2 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
4 * vu0.h: Specs changed for VCALLMSR bit pattern.
5 * mips-dis.c: (print_insn_arg) Matching change.
8 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
10 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
13 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
15 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
16 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
17 * configure.in: Define and substitute WIN32LDFLAGS and
19 * aclocal.m4: Rebuild with new libtool.
20 * configure, Makefile.in: Rebuild.
23 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
25 * vu0.h: Corrected bit pattern for VMAXI opcode.
28 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
30 * m32r-opc.c: Regenerate.
33 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
35 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
36 (dvp_expand_macro): Implement.
37 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
38 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
41 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
43 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
44 before trying to copy it.
45 * Makefile.in: Rebuild.
47 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
49 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
52 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
54 * m32r-opc.c: Fix bit patterns for SAT and SATB.
57 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
59 * ns32k-dis.c (bit_extract_simple): New function to extract bits
60 from an arbitrary valid buffer instead of fetching them on demand
62 (invalid_float): use bit_extract_simple() instead of bit_extract().
65 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
67 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
68 * m32r-opc.h: Add extra control registers.
71 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
73 From H.J. Lu <hjl@gnu.org>:
74 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
77 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
79 * Branched binutils 2.9.
82 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
84 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
85 disassembling last 4 bytes of a section.
88 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
90 Fix some gcc -Wall warnings:
91 * arc-dis.c (print_insn): Add casts to avoid warnings.
92 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
93 * d10v-dis.c (dis_long, dis_2_short): Likewise.
95 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
96 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
97 (parse_bc, parse_vfreg, parse_accdest): Likewise.
98 (parse_ffstreg, parse_vif_mode): Likewise.
100 * m10200-dis.c (disassemble): Likewise.
101 * m10300-dis.c (disassemble): Likewise.
102 * ns32k-dis.c (print_insn_ns32k): Likewise.
103 * ppc-opc.c (insert_ral, insert_ram): Likewise.
104 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
105 * cgen-opc.c (cgen_keyword_search_next): Likewise.
106 * d10v-dis.c (dis_long, dis_2_short): Likewise.
108 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
111 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
112 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
113 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
115 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
117 * tic80-dis.c (print_one_instruction): Likewise.
119 * w65-dis.c (print_operand): Likewise.
120 * z8k-dis.c (fetch_data): Likewise.
121 * a29k-dis.c: Add return type for find_byte_func_type.
122 * arc-opc.c: Include <stdio.h>. Remove declarations of
123 insert_multshift and extract_multshift.
125 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
127 (extract_value): Fully parenthesize expression.
130 * dvp-opc.c: Include <ctype.h>.
131 (print_sdest): Add default case to switch.
133 * h8500-dis.c (print_insn_h8500): Initialize local variables.
134 * h8500-opc.h (h8500_table): Fully bracket initializer.
135 * w65-opc.h (optable): Likewise.
136 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
137 * i386-dis.c (OP_E): Initialize local variables.
138 * m10200-dis.c (print_insn_mn10200): Likewise.
139 * mips-dis.c (print_insn_mips16): Likewise.
140 * sh-dis.c (print_insn_shx): Likewise.
141 * v850-dis.c (print_insn_v850): Likewise.
142 * ns32k-dis.c (print_insn_arg): Declare.
143 (get_displacement, invalid_float): Declare.
144 (list_search, sign_extend, flip_bytes): Declare return type.
145 (get_displacement): Likewise.
146 (print_insn_arg): Likewise. Make d int. Fix sprintf format
148 (print_insn_ns32k): Make i unsigned.
149 (invalid_float): Make static. Declare type of val.
150 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
151 on each for iteration.
152 * tic30-dis.c (get_indirect_operand): Likewise.
153 * z8k-dis.c (print_insn_z8001): Declare return type.
154 (print_insn_z8002): Likewise.
155 (unparse_instr): Fix sprintf format strings.
157 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
159 * mips-opc.c: Add "sync.l" and "sync.p".
162 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
164 * dvp-opc.c (extract_vif_datalen): Rewrite.
165 (vif_insn_len): Perform 0->max+1 conversion for direct length.
167 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
169 * dvp-dis.c (print_insn): Print unpack address in hex.
170 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
171 Don't skip over '*', just record it.
172 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
173 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
174 Don't skip over '*', just record it.
175 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
176 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
177 (vif_opcodes): Likewise.
178 (state_vif_{mpg,unpack}loc_star_p): New static locals.
179 (vif_macros,vif_macro_count): New globals.
180 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
181 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
182 (vif_get_wl_cl): New function.
183 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
186 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
188 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
189 default m68k variant to recognize.
191 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
192 (ctrl, cobr, mem, ea): Likewise.
193 (print_addr): Likewise. Remove cast.
194 (ea): Cast argument of print_addr to bfd_vma.
196 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
198 (cgen_parse_unsigned_integer): Likewise.
199 (cgen_parse_address): Likewise.
201 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
203 * i960-dis.c (ctrl): Add full braces to structure initialization.
204 (cobr, mem, reg): Likewise.
205 (ea): Correct parenthesization in expression.
207 * cgen-asm.c: Include <ctype.h>.
208 (build_asm_hash_table): Remove unused local variable i.
209 (cgen_parse_keyword): Add casts to avoid warnings.
211 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
212 symbol. Fix indentation.
213 (print_insn_little_arm): Likewise.
216 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
218 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
223 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
225 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
230 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
232 * dvp-opc.c (vif_operand_datalen_special): New global.
236 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
238 * vu0.h (vcallms): Use 'O' for call target operand.
239 * mips-dis.c (print_insn_arg): Handle 'O'.
242 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
244 * configure.in: Use AM_DISABLE_SHARED.
245 * aclocal.m4, configure: Rebuild with libtool 1.2.
248 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
250 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
255 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
257 These patches are courtesy of Jonathan Walton and Tony Thompson
258 (athompso@cambridge.arm.com).
260 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
263 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
264 both the offset and the label closest to the destination.
267 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
269 * vu0.h: New file with cop2/vu0 instructions.
270 * mips-opc.c: Include vu0.h.
271 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
273 (print_insn_mips): Do not emit a tab after an instruction if the
274 first arg is an instruction completer (&). If the next arg is an
275 escape character (%), then print the next arg verbatim.
276 * Makefile.am (mips-opc.lo): Depend on vu0.h
280 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
282 * dvp-opc.c (vif_opcodes): Add stcycl.
284 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
286 * dvp-dis.c (print_dma): Change length from 16 to 8.
289 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
291 * m32r-opc.h: Regenerate.
294 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
296 * dvp-opc.c (print_dest1): Print dest spec again.
297 (print_vfreg,print_accdest): Likewise.
298 (vif_unpack_len): Round result up to word boundary.
301 start-sanitize-vr4320
302 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
304 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
306 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
308 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
313 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
315 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
316 (print_insn): Do mask comparison on proper opcode word.
317 Print unsigned values in hex.
318 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
319 (parse_bc): Catch missing dest.
320 (parse_vfreg): Replace atoi call with strtol.
321 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
322 (parse_bcftreg,parse_ffstreg): Handle missing dest.
323 (extract_gif_eop): New function.
324 (gif_operands): Update eop entry.
325 (VGIFOP,VGIFNREGS): Fix calcs.
326 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
327 (gif_regs): Add entry for unused 11 case.
328 (print_gif_regs): Print empty list instead of nothing.
329 (extract_gif_nloop): Fix value calc.
330 (print_gif_nloop): Always print value, even if 0.
331 (insert_vif_wlcl,extract_vif_wlcl): New functions.
332 (vif_operands): Use them for wl,cl fields.
333 (state_vif_wl,state_vif_cl): New static locals.
334 (parse_vif_mode): Handle numeric args.
335 (vif_unpack_len_value,vif_unpack_len): New functions.
336 (vif_insn_len): Call vif_unpack_len.
339 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
341 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
343 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
345 * cgen-asm.in: Move insertion of generated routines to top of file.
346 (insert_normal): Add prototype. Delete `shift' arg.
347 * cgen-dis.in: Move insertion of generated routines to top of file.
348 (extract_normal): Add prototype. Delete `shift' arg.
349 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
350 (print_keyword): Add prototype. Fix type of `attrs' arg.
352 start-sanitize-vr4320
353 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
355 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
356 * mips-opc.c ("mac","dmac") : Added 4320 insns.
359 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
361 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
362 assume that info->symbols is non-empty.
364 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
366 * alpha-opc.c (cvtqs) There is no such thing.
367 (cvttq): Missing most of the /*d variants.
370 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
372 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
374 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
375 (r5900/msub.s): Takes three operands, not four. Fix opcode.
379 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
381 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
382 delayed branches or jumps.
386 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
388 * dvp-opc.c (vif_operands): Add unpack[u] support.
389 (vif_opcodes): Ditto.
390 (*_vif_imrubits): Renamed from *_vif_imrbits.
392 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
394 * dvp-dis.c (print_insn): Handle word number.
395 Handle mips address vs vu address.
396 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
397 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
398 ({insert,extract}_dma_addr): Fix word ofset.
399 ({insert,print}_gif_regs): Fix encode/decode.
402 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
404 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
406 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
407 * tic30-dis.c (print_branch): Likewise.
409 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
410 * dvp-dis.c (dvp_info_mach_type): New function.
411 (print_insn_dvp): Call it.
412 (print_vif): Return length of 4 if mpg or direct insn so following
413 insns get properly disabled.
414 (print_gif): Fix word order.
415 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
416 (gif_operands): Fix word order.
417 (gif_opcodes): Likewise.
418 ({insert,extract,print}_gif_regs): Likewise.
419 (gif_regs): Add new register number/name changes.
420 (dma_opcodes): Add dmarefe insn.
423 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
425 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
426 saved_symbol code as it is no longer needed.
428 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
430 * cgen-asm.c: Include symcat.h.
431 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
433 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
436 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
438 * dvp-opc.c (extra_dma_flags): Fix typos.
439 (dma_operands): Fix word numbers.
440 (dma_opcodes): Likewise.
441 ({insert,extract}_dma_flags): Likewise.
444 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
446 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
449 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
451 * dvp-dis.c (print_gif): Complete.
452 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
453 (state_gif_{nregs,regs,nloop}): New static locals.
455 (dvp_opcode_init_{parse,print}): Init gif state locals.
456 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
457 (vif_insn_len): Handle `unpack'.
458 ({insert,extract}_dma_flags): Complete.
462 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
464 * mips-opc.c (mula.s): Renamed from multa.s.
467 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
469 * m32r-opc.[ch]: Regenerate.
472 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
474 * dvp-opc.c (dma_operands): Rewrite.
475 (dma_operand_{count,addr}): New globals.
476 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
477 (insert_dma_addr): Insert value into insn.
478 (extract_dma_addr): Extract value from insn.
480 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
482 * dvp-dis.c (print_vu): Handle loi insns.
483 (print_insn): Likewise.
484 * dvp-opc.c (vu_lower_opcodes): Add "loi".
485 (vu_operands): Make LDEST1 a FAKE operand.
486 (parse_dest1): Allow elided argument.
487 (print_dest1): Don't print the argument.
489 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
491 * dvp-opc.c (parse_vfreg): Dest spec is optional.
492 (print_vfreg): Don't print dest spec.
493 (parse_accdest): Dest spec is optional.
494 (print_accdest): Don't print dest spec.
497 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
499 * Makefile.am (CGENFILES): Update.
500 * Makefile.in: Regenerate.
501 * cgen-asm.in (insert_normal): Result is error message now.
502 Validate value to be inserted.
503 (insert_insn_normal): Result is error message now.
504 (@arch@_cgen_assemble_insn): Update.
505 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
506 arguments. Don't perform validation here.
507 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
509 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
511 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
512 operand instance list.
513 * m32r-opc.c: Regenerate.
515 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
517 * Makefile.am (AUTOMAKE_OPTIONS): Define.
518 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
520 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
522 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
524 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
526 * configure.in: Get the version number from BFD.
527 * configure: Rebuild.
529 From H.J. Lu <hjl@gnu.org>:
530 * Makefile.am (libopcodes_la_LDFLAGS): Define.
531 * Makefile.in: Rebuild.
533 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
535 * m32r-opc.c: Regenerate.
536 * m32r-opc.h: Regenerate.
538 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
540 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
541 Ignore ALIAS insns if asked to.
542 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
543 * m32r-opc.c: Regenerate.
546 * dvp.opc.c: Nicely format opcode tables.
547 (vu_operands): New element UFLAGS.
548 (parse_uflags,print_uflags): New functions.
549 (vu_upper_opcodes): Add UFLAGS to all insns.
552 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
554 Fix rac to accept only a0:
555 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
556 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
557 Introduce OPERAND_GPR.
558 * d10v-dis.c (print_operand): Likewise.
560 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
562 * cgen-opc.in: New file.
563 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
564 * Makefile.am (CGENFILES): Add cgen-opc.in.
565 * Makefile.in: Regenerate.
567 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
568 (cgen_hw_lookup): Make result const.
570 * cgen-dis.in (*): Use PTR instead of void *.
571 (print_insn): Delete unused vars `i', `syntax'.
573 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
576 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
578 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
579 (vif_opcodes): Update renamed insns.
580 * dvp-dis.c (*): Likewise.
583 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
585 * configure, aclocal.m4: Rebuild with new libtool.
588 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
590 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
591 instructions use a PC relative branch, not absolute.
594 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
596 * configure.in: Set libtool_enable_shared rather than
597 libtool_shared. Remove diversion hack.
598 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
600 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
602 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
603 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
605 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
607 * tic30-dis.c: New file.
608 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
609 * configure.in: Handle bfd_tic30_arch.
610 * Makefile.am: Rebuild dependencies.
611 (CFILES): Add tic30-dis.c
612 (ALL_MACHINES): Add tic30-dis.lo.
613 * configure, Makefile.in: Rebuild.
616 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
618 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
619 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
620 macwhi-a and macwlo-a instructions.
624 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
626 * dvp-opc.c, fixed encoding of a bunch of instructions to
627 be consistent with the asmvu assembler (and inconsistent
628 with the specification).
630 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
632 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
633 in the opcode table. The pkemscalf instruction must come first.
635 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
637 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
640 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
642 * m32r-opc.h (HAVE_CPU_M32R): Define.
645 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
647 * dvp-dis.c, dvp-opc.c: New files.
648 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
649 * configure: Regenerate.
650 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
651 (dvp-dis.lo,dvp-opc.lo): Add rules for.
652 (mips-dis.lo): Compile with @archdefs@.
653 * Makefile.in: Regenerate.
654 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
655 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
658 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
660 * v850-opc.c (insertion routines): If both alignment and size is
661 wrong then report this.
663 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
665 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
666 Only recognize instructions for the current target_processor.
668 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
670 * d10v-dis.c (PC_MASK): Correct value.
671 (print_operand): If there's a reloc, don't calculate the
672 address because they could be in different sections.
674 start-sanitize-cygnus
675 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
677 * cgen.sh: Rewrite to be like simulator's version.
678 * Makefile.am (cgen): Update call to cgen.sh.
679 * Makefile.in: Regenerate
682 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
684 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
685 instruction after the 4650's "mul" instruction; nobody's using the
686 4010 these days. If object files someday indicate which processor
687 variant they're intended for, we can do a better job at this.
690 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
692 * mips-opc.c (c.lt.s): Add r5900 variant.
696 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
698 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
699 table provided entry size. Use CGEN_INSN_MNEMONIC.
700 (cgen_parse_keyword): Rewrite.
701 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
702 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
703 * cgen-opc.c: Clean up pass over `struct foo' usage.
704 (cgen_keyword_lookup_value): Handle "" entry.
705 (cgen_keyword_add): Likewise.
706 start-sanitize-cygnus
707 * Makefile.am: Add cgen support.
708 * Makefile.in: Regenerate.
709 * configure.in: Add cgen support.
710 * configure: Regenerate.
711 * aclocal.m4: Regenerate.
712 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
715 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
717 * mips-opc.c: Add FP_D to s.d instruction flags.
719 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
721 * m68k-opc.c (halt, pulse): Enable them on the 68060.
724 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
726 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
727 PC relative offset forms before the 15 bit forms. An assembler command
728 line option now chooses the default.
732 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
734 * mips-opc.c: Add many missing r5900 instructions.
738 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
740 * d30v-opc.c (d30v_opcode_table): Set new flags bits
741 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
744 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
746 * configure: Only build libopcodes shared if --enable-shared's value
747 was `yes', or was set to `*opcodes*'.
748 * aclocal.m4: Likewise.
749 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
750 original source of this bit of code. It's not clear what the best fix
754 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
756 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
759 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
761 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
762 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
763 offset forms before the 15 bit forms, to default to the long forms.
766 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
768 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
770 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
772 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
773 symbol if none is present.
774 (print_insn_big_arm): Prevent examination of stored symbol if
777 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
779 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
781 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
783 * disassemble.c: Remove disasm_symaddr() function.
785 * arm-dis.c: Use info->symbol instead of info->flags to determine
786 if disassmbly should be in Thumb or Arm mode.
788 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
790 * arm-dis.c: Add support for disassembling Thumb opcodes.
791 (print_insn_thumb): New function.
793 * disassemble.c (disasm_symaddr): New function.
795 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
796 (thumb_opcodes): Table of Thumb opcodes.
798 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
800 * m68k-opc.c (btst): Change Dd@s to Dd;b.
802 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
803 and 'v' as operand types.
805 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
807 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
808 <olivier.carmona@di.epfl.ch>.
809 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
810 which has a two word opcode with a one word argument.
813 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
815 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
816 unsigned, not signed.
817 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
820 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
822 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
823 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
824 (ftrv): Slay the cut-and-paste monster.
826 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
828 * d10v-dis.c (print_operand):
829 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
831 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
833 * d10v-opc.c (OPERAND_FLAG): Split into:
834 (OPERAND_FFLAG, OPERAND_CFLAG) .
838 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
840 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
841 field for all INSN_MACRO's.
844 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
846 * mips-opc.c (sync,cache): These are 3900 insns.
848 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
850 sh-opc.h (sh_table): Remove ftst/nan.
852 start-sanitize-vr5400
853 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
855 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
856 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
858 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
862 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
864 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
865 Add tx49 insns and configury.
868 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
870 * mips-opc.c (ffc, ffs): Fix mask.
873 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
875 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
879 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
881 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
882 start-sanitize-vr5400
883 Added VR5400 instructions.
884 (N5): New cpu-id macro.
886 (WR_HILO, RD_HILO, MOD_HILO): New macros.
888 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
890 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
891 (WR_HILO, RD_HILO, MOD_HILO): New macros.
893 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
895 * v850-dis.c (disassemble): Replace // with /* ... */
897 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
899 * sparc-opc.c: Add wr & rd for v9a asr's.
900 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
901 (v9a_asr_reg_names): New variable.
902 Patch from David Miller <davem@vger.rutgers.edu>.
904 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
906 * sparc-opc.c (v9notv9a): New insn type.
907 (IMPDEP): Move to the end to not conflict with edge8 et al.
908 Patch from David Miller <davem@vger.rutgers.edu>.
910 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
912 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
914 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
916 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
918 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
920 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
921 of disassemble_info structure to determine if an overlay address
922 has a matching symbol in low memory.
924 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
925 new symbol_at_address_func field in disassemble_info structure.
927 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
929 * v850-opc.c (extract_d22): Use signed arithmatic.
931 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
933 * mips-opc.c: Three op mult is not an ISA insn.
935 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
937 * mips-opc.c: Fix formatting.
939 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
941 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
942 than assuming that char is signed. Explicitly sign extend 16 bit
943 values, rather than assuming that short is 16 bits.
944 (OP_sI, OP_J, OP_DIR): Likewise.
947 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
949 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
953 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
955 * v850-opc.c: Fix typo in comment.
957 * v850-dis.c (disassemble): Add test of processor type when
960 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
962 * configure.in: Use a diversion to set enable_shared before the
963 arguments are parsed.
964 * configure: Rebuild.
966 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
968 * m68k-opc.c (TBL1): Use ! rather than `.
969 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
971 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
973 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
975 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
977 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
980 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
981 * aclocal.m4: Rebuild with new libtool.
982 * configure: Rebuild.
985 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
987 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
990 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
992 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
994 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
996 * v850-opc.c (v850_opcodes): Further rearrangements.
999 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1001 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1004 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1006 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1009 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1011 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1013 * mips16-opc.c: Added mips16 sdbbp.
1016 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1018 * v850-opc.c: Initialise processors field of v850_opcode structure.
1021 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1023 Merge changes from Martin Hunt:
1025 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1027 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1028 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1029 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1031 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1033 * d30v-dis.c (print_insn): First operand of d*i (delayed
1034 branch) instructions is relative.
1036 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1037 (d30v_operand_table): Add IMM6S3 type.
1038 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1040 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1041 and cmp instructions.
1043 * d30v-opc.c: Correct entries for repeat*, and sat*.
1044 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1045 types. Correct several formats.
1047 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1049 * d30v-opc.c (pre_defined_registers): Change control registers.
1051 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1052 SHORT_C2. Manual was incorrect.
1054 * d30v-dis.c (lookup_opcode): Return value now indicates
1055 if an opcode has a short and a long form. Used for deciding
1056 to append a ".s" or ".l".
1057 (print_insn): Append a ".s" to an instruction if it is
1058 the short form and ".l" if it is a long form. Do not append
1059 anything if the instruction has only one possible size.
1061 * d30v-opc.c: Change mulx2h to require an even register.
1062 New form: SHORT_A2; a SHORT_A form that needs an even
1063 register as the first operand.
1065 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1066 instruction was not being disassembled if there were an odd
1067 number of instructions.
1069 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1072 start-sanitize-v850e
1073 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1075 * v850-dis.c (disassemble): Improved display of register lists.
1078 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1080 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1081 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1082 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1083 fandnot1s, fandnot2s.
1085 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1087 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1089 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1091 * cgen-asm.c (cgen_parse_address): New argument resultp.
1092 All callers updated.
1093 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1095 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1097 * mn10200-dis.c (disassemble): PC relative instructions are
1098 relative to the next instruction, not the current instruction.
1100 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1102 * v850-dis.c (disassemble): Only signed extend values that are not
1103 returned by extract functions.
1104 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1106 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1108 * v850-opc.c: Update comments. Remove use of
1109 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1111 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1113 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1115 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1117 * configure: Rebuilt with latest devo autoconf for NT support.
1119 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1121 * v850-dis.c (disassemble): Use curly brace syntax for register
1124 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1125 where r0 is being used as a destination register.
1127 start-sanitize-v850e
1128 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1130 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1133 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1135 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1136 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1137 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1138 Add insns to access SGR and DBR.
1139 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1141 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1143 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1145 start-sanitize-v850e
1146 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1148 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1149 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1152 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1154 * configure (cgen_files): Add support for v850e target.
1155 * configure.in (cgen_files): Add support for v850e target.
1157 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1159 * configure (cgen_files): Add support for v850ea target.
1160 * configure.in (cgen_files): Add support for v850ea target.
1163 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1165 * configure.in (bfd_arc_arch): Add.
1166 * configure: Rebuild.
1167 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1168 * Makefile.in: Rebuild.
1169 * arc-dis.c, arc-opc.c: New files.
1170 * disassemble.c (ARCH_all): Define ARCH_arc.
1171 (disassembler): Add ARC support.
1173 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1175 start-sanitize-v850e
1176 * v850-dis.c (disassemble): Add support for v850EA instructions.
1178 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1179 (v850_opcodes): Add v850EA instructions.
1181 * v850-dis.c (disassemble): Add support for v850E instructions.
1183 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1184 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1185 insert_spe, extract_spe): New Functions.
1186 (v850_opcodes): Add v850E instructions.
1189 * v850-opc.c: Reorganised and re-layed out to improve readability
1192 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1194 * configure: Rebuild with autoconf 2.12.1.
1196 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1198 * aclocal.m4, configure: Rebuild with new automake patches.
1200 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1202 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1203 * acinclude.m4: Just include acinclude.m4 from BFD.
1204 * aclocal.m4, configure: Rebuild.
1206 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1208 * Makefile.am: New file, based on old Makefile.in.
1209 * acconfig.h: New file.
1210 * acinclude.m4: New file.
1211 * stamp-h.in: New file.
1212 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1213 Removed shared library handling; now handled by libtool. Replace
1214 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1215 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1216 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1217 handling in AC_OUTPUT.
1218 * dep-in.sed: Change .o to .lo.
1219 * Makefile.in: Now built with automake.
1220 * aclocal.m4: Now built with aclocal.
1221 * config.in, configure: Rebuild.
1223 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1225 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1227 start-sanitize-r5900
1228 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1230 * mips-opc.c: Fix coding of mtsa.
1233 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1235 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1237 * sparc-dis.c (sorted_opcodes): New static local.
1238 (struct opcode_hash): `opcode' is pointer to const element.
1239 (build_hash): First arg is now table of sorted pointers.
1240 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1241 (compare_opcodes): Update.
1243 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1245 * cgen-opc.c: #include <ctype.h>.
1246 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1247 Handle case insensitive hashing.
1248 (hash_keyword_value): Change type of `value' to unsigned int.
1250 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1252 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1253 precision FP, mark it as such. Likewise for double precision
1254 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1256 start-sanitize-r5900
1257 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1260 start-sanitize-r5900
1261 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1263 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1264 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1267 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1269 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1271 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1272 nesting depth when all the macros are expanded.
1274 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1276 * sparc-opc.c: The fcmp v9a instructions take an integer register
1277 as a destination, not a floating point register. From Christian
1278 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1280 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1282 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1283 syntax. From Roman Hodek
1284 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1286 * i386-dis.c (twobyte_has_modrm): Fix pand.
1288 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1290 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1292 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1294 * arm-dis.c: Add prototypes for arm_decode_shift and
1297 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1299 * mips-opc.c: Add r3900 insns.
1301 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1303 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1304 print delay slot instructions on the same line. When using a PC
1305 relative load, add a comment with the value being loaded if it can
1308 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1310 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1311 to pushS/popS for segment regs and byte constant so that
1312 pushw/popw printed when in 16 bit data mode.
1314 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1315 print cbtw, cwtd in 16 bit data mode.
1316 * i386-dis.c (putop): extra case W to support above.
1318 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1319 address size prefix in 16 bit address mode.
1321 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1323 * sh-dis.c: Reindent. Rename local variable fprintf to
1326 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1328 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1330 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1332 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1334 * mips16-opc.c (mip16_opcodes): same.
1336 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1338 * m68k-opc.c (moveb): Change $d to %d.
1340 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1342 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1343 (twobyte_has_modrm): Likewise.
1345 (OP_MMX, OP_EM, OP_MS): New static functions.
1347 * i386-dis.c: Revert patch of April 4. The output now matches
1350 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1352 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1355 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1357 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1359 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1361 * Makefile.in (install): Depend upon installdirs.
1362 (installdirs): New target.
1364 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1366 From Thomas Graichen <graichen@rzpd.de>:
1367 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1368 * configure: Rebuild.
1370 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1372 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1373 Delete string{,s}.h support.
1375 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1377 * cgen-asm.c (cgen_parse_operand_fn): New global.
1378 (cgen_parse_{{,un}signed_integer,address}): Update call to
1379 cgen_parse_operand_fn.
1380 (cgen_init_parse_operand): New function.
1381 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1382 from cgen_asm_init_parse.
1383 (m32r_cgen_assemble_insn): New operand `errmsg'.
1384 Delete call to as_bad, return error message to caller.
1385 (m32r_cgen_asm_hash_keywords): #if 0 out.
1387 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1389 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1391 [case 'J']: Fix typo in register name.
1393 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1395 * configure.in: Substitute SHLIB_LIBS.
1396 * configure: Rebuild.
1397 * Makefile.in (SHLIB_LIBS): New variable.
1398 ($(SHLIB)): Use $(SHLIB_LIBS).
1400 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1402 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1404 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1406 * disassemble.c (disassembler): Handle m32r.
1408 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1410 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1411 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1412 * Makefile.in (CFILES): Add them.
1413 (ALL_MACHINES): Add them.
1414 (dependencies): Regenerate.
1415 * configure.in (cgen_files): New variable.
1416 (bfd_m32r_arch): Add entry.
1417 * configure: Regenerate.
1419 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1421 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1422 * configure: Rebuild.
1424 * Makefile.in: Rebuild dependencies.
1426 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1428 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1431 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1433 * Branched binutils 2.8.
1435 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1437 * m10200-dis.c: Rename from mn10200-dis.c.
1438 * m10200-opc.c: Rename from mn10200-opc.c.
1439 * m10300-dis.c: Rename from mn10300-dis.c
1440 * m10300-opc.c: Rename from mn10300-opc.c.
1441 * Makefile.in: Update accordingly.
1443 * mips16-opc.c: Add mul and dmul macros.
1445 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1447 * makefile.vms: Update CFLAGS, add clean target.
1449 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1451 * mips-opc.c: Add "wait". From Ralf Baechle
1452 <ralf@gnu.ai.mit.edu>.
1454 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1455 * configure, config.in: Rebuild.
1456 * sysdep.h: Include <stdlib.h> if it exists.
1457 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1459 * Makefile.in: Rebuild dependencies.
1461 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1463 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1464 Andrew Bray <andy@madhouse.demon.co.uk>.
1466 * mips-opc.c: Add cast when setting mips_opcodes.
1468 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1470 * v850-dis.c (disassemble): Fix sign extension problem.
1471 * v850-opc.c (extract_d*): Fix sign extension problems to make
1472 disassembly calculate branch offsets correctly.
1474 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1476 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1478 * mips-opc.c: Add dctr and dctw.
1481 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1483 * d30v-dis.c (print_insn): Change the way signed constants
1486 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1488 * Makefile.in (BFD_H): New variable.
1489 (HFILES): New variable.
1490 (CFILES): Add all C files.
1491 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1492 Delete old dependencies, and build new ones.
1493 * dep-in.sed: New file.
1495 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1497 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1499 start-sanitize-coldfire
1500 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1502 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1505 end-sanitize-coldfire
1506 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1508 * mn10200-opc.c: Change "trap" to "syscall".
1509 * mn10300-opc.c: Add new "syscall" instruction.
1511 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1513 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1514 mulul insns on the coldfire.
1516 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1518 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1519 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1520 (print_insn_little_arm): Likewise.
1522 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1524 Based on patches from H.J. Lu <hjl@lucon.org>:
1525 * i386-dis.c (fetch_data): Add prototype.
1526 * m68k-dis.c (fetch_data): Add prototype.
1527 (dummy_print_address): Add prototype. Make static.
1528 * ppc-opc.c (valid_bo): Add prototype.
1529 * sparc-dis.c (build_hash_table): Add prototype.
1530 (is_delayed_branch, compute_arch_mask): Add prototypes.
1531 (print_insn_sparc): Make several local variables const.
1532 (compare_opcodes): Change arguments to const PTR. Add prototype.
1533 * sparc-opc.c (arg): Change name field to be const.
1534 (lookup_name, lookup_value): Add prototypes. Change table and
1535 name parameters to be const.
1536 (sparc_encode_asi): Change name parameter to be const.
1537 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1538 (sparc_encode_sparclet_cpreg): Likewise.
1539 (sparc_decode_asi): Change return type to be const.
1540 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1541 (sparc_decode_sparclet_cpreg): Likewise.
1543 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1545 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1546 Solaris doesn't like the combined options, and the -f is
1548 (stamp-tshlink, install): Likewise.
1550 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1552 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1555 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1557 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1559 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1561 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1564 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1566 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1568 start-sanitize-tic80
1569 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1571 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1573 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1575 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1578 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1580 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1581 floatformat_to_double to make portable.
1582 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1585 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1587 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1588 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1590 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1592 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1593 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1595 start-sanitize-tic80
1596 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1598 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1599 (OFF_SL_BR_SCALED): ... to this, and added the flag
1600 TIC80_OPERAND_BASEREL to the flags word.
1601 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1605 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1607 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1608 Change mips_opcodes from const array to a pointer,
1609 and change bfd_mips_num_opcodes from const int to int,
1610 so that we can increase the size of the mips opcodes table
1613 start-sanitize-tic80
1614 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1616 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1617 store BITNUM values in the table in one's complement form
1618 to match behavior when assembler is given a raw numeric
1619 value for a BITNUM operand.
1620 * tic80-dis.c (print_operand_bitnum): Ditto.
1624 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1626 * d30v-opc.c: Removed references to FLAG_X.
1629 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1631 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1634 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1636 * Makefile.in: Added d30v object files.
1637 * configure: (bfd_d30v_arch) Rebuilt.
1638 * configure.in: (bfd_d30v_arch) Added new case.
1639 * d30v-dis.c: New file.
1640 * d30v-opc.c: New file.
1641 * disassemble.c (disassembler) Add entry for d30v.
1644 start-sanitize-tic80
1645 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1647 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1648 representations for the floating point BITNUM values.
1650 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1652 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1653 in the table in one's complement form, as they appear in the
1655 (tic80_symbol_to_value): Use macros to access predefined
1657 (tic80_value_to_symbol): Ditto.
1658 (tic80_next_predefined_symbol): New function.
1659 * tic80-dis.c (print_operand_bitnum): Remove code that did
1660 one's complement for BITNUM values.
1663 start-sanitize-r5900
1664 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1666 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1669 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1671 * makefile.vms: Remove 8 bit characters. Update to latest
1674 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1676 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1678 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1680 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1681 (IMM24_PCREL): Likewise.
1683 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1685 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1686 address for an extended PC relative instruction that is not a
1689 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1691 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1694 start-sanitize-tic80
1695 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1697 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1698 (tic80_opcodes): Sort entries so that long immediate forms
1699 come after short immediate forms, making it easier for
1700 assembler to select the right one for a given operand.
1703 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1705 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1707 (print_insn_mips16): Likewise.
1709 start-sanitize-r5900
1710 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1712 * mips-opc.c: add r5900.
1715 start-sanitize-tic80
1716 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1718 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1719 a symbol class that restricts translation to just that
1720 class (general register, condition code, etc).
1722 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1724 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1725 and REG_DEST_E for register operands that have to be
1726 an even numbered register. Add REG_FPA for operands that
1727 are one of the floating point accumulator registers.
1728 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1729 (tic80_opcodes): Change entries that need even numbered
1730 register operands to use the new operand table entries.
1731 Add "or" entries that are identical to "or.tt" entries.
1734 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1736 * mips16-opc.c: Add new cases of exit instruction for
1738 * mips-dis.c (print_mips16_insn_arg): Display floating point
1739 registers in operands of exit instruction. Print `$' before
1740 register names in operands of entry and exit instructions.
1742 start-sanitize-tic80
1743 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1745 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1746 pairs for all predefined symbols recognized by the assembler.
1747 Also used by the disassembling routines.
1748 (tic80_symbol_to_value): New function.
1749 (tic80_value_to_symbol): New function.
1750 * tic80-dis.c (print_operand_control_register,
1751 print_operand_condition_code, print_operand_bitnum):
1752 Remove private tables and use tic80_value_to_symbol function.
1755 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1757 * d10v-dis.c (print_operand): Change address printing
1758 to correctly handle PC wrapping. Fixes PR11490.
1760 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1762 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1765 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1767 * mips-dis.c (print_insn_mips16): Set insn_info information.
1768 (print_mips16_insn_arg): Likewise.
1770 * mips-dis.c (print_insn_mips16): Better handling of an extend
1771 opcode followed by an instruction which can not be extended.
1773 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1775 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1776 coldfire moveb instruction to not allow an address register as
1777 destination. Although the documentation does not indicate that
1778 this is invalid, experiments uncovered unexpected behavior.
1779 Added a comment explaining the situation. Thanks to Andreas
1780 Schwab for pointing this out to me.
1782 start-sanitize-tic80
1783 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1785 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1786 entries are presorted so that entries with the same mnemonic are
1787 adjacent to each other in the table. Sort the entries for each
1788 instruction so that this is true.
1791 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1793 * m68k-dis.c: Include <libiberty.h>.
1794 (print_insn_m68k): Sort the opcode table on the most significant
1795 nibble of the opcode.
1797 start-sanitize-tic80
1798 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1800 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1801 "vsub", "vst", "xnor", and "xor" instructions.
1802 (V_a1): Renamed from V_a, msb of accumulator reg number.
1803 (V_a0): Add macro, lsb of accumulator reg number.
1805 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1807 * tic80-dis.c (print_insn_tic80): Broke excessively long
1808 function up into several smaller ones and arranged for
1809 the instruction printing function to be callable recursively
1810 to print vector instructions that have both a load and a
1811 math instruction packed into a single opcode.
1812 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1813 to explain why it comes after the other vector opcodes.
1816 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1818 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1819 move insns to handle immediate operands.
1821 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1823 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1824 fix operand mask in the "moveml" entries for the coldfire.
1826 start-sanitize-tic80
1827 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1829 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1830 New macros for building vector instruction opcodes.
1831 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1832 FMT_LI, which were unused. The field is now a flags field.
1833 Remove some opcodes that are possible, but illegal, such
1834 as long immediate instructions with doubles for immediate
1835 values. Add "vadd" and "vld" instructions.
1837 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1839 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1840 the order more logical. Move the shift alias instructions ("rotl",
1841 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1842 interspersed with the regular sr.x and sl.x instructions. Add
1843 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1844 "sub", "subu", "swcr", and "trap".
1846 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1848 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1849 (OFF_SL_PC): Renamed from OFF_SL.
1850 (OFF_SS_BR): New operand type for base relative operand.
1851 (OFF_SL_BR): New operand type for base relative operand.
1852 (REG_BASE): New operand type for base register operand.
1853 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1854 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1855 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1857 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1858 10 char field, padded with spaces on rhs, rather than a string
1859 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1860 than old TIC80_OPERAND_RELATIVE. Add support for new
1861 TIC80_OPERAND_BASEREL flag bit.
1863 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1865 * tic80-dis.c (print_insn_tic80): Print floating point operands
1867 * tic80-opc.c (SPFI): Add single precision floating point
1868 immediate operand type.
1869 (ROTATE): Add rotate operand type for shifts.
1870 (ENDMASK): Add for shifts.
1871 (n): Macro for the 'n' bit.
1872 (i): Macro for the 'i' bit.
1873 (PD): Macro for the 'PD' field.
1874 (P2): Macro for the 'P2' field.
1875 (P1): Macro for the 'P1' field.
1876 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1880 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1882 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1883 adding in current address for pc-relative operands.
1885 start-sanitize-tic80
1886 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1888 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1889 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1890 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1891 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1892 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1893 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1894 (REG_SCALED, LSI_SCALED): New operand types.
1895 (E): New macro for 'E' bit at bit 27.
1896 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1897 opcodes, including the various size flavors (b,h,w,d) for
1898 the direct load and store instructions.
1900 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1902 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1904 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1905 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1906 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1907 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1908 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1909 masks with "MASK_* & ~M_*" to get the M bit reset.
1910 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1912 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1914 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1915 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1916 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1918 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1919 CC, SICR, and LICR table entries.
1920 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1921 "bcnd", and "brcr" opcodes.
1924 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1926 * ppc-opc.c (powerpc_operands): Make comment match the
1927 actual fields (no shift field).
1928 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1929 start-sanitize-tic80
1930 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1931 partial implementation, work in progress.
1932 * tic80-opc.c (tic80_operands): Begin construction operands table.
1933 (tic80_opcodes): Continue populating opcodes table and start
1934 filling in the operand indices.
1935 (tic80_num_opcodes): Add this.
1938 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1940 * m68k-opc.c: Add #B case for moveq.
1942 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1944 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1945 before they are used.
1947 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1949 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1950 for "breakpoint" instruction.
1952 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1954 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1955 (dep): Use ALL_CFLAGS rather than CFLAGS.
1957 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1959 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1962 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1964 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1965 start-sanitize-tic80
1966 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1969 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1971 * mips16-opc.c: Add "abs".
1973 start-sanitize-tic80
1974 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1976 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1977 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1978 (disassembler): Add bfd_arch_tic80 support to set disassemble
1979 to print_insn_tic80.
1980 * tic80-dis.c (print_insn_tic80): Add stub.
1982 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1984 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1985 * configure: Regenerate with autoconf.
1986 * tic80-dis.c: Add file.
1987 * tic80-opc.c: Add file.
1990 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1992 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1994 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1996 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1997 (mn10200_opcodes): Use it for some logicals and btst insns.
1998 Add "break" and "trap" instructions.
2000 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2002 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2004 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2006 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2007 relative load or add now depends upon whether the instruction is
2010 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2012 * mn10200-dis.c: Finish writing disassembler.
2013 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2014 Fix mask for "jmp (an)".
2016 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2017 handle endianness issues for mn10300.
2019 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2021 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2023 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2024 instruction. Fix opcode field for "movb (imm24),dn".
2026 * mn10200-opc.c (mn10200_operands): Fix insertion position
2029 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2031 * mn10200-opc.c: Create mn10200 opcode table.
2032 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2033 but moving along nicely.
2035 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2037 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2039 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2041 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2042 specifiers for fmovem* instructions.
2044 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2046 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2048 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2050 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2053 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2055 * mn10300-opc.c: Add some comments explaining the various
2058 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2060 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2062 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2065 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2066 operand specifiers in fmovm* instructions.
2068 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2070 * ppc-opc.c (insert_li): Give an error if the offset has the two
2071 least significant bits set.
2073 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2075 * mips-dis.c (print_insn_mips16): Separate the instruction from
2076 the arguments with a tab, not a space.
2078 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2080 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2083 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2086 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2088 * configure: Rebuild with autoconf 2.12.
2090 Add support for mips16 (16 bit MIPS implementation):
2091 * mips16-opc.c: New file.
2092 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2093 (mips16_reg_names): New static array.
2094 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2095 after seeing a 16 bit symbol.
2096 (print_insn_little_mips): Likewise.
2097 (print_insn_mips16): New static function.
2098 (print_mips16_insn_arg): New static function.
2099 * mips-opc.c: Add jalx instruction.
2100 * Makefile.in (mips16-opc.o): New target.
2101 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2102 * configure: Rebuild.
2104 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2106 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2107 operand specifiers in *save, *restore and movem* instructions.
2109 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2112 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2113 register operands for immediate arithmetic, not, neg, negx, and
2114 set according to condition instructions.
2116 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2117 specifier of the effective-address operand in immediate forms of
2118 arithmetic instructions. The specifier for the immediate operand
2119 notes how and where the constant will be stored.
2121 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2123 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2126 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2129 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2131 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2133 * mn10300-dis.c (disassemble): Handle register lists.
2135 * mn10300-opc.c: Fix handling of register list operand for
2136 "call", "ret", and "rets" instructions.
2138 * mn10300-dis.c (disassemble): Print PC-relative and memory
2139 addresses symbolically if possible.
2140 * mn10300-opc.c: Distinguish between absolute memory addresses,
2141 pc-relative offsets & random immediates.
2143 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2145 (disassemble): Handle SPLIT and EXTENDED operands.
2147 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2149 * mn10300-dis.c: Rough cut at printing some operands.
2151 * mn10300-dis.c: Start working on disassembler support.
2152 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2154 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2156 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2158 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2160 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2162 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2164 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2165 register argument is calls and jmp instructions.
2167 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2169 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2170 getx operand. Fix opcode for mulqu imm,dn.
2172 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2174 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2175 in MN10300_OPERAND_SPLIT operands for how many bits
2176 appear in the basic insn word. Add IMM32_HIGH24,
2177 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2178 (mn10300_opcodes): Use new operands as needed.
2180 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2181 for bset, bclr, btst instructions.
2182 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2184 * mn10300-opc.c (mn10300_operands): Remove many redundant
2185 operands. Update opcode table as appropriate.
2186 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2187 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2189 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2191 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2192 operands (for indexed load/stores). Fix bitpos for DI
2193 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2194 few instructions that insert immediates/displacements in the
2195 middle of the instruction. Add IMM8E for 8 bit immediate in
2196 the extended part of an instruction.
2197 (mn10300_operands): Use new opcodes as appropriate.
2199 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2201 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2202 sequential so the assembler never parallelizes it with
2205 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2207 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2208 a data/address register that appears in register field 0
2209 and register field 1.
2210 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2212 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2214 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2215 standard disassembly.
2217 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2218 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2219 Recategorize PALcode instructions.
2221 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2223 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2225 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2227 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2228 there are no operand types.
2230 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2232 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2234 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2236 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2238 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2240 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2242 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2243 and sst.w instructions.
2245 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2248 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2250 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2253 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2255 * ppc-opc.c (PPCPWR2): Define.
2256 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2259 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2261 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2262 field for movhu instruction.
2264 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2265 cast value to "long" not "signed long" to keep hpux10
2268 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2270 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2273 * mn10300-opc.c (FMT*): Remove definitions.
2275 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2276 for shift-by-register opcodes.
2278 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2279 into [AD][MN][01] for encoding the position of the register
2282 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2284 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2285 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2287 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2289 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2290 Fix various typos. Add "PAREN" operand.
2291 (MEM, MEM2): Define.
2292 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2293 operands. Fix several typos.
2295 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2298 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2300 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2301 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2303 (mn10300_opcodes): Break opcode format out into its own field.
2304 Update many operand fields to deal with signed vs unsigned
2305 issues. Fix one or two typos in the "mov" instruction
2306 opcode, mask and/or operand fields.
2308 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2310 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2311 m68851 wasn't reset.
2313 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2315 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2316 all opcodes. Very rough cut at operands for all opcodes.
2318 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2321 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2323 * mn10200-opc.c, mn10300-opc.c: New files.
2324 * mn10200-dis.c, mn10300-dis.c: New files.
2325 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2326 * disassemble.c: Break mn10x00 support into 10200 and 10300
2328 * configure.in: Likewise.
2329 * configure: Rebuilt.
2331 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2333 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2335 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2337 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2339 * disassemble (ARCH_mn10x00): Define.
2340 (disassembler): Handle bfd_arch_mn10x00.
2341 * configure.in: Recognize bfd_mn10x00_arch.
2342 * configure: Rebuilt.
2344 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2346 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2347 accordingly. Don't declare functions using op_rtn.
2349 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2351 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2352 params to be more standard.
2353 * (disassemble): Print absolute addresses and symbolic names for
2354 branch and jump targets.
2355 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2357 * (v850_opcodes): Add breakpoint insn.
2359 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2361 * m68k-opc.c: Move the fmovemx data register cases before the
2362 other cases, so that they get recognized before the data register
2363 does gets treated as a degenerate register list.
2365 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2367 * mips-opc.c: Add a case for "div" and "divu" with two registers
2368 and a destination of $0.
2370 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2372 * mips-dis.c (print_insn_arg): Add prototype.
2373 (_print_insn_mips): Ditto.
2375 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2377 * mips-dis.c (print_insn_arg): Print condition code registers as
2380 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2382 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2384 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2386 * v850-dis.c (disassemble): Make static. Provide prototype.
2388 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2390 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2393 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2395 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2396 ']' characters into the output stream.
2397 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2398 Add "memop" field to all opcodes (for the disassembler).
2399 Reorder opcodes so that "nop" comes before "mov" and "jr"
2400 comes before "jarl".
2402 * v850-dis.c (print_insn_v850): Fix typo in last change.
2404 * v850-dis.c (print_insn_v850): Properly handle disassembling
2405 a two byte insn at the end of a memory region when the memory
2406 region's size is only two byte aligned.
2408 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2410 * v850-dis.c (v850_reg_names): Define.
2411 (v850_sreg_names, v850_cc_names): Likewise.
2412 (disassemble): Very rough cut at printing operands (unformatted).
2414 * v850-opc.c (BOP_MASK): Fix.
2415 (v850_opcodes): Fix mask for jarl and jr.
2417 * v850-dis.c: New file. Skeleton for disassembler support.
2418 * Makefile.in Remove v850 references, they're not needed here.
2419 * configure.in: Add v850-dis.o when building v850 toolchains.
2420 * configure: Rebuilt.
2421 * disassemble.c (disassembler): Call v850 disassembler.
2423 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2424 (insert_d8_6, extract_d8_6): New functions.
2425 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2426 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2428 (IF4A, IF4B): Use "D7" instead of "D7S".
2429 (IF4C, IF4D): Use "D8_7" instead of "D8".
2430 (IF4E, IF4F): New. Use "D8_6".
2431 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2432 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2434 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2435 (v850_operands): Change D16 to D16_15, use special insert/extract
2436 routines. New new D16 that uses the generic insert/extract code.
2437 (IF7A, IF7B): Use D16_15.
2438 (IF7C, IF7D): New. Use D16.
2439 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2441 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2442 message. Issue an error if the branch offset is odd.
2444 * v850-opc.c: Add notes about needing special insert/extract
2445 for all the load/store insns, except "ld.b" and "st.b".
2447 * v850-opc.c (insert_d22, extract_d22): New functions.
2448 (v850_operands): Use insert_d22 and extract_d22 for
2450 (insert_d9): Fix range check.
2452 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2454 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2455 and set bits field to D9 and D22 operands.
2457 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2459 * v850-opc.c (v850_operands): Define SR2 operand.
2460 (v850_opcodes): "ldsr" uses R1,SR2.
2462 * v850-opc.c (v850_opcodes): Fix opcode specs for
2463 sld.w, sst.b, sst.h, sst.w, and nop.
2465 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2467 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2468 end of the opcode table.
2470 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2472 * d10v-opc.c (pre_defined_registers): Added register pairs,
2473 "r0-r1", "r2-r3", etc.
2475 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2477 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2478 Create I16U for an unsigned 16bit mmediate operand.
2479 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2481 * v850-opc.c (v850_operands): Define EP operand.
2482 (IF4A, IF4B, IF4C, IF4D): Use EP.
2484 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2485 with immediate operand, "movhi". Tweak "ldsr".
2487 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2488 correct. Get sld.[bhw] and sst.[bhw] closer.
2490 * v850-opc.c (v850_operands): "not" is a two byte insn
2492 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2494 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2496 * v850-opc.c (two): Get order of words correct.
2498 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2500 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2501 register source and destination operands.
2502 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2504 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2505 same thinko in "trap" opcode.
2507 * v850-opc.c (v850_opcodes): Add initializer for size field
2510 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2511 Add D8 for 8-bit unsigned field in short load/store insns.
2512 (IF4A, IF4D): These both need two registers.
2513 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2514 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2515 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2516 for "ldsr" and "stsr".
2517 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2520 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2521 short store word (sst.w).
2523 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2525 * v850-opc.c (v850_operands): Added insert and extract fields,
2526 pointers to functions that handle unusual operand encodings.
2528 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2530 * v850-opc.c (v850_opcodes): Enable "trap".
2532 * v850-opc.c (v850_opcodes): Fix order of displacement
2533 and register for "set1", "clr1", "not1", and "tst1".
2535 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2537 * v850-opc.c (v850_operands): Add "B3" support.
2538 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2541 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2543 * v850-opc.c: Close unterminated comment.
2545 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2547 * v850-opc.c (v850_operands): Add flags field.
2548 (v850_opcodes): add move opcodes.
2550 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2552 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2553 * configure: (bfd_v850v_arch) Add new case.
2554 * configure.in: (bfd_v850_arch) Add new case.
2555 * v850-opc.c: New file.
2557 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2559 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2561 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2563 * d10v-opc.c: Add additional information to the opcode
2564 table to help determinine which instructions can be done
2567 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2569 * mpw-make.sed: Update editing of include pathnames to be
2572 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2574 * arm-opc.h: Added "bx" instruction definition.
2576 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2578 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2580 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2582 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2584 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2586 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2588 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2590 * makefile.vms: Update for alpha-opc changes.
2592 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2594 * i386-dis.c (print_insn_i386): Actually return the correct value.
2595 (ONE, OP_ONE): #ifdef out; not used.
2597 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2599 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2600 Changed subi operand type to treat 0 as 16.
2602 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2604 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2607 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2609 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2610 memory transfer instructions. Add new format string entries %h and %s.
2611 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2614 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2616 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2617 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2619 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2621 * alpha-dis.c (print_insn_alpha_osf): Remove.
2622 (print_insn_alpha_vms): Remove.
2623 (print_insn_alpha): Make globally visible. Chose the register
2624 names based on info->flavour.
2625 * disassemble.c: Always return print_insn_alpha for the alpha.
2627 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2629 * d10v-dis.c (dis_long): Handle unknown opcodes.
2631 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2633 * d10v-opc.c: Changes to support signed and unsigned numbers.
2634 All instructions with the same name that have long and short forms
2635 now end in ".l" or ".s". Divs added.
2636 * d10v-dis.c: Changes to support signed and unsigned numbers.
2638 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2640 * d10v-dis.c: Change all functions to use info->print_address_func.
2642 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2644 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2645 move ccr/sr insns more strict so that the disassembler only
2646 selects them when the addressing mode is data register.
2648 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2649 * d10v-opc.c (pre_defined_registers): Declare.
2650 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2651 to pick a better name for the registers.
2653 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2655 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2656 operands for fexpand and fpmerge. From Christian Kuehnke
2657 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2659 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2661 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2662 print routine. Take new regnames and cpumask arguments.
2663 Kill the environment variable nonsense.
2664 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2665 (print_insn_alpha_vms): New function. Do VMS style regnames.
2666 * disassemble.c (disassembler): Test bfd flavour to pick
2667 between OSF and VMS routines. Default to OSF.
2669 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2671 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2672 * configure: Rebuild.
2673 * Makefile.in (install): Use @INSTALL_SHLIB@.
2675 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2677 * configure: (bfd_d10v_arch) Add new case.
2678 * configure.in: (bfd_d10v_arch) Add new case.
2679 * d10v-dis.c: New file.
2680 * d10v-opc.c: New file.
2681 * disassemble.c (disassembler) Add entry for d10v.
2683 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2685 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2686 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2688 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2690 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2691 distinguish between variants of the instruction set.
2692 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2693 distinguish between variants of the instruction set.
2695 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2697 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2698 the 8086 instruction set.
2699 * i386-dis.c: General cleanups. Make most things static. Add
2700 prototypes. Get rid of static variables aflags and dflags. Pass
2701 them as args (to almost everything).
2703 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2705 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2707 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2709 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2710 if the next arg is marked with SRC_IN_DST. Gross.
2712 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2713 we're looking for and find EXR.
2715 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2716 if we're looking for KBIT and we don't find it.
2718 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2721 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2722 3bit immediate operands.
2724 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2726 * Released binutils 2.7.
2728 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2729 <kkaempf@progis.ac-net.de>.
2731 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2733 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2735 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2737 * sparc-dis.c (print_insn_sparclite): New routine to print
2738 sparclite instructions.
2740 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2742 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2744 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2746 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2747 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2748 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2750 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2752 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2753 Use autoconf-set values.
2754 (docdir, oldincludedir): Removed.
2755 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2757 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2759 * alpha-opc.c: New file.
2760 * alpha-opc.h: Remove.
2761 * alpha-dis.c: Complete rewrite to use new opcode table.
2762 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2763 * configure: Rebuild with autoconf 2.10.
2764 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2765 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2767 (alpha-opc.o): New target.
2769 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2771 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2772 Set imm_added_to_rs1 even if the source and destination register
2775 * sparc-opc.c: Add some two operand forms of the wr instruction.
2777 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2779 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2782 * disassemble.c (disassembler): Handle H8/S.
2783 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2785 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2787 * sparc-opc.c: Add beq/teq as aliases for be/te.
2789 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2790 <sergei@msil.sps.mot.com>.
2792 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2794 * makefile.vms: New file.
2796 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2798 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2800 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2803 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2805 * i386-dis.c (OP_OFF): Call append_prefix.
2807 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2809 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2810 unsigned long to silence a warning from the Solaris PowerPC
2813 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2815 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2817 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2819 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2821 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2822 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2823 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2824 cpush, cpusha, cpull sparclet insns.
2826 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2828 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2830 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2832 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2833 Set F_FLOAT on other floating point instructions.
2835 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2837 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2839 (powerpc_opcodes): Add 860/821 specific SPRs.
2841 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2843 * configure.in: Permit --enable-shared to specify a list of
2844 directories. Set and substitute BFD_PICLIST.
2845 * configure: Rebuild.
2846 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2847 uses. Set to @BFD_PICLIST@.
2849 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2851 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2852 not "abs", which may be needed for the absolute in something
2853 like btst #0,@10:8. Print L_3 immediates separately from other
2854 immediates. Change ABSMOV reference to ABS8MEM.
2856 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2858 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2859 (current_arch_mask): New static global.
2860 (compute_arch_mask): New static function.
2861 (print_insn_sparc): Delete sparc_v9_p. New static local
2862 current_mach. Resort opcode table if current_mach changes.
2863 Generalize "insn not supported" test.
2864 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2865 Delete test for v9/!v9.
2866 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2868 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2869 (brfcx): Renamed to FBRX.
2870 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2871 coprocessor mnemonics are not supported on the sparclet).
2872 (condf): Renamed to CONDF.
2873 (SLCBCC2): Delete F_ALIAS flag.
2875 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2877 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2878 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2880 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2882 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2883 that the shared library version number is set correctly.
2885 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2887 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2888 Miles Bader <miles@gnu.ai.mit.edu>.
2889 * configure: Rebuild.
2891 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2893 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2896 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2898 * configure: Rebuild with autoconf 2.8.
2900 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2902 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2903 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2905 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2907 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2908 since they appear as targets in Makefile.in.
2909 * configure: Rebuild.
2911 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2913 * mpw-make.sed: Edit out shared library support bits.
2915 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2917 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2918 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2919 (sparc_opcodes): Add sparclet insns.
2920 (sparclet_cpreg_table): New static local.
2921 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2922 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2924 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2926 * i386-dis.c (index16): New static variable.
2927 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2929 (OP_indirE): Return result of OP_E.
2930 (OP_E): Check for 16 bit addressing mode, and disassemble
2931 correctly. Optimised 32 bit case a little. Don't print
2932 "(base,index,scale)" when sib specifies only an offset.
2934 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2936 * configure.in: Set and substitute SHLIB_DEP.
2937 * configure: Rebuild.
2938 * Makefile.in (SHLIB_DEP): New variable.
2939 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2940 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2941 COMMON_SHLIB, add them to piclist with appropriate modifications.
2942 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2943 here: just use piclist.
2945 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2947 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2948 (print_insn_sparc): Rewrite v9/not-v9 tests.
2949 (compare_opcodes): Likewise.
2950 * sparc-opc.c (MASK_<ARCH>): Define.
2951 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2952 (sparclet,v6notv9): Define.
2953 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2954 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2956 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2958 * configure.in: Call AC_PROG_CC before configure.host.
2959 * configure: Rebuild.
2961 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2963 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2965 * i386-dis.c (onebyte_has_modrm): New static array.
2966 (twobyte_has_modrm): New static array.
2967 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2969 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2971 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2974 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2976 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2979 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2981 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2982 m68010up, not just m68020up | cpu32.
2984 * Makefile.in (SONAME): New variable.
2985 ($(SHLINK)): Make a link to the transformed name, as well.
2986 (stamp-tshlink): New target.
2987 (install): Skip stamp-tshlink during install.
2989 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2991 * configure.in: Call AC_ARG_PROGRAM.
2992 * configure: Rebuild.
2993 * Makefile.in (program_transform_name): New variable.
2994 (install): Transform library name before installing it.
2996 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2998 * i960-dis.c (mem): Add HX dcinva instruction.
3000 Support for building as a shared library, based on patches from
3001 Alan Modra <alan@spri.levels.unisa.edu.au>:
3002 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3003 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3004 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3005 * configure: Rebuild.
3006 * Makefile.in (ALLLIBS): New variable.
3007 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3008 (COMMON_SHLIB, SHLINK): New variables.
3009 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3010 (STAGESTUFF): Remove variable.
3011 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3012 (stamp-piclist, piclist): New targets.
3013 ($(SHLIB), $(SHLINK)): New targets.
3014 ($(OFILES)): Depend upon stamp-picdir.
3015 (disassemble.o): Build twice if PICFLAG is set.
3016 (MOSTLYCLEAN): Add pic/*.o.
3017 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3018 (distclean): Remove pic and stamp-picdir.
3019 (install): Install shared libraries.
3020 (stamp-picdir): New target.
3022 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3024 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3025 Print unknown instruction as "unknown", rather than in hex.
3027 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3029 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3031 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3033 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3035 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3037 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3038 when necessary. From Ulrich Drepper
3039 <drepper@myware.rz.uni-karlsruhe.de>.
3041 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3043 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3044 sparc_num_opcodes. Update architecture enum values.
3045 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3046 (sparc_opcode_lookup_arch): New function.
3047 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3048 (sparc_opcodes): Add v9a shutdown insn.
3050 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3052 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3053 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3055 (print_insn_sparc64): Deleted.
3056 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3059 * sparc-opc.c (architecture_pname): Add v9a.
3061 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3063 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3064 incorrectly defined as 0x16 when it should be 0x15.
3065 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3066 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3067 excb (exception barrier) which is defined in the Alpha
3068 Architecture Handbook version 2.
3069 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3070 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3071 disassembled as or, for example.
3073 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3075 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3076 (_print_insn_mips): Change i from int to unsigned int.
3078 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3080 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3081 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3083 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3085 * i386-dis.c: Added Pentium Pro instructions.
3087 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3089 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3092 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3094 * sh-opc.h (sh_nibble_type): Added REG_B.
3095 (sh_arg_type): Added A_REG_B.
3096 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3098 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3100 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3102 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3104 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3106 * Makefile.in (distclean): Remove stamp-h. From Ronald
3107 F. Guilmette <rfg@monkeys.com>.
3109 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3111 From David Mosberger-Tang <davidm@azstarnet.com>:
3112 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3115 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3117 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3118 (sh_table): Added many SH3 opcodes.
3119 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3121 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3123 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3124 (subco,subco.): Mark this PPC, not PPCCOM.
3126 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3128 * configure: Rebuild with autoconf 2.7.
3130 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3132 * configure: Rebuild with autoconf 2.6.
3134 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3136 * configure.in: Sort list of architectures. Accept but do nothing
3137 for alliant, convex, pyramid, romp, and tahoe.
3139 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3141 * a29k-dis.c (print_special): Change num to unsigned int.
3143 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3145 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3148 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3150 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3151 * configure: Rebuilt.
3153 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3155 * configure.in: Add case for bfd_i860_arch.
3156 * configure: Rebuild.
3158 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3160 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3161 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3162 (NEXTDOUBLE): Likewise.
3163 (print_insn_m68k): Don't match fmoveml if there is more than one
3164 register in the list.
3165 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3167 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3169 * m68k-opc.c: Use #W rather than #w.
3170 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3172 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3174 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3175 and likewise for all the dbxx opcodes.
3177 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3179 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3181 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3183 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3184 the VR4100 specific instructions to the mips_opcodes structure.
3186 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3188 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3189 ugly Metrowerks bug in CW6, is fixed in CW7.
3191 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3193 * ppc-opc.c (whole file): Add flags for common/any support.
3195 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3197 * Makefile.in (BISON): Remove macro.
3198 (FLAGS_TO_PASS): Remove BISON.
3200 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3202 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3204 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3205 instructions that take no args by looking at the match mask.
3206 (print_insn_arg): Always print "%" before register names.
3207 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3208 [case '_']: Don't print "@#" before address.
3209 [case 'J']: Use "%s" as format string, not register name.
3210 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3212 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3214 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3217 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3219 From David Mosberger-Tang <davidm@azstarnet.com>
3221 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3222 (alpha_insn_set): added definitions for VAX floating point
3223 instructions (Unix compilers don't generate these, but handcoded
3224 assembly might still use them).
3226 * alpha-dis.c (print_insn_alpha): added support for disassembling
3227 the miscellaneous instructions in the Alpha instruction set.
3229 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3231 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3232 no longer create sysdep.h, sed ppc-opc.c to work around a
3233 serious Metrowerks C bug.
3234 * mpw-make.in: Remove.
3235 * mpw-make.sed: New file, used by mpw-configure to edit
3236 Makefile.in into an MPW makefile.
3238 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3240 * Makefile.in (maintainer-clean): New synonym for realclean.
3242 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3244 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3245 which use '0', '1', and '2' instead. Specify the proper size for
3246 a pmove immediate operand. Correct the pmovefd patterns to be
3247 moves to a register, not from a register.
3248 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3250 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3252 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3253 %psr, %wim, %tbr as F_NOTV9.
3255 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3257 * Makefile.in (Makefile): Just rebuild Makefile when running
3259 (config.h, stamp-h): New targets.
3260 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3261 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3262 rebuilding config.h.
3263 * configure: Rebuild.
3265 * mips-opc.c: Change unaligned loads and stores with "t,A"
3266 operands to use "t,A(b)".
3268 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3270 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3272 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3274 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3275 until 3 instead of until 2.
3277 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3279 * Makefile.in (ALL_CFLAGS): Define.
3280 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3281 (MOSTLYCLEAN): Add config.log.
3282 (distclean): Don't remove config.log.
3283 * configure.in: Substitute HDEFINES.
3284 * configure: Rebuild.
3286 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3288 * sh-opc.h (sh_arg_type): Add F_FR0.
3289 (sh_table, case fmac): Add F_FR0 as first argument.
3291 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3293 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3295 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3297 * sparc-dis.c: Remove all references to NO_V9.
3299 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3301 * aclocal.m4: Just include ../bfd/aclocal.m4.
3302 * configure: Rebuild.
3304 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3306 * sparc-dis.c (X_DISP19): Define.
3307 (print_insn, case 'G'): Use it.
3308 (print_insn, case 'L'): Sign extend displacement.
3310 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3312 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3313 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3314 host_makefile_frag or frags.
3315 * aclocal.m4: New file.
3316 * configure: Rebuild.
3317 * Makefile.in (INSTALL): Set to @INSTALL@.
3318 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3319 (INSTALL_DATA): Set to @INSTALL_DATA@.
3321 (AR_FLAGS): Set to rc rather than qc.
3322 (CC): Define as @CC@.
3323 (CFLAGS): Set to @CFLAGS@.
3324 (@host_makefile_frag@): Remove.
3325 (config.status): Remove dependency upon @frags@.
3327 * configure.in: ../bfd/config.bfd now just sets shell variables.
3328 Use them rather than looking through target Makefile fragments.
3329 * configure: Rebuild.
3331 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3333 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3335 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3337 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3338 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3341 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3342 (lookup_{name,value}): New functions.
3343 (prefetch_table): New static local.
3344 (sparc_{encode,decode}_prefetch): New functions.
3345 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3347 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3349 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3352 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3354 * sh-dis.c: Correct comment on first line of file.
3356 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3358 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3360 * sparc-opc.c (asi, membar): New static locals.
3361 (sparc_{encode,decode}_{asi,membar}): New functions.
3362 (sparc_opcodes, membar insn): Fix.
3363 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3364 Support decoding of membar masks.
3367 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3369 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3371 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3373 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3374 and likewise for the other branches. Add bhs as an alias for bcc,
3375 and likewise for the size variants. Add dbhs as an alias for
3378 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3380 * sh-opc.h (FP sts instructions): Update to match reality.
3382 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3384 * m68k-dis.c: (fpcr_names): Add % before all register names.
3385 (reg_names): Likewise.
3386 (print_insn_arg): Don't explicitly print % before register names.
3387 Add % before register names in static array names. In case 'r',
3388 print data registers as `@(Dn)', not `Dn@'. When printing a
3389 memory address, don't print @# before it.
3390 (print_indexed): Change base_disp and outer_disp from int to
3391 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3392 syntax. Sign extend 8 byte displacement correctly.
3393 (print_base): Print using MIT syntax. Print zpc when appropriate.
3394 Change parameter disp from int to bfd_vma.
3396 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3399 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3401 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3402 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3403 * sh-opc.h (sh_arg_type): Add new operand types.
3404 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3406 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3408 * Makefile.in (distclean): Remove generated file config.h.
3410 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3412 * Makefile.in (distclean): Remove generated file config.h.
3414 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3416 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3418 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3420 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3421 rather than numopcodes. Use m68k_opcodes rather than removed
3422 opcode function. Don't check F_ALIAS.
3423 (print_insn_arg): Change first parameter to be const char *.
3424 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3425 (m68k-opc.o): New target.
3426 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3427 * configure: Rebuild.
3429 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3431 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3432 (opcode_bits, opcode_hash_table): New variables.
3433 (opcodes_initialized): Renamed from opcodes_sorted.
3434 (build_hash_table): New function.
3435 (is_delayed_branch): Use hash table.
3436 (print_insn): Renamed from print_insn_sparc, made static.
3437 Build and use hash table. If !sparc64, ignore sparc64 insns,
3438 and vice-versa if sparc64.
3439 (print_insn_sparc, print_insn_sparc64): New functions.
3440 (compare_opcodes): Move sparc64 opcodes to end.
3441 Print commutative insns with constant second.
3442 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3444 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3446 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3447 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3448 avoids printing a delay slot in a delay slot.
3449 * sh-opc.h (sh_table): Fully bracket last entry.
3451 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3453 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3455 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3457 * configure.in: Get host_makefile_frag from ${srcdir}.
3459 * configure.in: Autoconfiscated. Check for string[s].h. Create
3460 config.h from config.in. Don't set up sysdep.h link.
3461 * sysdep.h: New file.
3462 * configure, config.in: New files, generated from configure.in.
3463 * Makefile.in: Updated to be processed autoconf-style.
3464 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3465 (Makefile): Depend on config.status.
3466 (config.status): New rule.
3467 * configure.bat: Update Makefile substitutions.
3469 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3471 * mips-opc.c (L1): Define.
3472 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3473 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3476 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3478 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3479 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3480 have multiple add units but only a single logical unit.
3482 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3483 shifted by 18, without any insertion or extraction function.
3484 (insert_cr, extract_cr): Remove.
3486 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3488 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3491 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3493 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3494 * sh-opc.h: Add copyright.
3496 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3498 * Makefile.in (crunch-m68k): Delete extra target accidentally
3499 checked in a while ago.
3501 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3503 * sh-opc.h (sh_table): Add SH3 support.
3505 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3507 * sh-opc.h: Added bsrf and braf.
3509 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3511 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3512 bogus [ls]fm{ea,fd} patterns.
3514 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3515 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3516 initialize it from memory. Make function static.
3517 (print_insn_{big,little}_arm): New functions.
3518 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3519 the correct endianness.
3521 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3523 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3526 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3528 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3529 17th, so that it builds again using GCC as the compiler.
3531 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3533 * mips-dis.c (print_insn_little_mips): Cast return value from
3534 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3535 expects an unsigned long, and that might be fewer words of
3536 argument storage (e.g., if bfd_vma is long long on a 32-bit
3538 (print_insn_big_mips): Likewise with bfd_getb32 value.
3539 (_print_insn_mips): Now static.
3541 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3543 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3544 gcc memory hog problem with initializer is fixed.
3546 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3548 Merge in support for Mac MPW as a host.
3549 (Old change descriptions retained for informational value.)
3551 * mpw-config.in (archname): Compute from the config.
3552 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3554 * mpw-config.in (target_arch): Compute from canonical target.
3555 (m68k, mips, powerpc, sparc): Add architectures.
3556 * mpw-make.in (disassemble.c.o): Add.
3557 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3559 * mpw-config.in (BFD_MACHINES): Set to a default value.
3560 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3562 * mpw-make.in (CSEARCH): Add extra-include to search path.
3564 * mpw-config.in (varargs.h): Don't create.
3565 (sysdep.h): Create using forward-include.
3566 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3568 * mpw-config.in: New file, MPW version of configure.in.
3569 * mpw-make.in: New file, MPW version of Makefile.in.
3571 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3573 * alpha-dis.c (print_insn_alpha): Put empty statement after
3576 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3578 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3579 (low_sign_extend): Likewise.
3580 (get_field): Delete unused function.
3581 (set_field, deposit_14, deposit_21): Likewise.
3583 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3585 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3588 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3590 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3592 * alpha-opc.h (OSF_ASMCODE): define
3593 print pal-code names as defined in App C of the
3594 Alpha Architecture Reference Manual
3596 * alpha-dis.c: cleaned up output
3597 print stylized code forms as defined in App A.4.3 of the
3598 Alpha Architecture Reference Manual
3600 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3602 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3604 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3607 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3609 * m68k-dis.c (opcode): New function. Returns address of opcode
3610 table entry given index, even if the opcode table was split to
3611 work around gcc bugs.
3612 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3614 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3615 (reg_names): Now const.
3616 (print_insn_arg): Arrays cacheFieldName and names now const.
3617 (print_indexed): Array scales now const.
3619 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3621 * ppc-opc.c: Sort recently added instructions by minor opcode
3622 number within major opcode number.
3624 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3626 * hppa-dis.c: Include libhppa.h.
3628 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3630 * mips-opc.c: Change dli to use M_DLI, and add dla.
3632 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3634 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3636 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3638 * mips-opc.c: Add r4650 mul instruction.
3640 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3642 * mips-opc.c: Add uld and usd macros for unaligned double load and
3645 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3647 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3648 mfdcr, mtdcr, icbt, iccci.
3650 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3652 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3653 signed char fields to shorts, more portable.
3655 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3657 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3658 char fields as signed chars, since they may have negative values.
3660 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3662 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3663 (mycroft@netbsd.org).
3665 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3667 From "Logg, Ed" <elogg@ea.com>:
3668 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3669 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3672 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3674 * ppc-opc.c: Changes based on patch from David Edelsohn
3675 <edelsohn@mhpcc.edu>.
3676 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3679 (insert_tbr): New static function.
3680 (extract_tbr): New static function.
3681 (XFXFXM_MASK, XFXM): Define.
3682 (XSPRBAT_MASK, XSPRG_MASK): Define.
3683 (powerpc_opcodes): Add instructions to access special registers by
3684 name. Add mtcr and mftbu.
3686 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3688 * mips-opc.c (P3): Define.
3689 (mips_opcodes): Add mad and madu.
3691 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3693 * configure.in: Add W65 support.
3694 * disassemble.c: Likewise.
3695 * w65-opc.h, w65-dis.c: New files.
3697 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3699 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3702 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3704 * mips-opc.c: Add dli as a synonym for li.
3706 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3708 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3709 print something for reserved opcode values, even if it won't
3712 * mips-dis.c (_print_insn_mips): When initializing, shift right
3713 and mask, to avoid sign extension problems on the Alpha.
3715 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3718 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3720 * sh-opc.h (mov.l gbr): Get direction right.
3721 * sh-dis.c (print_insn_shx): New function.
3722 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3723 print opcodes with right byte order.
3725 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3727 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3728 to avoid conflicts with getopt.
3730 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3732 * hppa-dis.c (print_insn_hppa): Read the instruction using
3733 bfd_getb32, so that it works on a little endian or 64 bit host.
3734 Remove unused local variable op.
3736 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3738 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3739 addu does not work correctly if -mips3.
3741 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3743 * a29k-dis.c (print_special): Add special register names defined
3744 on 29030, 29040 and 29050.
3745 (print_insn): Handle new operand type 'I'.
3747 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3749 * Makefile.in (INSTALL): Use top level install.sh script.
3751 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3753 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3754 that it works on a little endian host.
3756 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3758 * configure.in: Use ${config_shell} when running config.bfd.
3760 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3762 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3764 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3766 * a29k-dis.c (print_insn): Print the opcode.
3768 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3770 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3772 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3774 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3776 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3778 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3779 which store a value into memory.
3781 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3783 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3784 * arm-dis.c, arm-opc.h: New files.
3786 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3788 * Makefile.in (ns32k-dis.o): Add dependency.
3789 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3790 string, not as array of chars.
3792 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3794 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3796 * sparc-opc.c: Added sparclite extended FP operations, and
3797 versions of v9 impdep* instructions permitting specification of
3800 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3802 * i960-dis.c (reg_names): Now const.
3803 (struct sparse_tabent): New type, copied from array type in mem
3805 (ctrl): Local static array ctrl_tab now const.
3806 (cobr): Local static array cobr_tab now const.
3807 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3808 static variable mem_tab no longer explicitly initialized. Changed
3809 mem_init to const array of struct sparse_tabent.
3810 (reg): Local static variable reg_tab no longer explicitly
3811 initialized. Changed reg_init to const array of struct
3813 (ea): Local static array scale_tab now const.
3815 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3818 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3820 * configure.bat: the disassember needs to be enabled for
3821 "objdump -d" to work in djgpp.
3823 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3825 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3826 (invalid_float): Enabled general version, doesn't require running
3827 on ns32k host. Changed to take char* argument, and test for
3828 explicitly specified sizes, instead of using sizeof() on host CPU
3830 (INVALID_FLOAT): Cast first argument.
3831 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3832 list_P032, list_M032): Now const.
3833 (optlist, list_search): Made appropriate arguments now point to
3835 (print_insn_arg): Changed static array of one-character-string
3836 pointers into a static const array of characters; fixed sprintf
3837 statement accordingly.
3839 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3841 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3842 from distribution. A ns32k-dis.c from a previous distribution has
3843 been brought up to date and supports the new interface.
3845 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3847 * configure.in: add bfd_ns32k_arch target support.
3849 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3850 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3852 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3854 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3857 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3859 * h8300-dis.c, mips-dis.c: Don't use true and false.
3861 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3863 * configure.in: Change --with-targets to --enable-targets.
3865 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3867 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3868 opcodes to the first instruction with that opcode, to speed
3869 disassembly of large files. From ralphc@pyramid.com (Ralph
3872 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3874 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3876 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3878 * configure.bat: update to latest makefile.in
3880 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3882 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3883 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3884 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3885 slot insn is in a delay slot.
3886 * z8k-opc.h: (resflg): Fix patterns.
3887 * h8500-opc.h Fix CR insn patterns.
3889 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3891 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3892 "cmpl" before POWER versions, so that gas -many uses them.
3894 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3896 * disassemble.c: New file.
3897 * Makefile.in (OFILES): Add disassemble.o.
3898 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3899 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3900 binutils/configure.in.
3902 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3903 opcode being examined.
3905 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3907 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3908 (insert_ral, insert_ram, insert_ras): New functions.
3909 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3910 RAS for store with update.
3912 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3914 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3915 (edelsohn@npac.syr.edu).
3917 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3919 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3922 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3924 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3926 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3928 * ppc-opc.c (powerpc_operands): The signedp field has been
3929 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3930 instead. Add new operand SISIGNOPT.
3931 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3932 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3933 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3936 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3938 * i386-dis.c (struct private): Renamed to dis_private. `private'
3939 is a reserved word for dynix cc.
3941 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3943 * configure.in: Change error message to refer to bfd/config.bfd
3944 rather than bfd/configure.in.
3946 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3948 * ppc-opc.c: Define POWER2 as short alias flag.
3949 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3952 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3954 * i960-dis.c (print_insn_i960): Don't read a second word for
3955 opcodes 0, 1, 2 and 3.
3957 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3959 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3961 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3963 * m68881-ext.c: Removed; no longer used.
3964 * Makefile.in: Changed accordingly.
3966 * m68k-dis.c (ext_format_68881): Don't declare.
3967 (print_insn_m68k): If an instruction uses place 'i', it uses at
3968 least four fixed bytes.
3969 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3970 extended float, convert to double using floatformat_to_double, not
3971 ieee_extended_to_double, and fetch the data before converting it.
3973 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3975 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3976 davidj@ICSI.Berkeley.EDU (David Johnson).
3978 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3980 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3981 PowerPC uses bdnz[l][a].
3983 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3985 * dis-buf.c, i386-dis.c: Include sysdep.h.
3987 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3989 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3991 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3992 by Motorola PowerPC 601 with PPC_OPCODE_601.
3993 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3994 Disassemble Motorola PowerPC 601 instructions as well as normal
3995 PowerPC instructions.
3997 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3999 * i960-dis.c (reg, mem): Just use a static array instead of
4002 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4004 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4005 condition name index if this is for a negated condition.
4007 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4008 Floating point format for 'H' operand is backwards from normal
4009 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4010 operands (fmpyadd and fmpysub), handle bizarre register
4011 translation correctly for single precision format.
4013 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4014 or 'I' operands if the next format specifier is 'M' (fcmp
4015 condition completer).
4017 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4019 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4020 single number giving a bitmask for the MB and ME fields of an M
4021 form instruction. Change NB to accept 32, and turn it into 0;
4022 also turn 0 into 32 when disassembling. Seperated SH from NB.
4023 (insert_mbe, extract_mbe): New functions.
4024 (insert_nb, extract_nb): New functions.
4025 (SC_MASK): Mask out SA and LK bits.
4026 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4027 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4028 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4029 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4030 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4031 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4032 (powerpc_macros): Define table of macro definitions.
4033 (powerpc_num_macros): Define.
4035 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4036 if PPC_OPERAND_NEXT is set.
4038 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4040 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4041 char. Retrieve contents using bfd_getl32 instead of shifting.
4043 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4045 * ppc-opc.c: New file. Opcode table for PowerPC, including
4046 opcodes for POWER (RS/6000).
4047 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4048 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4049 (CFILES): Add ppc-dis.c.
4050 (ppc-dis.o, ppc-opc.o): New targets.
4051 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4053 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4055 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4056 No space before 'u', 'f', or 'N'.
4058 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4060 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4061 farther than we should.
4063 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4065 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4067 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4069 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4071 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4072 needs it, to prevent reading past the end of a section.
4074 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4076 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4077 Removed t,A case for la; always use t,A(b) case.
4079 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4081 From Ted Lemen <mellon@pepper.ncd.com>
4082 * mips-dis.c (print_insn_arg): Handle 'k'.
4083 * mips-opc.c: Make cache use k, not t.
4085 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4087 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4088 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4089 FLOAT_FORMAT_CODE to put out floating point register names.
4091 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4093 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4095 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4097 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4099 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4101 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4102 larger than 32. Moved dsxx32 variants first for disassembler.
4104 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4106 * z8kgen.c, z8k-opc.h: Add full lda information.
4108 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4110 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4111 movb instructions. Any necessary space will be emitted by
4112 the code to handle nullification completers.
4114 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4116 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4118 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4120 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4121 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4123 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4125 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4127 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4129 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4130 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4132 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4134 * m88k-dis.c (m88kdis): comment change. Remove space after
4136 (printop): handle new arg types DEC and XREG for m88110.
4138 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4140 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4141 type for absolute branch addresses. Delete special
4142 "ble" and "be" code in 'W' operand code.
4144 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4146 * mips-opc.c: Set hazard information correctly for branch
4147 likely instructions.
4149 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4151 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4152 info->fprintf_func for printing and info->print_address_func for
4155 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4157 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4159 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4161 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4162 Corrected second case of "b" for disassembler.
4164 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4166 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4167 to BFD swapping routines to correspond to BFD name changes.
4169 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4171 * mips-opc.c: Change div machine instruction to be z,s,t rather
4172 than s,t. Change div macro to be d,v,t rather than d,s,t.
4173 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4174 rem and remu which generates only the corresponding div
4175 instruction. This is for compatibility with the MIPS assembler,
4176 which only generates the simple machine instruction when an
4177 explicit destination of $0 is used.
4178 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4180 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4182 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4183 WR_31 hazard for bal, bgezal, bltzal.
4185 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4187 * hppa-dis.c (print_insn_hppa): Use print function
4188 from within the disassemble_info, not fprintf_filtered.
4190 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4192 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4193 Law, law@cs.utah.edu.)
4195 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4197 * mips-opc.c ("absu"): Removed.
4200 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4202 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4203 Changed hazard information to distinguish between memory load
4204 delays and coprocessor load delays.
4206 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4208 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4210 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4212 * configure.in: Don't pass cpu to config.bfd.
4214 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4216 * m88k-dis.c (m88kdis): Make class unsigned.
4218 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4220 * alpha-dis.c (print_insn_alpha): One branch format case was
4221 missing the instruction name.
4223 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4225 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4226 Add the arch-specific auxiliary files.
4227 (OFILES): Remove the arch-specific auxiliary files
4228 and use BFD_MACHINES instead of DIS_LIBS.
4229 * configure.in: Set BFD_MACHINES based on --with-targets option.
4231 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4233 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4236 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4238 * sparc-opc.c: Change CONST to const to deal with gcc
4239 -Dconst=__const -traditional.
4241 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4243 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4244 coprocessor instructions out of #if 0, and made them use new
4247 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4249 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4251 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4253 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4254 instruction, for use by the disassembler.
4256 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4257 hand-coded sign extensions that depended on 32-bit host ints.
4258 FIXME, we still depend on big-endian host bitfield ordering.
4259 (sparc_print_insn): Set the insn_info_valid field, and the
4260 other fields that describe the instruction being printed.
4262 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4264 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4265 `jmp' instead of just one of them.
4267 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4269 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4270 (fput_fp_reg_r): Renamed from fput_reg_r.
4271 (fput_fp_reg): New function.
4272 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4274 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4276 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4278 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4280 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4282 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4283 don't output a space.
4285 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4287 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4289 * mips-opc.c: New file, containing opcode table from
4290 ../include/opcode/mips.h.
4291 * Makefile.in: Add it.
4293 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4295 * m88k-dis.c: New file, moved in from gdb and changed to use the
4296 new dis-asm.h disassembler interface.
4297 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4298 (m88k-dis.o): New target.
4300 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4302 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4303 argument string const char * to correspond to opcode/mips.h.
4305 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4307 * mips-dis.c: Updated to account for name changes in new version
4309 * Makefile.in: Added header file dependencies.
4311 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4313 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4315 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4317 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4318 extend, rather than shifts.
4320 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4322 * Makefile.in: Undo 15 June change.
4324 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4326 * m68k-dis.c (print_insn_arg): Change return value to byte count
4328 * m68k-dis.c: Re-write to detect invalid operands before
4329 printing anything, so we can handle this the same way we
4330 handle invalid opcodes.
4332 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4334 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4336 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4338 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4341 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4343 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4345 * configure.in: Do make sysdep.h link.
4346 * Makefile.in: Search ../include. Don't search ../bfd.
4348 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4350 Changes from Jeff Law, law@cs.utah.edu:
4351 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4352 Do not print a space before the completers specified by
4355 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4357 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4358 defined, since gdb has been fixed.
4360 Changes from Jeff Law, law@cs.utah.edu:
4361 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4362 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4363 be a *disassemble_info, not a *FILE.
4364 * hppa-dis.c: Support 'd', '!', and 'a'.
4365 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4366 * hppa-dis.c: Delete cases which are no longer needed.
4368 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4370 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4372 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4374 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4377 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4379 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4380 * configure.in: No longer need to configure to get sysdep.h.
4382 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4384 * Patches from Jeffrey Law <law@cs.utah.edu>.
4385 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4386 templates for 1.1 FP computational instructions.
4388 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4390 * h8500-dis.c (print_insn_h8500): Address argument is type
4392 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4395 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4396 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4398 * sparc-dis.c (compare_opcodes): Move static declaration to
4401 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4403 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4404 instruction, remove unimp hack from 'l' argument.
4406 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4408 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4411 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4413 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4414 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4417 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4419 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4420 arrays of string pointers to 2-d arrays of chars, to save
4423 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4425 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4426 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4428 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4430 * hppa-dis.c: New file from Utah, adapted to new disassembler
4432 * Makefile.in: Include it.
4434 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4436 * sh-dis.c, sh-opc.h: New files.
4438 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4440 * alpha-dis.c, alpha-opc.h: New files.
4442 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4444 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4447 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4449 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4451 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4453 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4456 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4458 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4459 and double percent signs a few places.
4461 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4463 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4464 Use info->print_address_func not print_address.
4466 * dis-buf.c (generic_print_address): New function.
4468 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4470 * Makefile.in: Add sparc-dis.c.
4471 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4473 Add `add' instruction to the set that get checked
4474 for a preceding `sethi' in order to print an absolute address.
4475 * (print_insn): Disassembly prefers real instructions.
4476 (is_delayed_branch): Speed up.
4477 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4478 Still missing some float ops, and needs testing.
4479 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4480 F_ALIAS. Use printf, not fprintf, when not passing a file
4482 (compare_opcodes): Check that identical instructions have
4483 identical opcodes, complain otherwise.
4486 * Include reg_names.
4488 Use dis-asm.h/read_memory_func interface.
4490 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4492 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4493 deliberately return non-zero to setjmp from longjmp. Otherwise
4494 this code fails to compile.
4496 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4498 * m68k-dis.c: Fix prototype for fetch_arg().
4500 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4502 * dis-buf.c: New file, for new read_memory_func interface.
4503 Makefile.in (OFILES): Include it.
4504 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4505 Use new read_memory_func interface.
4507 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4509 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4510 * h8500-opc.h: Fix couple of opcodes.
4512 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4514 * Makefile.in: add dvi & installcheck targets
4516 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4518 * Makefile.in: Update for h8500-dis.c.
4520 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4522 * h8500-dis.c, h8500-opc.h: New files
4524 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4526 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4527 ../include/dis-asm.h.
4528 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4529 and ../gdb/m68k-pinsn.c).
4530 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4531 and ../gdb/i386-pinsn.c).
4532 * m68881-ext.c: New file. Moved definition of
4533 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4534 * Makefile.in: Adjust for new files.
4535 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4536 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4537 can be dis-assembled.
4539 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4541 * mips-dis.c (print_insn_arg): Now returns void.
4543 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4545 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4546 files that use the macros.
4548 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4550 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4551 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4552 (CFILES): Added mips-dis.c.
4554 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4556 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4557 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4559 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4561 * Makefile.in: Improve *clean rules.
4562 * configure.in: Allow a default host.
4564 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4566 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4567 files include other sysdep files
4569 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4571 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4573 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4575 * configure.in: For host support, use ../bfd/configure.host
4576 so it stays in sync with the ../bfd/hosts database.
4578 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4580 * configure.in: use cpu-vendor-os triple instead of nested cases
4582 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4584 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4585 *always* the wrong one.
4587 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4589 * z8kgen.c: added copyright info
4591 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4593 * z8k-dis.c (unparse_instr): prettier tabs
4594 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4596 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4598 * configure.in: Add ncr* configuration.
4599 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4600 picayune ANSI compilers happy.
4602 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4604 * configure.in (i386): Make i386 and i486 synonymous for now.
4605 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4607 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4609 * Makefile.in (install): Fix typo.
4611 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4613 * Makefile.in (make): Remove obsolete crud.
4614 (sparc-opc.o): Avoid Sun Make VPATH bug.
4616 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4618 * Makefile.in: since there are no SUBDIRS, remove rule and
4619 references of subdir_do.
4621 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4623 * Makefile.in (install): Get the library name right here too.
4624 Don't install bfd.h, since it's unrelated to this library. No
4625 subdirs to recurse into, either.
4626 (CFILES): The source file has a .c suffix, not .o.
4628 * sparc-opc.c: New file, moved from BFD.
4629 * Makefile.in (OFILES): Build it.
4631 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4633 * z8k-dis.c: fixed forward refferences of some declarations.
4635 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4637 * Makefile.in: get the name of the library right
4639 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4641 * z8k-dis.c: knows how to disassemble z8k stuff
4642 * z8k-opc.h: new file full of z8000 opcodes
4646 version-control: never