1 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
3 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
4 cleaner code using completer prefixes. Add 'Y'.
6 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
8 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
10 * hppa-dis.c (extract_22): New function.
12 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
14 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
16 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
18 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
20 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
22 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
24 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
26 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
28 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
30 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
32 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
34 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
37 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
39 * hppa-dis.c: (print_insn_hppa): Add missing break after
42 * hppa-dis.c: Finish constifying various completers, register
45 1999-09-14 Michael Meissner <meissner@cygnus.com>
47 * configure.in (Canonicalization of target names): Remove adding
48 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
49 generates $ac_config_sub with a ${CONFIG_SHELL} already.
50 * configure: Regenerate.
52 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
54 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
56 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
58 1999-09-07 Nick Clifton <nickc@cygnus.com>
60 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
61 names for the mulu and muls patterns.
63 1999-09-04 Steve Chamberlain <sac@pobox.com>
67 * disassemble.c (disassembler): Handle bfd_arch_pj.
68 * configure.in: Handle bfd_pj_arch.
69 * Makefile.am: Rebuild dependencies.
70 (CFILES): Add pj-dis.c and pj-opc.c.
71 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
72 * configure, Makefile.in: Rebuild.
74 1999-09-04 H.J. Lu <hjl@gnu.org>
76 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
78 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
80 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
82 1999-08-04 Doug Evans <devans@casey.cygnus.com>
84 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
85 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
86 * m32r-opinst.c: Rebuild.
88 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
90 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
93 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
95 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
96 extract_10U_store): New.
97 (print_insn_hppa): Add new completers.
99 * hppa-dis.c (signed_unsigned_names,mix_half_names,
100 saturation_names): New.
101 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
103 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
105 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
107 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
108 to decide to print a space.
110 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
112 * i386-dis.c: Add AMD athlon instruction support.
114 1999-08-10 Ian Lance Taylor <ian@zembu.com>
116 From Wally Iimura <iimura@microunity.com>:
117 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
118 overflow at end of address space.
119 (generic_print_address): Use sprintf_vma.
121 1999-08-08 Ian Lance Taylor <ian@zembu.com>
123 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
124 MKDEP. Rebuild dependencies.
125 * Makefile.in: Rebuild.
127 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
129 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
130 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
131 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
132 (print_insn_hppa): Add 64 bit condition completers.
134 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
136 * hppa-dis.c (print_insn_hppa): Change condition args to use
139 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
141 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
144 1999-07-21 Ian Lance Taylor <ian@zembu.com>
147 * configure.bat: Remove; obsolete.
149 1999-07-11 Ian Lance Taylor <ian@zembu.com>
151 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
152 (generic_strcat_address): Add cast to avoid warning.
153 * i386-dis.c: Initialize all structure fields to avoid warnings.
154 Add ATTRIBUTE_UNUSED as appropriate.
156 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
158 * sparc-dis.c (print_insn_sparc): Differentiate between
159 addition and oring when guessing symbol for comment.
161 1999-07-05 Nick Clifton <nickc@cygnus.com>
163 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
166 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
168 * i386-dis.c: Mention intel mode specials in macro char comment.
170 1999-06-21 Ian Lance Taylor <ian@zembu.com>
172 * alpha-dis.c: Don't include <stdlib.h>.
173 * arm-dis.c: Include "sysdep.h".
174 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
176 * Makefile.am: Rebuild dependencies.
177 * Makefile.in: Rebuild.
179 1999-06-16 Nick Clifton <nickc@cygnus.com>
181 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
184 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
186 * arm-dis.c (arm_regnames): Turn into a pointer to a register
188 (arm_regnames_standard): New variable: Array of ARM register
189 names according to ARM instruction set nomenclature.
190 (arm_regnames_apcs): New variable: Array of ARM register names
191 according to ARM Procedure Call Standard.
192 (arm_regnames_raw): New variable: Array of ARM register names
193 using just 'r' and the register number.
194 (arm_toggle_regnames): New function: Toggle the chosen register set
196 (parse_disassembler_options): New function: Parse any target
197 disassembler command line options.
198 (print_insn_big_arm): Call parse_disassembler_options if any
200 (print_insn_little_arm): Call parse_disassembler_options if any
203 1999-06-13 Ian Lance Taylor <ian@zembu.com>
205 * i386-dis.c (FWAIT_OPCODE): Define.
206 (used_prefixes): New static variable.
207 (fetch_data): Don't print an error message if we have already
208 fetched some bytes successfully.
209 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
210 (prefix_name): New static function.
211 (print_insn_i386): If setjmp fails, indicating a data error, but
212 we have managed to fetch some bytes, print the first one as a
213 prefix or a .byte pseudo-op. If fwait is followed by a non
214 floating point instruction, print the first prefix. Set
215 used_prefixes when prefixes are used. If any prefixes were not
216 used after disassembling the instruction, print the first prefix
217 instead of printing the instruction.
218 (putop): Set used_prefixes when prefixes are used.
219 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
220 (OP_DIR, OP_SIMD_Suffix): Likewise.
222 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
224 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
225 Support signx %reg, clruw %reg.
227 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
229 * sparc-opc.c: Add aliases Solaris as supports.
231 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
233 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
234 * Makefile.in: Regenerated.
236 1999-06-03 Philip Blundell <philb@gnu.org>
238 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
239 when target is PC-relative.
241 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
243 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
246 * m68k-dis.c (fetch_arg): Add places `n', `o'.
248 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
249 Add mcf5206e to appropriate instructions.
250 Add alias for MAC, MSAC.
252 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
255 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
256 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
258 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
260 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
262 * i386-dis.c (Ed): Define.
263 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
265 (OP_rm): Rename to OP_Rd.
268 (putop): Add const to template and p.
269 (print_insn_x86): Delete.
270 (print_insn_i386): Merge old function print_insn_x86. Add const
272 (struct dis386): Add const to name.
273 (dis386_att, dis386_intel): Add const.
274 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
275 (names32, names16, names8, names_seg, index16): Add const.
276 (grps, prefix_user_table, float_reg): Add const.
277 (float_mem_att, float_mem_intel): Add const.
278 (oappend): Add const to s.
279 (OP_REG): Add const to s.
280 (ptr_reg): Add const to s.
281 (dofloat): Add const to dp.
282 (OP_C): Don't skip modrm, it's now done in OP_Rd.
285 (OP_Rd): Check for valid mod. Call Op_E to print.
286 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
287 (OP_MS): Check for valid mod. Call Op_EM to print.
288 (OP_3DNowSuffix): Set obufp and use oappend rather than
289 strcat. Call BadOp() for errors.
290 (OP_SIMD_Suffix): Likewise.
291 (BadOp): New function.
293 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
295 * i386-dis.c (dis386_intel): Remove macro chars, except for
296 jEcxz. Change cWtR and cRtd to cW and cR.
297 (dis386_twobyte_intel): Remove macro chars here too.
298 (putop): Handle R and W macros for intel mode.
300 * i386-dis.c (SIMD_Fixup): New function.
301 (dis386_twobyte_att): Use it on movlps and movhps, and change
302 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
303 (dis386_twobyte_intel): Same here.
305 * i386-dis.c (Av): Remove.
309 (OP_SIMD_Suffix): New function.
310 (OP_DIR): Remove dead code.
311 (eAX_reg..eDI_reg): Renumber.
312 (onebyte_has_modrm): Table numbering comments.
313 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
314 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
315 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
316 and handle SIMD cmp insns in OP_SIMD_Suffix.
317 (info->bytes_per_line): Bump from 5 to 6.
319 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
320 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
322 PIII SIMD support from Doug Ledford <dledford@redhat.com>
323 * i386-dis.c (XM, EX, None): Define.
324 (OP_XMM, OP_EX, OP_None): New functions.
325 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
326 (GRP14): Rename to GRPAMD.
327 (GRP*): Add USE_GROUPS flag.
329 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
330 (twobyte_has_modrm): Add SIMD entries.
331 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
332 (grps): Add SIMD insns.
333 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
334 oappend repz if uses_f3_prefix. Add code to handle new groups for
337 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
338 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
339 operand from Av to Jv.
341 1999-05-07 Nick Clifton <nickc@cygnus.com>
343 * mcore-dis.c (print_insn_mcore): Use .short to display
344 unidentified instructions, not .word.
346 1999-04-26 Tom Tromey <tromey@cygnus.com>
348 * aclocal.m4, configure: Updated for new version of libtool.
350 1999-04-14 Doug Evans <devans@casey.cygnus.com>
352 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
353 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
355 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
357 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
360 1999-04-10 Doug Evans <devans@casey.cygnus.com>
362 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
363 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
365 1999-04-06 Ian Lance Taylor <ian@zembu.com>
367 * opintl.h (LC_MESSAGES): Never define.
369 1999-04-04 Ian Lance Taylor <ian@zembu.com>
371 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
372 (separator_char, scale_char): Likewise.
373 (print_insn_x86): Likewise.
374 (print_insn_i386): Likewise. Add declaration.
376 1999-03-26 Doug Evans <devans@casey.cygnus.com>
378 * fr30-dis.c: Rebuild.
379 * m32r-dis.c: Rebuild.
381 1999-03-23 Ian Lance Taylor <ian@zembu.com>
383 * m68k-opc.c: Change compare instructions to use "@s" rather than
384 ";s" when used with an immediate operand.
386 1999-03-22 Doug Evans <devans@casey.cygnus.com>
388 * cgen-opc.c (cgen_set_cpu): Delete.
389 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
390 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
392 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
394 * po/opcodes.pot: Rebuild.
396 1999-03-16 Martin Hunt <hunt@cygnus.com>
398 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
400 1999-03-11 Doug Evans <devans@casey.cygnus.com>
402 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
403 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
404 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
405 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
406 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
407 * m32r-opinst.c: Rebuild.
409 1999-02-25 Doug Evans <devans@casey.cygnus.com>
411 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
412 (cgen_hw_lookup_by_num): Rewrite.
413 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
414 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
415 * m32r-opinst.c: Rebuild.
417 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
419 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
420 (insert_jhint): Fix insertion mask.
421 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
423 1999-02-10 Doug Evans <devans@casey.cygnus.com>
425 * Makefile.in: Rebuild.
427 1999-02-09 Doug Evans <devans@casey.cygnus.com>
429 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
430 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
431 * Makefile.am: Remove references to them.
432 (HFILES): Add fr30-desc.h,m32r-desc.h.
433 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
435 (ALL_MACHINES): Update.
436 * configure.in: Redo handling of cgen_files.
437 (bfd_i960_arch): Delete i960c-*.lo files.
438 * configure: Regenerate.
439 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
440 (hash_insn_array): Rewrite.
441 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
442 (hash_insn_array): Rewrite.
443 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
444 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
445 (cgen_lookup_get_insn_operands): Ditto.
446 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
447 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
448 * po/POTFILES.in: Rebuild.
449 * po/opcodes.pot: Rebuild.
451 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
453 * Makefile.am: Rebuild dependencies.
454 (HFILES): Add fr30-opc.h.
455 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
456 * Makefile.in: Rebuild.
458 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
459 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
461 * acconfig.h: Remove.
462 * configure: Rebuild with current autoconf/automake.
463 * aclocal.m4: Likewise.
464 * config.in: Likewise.
465 * Makefile.in: Likewise.
467 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
469 * m68k-opc.c: Correct move (not movew) to status word on 5200.
471 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
473 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
474 * i386-dis.c (x_mode): Define.
478 (dis386_twobyte): Remove.
479 (dis386_twobyte_att): New.
480 (dis386_twobyte_intel): New.
481 (print_insn_x86): Use new arrays.
483 (float_mem_intel): New.
484 (float_mem_att): New.
485 (dofloat): Use new float_mem arrays.
486 (print_insn_i386_att): New.
487 (print_insn_i386_intel): New.
488 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
489 (putop): Handle intel syntax.
490 (OP_indirE): Handle intel syntax.
491 (OP_E): Handle intel syntax.
492 (OP_I): Handle intel syntax.
493 (OP_sI): Handle intel syntax.
494 (OP_OFF): Handle intel syntax.
498 1999-01-27 Doug Evans <devans@casey.cygnus.com>
500 * fr30-opc.h,fr30-opc.c: Rebuild.
501 * i960c-opc.h,i960c-opc.c: Rebuild.
502 * m32r-opc.c: Rebuild.
504 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
506 * hppa-dis.c: revert HP merge changes until HP gives us
509 1999-01-19 Nick Clifton <nickc@cygnus.com>
511 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
512 offsets as well as symbloic address.
514 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
516 * hppa-dis.c: fix comments and some indentation.
518 1999-01-12 Doug Evans <devans@casey.cygnus.com>
520 * fr30-opc.c,i960c-opc.c: Regenerate.
522 1999-01-11 Doug Evans <devans@casey.cygnus.com>
524 * fr30-opc.c: Regenerate.
526 1999-01-06 Doug Evans <devans@casey.cygnus.com>
528 * m32r-dis.c: Regenerate.
530 1999-01-05 Doug Evans <devans@casey.cygnus.com>
532 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
533 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
534 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
536 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
538 * configure.in: Require autoconf 2.12.1 or higher.
540 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
542 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
544 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
546 * fr30-opc.c: Regenerated.
548 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
550 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
552 1998-12-15 Dave Brolley <brolley@cygnus.com>
554 * fr30-opc.c,fr30-opc.h: Regenerated.
556 1998-12-14 Dave Brolley <brolley@cygnus.com>
558 * fr30-opc.c,fr30-opc.h: Regenerated.
560 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
562 * fr30-opc.c,fr30-opc.h: Regenerated.
564 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
566 * m32r-opc.c: Regenerate.
568 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
570 * dis-buf.c (generic_strcat_address): reformat to GNU coding
571 conventions. change sprintf call to an sprintf_vma call.
573 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
575 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
577 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
579 The following changes were made by
580 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
581 David Taylor <taylor@texas.cygnus.com>, and
582 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
583 merge in changes by HP; HP did not create ChangeLog entries.
585 * dis-buf.c (generic_strcat_address): new function.
587 * hppa-dis.c: Changes to improve hppa disassembly.
588 Changed formatting in : reg_names, fp_reg_names,control_reg,
589 New variables : sign_extension_names, deposit_names, conversion_names
590 float_test_names, compare_cond_names_double, add_cond_names_double,
591 logical_cond_names_double, unit_cond_names_double,
592 branch_push_pop_names, saturation_names, shift_names, mix_names,
593 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
594 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
595 (fput_const): renamed as fput_hex_const
597 - use the macros fputs_filtered and
598 fput_decimal_const whenever possible; calls to sign_extend require
599 2 params -- add a missing second param of 0.
600 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
601 architecture version number of current machine. HP folks are
602 trying to handle situation where the target program was compiled
603 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
605 - added new cases : 'g', 'B', 'm'
606 - added cases specifically for PA 2.0
607 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
608 - calls to fput_const become calls to fput_hex_const
610 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
612 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
613 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
614 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
615 * Makefile.in: Rebuilt.
616 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
618 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
619 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
621 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
623 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
625 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
627 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
629 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
630 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
632 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
634 * fr30-opc.c: Regenerate.
636 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
638 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
640 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
642 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
644 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
646 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
648 1998-11-30 Doug Evans <devans@casey.cygnus.com>
650 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
651 CGEN_INSN_BASE_VALUE.
652 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
653 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
655 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
657 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
659 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
661 * fr30-asm.c,fr30-dis.c: Regenerated.
663 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
665 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
667 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
669 * fr30-opc.c: Regenerated.
671 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
673 * fr30-opc.c: Regenerated.
674 * fr30-opc.h: Regenerated.
675 * fr30-dis.c: Regenerated.
676 * fr30-asm.c: Regenerated.
678 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
680 * mips-opc.c (sync.p,sync.l): Swap insn values.
682 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
684 * fr30-opc.c: Regenerate.
686 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
688 * fr30-opc.c: Regenerated.
689 * fr30-opc.h: Regenerated.
691 1998-11-18 Doug Evans <devans@casey.cygnus.com>
693 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
694 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
696 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
698 * fr30-opc.c: Regenerated.
700 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
702 * fr30-opc.c: Regenerated.
703 * fr30-opc.h: Regenerated.
704 * fr30-dis.c: Regenerated.
705 * fr30-asm.c: Regenerated.
707 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
709 * po/opcodes.pot: Regenerated.
710 * fr30-opc.c: Regenerated.
711 * fr30-opc.h: Regenerated.
712 * fr30-dis.c: Regenerated.
713 * fr30-asm.c: Regenerated.
715 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
717 * disassemble.c (disassembler): Add support for FR30 target.
719 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
721 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
722 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
724 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
726 * po/opcodes.pot: Regenerate.
727 * po/POTFILES.in: Regenerate.
728 * fr30-opc.c: Regenerate.
729 * fr30-opc.h: Regenerate.
731 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
733 * m32r-asm.c: Regenerate.
735 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
737 * configure.in: Added case for bfd_fr30_arch.
738 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
739 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
740 (CLEANFILES): Added stamp-fr30.
742 * fr30-asm.c: New file.
743 * fr30-dis.c: New file.
744 * fr30-opc.c: New file.
745 * fr30-opc.h: New file.
746 * po/POTFILES.in: Regenerated
747 * po/opcodes.pot: Regenerated
749 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
751 * configure.in: detect cygwin* instead of cygwin32*
752 * configure: regenerate
754 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
756 * mips-opc.c (IS_M): Added.
758 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
760 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
762 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
764 * m32r-opc.h,m32r-opc.c: Regenerate.
766 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
768 * i386-dis.c (OP_3DNowSuffix): New static function.
771 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
772 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
773 (insn_codep): New static variable.
774 (print_insn_x86): Init insn_codep after prefixes.
775 (grps): Add GRP14 entries for prefetch, prefetchw.
778 From Jeff B Epler <jepler@usgs.gov>
779 * i386-dis.c (Suffix3DNow): New table.
781 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
783 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
785 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
787 * d10v-dis.c (print_operand): If num is nonzero, then
788 add OPERAND_ACC1, not OPERAND_ACC0.
790 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
792 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
795 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
797 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
800 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
802 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
804 1998-09-09 Michael Meissner <meissner@cygnus.com>
806 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
809 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
811 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
813 (print_insn_little_arm): Detect Thumb symbols in elf object
816 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
818 * alpha-dis.c (print_insn_alpha): Use the machine type to
819 decide which PALcode set to include.
821 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
823 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
825 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
827 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
828 MSUB and MSUBS instructions.
830 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
832 * ppc-opc.c (powerpc_operands): Omit parens around additions in
835 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
837 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
838 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
839 +, -, and d for ColdFire.
841 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
842 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
843 (extract_mbe): Likewise.
845 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
847 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
849 * m10300-opc.c: First cut at UDF instructions.
851 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
853 * m32r-opc.c: Regenerate (remove semantic descriptions).
855 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
857 * arm-dis.c (print_insn_big_arm): Fix indentation.
858 (print_insn_little_arm): Likewise.
860 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
862 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
864 (print_insn_little_arm): Likewise.
866 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
868 Move all global state data into opcode table struct, and treat
869 opcode table as something that is "opened/closed".
870 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
871 (cgen_asm_init): Delete.
872 (cgen_set_parse_operand_fn): New function.
873 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
874 (cgen_dis_init): Delete.
875 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
876 (cgen_current_{opcode_table_mach,endian}): Delete.
877 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
879 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
881 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
884 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
886 * m10300-opc.c: Add entries for "no_match_operands" field in
889 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
891 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
893 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
895 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
897 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
899 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
901 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
903 (OP_J): Remove unnecessary subtraction when 16-bit displacement
904 will be masked later.
906 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
908 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
910 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
912 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
914 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
916 * m10300-dis.c: Only recognize instructions from the currently
918 * m10300-opc.c: Add field indicating the particular variant of
919 the mn10300 each instruction is available on.
921 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
923 * configure.in: For bfd_vax_arch, build vax-dis.lo.
924 * Makefile.am: Rebuild dependencies.
925 (CFILES): Add vax-dis.c.
926 (ALL_MACHINES): Add vax-dis.lo.
927 * aclocal.m4: Rebuild with current libtool.
928 * configure, Makefile.in: Rebuild.
930 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
932 * vax-dis.c: New file, from work by Pauline Middelink
933 <middelin@polyware.iaf.nl>.
934 * disassemble.c (ARCH_vax): Define if ARCH_all.
935 (disassembler): Add case for ARCH_vax.
936 * makefile.vms: Support compilation on vms/vax.
938 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
940 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
941 related to sign extension and the size of ints.
943 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
945 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
946 instructions. Support (sp) addressing mode by expanding it into
949 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
951 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
953 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
955 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
957 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
959 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
962 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
964 * mips-dis.c (print_insn_little_mips): Previously, instruction
965 printing references the symbol table to determine whether the
966 instruction resides in a block regular instructions or mips16
967 instructions. However, when the disassembler gets used in other
968 environments where the symbol table is not present, we no longer
969 rely in the symbol table, rather, use the low bit of the
970 instructions address to guess. There should be no change for usage
971 of the disassembler in host based programs, gdb, objdump.
972 (print_insn_big_mips): ditto.
973 (print_insn_mips): ditto
975 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
977 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
979 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
981 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
983 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
985 * i386-dis.c (index16): Add '%' to register names. Use ','
988 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
990 * i386-dis.c: Don't print opcode suffix when we can figure out the
991 size (and gas can!) by register operands, or from the default
993 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
995 (dis386, dis386_twobyte, grps): Use new suffix macros.
996 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
997 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
998 order of cmps operands to agree with Intel docs. Correct operand
999 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1000 agree with Intel docs.
1001 (print_insn_x86): Print orphan fwait before other prefixes.
1002 Return correct byte count for orphan fwait with prefixes. Don't
1003 print `bound' operands in reverse order.
1004 (ckprefix): Stop accumulating prefixes if we get fwait.
1005 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1007 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1009 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1010 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1012 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1014 Fix problems when bfd_vma is wider than long.
1015 * i386-dis.c: Make op_address and start_pc unsigned.
1016 (set_op): Make parameter unsigned.
1017 (print_insn_x86): Cast to bfd_vma when passing a value to
1019 * ns32k-dis.c (CORE_ADDR): Don't define.
1020 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1021 bfd_scan_vma to read back address.
1022 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1024 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1025 (NEXTULONG): New definition.
1026 (print_insn_m68k): Avoid overflow when computing third argument of
1028 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1029 Use disp instead of val to store offset values.
1030 (print_indexed): Use base_disp instead of word to store base
1031 displacement, to avoid overflow.
1032 * m10300-dis.c (disassemble): Cast value to long when computing
1033 pc-relative address, to get correct sign extension.
1035 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1037 * m32r-opc.c: Regenerate.
1039 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1041 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1042 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1044 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1046 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1048 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1050 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1052 (OP_DSreg): Rename from OP_DSSI.
1053 (OP_ESreg): Rename from OP_ESDI.
1054 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1056 (append_seg): Rename from append_prefix.
1057 (ptr_reg): New function.
1058 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1060 (PREFIX_ADDR): Rename from PREFIX_ADR.
1061 (float_reg): Add non-broken opcodes for people who don't want
1064 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1066 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1069 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1071 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1073 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1075 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1076 0; produce error message for shifts of size 32 (or 64 for 64-bit
1077 shifts), because the hardware doesn't support them.
1079 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1081 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1082 LONG_2, LONG_2b formats to use this new operand.
1084 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1086 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1088 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1090 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1091 endian data support.
1093 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1095 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1096 and SHORT_B3b formats to use Rb instead of Ra.
1098 Add FLAG_MUL16 to MUL2XH opcode.
1100 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1101 to existing 1.1.1 parallelisation prohibition procedure.
1103 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1105 * m32r-asm.c,m32r-dis.c: Regenerate.
1107 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1109 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1110 with a shift count of 0.
1112 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1114 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1115 (cgen_hw_lookup_by_num): New function.
1117 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1119 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1121 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1123 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1124 as big-endian on SPARClite.
1126 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1128 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1130 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1132 * po/Make-in (install-info): New target.
1134 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1136 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1137 * configure: Rebuild.
1139 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1141 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1142 variety of ISA2 instructions to set bottom ten bits of trap code.
1144 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1146 * Makefile.am (config.status): Add explicit target so that
1147 config.status depends upon bfd/configure.in.
1148 * Makefile.in: Rebuild.
1150 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1152 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1153 instructions to set bottom ten bits of break code.
1154 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1155 for above optional argument.
1157 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1159 * makefile.vms: Run dec c with /nodebug.
1161 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1163 * Makefile.in: Rebuilt.
1164 * Makefile.am: Regenerated dependencies with mkdep.
1166 * opintl.h (_): Define as dgettext.
1168 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1170 * cgen-asm.c: Internationalised.
1171 * m32r-asm.c: Internationalised.
1172 * m32r-dis.c: Internationalised.
1173 * m32r-opc.c: Internationalised.
1175 * aclocal.m4: Regenerated.
1176 * configure: Regenerated.
1177 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1178 * Makefile.in: Rebuild.
1179 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1180 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1182 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1184 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1186 * aclocal.m4, configure: Rebuild with current tools.
1188 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1190 * opintl.h: New file - contains internationalisation macros used
1191 by source files in this directory.
1192 * po/: New subdirectory - contains internationalisation files.
1193 * po/Make-in: New file - Makefile constructor.
1194 * po/POTFILES.in: New file - list of files in opcodes directory
1195 that should be scan for internationalisation macros.
1196 * po/opcodes.pot: New file - list of internationisation strings
1197 found in files mentioned in po/POTFILES.in.
1198 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1199 entry. Add intl directory to include paths.
1200 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1201 HAVE_STRCPY, HAVE_LC_MESSAGES
1202 * configure.in: Add rule to build Makefile in po subdirectory.
1203 * Makefile.in: Rebuilt.
1204 * aclocal.m4: Rebuilt.
1205 * config.in: Rebuilt.
1206 * configure: Rebuilt.
1207 * alpha-opc.c: Internationalised.
1208 * arc-dis.c: Internationalised.
1209 * arc-opc.c: Internationalised.
1210 * arm-dis.c: Internationalised.
1211 * cgen-asm.c: Internationalised.
1212 * d30v-dis.c: Internationalised.
1213 * dis-buf.c: Internationalised.
1214 * h8300-dis.c: Internationalised.
1215 * h8500-dis.c: Internationalised.
1216 * i386-dis.c: Internationalised.
1217 * m10200-dis.c: Internationalised.
1218 * m10300-dis.c: Internationalised.
1219 * m68k-dis.c: Internationalised.
1220 * m88k-dis.c: Internationalised.
1221 * mips-dis.c: Internationalised.
1222 * ns32k-dis.c: Internationalised.
1223 * opintl.h: Internationalised.
1224 * ppc-opc.c: Internationalised.
1225 * sparc-dis.c: Internationalised.
1226 * v850-dis.c: Internationalised.
1227 * v850-opc.c: Internationalised.
1229 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1231 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1232 (asm_hash_table_entries): New variable.
1233 (cgen_asm_init): Free asm_hash_table_entries.
1234 (hash_insn_array,hash_insn_list): New functions.
1235 (build_asm_hash_table): Use them. Hash macro insns as well.
1236 (cgen_asm_lookup_insn): Update.
1237 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1238 (dis_hash_table_entries): New variable.
1239 (cgen_dis_init): Free dis_hash_table_entries.
1240 (hash_insn_array,hash_insn_list): New functions.
1241 (build_dis_hash_table): Use them. Hash macro insns as well.
1242 (cgen_dis_lookup_insn): Update.
1243 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1244 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1245 (cgen_macro_insn_count): New function.
1246 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1248 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1250 * i386-dis.c (OP_DSSI): Print segment override.
1252 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1254 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1257 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1259 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1260 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1261 * configure.in: Define and substitute WIN32LDFLAGS and
1263 * aclocal.m4: Rebuild with new libtool.
1264 * configure, Makefile.in: Rebuild.
1266 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1268 * m32r-opc.c: Regenerate.
1270 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1272 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1273 before trying to copy it.
1274 * Makefile.in: Rebuild.
1276 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1278 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1280 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1282 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1283 from an arbitrary valid buffer instead of fetching them on demand
1285 (invalid_float): use bit_extract_simple() instead of bit_extract().
1287 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1289 From H.J. Lu <hjl@gnu.org>:
1290 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1293 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1295 * Branched binutils 2.9.
1297 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1299 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1300 disassembling last 4 bytes of a section.
1302 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1304 Fix some gcc -Wall warnings:
1305 * arc-dis.c (print_insn): Add casts to avoid warnings.
1306 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1307 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1308 * m10200-dis.c (disassemble): Likewise.
1309 * m10300-dis.c (disassemble): Likewise.
1310 * ns32k-dis.c (print_insn_ns32k): Likewise.
1311 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1312 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1313 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1314 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1315 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1316 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1317 * tic80-dis.c (print_one_instruction): Likewise.
1318 * w65-dis.c (print_operand): Likewise.
1319 * z8k-dis.c (fetch_data): Likewise.
1320 * a29k-dis.c: Add return type for find_byte_func_type.
1321 * arc-opc.c: Include <stdio.h>. Remove declarations of
1322 insert_multshift and extract_multshift.
1323 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1325 (extract_value): Fully parenthesize expression.
1326 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1327 * h8500-opc.h (h8500_table): Fully bracket initializer.
1328 * w65-opc.h (optable): Likewise.
1329 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1330 * i386-dis.c (OP_E): Initialize local variables.
1331 * m10200-dis.c (print_insn_mn10200): Likewise.
1332 * mips-dis.c (print_insn_mips16): Likewise.
1333 * sh-dis.c (print_insn_shx): Likewise.
1334 * v850-dis.c (print_insn_v850): Likewise.
1335 * ns32k-dis.c (print_insn_arg): Declare.
1336 (get_displacement, invalid_float): Declare.
1337 (list_search, sign_extend, flip_bytes): Declare return type.
1338 (get_displacement): Likewise.
1339 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1341 (print_insn_ns32k): Make i unsigned.
1342 (invalid_float): Make static. Declare type of val.
1343 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1344 on each for iteration.
1345 * tic30-dis.c (get_indirect_operand): Likewise.
1346 * z8k-dis.c (print_insn_z8001): Declare return type.
1347 (print_insn_z8002): Likewise.
1348 (unparse_instr): Fix sprintf format strings.
1350 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1352 * mips-opc.c: Add "sync.l" and "sync.p".
1354 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1356 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1357 default m68k variant to recognize.
1359 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1360 (ctrl, cobr, mem, ea): Likewise.
1361 (print_addr): Likewise. Remove cast.
1362 (ea): Cast argument of print_addr to bfd_vma.
1364 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1366 (cgen_parse_unsigned_integer): Likewise.
1367 (cgen_parse_address): Likewise.
1369 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1371 * i960-dis.c (ctrl): Add full braces to structure initialization.
1372 (cobr, mem, reg): Likewise.
1373 (ea): Correct parenthesization in expression.
1375 * cgen-asm.c: Include <ctype.h>.
1376 (build_asm_hash_table): Remove unused local variable i.
1377 (cgen_parse_keyword): Add casts to avoid warnings.
1379 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1380 symbol. Fix indentation.
1381 (print_insn_little_arm): Likewise.
1383 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1385 * configure.in: Use AM_DISABLE_SHARED.
1386 * aclocal.m4, configure: Rebuild with libtool 1.2.
1388 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1390 These patches are courtesy of Jonathan Walton and Tony Thompson
1391 (athompso@cambridge.arm.com).
1393 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1396 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1397 both the offset and the label closest to the destination.
1399 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1401 * m32r-opc.h: Regenerate.
1403 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1405 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1407 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1409 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1410 assume that info->symbols is non-empty.
1412 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1414 * alpha-opc.c (cvtqs) There is no such thing.
1415 (cvttq): Missing most of the /*d variants.
1417 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1419 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1420 delayed branches or jumps.
1422 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1424 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1426 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1427 * tic30-dis.c (print_branch): Likewise.
1429 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1431 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1432 saved_symbol code as it is no longer needed.
1434 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1436 * cgen-asm.c: Include symcat.h.
1437 * cgen-dis.c,cgen-opc.c: Ditto.
1438 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1440 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1442 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1444 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1446 * m32r-opc.[ch]: Regenerate.
1448 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1450 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1451 arguments. Don't perform validation here.
1452 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1454 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1456 * m32r-opc.c: Regenerate.
1458 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1460 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1461 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1463 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1465 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1467 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1469 * configure.in: Get the version number from BFD.
1470 * configure: Rebuild.
1472 From H.J. Lu <hjl@gnu.org>:
1473 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1474 * Makefile.in: Rebuild.
1476 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1478 * m32r-opc.c: Regenerate.
1479 * m32r-opc.h: Regenerate.
1481 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1483 * m32r-opc.c: Regenerate.
1485 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1487 Fix rac to accept only a0:
1488 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1489 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1490 Introduce OPERAND_GPR.
1491 * d10v-dis.c (print_operand): Likewise.
1493 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1495 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1496 (cgen_hw_lookup): Make result const.
1497 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1499 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1501 * configure, aclocal.m4: Rebuild with new libtool.
1503 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1505 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1506 instructions use a PC relative branch, not absolute.
1508 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1510 * configure.in: Set libtool_enable_shared rather than
1511 libtool_shared. Remove diversion hack.
1512 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1514 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1516 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1517 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1519 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1521 * tic30-dis.c: New file.
1522 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1523 * configure.in: Handle bfd_tic30_arch.
1524 * Makefile.am: Rebuild dependencies.
1525 (CFILES): Add tic30-dis.c
1526 (ALL_MACHINES): Add tic30-dis.lo.
1527 * configure, Makefile.in: Rebuild.
1529 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1531 * m32r-opc.h (HAVE_CPU_M32R): Define.
1533 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1535 * v850-opc.c (insertion routines): If both alignment and size is
1536 wrong then report this.
1538 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1540 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1541 Only recognize instructions for the current target_processor.
1543 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1545 * d10v-dis.c (PC_MASK): Correct value.
1546 (print_operand): If there's a reloc, don't calculate the
1547 address because they could be in different sections.
1549 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1551 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1552 instruction after the 4650's "mul" instruction; nobody's using the
1553 4010 these days. If object files someday indicate which processor
1554 variant they're intended for, we can do a better job at this.
1556 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1558 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1559 table provided entry size. Use CGEN_INSN_MNEMONIC.
1560 (cgen_parse_keyword): Rewrite.
1561 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1562 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1563 * cgen-opc.c: Clean up pass over `struct foo' usage.
1564 (cgen_keyword_lookup_value): Handle "" entry.
1565 (cgen_keyword_add): Likewise.
1567 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1569 * mips-opc.c: Add FP_D to s.d instruction flags.
1571 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1573 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1575 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1577 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1578 PC relative offset forms before the 15 bit forms. An assembler command
1579 line option now chooses the default.
1581 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1583 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1584 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1586 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1588 * configure: Only build libopcodes shared if --enable-shared's value
1589 was `yes', or was set to `*opcodes*'.
1590 * aclocal.m4: Likewise.
1591 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1592 original source of this bit of code. It's not clear what the best fix
1595 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1597 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1598 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1599 offset forms before the 15 bit forms, to default to the long forms.
1601 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1603 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1605 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1607 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1608 symbol if none is present.
1609 (print_insn_big_arm): Prevent examination of stored symbol if
1612 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1614 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1616 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1618 * disassemble.c: Remove disasm_symaddr() function.
1620 * arm-dis.c: Use info->symbol instead of info->flags to determine
1621 if disassmbly should be in Thumb or Arm mode.
1623 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1625 * arm-dis.c: Add support for disassembling Thumb opcodes.
1626 (print_insn_thumb): New function.
1628 * disassemble.c (disasm_symaddr): New function.
1630 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1631 (thumb_opcodes): Table of Thumb opcodes.
1633 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1635 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1637 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1638 and 'v' as operand types.
1640 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1642 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1643 <olivier.carmona@di.epfl.ch>.
1644 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1645 which has a two word opcode with a one word argument.
1647 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1649 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1650 unsigned, not signed.
1651 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1653 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1655 * d10v-dis.c (print_operand):
1656 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1658 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1660 * d10v-opc.c (OPERAND_FLAG): Split into:
1661 (OPERAND_FFLAG, OPERAND_CFLAG) .
1665 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1667 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1668 field for all INSN_MACRO's.
1669 * mips16-opc.c: same
1671 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1673 * mips-opc.c (sync,cache): These are 3900 insns.
1675 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1677 sh-opc.h (sh_table): Remove ftst/nan.
1679 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1681 * mips-opc.c (ffc, ffs): Fix mask.
1683 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1685 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1688 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1690 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1691 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1693 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1695 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1696 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1698 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1700 * v850-dis.c (disassemble): Replace // with /* ... */
1702 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1704 * sparc-opc.c: Add wr & rd for v9a asr's.
1705 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1706 (v9a_asr_reg_names): New variable.
1707 Patch from David Miller <davem@vger.rutgers.edu>.
1709 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1711 * sparc-opc.c (v9notv9a): New insn type.
1712 (IMPDEP): Move to the end to not conflict with edge8 et al.
1713 Patch from David Miller <davem@vger.rutgers.edu>.
1715 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1717 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1719 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1721 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1723 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1725 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1726 of disassemble_info structure to determine if an overlay address
1727 has a matching symbol in low memory.
1729 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1730 new symbol_at_address_func field in disassemble_info structure.
1732 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1734 * v850-opc.c (extract_d22): Use signed arithmatic.
1736 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1738 * mips-opc.c: Three op mult is not an ISA insn.
1740 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1742 * mips-opc.c: Fix formatting.
1744 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1747 than assuming that char is signed. Explicitly sign extend 16 bit
1748 values, rather than assuming that short is 16 bits.
1749 (OP_sI, OP_J, OP_DIR): Likewise.
1751 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1753 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1756 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1758 * v850-opc.c: Fix typo in comment.
1760 * v850-dis.c (disassemble): Add test of processor type when
1761 determining opcodes.
1763 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1765 * configure.in: Use a diversion to set enable_shared before the
1766 arguments are parsed.
1767 * configure: Rebuild.
1769 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1771 * m68k-opc.c (TBL1): Use ! rather than `.
1772 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1774 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1776 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1778 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1780 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1783 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1784 * aclocal.m4: Rebuild with new libtool.
1785 * configure: Rebuild.
1787 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1789 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1791 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1793 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1795 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1797 * v850-opc.c (v850_opcodes): Further rearrangements.
1799 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1801 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1803 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1805 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1808 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1810 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1812 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1814 * v850-opc.c: Initialise processors field of v850_opcode structure.
1816 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1818 Merge changes from Martin Hunt:
1820 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1822 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1823 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1824 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1826 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1828 * d30v-dis.c (print_insn): First operand of d*i (delayed
1829 branch) instructions is relative.
1831 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1832 (d30v_operand_table): Add IMM6S3 type.
1833 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1835 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1836 and cmp instructions.
1838 * d30v-opc.c: Correct entries for repeat*, and sat*.
1839 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1840 types. Correct several formats.
1842 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1844 * d30v-opc.c (pre_defined_registers): Change control registers.
1846 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1847 SHORT_C2. Manual was incorrect.
1849 * d30v-dis.c (lookup_opcode): Return value now indicates
1850 if an opcode has a short and a long form. Used for deciding
1851 to append a ".s" or ".l".
1852 (print_insn): Append a ".s" to an instruction if it is
1853 the short form and ".l" if it is a long form. Do not append
1854 anything if the instruction has only one possible size.
1856 * d30v-opc.c: Change mulx2h to require an even register.
1857 New form: SHORT_A2; a SHORT_A form that needs an even
1858 register as the first operand.
1860 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1861 instruction was not being disassembled if there were an odd
1862 number of instructions.
1864 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1866 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1868 * v850-dis.c (disassemble): Improved display of register lists.
1870 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1872 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1873 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1874 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1875 fandnot1s, fandnot2s.
1877 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1879 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1881 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1883 * cgen-asm.c (cgen_parse_address): New argument resultp.
1884 All callers updated.
1885 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1887 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1889 * mn10200-dis.c (disassemble): PC relative instructions are
1890 relative to the next instruction, not the current instruction.
1892 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1894 * v850-dis.c (disassemble): Only signed extend values that are not
1895 returned by extract functions.
1896 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1898 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1900 * v850-opc.c: Update comments. Remove use of
1901 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1903 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1905 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1907 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1909 * configure: Rebuilt with latest devo autoconf for NT support.
1911 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1913 * v850-dis.c (disassemble): Use curly brace syntax for register
1916 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1917 where r0 is being used as a destination register.
1919 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1921 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1923 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1925 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1927 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1929 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1930 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1933 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1935 * configure (cgen_files): Add support for v850e target.
1936 * configure.in (cgen_files): Add support for v850e target.
1938 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1940 * configure (cgen_files): Add support for v850ea target.
1941 * configure.in (cgen_files): Add support for v850ea target.
1943 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1945 * configure.in (bfd_arc_arch): Add.
1946 * configure: Rebuild.
1947 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1948 * Makefile.in: Rebuild.
1949 * arc-dis.c, arc-opc.c: New files.
1950 * disassemble.c (ARCH_all): Define ARCH_arc.
1951 (disassembler): Add ARC support.
1953 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1955 * v850-dis.c (disassemble): Add support for v850EA instructions.
1957 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1958 (v850_opcodes): Add v850EA instructions.
1960 * v850-dis.c (disassemble): Add support for v850E instructions.
1962 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1963 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1964 insert_spe, extract_spe): New Functions.
1965 (v850_opcodes): Add v850E instructions.
1967 * v850-opc.c: Reorganised and re-layed out to improve readability
1970 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1972 * configure: Rebuild with autoconf 2.12.1.
1974 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1976 * aclocal.m4, configure: Rebuild with new automake patches.
1978 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1980 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1981 * acinclude.m4: Just include acinclude.m4 from BFD.
1982 * aclocal.m4, configure: Rebuild.
1984 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1986 * Makefile.am: New file, based on old Makefile.in.
1987 * acconfig.h: New file.
1988 * acinclude.m4: New file.
1989 * stamp-h.in: New file.
1990 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1991 Removed shared library handling; now handled by libtool. Replace
1992 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1993 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1994 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1995 handling in AC_OUTPUT.
1996 * dep-in.sed: Change .o to .lo.
1997 * Makefile.in: Now built with automake.
1998 * aclocal.m4: Now built with aclocal.
1999 * config.in, configure: Rebuild.
2001 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2003 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2005 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2007 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2009 * sparc-dis.c (sorted_opcodes): New static local.
2010 (struct opcode_hash): `opcode' is pointer to const element.
2011 (build_hash): First arg is now table of sorted pointers.
2012 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2013 (compare_opcodes): Update.
2015 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2017 * cgen-opc.c: #include <ctype.h>.
2018 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2019 Handle case insensitive hashing.
2020 (hash_keyword_value): Change type of `value' to unsigned int.
2022 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2024 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2025 precision FP, mark it as such. Likewise for double precision
2026 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2029 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2031 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2033 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2034 nesting depth when all the macros are expanded.
2036 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2038 * sparc-opc.c: The fcmp v9a instructions take an integer register
2039 as a destination, not a floating point register. From Christian
2040 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2042 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2044 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2045 syntax. From Roman Hodek
2046 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2048 * i386-dis.c (twobyte_has_modrm): Fix pand.
2050 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2052 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2054 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2056 * arm-dis.c: Add prototypes for arm_decode_shift and
2059 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2061 * mips-opc.c: Add r3900 insns.
2063 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2065 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2066 print delay slot instructions on the same line. When using a PC
2067 relative load, add a comment with the value being loaded if it can
2070 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2072 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2073 to pushS/popS for segment regs and byte constant so that
2074 pushw/popw printed when in 16 bit data mode.
2076 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2077 print cbtw, cwtd in 16 bit data mode.
2078 * i386-dis.c (putop): extra case W to support above.
2080 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2081 address size prefix in 16 bit address mode.
2083 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2085 * sh-dis.c: Reindent. Rename local variable fprintf to
2088 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2090 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2092 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2094 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2096 * mips16-opc.c (mip16_opcodes): same.
2098 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2100 * m68k-opc.c (moveb): Change $d to %d.
2102 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2104 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2105 (twobyte_has_modrm): Likewise.
2107 (OP_MMX, OP_EM, OP_MS): New static functions.
2109 * i386-dis.c: Revert patch of April 4. The output now matches
2112 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2114 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2117 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2119 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2121 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2123 * Makefile.in (install): Depend upon installdirs.
2124 (installdirs): New target.
2126 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2128 From Thomas Graichen <graichen@rzpd.de>:
2129 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2130 * configure: Rebuild.
2132 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2134 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2135 Delete string{,s}.h support.
2137 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2139 * cgen-asm.c (cgen_parse_operand_fn): New global.
2140 (cgen_parse_{{,un}signed_integer,address}): Update call to
2141 cgen_parse_operand_fn.
2142 (cgen_init_parse_operand): New function.
2143 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2144 from cgen_asm_init_parse.
2145 (m32r_cgen_assemble_insn): New operand `errmsg'.
2146 Delete call to as_bad, return error message to caller.
2147 (m32r_cgen_asm_hash_keywords): #if 0 out.
2149 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2151 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2153 [case 'J']: Fix typo in register name.
2155 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2157 * configure.in: Substitute SHLIB_LIBS.
2158 * configure: Rebuild.
2159 * Makefile.in (SHLIB_LIBS): New variable.
2160 ($(SHLIB)): Use $(SHLIB_LIBS).
2162 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2164 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2166 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2168 * disassemble.c (disassembler): Handle m32r.
2170 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2172 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2173 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2174 * Makefile.in (CFILES): Add them.
2175 (ALL_MACHINES): Add them.
2176 (dependencies): Regenerate.
2177 * configure.in (cgen_files): New variable.
2178 (bfd_m32r_arch): Add entry.
2179 * configure: Regenerate.
2181 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2183 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2184 * configure: Rebuild.
2186 * Makefile.in: Rebuild dependencies.
2188 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2190 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2193 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2195 * Branched binutils 2.8.
2197 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2199 * m10200-dis.c: Rename from mn10200-dis.c.
2200 * m10200-opc.c: Rename from mn10200-opc.c.
2201 * m10300-dis.c: Rename from mn10300-dis.c
2202 * m10300-opc.c: Rename from mn10300-opc.c.
2203 * Makefile.in: Update accordingly.
2205 * mips16-opc.c: Add mul and dmul macros.
2207 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2209 * makefile.vms: Update CFLAGS, add clean target.
2211 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2213 * mips-opc.c: Add "wait". From Ralf Baechle
2214 <ralf@gnu.ai.mit.edu>.
2216 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2217 * configure, config.in: Rebuild.
2218 * sysdep.h: Include <stdlib.h> if it exists.
2219 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2221 * Makefile.in: Rebuild dependencies.
2223 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2225 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2226 Andrew Bray <andy@madhouse.demon.co.uk>.
2228 * mips-opc.c: Add cast when setting mips_opcodes.
2230 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2232 * v850-dis.c (disassemble): Fix sign extension problem.
2233 * v850-opc.c (extract_d*): Fix sign extension problems to make
2234 disassembly calculate branch offsets correctly.
2236 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2238 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2240 * mips-opc.c: Add dctr and dctw.
2242 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2244 * d30v-dis.c (print_insn): Change the way signed constants
2247 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2249 * Makefile.in (BFD_H): New variable.
2250 (HFILES): New variable.
2251 (CFILES): Add all C files.
2252 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2253 Delete old dependencies, and build new ones.
2254 * dep-in.sed: New file.
2256 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2258 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2260 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2262 * mn10200-opc.c: Change "trap" to "syscall".
2263 * mn10300-opc.c: Add new "syscall" instruction.
2265 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2267 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2268 mulul insns on the coldfire.
2270 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2272 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2273 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2274 (print_insn_little_arm): Likewise.
2276 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2278 Based on patches from H.J. Lu <hjl@lucon.org>:
2279 * i386-dis.c (fetch_data): Add prototype.
2280 * m68k-dis.c (fetch_data): Add prototype.
2281 (dummy_print_address): Add prototype. Make static.
2282 * ppc-opc.c (valid_bo): Add prototype.
2283 * sparc-dis.c (build_hash_table): Add prototype.
2284 (is_delayed_branch, compute_arch_mask): Add prototypes.
2285 (print_insn_sparc): Make several local variables const.
2286 (compare_opcodes): Change arguments to const PTR. Add prototype.
2287 * sparc-opc.c (arg): Change name field to be const.
2288 (lookup_name, lookup_value): Add prototypes. Change table and
2289 name parameters to be const.
2290 (sparc_encode_asi): Change name parameter to be const.
2291 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2292 (sparc_encode_sparclet_cpreg): Likewise.
2293 (sparc_decode_asi): Change return type to be const.
2294 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2295 (sparc_decode_sparclet_cpreg): Likewise.
2297 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2299 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2300 Solaris doesn't like the combined options, and the -f is
2302 (stamp-tshlink, install): Likewise.
2304 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2306 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2309 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2311 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2313 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2315 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2318 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2320 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2322 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2324 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2326 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2328 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2330 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2332 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2333 floatformat_to_double to make portable.
2334 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2337 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2339 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2340 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2342 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2344 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2345 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2347 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2349 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2350 (OFF_SL_BR_SCALED): ... to this, and added the flag
2351 TIC80_OPERAND_BASEREL to the flags word.
2352 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2355 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2357 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2358 Change mips_opcodes from const array to a pointer,
2359 and change bfd_mips_num_opcodes from const int to int,
2360 so that we can increase the size of the mips opcodes table
2363 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2365 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2366 store BITNUM values in the table in one's complement form
2367 to match behavior when assembler is given a raw numeric
2368 value for a BITNUM operand.
2369 * tic80-dis.c (print_operand_bitnum): Ditto.
2371 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2373 * d30v-opc.c: Removed references to FLAG_X.
2375 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2377 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2379 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2381 * Makefile.in: Added d30v object files.
2382 * configure: (bfd_d30v_arch) Rebuilt.
2383 * configure.in: (bfd_d30v_arch) Added new case.
2384 * d30v-dis.c: New file.
2385 * d30v-opc.c: New file.
2386 * disassemble.c (disassembler) Add entry for d30v.
2388 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2390 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2391 representations for the floating point BITNUM values.
2393 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2395 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2396 in the table in one's complement form, as they appear in the
2398 (tic80_symbol_to_value): Use macros to access predefined
2400 (tic80_value_to_symbol): Ditto.
2401 (tic80_next_predefined_symbol): New function.
2402 * tic80-dis.c (print_operand_bitnum): Remove code that did
2403 one's complement for BITNUM values.
2405 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2407 * makefile.vms: Remove 8 bit characters. Update to latest
2410 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2412 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2414 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2416 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2417 (IMM24_PCREL): Likewise.
2419 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2421 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2422 address for an extended PC relative instruction that is not a
2425 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2427 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2430 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2432 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2433 (tic80_opcodes): Sort entries so that long immediate forms
2434 come after short immediate forms, making it easier for
2435 assembler to select the right one for a given operand.
2437 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2439 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2441 (print_insn_mips16): Likewise.
2443 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2445 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2446 a symbol class that restricts translation to just that
2447 class (general register, condition code, etc).
2449 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2451 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2452 and REG_DEST_E for register operands that have to be
2453 an even numbered register. Add REG_FPA for operands that
2454 are one of the floating point accumulator registers.
2455 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2456 (tic80_opcodes): Change entries that need even numbered
2457 register operands to use the new operand table entries.
2458 Add "or" entries that are identical to "or.tt" entries.
2460 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2462 * mips16-opc.c: Add new cases of exit instruction for
2464 * mips-dis.c (print_mips16_insn_arg): Display floating point
2465 registers in operands of exit instruction. Print `$' before
2466 register names in operands of entry and exit instructions.
2468 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2470 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2471 pairs for all predefined symbols recognized by the assembler.
2472 Also used by the disassembling routines.
2473 (tic80_symbol_to_value): New function.
2474 (tic80_value_to_symbol): New function.
2475 * tic80-dis.c (print_operand_control_register,
2476 print_operand_condition_code, print_operand_bitnum):
2477 Remove private tables and use tic80_value_to_symbol function.
2479 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2481 * d10v-dis.c (print_operand): Change address printing
2482 to correctly handle PC wrapping. Fixes PR11490.
2484 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2486 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2489 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2491 * mips-dis.c (print_insn_mips16): Set insn_info information.
2492 (print_mips16_insn_arg): Likewise.
2494 * mips-dis.c (print_insn_mips16): Better handling of an extend
2495 opcode followed by an instruction which can not be extended.
2497 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2499 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2500 coldfire moveb instruction to not allow an address register as
2501 destination. Although the documentation does not indicate that
2502 this is invalid, experiments uncovered unexpected behavior.
2503 Added a comment explaining the situation. Thanks to Andreas
2504 Schwab for pointing this out to me.
2506 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2508 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2509 entries are presorted so that entries with the same mnemonic are
2510 adjacent to each other in the table. Sort the entries for each
2511 instruction so that this is true.
2513 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2515 * m68k-dis.c: Include <libiberty.h>.
2516 (print_insn_m68k): Sort the opcode table on the most significant
2517 nibble of the opcode.
2519 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2521 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2522 "vsub", "vst", "xnor", and "xor" instructions.
2523 (V_a1): Renamed from V_a, msb of accumulator reg number.
2524 (V_a0): Add macro, lsb of accumulator reg number.
2526 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2528 * tic80-dis.c (print_insn_tic80): Broke excessively long
2529 function up into several smaller ones and arranged for
2530 the instruction printing function to be callable recursively
2531 to print vector instructions that have both a load and a
2532 math instruction packed into a single opcode.
2533 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2534 to explain why it comes after the other vector opcodes.
2536 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2538 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2539 move insns to handle immediate operands.
2541 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2543 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2544 fix operand mask in the "moveml" entries for the coldfire.
2546 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2548 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2549 New macros for building vector instruction opcodes.
2550 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2551 FMT_LI, which were unused. The field is now a flags field.
2552 Remove some opcodes that are possible, but illegal, such
2553 as long immediate instructions with doubles for immediate
2554 values. Add "vadd" and "vld" instructions.
2556 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2558 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2559 the order more logical. Move the shift alias instructions ("rotl",
2560 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2561 interspersed with the regular sr.x and sl.x instructions. Add
2562 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2563 "sub", "subu", "swcr", and "trap".
2565 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2567 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2568 (OFF_SL_PC): Renamed from OFF_SL.
2569 (OFF_SS_BR): New operand type for base relative operand.
2570 (OFF_SL_BR): New operand type for base relative operand.
2571 (REG_BASE): New operand type for base register operand.
2572 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2573 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2574 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2576 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2577 10 char field, padded with spaces on rhs, rather than a string
2578 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2579 than old TIC80_OPERAND_RELATIVE. Add support for new
2580 TIC80_OPERAND_BASEREL flag bit.
2582 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2584 * tic80-dis.c (print_insn_tic80): Print floating point operands
2586 * tic80-opc.c (SPFI): Add single precision floating point
2587 immediate operand type.
2588 (ROTATE): Add rotate operand type for shifts.
2589 (ENDMASK): Add for shifts.
2590 (n): Macro for the 'n' bit.
2591 (i): Macro for the 'i' bit.
2592 (PD): Macro for the 'PD' field.
2593 (P2): Macro for the 'P2' field.
2594 (P1): Macro for the 'P1' field.
2595 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2598 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2600 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2601 adding in current address for pc-relative operands.
2603 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2605 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2606 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2607 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2608 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2609 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2610 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2611 (REG_SCALED, LSI_SCALED): New operand types.
2612 (E): New macro for 'E' bit at bit 27.
2613 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2614 opcodes, including the various size flavors (b,h,w,d) for
2615 the direct load and store instructions.
2617 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2619 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2621 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2622 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2623 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2624 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2625 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2626 masks with "MASK_* & ~M_*" to get the M bit reset.
2627 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2629 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2631 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2632 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2633 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2635 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2636 CC, SICR, and LICR table entries.
2637 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2638 "bcnd", and "brcr" opcodes.
2640 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2642 * ppc-opc.c (powerpc_operands): Make comment match the
2643 actual fields (no shift field).
2644 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2645 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2646 partial implementation, work in progress.
2647 * tic80-opc.c (tic80_operands): Begin construction operands table.
2648 (tic80_opcodes): Continue populating opcodes table and start
2649 filling in the operand indices.
2650 (tic80_num_opcodes): Add this.
2652 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2654 * m68k-opc.c: Add #B case for moveq.
2656 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2658 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2659 before they are used.
2661 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2663 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2664 for "breakpoint" instruction.
2666 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2668 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2669 (dep): Use ALL_CFLAGS rather than CFLAGS.
2671 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2673 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2676 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2678 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2679 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2681 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2683 * mips16-opc.c: Add "abs".
2685 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2687 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2688 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2689 (disassembler): Add bfd_arch_tic80 support to set disassemble
2690 to print_insn_tic80.
2691 * tic80-dis.c (print_insn_tic80): Add stub.
2693 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2695 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2696 * configure: Regenerate with autoconf.
2697 * tic80-dis.c: Add file.
2698 * tic80-opc.c: Add file.
2700 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2702 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2704 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2706 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2707 (mn10200_opcodes): Use it for some logicals and btst insns.
2708 Add "break" and "trap" instructions.
2710 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2712 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2714 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2716 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2717 relative load or add now depends upon whether the instruction is
2720 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2722 * mn10200-dis.c: Finish writing disassembler.
2723 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2724 Fix mask for "jmp (an)".
2726 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2727 handle endianness issues for mn10300.
2729 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2731 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2733 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2734 instruction. Fix opcode field for "movb (imm24),dn".
2736 * mn10200-opc.c (mn10200_operands): Fix insertion position
2739 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2741 * mn10200-opc.c: Create mn10200 opcode table.
2742 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2743 but moving along nicely.
2745 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2747 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2749 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2751 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2752 specifiers for fmovem* instructions.
2754 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2756 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2758 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2760 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2763 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2765 * mn10300-opc.c: Add some comments explaining the various
2768 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2770 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2772 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2775 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2776 operand specifiers in fmovm* instructions.
2778 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2780 * ppc-opc.c (insert_li): Give an error if the offset has the two
2781 least significant bits set.
2783 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2785 * mips-dis.c (print_insn_mips16): Separate the instruction from
2786 the arguments with a tab, not a space.
2788 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2790 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2793 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2796 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2798 * configure: Rebuild with autoconf 2.12.
2800 Add support for mips16 (16 bit MIPS implementation):
2801 * mips16-opc.c: New file.
2802 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2803 (mips16_reg_names): New static array.
2804 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2805 after seeing a 16 bit symbol.
2806 (print_insn_little_mips): Likewise.
2807 (print_insn_mips16): New static function.
2808 (print_mips16_insn_arg): New static function.
2809 * mips-opc.c: Add jalx instruction.
2810 * Makefile.in (mips16-opc.o): New target.
2811 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2812 * configure: Rebuild.
2814 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2816 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2817 operand specifiers in *save, *restore and movem* instructions.
2819 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2822 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2823 register operands for immediate arithmetic, not, neg, negx, and
2824 set according to condition instructions.
2826 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2827 specifier of the effective-address operand in immediate forms of
2828 arithmetic instructions. The specifier for the immediate operand
2829 notes how and where the constant will be stored.
2831 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2833 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2836 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2839 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2841 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2843 * mn10300-dis.c (disassemble): Handle register lists.
2845 * mn10300-opc.c: Fix handling of register list operand for
2846 "call", "ret", and "rets" instructions.
2848 * mn10300-dis.c (disassemble): Print PC-relative and memory
2849 addresses symbolically if possible.
2850 * mn10300-opc.c: Distinguish between absolute memory addresses,
2851 pc-relative offsets & random immediates.
2853 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2855 (disassemble): Handle SPLIT and EXTENDED operands.
2857 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2859 * mn10300-dis.c: Rough cut at printing some operands.
2861 * mn10300-dis.c: Start working on disassembler support.
2862 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2864 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2866 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2868 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2870 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2872 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2874 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2875 register argument is calls and jmp instructions.
2877 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2879 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2880 getx operand. Fix opcode for mulqu imm,dn.
2882 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2884 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2885 in MN10300_OPERAND_SPLIT operands for how many bits
2886 appear in the basic insn word. Add IMM32_HIGH24,
2887 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2888 (mn10300_opcodes): Use new operands as needed.
2890 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2891 for bset, bclr, btst instructions.
2892 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2894 * mn10300-opc.c (mn10300_operands): Remove many redundant
2895 operands. Update opcode table as appropriate.
2896 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2897 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2899 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2901 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2902 operands (for indexed load/stores). Fix bitpos for DI
2903 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2904 few instructions that insert immediates/displacements in the
2905 middle of the instruction. Add IMM8E for 8 bit immediate in
2906 the extended part of an instruction.
2907 (mn10300_operands): Use new opcodes as appropriate.
2909 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2911 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2912 sequential so the assembler never parallelizes it with
2915 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2917 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2918 a data/address register that appears in register field 0
2919 and register field 1.
2920 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2922 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2924 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2925 standard disassembly.
2927 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2928 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2929 Recategorize PALcode instructions.
2931 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2933 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2935 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2937 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2938 there are no operand types.
2940 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2942 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2944 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2946 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2948 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2950 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2952 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2953 and sst.w instructions.
2955 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2958 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2960 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2963 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2965 * ppc-opc.c (PPCPWR2): Define.
2966 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2969 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2971 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2972 field for movhu instruction.
2974 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2975 cast value to "long" not "signed long" to keep hpux10
2978 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2980 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2983 * mn10300-opc.c (FMT*): Remove definitions.
2985 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2986 for shift-by-register opcodes.
2988 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2989 into [AD][MN][01] for encoding the position of the register
2992 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2994 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2995 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2997 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2999 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3000 Fix various typos. Add "PAREN" operand.
3001 (MEM, MEM2): Define.
3002 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3003 operands. Fix several typos.
3005 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3008 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3010 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3011 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3013 (mn10300_opcodes): Break opcode format out into its own field.
3014 Update many operand fields to deal with signed vs unsigned
3015 issues. Fix one or two typos in the "mov" instruction
3016 opcode, mask and/or operand fields.
3018 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3020 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3021 m68851 wasn't reset.
3023 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3025 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3026 all opcodes. Very rough cut at operands for all opcodes.
3028 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3031 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3033 * mn10200-opc.c, mn10300-opc.c: New files.
3034 * mn10200-dis.c, mn10300-dis.c: New files.
3035 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3036 * disassemble.c: Break mn10x00 support into 10200 and 10300
3038 * configure.in: Likewise.
3039 * configure: Rebuilt.
3041 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3043 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3045 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3047 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3049 * disassemble (ARCH_mn10x00): Define.
3050 (disassembler): Handle bfd_arch_mn10x00.
3051 * configure.in: Recognize bfd_mn10x00_arch.
3052 * configure: Rebuilt.
3054 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3056 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3057 accordingly. Don't declare functions using op_rtn.
3059 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3061 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3062 params to be more standard.
3063 * (disassemble): Print absolute addresses and symbolic names for
3064 branch and jump targets.
3065 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3067 * (v850_opcodes): Add breakpoint insn.
3069 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3071 * m68k-opc.c: Move the fmovemx data register cases before the
3072 other cases, so that they get recognized before the data register
3073 does gets treated as a degenerate register list.
3075 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3077 * mips-opc.c: Add a case for "div" and "divu" with two registers
3078 and a destination of $0.
3080 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3082 * mips-dis.c (print_insn_arg): Add prototype.
3083 (_print_insn_mips): Ditto.
3085 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3087 * mips-dis.c (print_insn_arg): Print condition code registers as
3090 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3092 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3094 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3096 * v850-dis.c (disassemble): Make static. Provide prototype.
3098 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3100 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3103 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3105 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3106 ']' characters into the output stream.
3107 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3108 Add "memop" field to all opcodes (for the disassembler).
3109 Reorder opcodes so that "nop" comes before "mov" and "jr"
3110 comes before "jarl".
3112 * v850-dis.c (print_insn_v850): Fix typo in last change.
3114 * v850-dis.c (print_insn_v850): Properly handle disassembling
3115 a two byte insn at the end of a memory region when the memory
3116 region's size is only two byte aligned.
3118 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3120 * v850-dis.c (v850_reg_names): Define.
3121 (v850_sreg_names, v850_cc_names): Likewise.
3122 (disassemble): Very rough cut at printing operands (unformatted).
3124 * v850-opc.c (BOP_MASK): Fix.
3125 (v850_opcodes): Fix mask for jarl and jr.
3127 * v850-dis.c: New file. Skeleton for disassembler support.
3128 * Makefile.in Remove v850 references, they're not needed here.
3129 * configure.in: Add v850-dis.o when building v850 toolchains.
3130 * configure: Rebuilt.
3131 * disassemble.c (disassembler): Call v850 disassembler.
3133 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3134 (insert_d8_6, extract_d8_6): New functions.
3135 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3136 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3138 (IF4A, IF4B): Use "D7" instead of "D7S".
3139 (IF4C, IF4D): Use "D8_7" instead of "D8".
3140 (IF4E, IF4F): New. Use "D8_6".
3141 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3142 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3144 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3145 (v850_operands): Change D16 to D16_15, use special insert/extract
3146 routines. New new D16 that uses the generic insert/extract code.
3147 (IF7A, IF7B): Use D16_15.
3148 (IF7C, IF7D): New. Use D16.
3149 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3151 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3152 message. Issue an error if the branch offset is odd.
3154 * v850-opc.c: Add notes about needing special insert/extract
3155 for all the load/store insns, except "ld.b" and "st.b".
3157 * v850-opc.c (insert_d22, extract_d22): New functions.
3158 (v850_operands): Use insert_d22 and extract_d22 for
3160 (insert_d9): Fix range check.
3162 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3164 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3165 and set bits field to D9 and D22 operands.
3167 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3169 * v850-opc.c (v850_operands): Define SR2 operand.
3170 (v850_opcodes): "ldsr" uses R1,SR2.
3172 * v850-opc.c (v850_opcodes): Fix opcode specs for
3173 sld.w, sst.b, sst.h, sst.w, and nop.
3175 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3177 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3178 end of the opcode table.
3180 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3182 * d10v-opc.c (pre_defined_registers): Added register pairs,
3183 "r0-r1", "r2-r3", etc.
3185 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3187 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3188 Create I16U for an unsigned 16bit mmediate operand.
3189 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3191 * v850-opc.c (v850_operands): Define EP operand.
3192 (IF4A, IF4B, IF4C, IF4D): Use EP.
3194 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3195 with immediate operand, "movhi". Tweak "ldsr".
3197 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3198 correct. Get sld.[bhw] and sst.[bhw] closer.
3200 * v850-opc.c (v850_operands): "not" is a two byte insn
3202 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3204 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3206 * v850-opc.c (two): Get order of words correct.
3208 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3210 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3211 register source and destination operands.
3212 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3214 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3215 same thinko in "trap" opcode.
3217 * v850-opc.c (v850_opcodes): Add initializer for size field
3220 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3221 Add D8 for 8-bit unsigned field in short load/store insns.
3222 (IF4A, IF4D): These both need two registers.
3223 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3224 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3225 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3226 for "ldsr" and "stsr".
3227 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3230 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3231 short store word (sst.w).
3233 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3235 * v850-opc.c (v850_operands): Added insert and extract fields,
3236 pointers to functions that handle unusual operand encodings.
3238 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3240 * v850-opc.c (v850_opcodes): Enable "trap".
3242 * v850-opc.c (v850_opcodes): Fix order of displacement
3243 and register for "set1", "clr1", "not1", and "tst1".
3245 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3247 * v850-opc.c (v850_operands): Add "B3" support.
3248 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3251 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3253 * v850-opc.c: Close unterminated comment.
3255 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3257 * v850-opc.c (v850_operands): Add flags field.
3258 (v850_opcodes): add move opcodes.
3260 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3262 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3263 * configure: (bfd_v850v_arch) Add new case.
3264 * configure.in: (bfd_v850_arch) Add new case.
3265 * v850-opc.c: New file.
3267 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3269 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3271 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3273 * d10v-opc.c: Add additional information to the opcode
3274 table to help determinine which instructions can be done
3277 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3279 * mpw-make.sed: Update editing of include pathnames to be
3282 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3284 * arm-opc.h: Added "bx" instruction definition.
3286 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3288 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3290 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3292 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3294 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3296 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3298 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3300 * makefile.vms: Update for alpha-opc changes.
3302 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3304 * i386-dis.c (print_insn_i386): Actually return the correct value.
3305 (ONE, OP_ONE): #ifdef out; not used.
3307 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3309 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3310 Changed subi operand type to treat 0 as 16.
3312 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3314 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3317 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3319 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3320 memory transfer instructions. Add new format string entries %h and %s.
3321 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3324 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3326 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3327 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3329 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3331 * alpha-dis.c (print_insn_alpha_osf): Remove.
3332 (print_insn_alpha_vms): Remove.
3333 (print_insn_alpha): Make globally visible. Chose the register
3334 names based on info->flavour.
3335 * disassemble.c: Always return print_insn_alpha for the alpha.
3337 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3339 * d10v-dis.c (dis_long): Handle unknown opcodes.
3341 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3343 * d10v-opc.c: Changes to support signed and unsigned numbers.
3344 All instructions with the same name that have long and short forms
3345 now end in ".l" or ".s". Divs added.
3346 * d10v-dis.c: Changes to support signed and unsigned numbers.
3348 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3350 * d10v-dis.c: Change all functions to use info->print_address_func.
3352 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3354 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3355 move ccr/sr insns more strict so that the disassembler only
3356 selects them when the addressing mode is data register.
3358 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3359 * d10v-opc.c (pre_defined_registers): Declare.
3360 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3361 to pick a better name for the registers.
3363 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3365 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3366 operands for fexpand and fpmerge. From Christian Kuehnke
3367 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3369 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3371 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3372 print routine. Take new regnames and cpumask arguments.
3373 Kill the environment variable nonsense.
3374 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3375 (print_insn_alpha_vms): New function. Do VMS style regnames.
3376 * disassemble.c (disassembler): Test bfd flavour to pick
3377 between OSF and VMS routines. Default to OSF.
3379 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3381 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3382 * configure: Rebuild.
3383 * Makefile.in (install): Use @INSTALL_SHLIB@.
3385 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3387 * configure: (bfd_d10v_arch) Add new case.
3388 * configure.in: (bfd_d10v_arch) Add new case.
3389 * d10v-dis.c: New file.
3390 * d10v-opc.c: New file.
3391 * disassemble.c (disassembler) Add entry for d10v.
3393 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3395 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3396 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3398 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3400 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3401 distinguish between variants of the instruction set.
3402 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3403 distinguish between variants of the instruction set.
3405 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3407 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3408 the 8086 instruction set.
3409 * i386-dis.c: General cleanups. Make most things static. Add
3410 prototypes. Get rid of static variables aflags and dflags. Pass
3411 them as args (to almost everything).
3413 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3415 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3417 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3419 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3420 if the next arg is marked with SRC_IN_DST. Gross.
3422 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3423 we're looking for and find EXR.
3425 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3426 if we're looking for KBIT and we don't find it.
3428 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3431 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3432 3bit immediate operands.
3434 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3436 * Released binutils 2.7.
3438 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3439 <kkaempf@progis.ac-net.de>.
3441 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3443 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3445 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3447 * sparc-dis.c (print_insn_sparclite): New routine to print
3448 sparclite instructions.
3450 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3452 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3454 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3456 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3457 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3458 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3460 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3462 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3463 Use autoconf-set values.
3464 (docdir, oldincludedir): Removed.
3465 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3467 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3469 * alpha-opc.c: New file.
3470 * alpha-opc.h: Remove.
3471 * alpha-dis.c: Complete rewrite to use new opcode table.
3472 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3473 * configure: Rebuild with autoconf 2.10.
3474 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3475 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3477 (alpha-opc.o): New target.
3479 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3481 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3482 Set imm_added_to_rs1 even if the source and destination register
3485 * sparc-opc.c: Add some two operand forms of the wr instruction.
3487 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3489 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3492 * disassemble.c (disassembler): Handle H8/S.
3493 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3495 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3497 * sparc-opc.c: Add beq/teq as aliases for be/te.
3499 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3500 <sergei@msil.sps.mot.com>.
3502 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3504 * makefile.vms: New file.
3506 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3508 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3510 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3513 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3515 * i386-dis.c (OP_OFF): Call append_prefix.
3517 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3519 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3520 unsigned long to silence a warning from the Solaris PowerPC
3523 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3525 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3527 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3529 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3531 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3532 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3533 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3534 cpush, cpusha, cpull sparclet insns.
3536 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3538 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3540 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3542 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3543 Set F_FLOAT on other floating point instructions.
3545 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3547 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3549 (powerpc_opcodes): Add 860/821 specific SPRs.
3551 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3553 * configure.in: Permit --enable-shared to specify a list of
3554 directories. Set and substitute BFD_PICLIST.
3555 * configure: Rebuild.
3556 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3557 uses. Set to @BFD_PICLIST@.
3559 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3561 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3562 not "abs", which may be needed for the absolute in something
3563 like btst #0,@10:8. Print L_3 immediates separately from other
3564 immediates. Change ABSMOV reference to ABS8MEM.
3566 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3568 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3569 (current_arch_mask): New static global.
3570 (compute_arch_mask): New static function.
3571 (print_insn_sparc): Delete sparc_v9_p. New static local
3572 current_mach. Resort opcode table if current_mach changes.
3573 Generalize "insn not supported" test.
3574 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3575 Delete test for v9/!v9.
3576 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3578 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3579 (brfcx): Renamed to FBRX.
3580 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3581 coprocessor mnemonics are not supported on the sparclet).
3582 (condf): Renamed to CONDF.
3583 (SLCBCC2): Delete F_ALIAS flag.
3585 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3587 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3588 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3590 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3592 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3593 that the shared library version number is set correctly.
3595 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3597 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3598 Miles Bader <miles@gnu.ai.mit.edu>.
3599 * configure: Rebuild.
3601 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3603 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3606 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3608 * configure: Rebuild with autoconf 2.8.
3610 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3612 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3613 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3615 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3617 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3618 since they appear as targets in Makefile.in.
3619 * configure: Rebuild.
3621 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3623 * mpw-make.sed: Edit out shared library support bits.
3625 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3627 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3628 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3629 (sparc_opcodes): Add sparclet insns.
3630 (sparclet_cpreg_table): New static local.
3631 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3632 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3634 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3636 * i386-dis.c (index16): New static variable.
3637 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3639 (OP_indirE): Return result of OP_E.
3640 (OP_E): Check for 16 bit addressing mode, and disassemble
3641 correctly. Optimised 32 bit case a little. Don't print
3642 "(base,index,scale)" when sib specifies only an offset.
3644 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3646 * configure.in: Set and substitute SHLIB_DEP.
3647 * configure: Rebuild.
3648 * Makefile.in (SHLIB_DEP): New variable.
3649 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3650 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3651 COMMON_SHLIB, add them to piclist with appropriate modifications.
3652 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3653 here: just use piclist.
3655 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3657 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3658 (print_insn_sparc): Rewrite v9/not-v9 tests.
3659 (compare_opcodes): Likewise.
3660 * sparc-opc.c (MASK_<ARCH>): Define.
3661 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3662 (sparclet,v6notv9): Define.
3663 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3664 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3666 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3668 * configure.in: Call AC_PROG_CC before configure.host.
3669 * configure: Rebuild.
3671 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3673 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3675 * i386-dis.c (onebyte_has_modrm): New static array.
3676 (twobyte_has_modrm): New static array.
3677 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3679 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3681 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3684 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3686 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3689 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3691 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3692 m68010up, not just m68020up | cpu32.
3694 * Makefile.in (SONAME): New variable.
3695 ($(SHLINK)): Make a link to the transformed name, as well.
3696 (stamp-tshlink): New target.
3697 (install): Skip stamp-tshlink during install.
3699 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3701 * configure.in: Call AC_ARG_PROGRAM.
3702 * configure: Rebuild.
3703 * Makefile.in (program_transform_name): New variable.
3704 (install): Transform library name before installing it.
3706 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3708 * i960-dis.c (mem): Add HX dcinva instruction.
3710 Support for building as a shared library, based on patches from
3711 Alan Modra <alan@spri.levels.unisa.edu.au>:
3712 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3713 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3714 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3715 * configure: Rebuild.
3716 * Makefile.in (ALLLIBS): New variable.
3717 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3718 (COMMON_SHLIB, SHLINK): New variables.
3719 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3720 (STAGESTUFF): Remove variable.
3721 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3722 (stamp-piclist, piclist): New targets.
3723 ($(SHLIB), $(SHLINK)): New targets.
3724 ($(OFILES)): Depend upon stamp-picdir.
3725 (disassemble.o): Build twice if PICFLAG is set.
3726 (MOSTLYCLEAN): Add pic/*.o.
3727 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3728 (distclean): Remove pic and stamp-picdir.
3729 (install): Install shared libraries.
3730 (stamp-picdir): New target.
3732 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3734 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3735 Print unknown instruction as "unknown", rather than in hex.
3737 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3739 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3741 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3743 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3745 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3747 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3748 when necessary. From Ulrich Drepper
3749 <drepper@myware.rz.uni-karlsruhe.de>.
3751 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3753 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3754 sparc_num_opcodes. Update architecture enum values.
3755 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3756 (sparc_opcode_lookup_arch): New function.
3757 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3758 (sparc_opcodes): Add v9a shutdown insn.
3760 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3762 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3763 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3765 (print_insn_sparc64): Deleted.
3766 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3769 * sparc-opc.c (architecture_pname): Add v9a.
3771 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3773 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3774 incorrectly defined as 0x16 when it should be 0x15.
3775 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3776 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3777 excb (exception barrier) which is defined in the Alpha
3778 Architecture Handbook version 2.
3779 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3780 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3781 disassembled as or, for example.
3783 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3785 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3786 (_print_insn_mips): Change i from int to unsigned int.
3788 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3790 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3791 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3793 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3795 * i386-dis.c: Added Pentium Pro instructions.
3797 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3799 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3802 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3804 * sh-opc.h (sh_nibble_type): Added REG_B.
3805 (sh_arg_type): Added A_REG_B.
3806 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3808 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3810 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3812 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3814 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3816 * Makefile.in (distclean): Remove stamp-h. From Ronald
3817 F. Guilmette <rfg@monkeys.com>.
3819 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3821 From David Mosberger-Tang <davidm@azstarnet.com>:
3822 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3825 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3827 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3828 (sh_table): Added many SH3 opcodes.
3829 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3831 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3833 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3834 (subco,subco.): Mark this PPC, not PPCCOM.
3836 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3838 * configure: Rebuild with autoconf 2.7.
3840 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3842 * configure: Rebuild with autoconf 2.6.
3844 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3846 * configure.in: Sort list of architectures. Accept but do nothing
3847 for alliant, convex, pyramid, romp, and tahoe.
3849 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3851 * a29k-dis.c (print_special): Change num to unsigned int.
3853 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3855 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3858 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3860 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3861 * configure: Rebuilt.
3863 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3865 * configure.in: Add case for bfd_i860_arch.
3866 * configure: Rebuild.
3868 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3870 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3871 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3872 (NEXTDOUBLE): Likewise.
3873 (print_insn_m68k): Don't match fmoveml if there is more than one
3874 register in the list.
3875 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3877 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3879 * m68k-opc.c: Use #W rather than #w.
3880 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3882 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3884 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3885 and likewise for all the dbxx opcodes.
3887 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3889 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3891 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3893 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3894 the VR4100 specific instructions to the mips_opcodes structure.
3896 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3898 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3899 ugly Metrowerks bug in CW6, is fixed in CW7.
3901 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3903 * ppc-opc.c (whole file): Add flags for common/any support.
3905 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3907 * Makefile.in (BISON): Remove macro.
3908 (FLAGS_TO_PASS): Remove BISON.
3910 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3912 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3914 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3915 instructions that take no args by looking at the match mask.
3916 (print_insn_arg): Always print "%" before register names.
3917 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3918 [case '_']: Don't print "@#" before address.
3919 [case 'J']: Use "%s" as format string, not register name.
3920 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3922 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3924 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3927 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3929 From David Mosberger-Tang <davidm@azstarnet.com>
3931 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3932 (alpha_insn_set): added definitions for VAX floating point
3933 instructions (Unix compilers don't generate these, but handcoded
3934 assembly might still use them).
3936 * alpha-dis.c (print_insn_alpha): added support for disassembling
3937 the miscellaneous instructions in the Alpha instruction set.
3939 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3941 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3942 no longer create sysdep.h, sed ppc-opc.c to work around a
3943 serious Metrowerks C bug.
3944 * mpw-make.in: Remove.
3945 * mpw-make.sed: New file, used by mpw-configure to edit
3946 Makefile.in into an MPW makefile.
3948 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3950 * Makefile.in (maintainer-clean): New synonym for realclean.
3952 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3954 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3955 which use '0', '1', and '2' instead. Specify the proper size for
3956 a pmove immediate operand. Correct the pmovefd patterns to be
3957 moves to a register, not from a register.
3958 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3960 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3962 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3963 %psr, %wim, %tbr as F_NOTV9.
3965 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3967 * Makefile.in (Makefile): Just rebuild Makefile when running
3969 (config.h, stamp-h): New targets.
3970 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3971 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3972 rebuilding config.h.
3973 * configure: Rebuild.
3975 * mips-opc.c: Change unaligned loads and stores with "t,A"
3976 operands to use "t,A(b)".
3978 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3980 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3982 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3984 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3985 until 3 instead of until 2.
3987 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3989 * Makefile.in (ALL_CFLAGS): Define.
3990 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3991 (MOSTLYCLEAN): Add config.log.
3992 (distclean): Don't remove config.log.
3993 * configure.in: Substitute HDEFINES.
3994 * configure: Rebuild.
3996 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3998 * sh-opc.h (sh_arg_type): Add F_FR0.
3999 (sh_table, case fmac): Add F_FR0 as first argument.
4001 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4003 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4005 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4007 * sparc-dis.c: Remove all references to NO_V9.
4009 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4011 * aclocal.m4: Just include ../bfd/aclocal.m4.
4012 * configure: Rebuild.
4014 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4016 * sparc-dis.c (X_DISP19): Define.
4017 (print_insn, case 'G'): Use it.
4018 (print_insn, case 'L'): Sign extend displacement.
4020 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4022 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4023 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4024 host_makefile_frag or frags.
4025 * aclocal.m4: New file.
4026 * configure: Rebuild.
4027 * Makefile.in (INSTALL): Set to @INSTALL@.
4028 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4029 (INSTALL_DATA): Set to @INSTALL_DATA@.
4031 (AR_FLAGS): Set to rc rather than qc.
4032 (CC): Define as @CC@.
4033 (CFLAGS): Set to @CFLAGS@.
4034 (@host_makefile_frag@): Remove.
4035 (config.status): Remove dependency upon @frags@.
4037 * configure.in: ../bfd/config.bfd now just sets shell variables.
4038 Use them rather than looking through target Makefile fragments.
4039 * configure: Rebuild.
4041 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4043 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4045 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4047 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4048 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4051 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4052 (lookup_{name,value}): New functions.
4053 (prefetch_table): New static local.
4054 (sparc_{encode,decode}_prefetch): New functions.
4055 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4057 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4059 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4062 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4064 * sh-dis.c: Correct comment on first line of file.
4066 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4068 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4070 * sparc-opc.c (asi, membar): New static locals.
4071 (sparc_{encode,decode}_{asi,membar}): New functions.
4072 (sparc_opcodes, membar insn): Fix.
4073 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4074 Support decoding of membar masks.
4077 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4079 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4081 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4083 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4084 and likewise for the other branches. Add bhs as an alias for bcc,
4085 and likewise for the size variants. Add dbhs as an alias for
4088 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4090 * sh-opc.h (FP sts instructions): Update to match reality.
4092 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4094 * m68k-dis.c: (fpcr_names): Add % before all register names.
4095 (reg_names): Likewise.
4096 (print_insn_arg): Don't explicitly print % before register names.
4097 Add % before register names in static array names. In case 'r',
4098 print data registers as `@(Dn)', not `Dn@'. When printing a
4099 memory address, don't print @# before it.
4100 (print_indexed): Change base_disp and outer_disp from int to
4101 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4102 syntax. Sign extend 8 byte displacement correctly.
4103 (print_base): Print using MIT syntax. Print zpc when appropriate.
4104 Change parameter disp from int to bfd_vma.
4106 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4109 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4111 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4112 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4113 * sh-opc.h (sh_arg_type): Add new operand types.
4114 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4116 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4118 * Makefile.in (distclean): Remove generated file config.h.
4120 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4122 * Makefile.in (distclean): Remove generated file config.h.
4124 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4126 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4128 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4130 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4131 rather than numopcodes. Use m68k_opcodes rather than removed
4132 opcode function. Don't check F_ALIAS.
4133 (print_insn_arg): Change first parameter to be const char *.
4134 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4135 (m68k-opc.o): New target.
4136 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4137 * configure: Rebuild.
4139 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4141 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4142 (opcode_bits, opcode_hash_table): New variables.
4143 (opcodes_initialized): Renamed from opcodes_sorted.
4144 (build_hash_table): New function.
4145 (is_delayed_branch): Use hash table.
4146 (print_insn): Renamed from print_insn_sparc, made static.
4147 Build and use hash table. If !sparc64, ignore sparc64 insns,
4148 and vice-versa if sparc64.
4149 (print_insn_sparc, print_insn_sparc64): New functions.
4150 (compare_opcodes): Move sparc64 opcodes to end.
4151 Print commutative insns with constant second.
4152 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4154 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4156 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4157 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4158 avoids printing a delay slot in a delay slot.
4159 * sh-opc.h (sh_table): Fully bracket last entry.
4161 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4163 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4165 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4167 * configure.in: Get host_makefile_frag from ${srcdir}.
4169 * configure.in: Autoconfiscated. Check for string[s].h. Create
4170 config.h from config.in. Don't set up sysdep.h link.
4171 * sysdep.h: New file.
4172 * configure, config.in: New files, generated from configure.in.
4173 * Makefile.in: Updated to be processed autoconf-style.
4174 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4175 (Makefile): Depend on config.status.
4176 (config.status): New rule.
4177 * configure.bat: Update Makefile substitutions.
4179 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4181 * mips-opc.c (L1): Define.
4182 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4183 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4186 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4188 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4189 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4190 have multiple add units but only a single logical unit.
4192 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4193 shifted by 18, without any insertion or extraction function.
4194 (insert_cr, extract_cr): Remove.
4196 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4198 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4201 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4203 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4204 * sh-opc.h: Add copyright.
4206 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4208 * Makefile.in (crunch-m68k): Delete extra target accidentally
4209 checked in a while ago.
4211 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4213 * sh-opc.h (sh_table): Add SH3 support.
4215 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4217 * sh-opc.h: Added bsrf and braf.
4219 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4221 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4222 bogus [ls]fm{ea,fd} patterns.
4224 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4225 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4226 initialize it from memory. Make function static.
4227 (print_insn_{big,little}_arm): New functions.
4228 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4229 the correct endianness.
4231 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4233 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4236 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4238 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4239 17th, so that it builds again using GCC as the compiler.
4241 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4243 * mips-dis.c (print_insn_little_mips): Cast return value from
4244 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4245 expects an unsigned long, and that might be fewer words of
4246 argument storage (e.g., if bfd_vma is long long on a 32-bit
4248 (print_insn_big_mips): Likewise with bfd_getb32 value.
4249 (_print_insn_mips): Now static.
4251 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4253 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4254 gcc memory hog problem with initializer is fixed.
4256 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4258 Merge in support for Mac MPW as a host.
4259 (Old change descriptions retained for informational value.)
4261 * mpw-config.in (archname): Compute from the config.
4262 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4264 * mpw-config.in (target_arch): Compute from canonical target.
4265 (m68k, mips, powerpc, sparc): Add architectures.
4266 * mpw-make.in (disassemble.c.o): Add.
4267 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4269 * mpw-config.in (BFD_MACHINES): Set to a default value.
4270 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4272 * mpw-make.in (CSEARCH): Add extra-include to search path.
4274 * mpw-config.in (varargs.h): Don't create.
4275 (sysdep.h): Create using forward-include.
4276 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4278 * mpw-config.in: New file, MPW version of configure.in.
4279 * mpw-make.in: New file, MPW version of Makefile.in.
4281 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4283 * alpha-dis.c (print_insn_alpha): Put empty statement after
4286 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4288 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4289 (low_sign_extend): Likewise.
4290 (get_field): Delete unused function.
4291 (set_field, deposit_14, deposit_21): Likewise.
4293 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4295 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4298 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4300 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4302 * alpha-opc.h (OSF_ASMCODE): define
4303 print pal-code names as defined in App C of the
4304 Alpha Architecture Reference Manual
4306 * alpha-dis.c: cleaned up output
4307 print stylized code forms as defined in App A.4.3 of the
4308 Alpha Architecture Reference Manual
4310 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4312 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4314 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4317 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4319 * m68k-dis.c (opcode): New function. Returns address of opcode
4320 table entry given index, even if the opcode table was split to
4321 work around gcc bugs.
4322 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4324 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4325 (reg_names): Now const.
4326 (print_insn_arg): Arrays cacheFieldName and names now const.
4327 (print_indexed): Array scales now const.
4329 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4331 * ppc-opc.c: Sort recently added instructions by minor opcode
4332 number within major opcode number.
4334 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4336 * hppa-dis.c: Include libhppa.h.
4338 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4340 * mips-opc.c: Change dli to use M_DLI, and add dla.
4342 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4344 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4346 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4348 * mips-opc.c: Add r4650 mul instruction.
4350 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4352 * mips-opc.c: Add uld and usd macros for unaligned double load and
4355 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4357 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4358 mfdcr, mtdcr, icbt, iccci.
4360 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4362 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4363 signed char fields to shorts, more portable.
4365 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4367 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4368 char fields as signed chars, since they may have negative values.
4370 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4372 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4373 (mycroft@netbsd.org).
4375 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4377 From "Logg, Ed" <elogg@ea.com>:
4378 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4379 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4382 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4384 * ppc-opc.c: Changes based on patch from David Edelsohn
4385 <edelsohn@mhpcc.edu>.
4386 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4389 (insert_tbr): New static function.
4390 (extract_tbr): New static function.
4391 (XFXFXM_MASK, XFXM): Define.
4392 (XSPRBAT_MASK, XSPRG_MASK): Define.
4393 (powerpc_opcodes): Add instructions to access special registers by
4394 name. Add mtcr and mftbu.
4396 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4398 * mips-opc.c (P3): Define.
4399 (mips_opcodes): Add mad and madu.
4401 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4403 * configure.in: Add W65 support.
4404 * disassemble.c: Likewise.
4405 * w65-opc.h, w65-dis.c: New files.
4407 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4409 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4412 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4414 * mips-opc.c: Add dli as a synonym for li.
4416 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4418 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4419 print something for reserved opcode values, even if it won't
4422 * mips-dis.c (_print_insn_mips): When initializing, shift right
4423 and mask, to avoid sign extension problems on the Alpha.
4425 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4428 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4430 * sh-opc.h (mov.l gbr): Get direction right.
4431 * sh-dis.c (print_insn_shx): New function.
4432 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4433 print opcodes with right byte order.
4435 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4437 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4438 to avoid conflicts with getopt.
4440 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4442 * hppa-dis.c (print_insn_hppa): Read the instruction using
4443 bfd_getb32, so that it works on a little endian or 64 bit host.
4444 Remove unused local variable op.
4446 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4448 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4449 addu does not work correctly if -mips3.
4451 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4453 * a29k-dis.c (print_special): Add special register names defined
4454 on 29030, 29040 and 29050.
4455 (print_insn): Handle new operand type 'I'.
4457 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4459 * Makefile.in (INSTALL): Use top level install.sh script.
4461 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4463 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4464 that it works on a little endian host.
4466 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4468 * configure.in: Use ${config_shell} when running config.bfd.
4470 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4472 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4474 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4476 * a29k-dis.c (print_insn): Print the opcode.
4478 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4480 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4482 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4484 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4486 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4488 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4489 which store a value into memory.
4491 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4493 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4494 * arm-dis.c, arm-opc.h: New files.
4496 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4498 * Makefile.in (ns32k-dis.o): Add dependency.
4499 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4500 string, not as array of chars.
4502 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4504 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4506 * sparc-opc.c: Added sparclite extended FP operations, and
4507 versions of v9 impdep* instructions permitting specification of
4510 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4512 * i960-dis.c (reg_names): Now const.
4513 (struct sparse_tabent): New type, copied from array type in mem
4515 (ctrl): Local static array ctrl_tab now const.
4516 (cobr): Local static array cobr_tab now const.
4517 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4518 static variable mem_tab no longer explicitly initialized. Changed
4519 mem_init to const array of struct sparse_tabent.
4520 (reg): Local static variable reg_tab no longer explicitly
4521 initialized. Changed reg_init to const array of struct
4523 (ea): Local static array scale_tab now const.
4525 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4528 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4530 * configure.bat: the disassember needs to be enabled for
4531 "objdump -d" to work in djgpp.
4533 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4535 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4536 (invalid_float): Enabled general version, doesn't require running
4537 on ns32k host. Changed to take char* argument, and test for
4538 explicitly specified sizes, instead of using sizeof() on host CPU
4540 (INVALID_FLOAT): Cast first argument.
4541 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4542 list_P032, list_M032): Now const.
4543 (optlist, list_search): Made appropriate arguments now point to
4545 (print_insn_arg): Changed static array of one-character-string
4546 pointers into a static const array of characters; fixed sprintf
4547 statement accordingly.
4549 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4551 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4552 from distribution. A ns32k-dis.c from a previous distribution has
4553 been brought up to date and supports the new interface.
4555 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4557 * configure.in: add bfd_ns32k_arch target support.
4559 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4560 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4562 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4564 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4567 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4569 * h8300-dis.c, mips-dis.c: Don't use true and false.
4571 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4573 * configure.in: Change --with-targets to --enable-targets.
4575 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4577 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4578 opcodes to the first instruction with that opcode, to speed
4579 disassembly of large files. From ralphc@pyramid.com (Ralph
4582 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4584 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4586 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4588 * configure.bat: update to latest makefile.in
4590 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4592 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4593 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4594 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4595 slot insn is in a delay slot.
4596 * z8k-opc.h: (resflg): Fix patterns.
4597 * h8500-opc.h Fix CR insn patterns.
4599 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4601 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4602 "cmpl" before POWER versions, so that gas -many uses them.
4604 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4606 * disassemble.c: New file.
4607 * Makefile.in (OFILES): Add disassemble.o.
4608 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4609 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4610 binutils/configure.in.
4612 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4613 opcode being examined.
4615 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4617 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4618 (insert_ral, insert_ram, insert_ras): New functions.
4619 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4620 RAS for store with update.
4622 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4624 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4625 (edelsohn@npac.syr.edu).
4627 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4629 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4632 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4634 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4636 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4638 * ppc-opc.c (powerpc_operands): The signedp field has been
4639 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4640 instead. Add new operand SISIGNOPT.
4641 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4642 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4643 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4646 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4648 * i386-dis.c (struct private): Renamed to dis_private. `private'
4649 is a reserved word for dynix cc.
4651 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4653 * configure.in: Change error message to refer to bfd/config.bfd
4654 rather than bfd/configure.in.
4656 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4658 * ppc-opc.c: Define POWER2 as short alias flag.
4659 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4662 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4664 * i960-dis.c (print_insn_i960): Don't read a second word for
4665 opcodes 0, 1, 2 and 3.
4667 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4669 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4671 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4673 * m68881-ext.c: Removed; no longer used.
4674 * Makefile.in: Changed accordingly.
4676 * m68k-dis.c (ext_format_68881): Don't declare.
4677 (print_insn_m68k): If an instruction uses place 'i', it uses at
4678 least four fixed bytes.
4679 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4680 extended float, convert to double using floatformat_to_double, not
4681 ieee_extended_to_double, and fetch the data before converting it.
4683 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4685 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4686 davidj@ICSI.Berkeley.EDU (David Johnson).
4688 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4690 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4691 PowerPC uses bdnz[l][a].
4693 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4695 * dis-buf.c, i386-dis.c: Include sysdep.h.
4697 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4699 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4701 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4702 by Motorola PowerPC 601 with PPC_OPCODE_601.
4703 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4704 Disassemble Motorola PowerPC 601 instructions as well as normal
4705 PowerPC instructions.
4707 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4709 * i960-dis.c (reg, mem): Just use a static array instead of
4712 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4714 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4715 condition name index if this is for a negated condition.
4717 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4718 Floating point format for 'H' operand is backwards from normal
4719 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4720 operands (fmpyadd and fmpysub), handle bizarre register
4721 translation correctly for single precision format.
4723 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4724 or 'I' operands if the next format specifier is 'M' (fcmp
4725 condition completer).
4727 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4729 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4730 single number giving a bitmask for the MB and ME fields of an M
4731 form instruction. Change NB to accept 32, and turn it into 0;
4732 also turn 0 into 32 when disassembling. Seperated SH from NB.
4733 (insert_mbe, extract_mbe): New functions.
4734 (insert_nb, extract_nb): New functions.
4735 (SC_MASK): Mask out SA and LK bits.
4736 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4737 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4738 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4739 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4740 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4741 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4742 (powerpc_macros): Define table of macro definitions.
4743 (powerpc_num_macros): Define.
4745 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4746 if PPC_OPERAND_NEXT is set.
4748 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4750 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4751 char. Retrieve contents using bfd_getl32 instead of shifting.
4753 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4755 * ppc-opc.c: New file. Opcode table for PowerPC, including
4756 opcodes for POWER (RS/6000).
4757 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4758 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4759 (CFILES): Add ppc-dis.c.
4760 (ppc-dis.o, ppc-opc.o): New targets.
4761 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4763 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4765 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4766 No space before 'u', 'f', or 'N'.
4768 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4770 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4771 farther than we should.
4773 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4775 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4777 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4779 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4781 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4782 needs it, to prevent reading past the end of a section.
4784 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4786 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4787 Removed t,A case for la; always use t,A(b) case.
4789 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4791 From Ted Lemen <mellon@pepper.ncd.com>
4792 * mips-dis.c (print_insn_arg): Handle 'k'.
4793 * mips-opc.c: Make cache use k, not t.
4795 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4797 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4798 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4799 FLOAT_FORMAT_CODE to put out floating point register names.
4801 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4803 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4805 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4807 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4809 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4811 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4812 larger than 32. Moved dsxx32 variants first for disassembler.
4814 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4816 * z8kgen.c, z8k-opc.h: Add full lda information.
4818 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4820 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4821 movb instructions. Any necessary space will be emitted by
4822 the code to handle nullification completers.
4824 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4826 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4828 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4830 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4831 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4833 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4835 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4837 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4839 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4840 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4842 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4844 * m88k-dis.c (m88kdis): comment change. Remove space after
4846 (printop): handle new arg types DEC and XREG for m88110.
4848 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4850 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4851 type for absolute branch addresses. Delete special
4852 "ble" and "be" code in 'W' operand code.
4854 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * mips-opc.c: Set hazard information correctly for branch
4857 likely instructions.
4859 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4861 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4862 info->fprintf_func for printing and info->print_address_func for
4865 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4867 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4869 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4871 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4872 Corrected second case of "b" for disassembler.
4874 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4876 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4877 to BFD swapping routines to correspond to BFD name changes.
4879 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * mips-opc.c: Change div machine instruction to be z,s,t rather
4882 than s,t. Change div macro to be d,v,t rather than d,s,t.
4883 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4884 rem and remu which generates only the corresponding div
4885 instruction. This is for compatibility with the MIPS assembler,
4886 which only generates the simple machine instruction when an
4887 explicit destination of $0 is used.
4888 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4890 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4892 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4893 WR_31 hazard for bal, bgezal, bltzal.
4895 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4897 * hppa-dis.c (print_insn_hppa): Use print function
4898 from within the disassemble_info, not fprintf_filtered.
4900 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4902 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4903 Law, law@cs.utah.edu.)
4905 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4907 * mips-opc.c ("absu"): Removed.
4910 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4912 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4913 Changed hazard information to distinguish between memory load
4914 delays and coprocessor load delays.
4916 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4918 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4920 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4922 * configure.in: Don't pass cpu to config.bfd.
4924 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4926 * m88k-dis.c (m88kdis): Make class unsigned.
4928 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4930 * alpha-dis.c (print_insn_alpha): One branch format case was
4931 missing the instruction name.
4933 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4935 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4936 Add the arch-specific auxiliary files.
4937 (OFILES): Remove the arch-specific auxiliary files
4938 and use BFD_MACHINES instead of DIS_LIBS.
4939 * configure.in: Set BFD_MACHINES based on --with-targets option.
4941 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4943 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4946 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4948 * sparc-opc.c: Change CONST to const to deal with gcc
4949 -Dconst=__const -traditional.
4951 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4953 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4954 coprocessor instructions out of #if 0, and made them use new
4957 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4959 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4961 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4963 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4964 instruction, for use by the disassembler.
4966 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4967 hand-coded sign extensions that depended on 32-bit host ints.
4968 FIXME, we still depend on big-endian host bitfield ordering.
4969 (sparc_print_insn): Set the insn_info_valid field, and the
4970 other fields that describe the instruction being printed.
4972 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4974 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4975 `jmp' instead of just one of them.
4977 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4979 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4980 (fput_fp_reg_r): Renamed from fput_reg_r.
4981 (fput_fp_reg): New function.
4982 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4984 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4986 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4988 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4990 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4992 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4993 don't output a space.
4995 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4997 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4999 * mips-opc.c: New file, containing opcode table from
5000 ../include/opcode/mips.h.
5001 * Makefile.in: Add it.
5003 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5005 * m88k-dis.c: New file, moved in from gdb and changed to use the
5006 new dis-asm.h disassembler interface.
5007 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5008 (m88k-dis.o): New target.
5010 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5012 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5013 argument string const char * to correspond to opcode/mips.h.
5015 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5017 * mips-dis.c: Updated to account for name changes in new version
5019 * Makefile.in: Added header file dependencies.
5021 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5023 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5025 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5027 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5028 extend, rather than shifts.
5030 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5032 * Makefile.in: Undo 15 June change.
5034 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5036 * m68k-dis.c (print_insn_arg): Change return value to byte count
5038 * m68k-dis.c: Re-write to detect invalid operands before
5039 printing anything, so we can handle this the same way we
5040 handle invalid opcodes.
5042 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5044 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5046 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5048 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5051 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5053 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5055 * configure.in: Do make sysdep.h link.
5056 * Makefile.in: Search ../include. Don't search ../bfd.
5058 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5060 Changes from Jeff Law, law@cs.utah.edu:
5061 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5062 Do not print a space before the completers specified by
5065 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5067 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5068 defined, since gdb has been fixed.
5070 Changes from Jeff Law, law@cs.utah.edu:
5071 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5072 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5073 be a *disassemble_info, not a *FILE.
5074 * hppa-dis.c: Support 'd', '!', and 'a'.
5075 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5076 * hppa-dis.c: Delete cases which are no longer needed.
5078 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5080 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5082 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5084 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5087 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5089 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5090 * configure.in: No longer need to configure to get sysdep.h.
5092 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5094 * Patches from Jeffrey Law <law@cs.utah.edu>.
5095 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5096 templates for 1.1 FP computational instructions.
5098 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5100 * h8500-dis.c (print_insn_h8500): Address argument is type
5102 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5105 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5106 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5108 * sparc-dis.c (compare_opcodes): Move static declaration to
5111 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5113 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5114 instruction, remove unimp hack from 'l' argument.
5116 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5118 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5121 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5123 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5124 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5127 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5129 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5130 arrays of string pointers to 2-d arrays of chars, to save
5133 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5135 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5136 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5138 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5140 * hppa-dis.c: New file from Utah, adapted to new disassembler
5142 * Makefile.in: Include it.
5144 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5146 * sh-dis.c, sh-opc.h: New files.
5148 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5150 * alpha-dis.c, alpha-opc.h: New files.
5152 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5154 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5157 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5159 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5161 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5163 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5166 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5168 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5169 and double percent signs a few places.
5171 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5173 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5174 Use info->print_address_func not print_address.
5176 * dis-buf.c (generic_print_address): New function.
5178 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5180 * Makefile.in: Add sparc-dis.c.
5181 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5183 Add `add' instruction to the set that get checked
5184 for a preceding `sethi' in order to print an absolute address.
5185 * (print_insn): Disassembly prefers real instructions.
5186 (is_delayed_branch): Speed up.
5187 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5188 Still missing some float ops, and needs testing.
5189 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5190 F_ALIAS. Use printf, not fprintf, when not passing a file
5192 (compare_opcodes): Check that identical instructions have
5193 identical opcodes, complain otherwise.
5196 * Include reg_names.
5198 Use dis-asm.h/read_memory_func interface.
5200 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5202 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5203 deliberately return non-zero to setjmp from longjmp. Otherwise
5204 this code fails to compile.
5206 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5208 * m68k-dis.c: Fix prototype for fetch_arg().
5210 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5212 * dis-buf.c: New file, for new read_memory_func interface.
5213 Makefile.in (OFILES): Include it.
5214 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5215 Use new read_memory_func interface.
5217 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5219 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5220 * h8500-opc.h: Fix couple of opcodes.
5222 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5224 * Makefile.in: add dvi & installcheck targets
5226 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5228 * Makefile.in: Update for h8500-dis.c.
5230 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5232 * h8500-dis.c, h8500-opc.h: New files
5234 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5236 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5237 ../include/dis-asm.h.
5238 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5239 and ../gdb/m68k-pinsn.c).
5240 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5241 and ../gdb/i386-pinsn.c).
5242 * m68881-ext.c: New file. Moved definition of
5243 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5244 * Makefile.in: Adjust for new files.
5245 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5246 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5247 can be dis-assembled.
5249 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5251 * mips-dis.c (print_insn_arg): Now returns void.
5253 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5255 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5256 files that use the macros.
5258 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5260 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5261 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5262 (CFILES): Added mips-dis.c.
5264 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5266 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5267 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5269 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5271 * Makefile.in: Improve *clean rules.
5272 * configure.in: Allow a default host.
5274 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5276 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5277 files include other sysdep files
5279 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5281 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5283 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5285 * configure.in: For host support, use ../bfd/configure.host
5286 so it stays in sync with the ../bfd/hosts database.
5288 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5290 * configure.in: use cpu-vendor-os triple instead of nested cases
5292 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5294 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5295 *always* the wrong one.
5297 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5299 * z8kgen.c: added copyright info
5301 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5303 * z8k-dis.c (unparse_instr): prettier tabs
5304 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5306 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5308 * configure.in: Add ncr* configuration.
5309 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5310 picayune ANSI compilers happy.
5312 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5314 * configure.in (i386): Make i386 and i486 synonymous for now.
5315 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5317 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5319 * Makefile.in (install): Fix typo.
5321 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5323 * Makefile.in (make): Remove obsolete crud.
5324 (sparc-opc.o): Avoid Sun Make VPATH bug.
5326 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5328 * Makefile.in: since there are no SUBDIRS, remove rule and
5329 references of subdir_do.
5331 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5333 * Makefile.in (install): Get the library name right here too.
5334 Don't install bfd.h, since it's unrelated to this library. No
5335 subdirs to recurse into, either.
5336 (CFILES): The source file has a .c suffix, not .o.
5338 * sparc-opc.c: New file, moved from BFD.
5339 * Makefile.in (OFILES): Build it.
5341 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5343 * z8k-dis.c: fixed forward refferences of some declarations.
5345 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5347 * Makefile.in: get the name of the library right
5349 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5351 * z8k-dis.c: knows how to disassemble z8k stuff
5352 * z8k-opc.h: new file full of z8000 opcodes
5356 version-control: never