1 2006-12-11 Daniel Jacobowitz <dan@codesourcery.com>
3 * po/Make-in (.po.gmo): Put gmo files in objdir.
5 2006-12-09 H.J. Lu <hongjiu.lu@intel.com>
7 * i386-dis.c (X86_64_1): New.
10 (dis386): Replace 0x60, 0x61 and 0x62 entries with x86-64
12 (x86_64_table): Add entries for 0x60, 0x61 and 0x62.
14 2006-12-09 H.J. Lu <hongjiu.lu@intel.com>
16 * i386-dis.c: Adjust white spaces.
18 2006-12-04 Jan Beulich <jbeulich@novell.com>
20 * i386-dis.c (OP_J): Update used_prefixes in v_mode.
22 2006-11-30 Jan Beulich <jbeulich@novell.com>
24 * i386-dis.c (SEG_Fixup): Delete.
26 (putop): New suffix character 'D'.
29 (OP_SEG): Handle bytemode other than w_mode.
31 2006-11-30 Jan Beulich <jbeulich@novell.com>
33 * i386-dis.c (zAX): New.
38 (putop): New suffix character 'G'.
39 (dis386): Use it for in, out, ins, and outs.
40 (intel_operand_size): Handle z_mode.
41 (OP_REG): Delete unreachable case indir_dx_reg.
42 (OP_IMREG): Fix Intel syntax output for case indir_dx_reg. Handle
44 (OP_ESreg): Fix Intel syntax operand size handling.
47 2006-11-30 Jan Beulich <jbeulich@novell.com>
49 * i386-dis.c (dis386): Use 'R' and 'O' for cbw/cwd unconditionally.
50 (putop): For 'O' suffix, print 'q' in Intel mode, and mark data prefix
51 used. For 'R' and 'W' suffix, simplify and fix Intel mode.
53 2006-11-29 Paul Brook <paul@codesourcery.com>
55 * arm-dis.c (coprocessor_opcodes): Fix bitfields for fconstd/fconstd.
57 2006-11-22 Daniel Jacobowitz <dan@codesourcery.com>
59 * arm-dis.c (last_is_thumb): Delete.
60 (enum map_type, last_type): New.
61 (print_insn_data): New.
62 (get_sym_code_type): Take MAP_TYPE argument. Check the type of
63 the right symbol. Handle $d.
64 (print_insn): Check for mapping symbols even without a normal
65 symbol. Adjust searching. If $d is found see how much data
66 to print. Handle data.
68 2006-11-16 Nathan Sidwell <nathan@codesourcery.com>
70 * m68k-opc.c (m68k_opcodes): Place trap instructions before set
71 conditionals. Add tpf coldfire instruction as alias for trapf.
73 2006-11-09 H.J. Lu <hongjiu.lu@intel.com>
75 * i386-dis.c (print_insn): Check PREFIX_REPNZ before
76 PREFIX_DATA when prefix user table is used.
78 2006-11-09 H.J. Lu <hongjiu.lu@intel.com>
80 * i386-dis.c (twobyte_uses_SSE_prefix): Renamed to ...
81 (twobyte_uses_DATA_prefix): This.
82 (twobyte_uses_REPNZ_prefix): New.
83 (twobyte_uses_REPZ_prefix): Likewise.
84 (threebyte_0x38_uses_DATA_prefix): Likewise.
85 (threebyte_0x38_uses_REPNZ_prefix): Likewise.
86 (threebyte_0x38_uses_REPZ_prefix): Likewise.
87 (threebyte_0x3a_uses_DATA_prefix): Likewise.
88 (threebyte_0x3a_uses_REPNZ_prefix): Likewise.
89 (threebyte_0x3a_uses_REPZ_prefix): Likewise.
90 (print_insn): Updated checking usages of DATA/REPNZ/REPZ
93 2006-11-06 Troy Rollo <troy@corvu.com.au>
95 * ppc-opc.c: Restore COM to mfcr wrongly removed 2003-07-04.
97 2006-11-01 Mei Ligang <ligang@sunnorth.com.cn>
99 * score-opc.h (score_opcodes): Delete modifier '0x'.
101 2006-10-30 Paul Brook <paul@codesourcery.com>
103 * arm-dis.c (last_is_thumb, last_mapping_sym, last_mapping_addr): New.
104 (get_sym_code_type): New function.
105 (print_insn): Search for mapping symbols.
107 2006-10-31 Mei Ligang <ligang@sunnorth.com.cn>
109 * score-dis.c (print_insn): Correct the error code to print
110 correct PCE instruction disassembly.
112 2006-10-26 Ben Elliston <bje@au.ibm.com>
113 Anton Blanchard <anton@samba.org>
114 Peter Bergner <bergner@vnet.ibm.com>
116 * ppc-opc.c (A_L, DCM, DGM, TE, RMC, R, SP, S, SH16, XRT_L, EH,
117 AFRALFRC_MASK, Z, ZRC, Z_MASK, XLRT_MASK, XEH_MASK): Define.
119 (powerpc_opcodes): Extend "lwarx", "ldarx", "dcbf", "fres", "fres.",
120 "frsqrtes", "frsqrtes." "fre", "fre.", "frsqrte" and "frsqrte.".
121 Add "doze", "nap", "sleep", "rvwinkle", "dcbfl", "prtyw", "prtyd",
122 "mfcfar", "cmpb", "lfdpx", "stfdpx", "mtcfar", "mffgpr", "mftgpr",
123 "lwzcix", "lhzcix", "lbzcix", "ldcix", "lfiwax", "stwcix", "sthcix",
124 "stbcix", "stdcix", "lfdp", "dadd", "dadd.", "dqua", "dqua.", "dmul",
125 "dmul.", "drrnd", "drrnd.", "dscli", "dscli.", "dquai", "dquai.",
126 "dscri", "dscri.", "drintx", "drintx.", "dcmpo", "dtstex", "dtstdc",
127 "dtstdg", "dtstsf", "drintn", "drintn.", "dctdp", "dctdp.", "dctfix",
128 "dctfix.", "ddedpd", "ddedpd.", "dxex", "dxex.", "dsub", "dsub.",
129 "ddiv", "ddiv.", "dcmpu", "drsp", "drsp.", "dcffix", "dcffix.",
130 "denbcd", "denbcd.", "diex", "diex.", "stfdp", "daddq", "daddq.",
131 "dquaq", "dquaq.", "fcpsgn", "fcpsgn.", "dmulq", "dmulq.",
132 "drrndq", "drrndq.", "dscliq", "dscliq.", "dquaiq", "dquaiq.",
133 "dscriq", "dscriq.", "drintxq", "drintxq.", "dcmpoq", "dtstexq",
134 "dtstdcq", "dtstdgq", "dtstsfq", "drintnq", "drintnq.",
135 "dctqpq", "dctqpq.", "dctfixq", "dctfixq.", "ddedpdq", "ddedpdq.",
136 "dxexq", "dxexq.", "dsubq", "dsubq.", "ddivq", "ddivq.", "dcmpuq",
137 "drdpq", "drdpq.", "dcffixq", "dcffixq.", "denbcdq", "denbcdq.",
138 "diexq" and "diexq." opcodes.
140 2006-10-26 Daniel Jacobowitz <dan@codesourcery.com>
142 * h8300-dis.c (bfd_h8_disassemble): Add missing consts.
144 2006-10-25 Trevor Smigiel <Trevor_Smigiel@playstation.sony.com>
145 Yukishige Shibata <shibata@rd.scei.sony.co.jp>
146 Nobuhisa Fujinami <fnami@rd.scei.sony.co.jp>
147 Takeaki Fukuoka <fukuoka@rd.scei.sony.co.jp>
148 Alan Modra <amodra@bigpond.net.au>
150 * spu-dis.c: New file.
151 * spu-opc.c: New file.
152 * configure.in: Add SPU support.
153 * disassemble.c: Likewise.
154 * Makefile.am: Likewise. Run "make dep-am".
155 * Makefile.in: Regenerate.
156 * configure: Regenerate.
157 * po/POTFILES.in: Regenerate.
159 2006-10-24 Andrew Pinski <andrew_pinski@playstation.sony.com>
161 * ppc-opc.c (CELL): New define.
162 (powerpc_opcodes): Enable hrfid for Cell. Add ldbrx and stdbrx,
163 cell specific instructions. Add {st,l}x{r,l}{,l} cell specific
165 * ppc-dis.c (powerpc_dialect): Handle cell.
167 2006-10-23 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
169 * i386-dis.c (dis386): Add support for the change in POPCNT opcode in
170 amdfam10 architecture.
172 (print_insn): Disallow REP prefix for POPCNT.
174 2006-10-20 Andrew Stubbs <andrew.stubbs@st.com>
176 * sh-dis.c (print_insn_sh): Remove 0x from output to prevent GDB
179 2006-10-18 Dave Brolley <brolley@redhat.com>
181 * configure.in (BFD_MACHINES): Add cgen-bitset.lo for bfd_sh_arch.
182 * configure: Regenerated.
184 2006-09-29 Alan Modra <amodra@bigpond.net.au>
186 * po/POTFILES.in: Regenerate.
188 2006-09-26 Mark Shinwell <shinwell@codesourcery.com>
189 Joseph Myers <joseph@codesourcery.com>
190 Ian Lance Taylor <ian@wasabisystems.com>
191 Ben Elliston <bje@wasabisystems.com>
193 * arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
194 only be used with the default multiply-add operation, so if N is
195 set, don't bother printing X. Add new iwmmxt instructions.
196 (IWMMXT_INSN_COUNT): Update.
197 (iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
199 (print_insn_coprocessor): Check for iWMMXt2. Handle format
202 2006-09-24 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
205 * i386-dis.c (prefix_user_table): Fix the second operand of
206 maskmovdqu instruction to allow only %xmm register instead of
207 both %xmm register and memory.
209 2006-09-23 H.J. Lu <hongjiu.lu@intel.com>
212 * i386-dis.c (OP_OFF64): Get 32bit offset if there is an
215 2006-09-17 Mei Ligang <ligang@sunnorth.com.cn>
217 * score-dis.c: New file.
218 * score-opc.h: New file.
219 * Makefile.am: Add Score files.
220 * Makefile.in: Regenerate.
221 * configure.in: Add support for Score target.
222 * configure: Regenerate.
223 * disassemble.c: Add support for Score target.
225 2006-09-16 Nick Clifton <nickc@redhat.com>
226 Pedro Alves <pedro_alves@portugalmail.pt>
228 * arm-dis.c: Make use of new STRING_COMMA_LEN and CONST_STRNEQ
229 macros defined in bfd.h.
230 * cris-dis.c: Likewise.
231 * h8300-dis.c: Likewise.
232 * i386-dis.c: Likewise.
233 * ia64-gen.c: Likewise.
234 * mips-dis: Likewise.
236 2006-09-04 Paul Brook <paul@codesourcery.com>
238 * arm-dis.c (neon_opcode): Fix suffix on VMOVN.
240 2006-08-23 H.J. Lu <hongjiu.lu@intel.com>
242 * i386-dis.c (three_byte_table): Expand to 256 elements.
244 2006-08-04 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
247 * i386-dis.c (MXC,EMC): Define.
248 (OP_MXC): New function to handle cvt* (convert instructions) between
249 %xmm and %mm register correctly.
251 (prefix_user_table): Modified cvtpi2pd,cvtpd2pi and cvttpd2pi
252 instruction operands in PREGRP2,PREGRP3,PREGRP4 appropriately
255 2006-07-29 Richard Sandiford <richard@codesourcery.com>
257 * m68k-opc.c (m68k_opcodes): Fix operand specificer in the Coldfire
260 2006-07-19 Paul Brook <paul@codesourcery.com>
262 * armd-dis.c (arm_opcodes): Fix rbit opcode.
264 2006-07-18 H.J. Lu <hongjiu.lu@intel.com>
266 * i386-dis.c (grps): Change "sldtQ", "strQ" and "smswQ" to
267 "sldt", "str" and "smsw".
269 2006-07-15 H.J. Lu <hongjiu.lu@intel.com>
272 * i386-dis.c (GRP11_C6): NEW.
273 (GRP11_C7): Likewise.
280 (GRPPADLCK1): Likewise.
281 (GRPPADLCK2): Likewise.
282 (dis386): Use GRP11_C6 and GRP11_C7 for entres 0xc6 and 0xc7,
284 (grps): Add entries for GRP11_C6 and GRP11_C7.
286 2006-07-10 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
287 Michael Meissner <michael.meissner@amd.com>
289 * i386-dis.c (dis386): Add support for 4 operand instructions. Add
290 support for amdfam10 SSE4a/ABM instructions. Modify all
291 initializer macros to have additional arguments. Disallow REP
292 prefix for non-string instructions.
295 2006-07-05 Julian Brown <julian@codesourcery.com>
297 * arm-dis.c (coprocessor): Alter fmsrr disassembly syntax.
299 2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
301 * i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
302 (twobyte_has_modrm): Set 1 for 0x1f.
304 2006-06-12 H.J. Lu <hongjiu.lu@intel.com>
306 * i386-dis.c (NOP_Fixup): Removed.
308 (NOP_Fixup2): Likewise.
309 (dis386): Use NOP_Fixup1 and NOP_Fixup2 on 0x90.
311 2006-06-12 Julian Brown <julian@codesourcery.com>
313 * arm-dis.c (print_insn_neon): Disassemble 32-bit immediates as signed
316 2006-06-10 H.J. Lu <hongjiu.lu@intel.com>
318 * i386.c (GRP10): Renamed to ...
320 (GRP11): Renamed to ...
322 (GRP12): Renamed to ...
324 (GRP13): Renamed to ...
326 (GRP14): Renamed to ...
328 (dis386_twobyte): Updated.
331 2006-06-09 Nick Clifton <nickc@redhat.com>
333 * po/fi.po: Updated Finnish translation.
335 2006-06-07 Joseph S. Myers <joseph@codesourcery.com>
337 * po/Make-in (pdf, ps): New dummy targets.
339 2006-06-06 Paul Brook <paul@codesourcery.com>
341 * arm-dis.c (coprocessor_opcodes): Add %c to unconditional arm
343 (neon_opcodes): Add conditional execution specifiers.
344 (thumb_opcodes): Ditto.
345 (thumb32_opcodes): Ditto.
346 (arm_conditional): Change 0xe to "al" and add "" to end.
347 (ifthen_state, ifthen_next_state, ifthen_address): New.
348 (IFTHEN_COND): Define.
349 (print_insn_coprocessor, print_insn_neon): Print thumb conditions.
350 (print_insn_arm): Change %c to use new values of arm_conditional.
351 (print_insn_thumb16): Print thumb conditions. Add %I.
352 (print_insn_thumb32): Print thumb conditions.
353 (find_ifthen_state): New function.
354 (print_insn): Track IT block state.
356 2006-06-06 Ben Elliston <bje@au.ibm.com>
357 Anton Blanchard <anton@samba.org>
358 Peter Bergner <bergner@vnet.ibm.com>
360 * ppc-dis.c (powerpc_dialect): Handle power6 option.
361 (print_ppc_disassembler_options): Mention power6.
363 2006-06-06 Thiemo Seufer <ths@mips.com>
364 Chao-ying Fu <fu@mips.com>
366 * mips-dis.c: Disassemble DSP64 instructions for MIPS64R2.
367 * mips-opc.c: Add DSP64 instructions.
369 2006-06-06 Alan Modra <amodra@bigpond.net.au>
371 * m68hc11-dis.c (print_insn): Warning fix.
373 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
375 * po/Make-in (top_builddir): Define.
377 2006-06-05 Alan Modra <amodra@bigpond.net.au>
379 * Makefile.am: Run "make dep-am".
380 * Makefile.in: Regenerate.
381 * config.in: Regenerate.
383 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
385 * Makefile.am (INCLUDES): Use @INCINTL@.
386 * acinclude.m4: Include new gettext macros.
387 * configure.in: Use ZW_GNU_GETTEXT_SISTER_DIR and AM_PO_SUBDIRS.
388 Remove local code for po/Makefile.
389 * Makefile.in, aclocal.m4, configure: Regenerated.
391 2006-05-30 Nick Clifton <nickc@redhat.com>
393 * po/es.po: Updated Spanish translation.
395 2006-05-25 Richard Sandiford <richard@codesourcery.com>
397 * m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
398 and fmovem entries. Put register list entries before immediate
399 mask entries. Use "l" rather than "L" in the fmovem entries.
400 * m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
402 (m68k_scan_mask): New function, split out from...
403 (print_insn_m68k): ...here. If no architecture has been set,
404 first try printing an m680x0 instruction, then try a Coldfire one.
406 2006-05-24 Nick Clifton <nickc@redhat.com>
408 * po/ga.po: Updated Irish translation.
410 2006-05-22 Nick Clifton <nickc@redhat.com>
412 * crx-dis.c (EXTRACT): Make macro work on 64-bit hosts.
414 2006-05-22 Nick Clifton <nickc@redhat.com>
416 * po/nl.po: Updated translation.
418 2006-05-18 Alan Modra <amodra@bigpond.net.au>
420 * avr-dis.c: Formatting fix.
422 2006-05-14 Thiemo Seufer <ths@mips.com>
424 * mips16-opc.c (I1, I32, I64): New shortcut defines.
425 (mips16_opcodes): Change membership of instructions to their
428 2006-05-09 H.J. Lu <hongjiu.lu@intel.com>
430 * i386-dis.c (grps): Update sgdt/sidt for 64bit.
432 2006-05-05 Julian Brown <julian@codesourcery.com>
434 * arm-dis.c (coprocessor_opcodes): Don't interpret fldmx/fstmx as
437 2006-05-05 Thiemo Seufer <ths@mips.com>
438 David Ung <davidu@mips.com>
440 * mips-opc.c: Add macro for cache instruction.
442 2006-05-04 Thiemo Seufer <ths@mips.com>
443 Nigel Stephens <nigel@mips.com>
444 David Ung <davidu@mips.com>
446 * mips-dis.c (mips_arch_choices): Add smartmips instruction
447 decoding to MIPS32 and MIPS32R2. Limit DSP decoding to release
448 2 ISAs. Add MIPS3D decoding to MIPS32R2. Add MT decoding to
450 * mips-opc.c: fix random typos in comments.
451 (INSN_SMARTMIPS): New defines.
452 (mips_builtin_opcodes): Add paired single support for MIPS32R2.
453 Move bc3f, bc3fl, bc3t, bc3tl downwards. Move flushi, flushd,
454 flushid, wb upwards. Move cfc3, ctc3 downwards. Rework the
455 FP_S and FP_D flags to denote single and double register
456 accesses separately. Move dmfc3, dmtc3, mfc3, mtc3 downwards.
457 Allow jr.hb and jalr.hb for release 1 ISAs. Allow luxc1, suxc1
458 for MIPS32R2. Add SmartMIPS instructions. Add two-argument
459 variants of bc2f, bc2fl, bc2t, bc2tl. Add mfhc2, mthc2 to
461 * mips16-opc.c (mips16_opcodes): Add sdbbp instruction.
463 2006-05-03 Thiemo Seufer <ths@mips.com>
465 * mips-opc.c (mips_builtin_opcodes): Fix mftr argument order.
467 2006-05-02 Thiemo Seufer <ths@mips.com>
468 Nigel Stephens <nigel@mips.com>
469 David Ung <davidu@mips.com>
471 * mips-dis.c (print_insn_args): Force mips16 to odd addresses.
472 (print_mips16_insn_arg): Force mips16 to odd addresses.
474 2006-04-30 Thiemo Seufer <ths@mips.com>
475 David Ung <davidu@mips.com>
477 * mips-opc.c (mips_builtin_opcodes): Add udi instructions
479 * mips-dis.c (print_insn_args): Adds udi argument handling.
481 2006-04-28 James E Wilson <wilson@specifix.com>
483 * m68k-dis.c (match_insn_m68k): Restore fprintf_func before printing
486 2006-04-28 Thiemo Seufer <ths@mips.com>
487 David Ung <davidu@mips.com>
488 Nigel Stephens <nigel@mips.com>
490 * mips-dis.c (mips_cp0sel_names_mips3264r2): Add MT register
493 2006-04-28 Thiemo Seufer <ths@mips.com>
494 Nigel Stephens <nigel@mips.com>
495 David Ung <davidu@mips.com>
497 * mips-dis.c (print_insn_args): Add mips_opcode argument.
498 (print_insn_mips): Adjust print_insn_args call.
500 2006-04-28 Thiemo Seufer <ths@mips.com>
501 Nigel Stephens <nigel@mips.com>
503 * mips-dis.c (print_insn_args): Print $fcc only for FP
504 instructions, use $cc elsewise.
506 2006-04-28 Thiemo Seufer <ths@mips.com>
507 Nigel Stephens <nigel@mips.com>
509 * opcodes/mips-dis.c (mips16_to_32_reg_map, mips16_reg_names):
510 Map MIPS16 registers to O32 names.
511 (print_mips16_insn_arg): Use mips16_reg_names.
513 2006-04-26 Julian Brown <julian@codesourcery.com>
515 * arm-dis.c (print_insn_neon): Disassemble floating-point constant
518 2006-04-26 Nathan Sidwell <nathan@codesourcery.com>
519 Julian Brown <julian@codesourcery.com>
521 * opcodes/arm-dis.c (coprocessor_opcodes): Add %A, %B, %k, convert
522 %<code>[zy] into %[zy]<code>. Expand meaning of %<bitfield>['`?].
523 Add unified load/store instruction names.
524 (neon_opcode_table): New.
525 (arm_opcodes): Expand meaning of %<bitfield>['`?].
526 (arm_decode_bitfield): New.
527 (print_insn_coprocessor): Add pc argument. Add %A & %B specifiers.
528 Use arm_decode_bitfield and adjust numeric specifiers. Adjust %z & %y.
529 (print_insn_neon): New.
530 (print_insn_arm): Adjust print_insn_coprocessor call. Call
531 print_insn_neon. Use arm_decode_bitfield and adjust numeric specifiers.
532 (print_insn_thumb32): Likewise.
534 2006-04-19 Alan Modra <amodra@bigpond.net.au>
536 * Makefile.am: Run "make dep-am".
537 * Makefile.in: Regenerate.
539 2006-04-19 Alan Modra <amodra@bigpond.net.au>
541 * avr-dis.c (avr_operand): Warning fix.
543 * configure: Regenerate.
545 2006-04-16 Daniel Jacobowitz <dan@codesourcery.com>
547 * po/POTFILES.in: Regenerated.
549 2006-04-12 Hochstein <hochstein@algo.informatik.tu-darmstadt.de>
552 * avr-dis.c (avr_operand): Arrange for a comment to appear before
553 the symolic form of an address, so that the output of objdump -d
556 2006-04-10 DJ Delorie <dj@redhat.com>
558 * m32c-asm.c: Regenerate.
560 2006-04-06 Carlos O'Donell <carlos@codesourcery.com>
562 * Makefile.am: Add install-html target.
563 * Makefile.in: Regenerate.
565 2006-04-06 Nick Clifton <nickc@redhat.com>
567 * po/vi/po: Updated Vietnamese translation.
569 2006-03-31 Paul Koning <ni1d@arrl.net>
571 * pdp11-opc.c (pdp11_opcodes): Fix opcode for SEC instruction.
573 2006-03-16 Bernd Schmidt <bernd.schmidt@analog.com>
575 * bfin-dis.c (decode_dsp32shiftimm_0): Simplify and correct the
576 logic to identify halfword shifts.
578 2006-03-16 Paul Brook <paul@codesourcery.com>
580 * arm-dis.c (arm_opcodes): Rename swi to svc.
581 (thumb_opcodes): Ditto.
583 2006-03-13 DJ Delorie <dj@redhat.com>
585 * m32c-asm.c: Regenerate.
586 * m32c-desc.c: Likewise.
587 * m32c-desc.h: Likewise.
588 * m32c-dis.c: Likewise.
589 * m32c-ibld.c: Likewise.
590 * m32c-opc.c: Likewise.
591 * m32c-opc.h: Likewise.
593 2006-03-10 DJ Delorie <dj@redhat.com>
595 * m32c-desc.c: Regenerate with mul.l, mulu.l.
596 * m32c-opc.c: Likewise.
597 * m32c-opc.h: Likewise.
600 2006-03-09 Nick Clifton <nickc@redhat.com>
602 * po/sv.po: Updated Swedish translation.
604 2006-03-07 H.J. Lu <hongjiu.lu@intel.com>
607 * i386-dis.c (REP_Fixup): New function.
608 (AL): Remove duplicate.
613 (indirDXr): Likewise.
616 (dis386): Updated entries of ins, outs, movs, lods and stos.
618 2006-03-05 Nick Clifton <nickc@redhat.com>
620 * cgen-ibld.in (insert_normal): Cope with attempts to insert a
621 signed 32-bit value into an unsigned 32-bit field when the host is
623 * fr30-ibld.c: Regenerate.
624 * frv-ibld.c: Regenerate.
625 * ip2k-ibld.c: Regenerate.
626 * iq2000-asm.c: Regenerate.
627 * iq2000-ibld.c: Regenerate.
628 * m32c-ibld.c: Regenerate.
629 * m32r-ibld.c: Regenerate.
630 * openrisc-ibld.c: Regenerate.
631 * xc16x-ibld.c: Regenerate.
632 * xstormy16-ibld.c: Regenerate.
634 2006-03-03 Shrirang Khisti <shrirangk@kpitcummins.com)
636 * xc16x-asm.c: Regenerate.
637 * xc16x-dis.c: Regenerate.
639 2006-02-27 Carlos O'Donell <carlos@codesourcery.com>
641 * po/Make-in: Add html target.
643 2006-02-27 H.J. Lu <hongjiu.lu@intel.com>
645 * i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
646 Intel Merom New Instructions.
647 (THREE_BYTE_0): Likewise.
648 (THREE_BYTE_1): Likewise.
649 (three_byte_table): Likewise.
650 (dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
651 THREE_BYTE_1 for entry 0x3a.
652 (twobyte_has_modrm): Updated.
653 (twobyte_uses_SSE_prefix): Likewise.
654 (print_insn): Handle 3-byte opcodes used by Intel Merom New
657 2006-02-24 David S. Miller <davem@sunset.davemloft.net>
659 * sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
660 (v9_hpriv_reg_names): New table.
661 (print_insn_sparc): Allow values up to 16 for '?' and '!'.
662 New cases '$' and '%' for read/write hyperprivileged register.
663 * sparc-opc.c (sparc_opcodes): Add new entries for UA2005
664 window handling and rdhpr/wrhpr instructions.
666 2006-02-24 DJ Delorie <dj@redhat.com>
668 * m32c-desc.c: Regenerate with linker relaxation attributes.
669 * m32c-desc.h: Likewise.
670 * m32c-dis.c: Likewise.
671 * m32c-opc.c: Likewise.
673 2006-02-24 Paul Brook <paul@codesourcery.com>
675 * arm-dis.c (arm_opcodes): Add V7 instructions.
676 (thumb32_opcodes): Ditto. Handle V7M MSR/MRS variants.
677 (print_arm_address): New function.
678 (print_insn_arm): Use it. Add 'P' and 'U' cases.
679 (psr_name): New function.
680 (print_insn_thumb32): Add 'U', 'C' and 'D' cases.
682 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
684 * ia64-opc-i.c (bXc): New.
686 (OpX2TaTbYaXcC): Likewise.
689 (ia64_opcodes_i): Add instructions for tf.
691 * ia64-opc.h (IMMU5b): New.
693 * ia64-asmtab.c: Regenerated.
695 2006-02-23 H.J. Lu <hongjiu.lu@intel.com>
697 * ia64-gen.c: Update copyright years.
698 * ia64-opc-b.c: Likewise.
700 2006-02-22 H.J. Lu <hongjiu.lu@intel.com>
702 * ia64-gen.c (lookup_regindex): Handle ".vm".
703 (print_dependency_table): Handle '\"'.
705 * ia64-ic.tbl: Updated from SDM 2.2.
706 * ia64-raw.tbl: Likewise.
707 * ia64-waw.tbl: Likewise.
708 * ia64-asmtab.c: Regenerated.
710 * ia64-opc-b.c (ia64_opcodes_b): Add vmsw.0 and vmsw.1.
712 2006-02-17 Shrirang Khisti <shrirangk@kpitcummins.com>
713 Anil Paranjape <anilp1@kpitcummins.com>
714 Shilin Shakti <shilins@kpitcummins.com>
716 * xc16x-desc.h: New file
717 * xc16x-desc.c: New file
718 * xc16x-opc.h: New file
719 * xc16x-opc.c: New file
720 * xc16x-ibld.c: New file
721 * xc16x-asm.c: New file
722 * xc16x-dis.c: New file
723 * Makefile.am: Entries for xc16x
724 * Makefile.in: Regenerate
725 * cofigure.in: Add xc16x target information.
726 * configure: Regenerate.
727 * disassemble.c: Add xc16x target information.
729 2006-02-11 H.J. Lu <hongjiu.lu@intel.com>
731 * i386-dis.c (dis386_twobyte): Use "movZ" for debug register
734 2006-02-11 H.J. Lu <hongjiu.lu@intel.com>
736 * i386-dis.c ('Z'): Add a new macro.
737 (dis386_twobyte): Use "movZ" for control register moves.
739 2006-02-10 Nick Clifton <nickc@redhat.com>
741 * iq2000-asm.c: Regenerate.
743 2006-02-07 Nathan Sidwell <nathan@codesourcery.com>
745 * m68k-dis.c (print_insn_m68k): Use bfd_m68k_mach_to_features.
747 2006-01-26 David Ung <davidu@mips.com>
749 * mips-opc.c: Add I33 masks to these MIPS32R2 instructions: prefx,
750 ceil.l.d, ceil.l.s, cvt.d.l, cvt.l.d, cvt.l.s, cvt.s.l, floor.l.d,
751 floor.l.s, ldxc1, lwxc1, madd.d, madd.s, msub.d, msub.s, nmadd.d,
752 nmadd.s, nmsub.d, nmsub.s, recip.d, recip.s, round.l.d, rsqrt.d,
753 rsqrt.s, sdxc1, swxc1, trunc.l.d, trunc.l.s.
755 2006-01-18 Arnold Metselaar <arnoldm@sourceware.org>
757 * z80-dis.c (struct buffer, prt_d, prt_d_n, arit_d, ld_r_d,
758 ld_d_r, pref_xd_cb): Use signed char to hold data to be
760 * z80-dis.c (TXTSIZ): Increase buffer size to 24, this fixes
761 buffer overflows when disassembling instructions like
763 * z80-dis.c (opc_ind, pref_xd_cb): Suppress '+' in an indexed
764 operand, if the offset is negative.
766 2006-01-17 Arnold Metselaar <arnoldm@sourceware.org>
768 * z80-dis.c (struct buffer, prt_d, prt_d_n, pref_xd_cb): Use
769 unsigned char to hold data to be disassembled.
771 2006-01-17 Andreas Schwab <schwab@suse.de>
774 * disassemble.c (disassemble_init_for_target): Set
775 disassembler_needs_relocs for bfd_arch_arm.
777 2006-01-16 Paul Brook <paul@codesourcery.com>
779 * m68k-opc.c (m68k_opcodes): Fix opcodes for ColdFire f?abss,
780 f?add?, and f?sub? instructions.
782 2006-01-16 Nick Clifton <nickc@redhat.com>
784 * po/zh_CN.po: New Chinese (simplified) translation.
785 * configure.in (ALL_LINGUAS): Add "zh_CH".
786 * configure: Regenerate.
788 2006-01-05 Paul Brook <paul@codesourcery.com>
790 * m68k-opc.c (m68k_opcodes): Add missing ColdFire fdsqrtd entry.
792 2006-01-06 DJ Delorie <dj@redhat.com>
794 * m32c-desc.c: Regenerate.
795 * m32c-opc.c: Regenerate.
796 * m32c-opc.h: Regenerate.
798 2006-01-03 DJ Delorie <dj@redhat.com>
800 * cgen-ibld.in (extract_normal): Avoid memory range errors.
801 * m32c-ibld.c: Regenerated.
803 For older changes see ChangeLog-2005
809 version-control: never