2 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
4 * configure: (bfd_d10v_arch) Add new case.
5 * configure.in: (bfd_d10v_arch) Add new case.
6 * d10v-dis.c: New file.
7 * d10v-opc.c: New file.
8 * disassemble.c (disassembler) Add entry for d10v.
11 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
13 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
14 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
16 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
18 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
19 distinguish between variants of the instruction set.
20 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
21 distinguish between variants of the instruction set.
23 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
25 * i386-dis.c (print_insn_i8086): New routine to disassemble using
26 the 8086 instruction set.
27 * i386-dis.c: General cleanups. Make most things static. Add
28 prototypes. Get rid of static variables aflags and dflags. Pass
29 them as args (to almost everything).
31 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
33 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
35 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
37 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
38 if the next arg is marked with SRC_IN_DST. Gross.
40 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
41 we're looking for and find EXR.
43 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
44 if we're looking for KBIT and we don't find it.
46 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
49 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
50 3bit immediate operands.
52 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
54 * Released binutils 2.7.
56 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
57 <kkaempf@progis.ac-net.de>.
59 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
61 * alpha-opc.c: Correct second case of "mov" to use OPRL.
63 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
65 * sparc-dis.c (print_insn_sparclite): New routine to print
66 sparclite instructions.
68 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
70 * m68k-opc.c (m68k_opcodes): Add coldfire support.
72 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
74 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
75 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
76 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
78 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
80 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
81 Use autoconf-set values.
82 (docdir, oldincludedir): Removed.
83 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
85 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
87 * alpha-opc.c: New file.
88 * alpha-opc.h: Remove.
89 * alpha-dis.c: Complete rewrite to use new opcode table.
90 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
91 * configure: Rebuild with autoconf 2.10.
92 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
93 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
95 (alpha-opc.o): New target.
97 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
99 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
100 Set imm_added_to_rs1 even if the source and destination register
103 * sparc-opc.c: Add some two operand forms of the wr instruction.
105 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
107 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
110 * disassemble.c (disassembler): Handle H8/S.
111 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
113 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
115 * sparc-opc.c: Add beq/teq as aliases for be/te.
117 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
118 <sergei@msil.sps.mot.com>.
120 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
122 * makefile.vms: New file.
124 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
126 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
128 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
131 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
133 * i386-dis.c (OP_OFF): Call append_prefix.
135 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
137 * ppc-opc.c (instruction encoding macros): Add explicit casts to
138 unsigned long to silence a warning from the Solaris PowerPC
141 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
143 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
145 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
147 * sparc-dis.c (X_IMM,X_SIMM): New macros.
149 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
150 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
151 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
152 cpush, cpusha, cpull sparclet insns.
154 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
156 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
158 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
160 * sparc-opc.c: Set F_FBR on floating point branch instructions.
161 Set F_FLOAT on other floating point instructions.
163 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
165 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
167 (powerpc_opcodes): Add 860/821 specific SPRs.
169 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
171 * configure.in: Permit --enable-shared to specify a list of
172 directories. Set and substitute BFD_PICLIST.
173 * configure: Rebuild.
174 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
175 uses. Set to @BFD_PICLIST@.
177 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
179 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
180 not "abs", which may be needed for the absolute in something
181 like btst #0,@10:8. Print L_3 immediates separately from other
182 immediates. Change ABSMOV reference to ABS8MEM.
184 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
186 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
187 (current_arch_mask): New static global.
188 (compute_arch_mask): New static function.
189 (print_insn_sparc): Delete sparc_v9_p. New static local
190 current_mach. Resort opcode table if current_mach changes.
191 Generalize "insn not supported" test.
192 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
193 Delete test for v9/!v9.
194 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
196 (brfc): Split into CBR and FBR for coprocessor/fp branches.
197 (brfcx): Renamed to FBRX.
198 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
199 coprocessor mnemonics are not supported on the sparclet).
200 (condf): Renamed to CONDF.
201 (SLCBCC2): Delete F_ALIAS flag.
203 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
205 * sparc-opc.c (sparc_opcodes): rd must be 0 for
206 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
208 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
210 * Makefile.in (config.status): Depend upon BFD VERSION file, so
211 that the shared library version number is set correctly.
213 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
215 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
216 Miles Bader <miles@gnu.ai.mit.edu>.
217 * configure: Rebuild.
219 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
221 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
224 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
226 * configure: Rebuild with autoconf 2.8.
228 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
230 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
231 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
233 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
235 * configure.in: Don't set SHLIB or SHLINK to an empty string,
236 since they appear as targets in Makefile.in.
237 * configure: Rebuild.
239 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
241 * mpw-make.sed: Edit out shared library support bits.
243 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
245 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
246 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
247 (sparc_opcodes): Add sparclet insns.
248 (sparclet_cpreg_table): New static local.
249 (sparc_{encode,decode}_sparclet_cpreg): New functions.
250 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
252 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
254 * i386-dis.c (index16): New static variable.
255 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
257 (OP_indirE): Return result of OP_E.
258 (OP_E): Check for 16 bit addressing mode, and disassemble
259 correctly. Optimised 32 bit case a little. Don't print
260 "(base,index,scale)" when sib specifies only an offset.
262 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
264 * configure.in: Set and substitute SHLIB_DEP.
265 * configure: Rebuild.
266 * Makefile.in (SHLIB_DEP): New variable.
267 (LIBIBERTY_LISTS, BFD_LIST): New variables.
268 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
269 COMMON_SHLIB, add them to piclist with appropriate modifications.
270 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
271 here: just use piclist.
273 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
275 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
276 (print_insn_sparc): Rewrite v9/not-v9 tests.
277 (compare_opcodes): Likewise.
278 * sparc-opc.c (MASK_<ARCH>): Define.
279 (v6,v7,v8,sparclite,v9,v9a): Redefine.
280 (sparclet,v6notv9): Define.
281 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
282 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
284 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
286 * configure.in: Call AC_PROG_CC before configure.host.
287 * configure: Rebuild.
289 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
291 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
293 * i386-dis.c (onebyte_has_modrm): New static array.
294 (twobyte_has_modrm): New static array.
295 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
297 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
299 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
302 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
304 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
307 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
309 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
310 m68010up, not just m68020up | cpu32.
312 * Makefile.in (SONAME): New variable.
313 ($(SHLINK)): Make a link to the transformed name, as well.
314 (stamp-tshlink): New target.
315 (install): Skip stamp-tshlink during install.
317 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
319 * configure.in: Call AC_ARG_PROGRAM.
320 * configure: Rebuild.
321 * Makefile.in (program_transform_name): New variable.
322 (install): Transform library name before installing it.
324 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
326 * i960-dis.c (mem): Add HX dcinva instruction.
328 Support for building as a shared library, based on patches from
329 Alan Modra <alan@spri.levels.unisa.edu.au>:
330 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
331 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
332 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
333 * configure: Rebuild.
334 * Makefile.in (ALLLIBS): New variable.
335 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
336 (COMMON_SHLIB, SHLINK): New variables.
337 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
338 (STAGESTUFF): Remove variable.
339 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
340 (stamp-piclist, piclist): New targets.
341 ($(SHLIB), $(SHLINK)): New targets.
342 ($(OFILES)): Depend upon stamp-picdir.
343 (disassemble.o): Build twice if PICFLAG is set.
344 (MOSTLYCLEAN): Add pic/*.o.
345 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
346 (distclean): Remove pic and stamp-picdir.
347 (install): Install shared libraries.
348 (stamp-picdir): New target.
350 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
352 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
353 Print unknown instruction as "unknown", rather than in hex.
355 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
357 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
359 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
361 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
363 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
365 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
366 when necessary. From Ulrich Drepper
367 <drepper@myware.rz.uni-karlsruhe.de>.
369 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
371 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
372 sparc_num_opcodes. Update architecture enum values.
373 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
374 (sparc_opcode_lookup_arch): New function.
375 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
376 (sparc_opcodes): Add v9a shutdown insn.
378 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
380 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
381 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
383 (print_insn_sparc64): Deleted.
384 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
387 * sparc-opc.c (architecture_pname): Add v9a.
389 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
391 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
392 incorrectly defined as 0x16 when it should be 0x15.
393 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
394 (alpha_insn_set): added cvtst and cvttq float ops. Also added
395 excb (exception barrier) which is defined in the Alpha
396 Architecture Handbook version 2.
397 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
398 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
399 disassembled as or, for example.
401 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
403 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
404 (_print_insn_mips): Change i from int to unsigned int.
406 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
408 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
409 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
411 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
413 * i386-dis.c: Added Pentium Pro instructions.
415 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
417 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
420 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
422 * sh-opc.h (sh_nibble_type): Added REG_B.
423 (sh_arg_type): Added A_REG_B.
424 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
426 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
428 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
430 * disassemble.c (disassembler): Use new bfd_big_endian macro.
432 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
434 * Makefile.in (distclean): Remove stamp-h. From Ronald
435 F. Guilmette <rfg@monkeys.com>.
437 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
439 From David Mosberger-Tang <davidm@azstarnet.com>:
440 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
443 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
445 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
446 (sh_table): Added many SH3 opcodes.
447 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
449 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
451 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
452 (subco,subco.): Mark this PPC, not PPCCOM.
454 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
456 * configure: Rebuild with autoconf 2.7.
458 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
460 * configure: Rebuild with autoconf 2.6.
462 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
464 * configure.in: Sort list of architectures. Accept but do nothing
465 for alliant, convex, pyramid, romp, and tahoe.
467 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
469 * a29k-dis.c (print_special): Change num to unsigned int.
471 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
473 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
476 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
478 * configure.in: Call AC_CHECK_PROG to find and cache AR.
479 * configure: Rebuilt.
481 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
483 * configure.in: Add case for bfd_i860_arch.
484 * configure: Rebuild.
486 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
488 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
489 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
490 (NEXTDOUBLE): Likewise.
491 (print_insn_m68k): Don't match fmoveml if there is more than one
492 register in the list.
493 (print_insn_arg): Handle a place of '8' for a type of 'L'.
495 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
497 * m68k-opc.c: Use #W rather than #w.
498 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
500 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
502 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
503 and likewise for all the dbxx opcodes.
505 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
507 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
509 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
511 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
512 the VR4100 specific instructions to the mips_opcodes structure.
514 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
516 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
517 ugly Metrowerks bug in CW6, is fixed in CW7.
519 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
521 * ppc-opc.c (whole file): Add flags for common/any support.
523 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
525 * Makefile.in (BISON): Remove macro.
526 (FLAGS_TO_PASS): Remove BISON.
528 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
530 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
532 * m68k-dis.c (print_insn_m68k): Recognize all two-word
533 instructions that take no args by looking at the match mask.
534 (print_insn_arg): Always print "%" before register names.
535 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
536 [case '_']: Don't print "@#" before address.
537 [case 'J']: Use "%s" as format string, not register name.
538 [case 'B']: Treat place == 'C' like 'l' and 'L'.
540 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
542 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
545 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
547 From David Mosberger-Tang <davidm@azstarnet.com>
549 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
550 (alpha_insn_set): added definitions for VAX floating point
551 instructions (Unix compilers don't generate these, but handcoded
552 assembly might still use them).
554 * alpha-dis.c (print_insn_alpha): added support for disassembling
555 the miscellaneous instructions in the Alpha instruction set.
557 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
559 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
560 no longer create sysdep.h, sed ppc-opc.c to work around a
561 serious Metrowerks C bug.
562 * mpw-make.in: Remove.
563 * mpw-make.sed: New file, used by mpw-configure to edit
564 Makefile.in into an MPW makefile.
566 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
568 * Makefile.in (maintainer-clean): New synonym for realclean.
570 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
572 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
573 which use '0', '1', and '2' instead. Specify the proper size for
574 a pmove immediate operand. Correct the pmovefd patterns to be
575 moves to a register, not from a register.
576 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
578 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
580 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
581 %psr, %wim, %tbr as F_NOTV9.
583 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
585 * Makefile.in (Makefile): Just rebuild Makefile when running
587 (config.h, stamp-h): New targets.
588 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
589 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
591 * configure: Rebuild.
593 * mips-opc.c: Change unaligned loads and stores with "t,A"
594 operands to use "t,A(b)".
596 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
598 * sh-dis.c (print_insn_shx): Add F_FR0 support.
600 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
602 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
603 until 3 instead of until 2.
605 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
607 * Makefile.in (ALL_CFLAGS): Define.
608 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
609 (MOSTLYCLEAN): Add config.log.
610 (distclean): Don't remove config.log.
611 * configure.in: Substitute HDEFINES.
612 * configure: Rebuild.
614 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
616 * sh-opc.h (sh_arg_type): Add F_FR0.
617 (sh_table, case fmac): Add F_FR0 as first argument.
619 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
621 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
623 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
625 * sparc-dis.c: Remove all references to NO_V9.
627 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
629 * aclocal.m4: Just include ../bfd/aclocal.m4.
630 * configure: Rebuild.
632 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
634 * sparc-dis.c (X_DISP19): Define.
635 (print_insn, case 'G'): Use it.
636 (print_insn, case 'L'): Sign extend displacement.
638 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
640 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
641 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
642 host_makefile_frag or frags.
643 * aclocal.m4: New file.
644 * configure: Rebuild.
645 * Makefile.in (INSTALL): Set to @INSTALL@.
646 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
647 (INSTALL_DATA): Set to @INSTALL_DATA@.
649 (AR_FLAGS): Set to rc rather than qc.
650 (CC): Define as @CC@.
651 (CFLAGS): Set to @CFLAGS@.
652 (@host_makefile_frag@): Remove.
653 (config.status): Remove dependency upon @frags@.
655 * configure.in: ../bfd/config.bfd now just sets shell variables.
656 Use them rather than looking through target Makefile fragments.
657 * configure: Rebuild.
659 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
661 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
663 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
665 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
666 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
669 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
670 (lookup_{name,value}): New functions.
671 (prefetch_table): New static local.
672 (sparc_{encode,decode}_prefetch): New functions.
673 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
675 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
677 * sh-opc.h: Add blank lines to improve readabililty of sh3e
680 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
682 * sh-dis.c: Correct comment on first line of file.
684 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
686 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
688 * sparc-opc.c (asi, membar): New static locals.
689 (sparc_{encode,decode}_{asi,membar}): New functions.
690 (sparc_opcodes, membar insn): Fix.
691 * sparc-dis.c (print_insn): Call sparc_decode_asi.
692 Support decoding of membar masks.
695 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
697 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
699 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
701 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
702 and likewise for the other branches. Add bhs as an alias for bcc,
703 and likewise for the size variants. Add dbhs as an alias for
706 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
708 * sh-opc.h (FP sts instructions): Update to match reality.
710 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
712 * m68k-dis.c: (fpcr_names): Add % before all register names.
713 (reg_names): Likewise.
714 (print_insn_arg): Don't explicitly print % before register names.
715 Add % before register names in static array names. In case 'r',
716 print data registers as `@(Dn)', not `Dn@'. When printing a
717 memory address, don't print @# before it.
718 (print_indexed): Change base_disp and outer_disp from int to
719 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
720 syntax. Sign extend 8 byte displacement correctly.
721 (print_base): Print using MIT syntax. Print zpc when appropriate.
722 Change parameter disp from int to bfd_vma.
724 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
727 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
729 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
730 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
731 * sh-opc.h (sh_arg_type): Add new operand types.
732 (sh_table): Add new opcodes from SH3E Floating Point ISA.
734 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
736 * Makefile.in (distclean): Remove generated file config.h.
738 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
740 * Makefile.in (distclean): Remove generated file config.h.
742 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
744 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
746 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
748 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
749 rather than numopcodes. Use m68k_opcodes rather than removed
750 opcode function. Don't check F_ALIAS.
751 (print_insn_arg): Change first parameter to be const char *.
752 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
753 (m68k-opc.o): New target.
754 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
755 * configure: Rebuild.
757 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
759 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
760 (opcode_bits, opcode_hash_table): New variables.
761 (opcodes_initialized): Renamed from opcodes_sorted.
762 (build_hash_table): New function.
763 (is_delayed_branch): Use hash table.
764 (print_insn): Renamed from print_insn_sparc, made static.
765 Build and use hash table. If !sparc64, ignore sparc64 insns,
766 and vice-versa if sparc64.
767 (print_insn_sparc, print_insn_sparc64): New functions.
768 (compare_opcodes): Move sparc64 opcodes to end.
769 Print commutative insns with constant second.
770 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
772 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
774 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
775 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
776 avoids printing a delay slot in a delay slot.
777 * sh-opc.h (sh_table): Fully bracket last entry.
779 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
781 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
783 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
785 * configure.in: Get host_makefile_frag from ${srcdir}.
787 * configure.in: Autoconfiscated. Check for string[s].h. Create
788 config.h from config.in. Don't set up sysdep.h link.
789 * sysdep.h: New file.
790 * configure, config.in: New files, generated from configure.in.
791 * Makefile.in: Updated to be processed autoconf-style.
792 (distclean): Keep sysdep.h. Remove config.log and config.cache.
793 (Makefile): Depend on config.status.
794 (config.status): New rule.
795 * configure.bat: Update Makefile substitutions.
797 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
799 * mips-opc.c (L1): Define.
800 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
801 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
804 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
806 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
807 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
808 have multiple add units but only a single logical unit.
810 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
811 shifted by 18, without any insertion or extraction function.
812 (insert_cr, extract_cr): Remove.
815 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
817 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
820 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
822 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
825 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
827 * mpw-config.in: Add sh and i386 configs, remove sparc config.
828 * sh-opc.h: Add copyright.
830 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
832 * Makefile.in (crunch-m68k): Delete extra target accidentally
833 checked in a while ago.
835 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
837 * sh-opc.h (sh_table): Add SH3 support.
839 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
841 * sh-opc.h: Added bsrf and braf.
843 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
845 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
846 bogus [ls]fm{ea,fd} patterns.
848 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
849 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
850 initialize it from memory. Make function static.
851 (print_insn_{big,little}_arm): New functions.
852 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
853 the correct endianness.
856 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
858 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
859 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
862 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
864 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
867 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
869 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
870 17th, so that it builds again using GCC as the compiler.
872 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
874 * mips-dis.c (print_insn_little_mips): Cast return value from
875 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
876 expects an unsigned long, and that might be fewer words of
877 argument storage (e.g., if bfd_vma is long long on a 32-bit
879 (print_insn_big_mips): Likewise with bfd_getb32 value.
880 (_print_insn_mips): Now static.
882 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
884 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
885 gcc memory hog problem with initializer is fixed.
888 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
890 * arc-opc.c (NULL): Define.
891 (arc_operands, insn fields u,s): Delete.
892 (arc_operands, insn fields a,b,c): Mark as signed.
893 (arc_opcodes): No longer const, links computed at run-time.
894 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
895 suffixes that affect the insn code.
896 (arc_opcodes): Resort table to macros are first.
897 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
898 (arc_opcodes, st [b] entry): Likewise.
899 (arc_opcodes, st [b,d] entry): Fix mask, value.
900 (arc_reg_names): Add entries for r29, r30, r31, r60.
901 (opcode_map, icode_map): New static globals.
902 (arc_opcode_init_tables): Initialize them.
903 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
904 (insert_shimmoffset): Signal error if register present.
906 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
909 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
911 Merge in support for Mac MPW as a host.
912 (Old change descriptions retained for informational value.)
914 * mpw-config.in (archname): Compute from the config.
915 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
917 * mpw-config.in (target_arch): Compute from canonical target.
918 (m68k, mips, powerpc, sparc): Add architectures.
919 * mpw-make.in (disassemble.c.o): Add.
920 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
922 * mpw-config.in (BFD_MACHINES): Set to a default value.
923 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
925 * mpw-make.in (CSEARCH): Add extra-include to search path.
927 * mpw-config.in (varargs.h): Don't create.
928 (sysdep.h): Create using forward-include.
929 * mpw-make.in (CSEARCH): Add include/mpw to search path.
931 * mpw-config.in: New file, MPW version of configure.in.
932 * mpw-make.in: New file, MPW version of Makefile.in.
935 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
937 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
938 Call arc_get_opcode_mach to map bfd mach number to opcode value.
939 (print_insn_*): Pass bfd mach number, not opcode version.
940 * arc-opc.c (arc_get_opcode_mach): New function.
943 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
945 * alpha-dis.c (print_insn_alpha): Put empty statement after
948 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
950 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
951 (low_sign_extend): Likewise.
952 (get_field): Delete unused function.
953 (set_field, deposit_14, deposit_21): Likewise.
955 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
957 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
960 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
962 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
964 * alpha-opc.h (OSF_ASMCODE): define
965 print pal-code names as defined in App C of the
966 Alpha Architecture Reference Manual
968 * alpha-dis.c: cleaned up output
969 print stylized code forms as defined in App A.4.3 of the
970 Alpha Architecture Reference Manual
972 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
974 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
976 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
979 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
981 * m68k-dis.c (opcode): New function. Returns address of opcode
982 table entry given index, even if the opcode table was split to
983 work around gcc bugs.
984 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
986 (BREAK_UP_BIG_DECL): Make secondary array static and const.
987 (reg_names): Now const.
988 (print_insn_arg): Arrays cacheFieldName and names now const.
989 (print_indexed): Array scales now const.
992 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
994 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
995 (print_insn_arc_{host,graphics,audio}): Likewise.
996 (print_insn): Add prototype.
997 (arc_get_disassembler): New arg `big_p'. Return little or big
998 print fn accordingly.
999 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1000 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1001 (arc_opval_supported): Likewise.
1002 * disassemble.c (disassembler): Pass big endian flag to
1003 arc_get_disassembler.
1006 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1008 * ppc-opc.c: Sort recently added instructions by minor opcode
1009 number within major opcode number.
1011 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1013 * hppa-dis.c: Include libhppa.h.
1015 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1017 * mips-opc.c: Change dli to use M_DLI, and add dla.
1019 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1021 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1024 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1026 * arc-dis.c (arc_get_disassembler): Change argument to int,
1027 one of bfd_mach_arc_xxx. All callers updated.
1030 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1032 * mips-opc.c: Add r4650 mul instruction.
1034 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1036 * mips-opc.c: Add uld and usd macros for unaligned double load and
1039 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1041 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1042 mfdcr, mtdcr, icbt, iccci.
1045 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1047 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1048 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1049 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1050 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1051 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1052 (insert_absaddr): New function.
1054 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1056 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1057 New argument `cpu', pass it to arc_opcode_init_tables.
1058 Document byte order dependencies. Ignore unsupported insns.
1059 (arc_get_disassembler): New function.
1060 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1061 print_insn_arc_audio): New functions.
1062 * arc-opc.c (MULTSHIFT operand): Delete.
1063 (UNSIGNED, SATURATION): New operands.
1064 (mac, mul, mul64, mulu64): New insns.
1065 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1066 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1067 (host,graphics,audio extended and auxiliary regs): Define.
1068 (ss, sc, mh, ml): New suffixes.
1069 (arc_opcode_supported, arc_opval_supported): New functions.
1070 (insert_multshift, extract_multshift): Deleted.
1071 * disassemble.c (disassembler, case bfd_arch_arc): Call
1072 arc_get_disassembler to get disassembler routine.
1075 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1077 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1078 signed char fields to shorts, more portable.
1080 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1082 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1083 char fields as signed chars, since they may have negative values.
1085 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1087 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1088 (mycroft@netbsd.org).
1090 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1092 From "Logg, Ed" <elogg@ea.com>:
1093 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1094 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1097 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1099 * ppc-opc.c: Changes based on patch from David Edelsohn
1100 <edelsohn@mhpcc.edu>.
1101 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1104 (insert_tbr): New static function.
1105 (extract_tbr): New static function.
1106 (XFXFXM_MASK, XFXM): Define.
1107 (XSPRBAT_MASK, XSPRG_MASK): Define.
1108 (powerpc_opcodes): Add instructions to access special registers by
1109 name. Add mtcr and mftbu.
1111 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1113 * mips-opc.c (P3): Define.
1114 (mips_opcodes): Add mad and madu.
1116 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1118 * configure.in: Add W65 support.
1119 * disassemble.c: Likewise.
1120 * w65-opc.h, w65-dis.c: New files.
1122 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1124 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1128 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1130 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1132 * arc-opc.c (extract_reladdr): New function.
1133 (insert_reladdr): Store address right-shifted by 2.
1136 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1138 * mips-opc.c: Add dli as a synonym for li.
1141 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1143 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1145 (extraction fns): Insn argument now array of two words. Return pointer
1146 to value's table entry. All uses changed.
1147 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1148 (insert_multshift, extract_multshift): New fns.
1149 (arc_operands): Add support for cache bypass suffix. Add support for
1150 predefined aux regs. Modifier bits moved to flags field.
1151 (arc_opcodes): Likewise.
1152 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1153 New insn rlc. Update to syntax in programmer's manual.
1154 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1155 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1157 (arc_opcode_init_tables): New argument to indicate cpu type.
1158 (insert_reg): Handle predefined aux regs.
1159 (extract_reg): Likewise.
1160 (lookup_register): New fn.
1161 * arc-dis.c (arc_condition_codes): Deleted.
1162 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1163 Clean up modifier handling. Handle predefined aux regs.
1166 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1168 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1169 print something for reserved opcode values, even if it won't
1172 * mips-dis.c (_print_insn_mips): When initializing, shift right
1173 and mask, to avoid sign extension problems on the Alpha.
1175 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1179 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1181 * configure.in: Add ARC support.
1182 * disassemble.c: Likewise.
1183 * arc-dis.c, arc-opc.c: New files.
1186 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1188 * sh-opc.h (mov.l gbr): Get direction right.
1189 * sh-dis.c (print_insn_shx): New function.
1190 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1191 print opcodes with right byte order.
1193 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1195 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1196 to avoid conflicts with getopt.
1198 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1200 * hppa-dis.c (print_insn_hppa): Read the instruction using
1201 bfd_getb32, so that it works on a little endian or 64 bit host.
1202 Remove unused local variable op.
1204 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1206 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1207 addu does not work correctly if -mips3.
1209 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1211 * a29k-dis.c (print_special): Add special register names defined
1212 on 29030, 29040 and 29050.
1213 (print_insn): Handle new operand type 'I'.
1215 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1217 * Makefile.in (INSTALL): Use top level install.sh script.
1219 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1221 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1222 that it works on a little endian host.
1224 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1226 * configure.in: Use ${config_shell} when running config.bfd.
1228 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1230 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1232 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1234 * a29k-dis.c (print_insn): Print the opcode.
1236 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1238 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1240 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1242 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1244 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1246 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1247 which store a value into memory.
1249 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1251 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1252 * arm-dis.c, arm-opc.h: New files.
1254 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1256 * Makefile.in (ns32k-dis.o): Add dependency.
1257 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1258 string, not as array of chars.
1260 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1262 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1264 * sparc-opc.c: Added sparclite extended FP operations, and
1265 versions of v9 impdep* instructions permitting specification of
1268 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1270 * i960-dis.c (reg_names): Now const.
1271 (struct sparse_tabent): New type, copied from array type in mem
1273 (ctrl): Local static array ctrl_tab now const.
1274 (cobr): Local static array cobr_tab now const.
1275 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1276 static variable mem_tab no longer explicitly initialized. Changed
1277 mem_init to const array of struct sparse_tabent.
1278 (reg): Local static variable reg_tab no longer explicitly
1279 initialized. Changed reg_init to const array of struct
1281 (ea): Local static array scale_tab now const.
1283 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1286 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1288 * configure.bat: the disassember needs to be enabled for
1289 "objdump -d" to work in djgpp.
1291 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1293 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1294 (invalid_float): Enabled general version, doesn't require running
1295 on ns32k host. Changed to take char* argument, and test for
1296 explicitly specified sizes, instead of using sizeof() on host CPU
1298 (INVALID_FLOAT): Cast first argument.
1299 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1300 list_P032, list_M032): Now const.
1301 (optlist, list_search): Made appropriate arguments now point to
1303 (print_insn_arg): Changed static array of one-character-string
1304 pointers into a static const array of characters; fixed sprintf
1305 statement accordingly.
1307 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1309 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1310 from distribution. A ns32k-dis.c from a previous distribution has
1311 been brought up to date and supports the new interface.
1313 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1315 * configure.in: add bfd_ns32k_arch target support.
1317 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1318 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1320 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1322 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1325 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1327 * h8300-dis.c, mips-dis.c: Don't use true and false.
1329 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1331 * configure.in: Change --with-targets to --enable-targets.
1333 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1335 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1336 opcodes to the first instruction with that opcode, to speed
1337 disassembly of large files. From ralphc@pyramid.com (Ralph
1340 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1342 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1344 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1346 * configure.bat: update to latest makefile.in
1348 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1350 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1351 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1352 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1353 slot insn is in a delay slot.
1354 * z8k-opc.h: (resflg): Fix patterns.
1355 * h8500-opc.h Fix CR insn patterns.
1357 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1359 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1360 "cmpl" before POWER versions, so that gas -many uses them.
1362 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1364 * disassemble.c: New file.
1365 * Makefile.in (OFILES): Add disassemble.o.
1366 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1367 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1368 binutils/configure.in.
1370 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1371 opcode being examined.
1373 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1375 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1376 (insert_ral, insert_ram, insert_ras): New functions.
1377 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1378 RAS for store with update.
1380 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1382 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1383 (edelsohn@npac.syr.edu).
1385 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1387 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1390 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1392 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1394 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1396 * ppc-opc.c (powerpc_operands): The signedp field has been
1397 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1398 instead. Add new operand SISIGNOPT.
1399 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1400 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1401 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1404 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1406 * i386-dis.c (struct private): Renamed to dis_private. `private'
1407 is a reserved word for dynix cc.
1409 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1411 * configure.in: Change error message to refer to bfd/config.bfd
1412 rather than bfd/configure.in.
1414 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1416 * ppc-opc.c: Define POWER2 as short alias flag.
1417 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1420 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1422 * i960-dis.c (print_insn_i960): Don't read a second word for
1423 opcodes 0, 1, 2 and 3.
1425 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1427 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1429 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1431 * m68881-ext.c: Removed; no longer used.
1432 * Makefile.in: Changed accordingly.
1434 * m68k-dis.c (ext_format_68881): Don't declare.
1435 (print_insn_m68k): If an instruction uses place 'i', it uses at
1436 least four fixed bytes.
1437 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1438 extended float, convert to double using floatformat_to_double, not
1439 ieee_extended_to_double, and fetch the data before converting it.
1441 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1443 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1444 davidj@ICSI.Berkeley.EDU (David Johnson).
1446 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1448 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1449 PowerPC uses bdnz[l][a].
1451 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1453 * dis-buf.c, i386-dis.c: Include sysdep.h.
1455 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1457 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1459 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1460 by Motorola PowerPC 601 with PPC_OPCODE_601.
1461 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1462 Disassemble Motorola PowerPC 601 instructions as well as normal
1463 PowerPC instructions.
1465 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1467 * i960-dis.c (reg, mem): Just use a static array instead of
1470 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1472 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1473 condition name index if this is for a negated condition.
1475 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1476 Floating point format for 'H' operand is backwards from normal
1477 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1478 operands (fmpyadd and fmpysub), handle bizarre register
1479 translation correctly for single precision format.
1481 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1482 or 'I' operands if the next format specifier is 'M' (fcmp
1483 condition completer).
1485 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1487 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1488 single number giving a bitmask for the MB and ME fields of an M
1489 form instruction. Change NB to accept 32, and turn it into 0;
1490 also turn 0 into 32 when disassembling. Seperated SH from NB.
1491 (insert_mbe, extract_mbe): New functions.
1492 (insert_nb, extract_nb): New functions.
1493 (SC_MASK): Mask out SA and LK bits.
1494 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1495 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1496 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1497 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1498 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1499 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1500 (powerpc_macros): Define table of macro definitions.
1501 (powerpc_num_macros): Define.
1503 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1504 if PPC_OPERAND_NEXT is set.
1506 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1508 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1509 char. Retrieve contents using bfd_getl32 instead of shifting.
1511 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1513 * ppc-opc.c: New file. Opcode table for PowerPC, including
1514 opcodes for POWER (RS/6000).
1515 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1516 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1517 (CFILES): Add ppc-dis.c.
1518 (ppc-dis.o, ppc-opc.o): New targets.
1519 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1521 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1523 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1524 No space before 'u', 'f', or 'N'.
1526 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1528 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1529 farther than we should.
1531 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1533 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1535 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1537 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1539 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1540 needs it, to prevent reading past the end of a section.
1542 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1544 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1545 Removed t,A case for la; always use t,A(b) case.
1547 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1549 From Ted Lemen <mellon@pepper.ncd.com>
1550 * mips-dis.c (print_insn_arg): Handle 'k'.
1551 * mips-opc.c: Make cache use k, not t.
1553 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1555 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1556 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1557 FLOAT_FORMAT_CODE to put out floating point register names.
1559 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1561 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1563 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1565 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1567 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1569 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1570 larger than 32. Moved dsxx32 variants first for disassembler.
1572 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1574 * z8kgen.c, z8k-opc.h: Add full lda information.
1576 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1578 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1579 movb instructions. Any necessary space will be emitted by
1580 the code to handle nullification completers.
1582 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1584 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1586 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1588 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1589 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1591 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1593 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1595 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1597 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1598 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1600 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1602 * m88k-dis.c (m88kdis): comment change. Remove space after
1604 (printop): handle new arg types DEC and XREG for m88110.
1606 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1608 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1609 type for absolute branch addresses. Delete special
1610 "ble" and "be" code in 'W' operand code.
1612 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1614 * mips-opc.c: Set hazard information correctly for branch
1615 likely instructions.
1617 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1619 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1620 info->fprintf_func for printing and info->print_address_func for
1623 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1625 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1627 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1629 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1630 Corrected second case of "b" for disassembler.
1632 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1634 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1635 to BFD swapping routines to correspond to BFD name changes.
1637 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1639 * mips-opc.c: Change div machine instruction to be z,s,t rather
1640 than s,t. Change div macro to be d,v,t rather than d,s,t.
1641 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1642 rem and remu which generates only the corresponding div
1643 instruction. This is for compatibility with the MIPS assembler,
1644 which only generates the simple machine instruction when an
1645 explicit destination of $0 is used.
1646 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1648 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1650 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1651 WR_31 hazard for bal, bgezal, bltzal.
1653 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1655 * hppa-dis.c (print_insn_hppa): Use print function
1656 from within the disassemble_info, not fprintf_filtered.
1658 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1660 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1661 Law, law@cs.utah.edu.)
1663 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1665 * mips-opc.c ("absu"): Removed.
1668 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1670 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1671 Changed hazard information to distinguish between memory load
1672 delays and coprocessor load delays.
1674 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1676 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1678 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1680 * configure.in: Don't pass cpu to config.bfd.
1682 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1684 * m88k-dis.c (m88kdis): Make class unsigned.
1686 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1688 * alpha-dis.c (print_insn_alpha): One branch format case was
1689 missing the instruction name.
1691 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1693 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1694 Add the arch-specific auxiliary files.
1695 (OFILES): Remove the arch-specific auxiliary files
1696 and use BFD_MACHINES instead of DIS_LIBS.
1697 * configure.in: Set BFD_MACHINES based on --with-targets option.
1699 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1701 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1704 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1706 * sparc-opc.c: Change CONST to const to deal with gcc
1707 -Dconst=__const -traditional.
1709 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1711 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1712 coprocessor instructions out of #if 0, and made them use new
1715 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1717 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1719 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1721 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1722 instruction, for use by the disassembler.
1724 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1725 hand-coded sign extensions that depended on 32-bit host ints.
1726 FIXME, we still depend on big-endian host bitfield ordering.
1727 (sparc_print_insn): Set the insn_info_valid field, and the
1728 other fields that describe the instruction being printed.
1730 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1732 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1733 `jmp' instead of just one of them.
1735 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1737 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1738 (fput_fp_reg_r): Renamed from fput_reg_r.
1739 (fput_fp_reg): New function.
1740 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1742 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1744 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1746 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1748 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1750 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1751 don't output a space.
1753 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1755 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1757 * mips-opc.c: New file, containing opcode table from
1758 ../include/opcode/mips.h.
1759 * Makefile.in: Add it.
1761 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1763 * m88k-dis.c: New file, moved in from gdb and changed to use the
1764 new dis-asm.h disassembler interface.
1765 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1766 (m88k-dis.o): New target.
1768 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1770 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1771 argument string const char * to correspond to opcode/mips.h.
1773 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1775 * mips-dis.c: Updated to account for name changes in new version
1777 * Makefile.in: Added header file dependencies.
1779 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1781 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1783 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1785 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1786 extend, rather than shifts.
1788 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1790 * Makefile.in: Undo 15 June change.
1792 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1794 * m68k-dis.c (print_insn_arg): Change return value to byte count
1796 * m68k-dis.c: Re-write to detect invalid operands before
1797 printing anything, so we can handle this the same way we
1798 handle invalid opcodes.
1800 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1802 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1804 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1806 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1809 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1811 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1813 * configure.in: Do make sysdep.h link.
1814 * Makefile.in: Search ../include. Don't search ../bfd.
1816 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1818 Changes from Jeff Law, law@cs.utah.edu:
1819 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1820 Do not print a space before the completers specified by
1823 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1825 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1826 defined, since gdb has been fixed.
1828 Changes from Jeff Law, law@cs.utah.edu:
1829 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1830 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1831 be a *disassemble_info, not a *FILE.
1832 * hppa-dis.c: Support 'd', '!', and 'a'.
1833 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1834 * hppa-dis.c: Delete cases which are no longer needed.
1836 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1838 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1840 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1842 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1845 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1847 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1848 * configure.in: No longer need to configure to get sysdep.h.
1850 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1852 * Patches from Jeffrey Law <law@cs.utah.edu>.
1853 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1854 templates for 1.1 FP computational instructions.
1856 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1858 * h8500-dis.c (print_insn_h8500): Address argument is type
1860 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1863 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1864 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1866 * sparc-dis.c (compare_opcodes): Move static declaration to
1869 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1871 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1872 instruction, remove unimp hack from 'l' argument.
1874 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1876 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1879 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1881 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1882 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1885 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1887 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1888 arrays of string pointers to 2-d arrays of chars, to save
1891 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1893 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1894 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1896 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1898 * hppa-dis.c: New file from Utah, adapted to new disassembler
1900 * Makefile.in: Include it.
1902 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1904 * sh-dis.c, sh-opc.h: New files.
1906 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1908 * alpha-dis.c, alpha-opc.h: New files.
1910 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1912 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1915 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1917 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1919 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1921 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1924 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1926 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1927 and double percent signs a few places.
1929 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1931 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1932 Use info->print_address_func not print_address.
1934 * dis-buf.c (generic_print_address): New function.
1936 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1938 * Makefile.in: Add sparc-dis.c.
1939 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1941 Add `add' instruction to the set that get checked
1942 for a preceding `sethi' in order to print an absolute address.
1943 * (print_insn): Disassembly prefers real instructions.
1944 (is_delayed_branch): Speed up.
1945 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1946 Still missing some float ops, and needs testing.
1947 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1948 F_ALIAS. Use printf, not fprintf, when not passing a file
1950 (compare_opcodes): Check that identical instructions have
1951 identical opcodes, complain otherwise.
1954 * Include reg_names.
1956 Use dis-asm.h/read_memory_func interface.
1958 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1960 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1961 deliberately return non-zero to setjmp from longjmp. Otherwise
1962 this code fails to compile.
1964 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1966 * m68k-dis.c: Fix prototype for fetch_arg().
1968 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1970 * dis-buf.c: New file, for new read_memory_func interface.
1971 Makefile.in (OFILES): Include it.
1972 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1973 Use new read_memory_func interface.
1975 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1977 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1978 * h8500-opc.h: Fix couple of opcodes.
1980 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1982 * Makefile.in: add dvi & installcheck targets
1984 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1986 * Makefile.in: Update for h8500-dis.c.
1988 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1990 * h8500-dis.c, h8500-opc.h: New files
1992 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1994 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1995 ../include/dis-asm.h.
1996 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1997 and ../gdb/m68k-pinsn.c).
1998 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1999 and ../gdb/i386-pinsn.c).
2000 * m68881-ext.c: New file. Moved definition of
2001 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2002 * Makefile.in: Adjust for new files.
2003 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2004 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2005 can be dis-assembled.
2007 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2009 * mips-dis.c (print_insn_arg): Now returns void.
2011 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2013 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2014 files that use the macros.
2016 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2018 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2019 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2020 (CFILES): Added mips-dis.c.
2022 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2024 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2025 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2027 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2029 * Makefile.in: Improve *clean rules.
2030 * configure.in: Allow a default host.
2032 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2034 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2035 files include other sysdep files
2037 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2039 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2041 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2043 * configure.in: For host support, use ../bfd/configure.host
2044 so it stays in sync with the ../bfd/hosts database.
2046 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2048 * configure.in: use cpu-vendor-os triple instead of nested cases
2050 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2052 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2053 *always* the wrong one.
2055 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2057 * z8kgen.c: added copyright info
2059 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2061 * z8k-dis.c (unparse_instr): prettier tabs
2062 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2064 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2066 * configure.in: Add ncr* configuration.
2067 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2068 picayune ANSI compilers happy.
2070 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2072 * configure.in (i386): Make i386 and i486 synonymous for now.
2073 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2075 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2077 * Makefile.in (install): Fix typo.
2079 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2081 * Makefile.in (make): Remove obsolete crud.
2082 (sparc-opc.o): Avoid Sun Make VPATH bug.
2084 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2086 * Makefile.in: since there are no SUBDIRS, remove rule and
2087 references of subdir_do.
2089 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2091 * Makefile.in (install): Get the library name right here too.
2092 Don't install bfd.h, since it's unrelated to this library. No
2093 subdirs to recurse into, either.
2094 (CFILES): The source file has a .c suffix, not .o.
2096 * sparc-opc.c: New file, moved from BFD.
2097 * Makefile.in (OFILES): Build it.
2099 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2101 * z8k-dis.c: fixed forward refferences of some declarations.
2103 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2105 * Makefile.in: get the name of the library right
2107 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2109 * z8k-dis.c: knows how to disassemble z8k stuff
2110 * z8k-opc.h: new file full of z8000 opcodes
2114 version-control: never