1 Mon Mar 6 19:52:05 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
3 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
5 2000-03-02 J"orn Rennecke <amylaar@cygnus.co.uk>
7 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
8 flag to determine if operand is pc-relative.
11 (REL6S3): Renamed from IMM6S3.
12 Added flag OPERAND_PCREL.
13 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
14 added flag OPERAND_PCREL.
15 (IMM12S3U): Replaced with REL12S3.
16 (SHORT_D2, LONG_D): Delay target is pc-relative.
17 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
18 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
19 using the REL* operands.
20 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
21 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
22 LONG_Db, using REL* operands.
23 (SHORT_U, SHORT_A5S): Removed stray alternatives.
24 (d30v_opcode_table): Use new *r formats.
26 2000-02-28 Nick Clifton <nickc@cygnus.com>
28 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
29 'signed_overflow_ok_p'.
31 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
33 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
34 name of the libtool directory.
35 * Makefile.in: Rebuild.
37 2000-02-24 Nick Clifton <nickc@cygnus.com>
39 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
40 (cgen_clear_signed_overflow_ok): New function.
41 (cgen_signed_overflow_ok_p): New function.
43 2000-02-23 Andrew Haley <aph@cygnus.com>
45 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
46 m32r-ibld.c,m32r-opc.h: Rebuild.
48 2000-02-23 Linas Vepstas <linas@linas.org>
50 * i370-dis.c, i370-opc.c: New.
52 * disassemble.c (ARCH_i370): Define.
53 (disassembler): Handle it.
55 * Makefile.am: Add support for Linux/IBM 370.
56 * configure.in: Likewise.
58 * Makefile.in: Regenerate.
59 * configure: Likewise.
61 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
63 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
64 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
67 1999-12-30 Andrew Haley <aph@cygnus.com>
69 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
71 * mips-opc.c (G6): New define.
72 (mips_builtin_op): Add "move" definition for -gp32.
74 2000-02-22 Ian Lance Taylor <ian@zembu.com>
76 From Grant Erickson <gerickso@Brocade.COM>:
77 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
79 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
81 * dis-buf.c (buffer_read_memory): Change `length' param and all int
84 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
86 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
87 (print_insn_ppi): Likewise.
88 (print_insn_shx): Use info->mach to select appropriate insn set.
89 Add support for sh-dsp. Remove FD_REG_N support.
90 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
91 (sh_arg_type): Likewise. Remove FD_REG_N.
92 (sh_dsp_reg_nums): New enum.
93 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
94 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
95 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
96 (arch_sh3_dsp_up): Likewise.
97 (sh_opcode_info): New field: arch.
98 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
99 D_REG_N. Fill in arch field. Add sh-dsp insns.
101 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
103 * arm-dis.c: Change flavor name from atpcs-special to
104 special-atpcs to prevent name conflict in gdb.
105 (get_arm_regname_num_options, set_arm_regname_option,
106 get_arm_regnames): New functions. API to access the several
107 flavor of register names. Note: Used by gdb.
108 (print_insn_thumb): Use the register name entry from the currently
109 selected flavor for LR and PC.
111 2000-02-10 Nick Clifton <nickc@cygnus.com>
113 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
115 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
116 "mulsh.h" instructions.
117 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
119 (print_insn_mcore): Add support for little endian targets.
120 Add support for MULSH and OPSR classes.
122 2000-02-07 Nick Clifton <nickc@cygnus.com>
124 * arm-dis.c (parse_arm_diassembler_option): Rename again.
125 Previous delat did not take.
127 2000-02-03 Timothy Wall <twall@redhat.com>
129 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
130 to adjust target address bounds checking and calculate the
131 appropriate octet offset into data.
133 2000-01-27 Nick Clifton <nickc@redhat.com>
135 * arm-dis.c: (parse_disassembler_option): Rename to
136 parse_arm_disassembler_option and allow to be exported.
138 * disassemble.c (disassembler_usage): New function: Print out any
139 target specific disassembler options.
140 Call arm_disassembler_options() if the ARM architecture is being
143 * arm-dis.c (NUM_ELEM): Define this macro if not already
145 (arm_regname): New struct type for ARM register names.
146 (arm_toggle_regnames): Delete.
147 (parse_disassembler_option): Use register name structure.
148 (print_insn): New function: Combines duplicate code found in
149 print_insn_big_arm and print_insn_little_arm.
150 (print_insn_big_arm): Call print_insn.
151 (print_insn_little_arm): Call print_insn.
152 (print_arm_disassembler_options): Display list of supported,
153 ARM specific disassembler options.
155 2000-01-27 Thomas de Lellis <tdel@windriver.com>
157 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
158 ARM_STT_16BIT flag as Thumb code symbols.
160 * arm-dis.c (printf_insn_little_arm): Ditto.
162 2000-01-25 Thomas de Lellis <tdel@windriver.com>
164 * arm-dis.c (printf_insn_thumb): Prevent double dumping
165 of raw thumb instructions.
167 2000-01-20 Nick Clifton <nickc@cygnus.com>
169 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
171 2000-01-03 Nick Clifton <nickc@cygnus.com>
173 * arm-dis.c (streq): New macro.
175 (force_thumb): ew local variable.
176 (parse_disassembler_option): New function: Parse a single, ARM
177 specific disassembler command line switch.
178 (parse_disassembler_option): Call parse_disassembler_option to
179 parse individual command line switches.
180 (print_insn_big_arm): Check force_thumb.
181 (print_insn_little_arm): Check force_thumb.
183 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
185 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
187 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
189 * m10300-opc.c, m10300-dis.c: Add am33 support.
191 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
193 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
194 (print_insn_hppa): Handle 'B' operand.
196 1999-11-22 Nick Clifton <nickc@cygnus.com>
198 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
200 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
202 * mips-opc.c (I5): New.
203 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
204 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
205 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
207 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
209 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
210 * arm-opc.h (print_insn_arm): Added comment documenting
211 the 'X' format just added to arm-dis.c.
213 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
215 * mips-opc.c (la): Create a version that just uses addiu directly.
216 (dla): Expand to daddiu if possible.
218 1999-11-11 Nick Clifton <nickc@cygnus.com>
220 * mips-opc.c: Add ssnop pattern.
222 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
224 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
226 1999-10-29 Nick Clifton <nickc@cygnus.com>
228 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
229 (d30v_format_tab): Define the SHORT_AR format.
231 1999-10-28 Nick Clifton <nickc@cygnus.com>
233 * mcore-dis.c: Remove spurious code introduced in previous delta.
235 1999-10-27 Scott Bambrough <scottb@netwinder.org>
237 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
239 1999-10-18 Michael Meissner <meissner@cygnus.com>
241 * alpha-opc.c (alpha_operands): Fill in missing initializer.
242 (alpha_num_operands): Convert to unsigned.
243 (alpha_num_opcodes): Ditto.
244 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
249 (extract_bdisp): Ditto.
250 (extract_jhint): Ditto.
251 (extract_ev6hwjhint): Ditto.
253 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
255 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
258 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
260 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
262 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
264 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
265 rac/rachi instructions.
266 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
269 1999-10-04 Doug Evans <devans@casey.cygnus.com>
271 * fr30-asm.c,fr30-desc.h: Rebuild.
272 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
273 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
275 1999-09-29 Nick Clifton <nickc@cygnus.com>
277 * sh-opc.h: Fix bit patterns for several load and store
280 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
282 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
283 cleaner code using completer prefixes. Add 'Y'.
285 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
287 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
289 * hppa-dis.c (extract_22): New function.
291 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
293 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
295 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
297 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
299 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
301 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
303 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
305 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
307 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
309 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
311 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
313 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
316 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
318 * hppa-dis.c: (print_insn_hppa): Add missing break after
321 * hppa-dis.c: Finish constifying various completers, register
324 1999-09-14 Michael Meissner <meissner@cygnus.com>
326 * configure.in (Canonicalization of target names): Remove adding
327 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
328 generates $ac_config_sub with a ${CONFIG_SHELL} already.
329 * configure: Regenerate.
331 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
333 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
335 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
337 1999-09-07 Nick Clifton <nickc@cygnus.com>
339 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
340 names for the mulu and muls patterns.
342 1999-09-04 Steve Chamberlain <sac@pobox.com>
344 * pj-opc.c: New file.
345 * pj-dis.c: New file.
346 * disassemble.c (disassembler): Handle bfd_arch_pj.
347 * configure.in: Handle bfd_pj_arch.
348 * Makefile.am: Rebuild dependencies.
349 (CFILES): Add pj-dis.c and pj-opc.c.
350 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
351 * configure, Makefile.in: Rebuild.
353 1999-09-04 H.J. Lu <hjl@gnu.org>
355 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
357 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
359 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
361 1999-08-04 Doug Evans <devans@casey.cygnus.com>
363 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
364 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
365 * m32r-opinst.c: Rebuild.
367 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
369 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
370 register args by 'f'.
372 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
374 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
375 extract_10U_store): New.
376 (print_insn_hppa): Add new completers.
378 * hppa-dis.c (signed_unsigned_names,mix_half_names,
379 saturation_names): New.
380 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
382 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
384 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
386 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
387 to decide to print a space.
389 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
391 * i386-dis.c: Add AMD athlon instruction support.
393 1999-08-10 Ian Lance Taylor <ian@zembu.com>
395 From Wally Iimura <iimura@microunity.com>:
396 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
397 overflow at end of address space.
398 (generic_print_address): Use sprintf_vma.
400 1999-08-08 Ian Lance Taylor <ian@zembu.com>
402 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
403 MKDEP. Rebuild dependencies.
404 * Makefile.in: Rebuild.
406 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
408 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
409 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
410 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
411 (print_insn_hppa): Add 64 bit condition completers.
413 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
415 * hppa-dis.c (print_insn_hppa): Change condition args to use
418 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
420 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
423 1999-07-21 Ian Lance Taylor <ian@zembu.com>
426 * configure.bat: Remove; obsolete.
428 1999-07-11 Ian Lance Taylor <ian@zembu.com>
430 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
431 (generic_strcat_address): Add cast to avoid warning.
432 * i386-dis.c: Initialize all structure fields to avoid warnings.
433 Add ATTRIBUTE_UNUSED as appropriate.
435 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
437 * sparc-dis.c (print_insn_sparc): Differentiate between
438 addition and oring when guessing symbol for comment.
440 1999-07-05 Nick Clifton <nickc@cygnus.com>
442 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
445 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
447 * i386-dis.c: Mention intel mode specials in macro char comment.
449 1999-06-21 Ian Lance Taylor <ian@zembu.com>
451 * alpha-dis.c: Don't include <stdlib.h>.
452 * arm-dis.c: Include "sysdep.h".
453 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
455 * Makefile.am: Rebuild dependencies.
456 * Makefile.in: Rebuild.
458 1999-06-16 Nick Clifton <nickc@cygnus.com>
460 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
463 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
465 * arm-dis.c (arm_regnames): Turn into a pointer to a register
467 (arm_regnames_standard): New variable: Array of ARM register
468 names according to ARM instruction set nomenclature.
469 (arm_regnames_apcs): New variable: Array of ARM register names
470 according to ARM Procedure Call Standard.
471 (arm_regnames_raw): New variable: Array of ARM register names
472 using just 'r' and the register number.
473 (arm_toggle_regnames): New function: Toggle the chosen register set
475 (parse_disassembler_options): New function: Parse any target
476 disassembler command line options.
477 (print_insn_big_arm): Call parse_disassembler_options if any
479 (print_insn_little_arm): Call parse_disassembler_options if any
482 1999-06-13 Ian Lance Taylor <ian@zembu.com>
484 * i386-dis.c (FWAIT_OPCODE): Define.
485 (used_prefixes): New static variable.
486 (fetch_data): Don't print an error message if we have already
487 fetched some bytes successfully.
488 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
489 (prefix_name): New static function.
490 (print_insn_i386): If setjmp fails, indicating a data error, but
491 we have managed to fetch some bytes, print the first one as a
492 prefix or a .byte pseudo-op. If fwait is followed by a non
493 floating point instruction, print the first prefix. Set
494 used_prefixes when prefixes are used. If any prefixes were not
495 used after disassembling the instruction, print the first prefix
496 instead of printing the instruction.
497 (putop): Set used_prefixes when prefixes are used.
498 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
499 (OP_DIR, OP_SIMD_Suffix): Likewise.
501 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
503 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
504 Support signx %reg, clruw %reg.
506 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
508 * sparc-opc.c: Add aliases Solaris as supports.
510 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
512 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
513 * Makefile.in: Regenerated.
515 1999-06-03 Philip Blundell <philb@gnu.org>
517 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
518 when target is PC-relative.
520 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
522 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
525 * m68k-dis.c (fetch_arg): Add places `n', `o'.
527 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
528 Add mcf5206e to appropriate instructions.
529 Add alias for MAC, MSAC.
531 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
534 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
535 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
537 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
539 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
541 * i386-dis.c (Ed): Define.
542 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
544 (OP_rm): Rename to OP_Rd.
547 (putop): Add const to template and p.
548 (print_insn_x86): Delete.
549 (print_insn_i386): Merge old function print_insn_x86. Add const
551 (struct dis386): Add const to name.
552 (dis386_att, dis386_intel): Add const.
553 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
554 (names32, names16, names8, names_seg, index16): Add const.
555 (grps, prefix_user_table, float_reg): Add const.
556 (float_mem_att, float_mem_intel): Add const.
557 (oappend): Add const to s.
558 (OP_REG): Add const to s.
559 (ptr_reg): Add const to s.
560 (dofloat): Add const to dp.
561 (OP_C): Don't skip modrm, it's now done in OP_Rd.
564 (OP_Rd): Check for valid mod. Call Op_E to print.
565 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
566 (OP_MS): Check for valid mod. Call Op_EM to print.
567 (OP_3DNowSuffix): Set obufp and use oappend rather than
568 strcat. Call BadOp() for errors.
569 (OP_SIMD_Suffix): Likewise.
570 (BadOp): New function.
572 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
574 * i386-dis.c (dis386_intel): Remove macro chars, except for
575 jEcxz. Change cWtR and cRtd to cW and cR.
576 (dis386_twobyte_intel): Remove macro chars here too.
577 (putop): Handle R and W macros for intel mode.
579 * i386-dis.c (SIMD_Fixup): New function.
580 (dis386_twobyte_att): Use it on movlps and movhps, and change
581 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
582 (dis386_twobyte_intel): Same here.
584 * i386-dis.c (Av): Remove.
588 (OP_SIMD_Suffix): New function.
589 (OP_DIR): Remove dead code.
590 (eAX_reg..eDI_reg): Renumber.
591 (onebyte_has_modrm): Table numbering comments.
592 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
593 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
594 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
595 and handle SIMD cmp insns in OP_SIMD_Suffix.
596 (info->bytes_per_line): Bump from 5 to 6.
598 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
599 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
601 PIII SIMD support from Doug Ledford <dledford@redhat.com>
602 * i386-dis.c (XM, EX, None): Define.
603 (OP_XMM, OP_EX, OP_None): New functions.
604 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
605 (GRP14): Rename to GRPAMD.
606 (GRP*): Add USE_GROUPS flag.
608 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
609 (twobyte_has_modrm): Add SIMD entries.
610 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
611 (grps): Add SIMD insns.
612 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
613 oappend repz if uses_f3_prefix. Add code to handle new groups for
616 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
617 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
618 operand from Av to Jv.
620 1999-05-07 Nick Clifton <nickc@cygnus.com>
622 * mcore-dis.c (print_insn_mcore): Use .short to display
623 unidentified instructions, not .word.
625 1999-04-26 Tom Tromey <tromey@cygnus.com>
627 * aclocal.m4, configure: Updated for new version of libtool.
629 1999-04-14 Doug Evans <devans@casey.cygnus.com>
631 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
632 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
634 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
636 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
639 1999-04-10 Doug Evans <devans@casey.cygnus.com>
641 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
642 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
644 1999-04-06 Ian Lance Taylor <ian@zembu.com>
646 * opintl.h (LC_MESSAGES): Never define.
648 1999-04-04 Ian Lance Taylor <ian@zembu.com>
650 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
651 (separator_char, scale_char): Likewise.
652 (print_insn_x86): Likewise.
653 (print_insn_i386): Likewise. Add declaration.
655 1999-03-26 Doug Evans <devans@casey.cygnus.com>
657 * fr30-dis.c: Rebuild.
658 * m32r-dis.c: Rebuild.
660 1999-03-23 Ian Lance Taylor <ian@zembu.com>
662 * m68k-opc.c: Change compare instructions to use "@s" rather than
663 ";s" when used with an immediate operand.
665 1999-03-22 Doug Evans <devans@casey.cygnus.com>
667 * cgen-opc.c (cgen_set_cpu): Delete.
668 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
669 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
671 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
673 * po/opcodes.pot: Rebuild.
675 1999-03-16 Martin Hunt <hunt@cygnus.com>
677 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
679 1999-03-11 Doug Evans <devans@casey.cygnus.com>
681 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
682 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
683 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
684 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
685 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
686 * m32r-opinst.c: Rebuild.
688 1999-02-25 Doug Evans <devans@casey.cygnus.com>
690 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
691 (cgen_hw_lookup_by_num): Rewrite.
692 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
693 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
694 * m32r-opinst.c: Rebuild.
696 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
698 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
699 (insert_jhint): Fix insertion mask.
700 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
702 1999-02-10 Doug Evans <devans@casey.cygnus.com>
704 * Makefile.in: Rebuild.
706 1999-02-09 Doug Evans <devans@casey.cygnus.com>
708 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
709 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
710 * Makefile.am: Remove references to them.
711 (HFILES): Add fr30-desc.h,m32r-desc.h.
712 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
714 (ALL_MACHINES): Update.
715 * configure.in: Redo handling of cgen_files.
716 (bfd_i960_arch): Delete i960c-*.lo files.
717 * configure: Regenerate.
718 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
719 (hash_insn_array): Rewrite.
720 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
721 (hash_insn_array): Rewrite.
722 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
723 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
724 (cgen_lookup_get_insn_operands): Ditto.
725 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
726 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
727 * po/POTFILES.in: Rebuild.
728 * po/opcodes.pot: Rebuild.
730 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
732 * Makefile.am: Rebuild dependencies.
733 (HFILES): Add fr30-opc.h.
734 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
735 * Makefile.in: Rebuild.
737 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
738 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
740 * acconfig.h: Remove.
741 * configure: Rebuild with current autoconf/automake.
742 * aclocal.m4: Likewise.
743 * config.in: Likewise.
744 * Makefile.in: Likewise.
746 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
748 * m68k-opc.c: Correct move (not movew) to status word on 5200.
750 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
752 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
753 * i386-dis.c (x_mode): Define.
757 (dis386_twobyte): Remove.
758 (dis386_twobyte_att): New.
759 (dis386_twobyte_intel): New.
760 (print_insn_x86): Use new arrays.
762 (float_mem_intel): New.
763 (float_mem_att): New.
764 (dofloat): Use new float_mem arrays.
765 (print_insn_i386_att): New.
766 (print_insn_i386_intel): New.
767 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
768 (putop): Handle intel syntax.
769 (OP_indirE): Handle intel syntax.
770 (OP_E): Handle intel syntax.
771 (OP_I): Handle intel syntax.
772 (OP_sI): Handle intel syntax.
773 (OP_OFF): Handle intel syntax.
777 1999-01-27 Doug Evans <devans@casey.cygnus.com>
779 * fr30-opc.h,fr30-opc.c: Rebuild.
780 * i960c-opc.h,i960c-opc.c: Rebuild.
781 * m32r-opc.c: Rebuild.
783 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
785 * hppa-dis.c: revert HP merge changes until HP gives us
788 1999-01-19 Nick Clifton <nickc@cygnus.com>
790 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
791 offsets as well as symbloic address.
793 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
795 * hppa-dis.c: fix comments and some indentation.
797 1999-01-12 Doug Evans <devans@casey.cygnus.com>
799 * fr30-opc.c,i960c-opc.c: Regenerate.
801 1999-01-11 Doug Evans <devans@casey.cygnus.com>
803 * fr30-opc.c: Regenerate.
805 1999-01-06 Doug Evans <devans@casey.cygnus.com>
807 * m32r-dis.c: Regenerate.
809 1999-01-05 Doug Evans <devans@casey.cygnus.com>
811 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
812 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
813 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
815 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
817 * configure.in: Require autoconf 2.12.1 or higher.
819 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
821 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
823 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
825 * fr30-opc.c: Regenerated.
827 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
829 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
831 1998-12-15 Dave Brolley <brolley@cygnus.com>
833 * fr30-opc.c,fr30-opc.h: Regenerated.
835 1998-12-14 Dave Brolley <brolley@cygnus.com>
837 * fr30-opc.c,fr30-opc.h: Regenerated.
839 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
841 * fr30-opc.c,fr30-opc.h: Regenerated.
843 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
845 * m32r-opc.c: Regenerate.
847 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
849 * dis-buf.c (generic_strcat_address): reformat to GNU coding
850 conventions. change sprintf call to an sprintf_vma call.
852 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
854 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
856 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
858 The following changes were made by
859 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
860 David Taylor <taylor@texas.cygnus.com>, and
861 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
862 merge in changes by HP; HP did not create ChangeLog entries.
864 * dis-buf.c (generic_strcat_address): new function.
866 * hppa-dis.c: Changes to improve hppa disassembly.
867 Changed formatting in : reg_names, fp_reg_names,control_reg,
868 New variables : sign_extension_names, deposit_names, conversion_names
869 float_test_names, compare_cond_names_double, add_cond_names_double,
870 logical_cond_names_double, unit_cond_names_double,
871 branch_push_pop_names, saturation_names, shift_names, mix_names,
872 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
873 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
874 (fput_const): renamed as fput_hex_const
876 - use the macros fputs_filtered and
877 fput_decimal_const whenever possible; calls to sign_extend require
878 2 params -- add a missing second param of 0.
879 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
880 architecture version number of current machine. HP folks are
881 trying to handle situation where the target program was compiled
882 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
884 - added new cases : 'g', 'B', 'm'
885 - added cases specifically for PA 2.0
886 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
887 - calls to fput_const become calls to fput_hex_const
889 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
891 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
892 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
893 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
894 * Makefile.in: Rebuilt.
895 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
897 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
898 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
900 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
902 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
904 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
906 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
908 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
909 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
911 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
913 * fr30-opc.c: Regenerate.
915 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
917 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
919 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
921 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
923 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
925 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
927 1998-11-30 Doug Evans <devans@casey.cygnus.com>
929 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
930 CGEN_INSN_BASE_VALUE.
931 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
932 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
934 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
936 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
938 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
940 * fr30-asm.c,fr30-dis.c: Regenerated.
942 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
944 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
946 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
948 * fr30-opc.c: Regenerated.
950 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
952 * fr30-opc.c: Regenerated.
953 * fr30-opc.h: Regenerated.
954 * fr30-dis.c: Regenerated.
955 * fr30-asm.c: Regenerated.
957 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
959 * mips-opc.c (sync.p,sync.l): Swap insn values.
961 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
963 * fr30-opc.c: Regenerate.
965 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
967 * fr30-opc.c: Regenerated.
968 * fr30-opc.h: Regenerated.
970 1998-11-18 Doug Evans <devans@casey.cygnus.com>
972 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
973 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
975 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
977 * fr30-opc.c: Regenerated.
979 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
981 * fr30-opc.c: Regenerated.
982 * fr30-opc.h: Regenerated.
983 * fr30-dis.c: Regenerated.
984 * fr30-asm.c: Regenerated.
986 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
988 * po/opcodes.pot: Regenerated.
989 * fr30-opc.c: Regenerated.
990 * fr30-opc.h: Regenerated.
991 * fr30-dis.c: Regenerated.
992 * fr30-asm.c: Regenerated.
994 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
996 * disassemble.c (disassembler): Add support for FR30 target.
998 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
1000 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
1001 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
1003 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
1005 * po/opcodes.pot: Regenerate.
1006 * po/POTFILES.in: Regenerate.
1007 * fr30-opc.c: Regenerate.
1008 * fr30-opc.h: Regenerate.
1010 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
1012 * m32r-asm.c: Regenerate.
1014 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
1016 * configure.in: Added case for bfd_fr30_arch.
1017 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
1018 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
1019 (CLEANFILES): Added stamp-fr30.
1021 * fr30-asm.c: New file.
1022 * fr30-dis.c: New file.
1023 * fr30-opc.c: New file.
1024 * fr30-opc.h: New file.
1025 * po/POTFILES.in: Regenerated
1026 * po/opcodes.pot: Regenerated
1028 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
1030 * configure.in: detect cygwin* instead of cygwin32*
1031 * configure: regenerate
1033 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
1035 * mips-opc.c (IS_M): Added.
1037 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
1039 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1041 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
1043 * m32r-opc.h,m32r-opc.c: Regenerate.
1045 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1047 * i386-dis.c (OP_3DNowSuffix): New static function.
1050 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1051 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1052 (insn_codep): New static variable.
1053 (print_insn_x86): Init insn_codep after prefixes.
1054 (grps): Add GRP14 entries for prefetch, prefetchw.
1057 From Jeff B Epler <jepler@usgs.gov>
1058 * i386-dis.c (Suffix3DNow): New table.
1060 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1062 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1064 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1066 * d10v-dis.c (print_operand): If num is nonzero, then
1067 add OPERAND_ACC1, not OPERAND_ACC0.
1069 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1071 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1074 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1076 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1079 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1081 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1083 1998-09-09 Michael Meissner <meissner@cygnus.com>
1085 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1088 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1090 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1092 (print_insn_little_arm): Detect Thumb symbols in elf object
1095 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1097 * alpha-dis.c (print_insn_alpha): Use the machine type to
1098 decide which PALcode set to include.
1100 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1102 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1104 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1106 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1107 MSUB and MSUBS instructions.
1109 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1111 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1112 operand name macros.
1114 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1116 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1117 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1118 +, -, and d for ColdFire.
1120 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1121 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1122 (extract_mbe): Likewise.
1124 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1126 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1128 * m10300-opc.c: First cut at UDF instructions.
1130 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1132 * m32r-opc.c: Regenerate (remove semantic descriptions).
1134 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1136 * arm-dis.c (print_insn_big_arm): Fix indentation.
1137 (print_insn_little_arm): Likewise.
1139 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1141 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1143 (print_insn_little_arm): Likewise.
1145 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1147 Move all global state data into opcode table struct, and treat
1148 opcode table as something that is "opened/closed".
1149 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1150 (cgen_asm_init): Delete.
1151 (cgen_set_parse_operand_fn): New function.
1152 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1153 (cgen_dis_init): Delete.
1154 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1155 (cgen_current_{opcode_table_mach,endian}): Delete.
1156 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1158 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1160 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1163 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1165 * m10300-opc.c: Add entries for "no_match_operands" field in
1168 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1170 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1172 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1174 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1176 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1178 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1180 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1182 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1183 will be masked later.
1185 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1187 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1189 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1191 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1193 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1195 * m10300-dis.c: Only recognize instructions from the currently
1197 * m10300-opc.c: Add field indicating the particular variant of
1198 the mn10300 each instruction is available on.
1200 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1202 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1203 * Makefile.am: Rebuild dependencies.
1204 (CFILES): Add vax-dis.c.
1205 (ALL_MACHINES): Add vax-dis.lo.
1206 * aclocal.m4: Rebuild with current libtool.
1207 * configure, Makefile.in: Rebuild.
1209 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1211 * vax-dis.c: New file, from work by Pauline Middelink
1212 <middelin@polyware.iaf.nl>.
1213 * disassemble.c (ARCH_vax): Define if ARCH_all.
1214 (disassembler): Add case for ARCH_vax.
1215 * makefile.vms: Support compilation on vms/vax.
1217 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1219 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1220 related to sign extension and the size of ints.
1222 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1224 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1225 instructions. Support (sp) addressing mode by expanding it into
1228 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1230 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1232 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1234 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1236 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1238 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1241 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1243 * mips-dis.c (print_insn_little_mips): Previously, instruction
1244 printing references the symbol table to determine whether the
1245 instruction resides in a block regular instructions or mips16
1246 instructions. However, when the disassembler gets used in other
1247 environments where the symbol table is not present, we no longer
1248 rely in the symbol table, rather, use the low bit of the
1249 instructions address to guess. There should be no change for usage
1250 of the disassembler in host based programs, gdb, objdump.
1251 (print_insn_big_mips): ditto.
1252 (print_insn_mips): ditto
1254 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1256 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1258 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1260 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1262 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1264 * i386-dis.c (index16): Add '%' to register names. Use ','
1267 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1269 * i386-dis.c: Don't print opcode suffix when we can figure out the
1270 size (and gas can!) by register operands, or from the default
1272 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1274 (dis386, dis386_twobyte, grps): Use new suffix macros.
1275 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1276 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1277 order of cmps operands to agree with Intel docs. Correct operand
1278 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1279 agree with Intel docs.
1280 (print_insn_x86): Print orphan fwait before other prefixes.
1281 Return correct byte count for orphan fwait with prefixes. Don't
1282 print `bound' operands in reverse order.
1283 (ckprefix): Stop accumulating prefixes if we get fwait.
1284 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1286 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1288 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1289 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1291 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1293 Fix problems when bfd_vma is wider than long.
1294 * i386-dis.c: Make op_address and start_pc unsigned.
1295 (set_op): Make parameter unsigned.
1296 (print_insn_x86): Cast to bfd_vma when passing a value to
1298 * ns32k-dis.c (CORE_ADDR): Don't define.
1299 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1300 bfd_scan_vma to read back address.
1301 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1303 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1304 (NEXTULONG): New definition.
1305 (print_insn_m68k): Avoid overflow when computing third argument of
1307 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1308 Use disp instead of val to store offset values.
1309 (print_indexed): Use base_disp instead of word to store base
1310 displacement, to avoid overflow.
1311 * m10300-dis.c (disassemble): Cast value to long when computing
1312 pc-relative address, to get correct sign extension.
1314 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1316 * m32r-opc.c: Regenerate.
1318 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1320 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1321 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1323 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1325 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1327 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1329 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1331 (OP_DSreg): Rename from OP_DSSI.
1332 (OP_ESreg): Rename from OP_ESDI.
1333 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1335 (append_seg): Rename from append_prefix.
1336 (ptr_reg): New function.
1337 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1339 (PREFIX_ADDR): Rename from PREFIX_ADR.
1340 (float_reg): Add non-broken opcodes for people who don't want
1343 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1345 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1348 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1350 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1352 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1354 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1355 0; produce error message for shifts of size 32 (or 64 for 64-bit
1356 shifts), because the hardware doesn't support them.
1358 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1360 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1361 LONG_2, LONG_2b formats to use this new operand.
1363 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1365 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1367 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1369 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1370 endian data support.
1372 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1374 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1375 and SHORT_B3b formats to use Rb instead of Ra.
1377 Add FLAG_MUL16 to MUL2XH opcode.
1379 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1380 to existing 1.1.1 parallelisation prohibition procedure.
1382 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1384 * m32r-asm.c,m32r-dis.c: Regenerate.
1386 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1388 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1389 with a shift count of 0.
1391 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1393 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1394 (cgen_hw_lookup_by_num): New function.
1396 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1398 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1400 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1402 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1403 as big-endian on SPARClite.
1405 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1407 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1409 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1411 * po/Make-in (install-info): New target.
1413 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1415 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1416 * configure: Rebuild.
1418 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1420 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1421 variety of ISA2 instructions to set bottom ten bits of trap code.
1423 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1425 * Makefile.am (config.status): Add explicit target so that
1426 config.status depends upon bfd/configure.in.
1427 * Makefile.in: Rebuild.
1429 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1431 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1432 instructions to set bottom ten bits of break code.
1433 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1434 for above optional argument.
1436 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1438 * makefile.vms: Run dec c with /nodebug.
1440 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1442 * Makefile.in: Rebuilt.
1443 * Makefile.am: Regenerated dependencies with mkdep.
1445 * opintl.h (_): Define as dgettext.
1447 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1449 * cgen-asm.c: Internationalised.
1450 * m32r-asm.c: Internationalised.
1451 * m32r-dis.c: Internationalised.
1452 * m32r-opc.c: Internationalised.
1454 * aclocal.m4: Regenerated.
1455 * configure: Regenerated.
1456 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1457 * Makefile.in: Rebuild.
1458 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1459 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1461 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1463 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1465 * aclocal.m4, configure: Rebuild with current tools.
1467 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1469 * opintl.h: New file - contains internationalisation macros used
1470 by source files in this directory.
1471 * po/: New subdirectory - contains internationalisation files.
1472 * po/Make-in: New file - Makefile constructor.
1473 * po/POTFILES.in: New file - list of files in opcodes directory
1474 that should be scan for internationalisation macros.
1475 * po/opcodes.pot: New file - list of internationisation strings
1476 found in files mentioned in po/POTFILES.in.
1477 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1478 entry. Add intl directory to include paths.
1479 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1480 HAVE_STRCPY, HAVE_LC_MESSAGES
1481 * configure.in: Add rule to build Makefile in po subdirectory.
1482 * Makefile.in: Rebuilt.
1483 * aclocal.m4: Rebuilt.
1484 * config.in: Rebuilt.
1485 * configure: Rebuilt.
1486 * alpha-opc.c: Internationalised.
1487 * arc-dis.c: Internationalised.
1488 * arc-opc.c: Internationalised.
1489 * arm-dis.c: Internationalised.
1490 * cgen-asm.c: Internationalised.
1491 * d30v-dis.c: Internationalised.
1492 * dis-buf.c: Internationalised.
1493 * h8300-dis.c: Internationalised.
1494 * h8500-dis.c: Internationalised.
1495 * i386-dis.c: Internationalised.
1496 * m10200-dis.c: Internationalised.
1497 * m10300-dis.c: Internationalised.
1498 * m68k-dis.c: Internationalised.
1499 * m88k-dis.c: Internationalised.
1500 * mips-dis.c: Internationalised.
1501 * ns32k-dis.c: Internationalised.
1502 * opintl.h: Internationalised.
1503 * ppc-opc.c: Internationalised.
1504 * sparc-dis.c: Internationalised.
1505 * v850-dis.c: Internationalised.
1506 * v850-opc.c: Internationalised.
1508 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1510 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1511 (asm_hash_table_entries): New variable.
1512 (cgen_asm_init): Free asm_hash_table_entries.
1513 (hash_insn_array,hash_insn_list): New functions.
1514 (build_asm_hash_table): Use them. Hash macro insns as well.
1515 (cgen_asm_lookup_insn): Update.
1516 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1517 (dis_hash_table_entries): New variable.
1518 (cgen_dis_init): Free dis_hash_table_entries.
1519 (hash_insn_array,hash_insn_list): New functions.
1520 (build_dis_hash_table): Use them. Hash macro insns as well.
1521 (cgen_dis_lookup_insn): Update.
1522 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1523 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1524 (cgen_macro_insn_count): New function.
1525 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1527 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1529 * i386-dis.c (OP_DSSI): Print segment override.
1531 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1533 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1536 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1538 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1539 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1540 * configure.in: Define and substitute WIN32LDFLAGS and
1542 * aclocal.m4: Rebuild with new libtool.
1543 * configure, Makefile.in: Rebuild.
1545 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1547 * m32r-opc.c: Regenerate.
1549 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1551 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1552 before trying to copy it.
1553 * Makefile.in: Rebuild.
1555 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1557 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1559 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1561 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1562 from an arbitrary valid buffer instead of fetching them on demand
1564 (invalid_float): use bit_extract_simple() instead of bit_extract().
1566 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1568 From H.J. Lu <hjl@gnu.org>:
1569 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1572 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1574 * Branched binutils 2.9.
1576 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1578 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1579 disassembling last 4 bytes of a section.
1581 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1583 Fix some gcc -Wall warnings:
1584 * arc-dis.c (print_insn): Add casts to avoid warnings.
1585 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1586 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1587 * m10200-dis.c (disassemble): Likewise.
1588 * m10300-dis.c (disassemble): Likewise.
1589 * ns32k-dis.c (print_insn_ns32k): Likewise.
1590 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1591 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1592 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1593 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1594 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1595 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1596 * tic80-dis.c (print_one_instruction): Likewise.
1597 * w65-dis.c (print_operand): Likewise.
1598 * z8k-dis.c (fetch_data): Likewise.
1599 * a29k-dis.c: Add return type for find_byte_func_type.
1600 * arc-opc.c: Include <stdio.h>. Remove declarations of
1601 insert_multshift and extract_multshift.
1602 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1604 (extract_value): Fully parenthesize expression.
1605 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1606 * h8500-opc.h (h8500_table): Fully bracket initializer.
1607 * w65-opc.h (optable): Likewise.
1608 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1609 * i386-dis.c (OP_E): Initialize local variables.
1610 * m10200-dis.c (print_insn_mn10200): Likewise.
1611 * mips-dis.c (print_insn_mips16): Likewise.
1612 * sh-dis.c (print_insn_shx): Likewise.
1613 * v850-dis.c (print_insn_v850): Likewise.
1614 * ns32k-dis.c (print_insn_arg): Declare.
1615 (get_displacement, invalid_float): Declare.
1616 (list_search, sign_extend, flip_bytes): Declare return type.
1617 (get_displacement): Likewise.
1618 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1620 (print_insn_ns32k): Make i unsigned.
1621 (invalid_float): Make static. Declare type of val.
1622 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1623 on each for iteration.
1624 * tic30-dis.c (get_indirect_operand): Likewise.
1625 * z8k-dis.c (print_insn_z8001): Declare return type.
1626 (print_insn_z8002): Likewise.
1627 (unparse_instr): Fix sprintf format strings.
1629 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1631 * mips-opc.c: Add "sync.l" and "sync.p".
1633 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1635 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1636 default m68k variant to recognize.
1638 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1639 (ctrl, cobr, mem, ea): Likewise.
1640 (print_addr): Likewise. Remove cast.
1641 (ea): Cast argument of print_addr to bfd_vma.
1643 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1645 (cgen_parse_unsigned_integer): Likewise.
1646 (cgen_parse_address): Likewise.
1648 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1650 * i960-dis.c (ctrl): Add full braces to structure initialization.
1651 (cobr, mem, reg): Likewise.
1652 (ea): Correct parenthesization in expression.
1654 * cgen-asm.c: Include <ctype.h>.
1655 (build_asm_hash_table): Remove unused local variable i.
1656 (cgen_parse_keyword): Add casts to avoid warnings.
1658 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1659 symbol. Fix indentation.
1660 (print_insn_little_arm): Likewise.
1662 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1664 * configure.in: Use AM_DISABLE_SHARED.
1665 * aclocal.m4, configure: Rebuild with libtool 1.2.
1667 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1669 These patches are courtesy of Jonathan Walton and Tony Thompson
1670 (athompso@cambridge.arm.com).
1672 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1675 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1676 both the offset and the label closest to the destination.
1678 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1680 * m32r-opc.h: Regenerate.
1682 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1684 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1686 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1688 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1689 assume that info->symbols is non-empty.
1691 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1693 * alpha-opc.c (cvtqs) There is no such thing.
1694 (cvttq): Missing most of the /*d variants.
1696 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1698 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1699 delayed branches or jumps.
1701 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1703 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1705 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1706 * tic30-dis.c (print_branch): Likewise.
1708 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1710 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1711 saved_symbol code as it is no longer needed.
1713 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1715 * cgen-asm.c: Include symcat.h.
1716 * cgen-dis.c,cgen-opc.c: Ditto.
1717 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1719 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1721 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1723 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1725 * m32r-opc.[ch]: Regenerate.
1727 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1729 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1730 arguments. Don't perform validation here.
1731 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1733 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1735 * m32r-opc.c: Regenerate.
1737 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1739 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1740 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1742 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1744 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1746 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1748 * configure.in: Get the version number from BFD.
1749 * configure: Rebuild.
1751 From H.J. Lu <hjl@gnu.org>:
1752 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1753 * Makefile.in: Rebuild.
1755 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1757 * m32r-opc.c: Regenerate.
1758 * m32r-opc.h: Regenerate.
1760 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1762 * m32r-opc.c: Regenerate.
1764 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1766 Fix rac to accept only a0:
1767 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1768 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1769 Introduce OPERAND_GPR.
1770 * d10v-dis.c (print_operand): Likewise.
1772 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1774 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1775 (cgen_hw_lookup): Make result const.
1776 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1778 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1780 * configure, aclocal.m4: Rebuild with new libtool.
1782 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1784 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1785 instructions use a PC relative branch, not absolute.
1787 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1789 * configure.in: Set libtool_enable_shared rather than
1790 libtool_shared. Remove diversion hack.
1791 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1793 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1795 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1796 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1798 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1800 * tic30-dis.c: New file.
1801 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1802 * configure.in: Handle bfd_tic30_arch.
1803 * Makefile.am: Rebuild dependencies.
1804 (CFILES): Add tic30-dis.c
1805 (ALL_MACHINES): Add tic30-dis.lo.
1806 * configure, Makefile.in: Rebuild.
1808 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1810 * m32r-opc.h (HAVE_CPU_M32R): Define.
1812 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1814 * v850-opc.c (insertion routines): If both alignment and size is
1815 wrong then report this.
1817 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1819 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1820 Only recognize instructions for the current target_processor.
1822 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1824 * d10v-dis.c (PC_MASK): Correct value.
1825 (print_operand): If there's a reloc, don't calculate the
1826 address because they could be in different sections.
1828 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1830 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1831 instruction after the 4650's "mul" instruction; nobody's using the
1832 4010 these days. If object files someday indicate which processor
1833 variant they're intended for, we can do a better job at this.
1835 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1837 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1838 table provided entry size. Use CGEN_INSN_MNEMONIC.
1839 (cgen_parse_keyword): Rewrite.
1840 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1841 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1842 * cgen-opc.c: Clean up pass over `struct foo' usage.
1843 (cgen_keyword_lookup_value): Handle "" entry.
1844 (cgen_keyword_add): Likewise.
1846 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1848 * mips-opc.c: Add FP_D to s.d instruction flags.
1850 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1852 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1854 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1856 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1857 PC relative offset forms before the 15 bit forms. An assembler command
1858 line option now chooses the default.
1860 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1862 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1863 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1865 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1867 * configure: Only build libopcodes shared if --enable-shared's value
1868 was `yes', or was set to `*opcodes*'.
1869 * aclocal.m4: Likewise.
1870 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1871 original source of this bit of code. It's not clear what the best fix
1874 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1876 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1877 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1878 offset forms before the 15 bit forms, to default to the long forms.
1880 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1882 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1884 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1886 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1887 symbol if none is present.
1888 (print_insn_big_arm): Prevent examination of stored symbol if
1891 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1893 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1895 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1897 * disassemble.c: Remove disasm_symaddr() function.
1899 * arm-dis.c: Use info->symbol instead of info->flags to determine
1900 if disassmbly should be in Thumb or Arm mode.
1902 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1904 * arm-dis.c: Add support for disassembling Thumb opcodes.
1905 (print_insn_thumb): New function.
1907 * disassemble.c (disasm_symaddr): New function.
1909 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1910 (thumb_opcodes): Table of Thumb opcodes.
1912 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1914 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1916 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1917 and 'v' as operand types.
1919 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1921 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1922 <olivier.carmona@di.epfl.ch>.
1923 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1924 which has a two word opcode with a one word argument.
1926 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1928 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1929 unsigned, not signed.
1930 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1932 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1934 * d10v-dis.c (print_operand):
1935 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1937 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1939 * d10v-opc.c (OPERAND_FLAG): Split into:
1940 (OPERAND_FFLAG, OPERAND_CFLAG) .
1944 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1946 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1947 field for all INSN_MACRO's.
1948 * mips16-opc.c: same
1950 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1952 * mips-opc.c (sync,cache): These are 3900 insns.
1954 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1956 sh-opc.h (sh_table): Remove ftst/nan.
1958 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1960 * mips-opc.c (ffc, ffs): Fix mask.
1962 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1964 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1967 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1969 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1970 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1972 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1974 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1975 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1977 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1979 * v850-dis.c (disassemble): Replace // with /* ... */
1981 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1983 * sparc-opc.c: Add wr & rd for v9a asr's.
1984 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1985 (v9a_asr_reg_names): New variable.
1986 Patch from David Miller <davem@vger.rutgers.edu>.
1988 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1990 * sparc-opc.c (v9notv9a): New insn type.
1991 (IMPDEP): Move to the end to not conflict with edge8 et al.
1992 Patch from David Miller <davem@vger.rutgers.edu>.
1994 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1996 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1998 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2000 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2002 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2004 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2005 of disassemble_info structure to determine if an overlay address
2006 has a matching symbol in low memory.
2008 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2009 new symbol_at_address_func field in disassemble_info structure.
2011 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2013 * v850-opc.c (extract_d22): Use signed arithmatic.
2015 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2017 * mips-opc.c: Three op mult is not an ISA insn.
2019 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2021 * mips-opc.c: Fix formatting.
2023 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2025 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2026 than assuming that char is signed. Explicitly sign extend 16 bit
2027 values, rather than assuming that short is 16 bits.
2028 (OP_sI, OP_J, OP_DIR): Likewise.
2030 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2032 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2035 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2037 * v850-opc.c: Fix typo in comment.
2039 * v850-dis.c (disassemble): Add test of processor type when
2040 determining opcodes.
2042 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2044 * configure.in: Use a diversion to set enable_shared before the
2045 arguments are parsed.
2046 * configure: Rebuild.
2048 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2050 * m68k-opc.c (TBL1): Use ! rather than `.
2051 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2053 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2055 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2057 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2059 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2062 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2063 * aclocal.m4: Rebuild with new libtool.
2064 * configure: Rebuild.
2066 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2068 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2070 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2072 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2074 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2076 * v850-opc.c (v850_opcodes): Further rearrangements.
2078 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2080 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2082 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2084 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2087 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2089 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2091 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2093 * v850-opc.c: Initialise processors field of v850_opcode structure.
2095 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2097 Merge changes from Martin Hunt:
2099 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2101 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2102 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2103 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2105 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2107 * d30v-dis.c (print_insn): First operand of d*i (delayed
2108 branch) instructions is relative.
2110 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2111 (d30v_operand_table): Add IMM6S3 type.
2112 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2114 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2115 and cmp instructions.
2117 * d30v-opc.c: Correct entries for repeat*, and sat*.
2118 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2119 types. Correct several formats.
2121 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2123 * d30v-opc.c (pre_defined_registers): Change control registers.
2125 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2126 SHORT_C2. Manual was incorrect.
2128 * d30v-dis.c (lookup_opcode): Return value now indicates
2129 if an opcode has a short and a long form. Used for deciding
2130 to append a ".s" or ".l".
2131 (print_insn): Append a ".s" to an instruction if it is
2132 the short form and ".l" if it is a long form. Do not append
2133 anything if the instruction has only one possible size.
2135 * d30v-opc.c: Change mulx2h to require an even register.
2136 New form: SHORT_A2; a SHORT_A form that needs an even
2137 register as the first operand.
2139 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2140 instruction was not being disassembled if there were an odd
2141 number of instructions.
2143 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2145 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2147 * v850-dis.c (disassemble): Improved display of register lists.
2149 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2151 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2152 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2153 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2154 fandnot1s, fandnot2s.
2156 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2158 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2160 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2162 * cgen-asm.c (cgen_parse_address): New argument resultp.
2163 All callers updated.
2164 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2166 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2168 * mn10200-dis.c (disassemble): PC relative instructions are
2169 relative to the next instruction, not the current instruction.
2171 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2173 * v850-dis.c (disassemble): Only signed extend values that are not
2174 returned by extract functions.
2175 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2177 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2179 * v850-opc.c: Update comments. Remove use of
2180 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2182 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2184 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2186 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2188 * configure: Rebuilt with latest devo autoconf for NT support.
2190 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2192 * v850-dis.c (disassemble): Use curly brace syntax for register
2195 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2196 where r0 is being used as a destination register.
2198 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2200 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2202 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2204 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2206 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2208 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2209 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2212 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2214 * configure (cgen_files): Add support for v850e target.
2215 * configure.in (cgen_files): Add support for v850e target.
2217 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2219 * configure (cgen_files): Add support for v850ea target.
2220 * configure.in (cgen_files): Add support for v850ea target.
2222 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2224 * configure.in (bfd_arc_arch): Add.
2225 * configure: Rebuild.
2226 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2227 * Makefile.in: Rebuild.
2228 * arc-dis.c, arc-opc.c: New files.
2229 * disassemble.c (ARCH_all): Define ARCH_arc.
2230 (disassembler): Add ARC support.
2232 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2234 * v850-dis.c (disassemble): Add support for v850EA instructions.
2236 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2237 (v850_opcodes): Add v850EA instructions.
2239 * v850-dis.c (disassemble): Add support for v850E instructions.
2241 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2242 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2243 insert_spe, extract_spe): New Functions.
2244 (v850_opcodes): Add v850E instructions.
2246 * v850-opc.c: Reorganised and re-layed out to improve readability
2249 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2251 * configure: Rebuild with autoconf 2.12.1.
2253 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * aclocal.m4, configure: Rebuild with new automake patches.
2257 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2259 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2260 * acinclude.m4: Just include acinclude.m4 from BFD.
2261 * aclocal.m4, configure: Rebuild.
2263 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2265 * Makefile.am: New file, based on old Makefile.in.
2266 * acconfig.h: New file.
2267 * acinclude.m4: New file.
2268 * stamp-h.in: New file.
2269 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2270 Removed shared library handling; now handled by libtool. Replace
2271 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2272 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2273 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2274 handling in AC_OUTPUT.
2275 * dep-in.sed: Change .o to .lo.
2276 * Makefile.in: Now built with automake.
2277 * aclocal.m4: Now built with aclocal.
2278 * config.in, configure: Rebuild.
2280 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2282 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2284 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2286 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2288 * sparc-dis.c (sorted_opcodes): New static local.
2289 (struct opcode_hash): `opcode' is pointer to const element.
2290 (build_hash): First arg is now table of sorted pointers.
2291 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2292 (compare_opcodes): Update.
2294 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2296 * cgen-opc.c: #include <ctype.h>.
2297 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2298 Handle case insensitive hashing.
2299 (hash_keyword_value): Change type of `value' to unsigned int.
2301 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2303 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2304 precision FP, mark it as such. Likewise for double precision
2305 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2308 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2310 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2312 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2313 nesting depth when all the macros are expanded.
2315 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2317 * sparc-opc.c: The fcmp v9a instructions take an integer register
2318 as a destination, not a floating point register. From Christian
2319 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2321 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2323 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2324 syntax. From Roman Hodek
2325 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2327 * i386-dis.c (twobyte_has_modrm): Fix pand.
2329 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2331 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2333 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2335 * arm-dis.c: Add prototypes for arm_decode_shift and
2338 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2340 * mips-opc.c: Add r3900 insns.
2342 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2344 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2345 print delay slot instructions on the same line. When using a PC
2346 relative load, add a comment with the value being loaded if it can
2349 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2351 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2352 to pushS/popS for segment regs and byte constant so that
2353 pushw/popw printed when in 16 bit data mode.
2355 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2356 print cbtw, cwtd in 16 bit data mode.
2357 * i386-dis.c (putop): extra case W to support above.
2359 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2360 address size prefix in 16 bit address mode.
2362 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2364 * sh-dis.c: Reindent. Rename local variable fprintf to
2367 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2369 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2371 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2373 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2375 * mips16-opc.c (mip16_opcodes): same.
2377 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2379 * m68k-opc.c (moveb): Change $d to %d.
2381 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2383 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2384 (twobyte_has_modrm): Likewise.
2386 (OP_MMX, OP_EM, OP_MS): New static functions.
2388 * i386-dis.c: Revert patch of April 4. The output now matches
2391 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2393 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2396 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2398 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2400 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2402 * Makefile.in (install): Depend upon installdirs.
2403 (installdirs): New target.
2405 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2407 From Thomas Graichen <graichen@rzpd.de>:
2408 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2409 * configure: Rebuild.
2411 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2413 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2414 Delete string{,s}.h support.
2416 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2418 * cgen-asm.c (cgen_parse_operand_fn): New global.
2419 (cgen_parse_{{,un}signed_integer,address}): Update call to
2420 cgen_parse_operand_fn.
2421 (cgen_init_parse_operand): New function.
2422 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2423 from cgen_asm_init_parse.
2424 (m32r_cgen_assemble_insn): New operand `errmsg'.
2425 Delete call to as_bad, return error message to caller.
2426 (m32r_cgen_asm_hash_keywords): #if 0 out.
2428 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2430 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2432 [case 'J']: Fix typo in register name.
2434 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2436 * configure.in: Substitute SHLIB_LIBS.
2437 * configure: Rebuild.
2438 * Makefile.in (SHLIB_LIBS): New variable.
2439 ($(SHLIB)): Use $(SHLIB_LIBS).
2441 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2443 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2445 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2447 * disassemble.c (disassembler): Handle m32r.
2449 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2451 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2452 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2453 * Makefile.in (CFILES): Add them.
2454 (ALL_MACHINES): Add them.
2455 (dependencies): Regenerate.
2456 * configure.in (cgen_files): New variable.
2457 (bfd_m32r_arch): Add entry.
2458 * configure: Regenerate.
2460 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2462 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2463 * configure: Rebuild.
2465 * Makefile.in: Rebuild dependencies.
2467 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2469 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2472 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2474 * Branched binutils 2.8.
2476 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2478 * m10200-dis.c: Rename from mn10200-dis.c.
2479 * m10200-opc.c: Rename from mn10200-opc.c.
2480 * m10300-dis.c: Rename from mn10300-dis.c
2481 * m10300-opc.c: Rename from mn10300-opc.c.
2482 * Makefile.in: Update accordingly.
2484 * mips16-opc.c: Add mul and dmul macros.
2486 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2488 * makefile.vms: Update CFLAGS, add clean target.
2490 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2492 * mips-opc.c: Add "wait". From Ralf Baechle
2493 <ralf@gnu.ai.mit.edu>.
2495 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2496 * configure, config.in: Rebuild.
2497 * sysdep.h: Include <stdlib.h> if it exists.
2498 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2500 * Makefile.in: Rebuild dependencies.
2502 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2504 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2505 Andrew Bray <andy@madhouse.demon.co.uk>.
2507 * mips-opc.c: Add cast when setting mips_opcodes.
2509 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2511 * v850-dis.c (disassemble): Fix sign extension problem.
2512 * v850-opc.c (extract_d*): Fix sign extension problems to make
2513 disassembly calculate branch offsets correctly.
2515 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2517 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2519 * mips-opc.c: Add dctr and dctw.
2521 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2523 * d30v-dis.c (print_insn): Change the way signed constants
2526 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2528 * Makefile.in (BFD_H): New variable.
2529 (HFILES): New variable.
2530 (CFILES): Add all C files.
2531 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2532 Delete old dependencies, and build new ones.
2533 * dep-in.sed: New file.
2535 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2537 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2539 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2541 * mn10200-opc.c: Change "trap" to "syscall".
2542 * mn10300-opc.c: Add new "syscall" instruction.
2544 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2546 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2547 mulul insns on the coldfire.
2549 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2551 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2552 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2553 (print_insn_little_arm): Likewise.
2555 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2557 Based on patches from H.J. Lu <hjl@lucon.org>:
2558 * i386-dis.c (fetch_data): Add prototype.
2559 * m68k-dis.c (fetch_data): Add prototype.
2560 (dummy_print_address): Add prototype. Make static.
2561 * ppc-opc.c (valid_bo): Add prototype.
2562 * sparc-dis.c (build_hash_table): Add prototype.
2563 (is_delayed_branch, compute_arch_mask): Add prototypes.
2564 (print_insn_sparc): Make several local variables const.
2565 (compare_opcodes): Change arguments to const PTR. Add prototype.
2566 * sparc-opc.c (arg): Change name field to be const.
2567 (lookup_name, lookup_value): Add prototypes. Change table and
2568 name parameters to be const.
2569 (sparc_encode_asi): Change name parameter to be const.
2570 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2571 (sparc_encode_sparclet_cpreg): Likewise.
2572 (sparc_decode_asi): Change return type to be const.
2573 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2574 (sparc_decode_sparclet_cpreg): Likewise.
2576 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2578 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2579 Solaris doesn't like the combined options, and the -f is
2581 (stamp-tshlink, install): Likewise.
2583 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2585 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2588 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2590 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2592 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2594 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2597 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2599 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2601 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2603 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2605 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2607 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2609 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2611 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2612 floatformat_to_double to make portable.
2613 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2616 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2618 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2619 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2621 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2623 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2624 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2626 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2628 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2629 (OFF_SL_BR_SCALED): ... to this, and added the flag
2630 TIC80_OPERAND_BASEREL to the flags word.
2631 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2634 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2636 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2637 Change mips_opcodes from const array to a pointer,
2638 and change bfd_mips_num_opcodes from const int to int,
2639 so that we can increase the size of the mips opcodes table
2642 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2644 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2645 store BITNUM values in the table in one's complement form
2646 to match behavior when assembler is given a raw numeric
2647 value for a BITNUM operand.
2648 * tic80-dis.c (print_operand_bitnum): Ditto.
2650 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2652 * d30v-opc.c: Removed references to FLAG_X.
2654 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2656 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2658 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2660 * Makefile.in: Added d30v object files.
2661 * configure: (bfd_d30v_arch) Rebuilt.
2662 * configure.in: (bfd_d30v_arch) Added new case.
2663 * d30v-dis.c: New file.
2664 * d30v-opc.c: New file.
2665 * disassemble.c (disassembler) Add entry for d30v.
2667 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2669 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2670 representations for the floating point BITNUM values.
2672 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2674 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2675 in the table in one's complement form, as they appear in the
2677 (tic80_symbol_to_value): Use macros to access predefined
2679 (tic80_value_to_symbol): Ditto.
2680 (tic80_next_predefined_symbol): New function.
2681 * tic80-dis.c (print_operand_bitnum): Remove code that did
2682 one's complement for BITNUM values.
2684 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2686 * makefile.vms: Remove 8 bit characters. Update to latest
2689 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2691 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2693 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2695 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2696 (IMM24_PCREL): Likewise.
2698 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2700 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2701 address for an extended PC relative instruction that is not a
2704 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2706 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2709 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2711 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2712 (tic80_opcodes): Sort entries so that long immediate forms
2713 come after short immediate forms, making it easier for
2714 assembler to select the right one for a given operand.
2716 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2718 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2720 (print_insn_mips16): Likewise.
2722 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2724 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2725 a symbol class that restricts translation to just that
2726 class (general register, condition code, etc).
2728 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2730 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2731 and REG_DEST_E for register operands that have to be
2732 an even numbered register. Add REG_FPA for operands that
2733 are one of the floating point accumulator registers.
2734 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2735 (tic80_opcodes): Change entries that need even numbered
2736 register operands to use the new operand table entries.
2737 Add "or" entries that are identical to "or.tt" entries.
2739 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2741 * mips16-opc.c: Add new cases of exit instruction for
2743 * mips-dis.c (print_mips16_insn_arg): Display floating point
2744 registers in operands of exit instruction. Print `$' before
2745 register names in operands of entry and exit instructions.
2747 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2749 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2750 pairs for all predefined symbols recognized by the assembler.
2751 Also used by the disassembling routines.
2752 (tic80_symbol_to_value): New function.
2753 (tic80_value_to_symbol): New function.
2754 * tic80-dis.c (print_operand_control_register,
2755 print_operand_condition_code, print_operand_bitnum):
2756 Remove private tables and use tic80_value_to_symbol function.
2758 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2760 * d10v-dis.c (print_operand): Change address printing
2761 to correctly handle PC wrapping. Fixes PR11490.
2763 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2765 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2768 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2770 * mips-dis.c (print_insn_mips16): Set insn_info information.
2771 (print_mips16_insn_arg): Likewise.
2773 * mips-dis.c (print_insn_mips16): Better handling of an extend
2774 opcode followed by an instruction which can not be extended.
2776 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2778 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2779 coldfire moveb instruction to not allow an address register as
2780 destination. Although the documentation does not indicate that
2781 this is invalid, experiments uncovered unexpected behavior.
2782 Added a comment explaining the situation. Thanks to Andreas
2783 Schwab for pointing this out to me.
2785 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2787 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2788 entries are presorted so that entries with the same mnemonic are
2789 adjacent to each other in the table. Sort the entries for each
2790 instruction so that this is true.
2792 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2794 * m68k-dis.c: Include <libiberty.h>.
2795 (print_insn_m68k): Sort the opcode table on the most significant
2796 nibble of the opcode.
2798 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2800 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2801 "vsub", "vst", "xnor", and "xor" instructions.
2802 (V_a1): Renamed from V_a, msb of accumulator reg number.
2803 (V_a0): Add macro, lsb of accumulator reg number.
2805 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2807 * tic80-dis.c (print_insn_tic80): Broke excessively long
2808 function up into several smaller ones and arranged for
2809 the instruction printing function to be callable recursively
2810 to print vector instructions that have both a load and a
2811 math instruction packed into a single opcode.
2812 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2813 to explain why it comes after the other vector opcodes.
2815 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2817 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2818 move insns to handle immediate operands.
2820 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2822 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2823 fix operand mask in the "moveml" entries for the coldfire.
2825 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2827 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2828 New macros for building vector instruction opcodes.
2829 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2830 FMT_LI, which were unused. The field is now a flags field.
2831 Remove some opcodes that are possible, but illegal, such
2832 as long immediate instructions with doubles for immediate
2833 values. Add "vadd" and "vld" instructions.
2835 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2837 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2838 the order more logical. Move the shift alias instructions ("rotl",
2839 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2840 interspersed with the regular sr.x and sl.x instructions. Add
2841 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2842 "sub", "subu", "swcr", and "trap".
2844 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2846 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2847 (OFF_SL_PC): Renamed from OFF_SL.
2848 (OFF_SS_BR): New operand type for base relative operand.
2849 (OFF_SL_BR): New operand type for base relative operand.
2850 (REG_BASE): New operand type for base register operand.
2851 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2852 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2853 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2855 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2856 10 char field, padded with spaces on rhs, rather than a string
2857 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2858 than old TIC80_OPERAND_RELATIVE. Add support for new
2859 TIC80_OPERAND_BASEREL flag bit.
2861 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2863 * tic80-dis.c (print_insn_tic80): Print floating point operands
2865 * tic80-opc.c (SPFI): Add single precision floating point
2866 immediate operand type.
2867 (ROTATE): Add rotate operand type for shifts.
2868 (ENDMASK): Add for shifts.
2869 (n): Macro for the 'n' bit.
2870 (i): Macro for the 'i' bit.
2871 (PD): Macro for the 'PD' field.
2872 (P2): Macro for the 'P2' field.
2873 (P1): Macro for the 'P1' field.
2874 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2877 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2879 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2880 adding in current address for pc-relative operands.
2882 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2884 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2885 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2886 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2887 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2888 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2889 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2890 (REG_SCALED, LSI_SCALED): New operand types.
2891 (E): New macro for 'E' bit at bit 27.
2892 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2893 opcodes, including the various size flavors (b,h,w,d) for
2894 the direct load and store instructions.
2896 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2898 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2900 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2901 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2902 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2903 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2904 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2905 masks with "MASK_* & ~M_*" to get the M bit reset.
2906 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2908 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2910 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2911 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2912 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2914 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2915 CC, SICR, and LICR table entries.
2916 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2917 "bcnd", and "brcr" opcodes.
2919 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2921 * ppc-opc.c (powerpc_operands): Make comment match the
2922 actual fields (no shift field).
2923 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2924 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2925 partial implementation, work in progress.
2926 * tic80-opc.c (tic80_operands): Begin construction operands table.
2927 (tic80_opcodes): Continue populating opcodes table and start
2928 filling in the operand indices.
2929 (tic80_num_opcodes): Add this.
2931 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2933 * m68k-opc.c: Add #B case for moveq.
2935 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2937 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2938 before they are used.
2940 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2942 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2943 for "breakpoint" instruction.
2945 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2947 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2948 (dep): Use ALL_CFLAGS rather than CFLAGS.
2950 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2952 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2955 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2957 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2958 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2960 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2962 * mips16-opc.c: Add "abs".
2964 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2966 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2967 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2968 (disassembler): Add bfd_arch_tic80 support to set disassemble
2969 to print_insn_tic80.
2970 * tic80-dis.c (print_insn_tic80): Add stub.
2972 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2974 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2975 * configure: Regenerate with autoconf.
2976 * tic80-dis.c: Add file.
2977 * tic80-opc.c: Add file.
2979 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2981 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2983 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2985 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2986 (mn10200_opcodes): Use it for some logicals and btst insns.
2987 Add "break" and "trap" instructions.
2989 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2991 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2993 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2995 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2996 relative load or add now depends upon whether the instruction is
2999 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3001 * mn10200-dis.c: Finish writing disassembler.
3002 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3003 Fix mask for "jmp (an)".
3005 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3006 handle endianness issues for mn10300.
3008 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3010 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3012 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3013 instruction. Fix opcode field for "movb (imm24),dn".
3015 * mn10200-opc.c (mn10200_operands): Fix insertion position
3018 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3020 * mn10200-opc.c: Create mn10200 opcode table.
3021 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3022 but moving along nicely.
3024 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3026 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3028 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3030 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3031 specifiers for fmovem* instructions.
3033 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3035 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3037 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3039 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3042 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3044 * mn10300-opc.c: Add some comments explaining the various
3047 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3049 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3051 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3054 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3055 operand specifiers in fmovm* instructions.
3057 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3059 * ppc-opc.c (insert_li): Give an error if the offset has the two
3060 least significant bits set.
3062 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3064 * mips-dis.c (print_insn_mips16): Separate the instruction from
3065 the arguments with a tab, not a space.
3067 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3069 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3072 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3075 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3077 * configure: Rebuild with autoconf 2.12.
3079 Add support for mips16 (16 bit MIPS implementation):
3080 * mips16-opc.c: New file.
3081 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3082 (mips16_reg_names): New static array.
3083 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3084 after seeing a 16 bit symbol.
3085 (print_insn_little_mips): Likewise.
3086 (print_insn_mips16): New static function.
3087 (print_mips16_insn_arg): New static function.
3088 * mips-opc.c: Add jalx instruction.
3089 * Makefile.in (mips16-opc.o): New target.
3090 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3091 * configure: Rebuild.
3093 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3095 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3096 operand specifiers in *save, *restore and movem* instructions.
3098 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3101 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3102 register operands for immediate arithmetic, not, neg, negx, and
3103 set according to condition instructions.
3105 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3106 specifier of the effective-address operand in immediate forms of
3107 arithmetic instructions. The specifier for the immediate operand
3108 notes how and where the constant will be stored.
3110 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3112 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3115 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3118 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3120 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3122 * mn10300-dis.c (disassemble): Handle register lists.
3124 * mn10300-opc.c: Fix handling of register list operand for
3125 "call", "ret", and "rets" instructions.
3127 * mn10300-dis.c (disassemble): Print PC-relative and memory
3128 addresses symbolically if possible.
3129 * mn10300-opc.c: Distinguish between absolute memory addresses,
3130 pc-relative offsets & random immediates.
3132 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3134 (disassemble): Handle SPLIT and EXTENDED operands.
3136 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3138 * mn10300-dis.c: Rough cut at printing some operands.
3140 * mn10300-dis.c: Start working on disassembler support.
3141 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3143 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3145 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3147 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3149 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3151 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3153 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3154 register argument is calls and jmp instructions.
3156 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3158 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3159 getx operand. Fix opcode for mulqu imm,dn.
3161 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3163 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3164 in MN10300_OPERAND_SPLIT operands for how many bits
3165 appear in the basic insn word. Add IMM32_HIGH24,
3166 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3167 (mn10300_opcodes): Use new operands as needed.
3169 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3170 for bset, bclr, btst instructions.
3171 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3173 * mn10300-opc.c (mn10300_operands): Remove many redundant
3174 operands. Update opcode table as appropriate.
3175 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3176 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3178 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3180 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3181 operands (for indexed load/stores). Fix bitpos for DI
3182 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3183 few instructions that insert immediates/displacements in the
3184 middle of the instruction. Add IMM8E for 8 bit immediate in
3185 the extended part of an instruction.
3186 (mn10300_operands): Use new opcodes as appropriate.
3188 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3190 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3191 sequential so the assembler never parallelizes it with
3194 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3196 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3197 a data/address register that appears in register field 0
3198 and register field 1.
3199 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3201 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3203 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3204 standard disassembly.
3206 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3207 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3208 Recategorize PALcode instructions.
3210 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3212 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3214 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3216 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3217 there are no operand types.
3219 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3221 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3223 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3225 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3227 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3229 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3231 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3232 and sst.w instructions.
3234 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3237 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3239 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3242 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3244 * ppc-opc.c (PPCPWR2): Define.
3245 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3248 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3250 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3251 field for movhu instruction.
3253 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3254 cast value to "long" not "signed long" to keep hpux10
3257 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3259 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3262 * mn10300-opc.c (FMT*): Remove definitions.
3264 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3265 for shift-by-register opcodes.
3267 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3268 into [AD][MN][01] for encoding the position of the register
3271 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3273 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3274 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3276 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3278 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3279 Fix various typos. Add "PAREN" operand.
3280 (MEM, MEM2): Define.
3281 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3282 operands. Fix several typos.
3284 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3287 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3289 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3290 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3292 (mn10300_opcodes): Break opcode format out into its own field.
3293 Update many operand fields to deal with signed vs unsigned
3294 issues. Fix one or two typos in the "mov" instruction
3295 opcode, mask and/or operand fields.
3297 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3299 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3300 m68851 wasn't reset.
3302 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3304 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3305 all opcodes. Very rough cut at operands for all opcodes.
3307 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3310 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3312 * mn10200-opc.c, mn10300-opc.c: New files.
3313 * mn10200-dis.c, mn10300-dis.c: New files.
3314 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3315 * disassemble.c: Break mn10x00 support into 10200 and 10300
3317 * configure.in: Likewise.
3318 * configure: Rebuilt.
3320 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3322 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3324 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3326 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3328 * disassemble (ARCH_mn10x00): Define.
3329 (disassembler): Handle bfd_arch_mn10x00.
3330 * configure.in: Recognize bfd_mn10x00_arch.
3331 * configure: Rebuilt.
3333 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3335 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3336 accordingly. Don't declare functions using op_rtn.
3338 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3340 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3341 params to be more standard.
3342 * (disassemble): Print absolute addresses and symbolic names for
3343 branch and jump targets.
3344 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3346 * (v850_opcodes): Add breakpoint insn.
3348 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3350 * m68k-opc.c: Move the fmovemx data register cases before the
3351 other cases, so that they get recognized before the data register
3352 does gets treated as a degenerate register list.
3354 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3356 * mips-opc.c: Add a case for "div" and "divu" with two registers
3357 and a destination of $0.
3359 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3361 * mips-dis.c (print_insn_arg): Add prototype.
3362 (_print_insn_mips): Ditto.
3364 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3366 * mips-dis.c (print_insn_arg): Print condition code registers as
3369 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3371 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3373 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3375 * v850-dis.c (disassemble): Make static. Provide prototype.
3377 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3379 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3382 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3384 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3385 ']' characters into the output stream.
3386 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3387 Add "memop" field to all opcodes (for the disassembler).
3388 Reorder opcodes so that "nop" comes before "mov" and "jr"
3389 comes before "jarl".
3391 * v850-dis.c (print_insn_v850): Fix typo in last change.
3393 * v850-dis.c (print_insn_v850): Properly handle disassembling
3394 a two byte insn at the end of a memory region when the memory
3395 region's size is only two byte aligned.
3397 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3399 * v850-dis.c (v850_reg_names): Define.
3400 (v850_sreg_names, v850_cc_names): Likewise.
3401 (disassemble): Very rough cut at printing operands (unformatted).
3403 * v850-opc.c (BOP_MASK): Fix.
3404 (v850_opcodes): Fix mask for jarl and jr.
3406 * v850-dis.c: New file. Skeleton for disassembler support.
3407 * Makefile.in Remove v850 references, they're not needed here.
3408 * configure.in: Add v850-dis.o when building v850 toolchains.
3409 * configure: Rebuilt.
3410 * disassemble.c (disassembler): Call v850 disassembler.
3412 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3413 (insert_d8_6, extract_d8_6): New functions.
3414 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3415 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3417 (IF4A, IF4B): Use "D7" instead of "D7S".
3418 (IF4C, IF4D): Use "D8_7" instead of "D8".
3419 (IF4E, IF4F): New. Use "D8_6".
3420 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3421 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3423 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3424 (v850_operands): Change D16 to D16_15, use special insert/extract
3425 routines. New new D16 that uses the generic insert/extract code.
3426 (IF7A, IF7B): Use D16_15.
3427 (IF7C, IF7D): New. Use D16.
3428 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3430 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3431 message. Issue an error if the branch offset is odd.
3433 * v850-opc.c: Add notes about needing special insert/extract
3434 for all the load/store insns, except "ld.b" and "st.b".
3436 * v850-opc.c (insert_d22, extract_d22): New functions.
3437 (v850_operands): Use insert_d22 and extract_d22 for
3439 (insert_d9): Fix range check.
3441 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3443 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3444 and set bits field to D9 and D22 operands.
3446 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3448 * v850-opc.c (v850_operands): Define SR2 operand.
3449 (v850_opcodes): "ldsr" uses R1,SR2.
3451 * v850-opc.c (v850_opcodes): Fix opcode specs for
3452 sld.w, sst.b, sst.h, sst.w, and nop.
3454 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3456 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3457 end of the opcode table.
3459 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3461 * d10v-opc.c (pre_defined_registers): Added register pairs,
3462 "r0-r1", "r2-r3", etc.
3464 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3466 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3467 Create I16U for an unsigned 16bit mmediate operand.
3468 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3470 * v850-opc.c (v850_operands): Define EP operand.
3471 (IF4A, IF4B, IF4C, IF4D): Use EP.
3473 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3474 with immediate operand, "movhi". Tweak "ldsr".
3476 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3477 correct. Get sld.[bhw] and sst.[bhw] closer.
3479 * v850-opc.c (v850_operands): "not" is a two byte insn
3481 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3483 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3485 * v850-opc.c (two): Get order of words correct.
3487 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3489 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3490 register source and destination operands.
3491 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3493 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3494 same thinko in "trap" opcode.
3496 * v850-opc.c (v850_opcodes): Add initializer for size field
3499 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3500 Add D8 for 8-bit unsigned field in short load/store insns.
3501 (IF4A, IF4D): These both need two registers.
3502 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3503 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3504 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3505 for "ldsr" and "stsr".
3506 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3509 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3510 short store word (sst.w).
3512 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3514 * v850-opc.c (v850_operands): Added insert and extract fields,
3515 pointers to functions that handle unusual operand encodings.
3517 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3519 * v850-opc.c (v850_opcodes): Enable "trap".
3521 * v850-opc.c (v850_opcodes): Fix order of displacement
3522 and register for "set1", "clr1", "not1", and "tst1".
3524 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3526 * v850-opc.c (v850_operands): Add "B3" support.
3527 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3530 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3532 * v850-opc.c: Close unterminated comment.
3534 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3536 * v850-opc.c (v850_operands): Add flags field.
3537 (v850_opcodes): add move opcodes.
3539 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3541 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3542 * configure: (bfd_v850v_arch) Add new case.
3543 * configure.in: (bfd_v850_arch) Add new case.
3544 * v850-opc.c: New file.
3546 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3548 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3550 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3552 * d10v-opc.c: Add additional information to the opcode
3553 table to help determinine which instructions can be done
3556 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3558 * mpw-make.sed: Update editing of include pathnames to be
3561 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3563 * arm-opc.h: Added "bx" instruction definition.
3565 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3567 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3569 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3571 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3573 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3575 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3577 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3579 * makefile.vms: Update for alpha-opc changes.
3581 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3583 * i386-dis.c (print_insn_i386): Actually return the correct value.
3584 (ONE, OP_ONE): #ifdef out; not used.
3586 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3588 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3589 Changed subi operand type to treat 0 as 16.
3591 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3593 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3596 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3598 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3599 memory transfer instructions. Add new format string entries %h and %s.
3600 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3603 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3605 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3606 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3608 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3610 * alpha-dis.c (print_insn_alpha_osf): Remove.
3611 (print_insn_alpha_vms): Remove.
3612 (print_insn_alpha): Make globally visible. Chose the register
3613 names based on info->flavour.
3614 * disassemble.c: Always return print_insn_alpha for the alpha.
3616 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3618 * d10v-dis.c (dis_long): Handle unknown opcodes.
3620 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3622 * d10v-opc.c: Changes to support signed and unsigned numbers.
3623 All instructions with the same name that have long and short forms
3624 now end in ".l" or ".s". Divs added.
3625 * d10v-dis.c: Changes to support signed and unsigned numbers.
3627 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3629 * d10v-dis.c: Change all functions to use info->print_address_func.
3631 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3633 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3634 move ccr/sr insns more strict so that the disassembler only
3635 selects them when the addressing mode is data register.
3637 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3638 * d10v-opc.c (pre_defined_registers): Declare.
3639 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3640 to pick a better name for the registers.
3642 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3644 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3645 operands for fexpand and fpmerge. From Christian Kuehnke
3646 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3648 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3650 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3651 print routine. Take new regnames and cpumask arguments.
3652 Kill the environment variable nonsense.
3653 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3654 (print_insn_alpha_vms): New function. Do VMS style regnames.
3655 * disassemble.c (disassembler): Test bfd flavour to pick
3656 between OSF and VMS routines. Default to OSF.
3658 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3660 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3661 * configure: Rebuild.
3662 * Makefile.in (install): Use @INSTALL_SHLIB@.
3664 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3666 * configure: (bfd_d10v_arch) Add new case.
3667 * configure.in: (bfd_d10v_arch) Add new case.
3668 * d10v-dis.c: New file.
3669 * d10v-opc.c: New file.
3670 * disassemble.c (disassembler) Add entry for d10v.
3672 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3674 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3675 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3677 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3679 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3680 distinguish between variants of the instruction set.
3681 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3682 distinguish between variants of the instruction set.
3684 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3686 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3687 the 8086 instruction set.
3688 * i386-dis.c: General cleanups. Make most things static. Add
3689 prototypes. Get rid of static variables aflags and dflags. Pass
3690 them as args (to almost everything).
3692 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3694 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3696 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3698 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3699 if the next arg is marked with SRC_IN_DST. Gross.
3701 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3702 we're looking for and find EXR.
3704 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3705 if we're looking for KBIT and we don't find it.
3707 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3710 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3711 3bit immediate operands.
3713 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3715 * Released binutils 2.7.
3717 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3718 <kkaempf@progis.ac-net.de>.
3720 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3722 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3724 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3726 * sparc-dis.c (print_insn_sparclite): New routine to print
3727 sparclite instructions.
3729 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3731 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3733 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3735 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3736 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3737 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3739 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3741 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3742 Use autoconf-set values.
3743 (docdir, oldincludedir): Removed.
3744 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3746 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3748 * alpha-opc.c: New file.
3749 * alpha-opc.h: Remove.
3750 * alpha-dis.c: Complete rewrite to use new opcode table.
3751 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3752 * configure: Rebuild with autoconf 2.10.
3753 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3754 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3756 (alpha-opc.o): New target.
3758 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3760 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3761 Set imm_added_to_rs1 even if the source and destination register
3764 * sparc-opc.c: Add some two operand forms of the wr instruction.
3766 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3768 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3771 * disassemble.c (disassembler): Handle H8/S.
3772 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3774 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3776 * sparc-opc.c: Add beq/teq as aliases for be/te.
3778 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3779 <sergei@msil.sps.mot.com>.
3781 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3783 * makefile.vms: New file.
3785 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3787 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3789 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3792 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3794 * i386-dis.c (OP_OFF): Call append_prefix.
3796 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3798 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3799 unsigned long to silence a warning from the Solaris PowerPC
3802 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3804 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3806 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3808 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3810 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3811 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3812 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3813 cpush, cpusha, cpull sparclet insns.
3815 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3817 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3819 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3821 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3822 Set F_FLOAT on other floating point instructions.
3824 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3826 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3828 (powerpc_opcodes): Add 860/821 specific SPRs.
3830 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3832 * configure.in: Permit --enable-shared to specify a list of
3833 directories. Set and substitute BFD_PICLIST.
3834 * configure: Rebuild.
3835 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3836 uses. Set to @BFD_PICLIST@.
3838 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3840 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3841 not "abs", which may be needed for the absolute in something
3842 like btst #0,@10:8. Print L_3 immediates separately from other
3843 immediates. Change ABSMOV reference to ABS8MEM.
3845 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3847 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3848 (current_arch_mask): New static global.
3849 (compute_arch_mask): New static function.
3850 (print_insn_sparc): Delete sparc_v9_p. New static local
3851 current_mach. Resort opcode table if current_mach changes.
3852 Generalize "insn not supported" test.
3853 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3854 Delete test for v9/!v9.
3855 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3857 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3858 (brfcx): Renamed to FBRX.
3859 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3860 coprocessor mnemonics are not supported on the sparclet).
3861 (condf): Renamed to CONDF.
3862 (SLCBCC2): Delete F_ALIAS flag.
3864 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3866 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3867 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3869 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3871 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3872 that the shared library version number is set correctly.
3874 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3876 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3877 Miles Bader <miles@gnu.ai.mit.edu>.
3878 * configure: Rebuild.
3880 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3882 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3885 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3887 * configure: Rebuild with autoconf 2.8.
3889 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3891 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3892 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3894 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3896 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3897 since they appear as targets in Makefile.in.
3898 * configure: Rebuild.
3900 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3902 * mpw-make.sed: Edit out shared library support bits.
3904 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3906 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3907 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3908 (sparc_opcodes): Add sparclet insns.
3909 (sparclet_cpreg_table): New static local.
3910 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3911 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3913 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3915 * i386-dis.c (index16): New static variable.
3916 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3918 (OP_indirE): Return result of OP_E.
3919 (OP_E): Check for 16 bit addressing mode, and disassemble
3920 correctly. Optimised 32 bit case a little. Don't print
3921 "(base,index,scale)" when sib specifies only an offset.
3923 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3925 * configure.in: Set and substitute SHLIB_DEP.
3926 * configure: Rebuild.
3927 * Makefile.in (SHLIB_DEP): New variable.
3928 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3929 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3930 COMMON_SHLIB, add them to piclist with appropriate modifications.
3931 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3932 here: just use piclist.
3934 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3936 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3937 (print_insn_sparc): Rewrite v9/not-v9 tests.
3938 (compare_opcodes): Likewise.
3939 * sparc-opc.c (MASK_<ARCH>): Define.
3940 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3941 (sparclet,v6notv9): Define.
3942 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3943 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3945 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3947 * configure.in: Call AC_PROG_CC before configure.host.
3948 * configure: Rebuild.
3950 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3952 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3954 * i386-dis.c (onebyte_has_modrm): New static array.
3955 (twobyte_has_modrm): New static array.
3956 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3958 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3960 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3963 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3965 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3968 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3970 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3971 m68010up, not just m68020up | cpu32.
3973 * Makefile.in (SONAME): New variable.
3974 ($(SHLINK)): Make a link to the transformed name, as well.
3975 (stamp-tshlink): New target.
3976 (install): Skip stamp-tshlink during install.
3978 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3980 * configure.in: Call AC_ARG_PROGRAM.
3981 * configure: Rebuild.
3982 * Makefile.in (program_transform_name): New variable.
3983 (install): Transform library name before installing it.
3985 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3987 * i960-dis.c (mem): Add HX dcinva instruction.
3989 Support for building as a shared library, based on patches from
3990 Alan Modra <alan@spri.levels.unisa.edu.au>:
3991 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3992 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3993 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3994 * configure: Rebuild.
3995 * Makefile.in (ALLLIBS): New variable.
3996 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3997 (COMMON_SHLIB, SHLINK): New variables.
3998 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3999 (STAGESTUFF): Remove variable.
4000 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4001 (stamp-piclist, piclist): New targets.
4002 ($(SHLIB), $(SHLINK)): New targets.
4003 ($(OFILES)): Depend upon stamp-picdir.
4004 (disassemble.o): Build twice if PICFLAG is set.
4005 (MOSTLYCLEAN): Add pic/*.o.
4006 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4007 (distclean): Remove pic and stamp-picdir.
4008 (install): Install shared libraries.
4009 (stamp-picdir): New target.
4011 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4013 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4014 Print unknown instruction as "unknown", rather than in hex.
4016 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4018 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4020 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4022 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4024 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4026 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4027 when necessary. From Ulrich Drepper
4028 <drepper@myware.rz.uni-karlsruhe.de>.
4030 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4032 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4033 sparc_num_opcodes. Update architecture enum values.
4034 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4035 (sparc_opcode_lookup_arch): New function.
4036 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4037 (sparc_opcodes): Add v9a shutdown insn.
4039 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4041 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4042 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4044 (print_insn_sparc64): Deleted.
4045 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4048 * sparc-opc.c (architecture_pname): Add v9a.
4050 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4052 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4053 incorrectly defined as 0x16 when it should be 0x15.
4054 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4055 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4056 excb (exception barrier) which is defined in the Alpha
4057 Architecture Handbook version 2.
4058 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4059 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4060 disassembled as or, for example.
4062 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4064 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4065 (_print_insn_mips): Change i from int to unsigned int.
4067 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4069 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4070 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4072 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4074 * i386-dis.c: Added Pentium Pro instructions.
4076 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4078 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4081 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4083 * sh-opc.h (sh_nibble_type): Added REG_B.
4084 (sh_arg_type): Added A_REG_B.
4085 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4087 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4089 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4091 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4093 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4095 * Makefile.in (distclean): Remove stamp-h. From Ronald
4096 F. Guilmette <rfg@monkeys.com>.
4098 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4100 From David Mosberger-Tang <davidm@azstarnet.com>:
4101 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4104 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4106 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4107 (sh_table): Added many SH3 opcodes.
4108 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4110 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4112 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4113 (subco,subco.): Mark this PPC, not PPCCOM.
4115 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4117 * configure: Rebuild with autoconf 2.7.
4119 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4121 * configure: Rebuild with autoconf 2.6.
4123 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4125 * configure.in: Sort list of architectures. Accept but do nothing
4126 for alliant, convex, pyramid, romp, and tahoe.
4128 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4130 * a29k-dis.c (print_special): Change num to unsigned int.
4132 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4134 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4137 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4139 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4140 * configure: Rebuilt.
4142 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4144 * configure.in: Add case for bfd_i860_arch.
4145 * configure: Rebuild.
4147 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4149 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4150 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4151 (NEXTDOUBLE): Likewise.
4152 (print_insn_m68k): Don't match fmoveml if there is more than one
4153 register in the list.
4154 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4156 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4158 * m68k-opc.c: Use #W rather than #w.
4159 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4161 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4163 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4164 and likewise for all the dbxx opcodes.
4166 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4168 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4170 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4172 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4173 the VR4100 specific instructions to the mips_opcodes structure.
4175 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4177 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4178 ugly Metrowerks bug in CW6, is fixed in CW7.
4180 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4182 * ppc-opc.c (whole file): Add flags for common/any support.
4184 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4186 * Makefile.in (BISON): Remove macro.
4187 (FLAGS_TO_PASS): Remove BISON.
4189 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4191 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4193 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4194 instructions that take no args by looking at the match mask.
4195 (print_insn_arg): Always print "%" before register names.
4196 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4197 [case '_']: Don't print "@#" before address.
4198 [case 'J']: Use "%s" as format string, not register name.
4199 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4201 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4203 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4206 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4208 From David Mosberger-Tang <davidm@azstarnet.com>
4210 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4211 (alpha_insn_set): added definitions for VAX floating point
4212 instructions (Unix compilers don't generate these, but handcoded
4213 assembly might still use them).
4215 * alpha-dis.c (print_insn_alpha): added support for disassembling
4216 the miscellaneous instructions in the Alpha instruction set.
4218 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4220 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4221 no longer create sysdep.h, sed ppc-opc.c to work around a
4222 serious Metrowerks C bug.
4223 * mpw-make.in: Remove.
4224 * mpw-make.sed: New file, used by mpw-configure to edit
4225 Makefile.in into an MPW makefile.
4227 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4229 * Makefile.in (maintainer-clean): New synonym for realclean.
4231 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4233 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4234 which use '0', '1', and '2' instead. Specify the proper size for
4235 a pmove immediate operand. Correct the pmovefd patterns to be
4236 moves to a register, not from a register.
4237 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4239 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4241 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4242 %psr, %wim, %tbr as F_NOTV9.
4244 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4246 * Makefile.in (Makefile): Just rebuild Makefile when running
4248 (config.h, stamp-h): New targets.
4249 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4250 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4251 rebuilding config.h.
4252 * configure: Rebuild.
4254 * mips-opc.c: Change unaligned loads and stores with "t,A"
4255 operands to use "t,A(b)".
4257 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4259 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4261 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4263 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4264 until 3 instead of until 2.
4266 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4268 * Makefile.in (ALL_CFLAGS): Define.
4269 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4270 (MOSTLYCLEAN): Add config.log.
4271 (distclean): Don't remove config.log.
4272 * configure.in: Substitute HDEFINES.
4273 * configure: Rebuild.
4275 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4277 * sh-opc.h (sh_arg_type): Add F_FR0.
4278 (sh_table, case fmac): Add F_FR0 as first argument.
4280 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4282 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4284 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4286 * sparc-dis.c: Remove all references to NO_V9.
4288 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4290 * aclocal.m4: Just include ../bfd/aclocal.m4.
4291 * configure: Rebuild.
4293 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4295 * sparc-dis.c (X_DISP19): Define.
4296 (print_insn, case 'G'): Use it.
4297 (print_insn, case 'L'): Sign extend displacement.
4299 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4301 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4302 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4303 host_makefile_frag or frags.
4304 * aclocal.m4: New file.
4305 * configure: Rebuild.
4306 * Makefile.in (INSTALL): Set to @INSTALL@.
4307 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4308 (INSTALL_DATA): Set to @INSTALL_DATA@.
4310 (AR_FLAGS): Set to rc rather than qc.
4311 (CC): Define as @CC@.
4312 (CFLAGS): Set to @CFLAGS@.
4313 (@host_makefile_frag@): Remove.
4314 (config.status): Remove dependency upon @frags@.
4316 * configure.in: ../bfd/config.bfd now just sets shell variables.
4317 Use them rather than looking through target Makefile fragments.
4318 * configure: Rebuild.
4320 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4322 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4324 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4326 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4327 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4330 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4331 (lookup_{name,value}): New functions.
4332 (prefetch_table): New static local.
4333 (sparc_{encode,decode}_prefetch): New functions.
4334 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4336 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4338 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4341 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4343 * sh-dis.c: Correct comment on first line of file.
4345 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4347 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4349 * sparc-opc.c (asi, membar): New static locals.
4350 (sparc_{encode,decode}_{asi,membar}): New functions.
4351 (sparc_opcodes, membar insn): Fix.
4352 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4353 Support decoding of membar masks.
4356 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4358 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4360 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4362 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4363 and likewise for the other branches. Add bhs as an alias for bcc,
4364 and likewise for the size variants. Add dbhs as an alias for
4367 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4369 * sh-opc.h (FP sts instructions): Update to match reality.
4371 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4373 * m68k-dis.c: (fpcr_names): Add % before all register names.
4374 (reg_names): Likewise.
4375 (print_insn_arg): Don't explicitly print % before register names.
4376 Add % before register names in static array names. In case 'r',
4377 print data registers as `@(Dn)', not `Dn@'. When printing a
4378 memory address, don't print @# before it.
4379 (print_indexed): Change base_disp and outer_disp from int to
4380 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4381 syntax. Sign extend 8 byte displacement correctly.
4382 (print_base): Print using MIT syntax. Print zpc when appropriate.
4383 Change parameter disp from int to bfd_vma.
4385 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4388 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4390 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4391 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4392 * sh-opc.h (sh_arg_type): Add new operand types.
4393 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4395 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4397 * Makefile.in (distclean): Remove generated file config.h.
4399 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4401 * Makefile.in (distclean): Remove generated file config.h.
4403 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4405 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4407 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4409 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4410 rather than numopcodes. Use m68k_opcodes rather than removed
4411 opcode function. Don't check F_ALIAS.
4412 (print_insn_arg): Change first parameter to be const char *.
4413 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4414 (m68k-opc.o): New target.
4415 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4416 * configure: Rebuild.
4418 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4420 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4421 (opcode_bits, opcode_hash_table): New variables.
4422 (opcodes_initialized): Renamed from opcodes_sorted.
4423 (build_hash_table): New function.
4424 (is_delayed_branch): Use hash table.
4425 (print_insn): Renamed from print_insn_sparc, made static.
4426 Build and use hash table. If !sparc64, ignore sparc64 insns,
4427 and vice-versa if sparc64.
4428 (print_insn_sparc, print_insn_sparc64): New functions.
4429 (compare_opcodes): Move sparc64 opcodes to end.
4430 Print commutative insns with constant second.
4431 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4433 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4435 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4436 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4437 avoids printing a delay slot in a delay slot.
4438 * sh-opc.h (sh_table): Fully bracket last entry.
4440 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4442 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4444 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4446 * configure.in: Get host_makefile_frag from ${srcdir}.
4448 * configure.in: Autoconfiscated. Check for string[s].h. Create
4449 config.h from config.in. Don't set up sysdep.h link.
4450 * sysdep.h: New file.
4451 * configure, config.in: New files, generated from configure.in.
4452 * Makefile.in: Updated to be processed autoconf-style.
4453 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4454 (Makefile): Depend on config.status.
4455 (config.status): New rule.
4456 * configure.bat: Update Makefile substitutions.
4458 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4460 * mips-opc.c (L1): Define.
4461 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4462 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4465 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4467 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4468 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4469 have multiple add units but only a single logical unit.
4471 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4472 shifted by 18, without any insertion or extraction function.
4473 (insert_cr, extract_cr): Remove.
4475 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4477 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4480 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4482 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4483 * sh-opc.h: Add copyright.
4485 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4487 * Makefile.in (crunch-m68k): Delete extra target accidentally
4488 checked in a while ago.
4490 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4492 * sh-opc.h (sh_table): Add SH3 support.
4494 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4496 * sh-opc.h: Added bsrf and braf.
4498 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4500 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4501 bogus [ls]fm{ea,fd} patterns.
4503 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4504 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4505 initialize it from memory. Make function static.
4506 (print_insn_{big,little}_arm): New functions.
4507 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4508 the correct endianness.
4510 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4512 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4515 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4517 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4518 17th, so that it builds again using GCC as the compiler.
4520 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4522 * mips-dis.c (print_insn_little_mips): Cast return value from
4523 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4524 expects an unsigned long, and that might be fewer words of
4525 argument storage (e.g., if bfd_vma is long long on a 32-bit
4527 (print_insn_big_mips): Likewise with bfd_getb32 value.
4528 (_print_insn_mips): Now static.
4530 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4532 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4533 gcc memory hog problem with initializer is fixed.
4535 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4537 Merge in support for Mac MPW as a host.
4538 (Old change descriptions retained for informational value.)
4540 * mpw-config.in (archname): Compute from the config.
4541 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4543 * mpw-config.in (target_arch): Compute from canonical target.
4544 (m68k, mips, powerpc, sparc): Add architectures.
4545 * mpw-make.in (disassemble.c.o): Add.
4546 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4548 * mpw-config.in (BFD_MACHINES): Set to a default value.
4549 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4551 * mpw-make.in (CSEARCH): Add extra-include to search path.
4553 * mpw-config.in (varargs.h): Don't create.
4554 (sysdep.h): Create using forward-include.
4555 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4557 * mpw-config.in: New file, MPW version of configure.in.
4558 * mpw-make.in: New file, MPW version of Makefile.in.
4560 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4562 * alpha-dis.c (print_insn_alpha): Put empty statement after
4565 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4567 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4568 (low_sign_extend): Likewise.
4569 (get_field): Delete unused function.
4570 (set_field, deposit_14, deposit_21): Likewise.
4572 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4574 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4577 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4579 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4581 * alpha-opc.h (OSF_ASMCODE): define
4582 print pal-code names as defined in App C of the
4583 Alpha Architecture Reference Manual
4585 * alpha-dis.c: cleaned up output
4586 print stylized code forms as defined in App A.4.3 of the
4587 Alpha Architecture Reference Manual
4589 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4591 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4593 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4596 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4598 * m68k-dis.c (opcode): New function. Returns address of opcode
4599 table entry given index, even if the opcode table was split to
4600 work around gcc bugs.
4601 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4603 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4604 (reg_names): Now const.
4605 (print_insn_arg): Arrays cacheFieldName and names now const.
4606 (print_indexed): Array scales now const.
4608 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4610 * ppc-opc.c: Sort recently added instructions by minor opcode
4611 number within major opcode number.
4613 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4615 * hppa-dis.c: Include libhppa.h.
4617 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4619 * mips-opc.c: Change dli to use M_DLI, and add dla.
4621 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4623 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4625 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4627 * mips-opc.c: Add r4650 mul instruction.
4629 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4631 * mips-opc.c: Add uld and usd macros for unaligned double load and
4634 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4636 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4637 mfdcr, mtdcr, icbt, iccci.
4639 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4641 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4642 signed char fields to shorts, more portable.
4644 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4646 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4647 char fields as signed chars, since they may have negative values.
4649 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4651 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4652 (mycroft@netbsd.org).
4654 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4656 From "Logg, Ed" <elogg@ea.com>:
4657 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4658 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4661 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4663 * ppc-opc.c: Changes based on patch from David Edelsohn
4664 <edelsohn@mhpcc.edu>.
4665 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4668 (insert_tbr): New static function.
4669 (extract_tbr): New static function.
4670 (XFXFXM_MASK, XFXM): Define.
4671 (XSPRBAT_MASK, XSPRG_MASK): Define.
4672 (powerpc_opcodes): Add instructions to access special registers by
4673 name. Add mtcr and mftbu.
4675 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4677 * mips-opc.c (P3): Define.
4678 (mips_opcodes): Add mad and madu.
4680 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4682 * configure.in: Add W65 support.
4683 * disassemble.c: Likewise.
4684 * w65-opc.h, w65-dis.c: New files.
4686 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4688 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4691 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4693 * mips-opc.c: Add dli as a synonym for li.
4695 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4697 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4698 print something for reserved opcode values, even if it won't
4701 * mips-dis.c (_print_insn_mips): When initializing, shift right
4702 and mask, to avoid sign extension problems on the Alpha.
4704 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4707 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4709 * sh-opc.h (mov.l gbr): Get direction right.
4710 * sh-dis.c (print_insn_shx): New function.
4711 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4712 print opcodes with right byte order.
4714 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4716 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4717 to avoid conflicts with getopt.
4719 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4721 * hppa-dis.c (print_insn_hppa): Read the instruction using
4722 bfd_getb32, so that it works on a little endian or 64 bit host.
4723 Remove unused local variable op.
4725 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4727 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4728 addu does not work correctly if -mips3.
4730 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4732 * a29k-dis.c (print_special): Add special register names defined
4733 on 29030, 29040 and 29050.
4734 (print_insn): Handle new operand type 'I'.
4736 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4738 * Makefile.in (INSTALL): Use top level install.sh script.
4740 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4742 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4743 that it works on a little endian host.
4745 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4747 * configure.in: Use ${config_shell} when running config.bfd.
4749 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4751 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4753 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4755 * a29k-dis.c (print_insn): Print the opcode.
4757 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4759 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4761 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4763 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4765 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4767 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4768 which store a value into memory.
4770 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4772 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4773 * arm-dis.c, arm-opc.h: New files.
4775 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4777 * Makefile.in (ns32k-dis.o): Add dependency.
4778 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4779 string, not as array of chars.
4781 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4783 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4785 * sparc-opc.c: Added sparclite extended FP operations, and
4786 versions of v9 impdep* instructions permitting specification of
4789 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4791 * i960-dis.c (reg_names): Now const.
4792 (struct sparse_tabent): New type, copied from array type in mem
4794 (ctrl): Local static array ctrl_tab now const.
4795 (cobr): Local static array cobr_tab now const.
4796 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4797 static variable mem_tab no longer explicitly initialized. Changed
4798 mem_init to const array of struct sparse_tabent.
4799 (reg): Local static variable reg_tab no longer explicitly
4800 initialized. Changed reg_init to const array of struct
4802 (ea): Local static array scale_tab now const.
4804 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4807 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4809 * configure.bat: the disassember needs to be enabled for
4810 "objdump -d" to work in djgpp.
4812 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4814 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4815 (invalid_float): Enabled general version, doesn't require running
4816 on ns32k host. Changed to take char* argument, and test for
4817 explicitly specified sizes, instead of using sizeof() on host CPU
4819 (INVALID_FLOAT): Cast first argument.
4820 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4821 list_P032, list_M032): Now const.
4822 (optlist, list_search): Made appropriate arguments now point to
4824 (print_insn_arg): Changed static array of one-character-string
4825 pointers into a static const array of characters; fixed sprintf
4826 statement accordingly.
4828 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4830 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4831 from distribution. A ns32k-dis.c from a previous distribution has
4832 been brought up to date and supports the new interface.
4834 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4836 * configure.in: add bfd_ns32k_arch target support.
4838 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4839 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4841 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4843 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4846 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4848 * h8300-dis.c, mips-dis.c: Don't use true and false.
4850 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4852 * configure.in: Change --with-targets to --enable-targets.
4854 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4856 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4857 opcodes to the first instruction with that opcode, to speed
4858 disassembly of large files. From ralphc@pyramid.com (Ralph
4861 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4863 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4865 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4867 * configure.bat: update to latest makefile.in
4869 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4871 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4872 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4873 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4874 slot insn is in a delay slot.
4875 * z8k-opc.h: (resflg): Fix patterns.
4876 * h8500-opc.h Fix CR insn patterns.
4878 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4880 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4881 "cmpl" before POWER versions, so that gas -many uses them.
4883 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4885 * disassemble.c: New file.
4886 * Makefile.in (OFILES): Add disassemble.o.
4887 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4888 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4889 binutils/configure.in.
4891 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4892 opcode being examined.
4894 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4897 (insert_ral, insert_ram, insert_ras): New functions.
4898 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4899 RAS for store with update.
4901 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4903 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4904 (edelsohn@npac.syr.edu).
4906 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4908 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4911 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4913 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4915 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4917 * ppc-opc.c (powerpc_operands): The signedp field has been
4918 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4919 instead. Add new operand SISIGNOPT.
4920 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4921 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4922 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4925 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4927 * i386-dis.c (struct private): Renamed to dis_private. `private'
4928 is a reserved word for dynix cc.
4930 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4932 * configure.in: Change error message to refer to bfd/config.bfd
4933 rather than bfd/configure.in.
4935 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4937 * ppc-opc.c: Define POWER2 as short alias flag.
4938 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4941 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4943 * i960-dis.c (print_insn_i960): Don't read a second word for
4944 opcodes 0, 1, 2 and 3.
4946 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4948 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4950 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4952 * m68881-ext.c: Removed; no longer used.
4953 * Makefile.in: Changed accordingly.
4955 * m68k-dis.c (ext_format_68881): Don't declare.
4956 (print_insn_m68k): If an instruction uses place 'i', it uses at
4957 least four fixed bytes.
4958 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4959 extended float, convert to double using floatformat_to_double, not
4960 ieee_extended_to_double, and fetch the data before converting it.
4962 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4964 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4965 davidj@ICSI.Berkeley.EDU (David Johnson).
4967 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4969 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4970 PowerPC uses bdnz[l][a].
4972 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4974 * dis-buf.c, i386-dis.c: Include sysdep.h.
4976 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4978 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4980 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4981 by Motorola PowerPC 601 with PPC_OPCODE_601.
4982 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4983 Disassemble Motorola PowerPC 601 instructions as well as normal
4984 PowerPC instructions.
4986 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4988 * i960-dis.c (reg, mem): Just use a static array instead of
4991 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4993 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4994 condition name index if this is for a negated condition.
4996 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4997 Floating point format for 'H' operand is backwards from normal
4998 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4999 operands (fmpyadd and fmpysub), handle bizarre register
5000 translation correctly for single precision format.
5002 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5003 or 'I' operands if the next format specifier is 'M' (fcmp
5004 condition completer).
5006 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5008 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5009 single number giving a bitmask for the MB and ME fields of an M
5010 form instruction. Change NB to accept 32, and turn it into 0;
5011 also turn 0 into 32 when disassembling. Seperated SH from NB.
5012 (insert_mbe, extract_mbe): New functions.
5013 (insert_nb, extract_nb): New functions.
5014 (SC_MASK): Mask out SA and LK bits.
5015 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5016 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5017 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5018 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5019 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5020 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5021 (powerpc_macros): Define table of macro definitions.
5022 (powerpc_num_macros): Define.
5024 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5025 if PPC_OPERAND_NEXT is set.
5027 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5029 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5030 char. Retrieve contents using bfd_getl32 instead of shifting.
5032 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5034 * ppc-opc.c: New file. Opcode table for PowerPC, including
5035 opcodes for POWER (RS/6000).
5036 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5037 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5038 (CFILES): Add ppc-dis.c.
5039 (ppc-dis.o, ppc-opc.o): New targets.
5040 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5042 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5044 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5045 No space before 'u', 'f', or 'N'.
5047 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5049 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5050 farther than we should.
5052 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5054 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5056 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5058 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5060 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5061 needs it, to prevent reading past the end of a section.
5063 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5065 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5066 Removed t,A case for la; always use t,A(b) case.
5068 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 From Ted Lemen <mellon@pepper.ncd.com>
5071 * mips-dis.c (print_insn_arg): Handle 'k'.
5072 * mips-opc.c: Make cache use k, not t.
5074 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5076 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5077 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5078 FLOAT_FORMAT_CODE to put out floating point register names.
5080 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5082 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5084 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5086 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5088 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5090 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5091 larger than 32. Moved dsxx32 variants first for disassembler.
5093 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5095 * z8kgen.c, z8k-opc.h: Add full lda information.
5097 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5099 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5100 movb instructions. Any necessary space will be emitted by
5101 the code to handle nullification completers.
5103 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5105 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5107 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5109 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5110 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5112 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5114 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5116 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5118 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5119 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5121 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5123 * m88k-dis.c (m88kdis): comment change. Remove space after
5125 (printop): handle new arg types DEC and XREG for m88110.
5127 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5129 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5130 type for absolute branch addresses. Delete special
5131 "ble" and "be" code in 'W' operand code.
5133 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5135 * mips-opc.c: Set hazard information correctly for branch
5136 likely instructions.
5138 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5140 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5141 info->fprintf_func for printing and info->print_address_func for
5144 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5146 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5148 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5150 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5151 Corrected second case of "b" for disassembler.
5153 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5155 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5156 to BFD swapping routines to correspond to BFD name changes.
5158 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5160 * mips-opc.c: Change div machine instruction to be z,s,t rather
5161 than s,t. Change div macro to be d,v,t rather than d,s,t.
5162 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5163 rem and remu which generates only the corresponding div
5164 instruction. This is for compatibility with the MIPS assembler,
5165 which only generates the simple machine instruction when an
5166 explicit destination of $0 is used.
5167 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5169 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5171 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5172 WR_31 hazard for bal, bgezal, bltzal.
5174 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5176 * hppa-dis.c (print_insn_hppa): Use print function
5177 from within the disassemble_info, not fprintf_filtered.
5179 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5181 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5182 Law, law@cs.utah.edu.)
5184 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5186 * mips-opc.c ("absu"): Removed.
5189 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5191 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5192 Changed hazard information to distinguish between memory load
5193 delays and coprocessor load delays.
5195 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5197 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5199 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5201 * configure.in: Don't pass cpu to config.bfd.
5203 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5205 * m88k-dis.c (m88kdis): Make class unsigned.
5207 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5209 * alpha-dis.c (print_insn_alpha): One branch format case was
5210 missing the instruction name.
5212 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5214 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5215 Add the arch-specific auxiliary files.
5216 (OFILES): Remove the arch-specific auxiliary files
5217 and use BFD_MACHINES instead of DIS_LIBS.
5218 * configure.in: Set BFD_MACHINES based on --with-targets option.
5220 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5222 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5225 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5227 * sparc-opc.c: Change CONST to const to deal with gcc
5228 -Dconst=__const -traditional.
5230 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5232 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5233 coprocessor instructions out of #if 0, and made them use new
5236 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5238 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5240 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5242 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5243 instruction, for use by the disassembler.
5245 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5246 hand-coded sign extensions that depended on 32-bit host ints.
5247 FIXME, we still depend on big-endian host bitfield ordering.
5248 (sparc_print_insn): Set the insn_info_valid field, and the
5249 other fields that describe the instruction being printed.
5251 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5253 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5254 `jmp' instead of just one of them.
5256 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5258 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5259 (fput_fp_reg_r): Renamed from fput_reg_r.
5260 (fput_fp_reg): New function.
5261 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5263 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5265 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5267 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5269 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5271 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5272 don't output a space.
5274 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5276 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5278 * mips-opc.c: New file, containing opcode table from
5279 ../include/opcode/mips.h.
5280 * Makefile.in: Add it.
5282 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5284 * m88k-dis.c: New file, moved in from gdb and changed to use the
5285 new dis-asm.h disassembler interface.
5286 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5287 (m88k-dis.o): New target.
5289 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5291 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5292 argument string const char * to correspond to opcode/mips.h.
5294 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5296 * mips-dis.c: Updated to account for name changes in new version
5298 * Makefile.in: Added header file dependencies.
5300 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5302 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5304 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5306 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5307 extend, rather than shifts.
5309 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5311 * Makefile.in: Undo 15 June change.
5313 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5315 * m68k-dis.c (print_insn_arg): Change return value to byte count
5317 * m68k-dis.c: Re-write to detect invalid operands before
5318 printing anything, so we can handle this the same way we
5319 handle invalid opcodes.
5321 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5323 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5325 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5327 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5330 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5332 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5334 * configure.in: Do make sysdep.h link.
5335 * Makefile.in: Search ../include. Don't search ../bfd.
5337 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5339 Changes from Jeff Law, law@cs.utah.edu:
5340 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5341 Do not print a space before the completers specified by
5344 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5346 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5347 defined, since gdb has been fixed.
5349 Changes from Jeff Law, law@cs.utah.edu:
5350 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5351 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5352 be a *disassemble_info, not a *FILE.
5353 * hppa-dis.c: Support 'd', '!', and 'a'.
5354 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5355 * hppa-dis.c: Delete cases which are no longer needed.
5357 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5359 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5361 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5363 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5366 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5368 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5369 * configure.in: No longer need to configure to get sysdep.h.
5371 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5373 * Patches from Jeffrey Law <law@cs.utah.edu>.
5374 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5375 templates for 1.1 FP computational instructions.
5377 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5379 * h8500-dis.c (print_insn_h8500): Address argument is type
5381 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5384 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5385 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5387 * sparc-dis.c (compare_opcodes): Move static declaration to
5390 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5392 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5393 instruction, remove unimp hack from 'l' argument.
5395 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5397 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5400 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5402 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5403 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5406 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5408 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5409 arrays of string pointers to 2-d arrays of chars, to save
5412 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5414 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5415 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5417 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5419 * hppa-dis.c: New file from Utah, adapted to new disassembler
5421 * Makefile.in: Include it.
5423 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5425 * sh-dis.c, sh-opc.h: New files.
5427 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5429 * alpha-dis.c, alpha-opc.h: New files.
5431 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5433 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5436 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5438 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5440 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5442 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5445 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5447 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5448 and double percent signs a few places.
5450 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5452 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5453 Use info->print_address_func not print_address.
5455 * dis-buf.c (generic_print_address): New function.
5457 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5459 * Makefile.in: Add sparc-dis.c.
5460 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5462 Add `add' instruction to the set that get checked
5463 for a preceding `sethi' in order to print an absolute address.
5464 * (print_insn): Disassembly prefers real instructions.
5465 (is_delayed_branch): Speed up.
5466 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5467 Still missing some float ops, and needs testing.
5468 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5469 F_ALIAS. Use printf, not fprintf, when not passing a file
5471 (compare_opcodes): Check that identical instructions have
5472 identical opcodes, complain otherwise.
5475 * Include reg_names.
5477 Use dis-asm.h/read_memory_func interface.
5479 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5481 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5482 deliberately return non-zero to setjmp from longjmp. Otherwise
5483 this code fails to compile.
5485 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5487 * m68k-dis.c: Fix prototype for fetch_arg().
5489 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5491 * dis-buf.c: New file, for new read_memory_func interface.
5492 Makefile.in (OFILES): Include it.
5493 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5494 Use new read_memory_func interface.
5496 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5498 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5499 * h8500-opc.h: Fix couple of opcodes.
5501 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5503 * Makefile.in: add dvi & installcheck targets
5505 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5507 * Makefile.in: Update for h8500-dis.c.
5509 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5511 * h8500-dis.c, h8500-opc.h: New files
5513 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5515 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5516 ../include/dis-asm.h.
5517 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5518 and ../gdb/m68k-pinsn.c).
5519 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5520 and ../gdb/i386-pinsn.c).
5521 * m68881-ext.c: New file. Moved definition of
5522 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5523 * Makefile.in: Adjust for new files.
5524 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5525 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5526 can be dis-assembled.
5528 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5530 * mips-dis.c (print_insn_arg): Now returns void.
5532 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5534 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5535 files that use the macros.
5537 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5539 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5540 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5541 (CFILES): Added mips-dis.c.
5543 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5545 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5546 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5548 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5550 * Makefile.in: Improve *clean rules.
5551 * configure.in: Allow a default host.
5553 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5555 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5556 files include other sysdep files
5558 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5560 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5562 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5564 * configure.in: For host support, use ../bfd/configure.host
5565 so it stays in sync with the ../bfd/hosts database.
5567 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5569 * configure.in: use cpu-vendor-os triple instead of nested cases
5571 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5573 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5574 *always* the wrong one.
5576 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5578 * z8kgen.c: added copyright info
5580 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5582 * z8k-dis.c (unparse_instr): prettier tabs
5583 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5585 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5587 * configure.in: Add ncr* configuration.
5588 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5589 picayune ANSI compilers happy.
5591 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5593 * configure.in (i386): Make i386 and i486 synonymous for now.
5594 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5596 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5598 * Makefile.in (install): Fix typo.
5600 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5602 * Makefile.in (make): Remove obsolete crud.
5603 (sparc-opc.o): Avoid Sun Make VPATH bug.
5605 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5607 * Makefile.in: since there are no SUBDIRS, remove rule and
5608 references of subdir_do.
5610 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5612 * Makefile.in (install): Get the library name right here too.
5613 Don't install bfd.h, since it's unrelated to this library. No
5614 subdirs to recurse into, either.
5615 (CFILES): The source file has a .c suffix, not .o.
5617 * sparc-opc.c: New file, moved from BFD.
5618 * Makefile.in (OFILES): Build it.
5620 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5622 * z8k-dis.c: fixed forward refferences of some declarations.
5624 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5626 * Makefile.in: get the name of the library right
5628 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5630 * z8k-dis.c: knows how to disassemble z8k stuff
5631 * z8k-opc.h: new file full of z8000 opcodes
5635 version-control: never
projects / deliverable / binutils-gdb.git / blob