opcodes/ChangeLog

   1 2001-05-14  J.T. Conklin  <jtc@redback.com>
   2
   3         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
   4         simplified mnemonics used for setting PPC750-specific special
   5         purpose registers.
   6
   7 2001-05-12  H.J. Lu  <hjl@gnu.org>
   8
   9         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
  10         `rm'.
  11
  12 2001-05-12  Peter Targett  <peter.targett@arccores.com>
  13
  14         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
  15         register to r/w.  Formatting fixes throughout file.
  16
  17 2001-05-12  Alan Modra  <amodra@one.net.au>
  18
  19         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
  20         movq operands.
  21         (twobyte_has_modrm): Update table.
  22         (need_modrm): Give it file scope.
  23         (MODRM_CHECK): Define.
  24         (dofloat): Use MODRM_CHECK.
  25         (OP_E): Likewise.
  26         (OP_EM): Likewise.
  27         (OP_EX): Likewise.
  28
  29 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
  30
  31         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
  32         even at end of a section.
  33         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
  34         by ignoring precariously-unpacked insn_value in favor of raw buffer.
  35
  36 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
  37
  38         * disassemble.c (disassembler_usage): Remove unused attribute.
  39
  40 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
  41
  42         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
  43
  44 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
  45
  46         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
  47         assume incoming buffer already has the base insn loaded.  Handle
  48         smaller-than-base instructions for variable-length case.
  49
  50 2001-05-04  Alan Modra  <amodra@one.net.au>
  51
  52         * i386-dis.c (Ev, Ed): Remove duplicate define.
  53         (Gd): Define.
  54         (XS): Define.
  55         (OP_XS): New function.
  56         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
  57         movmskp operands.
  58         (dis386_twobyte_intel): Likewise.
  59         (prefix_user_table): Use MS for maskmovq operand.
  60
  61 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
  62
  63         * Makefile.am: Add OpenRISC target.
  64         * Makefile.in: Regenerated.
  65
  66         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
  67
  68         * configure.in (bfd_openrisc_arch): Add target.
  69         * configure: Regenerated.
  70
  71         * openrisc-asm.c: New file.
  72         * openrisc-desc.c: Likewise.
  73         * openrisc-desc.h: Likewise.
  74         * openrisc-dis.c: Likewise.
  75         * openrisc-ibld.c: Likewise.
  76         * openrisc-opc.c: Likewise.
  77         * openrisc-opc.h: Likewise.
  78
  79 2001-04-24  Christian Groessler  <cpg@aladdin.de>
  80
  81         * z8k-dis.c: add names of control registers (ctrl_names);
  82         (seg_length): provides instruction length fixup for segmented
  83         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
  84         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
  85         (unparse_intr): handle CLASS_PR, print addresses without '#'
  86         * z8k-opc.h: re-created with new z8kgen
  87         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
  88         entries for ldctl/ldctlb instruction
  89
  90 2001-04-06  Andreas Jaeger  <aj@suse.de>
  91
  92         * i386-dis.c: Add ffreep instruction.
  93
  94 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
  95
  96         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
  97
  98 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
  99
 100         * i386-dis.c (PREGRP25): Define.
 101         (dis386_twobyte_att): Use here in place of "movntq" entry.
 102         (dis386_twobyte_intel): Likewise.
 103         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 104         (PREGRP26): Define.
 105         (dis386_twobyte_att): Use here.
 106         (dis386_twobyte_intel): Likewise.
 107         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 108         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 109         (prefix_user_table): Cosmetic changes to "bad" entries.
 110
 111 2001-03-23  Nick Clifton  <nickc@redhat.com>
 112
 113         * mips-opc.c: Remove extraneous whitespace.
 114         * mips-dis.c: Remove extraneous whitespace.
 115
 116 2001-03-22  Ben Elliston  <bje@redhat.com>
 117
 118         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 119         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 120         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 121         to allay a compiler warning.
 122
 123 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 124
 125         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 126         (dis386_twobyte_intel): Likewise.
 127         (twobyte_has_modrm): Set entry for paddq, psubq.
 128
 129 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 130
 131         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 132         determination via CGEN_COMPUTE_MACH.
 133         * fr30-desc.c: Regenerate.
 134         * fr30-dis.c: Regenerate.
 135         * fr30-opc.h: Regenerate.
 136         * m32r-desc.c: Regenerate.
 137         * m32r-dis.c: Regenerate.
 138         * m32r-opc.h: Regenerate.
 139         * m32r-opinst.c: Regenerate.
 140
 141 2001-03-20  H.J. Lu  <hjl@gnu.org>
 142
 143         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 144         * configure: Rebuild.
 145
 146 2001-03-19  Jim Wilson  <wilson@redhat.com>
 147
 148         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 149         notestr if larger than xsect.
 150         (in_class): Handle format M5.
 151         * ia64-asmtab.c: Regnerate.
 152
 153 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 154
 155         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 156         has more than one byte left to read.
 157
 158 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 159
 160         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 161         * s390-opc.txt: Add new opcodes.
 162
 163 2001-03-06  Nick Clifton  <nickc@redhat.com>
 164
 165         * arm-dis.c (print_insn_thumb): Compute destination address
 166         of BLX(1) instruction by taking bit 1 from PC and not from bit
 167         0 of the offset.
 168
 169 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 170
 171         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 172         so command line switches will work.
 173
 174 2001-03-05  Dave Brolley  <brolley@redhat.com>
 175
 176         * fr30-asm.c: Regenerate.
 177         * fr30-desc.c: Regenerate.
 178         * fr30-desc.h: Regenerate.
 179         * fr30-dis.c: Regenerate.
 180         * fr30-ibld.c: Regenerate.
 181         * fr30-opc.c: Regenerate.
 182         * fr30-opc.h: Regenerate.
 183         * m32r-asm.c: Regenerate.
 184         * m32r-desc.c: Regenerate.
 185         * m32r-desc.h: Regenerate.
 186         * m32r-dis.c: Regenerate.
 187         * m32r-ibld.c: Regenerate.
 188         * m32r-opc.c: Regenerate.
 189         * m32r-opc.h: Regenerate.
 190         * m32r-opinst.c: Regenerate.
 191
 192 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 193
 194         * m68k-opc.c: fix cpushl according to Motorola. Enable
 195         bunch of instructions for Coldfire 5407 and add all new.
 196
 197 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 198
 199         * configure.in (BFD_VERSION): Do without grep.
 200         * configure: Regenerate.
 201         * Makefile.am: Run "make dep-am".
 202         * Makefile.in: Regenerate.
 203
 204 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 205
 206         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 207         * ia64-asmtab.c: Regenerate.
 208
 209 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 210
 211         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 212         separate variants: one for IMM22 and the other for IMM14.
 213         * ia64-asmtab.c: Regenerate.
 214
 215 2001-02-21  Greg McGary  <greg@mcgary.org>
 216
 217         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 218
 219 2001-02-20  H.J. Lu  <hjl@gnu.org>
 220
 221         * Makefile.am (ia64-ic.tbl): Remove the target.
 222         (ia64-raw.tbl): Likewise.
 223         (ia64-waw.tbl): Likewise.
 224         (ia64-war.tbl): Likewise.
 225         (ia64-asmtab.c): Generate it in the source directory.
 226         * Makefile.in: Regenerated.
 227
 228 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 229
 230         * Makefile.am: Add PDP-11 target.
 231         * configure.in: Likewise.
 232         * disassemble.c: Likewise.
 233         * pdp11-dis.c: New file.
 234         * pdp11-opc.c: New file.
 235
 236 2001-02-14  Jim Wilson  <wilson@redhat.com>
 237
 238         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 239         * ia64-asmtab.c: Regenerate.
 240
 241 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 242
 243         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 244         instructions.
 245         (putop): Handle 'Y'
 246
 247 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 248
 249         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 250         the following instruction not of the jump itself for the jump
 251         target.
 252         (print_mips16_insn_arg): Likewise.
 253
 254 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 255
 256         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 257         directory.
 258         * Makefile.in: Regenerate.
 259
 260 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 261
 262         * Makefile.am: Add linux target for S/390.
 263         * Makefile.in: Likewise.
 264         * configure.in: Likewise.
 265         * disassemble.c: Likewise.
 266         * s390-dis.c: New file.
 267         * s390-mkopc.c: New file.
 268         * s390-opc.c: New file.
 269         * s390-opc.txt: New file.
 270
 271 2001-02-05  Jim Wilson  <wilson@redhat.com>
 272
 273         * ia64-asmtab.c: Revert 2000-12-16 change.
 274
 275 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 276
 277         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 278         * m32r-desc.h: Regenerate.
 279
 280 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 281
 282         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 283         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 284
 285 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 286
 287         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 288
 289 2001-01-13  Nick Clifton  <nickc@redhat.com>
 290
 291         * disassemble.c: Remove spurious white space.
 292
 293 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 294
 295         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 296         templates.
 297
 298 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 299
 300         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 301         * Makefile.am (C_FILES): Add arc-ext.c.
 302         (ALL_MACHINES) Add arc-ext.lo.
 303         (INCLUDES) Add opcode directory to list.
 304         New dependency entry for arc-ext.lo.
 305         * disassemble.c (disassembler): Correct call to
 306         arc_get_disassembler.
 307         * arc-opc.c: New update for ARC, including full base
 308         instructions for ARC variants.
 309         * arc-dis.h, arc-dis.c: New update for ARC, including
 310         extensibility functionality.
 311         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 312
 313 2001-01-10  Jan Hubicka  <jh@suse.cz>
 314
 315         * i386-dis.c (PREGRP15 - PREGRP24): New.
 316         (dis386_twobyt): Add SSE2 instructions.
 317         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 318         (twobyte_uses_f3_prefix): ... this one.
 319         (grps): Add SSE instructions.
 320         (prefix_user_table): Add two new slots; add SSE2 instructions.
 321         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 322         Handle the REPNZ and Data16 prefixes as well; do proper lookup
 323         to prefix_user_table.
 324         (OP_E): Accept mfence and lfence as well.
 325         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
 326         (OP_XMM): Support REX extensions.
 327         (OP_EM): Likewise.
 328         (OP_EX): Likewise.
 329
 330 2001-01-09  Nick Clifton  <nickc@redhat.com>
 331
 332         * arm-dis.c (print_insn): Set pc to zero for instructions with
 333         a reloc associated with them.
 334
 335 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
 336
 337         * cgen-asm.in (parse_insn_normal): Changed syn to be
 338         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
 339         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
 340         to '\0' to use 0 instead.
 341         * cgen-dis.in (print_insn_normal): Ditto.
 342         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
 343
 344 2001-01-05  Jan Hubicka  <jh@suse.cz>
 345
 346         * i386-dis.c: Add x86_64 support.
 347         (rex): New static variable.
 348         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
 349         (USED_REX): New macro.
 350         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
 351         (OP_I64, OP_OFF64, OP_IMREG): New functions.
 352         (OP_REG, OP_OFF): Declare.
 353         (get64, get32, get32s): New functions.
 354         (r??_reg): New constants.
 355         (dis386_att): Change templates of instruction implicitly promoted
 356         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
 357         (grps): Likewise.
 358         (dis386_intel): Likewise.
 359         (dixx86_64_att): New table based on dis386_att.
 360         (dixx86_64_intel): New table based on dis386_intel.
 361         (names64, names8rex): New global variable.
 362         (names32, names16): Add extended registers.
 363         (prefix_user_t): Recognize rex prefixes.
 364         (prefix_name): Print REX prefixes nicely.
 365         (op_riprel): New global variable.
 366         (start_pc): Set type to bfd_vma.
 367         (print_insn_i386): Detect the 64bit mode and use proper table;
 368         move ckprefix after initializing the buffer; output unused rex prefixes;
 369         output information about target of RIP relative addresses.
 370         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
 371         (print_operand_value): New function.
 372         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
 373         REX prefix and new modes.
 374         (get64, get32s): New.
 375         (get32): Return bfd_signed_vma type.
 376         (set_op): Initialize the op_riprel.
 377         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
 378
 379 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
 380
 381          cgen-dis.in (read_insn): Use bfd_get_bits()
 382
 383 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
 384
 385         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
 386         (hash_insn_list): Likewise
 387         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
 388         (extract_1): Use bfd_get_bits().
 389         (extract_normal): Apply sign extension to both extraction
 390         methods.
 391         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
 392         (cgen_put_insn_value): Use bfd_put_bits()
 393
 394 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
 395
 396         * cgen-asm.in (parse_insn_normal): Print better error message for
 397         instructions with missing operands.
 398
 399 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
 400
 401         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
 402
 403 2000-12-16  Nick Clifton  <nickc@redhat.com>
 404
 405         * Makefile.in: Regenerate.
 406         * aclocal.m4: Regenerate.
 407         * config.in: Regenerate.
 408         * configure.in: Add spacing.
 409         * configure: Regenerate.
 410         * ia64-asmtab.c: Regenerate.
 411         * po/opcodes.pot: Regenerate.
 412
 413 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
 414
 415         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
 416         error messages over later parse-time ones.
 417
 418 2000-12-12  Jim Wilson  <wilson@redhat.com>
 419
 420         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
 421         argument.
 422         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
 423         (print_dependency_table): Print NULL if semantics field not set.
 424         (insert_opcode_dependencies): Mark cmp parameter as unused.
 425         (print_main_table): Use fprintf_vma to print long long fields.
 426         (main): Mark argv paramter as unused.  Convert to old style definition.
 427         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
 428         * ia64-asmtab.c: Regnerate.
 429
 430 2000-12-09  Nick Clifton  <nickc@redhat.com>
 431
 432         * m32r-dis.c (print_insn): Prevent re-read of instruction from
 433         wrong address.
 434
 435         * fr30-dis.c: Regenerate.
 436
 437 2000-12-08  Peter Targett  <peter.targett@arccores.com>
 438
 439         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 440         * Makefile.am (C_FILES): Add arc-ext.c.
 441         (ALL_MACHINES) Add arc-ext.lo.
 442         (INCLUDES) Add opcode directory to list.
 443         New dependency entry for arc-ext.lo.
 444         * disassemble.c (disassembler): Correct call to
 445         arc_get_disassembler.
 446         * arc-opc.c: New update for ARC, including full base
 447         instructions for ARC variants.
 448         * arc-dis.h, arc-dis.c: New update for ARC, including
 449         extensibility functionality.
 450         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 451
 452 2000-12-03  Chris Demetriou   cgd@sibyte.com
 453
 454         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
 455         MOD_HILO, and MOD_LO macros.
 456
 457         * mips-opc.c (M1, M2): Delete.
 458         (mips_builtin_opcodes): Remove all uses of M1.
 459
 460         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
 461         instructions take "G" format second operands and use the
 462         correct flags.
 463         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
 464         match.
 465         Delete "sel" code operands from mfc1 and mtc1.
 466         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
 467         for dm[ft]c[023].
 468
 469 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
 470             Chris Demetriou   cgd@sibyte.com
 471
 472         * mips-opc.c (mips_builtin_opcodes): Finish additions
 473         for MIPS32 support, and clean up existing entries for
 474         aesthetics, consistency with the MIPS32 ISA, and
 475         with consistency the rest of the table.
 476
 477 2000-12-01  Nick Clifton  <nickc@redhat.com>
 478
 479         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
 480         field.
 481
 482 2000-12-01  Chris Demetriou <cgd@sibyte.com>
 483
 484         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
 485         specifiers.  Update 'B' for new constant names, and remove
 486         'm'.
 487         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
 488         near the top of the array, so they are disassembled properly.
 489         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
 490         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
 491         specifier.  Add 'H' format specifier variants for "mfc1,"
 492         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
 493         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
 494         "wait" variant which uses 'J' operand specifier.
 495
 496         * mips-dis.c (set_mips_isa_type): Update to use
 497         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
 498         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
 499         * mips-opc.c (I32): New constant for instructions added in
 500         MIPS32.
 501         (P4): Delete.
 502         (mips_builtin_opcodes) Replace all uses of P4 with I32.
 503
 504         * mips-dis.c (set_mips_isa_type): Add cases for
 505         bfd_mach_mips5 and bfd_mach_mips64.
 506         * mips-opc.c (I64): New definitions.
 507
 508         * mips-dis.c (set_mips_isa_type): Add case for
 509         bfd_mach_mips_sb1.
 510
 511 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
 512
 513         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
 514         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
 515         Initialize variable dc to NULL.
 516         (print_insn_shx): Remove unused label d_reg_n.
 517
 518 2000-11-24  Nick Clifton  <nickc@redhat.com>
 519
 520         * arm-opc.h: Add new opcode formatting parameter 'B'.
 521         (arm_opcodes): Add XScale, v5, and v5te instructions.
 522         (thumb_opcodes): Add v5t instructions.
 523
 524         * arm-dis.c (print_insn_arm): Handle new 'B' format
 525         parameter.
 526         (print_insn_thumb): Decode BLX(1) instruction.
 527
 528 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
 529
 530         * mips-opc.c: Fix file header comment.
 531
 532 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
 533
 534         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
 535         print_insn_cris_with_register_prefix.
 536
 537 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
 538
 539         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
 540
 541 2000-11-07  Matthew Green  <mrg@redhat.com>
 542
 543         * cgen-dis.in (print_insn): All insns which can fit into insn_value
 544         must be loaded there in their entirety.
 545
 546 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
 547
 548         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
 549         (compute_arch_mask): Add v8plusb and v9b machines.
 550         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
 551         * sparc-opc.c: Support for Cheetah instruction set.
 552         (prefetch_table): Add #invalidate.
 553
 554 2000-10-16  Nick Clifton  <nickc@redhat.com>
 555
 556         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
 557
 558 2000-10-06  Dave Brolley  <brolley@redhat.com>
 559
 560         * fr30-desc.h: Regenerate.
 561         * m32r-desc.h: Regenerate.
 562         * m32r-ibld.c: Regenerate.
 563
 564 2000-10-05  Jim Wilson  <wilson@redhat.com>
 565
 566         * ia64-ic.tbl: Update from Intel.
 567         * ia64-asmtab.c: Regenerate.
 568
 569 2000-10-04  Kazu Hirata  <kazu@hxi.com>
 570
 571         * ia64-gen.c: Convert C++-style comments to C-style comments.
 572         * tic54x-dis.c: Likewise.
 573
 574 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
 575
 576         Changes to add dollar prefix to registers for files where user symbols
 577         don't have a leading underscore.  Fix formatting.
 578         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
 579         (format_reg): Add parameter with_reg_prefix.  All callers changed.
 580         (print_with_operands): Ditto.
 581         (print_insn_cris_generic): Renamed from print_insn_cris, add
 582         parameter with_reg_prefix.
 583         (print_insn_cris_with_register_prefix,
 584         print_insn_cris_without_register_prefix, cris_get_disassembler):
 585         New.
 586         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
 587
 588 2000-09-22  Jim Wilson  <wilson@redhat.com>
 589
 590         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
 591         gt, ge, ngt, and nge.
 592         * ia64-asmtab.c: Regenerate.
 593
 594         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
 595         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
 596         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
 597         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
 598         * ia64-asmtab.c: Regnerate.
 599
 600 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
 601
 602         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
 603         Add mfc0 and mtc0 with sub-selection values.
 604         Add clo and clz opcodes.
 605         Add msub and msubu instructions for MIPS32.
 606         Add madd/maddu aliases for mad/madu for MIPS32.
 607         Support wait, deret, eret, movn, pref for MIPS32.
 608         Support tlbp, tlbr, tlbwi, tlbwr.
 609         (P4): New define.
 610
 611         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
 612         (print_insn_arg): Handle 'H' args.
 613         (set_mips_isa_type): Recognize 4K.
 614         Use CPU_* defines instead of hardcoded numbers.
 615
 616 2000-09-11  Catherine Moore <clm@redhat.com>
 617
 618         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
 619         (d30v_format_tab): Use Rb2 for modinc and moddec.
 620
 621 2000-09-07  Catherine Moore  <clm@redhat.com>
 622
 623         * d30v-opc.c (d30v_format_tab): Use format Ra for
 624         modinc and moddec.
 625
 626 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
 627
 628         * configure: Rebuilt with new libtool.m4.
 629
 630 2000-09-05  Nick Clifton  <nickc@redhat.com>
 631
 632         * configure: Regenerate.
 633         * po/opcodes.pot: Regenerate.
 634
 635 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
 636
 637         * acinclude.m4: Include libtool and gettext macros from the
 638         top level.
 639         * aclocal.m4, configure: Rebuilt.
 640
 641 2000-08-30  Kazu Hirata  <kazu@hxi.com>
 642
 643         * tic80-dis.c: Fix formatting.
 644
 645 2000-08-29  Kazu Hirata  <kazu@hxi.com>
 646
 647         * w65-dis.c: Fix formatting.
 648
 649 2000-08-28  Mark Hatle  <mhatle@mvista.com>
 650
 651         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
 652         (powerpc_opcodes): Add table entries for PPC 405 instructions.
 653         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
 654         instructions.  Added extended mnemonic mftbl as defined in the
 655         405GP manual for all PPCs.
 656
 657 2000-08-28  Jim Wilson  <wilson@redhat.com>
 658
 659         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
 660         call.  Change last goto to use failed instead of done.
 661
 662 2000-08-28  Dave Brolley  <brolley@redhat.com>
 663
 664         * cgen-ibld.in (cgen_put_insn_int_value): New function.
 665         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 666         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
 667         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 668         * cgen-dis.in (read_insn): New static function.
 669         (print_insn): Use read_insn to read the insn into the buffer and set
 670         up for disassembly.
 671         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
 672         in the buffer.
 673         * fr30-asm.c: Regenerated.
 674         * fr30-desc.c: Regenerated.
 675         * fr30-desc.h: Regenerated.
 676         * fr30-dis.c: Regenerated.
 677         * fr30-ibld.c: Regenerated.
 678         * fr30-opc.c: Regenerated.
 679         * fr30-opc.h: Regenerated.
 680         * m32r-asm.c: Regenerated.
 681         * m32r-desc.c: Regenerated.
 682         * m32r-desc.h: Regenerated.
 683         * m32r-dis.c: Regenerated.
 684         * m32r-ibld.c: Regenerated.
 685         * m32r-opc.c: Regenerated.
 686
 687 2000-08-28  Kazu Hirata  <kazu@hxi.com>
 688
 689         * tic30-dis.c: Fix formatting.
 690
 691 2000-08-27  Kazu Hirata  <kazu@hxi.com>
 692
 693         * sh-dis.c: Fix formatting.
 694
 695 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
 696
 697         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
 698
 699 2000-08-24  Kazu Hirata  <kazu@hxi.com>
 700
 701         * z8k-dis.c: Fix formatting.
 702
 703 2000-08-16  Jim Wilson  <wilson@redhat.com>
 704
 705         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
 706         break, mov-immediate, nop.
 707         * ia64-opc-f.c: Delete fpsub instructions.
 708         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
 709         address operand.  Rewrite using macros to avoid long lines.
 710         * ia64-opc.h (POSTINC): Define.
 711         * ia64-asmtab.c: Regenerate.
 712
 713 2000-08-15  Jim Wilson  <wilson@redhat.com>
 714
 715         * ia64-ic.tbl: Add missing entries.
 716
 717 2000-08-08  Jason Eckhardt  <jle@redhat.com>
 718
 719         * i860-dis.c (print_br_address): Change third argument from int
 720         to long.
 721
 722 2000-08-07  Richard Henderson  <rth@redhat.com>
 723
 724         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
 725         for MLI templates.  Handle IA64_OPND_TGT64.
 726
 727 2000-08-04  Ben Elliston  <bje@redhat.com>
 728
 729         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
 730         * cgen.sh: Likewise.
 731
 732 2000-08-02  Jim Wilson  <wilson@redhat.com>
 733
 734         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
 735
 736 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
 737
 738         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
 739         Change return type from void to int.  Check the combination
 740         of operands, return 1 if valid.  Fix to avoid BUF overflow.
 741         Report undefined combinations of operands in COMMENT.
 742         Report internal errors to stderr.  Output the adiw/sbiw
 743         constant operand in both decimal and hex.
 744         (print_insn_avr): Disassemble ldd/std with displacement of 0
 745         as ld/st.  Check avr_operand () return value, handle invalid
 746         combinations of operands like unknown opcodes.
 747
 748 2000-07-28  Ben Elliston  <bje@redhat.com>
 749
 750         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
 751         (run-cgen, stamp-m32r, stamp-fr30): New targets.
 752         * Makefile.in: Regenerate.
 753         * configure.in: Add --enable-cgen-maint option.
 754         * configure: Regenerate.
 755
 756 2000-07-26  Dave Brolley  <brolley@redhat.com>
 757
 758         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
 759         (cgen_hw_lookup_by_num): Ditto.
 760         (cgen_operand_lookup_by_name): Ditto.
 761         (print_address): Ditto.
 762         (print_keyword): Ditto.
 763         * cgen-dis.c (hash_insn_array): Mark unused parameters with
 764         ATTRIBUTE_UNUSED.
 765         * cgen-asm.c (hash_insn_array): Mark unused parameters with
 766         ATTRIBUTE_UNUSED.
 767         (cgen_parse_keyword): Ditto.
 768
 769 2000-07-22  Jason Eckhardt  <jle@redhat.com>
 770
 771         * i860-dis.c: New file.
 772         (print_insn_i860): New function.
 773         (print_br_address): New function.
 774         (sign_extend): New function.
 775         (BITWISE_OP): New macro.
 776         (I860_REG_PREFIX): New macro.
 777         (grnames, frnames, crnames): New structures.
 778
 779         * disassemble.c (ARCH_i860): Define.
 780         (disassembler): Add check for bfd_arch_i860 to set disassemble
 781         function to print_insn_i860.
 782
 783         * Makefile.in (CFILES): Added i860-dis.c.
 784         (ALL_MACHINES): Added i860-dis.lo.
 785         (i860-dis.lo): New dependences.
 786
 787         * configure.in: New bits for bfd_i860_arch.
 788
 789         * configure: Regenerated.
 790
 791 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
 792
 793         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
 794         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
 795         (cris-dis.lo, cris-opc.lo): New rules.
 796         * Makefile.in: Rebuild.
 797         * configure.in (bfd_cris_arch): New target.
 798         * configure: Rebuild.
 799         * disassemble.c (ARCH_cris): Define.
 800         (disassembler): Support ARCH_cris.
 801         * cris-dis.c, cris-opc.c: New files.
 802         * po/POTFILES.in, po/opcodes.pot: Regenerate.
 803
 804 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
 805
 806         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
 807         Reported by Bill Clarke <llib@computer.org>.
 808
 809 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
 810
 811         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
 812         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
 813
 814 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
 815
 816         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
 817         fput_const, extract_3, extract_5_load, extract_5_store,
 818         extract_5r_store, extract_5R_store, extract_10U_store,
 819         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
 820         extract_12, extract_17, extract_22): Prototype.
 821         (print_insn_hppa): Rename inner block opcode -> opc to avoid
 822         shadowing outer block.
 823         (GET_BIT): Define.
 824
 825 2000-07-05  DJ Delorie  <dj@redhat.com>
 826
 827         * MAINTAINERS: new
 828
 829 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
 830
 831         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
 832
 833 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
 834
 835         * avr-dis.c (avr_operand): Change _ () to _() around all strings
 836         marked for translation (exception from the usual coding style).
 837         (print_insn_avr): Initialize insn2 to avoid warnings.
 838
 839 2000-07-03  Kazu Hirata  <kazu@hxi.com>
 840
 841         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
 842         * h8500-dis.c: Fix formatting.
 843
 844 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
 845
 846         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
 847         (CLEANFILES): Add DEPA.
 848         * Makefile.in: Regenerate.
 849
 850 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
 851
 852         * arm-dis.c (regnames): Add an additional register set to match
 853         the set used by GCC.  Make it the default.
 854
 855 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
 856
 857         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
 858         find one.
 859         * Makefile.in: Regenerate.
 860
 861 2000-06-20  H.J. Lu  <hjl@gnu.org>
 862
 863         * Makefile.am: Rebuild dependency.
 864         * Makefile.in: Rebuild.
 865
 866 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
 867
 868         * Makefile.in, configure: regenerate
 869         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
 870         ARCH_m68hc11.
 871         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
 872         New functions.
 873         * configure.in: Recognize m68hc12 and m68hc11.
 874         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
 875         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
 876         and opcode generation for m68hc11 and m68hc12.
 877
 878 2000-06-16  Nick Duffek  <nsd@redhat.com>
 879
 880         * disassemble.c (disassembler): Refer to the PowerPC 620 using
 881         bfd_mach_ppc_620 instead of 620.
 882
 883 2000-06-12  Kazu Hirata  <kazu@hxi.com>
 884
 885         * h8300-dis.c: Fix formatting.
 886         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
 887         correctly.
 888
 889 2000-06-09  Denis Chertykov  <denisc@overta.ru>
 890
 891         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
 892
 893 2000-06-07  Denis Chertykov  <denisc@overta.ru>
 894
 895         * avr-dis.c: completely rewritten.
 896
 897 2000-06-02  Kazu Hirata  <kazu@hxi.com>
 898
 899         * h8300-dis.c: Follow the GNU coding style.
 900         (bfd_h8_disassemble) Fix a typo.
 901
 902 2000-06-01  Kazu Hirata  <kazu@hxi.com>
 903
 904         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
 905         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
 906         correctly.  Fix a typo.
 907
 908 2000-05-31  Nick Clifton  <nickc@redhat.com>
 909
 910         * opintl.h (_(String)): Explain why dgettext is used instead of
 911         gettext.
 912
 913 2000-05-30  Nick Clifton  <nickc@redhat.com>
 914
 915         * opintl.h (gettext, dgettext, dcgettext, textdomain,
 916         bindtextdomain): Replace defines with those from intl/libgettext.h
 917         to quieten gcc warnings.
 918
 919 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
 920
 921         * Makefile.am: Update dependencies with "make dep-am"
 922         * Makefile.in: Regenerate.
 923
 924 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
 925
 926         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
 927         sign-extending operands.
 928
 929 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
 930
 931         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
 932         except brf's.
 933
 934 2000-05-21  Nick Clifton  <nickc@redhat.com>
 935
 936         * Makefile.am (LIBIBERTY): Define.
 937
 938 2000-05-19 Diego Novillo <dnovillo@redhat.com>
 939
 940         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
 941         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
 942         (reg_names): Rename to std_reg_names. Change it to a char **
 943         static variable.
 944         (std_reg_names): New name for reg_names.
 945         (set_mips_isa_type): Set reg_names to point to std_reg_names by
 946         default.
 947
 948 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
 949
 950         * fr30-desc.h: Partially regenerated to account for changed
 951         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
 952         * m32r-desc.h: Ditto.
 953
 954 2000-05-15  Nick Clifton  <nickc@redhat.com>
 955
 956         * arm-opc.h: Use upper case for flasg in MSR and MRS
 957         instructions.  Allow any bit to be set in the field_mask of
 958         the MSR instruction.
 959
 960         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
 961         field_mask of an MSR instruction.
 962
 963 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
 964
 965         * arm-opc.h: Disassembly of thumb ldsb/ldsh
 966         instructions changed to ldrsb/ldrsh.
 967
 968 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
 969
 970         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
 971         target addresses for 'jal' and 'j'.
 972
 973 2000-05-10  Geoff Keating  <geoffk@redhat.com>
 974
 975         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
 976         also available in common mode when powerpc syntax is being used.
 977
 978 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
 979
 980         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
 981         (dummy_print_address): Ditto.
 982
 983 2000-05-04  Timothy Wall  <twall@redhat.com>
 984
 985         * tic54x-opc.c: New.
 986         * tic54x-dis.c: New.
 987         * disassemble.c (disassembler): Add ARCH_tic54x.
 988         * configure.in: Added tic54x target.
 989         * configure: Ditto.
 990         * Makefile.am: Add tic54x dependencies.
 991         * Makefile.in: Ditto.
 992
 993 2000-05-03  J.T. Conklin  <jtc@redback.com>
 994
 995         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
 996         vector unit operands.
 997         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
 998         unit instruction formats.
 999         (PPCVEC): New macro, mask for vector instructions.
1000         (powerpc_operands): Add table entries for above operand types.
1001         (powerpc_opcodes): Add table entries for vector instructions.
1002
1003         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1004         (print_insn_little_powerpc): Likewise.
1005         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1006
1007 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1008
1009         * configure.in: Add bfd_powerpc_64_arch.
1010         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1011         64 bit code.
1012
1013 2000-04-24  Nick Clifton  <nickc@redhat.com>
1014
1015         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1016         field.
1017
1018 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1019
1020         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1021         FMUL instruction.
1022         (reg_fmul_r): New. Extract source register from FMUL instruction.
1023         (reg_muls_d): New. Extract destination register from MULS instruction.
1024         (reg_muls_r): New. Extract source register from MULS instruction.
1025         (reg_movw_d): New. Extract destination register from MOVW instruction.
1026         (reg_movw_r): New. Extract source register from MOVW instruction.
1027         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1028         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1029
1030 2000-04-22  Timothy Wall  <twall@redhat.com>
1031
1032         * ia64-gen.c (general): Add an ordered table of primary
1033         opcode names, as well as priority fields to disassembly data
1034         structures to enforce a preferred disassembly format based on the
1035         ordering of the opcode tables.
1036         (load_insn_classes): Show a useful message if IC tables are missing.
1037         (load_depfile): Ditto.
1038         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1039         distinguish preferred disassembly.
1040         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1041         format.  Fix incorrect flag on fma.s/fma.s.s0.
1042         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1043         the highest priority.
1044         * ia64-opc-b.c: Use more abbreviations.
1045         * ia64-asmtab.c: Regenerate.
1046
1047 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1048
1049         * hppa-dis.c (extract_16): New function.
1050         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1051         new operand types l,y,&,fe,fE,fx.
1052
1053 2000-04-21  Richard Henderson  <rth@redhat.com>
1054             David Mosberger  <davidm@hpl.hp.com>
1055             Timothy Wall <twall@redhat.com>
1056             Bob Manson  <manson@charmed.cygnus.com>
1057             Jim Wilson  <wilson@redhat.com>
1058
1059         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1060         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1061         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1062         ia64-asmtab.c.
1063         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1064         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1065         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1066         * Makefile.in: Rebuild.
1067         * configure Rebuild.
1068         * configure.in (bfd_ia64_arch): New target.
1069         * disassemble.c (ARCH_ia64): Define.
1070         (disassembler): Support ARCH_ia64.
1071         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1072         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1073         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1074         ia64-war.tbl, ia64-waw.tbl: New files.
1075
1076 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1077
1078         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1079         (disassemble): Use them.
1080
1081 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1082
1083         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1084         * Makefile.am: Update dependencies.
1085         * Makefile.in: Regenerate.
1086
1087 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1088
1089         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1090         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1091         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1092         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1093         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1094         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1095         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1096         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1097         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1098         ansidecl.h as sysdep.h includes it.
1099
1100 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1101
1102         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1103         --enable-build-warnings option.
1104         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1105         * Makefile.in, configure: Re-generate.
1106
1107 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1108
1109         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1110         stc GBR,@-<REG_N> is available for arch_sh1_up.
1111         Group parallel processing insn with identical mnemonics together.
1112         Make three-operand psha / pshl come first.
1113
1114 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1115
1116         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1117         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1118         (sh_arg_type): Add A_PC.
1119         (sh_table): Update entries using immediates.  Add repeat.
1120         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1121         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1122
1123 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1124
1125         * po/opcodes.pot: Regenerate.
1126
1127         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1128         (DEP): Quote when passing vars to sub-make.  Add warning message
1129         to end.
1130         (DEP1): Rewrite for "gcc -MM".
1131         (CLEANFILES): Add DEP2.
1132         Update dependencies.
1133         * Makefile.in: Regenerate.
1134
1135 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1136
1137         * avr-dis.c: Syntax cleanup.
1138         (add0fff): Print the pc relative address as a signed number.
1139         (add03f8): Likewise.
1140
1141 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1142
1143         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1144         the parameter ATTRIBUTE_UNUSED.
1145         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1146
1147 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1148
1149         * m10300-opc.c: SP-based offsets are always unsigned.
1150
1151 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1152
1153         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1154         [branch always] instead of "undefined".
1155
1156 2000-03-27  Nick Clifton  <nickc@redhat.com>
1157
1158         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1159         short instructions, from end of list of long instructions.
1160
1161 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1162
1163         * Makefile.am (CFILES): Add avr-dis.c.
1164         (ALL_MACHINES): Add avr-dis.lo.
1165
1166 2000-03-27  Alan Modra  <alan@linuxcare.com>
1167
1168         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1169         truncate integers.
1170         (print_insn_avr): Call function via pointer in K&R compatible way.
1171         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1172         add0fff, add03f8): Convert to old style function declaration and
1173         add prototype.
1174         (avrdis_opcode): Add prototype.
1175
1176 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1177
1178         * avr-dis.c: New file.  AVR disassembler.
1179         * configure.in (bfd_avr_arch): New architecture support.
1180         * disassemble.c: Likewise.
1181         * configure: Regenerate.
1182
1183 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1184
1185         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1186
1187 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1188
1189         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1190         flag to determine if operand is pc-relative.
1191         * d30v-opc.c:
1192         (d30v_format_table):
1193         (REL6S3): Renamed from IMM6S3.
1194         Added flag OPERAND_PCREL.
1195         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1196         added flag OPERAND_PCREL.
1197         (IMM12S3U): Replaced with REL12S3.
1198         (SHORT_D2, LONG_D): Delay target is pc-relative.
1199         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1200         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1201         using the REL* operands.
1202         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1203         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1204         LONG_Db, using REL* operands.
1205         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1206         (d30v_opcode_table): Use new *r formats.
1207
1208 2000-02-28  Nick Clifton  <nickc@redhat.com>
1209
1210         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1211         'signed_overflow_ok_p'.
1212
1213 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1214
1215         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1216         name of the libtool directory.
1217         * Makefile.in: Rebuild.
1218
1219 2000-02-24  Nick Clifton  <nickc@redhat.com>
1220
1221         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1222         (cgen_clear_signed_overflow_ok): New function.
1223         (cgen_signed_overflow_ok_p): New function.
1224
1225 2000-02-23  Andrew Haley  <aph@redhat.com>
1226
1227         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1228         m32r-ibld.c, m32r-opc.h: Rebuild.
1229
1230 2000-02-23  Linas Vepstas <linas@linas.org>
1231
1232         * i370-dis.c, i370-opc.c: New.
1233
1234         * disassemble.c (ARCH_i370): Define.
1235         (disassembler): Handle it.
1236
1237         * Makefile.am: Add support for Linux/IBM 370.
1238         * configure.in: Likewise.
1239
1240         * Makefile.in: Regenerate.
1241         * configure: Likewise.
1242
1243 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1244
1245         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1246         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1247         procedure.
1248
1249 2000-02-22  Andrew Haley  <aph@redhat.com>
1250
1251         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1252         force gp32 to zero.
1253         * mips-opc.c (G6): New define.
1254         (mips_builtin_op): Add "move" definition for -gp32.
1255
1256 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1257
1258         From Grant Erickson <gerickso@Brocade.COM>:
1259         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1260
1261 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1262
1263         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1264         vars to unsigned.
1265
1266 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1267
1268         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1269         (print_insn_ppi): Likewise.
1270         (print_insn_shx): Use info->mach to select appropriate insn set.
1271         Add support for sh-dsp.  Remove FD_REG_N support.
1272         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1273         (sh_arg_type): Likewise.  Remove FD_REG_N.
1274         (sh_dsp_reg_nums): New enum.
1275         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1276         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1277         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1278         (arch_sh3_dsp_up): Likewise.
1279         (sh_opcode_info): New field: arch.
1280         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1281         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1282
1283 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1284
1285         * arm-dis.c: Change flavor name from atpcs-special to
1286         special-atpcs to prevent name conflict in gdb.
1287         (get_arm_regname_num_options, set_arm_regname_option,
1288         get_arm_regnames): New functions.  API to access the several
1289         flavor of register names.  Note: Used by gdb.
1290         (print_insn_thumb): Use the register name entry from the currently
1291         selected flavor for LR and PC.
1292
1293 2000-02-10  Nick Clifton  <nickc@redhat.com>
1294
1295         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1296         classes.
1297         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1298         "mulsh.h" instructions.
1299         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1300         classes.
1301         (print_insn_mcore): Add support for little endian targets.
1302         Add support for MULSH and OPSR classes.
1303
1304 2000-02-07  Nick Clifton  <nickc@redhat.com>
1305
1306         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1307         Previous delat did not take.
1308
1309 2000-02-03  Timothy Wall  <twall@redhat.com>
1310
1311         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1312         to adjust target address bounds checking and calculate the
1313         appropriate octet offset into data.
1314
1315 2000-01-27  Nick Clifton  <nickc@redhat.com>
1316
1317         * arm-dis.c: (parse_disassembler_option): Rename to
1318         parse_arm_disassembler_option and allow to be exported.
1319
1320         * disassemble.c (disassembler_usage): New function: Print out any
1321         target specific disassembler options.
1322         Call arm_disassembler_options() if the ARM architecture is being
1323         supported.
1324
1325         * arm-dis.c (NUM_ELEM): Define this macro if not already
1326         defined.
1327         (arm_regname): New struct type for ARM register names.
1328         (arm_toggle_regnames): Delete.
1329         (parse_disassembler_option): Use register name structure.
1330         (print_insn): New function: Combines duplicate code found in
1331         print_insn_big_arm and print_insn_little_arm.
1332         (print_insn_big_arm): Call print_insn.
1333         (print_insn_little_arm): Call print_insn.
1334         (print_arm_disassembler_options): Display list of supported,
1335         ARM specific disassembler options.
1336
1337 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
1338
1339         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1340         ARM_STT_16BIT flag as Thumb code symbols.
1341
1342         * arm-dis.c (printf_insn_little_arm): Ditto.
1343
1344 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
1345
1346         * arm-dis.c (printf_insn_thumb): Prevent double dumping
1347         of raw thumb instructions.
1348
1349 2000-01-20  Nick Clifton  <nickc@redhat.com>
1350
1351         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1352
1353 2000-01-03  Nick Clifton  <nickc@cygnus.com>
1354
1355         * arm-dis.c (streq): New macro.
1356         (strneq): New macro.
1357         (force_thumb): ew local variable.
1358         (parse_disassembler_option): New function: Parse a single, ARM
1359         specific disassembler command line switch.
1360         (parse_disassembler_option): Call parse_disassembler_option to
1361         parse individual command line switches.
1362         (print_insn_big_arm): Check force_thumb.
1363         (print_insn_little_arm): Check force_thumb.
1364
1365 For older changes see ChangeLog-9899
1366 \f
1367 Local Variables:
1368 mode: change-log
1369 left-margin: 8
1370 fill-column: 74
1371 version-control: never
1372 End: