1 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
5 * Makefile.in (install): Use @INSTALL_SHLIB@.
8 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
10 * configure: (bfd_d10v_arch) Add new case.
11 * configure.in: (bfd_d10v_arch) Add new case.
12 * d10v-dis.c: New file.
13 * d10v-opc.c: New file.
14 * disassemble.c (disassembler) Add entry for d10v.
17 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
19 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
20 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
22 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
24 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
25 distinguish between variants of the instruction set.
26 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
27 distinguish between variants of the instruction set.
29 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
31 * i386-dis.c (print_insn_i8086): New routine to disassemble using
32 the 8086 instruction set.
33 * i386-dis.c: General cleanups. Make most things static. Add
34 prototypes. Get rid of static variables aflags and dflags. Pass
35 them as args (to almost everything).
37 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
39 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
41 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
43 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
44 if the next arg is marked with SRC_IN_DST. Gross.
46 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
47 we're looking for and find EXR.
49 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
50 if we're looking for KBIT and we don't find it.
52 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
55 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
56 3bit immediate operands.
58 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
60 * Released binutils 2.7.
62 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
63 <kkaempf@progis.ac-net.de>.
65 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
67 * alpha-opc.c: Correct second case of "mov" to use OPRL.
69 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
71 * sparc-dis.c (print_insn_sparclite): New routine to print
72 sparclite instructions.
74 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
76 * m68k-opc.c (m68k_opcodes): Add coldfire support.
78 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
80 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
81 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
82 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
84 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
86 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
87 Use autoconf-set values.
88 (docdir, oldincludedir): Removed.
89 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
91 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
93 * alpha-opc.c: New file.
94 * alpha-opc.h: Remove.
95 * alpha-dis.c: Complete rewrite to use new opcode table.
96 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
97 * configure: Rebuild with autoconf 2.10.
98 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
99 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
101 (alpha-opc.o): New target.
103 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
105 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
106 Set imm_added_to_rs1 even if the source and destination register
109 * sparc-opc.c: Add some two operand forms of the wr instruction.
111 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
113 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
116 * disassemble.c (disassembler): Handle H8/S.
117 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
119 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
121 * sparc-opc.c: Add beq/teq as aliases for be/te.
123 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
124 <sergei@msil.sps.mot.com>.
126 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
128 * makefile.vms: New file.
130 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
132 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
134 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
137 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
139 * i386-dis.c (OP_OFF): Call append_prefix.
141 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
143 * ppc-opc.c (instruction encoding macros): Add explicit casts to
144 unsigned long to silence a warning from the Solaris PowerPC
147 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
149 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
151 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
153 * sparc-dis.c (X_IMM,X_SIMM): New macros.
155 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
156 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
157 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
158 cpush, cpusha, cpull sparclet insns.
160 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
162 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
164 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
166 * sparc-opc.c: Set F_FBR on floating point branch instructions.
167 Set F_FLOAT on other floating point instructions.
169 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
171 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
173 (powerpc_opcodes): Add 860/821 specific SPRs.
175 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
177 * configure.in: Permit --enable-shared to specify a list of
178 directories. Set and substitute BFD_PICLIST.
179 * configure: Rebuild.
180 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
181 uses. Set to @BFD_PICLIST@.
183 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
185 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
186 not "abs", which may be needed for the absolute in something
187 like btst #0,@10:8. Print L_3 immediates separately from other
188 immediates. Change ABSMOV reference to ABS8MEM.
190 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
192 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
193 (current_arch_mask): New static global.
194 (compute_arch_mask): New static function.
195 (print_insn_sparc): Delete sparc_v9_p. New static local
196 current_mach. Resort opcode table if current_mach changes.
197 Generalize "insn not supported" test.
198 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
199 Delete test for v9/!v9.
200 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
202 (brfc): Split into CBR and FBR for coprocessor/fp branches.
203 (brfcx): Renamed to FBRX.
204 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
205 coprocessor mnemonics are not supported on the sparclet).
206 (condf): Renamed to CONDF.
207 (SLCBCC2): Delete F_ALIAS flag.
209 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
211 * sparc-opc.c (sparc_opcodes): rd must be 0 for
212 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
214 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
216 * Makefile.in (config.status): Depend upon BFD VERSION file, so
217 that the shared library version number is set correctly.
219 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
221 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
222 Miles Bader <miles@gnu.ai.mit.edu>.
223 * configure: Rebuild.
225 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
227 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
230 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
232 * configure: Rebuild with autoconf 2.8.
234 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
236 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
237 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
239 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
241 * configure.in: Don't set SHLIB or SHLINK to an empty string,
242 since they appear as targets in Makefile.in.
243 * configure: Rebuild.
245 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
247 * mpw-make.sed: Edit out shared library support bits.
249 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
251 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
252 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
253 (sparc_opcodes): Add sparclet insns.
254 (sparclet_cpreg_table): New static local.
255 (sparc_{encode,decode}_sparclet_cpreg): New functions.
256 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
258 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
260 * i386-dis.c (index16): New static variable.
261 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
263 (OP_indirE): Return result of OP_E.
264 (OP_E): Check for 16 bit addressing mode, and disassemble
265 correctly. Optimised 32 bit case a little. Don't print
266 "(base,index,scale)" when sib specifies only an offset.
268 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
270 * configure.in: Set and substitute SHLIB_DEP.
271 * configure: Rebuild.
272 * Makefile.in (SHLIB_DEP): New variable.
273 (LIBIBERTY_LISTS, BFD_LIST): New variables.
274 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
275 COMMON_SHLIB, add them to piclist with appropriate modifications.
276 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
277 here: just use piclist.
279 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
281 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
282 (print_insn_sparc): Rewrite v9/not-v9 tests.
283 (compare_opcodes): Likewise.
284 * sparc-opc.c (MASK_<ARCH>): Define.
285 (v6,v7,v8,sparclite,v9,v9a): Redefine.
286 (sparclet,v6notv9): Define.
287 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
288 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
290 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
292 * configure.in: Call AC_PROG_CC before configure.host.
293 * configure: Rebuild.
295 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
297 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
299 * i386-dis.c (onebyte_has_modrm): New static array.
300 (twobyte_has_modrm): New static array.
301 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
303 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
305 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
308 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
310 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
313 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
315 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
316 m68010up, not just m68020up | cpu32.
318 * Makefile.in (SONAME): New variable.
319 ($(SHLINK)): Make a link to the transformed name, as well.
320 (stamp-tshlink): New target.
321 (install): Skip stamp-tshlink during install.
323 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
325 * configure.in: Call AC_ARG_PROGRAM.
326 * configure: Rebuild.
327 * Makefile.in (program_transform_name): New variable.
328 (install): Transform library name before installing it.
330 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
332 * i960-dis.c (mem): Add HX dcinva instruction.
334 Support for building as a shared library, based on patches from
335 Alan Modra <alan@spri.levels.unisa.edu.au>:
336 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
337 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
338 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
339 * configure: Rebuild.
340 * Makefile.in (ALLLIBS): New variable.
341 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
342 (COMMON_SHLIB, SHLINK): New variables.
343 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
344 (STAGESTUFF): Remove variable.
345 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
346 (stamp-piclist, piclist): New targets.
347 ($(SHLIB), $(SHLINK)): New targets.
348 ($(OFILES)): Depend upon stamp-picdir.
349 (disassemble.o): Build twice if PICFLAG is set.
350 (MOSTLYCLEAN): Add pic/*.o.
351 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
352 (distclean): Remove pic and stamp-picdir.
353 (install): Install shared libraries.
354 (stamp-picdir): New target.
356 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
358 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
359 Print unknown instruction as "unknown", rather than in hex.
361 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
363 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
365 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
367 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
369 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
371 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
372 when necessary. From Ulrich Drepper
373 <drepper@myware.rz.uni-karlsruhe.de>.
375 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
377 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
378 sparc_num_opcodes. Update architecture enum values.
379 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
380 (sparc_opcode_lookup_arch): New function.
381 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
382 (sparc_opcodes): Add v9a shutdown insn.
384 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
386 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
387 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
389 (print_insn_sparc64): Deleted.
390 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
393 * sparc-opc.c (architecture_pname): Add v9a.
395 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
397 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
398 incorrectly defined as 0x16 when it should be 0x15.
399 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
400 (alpha_insn_set): added cvtst and cvttq float ops. Also added
401 excb (exception barrier) which is defined in the Alpha
402 Architecture Handbook version 2.
403 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
404 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
405 disassembled as or, for example.
407 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
409 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
410 (_print_insn_mips): Change i from int to unsigned int.
412 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
414 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
415 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
417 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
419 * i386-dis.c: Added Pentium Pro instructions.
421 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
423 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
426 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
428 * sh-opc.h (sh_nibble_type): Added REG_B.
429 (sh_arg_type): Added A_REG_B.
430 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
432 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
434 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
436 * disassemble.c (disassembler): Use new bfd_big_endian macro.
438 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
440 * Makefile.in (distclean): Remove stamp-h. From Ronald
441 F. Guilmette <rfg@monkeys.com>.
443 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
445 From David Mosberger-Tang <davidm@azstarnet.com>:
446 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
449 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
451 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
452 (sh_table): Added many SH3 opcodes.
453 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
455 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
457 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
458 (subco,subco.): Mark this PPC, not PPCCOM.
460 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
462 * configure: Rebuild with autoconf 2.7.
464 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
466 * configure: Rebuild with autoconf 2.6.
468 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
470 * configure.in: Sort list of architectures. Accept but do nothing
471 for alliant, convex, pyramid, romp, and tahoe.
473 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
475 * a29k-dis.c (print_special): Change num to unsigned int.
477 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
479 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
482 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
484 * configure.in: Call AC_CHECK_PROG to find and cache AR.
485 * configure: Rebuilt.
487 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
489 * configure.in: Add case for bfd_i860_arch.
490 * configure: Rebuild.
492 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
494 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
495 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
496 (NEXTDOUBLE): Likewise.
497 (print_insn_m68k): Don't match fmoveml if there is more than one
498 register in the list.
499 (print_insn_arg): Handle a place of '8' for a type of 'L'.
501 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
503 * m68k-opc.c: Use #W rather than #w.
504 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
506 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
508 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
509 and likewise for all the dbxx opcodes.
511 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
513 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
515 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
517 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
518 the VR4100 specific instructions to the mips_opcodes structure.
520 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
522 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
523 ugly Metrowerks bug in CW6, is fixed in CW7.
525 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
527 * ppc-opc.c (whole file): Add flags for common/any support.
529 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
531 * Makefile.in (BISON): Remove macro.
532 (FLAGS_TO_PASS): Remove BISON.
534 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
536 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
538 * m68k-dis.c (print_insn_m68k): Recognize all two-word
539 instructions that take no args by looking at the match mask.
540 (print_insn_arg): Always print "%" before register names.
541 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
542 [case '_']: Don't print "@#" before address.
543 [case 'J']: Use "%s" as format string, not register name.
544 [case 'B']: Treat place == 'C' like 'l' and 'L'.
546 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
548 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
551 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
553 From David Mosberger-Tang <davidm@azstarnet.com>
555 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
556 (alpha_insn_set): added definitions for VAX floating point
557 instructions (Unix compilers don't generate these, but handcoded
558 assembly might still use them).
560 * alpha-dis.c (print_insn_alpha): added support for disassembling
561 the miscellaneous instructions in the Alpha instruction set.
563 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
565 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
566 no longer create sysdep.h, sed ppc-opc.c to work around a
567 serious Metrowerks C bug.
568 * mpw-make.in: Remove.
569 * mpw-make.sed: New file, used by mpw-configure to edit
570 Makefile.in into an MPW makefile.
572 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
574 * Makefile.in (maintainer-clean): New synonym for realclean.
576 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
578 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
579 which use '0', '1', and '2' instead. Specify the proper size for
580 a pmove immediate operand. Correct the pmovefd patterns to be
581 moves to a register, not from a register.
582 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
584 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
586 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
587 %psr, %wim, %tbr as F_NOTV9.
589 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
591 * Makefile.in (Makefile): Just rebuild Makefile when running
593 (config.h, stamp-h): New targets.
594 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
595 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
597 * configure: Rebuild.
599 * mips-opc.c: Change unaligned loads and stores with "t,A"
600 operands to use "t,A(b)".
602 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
604 * sh-dis.c (print_insn_shx): Add F_FR0 support.
606 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
608 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
609 until 3 instead of until 2.
611 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
613 * Makefile.in (ALL_CFLAGS): Define.
614 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
615 (MOSTLYCLEAN): Add config.log.
616 (distclean): Don't remove config.log.
617 * configure.in: Substitute HDEFINES.
618 * configure: Rebuild.
620 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
622 * sh-opc.h (sh_arg_type): Add F_FR0.
623 (sh_table, case fmac): Add F_FR0 as first argument.
625 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
627 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
629 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
631 * sparc-dis.c: Remove all references to NO_V9.
633 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
635 * aclocal.m4: Just include ../bfd/aclocal.m4.
636 * configure: Rebuild.
638 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
640 * sparc-dis.c (X_DISP19): Define.
641 (print_insn, case 'G'): Use it.
642 (print_insn, case 'L'): Sign extend displacement.
644 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
646 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
647 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
648 host_makefile_frag or frags.
649 * aclocal.m4: New file.
650 * configure: Rebuild.
651 * Makefile.in (INSTALL): Set to @INSTALL@.
652 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
653 (INSTALL_DATA): Set to @INSTALL_DATA@.
655 (AR_FLAGS): Set to rc rather than qc.
656 (CC): Define as @CC@.
657 (CFLAGS): Set to @CFLAGS@.
658 (@host_makefile_frag@): Remove.
659 (config.status): Remove dependency upon @frags@.
661 * configure.in: ../bfd/config.bfd now just sets shell variables.
662 Use them rather than looking through target Makefile fragments.
663 * configure: Rebuild.
665 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
667 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
669 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
671 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
672 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
675 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
676 (lookup_{name,value}): New functions.
677 (prefetch_table): New static local.
678 (sparc_{encode,decode}_prefetch): New functions.
679 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
681 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
683 * sh-opc.h: Add blank lines to improve readabililty of sh3e
686 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
688 * sh-dis.c: Correct comment on first line of file.
690 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
692 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
694 * sparc-opc.c (asi, membar): New static locals.
695 (sparc_{encode,decode}_{asi,membar}): New functions.
696 (sparc_opcodes, membar insn): Fix.
697 * sparc-dis.c (print_insn): Call sparc_decode_asi.
698 Support decoding of membar masks.
701 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
703 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
705 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
707 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
708 and likewise for the other branches. Add bhs as an alias for bcc,
709 and likewise for the size variants. Add dbhs as an alias for
712 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
714 * sh-opc.h (FP sts instructions): Update to match reality.
716 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
718 * m68k-dis.c: (fpcr_names): Add % before all register names.
719 (reg_names): Likewise.
720 (print_insn_arg): Don't explicitly print % before register names.
721 Add % before register names in static array names. In case 'r',
722 print data registers as `@(Dn)', not `Dn@'. When printing a
723 memory address, don't print @# before it.
724 (print_indexed): Change base_disp and outer_disp from int to
725 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
726 syntax. Sign extend 8 byte displacement correctly.
727 (print_base): Print using MIT syntax. Print zpc when appropriate.
728 Change parameter disp from int to bfd_vma.
730 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
733 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
735 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
736 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
737 * sh-opc.h (sh_arg_type): Add new operand types.
738 (sh_table): Add new opcodes from SH3E Floating Point ISA.
740 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
742 * Makefile.in (distclean): Remove generated file config.h.
744 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
746 * Makefile.in (distclean): Remove generated file config.h.
748 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
750 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
752 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
754 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
755 rather than numopcodes. Use m68k_opcodes rather than removed
756 opcode function. Don't check F_ALIAS.
757 (print_insn_arg): Change first parameter to be const char *.
758 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
759 (m68k-opc.o): New target.
760 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
761 * configure: Rebuild.
763 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
765 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
766 (opcode_bits, opcode_hash_table): New variables.
767 (opcodes_initialized): Renamed from opcodes_sorted.
768 (build_hash_table): New function.
769 (is_delayed_branch): Use hash table.
770 (print_insn): Renamed from print_insn_sparc, made static.
771 Build and use hash table. If !sparc64, ignore sparc64 insns,
772 and vice-versa if sparc64.
773 (print_insn_sparc, print_insn_sparc64): New functions.
774 (compare_opcodes): Move sparc64 opcodes to end.
775 Print commutative insns with constant second.
776 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
778 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
780 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
781 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
782 avoids printing a delay slot in a delay slot.
783 * sh-opc.h (sh_table): Fully bracket last entry.
785 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
787 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
789 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
791 * configure.in: Get host_makefile_frag from ${srcdir}.
793 * configure.in: Autoconfiscated. Check for string[s].h. Create
794 config.h from config.in. Don't set up sysdep.h link.
795 * sysdep.h: New file.
796 * configure, config.in: New files, generated from configure.in.
797 * Makefile.in: Updated to be processed autoconf-style.
798 (distclean): Keep sysdep.h. Remove config.log and config.cache.
799 (Makefile): Depend on config.status.
800 (config.status): New rule.
801 * configure.bat: Update Makefile substitutions.
803 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
805 * mips-opc.c (L1): Define.
806 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
807 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
810 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
812 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
813 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
814 have multiple add units but only a single logical unit.
816 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
817 shifted by 18, without any insertion or extraction function.
818 (insert_cr, extract_cr): Remove.
821 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
823 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
826 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
828 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
831 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
833 * mpw-config.in: Add sh and i386 configs, remove sparc config.
834 * sh-opc.h: Add copyright.
836 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
838 * Makefile.in (crunch-m68k): Delete extra target accidentally
839 checked in a while ago.
841 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
843 * sh-opc.h (sh_table): Add SH3 support.
845 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
847 * sh-opc.h: Added bsrf and braf.
849 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
851 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
852 bogus [ls]fm{ea,fd} patterns.
854 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
855 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
856 initialize it from memory. Make function static.
857 (print_insn_{big,little}_arm): New functions.
858 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
859 the correct endianness.
862 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
864 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
865 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
868 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
870 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
873 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
875 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
876 17th, so that it builds again using GCC as the compiler.
878 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
880 * mips-dis.c (print_insn_little_mips): Cast return value from
881 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
882 expects an unsigned long, and that might be fewer words of
883 argument storage (e.g., if bfd_vma is long long on a 32-bit
885 (print_insn_big_mips): Likewise with bfd_getb32 value.
886 (_print_insn_mips): Now static.
888 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
890 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
891 gcc memory hog problem with initializer is fixed.
894 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
896 * arc-opc.c (NULL): Define.
897 (arc_operands, insn fields u,s): Delete.
898 (arc_operands, insn fields a,b,c): Mark as signed.
899 (arc_opcodes): No longer const, links computed at run-time.
900 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
901 suffixes that affect the insn code.
902 (arc_opcodes): Resort table to macros are first.
903 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
904 (arc_opcodes, st [b] entry): Likewise.
905 (arc_opcodes, st [b,d] entry): Fix mask, value.
906 (arc_reg_names): Add entries for r29, r30, r31, r60.
907 (opcode_map, icode_map): New static globals.
908 (arc_opcode_init_tables): Initialize them.
909 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
910 (insert_shimmoffset): Signal error if register present.
912 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
915 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
917 Merge in support for Mac MPW as a host.
918 (Old change descriptions retained for informational value.)
920 * mpw-config.in (archname): Compute from the config.
921 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
923 * mpw-config.in (target_arch): Compute from canonical target.
924 (m68k, mips, powerpc, sparc): Add architectures.
925 * mpw-make.in (disassemble.c.o): Add.
926 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
928 * mpw-config.in (BFD_MACHINES): Set to a default value.
929 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
931 * mpw-make.in (CSEARCH): Add extra-include to search path.
933 * mpw-config.in (varargs.h): Don't create.
934 (sysdep.h): Create using forward-include.
935 * mpw-make.in (CSEARCH): Add include/mpw to search path.
937 * mpw-config.in: New file, MPW version of configure.in.
938 * mpw-make.in: New file, MPW version of Makefile.in.
941 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
943 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
944 Call arc_get_opcode_mach to map bfd mach number to opcode value.
945 (print_insn_*): Pass bfd mach number, not opcode version.
946 * arc-opc.c (arc_get_opcode_mach): New function.
949 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
951 * alpha-dis.c (print_insn_alpha): Put empty statement after
954 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
956 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
957 (low_sign_extend): Likewise.
958 (get_field): Delete unused function.
959 (set_field, deposit_14, deposit_21): Likewise.
961 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
963 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
966 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
968 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
970 * alpha-opc.h (OSF_ASMCODE): define
971 print pal-code names as defined in App C of the
972 Alpha Architecture Reference Manual
974 * alpha-dis.c: cleaned up output
975 print stylized code forms as defined in App A.4.3 of the
976 Alpha Architecture Reference Manual
978 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
980 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
982 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
985 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
987 * m68k-dis.c (opcode): New function. Returns address of opcode
988 table entry given index, even if the opcode table was split to
989 work around gcc bugs.
990 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
992 (BREAK_UP_BIG_DECL): Make secondary array static and const.
993 (reg_names): Now const.
994 (print_insn_arg): Arrays cacheFieldName and names now const.
995 (print_indexed): Array scales now const.
998 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1000 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1001 (print_insn_arc_{host,graphics,audio}): Likewise.
1002 (print_insn): Add prototype.
1003 (arc_get_disassembler): New arg `big_p'. Return little or big
1004 print fn accordingly.
1005 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1006 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1007 (arc_opval_supported): Likewise.
1008 * disassemble.c (disassembler): Pass big endian flag to
1009 arc_get_disassembler.
1012 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1014 * ppc-opc.c: Sort recently added instructions by minor opcode
1015 number within major opcode number.
1017 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1019 * hppa-dis.c: Include libhppa.h.
1021 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1023 * mips-opc.c: Change dli to use M_DLI, and add dla.
1025 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1027 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1030 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1032 * arc-dis.c (arc_get_disassembler): Change argument to int,
1033 one of bfd_mach_arc_xxx. All callers updated.
1036 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1038 * mips-opc.c: Add r4650 mul instruction.
1040 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1042 * mips-opc.c: Add uld and usd macros for unaligned double load and
1045 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1047 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1048 mfdcr, mtdcr, icbt, iccci.
1051 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1053 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1054 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1055 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1056 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1057 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1058 (insert_absaddr): New function.
1060 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1062 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1063 New argument `cpu', pass it to arc_opcode_init_tables.
1064 Document byte order dependencies. Ignore unsupported insns.
1065 (arc_get_disassembler): New function.
1066 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1067 print_insn_arc_audio): New functions.
1068 * arc-opc.c (MULTSHIFT operand): Delete.
1069 (UNSIGNED, SATURATION): New operands.
1070 (mac, mul, mul64, mulu64): New insns.
1071 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1072 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1073 (host,graphics,audio extended and auxiliary regs): Define.
1074 (ss, sc, mh, ml): New suffixes.
1075 (arc_opcode_supported, arc_opval_supported): New functions.
1076 (insert_multshift, extract_multshift): Deleted.
1077 * disassemble.c (disassembler, case bfd_arch_arc): Call
1078 arc_get_disassembler to get disassembler routine.
1081 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1083 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1084 signed char fields to shorts, more portable.
1086 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1088 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1089 char fields as signed chars, since they may have negative values.
1091 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1093 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1094 (mycroft@netbsd.org).
1096 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1098 From "Logg, Ed" <elogg@ea.com>:
1099 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1100 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1103 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1105 * ppc-opc.c: Changes based on patch from David Edelsohn
1106 <edelsohn@mhpcc.edu>.
1107 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1110 (insert_tbr): New static function.
1111 (extract_tbr): New static function.
1112 (XFXFXM_MASK, XFXM): Define.
1113 (XSPRBAT_MASK, XSPRG_MASK): Define.
1114 (powerpc_opcodes): Add instructions to access special registers by
1115 name. Add mtcr and mftbu.
1117 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1119 * mips-opc.c (P3): Define.
1120 (mips_opcodes): Add mad and madu.
1122 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1124 * configure.in: Add W65 support.
1125 * disassemble.c: Likewise.
1126 * w65-opc.h, w65-dis.c: New files.
1128 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1130 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1134 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1136 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1138 * arc-opc.c (extract_reladdr): New function.
1139 (insert_reladdr): Store address right-shifted by 2.
1142 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1144 * mips-opc.c: Add dli as a synonym for li.
1147 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1149 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1151 (extraction fns): Insn argument now array of two words. Return pointer
1152 to value's table entry. All uses changed.
1153 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1154 (insert_multshift, extract_multshift): New fns.
1155 (arc_operands): Add support for cache bypass suffix. Add support for
1156 predefined aux regs. Modifier bits moved to flags field.
1157 (arc_opcodes): Likewise.
1158 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1159 New insn rlc. Update to syntax in programmer's manual.
1160 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1161 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1163 (arc_opcode_init_tables): New argument to indicate cpu type.
1164 (insert_reg): Handle predefined aux regs.
1165 (extract_reg): Likewise.
1166 (lookup_register): New fn.
1167 * arc-dis.c (arc_condition_codes): Deleted.
1168 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1169 Clean up modifier handling. Handle predefined aux regs.
1172 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1174 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1175 print something for reserved opcode values, even if it won't
1178 * mips-dis.c (_print_insn_mips): When initializing, shift right
1179 and mask, to avoid sign extension problems on the Alpha.
1181 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1185 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1187 * configure.in: Add ARC support.
1188 * disassemble.c: Likewise.
1189 * arc-dis.c, arc-opc.c: New files.
1192 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1194 * sh-opc.h (mov.l gbr): Get direction right.
1195 * sh-dis.c (print_insn_shx): New function.
1196 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1197 print opcodes with right byte order.
1199 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1201 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1202 to avoid conflicts with getopt.
1204 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1206 * hppa-dis.c (print_insn_hppa): Read the instruction using
1207 bfd_getb32, so that it works on a little endian or 64 bit host.
1208 Remove unused local variable op.
1210 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1212 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1213 addu does not work correctly if -mips3.
1215 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1217 * a29k-dis.c (print_special): Add special register names defined
1218 on 29030, 29040 and 29050.
1219 (print_insn): Handle new operand type 'I'.
1221 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1223 * Makefile.in (INSTALL): Use top level install.sh script.
1225 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1227 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1228 that it works on a little endian host.
1230 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1232 * configure.in: Use ${config_shell} when running config.bfd.
1234 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1236 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1238 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1240 * a29k-dis.c (print_insn): Print the opcode.
1242 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1244 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1246 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1248 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1250 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1252 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1253 which store a value into memory.
1255 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1257 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1258 * arm-dis.c, arm-opc.h: New files.
1260 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1262 * Makefile.in (ns32k-dis.o): Add dependency.
1263 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1264 string, not as array of chars.
1266 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1268 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1270 * sparc-opc.c: Added sparclite extended FP operations, and
1271 versions of v9 impdep* instructions permitting specification of
1274 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1276 * i960-dis.c (reg_names): Now const.
1277 (struct sparse_tabent): New type, copied from array type in mem
1279 (ctrl): Local static array ctrl_tab now const.
1280 (cobr): Local static array cobr_tab now const.
1281 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1282 static variable mem_tab no longer explicitly initialized. Changed
1283 mem_init to const array of struct sparse_tabent.
1284 (reg): Local static variable reg_tab no longer explicitly
1285 initialized. Changed reg_init to const array of struct
1287 (ea): Local static array scale_tab now const.
1289 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1292 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1294 * configure.bat: the disassember needs to be enabled for
1295 "objdump -d" to work in djgpp.
1297 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1299 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1300 (invalid_float): Enabled general version, doesn't require running
1301 on ns32k host. Changed to take char* argument, and test for
1302 explicitly specified sizes, instead of using sizeof() on host CPU
1304 (INVALID_FLOAT): Cast first argument.
1305 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1306 list_P032, list_M032): Now const.
1307 (optlist, list_search): Made appropriate arguments now point to
1309 (print_insn_arg): Changed static array of one-character-string
1310 pointers into a static const array of characters; fixed sprintf
1311 statement accordingly.
1313 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1315 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1316 from distribution. A ns32k-dis.c from a previous distribution has
1317 been brought up to date and supports the new interface.
1319 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1321 * configure.in: add bfd_ns32k_arch target support.
1323 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1324 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1326 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1328 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1331 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1333 * h8300-dis.c, mips-dis.c: Don't use true and false.
1335 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1337 * configure.in: Change --with-targets to --enable-targets.
1339 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1341 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1342 opcodes to the first instruction with that opcode, to speed
1343 disassembly of large files. From ralphc@pyramid.com (Ralph
1346 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1348 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1350 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1352 * configure.bat: update to latest makefile.in
1354 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1356 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1357 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1358 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1359 slot insn is in a delay slot.
1360 * z8k-opc.h: (resflg): Fix patterns.
1361 * h8500-opc.h Fix CR insn patterns.
1363 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1365 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1366 "cmpl" before POWER versions, so that gas -many uses them.
1368 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1370 * disassemble.c: New file.
1371 * Makefile.in (OFILES): Add disassemble.o.
1372 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1373 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1374 binutils/configure.in.
1376 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1377 opcode being examined.
1379 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1381 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1382 (insert_ral, insert_ram, insert_ras): New functions.
1383 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1384 RAS for store with update.
1386 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1388 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1389 (edelsohn@npac.syr.edu).
1391 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1393 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1396 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1398 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1400 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1402 * ppc-opc.c (powerpc_operands): The signedp field has been
1403 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1404 instead. Add new operand SISIGNOPT.
1405 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1406 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1407 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1410 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1412 * i386-dis.c (struct private): Renamed to dis_private. `private'
1413 is a reserved word for dynix cc.
1415 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1417 * configure.in: Change error message to refer to bfd/config.bfd
1418 rather than bfd/configure.in.
1420 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1422 * ppc-opc.c: Define POWER2 as short alias flag.
1423 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1426 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1428 * i960-dis.c (print_insn_i960): Don't read a second word for
1429 opcodes 0, 1, 2 and 3.
1431 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1433 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1435 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1437 * m68881-ext.c: Removed; no longer used.
1438 * Makefile.in: Changed accordingly.
1440 * m68k-dis.c (ext_format_68881): Don't declare.
1441 (print_insn_m68k): If an instruction uses place 'i', it uses at
1442 least four fixed bytes.
1443 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1444 extended float, convert to double using floatformat_to_double, not
1445 ieee_extended_to_double, and fetch the data before converting it.
1447 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1449 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1450 davidj@ICSI.Berkeley.EDU (David Johnson).
1452 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1454 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1455 PowerPC uses bdnz[l][a].
1457 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1459 * dis-buf.c, i386-dis.c: Include sysdep.h.
1461 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1463 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1465 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1466 by Motorola PowerPC 601 with PPC_OPCODE_601.
1467 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1468 Disassemble Motorola PowerPC 601 instructions as well as normal
1469 PowerPC instructions.
1471 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1473 * i960-dis.c (reg, mem): Just use a static array instead of
1476 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1478 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1479 condition name index if this is for a negated condition.
1481 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1482 Floating point format for 'H' operand is backwards from normal
1483 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1484 operands (fmpyadd and fmpysub), handle bizarre register
1485 translation correctly for single precision format.
1487 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1488 or 'I' operands if the next format specifier is 'M' (fcmp
1489 condition completer).
1491 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1493 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1494 single number giving a bitmask for the MB and ME fields of an M
1495 form instruction. Change NB to accept 32, and turn it into 0;
1496 also turn 0 into 32 when disassembling. Seperated SH from NB.
1497 (insert_mbe, extract_mbe): New functions.
1498 (insert_nb, extract_nb): New functions.
1499 (SC_MASK): Mask out SA and LK bits.
1500 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1501 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1502 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1503 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1504 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1505 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1506 (powerpc_macros): Define table of macro definitions.
1507 (powerpc_num_macros): Define.
1509 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1510 if PPC_OPERAND_NEXT is set.
1512 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1514 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1515 char. Retrieve contents using bfd_getl32 instead of shifting.
1517 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1519 * ppc-opc.c: New file. Opcode table for PowerPC, including
1520 opcodes for POWER (RS/6000).
1521 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1522 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1523 (CFILES): Add ppc-dis.c.
1524 (ppc-dis.o, ppc-opc.o): New targets.
1525 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1527 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1529 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1530 No space before 'u', 'f', or 'N'.
1532 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1534 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1535 farther than we should.
1537 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1539 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1541 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1543 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1545 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1546 needs it, to prevent reading past the end of a section.
1548 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1550 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1551 Removed t,A case for la; always use t,A(b) case.
1553 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1555 From Ted Lemen <mellon@pepper.ncd.com>
1556 * mips-dis.c (print_insn_arg): Handle 'k'.
1557 * mips-opc.c: Make cache use k, not t.
1559 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1561 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1562 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1563 FLOAT_FORMAT_CODE to put out floating point register names.
1565 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1567 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1569 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1571 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1573 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1575 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1576 larger than 32. Moved dsxx32 variants first for disassembler.
1578 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1580 * z8kgen.c, z8k-opc.h: Add full lda information.
1582 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1584 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1585 movb instructions. Any necessary space will be emitted by
1586 the code to handle nullification completers.
1588 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1590 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1592 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1594 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1595 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1597 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1599 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1601 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1603 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1604 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1606 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1608 * m88k-dis.c (m88kdis): comment change. Remove space after
1610 (printop): handle new arg types DEC and XREG for m88110.
1612 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1614 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1615 type for absolute branch addresses. Delete special
1616 "ble" and "be" code in 'W' operand code.
1618 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1620 * mips-opc.c: Set hazard information correctly for branch
1621 likely instructions.
1623 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1625 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1626 info->fprintf_func for printing and info->print_address_func for
1629 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1631 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1633 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1635 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1636 Corrected second case of "b" for disassembler.
1638 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1640 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1641 to BFD swapping routines to correspond to BFD name changes.
1643 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1645 * mips-opc.c: Change div machine instruction to be z,s,t rather
1646 than s,t. Change div macro to be d,v,t rather than d,s,t.
1647 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1648 rem and remu which generates only the corresponding div
1649 instruction. This is for compatibility with the MIPS assembler,
1650 which only generates the simple machine instruction when an
1651 explicit destination of $0 is used.
1652 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1654 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1656 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1657 WR_31 hazard for bal, bgezal, bltzal.
1659 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1661 * hppa-dis.c (print_insn_hppa): Use print function
1662 from within the disassemble_info, not fprintf_filtered.
1664 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1666 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1667 Law, law@cs.utah.edu.)
1669 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1671 * mips-opc.c ("absu"): Removed.
1674 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1676 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1677 Changed hazard information to distinguish between memory load
1678 delays and coprocessor load delays.
1680 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1682 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1684 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1686 * configure.in: Don't pass cpu to config.bfd.
1688 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1690 * m88k-dis.c (m88kdis): Make class unsigned.
1692 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1694 * alpha-dis.c (print_insn_alpha): One branch format case was
1695 missing the instruction name.
1697 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1699 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1700 Add the arch-specific auxiliary files.
1701 (OFILES): Remove the arch-specific auxiliary files
1702 and use BFD_MACHINES instead of DIS_LIBS.
1703 * configure.in: Set BFD_MACHINES based on --with-targets option.
1705 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1707 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1710 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1712 * sparc-opc.c: Change CONST to const to deal with gcc
1713 -Dconst=__const -traditional.
1715 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1717 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1718 coprocessor instructions out of #if 0, and made them use new
1721 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1723 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1725 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1727 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1728 instruction, for use by the disassembler.
1730 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1731 hand-coded sign extensions that depended on 32-bit host ints.
1732 FIXME, we still depend on big-endian host bitfield ordering.
1733 (sparc_print_insn): Set the insn_info_valid field, and the
1734 other fields that describe the instruction being printed.
1736 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1738 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1739 `jmp' instead of just one of them.
1741 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1743 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1744 (fput_fp_reg_r): Renamed from fput_reg_r.
1745 (fput_fp_reg): New function.
1746 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1748 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1750 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1752 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1754 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1756 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1757 don't output a space.
1759 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1761 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1763 * mips-opc.c: New file, containing opcode table from
1764 ../include/opcode/mips.h.
1765 * Makefile.in: Add it.
1767 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1769 * m88k-dis.c: New file, moved in from gdb and changed to use the
1770 new dis-asm.h disassembler interface.
1771 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1772 (m88k-dis.o): New target.
1774 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1776 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1777 argument string const char * to correspond to opcode/mips.h.
1779 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1781 * mips-dis.c: Updated to account for name changes in new version
1783 * Makefile.in: Added header file dependencies.
1785 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1787 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1789 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1791 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1792 extend, rather than shifts.
1794 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1796 * Makefile.in: Undo 15 June change.
1798 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1800 * m68k-dis.c (print_insn_arg): Change return value to byte count
1802 * m68k-dis.c: Re-write to detect invalid operands before
1803 printing anything, so we can handle this the same way we
1804 handle invalid opcodes.
1806 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1808 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1810 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1812 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1815 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1817 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1819 * configure.in: Do make sysdep.h link.
1820 * Makefile.in: Search ../include. Don't search ../bfd.
1822 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1824 Changes from Jeff Law, law@cs.utah.edu:
1825 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1826 Do not print a space before the completers specified by
1829 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1831 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1832 defined, since gdb has been fixed.
1834 Changes from Jeff Law, law@cs.utah.edu:
1835 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1836 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1837 be a *disassemble_info, not a *FILE.
1838 * hppa-dis.c: Support 'd', '!', and 'a'.
1839 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1840 * hppa-dis.c: Delete cases which are no longer needed.
1842 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1844 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1846 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1848 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1851 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1853 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1854 * configure.in: No longer need to configure to get sysdep.h.
1856 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1858 * Patches from Jeffrey Law <law@cs.utah.edu>.
1859 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1860 templates for 1.1 FP computational instructions.
1862 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1864 * h8500-dis.c (print_insn_h8500): Address argument is type
1866 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1869 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1870 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1872 * sparc-dis.c (compare_opcodes): Move static declaration to
1875 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1877 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1878 instruction, remove unimp hack from 'l' argument.
1880 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1882 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1885 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1887 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1888 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1891 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1893 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1894 arrays of string pointers to 2-d arrays of chars, to save
1897 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1899 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1900 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1902 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1904 * hppa-dis.c: New file from Utah, adapted to new disassembler
1906 * Makefile.in: Include it.
1908 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1910 * sh-dis.c, sh-opc.h: New files.
1912 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1914 * alpha-dis.c, alpha-opc.h: New files.
1916 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1918 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1921 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1923 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1925 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1927 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1930 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1932 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1933 and double percent signs a few places.
1935 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1937 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1938 Use info->print_address_func not print_address.
1940 * dis-buf.c (generic_print_address): New function.
1942 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1944 * Makefile.in: Add sparc-dis.c.
1945 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1947 Add `add' instruction to the set that get checked
1948 for a preceding `sethi' in order to print an absolute address.
1949 * (print_insn): Disassembly prefers real instructions.
1950 (is_delayed_branch): Speed up.
1951 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1952 Still missing some float ops, and needs testing.
1953 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1954 F_ALIAS. Use printf, not fprintf, when not passing a file
1956 (compare_opcodes): Check that identical instructions have
1957 identical opcodes, complain otherwise.
1960 * Include reg_names.
1962 Use dis-asm.h/read_memory_func interface.
1964 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1966 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1967 deliberately return non-zero to setjmp from longjmp. Otherwise
1968 this code fails to compile.
1970 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1972 * m68k-dis.c: Fix prototype for fetch_arg().
1974 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1976 * dis-buf.c: New file, for new read_memory_func interface.
1977 Makefile.in (OFILES): Include it.
1978 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1979 Use new read_memory_func interface.
1981 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1983 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1984 * h8500-opc.h: Fix couple of opcodes.
1986 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1988 * Makefile.in: add dvi & installcheck targets
1990 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1992 * Makefile.in: Update for h8500-dis.c.
1994 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1996 * h8500-dis.c, h8500-opc.h: New files
1998 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2000 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2001 ../include/dis-asm.h.
2002 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2003 and ../gdb/m68k-pinsn.c).
2004 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2005 and ../gdb/i386-pinsn.c).
2006 * m68881-ext.c: New file. Moved definition of
2007 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2008 * Makefile.in: Adjust for new files.
2009 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2010 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2011 can be dis-assembled.
2013 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2015 * mips-dis.c (print_insn_arg): Now returns void.
2017 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2019 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2020 files that use the macros.
2022 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2024 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2025 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2026 (CFILES): Added mips-dis.c.
2028 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2030 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2031 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2033 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2035 * Makefile.in: Improve *clean rules.
2036 * configure.in: Allow a default host.
2038 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2040 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2041 files include other sysdep files
2043 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2045 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2047 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2049 * configure.in: For host support, use ../bfd/configure.host
2050 so it stays in sync with the ../bfd/hosts database.
2052 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2054 * configure.in: use cpu-vendor-os triple instead of nested cases
2056 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2058 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2059 *always* the wrong one.
2061 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2063 * z8kgen.c: added copyright info
2065 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2067 * z8k-dis.c (unparse_instr): prettier tabs
2068 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2070 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2072 * configure.in: Add ncr* configuration.
2073 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2074 picayune ANSI compilers happy.
2076 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2078 * configure.in (i386): Make i386 and i486 synonymous for now.
2079 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2081 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2083 * Makefile.in (install): Fix typo.
2085 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2087 * Makefile.in (make): Remove obsolete crud.
2088 (sparc-opc.o): Avoid Sun Make VPATH bug.
2090 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2092 * Makefile.in: since there are no SUBDIRS, remove rule and
2093 references of subdir_do.
2095 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2097 * Makefile.in (install): Get the library name right here too.
2098 Don't install bfd.h, since it's unrelated to this library. No
2099 subdirs to recurse into, either.
2100 (CFILES): The source file has a .c suffix, not .o.
2102 * sparc-opc.c: New file, moved from BFD.
2103 * Makefile.in (OFILES): Build it.
2105 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2107 * z8k-dis.c: fixed forward refferences of some declarations.
2109 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2111 * Makefile.in: get the name of the library right
2113 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2115 * z8k-dis.c: knows how to disassemble z8k stuff
2116 * z8k-opc.h: new file full of z8000 opcodes
2120 version-control: never