1 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
3 * i386-dis.c (get_valid_dis386): Set vex.w to 0 for VEX C5
5 (print_insn): Don't set vex.w here.
7 2009-12-11 H.J. Lu <hongjiu.lu@intel.com>
9 * i386-dis.c (print_insn): Set vex.w to 0.
11 2009-12-11 Quentin Neill <quentin.neill@amd.com>
13 * i386-dis.c (get_vex_imm8): Extend logic to apply in all cases,
14 to avoid fetching ahead for the immediate bytes when OP_E_memory
15 has already been called. Fix indentation.
17 2009-12-11 Nick Clifton <nickc@redhat.com>
19 * Makefile.in: Regenerate.
20 * configure: Regenerate.
21 * arm-dis.c: Fix shadowed variable warnings.
22 * cgen-opc.c: Likewise.
23 * cr16-dis.c: Likewise.
24 * crx-dis.c: Likewise.
25 * d30v-dis.c: Likewise.
26 * fr30-dis.c: Likewise.
27 * frv-opc.c: Likewise.
28 * h8500-dis.c: Likewise.
29 * i386-dis.c: Likewise.
30 * i960-dis.c: Likewise.
31 * ia64-gen.c: Likewise.
32 * ia64-opc.c: Likewise.
33 * m32c-asm.c: Likewise.
34 * m32c-dis.c: Likewise.
35 * m68k-dis.c: Likewise.
36 * maxq-dis.c: Likewise.
37 * mcore-dis.c: Likewise.
38 * mep-asm.c: Likewise.
39 * microblaze-dis.c: Likewise.
40 * mmix-dis.c: Likewise.
41 * ns32k-dis.c: Likewise.
42 * or32-opc.c: Likewise.
43 * s390-dis.c: Likewise.
44 * sh64-dis.c: Likewise.
45 * spu-dis.c: Likewise.
46 * tic30-dis.c: Likewise.
48 2009-12-09 Nick Clifton <nickc@redhat.com>
51 * arm-dis.c (print_insn_arm): Mark insns that use the PC in
52 post-indexed addressing as unpredictable.
54 2009-12-03 H.J. Lu <hongjiu.lu@intel.com>
56 * i386-dis.c (FXSAVE_Fixup): New.
58 (mod_table): Use FXSAVE on fxsave and fxrstor.
60 * i386-opc.tbl: Add fxsave64 and fxrstor64.
61 * i386-tbl.h: Regenerated.
63 2009-12-02 Nick Clifton <nickc@redhat.com>
64 Richard Earnshaw <rearnsha@arm.com>
67 * arm-dis.c (thumb32_opc): Adjust disassembly of QADD, QDADD, QSUB
70 2009-11-30 Massimo Ruo Roch <massimo.ruoroch@polito.it>
73 * m68k-opc.c (m68k_opcodes): Allow the STLDSR instruction on the
76 2009-11-17 Quentin Neill <quentin.neill@amd.com>
77 Sebastian Pop <sebastian.pop@amd.com>
79 * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
80 decoding the second source operand from the immediate byte.
81 (OP_EX_VexW): Pass an extra integer to identify the second
82 and third source arguments.
84 2009-11-19 H.J. Lu <hongjiu.lu@intel.com>
86 * i386-opc.tbl: Add IsLockable to cmpxch16b.
87 * i386-tbl.h: Regenerated.
89 2009-11-19 Nick Clifton <nickc@redhat.com>
92 * arm-dis.c (print_insn_arm): Do not print an offset of zero when
93 decoding Immediaate Offset addressing.
95 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
98 * i386-dis.c (get_vex_imm8): Do not increment codep.
99 Avoid incrementing bytes_before_imm when OP_E_memory
100 has already forwarded the codep pointer.
101 (OP_EX_VexW): Increment codep to skip mod/rm byte.
103 2009-11-18 Sebastian Pop <sebastian.pop@amd.com>
105 * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
106 (VEX_LEN_XOP_08_A1): Removed.
107 (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
109 (vex_len_table): Same.
110 * i386-gen.c (CPU_CVT16_FLAGS): Removed.
111 (cpu_flags): Remove field for CpuCVT16.
112 * i386-opc.h (CpuCVT16): Removed.
113 (i386_cpu_flags): Remove bitfield cpucvt16.
114 (i386-opc.tbl): Remove CVT16 instructions.
115 * i386-init.h: Regenerated.
116 * i386-tbl.h: Regenerated.
118 2009-11-17 Sebastian Pop <sebastian.pop@amd.com>
119 Quentin Neill <quentin.neill@amd.com>
121 * i386-dis.c (OP_Vex_2src_1): New.
122 (OP_Vex_2src_2): New.
126 (VEX_LEN_XOP_08_A0): Added.
127 (VEX_LEN_XOP_08_A1): Added.
128 (VEX_LEN_XOP_09_80): Added.
129 (VEX_LEN_XOP_09_81): Added.
130 (xop_table): Added an entry for XOP_08. Handle xop instructions.
131 (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
132 VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
133 (get_valid_dis386): Handle XOP_08.
135 * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
136 (cpu_flags): Add CpuXOP and CpuCVT16.
137 (opcode_modifiers): Add XOP08, Vex2Sources.
138 * i386-opc.h (CpuXOP): Added.
140 (i386_cpu_flags): Add cpuxop and cpucvt16.
142 (Vex2Sources): Added.
143 (i386_opcode_modifier): Add xop08, vex2sources.
144 * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
145 * i386-init.h: Regenerated.
146 * i386-tbl.h: Regenerated.
148 2009-11-17 Nick Clifton <nickc@redhat.com>
151 * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
152 instruction variants. Add pattern for MRS variant that was being
154 (arm_decode_shift): Place error message in a comment.
155 (print_insn_arm): Note that writing back to the PC is
157 Only print 'p' variants of cmp/cmn/teq/tst instructions if
158 decoding for pre-V6 architectures.
160 2009-11-17 Edward Nevill <edward.nevill@arm.com>
162 * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
164 2009-11-14 Doug Evans <dje@sebabeach.org>
166 * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
168 * Makefile.in: Regenerate.
170 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
172 * i386-dis.c (OP_E_extended): Removed.
174 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
176 * i386-dis.c (print_insn): Check rex_ignored.
178 2009-11-13 H.J. Lu <hongjiu.lu@intel.com>
180 * i386-dis.c (ckprefix): Updated to return 0 if number of
181 prefixes > 14 and record the last position for each prefix.
182 (lock_prefix): Removed.
183 (data_prefix): Likewise.
184 (addr_prefix): Likewise.
185 (repz_prefix): Likewise.
186 (repnz_prefix): Likewise.
187 (last_lock_prefix): New.
188 (last_repz_prefix): Likewise.
189 (last_repnz_prefix): Likewise.
190 (last_data_prefix): Likewise.
191 (last_addr_prefix): Likewise.
192 (last_rex_prefix): Likewise.
193 (last_seg_prefix): Likewise.
194 (MAX_CODE_LENGTH): Likewise.
195 (ADDR16_PREFIX): Likewise.
196 (ADDR32_PREFIX): Likewise.
197 (DATA16_PREFIX): Likewise.
198 (DATA32_PREFIX): Likewise.
199 (REP_PREFIX): Likewise.
200 (seg_prefix): Likewise.
201 (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
202 (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
203 DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
204 (get_valid_dis386): Updated.
206 (OP_Monitor): Likewise.
207 (REP_Fixup): Likewise.
208 (print_insn): Display all prefixes.
209 (putop): Set PREFIX_DATA on used_prefixes only if it is used.
210 (intel_operand_size): Likewise.
211 (OP_E_register): Likewise.
214 (OP_IMREG): Likewise.
218 (CRC32_Fixup): Likewise.
219 (MOVBE_Fixup): Likewise.
220 (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
222 (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
223 used_prefixes only if it is used.
225 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
227 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
228 or, sbb, sub, xor and xchg with register only operands.
229 * i386-tbl.h: Regenerated.
231 2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
233 * i386-gen.c (opcode_modifiers): Add IsLockable.
235 * i386-opc.h (IsLockable): New.
236 (i386_opcode_modifier): Add islockable.
238 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
239 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
241 * i386-tbl.h: Regenerated.
243 2009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
245 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
246 generic coprocessor instructions for FPA loads and stores.
247 (print_insn_coprocessor): Remove %C support. Display address for
248 PC-relative offsets in %A.
250 2009-11-11 H.J. Lu <hongjiu.lu@intel.com>
252 * i386-dis.c (all_prefixes): New.
253 (ckprefix): Set all_prefixes.
254 (print_insn): Print all_prefixes instead of lock_prefix,
255 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
257 2009-11-11 Nick Clifton <nickc@redhat.com>
260 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
261 (print_insn_arm): Extend %s format control code to check for
262 unpredictable addressing modes. Add support for %S format control
263 code which suppresses this check.
264 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
265 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
266 PRE_BIT_SET): New macros.
267 (print_insn_coprocessor): Use the new macros instead of magic
269 (print_arm_address): Likewise.
270 (pirnt_insn_arm): Likewise.
271 (print_insn_thumb32): Likewise.
273 2009-11-11 Nick Clifton <nickc@redhat.com>
275 * po/id.po: Updated Indonesian translation.
277 2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
279 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
281 2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
283 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
284 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
285 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
287 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
290 2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
291 Quentin Neill <quentin.neill@amd.com>
293 * opcodes/i386-dis.c (OP_LWPCB_E): New.
296 (USE_XOP_8F_TABLE): New.
298 (REG_XOP_LWPCB): New.
302 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
303 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
305 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
306 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
307 to access to the vex_table.
311 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
312 (cpu_flags): Add CpuLWP.
313 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
314 * opcodes/i386-opc.h (CpuLWP): New.
315 (i386_cpu_flags): Add bit cpulwp.
319 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
320 * opcodes/i386-opc.tbl (llwpcb): Added.
324 2009-11-04 DJ Delorie <dj@redhat.com>
326 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
327 (mvtcp, mvfcp, opecp): Remove.
328 * rx-decode.c: Regenerate.
329 * rx-dis.c (cpen): Remove.
331 2009-11-03 Doug Evans <dje@sebabeach.org>
333 * m32c-desc.c: Regenerate.
334 * mep-desc.c: Regenerate.
336 2009-11-02 Paul Brook <paul@codesourcery.com>
338 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
339 Add VFPv4 instructions.
341 2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
343 * i386-dis.c (OP_VEX_FMA): Removed.
345 (Vex128FMA): Removed.
346 (prefix_table): First source operand of FMA4 insns is decoded
347 with Vex not with VexFMA.
348 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
349 when vex.w is set. Third source operand is decoded with
351 2009-10-27 Alan Modra <amodra@bigpond.net.au>
353 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
354 * Makefile.in: Regenerate.
355 * po/POTFILES.in: Regenerate.
357 2009-10-23 Doug Evans <dje@sebabeach.org>
359 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
360 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
361 * cgen-bitset.c: Update.
362 * fr30-desc.h: Regenerate.
363 * frv-desc.h: Regenerate.
364 * ip2k-desc.h: Regenerate.
365 * iq2000-desc.h: Regenerate.
366 * lm32-desc.h: Regenerate.
367 * m32c-desc.h: Regenerate.
368 * m32c-opc.h: Regenerate.
369 * m32r-desc.h: Regenerate.
370 * mep-desc.h: Regenerate.
371 * mt-desc.h: Regenerate.
372 * openrisc-desc.h: Regenerate.
373 * xc16x-desc.h: Regenerate.
374 * xstormy16-desc.h: Regenerate.
376 2009-10-22 DJ Delorie <dj@redhat.com>
378 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
379 * rx-decode.c: Regenerated.
381 2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
384 * i386-dis.c: Document LB, LS and LV macros.
385 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
386 with the 64-bit displacement or immediate operand.
387 (putop): Handle LB, LS and LV macros.
389 2009-10-18 Doug Evans <dje@sebabeach.org>
391 * lm32-opinst.c: Regenerate.
392 * m32c-desc.c: Regenerate.
393 * m32r-opinst.c: Regenerate.
394 * openrisc-ibld.c: Regenerate.
395 * xc16x-desc.c: Regenerate.
396 * xc16x-desc.h: Regenerate.
398 2009-10-17 Doug Evans <dje@sebabeach.org>
400 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
401 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
402 sorted alphabetically.
403 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
404 stamp-* rules are sorted alphabetically.
405 * Makefile.in: Regenerate.
407 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
409 * i386-opc.h: Use enum instead of nested macros.
411 2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
413 * i386-dis.c: Simplify enums.
415 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
416 Ineiev <ineiev@gmail.com>
419 * i386-dis.c: Use enum instead of nested macros.
421 2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
423 * i386-dis.c (MAX_BYTEMODE): Removed.
425 2009-10-14 Tomas Hurka <tom@hukatronic.cz>
428 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
430 2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
432 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
435 2009-10-07 Michael Eager <eager@eagercon.com>
437 * microblaze-dis.c: Add include for microblaze-dis.h,
438 eliminate local extern decls.
439 * microblaze-dis.h: New.
441 2009-10-06 Nick Clifton <nickc@redhat.com>
443 * po/fi.po: Updated Finnish translation.
445 2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
447 * opc2c.c: Include "libiberty.h" and <errno.h>.
448 (orig_filename): Constify.
449 (dump_lines): Fix line number directive.
450 (main): Set orig_filename to basename of input file. Use
453 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
454 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
455 instead of $(EXEEXT).
456 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
457 $(LINK_FOR_BUILD). Link with libiberty.
458 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
459 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
460 * Makefile.in: Regenerated.
461 * rx-decode.c: Regenerated.
463 2009-10-03 Paul Reed <paulreed@paddedcell.com>
465 * arm-dis.c (print_insn): Check symtab_size not *symtab.
467 2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
469 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
470 * i386-tbl.h: Regenerated.
472 2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
474 * ppc-dis.c (ppc_opts): Add "476" entry.
475 * ppc-opc.c (PPC476): Define.
476 (powerpc_opcodes): Update mnemonics where required for 476.
478 2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
480 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
481 * ppc-dis.c (ppc_opts): Likewise.
482 Rename "ppca2" to "a2".
484 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
486 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
488 2009-09-29 DJ Delorie <dj@redhat.com>
490 * Makefile.am: Add RX files.
491 * configure.in: Add support for RX target.
492 * disassemble.c: Likewise.
493 * Makefile.in: Regenerate.
494 * configure: Regenerate.
496 * rx-decode.c: New file.
497 * rx-decode.opc: New file.
498 * rx-dis.c: New file.
500 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
502 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
503 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
505 2009-09-25 Michael Eager <eager@eagercon.com>
507 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
508 microblaze_decode_insn): Add declarations.
509 (get_delay_slots_microblaze): Remove.
511 2009-09-25 Martin Thuresson <martint@google.com>
513 Update sources to make arc and arm targets compile cleanly with
515 * arc-dis.c Fix casts.
516 * arc-ext.c: Add casts.
517 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
520 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
522 * i386-gen.c (opcode_modifiers): Remove Vex256.
523 (set_bitfield): Handle XXX=V.
525 * i386-opc.h (Vex): Update comments.
528 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
530 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
531 * i386-tbl.h: Regenerated.
533 2009-09-23 Nick Clifton <nickc@redhat.com>
535 * po/fr.po: Updated French translation.
537 2009-09-21 Ben Elliston <bje@au.ibm.com>
538 Peter Bergner <bergner@vnet.ibm.com>
540 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
541 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
542 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
543 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
545 (ERAT_T): New operand.
546 (XWC_MASK): New mask.
550 2009-09-18 Nick Clifton <nickc@redhat.com>
552 * po/es.po: Updated Spanish translation.
553 * po/vi.po: Updated Vietnamese translation.
555 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
557 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
560 2009-09-14 Nick Clifton <nickc@redhat.com>
562 * po/nl.po: Updated Dutch translation.
564 2009-09-11 Nick Clifton <nickc@redhat.com>
566 * po/opcodes.pot: Updated by the Translation project.
568 2009-09-11 Martin Thuresson <martint@google.com>
570 Updated sources to compile cleanly with -Wc++-compat:
571 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
572 * ldcref.c: Add casts.
573 * ldctor.c: Add casts.
575 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
576 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
577 * ldlang.h (enum statement_enum): Move to top level.
578 * ldmain.c: Add casts.
579 * ldwrite.c: Add casts.
580 * lexsup.c: Add casts. (enum control_enum): Move to top level.
581 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
583 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
585 * s390-dis.c (print_insn_s390): Avoid 'long long'.
587 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
589 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
590 (print_insn_s390): Signextend and shift pcrel operands before printing.
592 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
594 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
595 VEX_LEN_AE_R_X_M_0 in comments.
597 2009-09-08 DJ Delorie <dj@redhat.com>
599 * mep-opc.c: Regenerate.
601 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
603 * z8kgen.c (struct op): Replace unused flavor with id.
604 (opt): Remove extra xorb entry.
605 (func): Use id field as fallback.
606 (sub): Return new string, caller changed.
607 (internal): Allocate end marker. Assign unique id before sorting.
608 (gas): Likewise. Fix loop end condition.
609 * z8k-opc.h: Regenerate.
611 2009-09-08 Alan Modra <amodra@bigpond.net.au>
613 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
615 2009-09-07 Alan Modra <amodra@bigpond.net.au>
617 * z8kgen.c (func): Fix thinko last patch.
619 2009-09-07 Alan Modra <amodra@bigpond.net.au>
621 * z8kgen.c (func): Stabilize qsort of identically named entries.
622 * z8k-opc.h: Regenerate.
624 2009-09-07 Tristan Gingold <gingold@adacore.com>
626 * po/opcodes.pot: Regenerate.
628 2009-09-07 Alan Modra <amodra@bigpond.net.au>
630 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
631 * configure: Regenerate.
632 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
633 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
634 (i386-gen, ia64-gen, z8kgen): ..here.
635 * Makefile.in: Regenerate.
637 2009-09-07 Tristan Gingold <gingold@adacore.com>
639 * z8k-opc.h: Regenerate.
641 2009-09-05 Martin Thuresson <martin@mtme.org>
643 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
644 * m88k-dis.c (m88kdis): Rename variable class to in_class.
645 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
646 Rename argument class to symbol_class.
648 2009-09-04 Jie Zhang <jie.zhang@analog.com>
650 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
651 to the new encoding of DBGA, DBGAH, and DBGAL.
652 (_print_insn_bfin): Likewise.
654 2009-09-03 Jie Zhang <jie.zhang@analog.com>
656 * bfin-dis.c (_print_insn_bfin): Don't declare.
657 (print_insn_bfin): Don't declare.
658 (dregs_pair): Remove.
659 (ignore_bits): Remove.
662 2009-09-03 Jie Zhang <jie.zhang@analog.com>
664 * bfin-dis.c (IS_DREG): Define.
670 (decode_REGMV_0): Check illegal register move instructions.
672 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
674 * Makefile.am (BUILD_LIBINTL): New variable.
675 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
676 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
677 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
678 * Makefile.in: Regenerate.
680 2009-09-01 DJ Delorie <dj@redhat.com>
682 * mep-asm.c: Regenerate.
683 * mep-desc.c: Regenerate.
684 * mep-opc.c: Regenerate.
686 2009-09-01 Tristan Gingold <gingold@adacore.com>
688 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
689 dependencies. Remove unused FORMAT variable.
690 * configure.com: New file to create build.com DCL script for
691 Itanium VMS or Alpha VMS.
693 2009-08-29 Martin Thuresson <martin@mtme.org>
695 * cris-dis.c (bytes_to_skip): Update code to use new name.
696 * i386-dis.c (putop): Update code to use new name.
697 * i386-gen.c (process_i386_opcodes): Update code to use
699 * i386-opc.h (struct template): Rename struct template to
700 insn_template. Update code accordingly.
701 * i386-tbl.h (i386_optab): Update type to use new name.
702 * ia64-dis.c (print_insn_ia64): Rename variable template
704 * tic30-dis.c (struct instruction, get_tic30_instruction):
705 Update code to use new name.
706 * tic54x-dis.c (has_lkaddr, get_insn_size)
707 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
708 Update code to use new name.
709 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
710 Update type to new name.
711 * z8kgen.c (internal, gas): Rename variable new to new_op.
713 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
715 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
716 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
717 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
718 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
719 * Makefile.in: Regenerated.
721 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
723 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
724 [INSTALL_LIBBFD]: ... here, ...
725 [INSTALL_LIBBFD]: ... and empty overrides here.
726 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
727 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
728 * Makefile.in: Regenerate.
729 * configure: Regenerate.
731 2009-08-26 Philippe De Muyter <phdm@macqel.be>
733 * m68k-dis.c (print_insn_arg): Add movecr register names for
734 coldfire v4e families.
736 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
738 * Makefile.am (SUBDIRS): Build '.' before 'po'.
739 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
740 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
741 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
742 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
743 (i386-gen.o): New rule.
744 ($(srcdir)/i386-init.h): Adjust.
745 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
746 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
747 (ia64-gen.o): New rule.
748 (ia64_asmtab_deps): New variable.
749 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
750 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
751 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
753 (s390-opc.tab): Adjust.
754 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
756 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
757 * Makefile.in: Regenerate.
758 * z8kgen.c (gas): Avoid '/*' in comment.
759 * z8k-opc.h (func): Regenerate.
761 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
763 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
764 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
765 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
766 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
768 (LIBOPCODES_CFILES): New variable, adding to
769 TARGET_LIBOPCODES_CFILES also non-target library sources.
770 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
772 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
773 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
774 * Makefile.in: Regenerate.
775 * po/POTFILES.in: Regenerate.
777 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
779 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
780 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
781 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
782 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
783 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
784 is built shared even if it is not to be installed.
785 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
786 (install_libopcodes, uninstall_libopcodes): Remove.
787 (AM_CPPFLAGS): Renamed from ...
788 (INCLUDES): ... this.
789 * Makefile.in: Regenerate.
791 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
792 1.11, foreign, no-dist.
793 (MKDEP, m32c_opc_h): Remove variables.
794 (disassemble.lo): Rewrite using automake-style dependency
795 tracking rules; only list the dependency upon the primary source
796 file, but no included headers.
797 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
798 (i386-gen.o, ia64-gen.o): Remove dependency statements.
799 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
800 ensure all dependency fragments are included in the Makefile.
801 (s390-opc.lo): Depend on s390-opc.tab.
802 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
803 (mkdep section): Remove.
804 * Makefile.in: Regenerate.
805 * po/POTFILES.in: Regenerate.
807 * Makefile.am (install-pdf, install-html): Remove.
808 * Makefile.in: Regenerate.
810 * Makefile.in: Regenerate.
811 * aclocal.m4: Likewise.
812 * config.in: Likewise.
813 * configure: Likewise.
815 2009-08-06 Michael Eager <eager@eagercon.com>
817 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
818 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
819 * Makefile.in: Regenerate.
820 * configure.in: Add bfd_microblaze_arch target.
821 * configure: Regenerate.
822 * disassemble.c: Define ARCH_microblaze, return
823 print_insn_microblaze().
824 * microblaze-dis.c: New MicroBlaze disassembler.
825 * microblaze-opc.h: New MicroBlaze opcode definitions.
826 * microblaze-opcm.h: New MicroBlaze opcode types.
828 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
830 * configure.in: Handle bfd_l1om_arch.
831 * disassemble.c (disassembler): Likewise.
833 * configure: Regenerated.
835 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
836 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
838 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
840 (cpu_flags): Add CpuL1OM.
841 (set_bitfield): Take an argument to set the value field.
842 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
843 (process_i386_opcode_modifier): Updated.
844 (process_i386_operand_type): Likewise.
845 * i386-init.h: Regenerated.
846 * i386-tbl.h: Likewise.
848 * i386-opc.h (CpuL1OM): New.
850 (i386_cpu_flags): Add cpul1om.
852 2009-07-24 Jan Beulich <jbeulich@novell.com>
854 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
856 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
857 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
858 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
859 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
861 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
863 * i386-opc.tbl: Qualify floating point instructions by their
864 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
865 and fsincos to be avilable only on 387. Fix fstsw ax to be
866 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
868 * i386-init.h, i386-tbl.h: Regenerate.
870 2009-07-20 Nick Clifton <nickc@redhat.com>
873 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
874 offset or indexed based addressing mode 3.
876 2009-07-14 Nick Clifton <nickc@redhat.com>
879 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
881 (arm_decode_shift): Catch illegal register based shifts.
882 (print_insn_arm): Properly handle negative register r0
883 post-indexed addressing.
885 2009-07-10 Doug Kwan <dougkwan@google.com>
887 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
888 lower 32 bits of long types to make hexadecimal output consistent
889 on both 32-bit and 64-bit hosts.
891 2009-07-10 Alan Modra <amodra@bigpond.net.au>
893 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
894 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
895 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
896 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
897 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
898 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
899 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
900 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
901 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
902 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
903 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
904 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
906 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
908 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
910 2009-07-07 Nick Clifton <nickc@redhat.com>
913 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
916 2009-07-06 DJ Delorie <dj@redhat.com>
918 * mep-desc.c: Regenerate.
919 * mep-desc.h: Regenerate.
920 * mep-opc.c: Regenerate.
921 * mep-opc.h: Regenerate.
923 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
925 * i386-opc.h (CpuFMA4): Add CpuFMA4.
926 (i386_cpu_flags): New.
927 * i386-gen.c: Add CPU_FMA4_FLAGS.
928 * i386-opc.tbl: Add FMA4 instructions.
929 * i386-tbl.h: Regenerate.
930 * i386-init.h: Regenerate.
931 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
932 (OP_XMM_VexW): Ditto.
934 (VEXI4_Fixup): Ditto.
935 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
936 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
937 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
938 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
939 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
940 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
941 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
942 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
943 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
944 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
945 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
946 (get_vex_imm8): New. handle FMA4.
947 (OP_EX_VexReg): Ditto.
949 2009-06-30 Nick Clifton <nickc@redhat.com>
952 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
953 LFM and SFM instructions as comments,.
954 Improve consistency of formatting for instructions displayed as
955 comments and decimal values displayed with their hexadecimal
959 2009-06-29 Nick Clifton <nickc@redhat.com>
962 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
963 boundary between variaant and generic coprocessor instuctions.
964 (coprocessor): Use it.
965 Fix architecture version of MCRR and MRRC instructions.
966 (arm_opcdes): Fix patterns for STRB and STRH instructions.
967 (print_insn_coprocessor): Check architecture and extension masks.
968 Print a hexadecimal version of any decimal constant that is
969 outside of the range of -16 to +32.
970 (print_arm_address): Add a return value of the offset used in the
971 adress, if it is worth printing a hexadecimal version of it.
972 (print_insn_neon): Print a hexadecimal version of any decimal
973 constant that is outside of the range of -16 to +32.
974 (print_insn_arm): Likewise.
975 (print_insn_thumb16): Likewise.
976 (print_insn_thumb32): Likewise.
979 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
980 of an undefined instruction.
981 (arm_opcodes): Use it.
982 (thumb_opcod): Use it.
983 (thumb32_opc): Use it.
985 2009-06-23 DJ Delorie <dj@redhat.com>
987 * mep-desc.c: Regenerate.
988 * mep-desc.h: Regenerate.
989 * mep-dis.c: Regenerate.
990 * mep-ibld.c: Regenerate.
991 * mep-opc.c: Regenerate.
993 * mep-asm.c: Regenerate.
994 * mep-opc.c: Regenerate.
995 * mep-opc.h: Regenerate.
997 2009-06-22 Nick Clifton <nickc@redhat.com>
999 * po/fi.po: Updated Finish translation.
1001 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1003 * m32c-asm.c: Regenerate.
1005 2009-06-22 Alan Modra <amodra@bigpond.net.au>
1007 * score-dis.c (print_insn_score48, print_insn_score32): Move default
1008 case label to proper lexical block.
1009 * score7-dis.c (print_insn_score32): Likewise.
1011 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
1013 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
1014 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
1015 * s390-opc.txt (nopr, nop): Use new instruction format.
1017 2009-06-18 Nick Clifton <nickc@redhat.com>
1020 * arm-dis.c (print_insn_coprocessor): Check that a user specified
1021 ARM architecture supports the matched instruction.
1022 (print_insn_arm): Likewise.
1023 (select_arm_features): New function. Fills in the fields of an
1024 arm_feature_set structure based on a given arm machine number.
1025 (print_insn): Initialise an arm_feature_set structure.
1027 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
1029 * vax-dis.c (is_function_entry): Return success for synthetic
1031 (is_plt_tail): New function.
1032 (print_insn_vax): Decode PLT entry offset longword.
1034 2009-06-15 Nick Clifton <nickc@redhat.com>
1037 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
1041 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
1043 2009-06-15 Nick Clifton <nickc@redhat.com>
1046 * arm-dis.c (print_insn): Ignore is_data if the user has requested
1047 the disassembly of data as well as instructions.
1049 2009-06-11 Doug Evans <dje@sebabeach.org>
1051 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
1053 2009-06-11 Anthony Green <green@moxielogic.com>
1055 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
1056 (moxie_form3_opc_info): Add branch instructions.
1057 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
1058 encoded instructions.
1060 2009-06-06 Anthony Green <green@moxielogic.com>
1062 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
1063 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
1065 2009-06-04 Alan Modra <amodra@bigpond.net.au>
1067 * dep-in.sed: Don't use \n in replacement part of s command.
1068 * Makefile.am (DEP1): LC_ALL for uniq.
1069 * Makefile.in: Regenerate.
1071 2009-06-02 Nick Clifton <nickc@redhat.com>
1073 * po/nl.po: Updated Dutch translation.
1075 2009-06-02 Tristan Gingold <gingold@adacore.com>
1077 * ia64-gen.c (parse_resource_users, print_dependency_table,
1078 add_dis_table_ent, finish_distable, insert_bit_table_ent,
1079 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1080 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1081 insert_completer_entry, print_completer_entry, print_completer_table,
1082 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1084 2009-05-28 DJ Delorie <dj@redhat.com>
1086 * mep-asm.c: Regenerate.
1087 * mep-desc.c: Regenerate.
1089 2009-05-26 DJ Delorie <dj@redhat.com>
1091 * mep-asm.c: Regenerate.
1092 * mep-desc.c: Regenerate.
1093 * mep-desc.h: Regenerate.
1094 * mep-dis.c: Regenerate.
1095 * mep-ibld.c: Regenerate.
1096 * mep-opc.c: Regenerate.
1097 * mep-opc.h: Regenerate.
1099 2009-05-26 Nick Clifton <nickc@redhat.com>
1101 * po/id.po: Updated Indonesian translation.
1102 * po/opcodes.pot: Updated template file.
1104 2009-05-26 Alan Modra <amodra@bigpond.net.au>
1106 * dep-in.sed: Don't modify .o to .lo here. Output one filename
1107 per line with all lines having continuation backslash. Prefix
1108 first line with "A", following lines with "B".
1109 * Makefile.am (DEP): Don't use dep.sed here.
1110 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
1111 dep.sed here on dependencies, sort and uniq.
1112 * Makefile.in: Regenerate.
1114 2009-05-25 Tristan Gingold <gingold@adacore.com>
1116 * makefile.vms (OPT): New variable.
1117 (CFLAGS): Update compilation flags.
1119 2009-05-22 DJ Delorie <dj@redhat.com>
1121 * mep-asm.c: Regenerate.
1122 * mep-desc.c: Regenerate.
1123 * mep-desc.h: Regenerate.
1124 * mep-dis.c: Regenerate.
1125 * mep-ibld.c: Regenerate.
1126 * mep-opc.c: Regenerate.
1127 * mep-opc.h: Regenerate.
1129 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
1131 * i386-opc.h (Cpusse5): Delete.
1132 (i386_cpu_flags): Delete.
1133 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1134 * i386-opc.tbl: Remove SSE5 instructions.
1135 * i386-tbl.h: Regenerate.
1136 * i386-init.h: Regenerate.
1137 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1138 (print_drex_arg): Delete.
1141 (OP_DREX_ICMP): Delete.
1142 (OP_DREX_FCMP): Delete.
1144 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1146 2009-05-22 Alan Modra <amodra@bigpond.net.au>
1148 * Makefile.am: Run "make dep-am".
1149 * Makefile.in: Regenerate.
1150 * po/POTFILES.in: Regenerate.
1152 2009-05-19 DJ Delorie <dj@redhat.com>
1154 * mep-asm.c: Regenerate.
1155 * mep-opc.c: Regenerate.
1157 2009-04-30 DJ Delorie <dj@redhat.com>
1159 * mep-asm.c: Regenerate.
1160 * mep-desc.c: Regenerate.
1161 * mep-desc.h: Regenerate.
1162 * mep-dis.c: Regenerate.
1163 * mep-ibld.c: Regenerate.
1164 * mep-opc.c: Regenerate.
1165 * mep-opc.h: Regenerate.
1167 2009-04-17 DJ Delorie <dj@redhat.com
1169 * mep-desc.c: Regenerate.
1170 * mep-ibld.c: Regenerate.
1171 * mep-opc.c: Regenerate.
1172 * mep-opc.h: Regenerate.
1174 2009-04-15 Anthony Green <green@moxielogic.com>
1176 * moxie-opc.c, moxie-dis.c: Created.
1177 * Makefile.am: Build the moxie source files.
1178 * configure.in: Add moxie support.
1179 * Makefile.in, configure: Rebuilt.
1180 * disassemble.c (disassembler): Add moxie support.
1181 (ARCH_moxie): Define.
1183 2009-04-15 Jan Beulich <jbeulich@novell.com>
1185 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1187 (pshab, pshaw, pshad, pshaq): Likewise.
1188 * i386-tbl.h: Re-generate.
1190 2009-04-08 DJ Delorie <dj@redhat.com
1192 * mep-asm.c: Regenerate.
1193 * mep-desc.c: Regenerate.
1194 * mep-desc.h: Regenerate.
1195 * mep-dis.c: Regenerate.
1196 * mep-ibld.c: Regenerate.
1197 * mep-opc.c: Regenerate.
1198 * mep-opc.h: Regenerate.
1200 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
1202 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1203 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1204 Reorder entries so the extended mnemonics are listed before tlbilx.
1206 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
1208 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1210 (print_insn_powerpc): Make sure we only deprecate instructions using
1211 the original dialect and not a modified dialect due to -Many handling.
1212 Move the handling of the condition register and default operands to
1213 the end of the if/else if/else chain.
1214 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1215 instructions from newer processors are listed before older ones.
1216 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1217 that have instructions with conflicting opcodes.
1219 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
1221 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1224 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
1226 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1228 2009-03-30 Joseph Myers <joseph@codesourcery.com>
1230 * arm-dis.c (print_insn): Also check section matches in backwards
1231 search for mapping symbol.
1233 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1235 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1237 2009-03-18 Alan Modra <amodra@bigpond.net.au>
1239 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1240 * Makefile.am: Run "make dep-am".
1241 * Makefile.in: Regenerate.
1242 * openrisc-opc.c: Regenerate.
1244 2009-03-10 Nick Clifton <nickc@redhat.com>
1246 * po/id.po: Updated Indonesian translation.
1248 2009-03-10 Alan Modra <amodra@bigpond.net.au>
1250 * ppc-dis.c: Include "opintl.h".
1251 (struct ppc_mopt, ppc_opts): New.
1252 (ppc_parse_cpu): New function.
1253 (powerpc_init_dialect): Use it.
1254 (print_ppc_disassembler_options): Dump options from ppc_opts.
1255 Internationalize message.
1257 2009-03-06 Nick Clifton <nickc@redhat.com>
1259 * po/es.po: Updated Spanish translation.
1261 2009-03-04 Alan Modra <amodra@bigpond.net.au>
1264 * configure.in: Test for ld --as-needed support. Link shared
1265 libopcodes against libm.
1266 * configure: Regenerate.
1268 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1270 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1271 instructions from newer processors are listed before older ones.
1273 2009-03-03 Alan Modra <amodra@bigpond.net.au>
1275 * Makefile.am: Run "make dep-am".
1276 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1278 * Makefile.in: Regenerate.
1280 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1282 * score7-dis.c: New file.
1283 * Makefile.am: Add dependencies for score7-dis.c.
1284 * Makefile.in: Regenerate.
1285 * configure.in: Add score7-dis to score files.
1286 * configure: Regenerate.
1287 * score-dis.c: Add support for score7 architecture.
1288 * score-opc.h: Likewise.
1290 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1292 * configure: Regenerate.
1294 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1296 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1298 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1300 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1301 the power7 and the isel instructions.
1302 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1303 (insert_dm, extract_dm): Likewise.
1304 (XB6): Update comment to include XX2 form.
1305 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1306 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1307 (RemoveXX3DM): Delete.
1308 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1309 "mftgpr">: Deprecate for POWER7.
1310 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1311 "frsqrte.">: Deprecate the three operand form and enable the two
1312 operand form for POWER7 and later.
1313 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1314 <"waitsrv", "waitimpl">: Add extended opcodes.
1315 <"ldbrx", "stdbrx">: Enable for POWER7.
1316 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1317 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1318 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1319 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1320 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1321 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1322 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1323 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1324 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1325 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1326 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1327 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1328 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1329 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1330 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1331 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1332 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1333 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1334 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1335 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1336 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1337 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1338 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1339 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1340 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1341 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1342 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1343 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1344 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1345 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1346 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1347 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1348 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1349 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1350 "xxspltw", "xxswapd">: Add VSX opcodes.
1352 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1354 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1355 (operand_types): Remove Vex_Imm4.
1357 * i386-opc.h (Vex_Imm4): Removed.
1359 (i386_operand_type): Remove vex_imm4.
1361 * i386-opc.tbl: Remove Vex_Imm4 comments.
1362 * i386-init.h: Regenerated.
1363 * i386-tbl.h: Likewise.
1365 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
1367 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1368 vq{r}shr{u}n.s64 insnstructions.
1370 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1372 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1373 operand to be a float point register (FRT/FRS).
1375 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1377 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1378 dmfc2 and dmtc2 before the architecture-level variants.
1380 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1382 * fr30-opc.c: Regenerate.
1383 * frv-opc.c: Regenerate.
1384 * ip2k-opc.c: Regenerate.
1385 * iq2000-opc.c: Regenerate.
1386 * lm32-opc.c: Regenerate.
1387 * m32c-opc.c: Regenerate.
1388 * m32r-opc.c: Regenerate.
1389 * mep-opc.c: Regenerate.
1390 * mt-opc.c: Regenerate.
1391 * xc16x-opc.c: Regenerate.
1392 * xstormy16-opc.c: Regenerate.
1393 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1396 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1398 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1400 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1402 * ppc-opc.c: Update copyright year.
1403 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1404 ordering for POWER4 and later and use the correct Server ordering.
1406 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1408 AVX Programming Reference (January, 2009)
1409 * i386-dis.c (PREFIX_VEX_3A44): New.
1410 (VEX_LEN_3A44_P_2): Likewise.
1411 (PREFIX_VEX_3A48): Updated.
1412 (VEX_LEN_3A4C_P_2): Likewise.
1413 (prefix_table): Add PREFIX_VEX_3A44.
1414 (vex_table): Likewise.
1415 (vex_len_table): Add VEX_LEN_3A44_P_2.
1417 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1418 * i386-tbl.h: Regenerated.
1420 2009-02-03 Sandip Matte <sandip@rmicorp.com>
1422 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1423 (mips_arch_choices): Add XLR entry.
1424 * mips-opc.c (XLR): Define.
1425 (mips_builtin_opcodes): Add XLR instructions.
1427 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1429 * Makefile.am: Add install-pdf target.
1430 * po/Make-in: Add install-pdf target.
1431 * Makefile.in: Regenerate.
1433 2009-02-02 DJ Delorie <dj@redhat.com>
1435 * mep-asm.c: Regenerate.
1436 * mep-desc.c: Regenerate.
1437 * mep-desc.h: Regenerate.
1438 * mep-dis.c: Regenerate.
1439 * mep-ibld.c: Regenerate.
1440 * mep-opc.c: Regenerate.
1441 * mep-opc.h: Regenerate.
1443 2009-01-29 Mark Mitchell <mark@codesourcery.com>
1445 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1448 2009-01-28 Chao-ying Fu <fu@mips.com>
1450 * mips-opc.c (suxc1): Add the flag of FP_D.
1452 2009-01-20 Alan Modra <amodra@bigpond.net.au>
1454 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1455 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1456 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1457 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1458 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1459 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1460 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1461 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1463 2009-01-16 Alan Modra <amodra@bigpond.net.au>
1465 * configure.in (commonbfdlib): Delete.
1466 (SHARED_LIBADD): Add pic libiberty if such is available.
1467 * configure: Regenerate.
1468 * po/POTFILES.in: Regenerate.
1470 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1472 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1473 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1474 operand form and enable the four operand form for POWER6 and later.
1475 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1476 three operand form for POWER6 and later.
1478 2009-01-14 Mike Frysinger <vapier@gentoo.org>
1480 * bfin-dis.c (OUTS): Use "%s" as format string.
1482 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1484 * i386-gen.c (cpu_flag_init): Remove a white space.
1485 (operand_type_init): Likewise.
1487 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1489 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1490 * i386-tbl.h: Regenerated.
1492 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1494 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1495 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1496 subS, xorS and cmpS.
1498 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1500 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1501 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1502 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1503 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1506 (set_bitfield): Take an argument, lineno. Don't report lineno
1507 on error if it is -1.
1508 (process_i386_cpu_flag): Take an argument, lineno.
1509 (process_i386_opcode_modifier): Likewise.
1510 (process_i386_operand_type): Likewise.
1511 (output_i386_opcode): Likewise.
1512 (opcode_hash_entry): Add lineno.
1513 (process_i386_opcodes): Updated.
1514 (process_i386_registers): Likewise.
1515 (process_i386_initializers): Likewise.
1517 * i386-opc.h (CpuP4): Removed.
1521 (CpuSYSCALL): Likewise.
1523 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1524 cpuclflush and cpusyscall.
1526 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1528 * i386-init.h: Regenerated.
1529 * i386-tbl.h: Likewise.
1531 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1533 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1534 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1535 (cpu_flags): Add CpuRdtscp.
1536 (set_bitfield): Remove CpuSledgehammer check.
1538 * i386-opc.h (CpuRdtscp): New.
1540 (i386_cpu_flags): Add cpurdtscp.
1542 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1543 * i386-init.h: Regenerated.
1544 * i386-tbl.h: Likewise.
1546 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1548 * ppc-opc.c (PPCNONE): Define.
1550 (powerpc_opcodes): Initialize the new "deprecated" field.
1552 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1554 AVX Programming Reference (December, 2008)
1555 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1556 (VEX_LEN_E7_P_2_M_0): Likewise.
1557 (VEX_LEN_2C_P_1): Updated.
1558 (VEX_LEN_E8_P_2): Likewise.
1559 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1560 (mod_table): Likewise.
1562 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1563 * i386-tbl.h: Regenerated.
1565 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1567 * i386-gen.c (process_copyright): Update for 2009.
1569 * i386-init.h: Regenerated.
1570 * i386-tbl.h: Likewise.
1572 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1574 AVX Programming Reference (December, 2008)
1575 * i386-dis.c (OP_VEX_FMA): Removed.
1576 (OP_EX_VexW): Likewise.
1577 (OP_EX_VexImmW): Likewise.
1578 (OP_XMM_VexW): Likewise.
1579 (VEXI4_Fixup): Likewise.
1580 (VPERMIL2_Fixup): Likewise.
1583 (Vex128FMA): Likewise.
1585 (EXdVexW): Likewise.
1586 (EXqVexW): Likewise.
1587 (EXVexImmW): Likewise.
1589 (VPERMIL2): Likewise.
1590 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1591 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1592 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1593 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1594 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1595 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1596 (get_vex_imm8): Likewise.
1597 (OP_EX_VexReg): Likewise.
1598 vpermil2_op): Likewise.
1600 (vex_w_dq_mode): Likewise.
1601 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1602 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1603 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1605 (PREFIX_VEX_38DB): Likewise.
1606 (PREFIX_VEX_3A4A): Likewise.
1607 (PREFIX_VEX_3A60): Likewise.
1608 (PREFIX_VEX_3ADF): Likewise.
1609 (VEX_LEN_3ADF_P_2): Likewise.
1610 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1611 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1612 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1613 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1614 PREFIX_VEX_3896...PREFIX_VEX_389F,
1615 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1616 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1617 (vex_table): Likewise.
1618 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1619 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1620 (putop): Support "%XW".
1621 (intel_operand_size): Handle vex_w_dq_mode.
1623 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1625 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1626 instructions. Add new FMA instructions.
1627 * i386-tbl.h: Regenerated.
1629 2009-01-02 Matthias Klose <doko@ubuntu.com>
1631 * or32-opc.c (or32_print_register, or32_print_immediate,
1632 disassemble_insn): Don't rely on undefined sprintf behaviour.
1634 For older changes see ChangeLog-2008
1640 version-control: never