opcodes/ChangeLog

   1 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
   4         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
   5         host_makefile_frag or frags.
   6         * aclocal.m4: New file.
   7         * configure: Rebuild.
   8         * Makefile.in (INSTALL): Set to @INSTALL@.
   9         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
  10         (INSTALL_DATA): Set to @INSTALL_DATA@.
  11         (AR): Set to @AR@.
  12         (AR_FLAGS): Set to rc rather than qc.
  13         (CC): Define as @CC@.
  14         (CFLAGS): Set to @CFLAGS@.
  15         (@host_makefile_frag@): Remove.
  16         (config.status): Remove dependency upon @frags@.
  17
  18         * configure.in: ../bfd/config.bfd now just sets shell variables.
  19         Use them rather than looking through target Makefile fragments.
  20         * configure: Rebuild.
  21
  22 start-sanitize-sh3e
  23 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  24
  25         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
  26
  27 end-sanitize-sh3e
  28 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
  29
  30         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
  31         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
  32         sparc64 insns.
  33
  34         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
  35         (lookup_{name,value}): New functions.
  36         (prefetch_table): New static local.
  37         (sparc_{encode,decode}_prefetch): New functions.
  38         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
  39
  40 start-sanitize-sh3e
  41 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  42
  43         * sh-opc.h: Add blank lines to improve readabililty of sh3e
  44         instructions.
  45
  46 end-sanitize-sh3e
  47 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  48
  49         * sh-dis.c: Correct comment on first line of file.
  50
  51 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
  52
  53         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
  54
  55         * sparc-opc.c (asi, membar): New static locals.
  56         (sparc_{encode,decode}_{asi,membar}): New functions.
  57         (sparc_opcodes, membar insn): Fix.
  58         * sparc-dis.c (print_insn): Call sparc_decode_asi.
  59         Support decoding of membar masks.
  60         (X_MEMBAR): Define.
  61
  62 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
  63
  64         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
  65
  66 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
  67
  68         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
  69         and likewise for the other branches.  Add bhs as an alias for bcc,
  70         and likewise for the size variants.  Add dbhs as an alias for
  71         dbcc.
  72
  73 start-sanitize-sh3e
  74 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
  75
  76         * sh-opc.h (FP sts instructions): Update to match reality.
  77
  78 end-sanitize-sh3e
  79 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
  80
  81         * m68k-dis.c: (fpcr_names): Add % before all register names.
  82         (reg_names): Likewise.
  83         (print_insn_arg): Don't explicitly print % before register names.
  84         Add % before register names in static array names.  In case 'r',
  85         print data registers as `@(Dn)', not `Dn@'.  When printing a
  86         memory address, don't print @# before it.
  87         (print_indexed): Change base_disp and outer_disp from int to
  88         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
  89         syntax.  Sign extend 8 byte displacement correctly.
  90         (print_base): Print using MIT syntax.  Print zpc when appropriate.
  91         Change parameter disp from int to bfd_vma.
  92
  93         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
  94         for jsr.
  95
  96 start-sanitize-sh3e
  97 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
  98
  99         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 100         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 101         * sh-opc.h (sh_arg_type): Add new operand types.
 102         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 103
 104 end-sanitize-sh3e
 105 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 106
 107         * Makefile.in (distclean): Remove generated file config.h.
 108
 109 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 110
 111         * Makefile.in (distclean): Remove generated file config.h.
 112
 113 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 114
 115         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 116         Clean up tables.
 117         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 118         (opcode): Remove.
 119         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 120         rather than numopcodes.  Use m68k_opcodes rather than removed
 121         opcode function.  Don't check F_ALIAS.
 122         (print_insn_arg): Change first parameter to be const char *.
 123         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 124         (m68k-opc.o): New target.
 125         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 126         * configure: Rebuild.
 127
 128 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 129
 130         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 131         (opcode_bits, opcode_hash_table): New variables.
 132         (opcodes_initialized): Renamed from opcodes_sorted.
 133         (build_hash_table): New function.
 134         (is_delayed_branch): Use hash table.
 135         (print_insn): Renamed from print_insn_sparc, made static.
 136         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 137         and vice-versa if sparc64.
 138         (print_insn_sparc, print_insn_sparc64): New functions.
 139         (compare_opcodes): Move sparc64 opcodes to end.
 140         Print commutative insns with constant second.
 141         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 142
 143 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 144
 145         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 146         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 147         avoids printing a delay slot in a delay slot.
 148         * sh-opc.h (sh_table): Fully bracket last entry.
 149
 150 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 151
 152         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 153
 154 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 155
 156         * configure.in: Get host_makefile_frag from ${srcdir}.
 157
 158         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 159         config.h from config.in.  Don't set up sysdep.h link.
 160         * sysdep.h: New file.
 161         * configure, config.in: New files, generated from configure.in.
 162         * Makefile.in: Updated to be processed autoconf-style.
 163         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 164         (Makefile): Depend on config.status.
 165         (config.status): New rule.
 166         * configure.bat: Update Makefile substitutions.
 167
 168 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 169
 170         * mips-opc.c (L1): Define.
 171         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 172         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 173         and wb.
 174
 175 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 176
 177         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 178         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 179         have multiple add units but only a single logical unit.
 180
 181         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 182         shifted by 18, without any insertion or extraction function.
 183         (insert_cr, extract_cr): Remove.
 184
 185 start-sanitize-arc
 186 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 187
 188         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 189
 190 end-sanitize-arc
 191 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 192
 193         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 194         register names.
 195
 196 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 197
 198         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 199         * sh-opc.h: Add copyright.
 200
 201 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 202
 203         * Makefile.in (crunch-m68k): Delete extra target accidentally
 204         checked in a while ago.
 205
 206 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 207
 208         * sh-opc.h (sh_table): Add SH3 support.
 209
 210 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 211
 212         * sh-opc.h: Added bsrf and braf.
 213
 214 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 215
 216         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 217         bogus [ls]fm{ea,fd} patterns.
 218
 219         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 220         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 221         initialize it from memory.  Make function static.
 222         (print_insn_{big,little}_arm): New functions.
 223         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 224         the correct endianness.
 225
 226 start-sanitize-arc
 227 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 228
 229         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 230         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 231 end-sanitize-arc
 232
 233 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 234
 235         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 236         enum list.
 237
 238 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 239
 240         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 241         17th, so that it builds again using GCC as the compiler.
 242
 243 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 244
 245         * mips-dis.c (print_insn_little_mips): Cast return value from
 246         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 247         expects an unsigned long, and that might be fewer words of
 248         argument storage (e.g., if bfd_vma is long long on a 32-bit
 249         machine).
 250         (print_insn_big_mips): Likewise with bfd_getb32 value.
 251         (_print_insn_mips): Now static.
 252
 253 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 254
 255         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 256         gcc memory hog problem with initializer is fixed.
 257
 258 start-sanitize-arc
 259 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 260
 261         * arc-opc.c (NULL): Define.
 262         (arc_operands, insn fields u,s): Delete.
 263         (arc_operands, insn fields a,b,c): Mark as signed.
 264         (arc_opcodes): No longer const, links computed at run-time.
 265         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 266         suffixes that affect the insn code.
 267         (arc_opcodes): Resort table to macros are first.
 268         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 269         (arc_opcodes, st [b] entry): Likewise.
 270         (arc_opcodes, st [b,d] entry): Fix mask, value.
 271         (arc_reg_names): Add entries for r29, r30, r31, r60.
 272         (opcode_map, icode_map): New static globals.
 273         (arc_opcode_init_tables): Initialize them.
 274         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 275         (insert_shimmoffset): Signal error if register present.
 276         Validate constant.
 277         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 278 end-sanitize-arc
 279
 280 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 281
 282         Merge in support for Mac MPW as a host.
 283         (Old change descriptions retained for informational value.)
 284
 285         * mpw-config.in (archname): Compute from the config.
 286         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 287
 288         * mpw-config.in (target_arch): Compute from canonical target.
 289         (m68k, mips, powerpc, sparc): Add architectures.
 290         * mpw-make.in (disassemble.c.o): Add.
 291         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 292
 293         * mpw-config.in (BFD_MACHINES): Set to a default value.
 294         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 295
 296         * mpw-make.in (CSEARCH): Add extra-include to search path.
 297
 298         * mpw-config.in (varargs.h): Don't create.
 299         (sysdep.h): Create using forward-include.
 300         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 301
 302         * mpw-config.in: New file, MPW version of configure.in.
 303         * mpw-make.in: New file, MPW version of Makefile.in.
 304
 305 start-sanitize-arc
 306 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 307
 308         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 309         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 310         (print_insn_*): Pass bfd mach number, not opcode version.
 311         * arc-opc.c (arc_get_opcode_mach): New function.
 312 end-sanitize-arc
 313
 314 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 315
 316         * alpha-dis.c (print_insn_alpha): Put empty statement after
 317         default label.
 318
 319 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 320
 321         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 322         (low_sign_extend): Likewise.
 323         (get_field): Delete unused function.
 324         (set_field, deposit_14, deposit_21): Likewise.
 325
 326 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 327
 328         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 329           (guy@netapp.com).
 330
 331 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 332
 333         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 334
 335         * alpha-opc.h (OSF_ASMCODE): define
 336         print pal-code names as defined in App C of the
 337         Alpha Architecture Reference Manual
 338
 339         * alpha-dis.c: cleaned up output
 340         print stylized code forms as defined in App A.4.3 of the
 341         Alpha Architecture Reference Manual
 342
 343 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 344
 345         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 346         `rfe'.
 347         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 348         'N', and 'M'.
 349
 350 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 351
 352         * m68k-dis.c (opcode): New function.  Returns address of opcode
 353         table entry given index, even if the opcode table was split to
 354         work around gcc bugs.
 355         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 356         directly.
 357         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 358         (reg_names): Now const.
 359         (print_insn_arg): Arrays cacheFieldName and names now const.
 360         (print_indexed): Array scales now const.
 361
 362 start-sanitize-arc
 363 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 364
 365         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 366         (print_insn_arc_{host,graphics,audio}): Likewise.
 367         (print_insn): Add prototype.
 368         (arc_get_disassembler): New arg `big_p'.  Return little or big
 369         print fn accordingly.
 370         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 371         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 372         (arc_opval_supported): Likewise.
 373         * disassemble.c (disassembler): Pass big endian flag to
 374         arc_get_disassembler.
 375 end-sanitize-arc
 376
 377 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 378
 379         * ppc-opc.c: Sort recently added instructions by minor opcode
 380         number within major opcode number.
 381
 382 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 383
 384         * hppa-dis.c: Include libhppa.h.
 385
 386 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 387
 388         * mips-opc.c: Change dli to use M_DLI, and add dla.
 389
 390 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 391
 392         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 393
 394 start-sanitize-arc
 395 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 396
 397         * arc-dis.c (arc_get_disassembler): Change argument to int,
 398         one of bfd_mach_arc_xxx.  All callers updated.
 399 end-sanitize-arc
 400
 401 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 402
 403         * mips-opc.c: Add r4650 mul instruction.
 404
 405 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 406
 407         * mips-opc.c: Add uld and usd macros for unaligned double load and
 408         store.
 409
 410 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 411
 412         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 413         mfdcr, mtdcr, icbt, iccci.
 414
 415 start-sanitize-arc
 416 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 417
 418         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 419         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 420         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 421         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 422         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 423         (insert_absaddr): New function.
 424
 425 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 426
 427         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 428         New argument `cpu', pass it to arc_opcode_init_tables.
 429         Document byte order dependencies.  Ignore unsupported insns.
 430         (arc_get_disassembler): New function.
 431         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 432         print_insn_arc_audio): New functions.
 433         * arc-opc.c (MULTSHIFT operand): Delete.
 434         (UNSIGNED, SATURATION): New operands.
 435         (mac, mul, mul64, mulu64): New insns.
 436         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 437         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 438         (host,graphics,audio extended and auxiliary regs): Define.
 439         (ss, sc, mh, ml): New suffixes.
 440         (arc_opcode_supported, arc_opval_supported): New functions.
 441         (insert_multshift, extract_multshift): Deleted.
 442         * disassemble.c (disassembler, case bfd_arch_arc): Call
 443         arc_get_disassembler to get disassembler routine.
 444 end-sanitize-arc
 445
 446 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 447
 448         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 449         signed char fields to shorts, more portable.
 450
 451 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 452
 453         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 454         char fields as signed chars, since they may have negative values.
 455
 456 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 457
 458         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 459           (mycroft@netbsd.org).
 460
 461 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 462
 463         From "Logg, Ed" <elogg@ea.com>:
 464         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 465         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 466         value.
 467
 468 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 469
 470         * ppc-opc.c: Changes based on patch from David Edelsohn
 471         <edelsohn@mhpcc.edu>.
 472         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 473         SPR.
 474         (FXM_MASK): Define.
 475         (insert_tbr): New static function.
 476         (extract_tbr): New static function.
 477         (XFXFXM_MASK, XFXM): Define.
 478         (XSPRBAT_MASK, XSPRG_MASK): Define.
 479         (powerpc_opcodes): Add instructions to access special registers by
 480         name.  Add mtcr and mftbu.
 481
 482 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 483
 484         * mips-opc.c (P3): Define.
 485         (mips_opcodes): Add mad and madu.
 486
 487 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 488
 489         * configure.in: Add W65 support.
 490         * disassemble.c: Likewise.
 491         * w65-opc.h, w65-dis.c: New files.
 492
 493 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 494
 495         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 496         immediates.
 497
 498 start-sanitize-arc
 499 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 500
 501         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 502         slot.
 503         * arc-opc.c (extract_reladdr): New function.
 504         (insert_reladdr): Store address right-shifted by 2.
 505 end-sanitize-arc
 506
 507 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 508
 509         * mips-opc.c: Add dli as a synonym for li.
 510
 511 start-sanitize-arc
 512 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 513
 514         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 515         All uses changed.
 516         (extraction fns): Insn argument now array of two words.  Return pointer
 517         to value's table entry.  All uses changed.
 518         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 519         (insert_multshift, extract_multshift): New fns.
 520         (arc_operands): Add support for cache bypass suffix.  Add support for
 521         predefined aux regs.  Modifier bits moved to flags field.
 522         (arc_opcodes): Likewise.
 523         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 524         New insn rlc.  Update to syntax in programmer's manual.
 525         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 526         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 527         bypass.
 528         (arc_opcode_init_tables): New argument to indicate cpu type.
 529         (insert_reg): Handle predefined aux regs.
 530         (extract_reg): Likewise.
 531         (lookup_register): New fn.
 532         * arc-dis.c (arc_condition_codes): Deleted.
 533         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 534         Clean up modifier handling.  Handle predefined aux regs.
 535 end-sanitize-arc
 536
 537 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 538
 539         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 540         print something for reserved opcode values, even if it won't
 541         assemble again.
 542
 543         * mips-dis.c (_print_insn_mips): When initializing, shift right
 544         and mask, to avoid sign extension problems on the Alpha.
 545
 546         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 547         control registers.
 548
 549 start-sanitize-arc
 550 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 551
 552         * configure.in: Add ARC support.
 553         * disassemble.c: Likewise.
 554         * arc-dis.c, arc-opc.c: New files.
 555 end-sanitize-arc
 556
 557 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 558
 559         * sh-opc.h (mov.l gbr): Get direction right.
 560         * sh-dis.c (print_insn_shx): New function.
 561         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 562         print opcodes with right byte order.
 563
 564 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 565
 566         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 567         to avoid conflicts with getopt.
 568
 569 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 570
 571         * hppa-dis.c (print_insn_hppa): Read the instruction using
 572         bfd_getb32, so that it works on a little endian or 64 bit host.
 573         Remove unused local variable op.
 574
 575 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 576
 577         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 578         addu does not work correctly if -mips3.
 579
 580 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 581
 582         * a29k-dis.c (print_special): Add special register names defined
 583         on 29030, 29040 and 29050.
 584         (print_insn): Handle new operand type 'I'.
 585
 586 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 587
 588         * Makefile.in (INSTALL): Use top level install.sh script.
 589
 590 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 591
 592         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 593         that it works on a little endian host.
 594
 595 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 596
 597         * configure.in: Use ${config_shell} when running config.bfd.
 598
 599 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 600
 601         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 602
 603 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 604
 605         * a29k-dis.c (print_insn): Print the opcode.
 606
 607 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 608
 609         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 610
 611 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 612
 613         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 614
 615 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 616
 617         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 618         which store a value into memory.
 619
 620 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 621
 622         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 623         * arm-dis.c, arm-opc.h: New files.
 624
 625 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 626
 627         * Makefile.in (ns32k-dis.o): Add dependency.
 628         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 629         string, not as array of chars.
 630
 631 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 632
 633         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 634
 635         * sparc-opc.c: Added sparclite extended FP operations, and
 636         versions of v9 impdep* instructions permitting specification of
 637         the OPF field.
 638
 639 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 640
 641         * i960-dis.c (reg_names): Now const.
 642         (struct sparse_tabent): New type, copied from array type in mem
 643         function.
 644         (ctrl): Local static array ctrl_tab now const.
 645         (cobr): Local static array cobr_tab now const.
 646         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 647         static variable mem_tab no longer explicitly initialized.  Changed
 648         mem_init to const array of struct sparse_tabent.
 649         (reg): Local static variable reg_tab no longer explicitly
 650         initialized.  Changed reg_init to const array of struct
 651         sparse_tabent.
 652         (ea): Local static array scale_tab now const.
 653
 654         start-sanitize-i960xl
 655         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 656         (REG_MAX): Updated.
 657         end-sanitize-i960xl
 658
 659 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 660
 661         * configure.bat: the disassember needs to be enabled for
 662         "objdump -d" to work in djgpp.
 663
 664 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 665
 666         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 667         (invalid_float): Enabled general version, doesn't require running
 668         on ns32k host.  Changed to take char* argument, and test for
 669         explicitly specified sizes, instead of using sizeof() on host CPU
 670         types.
 671         (INVALID_FLOAT): Cast first argument.
 672         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 673         list_P032, list_M032): Now const.
 674         (optlist, list_search): Made appropriate arguments now point to
 675         const.
 676         (print_insn_arg): Changed static array of one-character-string
 677         pointers into a static const array of characters; fixed sprintf
 678         statement accordingly.
 679
 680 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 681
 682         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 683         from distribution. A ns32k-dis.c from a previous distribution has
 684         been brought up to date and supports the new interface.
 685
 686         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 687
 688         * configure.in: add bfd_ns32k_arch target support.
 689
 690         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 691         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 692
 693 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 694
 695         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 696         disassembly right.
 697
 698 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 699
 700         * h8300-dis.c, mips-dis.c: Don't use true and false.
 701
 702 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 703
 704         * configure.in: Change --with-targets to --enable-targets.
 705
 706 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 707
 708         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 709         opcodes to the first instruction with that opcode, to speed
 710         disassembly of large files.  From ralphc@pyramid.com (Ralph
 711         Campbell).
 712
 713 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 714
 715         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 716
 717 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 718
 719         * configure.bat: update to latest makefile.in
 720
 721 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 722
 723         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 724         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 725         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 726         slot insn is in a delay slot.
 727         * z8k-opc.h: (resflg): Fix patterns.
 728         * h8500-opc.h Fix CR insn patterns.
 729
 730 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 731
 732         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 733         "cmpl" before POWER versions, so that gas -many uses them.
 734
 735 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 736
 737         * disassemble.c: New file.
 738         * Makefile.in (OFILES): Add disassemble.o.
 739         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 740         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 741         binutils/configure.in.
 742
 743         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 744         opcode being examined.
 745
 746 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 747
 748         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 749         (insert_ral, insert_ram, insert_ras): New functions.
 750         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 751         RAS for store with update.
 752
 753 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 754
 755         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 756         (edelsohn@npac.syr.edu).
 757
 758 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 759
 760         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 761         immediate argument.
 762
 763 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 764
 765         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 766
 767 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 768
 769         * ppc-opc.c (powerpc_operands): The signedp field has been
 770         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 771         instead.  Add new operand SISIGNOPT.
 772         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 773         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 774         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 775         than signedp field.
 776
 777 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 778
 779         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 780         is a reserved word for dynix cc.
 781
 782 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 783
 784         * configure.in: Change error message to refer to bfd/config.bfd
 785         rather than bfd/configure.in.
 786
 787 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
 788
 789         * ppc-opc.c: Define POWER2 as short alias flag.
 790         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
 791         fsqrt.
 792
 793 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 794
 795         * i960-dis.c (print_insn_i960): Don't read a second word for
 796         opcodes 0, 1, 2 and 3.
 797
 798 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 799
 800         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
 801
 802 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 803
 804         * m68881-ext.c: Removed; no longer used.
 805         * Makefile.in: Changed accordingly.
 806
 807         * m68k-dis.c (ext_format_68881): Don't declare.
 808         (print_insn_m68k): If an instruction uses place 'i', it uses at
 809         least four fixed bytes.
 810         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
 811         extended float, convert to double using floatformat_to_double, not
 812         ieee_extended_to_double, and fetch the data before converting it.
 813
 814 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 815
 816         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
 817         davidj@ICSI.Berkeley.EDU (David Johnson).
 818
 819 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 820
 821         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
 822         PowerPC uses bdnz[l][a].
 823
 824 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 825
 826         * dis-buf.c, i386-dis.c:  Include sysdep.h.
 827
 828 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 829
 830         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
 831
 832         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
 833         by Motorola PowerPC 601 with PPC_OPCODE_601.
 834         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
 835         Disassemble Motorola PowerPC 601 instructions as well as normal
 836         PowerPC instructions.
 837
 838 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 839
 840         * i960-dis.c (reg, mem): Just use a static array instead of
 841         calling xmalloc.
 842
 843 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 844
 845         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
 846         condition name index if this is for a negated condition.
 847
 848         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
 849         Floating point format for 'H' operand is backwards from normal
 850         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
 851         operands (fmpyadd and fmpysub), handle bizarre register
 852         translation correctly for single precision format.
 853
 854         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
 855         or 'I' operands if the next format specifier is 'M' (fcmp
 856         condition completer).
 857
 858 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 859
 860         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
 861         single number giving a bitmask for the MB and ME fields of an M
 862         form instruction.  Change NB to accept 32, and turn it into 0;
 863         also turn 0 into 32 when disassembling.  Seperated SH from NB.
 864         (insert_mbe, extract_mbe): New functions.
 865         (insert_nb, extract_nb): New functions.
 866         (SC_MASK): Mask out SA and LK bits.
 867         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
 868         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
 869         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
 870         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
 871         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
 872         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
 873         (powerpc_macros): Define table of macro definitions.
 874         (powerpc_num_macros): Define.
 875
 876         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
 877         if PPC_OPERAND_NEXT is set.
 878
 879 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 880
 881         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
 882         char.  Retrieve contents using bfd_getl32 instead of shifting.
 883
 884 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 885
 886         * ppc-opc.c: New file.  Opcode table for PowerPC, including
 887         opcodes for POWER (RS/6000).
 888         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
 889         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
 890         (CFILES): Add ppc-dis.c.
 891         (ppc-dis.o, ppc-opc.o): New targets.
 892         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
 893
 894 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 895
 896         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
 897         No space before 'u', 'f', or 'N'.
 898
 899 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 900
 901         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
 902         farther than we should.
 903
 904         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
 905
 906 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 907
 908         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
 909
 910 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 911
 912         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
 913         needs it, to prevent reading past the end of a section.
 914
 915 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 916
 917         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
 918         Removed t,A case for la; always use t,A(b) case.
 919
 920 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 921
 922         From Ted Lemen <mellon@pepper.ncd.com>
 923         * mips-dis.c (print_insn_arg): Handle 'k'.
 924         * mips-opc.c: Make cache use k, not t.
 925
 926 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 927
 928         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
 929         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
 930         FLOAT_FORMAT_CODE to put out floating point register names.
 931
 932 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 933
 934         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
 935
 936 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 937
 938         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
 939
 940 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 941
 942         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
 943         larger than 32.  Moved dsxx32 variants first for disassembler.
 944
 945 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 946
 947         * z8kgen.c, z8k-opc.h: Add full lda information.
 948
 949 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
 950
 951         * hppa-dis.c (print_insn_hppa): Do not emit a space after
 952         movb instructions.  Any necessary space will be emitted by
 953         the code to handle nullification completers.
 954
 955 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 956
 957         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
 958
 959 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 960
 961         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
 962         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
 963
 964 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 965
 966         * mips-opc.c: Correct lwu opcode value (book had it wrong).
 967
 968 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 969
 970         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
 971         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
 972
 973 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
 974
 975         * m88k-dis.c (m88kdis): comment change.  Remove space after
 976           printing mnemonic.
 977           (printop): handle new arg types DEC and XREG for m88110.
 978
 979 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
 980
 981         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
 982         type for absolute branch addresses.  Delete special
 983         "ble" and "be" code in 'W' operand code.
 984
 985 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 986
 987         * mips-opc.c: Set hazard information correctly for branch
 988         likely instructions.
 989
 990 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 991
 992         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
 993         info->fprintf_func for printing and info->print_address_func for
 994         address output.
 995
 996 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 997
 998         * mips-opc.c: Set INSN_TRAP for tXX instructions.
 999
1000 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1001
1002         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1003         Corrected second case of "b" for disassembler.
1004
1005 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1006
1007         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1008         to BFD swapping routines to correspond to BFD name changes.
1009
1010 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1011
1012         * mips-opc.c: Change div machine instruction to be z,s,t rather
1013         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1014         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1015         rem and remu which generates only the corresponding div
1016         instruction.  This is for compatibility with the MIPS assembler,
1017         which only generates the simple machine instruction when an
1018         explicit destination of $0 is used.
1019         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1020
1021 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1022
1023         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1024         WR_31 hazard for bal, bgezal, bltzal.
1025
1026 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1027
1028         * hppa-dis.c (print_insn_hppa): Use print function
1029         from within the disassemble_info, not fprintf_filtered.
1030
1031 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1032
1033         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1034         Law, law@cs.utah.edu.)
1035
1036 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1037
1038         * mips-opc.c ("absu"): Removed.
1039         ("dabs"): Added.
1040
1041 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1042
1043         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1044         Changed hazard information to distinguish between memory load
1045         delays and coprocessor load delays.
1046
1047 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1048
1049         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1050
1051 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1052
1053         * configure.in: Don't pass cpu to config.bfd.
1054
1055 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1056
1057         * m88k-dis.c (m88kdis): Make class unsigned.
1058
1059 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1060
1061         * alpha-dis.c (print_insn_alpha): One branch format case was
1062         missing the instruction name.
1063
1064 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1065
1066         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1067         Add the arch-specific auxiliary files.
1068         (OFILES): Remove the arch-specific auxiliary files
1069         and use BFD_MACHINES instead of DIS_LIBS.
1070         * configure.in: Set BFD_MACHINES based on --with-targets option.
1071
1072 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1073
1074         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1075         for swc1.
1076
1077 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1078
1079         * sparc-opc.c: Change CONST to const to deal with gcc
1080         -Dconst=__const -traditional.
1081
1082 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1083
1084         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1085         coprocessor instructions out of #if 0, and made them use new
1086         argument type "C".
1087
1088 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1089
1090         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1091
1092 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1093
1094         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1095         instruction, for use by the disassembler.
1096
1097         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1098         hand-coded sign extensions that depended on 32-bit host ints.
1099         FIXME, we still depend on big-endian host bitfield ordering.
1100         (sparc_print_insn):  Set the insn_info_valid field, and the
1101         other fields that describe the instruction being printed.
1102
1103 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1104
1105         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1106         `jmp' instead of just one of them.
1107
1108 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1109
1110         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1111         (fput_fp_reg_r): Renamed from fput_reg_r.
1112         (fput_fp_reg): New function.
1113         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1114
1115         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1116
1117         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1118
1119 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1120
1121         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1122
1123         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1124         don't output a space.
1125
1126         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1127
1128 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1129
1130         * mips-opc.c: New file, containing opcode table from
1131         ../include/opcode/mips.h.
1132         * Makefile.in: Add it.
1133
1134 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1135
1136         * m88k-dis.c: New file, moved in from gdb and changed to use the
1137         new dis-asm.h disassembler interface.
1138         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1139         (m88k-dis.o): New target.
1140
1141 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1142
1143         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1144         argument string const char * to correspond to opcode/mips.h.
1145
1146 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1147
1148         * mips-dis.c: Updated to account for name changes in new version
1149         of opcode/mips.h.
1150         * Makefile.in: Added header file dependencies.
1151
1152 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1153
1154         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1155
1156 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1157
1158         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1159         extend, rather than shifts.
1160
1161 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1162
1163         * Makefile.in: Undo 15 June change.
1164
1165 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1166
1167         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1168         or error code.
1169         * m68k-dis.c:  Re-write to detect invalid operands before
1170         printing anything, so we can handle this the same way we
1171         handle invalid opcodes.
1172
1173 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1174
1175         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1176
1177 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1178
1179         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1180         header files.
1181
1182 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1183
1184         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1185
1186         * configure.in: Do make sysdep.h link.
1187         * Makefile.in: Search ../include.  Don't search ../bfd.
1188
1189 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1190
1191         Changes from Jeff Law, law@cs.utah.edu:
1192         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1193         Do not print a space before the completers specified by
1194         'a' and 'd'.
1195
1196 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1197
1198         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1199         defined, since gdb has been fixed.
1200
1201         Changes from Jeff Law, law@cs.utah.edu:
1202         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1203         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1204         be a *disassemble_info, not a *FILE.
1205         * hppa-dis.c: Support 'd', '!', and 'a'.
1206         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1207         * hppa-dis.c: Delete cases which are no longer needed.
1208
1209 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1210
1211         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1212
1213 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1214
1215         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1216         H8/300-H opcodes.
1217
1218 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1219
1220         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1221         * configure.in:  No longer need to configure to get sysdep.h.
1222
1223 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1224
1225         * Patches from Jeffrey Law <law@cs.utah.edu>.
1226         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1227         templates for 1.1 FP computational instructions.
1228
1229 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1230
1231         * h8500-dis.c (print_insn_h8500): Address argument is type
1232         bfd_vma.
1233         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1234         Ditto.
1235
1236         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1237         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1238
1239         * sparc-dis.c (compare_opcodes): Move static declaration to
1240         top-level.
1241
1242 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1243
1244         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1245         instruction, remove unimp hack from 'l' argument.
1246
1247 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1248
1249         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1250         happy.
1251
1252 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1253
1254         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1255         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1256         instructions.
1257
1258 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1259
1260         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1261         arrays of string pointers to 2-d arrays of chars, to save
1262         space.
1263
1264 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1265
1266         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1267         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1268
1269 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1270
1271         * hppa-dis.c: New file from Utah, adapted to new disassembler
1272         calling interface.
1273         * Makefile.in: Include it.
1274
1275 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1276
1277         * sh-dis.c, sh-opc.h: New files.
1278
1279 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1280
1281         * alpha-dis.c, alpha-opc.h: New files.
1282
1283 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1284
1285         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1286         value.
1287
1288 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1289
1290         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1291
1292 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1293
1294         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1295         const.
1296
1297 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1298
1299         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1300         and double percent signs a few places.
1301
1302         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1303
1304         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1305         Use info->print_address_func not print_address.
1306
1307         * dis-buf.c (generic_print_address): New function.
1308
1309 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1310
1311         * Makefile.in: Add sparc-dis.c.
1312         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1313         From GDB:
1314             Add `add' instruction to the set that get checked
1315             for a preceding `sethi' in order to print an absolute address.
1316             * (print_insn):  Disassembly prefers real instructions.
1317             (is_delayed_branch):  Speed up.
1318             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1319             Still missing some float ops, and needs testing.
1320             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1321             F_ALIAS.  Use printf, not fprintf, when not passing a file
1322             pointer...
1323             (compare_opcodes): Check that identical instructions have
1324             identical opcodes, complain otherwise.
1325         From binutils:
1326             * New 'm' arg.
1327             * Include reg_names.
1328         From neither:
1329             Use dis-asm.h/read_memory_func interface.
1330
1331 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1332
1333         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1334           deliberately return non-zero to setjmp from longjmp.  Otherwise
1335           this code fails to compile.
1336
1337 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1338
1339         * m68k-dis.c:  Fix prototype for fetch_arg().
1340
1341 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1342
1343         * dis-buf.c: New file, for new read_memory_func interface.
1344         Makefile.in (OFILES): Include it.
1345         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1346         Use new read_memory_func interface.
1347
1348 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1349
1350         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1351         * h8500-opc.h: Fix couple of opcodes.
1352
1353 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1354
1355         * Makefile.in: add dvi & installcheck targets
1356
1357 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1358
1359         * Makefile.in:  Update for h8500-dis.c.
1360
1361 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1362
1363         * h8500-dis.c, h8500-opc.h: New files
1364
1365 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1366
1367         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1368         ../include/dis-asm.h.
1369         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1370         and ../gdb/m68k-pinsn.c).
1371         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1372         and ../gdb/i386-pinsn.c).
1373         * m68881-ext.c:  New file.  Moved definition of
1374         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1375         * Makefile.in:  Adjust for new files.
1376         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1377         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1378         can be dis-assembled.
1379
1380 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1381
1382         * mips-dis.c (print_insn_arg): Now returns void.
1383
1384 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1385
1386         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1387         files that use the macros.
1388
1389 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1390
1391         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1392         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1393         (CFILES): Added mips-dis.c.
1394
1395 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1396
1397         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1398         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1399
1400 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1401
1402         * Makefile.in:  Improve *clean rules.
1403         * configure.in:  Allow a default host.
1404
1405 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1406
1407         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1408         files include other sysdep files
1409
1410 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1411
1412         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1413
1414 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1415
1416         * configure.in:  For host support, use ../bfd/configure.host
1417         so it stays in sync with the ../bfd/hosts database.
1418
1419 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1420
1421         * configure.in: use cpu-vendor-os triple instead of nested cases
1422
1423 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1424
1425         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1426         *always* the wrong one.
1427
1428 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1429
1430         * z8kgen.c: added copyright info
1431
1432 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1433
1434         * z8k-dis.c (unparse_instr): prettier tabs
1435         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1436
1437 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1438
1439         * configure.in:  Add ncr* configuration.
1440         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1441         picayune ANSI compilers happy.
1442
1443 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1444
1445         * configure.in (i386):  Make i386 and i486 synonymous for now.
1446         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1447
1448 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1449
1450         * Makefile.in (install): Fix typo.
1451
1452 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1453
1454         * Makefile.in (make):  Remove obsolete crud.
1455         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1456
1457 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1458
1459         * Makefile.in: since there are no SUBDIRS, remove rule and
1460         references of subdir_do.
1461
1462 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1463
1464         * Makefile.in (install): Get the library name right here too.
1465         Don't install bfd.h, since it's unrelated to this library.  No
1466         subdirs to recurse into, either.
1467         (CFILES): The source file has a .c suffix, not .o.
1468
1469         * sparc-opc.c: New file, moved from BFD.
1470         * Makefile.in (OFILES): Build it.
1471
1472 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1473
1474         * z8k-dis.c: fixed forward refferences of some declarations.
1475
1476 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1477
1478         * Makefile.in: get the name of the library right
1479
1480 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1481
1482         * z8k-dis.c: knows how to disassemble z8k stuff
1483         * z8k-opc.h: new file full of z8000 opcodes
1484
1485 \f
1486 Local Variables:
1487 version-control: never
1488 End: