2 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
4 * vu0.h: New file with cop2/vu0 instructions.
5 * mips-opc.c: Include vu0.h.
6 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
8 (print_insn_mips): Do not emit a tab after an instruction if the
9 first arg is an instruction completer (&). If the next arg is an
10 escape character (%), then print the next arg verbatim.
11 * Makefile.am (mips-opc.lo): Depend on vu0.h
15 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
17 * dvp-opc.c (vif_opcodes): Add stcycl.
19 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
21 * dvp-dis.c (print_dma): Change length from 16 to 8.
24 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
26 * m32r-opc.h: Regenerate.
29 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
31 * dvp-opc.c (print_dest1): Print dest spec again.
32 (print_vfreg,print_accdest): Likewise.
33 (vif_unpack_len): Round result up to word boundary.
37 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
39 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
41 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
43 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
48 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
50 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
51 (print_insn): Do mask comparison on proper opcode word.
52 Print unsigned values in hex.
53 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
54 (parse_bc): Catch missing dest.
55 (parse_vfreg): Replace atoi call with strtol.
56 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
57 (parse_bcftreg,parse_ffstreg): Handle missing dest.
58 (extract_gif_eop): New function.
59 (gif_operands): Update eop entry.
60 (VGIFOP,VGIFNREGS): Fix calcs.
61 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
62 (gif_regs): Add entry for unused 11 case.
63 (print_gif_regs): Print empty list instead of nothing.
64 (extract_gif_nloop): Fix value calc.
65 (print_gif_nloop): Always print value, even if 0.
66 (insert_vif_wlcl,extract_vif_wlcl): New functions.
67 (vif_operands): Use them for wl,cl fields.
68 (state_vif_wl,state_vif_cl): New static locals.
69 (parse_vif_mode): Handle numeric args.
70 (vif_unpack_len_value,vif_unpack_len): New functions.
71 (vif_insn_len): Call vif_unpack_len.
74 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
76 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
78 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
80 * cgen-asm.in: Move insertion of generated routines to top of file.
81 (insert_normal): Add prototype. Delete `shift' arg.
82 * cgen-dis.in: Move insertion of generated routines to top of file.
83 (extract_normal): Add prototype. Delete `shift' arg.
84 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
85 (print_keyword): Add prototype. Fix type of `attrs' arg.
88 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
90 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
91 * mips-opc.c ("mac","dmac") : Added 4320 insns.
94 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
96 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
97 assume that info->symbols is non-empty.
99 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
101 * alpha-opc.c (cvtqs) There is no such thing.
102 (cvttq): Missing most of the /*d variants.
105 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
107 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
109 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
110 (r5900/msub.s): Takes three operands, not four. Fix opcode.
114 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
116 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
117 delayed branches or jumps.
121 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
123 * dvp-opc.c (vif_operands): Add unpack[u] support.
124 (vif_opcodes): Ditto.
125 (*_vif_imrubits): Renamed from *_vif_imrbits.
127 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
129 * dvp-dis.c (print_insn): Handle word number.
130 Handle mips address vs vu address.
131 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
132 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
133 ({insert,extract}_dma_addr): Fix word ofset.
134 ({insert,print}_gif_regs): Fix encode/decode.
137 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
139 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
141 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
142 * tic30-dis.c (print_branch): Likewise.
144 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
145 * dvp-dis.c (dvp_info_mach_type): New function.
146 (print_insn_dvp): Call it.
147 (print_vif): Return length of 4 if mpg or direct insn so following
148 insns get properly disabled.
149 (print_gif): Fix word order.
150 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
151 (gif_operands): Fix word order.
152 (gif_opcodes): Likewise.
153 ({insert,extract,print}_gif_regs): Likewise.
154 (gif_regs): Add new register number/name changes.
155 (dma_opcodes): Add dmarefe insn.
158 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
160 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
161 saved_symbol code as it is no longer needed.
163 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
165 * cgen-asm.c: Include symcat.h.
166 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
168 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
171 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
173 * dvp-opc.c (extra_dma_flags): Fix typos.
174 (dma_operands): Fix word numbers.
175 (dma_opcodes): Likewise.
176 ({insert,extract}_dma_flags): Likewise.
179 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
181 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
184 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
186 * dvp-dis.c (print_gif): Complete.
187 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
188 (state_gif_{nregs,regs,nloop}): New static locals.
190 (dvp_opcode_init_{parse,print}): Init gif state locals.
191 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
192 (vif_insn_len): Handle `unpack'.
193 ({insert,extract}_dma_flags): Complete.
197 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
199 * mips-opc.c (mula.s): Renamed from multa.s.
202 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
204 * m32r-opc.[ch]: Regenerate.
207 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
209 * dvp-opc.c (dma_operands): Rewrite.
210 (dma_operand_{count,addr}): New globals.
211 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
212 (insert_dma_addr): Insert value into insn.
213 (extract_dma_addr): Extract value from insn.
215 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
217 * dvp-dis.c (print_vu): Handle loi insns.
218 (print_insn): Likewise.
219 * dvp-opc.c (vu_lower_opcodes): Add "loi".
220 (vu_operands): Make LDEST1 a FAKE operand.
221 (parse_dest1): Allow elided argument.
222 (print_dest1): Don't print the argument.
224 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
226 * dvp-opc.c (parse_vfreg): Dest spec is optional.
227 (print_vfreg): Don't print dest spec.
228 (parse_accdest): Dest spec is optional.
229 (print_accdest): Don't print dest spec.
232 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
234 * Makefile.am (CGENFILES): Update.
235 * Makefile.in: Regenerate.
236 * cgen-asm.in (insert_normal): Result is error message now.
237 Validate value to be inserted.
238 (insert_insn_normal): Result is error message now.
239 (@arch@_cgen_assemble_insn): Update.
240 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
241 arguments. Don't perform validation here.
242 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
244 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
246 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
247 operand instance list.
248 * m32r-opc.c: Regenerate.
250 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
252 * Makefile.am (AUTOMAKE_OPTIONS): Define.
253 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
255 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
257 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
259 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
261 * configure.in: Get the version number from BFD.
262 * configure: Rebuild.
264 From H.J. Lu <hjl@gnu.org>:
265 * Makefile.am (libopcodes_la_LDFLAGS): Define.
266 * Makefile.in: Rebuild.
268 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
270 * m32r-opc.c: Regenerate.
271 * m32r-opc.h: Regenerate.
273 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
275 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
276 Ignore ALIAS insns if asked to.
277 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
278 * m32r-opc.c: Regenerate.
281 * dvp.opc.c: Nicely format opcode tables.
282 (vu_operands): New element UFLAGS.
283 (parse_uflags,print_uflags): New functions.
284 (vu_upper_opcodes): Add UFLAGS to all insns.
287 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
289 Fix rac to accept only a0:
290 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
291 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
292 Introduce OPERAND_GPR.
293 * d10v-dis.c (print_operand): Likewise.
295 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
297 * cgen-opc.in: New file.
298 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
299 * Makefile.am (CGENFILES): Add cgen-opc.in.
300 * Makefile.in: Regenerate.
302 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
303 (cgen_hw_lookup): Make result const.
305 * cgen-dis.in (*): Use PTR instead of void *.
306 (print_insn): Delete unused vars `i', `syntax'.
308 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
311 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
313 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
314 (vif_opcodes): Update renamed insns.
315 * dvp-dis.c (*): Likewise.
318 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
320 * configure, aclocal.m4: Rebuild with new libtool.
323 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
325 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
326 instructions use a PC relative branch, not absolute.
329 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
331 * configure.in: Set libtool_enable_shared rather than
332 libtool_shared. Remove diversion hack.
333 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
335 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
337 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
338 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
340 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
342 * tic30-dis.c: New file.
343 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
344 * configure.in: Handle bfd_tic30_arch.
345 * Makefile.am: Rebuild dependencies.
346 (CFILES): Add tic30-dis.c
347 (ALL_MACHINES): Add tic30-dis.lo.
348 * configure, Makefile.in: Rebuild.
351 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
353 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
354 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
355 macwhi-a and macwlo-a instructions.
359 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
361 * dvp-opc.c, fixed encoding of a bunch of instructions to
362 be consistent with the asmvu assembler (and inconsistent
363 with the specification).
365 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
367 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
368 in the opcode table. The pkemscalf instruction must come first.
370 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
372 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
375 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
377 * m32r-opc.h (HAVE_CPU_M32R): Define.
380 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
382 * dvp-dis.c, dvp-opc.c: New files.
383 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
384 * configure: Regenerate.
385 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
386 (dvp-dis.lo,dvp-opc.lo): Add rules for.
387 (mips-dis.lo): Compile with @archdefs@.
388 * Makefile.in: Regenerate.
389 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
390 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
393 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
395 * v850-opc.c (insertion routines): If both alignment and size is
396 wrong then report this.
398 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
400 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
401 Only recognize instructions for the current target_processor.
403 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
405 * d10v-dis.c (PC_MASK): Correct value.
406 (print_operand): If there's a reloc, don't calculate the
407 address because they could be in different sections.
409 start-sanitize-cygnus
410 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
412 * cgen.sh: Rewrite to be like simulator's version.
413 * Makefile.am (cgen): Update call to cgen.sh.
414 * Makefile.in: Regenerate
417 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
419 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
420 instruction after the 4650's "mul" instruction; nobody's using the
421 4010 these days. If object files someday indicate which processor
422 variant they're intended for, we can do a better job at this.
425 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
427 * mips-opc.c (c.lt.s): Add r5900 variant.
431 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
433 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
434 table provided entry size. Use CGEN_INSN_MNEMONIC.
435 (cgen_parse_keyword): Rewrite.
436 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
437 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
438 * cgen-opc.c: Clean up pass over `struct foo' usage.
439 (cgen_keyword_lookup_value): Handle "" entry.
440 (cgen_keyword_add): Likewise.
441 start-sanitize-cygnus
442 * Makefile.am: Add cgen support.
443 * Makefile.in: Regenerate.
444 * configure.in: Add cgen support.
445 * configure: Regenerate.
446 * aclocal.m4: Regenerate.
447 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
450 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
452 * mips-opc.c: Add FP_D to s.d instruction flags.
454 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
456 * m68k-opc.c (halt, pulse): Enable them on the 68060.
459 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
461 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
462 PC relative offset forms before the 15 bit forms. An assembler command
463 line option now chooses the default.
467 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
469 * mips-opc.c: Add many missing r5900 instructions.
473 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
475 * d30v-opc.c (d30v_opcode_table): Set new flags bits
476 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
479 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
481 * configure: Only build libopcodes shared if --enable-shared's value
482 was `yes', or was set to `*opcodes*'.
483 * aclocal.m4: Likewise.
484 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
485 original source of this bit of code. It's not clear what the best fix
489 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
491 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
494 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
496 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
497 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
498 offset forms before the 15 bit forms, to default to the long forms.
501 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
503 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
505 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
507 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
508 symbol if none is present.
509 (print_insn_big_arm): Prevent examination of stored symbol if
512 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
514 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
516 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
518 * disassemble.c: Remove disasm_symaddr() function.
520 * arm-dis.c: Use info->symbol instead of info->flags to determine
521 if disassmbly should be in Thumb or Arm mode.
523 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
525 * arm-dis.c: Add support for disassembling Thumb opcodes.
526 (print_insn_thumb): New function.
528 * disassemble.c (disasm_symaddr): New function.
530 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
531 (thumb_opcodes): Table of Thumb opcodes.
533 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
535 * m68k-opc.c (btst): Change Dd@s to Dd;b.
537 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
538 and 'v' as operand types.
540 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
542 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
543 <olivier.carmona@di.epfl.ch>.
544 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
545 which has a two word opcode with a one word argument.
548 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
550 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
551 unsigned, not signed.
552 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
555 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
557 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
558 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
559 (ftrv): Slay the cut-and-paste monster.
561 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
563 * d10v-dis.c (print_operand):
564 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
566 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
568 * d10v-opc.c (OPERAND_FLAG): Split into:
569 (OPERAND_FFLAG, OPERAND_CFLAG) .
573 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
575 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
576 field for all INSN_MACRO's.
579 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
581 * mips-opc.c (sync,cache): These are 3900 insns.
583 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
585 sh-opc.h (sh_table): Remove ftst/nan.
587 start-sanitize-vr5400
588 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
590 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
591 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
593 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
597 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
599 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
600 Add tx49 insns and configury.
603 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
605 * mips-opc.c (ffc, ffs): Fix mask.
608 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
610 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
614 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
616 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
617 start-sanitize-vr5400
618 Added VR5400 instructions.
619 (N5): New cpu-id macro.
621 (WR_HILO, RD_HILO, MOD_HILO): New macros.
623 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
625 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
626 (WR_HILO, RD_HILO, MOD_HILO): New macros.
628 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
630 * v850-dis.c (disassemble): Replace // with /* ... */
632 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
634 * sparc-opc.c: Add wr & rd for v9a asr's.
635 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
636 (v9a_asr_reg_names): New variable.
637 Patch from David Miller <davem@vger.rutgers.edu>.
639 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
641 * sparc-opc.c (v9notv9a): New insn type.
642 (IMPDEP): Move to the end to not conflict with edge8 et al.
643 Patch from David Miller <davem@vger.rutgers.edu>.
645 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
647 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
649 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
651 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
653 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
655 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
656 of disassemble_info structure to determine if an overlay address
657 has a matching symbol in low memory.
659 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
660 new symbol_at_address_func field in disassemble_info structure.
662 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
664 * v850-opc.c (extract_d22): Use signed arithmatic.
666 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
668 * mips-opc.c: Three op mult is not an ISA insn.
670 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
672 * mips-opc.c: Fix formatting.
674 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
676 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
677 than assuming that char is signed. Explicitly sign extend 16 bit
678 values, rather than assuming that short is 16 bits.
679 (OP_sI, OP_J, OP_DIR): Likewise.
682 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
684 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
688 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
690 * v850-opc.c: Fix typo in comment.
692 * v850-dis.c (disassemble): Add test of processor type when
695 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
697 * configure.in: Use a diversion to set enable_shared before the
698 arguments are parsed.
699 * configure: Rebuild.
701 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
703 * m68k-opc.c (TBL1): Use ! rather than `.
704 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
706 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
708 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
710 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
712 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
715 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
716 * aclocal.m4: Rebuild with new libtool.
717 * configure: Rebuild.
720 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
722 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
725 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
727 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
729 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
731 * v850-opc.c (v850_opcodes): Further rearrangements.
734 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
736 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
739 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
741 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
744 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
746 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
748 * mips16-opc.c: Added mips16 sdbbp.
751 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
753 * v850-opc.c: Initialise processors field of v850_opcode structure.
756 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
758 Merge changes from Martin Hunt:
760 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
762 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
763 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
764 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
766 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
768 * d30v-dis.c (print_insn): First operand of d*i (delayed
769 branch) instructions is relative.
771 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
772 (d30v_operand_table): Add IMM6S3 type.
773 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
775 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
776 and cmp instructions.
778 * d30v-opc.c: Correct entries for repeat*, and sat*.
779 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
780 types. Correct several formats.
782 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
784 * d30v-opc.c (pre_defined_registers): Change control registers.
786 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
787 SHORT_C2. Manual was incorrect.
789 * d30v-dis.c (lookup_opcode): Return value now indicates
790 if an opcode has a short and a long form. Used for deciding
791 to append a ".s" or ".l".
792 (print_insn): Append a ".s" to an instruction if it is
793 the short form and ".l" if it is a long form. Do not append
794 anything if the instruction has only one possible size.
796 * d30v-opc.c: Change mulx2h to require an even register.
797 New form: SHORT_A2; a SHORT_A form that needs an even
798 register as the first operand.
800 * d30v-dis.c (print_insn_d30v): Fix problem where the last
801 instruction was not being disassembled if there were an odd
802 number of instructions.
804 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
808 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
810 * v850-dis.c (disassemble): Improved display of register lists.
813 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
815 * sparc-opc.c (sparc_opcodes): Fix assembler args to
816 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
817 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
818 fandnot1s, fandnot2s.
820 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
822 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
824 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
826 * cgen-asm.c (cgen_parse_address): New argument resultp.
828 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
830 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
832 * mn10200-dis.c (disassemble): PC relative instructions are
833 relative to the next instruction, not the current instruction.
835 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
837 * v850-dis.c (disassemble): Only signed extend values that are not
838 returned by extract functions.
839 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
841 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
843 * v850-opc.c: Update comments. Remove use of
844 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
846 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
848 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
850 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
852 * configure: Rebuilt with latest devo autoconf for NT support.
854 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
856 * v850-dis.c (disassemble): Use curly brace syntax for register
859 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
860 where r0 is being used as a destination register.
863 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
865 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
868 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
870 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
871 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
872 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
873 Add insns to access SGR and DBR.
874 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
876 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
878 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
881 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
883 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
884 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
887 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
889 * configure (cgen_files): Add support for v850e target.
890 * configure.in (cgen_files): Add support for v850e target.
892 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
894 * configure (cgen_files): Add support for v850ea target.
895 * configure.in (cgen_files): Add support for v850ea target.
898 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
900 * configure.in (bfd_arc_arch): Add.
901 * configure: Rebuild.
902 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
903 * Makefile.in: Rebuild.
904 * arc-dis.c, arc-opc.c: New files.
905 * disassemble.c (ARCH_all): Define ARCH_arc.
906 (disassembler): Add ARC support.
908 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
911 * v850-dis.c (disassemble): Add support for v850EA instructions.
913 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
914 (v850_opcodes): Add v850EA instructions.
916 * v850-dis.c (disassemble): Add support for v850E instructions.
918 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
919 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
920 insert_spe, extract_spe): New Functions.
921 (v850_opcodes): Add v850E instructions.
924 * v850-opc.c: Reorganised and re-layed out to improve readability
927 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
929 * configure: Rebuild with autoconf 2.12.1.
931 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
933 * aclocal.m4, configure: Rebuild with new automake patches.
935 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
937 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
938 * acinclude.m4: Just include acinclude.m4 from BFD.
939 * aclocal.m4, configure: Rebuild.
941 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
943 * Makefile.am: New file, based on old Makefile.in.
944 * acconfig.h: New file.
945 * acinclude.m4: New file.
946 * stamp-h.in: New file.
947 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
948 Removed shared library handling; now handled by libtool. Replace
949 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
950 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
951 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
952 handling in AC_OUTPUT.
953 * dep-in.sed: Change .o to .lo.
954 * Makefile.in: Now built with automake.
955 * aclocal.m4: Now built with aclocal.
956 * config.in, configure: Rebuild.
958 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
960 * mips-opc.c: Fix typo/thinko in "eret" instruction.
963 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
965 * mips-opc.c: Fix coding of mtsa.
968 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
970 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
972 * sparc-dis.c (sorted_opcodes): New static local.
973 (struct opcode_hash): `opcode' is pointer to const element.
974 (build_hash): First arg is now table of sorted pointers.
975 (print_insn_sparc): Sort opcodes by sorting table of pointers.
976 (compare_opcodes): Update.
978 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
980 * cgen-opc.c: #include <ctype.h>.
981 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
982 Handle case insensitive hashing.
983 (hash_keyword_value): Change type of `value' to unsigned int.
985 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
987 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
988 precision FP, mark it as such. Likewise for double precision
989 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
992 (mips_builtin_opcodes): Remove non-existant r5900 instructions
996 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
998 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
999 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1002 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1004 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1006 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1007 nesting depth when all the macros are expanded.
1009 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1011 * sparc-opc.c: The fcmp v9a instructions take an integer register
1012 as a destination, not a floating point register. From Christian
1013 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1015 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1017 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1018 syntax. From Roman Hodek
1019 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1021 * i386-dis.c (twobyte_has_modrm): Fix pand.
1023 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1025 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1027 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1029 * arm-dis.c: Add prototypes for arm_decode_shift and
1032 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1034 * mips-opc.c: Add r3900 insns.
1036 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1038 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1039 print delay slot instructions on the same line. When using a PC
1040 relative load, add a comment with the value being loaded if it can
1043 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1045 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1046 to pushS/popS for segment regs and byte constant so that
1047 pushw/popw printed when in 16 bit data mode.
1049 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1050 print cbtw, cwtd in 16 bit data mode.
1051 * i386-dis.c (putop): extra case W to support above.
1053 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1054 address size prefix in 16 bit address mode.
1056 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1058 * sh-dis.c: Reindent. Rename local variable fprintf to
1061 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1063 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1065 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1067 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1069 * mips16-opc.c (mip16_opcodes): same.
1071 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1073 * m68k-opc.c (moveb): Change $d to %d.
1075 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1077 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1078 (twobyte_has_modrm): Likewise.
1080 (OP_MMX, OP_EM, OP_MS): New static functions.
1082 * i386-dis.c: Revert patch of April 4. The output now matches
1085 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1087 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1090 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1092 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1094 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1096 * Makefile.in (install): Depend upon installdirs.
1097 (installdirs): New target.
1099 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1101 From Thomas Graichen <graichen@rzpd.de>:
1102 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1103 * configure: Rebuild.
1105 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1107 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1108 Delete string{,s}.h support.
1110 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1112 * cgen-asm.c (cgen_parse_operand_fn): New global.
1113 (cgen_parse_{{,un}signed_integer,address}): Update call to
1114 cgen_parse_operand_fn.
1115 (cgen_init_parse_operand): New function.
1116 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1117 from cgen_asm_init_parse.
1118 (m32r_cgen_assemble_insn): New operand `errmsg'.
1119 Delete call to as_bad, return error message to caller.
1120 (m32r_cgen_asm_hash_keywords): #if 0 out.
1122 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1124 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1126 [case 'J']: Fix typo in register name.
1128 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1130 * configure.in: Substitute SHLIB_LIBS.
1131 * configure: Rebuild.
1132 * Makefile.in (SHLIB_LIBS): New variable.
1133 ($(SHLIB)): Use $(SHLIB_LIBS).
1135 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1137 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1139 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1141 * disassemble.c (disassembler): Handle m32r.
1143 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1145 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1146 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1147 * Makefile.in (CFILES): Add them.
1148 (ALL_MACHINES): Add them.
1149 (dependencies): Regenerate.
1150 * configure.in (cgen_files): New variable.
1151 (bfd_m32r_arch): Add entry.
1152 * configure: Regenerate.
1154 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1156 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1157 * configure: Rebuild.
1159 * Makefile.in: Rebuild dependencies.
1161 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1163 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1166 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1168 * Branched binutils 2.8.
1170 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1172 * m10200-dis.c: Rename from mn10200-dis.c.
1173 * m10200-opc.c: Rename from mn10200-opc.c.
1174 * m10300-dis.c: Rename from mn10300-dis.c
1175 * m10300-opc.c: Rename from mn10300-opc.c.
1176 * Makefile.in: Update accordingly.
1178 * mips16-opc.c: Add mul and dmul macros.
1180 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1182 * makefile.vms: Update CFLAGS, add clean target.
1184 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1186 * mips-opc.c: Add "wait". From Ralf Baechle
1187 <ralf@gnu.ai.mit.edu>.
1189 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1190 * configure, config.in: Rebuild.
1191 * sysdep.h: Include <stdlib.h> if it exists.
1192 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1194 * Makefile.in: Rebuild dependencies.
1196 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1198 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1199 Andrew Bray <andy@madhouse.demon.co.uk>.
1201 * mips-opc.c: Add cast when setting mips_opcodes.
1203 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1205 * v850-dis.c (disassemble): Fix sign extension problem.
1206 * v850-opc.c (extract_d*): Fix sign extension problems to make
1207 disassembly calculate branch offsets correctly.
1209 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1211 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1213 * mips-opc.c: Add dctr and dctw.
1216 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1218 * d30v-dis.c (print_insn): Change the way signed constants
1221 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1223 * Makefile.in (BFD_H): New variable.
1224 (HFILES): New variable.
1225 (CFILES): Add all C files.
1226 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1227 Delete old dependencies, and build new ones.
1228 * dep-in.sed: New file.
1230 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1232 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1234 start-sanitize-coldfire
1235 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1237 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1240 end-sanitize-coldfire
1241 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1243 * mn10200-opc.c: Change "trap" to "syscall".
1244 * mn10300-opc.c: Add new "syscall" instruction.
1246 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1248 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1249 mulul insns on the coldfire.
1251 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1253 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1254 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1255 (print_insn_little_arm): Likewise.
1257 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1259 Based on patches from H.J. Lu <hjl@lucon.org>:
1260 * i386-dis.c (fetch_data): Add prototype.
1261 * m68k-dis.c (fetch_data): Add prototype.
1262 (dummy_print_address): Add prototype. Make static.
1263 * ppc-opc.c (valid_bo): Add prototype.
1264 * sparc-dis.c (build_hash_table): Add prototype.
1265 (is_delayed_branch, compute_arch_mask): Add prototypes.
1266 (print_insn_sparc): Make several local variables const.
1267 (compare_opcodes): Change arguments to const PTR. Add prototype.
1268 * sparc-opc.c (arg): Change name field to be const.
1269 (lookup_name, lookup_value): Add prototypes. Change table and
1270 name parameters to be const.
1271 (sparc_encode_asi): Change name parameter to be const.
1272 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1273 (sparc_encode_sparclet_cpreg): Likewise.
1274 (sparc_decode_asi): Change return type to be const.
1275 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1276 (sparc_decode_sparclet_cpreg): Likewise.
1278 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1280 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1281 Solaris doesn't like the combined options, and the -f is
1283 (stamp-tshlink, install): Likewise.
1285 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1287 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1290 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1292 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1294 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1296 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1299 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1301 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1303 start-sanitize-tic80
1304 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1306 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1308 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1310 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1313 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1315 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1316 floatformat_to_double to make portable.
1317 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1320 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1322 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1323 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1325 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1327 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1328 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1330 start-sanitize-tic80
1331 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1333 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1334 (OFF_SL_BR_SCALED): ... to this, and added the flag
1335 TIC80_OPERAND_BASEREL to the flags word.
1336 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1340 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1342 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1343 Change mips_opcodes from const array to a pointer,
1344 and change bfd_mips_num_opcodes from const int to int,
1345 so that we can increase the size of the mips opcodes table
1348 start-sanitize-tic80
1349 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1351 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1352 store BITNUM values in the table in one's complement form
1353 to match behavior when assembler is given a raw numeric
1354 value for a BITNUM operand.
1355 * tic80-dis.c (print_operand_bitnum): Ditto.
1359 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1361 * d30v-opc.c: Removed references to FLAG_X.
1364 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1366 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1369 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1371 * Makefile.in: Added d30v object files.
1372 * configure: (bfd_d30v_arch) Rebuilt.
1373 * configure.in: (bfd_d30v_arch) Added new case.
1374 * d30v-dis.c: New file.
1375 * d30v-opc.c: New file.
1376 * disassemble.c (disassembler) Add entry for d30v.
1379 start-sanitize-tic80
1380 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1382 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1383 representations for the floating point BITNUM values.
1385 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1387 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1388 in the table in one's complement form, as they appear in the
1390 (tic80_symbol_to_value): Use macros to access predefined
1392 (tic80_value_to_symbol): Ditto.
1393 (tic80_next_predefined_symbol): New function.
1394 * tic80-dis.c (print_operand_bitnum): Remove code that did
1395 one's complement for BITNUM values.
1398 start-sanitize-r5900
1399 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1401 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1404 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1406 * makefile.vms: Remove 8 bit characters. Update to latest
1409 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1411 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1413 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1415 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1416 (IMM24_PCREL): Likewise.
1418 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1420 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1421 address for an extended PC relative instruction that is not a
1424 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1426 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1429 start-sanitize-tic80
1430 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1432 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1433 (tic80_opcodes): Sort entries so that long immediate forms
1434 come after short immediate forms, making it easier for
1435 assembler to select the right one for a given operand.
1438 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1440 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1442 (print_insn_mips16): Likewise.
1444 start-sanitize-r5900
1445 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1447 * mips-opc.c: add r5900.
1450 start-sanitize-tic80
1451 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1453 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1454 a symbol class that restricts translation to just that
1455 class (general register, condition code, etc).
1457 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1459 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1460 and REG_DEST_E for register operands that have to be
1461 an even numbered register. Add REG_FPA for operands that
1462 are one of the floating point accumulator registers.
1463 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1464 (tic80_opcodes): Change entries that need even numbered
1465 register operands to use the new operand table entries.
1466 Add "or" entries that are identical to "or.tt" entries.
1469 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1471 * mips16-opc.c: Add new cases of exit instruction for
1473 * mips-dis.c (print_mips16_insn_arg): Display floating point
1474 registers in operands of exit instruction. Print `$' before
1475 register names in operands of entry and exit instructions.
1477 start-sanitize-tic80
1478 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1480 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1481 pairs for all predefined symbols recognized by the assembler.
1482 Also used by the disassembling routines.
1483 (tic80_symbol_to_value): New function.
1484 (tic80_value_to_symbol): New function.
1485 * tic80-dis.c (print_operand_control_register,
1486 print_operand_condition_code, print_operand_bitnum):
1487 Remove private tables and use tic80_value_to_symbol function.
1490 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1492 * d10v-dis.c (print_operand): Change address printing
1493 to correctly handle PC wrapping. Fixes PR11490.
1495 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1497 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1500 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1502 * mips-dis.c (print_insn_mips16): Set insn_info information.
1503 (print_mips16_insn_arg): Likewise.
1505 * mips-dis.c (print_insn_mips16): Better handling of an extend
1506 opcode followed by an instruction which can not be extended.
1508 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1510 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1511 coldfire moveb instruction to not allow an address register as
1512 destination. Although the documentation does not indicate that
1513 this is invalid, experiments uncovered unexpected behavior.
1514 Added a comment explaining the situation. Thanks to Andreas
1515 Schwab for pointing this out to me.
1517 start-sanitize-tic80
1518 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1520 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1521 entries are presorted so that entries with the same mnemonic are
1522 adjacent to each other in the table. Sort the entries for each
1523 instruction so that this is true.
1526 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1528 * m68k-dis.c: Include <libiberty.h>.
1529 (print_insn_m68k): Sort the opcode table on the most significant
1530 nibble of the opcode.
1532 start-sanitize-tic80
1533 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1535 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1536 "vsub", "vst", "xnor", and "xor" instructions.
1537 (V_a1): Renamed from V_a, msb of accumulator reg number.
1538 (V_a0): Add macro, lsb of accumulator reg number.
1540 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1542 * tic80-dis.c (print_insn_tic80): Broke excessively long
1543 function up into several smaller ones and arranged for
1544 the instruction printing function to be callable recursively
1545 to print vector instructions that have both a load and a
1546 math instruction packed into a single opcode.
1547 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1548 to explain why it comes after the other vector opcodes.
1551 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1553 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1554 move insns to handle immediate operands.
1556 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1558 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1559 fix operand mask in the "moveml" entries for the coldfire.
1561 start-sanitize-tic80
1562 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1564 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1565 New macros for building vector instruction opcodes.
1566 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1567 FMT_LI, which were unused. The field is now a flags field.
1568 Remove some opcodes that are possible, but illegal, such
1569 as long immediate instructions with doubles for immediate
1570 values. Add "vadd" and "vld" instructions.
1572 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1574 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1575 the order more logical. Move the shift alias instructions ("rotl",
1576 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1577 interspersed with the regular sr.x and sl.x instructions. Add
1578 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1579 "sub", "subu", "swcr", and "trap".
1581 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1583 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1584 (OFF_SL_PC): Renamed from OFF_SL.
1585 (OFF_SS_BR): New operand type for base relative operand.
1586 (OFF_SL_BR): New operand type for base relative operand.
1587 (REG_BASE): New operand type for base register operand.
1588 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1589 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1590 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1592 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1593 10 char field, padded with spaces on rhs, rather than a string
1594 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1595 than old TIC80_OPERAND_RELATIVE. Add support for new
1596 TIC80_OPERAND_BASEREL flag bit.
1598 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1600 * tic80-dis.c (print_insn_tic80): Print floating point operands
1602 * tic80-opc.c (SPFI): Add single precision floating point
1603 immediate operand type.
1604 (ROTATE): Add rotate operand type for shifts.
1605 (ENDMASK): Add for shifts.
1606 (n): Macro for the 'n' bit.
1607 (i): Macro for the 'i' bit.
1608 (PD): Macro for the 'PD' field.
1609 (P2): Macro for the 'P2' field.
1610 (P1): Macro for the 'P1' field.
1611 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1615 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1617 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1618 adding in current address for pc-relative operands.
1620 start-sanitize-tic80
1621 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1623 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1624 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1625 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1626 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1627 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1628 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1629 (REG_SCALED, LSI_SCALED): New operand types.
1630 (E): New macro for 'E' bit at bit 27.
1631 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1632 opcodes, including the various size flavors (b,h,w,d) for
1633 the direct load and store instructions.
1635 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1637 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1639 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1640 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1641 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1642 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1643 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1644 masks with "MASK_* & ~M_*" to get the M bit reset.
1645 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1647 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1649 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1650 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1651 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1653 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1654 CC, SICR, and LICR table entries.
1655 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1656 "bcnd", and "brcr" opcodes.
1659 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1661 * ppc-opc.c (powerpc_operands): Make comment match the
1662 actual fields (no shift field).
1663 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1664 start-sanitize-tic80
1665 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1666 partial implementation, work in progress.
1667 * tic80-opc.c (tic80_operands): Begin construction operands table.
1668 (tic80_opcodes): Continue populating opcodes table and start
1669 filling in the operand indices.
1670 (tic80_num_opcodes): Add this.
1673 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1675 * m68k-opc.c: Add #B case for moveq.
1677 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1679 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1680 before they are used.
1682 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1684 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1685 for "breakpoint" instruction.
1687 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1689 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1690 (dep): Use ALL_CFLAGS rather than CFLAGS.
1692 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1694 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1697 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1699 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1700 start-sanitize-tic80
1701 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1704 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1706 * mips16-opc.c: Add "abs".
1708 start-sanitize-tic80
1709 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1711 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1712 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1713 (disassembler): Add bfd_arch_tic80 support to set disassemble
1714 to print_insn_tic80.
1715 * tic80-dis.c (print_insn_tic80): Add stub.
1717 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1719 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1720 * configure: Regenerate with autoconf.
1721 * tic80-dis.c: Add file.
1722 * tic80-opc.c: Add file.
1725 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1727 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1729 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1731 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1732 (mn10200_opcodes): Use it for some logicals and btst insns.
1733 Add "break" and "trap" instructions.
1735 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1737 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1739 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1741 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1742 relative load or add now depends upon whether the instruction is
1745 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1747 * mn10200-dis.c: Finish writing disassembler.
1748 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1749 Fix mask for "jmp (an)".
1751 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1752 handle endianness issues for mn10300.
1754 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1756 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1758 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1759 instruction. Fix opcode field for "movb (imm24),dn".
1761 * mn10200-opc.c (mn10200_operands): Fix insertion position
1764 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1766 * mn10200-opc.c: Create mn10200 opcode table.
1767 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1768 but moving along nicely.
1770 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1772 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1774 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1776 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1777 specifiers for fmovem* instructions.
1779 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1781 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1783 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1785 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1788 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1790 * mn10300-opc.c: Add some comments explaining the various
1793 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1795 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1797 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1800 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1801 operand specifiers in fmovm* instructions.
1803 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1805 * ppc-opc.c (insert_li): Give an error if the offset has the two
1806 least significant bits set.
1808 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1810 * mips-dis.c (print_insn_mips16): Separate the instruction from
1811 the arguments with a tab, not a space.
1813 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1815 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1818 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1821 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1823 * configure: Rebuild with autoconf 2.12.
1825 Add support for mips16 (16 bit MIPS implementation):
1826 * mips16-opc.c: New file.
1827 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1828 (mips16_reg_names): New static array.
1829 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1830 after seeing a 16 bit symbol.
1831 (print_insn_little_mips): Likewise.
1832 (print_insn_mips16): New static function.
1833 (print_mips16_insn_arg): New static function.
1834 * mips-opc.c: Add jalx instruction.
1835 * Makefile.in (mips16-opc.o): New target.
1836 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1837 * configure: Rebuild.
1839 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1841 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1842 operand specifiers in *save, *restore and movem* instructions.
1844 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1847 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1848 register operands for immediate arithmetic, not, neg, negx, and
1849 set according to condition instructions.
1851 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1852 specifier of the effective-address operand in immediate forms of
1853 arithmetic instructions. The specifier for the immediate operand
1854 notes how and where the constant will be stored.
1856 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1858 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1861 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1864 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1866 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1868 * mn10300-dis.c (disassemble): Handle register lists.
1870 * mn10300-opc.c: Fix handling of register list operand for
1871 "call", "ret", and "rets" instructions.
1873 * mn10300-dis.c (disassemble): Print PC-relative and memory
1874 addresses symbolically if possible.
1875 * mn10300-opc.c: Distinguish between absolute memory addresses,
1876 pc-relative offsets & random immediates.
1878 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1880 (disassemble): Handle SPLIT and EXTENDED operands.
1882 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1884 * mn10300-dis.c: Rough cut at printing some operands.
1886 * mn10300-dis.c: Start working on disassembler support.
1887 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1889 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1891 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1893 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1895 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1897 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1899 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1900 register argument is calls and jmp instructions.
1902 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1904 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1905 getx operand. Fix opcode for mulqu imm,dn.
1907 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1909 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1910 in MN10300_OPERAND_SPLIT operands for how many bits
1911 appear in the basic insn word. Add IMM32_HIGH24,
1912 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1913 (mn10300_opcodes): Use new operands as needed.
1915 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1916 for bset, bclr, btst instructions.
1917 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1919 * mn10300-opc.c (mn10300_operands): Remove many redundant
1920 operands. Update opcode table as appropriate.
1921 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1922 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1924 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1926 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1927 operands (for indexed load/stores). Fix bitpos for DI
1928 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1929 few instructions that insert immediates/displacements in the
1930 middle of the instruction. Add IMM8E for 8 bit immediate in
1931 the extended part of an instruction.
1932 (mn10300_operands): Use new opcodes as appropriate.
1934 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1936 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1937 sequential so the assembler never parallelizes it with
1940 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1942 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1943 a data/address register that appears in register field 0
1944 and register field 1.
1945 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1947 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1949 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1950 standard disassembly.
1952 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1953 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1954 Recategorize PALcode instructions.
1956 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1958 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1960 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1962 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1963 there are no operand types.
1965 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1967 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1969 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1971 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1973 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1975 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1977 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1978 and sst.w instructions.
1980 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1983 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1985 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1988 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1990 * ppc-opc.c (PPCPWR2): Define.
1991 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1994 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1996 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1997 field for movhu instruction.
1999 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2000 cast value to "long" not "signed long" to keep hpux10
2003 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2005 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2008 * mn10300-opc.c (FMT*): Remove definitions.
2010 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2011 for shift-by-register opcodes.
2013 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2014 into [AD][MN][01] for encoding the position of the register
2017 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2019 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2020 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2022 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2024 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2025 Fix various typos. Add "PAREN" operand.
2026 (MEM, MEM2): Define.
2027 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2028 operands. Fix several typos.
2030 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2033 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2035 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2036 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2038 (mn10300_opcodes): Break opcode format out into its own field.
2039 Update many operand fields to deal with signed vs unsigned
2040 issues. Fix one or two typos in the "mov" instruction
2041 opcode, mask and/or operand fields.
2043 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2045 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2046 m68851 wasn't reset.
2048 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2050 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2051 all opcodes. Very rough cut at operands for all opcodes.
2053 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2056 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2058 * mn10200-opc.c, mn10300-opc.c: New files.
2059 * mn10200-dis.c, mn10300-dis.c: New files.
2060 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2061 * disassemble.c: Break mn10x00 support into 10200 and 10300
2063 * configure.in: Likewise.
2064 * configure: Rebuilt.
2066 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2068 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2070 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2072 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2074 * disassemble (ARCH_mn10x00): Define.
2075 (disassembler): Handle bfd_arch_mn10x00.
2076 * configure.in: Recognize bfd_mn10x00_arch.
2077 * configure: Rebuilt.
2079 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2081 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2082 accordingly. Don't declare functions using op_rtn.
2084 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2086 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2087 params to be more standard.
2088 * (disassemble): Print absolute addresses and symbolic names for
2089 branch and jump targets.
2090 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2092 * (v850_opcodes): Add breakpoint insn.
2094 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2096 * m68k-opc.c: Move the fmovemx data register cases before the
2097 other cases, so that they get recognized before the data register
2098 does gets treated as a degenerate register list.
2100 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2102 * mips-opc.c: Add a case for "div" and "divu" with two registers
2103 and a destination of $0.
2105 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2107 * mips-dis.c (print_insn_arg): Add prototype.
2108 (_print_insn_mips): Ditto.
2110 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2112 * mips-dis.c (print_insn_arg): Print condition code registers as
2115 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2117 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2119 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2121 * v850-dis.c (disassemble): Make static. Provide prototype.
2123 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2125 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2128 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2130 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2131 ']' characters into the output stream.
2132 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2133 Add "memop" field to all opcodes (for the disassembler).
2134 Reorder opcodes so that "nop" comes before "mov" and "jr"
2135 comes before "jarl".
2137 * v850-dis.c (print_insn_v850): Fix typo in last change.
2139 * v850-dis.c (print_insn_v850): Properly handle disassembling
2140 a two byte insn at the end of a memory region when the memory
2141 region's size is only two byte aligned.
2143 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2145 * v850-dis.c (v850_reg_names): Define.
2146 (v850_sreg_names, v850_cc_names): Likewise.
2147 (disassemble): Very rough cut at printing operands (unformatted).
2149 * v850-opc.c (BOP_MASK): Fix.
2150 (v850_opcodes): Fix mask for jarl and jr.
2152 * v850-dis.c: New file. Skeleton for disassembler support.
2153 * Makefile.in Remove v850 references, they're not needed here.
2154 * configure.in: Add v850-dis.o when building v850 toolchains.
2155 * configure: Rebuilt.
2156 * disassemble.c (disassembler): Call v850 disassembler.
2158 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2159 (insert_d8_6, extract_d8_6): New functions.
2160 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2161 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2163 (IF4A, IF4B): Use "D7" instead of "D7S".
2164 (IF4C, IF4D): Use "D8_7" instead of "D8".
2165 (IF4E, IF4F): New. Use "D8_6".
2166 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2167 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2169 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2170 (v850_operands): Change D16 to D16_15, use special insert/extract
2171 routines. New new D16 that uses the generic insert/extract code.
2172 (IF7A, IF7B): Use D16_15.
2173 (IF7C, IF7D): New. Use D16.
2174 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2176 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2177 message. Issue an error if the branch offset is odd.
2179 * v850-opc.c: Add notes about needing special insert/extract
2180 for all the load/store insns, except "ld.b" and "st.b".
2182 * v850-opc.c (insert_d22, extract_d22): New functions.
2183 (v850_operands): Use insert_d22 and extract_d22 for
2185 (insert_d9): Fix range check.
2187 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2189 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2190 and set bits field to D9 and D22 operands.
2192 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2194 * v850-opc.c (v850_operands): Define SR2 operand.
2195 (v850_opcodes): "ldsr" uses R1,SR2.
2197 * v850-opc.c (v850_opcodes): Fix opcode specs for
2198 sld.w, sst.b, sst.h, sst.w, and nop.
2200 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2202 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2203 end of the opcode table.
2205 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2207 * d10v-opc.c (pre_defined_registers): Added register pairs,
2208 "r0-r1", "r2-r3", etc.
2210 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2212 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2213 Create I16U for an unsigned 16bit mmediate operand.
2214 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2216 * v850-opc.c (v850_operands): Define EP operand.
2217 (IF4A, IF4B, IF4C, IF4D): Use EP.
2219 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2220 with immediate operand, "movhi". Tweak "ldsr".
2222 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2223 correct. Get sld.[bhw] and sst.[bhw] closer.
2225 * v850-opc.c (v850_operands): "not" is a two byte insn
2227 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2229 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2231 * v850-opc.c (two): Get order of words correct.
2233 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2235 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2236 register source and destination operands.
2237 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2239 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2240 same thinko in "trap" opcode.
2242 * v850-opc.c (v850_opcodes): Add initializer for size field
2245 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2246 Add D8 for 8-bit unsigned field in short load/store insns.
2247 (IF4A, IF4D): These both need two registers.
2248 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2249 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2250 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2251 for "ldsr" and "stsr".
2252 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2255 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2256 short store word (sst.w).
2258 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2260 * v850-opc.c (v850_operands): Added insert and extract fields,
2261 pointers to functions that handle unusual operand encodings.
2263 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2265 * v850-opc.c (v850_opcodes): Enable "trap".
2267 * v850-opc.c (v850_opcodes): Fix order of displacement
2268 and register for "set1", "clr1", "not1", and "tst1".
2270 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2272 * v850-opc.c (v850_operands): Add "B3" support.
2273 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2276 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2278 * v850-opc.c: Close unterminated comment.
2280 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2282 * v850-opc.c (v850_operands): Add flags field.
2283 (v850_opcodes): add move opcodes.
2285 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2287 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2288 * configure: (bfd_v850v_arch) Add new case.
2289 * configure.in: (bfd_v850_arch) Add new case.
2290 * v850-opc.c: New file.
2292 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2294 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2296 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2298 * d10v-opc.c: Add additional information to the opcode
2299 table to help determinine which instructions can be done
2302 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2304 * mpw-make.sed: Update editing of include pathnames to be
2307 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2309 * arm-opc.h: Added "bx" instruction definition.
2311 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2313 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2315 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2317 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2319 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2321 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2323 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2325 * makefile.vms: Update for alpha-opc changes.
2327 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2329 * i386-dis.c (print_insn_i386): Actually return the correct value.
2330 (ONE, OP_ONE): #ifdef out; not used.
2332 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2334 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2335 Changed subi operand type to treat 0 as 16.
2337 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2339 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2342 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2344 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2345 memory transfer instructions. Add new format string entries %h and %s.
2346 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2349 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2351 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2352 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2354 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2356 * alpha-dis.c (print_insn_alpha_osf): Remove.
2357 (print_insn_alpha_vms): Remove.
2358 (print_insn_alpha): Make globally visible. Chose the register
2359 names based on info->flavour.
2360 * disassemble.c: Always return print_insn_alpha for the alpha.
2362 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2364 * d10v-dis.c (dis_long): Handle unknown opcodes.
2366 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2368 * d10v-opc.c: Changes to support signed and unsigned numbers.
2369 All instructions with the same name that have long and short forms
2370 now end in ".l" or ".s". Divs added.
2371 * d10v-dis.c: Changes to support signed and unsigned numbers.
2373 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2375 * d10v-dis.c: Change all functions to use info->print_address_func.
2377 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2379 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2380 move ccr/sr insns more strict so that the disassembler only
2381 selects them when the addressing mode is data register.
2383 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2384 * d10v-opc.c (pre_defined_registers): Declare.
2385 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2386 to pick a better name for the registers.
2388 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2390 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2391 operands for fexpand and fpmerge. From Christian Kuehnke
2392 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2394 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2396 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2397 print routine. Take new regnames and cpumask arguments.
2398 Kill the environment variable nonsense.
2399 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2400 (print_insn_alpha_vms): New function. Do VMS style regnames.
2401 * disassemble.c (disassembler): Test bfd flavour to pick
2402 between OSF and VMS routines. Default to OSF.
2404 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2406 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2407 * configure: Rebuild.
2408 * Makefile.in (install): Use @INSTALL_SHLIB@.
2410 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2412 * configure: (bfd_d10v_arch) Add new case.
2413 * configure.in: (bfd_d10v_arch) Add new case.
2414 * d10v-dis.c: New file.
2415 * d10v-opc.c: New file.
2416 * disassemble.c (disassembler) Add entry for d10v.
2418 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2420 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2421 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2423 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2425 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2426 distinguish between variants of the instruction set.
2427 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2428 distinguish between variants of the instruction set.
2430 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2432 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2433 the 8086 instruction set.
2434 * i386-dis.c: General cleanups. Make most things static. Add
2435 prototypes. Get rid of static variables aflags and dflags. Pass
2436 them as args (to almost everything).
2438 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2440 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2442 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2444 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2445 if the next arg is marked with SRC_IN_DST. Gross.
2447 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2448 we're looking for and find EXR.
2450 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2451 if we're looking for KBIT and we don't find it.
2453 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2456 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2457 3bit immediate operands.
2459 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2461 * Released binutils 2.7.
2463 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2464 <kkaempf@progis.ac-net.de>.
2466 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2468 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2470 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2472 * sparc-dis.c (print_insn_sparclite): New routine to print
2473 sparclite instructions.
2475 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2477 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2479 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2481 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2482 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2483 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2485 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2487 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2488 Use autoconf-set values.
2489 (docdir, oldincludedir): Removed.
2490 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2492 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2494 * alpha-opc.c: New file.
2495 * alpha-opc.h: Remove.
2496 * alpha-dis.c: Complete rewrite to use new opcode table.
2497 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2498 * configure: Rebuild with autoconf 2.10.
2499 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2500 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2502 (alpha-opc.o): New target.
2504 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2506 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2507 Set imm_added_to_rs1 even if the source and destination register
2510 * sparc-opc.c: Add some two operand forms of the wr instruction.
2512 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2514 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2517 * disassemble.c (disassembler): Handle H8/S.
2518 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2520 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2522 * sparc-opc.c: Add beq/teq as aliases for be/te.
2524 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2525 <sergei@msil.sps.mot.com>.
2527 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2529 * makefile.vms: New file.
2531 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2533 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2535 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2538 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2540 * i386-dis.c (OP_OFF): Call append_prefix.
2542 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2544 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2545 unsigned long to silence a warning from the Solaris PowerPC
2548 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2550 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2552 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2554 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2556 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2557 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2558 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2559 cpush, cpusha, cpull sparclet insns.
2561 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2563 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2565 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2567 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2568 Set F_FLOAT on other floating point instructions.
2570 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2572 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2574 (powerpc_opcodes): Add 860/821 specific SPRs.
2576 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2578 * configure.in: Permit --enable-shared to specify a list of
2579 directories. Set and substitute BFD_PICLIST.
2580 * configure: Rebuild.
2581 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2582 uses. Set to @BFD_PICLIST@.
2584 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2586 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2587 not "abs", which may be needed for the absolute in something
2588 like btst #0,@10:8. Print L_3 immediates separately from other
2589 immediates. Change ABSMOV reference to ABS8MEM.
2591 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2593 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2594 (current_arch_mask): New static global.
2595 (compute_arch_mask): New static function.
2596 (print_insn_sparc): Delete sparc_v9_p. New static local
2597 current_mach. Resort opcode table if current_mach changes.
2598 Generalize "insn not supported" test.
2599 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2600 Delete test for v9/!v9.
2601 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2603 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2604 (brfcx): Renamed to FBRX.
2605 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2606 coprocessor mnemonics are not supported on the sparclet).
2607 (condf): Renamed to CONDF.
2608 (SLCBCC2): Delete F_ALIAS flag.
2610 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2612 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2613 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2615 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2617 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2618 that the shared library version number is set correctly.
2620 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2622 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2623 Miles Bader <miles@gnu.ai.mit.edu>.
2624 * configure: Rebuild.
2626 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2628 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2631 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2633 * configure: Rebuild with autoconf 2.8.
2635 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2637 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2638 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2640 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2642 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2643 since they appear as targets in Makefile.in.
2644 * configure: Rebuild.
2646 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2648 * mpw-make.sed: Edit out shared library support bits.
2650 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2652 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2653 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2654 (sparc_opcodes): Add sparclet insns.
2655 (sparclet_cpreg_table): New static local.
2656 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2657 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2659 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2661 * i386-dis.c (index16): New static variable.
2662 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2664 (OP_indirE): Return result of OP_E.
2665 (OP_E): Check for 16 bit addressing mode, and disassemble
2666 correctly. Optimised 32 bit case a little. Don't print
2667 "(base,index,scale)" when sib specifies only an offset.
2669 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2671 * configure.in: Set and substitute SHLIB_DEP.
2672 * configure: Rebuild.
2673 * Makefile.in (SHLIB_DEP): New variable.
2674 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2675 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2676 COMMON_SHLIB, add them to piclist with appropriate modifications.
2677 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2678 here: just use piclist.
2680 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2682 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2683 (print_insn_sparc): Rewrite v9/not-v9 tests.
2684 (compare_opcodes): Likewise.
2685 * sparc-opc.c (MASK_<ARCH>): Define.
2686 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2687 (sparclet,v6notv9): Define.
2688 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2689 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2691 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2693 * configure.in: Call AC_PROG_CC before configure.host.
2694 * configure: Rebuild.
2696 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2698 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2700 * i386-dis.c (onebyte_has_modrm): New static array.
2701 (twobyte_has_modrm): New static array.
2702 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2704 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2706 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2709 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2711 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2714 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2716 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2717 m68010up, not just m68020up | cpu32.
2719 * Makefile.in (SONAME): New variable.
2720 ($(SHLINK)): Make a link to the transformed name, as well.
2721 (stamp-tshlink): New target.
2722 (install): Skip stamp-tshlink during install.
2724 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2726 * configure.in: Call AC_ARG_PROGRAM.
2727 * configure: Rebuild.
2728 * Makefile.in (program_transform_name): New variable.
2729 (install): Transform library name before installing it.
2731 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2733 * i960-dis.c (mem): Add HX dcinva instruction.
2735 Support for building as a shared library, based on patches from
2736 Alan Modra <alan@spri.levels.unisa.edu.au>:
2737 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2738 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2739 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2740 * configure: Rebuild.
2741 * Makefile.in (ALLLIBS): New variable.
2742 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2743 (COMMON_SHLIB, SHLINK): New variables.
2744 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2745 (STAGESTUFF): Remove variable.
2746 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2747 (stamp-piclist, piclist): New targets.
2748 ($(SHLIB), $(SHLINK)): New targets.
2749 ($(OFILES)): Depend upon stamp-picdir.
2750 (disassemble.o): Build twice if PICFLAG is set.
2751 (MOSTLYCLEAN): Add pic/*.o.
2752 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2753 (distclean): Remove pic and stamp-picdir.
2754 (install): Install shared libraries.
2755 (stamp-picdir): New target.
2757 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2759 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2760 Print unknown instruction as "unknown", rather than in hex.
2762 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2764 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2766 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2768 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2770 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2772 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2773 when necessary. From Ulrich Drepper
2774 <drepper@myware.rz.uni-karlsruhe.de>.
2776 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2778 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2779 sparc_num_opcodes. Update architecture enum values.
2780 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2781 (sparc_opcode_lookup_arch): New function.
2782 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2783 (sparc_opcodes): Add v9a shutdown insn.
2785 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2787 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2788 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2790 (print_insn_sparc64): Deleted.
2791 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2794 * sparc-opc.c (architecture_pname): Add v9a.
2796 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2798 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2799 incorrectly defined as 0x16 when it should be 0x15.
2800 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2801 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2802 excb (exception barrier) which is defined in the Alpha
2803 Architecture Handbook version 2.
2804 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2805 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2806 disassembled as or, for example.
2808 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2810 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2811 (_print_insn_mips): Change i from int to unsigned int.
2813 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2815 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2816 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2818 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2820 * i386-dis.c: Added Pentium Pro instructions.
2822 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2824 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2827 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2829 * sh-opc.h (sh_nibble_type): Added REG_B.
2830 (sh_arg_type): Added A_REG_B.
2831 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2833 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2835 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2837 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2839 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2841 * Makefile.in (distclean): Remove stamp-h. From Ronald
2842 F. Guilmette <rfg@monkeys.com>.
2844 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2846 From David Mosberger-Tang <davidm@azstarnet.com>:
2847 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2850 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2852 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2853 (sh_table): Added many SH3 opcodes.
2854 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2856 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2858 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2859 (subco,subco.): Mark this PPC, not PPCCOM.
2861 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2863 * configure: Rebuild with autoconf 2.7.
2865 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2867 * configure: Rebuild with autoconf 2.6.
2869 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2871 * configure.in: Sort list of architectures. Accept but do nothing
2872 for alliant, convex, pyramid, romp, and tahoe.
2874 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2876 * a29k-dis.c (print_special): Change num to unsigned int.
2878 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2880 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2883 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2885 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2886 * configure: Rebuilt.
2888 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2890 * configure.in: Add case for bfd_i860_arch.
2891 * configure: Rebuild.
2893 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2895 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2896 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2897 (NEXTDOUBLE): Likewise.
2898 (print_insn_m68k): Don't match fmoveml if there is more than one
2899 register in the list.
2900 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2902 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2904 * m68k-opc.c: Use #W rather than #w.
2905 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2907 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2909 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2910 and likewise for all the dbxx opcodes.
2912 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2914 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2916 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2918 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2919 the VR4100 specific instructions to the mips_opcodes structure.
2921 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2923 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2924 ugly Metrowerks bug in CW6, is fixed in CW7.
2926 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2928 * ppc-opc.c (whole file): Add flags for common/any support.
2930 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2932 * Makefile.in (BISON): Remove macro.
2933 (FLAGS_TO_PASS): Remove BISON.
2935 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2937 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2939 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2940 instructions that take no args by looking at the match mask.
2941 (print_insn_arg): Always print "%" before register names.
2942 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2943 [case '_']: Don't print "@#" before address.
2944 [case 'J']: Use "%s" as format string, not register name.
2945 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2947 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2949 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2952 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2954 From David Mosberger-Tang <davidm@azstarnet.com>
2956 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2957 (alpha_insn_set): added definitions for VAX floating point
2958 instructions (Unix compilers don't generate these, but handcoded
2959 assembly might still use them).
2961 * alpha-dis.c (print_insn_alpha): added support for disassembling
2962 the miscellaneous instructions in the Alpha instruction set.
2964 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2966 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2967 no longer create sysdep.h, sed ppc-opc.c to work around a
2968 serious Metrowerks C bug.
2969 * mpw-make.in: Remove.
2970 * mpw-make.sed: New file, used by mpw-configure to edit
2971 Makefile.in into an MPW makefile.
2973 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2975 * Makefile.in (maintainer-clean): New synonym for realclean.
2977 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2979 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2980 which use '0', '1', and '2' instead. Specify the proper size for
2981 a pmove immediate operand. Correct the pmovefd patterns to be
2982 moves to a register, not from a register.
2983 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2985 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2987 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2988 %psr, %wim, %tbr as F_NOTV9.
2990 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2992 * Makefile.in (Makefile): Just rebuild Makefile when running
2994 (config.h, stamp-h): New targets.
2995 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2996 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2997 rebuilding config.h.
2998 * configure: Rebuild.
3000 * mips-opc.c: Change unaligned loads and stores with "t,A"
3001 operands to use "t,A(b)".
3003 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3005 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3007 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3009 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3010 until 3 instead of until 2.
3012 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3014 * Makefile.in (ALL_CFLAGS): Define.
3015 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3016 (MOSTLYCLEAN): Add config.log.
3017 (distclean): Don't remove config.log.
3018 * configure.in: Substitute HDEFINES.
3019 * configure: Rebuild.
3021 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3023 * sh-opc.h (sh_arg_type): Add F_FR0.
3024 (sh_table, case fmac): Add F_FR0 as first argument.
3026 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3028 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3030 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3032 * sparc-dis.c: Remove all references to NO_V9.
3034 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3036 * aclocal.m4: Just include ../bfd/aclocal.m4.
3037 * configure: Rebuild.
3039 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3041 * sparc-dis.c (X_DISP19): Define.
3042 (print_insn, case 'G'): Use it.
3043 (print_insn, case 'L'): Sign extend displacement.
3045 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3047 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3048 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3049 host_makefile_frag or frags.
3050 * aclocal.m4: New file.
3051 * configure: Rebuild.
3052 * Makefile.in (INSTALL): Set to @INSTALL@.
3053 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3054 (INSTALL_DATA): Set to @INSTALL_DATA@.
3056 (AR_FLAGS): Set to rc rather than qc.
3057 (CC): Define as @CC@.
3058 (CFLAGS): Set to @CFLAGS@.
3059 (@host_makefile_frag@): Remove.
3060 (config.status): Remove dependency upon @frags@.
3062 * configure.in: ../bfd/config.bfd now just sets shell variables.
3063 Use them rather than looking through target Makefile fragments.
3064 * configure: Rebuild.
3066 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3068 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3070 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3072 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3073 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3076 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3077 (lookup_{name,value}): New functions.
3078 (prefetch_table): New static local.
3079 (sparc_{encode,decode}_prefetch): New functions.
3080 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3082 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3084 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3087 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3089 * sh-dis.c: Correct comment on first line of file.
3091 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3093 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3095 * sparc-opc.c (asi, membar): New static locals.
3096 (sparc_{encode,decode}_{asi,membar}): New functions.
3097 (sparc_opcodes, membar insn): Fix.
3098 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3099 Support decoding of membar masks.
3102 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3104 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3106 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3108 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3109 and likewise for the other branches. Add bhs as an alias for bcc,
3110 and likewise for the size variants. Add dbhs as an alias for
3113 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3115 * sh-opc.h (FP sts instructions): Update to match reality.
3117 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3119 * m68k-dis.c: (fpcr_names): Add % before all register names.
3120 (reg_names): Likewise.
3121 (print_insn_arg): Don't explicitly print % before register names.
3122 Add % before register names in static array names. In case 'r',
3123 print data registers as `@(Dn)', not `Dn@'. When printing a
3124 memory address, don't print @# before it.
3125 (print_indexed): Change base_disp and outer_disp from int to
3126 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3127 syntax. Sign extend 8 byte displacement correctly.
3128 (print_base): Print using MIT syntax. Print zpc when appropriate.
3129 Change parameter disp from int to bfd_vma.
3131 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3134 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3136 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3137 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3138 * sh-opc.h (sh_arg_type): Add new operand types.
3139 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3141 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3143 * Makefile.in (distclean): Remove generated file config.h.
3145 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3147 * Makefile.in (distclean): Remove generated file config.h.
3149 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3151 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3153 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3155 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3156 rather than numopcodes. Use m68k_opcodes rather than removed
3157 opcode function. Don't check F_ALIAS.
3158 (print_insn_arg): Change first parameter to be const char *.
3159 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3160 (m68k-opc.o): New target.
3161 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3162 * configure: Rebuild.
3164 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3166 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3167 (opcode_bits, opcode_hash_table): New variables.
3168 (opcodes_initialized): Renamed from opcodes_sorted.
3169 (build_hash_table): New function.
3170 (is_delayed_branch): Use hash table.
3171 (print_insn): Renamed from print_insn_sparc, made static.
3172 Build and use hash table. If !sparc64, ignore sparc64 insns,
3173 and vice-versa if sparc64.
3174 (print_insn_sparc, print_insn_sparc64): New functions.
3175 (compare_opcodes): Move sparc64 opcodes to end.
3176 Print commutative insns with constant second.
3177 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3179 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3181 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3182 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3183 avoids printing a delay slot in a delay slot.
3184 * sh-opc.h (sh_table): Fully bracket last entry.
3186 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3188 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3190 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3192 * configure.in: Get host_makefile_frag from ${srcdir}.
3194 * configure.in: Autoconfiscated. Check for string[s].h. Create
3195 config.h from config.in. Don't set up sysdep.h link.
3196 * sysdep.h: New file.
3197 * configure, config.in: New files, generated from configure.in.
3198 * Makefile.in: Updated to be processed autoconf-style.
3199 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3200 (Makefile): Depend on config.status.
3201 (config.status): New rule.
3202 * configure.bat: Update Makefile substitutions.
3204 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3206 * mips-opc.c (L1): Define.
3207 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3208 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3211 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3213 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3214 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3215 have multiple add units but only a single logical unit.
3217 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3218 shifted by 18, without any insertion or extraction function.
3219 (insert_cr, extract_cr): Remove.
3221 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3223 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3226 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3228 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3229 * sh-opc.h: Add copyright.
3231 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3233 * Makefile.in (crunch-m68k): Delete extra target accidentally
3234 checked in a while ago.
3236 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3238 * sh-opc.h (sh_table): Add SH3 support.
3240 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3242 * sh-opc.h: Added bsrf and braf.
3244 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3246 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3247 bogus [ls]fm{ea,fd} patterns.
3249 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3250 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3251 initialize it from memory. Make function static.
3252 (print_insn_{big,little}_arm): New functions.
3253 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3254 the correct endianness.
3256 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3258 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3261 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3263 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3264 17th, so that it builds again using GCC as the compiler.
3266 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3268 * mips-dis.c (print_insn_little_mips): Cast return value from
3269 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3270 expects an unsigned long, and that might be fewer words of
3271 argument storage (e.g., if bfd_vma is long long on a 32-bit
3273 (print_insn_big_mips): Likewise with bfd_getb32 value.
3274 (_print_insn_mips): Now static.
3276 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3278 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3279 gcc memory hog problem with initializer is fixed.
3281 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3283 Merge in support for Mac MPW as a host.
3284 (Old change descriptions retained for informational value.)
3286 * mpw-config.in (archname): Compute from the config.
3287 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3289 * mpw-config.in (target_arch): Compute from canonical target.
3290 (m68k, mips, powerpc, sparc): Add architectures.
3291 * mpw-make.in (disassemble.c.o): Add.
3292 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3294 * mpw-config.in (BFD_MACHINES): Set to a default value.
3295 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3297 * mpw-make.in (CSEARCH): Add extra-include to search path.
3299 * mpw-config.in (varargs.h): Don't create.
3300 (sysdep.h): Create using forward-include.
3301 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3303 * mpw-config.in: New file, MPW version of configure.in.
3304 * mpw-make.in: New file, MPW version of Makefile.in.
3306 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3308 * alpha-dis.c (print_insn_alpha): Put empty statement after
3311 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3313 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3314 (low_sign_extend): Likewise.
3315 (get_field): Delete unused function.
3316 (set_field, deposit_14, deposit_21): Likewise.
3318 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3320 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3323 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3325 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3327 * alpha-opc.h (OSF_ASMCODE): define
3328 print pal-code names as defined in App C of the
3329 Alpha Architecture Reference Manual
3331 * alpha-dis.c: cleaned up output
3332 print stylized code forms as defined in App A.4.3 of the
3333 Alpha Architecture Reference Manual
3335 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3337 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3339 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3342 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3344 * m68k-dis.c (opcode): New function. Returns address of opcode
3345 table entry given index, even if the opcode table was split to
3346 work around gcc bugs.
3347 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3349 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3350 (reg_names): Now const.
3351 (print_insn_arg): Arrays cacheFieldName and names now const.
3352 (print_indexed): Array scales now const.
3354 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3356 * ppc-opc.c: Sort recently added instructions by minor opcode
3357 number within major opcode number.
3359 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3361 * hppa-dis.c: Include libhppa.h.
3363 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3365 * mips-opc.c: Change dli to use M_DLI, and add dla.
3367 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3369 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3371 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3373 * mips-opc.c: Add r4650 mul instruction.
3375 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3377 * mips-opc.c: Add uld and usd macros for unaligned double load and
3380 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3382 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3383 mfdcr, mtdcr, icbt, iccci.
3385 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3387 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3388 signed char fields to shorts, more portable.
3390 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3392 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3393 char fields as signed chars, since they may have negative values.
3395 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3397 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3398 (mycroft@netbsd.org).
3400 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3402 From "Logg, Ed" <elogg@ea.com>:
3403 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3404 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3407 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3409 * ppc-opc.c: Changes based on patch from David Edelsohn
3410 <edelsohn@mhpcc.edu>.
3411 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3414 (insert_tbr): New static function.
3415 (extract_tbr): New static function.
3416 (XFXFXM_MASK, XFXM): Define.
3417 (XSPRBAT_MASK, XSPRG_MASK): Define.
3418 (powerpc_opcodes): Add instructions to access special registers by
3419 name. Add mtcr and mftbu.
3421 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3423 * mips-opc.c (P3): Define.
3424 (mips_opcodes): Add mad and madu.
3426 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3428 * configure.in: Add W65 support.
3429 * disassemble.c: Likewise.
3430 * w65-opc.h, w65-dis.c: New files.
3432 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3434 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3437 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3439 * mips-opc.c: Add dli as a synonym for li.
3441 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3443 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3444 print something for reserved opcode values, even if it won't
3447 * mips-dis.c (_print_insn_mips): When initializing, shift right
3448 and mask, to avoid sign extension problems on the Alpha.
3450 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3453 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3455 * sh-opc.h (mov.l gbr): Get direction right.
3456 * sh-dis.c (print_insn_shx): New function.
3457 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3458 print opcodes with right byte order.
3460 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3462 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3463 to avoid conflicts with getopt.
3465 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3467 * hppa-dis.c (print_insn_hppa): Read the instruction using
3468 bfd_getb32, so that it works on a little endian or 64 bit host.
3469 Remove unused local variable op.
3471 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3473 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3474 addu does not work correctly if -mips3.
3476 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3478 * a29k-dis.c (print_special): Add special register names defined
3479 on 29030, 29040 and 29050.
3480 (print_insn): Handle new operand type 'I'.
3482 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3484 * Makefile.in (INSTALL): Use top level install.sh script.
3486 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3488 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3489 that it works on a little endian host.
3491 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3493 * configure.in: Use ${config_shell} when running config.bfd.
3495 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3497 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3499 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3501 * a29k-dis.c (print_insn): Print the opcode.
3503 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3505 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3507 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3509 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3511 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3513 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3514 which store a value into memory.
3516 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3518 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3519 * arm-dis.c, arm-opc.h: New files.
3521 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3523 * Makefile.in (ns32k-dis.o): Add dependency.
3524 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3525 string, not as array of chars.
3527 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3529 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3531 * sparc-opc.c: Added sparclite extended FP operations, and
3532 versions of v9 impdep* instructions permitting specification of
3535 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3537 * i960-dis.c (reg_names): Now const.
3538 (struct sparse_tabent): New type, copied from array type in mem
3540 (ctrl): Local static array ctrl_tab now const.
3541 (cobr): Local static array cobr_tab now const.
3542 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3543 static variable mem_tab no longer explicitly initialized. Changed
3544 mem_init to const array of struct sparse_tabent.
3545 (reg): Local static variable reg_tab no longer explicitly
3546 initialized. Changed reg_init to const array of struct
3548 (ea): Local static array scale_tab now const.
3550 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3553 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3555 * configure.bat: the disassember needs to be enabled for
3556 "objdump -d" to work in djgpp.
3558 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3560 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3561 (invalid_float): Enabled general version, doesn't require running
3562 on ns32k host. Changed to take char* argument, and test for
3563 explicitly specified sizes, instead of using sizeof() on host CPU
3565 (INVALID_FLOAT): Cast first argument.
3566 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3567 list_P032, list_M032): Now const.
3568 (optlist, list_search): Made appropriate arguments now point to
3570 (print_insn_arg): Changed static array of one-character-string
3571 pointers into a static const array of characters; fixed sprintf
3572 statement accordingly.
3574 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3576 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3577 from distribution. A ns32k-dis.c from a previous distribution has
3578 been brought up to date and supports the new interface.
3580 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3582 * configure.in: add bfd_ns32k_arch target support.
3584 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3585 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3587 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3589 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3592 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3594 * h8300-dis.c, mips-dis.c: Don't use true and false.
3596 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3598 * configure.in: Change --with-targets to --enable-targets.
3600 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3602 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3603 opcodes to the first instruction with that opcode, to speed
3604 disassembly of large files. From ralphc@pyramid.com (Ralph
3607 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3609 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3611 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3613 * configure.bat: update to latest makefile.in
3615 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3617 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3618 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3619 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3620 slot insn is in a delay slot.
3621 * z8k-opc.h: (resflg): Fix patterns.
3622 * h8500-opc.h Fix CR insn patterns.
3624 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3626 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3627 "cmpl" before POWER versions, so that gas -many uses them.
3629 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3631 * disassemble.c: New file.
3632 * Makefile.in (OFILES): Add disassemble.o.
3633 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3634 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3635 binutils/configure.in.
3637 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3638 opcode being examined.
3640 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3642 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3643 (insert_ral, insert_ram, insert_ras): New functions.
3644 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3645 RAS for store with update.
3647 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3649 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3650 (edelsohn@npac.syr.edu).
3652 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3654 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3657 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3659 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3661 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3663 * ppc-opc.c (powerpc_operands): The signedp field has been
3664 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3665 instead. Add new operand SISIGNOPT.
3666 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3667 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3668 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3671 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3673 * i386-dis.c (struct private): Renamed to dis_private. `private'
3674 is a reserved word for dynix cc.
3676 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3678 * configure.in: Change error message to refer to bfd/config.bfd
3679 rather than bfd/configure.in.
3681 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3683 * ppc-opc.c: Define POWER2 as short alias flag.
3684 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3687 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3689 * i960-dis.c (print_insn_i960): Don't read a second word for
3690 opcodes 0, 1, 2 and 3.
3692 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3694 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3696 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3698 * m68881-ext.c: Removed; no longer used.
3699 * Makefile.in: Changed accordingly.
3701 * m68k-dis.c (ext_format_68881): Don't declare.
3702 (print_insn_m68k): If an instruction uses place 'i', it uses at
3703 least four fixed bytes.
3704 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3705 extended float, convert to double using floatformat_to_double, not
3706 ieee_extended_to_double, and fetch the data before converting it.
3708 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3710 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3711 davidj@ICSI.Berkeley.EDU (David Johnson).
3713 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3715 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3716 PowerPC uses bdnz[l][a].
3718 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3720 * dis-buf.c, i386-dis.c: Include sysdep.h.
3722 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3724 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3726 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3727 by Motorola PowerPC 601 with PPC_OPCODE_601.
3728 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3729 Disassemble Motorola PowerPC 601 instructions as well as normal
3730 PowerPC instructions.
3732 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3734 * i960-dis.c (reg, mem): Just use a static array instead of
3737 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3739 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3740 condition name index if this is for a negated condition.
3742 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3743 Floating point format for 'H' operand is backwards from normal
3744 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3745 operands (fmpyadd and fmpysub), handle bizarre register
3746 translation correctly for single precision format.
3748 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3749 or 'I' operands if the next format specifier is 'M' (fcmp
3750 condition completer).
3752 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3754 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3755 single number giving a bitmask for the MB and ME fields of an M
3756 form instruction. Change NB to accept 32, and turn it into 0;
3757 also turn 0 into 32 when disassembling. Seperated SH from NB.
3758 (insert_mbe, extract_mbe): New functions.
3759 (insert_nb, extract_nb): New functions.
3760 (SC_MASK): Mask out SA and LK bits.
3761 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3762 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3763 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3764 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3765 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3766 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3767 (powerpc_macros): Define table of macro definitions.
3768 (powerpc_num_macros): Define.
3770 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3771 if PPC_OPERAND_NEXT is set.
3773 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3775 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3776 char. Retrieve contents using bfd_getl32 instead of shifting.
3778 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3780 * ppc-opc.c: New file. Opcode table for PowerPC, including
3781 opcodes for POWER (RS/6000).
3782 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3783 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3784 (CFILES): Add ppc-dis.c.
3785 (ppc-dis.o, ppc-opc.o): New targets.
3786 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3788 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3790 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3791 No space before 'u', 'f', or 'N'.
3793 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3795 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3796 farther than we should.
3798 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3800 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3802 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3804 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3806 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3807 needs it, to prevent reading past the end of a section.
3809 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3811 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3812 Removed t,A case for la; always use t,A(b) case.
3814 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3816 From Ted Lemen <mellon@pepper.ncd.com>
3817 * mips-dis.c (print_insn_arg): Handle 'k'.
3818 * mips-opc.c: Make cache use k, not t.
3820 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3822 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3823 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3824 FLOAT_FORMAT_CODE to put out floating point register names.
3826 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3828 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3830 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3832 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3834 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3836 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3837 larger than 32. Moved dsxx32 variants first for disassembler.
3839 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3841 * z8kgen.c, z8k-opc.h: Add full lda information.
3843 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3845 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3846 movb instructions. Any necessary space will be emitted by
3847 the code to handle nullification completers.
3849 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3851 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3853 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3855 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3856 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3858 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3860 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3862 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3864 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3865 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3867 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3869 * m88k-dis.c (m88kdis): comment change. Remove space after
3871 (printop): handle new arg types DEC and XREG for m88110.
3873 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3875 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3876 type for absolute branch addresses. Delete special
3877 "ble" and "be" code in 'W' operand code.
3879 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3881 * mips-opc.c: Set hazard information correctly for branch
3882 likely instructions.
3884 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3886 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3887 info->fprintf_func for printing and info->print_address_func for
3890 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3892 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3894 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3896 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3897 Corrected second case of "b" for disassembler.
3899 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3901 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3902 to BFD swapping routines to correspond to BFD name changes.
3904 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3906 * mips-opc.c: Change div machine instruction to be z,s,t rather
3907 than s,t. Change div macro to be d,v,t rather than d,s,t.
3908 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3909 rem and remu which generates only the corresponding div
3910 instruction. This is for compatibility with the MIPS assembler,
3911 which only generates the simple machine instruction when an
3912 explicit destination of $0 is used.
3913 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3915 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3917 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3918 WR_31 hazard for bal, bgezal, bltzal.
3920 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3922 * hppa-dis.c (print_insn_hppa): Use print function
3923 from within the disassemble_info, not fprintf_filtered.
3925 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3927 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3928 Law, law@cs.utah.edu.)
3930 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3932 * mips-opc.c ("absu"): Removed.
3935 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3937 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3938 Changed hazard information to distinguish between memory load
3939 delays and coprocessor load delays.
3941 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3943 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3945 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3947 * configure.in: Don't pass cpu to config.bfd.
3949 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3951 * m88k-dis.c (m88kdis): Make class unsigned.
3953 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3955 * alpha-dis.c (print_insn_alpha): One branch format case was
3956 missing the instruction name.
3958 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3960 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3961 Add the arch-specific auxiliary files.
3962 (OFILES): Remove the arch-specific auxiliary files
3963 and use BFD_MACHINES instead of DIS_LIBS.
3964 * configure.in: Set BFD_MACHINES based on --with-targets option.
3966 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3968 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3971 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3973 * sparc-opc.c: Change CONST to const to deal with gcc
3974 -Dconst=__const -traditional.
3976 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3978 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3979 coprocessor instructions out of #if 0, and made them use new
3982 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3984 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3986 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3988 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3989 instruction, for use by the disassembler.
3991 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3992 hand-coded sign extensions that depended on 32-bit host ints.
3993 FIXME, we still depend on big-endian host bitfield ordering.
3994 (sparc_print_insn): Set the insn_info_valid field, and the
3995 other fields that describe the instruction being printed.
3997 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3999 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4000 `jmp' instead of just one of them.
4002 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4004 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4005 (fput_fp_reg_r): Renamed from fput_reg_r.
4006 (fput_fp_reg): New function.
4007 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4009 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4011 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4013 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4015 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4017 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4018 don't output a space.
4020 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4022 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4024 * mips-opc.c: New file, containing opcode table from
4025 ../include/opcode/mips.h.
4026 * Makefile.in: Add it.
4028 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4030 * m88k-dis.c: New file, moved in from gdb and changed to use the
4031 new dis-asm.h disassembler interface.
4032 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4033 (m88k-dis.o): New target.
4035 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4037 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4038 argument string const char * to correspond to opcode/mips.h.
4040 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4042 * mips-dis.c: Updated to account for name changes in new version
4044 * Makefile.in: Added header file dependencies.
4046 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4048 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4050 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4052 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4053 extend, rather than shifts.
4055 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4057 * Makefile.in: Undo 15 June change.
4059 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4061 * m68k-dis.c (print_insn_arg): Change return value to byte count
4063 * m68k-dis.c: Re-write to detect invalid operands before
4064 printing anything, so we can handle this the same way we
4065 handle invalid opcodes.
4067 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4069 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4071 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4073 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4076 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4078 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4080 * configure.in: Do make sysdep.h link.
4081 * Makefile.in: Search ../include. Don't search ../bfd.
4083 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4085 Changes from Jeff Law, law@cs.utah.edu:
4086 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4087 Do not print a space before the completers specified by
4090 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4092 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4093 defined, since gdb has been fixed.
4095 Changes from Jeff Law, law@cs.utah.edu:
4096 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4097 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4098 be a *disassemble_info, not a *FILE.
4099 * hppa-dis.c: Support 'd', '!', and 'a'.
4100 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4101 * hppa-dis.c: Delete cases which are no longer needed.
4103 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4105 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4107 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4109 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4112 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4114 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4115 * configure.in: No longer need to configure to get sysdep.h.
4117 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4119 * Patches from Jeffrey Law <law@cs.utah.edu>.
4120 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4121 templates for 1.1 FP computational instructions.
4123 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4125 * h8500-dis.c (print_insn_h8500): Address argument is type
4127 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4130 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4131 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4133 * sparc-dis.c (compare_opcodes): Move static declaration to
4136 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4138 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4139 instruction, remove unimp hack from 'l' argument.
4141 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4143 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4146 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4148 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4149 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4152 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4154 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4155 arrays of string pointers to 2-d arrays of chars, to save
4158 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4160 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4161 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4163 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4165 * hppa-dis.c: New file from Utah, adapted to new disassembler
4167 * Makefile.in: Include it.
4169 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4171 * sh-dis.c, sh-opc.h: New files.
4173 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4175 * alpha-dis.c, alpha-opc.h: New files.
4177 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4179 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4182 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4184 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4186 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4188 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4191 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4193 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4194 and double percent signs a few places.
4196 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4198 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4199 Use info->print_address_func not print_address.
4201 * dis-buf.c (generic_print_address): New function.
4203 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4205 * Makefile.in: Add sparc-dis.c.
4206 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4208 Add `add' instruction to the set that get checked
4209 for a preceding `sethi' in order to print an absolute address.
4210 * (print_insn): Disassembly prefers real instructions.
4211 (is_delayed_branch): Speed up.
4212 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4213 Still missing some float ops, and needs testing.
4214 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4215 F_ALIAS. Use printf, not fprintf, when not passing a file
4217 (compare_opcodes): Check that identical instructions have
4218 identical opcodes, complain otherwise.
4221 * Include reg_names.
4223 Use dis-asm.h/read_memory_func interface.
4225 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4227 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4228 deliberately return non-zero to setjmp from longjmp. Otherwise
4229 this code fails to compile.
4231 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4233 * m68k-dis.c: Fix prototype for fetch_arg().
4235 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4237 * dis-buf.c: New file, for new read_memory_func interface.
4238 Makefile.in (OFILES): Include it.
4239 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4240 Use new read_memory_func interface.
4242 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4244 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4245 * h8500-opc.h: Fix couple of opcodes.
4247 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4249 * Makefile.in: add dvi & installcheck targets
4251 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4253 * Makefile.in: Update for h8500-dis.c.
4255 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4257 * h8500-dis.c, h8500-opc.h: New files
4259 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4261 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4262 ../include/dis-asm.h.
4263 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4264 and ../gdb/m68k-pinsn.c).
4265 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4266 and ../gdb/i386-pinsn.c).
4267 * m68881-ext.c: New file. Moved definition of
4268 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4269 * Makefile.in: Adjust for new files.
4270 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4271 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4272 can be dis-assembled.
4274 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4276 * mips-dis.c (print_insn_arg): Now returns void.
4278 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4280 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4281 files that use the macros.
4283 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4285 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4286 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4287 (CFILES): Added mips-dis.c.
4289 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4291 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4292 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4294 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4296 * Makefile.in: Improve *clean rules.
4297 * configure.in: Allow a default host.
4299 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4301 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4302 files include other sysdep files
4304 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4306 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4308 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4310 * configure.in: For host support, use ../bfd/configure.host
4311 so it stays in sync with the ../bfd/hosts database.
4313 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4315 * configure.in: use cpu-vendor-os triple instead of nested cases
4317 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4319 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4320 *always* the wrong one.
4322 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4324 * z8kgen.c: added copyright info
4326 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4328 * z8k-dis.c (unparse_instr): prettier tabs
4329 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4331 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4333 * configure.in: Add ncr* configuration.
4334 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4335 picayune ANSI compilers happy.
4337 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4339 * configure.in (i386): Make i386 and i486 synonymous for now.
4340 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4342 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4344 * Makefile.in (install): Fix typo.
4346 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4348 * Makefile.in (make): Remove obsolete crud.
4349 (sparc-opc.o): Avoid Sun Make VPATH bug.
4351 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4353 * Makefile.in: since there are no SUBDIRS, remove rule and
4354 references of subdir_do.
4356 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4358 * Makefile.in (install): Get the library name right here too.
4359 Don't install bfd.h, since it's unrelated to this library. No
4360 subdirs to recurse into, either.
4361 (CFILES): The source file has a .c suffix, not .o.
4363 * sparc-opc.c: New file, moved from BFD.
4364 * Makefile.in (OFILES): Build it.
4366 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4368 * z8k-dis.c: fixed forward refferences of some declarations.
4370 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4372 * Makefile.in: get the name of the library right
4374 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4376 * z8k-dis.c: knows how to disassemble z8k stuff
4377 * z8k-opc.h: new file full of z8000 opcodes
4381 version-control: never