opcodes/ChangeLog

   1 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
   2
   3         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
   4         due to -many/-Many.
   5         (print_insn_powerpc): Make sure we only deprecate instructions using
   6         the original dialect and not a modified dialect due to -Many handling.
   7         Move the handling of the condition register and default operands to
   8         the end of the if/else if/else chain.
   9         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
  10         instructions from newer processors are listed before older ones.
  11         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
  12         that have instructions with conflicting opcodes.
  13
  14 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
  15
  16         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
  17         E500MC entries.
  18
  19 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
  20
  21         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
  22
  23 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
  24
  25         * arm-dis.c (print_insn): Also check section matches in backwards
  26         search for mapping symbol.
  27
  28 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
  29
  30         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
  31
  32 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
  33
  34         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
  35         * Makefile.am: Run "make dep-am".
  36         * Makefile.in: Regenerate.
  37         * openrisc-opc.c: Regenerate.
  38
  39 2009-03-10  Nick Clifton  <nickc@redhat.com>
  40
  41         * po/id.po: Updated Indonesian translation.
  42
  43 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
  44
  45         * ppc-dis.c: Include "opintl.h".
  46         (struct ppc_mopt, ppc_opts): New.
  47         (ppc_parse_cpu): New function.
  48         (powerpc_init_dialect): Use it.
  49         (print_ppc_disassembler_options): Dump options from ppc_opts.
  50         Internationalize message.
  51
  52 2009-03-06  Nick Clifton  <nickc@redhat.com>
  53
  54         * po/es.po: Updated Spanish translation.
  55
  56 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
  57
  58         PR 6768
  59         * configure.in: Test for ld --as-needed support.  Link shared
  60         libopcodes against libm.
  61         * configure: Regenerate.
  62
  63 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
  64
  65         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
  66         instructions from newer processors are listed before older ones.
  67
  68 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
  69
  70         * Makefile.am: Run "make dep-am".
  71         (HFILES): Move lm32-desc.h and lm32-opc.h from..
  72         (CFILES): ..here.
  73         * Makefile.in: Regenerate.
  74
  75 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
  76
  77         * score7-dis.c: New file.
  78         * Makefile.am: Add dependencies for score7-dis.c.
  79         * Makefile.in: Regenerate.
  80         * configure.in: Add score7-dis to score files.
  81         * configure: Regenerate.
  82         * score-dis.c: Add support for score7 architecture.
  83         * score-opc.h: Likewise.
  84
  85 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  86
  87         * configure: Regenerate.
  88
  89 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
  90
  91         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
  92
  93 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
  94
  95         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
  96         the power7 and the isel instructions.
  97         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
  98         (insert_dm, extract_dm): Likewise.
  99         (XB6): Update comment to include XX2 form.
 100         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
 101         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
 102         (RemoveXX3DM): Delete.
 103         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
 104         "mftgpr">: Deprecate for POWER7.
 105         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
 106         "frsqrte.">: Deprecate the three operand form and enable the two
 107         operand form for POWER7 and later.
 108         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
 109         <"waitsrv", "waitimpl">: Add extended opcodes.
 110         <"ldbrx", "stdbrx">: Enable for POWER7.
 111         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
 112         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
 113         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
 114         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
 115         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
 116         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
 117         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
 118         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
 119         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
 120         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
 121         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
 122         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
 123         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
 124         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
 125         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
 126         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
 127         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
 128         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
 129         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
 130         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
 131         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
 132         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
 133         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
 134         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
 135         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
 136         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
 137         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
 138         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
 139         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
 140         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
 141         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
 142         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
 143         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
 144         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
 145         "xxspltw", "xxswapd">: Add VSX opcodes.
 146
 147 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
 148
 149         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
 150         (operand_types): Remove Vex_Imm4.
 151
 152         * i386-opc.h (Vex_Imm4): Removed.
 153         (OTMax): Updated.
 154         (i386_operand_type): Remove vex_imm4.
 155
 156         * i386-opc.tbl: Remove Vex_Imm4 comments.
 157         * i386-init.h: Regenerated.
 158         * i386-tbl.h: Likewise.
 159
 160 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
 161
 162         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
 163         vq{r}shr{u}n.s64 insnstructions.
 164
 165 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
 166
 167         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
 168         operand to be a float point register (FRT/FRS).
 169
 170 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
 171
 172         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
 173         dmfc2 and dmtc2 before the architecture-level variants.
 174
 175 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
 176
 177         * fr30-opc.c: Regenerate.
 178         * frv-opc.c: Regenerate.
 179         * ip2k-opc.c: Regenerate.
 180         * iq2000-opc.c: Regenerate.
 181         * lm32-opc.c: Regenerate.
 182         * m32c-opc.c: Regenerate.
 183         * m32r-opc.c: Regenerate.
 184         * mep-opc.c: Regenerate.
 185         * mt-opc.c: Regenerate.
 186         * xc16x-opc.c: Regenerate.
 187         * xstormy16-opc.c: Regenerate.
 188         * tic54x-dis.c (print_instruction): Avoid compiler warning on
 189         sprintf call.
 190
 191 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
 192
 193         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
 194
 195 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
 196
 197         * ppc-opc.c: Update copyright year.
 198         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
 199         ordering for POWER4 and later and use the correct Server ordering.
 200
 201 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
 202
 203         AVX Programming Reference (January, 2009)
 204         * i386-dis.c (PREFIX_VEX_3A44): New.
 205         (VEX_LEN_3A44_P_2): Likewise.
 206         (PREFIX_VEX_3A48): Updated.
 207         (VEX_LEN_3A4C_P_2): Likewise.
 208         (prefix_table): Add PREFIX_VEX_3A44.
 209         (vex_table): Likewise.
 210         (vex_len_table): Add VEX_LEN_3A44_P_2.
 211
 212         * i386-opc.tbl: Add PCLMUL + AVX instructions.
 213         * i386-tbl.h: Regenerated.
 214
 215 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
 216
 217         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
 218         (mips_arch_choices): Add XLR entry.
 219         * mips-opc.c (XLR): Define.
 220         (mips_builtin_opcodes): Add XLR instructions.
 221
 222 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
 223
 224         * Makefile.am: Add install-pdf target.
 225         * po/Make-in: Add install-pdf target.
 226         * Makefile.in: Regenerate.
 227
 228 2009-02-02  DJ Delorie  <dj@redhat.com>
 229
 230         * mep-asm.c: Regenerate.
 231         * mep-desc.c: Regenerate.
 232         * mep-desc.h: Regenerate.
 233         * mep-dis.c: Regenerate.
 234         * mep-ibld.c: Regenerate.
 235         * mep-opc.c: Regenerate.
 236         * mep-opc.h: Regenerate.
 237
 238 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
 239
 240         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
 241         qsub, and qdsub.
 242
 243 2009-01-28  Chao-ying Fu  <fu@mips.com>
 244
 245         * mips-opc.c (suxc1): Add the flag of FP_D.
 246
 247 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
 248
 249         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
 250         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
 251         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
 252         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
 253         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
 254         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
 255         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
 256         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
 257
 258 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
 259
 260         * configure.in (commonbfdlib): Delete.
 261         (SHARED_LIBADD): Add pic libiberty if such is available.
 262         * configure: Regenerate.
 263         * po/POTFILES.in: Regenerate.
 264
 265 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
 266
 267         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
 268         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
 269         operand form and enable the four operand form for POWER6 and later.
 270         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
 271         three operand form for POWER6 and later.
 272
 273 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
 274
 275         * bfin-dis.c (OUTS): Use "%s" as format string.
 276
 277 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
 278
 279         * i386-gen.c (cpu_flag_init): Remove a white space.
 280         (operand_type_init): Likewise.
 281
 282 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
 283
 284         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
 285         * i386-tbl.h: Regenerated.
 286
 287 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
 288
 289         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
 290         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
 291         subS, xorS and cmpS.
 292
 293 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
 294
 295         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
 296         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
 297         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
 298         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
 299         and CpuSYSCALL.
 300         (lineno): Removed.
 301         (set_bitfield): Take an argument, lineno.  Don't report lineno
 302         on error if it is -1.
 303         (process_i386_cpu_flag): Take an argument, lineno.
 304         (process_i386_opcode_modifier): Likewise.
 305         (process_i386_operand_type): Likewise.
 306         (output_i386_opcode): Likewise.
 307         (opcode_hash_entry): Add lineno.
 308         (process_i386_opcodes): Updated.
 309         (process_i386_registers): Likewise.
 310         (process_i386_initializers): Likewise.
 311
 312         * i386-opc.h (CpuP4): Removed.
 313         (CpuK6): Likewise.
 314         (CpuK8): Likewise.
 315         (CpuClflush): New.
 316         (CpuSYSCALL): Likewise.
 317         (CpuMMX): Updated.
 318         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
 319         cpuclflush and cpusyscall.
 320
 321         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
 322         syscall and sysret.
 323         * i386-init.h: Regenerated.
 324         * i386-tbl.h: Likewise.
 325
 326 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
 327
 328         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
 329         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
 330         (cpu_flags): Add CpuRdtscp.
 331         (set_bitfield): Remove CpuSledgehammer check.
 332
 333         * i386-opc.h (CpuRdtscp): New.
 334         (CpuLM): Updated.
 335         (i386_cpu_flags): Add cpurdtscp.
 336
 337         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
 338         * i386-init.h: Regenerated.
 339         * i386-tbl.h: Likewise.
 340
 341 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
 342
 343         * ppc-opc.c (PPCNONE): Define.
 344         (NOPOWER4): Delete.
 345         (powerpc_opcodes): Initialize the new "deprecated" field.
 346
 347 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
 348
 349         AVX Programming Reference (December, 2008)
 350         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
 351         (VEX_LEN_E7_P_2_M_0): Likewise.
 352         (VEX_LEN_2C_P_1): Updated.
 353         (VEX_LEN_E8_P_2): Likewise.
 354         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
 355         (mod_table): Likewise.
 356
 357         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
 358         * i386-tbl.h: Regenerated.
 359
 360 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 361
 362         * i386-gen.c (process_copyright): Update for 2009.
 363
 364         * i386-init.h: Regenerated.
 365         * i386-tbl.h: Likewise.
 366
 367 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
 368
 369         AVX Programming Reference (December, 2008)
 370         * i386-dis.c (OP_VEX_FMA): Removed.
 371         (OP_EX_VexW): Likewise.
 372         (OP_EX_VexImmW): Likewise.
 373         (OP_XMM_VexW): Likewise.
 374         (VEXI4_Fixup): Likewise.
 375         (VPERMIL2_Fixup): Likewise.
 376         (VexI4): Likewise.
 377         (VexFMA): Likewise.
 378         (Vex128FMA): Likewise.
 379         (EXVexW): Likewise.
 380         (EXdVexW): Likewise.
 381         (EXqVexW): Likewise.
 382         (EXVexImmW): Likewise.
 383         (XMVexW): Likewise.
 384         (VPERMIL2): Likewise.
 385         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
 386         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
 387         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
 388         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
 389         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
 390         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
 391         (get_vex_imm8): Likewise.
 392         (OP_EX_VexReg): Likewise.
 393         vpermil2_op): Likewise.
 394         (EXVexWdq): New.
 395         (vex_w_dq_mode): Likewise.
 396         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
 397         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
 398         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
 399         (es_reg): Updated.
 400         (PREFIX_VEX_38DB): Likewise.
 401         (PREFIX_VEX_3A4A): Likewise.
 402         (PREFIX_VEX_3A60): Likewise.
 403         (PREFIX_VEX_3ADF): Likewise.
 404         (VEX_LEN_3ADF_P_2): Likewise.
 405         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
 406         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
 407         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
 408         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
 409         PREFIX_VEX_3896...PREFIX_VEX_389F,
 410         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
 411         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
 412         (vex_table): Likewise.
 413         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
 414         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
 415         (putop): Support "%XW".
 416         (intel_operand_size): Handle vex_w_dq_mode.
 417
 418         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
 419
 420         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
 421         instructions.  Add new FMA instructions.
 422         * i386-tbl.h: Regenerated.
 423
 424 2009-01-02  Matthias Klose  <doko@ubuntu.com>
 425
 426         * or32-opc.c (or32_print_register, or32_print_immediate,
 427         disassemble_insn): Don't rely on undefined sprintf behaviour.
 428
 429 For older changes see ChangeLog-2008
 430 \f
 431 Local Variables:
 432 mode: change-log
 433 left-margin: 8
 434 fill-column: 74
 435 version-control: never
 436 End: