <edelsohn@mhpcc.edu>.
4164 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4167 (insert_tbr): New static function.
4168 (extract_tbr): New static function.
4169 (XFXFXM_MASK, XFXM): Define.
4170 (XSPRBAT_MASK, XSPRG_MASK): Define.
4171 (powerpc_opcodes): Add instructions to access special registers by
4172 name. Add mtcr and mftbu.
4174 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4176 * mips-opc.c (P3): Define.
4177 (mips_opcodes): Add mad and madu.
4179 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4181 * configure.in: Add W65 support.
4182 * disassemble.c: Likewise.
4183 * w65-opc.h, w65-dis.c: New files.
4185 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4187 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4190 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4192 * mips-opc.c: Add dli as a synonym for li.
4194 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4196 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4197 print something for reserved opcode values, even if it won't
4200 * mips-dis.c (_print_insn_mips): When initializing, shift right
4201 and mask, to avoid sign extension problems on the Alpha.
4203 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4206 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4208 * sh-opc.h (mov.l gbr): Get direction right.
4209 * sh-dis.c (print_insn_shx): New function.
4210 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4211 print opcodes with right byte order.
4213 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4215 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4216 to avoid conflicts with getopt.
4218 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4220 * hppa-dis.c (print_insn_hppa): Read the instruction using
4221 bfd_getb32, so that it works on a little endian or 64 bit host.
4222 Remove unused local variable op.
4224 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4226 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4227 addu does not work correctly if -mips3.
4229 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4231 * a29k-dis.c (print_special): Add special register names defined
4232 on 29030, 29040 and 29050.
4233 (print_insn): Handle new operand type 'I'.
4235 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4237 * Makefile.in (INSTALL): Use top level install.sh script.
4239 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4241 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4242 that it works on a little endian host.
4244 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4246 * configure.in: Use ${config_shell} when running config.bfd.
4248 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4250 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4252 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4254 * a29k-dis.c (print_insn): Print the opcode.
4256 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4258 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4260 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4262 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4264 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4266 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4267 which store a value into memory.
4269 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4271 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4272 * arm-dis.c, arm-opc.h: New files.
4274 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4276 * Makefile.in (ns32k-dis.o): Add dependency.
4277 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4278 string, not as array of chars.
4280 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4282 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4284 * sparc-opc.c: Added sparclite extended FP operations, and
4285 versions of v9 impdep* instructions permitting specification of
4288 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4290 * i960-dis.c (reg_names): Now const.
4291 (struct sparse_tabent): New type, copied from array type in mem
4293 (ctrl): Local static array ctrl_tab now const.
4294 (cobr): Local static array cobr_tab now const.
4295 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4296 static variable mem_tab no longer explicitly initialized. Changed
4297 mem_init to const array of struct sparse_tabent.
4298 (reg): Local static variable reg_tab no longer explicitly
4299 initialized. Changed reg_init to const array of struct
4301 (ea): Local static array scale_tab now const.
4303 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4306 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4308 * configure.bat: the disassember needs to be enabled for
4309 "objdump -d" to work in djgpp.
4311 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4313 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4314 (invalid_float): Enabled general version, doesn't require running
4315 on ns32k host. Changed to take char* argument, and test for
4316 explicitly specified sizes, instead of using sizeof() on host CPU
4318 (INVALID_FLOAT): Cast first argument.
4319 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4320 list_P032, list_M032): Now const.
4321 (optlist, list_search): Made appropriate arguments now point to
4323 (print_insn_arg): Changed static array of one-character-string
4324 pointers into a static const array of characters; fixed sprintf
4325 statement accordingly.
4327 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4329 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4330 from distribution. A ns32k-dis.c from a previous distribution has
4331 been brought up to date and supports the new interface.
4333 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4335 * configure.in: add bfd_ns32k_arch target support.
4337 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4338 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4340 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4342 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4345 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4347 * h8300-dis.c, mips-dis.c: Don't use true and false.
4349 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4351 * configure.in: Change --with-targets to --enable-targets.
4353 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4355 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4356 opcodes to the first instruction with that opcode, to speed
4357 disassembly of large files. From ralphc@pyramid.com (Ralph
4360 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4362 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4364 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4366 * configure.bat: update to latest makefile.in
4368 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4370 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4371 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4372 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4373 slot insn is in a delay slot.
4374 * z8k-opc.h: (resflg): Fix patterns.
4375 * h8500-opc.h Fix CR insn patterns.
4377 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4379 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4380 "cmpl" before POWER versions, so that gas -many uses them.
4382 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4384 * disassemble.c: New file.
4385 * Makefile.in (OFILES): Add disassemble.o.
4386 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4387 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4388 binutils/configure.in.
4390 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4391 opcode being examined.
4393 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4395 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4396 (insert_ral, insert_ram, insert_ras): New functions.
4397 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4398 RAS for store with update.
4400 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4402 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4403 (edelsohn@npac.syr.edu).
4405 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4407 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4410 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4412 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4414 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4416 * ppc-opc.c (powerpc_operands): The signedp field has been
4417 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4418 instead. Add new operand SISIGNOPT.
4419 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4420 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4421 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4424 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4426 * i386-dis.c (struct private): Renamed to dis_private. `private'
4427 is a reserved word for dynix cc.
4429 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4431 * configure.in: Change error message to refer to bfd/config.bfd
4432 rather than bfd/configure.in.
4434 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4436 * ppc-opc.c: Define POWER2 as short alias flag.
4437 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4440 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4442 * i960-dis.c (print_insn_i960): Don't read a second word for
4443 opcodes 0, 1, 2 and 3.
4445 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4447 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4449 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4451 * m68881-ext.c: Removed; no longer used.
4452 * Makefile.in: Changed accordingly.
4454 * m68k-dis.c (ext_format_68881): Don't declare.
4455 (print_insn_m68k): If an instruction uses place 'i', it uses at
4456 least four fixed bytes.
4457 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4458 extended float, convert to double using floatformat_to_double, not
4459 ieee_extended_to_double, and fetch the data before converting it.
4461 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4463 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4464 davidj@ICSI.Berkeley.EDU (David Johnson).
4466 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4468 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4469 PowerPC uses bdnz[l][a].
4471 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4473 * dis-buf.c, i386-dis.c: Include sysdep.h.
4475 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4477 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4479 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4480 by Motorola PowerPC 601 with PPC_OPCODE_601.
4481 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4482 Disassemble Motorola PowerPC 601 instructions as well as normal
4483 PowerPC instructions.
4485 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4487 * i960-dis.c (reg, mem): Just use a static array instead of
4490 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4492 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4493 condition name index if this is for a negated condition.
4495 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4496 Floating point format for 'H' operand is backwards from normal
4497 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4498 operands (fmpyadd and fmpysub), handle bizarre register
4499 translation correctly for single precision format.
4501 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4502 or 'I' operands if the next format specifier is 'M' (fcmp
4503 condition completer).
4505 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4507 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4508 single number giving a bitmask for the MB and ME fields of an M
4509 form instruction. Change NB to accept 32, and turn it into 0;
4510 also turn 0 into 32 when disassembling. Seperated SH from NB.
4511 (insert_mbe, extract_mbe): New functions.
4512 (insert_nb, extract_nb): New functions.
4513 (SC_MASK): Mask out SA and LK bits.
4514 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4515 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4516 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4517 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4518 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4519 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4520 (powerpc_macros): Define table of macro definitions.
4521 (powerpc_num_macros): Define.
4523 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4524 if PPC_OPERAND_NEXT is set.
4526 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4528 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4529 char. Retrieve contents using bfd_getl32 instead of shifting.
4531 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4533 * ppc-opc.c: New file. Opcode table for PowerPC, including
4534 opcodes for POWER (RS/6000).
4535 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4536 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4537 (CFILES): Add ppc-dis.c.
4538 (ppc-dis.o, ppc-opc.o): New targets.
4539 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4541 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4543 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4544 No space before 'u', 'f', or 'N'.
4546 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4548 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4549 farther than we should.
4551 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4553 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4555 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4557 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4559 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4560 needs it, to prevent reading past the end of a section.
4562 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4565 Removed t,A case for la; always use t,A(b) case.
4567 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4569 From Ted Lemen <mellon@pepper.ncd.com>
4570 * mips-dis.c (print_insn_arg): Handle 'k'.
4571 * mips-opc.c: Make cache use k, not t.
4573 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4575 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4576 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4577 FLOAT_FORMAT_CODE to put out floating point register names.
4579 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4583 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4585 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4587 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4589 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4590 larger than 32. Moved dsxx32 variants first for disassembler.
4592 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4594 * z8kgen.c, z8k-opc.h: Add full lda information.
4596 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4598 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4599 movb instructions. Any necessary space will be emitted by
4600 the code to handle nullification completers.
4602 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4604 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4606 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4608 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4609 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4611 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4613 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4615 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4617 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4618 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4620 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4622 * m88k-dis.c (m88kdis): comment change. Remove space after
4624 (printop): handle new arg types DEC and XREG for m88110.
4626 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4628 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4629 type for absolute branch addresses. Delete special
4630 "ble" and "be" code in 'W' operand code.
4632 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4634 * mips-opc.c: Set hazard information correctly for branch
4635 likely instructions.
4637 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4639 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4640 info->fprintf_func for printing and info->print_address_func for
4643 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4645 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4647 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4649 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4650 Corrected second case of "b" for disassembler.
4652 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4654 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4655 to BFD swapping routines to correspond to BFD name changes.
4657 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4659 * mips-opc.c: Change div machine instruction to be z,s,t rather
4660 than s,t. Change div macro to be d,v,t rather than d,s,t.
4661 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4662 rem and remu which generates only the corresponding div
4663 instruction. This is for compatibility with the MIPS assembler,
4664 which only generates the simple machine instruction when an
4665 explicit destination of $0 is used.
4666 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4668 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4670 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4671 WR_31 hazard for bal, bgezal, bltzal.
4673 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4675 * hppa-dis.c (print_insn_hppa): Use print function
4676 from within the disassemble_info, not fprintf_filtered.
4678 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4680 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4681 Law, law@cs.utah.edu.)
4683 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4685 * mips-opc.c ("absu"): Removed.
4688 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4690 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4691 Changed hazard information to distinguish between memory load
4692 delays and coprocessor load delays.
4694 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4696 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4698 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4700 * configure.in: Don't pass cpu to config.bfd.
4702 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4704 * m88k-dis.c (m88kdis): Make class unsigned.
4706 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4708 * alpha-dis.c (print_insn_alpha): One branch format case was
4709 missing the instruction name.
4711 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4713 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4714 Add the arch-specific auxiliary files.
4715 (OFILES): Remove the arch-specific auxiliary files
4716 and use BFD_MACHINES instead of DIS_LIBS.
4717 * configure.in: Set BFD_MACHINES based on --with-targets option.
4719 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4721 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4724 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4726 * sparc-opc.c: Change CONST to const to deal with gcc
4727 -Dconst=__const -traditional.
4729 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4731 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4732 coprocessor instructions out of #if 0, and made them use new
4735 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4737 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4739 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4741 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4742 instruction, for use by the disassembler.
4744 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4745 hand-coded sign extensions that depended on 32-bit host ints.
4746 FIXME, we still depend on big-endian host bitfield ordering.
4747 (sparc_print_insn): Set the insn_info_valid field, and the
4748 other fields that describe the instruction being printed.
4750 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4752 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4753 `jmp' instead of just one of them.
4755 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4757 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4758 (fput_fp_reg_r): Renamed from fput_reg_r.
4759 (fput_fp_reg): New function.
4760 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4762 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4764 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4766 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4768 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4770 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4771 don't output a space.
4773 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4775 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4777 * mips-opc.c: New file, containing opcode table from
4778 ../include/opcode/mips.h.
4779 * Makefile.in: Add it.
4781 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4783 * m88k-dis.c: New file, moved in from gdb and changed to use the
4784 new dis-asm.h disassembler interface.
4785 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4786 (m88k-dis.o): New target.
4788 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4790 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4791 argument string const char * to correspond to opcode/mips.h.
4793 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4795 * mips-dis.c: Updated to account for name changes in new version
4797 * Makefile.in: Added header file dependencies.
4799 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4801 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4803 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4805 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4806 extend, rather than shifts.
4808 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4810 * Makefile.in: Undo 15 June change.
4812 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4814 * m68k-dis.c (print_insn_arg): Change return value to byte count
4816 * m68k-dis.c: Re-write to detect invalid operands before
4817 printing anything, so we can handle this the same way we
4818 handle invalid opcodes.
4820 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4822 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4824 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4826 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4829 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4831 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4833 * configure.in: Do make sysdep.h link.
4834 * Makefile.in: Search ../include. Don't search ../bfd.
4836 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4838 Changes from Jeff Law, law@cs.utah.edu:
4839 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4840 Do not print a space before the completers specified by
4843 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4845 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4846 defined, since gdb has been fixed.
4848 Changes from Jeff Law, law@cs.utah.edu:
4849 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4850 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4851 be a *disassemble_info, not a *FILE.
4852 * hppa-dis.c: Support 'd', '!', and 'a'.
4853 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4854 * hppa-dis.c: Delete cases which are no longer needed.
4856 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4858 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4860 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4862 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4865 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4867 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4868 * configure.in: No longer need to configure to get sysdep.h.
4870 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4872 * Patches from Jeffrey Law <law@cs.utah.edu>.
4873 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4874 templates for 1.1 FP computational instructions.
4876 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4878 * h8500-dis.c (print_insn_h8500): Address argument is type
4880 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4883 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4884 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4886 * sparc-dis.c (compare_opcodes): Move static declaration to
4889 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4891 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4892 instruction, remove unimp hack from 'l' argument.
4894 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4896 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4899 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4901 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4902 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4905 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4907 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4908 arrays of string pointers to 2-d arrays of chars, to save
4911 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4913 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4914 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4916 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4918 * hppa-dis.c: New file from Utah, adapted to new disassembler
4920 * Makefile.in: Include it.
4922 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4924 * sh-dis.c, sh-opc.h: New files.
4926 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4928 * alpha-dis.c, alpha-opc.h: New files.
4930 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4932 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4935 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4937 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4939 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4941 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4944 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4946 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4947 and double percent signs a few places.
4949 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4951 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4952 Use info->print_address_func not print_address.
4954 * dis-buf.c (generic_print_address): New function.
4956 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4958 * Makefile.in: Add sparc-dis.c.
4959 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4961 Add `add' instruction to the set that get checked
4962 for a preceding `sethi' in order to print an absolute address.
4963 * (print_insn): Disassembly prefers real instructions.
4964 (is_delayed_branch): Speed up.
4965 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4966 Still missing some float ops, and needs testing.
4967 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4968 F_ALIAS. Use printf, not fprintf, when not passing a file
4970 (compare_opcodes): Check that identical instructions have
4971 identical opcodes, complain otherwise.
4974 * Include reg_names.
4976 Use dis-asm.h/read_memory_func interface.
4978 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4980 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4981 deliberately return non-zero to setjmp from longjmp. Otherwise
4982 this code fails to compile.
4984 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4986 * m68k-dis.c: Fix prototype for fetch_arg().
4988 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4990 * dis-buf.c: New file, for new read_memory_func interface.
4991 Makefile.in (OFILES): Include it.
4992 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4993 Use new read_memory_func interface.
4995 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4997 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4998 * h8500-opc.h: Fix couple of opcodes.
5000 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5002 * Makefile.in: add dvi & installcheck targets
5004 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5006 * Makefile.in: Update for h8500-dis.c.
5008 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5010 * h8500-dis.c, h8500-opc.h: New files
5012 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5014 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5015 ../include/dis-asm.h.
5016 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5017 and ../gdb/m68k-pinsn.c).
5018 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5019 and ../gdb/i386-pinsn.c).
5020 * m68881-ext.c: New file. Moved definition of
5021 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5022 * Makefile.in: Adjust for new files.
5023 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5024 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5025 can be dis-assembled.
5027 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5029 * mips-dis.c (print_insn_arg): Now returns void.
5031 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5033 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5034 files that use the macros.
5036 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5038 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5039 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5040 (CFILES): Added mips-dis.c.
5042 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5044 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5045 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5047 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5049 * Makefile.in: Improve *clean rules.
5050 * configure.in: Allow a default host.
5052 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5054 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5055 files include other sysdep files
5057 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5059 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5061 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5063 * configure.in: For host support, use ../bfd/configure.host
5064 so it stays in sync with the ../bfd/hosts database.
5066 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5068 * configure.in: use cpu-vendor-os triple instead of nested cases
5070 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5072 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5073 *always* the wrong one.
5075 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5077 * z8kgen.c: added copyright info
5079 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5081 * z8k-dis.c (unparse_instr): prettier tabs
5082 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5084 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5086 * configure.in: Add ncr* configuration.
5087 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5088 picayune ANSI compilers happy.
5090 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5092 * configure.in (i386): Make i386 and i486 synonymous for now.
5093 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5095 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5097 * Makefile.in (install): Fix typo.
5099 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5101 * Makefile.in (make): Remove obsolete crud.
5102 (sparc-opc.o): Avoid Sun Make VPATH bug.
5104 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5106 * Makefile.in: since there are no SUBDIRS, remove rule and
5107 references of subdir_do.
5109 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5111 * Makefile.in (install): Get the library name right here too.
5112 Don't install bfd.h, since it's unrelated to this library. No
5113 subdirs to recurse into, either.
5114 (CFILES): The source file has a .c suffix, not .o.
5116 * sparc-opc.c: New file, moved from BFD.
5117 * Makefile.in (OFILES): Build it.
5119 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5121 * z8k-dis.c: fixed forward refferences of some declarations.
5123 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5125 * Makefile.in: get the name of the library right
5127 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5129 * z8k-dis.c: knows how to disassemble z8k stuff
5130 * z8k-opc.h: new file full of z8000 opcodes
5134 version-control: never