1 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
3 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
5 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
7 * cgen-opc.c: #include <ctype.h>.
8 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
9 Handle case insensitive hashing.
10 (hash_keyword_value): Change type of `value' to unsigned int.
12 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
14 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
15 precision FP, mark it as such. Likewise for double precision
16 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
19 (mips_builtin_opcodes): Remove non-existant r5900 instructions
23 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
25 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
26 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
29 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
31 * ppc-opc.c (extract_nsi): make unsigned expression signed before
33 (UNUSED): remove one level of parens, so MSVC doesn't choke on
34 nesting depth when all the macros are expanded.
36 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
38 * sparc-opc.c: The fcmp v9a instructions take an integer register
39 as a destination, not a floating point register. From Christian
40 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
42 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
44 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
45 syntax. From Roman Hodek
46 <rnhodek@faui22c.informatik.uni-erlangen.de>.
48 * i386-dis.c (twobyte_has_modrm): Fix pand.
50 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
52 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
54 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
56 * arm-dis.c: Add prototypes for arm_decode_shift and
59 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
61 * mips-opc.c: Add r3900 insns.
63 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
65 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
66 print delay slot instructions on the same line. When using a PC
67 relative load, add a comment with the value being loaded if it can
70 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
72 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
73 to pushS/popS for segment regs and byte constant so that
74 pushw/popw printed when in 16 bit data mode.
76 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
77 print cbtw, cwtd in 16 bit data mode.
78 * i386-dis.c (putop): extra case W to support above.
80 * i386-dis.c (print_insn_x86): print addr32 prefix when given
81 address size prefix in 16 bit address mode.
83 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
85 * sh-dis.c: Reindent. Rename local variable fprintf to
88 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
90 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
92 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
94 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
96 * mips16-opc.c (mip16_opcodes): same.
98 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
100 * m68k-opc.c (moveb): Change $d to %d.
102 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
104 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
105 (twobyte_has_modrm): Likewise.
107 (OP_MMX, OP_EM, OP_MS): New static functions.
109 * i386-dis.c: Revert patch of April 4. The output now matches
112 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
114 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
117 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
119 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
121 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
123 * Makefile.in (install): Depend upon installdirs.
124 (installdirs): New target.
126 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
128 From Thomas Graichen <graichen@rzpd.de>:
129 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
130 * configure: Rebuild.
132 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
134 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
135 Delete string{,s}.h support.
137 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
139 * cgen-asm.c (cgen_parse_operand_fn): New global.
140 (cgen_parse_{{,un}signed_integer,address}): Update call to
141 cgen_parse_operand_fn.
142 (cgen_init_parse_operand): New function.
143 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
144 from cgen_asm_init_parse.
145 (m32r_cgen_assemble_insn): New operand `errmsg'.
146 Delete call to as_bad, return error message to caller.
147 (m32r_cgen_asm_hash_keywords): #if 0 out.
149 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
151 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
153 [case 'J']: Fix typo in register name.
155 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
157 * configure.in: Substitute SHLIB_LIBS.
158 * configure: Rebuild.
159 * Makefile.in (SHLIB_LIBS): New variable.
160 ($(SHLIB)): Use $(SHLIB_LIBS).
162 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
164 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
166 * cgen-opc.c (hash_keyword_name): Improve algorithm.
168 * disassemble.c (disassembler): Handle m32r.
170 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
172 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
173 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
174 * Makefile.in (CFILES): Add them.
175 (ALL_MACHINES): Add them.
176 (dependencies): Regenerate.
177 * configure.in (cgen_files): New variable.
178 (bfd_m32r_arch): Add entry.
179 * configure: Regenerate.
181 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
183 * configure.in: Correct file names for bfd_mn10[23]00_arch.
184 * configure: Rebuild.
186 * Makefile.in: Rebuild dependencies.
188 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
190 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
193 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
195 * Branched binutils 2.8.
197 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
199 * m10200-dis.c: Rename from mn10200-dis.c.
200 * m10200-opc.c: Rename from mn10200-opc.c.
201 * m10300-dis.c: Rename from mn10300-dis.c
202 * m10300-opc.c: Rename from mn10300-opc.c.
203 * Makefile.in: Update accordingly.
205 * mips16-opc.c: Add mul and dmul macros.
207 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
209 * makefile.vms: Update CFLAGS, add clean target.
211 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
213 * mips-opc.c: Add "wait". From Ralf Baechle
214 <ralf@gnu.ai.mit.edu>.
216 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
217 * configure, config.in: Rebuild.
218 * sysdep.h: Include <stdlib.h> if it exists.
219 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
221 * Makefile.in: Rebuild dependencies.
223 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
225 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
226 Andrew Bray <andy@madhouse.demon.co.uk>.
228 * mips-opc.c: Add cast when setting mips_opcodes.
231 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
233 * v850-dis.c (disassemble): Fix sign extension problem.
234 * v850-opc.c (extract_d*): Fix sign extension problems to make
235 disassembly calculate branch offsets correctly.
238 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
240 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
242 * mips-opc.c: Add dctr and dctw.
245 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
247 * d30v-dis.c (print_insn): Change the way signed constants
250 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
252 * Makefile.in (BFD_H): New variable.
253 (HFILES): New variable.
254 (CFILES): Add all C files.
255 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
256 Delete old dependencies, and build new ones.
257 * dep-in.sed: New file.
259 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
261 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
263 start-sanitize-coldfire
264 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
266 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
269 end-sanitize-coldfire
270 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
272 * mn10200-opc.c: Change "trap" to "syscall".
273 * mn10300-opc.c: Add new "syscall" instruction.
275 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
277 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
278 mulul insns on the coldfire.
280 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
282 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
283 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
284 (print_insn_little_arm): Likewise.
286 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
288 Based on patches from H.J. Lu <hjl@lucon.org>:
289 * i386-dis.c (fetch_data): Add prototype.
290 * m68k-dis.c (fetch_data): Add prototype.
291 (dummy_print_address): Add prototype. Make static.
292 * ppc-opc.c (valid_bo): Add prototype.
293 * sparc-dis.c (build_hash_table): Add prototype.
294 (is_delayed_branch, compute_arch_mask): Add prototypes.
295 (print_insn_sparc): Make several local variables const.
296 (compare_opcodes): Change arguments to const PTR. Add prototype.
297 * sparc-opc.c (arg): Change name field to be const.
298 (lookup_name, lookup_value): Add prototypes. Change table and
299 name parameters to be const.
300 (sparc_encode_asi): Change name parameter to be const.
301 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
302 (sparc_encode_sparclet_cpreg): Likewise.
303 (sparc_decode_asi): Change return type to be const.
304 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
305 (sparc_decode_sparclet_cpreg): Likewise.
307 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
309 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
310 Solaris doesn't like the combined options, and the -f is
312 (stamp-tshlink, install): Likewise.
314 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
316 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
319 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
321 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
323 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
325 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
328 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
330 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
333 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
335 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
337 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
339 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
342 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
344 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
345 floatformat_to_double to make portable.
346 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
349 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
351 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
352 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
354 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
356 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
357 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
360 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
362 * tic80-opc.c (LSI_SCALED): Renamed from this ...
363 (OFF_SL_BR_SCALED): ... to this, and added the flag
364 TIC80_OPERAND_BASEREL to the flags word.
365 (tic80_opcodes): Replace all occurances of LSI_SCALED with
369 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
371 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
372 Change mips_opcodes from const array to a pointer,
373 and change bfd_mips_num_opcodes from const int to int,
374 so that we can increase the size of the mips opcodes table
378 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
380 * tic80-opc.c (tic80_predefined_symbols): Revert change to
381 store BITNUM values in the table in one's complement form
382 to match behavior when assembler is given a raw numeric
383 value for a BITNUM operand.
384 * tic80-dis.c (print_operand_bitnum): Ditto.
388 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
390 * d30v-opc.c: Removed references to FLAG_X.
393 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
395 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
398 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
400 * Makefile.in: Added d30v object files.
401 * configure: (bfd_d30v_arch) Rebuilt.
402 * configure.in: (bfd_d30v_arch) Added new case.
403 * d30v-dis.c: New file.
404 * d30v-opc.c: New file.
405 * disassemble.c (disassembler) Add entry for d30v.
409 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
411 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
412 representations for the floating point BITNUM values.
414 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
416 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
417 in the table in one's complement form, as they appear in the
419 (tic80_symbol_to_value): Use macros to access predefined
421 (tic80_value_to_symbol): Ditto.
422 (tic80_next_predefined_symbol): New function.
423 * tic80-dis.c (print_operand_bitnum): Remove code that did
424 one's complement for BITNUM values.
428 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
430 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
433 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
435 * makefile.vms: Remove 8 bit characters. Update to latest
438 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
440 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
442 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
444 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
445 (IMM24_PCREL): Likewise.
447 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
449 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
450 address for an extended PC relative instruction that is not a
453 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
455 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
459 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
461 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
462 (tic80_opcodes): Sort entries so that long immediate forms
463 come after short immediate forms, making it easier for
464 assembler to select the right one for a given operand.
467 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
469 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
471 (print_insn_mips16): Likewise.
474 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
476 * mips-opc.c: add r5900.
480 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
482 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
483 a symbol class that restricts translation to just that
484 class (general register, condition code, etc).
486 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
488 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
489 and REG_DEST_E for register operands that have to be
490 an even numbered register. Add REG_FPA for operands that
491 are one of the floating point accumulator registers.
492 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
493 (tic80_opcodes): Change entries that need even numbered
494 register operands to use the new operand table entries.
495 Add "or" entries that are identical to "or.tt" entries.
498 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
500 * mips16-opc.c: Add new cases of exit instruction for
502 * mips-dis.c (print_mips16_insn_arg): Display floating point
503 registers in operands of exit instruction. Print `$' before
504 register names in operands of entry and exit instructions.
507 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
509 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
510 pairs for all predefined symbols recognized by the assembler.
511 Also used by the disassembling routines.
512 (tic80_symbol_to_value): New function.
513 (tic80_value_to_symbol): New function.
514 * tic80-dis.c (print_operand_control_register,
515 print_operand_condition_code, print_operand_bitnum):
516 Remove private tables and use tic80_value_to_symbol function.
519 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
521 * d10v-dis.c (print_operand): Change address printing
522 to correctly handle PC wrapping. Fixes PR11490.
524 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
526 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
529 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
531 * mips-dis.c (print_insn_mips16): Set insn_info information.
532 (print_mips16_insn_arg): Likewise.
534 * mips-dis.c (print_insn_mips16): Better handling of an extend
535 opcode followed by an instruction which can not be extended.
537 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
539 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
540 coldfire moveb instruction to not allow an address register as
541 destination. Although the documentation does not indicate that
542 this is invalid, experiments uncovered unexpected behavior.
543 Added a comment explaining the situation. Thanks to Andreas
544 Schwab for pointing this out to me.
547 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
549 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
550 entries are presorted so that entries with the same mnemonic are
551 adjacent to each other in the table. Sort the entries for each
552 instruction so that this is true.
555 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
557 * m68k-dis.c: Include <libiberty.h>.
558 (print_insn_m68k): Sort the opcode table on the most significant
559 nibble of the opcode.
562 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
564 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
565 "vsub", "vst", "xnor", and "xor" instructions.
566 (V_a1): Renamed from V_a, msb of accumulator reg number.
567 (V_a0): Add macro, lsb of accumulator reg number.
569 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
571 * tic80-dis.c (print_insn_tic80): Broke excessively long
572 function up into several smaller ones and arranged for
573 the instruction printing function to be callable recursively
574 to print vector instructions that have both a load and a
575 math instruction packed into a single opcode.
576 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
577 to explain why it comes after the other vector opcodes.
580 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
582 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
583 move insns to handle immediate operands.
585 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
587 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
588 fix operand mask in the "moveml" entries for the coldfire.
591 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
593 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
594 New macros for building vector instruction opcodes.
595 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
596 FMT_LI, which were unused. The field is now a flags field.
597 Remove some opcodes that are possible, but illegal, such
598 as long immediate instructions with doubles for immediate
599 values. Add "vadd" and "vld" instructions.
601 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
603 * tic80-opc.c (tic80_operands): Reorder some table entries to make
604 the order more logical. Move the shift alias instructions ("rotl",
605 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
606 interspersed with the regular sr.x and sl.x instructions. Add
607 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
608 "sub", "subu", "swcr", and "trap".
610 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
612 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
613 (OFF_SL_PC): Renamed from OFF_SL.
614 (OFF_SS_BR): New operand type for base relative operand.
615 (OFF_SL_BR): New operand type for base relative operand.
616 (REG_BASE): New operand type for base register operand.
617 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
618 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
619 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
621 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
622 10 char field, padded with spaces on rhs, rather than a string
623 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
624 than old TIC80_OPERAND_RELATIVE. Add support for new
625 TIC80_OPERAND_BASEREL flag bit.
627 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
629 * tic80-dis.c (print_insn_tic80): Print floating point operands
631 * tic80-opc.c (SPFI): Add single precision floating point
632 immediate operand type.
633 (ROTATE): Add rotate operand type for shifts.
634 (ENDMASK): Add for shifts.
635 (n): Macro for the 'n' bit.
636 (i): Macro for the 'i' bit.
637 (PD): Macro for the 'PD' field.
638 (P2): Macro for the 'P2' field.
639 (P1): Macro for the 'P1' field.
640 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
644 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
646 * mn10200-dis.c (disassemble): Mask off unwanted bits after
647 adding in current address for pc-relative operands.
650 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
652 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
653 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
654 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
655 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
656 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
657 REG_BASE_M_SI, REG_BASE_M_LI respectively.
658 (REG_SCALED, LSI_SCALED): New operand types.
659 (E): New macro for 'E' bit at bit 27.
660 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
661 opcodes, including the various size flavors (b,h,w,d) for
662 the direct load and store instructions.
664 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
666 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
668 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
669 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
670 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
671 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
672 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
673 masks with "MASK_* & ~M_*" to get the M bit reset.
674 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
676 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
678 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
679 correctly. Add support for printing TIC80_OPERAND_BITNUM and
680 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
682 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
683 CC, SICR, and LICR table entries.
684 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
685 "bcnd", and "brcr" opcodes.
688 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
690 * ppc-opc.c (powerpc_operands): Make comment match the
691 actual fields (no shift field).
692 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
694 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
695 partial implementation, work in progress.
696 * tic80-opc.c (tic80_operands): Begin construction operands table.
697 (tic80_opcodes): Continue populating opcodes table and start
698 filling in the operand indices.
699 (tic80_num_opcodes): Add this.
702 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
704 * m68k-opc.c: Add #B case for moveq.
706 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
708 * mn10300-dis.c (disassemble): Make sure all variables are initialized
709 before they are used.
712 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
714 * v850-opc.c (v850_opcodes): Put curly-braces around operands
715 for "breakpoint" instruction.
718 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
720 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
721 (dep): Use ALL_CFLAGS rather than CFLAGS.
724 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
726 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
730 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
732 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
734 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
737 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
739 * mips16-opc.c: Add "abs".
742 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
744 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
745 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
746 (disassembler): Add bfd_arch_tic80 support to set disassemble
748 * tic80-dis.c (print_insn_tic80): Add stub.
750 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
752 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
753 * configure: Regenerate with autoconf.
754 * tic80-dis.c: Add file.
755 * tic80-opc.c: Add file.
758 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
760 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
762 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
764 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
765 (mn10200_opcodes): Use it for some logicals and btst insns.
766 Add "break" and "trap" instructions.
768 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
770 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
772 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
774 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
775 relative load or add now depends upon whether the instruction is
778 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
780 * mn10200-dis.c: Finish writing disassembler.
781 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
782 Fix mask for "jmp (an)".
784 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
785 handle endianness issues for mn10300.
787 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
789 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
791 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
792 instruction. Fix opcode field for "movb (imm24),dn".
794 * mn10200-opc.c (mn10200_operands): Fix insertion position
797 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
799 * mn10200-opc.c: Create mn10200 opcode table.
800 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
801 but moving along nicely.
803 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
805 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
807 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
809 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
810 specifiers for fmovem* instructions.
812 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
814 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
816 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
818 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
821 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
823 * mn10300-opc.c: Add some comments explaining the various
826 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
828 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
830 * m68k-dis.c (print_insn_arg): Handle new < and > operand
833 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
834 operand specifiers in fmovm* instructions.
836 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
838 * ppc-opc.c (insert_li): Give an error if the offset has the two
839 least significant bits set.
841 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
843 * mips-dis.c (print_insn_mips16): Separate the instruction from
844 the arguments with a tab, not a space.
846 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
848 * mn10300-dis.c (disasemble): Finish conversion to '$' as
851 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
854 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
856 * configure: Rebuild with autoconf 2.12.
858 Add support for mips16 (16 bit MIPS implementation):
859 * mips16-opc.c: New file.
860 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
861 (mips16_reg_names): New static array.
862 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
863 after seeing a 16 bit symbol.
864 (print_insn_little_mips): Likewise.
865 (print_insn_mips16): New static function.
866 (print_mips16_insn_arg): New static function.
867 * mips-opc.c: Add jalx instruction.
868 * Makefile.in (mips16-opc.o): New target.
869 * configure.in: Use mips16-opc.o for bfd_mips_arch.
870 * configure: Rebuild.
872 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
874 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
875 operand specifiers in *save, *restore and movem* instructions.
877 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
880 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
881 register operands for immediate arithmetic, not, neg, negx, and
882 set according to condition instructions.
884 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
885 specifier of the effective-address operand in immediate forms of
886 arithmetic instructions. The specifier for the immediate operand
887 notes how and where the constant will be stored.
889 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
891 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
894 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
897 * mn10300-dis.c (disassemble): Prefix registers with '%'.
899 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
901 * mn10300-dis.c (disassemble): Handle register lists.
903 * mn10300-opc.c: Fix handling of register list operand for
904 "call", "ret", and "rets" instructions.
906 * mn10300-dis.c (disassemble): Print PC-relative and memory
907 addresses symbolically if possible.
908 * mn10300-opc.c: Distinguish between absolute memory addresses,
909 pc-relative offsets & random immediates.
911 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
913 (disassemble): Handle SPLIT and EXTENDED operands.
915 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
917 * mn10300-dis.c: Rough cut at printing some operands.
919 * mn10300-dis.c: Start working on disassembler support.
920 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
922 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
924 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
926 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
928 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
930 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
932 * mn10300-opc.c (mn10300_opcodes): Demand parens around
933 register argument is calls and jmp instructions.
935 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
937 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
938 getx operand. Fix opcode for mulqu imm,dn.
940 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
942 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
943 in MN10300_OPERAND_SPLIT operands for how many bits
944 appear in the basic insn word. Add IMM32_HIGH24,
945 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
946 (mn10300_opcodes): Use new operands as needed.
948 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
949 for bset, bclr, btst instructions.
950 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
952 * mn10300-opc.c (mn10300_operands): Remove many redundant
953 operands. Update opcode table as appropriate.
954 (IMM32): Add MN10300_OPERAND_SPLIT flag.
955 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
957 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
959 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
960 operands (for indexed load/stores). Fix bitpos for DI
961 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
962 few instructions that insert immediates/displacements in the
963 middle of the instruction. Add IMM8E for 8 bit immediate in
964 the extended part of an instruction.
965 (mn10300_operands): Use new opcodes as appropriate.
967 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
969 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
970 sequential so the assembler never parallelizes it with
973 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
975 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
976 a data/address register that appears in register field 0
977 and register field 1.
978 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
980 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
982 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
983 standard disassembly.
985 * alpha-opc.c (alpha_operands): Rearrange flags slot.
986 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
987 Recategorize PALcode instructions.
990 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
992 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
995 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
997 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
998 there are no operand types.
1001 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1003 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1005 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1008 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1010 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1013 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1015 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1016 and sst.w instructions.
1018 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1022 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1024 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1027 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1029 * ppc-opc.c (PPCPWR2): Define.
1030 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1033 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1035 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1036 field for movhu instruction.
1039 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1040 cast value to "long" not "signed long" to keep hpux10
1044 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1046 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1049 * mn10300-opc.c (FMT*): Remove definitions.
1051 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1052 for shift-by-register opcodes.
1054 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1055 into [AD][MN][01] for encoding the position of the register
1058 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1060 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1061 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1063 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1065 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1066 Fix various typos. Add "PAREN" operand.
1067 (MEM, MEM2): Define.
1068 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1069 operands. Fix several typos.
1071 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1074 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1076 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1077 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1079 (mn10300_opcodes): Break opcode format out into its own field.
1080 Update many operand fields to deal with signed vs unsigned
1081 issues. Fix one or two typos in the "mov" instruction
1082 opcode, mask and/or operand fields.
1084 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1086 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1087 m68851 wasn't reset.
1089 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1091 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1092 all opcodes. Very rough cut at operands for all opcodes.
1094 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1097 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1099 * mn10200-opc.c, mn10300-opc.c: New files.
1100 * mn10200-dis.c, mn10300-dis.c: New files.
1101 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1102 * disassemble.c: Break mn10x00 support into 10200 and 10300
1104 * configure.in: Likewise.
1105 * configure: Rebuilt.
1107 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1109 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1111 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1113 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1115 * disassemble (ARCH_mn10x00): Define.
1116 (disassembler): Handle bfd_arch_mn10x00.
1117 * configure.in: Recognize bfd_mn10x00_arch.
1118 * configure: Rebuilt.
1120 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1122 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1123 accordingly. Don't declare functions using op_rtn.
1126 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1128 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1129 params to be more standard.
1130 * (disassemble): Print absolute addresses and symbolic names for
1131 branch and jump targets.
1132 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1134 * (v850_opcodes): Add breakpoint insn.
1137 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1139 * m68k-opc.c: Move the fmovemx data register cases before the
1140 other cases, so that they get recognized before the data register
1141 does gets treated as a degenerate register list.
1143 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1145 * mips-opc.c: Add a case for "div" and "divu" with two registers
1146 and a destination of $0.
1148 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1150 * mips-dis.c (print_insn_arg): Add prototype.
1151 (_print_insn_mips): Ditto.
1153 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1155 * mips-dis.c (print_insn_arg): Print condition code registers as
1158 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1160 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1163 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1165 * v850-dis.c (disassemble): Make static. Provide prototype.
1167 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1169 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1172 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1174 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1175 ']' characters into the output stream.
1176 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1177 Add "memop" field to all opcodes (for the disassembler).
1178 Reorder opcodes so that "nop" comes before "mov" and "jr"
1179 comes before "jarl".
1181 * v850-dis.c (print_insn_v850): Fix typo in last change.
1183 * v850-dis.c (print_insn_v850): Properly handle disassembling
1184 a two byte insn at the end of a memory region when the memory
1185 region's size is only two byte aligned.
1187 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1189 * v850-dis.c (v850_reg_names): Define.
1190 (v850_sreg_names, v850_cc_names): Likewise.
1191 (disassemble): Very rough cut at printing operands (unformatted).
1193 * v850-opc.c (BOP_MASK): Fix.
1194 (v850_opcodes): Fix mask for jarl and jr.
1196 * v850-dis.c: New file. Skeleton for disassembler support.
1197 * Makefile.in Remove v850 references, they're not needed here
1198 and they weren't being sanitized away.
1199 * configure.in: Add v850-dis.o when building v850 toolchains.
1200 * configure: Rebuilt.
1201 * disassemble.c (disassembler): Call v850 disassembler.
1203 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1204 (insert_d8_6, extract_d8_6): New functions.
1205 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1206 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1208 (IF4A, IF4B): Use "D7" instead of "D7S".
1209 (IF4C, IF4D): Use "D8_7" instead of "D8".
1210 (IF4E, IF4F): New. Use "D8_6".
1211 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1212 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1214 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1215 (v850_operands): Change D16 to D16_15, use special insert/extract
1216 routines. New new D16 that uses the generic insert/extract code.
1217 (IF7A, IF7B): Use D16_15.
1218 (IF7C, IF7D): New. Use D16.
1219 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1221 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1222 message. Issue an error if the branch offset is odd.
1224 * v850-opc.c: Add notes about needing special insert/extract
1225 for all the load/store insns, except "ld.b" and "st.b".
1227 * v850-opc.c (insert_d22, extract_d22): New functions.
1228 (v850_operands): Use insert_d22 and extract_d22 for
1230 (insert_d9): Fix range check.
1232 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1234 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1235 and set bits field to D9 and D22 operands.
1237 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1239 * v850-opc.c (v850_operands): Define SR2 operand.
1240 (v850_opcodes): "ldsr" uses R1,SR2.
1242 * v850-opc.c (v850_opcodes): Fix opcode specs for
1243 sld.w, sst.b, sst.h, sst.w, and nop.
1245 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1247 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1248 end of the opcode table.
1251 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1253 * d10v-opc.c (pre_defined_registers): Added register pairs,
1254 "r0-r1", "r2-r3", etc.
1257 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1259 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1260 Create I16U for an unsigned 16bit mmediate operand.
1261 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1263 * v850-opc.c (v850_operands): Define EP operand.
1264 (IF4A, IF4B, IF4C, IF4D): Use EP.
1266 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1267 with immediate operand, "movhi". Tweak "ldsr".
1269 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1270 correct. Get sld.[bhw] and sst.[bhw] closer.
1272 * v850-opc.c (v850_operands): "not" is a two byte insn
1274 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1276 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1278 * v850-opc.c (two): Get order of words correct.
1280 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1282 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1283 register source and destination operands.
1284 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1286 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1287 same thinko in "trap" opcode.
1289 * v850-opc.c (v850_opcodes): Add initializer for size field
1292 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1293 Add D8 for 8-bit unsigned field in short load/store insns.
1294 (IF4A, IF4D): These both need two registers.
1295 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1296 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1297 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1298 for "ldsr" and "stsr".
1299 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1302 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1303 short store word (sst.w).
1305 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1307 * v850-opc.c (v850_operands): Added insert and extract fields,
1308 pointers to functions that handle unusual operand encodings.
1310 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1312 * v850-opc.c (v850_opcodes): Enable "trap".
1314 * v850-opc.c (v850_opcodes): Fix order of displacement
1315 and register for "set1", "clr1", "not1", and "tst1".
1317 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1319 * v850-opc.c (v850_operands): Add "B3" support.
1320 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1323 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1325 * v850-opc.c: Close unterminated comment.
1327 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1329 * v850-opc.c (v850_operands): Add flags field.
1330 (v850_opcodes): add move opcodes.
1332 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1334 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1335 * configure: (bfd_v850v_arch) Add new case.
1336 * configure.in: (bfd_v850_arch) Add new case.
1337 * v850-opc.c: New file.
1340 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1342 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1344 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1346 * d10v-opc.c: Add additional information to the opcode
1347 table to help determinine which instructions can be done
1350 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1352 * mpw-make.sed: Update editing of include pathnames to be
1355 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1357 * arm-opc.h: Added "bx" instruction definition.
1359 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1361 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1363 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1365 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1367 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1369 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1371 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1373 * makefile.vms: Update for alpha-opc changes.
1375 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1377 * i386-dis.c (print_insn_i386): Actually return the correct value.
1378 (ONE, OP_ONE): #ifdef out; not used.
1380 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1382 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1383 Changed subi operand type to treat 0 as 16.
1385 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1387 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1390 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1392 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1393 memory transfer instructions. Add new format string entries %h and %s.
1394 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1397 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1399 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1400 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1402 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1404 * alpha-dis.c (print_insn_alpha_osf): Remove.
1405 (print_insn_alpha_vms): Remove.
1406 (print_insn_alpha): Make globally visible. Chose the register
1407 names based on info->flavour.
1408 * disassemble.c: Always return print_insn_alpha for the alpha.
1410 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1412 * d10v-dis.c (dis_long): Handle unknown opcodes.
1414 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1416 * d10v-opc.c: Changes to support signed and unsigned numbers.
1417 All instructions with the same name that have long and short forms
1418 now end in ".l" or ".s". Divs added.
1419 * d10v-dis.c: Changes to support signed and unsigned numbers.
1421 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1423 * d10v-dis.c: Change all functions to use info->print_address_func.
1425 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1427 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1428 move ccr/sr insns more strict so that the disassembler only
1429 selects them when the addressing mode is data register.
1431 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1432 * d10v-opc.c (pre_defined_registers): Declare.
1433 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1434 to pick a better name for the registers.
1436 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1438 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1439 operands for fexpand and fpmerge. From Christian Kuehnke
1440 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1442 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1444 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1445 print routine. Take new regnames and cpumask arguments.
1446 Kill the environment variable nonsense.
1447 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1448 (print_insn_alpha_vms): New function. Do VMS style regnames.
1449 * disassemble.c (disassembler): Test bfd flavour to pick
1450 between OSF and VMS routines. Default to OSF.
1452 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1454 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1455 * configure: Rebuild.
1456 * Makefile.in (install): Use @INSTALL_SHLIB@.
1458 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1460 * configure: (bfd_d10v_arch) Add new case.
1461 * configure.in: (bfd_d10v_arch) Add new case.
1462 * d10v-dis.c: New file.
1463 * d10v-opc.c: New file.
1464 * disassemble.c (disassembler) Add entry for d10v.
1466 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1468 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1469 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1471 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1473 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1474 distinguish between variants of the instruction set.
1475 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1476 distinguish between variants of the instruction set.
1478 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1480 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1481 the 8086 instruction set.
1482 * i386-dis.c: General cleanups. Make most things static. Add
1483 prototypes. Get rid of static variables aflags and dflags. Pass
1484 them as args (to almost everything).
1486 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1488 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1490 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1492 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1493 if the next arg is marked with SRC_IN_DST. Gross.
1495 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1496 we're looking for and find EXR.
1498 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1499 if we're looking for KBIT and we don't find it.
1501 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1504 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1505 3bit immediate operands.
1507 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1509 * Released binutils 2.7.
1511 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1512 <kkaempf@progis.ac-net.de>.
1514 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1516 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1518 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1520 * sparc-dis.c (print_insn_sparclite): New routine to print
1521 sparclite instructions.
1523 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1525 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1527 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1529 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1530 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1531 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1533 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1535 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1536 Use autoconf-set values.
1537 (docdir, oldincludedir): Removed.
1538 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1540 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1542 * alpha-opc.c: New file.
1543 * alpha-opc.h: Remove.
1544 * alpha-dis.c: Complete rewrite to use new opcode table.
1545 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1546 * configure: Rebuild with autoconf 2.10.
1547 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1548 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1550 (alpha-opc.o): New target.
1552 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1554 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1555 Set imm_added_to_rs1 even if the source and destination register
1558 * sparc-opc.c: Add some two operand forms of the wr instruction.
1560 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1562 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1565 * disassemble.c (disassembler): Handle H8/S.
1566 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1568 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1570 * sparc-opc.c: Add beq/teq as aliases for be/te.
1572 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1573 <sergei@msil.sps.mot.com>.
1575 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1577 * makefile.vms: New file.
1579 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1581 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1583 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1586 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1588 * i386-dis.c (OP_OFF): Call append_prefix.
1590 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1592 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1593 unsigned long to silence a warning from the Solaris PowerPC
1596 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1598 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1600 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1602 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1604 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1605 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1606 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1607 cpush, cpusha, cpull sparclet insns.
1609 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1611 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1613 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1615 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1616 Set F_FLOAT on other floating point instructions.
1618 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1620 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1622 (powerpc_opcodes): Add 860/821 specific SPRs.
1624 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1626 * configure.in: Permit --enable-shared to specify a list of
1627 directories. Set and substitute BFD_PICLIST.
1628 * configure: Rebuild.
1629 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1630 uses. Set to @BFD_PICLIST@.
1632 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1634 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1635 not "abs", which may be needed for the absolute in something
1636 like btst #0,@10:8. Print L_3 immediates separately from other
1637 immediates. Change ABSMOV reference to ABS8MEM.
1639 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1641 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1642 (current_arch_mask): New static global.
1643 (compute_arch_mask): New static function.
1644 (print_insn_sparc): Delete sparc_v9_p. New static local
1645 current_mach. Resort opcode table if current_mach changes.
1646 Generalize "insn not supported" test.
1647 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1648 Delete test for v9/!v9.
1649 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1651 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1652 (brfcx): Renamed to FBRX.
1653 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1654 coprocessor mnemonics are not supported on the sparclet).
1655 (condf): Renamed to CONDF.
1656 (SLCBCC2): Delete F_ALIAS flag.
1658 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1660 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1661 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1663 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1665 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1666 that the shared library version number is set correctly.
1668 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1670 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1671 Miles Bader <miles@gnu.ai.mit.edu>.
1672 * configure: Rebuild.
1674 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1676 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1679 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1681 * configure: Rebuild with autoconf 2.8.
1683 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1685 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1686 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1688 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1690 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1691 since they appear as targets in Makefile.in.
1692 * configure: Rebuild.
1694 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1696 * mpw-make.sed: Edit out shared library support bits.
1698 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1700 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1701 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1702 (sparc_opcodes): Add sparclet insns.
1703 (sparclet_cpreg_table): New static local.
1704 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1705 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1707 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1709 * i386-dis.c (index16): New static variable.
1710 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1712 (OP_indirE): Return result of OP_E.
1713 (OP_E): Check for 16 bit addressing mode, and disassemble
1714 correctly. Optimised 32 bit case a little. Don't print
1715 "(base,index,scale)" when sib specifies only an offset.
1717 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1719 * configure.in: Set and substitute SHLIB_DEP.
1720 * configure: Rebuild.
1721 * Makefile.in (SHLIB_DEP): New variable.
1722 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1723 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1724 COMMON_SHLIB, add them to piclist with appropriate modifications.
1725 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1726 here: just use piclist.
1728 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1730 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1731 (print_insn_sparc): Rewrite v9/not-v9 tests.
1732 (compare_opcodes): Likewise.
1733 * sparc-opc.c (MASK_<ARCH>): Define.
1734 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1735 (sparclet,v6notv9): Define.
1736 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1737 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1739 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1741 * configure.in: Call AC_PROG_CC before configure.host.
1742 * configure: Rebuild.
1744 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1746 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1748 * i386-dis.c (onebyte_has_modrm): New static array.
1749 (twobyte_has_modrm): New static array.
1750 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1752 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1754 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1757 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1759 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1762 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1764 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1765 m68010up, not just m68020up | cpu32.
1767 * Makefile.in (SONAME): New variable.
1768 ($(SHLINK)): Make a link to the transformed name, as well.
1769 (stamp-tshlink): New target.
1770 (install): Skip stamp-tshlink during install.
1772 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1774 * configure.in: Call AC_ARG_PROGRAM.
1775 * configure: Rebuild.
1776 * Makefile.in (program_transform_name): New variable.
1777 (install): Transform library name before installing it.
1779 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1781 * i960-dis.c (mem): Add HX dcinva instruction.
1783 Support for building as a shared library, based on patches from
1784 Alan Modra <alan@spri.levels.unisa.edu.au>:
1785 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1786 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1787 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1788 * configure: Rebuild.
1789 * Makefile.in (ALLLIBS): New variable.
1790 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1791 (COMMON_SHLIB, SHLINK): New variables.
1792 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1793 (STAGESTUFF): Remove variable.
1794 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1795 (stamp-piclist, piclist): New targets.
1796 ($(SHLIB), $(SHLINK)): New targets.
1797 ($(OFILES)): Depend upon stamp-picdir.
1798 (disassemble.o): Build twice if PICFLAG is set.
1799 (MOSTLYCLEAN): Add pic/*.o.
1800 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1801 (distclean): Remove pic and stamp-picdir.
1802 (install): Install shared libraries.
1803 (stamp-picdir): New target.
1805 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1807 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1808 Print unknown instruction as "unknown", rather than in hex.
1810 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1812 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1814 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1816 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1818 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1820 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1821 when necessary. From Ulrich Drepper
1822 <drepper@myware.rz.uni-karlsruhe.de>.
1824 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1826 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1827 sparc_num_opcodes. Update architecture enum values.
1828 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1829 (sparc_opcode_lookup_arch): New function.
1830 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1831 (sparc_opcodes): Add v9a shutdown insn.
1833 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1835 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1836 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1838 (print_insn_sparc64): Deleted.
1839 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1842 * sparc-opc.c (architecture_pname): Add v9a.
1844 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1846 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1847 incorrectly defined as 0x16 when it should be 0x15.
1848 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1849 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1850 excb (exception barrier) which is defined in the Alpha
1851 Architecture Handbook version 2.
1852 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1853 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1854 disassembled as or, for example.
1856 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1858 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1859 (_print_insn_mips): Change i from int to unsigned int.
1861 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1863 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1864 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1866 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1868 * i386-dis.c: Added Pentium Pro instructions.
1870 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1872 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1875 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1877 * sh-opc.h (sh_nibble_type): Added REG_B.
1878 (sh_arg_type): Added A_REG_B.
1879 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1881 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1883 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1885 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1887 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1889 * Makefile.in (distclean): Remove stamp-h. From Ronald
1890 F. Guilmette <rfg@monkeys.com>.
1892 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1894 From David Mosberger-Tang <davidm@azstarnet.com>:
1895 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1898 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1900 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1901 (sh_table): Added many SH3 opcodes.
1902 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1904 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1906 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1907 (subco,subco.): Mark this PPC, not PPCCOM.
1909 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1911 * configure: Rebuild with autoconf 2.7.
1913 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1915 * configure: Rebuild with autoconf 2.6.
1917 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1919 * configure.in: Sort list of architectures. Accept but do nothing
1920 for alliant, convex, pyramid, romp, and tahoe.
1922 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1924 * a29k-dis.c (print_special): Change num to unsigned int.
1926 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1928 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1931 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1933 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1934 * configure: Rebuilt.
1936 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1938 * configure.in: Add case for bfd_i860_arch.
1939 * configure: Rebuild.
1941 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1943 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1944 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1945 (NEXTDOUBLE): Likewise.
1946 (print_insn_m68k): Don't match fmoveml if there is more than one
1947 register in the list.
1948 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1950 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1952 * m68k-opc.c: Use #W rather than #w.
1953 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1955 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1957 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1958 and likewise for all the dbxx opcodes.
1960 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1962 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1964 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1966 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1967 the VR4100 specific instructions to the mips_opcodes structure.
1969 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1971 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1972 ugly Metrowerks bug in CW6, is fixed in CW7.
1974 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1976 * ppc-opc.c (whole file): Add flags for common/any support.
1978 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1980 * Makefile.in (BISON): Remove macro.
1981 (FLAGS_TO_PASS): Remove BISON.
1983 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1985 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1987 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1988 instructions that take no args by looking at the match mask.
1989 (print_insn_arg): Always print "%" before register names.
1990 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1991 [case '_']: Don't print "@#" before address.
1992 [case 'J']: Use "%s" as format string, not register name.
1993 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1995 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1997 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2000 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2002 From David Mosberger-Tang <davidm@azstarnet.com>
2004 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2005 (alpha_insn_set): added definitions for VAX floating point
2006 instructions (Unix compilers don't generate these, but handcoded
2007 assembly might still use them).
2009 * alpha-dis.c (print_insn_alpha): added support for disassembling
2010 the miscellaneous instructions in the Alpha instruction set.
2012 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2014 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2015 no longer create sysdep.h, sed ppc-opc.c to work around a
2016 serious Metrowerks C bug.
2017 * mpw-make.in: Remove.
2018 * mpw-make.sed: New file, used by mpw-configure to edit
2019 Makefile.in into an MPW makefile.
2021 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2023 * Makefile.in (maintainer-clean): New synonym for realclean.
2025 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2027 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2028 which use '0', '1', and '2' instead. Specify the proper size for
2029 a pmove immediate operand. Correct the pmovefd patterns to be
2030 moves to a register, not from a register.
2031 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2033 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2035 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2036 %psr, %wim, %tbr as F_NOTV9.
2038 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2040 * Makefile.in (Makefile): Just rebuild Makefile when running
2042 (config.h, stamp-h): New targets.
2043 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2044 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2045 rebuilding config.h.
2046 * configure: Rebuild.
2048 * mips-opc.c: Change unaligned loads and stores with "t,A"
2049 operands to use "t,A(b)".
2051 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2053 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2055 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2057 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2058 until 3 instead of until 2.
2060 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2062 * Makefile.in (ALL_CFLAGS): Define.
2063 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2064 (MOSTLYCLEAN): Add config.log.
2065 (distclean): Don't remove config.log.
2066 * configure.in: Substitute HDEFINES.
2067 * configure: Rebuild.
2069 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2071 * sh-opc.h (sh_arg_type): Add F_FR0.
2072 (sh_table, case fmac): Add F_FR0 as first argument.
2074 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2076 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2078 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2080 * sparc-dis.c: Remove all references to NO_V9.
2082 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2084 * aclocal.m4: Just include ../bfd/aclocal.m4.
2085 * configure: Rebuild.
2087 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2089 * sparc-dis.c (X_DISP19): Define.
2090 (print_insn, case 'G'): Use it.
2091 (print_insn, case 'L'): Sign extend displacement.
2093 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2095 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2096 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2097 host_makefile_frag or frags.
2098 * aclocal.m4: New file.
2099 * configure: Rebuild.
2100 * Makefile.in (INSTALL): Set to @INSTALL@.
2101 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2102 (INSTALL_DATA): Set to @INSTALL_DATA@.
2104 (AR_FLAGS): Set to rc rather than qc.
2105 (CC): Define as @CC@.
2106 (CFLAGS): Set to @CFLAGS@.
2107 (@host_makefile_frag@): Remove.
2108 (config.status): Remove dependency upon @frags@.
2110 * configure.in: ../bfd/config.bfd now just sets shell variables.
2111 Use them rather than looking through target Makefile fragments.
2112 * configure: Rebuild.
2114 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2116 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2118 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2120 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2121 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2124 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2125 (lookup_{name,value}): New functions.
2126 (prefetch_table): New static local.
2127 (sparc_{encode,decode}_prefetch): New functions.
2128 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2130 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2132 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2135 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2137 * sh-dis.c: Correct comment on first line of file.
2139 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2141 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2143 * sparc-opc.c (asi, membar): New static locals.
2144 (sparc_{encode,decode}_{asi,membar}): New functions.
2145 (sparc_opcodes, membar insn): Fix.
2146 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2147 Support decoding of membar masks.
2150 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2152 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2154 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2156 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2157 and likewise for the other branches. Add bhs as an alias for bcc,
2158 and likewise for the size variants. Add dbhs as an alias for
2161 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2163 * sh-opc.h (FP sts instructions): Update to match reality.
2165 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2167 * m68k-dis.c: (fpcr_names): Add % before all register names.
2168 (reg_names): Likewise.
2169 (print_insn_arg): Don't explicitly print % before register names.
2170 Add % before register names in static array names. In case 'r',
2171 print data registers as `@(Dn)', not `Dn@'. When printing a
2172 memory address, don't print @# before it.
2173 (print_indexed): Change base_disp and outer_disp from int to
2174 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2175 syntax. Sign extend 8 byte displacement correctly.
2176 (print_base): Print using MIT syntax. Print zpc when appropriate.
2177 Change parameter disp from int to bfd_vma.
2179 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2182 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2184 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2185 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2186 * sh-opc.h (sh_arg_type): Add new operand types.
2187 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2189 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2191 * Makefile.in (distclean): Remove generated file config.h.
2193 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2195 * Makefile.in (distclean): Remove generated file config.h.
2197 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2199 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2201 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2203 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2204 rather than numopcodes. Use m68k_opcodes rather than removed
2205 opcode function. Don't check F_ALIAS.
2206 (print_insn_arg): Change first parameter to be const char *.
2207 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2208 (m68k-opc.o): New target.
2209 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2210 * configure: Rebuild.
2212 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2214 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2215 (opcode_bits, opcode_hash_table): New variables.
2216 (opcodes_initialized): Renamed from opcodes_sorted.
2217 (build_hash_table): New function.
2218 (is_delayed_branch): Use hash table.
2219 (print_insn): Renamed from print_insn_sparc, made static.
2220 Build and use hash table. If !sparc64, ignore sparc64 insns,
2221 and vice-versa if sparc64.
2222 (print_insn_sparc, print_insn_sparc64): New functions.
2223 (compare_opcodes): Move sparc64 opcodes to end.
2224 Print commutative insns with constant second.
2225 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2227 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2229 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2230 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2231 avoids printing a delay slot in a delay slot.
2232 * sh-opc.h (sh_table): Fully bracket last entry.
2234 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2236 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2238 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2240 * configure.in: Get host_makefile_frag from ${srcdir}.
2242 * configure.in: Autoconfiscated. Check for string[s].h. Create
2243 config.h from config.in. Don't set up sysdep.h link.
2244 * sysdep.h: New file.
2245 * configure, config.in: New files, generated from configure.in.
2246 * Makefile.in: Updated to be processed autoconf-style.
2247 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2248 (Makefile): Depend on config.status.
2249 (config.status): New rule.
2250 * configure.bat: Update Makefile substitutions.
2252 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2254 * mips-opc.c (L1): Define.
2255 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2256 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2259 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2261 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2262 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2263 have multiple add units but only a single logical unit.
2265 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2266 shifted by 18, without any insertion or extraction function.
2267 (insert_cr, extract_cr): Remove.
2270 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
2272 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
2275 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2277 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2280 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2282 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2283 * sh-opc.h: Add copyright.
2285 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2287 * Makefile.in (crunch-m68k): Delete extra target accidentally
2288 checked in a while ago.
2290 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2292 * sh-opc.h (sh_table): Add SH3 support.
2294 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2296 * sh-opc.h: Added bsrf and braf.
2298 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2300 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2301 bogus [ls]fm{ea,fd} patterns.
2303 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2304 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2305 initialize it from memory. Make function static.
2306 (print_insn_{big,little}_arm): New functions.
2307 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2308 the correct endianness.
2311 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
2313 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
2314 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
2317 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2319 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2322 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2324 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2325 17th, so that it builds again using GCC as the compiler.
2327 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2329 * mips-dis.c (print_insn_little_mips): Cast return value from
2330 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2331 expects an unsigned long, and that might be fewer words of
2332 argument storage (e.g., if bfd_vma is long long on a 32-bit
2334 (print_insn_big_mips): Likewise with bfd_getb32 value.
2335 (_print_insn_mips): Now static.
2337 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2339 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2340 gcc memory hog problem with initializer is fixed.
2343 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
2345 * arc-opc.c (NULL): Define.
2346 (arc_operands, insn fields u,s): Delete.
2347 (arc_operands, insn fields a,b,c): Mark as signed.
2348 (arc_opcodes): No longer const, links computed at run-time.
2349 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
2350 suffixes that affect the insn code.
2351 (arc_opcodes): Resort table to macros are first.
2352 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
2353 (arc_opcodes, st [b] entry): Likewise.
2354 (arc_opcodes, st [b,d] entry): Fix mask, value.
2355 (arc_reg_names): Add entries for r29, r30, r31, r60.
2356 (opcode_map, icode_map): New static globals.
2357 (arc_opcode_init_tables): Initialize them.
2358 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
2359 (insert_shimmoffset): Signal error if register present.
2361 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
2364 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2366 Merge in support for Mac MPW as a host.
2367 (Old change descriptions retained for informational value.)
2369 * mpw-config.in (archname): Compute from the config.
2370 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2372 * mpw-config.in (target_arch): Compute from canonical target.
2373 (m68k, mips, powerpc, sparc): Add architectures.
2374 * mpw-make.in (disassemble.c.o): Add.
2375 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2377 * mpw-config.in (BFD_MACHINES): Set to a default value.
2378 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2380 * mpw-make.in (CSEARCH): Add extra-include to search path.
2382 * mpw-config.in (varargs.h): Don't create.
2383 (sysdep.h): Create using forward-include.
2384 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2386 * mpw-config.in: New file, MPW version of configure.in.
2387 * mpw-make.in: New file, MPW version of Makefile.in.
2390 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
2392 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
2393 Call arc_get_opcode_mach to map bfd mach number to opcode value.
2394 (print_insn_*): Pass bfd mach number, not opcode version.
2395 * arc-opc.c (arc_get_opcode_mach): New function.
2398 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2400 * alpha-dis.c (print_insn_alpha): Put empty statement after
2403 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2405 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2406 (low_sign_extend): Likewise.
2407 (get_field): Delete unused function.
2408 (set_field, deposit_14, deposit_21): Likewise.
2410 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2412 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2415 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2417 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2419 * alpha-opc.h (OSF_ASMCODE): define
2420 print pal-code names as defined in App C of the
2421 Alpha Architecture Reference Manual
2423 * alpha-dis.c: cleaned up output
2424 print stylized code forms as defined in App A.4.3 of the
2425 Alpha Architecture Reference Manual
2427 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2429 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2431 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2434 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2436 * m68k-dis.c (opcode): New function. Returns address of opcode
2437 table entry given index, even if the opcode table was split to
2438 work around gcc bugs.
2439 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2441 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2442 (reg_names): Now const.
2443 (print_insn_arg): Arrays cacheFieldName and names now const.
2444 (print_indexed): Array scales now const.
2447 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2449 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2450 (print_insn_arc_{host,graphics,audio}): Likewise.
2451 (print_insn): Add prototype.
2452 (arc_get_disassembler): New arg `big_p'. Return little or big
2453 print fn accordingly.
2454 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2455 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2456 (arc_opval_supported): Likewise.
2457 * disassemble.c (disassembler): Pass big endian flag to
2458 arc_get_disassembler.
2461 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2463 * ppc-opc.c: Sort recently added instructions by minor opcode
2464 number within major opcode number.
2466 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2468 * hppa-dis.c: Include libhppa.h.
2470 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2472 * mips-opc.c: Change dli to use M_DLI, and add dla.
2474 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2476 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2479 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2481 * arc-dis.c (arc_get_disassembler): Change argument to int,
2482 one of bfd_mach_arc_xxx. All callers updated.
2485 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2487 * mips-opc.c: Add r4650 mul instruction.
2489 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2491 * mips-opc.c: Add uld and usd macros for unaligned double load and
2494 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2496 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2497 mfdcr, mtdcr, icbt, iccci.
2500 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2502 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2503 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2504 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2505 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2506 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2507 (insert_absaddr): New function.
2509 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2511 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2512 New argument `cpu', pass it to arc_opcode_init_tables.
2513 Document byte order dependencies. Ignore unsupported insns.
2514 (arc_get_disassembler): New function.
2515 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2516 print_insn_arc_audio): New functions.
2517 * arc-opc.c (MULTSHIFT operand): Delete.
2518 (UNSIGNED, SATURATION): New operands.
2519 (mac, mul, mul64, mulu64): New insns.
2520 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2521 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2522 (host,graphics,audio extended and auxiliary regs): Define.
2523 (ss, sc, mh, ml): New suffixes.
2524 (arc_opcode_supported, arc_opval_supported): New functions.
2525 (insert_multshift, extract_multshift): Deleted.
2526 * disassemble.c (disassembler, case bfd_arch_arc): Call
2527 arc_get_disassembler to get disassembler routine.
2530 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2532 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2533 signed char fields to shorts, more portable.
2535 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2537 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2538 char fields as signed chars, since they may have negative values.
2540 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2542 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2543 (mycroft@netbsd.org).
2545 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2547 From "Logg, Ed" <elogg@ea.com>:
2548 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2549 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2552 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2554 * ppc-opc.c: Changes based on patch from David Edelsohn
2555 <edelsohn@mhpcc.edu>.
2556 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2559 (insert_tbr): New static function.
2560 (extract_tbr): New static function.
2561 (XFXFXM_MASK, XFXM): Define.
2562 (XSPRBAT_MASK, XSPRG_MASK): Define.
2563 (powerpc_opcodes): Add instructions to access special registers by
2564 name. Add mtcr and mftbu.
2566 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2568 * mips-opc.c (P3): Define.
2569 (mips_opcodes): Add mad and madu.
2571 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2573 * configure.in: Add W65 support.
2574 * disassemble.c: Likewise.
2575 * w65-opc.h, w65-dis.c: New files.
2577 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2579 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2583 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2585 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2587 * arc-opc.c (extract_reladdr): New function.
2588 (insert_reladdr): Store address right-shifted by 2.
2591 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2593 * mips-opc.c: Add dli as a synonym for li.
2596 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2598 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2600 (extraction fns): Insn argument now array of two words. Return pointer
2601 to value's table entry. All uses changed.
2602 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2603 (insert_multshift, extract_multshift): New fns.
2604 (arc_operands): Add support for cache bypass suffix. Add support for
2605 predefined aux regs. Modifier bits moved to flags field.
2606 (arc_opcodes): Likewise.
2607 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2608 New insn rlc. Update to syntax in programmer's manual.
2609 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2610 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2612 (arc_opcode_init_tables): New argument to indicate cpu type.
2613 (insert_reg): Handle predefined aux regs.
2614 (extract_reg): Likewise.
2615 (lookup_register): New fn.
2616 * arc-dis.c (arc_condition_codes): Deleted.
2617 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2618 Clean up modifier handling. Handle predefined aux regs.
2621 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2623 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2624 print something for reserved opcode values, even if it won't
2627 * mips-dis.c (_print_insn_mips): When initializing, shift right
2628 and mask, to avoid sign extension problems on the Alpha.
2630 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2634 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2636 * configure.in: Add ARC support.
2637 * disassemble.c: Likewise.
2638 * arc-dis.c, arc-opc.c: New files.
2641 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2643 * sh-opc.h (mov.l gbr): Get direction right.
2644 * sh-dis.c (print_insn_shx): New function.
2645 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2646 print opcodes with right byte order.
2648 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2650 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2651 to avoid conflicts with getopt.
2653 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2655 * hppa-dis.c (print_insn_hppa): Read the instruction using
2656 bfd_getb32, so that it works on a little endian or 64 bit host.
2657 Remove unused local variable op.
2659 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2661 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2662 addu does not work correctly if -mips3.
2664 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2666 * a29k-dis.c (print_special): Add special register names defined
2667 on 29030, 29040 and 29050.
2668 (print_insn): Handle new operand type 'I'.
2670 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2672 * Makefile.in (INSTALL): Use top level install.sh script.
2674 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2676 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2677 that it works on a little endian host.
2679 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2681 * configure.in: Use ${config_shell} when running config.bfd.
2683 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2685 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2687 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2689 * a29k-dis.c (print_insn): Print the opcode.
2691 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2693 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2695 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2697 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2699 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2701 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2702 which store a value into memory.
2704 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2706 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2707 * arm-dis.c, arm-opc.h: New files.
2709 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2711 * Makefile.in (ns32k-dis.o): Add dependency.
2712 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2713 string, not as array of chars.
2715 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2717 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2719 * sparc-opc.c: Added sparclite extended FP operations, and
2720 versions of v9 impdep* instructions permitting specification of
2723 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2725 * i960-dis.c (reg_names): Now const.
2726 (struct sparse_tabent): New type, copied from array type in mem
2728 (ctrl): Local static array ctrl_tab now const.
2729 (cobr): Local static array cobr_tab now const.
2730 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2731 static variable mem_tab no longer explicitly initialized. Changed
2732 mem_init to const array of struct sparse_tabent.
2733 (reg): Local static variable reg_tab no longer explicitly
2734 initialized. Changed reg_init to const array of struct
2736 (ea): Local static array scale_tab now const.
2738 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2741 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2743 * configure.bat: the disassember needs to be enabled for
2744 "objdump -d" to work in djgpp.
2746 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2748 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2749 (invalid_float): Enabled general version, doesn't require running
2750 on ns32k host. Changed to take char* argument, and test for
2751 explicitly specified sizes, instead of using sizeof() on host CPU
2753 (INVALID_FLOAT): Cast first argument.
2754 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2755 list_P032, list_M032): Now const.
2756 (optlist, list_search): Made appropriate arguments now point to
2758 (print_insn_arg): Changed static array of one-character-string
2759 pointers into a static const array of characters; fixed sprintf
2760 statement accordingly.
2762 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2764 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2765 from distribution. A ns32k-dis.c from a previous distribution has
2766 been brought up to date and supports the new interface.
2768 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2770 * configure.in: add bfd_ns32k_arch target support.
2772 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2773 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2775 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2777 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2780 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2782 * h8300-dis.c, mips-dis.c: Don't use true and false.
2784 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2786 * configure.in: Change --with-targets to --enable-targets.
2788 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2790 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2791 opcodes to the first instruction with that opcode, to speed
2792 disassembly of large files. From ralphc@pyramid.com (Ralph
2795 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2797 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2799 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2801 * configure.bat: update to latest makefile.in
2803 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2805 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2806 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2807 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2808 slot insn is in a delay slot.
2809 * z8k-opc.h: (resflg): Fix patterns.
2810 * h8500-opc.h Fix CR insn patterns.
2812 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2814 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2815 "cmpl" before POWER versions, so that gas -many uses them.
2817 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2819 * disassemble.c: New file.
2820 * Makefile.in (OFILES): Add disassemble.o.
2821 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2822 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2823 binutils/configure.in.
2825 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2826 opcode being examined.
2828 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2830 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2831 (insert_ral, insert_ram, insert_ras): New functions.
2832 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2833 RAS for store with update.
2835 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2837 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2838 (edelsohn@npac.syr.edu).
2840 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2842 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2845 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2847 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2849 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2851 * ppc-opc.c (powerpc_operands): The signedp field has been
2852 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2853 instead. Add new operand SISIGNOPT.
2854 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2855 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2856 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2859 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2861 * i386-dis.c (struct private): Renamed to dis_private. `private'
2862 is a reserved word for dynix cc.
2864 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2866 * configure.in: Change error message to refer to bfd/config.bfd
2867 rather than bfd/configure.in.
2869 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2871 * ppc-opc.c: Define POWER2 as short alias flag.
2872 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2875 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2877 * i960-dis.c (print_insn_i960): Don't read a second word for
2878 opcodes 0, 1, 2 and 3.
2880 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2882 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2884 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2886 * m68881-ext.c: Removed; no longer used.
2887 * Makefile.in: Changed accordingly.
2889 * m68k-dis.c (ext_format_68881): Don't declare.
2890 (print_insn_m68k): If an instruction uses place 'i', it uses at
2891 least four fixed bytes.
2892 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2893 extended float, convert to double using floatformat_to_double, not
2894 ieee_extended_to_double, and fetch the data before converting it.
2896 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2898 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2899 davidj@ICSI.Berkeley.EDU (David Johnson).
2901 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2903 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2904 PowerPC uses bdnz[l][a].
2906 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2908 * dis-buf.c, i386-dis.c: Include sysdep.h.
2910 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2912 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2914 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2915 by Motorola PowerPC 601 with PPC_OPCODE_601.
2916 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2917 Disassemble Motorola PowerPC 601 instructions as well as normal
2918 PowerPC instructions.
2920 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2922 * i960-dis.c (reg, mem): Just use a static array instead of
2925 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2927 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2928 condition name index if this is for a negated condition.
2930 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2931 Floating point format for 'H' operand is backwards from normal
2932 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2933 operands (fmpyadd and fmpysub), handle bizarre register
2934 translation correctly for single precision format.
2936 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2937 or 'I' operands if the next format specifier is 'M' (fcmp
2938 condition completer).
2940 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2942 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2943 single number giving a bitmask for the MB and ME fields of an M
2944 form instruction. Change NB to accept 32, and turn it into 0;
2945 also turn 0 into 32 when disassembling. Seperated SH from NB.
2946 (insert_mbe, extract_mbe): New functions.
2947 (insert_nb, extract_nb): New functions.
2948 (SC_MASK): Mask out SA and LK bits.
2949 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2950 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2951 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2952 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2953 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2954 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2955 (powerpc_macros): Define table of macro definitions.
2956 (powerpc_num_macros): Define.
2958 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2959 if PPC_OPERAND_NEXT is set.
2961 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2963 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2964 char. Retrieve contents using bfd_getl32 instead of shifting.
2966 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2968 * ppc-opc.c: New file. Opcode table for PowerPC, including
2969 opcodes for POWER (RS/6000).
2970 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2971 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2972 (CFILES): Add ppc-dis.c.
2973 (ppc-dis.o, ppc-opc.o): New targets.
2974 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2976 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2978 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2979 No space before 'u', 'f', or 'N'.
2981 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2983 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2984 farther than we should.
2986 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2988 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2990 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2992 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2994 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2995 needs it, to prevent reading past the end of a section.
2997 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2999 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3000 Removed t,A case for la; always use t,A(b) case.
3002 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3004 From Ted Lemen <mellon@pepper.ncd.com>
3005 * mips-dis.c (print_insn_arg): Handle 'k'.
3006 * mips-opc.c: Make cache use k, not t.
3008 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3010 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3011 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3012 FLOAT_FORMAT_CODE to put out floating point register names.
3014 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3016 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3018 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3020 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3022 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3024 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3025 larger than 32. Moved dsxx32 variants first for disassembler.
3027 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3029 * z8kgen.c, z8k-opc.h: Add full lda information.
3031 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3033 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3034 movb instructions. Any necessary space will be emitted by
3035 the code to handle nullification completers.
3037 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3039 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3041 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3043 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3044 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3046 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3048 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3050 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3052 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3053 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3055 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3057 * m88k-dis.c (m88kdis): comment change. Remove space after
3059 (printop): handle new arg types DEC and XREG for m88110.
3061 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3063 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3064 type for absolute branch addresses. Delete special
3065 "ble" and "be" code in 'W' operand code.
3067 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3069 * mips-opc.c: Set hazard information correctly for branch
3070 likely instructions.
3072 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3074 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3075 info->fprintf_func for printing and info->print_address_func for
3078 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3080 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3082 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3084 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3085 Corrected second case of "b" for disassembler.
3087 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3089 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3090 to BFD swapping routines to correspond to BFD name changes.
3092 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3094 * mips-opc.c: Change div machine instruction to be z,s,t rather
3095 than s,t. Change div macro to be d,v,t rather than d,s,t.
3096 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3097 rem and remu which generates only the corresponding div
3098 instruction. This is for compatibility with the MIPS assembler,
3099 which only generates the simple machine instruction when an
3100 explicit destination of $0 is used.
3101 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3103 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3105 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3106 WR_31 hazard for bal, bgezal, bltzal.
3108 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3110 * hppa-dis.c (print_insn_hppa): Use print function
3111 from within the disassemble_info, not fprintf_filtered.
3113 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3115 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3116 Law, law@cs.utah.edu.)
3118 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3120 * mips-opc.c ("absu"): Removed.
3123 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3125 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3126 Changed hazard information to distinguish between memory load
3127 delays and coprocessor load delays.
3129 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3131 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3133 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3135 * configure.in: Don't pass cpu to config.bfd.
3137 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3139 * m88k-dis.c (m88kdis): Make class unsigned.
3141 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3143 * alpha-dis.c (print_insn_alpha): One branch format case was
3144 missing the instruction name.
3146 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3148 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3149 Add the arch-specific auxiliary files.
3150 (OFILES): Remove the arch-specific auxiliary files
3151 and use BFD_MACHINES instead of DIS_LIBS.
3152 * configure.in: Set BFD_MACHINES based on --with-targets option.
3154 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3156 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3159 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3161 * sparc-opc.c: Change CONST to const to deal with gcc
3162 -Dconst=__const -traditional.
3164 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3166 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3167 coprocessor instructions out of #if 0, and made them use new
3170 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3172 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3174 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3176 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3177 instruction, for use by the disassembler.
3179 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3180 hand-coded sign extensions that depended on 32-bit host ints.
3181 FIXME, we still depend on big-endian host bitfield ordering.
3182 (sparc_print_insn): Set the insn_info_valid field, and the
3183 other fields that describe the instruction being printed.
3185 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3187 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3188 `jmp' instead of just one of them.
3190 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3192 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3193 (fput_fp_reg_r): Renamed from fput_reg_r.
3194 (fput_fp_reg): New function.
3195 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3197 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3199 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3201 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3203 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3205 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3206 don't output a space.
3208 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3210 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3212 * mips-opc.c: New file, containing opcode table from
3213 ../include/opcode/mips.h.
3214 * Makefile.in: Add it.
3216 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3218 * m88k-dis.c: New file, moved in from gdb and changed to use the
3219 new dis-asm.h disassembler interface.
3220 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3221 (m88k-dis.o): New target.
3223 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3225 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3226 argument string const char * to correspond to opcode/mips.h.
3228 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3230 * mips-dis.c: Updated to account for name changes in new version
3232 * Makefile.in: Added header file dependencies.
3234 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3236 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3238 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3240 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3241 extend, rather than shifts.
3243 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3245 * Makefile.in: Undo 15 June change.
3247 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3249 * m68k-dis.c (print_insn_arg): Change return value to byte count
3251 * m68k-dis.c: Re-write to detect invalid operands before
3252 printing anything, so we can handle this the same way we
3253 handle invalid opcodes.
3255 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3257 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3259 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3261 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3264 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3266 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3268 * configure.in: Do make sysdep.h link.
3269 * Makefile.in: Search ../include. Don't search ../bfd.
3271 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3273 Changes from Jeff Law, law@cs.utah.edu:
3274 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3275 Do not print a space before the completers specified by
3278 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3280 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3281 defined, since gdb has been fixed.
3283 Changes from Jeff Law, law@cs.utah.edu:
3284 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3285 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3286 be a *disassemble_info, not a *FILE.
3287 * hppa-dis.c: Support 'd', '!', and 'a'.
3288 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3289 * hppa-dis.c: Delete cases which are no longer needed.
3291 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3293 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3295 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3297 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3300 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3302 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3303 * configure.in: No longer need to configure to get sysdep.h.
3305 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3307 * Patches from Jeffrey Law <law@cs.utah.edu>.
3308 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3309 templates for 1.1 FP computational instructions.
3311 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3313 * h8500-dis.c (print_insn_h8500): Address argument is type
3315 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3318 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3319 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3321 * sparc-dis.c (compare_opcodes): Move static declaration to
3324 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3326 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3327 instruction, remove unimp hack from 'l' argument.
3329 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3331 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3334 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3336 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3337 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3340 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3342 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3343 arrays of string pointers to 2-d arrays of chars, to save
3346 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3348 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3349 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3351 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3353 * hppa-dis.c: New file from Utah, adapted to new disassembler
3355 * Makefile.in: Include it.
3357 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3359 * sh-dis.c, sh-opc.h: New files.
3361 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3363 * alpha-dis.c, alpha-opc.h: New files.
3365 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3367 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3370 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3372 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3374 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3376 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3379 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3381 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3382 and double percent signs a few places.
3384 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3386 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3387 Use info->print_address_func not print_address.
3389 * dis-buf.c (generic_print_address): New function.
3391 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3393 * Makefile.in: Add sparc-dis.c.
3394 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3396 Add `add' instruction to the set that get checked
3397 for a preceding `sethi' in order to print an absolute address.
3398 * (print_insn): Disassembly prefers real instructions.
3399 (is_delayed_branch): Speed up.
3400 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3401 Still missing some float ops, and needs testing.
3402 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3403 F_ALIAS. Use printf, not fprintf, when not passing a file
3405 (compare_opcodes): Check that identical instructions have
3406 identical opcodes, complain otherwise.
3409 * Include reg_names.
3411 Use dis-asm.h/read_memory_func interface.
3413 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3415 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3416 deliberately return non-zero to setjmp from longjmp. Otherwise
3417 this code fails to compile.
3419 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3421 * m68k-dis.c: Fix prototype for fetch_arg().
3423 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3425 * dis-buf.c: New file, for new read_memory_func interface.
3426 Makefile.in (OFILES): Include it.
3427 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3428 Use new read_memory_func interface.
3430 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3432 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3433 * h8500-opc.h: Fix couple of opcodes.
3435 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3437 * Makefile.in: add dvi & installcheck targets
3439 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3441 * Makefile.in: Update for h8500-dis.c.
3443 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3445 * h8500-dis.c, h8500-opc.h: New files
3447 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3449 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3450 ../include/dis-asm.h.
3451 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3452 and ../gdb/m68k-pinsn.c).
3453 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3454 and ../gdb/i386-pinsn.c).
3455 * m68881-ext.c: New file. Moved definition of
3456 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3457 * Makefile.in: Adjust for new files.
3458 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3459 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3460 can be dis-assembled.
3462 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3464 * mips-dis.c (print_insn_arg): Now returns void.
3466 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3468 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3469 files that use the macros.
3471 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3473 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3474 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3475 (CFILES): Added mips-dis.c.
3477 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3479 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3480 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3482 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3484 * Makefile.in: Improve *clean rules.
3485 * configure.in: Allow a default host.
3487 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3489 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3490 files include other sysdep files
3492 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3494 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3496 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3498 * configure.in: For host support, use ../bfd/configure.host
3499 so it stays in sync with the ../bfd/hosts database.
3501 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3503 * configure.in: use cpu-vendor-os triple instead of nested cases
3505 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3507 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3508 *always* the wrong one.
3510 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3512 * z8kgen.c: added copyright info
3514 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3516 * z8k-dis.c (unparse_instr): prettier tabs
3517 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3519 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3521 * configure.in: Add ncr* configuration.
3522 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3523 picayune ANSI compilers happy.
3525 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3527 * configure.in (i386): Make i386 and i486 synonymous for now.
3528 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3530 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3532 * Makefile.in (install): Fix typo.
3534 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3536 * Makefile.in (make): Remove obsolete crud.
3537 (sparc-opc.o): Avoid Sun Make VPATH bug.
3539 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3541 * Makefile.in: since there are no SUBDIRS, remove rule and
3542 references of subdir_do.
3544 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3546 * Makefile.in (install): Get the library name right here too.
3547 Don't install bfd.h, since it's unrelated to this library. No
3548 subdirs to recurse into, either.
3549 (CFILES): The source file has a .c suffix, not .o.
3551 * sparc-opc.c: New file, moved from BFD.
3552 * Makefile.in (OFILES): Build it.
3554 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3556 * z8k-dis.c: fixed forward refferences of some declarations.
3558 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3560 * Makefile.in: get the name of the library right
3562 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3564 * z8k-dis.c: knows how to disassemble z8k stuff
3565 * z8k-opc.h: new file full of z8000 opcodes
3569 version-control: never