4daebc53d9c4188ee8c4dbc38a0f50bcf3af8a7a
[deliverable/binutils-gdb.git] / opcodes / ChangeLog
1 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2
3 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
4 3bit immediate operands.
5
6 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
7
8 * Released binutils 2.7.
9
10 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
11 <kkaempf@progis.ac-net.de>.
12
13 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
14
15 * alpha-opc.c: Correct second case of "mov" to use OPRL.
16
17 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
18
19 * sparc-dis.c (print_insn_sparclite): New routine to print
20 sparclite instructions.
21
22 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
23
24 * m68k-opc.c (m68k_opcodes): Add coldfire support.
25
26 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
27
28 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
29 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
30 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
31
32 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
33
34 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
35 Use autoconf-set values.
36 (docdir, oldincludedir): Removed.
37 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
38
39 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
40
41 * alpha-opc.c: New file.
42 * alpha-opc.h: Remove.
43 * alpha-dis.c: Complete rewrite to use new opcode table.
44 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
45 * configure: Rebuild with autoconf 2.10.
46 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
47 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
48 alpha-opc.h.
49 (alpha-opc.o): New target.
50
51 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
52
53 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
54 Set imm_added_to_rs1 even if the source and destination register
55 are not the same.
56
57 * sparc-opc.c: Add some two operand forms of the wr instruction.
58
59 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
60
61 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
62 to just "mode".
63
64 * disassemble.c (disassembler): Handle H8/S.
65 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
66
67 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
68
69 * sparc-opc.c: Add beq/teq as aliases for be/te.
70
71 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
72 <sergei@msil.sps.mot.com>.
73
74 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
75
76 * makefile.vms: New file.
77
78 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
79
80 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
81
82 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
83 regardless of plen.
84
85 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
86
87 * i386-dis.c (OP_OFF): Call append_prefix.
88
89 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
90
91 * ppc-opc.c (instruction encoding macros): Add explicit casts to
92 unsigned long to silence a warning from the Solaris PowerPC
93 compiler.
94
95 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
96
97 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
98
99 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
100
101 * sparc-dis.c (X_IMM,X_SIMM): New macros.
102 (X_IMM13): Delete.
103 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
104 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
105 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
106 cpush, cpusha, cpull sparclet insns.
107
108 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
109
110 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
111
112 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
113
114 * sparc-opc.c: Set F_FBR on floating point branch instructions.
115 Set F_FLOAT on other floating point instructions.
116
117 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
118
119 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
120 registers.
121 (powerpc_opcodes): Add 860/821 specific SPRs.
122
123 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
124
125 * configure.in: Permit --enable-shared to specify a list of
126 directories. Set and substitute BFD_PICLIST.
127 * configure: Rebuild.
128 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
129 uses. Set to @BFD_PICLIST@.
130
131 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
132
133 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
134 not "abs", which may be needed for the absolute in something
135 like btst #0,@10:8. Print L_3 immediates separately from other
136 immediates. Change ABSMOV reference to ABS8MEM.
137
138 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
139
140 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
141 (current_arch_mask): New static global.
142 (compute_arch_mask): New static function.
143 (print_insn_sparc): Delete sparc_v9_p. New static local
144 current_mach. Resort opcode table if current_mach changes.
145 Generalize "insn not supported" test.
146 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
147 Delete test for v9/!v9.
148 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
149 (v6notlet): Define.
150 (brfc): Split into CBR and FBR for coprocessor/fp branches.
151 (brfcx): Renamed to FBRX.
152 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
153 coprocessor mnemonics are not supported on the sparclet).
154 (condf): Renamed to CONDF.
155 (SLCBCC2): Delete F_ALIAS flag.
156
157 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
158
159 * sparc-opc.c (sparc_opcodes): rd must be 0 for
160 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
161
162 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
163
164 * Makefile.in (config.status): Depend upon BFD VERSION file, so
165 that the shared library version number is set correctly.
166
167 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
168
169 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
170 Miles Bader <miles@gnu.ai.mit.edu>.
171 * configure: Rebuild.
172
173 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
174
175 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
176 malloc.
177
178 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
179
180 * configure: Rebuild with autoconf 2.8.
181
182 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
183
184 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
185 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
186
187 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
188
189 * configure.in: Don't set SHLIB or SHLINK to an empty string,
190 since they appear as targets in Makefile.in.
191 * configure: Rebuild.
192
193 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
194
195 * mpw-make.sed: Edit out shared library support bits.
196
197 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
198
199 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
200 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
201 (sparc_opcodes): Add sparclet insns.
202 (sparclet_cpreg_table): New static local.
203 (sparc_{encode,decode}_sparclet_cpreg): New functions.
204 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
205
206 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
207
208 * i386-dis.c (index16): New static variable.
209 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
210 other way around.
211 (OP_indirE): Return result of OP_E.
212 (OP_E): Check for 16 bit addressing mode, and disassemble
213 correctly. Optimised 32 bit case a little. Don't print
214 "(base,index,scale)" when sib specifies only an offset.
215
216 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
217
218 * configure.in: Set and substitute SHLIB_DEP.
219 * configure: Rebuild.
220 * Makefile.in (SHLIB_DEP): New variable.
221 (LIBIBERTY_LISTS, BFD_LIST): New variables.
222 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
223 COMMON_SHLIB, add them to piclist with appropriate modifications.
224 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
225 here: just use piclist.
226
227 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
228
229 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
230 (print_insn_sparc): Rewrite v9/not-v9 tests.
231 (compare_opcodes): Likewise.
232 * sparc-opc.c (MASK_<ARCH>): Define.
233 (v6,v7,v8,sparclite,v9,v9a): Redefine.
234 (sparclet,v6notv9): Define.
235 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
236 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
237
238 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
239
240 * configure.in: Call AC_PROG_CC before configure.host.
241 * configure: Rebuild.
242
243 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
244
245 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
246
247 * i386-dis.c (onebyte_has_modrm): New static array.
248 (twobyte_has_modrm): New static array.
249 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
250
251 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
252
253 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
254 $(SHLINK).
255
256 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
257
258 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
259 doesn't conflict.
260
261 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
262
263 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
264 m68010up, not just m68020up | cpu32.
265
266 * Makefile.in (SONAME): New variable.
267 ($(SHLINK)): Make a link to the transformed name, as well.
268 (stamp-tshlink): New target.
269 (install): Skip stamp-tshlink during install.
270
271 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
272
273 * configure.in: Call AC_ARG_PROGRAM.
274 * configure: Rebuild.
275 * Makefile.in (program_transform_name): New variable.
276 (install): Transform library name before installing it.
277
278 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
279
280 * i960-dis.c (mem): Add HX dcinva instruction.
281
282 Support for building as a shared library, based on patches from
283 Alan Modra <alan@spri.levels.unisa.edu.au>:
284 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
285 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
286 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
287 * configure: Rebuild.
288 * Makefile.in (ALLLIBS): New variable.
289 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
290 (COMMON_SHLIB, SHLINK): New variables.
291 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
292 (STAGESTUFF): Remove variable.
293 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
294 (stamp-piclist, piclist): New targets.
295 ($(SHLIB), $(SHLINK)): New targets.
296 ($(OFILES)): Depend upon stamp-picdir.
297 (disassemble.o): Build twice if PICFLAG is set.
298 (MOSTLYCLEAN): Add pic/*.o.
299 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
300 (distclean): Remove pic and stamp-picdir.
301 (install): Install shared libraries.
302 (stamp-picdir): New target.
303
304 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
305
306 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
307 Print unknown instruction as "unknown", rather than in hex.
308
309 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
310
311 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
312
313 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
314
315 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
316
317 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
318
319 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
320 when necessary. From Ulrich Drepper
321 <drepper@myware.rz.uni-karlsruhe.de>.
322
323 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
324
325 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
326 sparc_num_opcodes. Update architecture enum values.
327 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
328 (sparc_opcode_lookup_arch): New function.
329 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
330 (sparc_opcodes): Add v9a shutdown insn.
331
332 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
333
334 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
335 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
336 architecture.
337 (print_insn_sparc64): Deleted.
338 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
339 print_insn_sparc.
340
341 * sparc-opc.c (architecture_pname): Add v9a.
342
343 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
344
345 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
346 incorrectly defined as 0x16 when it should be 0x15.
347 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
348 (alpha_insn_set): added cvtst and cvttq float ops. Also added
349 excb (exception barrier) which is defined in the Alpha
350 Architecture Handbook version 2.
351 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
352 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
353 disassembled as or, for example.
354
355 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
356
357 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
358 (_print_insn_mips): Change i from int to unsigned int.
359
360 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
361
362 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
363 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
364
365 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
366
367 * i386-dis.c: Added Pentium Pro instructions.
368
369 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
370
371 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
372 being for Power2.
373
374 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
375
376 * sh-opc.h (sh_nibble_type): Added REG_B.
377 (sh_arg_type): Added A_REG_B.
378 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
379 and stc.l opcodes.
380 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
381
382 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
383
384 * disassemble.c (disassembler): Use new bfd_big_endian macro.
385
386 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
387
388 * Makefile.in (distclean): Remove stamp-h. From Ronald
389 F. Guilmette <rfg@monkeys.com>.
390
391 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
392
393 From David Mosberger-Tang <davidm@azstarnet.com>:
394 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
395 instruction.
396
397 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
398
399 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
400 (sh_table): Added many SH3 opcodes.
401 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
402
403 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
404
405 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
406 (subco,subco.): Mark this PPC, not PPCCOM.
407
408 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
409
410 * configure: Rebuild with autoconf 2.7.
411
412 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
413
414 * configure: Rebuild with autoconf 2.6.
415
416 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
417
418 * configure.in: Sort list of architectures. Accept but do nothing
419 for alliant, convex, pyramid, romp, and tahoe.
420
421 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
422
423 * a29k-dis.c (print_special): Change num to unsigned int.
424
425 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
426
427 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
428 shifting it.
429
430 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
431
432 * configure.in: Call AC_CHECK_PROG to find and cache AR.
433 * configure: Rebuilt.
434
435 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
436
437 * configure.in: Add case for bfd_i860_arch.
438 * configure: Rebuild.
439
440 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
441
442 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
443 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
444 (NEXTDOUBLE): Likewise.
445 (print_insn_m68k): Don't match fmoveml if there is more than one
446 register in the list.
447 (print_insn_arg): Handle a place of '8' for a type of 'L'.
448
449 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
450
451 * m68k-opc.c: Use #W rather than #w.
452 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
453
454 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
455
456 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
457 and likewise for all the dbxx opcodes.
458
459 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
460
461 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
462
463 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
464
465 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
466 the VR4100 specific instructions to the mips_opcodes structure.
467
468 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
469
470 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
471 ugly Metrowerks bug in CW6, is fixed in CW7.
472
473 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
474
475 * ppc-opc.c (whole file): Add flags for common/any support.
476
477 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
478
479 * Makefile.in (BISON): Remove macro.
480 (FLAGS_TO_PASS): Remove BISON.
481
482 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
483
484 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
485
486 * m68k-dis.c (print_insn_m68k): Recognize all two-word
487 instructions that take no args by looking at the match mask.
488 (print_insn_arg): Always print "%" before register names.
489 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
490 [case '_']: Don't print "@#" before address.
491 [case 'J']: Use "%s" as format string, not register name.
492 [case 'B']: Treat place == 'C' like 'l' and 'L'.
493
494 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
495
496 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
497 name correctly.
498
499 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
500
501 From David Mosberger-Tang <davidm@azstarnet.com>
502
503 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
504 (alpha_insn_set): added definitions for VAX floating point
505 instructions (Unix compilers don't generate these, but handcoded
506 assembly might still use them).
507
508 * alpha-dis.c (print_insn_alpha): added support for disassembling
509 the miscellaneous instructions in the Alpha instruction set.
510
511 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
512
513 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
514 no longer create sysdep.h, sed ppc-opc.c to work around a
515 serious Metrowerks C bug.
516 * mpw-make.in: Remove.
517 * mpw-make.sed: New file, used by mpw-configure to edit
518 Makefile.in into an MPW makefile.
519
520 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
521
522 * Makefile.in (maintainer-clean): New synonym for realclean.
523
524 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
525
526 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
527 which use '0', '1', and '2' instead. Specify the proper size for
528 a pmove immediate operand. Correct the pmovefd patterns to be
529 moves to a register, not from a register.
530 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
531
532 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
533
534 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
535 %psr, %wim, %tbr as F_NOTV9.
536
537 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
538
539 * Makefile.in (Makefile): Just rebuild Makefile when running
540 config.status.
541 (config.h, stamp-h): New targets.
542 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
543 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
544 rebuilding config.h.
545 * configure: Rebuild.
546
547 * mips-opc.c: Change unaligned loads and stores with "t,A"
548 operands to use "t,A(b)".
549
550 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
551
552 * sh-dis.c (print_insn_shx): Add F_FR0 support.
553
554 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
555
556 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
557 until 3 instead of until 2.
558
559 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
560
561 * Makefile.in (ALL_CFLAGS): Define.
562 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
563 (MOSTLYCLEAN): Add config.log.
564 (distclean): Don't remove config.log.
565 * configure.in: Substitute HDEFINES.
566 * configure: Rebuild.
567
568 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
569
570 * sh-opc.h (sh_arg_type): Add F_FR0.
571 (sh_table, case fmac): Add F_FR0 as first argument.
572
573 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
574
575 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
576
577 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
578
579 * sparc-dis.c: Remove all references to NO_V9.
580
581 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
582
583 * aclocal.m4: Just include ../bfd/aclocal.m4.
584 * configure: Rebuild.
585
586 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
587
588 * sparc-dis.c (X_DISP19): Define.
589 (print_insn, case 'G'): Use it.
590 (print_insn, case 'L'): Sign extend displacement.
591
592 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
593
594 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
595 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
596 host_makefile_frag or frags.
597 * aclocal.m4: New file.
598 * configure: Rebuild.
599 * Makefile.in (INSTALL): Set to @INSTALL@.
600 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
601 (INSTALL_DATA): Set to @INSTALL_DATA@.
602 (AR): Set to @AR@.
603 (AR_FLAGS): Set to rc rather than qc.
604 (CC): Define as @CC@.
605 (CFLAGS): Set to @CFLAGS@.
606 (@host_makefile_frag@): Remove.
607 (config.status): Remove dependency upon @frags@.
608
609 * configure.in: ../bfd/config.bfd now just sets shell variables.
610 Use them rather than looking through target Makefile fragments.
611 * configure: Rebuild.
612
613 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
614
615 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
616
617 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
618
619 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
620 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
621 sparc64 insns.
622
623 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
624 (lookup_{name,value}): New functions.
625 (prefetch_table): New static local.
626 (sparc_{encode,decode}_prefetch): New functions.
627 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
628
629 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
630
631 * sh-opc.h: Add blank lines to improve readabililty of sh3e
632 instructions.
633
634 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
635
636 * sh-dis.c: Correct comment on first line of file.
637
638 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
639
640 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
641
642 * sparc-opc.c (asi, membar): New static locals.
643 (sparc_{encode,decode}_{asi,membar}): New functions.
644 (sparc_opcodes, membar insn): Fix.
645 * sparc-dis.c (print_insn): Call sparc_decode_asi.
646 Support decoding of membar masks.
647 (X_MEMBAR): Define.
648
649 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
650
651 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
652
653 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
654
655 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
656 and likewise for the other branches. Add bhs as an alias for bcc,
657 and likewise for the size variants. Add dbhs as an alias for
658 dbcc.
659
660 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
661
662 * sh-opc.h (FP sts instructions): Update to match reality.
663
664 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
665
666 * m68k-dis.c: (fpcr_names): Add % before all register names.
667 (reg_names): Likewise.
668 (print_insn_arg): Don't explicitly print % before register names.
669 Add % before register names in static array names. In case 'r',
670 print data registers as `@(Dn)', not `Dn@'. When printing a
671 memory address, don't print @# before it.
672 (print_indexed): Change base_disp and outer_disp from int to
673 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
674 syntax. Sign extend 8 byte displacement correctly.
675 (print_base): Print using MIT syntax. Print zpc when appropriate.
676 Change parameter disp from int to bfd_vma.
677
678 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
679 for jsr.
680
681 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
682
683 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
684 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
685 * sh-opc.h (sh_arg_type): Add new operand types.
686 (sh_table): Add new opcodes from SH3E Floating Point ISA.
687
688 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
689
690 * Makefile.in (distclean): Remove generated file config.h.
691
692 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
693
694 * Makefile.in (distclean): Remove generated file config.h.
695
696 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
697
698 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
699 Clean up tables.
700 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
701 (opcode): Remove.
702 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
703 rather than numopcodes. Use m68k_opcodes rather than removed
704 opcode function. Don't check F_ALIAS.
705 (print_insn_arg): Change first parameter to be const char *.
706 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
707 (m68k-opc.o): New target.
708 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
709 * configure: Rebuild.
710
711 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
712
713 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
714 (opcode_bits, opcode_hash_table): New variables.
715 (opcodes_initialized): Renamed from opcodes_sorted.
716 (build_hash_table): New function.
717 (is_delayed_branch): Use hash table.
718 (print_insn): Renamed from print_insn_sparc, made static.
719 Build and use hash table. If !sparc64, ignore sparc64 insns,
720 and vice-versa if sparc64.
721 (print_insn_sparc, print_insn_sparc64): New functions.
722 (compare_opcodes): Move sparc64 opcodes to end.
723 Print commutative insns with constant second.
724 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
725
726 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
727
728 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
729 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
730 avoids printing a delay slot in a delay slot.
731 * sh-opc.h (sh_table): Fully bracket last entry.
732
733 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
734
735 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
736
737 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
738
739 * configure.in: Get host_makefile_frag from ${srcdir}.
740
741 * configure.in: Autoconfiscated. Check for string[s].h. Create
742 config.h from config.in. Don't set up sysdep.h link.
743 * sysdep.h: New file.
744 * configure, config.in: New files, generated from configure.in.
745 * Makefile.in: Updated to be processed autoconf-style.
746 (distclean): Keep sysdep.h. Remove config.log and config.cache.
747 (Makefile): Depend on config.status.
748 (config.status): New rule.
749 * configure.bat: Update Makefile substitutions.
750
751 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
752
753 * mips-opc.c (L1): Define.
754 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
755 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
756 and wb.
757
758 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
759
760 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
761 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
762 have multiple add units but only a single logical unit.
763
764 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
765 shifted by 18, without any insertion or extraction function.
766 (insert_cr, extract_cr): Remove.
767
768 start-sanitize-arc
769 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
770
771 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
772
773 end-sanitize-arc
774 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
775
776 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
777 register names.
778
779 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
780
781 * mpw-config.in: Add sh and i386 configs, remove sparc config.
782 * sh-opc.h: Add copyright.
783
784 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
785
786 * Makefile.in (crunch-m68k): Delete extra target accidentally
787 checked in a while ago.
788
789 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
790
791 * sh-opc.h (sh_table): Add SH3 support.
792
793 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
794
795 * sh-opc.h: Added bsrf and braf.
796
797 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
798
799 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
800 bogus [ls]fm{ea,fd} patterns.
801
802 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
803 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
804 initialize it from memory. Make function static.
805 (print_insn_{big,little}_arm): New functions.
806 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
807 the correct endianness.
808
809 start-sanitize-arc
810 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
811
812 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
813 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
814 end-sanitize-arc
815
816 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
817
818 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
819 enum list.
820
821 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
822
823 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
824 17th, so that it builds again using GCC as the compiler.
825
826 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
827
828 * mips-dis.c (print_insn_little_mips): Cast return value from
829 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
830 expects an unsigned long, and that might be fewer words of
831 argument storage (e.g., if bfd_vma is long long on a 32-bit
832 machine).
833 (print_insn_big_mips): Likewise with bfd_getb32 value.
834 (_print_insn_mips): Now static.
835
836 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
837
838 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
839 gcc memory hog problem with initializer is fixed.
840
841 start-sanitize-arc
842 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
843
844 * arc-opc.c (NULL): Define.
845 (arc_operands, insn fields u,s): Delete.
846 (arc_operands, insn fields a,b,c): Mark as signed.
847 (arc_opcodes): No longer const, links computed at run-time.
848 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
849 suffixes that affect the insn code.
850 (arc_opcodes): Resort table to macros are first.
851 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
852 (arc_opcodes, st [b] entry): Likewise.
853 (arc_opcodes, st [b,d] entry): Fix mask, value.
854 (arc_reg_names): Add entries for r29, r30, r31, r60.
855 (opcode_map, icode_map): New static globals.
856 (arc_opcode_init_tables): Initialize them.
857 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
858 (insert_shimmoffset): Signal error if register present.
859 Validate constant.
860 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
861 end-sanitize-arc
862
863 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
864
865 Merge in support for Mac MPW as a host.
866 (Old change descriptions retained for informational value.)
867
868 * mpw-config.in (archname): Compute from the config.
869 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
870
871 * mpw-config.in (target_arch): Compute from canonical target.
872 (m68k, mips, powerpc, sparc): Add architectures.
873 * mpw-make.in (disassemble.c.o): Add.
874 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
875
876 * mpw-config.in (BFD_MACHINES): Set to a default value.
877 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
878
879 * mpw-make.in (CSEARCH): Add extra-include to search path.
880
881 * mpw-config.in (varargs.h): Don't create.
882 (sysdep.h): Create using forward-include.
883 * mpw-make.in (CSEARCH): Add include/mpw to search path.
884
885 * mpw-config.in: New file, MPW version of configure.in.
886 * mpw-make.in: New file, MPW version of Makefile.in.
887
888 start-sanitize-arc
889 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
890
891 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
892 Call arc_get_opcode_mach to map bfd mach number to opcode value.
893 (print_insn_*): Pass bfd mach number, not opcode version.
894 * arc-opc.c (arc_get_opcode_mach): New function.
895 end-sanitize-arc
896
897 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
898
899 * alpha-dis.c (print_insn_alpha): Put empty statement after
900 default label.
901
902 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
903
904 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
905 (low_sign_extend): Likewise.
906 (get_field): Delete unused function.
907 (set_field, deposit_14, deposit_21): Likewise.
908
909 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
910
911 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
912 (guy@netapp.com).
913
914 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
915
916 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
917
918 * alpha-opc.h (OSF_ASMCODE): define
919 print pal-code names as defined in App C of the
920 Alpha Architecture Reference Manual
921
922 * alpha-dis.c: cleaned up output
923 print stylized code forms as defined in App A.4.3 of the
924 Alpha Architecture Reference Manual
925
926 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
927
928 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
929 `rfe'.
930 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
931 'N', and 'M'.
932
933 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
934
935 * m68k-dis.c (opcode): New function. Returns address of opcode
936 table entry given index, even if the opcode table was split to
937 work around gcc bugs.
938 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
939 directly.
940 (BREAK_UP_BIG_DECL): Make secondary array static and const.
941 (reg_names): Now const.
942 (print_insn_arg): Arrays cacheFieldName and names now const.
943 (print_indexed): Array scales now const.
944
945 start-sanitize-arc
946 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
947
948 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
949 (print_insn_arc_{host,graphics,audio}): Likewise.
950 (print_insn): Add prototype.
951 (arc_get_disassembler): New arg `big_p'. Return little or big
952 print fn accordingly.
953 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
954 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
955 (arc_opval_supported): Likewise.
956 * disassemble.c (disassembler): Pass big endian flag to
957 arc_get_disassembler.
958 end-sanitize-arc
959
960 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
961
962 * ppc-opc.c: Sort recently added instructions by minor opcode
963 number within major opcode number.
964
965 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
966
967 * hppa-dis.c: Include libhppa.h.
968
969 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
970
971 * mips-opc.c: Change dli to use M_DLI, and add dla.
972
973 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
974
975 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
976
977 start-sanitize-arc
978 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
979
980 * arc-dis.c (arc_get_disassembler): Change argument to int,
981 one of bfd_mach_arc_xxx. All callers updated.
982 end-sanitize-arc
983
984 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
985
986 * mips-opc.c: Add r4650 mul instruction.
987
988 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
989
990 * mips-opc.c: Add uld and usd macros for unaligned double load and
991 store.
992
993 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
994
995 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
996 mfdcr, mtdcr, icbt, iccci.
997
998 start-sanitize-arc
999 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1000
1001 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1002 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1003 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1004 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1005 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1006 (insert_absaddr): New function.
1007
1008 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1009
1010 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1011 New argument `cpu', pass it to arc_opcode_init_tables.
1012 Document byte order dependencies. Ignore unsupported insns.
1013 (arc_get_disassembler): New function.
1014 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1015 print_insn_arc_audio): New functions.
1016 * arc-opc.c (MULTSHIFT operand): Delete.
1017 (UNSIGNED, SATURATION): New operands.
1018 (mac, mul, mul64, mulu64): New insns.
1019 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1020 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1021 (host,graphics,audio extended and auxiliary regs): Define.
1022 (ss, sc, mh, ml): New suffixes.
1023 (arc_opcode_supported, arc_opval_supported): New functions.
1024 (insert_multshift, extract_multshift): Deleted.
1025 * disassemble.c (disassembler, case bfd_arch_arc): Call
1026 arc_get_disassembler to get disassembler routine.
1027 end-sanitize-arc
1028
1029 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1030
1031 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1032 signed char fields to shorts, more portable.
1033
1034 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1035
1036 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1037 char fields as signed chars, since they may have negative values.
1038
1039 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1040
1041 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1042 (mycroft@netbsd.org).
1043
1044 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1045
1046 From "Logg, Ed" <elogg@ea.com>:
1047 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1048 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1049 value.
1050
1051 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1052
1053 * ppc-opc.c: Changes based on patch from David Edelsohn
1054 <edelsohn@mhpcc.edu>.
1055 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1056 SPR.
1057 (FXM_MASK): Define.
1058 (insert_tbr): New static function.
1059 (extract_tbr): New static function.
1060 (XFXFXM_MASK, XFXM): Define.
1061 (XSPRBAT_MASK, XSPRG_MASK): Define.
1062 (powerpc_opcodes): Add instructions to access special registers by
1063 name. Add mtcr and mftbu.
1064
1065 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1066
1067 * mips-opc.c (P3): Define.
1068 (mips_opcodes): Add mad and madu.
1069
1070 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1071
1072 * configure.in: Add W65 support.
1073 * disassemble.c: Likewise.
1074 * w65-opc.h, w65-dis.c: New files.
1075
1076 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1077
1078 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1079 immediates.
1080
1081 start-sanitize-arc
1082 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1083
1084 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1085 slot.
1086 * arc-opc.c (extract_reladdr): New function.
1087 (insert_reladdr): Store address right-shifted by 2.
1088 end-sanitize-arc
1089
1090 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1091
1092 * mips-opc.c: Add dli as a synonym for li.
1093
1094 start-sanitize-arc
1095 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1096
1097 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1098 All uses changed.
1099 (extraction fns): Insn argument now array of two words. Return pointer
1100 to value's table entry. All uses changed.
1101 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1102 (insert_multshift, extract_multshift): New fns.
1103 (arc_operands): Add support for cache bypass suffix. Add support for
1104 predefined aux regs. Modifier bits moved to flags field.
1105 (arc_opcodes): Likewise.
1106 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1107 New insn rlc. Update to syntax in programmer's manual.
1108 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1109 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1110 bypass.
1111 (arc_opcode_init_tables): New argument to indicate cpu type.
1112 (insert_reg): Handle predefined aux regs.
1113 (extract_reg): Likewise.
1114 (lookup_register): New fn.
1115 * arc-dis.c (arc_condition_codes): Deleted.
1116 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1117 Clean up modifier handling. Handle predefined aux regs.
1118 end-sanitize-arc
1119
1120 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1121
1122 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1123 print something for reserved opcode values, even if it won't
1124 assemble again.
1125
1126 * mips-dis.c (_print_insn_mips): When initializing, shift right
1127 and mask, to avoid sign extension problems on the Alpha.
1128
1129 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1130 control registers.
1131
1132 start-sanitize-arc
1133 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1134
1135 * configure.in: Add ARC support.
1136 * disassemble.c: Likewise.
1137 * arc-dis.c, arc-opc.c: New files.
1138 end-sanitize-arc
1139
1140 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1141
1142 * sh-opc.h (mov.l gbr): Get direction right.
1143 * sh-dis.c (print_insn_shx): New function.
1144 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1145 print opcodes with right byte order.
1146
1147 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1148
1149 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1150 to avoid conflicts with getopt.
1151
1152 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1153
1154 * hppa-dis.c (print_insn_hppa): Read the instruction using
1155 bfd_getb32, so that it works on a little endian or 64 bit host.
1156 Remove unused local variable op.
1157
1158 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1159
1160 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1161 addu does not work correctly if -mips3.
1162
1163 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1164
1165 * a29k-dis.c (print_special): Add special register names defined
1166 on 29030, 29040 and 29050.
1167 (print_insn): Handle new operand type 'I'.
1168
1169 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1170
1171 * Makefile.in (INSTALL): Use top level install.sh script.
1172
1173 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1174
1175 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1176 that it works on a little endian host.
1177
1178 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1179
1180 * configure.in: Use ${config_shell} when running config.bfd.
1181
1182 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1183
1184 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1185
1186 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1187
1188 * a29k-dis.c (print_insn): Print the opcode.
1189
1190 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1191
1192 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1193
1194 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1195
1196 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1197
1198 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1199
1200 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1201 which store a value into memory.
1202
1203 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1204
1205 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1206 * arm-dis.c, arm-opc.h: New files.
1207
1208 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1209
1210 * Makefile.in (ns32k-dis.o): Add dependency.
1211 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1212 string, not as array of chars.
1213
1214 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1215
1216 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1217
1218 * sparc-opc.c: Added sparclite extended FP operations, and
1219 versions of v9 impdep* instructions permitting specification of
1220 the OPF field.
1221
1222 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1223
1224 * i960-dis.c (reg_names): Now const.
1225 (struct sparse_tabent): New type, copied from array type in mem
1226 function.
1227 (ctrl): Local static array ctrl_tab now const.
1228 (cobr): Local static array cobr_tab now const.
1229 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1230 static variable mem_tab no longer explicitly initialized. Changed
1231 mem_init to const array of struct sparse_tabent.
1232 (reg): Local static variable reg_tab no longer explicitly
1233 initialized. Changed reg_init to const array of struct
1234 sparse_tabent.
1235 (ea): Local static array scale_tab now const.
1236
1237 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1238 (REG_MAX): Updated.
1239
1240 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1241
1242 * configure.bat: the disassember needs to be enabled for
1243 "objdump -d" to work in djgpp.
1244
1245 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1246
1247 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1248 (invalid_float): Enabled general version, doesn't require running
1249 on ns32k host. Changed to take char* argument, and test for
1250 explicitly specified sizes, instead of using sizeof() on host CPU
1251 types.
1252 (INVALID_FLOAT): Cast first argument.
1253 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1254 list_P032, list_M032): Now const.
1255 (optlist, list_search): Made appropriate arguments now point to
1256 const.
1257 (print_insn_arg): Changed static array of one-character-string
1258 pointers into a static const array of characters; fixed sprintf
1259 statement accordingly.
1260
1261 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1262
1263 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1264 from distribution. A ns32k-dis.c from a previous distribution has
1265 been brought up to date and supports the new interface.
1266
1267 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1268
1269 * configure.in: add bfd_ns32k_arch target support.
1270
1271 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1272 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1273
1274 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1275
1276 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1277 disassembly right.
1278
1279 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1280
1281 * h8300-dis.c, mips-dis.c: Don't use true and false.
1282
1283 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1284
1285 * configure.in: Change --with-targets to --enable-targets.
1286
1287 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1288
1289 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1290 opcodes to the first instruction with that opcode, to speed
1291 disassembly of large files. From ralphc@pyramid.com (Ralph
1292 Campbell).
1293
1294 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1295
1296 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1297
1298 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1299
1300 * configure.bat: update to latest makefile.in
1301
1302 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1303
1304 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1305 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1306 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1307 slot insn is in a delay slot.
1308 * z8k-opc.h: (resflg): Fix patterns.
1309 * h8500-opc.h Fix CR insn patterns.
1310
1311 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1312
1313 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1314 "cmpl" before POWER versions, so that gas -many uses them.
1315
1316 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1317
1318 * disassemble.c: New file.
1319 * Makefile.in (OFILES): Add disassemble.o.
1320 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1321 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1322 binutils/configure.in.
1323
1324 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1325 opcode being examined.
1326
1327 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1328
1329 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1330 (insert_ral, insert_ram, insert_ras): New functions.
1331 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1332 RAS for store with update.
1333
1334 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1335
1336 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1337 (edelsohn@npac.syr.edu).
1338
1339 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1340
1341 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1342 immediate argument.
1343
1344 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1345
1346 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1347
1348 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1349
1350 * ppc-opc.c (powerpc_operands): The signedp field has been
1351 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1352 instead. Add new operand SISIGNOPT.
1353 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1354 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1355 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1356 than signedp field.
1357
1358 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1359
1360 * i386-dis.c (struct private): Renamed to dis_private. `private'
1361 is a reserved word for dynix cc.
1362
1363 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1364
1365 * configure.in: Change error message to refer to bfd/config.bfd
1366 rather than bfd/configure.in.
1367
1368 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1369
1370 * ppc-opc.c: Define POWER2 as short alias flag.
1371 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1372 fsqrt.
1373
1374 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1375
1376 * i960-dis.c (print_insn_i960): Don't read a second word for
1377 opcodes 0, 1, 2 and 3.
1378
1379 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1380
1381 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1382
1383 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1384
1385 * m68881-ext.c: Removed; no longer used.
1386 * Makefile.in: Changed accordingly.
1387
1388 * m68k-dis.c (ext_format_68881): Don't declare.
1389 (print_insn_m68k): If an instruction uses place 'i', it uses at
1390 least four fixed bytes.
1391 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1392 extended float, convert to double using floatformat_to_double, not
1393 ieee_extended_to_double, and fetch the data before converting it.
1394
1395 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1396
1397 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1398 davidj@ICSI.Berkeley.EDU (David Johnson).
1399
1400 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1401
1402 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1403 PowerPC uses bdnz[l][a].
1404
1405 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1406
1407 * dis-buf.c, i386-dis.c: Include sysdep.h.
1408
1409 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1410
1411 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1412
1413 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1414 by Motorola PowerPC 601 with PPC_OPCODE_601.
1415 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1416 Disassemble Motorola PowerPC 601 instructions as well as normal
1417 PowerPC instructions.
1418
1419 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1420
1421 * i960-dis.c (reg, mem): Just use a static array instead of
1422 calling xmalloc.
1423
1424 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1425
1426 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1427 condition name index if this is for a negated condition.
1428
1429 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1430 Floating point format for 'H' operand is backwards from normal
1431 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1432 operands (fmpyadd and fmpysub), handle bizarre register
1433 translation correctly for single precision format.
1434
1435 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1436 or 'I' operands if the next format specifier is 'M' (fcmp
1437 condition completer).
1438
1439 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1440
1441 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1442 single number giving a bitmask for the MB and ME fields of an M
1443 form instruction. Change NB to accept 32, and turn it into 0;
1444 also turn 0 into 32 when disassembling. Seperated SH from NB.
1445 (insert_mbe, extract_mbe): New functions.
1446 (insert_nb, extract_nb): New functions.
1447 (SC_MASK): Mask out SA and LK bits.
1448 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1449 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1450 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1451 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1452 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1453 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1454 (powerpc_macros): Define table of macro definitions.
1455 (powerpc_num_macros): Define.
1456
1457 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1458 if PPC_OPERAND_NEXT is set.
1459
1460 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1461
1462 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1463 char. Retrieve contents using bfd_getl32 instead of shifting.
1464
1465 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1466
1467 * ppc-opc.c: New file. Opcode table for PowerPC, including
1468 opcodes for POWER (RS/6000).
1469 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1470 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1471 (CFILES): Add ppc-dis.c.
1472 (ppc-dis.o, ppc-opc.o): New targets.
1473 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1474
1475 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1476
1477 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1478 No space before 'u', 'f', or 'N'.
1479
1480 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1481
1482 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1483 farther than we should.
1484
1485 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1486
1487 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1488
1489 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1490
1491 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1492
1493 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1494 needs it, to prevent reading past the end of a section.
1495
1496 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1497
1498 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1499 Removed t,A case for la; always use t,A(b) case.
1500
1501 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1502
1503 From Ted Lemen <mellon@pepper.ncd.com>
1504 * mips-dis.c (print_insn_arg): Handle 'k'.
1505 * mips-opc.c: Make cache use k, not t.
1506
1507 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1508
1509 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1510 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1511 FLOAT_FORMAT_CODE to put out floating point register names.
1512
1513 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1514
1515 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1516
1517 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1518
1519 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1520
1521 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1522
1523 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1524 larger than 32. Moved dsxx32 variants first for disassembler.
1525
1526 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1527
1528 * z8kgen.c, z8k-opc.h: Add full lda information.
1529
1530 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1531
1532 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1533 movb instructions. Any necessary space will be emitted by
1534 the code to handle nullification completers.
1535
1536 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1537
1538 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1539
1540 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1541
1542 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1543 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1544
1545 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1546
1547 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1548
1549 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1550
1551 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1552 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1553
1554 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1555
1556 * m88k-dis.c (m88kdis): comment change. Remove space after
1557 printing mnemonic.
1558 (printop): handle new arg types DEC and XREG for m88110.
1559
1560 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1561
1562 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1563 type for absolute branch addresses. Delete special
1564 "ble" and "be" code in 'W' operand code.
1565
1566 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1567
1568 * mips-opc.c: Set hazard information correctly for branch
1569 likely instructions.
1570
1571 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1572
1573 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1574 info->fprintf_func for printing and info->print_address_func for
1575 address output.
1576
1577 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1578
1579 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1580
1581 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1582
1583 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1584 Corrected second case of "b" for disassembler.
1585
1586 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1587
1588 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1589 to BFD swapping routines to correspond to BFD name changes.
1590
1591 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1592
1593 * mips-opc.c: Change div machine instruction to be z,s,t rather
1594 than s,t. Change div macro to be d,v,t rather than d,s,t.
1595 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1596 rem and remu which generates only the corresponding div
1597 instruction. This is for compatibility with the MIPS assembler,
1598 which only generates the simple machine instruction when an
1599 explicit destination of $0 is used.
1600 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1601
1602 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1603
1604 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1605 WR_31 hazard for bal, bgezal, bltzal.
1606
1607 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1608
1609 * hppa-dis.c (print_insn_hppa): Use print function
1610 from within the disassemble_info, not fprintf_filtered.
1611
1612 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1613
1614 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1615 Law, law@cs.utah.edu.)
1616
1617 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1618
1619 * mips-opc.c ("absu"): Removed.
1620 ("dabs"): Added.
1621
1622 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1623
1624 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1625 Changed hazard information to distinguish between memory load
1626 delays and coprocessor load delays.
1627
1628 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1629
1630 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1631
1632 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1633
1634 * configure.in: Don't pass cpu to config.bfd.
1635
1636 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1637
1638 * m88k-dis.c (m88kdis): Make class unsigned.
1639
1640 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1641
1642 * alpha-dis.c (print_insn_alpha): One branch format case was
1643 missing the instruction name.
1644
1645 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1646
1647 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1648 Add the arch-specific auxiliary files.
1649 (OFILES): Remove the arch-specific auxiliary files
1650 and use BFD_MACHINES instead of DIS_LIBS.
1651 * configure.in: Set BFD_MACHINES based on --with-targets option.
1652
1653 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1654
1655 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1656 for swc1.
1657
1658 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1659
1660 * sparc-opc.c: Change CONST to const to deal with gcc
1661 -Dconst=__const -traditional.
1662
1663 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1664
1665 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1666 coprocessor instructions out of #if 0, and made them use new
1667 argument type "C".
1668
1669 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1670
1671 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1672
1673 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1674
1675 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1676 instruction, for use by the disassembler.
1677
1678 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1679 hand-coded sign extensions that depended on 32-bit host ints.
1680 FIXME, we still depend on big-endian host bitfield ordering.
1681 (sparc_print_insn): Set the insn_info_valid field, and the
1682 other fields that describe the instruction being printed.
1683
1684 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1685
1686 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1687 `jmp' instead of just one of them.
1688
1689 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1690
1691 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1692 (fput_fp_reg_r): Renamed from fput_reg_r.
1693 (fput_fp_reg): New function.
1694 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1695
1696 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1697
1698 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1699
1700 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1701
1702 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1703
1704 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1705 don't output a space.
1706
1707 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1708
1709 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1710
1711 * mips-opc.c: New file, containing opcode table from
1712 ../include/opcode/mips.h.
1713 * Makefile.in: Add it.
1714
1715 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1716
1717 * m88k-dis.c: New file, moved in from gdb and changed to use the
1718 new dis-asm.h disassembler interface.
1719 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1720 (m88k-dis.o): New target.
1721
1722 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1723
1724 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1725 argument string const char * to correspond to opcode/mips.h.
1726
1727 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1728
1729 * mips-dis.c: Updated to account for name changes in new version
1730 of opcode/mips.h.
1731 * Makefile.in: Added header file dependencies.
1732
1733 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1734
1735 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1736
1737 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1738
1739 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1740 extend, rather than shifts.
1741
1742 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1743
1744 * Makefile.in: Undo 15 June change.
1745
1746 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1747
1748 * m68k-dis.c (print_insn_arg): Change return value to byte count
1749 or error code.
1750 * m68k-dis.c: Re-write to detect invalid operands before
1751 printing anything, so we can handle this the same way we
1752 handle invalid opcodes.
1753
1754 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1755
1756 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1757
1758 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1759
1760 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1761 header files.
1762
1763 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1764
1765 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1766
1767 * configure.in: Do make sysdep.h link.
1768 * Makefile.in: Search ../include. Don't search ../bfd.
1769
1770 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1771
1772 Changes from Jeff Law, law@cs.utah.edu:
1773 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1774 Do not print a space before the completers specified by
1775 'a' and 'd'.
1776
1777 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1778
1779 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1780 defined, since gdb has been fixed.
1781
1782 Changes from Jeff Law, law@cs.utah.edu:
1783 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1784 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1785 be a *disassemble_info, not a *FILE.
1786 * hppa-dis.c: Support 'd', '!', and 'a'.
1787 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1788 * hppa-dis.c: Delete cases which are no longer needed.
1789
1790 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1791
1792 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1793
1794 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1795
1796 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1797 H8/300-H opcodes.
1798
1799 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1800
1801 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1802 * configure.in: No longer need to configure to get sysdep.h.
1803
1804 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1805
1806 * Patches from Jeffrey Law <law@cs.utah.edu>.
1807 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1808 templates for 1.1 FP computational instructions.
1809
1810 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1811
1812 * h8500-dis.c (print_insn_h8500): Address argument is type
1813 bfd_vma.
1814 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1815 Ditto.
1816
1817 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1818 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1819
1820 * sparc-dis.c (compare_opcodes): Move static declaration to
1821 top-level.
1822
1823 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1824
1825 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1826 instruction, remove unimp hack from 'l' argument.
1827
1828 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1829
1830 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1831 happy.
1832
1833 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1834
1835 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1836 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1837 instructions.
1838
1839 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1840
1841 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1842 arrays of string pointers to 2-d arrays of chars, to save
1843 space.
1844
1845 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1846
1847 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1848 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1849
1850 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1851
1852 * hppa-dis.c: New file from Utah, adapted to new disassembler
1853 calling interface.
1854 * Makefile.in: Include it.
1855
1856 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1857
1858 * sh-dis.c, sh-opc.h: New files.
1859
1860 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1861
1862 * alpha-dis.c, alpha-opc.h: New files.
1863
1864 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1865
1866 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1867 value.
1868
1869 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1870
1871 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1872
1873 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1874
1875 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1876 const.
1877
1878 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1879
1880 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1881 and double percent signs a few places.
1882
1883 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1884
1885 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1886 Use info->print_address_func not print_address.
1887
1888 * dis-buf.c (generic_print_address): New function.
1889
1890 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1891
1892 * Makefile.in: Add sparc-dis.c.
1893 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1894 From GDB:
1895 Add `add' instruction to the set that get checked
1896 for a preceding `sethi' in order to print an absolute address.
1897 * (print_insn): Disassembly prefers real instructions.
1898 (is_delayed_branch): Speed up.
1899 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1900 Still missing some float ops, and needs testing.
1901 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1902 F_ALIAS. Use printf, not fprintf, when not passing a file
1903 pointer...
1904 (compare_opcodes): Check that identical instructions have
1905 identical opcodes, complain otherwise.
1906 From binutils:
1907 * New 'm' arg.
1908 * Include reg_names.
1909 From neither:
1910 Use dis-asm.h/read_memory_func interface.
1911
1912 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1913
1914 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1915 deliberately return non-zero to setjmp from longjmp. Otherwise
1916 this code fails to compile.
1917
1918 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1919
1920 * m68k-dis.c: Fix prototype for fetch_arg().
1921
1922 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1923
1924 * dis-buf.c: New file, for new read_memory_func interface.
1925 Makefile.in (OFILES): Include it.
1926 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1927 Use new read_memory_func interface.
1928
1929 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1930
1931 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1932 * h8500-opc.h: Fix couple of opcodes.
1933
1934 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1935
1936 * Makefile.in: add dvi & installcheck targets
1937
1938 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1939
1940 * Makefile.in: Update for h8500-dis.c.
1941
1942 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1943
1944 * h8500-dis.c, h8500-opc.h: New files
1945
1946 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1947
1948 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1949 ../include/dis-asm.h.
1950 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1951 and ../gdb/m68k-pinsn.c).
1952 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1953 and ../gdb/i386-pinsn.c).
1954 * m68881-ext.c: New file. Moved definition of
1955 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1956 * Makefile.in: Adjust for new files.
1957 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1958 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1959 can be dis-assembled.
1960
1961 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1962
1963 * mips-dis.c (print_insn_arg): Now returns void.
1964
1965 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1966
1967 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1968 files that use the macros.
1969
1970 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1971
1972 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1973 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1974 (CFILES): Added mips-dis.c.
1975
1976 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1977
1978 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1979 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1980
1981 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1982
1983 * Makefile.in: Improve *clean rules.
1984 * configure.in: Allow a default host.
1985
1986 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1987
1988 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1989 files include other sysdep files
1990
1991 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1992
1993 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1994
1995 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1996
1997 * configure.in: For host support, use ../bfd/configure.host
1998 so it stays in sync with the ../bfd/hosts database.
1999
2000 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2001
2002 * configure.in: use cpu-vendor-os triple instead of nested cases
2003
2004 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2005
2006 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2007 *always* the wrong one.
2008
2009 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2010
2011 * z8kgen.c: added copyright info
2012
2013 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2014
2015 * z8k-dis.c (unparse_instr): prettier tabs
2016 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2017
2018 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2019
2020 * configure.in: Add ncr* configuration.
2021 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2022 picayune ANSI compilers happy.
2023
2024 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2025
2026 * configure.in (i386): Make i386 and i486 synonymous for now.
2027 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2028
2029 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2030
2031 * Makefile.in (install): Fix typo.
2032
2033 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2034
2035 * Makefile.in (make): Remove obsolete crud.
2036 (sparc-opc.o): Avoid Sun Make VPATH bug.
2037
2038 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2039
2040 * Makefile.in: since there are no SUBDIRS, remove rule and
2041 references of subdir_do.
2042
2043 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2044
2045 * Makefile.in (install): Get the library name right here too.
2046 Don't install bfd.h, since it's unrelated to this library. No
2047 subdirs to recurse into, either.
2048 (CFILES): The source file has a .c suffix, not .o.
2049
2050 * sparc-opc.c: New file, moved from BFD.
2051 * Makefile.in (OFILES): Build it.
2052
2053 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2054
2055 * z8k-dis.c: fixed forward refferences of some declarations.
2056
2057 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2058
2059 * Makefile.in: get the name of the library right
2060
2061 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2062
2063 * z8k-dis.c: knows how to disassemble z8k stuff
2064 * z8k-opc.h: new file full of z8000 opcodes
2065
2066 \f
2067 Local Variables:
2068 version-control: never
2069 End:
This page took 0.106141 seconds and 4 git commands to generate.