2 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
5 with immediate operand, "movhi". Tweak "ldsr".
7 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
8 correct. Get sld.[bhw] and sst.[bhw] closer.
10 * v850-opc.c (v850_operands): "not" is a two byte insn
12 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
14 * v850-opc.c (v850_operands): D16 inserts at offset 16!
16 * v850-opc.c (two): Get order of words correct.
18 * v850-opc.c (v850_operands): I16 inserts at offset 16!
20 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
21 register source and destination operands.
22 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
24 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
25 same thinko in "trap" opcode.
27 * v850-opc.c (v850_opcodes): Add initializer for size field
30 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
31 Add D8 for 8-bit unsigned field in short load/store insns.
32 (IF4A, IF4D): These both need two registers.
33 (IF4C, IF4D): Define. Use 8-bit unsigned field.
34 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
35 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
36 for "ldsr" and "stsr".
37 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
40 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
41 short store word (sst.w).
43 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
45 * v850-opc.c (v850_operands): Added insert and extract fields,
46 pointers to functions that handle unusual operand encodings.
48 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
50 * v850-opc.c (v850_opcodes): Enable "trap".
52 * v850-opc.c (v850_opcodes): Fix order of displacement
53 and register for "set1", "clr1", "not1", and "tst1".
55 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
57 * v850-opc.c (v850_operands): Add "B3" support.
58 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
61 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
63 * v850-opc.c: Close unterminated comment.
65 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
67 * v850-opc.c (v850_operands): Add flags field.
68 (v850_opcodes): add move opcodes.
70 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
72 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
73 * configure: (bfd_v850v_arch) Add new case.
74 * configure.in: (bfd_v850_arch) Add new case.
75 * v850-opc.c: New file.
78 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
80 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
83 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
85 * d10v-opc.c: Add additional information to the opcode
86 table to help determinine which instructions can be done
90 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
92 * mpw-make.sed: Update editing of include pathnames to be
95 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
97 * arm-opc.h: Added "bx" instruction definition.
99 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
101 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
104 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
106 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
108 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
110 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
113 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
115 * makefile.vms: Update for alpha-opc changes.
117 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
119 * i386-dis.c (print_insn_i386): Actually return the correct value.
120 (ONE, OP_ONE): #ifdef out; not used.
123 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
125 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
126 Changed subi operand type to treat 0 as 16.
129 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
131 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
134 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
136 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
137 memory transfer instructions. Add new format string entries %h and %s.
138 * arm-dis.c: (print_insn_arm): Provide decoding of the new
142 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
144 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
145 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
148 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
150 * alpha-dis.c (print_insn_alpha_osf): Remove.
151 (print_insn_alpha_vms): Remove.
152 (print_insn_alpha): Make globally visible. Chose the register
153 names based on info->flavour.
154 * disassemble.c: Always return print_insn_alpha for the alpha.
157 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
159 * d10v-dis.c (dis_long): Handle unknown opcodes.
161 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
163 * d10v-opc.c: Changes to support signed and unsigned numbers.
164 All instructions with the same name that have long and short forms
165 now end in ".l" or ".s". Divs added.
166 * d10v-dis.c: Changes to support signed and unsigned numbers.
168 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
170 * d10v-dis.c: Change all functions to use info->print_address_func.
173 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
175 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
176 move ccr/sr insns more strict so that the disassembler only
177 selects them when the addressing mode is data register.
180 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
181 * d10v-opc.c (pre_defined_registers): Declare.
182 * d10v-dis.c (print_operand): Now uses pre_defined_registers
183 to pick a better name for the registers.
186 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
188 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
189 operands for fexpand and fpmerge. From Christian Kuehnke
190 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
192 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
194 * alpha-dis.c (print_insn_alpha): No longer the user-visible
195 print routine. Take new regnames and cpumask arguments.
196 Kill the environment variable nonsense.
197 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
198 (print_insn_alpha_vms): New function. Do VMS style regnames.
199 * disassemble.c (disassembler): Test bfd flavour to pick
200 between OSF and VMS routines. Default to OSF.
202 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
204 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
205 * configure: Rebuild.
206 * Makefile.in (install): Use @INSTALL_SHLIB@.
209 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
211 * configure: (bfd_d10v_arch) Add new case.
212 * configure.in: (bfd_d10v_arch) Add new case.
213 * d10v-dis.c: New file.
214 * d10v-opc.c: New file.
215 * disassemble.c (disassembler) Add entry for d10v.
218 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
220 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
221 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
223 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
225 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
226 distinguish between variants of the instruction set.
227 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
228 distinguish between variants of the instruction set.
230 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
232 * i386-dis.c (print_insn_i8086): New routine to disassemble using
233 the 8086 instruction set.
234 * i386-dis.c: General cleanups. Make most things static. Add
235 prototypes. Get rid of static variables aflags and dflags. Pass
236 them as args (to almost everything).
238 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
240 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
242 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
244 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
245 if the next arg is marked with SRC_IN_DST. Gross.
247 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
248 we're looking for and find EXR.
250 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
251 if we're looking for KBIT and we don't find it.
253 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
256 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
257 3bit immediate operands.
259 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
261 * Released binutils 2.7.
263 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
264 <kkaempf@progis.ac-net.de>.
266 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
268 * alpha-opc.c: Correct second case of "mov" to use OPRL.
270 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
272 * sparc-dis.c (print_insn_sparclite): New routine to print
273 sparclite instructions.
275 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
277 * m68k-opc.c (m68k_opcodes): Add coldfire support.
279 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
281 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
282 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
283 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
285 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
287 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
288 Use autoconf-set values.
289 (docdir, oldincludedir): Removed.
290 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
292 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
294 * alpha-opc.c: New file.
295 * alpha-opc.h: Remove.
296 * alpha-dis.c: Complete rewrite to use new opcode table.
297 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
298 * configure: Rebuild with autoconf 2.10.
299 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
300 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
302 (alpha-opc.o): New target.
304 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
306 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
307 Set imm_added_to_rs1 even if the source and destination register
310 * sparc-opc.c: Add some two operand forms of the wr instruction.
312 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
314 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
317 * disassemble.c (disassembler): Handle H8/S.
318 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
320 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
322 * sparc-opc.c: Add beq/teq as aliases for be/te.
324 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
325 <sergei@msil.sps.mot.com>.
327 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
329 * makefile.vms: New file.
331 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
333 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
335 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
338 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
340 * i386-dis.c (OP_OFF): Call append_prefix.
342 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
344 * ppc-opc.c (instruction encoding macros): Add explicit casts to
345 unsigned long to silence a warning from the Solaris PowerPC
348 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
350 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
352 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
354 * sparc-dis.c (X_IMM,X_SIMM): New macros.
356 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
357 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
358 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
359 cpush, cpusha, cpull sparclet insns.
361 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
363 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
365 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
367 * sparc-opc.c: Set F_FBR on floating point branch instructions.
368 Set F_FLOAT on other floating point instructions.
370 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
372 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
374 (powerpc_opcodes): Add 860/821 specific SPRs.
376 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
378 * configure.in: Permit --enable-shared to specify a list of
379 directories. Set and substitute BFD_PICLIST.
380 * configure: Rebuild.
381 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
382 uses. Set to @BFD_PICLIST@.
384 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
386 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
387 not "abs", which may be needed for the absolute in something
388 like btst #0,@10:8. Print L_3 immediates separately from other
389 immediates. Change ABSMOV reference to ABS8MEM.
391 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
393 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
394 (current_arch_mask): New static global.
395 (compute_arch_mask): New static function.
396 (print_insn_sparc): Delete sparc_v9_p. New static local
397 current_mach. Resort opcode table if current_mach changes.
398 Generalize "insn not supported" test.
399 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
400 Delete test for v9/!v9.
401 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
403 (brfc): Split into CBR and FBR for coprocessor/fp branches.
404 (brfcx): Renamed to FBRX.
405 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
406 coprocessor mnemonics are not supported on the sparclet).
407 (condf): Renamed to CONDF.
408 (SLCBCC2): Delete F_ALIAS flag.
410 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
412 * sparc-opc.c (sparc_opcodes): rd must be 0 for
413 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
415 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
417 * Makefile.in (config.status): Depend upon BFD VERSION file, so
418 that the shared library version number is set correctly.
420 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
422 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
423 Miles Bader <miles@gnu.ai.mit.edu>.
424 * configure: Rebuild.
426 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
428 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
431 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
433 * configure: Rebuild with autoconf 2.8.
435 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
437 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
438 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
440 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
442 * configure.in: Don't set SHLIB or SHLINK to an empty string,
443 since they appear as targets in Makefile.in.
444 * configure: Rebuild.
446 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
448 * mpw-make.sed: Edit out shared library support bits.
450 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
452 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
453 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
454 (sparc_opcodes): Add sparclet insns.
455 (sparclet_cpreg_table): New static local.
456 (sparc_{encode,decode}_sparclet_cpreg): New functions.
457 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
459 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
461 * i386-dis.c (index16): New static variable.
462 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
464 (OP_indirE): Return result of OP_E.
465 (OP_E): Check for 16 bit addressing mode, and disassemble
466 correctly. Optimised 32 bit case a little. Don't print
467 "(base,index,scale)" when sib specifies only an offset.
469 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
471 * configure.in: Set and substitute SHLIB_DEP.
472 * configure: Rebuild.
473 * Makefile.in (SHLIB_DEP): New variable.
474 (LIBIBERTY_LISTS, BFD_LIST): New variables.
475 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
476 COMMON_SHLIB, add them to piclist with appropriate modifications.
477 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
478 here: just use piclist.
480 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
482 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
483 (print_insn_sparc): Rewrite v9/not-v9 tests.
484 (compare_opcodes): Likewise.
485 * sparc-opc.c (MASK_<ARCH>): Define.
486 (v6,v7,v8,sparclite,v9,v9a): Redefine.
487 (sparclet,v6notv9): Define.
488 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
489 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
491 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
493 * configure.in: Call AC_PROG_CC before configure.host.
494 * configure: Rebuild.
496 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
498 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
500 * i386-dis.c (onebyte_has_modrm): New static array.
501 (twobyte_has_modrm): New static array.
502 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
504 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
506 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
509 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
511 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
514 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
516 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
517 m68010up, not just m68020up | cpu32.
519 * Makefile.in (SONAME): New variable.
520 ($(SHLINK)): Make a link to the transformed name, as well.
521 (stamp-tshlink): New target.
522 (install): Skip stamp-tshlink during install.
524 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
526 * configure.in: Call AC_ARG_PROGRAM.
527 * configure: Rebuild.
528 * Makefile.in (program_transform_name): New variable.
529 (install): Transform library name before installing it.
531 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
533 * i960-dis.c (mem): Add HX dcinva instruction.
535 Support for building as a shared library, based on patches from
536 Alan Modra <alan@spri.levels.unisa.edu.au>:
537 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
538 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
539 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
540 * configure: Rebuild.
541 * Makefile.in (ALLLIBS): New variable.
542 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
543 (COMMON_SHLIB, SHLINK): New variables.
544 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
545 (STAGESTUFF): Remove variable.
546 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
547 (stamp-piclist, piclist): New targets.
548 ($(SHLIB), $(SHLINK)): New targets.
549 ($(OFILES)): Depend upon stamp-picdir.
550 (disassemble.o): Build twice if PICFLAG is set.
551 (MOSTLYCLEAN): Add pic/*.o.
552 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
553 (distclean): Remove pic and stamp-picdir.
554 (install): Install shared libraries.
555 (stamp-picdir): New target.
557 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
559 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
560 Print unknown instruction as "unknown", rather than in hex.
562 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
564 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
566 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
568 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
570 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
572 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
573 when necessary. From Ulrich Drepper
574 <drepper@myware.rz.uni-karlsruhe.de>.
576 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
578 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
579 sparc_num_opcodes. Update architecture enum values.
580 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
581 (sparc_opcode_lookup_arch): New function.
582 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
583 (sparc_opcodes): Add v9a shutdown insn.
585 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
587 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
588 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
590 (print_insn_sparc64): Deleted.
591 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
594 * sparc-opc.c (architecture_pname): Add v9a.
596 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
598 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
599 incorrectly defined as 0x16 when it should be 0x15.
600 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
601 (alpha_insn_set): added cvtst and cvttq float ops. Also added
602 excb (exception barrier) which is defined in the Alpha
603 Architecture Handbook version 2.
604 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
605 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
606 disassembled as or, for example.
608 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
610 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
611 (_print_insn_mips): Change i from int to unsigned int.
613 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
615 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
616 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
618 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
620 * i386-dis.c: Added Pentium Pro instructions.
622 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
624 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
627 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
629 * sh-opc.h (sh_nibble_type): Added REG_B.
630 (sh_arg_type): Added A_REG_B.
631 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
633 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
635 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
637 * disassemble.c (disassembler): Use new bfd_big_endian macro.
639 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
641 * Makefile.in (distclean): Remove stamp-h. From Ronald
642 F. Guilmette <rfg@monkeys.com>.
644 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
646 From David Mosberger-Tang <davidm@azstarnet.com>:
647 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
650 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
652 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
653 (sh_table): Added many SH3 opcodes.
654 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
656 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
658 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
659 (subco,subco.): Mark this PPC, not PPCCOM.
661 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
663 * configure: Rebuild with autoconf 2.7.
665 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
667 * configure: Rebuild with autoconf 2.6.
669 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
671 * configure.in: Sort list of architectures. Accept but do nothing
672 for alliant, convex, pyramid, romp, and tahoe.
674 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
676 * a29k-dis.c (print_special): Change num to unsigned int.
678 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
680 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
683 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
685 * configure.in: Call AC_CHECK_PROG to find and cache AR.
686 * configure: Rebuilt.
688 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
690 * configure.in: Add case for bfd_i860_arch.
691 * configure: Rebuild.
693 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
695 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
696 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
697 (NEXTDOUBLE): Likewise.
698 (print_insn_m68k): Don't match fmoveml if there is more than one
699 register in the list.
700 (print_insn_arg): Handle a place of '8' for a type of 'L'.
702 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
704 * m68k-opc.c: Use #W rather than #w.
705 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
707 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
709 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
710 and likewise for all the dbxx opcodes.
712 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
714 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
716 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
718 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
719 the VR4100 specific instructions to the mips_opcodes structure.
721 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
723 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
724 ugly Metrowerks bug in CW6, is fixed in CW7.
726 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
728 * ppc-opc.c (whole file): Add flags for common/any support.
730 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
732 * Makefile.in (BISON): Remove macro.
733 (FLAGS_TO_PASS): Remove BISON.
735 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
737 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
739 * m68k-dis.c (print_insn_m68k): Recognize all two-word
740 instructions that take no args by looking at the match mask.
741 (print_insn_arg): Always print "%" before register names.
742 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
743 [case '_']: Don't print "@#" before address.
744 [case 'J']: Use "%s" as format string, not register name.
745 [case 'B']: Treat place == 'C' like 'l' and 'L'.
747 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
749 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
752 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
754 From David Mosberger-Tang <davidm@azstarnet.com>
756 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
757 (alpha_insn_set): added definitions for VAX floating point
758 instructions (Unix compilers don't generate these, but handcoded
759 assembly might still use them).
761 * alpha-dis.c (print_insn_alpha): added support for disassembling
762 the miscellaneous instructions in the Alpha instruction set.
764 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
766 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
767 no longer create sysdep.h, sed ppc-opc.c to work around a
768 serious Metrowerks C bug.
769 * mpw-make.in: Remove.
770 * mpw-make.sed: New file, used by mpw-configure to edit
771 Makefile.in into an MPW makefile.
773 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
775 * Makefile.in (maintainer-clean): New synonym for realclean.
777 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
779 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
780 which use '0', '1', and '2' instead. Specify the proper size for
781 a pmove immediate operand. Correct the pmovefd patterns to be
782 moves to a register, not from a register.
783 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
785 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
787 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
788 %psr, %wim, %tbr as F_NOTV9.
790 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
792 * Makefile.in (Makefile): Just rebuild Makefile when running
794 (config.h, stamp-h): New targets.
795 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
796 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
798 * configure: Rebuild.
800 * mips-opc.c: Change unaligned loads and stores with "t,A"
801 operands to use "t,A(b)".
803 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
805 * sh-dis.c (print_insn_shx): Add F_FR0 support.
807 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
809 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
810 until 3 instead of until 2.
812 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
814 * Makefile.in (ALL_CFLAGS): Define.
815 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
816 (MOSTLYCLEAN): Add config.log.
817 (distclean): Don't remove config.log.
818 * configure.in: Substitute HDEFINES.
819 * configure: Rebuild.
821 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
823 * sh-opc.h (sh_arg_type): Add F_FR0.
824 (sh_table, case fmac): Add F_FR0 as first argument.
826 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
828 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
830 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
832 * sparc-dis.c: Remove all references to NO_V9.
834 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
836 * aclocal.m4: Just include ../bfd/aclocal.m4.
837 * configure: Rebuild.
839 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
841 * sparc-dis.c (X_DISP19): Define.
842 (print_insn, case 'G'): Use it.
843 (print_insn, case 'L'): Sign extend displacement.
845 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
847 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
848 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
849 host_makefile_frag or frags.
850 * aclocal.m4: New file.
851 * configure: Rebuild.
852 * Makefile.in (INSTALL): Set to @INSTALL@.
853 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
854 (INSTALL_DATA): Set to @INSTALL_DATA@.
856 (AR_FLAGS): Set to rc rather than qc.
857 (CC): Define as @CC@.
858 (CFLAGS): Set to @CFLAGS@.
859 (@host_makefile_frag@): Remove.
860 (config.status): Remove dependency upon @frags@.
862 * configure.in: ../bfd/config.bfd now just sets shell variables.
863 Use them rather than looking through target Makefile fragments.
864 * configure: Rebuild.
866 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
868 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
870 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
872 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
873 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
876 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
877 (lookup_{name,value}): New functions.
878 (prefetch_table): New static local.
879 (sparc_{encode,decode}_prefetch): New functions.
880 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
882 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
884 * sh-opc.h: Add blank lines to improve readabililty of sh3e
887 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
889 * sh-dis.c: Correct comment on first line of file.
891 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
893 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
895 * sparc-opc.c (asi, membar): New static locals.
896 (sparc_{encode,decode}_{asi,membar}): New functions.
897 (sparc_opcodes, membar insn): Fix.
898 * sparc-dis.c (print_insn): Call sparc_decode_asi.
899 Support decoding of membar masks.
902 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
904 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
906 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
908 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
909 and likewise for the other branches. Add bhs as an alias for bcc,
910 and likewise for the size variants. Add dbhs as an alias for
913 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
915 * sh-opc.h (FP sts instructions): Update to match reality.
917 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
919 * m68k-dis.c: (fpcr_names): Add % before all register names.
920 (reg_names): Likewise.
921 (print_insn_arg): Don't explicitly print % before register names.
922 Add % before register names in static array names. In case 'r',
923 print data registers as `@(Dn)', not `Dn@'. When printing a
924 memory address, don't print @# before it.
925 (print_indexed): Change base_disp and outer_disp from int to
926 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
927 syntax. Sign extend 8 byte displacement correctly.
928 (print_base): Print using MIT syntax. Print zpc when appropriate.
929 Change parameter disp from int to bfd_vma.
931 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
934 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
936 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
937 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
938 * sh-opc.h (sh_arg_type): Add new operand types.
939 (sh_table): Add new opcodes from SH3E Floating Point ISA.
941 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
943 * Makefile.in (distclean): Remove generated file config.h.
945 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
947 * Makefile.in (distclean): Remove generated file config.h.
949 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
951 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
953 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
955 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
956 rather than numopcodes. Use m68k_opcodes rather than removed
957 opcode function. Don't check F_ALIAS.
958 (print_insn_arg): Change first parameter to be const char *.
959 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
960 (m68k-opc.o): New target.
961 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
962 * configure: Rebuild.
964 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
966 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
967 (opcode_bits, opcode_hash_table): New variables.
968 (opcodes_initialized): Renamed from opcodes_sorted.
969 (build_hash_table): New function.
970 (is_delayed_branch): Use hash table.
971 (print_insn): Renamed from print_insn_sparc, made static.
972 Build and use hash table. If !sparc64, ignore sparc64 insns,
973 and vice-versa if sparc64.
974 (print_insn_sparc, print_insn_sparc64): New functions.
975 (compare_opcodes): Move sparc64 opcodes to end.
976 Print commutative insns with constant second.
977 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
979 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
981 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
982 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
983 avoids printing a delay slot in a delay slot.
984 * sh-opc.h (sh_table): Fully bracket last entry.
986 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
988 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
990 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
992 * configure.in: Get host_makefile_frag from ${srcdir}.
994 * configure.in: Autoconfiscated. Check for string[s].h. Create
995 config.h from config.in. Don't set up sysdep.h link.
996 * sysdep.h: New file.
997 * configure, config.in: New files, generated from configure.in.
998 * Makefile.in: Updated to be processed autoconf-style.
999 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1000 (Makefile): Depend on config.status.
1001 (config.status): New rule.
1002 * configure.bat: Update Makefile substitutions.
1004 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1006 * mips-opc.c (L1): Define.
1007 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1008 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1011 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1013 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1014 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1015 have multiple add units but only a single logical unit.
1017 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1018 shifted by 18, without any insertion or extraction function.
1019 (insert_cr, extract_cr): Remove.
1022 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1024 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1027 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1029 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1032 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1034 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1035 * sh-opc.h: Add copyright.
1037 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1039 * Makefile.in (crunch-m68k): Delete extra target accidentally
1040 checked in a while ago.
1042 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1044 * sh-opc.h (sh_table): Add SH3 support.
1046 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1048 * sh-opc.h: Added bsrf and braf.
1050 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1052 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1053 bogus [ls]fm{ea,fd} patterns.
1055 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1056 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1057 initialize it from memory. Make function static.
1058 (print_insn_{big,little}_arm): New functions.
1059 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1060 the correct endianness.
1063 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1065 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1066 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1069 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1071 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1074 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1076 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1077 17th, so that it builds again using GCC as the compiler.
1079 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1081 * mips-dis.c (print_insn_little_mips): Cast return value from
1082 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1083 expects an unsigned long, and that might be fewer words of
1084 argument storage (e.g., if bfd_vma is long long on a 32-bit
1086 (print_insn_big_mips): Likewise with bfd_getb32 value.
1087 (_print_insn_mips): Now static.
1089 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1091 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1092 gcc memory hog problem with initializer is fixed.
1095 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1097 * arc-opc.c (NULL): Define.
1098 (arc_operands, insn fields u,s): Delete.
1099 (arc_operands, insn fields a,b,c): Mark as signed.
1100 (arc_opcodes): No longer const, links computed at run-time.
1101 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1102 suffixes that affect the insn code.
1103 (arc_opcodes): Resort table to macros are first.
1104 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1105 (arc_opcodes, st [b] entry): Likewise.
1106 (arc_opcodes, st [b,d] entry): Fix mask, value.
1107 (arc_reg_names): Add entries for r29, r30, r31, r60.
1108 (opcode_map, icode_map): New static globals.
1109 (arc_opcode_init_tables): Initialize them.
1110 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1111 (insert_shimmoffset): Signal error if register present.
1113 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1116 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1118 Merge in support for Mac MPW as a host.
1119 (Old change descriptions retained for informational value.)
1121 * mpw-config.in (archname): Compute from the config.
1122 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1124 * mpw-config.in (target_arch): Compute from canonical target.
1125 (m68k, mips, powerpc, sparc): Add architectures.
1126 * mpw-make.in (disassemble.c.o): Add.
1127 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1129 * mpw-config.in (BFD_MACHINES): Set to a default value.
1130 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1132 * mpw-make.in (CSEARCH): Add extra-include to search path.
1134 * mpw-config.in (varargs.h): Don't create.
1135 (sysdep.h): Create using forward-include.
1136 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1138 * mpw-config.in: New file, MPW version of configure.in.
1139 * mpw-make.in: New file, MPW version of Makefile.in.
1142 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1144 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1145 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1146 (print_insn_*): Pass bfd mach number, not opcode version.
1147 * arc-opc.c (arc_get_opcode_mach): New function.
1150 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1152 * alpha-dis.c (print_insn_alpha): Put empty statement after
1155 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1157 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1158 (low_sign_extend): Likewise.
1159 (get_field): Delete unused function.
1160 (set_field, deposit_14, deposit_21): Likewise.
1162 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1164 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1167 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1169 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1171 * alpha-opc.h (OSF_ASMCODE): define
1172 print pal-code names as defined in App C of the
1173 Alpha Architecture Reference Manual
1175 * alpha-dis.c: cleaned up output
1176 print stylized code forms as defined in App A.4.3 of the
1177 Alpha Architecture Reference Manual
1179 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1181 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1183 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1186 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1188 * m68k-dis.c (opcode): New function. Returns address of opcode
1189 table entry given index, even if the opcode table was split to
1190 work around gcc bugs.
1191 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1193 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1194 (reg_names): Now const.
1195 (print_insn_arg): Arrays cacheFieldName and names now const.
1196 (print_indexed): Array scales now const.
1199 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1201 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1202 (print_insn_arc_{host,graphics,audio}): Likewise.
1203 (print_insn): Add prototype.
1204 (arc_get_disassembler): New arg `big_p'. Return little or big
1205 print fn accordingly.
1206 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1207 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1208 (arc_opval_supported): Likewise.
1209 * disassemble.c (disassembler): Pass big endian flag to
1210 arc_get_disassembler.
1213 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1215 * ppc-opc.c: Sort recently added instructions by minor opcode
1216 number within major opcode number.
1218 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1220 * hppa-dis.c: Include libhppa.h.
1222 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1224 * mips-opc.c: Change dli to use M_DLI, and add dla.
1226 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1228 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1231 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1233 * arc-dis.c (arc_get_disassembler): Change argument to int,
1234 one of bfd_mach_arc_xxx. All callers updated.
1237 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1239 * mips-opc.c: Add r4650 mul instruction.
1241 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1243 * mips-opc.c: Add uld and usd macros for unaligned double load and
1246 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1248 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1249 mfdcr, mtdcr, icbt, iccci.
1252 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1254 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1255 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1256 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1257 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1258 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1259 (insert_absaddr): New function.
1261 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1263 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1264 New argument `cpu', pass it to arc_opcode_init_tables.
1265 Document byte order dependencies. Ignore unsupported insns.
1266 (arc_get_disassembler): New function.
1267 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1268 print_insn_arc_audio): New functions.
1269 * arc-opc.c (MULTSHIFT operand): Delete.
1270 (UNSIGNED, SATURATION): New operands.
1271 (mac, mul, mul64, mulu64): New insns.
1272 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1273 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1274 (host,graphics,audio extended and auxiliary regs): Define.
1275 (ss, sc, mh, ml): New suffixes.
1276 (arc_opcode_supported, arc_opval_supported): New functions.
1277 (insert_multshift, extract_multshift): Deleted.
1278 * disassemble.c (disassembler, case bfd_arch_arc): Call
1279 arc_get_disassembler to get disassembler routine.
1282 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1284 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1285 signed char fields to shorts, more portable.
1287 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1289 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1290 char fields as signed chars, since they may have negative values.
1292 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1294 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1295 (mycroft@netbsd.org).
1297 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1299 From "Logg, Ed" <elogg@ea.com>:
1300 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1301 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1304 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1306 * ppc-opc.c: Changes based on patch from David Edelsohn
1307 <edelsohn@mhpcc.edu>.
1308 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1311 (insert_tbr): New static function.
1312 (extract_tbr): New static function.
1313 (XFXFXM_MASK, XFXM): Define.
1314 (XSPRBAT_MASK, XSPRG_MASK): Define.
1315 (powerpc_opcodes): Add instructions to access special registers by
1316 name. Add mtcr and mftbu.
1318 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1320 * mips-opc.c (P3): Define.
1321 (mips_opcodes): Add mad and madu.
1323 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1325 * configure.in: Add W65 support.
1326 * disassemble.c: Likewise.
1327 * w65-opc.h, w65-dis.c: New files.
1329 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1331 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1335 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1337 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1339 * arc-opc.c (extract_reladdr): New function.
1340 (insert_reladdr): Store address right-shifted by 2.
1343 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1345 * mips-opc.c: Add dli as a synonym for li.
1348 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1350 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1352 (extraction fns): Insn argument now array of two words. Return pointer
1353 to value's table entry. All uses changed.
1354 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1355 (insert_multshift, extract_multshift): New fns.
1356 (arc_operands): Add support for cache bypass suffix. Add support for
1357 predefined aux regs. Modifier bits moved to flags field.
1358 (arc_opcodes): Likewise.
1359 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1360 New insn rlc. Update to syntax in programmer's manual.
1361 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1362 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1364 (arc_opcode_init_tables): New argument to indicate cpu type.
1365 (insert_reg): Handle predefined aux regs.
1366 (extract_reg): Likewise.
1367 (lookup_register): New fn.
1368 * arc-dis.c (arc_condition_codes): Deleted.
1369 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1370 Clean up modifier handling. Handle predefined aux regs.
1373 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1375 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1376 print something for reserved opcode values, even if it won't
1379 * mips-dis.c (_print_insn_mips): When initializing, shift right
1380 and mask, to avoid sign extension problems on the Alpha.
1382 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1386 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1388 * configure.in: Add ARC support.
1389 * disassemble.c: Likewise.
1390 * arc-dis.c, arc-opc.c: New files.
1393 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1395 * sh-opc.h (mov.l gbr): Get direction right.
1396 * sh-dis.c (print_insn_shx): New function.
1397 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1398 print opcodes with right byte order.
1400 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1402 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1403 to avoid conflicts with getopt.
1405 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1407 * hppa-dis.c (print_insn_hppa): Read the instruction using
1408 bfd_getb32, so that it works on a little endian or 64 bit host.
1409 Remove unused local variable op.
1411 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1413 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1414 addu does not work correctly if -mips3.
1416 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1418 * a29k-dis.c (print_special): Add special register names defined
1419 on 29030, 29040 and 29050.
1420 (print_insn): Handle new operand type 'I'.
1422 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1424 * Makefile.in (INSTALL): Use top level install.sh script.
1426 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1428 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1429 that it works on a little endian host.
1431 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1433 * configure.in: Use ${config_shell} when running config.bfd.
1435 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1437 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1439 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1441 * a29k-dis.c (print_insn): Print the opcode.
1443 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1445 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1447 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1449 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1451 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1453 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1454 which store a value into memory.
1456 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1458 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1459 * arm-dis.c, arm-opc.h: New files.
1461 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1463 * Makefile.in (ns32k-dis.o): Add dependency.
1464 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1465 string, not as array of chars.
1467 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1469 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1471 * sparc-opc.c: Added sparclite extended FP operations, and
1472 versions of v9 impdep* instructions permitting specification of
1475 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1477 * i960-dis.c (reg_names): Now const.
1478 (struct sparse_tabent): New type, copied from array type in mem
1480 (ctrl): Local static array ctrl_tab now const.
1481 (cobr): Local static array cobr_tab now const.
1482 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1483 static variable mem_tab no longer explicitly initialized. Changed
1484 mem_init to const array of struct sparse_tabent.
1485 (reg): Local static variable reg_tab no longer explicitly
1486 initialized. Changed reg_init to const array of struct
1488 (ea): Local static array scale_tab now const.
1490 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1493 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1495 * configure.bat: the disassember needs to be enabled for
1496 "objdump -d" to work in djgpp.
1498 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1500 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1501 (invalid_float): Enabled general version, doesn't require running
1502 on ns32k host. Changed to take char* argument, and test for
1503 explicitly specified sizes, instead of using sizeof() on host CPU
1505 (INVALID_FLOAT): Cast first argument.
1506 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1507 list_P032, list_M032): Now const.
1508 (optlist, list_search): Made appropriate arguments now point to
1510 (print_insn_arg): Changed static array of one-character-string
1511 pointers into a static const array of characters; fixed sprintf
1512 statement accordingly.
1514 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1516 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1517 from distribution. A ns32k-dis.c from a previous distribution has
1518 been brought up to date and supports the new interface.
1520 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1522 * configure.in: add bfd_ns32k_arch target support.
1524 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1525 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1527 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1529 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1532 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1534 * h8300-dis.c, mips-dis.c: Don't use true and false.
1536 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1538 * configure.in: Change --with-targets to --enable-targets.
1540 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1542 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1543 opcodes to the first instruction with that opcode, to speed
1544 disassembly of large files. From ralphc@pyramid.com (Ralph
1547 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1549 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1551 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1553 * configure.bat: update to latest makefile.in
1555 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1557 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1558 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1559 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1560 slot insn is in a delay slot.
1561 * z8k-opc.h: (resflg): Fix patterns.
1562 * h8500-opc.h Fix CR insn patterns.
1564 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1566 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1567 "cmpl" before POWER versions, so that gas -many uses them.
1569 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1571 * disassemble.c: New file.
1572 * Makefile.in (OFILES): Add disassemble.o.
1573 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1574 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1575 binutils/configure.in.
1577 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1578 opcode being examined.
1580 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1582 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1583 (insert_ral, insert_ram, insert_ras): New functions.
1584 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1585 RAS for store with update.
1587 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1589 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1590 (edelsohn@npac.syr.edu).
1592 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1594 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1597 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1599 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1601 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1603 * ppc-opc.c (powerpc_operands): The signedp field has been
1604 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1605 instead. Add new operand SISIGNOPT.
1606 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1607 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1608 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1611 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1613 * i386-dis.c (struct private): Renamed to dis_private. `private'
1614 is a reserved word for dynix cc.
1616 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1618 * configure.in: Change error message to refer to bfd/config.bfd
1619 rather than bfd/configure.in.
1621 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1623 * ppc-opc.c: Define POWER2 as short alias flag.
1624 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1627 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1629 * i960-dis.c (print_insn_i960): Don't read a second word for
1630 opcodes 0, 1, 2 and 3.
1632 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1634 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1636 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1638 * m68881-ext.c: Removed; no longer used.
1639 * Makefile.in: Changed accordingly.
1641 * m68k-dis.c (ext_format_68881): Don't declare.
1642 (print_insn_m68k): If an instruction uses place 'i', it uses at
1643 least four fixed bytes.
1644 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1645 extended float, convert to double using floatformat_to_double, not
1646 ieee_extended_to_double, and fetch the data before converting it.
1648 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1650 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1651 davidj@ICSI.Berkeley.EDU (David Johnson).
1653 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1655 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1656 PowerPC uses bdnz[l][a].
1658 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1660 * dis-buf.c, i386-dis.c: Include sysdep.h.
1662 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1664 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1666 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1667 by Motorola PowerPC 601 with PPC_OPCODE_601.
1668 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1669 Disassemble Motorola PowerPC 601 instructions as well as normal
1670 PowerPC instructions.
1672 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1674 * i960-dis.c (reg, mem): Just use a static array instead of
1677 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1679 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1680 condition name index if this is for a negated condition.
1682 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1683 Floating point format for 'H' operand is backwards from normal
1684 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1685 operands (fmpyadd and fmpysub), handle bizarre register
1686 translation correctly for single precision format.
1688 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1689 or 'I' operands if the next format specifier is 'M' (fcmp
1690 condition completer).
1692 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1694 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1695 single number giving a bitmask for the MB and ME fields of an M
1696 form instruction. Change NB to accept 32, and turn it into 0;
1697 also turn 0 into 32 when disassembling. Seperated SH from NB.
1698 (insert_mbe, extract_mbe): New functions.
1699 (insert_nb, extract_nb): New functions.
1700 (SC_MASK): Mask out SA and LK bits.
1701 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1702 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1703 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1704 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1705 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1706 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1707 (powerpc_macros): Define table of macro definitions.
1708 (powerpc_num_macros): Define.
1710 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1711 if PPC_OPERAND_NEXT is set.
1713 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1715 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1716 char. Retrieve contents using bfd_getl32 instead of shifting.
1718 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1720 * ppc-opc.c: New file. Opcode table for PowerPC, including
1721 opcodes for POWER (RS/6000).
1722 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1723 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1724 (CFILES): Add ppc-dis.c.
1725 (ppc-dis.o, ppc-opc.o): New targets.
1726 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1728 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1730 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1731 No space before 'u', 'f', or 'N'.
1733 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1735 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1736 farther than we should.
1738 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1740 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1742 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1744 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1746 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1747 needs it, to prevent reading past the end of a section.
1749 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1751 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1752 Removed t,A case for la; always use t,A(b) case.
1754 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1756 From Ted Lemen <mellon@pepper.ncd.com>
1757 * mips-dis.c (print_insn_arg): Handle 'k'.
1758 * mips-opc.c: Make cache use k, not t.
1760 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1762 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1763 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1764 FLOAT_FORMAT_CODE to put out floating point register names.
1766 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1768 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1770 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1772 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1774 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1776 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1777 larger than 32. Moved dsxx32 variants first for disassembler.
1779 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1781 * z8kgen.c, z8k-opc.h: Add full lda information.
1783 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1785 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1786 movb instructions. Any necessary space will be emitted by
1787 the code to handle nullification completers.
1789 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1791 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1793 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1795 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1796 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1798 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1800 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1802 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1804 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1805 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1807 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1809 * m88k-dis.c (m88kdis): comment change. Remove space after
1811 (printop): handle new arg types DEC and XREG for m88110.
1813 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1815 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1816 type for absolute branch addresses. Delete special
1817 "ble" and "be" code in 'W' operand code.
1819 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1821 * mips-opc.c: Set hazard information correctly for branch
1822 likely instructions.
1824 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1826 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1827 info->fprintf_func for printing and info->print_address_func for
1830 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1832 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1834 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1836 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1837 Corrected second case of "b" for disassembler.
1839 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1841 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1842 to BFD swapping routines to correspond to BFD name changes.
1844 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1846 * mips-opc.c: Change div machine instruction to be z,s,t rather
1847 than s,t. Change div macro to be d,v,t rather than d,s,t.
1848 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1849 rem and remu which generates only the corresponding div
1850 instruction. This is for compatibility with the MIPS assembler,
1851 which only generates the simple machine instruction when an
1852 explicit destination of $0 is used.
1853 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1855 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1857 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1858 WR_31 hazard for bal, bgezal, bltzal.
1860 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1862 * hppa-dis.c (print_insn_hppa): Use print function
1863 from within the disassemble_info, not fprintf_filtered.
1865 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1867 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1868 Law, law@cs.utah.edu.)
1870 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1872 * mips-opc.c ("absu"): Removed.
1875 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1877 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1878 Changed hazard information to distinguish between memory load
1879 delays and coprocessor load delays.
1881 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1883 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1885 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1887 * configure.in: Don't pass cpu to config.bfd.
1889 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1891 * m88k-dis.c (m88kdis): Make class unsigned.
1893 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1895 * alpha-dis.c (print_insn_alpha): One branch format case was
1896 missing the instruction name.
1898 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1900 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1901 Add the arch-specific auxiliary files.
1902 (OFILES): Remove the arch-specific auxiliary files
1903 and use BFD_MACHINES instead of DIS_LIBS.
1904 * configure.in: Set BFD_MACHINES based on --with-targets option.
1906 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1908 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1911 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1913 * sparc-opc.c: Change CONST to const to deal with gcc
1914 -Dconst=__const -traditional.
1916 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1918 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1919 coprocessor instructions out of #if 0, and made them use new
1922 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1924 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1926 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1928 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1929 instruction, for use by the disassembler.
1931 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1932 hand-coded sign extensions that depended on 32-bit host ints.
1933 FIXME, we still depend on big-endian host bitfield ordering.
1934 (sparc_print_insn): Set the insn_info_valid field, and the
1935 other fields that describe the instruction being printed.
1937 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1939 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1940 `jmp' instead of just one of them.
1942 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1944 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1945 (fput_fp_reg_r): Renamed from fput_reg_r.
1946 (fput_fp_reg): New function.
1947 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1949 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1951 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1953 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1955 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1957 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1958 don't output a space.
1960 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1962 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1964 * mips-opc.c: New file, containing opcode table from
1965 ../include/opcode/mips.h.
1966 * Makefile.in: Add it.
1968 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1970 * m88k-dis.c: New file, moved in from gdb and changed to use the
1971 new dis-asm.h disassembler interface.
1972 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1973 (m88k-dis.o): New target.
1975 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1977 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1978 argument string const char * to correspond to opcode/mips.h.
1980 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1982 * mips-dis.c: Updated to account for name changes in new version
1984 * Makefile.in: Added header file dependencies.
1986 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1988 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1990 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1992 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1993 extend, rather than shifts.
1995 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1997 * Makefile.in: Undo 15 June change.
1999 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2001 * m68k-dis.c (print_insn_arg): Change return value to byte count
2003 * m68k-dis.c: Re-write to detect invalid operands before
2004 printing anything, so we can handle this the same way we
2005 handle invalid opcodes.
2007 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2009 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2011 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2013 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2016 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2018 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2020 * configure.in: Do make sysdep.h link.
2021 * Makefile.in: Search ../include. Don't search ../bfd.
2023 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2025 Changes from Jeff Law, law@cs.utah.edu:
2026 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2027 Do not print a space before the completers specified by
2030 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2032 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2033 defined, since gdb has been fixed.
2035 Changes from Jeff Law, law@cs.utah.edu:
2036 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2037 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2038 be a *disassemble_info, not a *FILE.
2039 * hppa-dis.c: Support 'd', '!', and 'a'.
2040 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2041 * hppa-dis.c: Delete cases which are no longer needed.
2043 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2045 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2047 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2049 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2052 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2054 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2055 * configure.in: No longer need to configure to get sysdep.h.
2057 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2059 * Patches from Jeffrey Law <law@cs.utah.edu>.
2060 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2061 templates for 1.1 FP computational instructions.
2063 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2065 * h8500-dis.c (print_insn_h8500): Address argument is type
2067 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2070 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2071 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2073 * sparc-dis.c (compare_opcodes): Move static declaration to
2076 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2078 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2079 instruction, remove unimp hack from 'l' argument.
2081 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2083 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2086 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2088 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2089 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2092 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2094 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2095 arrays of string pointers to 2-d arrays of chars, to save
2098 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2100 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2101 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2103 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2105 * hppa-dis.c: New file from Utah, adapted to new disassembler
2107 * Makefile.in: Include it.
2109 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2111 * sh-dis.c, sh-opc.h: New files.
2113 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2115 * alpha-dis.c, alpha-opc.h: New files.
2117 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2119 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2122 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2124 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2126 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2128 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2131 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2133 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2134 and double percent signs a few places.
2136 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2138 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2139 Use info->print_address_func not print_address.
2141 * dis-buf.c (generic_print_address): New function.
2143 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2145 * Makefile.in: Add sparc-dis.c.
2146 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2148 Add `add' instruction to the set that get checked
2149 for a preceding `sethi' in order to print an absolute address.
2150 * (print_insn): Disassembly prefers real instructions.
2151 (is_delayed_branch): Speed up.
2152 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2153 Still missing some float ops, and needs testing.
2154 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2155 F_ALIAS. Use printf, not fprintf, when not passing a file
2157 (compare_opcodes): Check that identical instructions have
2158 identical opcodes, complain otherwise.
2161 * Include reg_names.
2163 Use dis-asm.h/read_memory_func interface.
2165 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2167 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2168 deliberately return non-zero to setjmp from longjmp. Otherwise
2169 this code fails to compile.
2171 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2173 * m68k-dis.c: Fix prototype for fetch_arg().
2175 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2177 * dis-buf.c: New file, for new read_memory_func interface.
2178 Makefile.in (OFILES): Include it.
2179 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2180 Use new read_memory_func interface.
2182 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2184 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2185 * h8500-opc.h: Fix couple of opcodes.
2187 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2189 * Makefile.in: add dvi & installcheck targets
2191 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2193 * Makefile.in: Update for h8500-dis.c.
2195 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2197 * h8500-dis.c, h8500-opc.h: New files
2199 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2201 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2202 ../include/dis-asm.h.
2203 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2204 and ../gdb/m68k-pinsn.c).
2205 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2206 and ../gdb/i386-pinsn.c).
2207 * m68881-ext.c: New file. Moved definition of
2208 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2209 * Makefile.in: Adjust for new files.
2210 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2211 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2212 can be dis-assembled.
2214 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2216 * mips-dis.c (print_insn_arg): Now returns void.
2218 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2220 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2221 files that use the macros.
2223 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2225 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2226 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2227 (CFILES): Added mips-dis.c.
2229 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2231 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2232 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2234 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2236 * Makefile.in: Improve *clean rules.
2237 * configure.in: Allow a default host.
2239 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2241 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2242 files include other sysdep files
2244 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2246 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2248 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2250 * configure.in: For host support, use ../bfd/configure.host
2251 so it stays in sync with the ../bfd/hosts database.
2253 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2255 * configure.in: use cpu-vendor-os triple instead of nested cases
2257 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2259 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2260 *always* the wrong one.
2262 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2264 * z8kgen.c: added copyright info
2266 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2268 * z8k-dis.c (unparse_instr): prettier tabs
2269 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2271 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2273 * configure.in: Add ncr* configuration.
2274 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2275 picayune ANSI compilers happy.
2277 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2279 * configure.in (i386): Make i386 and i486 synonymous for now.
2280 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2282 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2284 * Makefile.in (install): Fix typo.
2286 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2288 * Makefile.in (make): Remove obsolete crud.
2289 (sparc-opc.o): Avoid Sun Make VPATH bug.
2291 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2293 * Makefile.in: since there are no SUBDIRS, remove rule and
2294 references of subdir_do.
2296 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2298 * Makefile.in (install): Get the library name right here too.
2299 Don't install bfd.h, since it's unrelated to this library. No
2300 subdirs to recurse into, either.
2301 (CFILES): The source file has a .c suffix, not .o.
2303 * sparc-opc.c: New file, moved from BFD.
2304 * Makefile.in (OFILES): Build it.
2306 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2308 * z8k-dis.c: fixed forward refferences of some declarations.
2310 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2312 * Makefile.in: get the name of the library right
2314 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2316 * z8k-dis.c: knows how to disassemble z8k stuff
2317 * z8k-opc.h: new file full of z8000 opcodes
2321 version-control: never
projects / deliverable / binutils-gdb.git / blob