2 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c (v850_operansd): 3-bit immediate for bit insns
7 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
8 short store word (sst.w).
10 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
12 * v850-opc.c (v850_operands): Added insert and extract fields,
13 pointers to functions that handle unusual operand encodings.
15 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
17 * v850-opc.c (v850_opcodes): Enable "trap".
19 * v850-opc.c (v850_opcodes): Fix order of displacement
20 and register for "set1", "clr1", "not1", and "tst1".
22 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
24 * v850-opc.c (v850_operands): Add "B3" support.
25 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
28 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
30 * v850-opc.c: Close unterminated comment.
32 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
34 * v850-opc.c (v850_operands): Add flags field.
35 (v850_opcodes): add move opcodes.
37 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
39 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
40 * configure: (bfd_v850v_arch) Add new case.
41 * configure.in: (bfd_v850_arch) Add new case.
42 * v850-opc.c: New file.
45 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
47 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
50 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
52 * d10v-opc.c: Add additional information to the opcode
53 table to help determinine which instructions can be done
57 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
59 * mpw-make.sed: Update editing of include pathnames to be
62 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
64 * arm-opc.h: Added "bx" instruction definition.
66 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
68 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
71 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
73 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
75 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
77 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
80 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
82 * makefile.vms: Update for alpha-opc changes.
84 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
86 * i386-dis.c (print_insn_i386): Actually return the correct value.
87 (ONE, OP_ONE): #ifdef out; not used.
90 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
92 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
93 Changed subi operand type to treat 0 as 16.
96 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
98 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
101 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
103 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
104 memory transfer instructions. Add new format string entries %h and %s.
105 * arm-dis.c: (print_insn_arm): Provide decoding of the new
109 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
111 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
112 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
115 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
117 * alpha-dis.c (print_insn_alpha_osf): Remove.
118 (print_insn_alpha_vms): Remove.
119 (print_insn_alpha): Make globally visible. Chose the register
120 names based on info->flavour.
121 * disassemble.c: Always return print_insn_alpha for the alpha.
124 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
126 * d10v-dis.c (dis_long): Handle unknown opcodes.
128 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
130 * d10v-opc.c: Changes to support signed and unsigned numbers.
131 All instructions with the same name that have long and short forms
132 now end in ".l" or ".s". Divs added.
133 * d10v-dis.c: Changes to support signed and unsigned numbers.
135 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
137 * d10v-dis.c: Change all functions to use info->print_address_func.
140 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
142 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
143 move ccr/sr insns more strict so that the disassembler only
144 selects them when the addressing mode is data register.
147 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
148 * d10v-opc.c (pre_defined_registers): Declare.
149 * d10v-dis.c (print_operand): Now uses pre_defined_registers
150 to pick a better name for the registers.
153 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
155 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
156 operands for fexpand and fpmerge. From Christian Kuehnke
157 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
159 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
161 * alpha-dis.c (print_insn_alpha): No longer the user-visible
162 print routine. Take new regnames and cpumask arguments.
163 Kill the environment variable nonsense.
164 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
165 (print_insn_alpha_vms): New function. Do VMS style regnames.
166 * disassemble.c (disassembler): Test bfd flavour to pick
167 between OSF and VMS routines. Default to OSF.
169 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
171 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
172 * configure: Rebuild.
173 * Makefile.in (install): Use @INSTALL_SHLIB@.
176 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
178 * configure: (bfd_d10v_arch) Add new case.
179 * configure.in: (bfd_d10v_arch) Add new case.
180 * d10v-dis.c: New file.
181 * d10v-opc.c: New file.
182 * disassemble.c (disassembler) Add entry for d10v.
185 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
187 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
188 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
190 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
192 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
193 distinguish between variants of the instruction set.
194 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
195 distinguish between variants of the instruction set.
197 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
199 * i386-dis.c (print_insn_i8086): New routine to disassemble using
200 the 8086 instruction set.
201 * i386-dis.c: General cleanups. Make most things static. Add
202 prototypes. Get rid of static variables aflags and dflags. Pass
203 them as args (to almost everything).
205 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
207 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
209 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
211 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
212 if the next arg is marked with SRC_IN_DST. Gross.
214 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
215 we're looking for and find EXR.
217 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
218 if we're looking for KBIT and we don't find it.
220 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
223 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
224 3bit immediate operands.
226 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
228 * Released binutils 2.7.
230 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
231 <kkaempf@progis.ac-net.de>.
233 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
235 * alpha-opc.c: Correct second case of "mov" to use OPRL.
237 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
239 * sparc-dis.c (print_insn_sparclite): New routine to print
240 sparclite instructions.
242 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
244 * m68k-opc.c (m68k_opcodes): Add coldfire support.
246 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
248 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
249 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
250 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
252 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
254 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
255 Use autoconf-set values.
256 (docdir, oldincludedir): Removed.
257 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
259 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
261 * alpha-opc.c: New file.
262 * alpha-opc.h: Remove.
263 * alpha-dis.c: Complete rewrite to use new opcode table.
264 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
265 * configure: Rebuild with autoconf 2.10.
266 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
267 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
269 (alpha-opc.o): New target.
271 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
273 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
274 Set imm_added_to_rs1 even if the source and destination register
277 * sparc-opc.c: Add some two operand forms of the wr instruction.
279 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
281 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
284 * disassemble.c (disassembler): Handle H8/S.
285 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
287 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
289 * sparc-opc.c: Add beq/teq as aliases for be/te.
291 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
292 <sergei@msil.sps.mot.com>.
294 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
296 * makefile.vms: New file.
298 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
300 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
302 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
305 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
307 * i386-dis.c (OP_OFF): Call append_prefix.
309 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
311 * ppc-opc.c (instruction encoding macros): Add explicit casts to
312 unsigned long to silence a warning from the Solaris PowerPC
315 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
317 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
319 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
321 * sparc-dis.c (X_IMM,X_SIMM): New macros.
323 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
324 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
325 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
326 cpush, cpusha, cpull sparclet insns.
328 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
330 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
332 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
334 * sparc-opc.c: Set F_FBR on floating point branch instructions.
335 Set F_FLOAT on other floating point instructions.
337 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
339 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
341 (powerpc_opcodes): Add 860/821 specific SPRs.
343 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
345 * configure.in: Permit --enable-shared to specify a list of
346 directories. Set and substitute BFD_PICLIST.
347 * configure: Rebuild.
348 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
349 uses. Set to @BFD_PICLIST@.
351 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
353 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
354 not "abs", which may be needed for the absolute in something
355 like btst #0,@10:8. Print L_3 immediates separately from other
356 immediates. Change ABSMOV reference to ABS8MEM.
358 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
360 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
361 (current_arch_mask): New static global.
362 (compute_arch_mask): New static function.
363 (print_insn_sparc): Delete sparc_v9_p. New static local
364 current_mach. Resort opcode table if current_mach changes.
365 Generalize "insn not supported" test.
366 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
367 Delete test for v9/!v9.
368 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
370 (brfc): Split into CBR and FBR for coprocessor/fp branches.
371 (brfcx): Renamed to FBRX.
372 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
373 coprocessor mnemonics are not supported on the sparclet).
374 (condf): Renamed to CONDF.
375 (SLCBCC2): Delete F_ALIAS flag.
377 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
379 * sparc-opc.c (sparc_opcodes): rd must be 0 for
380 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
382 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
384 * Makefile.in (config.status): Depend upon BFD VERSION file, so
385 that the shared library version number is set correctly.
387 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
389 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
390 Miles Bader <miles@gnu.ai.mit.edu>.
391 * configure: Rebuild.
393 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
395 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
398 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
400 * configure: Rebuild with autoconf 2.8.
402 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
404 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
405 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
407 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
409 * configure.in: Don't set SHLIB or SHLINK to an empty string,
410 since they appear as targets in Makefile.in.
411 * configure: Rebuild.
413 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
415 * mpw-make.sed: Edit out shared library support bits.
417 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
419 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
420 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
421 (sparc_opcodes): Add sparclet insns.
422 (sparclet_cpreg_table): New static local.
423 (sparc_{encode,decode}_sparclet_cpreg): New functions.
424 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
426 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
428 * i386-dis.c (index16): New static variable.
429 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
431 (OP_indirE): Return result of OP_E.
432 (OP_E): Check for 16 bit addressing mode, and disassemble
433 correctly. Optimised 32 bit case a little. Don't print
434 "(base,index,scale)" when sib specifies only an offset.
436 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
438 * configure.in: Set and substitute SHLIB_DEP.
439 * configure: Rebuild.
440 * Makefile.in (SHLIB_DEP): New variable.
441 (LIBIBERTY_LISTS, BFD_LIST): New variables.
442 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
443 COMMON_SHLIB, add them to piclist with appropriate modifications.
444 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
445 here: just use piclist.
447 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
449 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
450 (print_insn_sparc): Rewrite v9/not-v9 tests.
451 (compare_opcodes): Likewise.
452 * sparc-opc.c (MASK_<ARCH>): Define.
453 (v6,v7,v8,sparclite,v9,v9a): Redefine.
454 (sparclet,v6notv9): Define.
455 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
456 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
458 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
460 * configure.in: Call AC_PROG_CC before configure.host.
461 * configure: Rebuild.
463 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
465 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
467 * i386-dis.c (onebyte_has_modrm): New static array.
468 (twobyte_has_modrm): New static array.
469 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
471 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
473 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
476 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
478 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
481 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
483 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
484 m68010up, not just m68020up | cpu32.
486 * Makefile.in (SONAME): New variable.
487 ($(SHLINK)): Make a link to the transformed name, as well.
488 (stamp-tshlink): New target.
489 (install): Skip stamp-tshlink during install.
491 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
493 * configure.in: Call AC_ARG_PROGRAM.
494 * configure: Rebuild.
495 * Makefile.in (program_transform_name): New variable.
496 (install): Transform library name before installing it.
498 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
500 * i960-dis.c (mem): Add HX dcinva instruction.
502 Support for building as a shared library, based on patches from
503 Alan Modra <alan@spri.levels.unisa.edu.au>:
504 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
505 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
506 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
507 * configure: Rebuild.
508 * Makefile.in (ALLLIBS): New variable.
509 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
510 (COMMON_SHLIB, SHLINK): New variables.
511 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
512 (STAGESTUFF): Remove variable.
513 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
514 (stamp-piclist, piclist): New targets.
515 ($(SHLIB), $(SHLINK)): New targets.
516 ($(OFILES)): Depend upon stamp-picdir.
517 (disassemble.o): Build twice if PICFLAG is set.
518 (MOSTLYCLEAN): Add pic/*.o.
519 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
520 (distclean): Remove pic and stamp-picdir.
521 (install): Install shared libraries.
522 (stamp-picdir): New target.
524 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
526 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
527 Print unknown instruction as "unknown", rather than in hex.
529 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
531 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
533 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
535 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
537 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
539 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
540 when necessary. From Ulrich Drepper
541 <drepper@myware.rz.uni-karlsruhe.de>.
543 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
545 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
546 sparc_num_opcodes. Update architecture enum values.
547 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
548 (sparc_opcode_lookup_arch): New function.
549 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
550 (sparc_opcodes): Add v9a shutdown insn.
552 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
554 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
555 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
557 (print_insn_sparc64): Deleted.
558 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
561 * sparc-opc.c (architecture_pname): Add v9a.
563 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
565 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
566 incorrectly defined as 0x16 when it should be 0x15.
567 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
568 (alpha_insn_set): added cvtst and cvttq float ops. Also added
569 excb (exception barrier) which is defined in the Alpha
570 Architecture Handbook version 2.
571 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
572 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
573 disassembled as or, for example.
575 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
577 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
578 (_print_insn_mips): Change i from int to unsigned int.
580 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
582 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
583 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
585 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
587 * i386-dis.c: Added Pentium Pro instructions.
589 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
591 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
594 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
596 * sh-opc.h (sh_nibble_type): Added REG_B.
597 (sh_arg_type): Added A_REG_B.
598 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
600 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
602 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
604 * disassemble.c (disassembler): Use new bfd_big_endian macro.
606 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
608 * Makefile.in (distclean): Remove stamp-h. From Ronald
609 F. Guilmette <rfg@monkeys.com>.
611 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
613 From David Mosberger-Tang <davidm@azstarnet.com>:
614 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
617 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
619 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
620 (sh_table): Added many SH3 opcodes.
621 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
623 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
625 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
626 (subco,subco.): Mark this PPC, not PPCCOM.
628 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
630 * configure: Rebuild with autoconf 2.7.
632 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
634 * configure: Rebuild with autoconf 2.6.
636 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
638 * configure.in: Sort list of architectures. Accept but do nothing
639 for alliant, convex, pyramid, romp, and tahoe.
641 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
643 * a29k-dis.c (print_special): Change num to unsigned int.
645 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
647 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
650 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
652 * configure.in: Call AC_CHECK_PROG to find and cache AR.
653 * configure: Rebuilt.
655 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
657 * configure.in: Add case for bfd_i860_arch.
658 * configure: Rebuild.
660 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
662 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
663 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
664 (NEXTDOUBLE): Likewise.
665 (print_insn_m68k): Don't match fmoveml if there is more than one
666 register in the list.
667 (print_insn_arg): Handle a place of '8' for a type of 'L'.
669 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
671 * m68k-opc.c: Use #W rather than #w.
672 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
674 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
676 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
677 and likewise for all the dbxx opcodes.
679 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
681 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
683 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
685 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
686 the VR4100 specific instructions to the mips_opcodes structure.
688 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
690 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
691 ugly Metrowerks bug in CW6, is fixed in CW7.
693 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
695 * ppc-opc.c (whole file): Add flags for common/any support.
697 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
699 * Makefile.in (BISON): Remove macro.
700 (FLAGS_TO_PASS): Remove BISON.
702 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
704 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
706 * m68k-dis.c (print_insn_m68k): Recognize all two-word
707 instructions that take no args by looking at the match mask.
708 (print_insn_arg): Always print "%" before register names.
709 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
710 [case '_']: Don't print "@#" before address.
711 [case 'J']: Use "%s" as format string, not register name.
712 [case 'B']: Treat place == 'C' like 'l' and 'L'.
714 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
716 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
719 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
721 From David Mosberger-Tang <davidm@azstarnet.com>
723 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
724 (alpha_insn_set): added definitions for VAX floating point
725 instructions (Unix compilers don't generate these, but handcoded
726 assembly might still use them).
728 * alpha-dis.c (print_insn_alpha): added support for disassembling
729 the miscellaneous instructions in the Alpha instruction set.
731 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
733 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
734 no longer create sysdep.h, sed ppc-opc.c to work around a
735 serious Metrowerks C bug.
736 * mpw-make.in: Remove.
737 * mpw-make.sed: New file, used by mpw-configure to edit
738 Makefile.in into an MPW makefile.
740 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
742 * Makefile.in (maintainer-clean): New synonym for realclean.
744 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
746 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
747 which use '0', '1', and '2' instead. Specify the proper size for
748 a pmove immediate operand. Correct the pmovefd patterns to be
749 moves to a register, not from a register.
750 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
752 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
754 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
755 %psr, %wim, %tbr as F_NOTV9.
757 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
759 * Makefile.in (Makefile): Just rebuild Makefile when running
761 (config.h, stamp-h): New targets.
762 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
763 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
765 * configure: Rebuild.
767 * mips-opc.c: Change unaligned loads and stores with "t,A"
768 operands to use "t,A(b)".
770 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
772 * sh-dis.c (print_insn_shx): Add F_FR0 support.
774 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
776 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
777 until 3 instead of until 2.
779 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
781 * Makefile.in (ALL_CFLAGS): Define.
782 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
783 (MOSTLYCLEAN): Add config.log.
784 (distclean): Don't remove config.log.
785 * configure.in: Substitute HDEFINES.
786 * configure: Rebuild.
788 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
790 * sh-opc.h (sh_arg_type): Add F_FR0.
791 (sh_table, case fmac): Add F_FR0 as first argument.
793 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
795 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
797 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
799 * sparc-dis.c: Remove all references to NO_V9.
801 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
803 * aclocal.m4: Just include ../bfd/aclocal.m4.
804 * configure: Rebuild.
806 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
808 * sparc-dis.c (X_DISP19): Define.
809 (print_insn, case 'G'): Use it.
810 (print_insn, case 'L'): Sign extend displacement.
812 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
814 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
815 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
816 host_makefile_frag or frags.
817 * aclocal.m4: New file.
818 * configure: Rebuild.
819 * Makefile.in (INSTALL): Set to @INSTALL@.
820 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
821 (INSTALL_DATA): Set to @INSTALL_DATA@.
823 (AR_FLAGS): Set to rc rather than qc.
824 (CC): Define as @CC@.
825 (CFLAGS): Set to @CFLAGS@.
826 (@host_makefile_frag@): Remove.
827 (config.status): Remove dependency upon @frags@.
829 * configure.in: ../bfd/config.bfd now just sets shell variables.
830 Use them rather than looking through target Makefile fragments.
831 * configure: Rebuild.
833 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
835 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
837 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
839 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
840 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
843 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
844 (lookup_{name,value}): New functions.
845 (prefetch_table): New static local.
846 (sparc_{encode,decode}_prefetch): New functions.
847 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
849 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
851 * sh-opc.h: Add blank lines to improve readabililty of sh3e
854 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
856 * sh-dis.c: Correct comment on first line of file.
858 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
860 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
862 * sparc-opc.c (asi, membar): New static locals.
863 (sparc_{encode,decode}_{asi,membar}): New functions.
864 (sparc_opcodes, membar insn): Fix.
865 * sparc-dis.c (print_insn): Call sparc_decode_asi.
866 Support decoding of membar masks.
869 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
871 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
873 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
875 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
876 and likewise for the other branches. Add bhs as an alias for bcc,
877 and likewise for the size variants. Add dbhs as an alias for
880 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
882 * sh-opc.h (FP sts instructions): Update to match reality.
884 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
886 * m68k-dis.c: (fpcr_names): Add % before all register names.
887 (reg_names): Likewise.
888 (print_insn_arg): Don't explicitly print % before register names.
889 Add % before register names in static array names. In case 'r',
890 print data registers as `@(Dn)', not `Dn@'. When printing a
891 memory address, don't print @# before it.
892 (print_indexed): Change base_disp and outer_disp from int to
893 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
894 syntax. Sign extend 8 byte displacement correctly.
895 (print_base): Print using MIT syntax. Print zpc when appropriate.
896 Change parameter disp from int to bfd_vma.
898 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
901 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
903 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
904 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
905 * sh-opc.h (sh_arg_type): Add new operand types.
906 (sh_table): Add new opcodes from SH3E Floating Point ISA.
908 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
910 * Makefile.in (distclean): Remove generated file config.h.
912 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
914 * Makefile.in (distclean): Remove generated file config.h.
916 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
918 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
920 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
922 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
923 rather than numopcodes. Use m68k_opcodes rather than removed
924 opcode function. Don't check F_ALIAS.
925 (print_insn_arg): Change first parameter to be const char *.
926 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
927 (m68k-opc.o): New target.
928 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
929 * configure: Rebuild.
931 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
933 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
934 (opcode_bits, opcode_hash_table): New variables.
935 (opcodes_initialized): Renamed from opcodes_sorted.
936 (build_hash_table): New function.
937 (is_delayed_branch): Use hash table.
938 (print_insn): Renamed from print_insn_sparc, made static.
939 Build and use hash table. If !sparc64, ignore sparc64 insns,
940 and vice-versa if sparc64.
941 (print_insn_sparc, print_insn_sparc64): New functions.
942 (compare_opcodes): Move sparc64 opcodes to end.
943 Print commutative insns with constant second.
944 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
946 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
948 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
949 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
950 avoids printing a delay slot in a delay slot.
951 * sh-opc.h (sh_table): Fully bracket last entry.
953 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
955 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
957 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
959 * configure.in: Get host_makefile_frag from ${srcdir}.
961 * configure.in: Autoconfiscated. Check for string[s].h. Create
962 config.h from config.in. Don't set up sysdep.h link.
963 * sysdep.h: New file.
964 * configure, config.in: New files, generated from configure.in.
965 * Makefile.in: Updated to be processed autoconf-style.
966 (distclean): Keep sysdep.h. Remove config.log and config.cache.
967 (Makefile): Depend on config.status.
968 (config.status): New rule.
969 * configure.bat: Update Makefile substitutions.
971 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
973 * mips-opc.c (L1): Define.
974 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
975 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
978 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
980 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
981 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
982 have multiple add units but only a single logical unit.
984 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
985 shifted by 18, without any insertion or extraction function.
986 (insert_cr, extract_cr): Remove.
989 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
991 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
994 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
996 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
999 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1001 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1002 * sh-opc.h: Add copyright.
1004 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1006 * Makefile.in (crunch-m68k): Delete extra target accidentally
1007 checked in a while ago.
1009 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1011 * sh-opc.h (sh_table): Add SH3 support.
1013 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1015 * sh-opc.h: Added bsrf and braf.
1017 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1019 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1020 bogus [ls]fm{ea,fd} patterns.
1022 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1023 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1024 initialize it from memory. Make function static.
1025 (print_insn_{big,little}_arm): New functions.
1026 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1027 the correct endianness.
1030 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1032 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1033 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1036 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1038 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1041 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1043 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1044 17th, so that it builds again using GCC as the compiler.
1046 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1048 * mips-dis.c (print_insn_little_mips): Cast return value from
1049 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1050 expects an unsigned long, and that might be fewer words of
1051 argument storage (e.g., if bfd_vma is long long on a 32-bit
1053 (print_insn_big_mips): Likewise with bfd_getb32 value.
1054 (_print_insn_mips): Now static.
1056 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1058 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1059 gcc memory hog problem with initializer is fixed.
1062 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1064 * arc-opc.c (NULL): Define.
1065 (arc_operands, insn fields u,s): Delete.
1066 (arc_operands, insn fields a,b,c): Mark as signed.
1067 (arc_opcodes): No longer const, links computed at run-time.
1068 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1069 suffixes that affect the insn code.
1070 (arc_opcodes): Resort table to macros are first.
1071 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1072 (arc_opcodes, st [b] entry): Likewise.
1073 (arc_opcodes, st [b,d] entry): Fix mask, value.
1074 (arc_reg_names): Add entries for r29, r30, r31, r60.
1075 (opcode_map, icode_map): New static globals.
1076 (arc_opcode_init_tables): Initialize them.
1077 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1078 (insert_shimmoffset): Signal error if register present.
1080 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1083 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1085 Merge in support for Mac MPW as a host.
1086 (Old change descriptions retained for informational value.)
1088 * mpw-config.in (archname): Compute from the config.
1089 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1091 * mpw-config.in (target_arch): Compute from canonical target.
1092 (m68k, mips, powerpc, sparc): Add architectures.
1093 * mpw-make.in (disassemble.c.o): Add.
1094 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1096 * mpw-config.in (BFD_MACHINES): Set to a default value.
1097 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1099 * mpw-make.in (CSEARCH): Add extra-include to search path.
1101 * mpw-config.in (varargs.h): Don't create.
1102 (sysdep.h): Create using forward-include.
1103 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1105 * mpw-config.in: New file, MPW version of configure.in.
1106 * mpw-make.in: New file, MPW version of Makefile.in.
1109 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1111 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1112 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1113 (print_insn_*): Pass bfd mach number, not opcode version.
1114 * arc-opc.c (arc_get_opcode_mach): New function.
1117 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1119 * alpha-dis.c (print_insn_alpha): Put empty statement after
1122 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1124 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1125 (low_sign_extend): Likewise.
1126 (get_field): Delete unused function.
1127 (set_field, deposit_14, deposit_21): Likewise.
1129 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1131 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1134 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1136 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1138 * alpha-opc.h (OSF_ASMCODE): define
1139 print pal-code names as defined in App C of the
1140 Alpha Architecture Reference Manual
1142 * alpha-dis.c: cleaned up output
1143 print stylized code forms as defined in App A.4.3 of the
1144 Alpha Architecture Reference Manual
1146 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1148 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1150 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1153 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1155 * m68k-dis.c (opcode): New function. Returns address of opcode
1156 table entry given index, even if the opcode table was split to
1157 work around gcc bugs.
1158 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1160 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1161 (reg_names): Now const.
1162 (print_insn_arg): Arrays cacheFieldName and names now const.
1163 (print_indexed): Array scales now const.
1166 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1168 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1169 (print_insn_arc_{host,graphics,audio}): Likewise.
1170 (print_insn): Add prototype.
1171 (arc_get_disassembler): New arg `big_p'. Return little or big
1172 print fn accordingly.
1173 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1174 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1175 (arc_opval_supported): Likewise.
1176 * disassemble.c (disassembler): Pass big endian flag to
1177 arc_get_disassembler.
1180 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1182 * ppc-opc.c: Sort recently added instructions by minor opcode
1183 number within major opcode number.
1185 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1187 * hppa-dis.c: Include libhppa.h.
1189 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1191 * mips-opc.c: Change dli to use M_DLI, and add dla.
1193 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1195 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1198 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1200 * arc-dis.c (arc_get_disassembler): Change argument to int,
1201 one of bfd_mach_arc_xxx. All callers updated.
1204 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1206 * mips-opc.c: Add r4650 mul instruction.
1208 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1210 * mips-opc.c: Add uld and usd macros for unaligned double load and
1213 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1215 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1216 mfdcr, mtdcr, icbt, iccci.
1219 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1221 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1222 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1223 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1224 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1225 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1226 (insert_absaddr): New function.
1228 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1230 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1231 New argument `cpu', pass it to arc_opcode_init_tables.
1232 Document byte order dependencies. Ignore unsupported insns.
1233 (arc_get_disassembler): New function.
1234 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1235 print_insn_arc_audio): New functions.
1236 * arc-opc.c (MULTSHIFT operand): Delete.
1237 (UNSIGNED, SATURATION): New operands.
1238 (mac, mul, mul64, mulu64): New insns.
1239 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1240 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1241 (host,graphics,audio extended and auxiliary regs): Define.
1242 (ss, sc, mh, ml): New suffixes.
1243 (arc_opcode_supported, arc_opval_supported): New functions.
1244 (insert_multshift, extract_multshift): Deleted.
1245 * disassemble.c (disassembler, case bfd_arch_arc): Call
1246 arc_get_disassembler to get disassembler routine.
1249 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1251 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1252 signed char fields to shorts, more portable.
1254 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1256 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1257 char fields as signed chars, since they may have negative values.
1259 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1261 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1262 (mycroft@netbsd.org).
1264 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1266 From "Logg, Ed" <elogg@ea.com>:
1267 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1268 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1271 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1273 * ppc-opc.c: Changes based on patch from David Edelsohn
1274 <edelsohn@mhpcc.edu>.
1275 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1278 (insert_tbr): New static function.
1279 (extract_tbr): New static function.
1280 (XFXFXM_MASK, XFXM): Define.
1281 (XSPRBAT_MASK, XSPRG_MASK): Define.
1282 (powerpc_opcodes): Add instructions to access special registers by
1283 name. Add mtcr and mftbu.
1285 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1287 * mips-opc.c (P3): Define.
1288 (mips_opcodes): Add mad and madu.
1290 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1292 * configure.in: Add W65 support.
1293 * disassemble.c: Likewise.
1294 * w65-opc.h, w65-dis.c: New files.
1296 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1298 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1302 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1304 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1306 * arc-opc.c (extract_reladdr): New function.
1307 (insert_reladdr): Store address right-shifted by 2.
1310 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1312 * mips-opc.c: Add dli as a synonym for li.
1315 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1317 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1319 (extraction fns): Insn argument now array of two words. Return pointer
1320 to value's table entry. All uses changed.
1321 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1322 (insert_multshift, extract_multshift): New fns.
1323 (arc_operands): Add support for cache bypass suffix. Add support for
1324 predefined aux regs. Modifier bits moved to flags field.
1325 (arc_opcodes): Likewise.
1326 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1327 New insn rlc. Update to syntax in programmer's manual.
1328 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1329 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1331 (arc_opcode_init_tables): New argument to indicate cpu type.
1332 (insert_reg): Handle predefined aux regs.
1333 (extract_reg): Likewise.
1334 (lookup_register): New fn.
1335 * arc-dis.c (arc_condition_codes): Deleted.
1336 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1337 Clean up modifier handling. Handle predefined aux regs.
1340 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1342 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1343 print something for reserved opcode values, even if it won't
1346 * mips-dis.c (_print_insn_mips): When initializing, shift right
1347 and mask, to avoid sign extension problems on the Alpha.
1349 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1353 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1355 * configure.in: Add ARC support.
1356 * disassemble.c: Likewise.
1357 * arc-dis.c, arc-opc.c: New files.
1360 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1362 * sh-opc.h (mov.l gbr): Get direction right.
1363 * sh-dis.c (print_insn_shx): New function.
1364 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1365 print opcodes with right byte order.
1367 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1369 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1370 to avoid conflicts with getopt.
1372 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1374 * hppa-dis.c (print_insn_hppa): Read the instruction using
1375 bfd_getb32, so that it works on a little endian or 64 bit host.
1376 Remove unused local variable op.
1378 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1380 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1381 addu does not work correctly if -mips3.
1383 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1385 * a29k-dis.c (print_special): Add special register names defined
1386 on 29030, 29040 and 29050.
1387 (print_insn): Handle new operand type 'I'.
1389 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1391 * Makefile.in (INSTALL): Use top level install.sh script.
1393 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1395 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1396 that it works on a little endian host.
1398 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1400 * configure.in: Use ${config_shell} when running config.bfd.
1402 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1404 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1406 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1408 * a29k-dis.c (print_insn): Print the opcode.
1410 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1412 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1414 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1416 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1418 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1420 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1421 which store a value into memory.
1423 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1425 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1426 * arm-dis.c, arm-opc.h: New files.
1428 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1430 * Makefile.in (ns32k-dis.o): Add dependency.
1431 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1432 string, not as array of chars.
1434 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1436 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1438 * sparc-opc.c: Added sparclite extended FP operations, and
1439 versions of v9 impdep* instructions permitting specification of
1442 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1444 * i960-dis.c (reg_names): Now const.
1445 (struct sparse_tabent): New type, copied from array type in mem
1447 (ctrl): Local static array ctrl_tab now const.
1448 (cobr): Local static array cobr_tab now const.
1449 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1450 static variable mem_tab no longer explicitly initialized. Changed
1451 mem_init to const array of struct sparse_tabent.
1452 (reg): Local static variable reg_tab no longer explicitly
1453 initialized. Changed reg_init to const array of struct
1455 (ea): Local static array scale_tab now const.
1457 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1460 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1462 * configure.bat: the disassember needs to be enabled for
1463 "objdump -d" to work in djgpp.
1465 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1467 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1468 (invalid_float): Enabled general version, doesn't require running
1469 on ns32k host. Changed to take char* argument, and test for
1470 explicitly specified sizes, instead of using sizeof() on host CPU
1472 (INVALID_FLOAT): Cast first argument.
1473 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1474 list_P032, list_M032): Now const.
1475 (optlist, list_search): Made appropriate arguments now point to
1477 (print_insn_arg): Changed static array of one-character-string
1478 pointers into a static const array of characters; fixed sprintf
1479 statement accordingly.
1481 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1483 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1484 from distribution. A ns32k-dis.c from a previous distribution has
1485 been brought up to date and supports the new interface.
1487 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1489 * configure.in: add bfd_ns32k_arch target support.
1491 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1492 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1494 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1496 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1499 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1501 * h8300-dis.c, mips-dis.c: Don't use true and false.
1503 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1505 * configure.in: Change --with-targets to --enable-targets.
1507 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1509 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1510 opcodes to the first instruction with that opcode, to speed
1511 disassembly of large files. From ralphc@pyramid.com (Ralph
1514 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1516 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1518 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1520 * configure.bat: update to latest makefile.in
1522 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1524 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1525 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1526 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1527 slot insn is in a delay slot.
1528 * z8k-opc.h: (resflg): Fix patterns.
1529 * h8500-opc.h Fix CR insn patterns.
1531 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1533 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1534 "cmpl" before POWER versions, so that gas -many uses them.
1536 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1538 * disassemble.c: New file.
1539 * Makefile.in (OFILES): Add disassemble.o.
1540 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1541 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1542 binutils/configure.in.
1544 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1545 opcode being examined.
1547 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1549 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1550 (insert_ral, insert_ram, insert_ras): New functions.
1551 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1552 RAS for store with update.
1554 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1556 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1557 (edelsohn@npac.syr.edu).
1559 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1561 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1564 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1566 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1568 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1570 * ppc-opc.c (powerpc_operands): The signedp field has been
1571 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1572 instead. Add new operand SISIGNOPT.
1573 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1574 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1575 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1578 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1580 * i386-dis.c (struct private): Renamed to dis_private. `private'
1581 is a reserved word for dynix cc.
1583 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1585 * configure.in: Change error message to refer to bfd/config.bfd
1586 rather than bfd/configure.in.
1588 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1590 * ppc-opc.c: Define POWER2 as short alias flag.
1591 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1594 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1596 * i960-dis.c (print_insn_i960): Don't read a second word for
1597 opcodes 0, 1, 2 and 3.
1599 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1601 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1603 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1605 * m68881-ext.c: Removed; no longer used.
1606 * Makefile.in: Changed accordingly.
1608 * m68k-dis.c (ext_format_68881): Don't declare.
1609 (print_insn_m68k): If an instruction uses place 'i', it uses at
1610 least four fixed bytes.
1611 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1612 extended float, convert to double using floatformat_to_double, not
1613 ieee_extended_to_double, and fetch the data before converting it.
1615 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1617 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1618 davidj@ICSI.Berkeley.EDU (David Johnson).
1620 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1622 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1623 PowerPC uses bdnz[l][a].
1625 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1627 * dis-buf.c, i386-dis.c: Include sysdep.h.
1629 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1631 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1633 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1634 by Motorola PowerPC 601 with PPC_OPCODE_601.
1635 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1636 Disassemble Motorola PowerPC 601 instructions as well as normal
1637 PowerPC instructions.
1639 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1641 * i960-dis.c (reg, mem): Just use a static array instead of
1644 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1646 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1647 condition name index if this is for a negated condition.
1649 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1650 Floating point format for 'H' operand is backwards from normal
1651 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1652 operands (fmpyadd and fmpysub), handle bizarre register
1653 translation correctly for single precision format.
1655 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1656 or 'I' operands if the next format specifier is 'M' (fcmp
1657 condition completer).
1659 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1661 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1662 single number giving a bitmask for the MB and ME fields of an M
1663 form instruction. Change NB to accept 32, and turn it into 0;
1664 also turn 0 into 32 when disassembling. Seperated SH from NB.
1665 (insert_mbe, extract_mbe): New functions.
1666 (insert_nb, extract_nb): New functions.
1667 (SC_MASK): Mask out SA and LK bits.
1668 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1669 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1670 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1671 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1672 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1673 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1674 (powerpc_macros): Define table of macro definitions.
1675 (powerpc_num_macros): Define.
1677 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1678 if PPC_OPERAND_NEXT is set.
1680 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1682 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1683 char. Retrieve contents using bfd_getl32 instead of shifting.
1685 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1687 * ppc-opc.c: New file. Opcode table for PowerPC, including
1688 opcodes for POWER (RS/6000).
1689 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1690 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1691 (CFILES): Add ppc-dis.c.
1692 (ppc-dis.o, ppc-opc.o): New targets.
1693 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1695 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1697 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1698 No space before 'u', 'f', or 'N'.
1700 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1702 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1703 farther than we should.
1705 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1707 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1709 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1711 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1713 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1714 needs it, to prevent reading past the end of a section.
1716 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1718 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1719 Removed t,A case for la; always use t,A(b) case.
1721 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1723 From Ted Lemen <mellon@pepper.ncd.com>
1724 * mips-dis.c (print_insn_arg): Handle 'k'.
1725 * mips-opc.c: Make cache use k, not t.
1727 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1729 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1730 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1731 FLOAT_FORMAT_CODE to put out floating point register names.
1733 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1735 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1737 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1739 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1741 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1743 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1744 larger than 32. Moved dsxx32 variants first for disassembler.
1746 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1748 * z8kgen.c, z8k-opc.h: Add full lda information.
1750 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1752 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1753 movb instructions. Any necessary space will be emitted by
1754 the code to handle nullification completers.
1756 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1758 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1760 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1762 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1763 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1765 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1767 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1769 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1771 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1772 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1774 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1776 * m88k-dis.c (m88kdis): comment change. Remove space after
1778 (printop): handle new arg types DEC and XREG for m88110.
1780 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1782 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1783 type for absolute branch addresses. Delete special
1784 "ble" and "be" code in 'W' operand code.
1786 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1788 * mips-opc.c: Set hazard information correctly for branch
1789 likely instructions.
1791 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1793 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1794 info->fprintf_func for printing and info->print_address_func for
1797 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1799 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1801 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1803 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1804 Corrected second case of "b" for disassembler.
1806 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1808 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1809 to BFD swapping routines to correspond to BFD name changes.
1811 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1813 * mips-opc.c: Change div machine instruction to be z,s,t rather
1814 than s,t. Change div macro to be d,v,t rather than d,s,t.
1815 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1816 rem and remu which generates only the corresponding div
1817 instruction. This is for compatibility with the MIPS assembler,
1818 which only generates the simple machine instruction when an
1819 explicit destination of $0 is used.
1820 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1822 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1824 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1825 WR_31 hazard for bal, bgezal, bltzal.
1827 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1829 * hppa-dis.c (print_insn_hppa): Use print function
1830 from within the disassemble_info, not fprintf_filtered.
1832 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1834 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1835 Law, law@cs.utah.edu.)
1837 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1839 * mips-opc.c ("absu"): Removed.
1842 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1844 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1845 Changed hazard information to distinguish between memory load
1846 delays and coprocessor load delays.
1848 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1850 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1852 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1854 * configure.in: Don't pass cpu to config.bfd.
1856 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1858 * m88k-dis.c (m88kdis): Make class unsigned.
1860 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1862 * alpha-dis.c (print_insn_alpha): One branch format case was
1863 missing the instruction name.
1865 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1867 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1868 Add the arch-specific auxiliary files.
1869 (OFILES): Remove the arch-specific auxiliary files
1870 and use BFD_MACHINES instead of DIS_LIBS.
1871 * configure.in: Set BFD_MACHINES based on --with-targets option.
1873 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1875 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1878 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1880 * sparc-opc.c: Change CONST to const to deal with gcc
1881 -Dconst=__const -traditional.
1883 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1885 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1886 coprocessor instructions out of #if 0, and made them use new
1889 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1891 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1893 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1895 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1896 instruction, for use by the disassembler.
1898 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1899 hand-coded sign extensions that depended on 32-bit host ints.
1900 FIXME, we still depend on big-endian host bitfield ordering.
1901 (sparc_print_insn): Set the insn_info_valid field, and the
1902 other fields that describe the instruction being printed.
1904 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1906 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1907 `jmp' instead of just one of them.
1909 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1911 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1912 (fput_fp_reg_r): Renamed from fput_reg_r.
1913 (fput_fp_reg): New function.
1914 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1916 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1918 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1920 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1922 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1924 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1925 don't output a space.
1927 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1929 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1931 * mips-opc.c: New file, containing opcode table from
1932 ../include/opcode/mips.h.
1933 * Makefile.in: Add it.
1935 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1937 * m88k-dis.c: New file, moved in from gdb and changed to use the
1938 new dis-asm.h disassembler interface.
1939 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1940 (m88k-dis.o): New target.
1942 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1944 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1945 argument string const char * to correspond to opcode/mips.h.
1947 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1949 * mips-dis.c: Updated to account for name changes in new version
1951 * Makefile.in: Added header file dependencies.
1953 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1955 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1957 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1959 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1960 extend, rather than shifts.
1962 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1964 * Makefile.in: Undo 15 June change.
1966 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1968 * m68k-dis.c (print_insn_arg): Change return value to byte count
1970 * m68k-dis.c: Re-write to detect invalid operands before
1971 printing anything, so we can handle this the same way we
1972 handle invalid opcodes.
1974 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1976 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1978 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1980 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1983 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1985 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1987 * configure.in: Do make sysdep.h link.
1988 * Makefile.in: Search ../include. Don't search ../bfd.
1990 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1992 Changes from Jeff Law, law@cs.utah.edu:
1993 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1994 Do not print a space before the completers specified by
1997 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1999 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2000 defined, since gdb has been fixed.
2002 Changes from Jeff Law, law@cs.utah.edu:
2003 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2004 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2005 be a *disassemble_info, not a *FILE.
2006 * hppa-dis.c: Support 'd', '!', and 'a'.
2007 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2008 * hppa-dis.c: Delete cases which are no longer needed.
2010 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2012 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2014 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2016 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2019 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2021 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2022 * configure.in: No longer need to configure to get sysdep.h.
2024 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2026 * Patches from Jeffrey Law <law@cs.utah.edu>.
2027 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2028 templates for 1.1 FP computational instructions.
2030 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2032 * h8500-dis.c (print_insn_h8500): Address argument is type
2034 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2037 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2038 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2040 * sparc-dis.c (compare_opcodes): Move static declaration to
2043 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2045 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2046 instruction, remove unimp hack from 'l' argument.
2048 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2050 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2053 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2055 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2056 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2059 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2061 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2062 arrays of string pointers to 2-d arrays of chars, to save
2065 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2067 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2068 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2070 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2072 * hppa-dis.c: New file from Utah, adapted to new disassembler
2074 * Makefile.in: Include it.
2076 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2078 * sh-dis.c, sh-opc.h: New files.
2080 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2082 * alpha-dis.c, alpha-opc.h: New files.
2084 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2086 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2089 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2091 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2093 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2095 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2098 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2100 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2101 and double percent signs a few places.
2103 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2105 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2106 Use info->print_address_func not print_address.
2108 * dis-buf.c (generic_print_address): New function.
2110 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2112 * Makefile.in: Add sparc-dis.c.
2113 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2115 Add `add' instruction to the set that get checked
2116 for a preceding `sethi' in order to print an absolute address.
2117 * (print_insn): Disassembly prefers real instructions.
2118 (is_delayed_branch): Speed up.
2119 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2120 Still missing some float ops, and needs testing.
2121 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2122 F_ALIAS. Use printf, not fprintf, when not passing a file
2124 (compare_opcodes): Check that identical instructions have
2125 identical opcodes, complain otherwise.
2128 * Include reg_names.
2130 Use dis-asm.h/read_memory_func interface.
2132 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2134 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2135 deliberately return non-zero to setjmp from longjmp. Otherwise
2136 this code fails to compile.
2138 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2140 * m68k-dis.c: Fix prototype for fetch_arg().
2142 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2144 * dis-buf.c: New file, for new read_memory_func interface.
2145 Makefile.in (OFILES): Include it.
2146 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2147 Use new read_memory_func interface.
2149 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2151 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2152 * h8500-opc.h: Fix couple of opcodes.
2154 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2156 * Makefile.in: add dvi & installcheck targets
2158 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2160 * Makefile.in: Update for h8500-dis.c.
2162 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2164 * h8500-dis.c, h8500-opc.h: New files
2166 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2168 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2169 ../include/dis-asm.h.
2170 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2171 and ../gdb/m68k-pinsn.c).
2172 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2173 and ../gdb/i386-pinsn.c).
2174 * m68881-ext.c: New file. Moved definition of
2175 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2176 * Makefile.in: Adjust for new files.
2177 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2178 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2179 can be dis-assembled.
2181 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2183 * mips-dis.c (print_insn_arg): Now returns void.
2185 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2187 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2188 files that use the macros.
2190 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2192 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2193 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2194 (CFILES): Added mips-dis.c.
2196 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2198 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2199 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2201 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2203 * Makefile.in: Improve *clean rules.
2204 * configure.in: Allow a default host.
2206 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2208 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2209 files include other sysdep files
2211 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2213 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2215 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2217 * configure.in: For host support, use ../bfd/configure.host
2218 so it stays in sync with the ../bfd/hosts database.
2220 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2222 * configure.in: use cpu-vendor-os triple instead of nested cases
2224 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2226 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2227 *always* the wrong one.
2229 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2231 * z8kgen.c: added copyright info
2233 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2235 * z8k-dis.c (unparse_instr): prettier tabs
2236 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2238 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2240 * configure.in: Add ncr* configuration.
2241 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2242 picayune ANSI compilers happy.
2244 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2246 * configure.in (i386): Make i386 and i486 synonymous for now.
2247 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2249 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2251 * Makefile.in (install): Fix typo.
2253 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2255 * Makefile.in (make): Remove obsolete crud.
2256 (sparc-opc.o): Avoid Sun Make VPATH bug.
2258 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2260 * Makefile.in: since there are no SUBDIRS, remove rule and
2261 references of subdir_do.
2263 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2265 * Makefile.in (install): Get the library name right here too.
2266 Don't install bfd.h, since it's unrelated to this library. No
2267 subdirs to recurse into, either.
2268 (CFILES): The source file has a .c suffix, not .o.
2270 * sparc-opc.c: New file, moved from BFD.
2271 * Makefile.in (OFILES): Build it.
2273 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2275 * z8k-dis.c: fixed forward refferences of some declarations.
2277 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2279 * Makefile.in: get the name of the library right
2281 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2283 * z8k-dis.c: knows how to disassemble z8k stuff
2284 * z8k-opc.h: new file full of z8000 opcodes
2288 version-control: never
projects / deliverable / binutils-gdb.git / blob