1 2002-05-25 Alan Modra <amodra@bigpond.net.au>
3 * Makefile.am (sh-dis.lo): Don't put make commands in deps.
4 * Makefile.in: Regenerate.
5 * arc-dis.c: Use #include "" instead of <> for local header files.
6 * m68k-dis.c: Likewise.
8 Wed May 22 20:11:51 2002 J"orn Rennecke <joern.rennecke@superh.com>
10 * Makefile.am (sh-dis.lo): Compile with @archdefs@.
11 * Makefile.in: regenerate.
13 * sh-dis.c (print_insn_sh): If coff and bfd_mach_sh, use arch_sh4
16 2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
18 * mips-opc.c (mips_builtin_opcodes): Add drol, dror macros.
20 Fri May 17 14:26:44 2002 J"orn Rennecke <joern.rennecke@superh.com>
22 * disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
23 * sh-dis.c (LITTLE_BIT): Delete.
24 (print_insn_sh, print_insn_shl): Deleted.
25 (print_insn_shx): Renamed to
26 (print_insn_sh). No longer static. Handle SHmedia instructions.
27 Use info->endian to determine endianness.
28 * sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
29 (print_insn_sh64x): No longer static. Renamed to
30 (print_insn_sh64). Removed pfun_compact and endian arguments.
31 If we got an uneven address to indicate SHmedia, adjust it.
32 Return -2 for SHcompact instructions.
34 2002-05-17 Alan Modra <amodra@bigpond.net.au>
36 * acinclude.m4 (AM_INSTALL_LIBBFD): Fake to fool autotools.
37 * configure.in: Invoke AM_INSTALL_LIBBFD.
38 * Makefile.am (install-data-local): Move to..
39 (install_libopcodes): .. New target.
40 (uninstall_libopcodes): Likewise.
41 (install-bfdlibLTLIBRARIES): Likewise.
42 (uninstall-bfdlibLTLIBRARIES): Likewise.
45 (lib_LTLIBRARIES): Rename to bfdlib_LTLIBRARIES.
46 * aclocal.m4: Regenerate.
47 * configure: Regenerate.
48 * Makefile.in: Regenerate.
50 2002-05-15 Nick Clifton <nickc@cambridge.redhat.com>
52 * fr30-asm.c: Regenerate.
53 * fr30-desc.c: Regenerate.
54 * fr30-dis.c: Regenerate.
55 * m32r-asm.c: Regenerate.
56 * m32r-desc.c: Regenerate.
57 * m32r-dis.c: Regenerate.
58 * openrisc-asm.c: Regenerate.
59 * openrisc-desc.c: Regenerate.
60 * openrisc-dis.c: Regenerate.
61 * xstormy16-asm.c: Regenerate.
62 * xstormy16-desc.c: Regenerate.
63 * xstormy16-dis.c: Regenerate.
65 2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
67 * mips-dis.c (is_newabi): EABI is not a NewABI.
69 2002-05-13 Jason Thorpe <thorpej@wasabisystems.com>
71 * configure.in (shle-*-*elf*): Include sh64 support.
72 * configure: Regenerate.
74 2002-04-28 Jason Thorpe <thorpej@wasabisystems.com>
76 * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
77 (print_insn_mode): Print some basic info about floating point values.
79 2002-05-09 Anton Blanchard <anton@samba.org>
81 * ppc-opc.c: Add "tlbiel" for POWER4.
83 2002-05-07 Graydon Hoare <graydon@redhat.com>
85 * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
86 than just most-recently-opened.
88 2002-05-01 Alan Modra <amodra@bigpond.net.au>
90 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
92 2002-04-24 Christian Groessler <chris@groessler.org>
94 * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
95 bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
97 (z8k_lookup_instr): CLASS_IGNORE case added.
98 (output_instr): Don't print hex codes, they are already
100 (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case
101 fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
102 (unparse_instr): Fix base and indexed addressing disassembly:
103 The index is inside the brackets.
104 * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
105 (opt): Fix shift left/right arithmetic/logical byte defines:
106 The high byte of the immediate word is ignored by the
108 Fix n parameter of ldm opcodes: The opcode contains (n-1).
109 (args): Fix "n" entry.
110 (toks): Add "nim4" and "iiii" entries.
111 * z8k-opc.h: Regenerated with new z8kgen.c.
113 2002-04-24 Nick Clifton <nickc@cambridge.redhat.com>
115 * po/id.po: New Indonesian translation.
116 * configure.in (ALL_LIGUAS): Add id.po
117 * configure: Regenerate.
119 2002-04-17 matthew green <mrg@redhat.com>
121 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
123 2002-04-04 Alan Modra <amodra@bigpond.net.au>
125 * dep-in.sed: Cope with absolute paths.
126 * Makefile.am (dep.sed): Subst TOPDIR.
128 * Makefile.in: Regenerate.
129 * ppc-opc.c: Whitespace.
130 * s390-dis.c: Fix copyright date.
132 2002-03-23 matthew green <mrg@redhat.com>
134 * ppc-opc.c (vmaddfp): Fix operand order.
136 2002-03-21 Alan Modra <amodra@bigpond.net.au>
138 * Makefile.am: Run "make dep-am".
139 * Makefile.in: Regenerate.
141 2002-03-21 Anton Blanchard <anton@samba.org>
143 * ppc-opc.c: Add optional field to mtmsrd.
144 (MTMSRD_L, XRLARB_MASK): Define.
146 Mon Mar 18 21:10:43 CET 2002 Jan Hubicka <jh@suse.cz>
148 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
150 (print_insn) Likewise.
151 (putop): Fix handling of 'E'
152 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
155 2002-03-18 Nick Clifton <nickc@cambridge.redhat.com>
157 * po/fr.po: Updated version.
159 2002-03-16 Chris Demetriou <cgd@broadcom.com>
161 * mips-opc.c (M3D): Tweak comment.
162 (mips_builtin_op): Add comment indicating that opcodes of the
163 same name must be placed together in the table, and sort
164 the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
165 "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
167 2002-03-16 Nick Clifton <nickc@cambridge.redhat.com>
169 * Makefile.am: Tidy up sh64 rules.
170 * Makefile.in: Regenerate.
172 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
174 * mips-dis.c: Update copyright years.
176 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
178 * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
179 bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
180 comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
181 indicate that they should dissassemble all applicable
183 * mips-opc.c: Add support for MIPS-3D instructions.
184 (M3D): New definition.
186 * mips-opc.c: Update copyright years.
188 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
190 * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
192 2002-03-15 Chris Demetriou <cgd@broadcom.com>
194 * mips-dis.c (is_newabi): Fix ABI decoding.
196 2002-03-14 Chris G. Demetriou <cgd@broadcom.com>
198 * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
199 and bfd_mach_mipsisa64 cases to match the rest.
201 2002-03-13 Nick Clifton <nickc@cambridge.redhat.com>
203 * po/fr.po: Updated version.
205 2002-03-13 Alan Modra <amodra@bigpond.net.au>
207 * ppc-opc.c: Add optional `L' field to tlbie.
208 (XRTLRA_MASK): Define.
210 2002-03-06 Chris Demetriou <cgd@broadcom.com>
212 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
215 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
217 2002-03-05 Paul Koning <pkoning@equallogic.com>
219 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
220 for float opcodes that take float operands. Add alternate
221 names (xxxD vs. xxxF) for float opcodes.
222 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
223 (print_foperand): New function to handle float opcode operands.
224 (print_insn_pdp11): Use print_foperand to disassemble float ops.
226 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
230 2002-02-26 Brian Gaeke <brg@dgate.org>
232 * Makefile.am (install-data-local): Install dis-asm.h.
234 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
236 * configure.in (LINGUAS): Add de.po.
237 * configure: Regenerate.
238 * po/de.po: New file.
240 2002-02-25 Alan Modra <amodra@bigpond.net.au>
242 * ppc-dis.c (powerpc_dialect): Handle power4 option.
243 * ppc-opc.c (insert_bdm): Correct description of "at" branch
244 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
245 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
246 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
247 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
248 (PPCCOM32, PPCCOM64): Delete.
249 (NOPOWER4, POWER4): Define.
250 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
251 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
252 are enabled for power4 rather than ppc64.
254 2002-02-20 Tom Rix <trix@redhat.com>
256 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
258 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
260 * s390-dis.c (init_disasm): Use renamed architecture defines.
262 2002-02-19 matthew green <mrg@redhat.com>
264 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
267 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
269 * po/tr.po: Updated translation.
271 2002-02-15 Richard Henderson <rth@redhat.com>
273 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
276 2002-02-15 Richard Henderson <rth@redhat.com>
278 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
281 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
283 * po/da.po: Updated translation.
285 2002-02-12 Graydon Hoare <graydon@redhat.com>
287 * cgen-asm.in (parse_insn_normal): Change call from
288 @arch@_cgen_parse_operand to cd->parse_operand, to
289 facilitate CGEN_ASM_INIT_HOOK doing useful work.
291 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
293 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
296 2002-02-11 Alan Modra <amodra@bigpond.net.au>
298 * Makefile.am: "make dep-am".
299 * Makefile.in: Regenerate.
300 * aclocal.m4: Regenerate.
301 * config.in: Regenerate.
302 * configure: Regenerate.
304 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
306 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
307 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
309 * configure: Regenerate.
311 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
313 * cgen-dis.c: Add prototypes for count_decodable_bits
314 and add_insn_to_hash_chain.
316 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
318 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
319 * configure: Rebuilt.
321 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
323 * or32-opc.c: Fix compile time warning messages.
324 * or32-dis.c: Fix compile time warning messages.
326 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
329 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
330 * sh64-opc.c: Regenerate.
331 2001-03-13 DJ Delorie <dj@redhat.com>
332 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
333 purpose is more obvious.
334 * sh64-opc.c (shmedia_table): Ditto.
335 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
336 (print_insn_shmedia): Ditto.
337 2001-03-12 DJ Delorie <dj@redhat.com>
338 * sh64-opc.c: Adjust comments to reflect reality: replace bits
339 3:0 with zeros (not "reserved"), replace "rrrrrr" with
340 "gggggg" for two-operand floating point opcodes. Remove
342 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
343 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
344 Correct printing of .byte:s. Return number of printed bytes or
346 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
347 to next four-byte-alignment if insn or data is not aligned.
348 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
349 * sh64-dis.c: Update comments and fix comment formatting.
350 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
351 Abort instead of setting length to 0.
352 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
353 crange_bsearch_cmpl, sh64_get_contents_type,
354 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
355 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
356 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
357 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
358 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
359 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
360 address with same prefix as SHcompact.
361 In the disassembler, use a .cranges section for linked executables.
362 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
363 and update for using structure in info->private_data.
364 (struct sh64_disassemble_info): New.
365 (is_shmedia_p): Delete.
366 (crange_qsort_cmpb): New function.
367 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
368 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
369 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
370 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
371 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
372 pair. Display addresses for linked executables only.
373 (print_insn_sh64x_media): Initialize info->private_data by calling
374 init_sh64_disasm_info.
375 (print_insn_sh64x): Ditto. Find out type of contents by calling
376 sh64_contents_type_disasm. Display data regions using ".long" and
377 ".byte" similar to unrecognized opcodes.
378 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
379 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
380 information in section flags before considering symbols. Don't
381 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
382 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
383 matching $target $canon_targets instead of looking at the
384 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
385 * configure: Regenerate.
386 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
387 * sh64-opc.c (shmedia_creg_table): New.
388 * sh64-opc.h (shmedia_creg_info): New type.
389 (shmedia_creg_table): Declare.
390 * sh64-dis.c (creg_name): New function.
391 (print_insn_shmedia): Use it.
392 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
393 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
394 print_insn_sh64l if little-endian.
395 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
396 (print_insn_sh64l): New.
397 (print_insn_sh64x): New.
398 (print_insn_sh64x_media): New.
399 (print_insn_sh64): Break out code to print_insn_sh64x and
400 print_insn_sh64x_media.
401 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
402 * sh64-opc.h: New file
403 * sh64-opc.c: New file
404 * sh64-dis.c: New file
405 * Makefile.am: Add sh64 targets.
406 (HFILES): Add sh64-opc.h.
407 (CFILES): Add sh64-opc.c and sh64-dis.c.
408 (ALL_MACHINES): Add sh64 files.
409 * Makefile.in: Regenerate.
410 * configure.in: Add support for sh64 to bfd_sh_arch.
411 * configure: Regenerate.
412 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
413 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
415 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
416 * po/POTFILES.in: Regenerate.
417 * po/opcodes.pot: Regenerate.
419 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
421 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
423 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
425 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
427 2002-02-01 Alan Modra <amodra@bigpond.net.au>
429 * Makefile.am: Run "make dep-am"
430 * Makefile.in: Regenerate.
432 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
434 * or32-dis.c: New file.
435 * or32-opc.c: New file.
436 * configure.in: Add support for or32.
437 * configure: Regenerate.
438 * Makefile.am: Add support for or32.
439 * Makefile.in: Regenerate.
440 * disassemble.c: Add support for or32.
441 * po/POTFILES.in: Regenerate.
442 * po/opcodes.pot: Regenerate.
444 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
446 * configure: Regenerated.
448 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
450 * po/fr.po: Updated version.
452 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
454 * po/es.po: Updated version.
456 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
458 * po/da.po: New version.
460 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
462 * po/da.po: New file: Spanish translation.
463 * configure.in (ALL_LINGUAS): Add da.
464 * configure: Regenerate.
466 2002-01-22 Graydon Hoare <graydon@redhat.com>
468 * fr30-asm.c: Regenerate.
469 * fr30-desc.c: Likewise.
470 * fr30-desc.h: Likewise.
471 * fr30-dis.c: Likewise.
472 * fr30-ibld.c: Likewise.
473 * fr30-opc.c: Likewise.
474 * fr30-opc.h: Likewise.
475 * m32r-asm.c: Likewise.
476 * m32r-desc.c: Likewise.
477 * m32r-desc.h: Likewise.
478 * m32r-dis.c: Likewise.
479 * m32r-ibld.c: Likewise.
480 * m32r-opc.c: Likewise.
481 * m32r-opc.h: Likewise.
482 * m32r-opinst.c: Likewise.
483 * openrisc-asm.c: Likewise.
484 * openrisc-desc.c: Likewise.
485 * openrisc-desc.h: Likewise.
486 * openrisc-dis.c: Likewise.
487 * openrisc-ibld.c: Likewise.
488 * openrisc-opc.c: Likewise.
489 * openrisc-opc.h: Likewise.
490 * xstormy16-desc.c: Likewise.
492 2002-01-22 Richard Henderson <rth@redhat.com>
494 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
497 2002-01-22 Alan Modra <amodra@bigpond.net.au>
499 * Makefile.am: Run "make dep-am".
500 * Makefile.in: Regenerate.
501 * opcodes/po/POTFILES.in: Regenerate.
503 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
505 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
506 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
508 2002-01-18 Keith Walker <keith.walker@arm.com>
510 * arm-opc.h (arm_opcodes): Add bxj instruction.
512 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
514 * po/opcodes.pot: Regenerate.
515 * po/fr.po: Regenerate.
516 * po/sv.po: Regenerate.
517 * po/tr.po: Regenerate.
519 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
521 * po/tr.po: Import new version.
523 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
525 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
526 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
529 2002-01-10 matthew green <mrg@redhat.com>
531 * xstormy16-asm.c: Regenerate.
532 * xstormy16-desc.c: Likewise.
533 * xstormy16-desc.h: Likewise.
534 * xstormy16-dis.c: Likewise.
535 * xstormy16-opc.c: Likewise.
536 * xstormy16-opc.h: Likewise.
538 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
540 * po/es.po: New file: Spanish translation.
541 * configure.in (ALL_LINGUAS): Add es.
542 * configure: Regenerate.
544 2001-12-31 Jeffrey A Law (law@redhat.com)
546 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
547 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
548 Always emit a space after 'H'.
550 2001-12-18 matthew green <mrg@redhat.com>
552 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
554 2001-12-17 Richard Henderson <rth@redhat.com>
556 * alpha-opc.c (unop): Encode with RB as $sp.
558 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
560 * Makefile.am: Add support for xstormy16.
561 * Makefile.in: Regenerate.
562 * configure.in: Add support for xstormy16.
563 * configure: Regenerate.
564 * disassemble.c: Add support for xstormy16.
565 * xstormy16-asm.c: New generated file.
566 * xstormy16-desc.c: New generated file.
567 * xstormy16-desc.h: New generated file.
568 * xstormy16-dis.c: New generated file.
569 * xstormy16-ibld.c: New generated file.
570 * xstormy16-opc.c: New generated file.
571 * xstormy16-opc.h: New generated file.
573 2001-12-06 Richard Henderson <rth@redhat.com>
575 * alpha-opc.c (alpha_opcodes): Add wh64en.
577 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
579 * d10v-opc.c (d10v_predefined_registers): Remove warnings
580 introduced in Nov 29's patch.
582 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
585 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
588 * d10v-opc.c (RSRC_NOSP): New macro.
589 (d10v_operands): Add it.
590 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
592 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
594 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
595 (RSRC_SP): New macro.
596 (d10v_operands): Add it.
597 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
599 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
601 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
602 Also, break out of the loop as soon as an instruction has been
605 2001-11-17 matthew green <mrg@redhat.com>
607 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
609 2001-11-15 Alan Modra <amodra@bigpond.net.au>
611 * po/POTFILES.in: Regenerate.
613 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
614 (insert_bat, extract_bat, insert_bba, extract_bba,
615 insert_bd, extract_bd, insert_bdm, extract_bdm,
616 insert_bdp, extract_bdp, valid_bo,
617 insert_bo, extract_bo, insert_boe, extract_boe,
618 insert_ds, extract_ds, insert_de, extract_de,
619 insert_des, extract_des, insert_li, extract_li,
620 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
621 insert_nb, extract_nb, insert_nsi, extract_nsi,
622 insert_ral, insert_ram, insert_ras,
623 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
624 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
625 (extract_bd, extract_bdm, extract_bdp,
626 extract_ds, extract_des,
627 extract_li, extract_nsi): Implement sign extension without conditional.
628 (insert_bdm, extract_bdm,
629 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
630 (extract_bdm, extract_bdp): Correct 32 bit validation.
631 (AT1_MASK, AT2_MASK): Define.
632 (BBOAT_MASK): Define.
633 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
634 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
635 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
636 (PPCCOM32, PPCCOM64): Define.
637 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
638 and add new patterns to implement 64 bit branches with hints. Move
639 booke instructions so they match before ppc64.
641 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
642 64 bit default targets, and parse "32" and "64" in options.
644 (print_insn_powerpc): Pass dialect to operand->extract.
646 2001-11-14 Dave Brolley <brolley@redhat.com>
648 * cgen-dis.c (count_decodable_bits): New function.
649 (add_insn_to_hash_chain): New function.
650 (hash_insn_array): Call add_insn_to_hash_chain.
651 (hash_insn_list): Call add_insn_to_hash_chain.
652 * m32r-dis.c: Regenerated.
653 * fr30-dis.c: Regenerated.
655 2001-11-14 Andreas Jaeger <aj@suse.de>
657 * i386-dis.c (print_insn): Use x86-64 as option.
659 2001-11-14 Alan Modra <amodra@bigpond.net.au>
661 * disassemble.c (disassembler): Call print_insn_i386.
662 * i386-dis.c (SUFFIX_ALWAYS): Define.
663 (struct dis_private): Add orig_sizeflag.
664 (print_insn_i386): Make it a wrapper, calling..
665 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
666 warning without using volatile by moving orig_sizeflag to priv,
667 and removing inbuf. Parse disassembler_options.
668 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
670 (putop): Remove #ifdef SUFFIX_ALWAYS.
672 2001-11-11 Timothy Wall <twall@alum.mit.edu>
674 * tic54x-dis.c: Use revised opcode structure. Export opcode
676 (has_lkaddr): Don't forget about Lmem insns.
677 * tic54x-opc.c: Add emulation trap. Parallel table now uses
678 standard opcode templates.
680 2001-11-13 Zack Weinberg <zack@codesourcery.com>
682 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
683 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
684 category instead of Ew.
686 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
688 * m68k-opc.c: Fix definitions of wddata[bwl].
690 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
692 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
693 fit in the buffer, try to match the empty keyword.
695 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
697 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
698 * fr30-ibld.c: Regenerate.
699 * m32r-ibld.c: Regenerate.
700 * openrisc-ibld.c: Regenerate.
702 2001-11-04 Chris Demetriou <cgd@broadcom.com>
704 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
706 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
708 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
709 * configure: Regernate.
710 * po/fr.po: New file.
711 * po/sv.po: New file.
712 * po/tr.po: New file.
714 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
716 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
719 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
721 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
723 * Makefile.in: Regenerate.
724 * mmix-dis.c, mmix-opc.c: New files.
726 2001-10-29 Kazu Hirata <kazu@hxi.com>
728 * d30v-dis.c: Fix a comment typo.
730 2001-10-23 Chris Demetriou <cgd@broadcom.com>
732 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
733 "bltzall" as writing GPR 31 (since they do).
735 * mips-dis.c (print_insn_arg): Calculate info->target
737 (print_insn_mips): Fill in instruction info.
738 (print_mips16_insn_arg): Remove unneded variable 'val'.
739 Removed duplicated instruction target calculations,
740 calculate once and print that result. Use same idiom for
741 masking the jump segment bits as is used in print_insn_arg.
743 2001-10-20 Alan Modra <amodra@bigpond.net.au>
745 * ppc-opc.c (CT): Make it an optional operand.
747 2001-10-17 Chris Demetriou <cgd@broadcom.com>
749 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
750 SB-1 binaries include instructions specific to the SB-1.
751 * mips-opc.c (SB1): New definition.
752 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
753 "recip.ps", "rsqrt.ps", and "sqrt.ps".
755 2001-10-17 matthew green <mrg@redhat.com>
757 * ppc-opc.c (STRM): New AltiVec operand.
758 (XDSS): New AltiVec instruction form.
759 (mtvscr): Correct operand list.
760 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
762 2001-10-17 Alan Modra <amodra@bigpond.net.au>
764 * po/POTFILES.in: Regenerate.
766 2001-10-13 matthew green <mrg@redhat.com>
768 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
769 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
770 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
772 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
774 * cgen-ibld.in: Include safe-ctype.h in preference to
776 * cgen-asm.in: Include safe-ctype.h in preference to
777 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
778 TOLOWER instead of tolower.
779 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
780 string elements in constructed regular expression.
781 * fr30-asm.c: Regenerate.
782 * fr30-desc.c: Regenerate.
783 * fr30-ibld.c: Regenerate.
784 * m32r-asm.c: Regenerate.
785 * m32r-desc.c: Regenerate.
786 * m32r-ibld.c: Regenerate.
787 * openrisc-asm.c: Regenerate.
788 * openrisc-desc.c: Regenerate.
789 * openrisc-ibld.c: Regenerate.
790 * po/opcodes.pot: Regenerate.
792 2001-10-12 matthew green <mrg@redhat.com>
794 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
795 instruction field instruction/extraction functions for new BookE
796 DE form instructions.
797 (CT): New macro for CT field in an X form instruction.
798 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
800 (PPC64): Don't include PPC_OPCODE_PPC.
801 (403): New opcode macro for PPC403 processors.
802 (BOOKE): New opcode macro for BookE processors.
803 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
804 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
805 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
806 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
807 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
808 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
809 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
810 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
811 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
812 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
813 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
814 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
815 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
816 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
818 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
819 for a disassembler option of `booke', `booke32' or `booke64' to enable
820 BookE support in the disassembler.
822 2001-10-12 John Healy <jhealy@redhat.com>
824 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
825 for the length when extracting the base part of the insn.
827 2001-10-09 Bruno Haible <haible@clisp.cons.org>
829 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
830 regular expression. Fix some formatting problems.
831 * fr30-asm.c: Regenerate.
832 * openrisc-asm.c: Regenerate.
833 * m32r-asm.c: Regenerate.
835 2001-10-09 Christian Groessler <cpg@aladdin.de>
837 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
838 of indirect register memory accesses to be same format the
841 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
843 * sh-opc.h: Fix encoding of least significant nibble of the
844 DSP single data transfer instructions.
846 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
849 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
851 * cgen-asm.in: Fix compile time warning messages in generated
853 * cgen-dis.in: The same.
854 * cgen-ibld.in: The same.
855 * fr30-asm.c: Regenerate.
856 * fr30-desc.c: Regenerate.
857 * fr30-dis.c: Regenerate.
858 * fr30-ibld.c: Regenerate.
859 * fr30-opc.c: Regenerate.
860 * m32r-asm.c: Regenerate.
861 * m32r-desc.c: Regenerate.
862 * m32r-dis.c: Regenerate.
863 * m32r-ibld.c: Regenerate.
864 * m32r-opc.c: Regenerate.
865 * m32r-opinst.c Regenerate.
866 * openrisc-asm.c: Regenerate.
867 * openrisc-desc.c: Regenerate.
868 * openrisc-dis.c: Regenerate.
869 * openrisc-ibld.c: Regenerate.
870 * openrisc-opc.c: Regenerate.
871 * openrisc-opc.h: Regenerate.
872 * Makefile.in: Regenerate.
873 * po/POTFILES.in: Regenerate.
874 * po/opcodes.pot: Regenerate.
876 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
878 * arm-opc.h (arm_opcodes): Add cirrus insns.
880 * arm-dis.c (print_insn_arm): Add 'I' case.
882 2001-10-03 Alan Modra <amodra@bigpond.net.au>
884 * po/POTFILES.in: Regenerate.
885 * configure: Regenerate.
887 2001-10-02 Alan Modra <amodra@bigpond.net.au>
889 * Makefile.am (Makefile): Depend on bfd/configure.in.
891 * Makefile.in: Regenerate.
893 2001-09-30 John Healy <jhealy@redhat.com>
895 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
896 calls to cgen_get_insn_value and cgen_put_insn_value calls.
897 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
899 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
901 * Makefile.am: Update dependencies with "make dep-am".
902 * Makefile.in: Regenerate.
904 2001-09-26 Alan Modra <amodra@bigpond.net.au>
906 * arc-dis.c: Formatting fixes.
907 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
909 2001-09-21 Bruno Haible <haible@clisp.cons.org>
911 * arc-dis.c: Don't include <ctype.h>.
912 * openrisc-desc.c: Likewise.
913 * openrisc-ibld.c: Likewise.
915 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
917 * fr30-opc.c: Fix compile time warning messages.
918 * i370-opc.c: Fix compile time warning messages.
919 * i960-dis.c: Fix compile time warning messages.
920 * m32r-asm.c: Fix compile time warning messages.
921 * m32r-desc.c: Fix compile time warning messages.
922 * m32r-dis.c: Fix compile time warning messages.
923 * m32r-ibld.c: Fix compile time warning messages.
924 * m32r-opc.c: Fix compile time warning messages.
925 * m32r-opinst.c: Fix compile time warning messages.
926 * ns32k-dis.c: Fix compile time warning messages.
927 * openrisc-asm.c: Fix compile time warning messages.
928 * openrisc-desc.c: Fix compile time warning messages.
929 * openrisc-dis.c: Fix compile time warning messages.
930 * openrisc-ibld.c: Fix compile time warning messages.
931 * openrisc-opc.c: Fix compile time warning messages.
932 * pdp11-dis.c: Fix compile time warning messages.
933 * tic54x-dis.c: Fix compile time warning messages.
934 * v850-opc.c: Fix compile time warning messages.
935 * vax-dis.c: Fix compile time warning messages.
936 * w65-opc.h: Fix compile time warning messages.
937 * z8k-opc.h: Fix compile time warning messages.
938 * z8kgen.c: Fix compile time warning messages.
940 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
942 * arm-dis.c: Fix compile time warning messages.
943 * cgen-asm.c: Fix compile time warning messages.
944 * cgen-dis.c: Fix compile time warning messages.
945 * cris-dis.c: Fix compile time warning messages.
946 * d10v-dis.c: Fix compile time warning messages.
947 * fr30-asm.c: Fix compile time warning messages.
948 * fr30-desc.c: Fix compile time warning messages.
949 * fr30-dis.c: Fix compile time warning messages.
950 * fr30-ibld.c: Fix compile time warning messages.
952 2001-09-18 Bruno Haible <haible@clisp.cons.org>
954 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
955 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
956 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
957 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
959 (cgen_keyword_add): Use ISALNUM instead of isalnum.
960 (hash_keyword_name): Use TOLOWER instead of tolower.
961 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
962 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
964 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
965 * fr30-desc.c: Don't include <ctype.h>.
966 * fr30-ibld.c: Likewise.
967 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
968 (load_insn_classes, parse_resource_users, load_depfile): Use
969 ISSPACE instead of isspace.
970 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
971 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
973 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
974 * m32r-desc.c: Don't include <ctype.h>.
975 * m32r-ibld.c: Likewise.
976 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
977 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
979 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
981 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
983 * Makefile.am: Add rules and dependencies to create the s/390 opcode
984 table out of s390-opc.txt automatically.
985 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
986 * s390-mkopc.c (dumpTable): Change output to create a complete file.
987 * s390-opc.c: New improved opcode format macros and remove the
988 pregenerated opcode table.
989 * s390-opc.txt: Adapt to new improved opcode format macros.
991 2001-09-14 David Schleef <ds@schleef.org>
993 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
995 2001-09-04 Alan Modra <amodra@bigpond.net.au>
997 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
998 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
1000 2001-08-31 Eric Christopher <echristo@redhat.com>
1001 Jason Eckhardt <jle@redhat.com>
1003 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
1004 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
1007 2001-08-31 Andreas Jaeger <aj@suse.de>
1009 * tic54x-opc.c: Add default initializers to avoid warnings.
1011 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
1012 * arc-ext.c: Likewise.
1014 2001-08-28 matthew green <mrg@redhat.com>
1016 * ppc-opc.c (icbt): Order correctly.
1018 2001-08-27 David Edelsohn <dje@watson.ibm.com>
1019 Torbjorn Granlund <tege@swox.com>
1021 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
1023 (insert_ds): Complain if not a multiple of 4.
1025 (XSYNC_MASK): Define.
1026 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
1027 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
1029 2001-08-26 Andreas Jaeger <aj@suse.de>
1031 * h8500-opc.h: Add default initializers to h8500_table to shut up
1034 2001-08-25 Andreas Jaeger <aj@suse.de>
1036 * tic54x-dis.c: Add unused attributes where needed.
1038 * z8k-dis.c (output_instr): Add unused attribute.
1040 * h8300-dis.c: Add missing prototypes.
1041 (bfd_h8_disassemble): Make static.
1043 * cris-dis.c: Add missing prototype.
1044 * h8500-dis.c: Likewise.
1045 * m68hc11-dis.c: Likewise.
1046 * pj-dis.c: Likewise.
1047 * tic54x-dis.c: Likewise.
1048 * v850-dis.c: Likewise.
1049 * vax-dis.c: Likewise.
1050 * w65-dis.c: Likewise.
1051 * z8k-dis.c: Likewise.
1053 * d10v-dis.c: Add missing prototype.
1054 (dis_long): Remove unused variable.
1055 (dis_2_short): Likewise.
1057 * sh-dis.c: Add missing prototypes.
1058 * v850-opc.c: Likewise.
1059 Add unused attributes where needed.
1061 * ns32k-dis.c: Add missing prototypes.
1062 (bit_extract_simple): Remove unused variable.
1064 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
1066 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
1067 branch instructions for gcc 3.0.
1068 * opcodes/s390-opc.txt: Likewise.
1070 2001-08-21 Andreas Jaeger <aj@suse.de>
1072 * i960-dis.c: Add parameters for prototypes
1073 (ctrl): Add unused attributes.
1075 (put_abs): Likewise.
1077 * mips-dis.c: Add missing prototypes.
1078 * a29k-dis.c: Likewise.
1079 * arc-dis.c: Likewise.
1080 * ia64-opc.c: Likewise.
1082 * s390-dis.c: Add missing prototypes.
1083 (init_disasm): Remove unused attribute since the parameter is
1086 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1088 * mips-opc.c (M1): Define. Reformatted Code.
1089 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
1092 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
1094 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
1095 the corresponding non-likely insn is in MIPS I.
1097 2001-08-13 Kazu Hirata <kazu@hxi.com>
1099 * mcore-dis.c: Fix formatting.
1100 * mips-dis.c: Likewise.
1101 * pj-dis.c: Likewise.
1102 * z8k-dis.c: Likewise.
1104 2001-08-12 Richard Henderson <rth@redhat.com>
1106 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
1107 to *VALUEP. Regenerate all cgen files.
1109 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
1111 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
1113 * mips-opc.c (G6): Undefine.
1114 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
1115 as the first "move" alternative.
1117 2001-08-10 Andreas Jaeger <aj@suse.de>
1119 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
1121 * configure: Regenerate.
1123 2001-08-10 Alan Modra <amodra@bigpond.net.au>
1125 * ppc-opc.c: Revert 2001-08-08.
1127 2001-08-09 Alan Modra <amodra@bigpond.net.au>
1129 * dis-buf.c (generic_strcat_address): Add missing prototype.
1130 #if 0 the functions as it is unused.
1132 2001-08-08 Alan Modra <amodra@bigpond.net.au>
1134 1999-10-25 Torbjorn Granlund <tege@swox.com>
1135 * ppc-opc.c: Include "bfd.h".
1136 (powerpc_operands): Add new field for reloc type.
1138 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1140 * mips-dis.c (print_insn_arg): Don't use software integer registers
1141 for coprocessor registers.
1142 (get_mips_isa): Removed.
1143 (is_newabi): New function, checks if NewABI is used.
1144 (_print_insn_mips): Get distinction between old ABI and new ABI right.
1146 2001-08-01 Christian Groessler <cpg@aladdin.de>
1148 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
1149 get stderr definition.
1150 (internal, gas): Removed warnings.
1151 (gas): Create a correct final entry for created array.
1152 * z8k-opc.h: Recreated with new z8kgen.
1154 2001-07-28 Kazu Hirata <kazu@hxi.com>
1156 * i386-dis.c: Fix formatting.
1158 2001-07-28 Matthias Kramm <kramm@quiss.org>
1160 * i386-dis.c: Change formatting conventions for architecture
1161 i386:intel to better match the format of various intel i386
1162 assemblers, like nasm, tasm or masm.
1164 2001-07-24 Alan Modra <amodra@bigpond.net.au>
1166 * Makefile.am: Update dependencies with "make dep-am".
1167 * Makefile.in: Regenerate
1169 2001-07-24 Kazu Hirata <kazu@hxi.com>
1171 * alpha-dis.c: Fix formatting.
1172 * cris-dis.c: Likewise.
1173 * d10v-dis.c: Likewise.
1174 * d30v-dis.c: Likewise.
1175 * m10300-dis.c: Likewise.
1176 * tic54x-dis.c: Likewise.
1178 2001-07-23 Kazu Hirata <kazu@hxi.com>
1180 * m68k-dis.c: Fix formatting.
1181 * pj-dis.c: Likewise.
1182 * s390-dis.c: Likewise.
1183 * z8k-dis.c: Likewise.
1185 2001-07-21 Chris Demetriou <cgd@broadcom.com>
1187 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
1188 into the rest of the surrounding definitions.
1190 2001-07-18 Alan Modra <amodra@bigpond.net.au>
1192 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1193 for lgdt, lidt, sgdt, sidt.
1195 2001-07-13 Philip Blundell <philb@gnu.org>
1197 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1199 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1201 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1203 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1204 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1205 to verify if it is worth parsing the insn as insn "x". Also update
1206 error message when insn is not a recognized format of the insn vs
1207 when the insn is completely unrecognized.
1209 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1211 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1213 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1214 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1216 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1218 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1219 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1220 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1222 2001-07-05 Ben Elliston <bje@redhat.com>
1224 * Makefile.am (CPUDIR): Define.
1225 (stamp-m32r): Update dependencies.
1226 (stamp-fr30): Ditto.
1227 (stamp-openrisc): Ditto.
1228 * Makefile.in: Regenerate.
1230 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1232 * ppc-opc.c: Fix encoding of 'clf' instruction.
1234 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1236 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1238 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1240 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1241 * cgen-opc.c (cgen_keyword_add): Ignore special first
1242 character when building nonalpha_chars field.
1244 2001-06-24 Ben Elliston <bje@redhat.com>
1246 * m88k-dis.c: Format to conform to GNU coding standards.
1248 2001-06-23 Andreas Jaeger <aj@suse.de>
1250 * disassemble.c (disassembler_usage): Add unused attribute.
1252 2001-06-22 Eric Christopher <echristo@redhat.com>
1254 * mips-opc.c: Move prefx to start of the table.
1256 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1258 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1261 2001-06-22 Pauli <pauli@moreton.com.au>
1263 * m68k-opc.c: Add wdebug instruction.
1265 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1267 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1269 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1271 * cgen-asm.c (cgen_parse_keyword): When looking for the
1272 boundaries of a keyword, allow any special characters
1273 that are actually in one of the allowed keyword.
1274 * cgen-opc.c (cgen_keyword_add): Add any special characters
1275 to the nonalpha_chars field.
1277 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1279 * s390-opc.c: Add lgh instruction.
1280 * s390-opc.txt: Likewise.
1282 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1284 * i386-dis.c: Group function prototypes in one place.
1285 (FLOATCODE): Redefine as 1.
1286 (USE_GROUPS): Redefine as 2.
1287 (USE_PREFIX_USER_TABLE): Redefine as 3.
1288 (X86_64_SPECIAL): Define as 4.
1289 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1290 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1291 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1292 (dis386): New table combining above four tables.
1293 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1294 (dis386_twobyte): New table combining above two tables.
1295 (x86_64_table): New table to handle x86_64.
1297 (float_mem_att, float_mem_intel): Delet.
1298 (float_mem): New table combining above two tables.
1299 (print_insn_i386): Modify for above.
1300 (dofloat): Likewise.
1301 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1302 Return 0 on success, 1 if no valid alternative.
1303 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1304 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1305 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1306 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1308 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1309 (OP_I64): If not 64-bit mode, call OP_I.
1310 OP_OFF64): If not 64-bit mode, call OP_OFF.
1311 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1312 'ignore'/'ignored' to 'bytemode'.
1314 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1316 * configure.in: Sort 'ta' case statement.
1317 * configure: Regenerate.
1319 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1321 (disx86_64_att): Likewise.
1322 (dis386_twobyte_att): Likewise.
1323 (print_insn_i386): Don't print branch hints as a prefix.
1324 (putop): 'H' macro prints branch hints.
1325 (get64): Kill compile warnings.
1327 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1329 * sh-opc.h (sh_table): Don't use empty initializers.
1331 2001-06-06 Christian Groessler <cpg@aladdin.de>
1333 * z8k-dis.c: Fix formatting.
1334 (unpack_instr): Remove unused cases in switch statement. Add
1335 safety abort() in default case.
1336 (unparse_instr): Add safety abort() in default case.
1338 2001-06-06 Peter Jakubek <pjak@snafu.de>
1340 * m68k-dis.c (print_insn_m68k): Fix typo.
1341 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1342 mcf (ColdFire) div, rem and moveb instructions.
1344 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1346 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1347 (cond_jump_mode, loop_jcxz_mode): Define.
1348 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1349 appropriate, and 'F' suffix to loop insns.
1350 (disx86_64_att): Likewise.
1351 (dis386_twobyte_att): Likewise.
1352 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1353 Output data size prefix for long conditional jumps. Output cs and
1355 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1356 (OP_J): Don't make PREFIX_DATA used.
1358 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1360 * sh-opc.h (sh_table): Complete last element entry to avoid
1363 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1365 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1367 2001-05-23 Alan Modra <amodra@one.net.au>
1369 * arc-opc.c: Whitespace changes.
1371 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1373 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1376 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1378 * cgen-dis.in (extract_normal): Complete support for min<base case.
1380 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1382 * mips-dis.c (INSNLEN): Rename MAXLEN.
1383 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1384 (print_insn_arg): Remove $ prefix of register names.
1385 (set_mips_isa_type): Remove.
1386 (mips_isa_type): New function.
1387 (get_mips_isa): New Function.
1388 (print_insn_mips): Rename _print_insn_mips.
1389 (_print_insn_mips): New function, contains code which was
1390 duplicated in print_insn_big_mips and print_insn_little_mips.
1391 (print_insn_big_mips): Moved code to _print_insn_mips.
1392 (print_insn_little_mips): Likewise.
1393 (print_mips16_insn_arg): Remove $ prefix of register names.
1394 Print error message before abort.
1396 2001-05-14 J.T. Conklin <jtc@redback.com>
1398 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1399 simplified mnemonics used for setting PPC750-specific special
1402 2001-05-12 H.J. Lu <hjl@gnu.org>
1404 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1407 2001-05-12 Peter Targett <peter.targett@arccores.com>
1409 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1410 register to r/w. Formatting fixes throughout file.
1412 2001-05-12 Alan Modra <amodra@one.net.au>
1414 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1416 (twobyte_has_modrm): Update table.
1417 (need_modrm): Give it file scope.
1418 (MODRM_CHECK): Define.
1419 (dofloat): Use MODRM_CHECK.
1424 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1426 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1427 even at end of a section.
1428 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1429 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1431 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1433 * disassemble.c (disassembler_usage): Remove unused attribute.
1435 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1437 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1439 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1441 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1442 assume incoming buffer already has the base insn loaded. Handle
1443 smaller-than-base instructions for variable-length case.
1445 2001-05-04 Alan Modra <amodra@one.net.au>
1447 * i386-dis.c (Ev, Ed): Remove duplicate define.
1450 (OP_XS): New function.
1451 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1453 (dis386_twobyte_intel): Likewise.
1454 (prefix_user_table): Use MS for maskmovq operand.
1456 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1458 * Makefile.am: Add OpenRISC target.
1459 * Makefile.in: Regenerated.
1461 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1463 * configure.in (bfd_openrisc_arch): Add target.
1464 * configure: Regenerated.
1466 * openrisc-asm.c: New file.
1467 * openrisc-desc.c: Likewise.
1468 * openrisc-desc.h: Likewise.
1469 * openrisc-dis.c: Likewise.
1470 * openrisc-ibld.c: Likewise.
1471 * openrisc-opc.c: Likewise.
1472 * openrisc-opc.h: Likewise.
1474 2001-04-24 Christian Groessler <cpg@aladdin.de>
1476 * z8k-dis.c: add names of control registers (ctrl_names);
1477 (seg_length): provides instruction length fixup for segmented
1478 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1479 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1480 (unparse_intr): handle CLASS_PR, print addresses without '#'
1481 * z8k-opc.h: re-created with new z8kgen
1482 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1483 entries for ldctl/ldctlb instruction
1485 2001-04-06 Andreas Jaeger <aj@suse.de>
1487 * i386-dis.c: Add ffreep instruction.
1489 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1491 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1493 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1495 * i386-dis.c (PREGRP25): Define.
1496 (dis386_twobyte_att): Use here in place of "movntq" entry.
1497 (dis386_twobyte_intel): Likewise.
1498 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1500 (dis386_twobyte_att): Use here.
1501 (dis386_twobyte_intel): Likewise.
1502 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1503 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1504 (prefix_user_table): Cosmetic changes to "bad" entries.
1506 2001-03-23 Nick Clifton <nickc@redhat.com>
1508 * mips-opc.c: Remove extraneous whitespace.
1509 * mips-dis.c: Remove extraneous whitespace.
1511 2001-03-22 Ben Elliston <bje@redhat.com>
1513 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1514 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1515 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1516 to allay a compiler warning.
1518 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1520 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1521 (dis386_twobyte_intel): Likewise.
1522 (twobyte_has_modrm): Set entry for paddq, psubq.
1524 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1526 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1527 determination via CGEN_COMPUTE_MACH.
1528 * fr30-desc.c: Regenerate.
1529 * fr30-dis.c: Regenerate.
1530 * fr30-opc.h: Regenerate.
1531 * m32r-desc.c: Regenerate.
1532 * m32r-dis.c: Regenerate.
1533 * m32r-opc.h: Regenerate.
1534 * m32r-opinst.c: Regenerate.
1536 2001-03-20 H.J. Lu <hjl@gnu.org>
1538 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1539 * configure: Rebuild.
1541 2001-03-19 Jim Wilson <wilson@redhat.com>
1543 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1544 notestr if larger than xsect.
1545 (in_class): Handle format M5.
1546 * ia64-asmtab.c: Regnerate.
1548 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1550 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1551 has more than one byte left to read.
1553 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1555 * s390-opc.c: Add new opcodes. Smooth out formatting.
1556 * s390-opc.txt: Add new opcodes.
1558 2001-03-06 Nick Clifton <nickc@redhat.com>
1560 * arm-dis.c (print_insn_thumb): Compute destination address
1561 of BLX(1) instruction by taking bit 1 from PC and not from bit
1564 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1566 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1567 so command line switches will work.
1569 2001-03-05 Dave Brolley <brolley@redhat.com>
1571 * fr30-asm.c: Regenerate.
1572 * fr30-desc.c: Regenerate.
1573 * fr30-desc.h: Regenerate.
1574 * fr30-dis.c: Regenerate.
1575 * fr30-ibld.c: Regenerate.
1576 * fr30-opc.c: Regenerate.
1577 * fr30-opc.h: Regenerate.
1578 * m32r-asm.c: Regenerate.
1579 * m32r-desc.c: Regenerate.
1580 * m32r-desc.h: Regenerate.
1581 * m32r-dis.c: Regenerate.
1582 * m32r-ibld.c: Regenerate.
1583 * m32r-opc.c: Regenerate.
1584 * m32r-opc.h: Regenerate.
1585 * m32r-opinst.c: Regenerate.
1587 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1589 * m68k-opc.c: fix cpushl according to Motorola. Enable
1590 bunch of instructions for Coldfire 5407 and add all new.
1592 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1594 * configure.in (BFD_VERSION): Do without grep.
1595 * configure: Regenerate.
1596 * Makefile.am: Run "make dep-am".
1597 * Makefile.in: Regenerate.
1599 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1601 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1602 * ia64-asmtab.c: Regenerate.
1604 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1606 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1607 separate variants: one for IMM22 and the other for IMM14.
1608 * ia64-asmtab.c: Regenerate.
1610 2001-02-21 Greg McGary <greg@mcgary.org>
1612 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1614 2001-02-20 H.J. Lu <hjl@gnu.org>
1616 * Makefile.am (ia64-ic.tbl): Remove the target.
1617 (ia64-raw.tbl): Likewise.
1618 (ia64-waw.tbl): Likewise.
1619 (ia64-war.tbl): Likewise.
1620 (ia64-asmtab.c): Generate it in the source directory.
1621 * Makefile.in: Regenerated.
1623 2001-02-18 lars brinkhoff <lars@nocrew.org>
1625 * Makefile.am: Add PDP-11 target.
1626 * configure.in: Likewise.
1627 * disassemble.c: Likewise.
1628 * pdp11-dis.c: New file.
1629 * pdp11-opc.c: New file.
1631 2001-02-14 Jim Wilson <wilson@redhat.com>
1633 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1634 * ia64-asmtab.c: Regenerate.
1636 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1638 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1642 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1644 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1645 the following instruction not of the jump itself for the jump
1647 (print_mips16_insn_arg): Likewise.
1649 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1651 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1653 * Makefile.in: Regenerate.
1655 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1657 * Makefile.am: Add linux target for S/390.
1658 * Makefile.in: Likewise.
1659 * configure.in: Likewise.
1660 * disassemble.c: Likewise.
1661 * s390-dis.c: New file.
1662 * s390-mkopc.c: New file.
1663 * s390-opc.c: New file.
1664 * s390-opc.txt: New file.
1666 2001-02-05 Jim Wilson <wilson@redhat.com>
1668 * ia64-asmtab.c: Revert 2000-12-16 change.
1670 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1672 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1673 * m32r-desc.h: Regenerate.
1675 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1677 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1678 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1680 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1682 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1684 2001-01-13 Nick Clifton <nickc@redhat.com>
1686 * disassemble.c: Remove spurious white space.
1688 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1690 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1693 2001-01-11 Peter Targett <peter.targett@arccores.com>
1695 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1696 * Makefile.am (C_FILES): Add arc-ext.c.
1697 (ALL_MACHINES) Add arc-ext.lo.
1698 (INCLUDES) Add opcode directory to list.
1699 New dependency entry for arc-ext.lo.
1700 * disassemble.c (disassembler): Correct call to
1701 arc_get_disassembler.
1702 * arc-opc.c: New update for ARC, including full base
1703 instructions for ARC variants.
1704 * arc-dis.h, arc-dis.c: New update for ARC, including
1705 extensibility functionality.
1706 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1708 2001-01-10 Jan Hubicka <jh@suse.cz>
1710 * i386-dis.c (PREGRP15 - PREGRP24): New.
1711 (dis386_twobyt): Add SSE2 instructions.
1712 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1713 (twobyte_uses_f3_prefix): ... this one.
1714 (grps): Add SSE instructions.
1715 (prefix_user_table): Add two new slots; add SSE2 instructions.
1716 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1717 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1718 to prefix_user_table.
1719 (OP_E): Accept mfence and lfence as well.
1720 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1721 (OP_XMM): Support REX extensions.
1725 2001-01-09 Nick Clifton <nickc@redhat.com>
1727 * arm-dis.c (print_insn): Set pc to zero for instructions with
1728 a reloc associated with them.
1730 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1732 * cgen-asm.in (parse_insn_normal): Changed syn to be
1733 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1734 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1735 to '\0' to use 0 instead.
1736 * cgen-dis.in (print_insn_normal): Ditto.
1737 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1739 2001-01-05 Jan Hubicka <jh@suse.cz>
1741 * i386-dis.c: Add x86_64 support.
1742 (rex): New static variable.
1743 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1744 (USED_REX): New macro.
1745 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1746 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1747 (OP_REG, OP_OFF): Declare.
1748 (get64, get32, get32s): New functions.
1749 (r??_reg): New constants.
1750 (dis386_att): Change templates of instruction implicitly promoted
1751 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1753 (dis386_intel): Likewise.
1754 (dixx86_64_att): New table based on dis386_att.
1755 (dixx86_64_intel): New table based on dis386_intel.
1756 (names64, names8rex): New global variable.
1757 (names32, names16): Add extended registers.
1758 (prefix_user_t): Recognize rex prefixes.
1759 (prefix_name): Print REX prefixes nicely.
1760 (op_riprel): New global variable.
1761 (start_pc): Set type to bfd_vma.
1762 (print_insn_i386): Detect the 64bit mode and use proper table;
1763 move ckprefix after initializing the buffer; output unused rex prefixes;
1764 output information about target of RIP relative addresses.
1765 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1766 (print_operand_value): New function.
1767 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1768 REX prefix and new modes.
1769 (get64, get32s): New.
1770 (get32): Return bfd_signed_vma type.
1771 (set_op): Initialize the op_riprel.
1772 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1774 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1776 cgen-dis.in (read_insn): Use bfd_get_bits()
1778 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1780 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1781 (hash_insn_list): Likewise
1782 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1783 (extract_1): Use bfd_get_bits().
1784 (extract_normal): Apply sign extension to both extraction
1786 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1787 (cgen_put_insn_value): Use bfd_put_bits()
1789 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1791 * cgen-asm.in (parse_insn_normal): Print better error message for
1792 instructions with missing operands.
1794 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1796 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1798 2000-12-16 Nick Clifton <nickc@redhat.com>
1800 * Makefile.in: Regenerate.
1801 * aclocal.m4: Regenerate.
1802 * config.in: Regenerate.
1803 * configure.in: Add spacing.
1804 * configure: Regenerate.
1805 * ia64-asmtab.c: Regenerate.
1806 * po/opcodes.pot: Regenerate.
1808 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1810 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1811 error messages over later parse-time ones.
1813 2000-12-12 Jim Wilson <wilson@redhat.com>
1815 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1817 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1818 (print_dependency_table): Print NULL if semantics field not set.
1819 (insert_opcode_dependencies): Mark cmp parameter as unused.
1820 (print_main_table): Use fprintf_vma to print long long fields.
1821 (main): Mark argv paramter as unused. Convert to old style definition.
1822 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1823 * ia64-asmtab.c: Regnerate.
1825 2000-12-09 Nick Clifton <nickc@redhat.com>
1827 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1830 * fr30-dis.c: Regenerate.
1832 2000-12-08 Peter Targett <peter.targett@arccores.com>
1834 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1835 * Makefile.am (C_FILES): Add arc-ext.c.
1836 (ALL_MACHINES) Add arc-ext.lo.
1837 (INCLUDES) Add opcode directory to list.
1838 New dependency entry for arc-ext.lo.
1839 * disassemble.c (disassembler): Correct call to
1840 arc_get_disassembler.
1841 * arc-opc.c: New update for ARC, including full base
1842 instructions for ARC variants.
1843 * arc-dis.h, arc-dis.c: New update for ARC, including
1844 extensibility functionality.
1845 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1847 2000-12-03 Chris Demetriou cgd@sibyte.com
1849 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1850 MOD_HILO, and MOD_LO macros.
1852 * mips-opc.c (M1, M2): Delete.
1853 (mips_builtin_opcodes): Remove all uses of M1.
1855 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1856 instructions take "G" format second operands and use the
1858 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1860 Delete "sel" code operands from mfc1 and mtc1.
1861 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1864 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1865 Chris Demetriou cgd@sibyte.com
1867 * mips-opc.c (mips_builtin_opcodes): Finish additions
1868 for MIPS32 support, and clean up existing entries for
1869 aesthetics, consistency with the MIPS32 ISA, and
1870 with consistency the rest of the table.
1872 2000-12-01 Nick Clifton <nickc@redhat.com>
1874 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1877 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1879 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1880 specifiers. Update 'B' for new constant names, and remove
1882 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1883 near the top of the array, so they are disassembled properly.
1884 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1885 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1886 specifier. Add 'H' format specifier variants for "mfc1,"
1887 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1888 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1889 "wait" variant which uses 'J' operand specifier.
1891 * mips-dis.c (set_mips_isa_type): Update to use
1892 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1893 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1894 * mips-opc.c (I32): New constant for instructions added in
1897 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1899 * mips-dis.c (set_mips_isa_type): Add cases for
1900 bfd_mach_mips5 and bfd_mach_mips64.
1901 * mips-opc.c (I64): New definitions.
1903 * mips-dis.c (set_mips_isa_type): Add case for
1906 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1908 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1909 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1910 Initialize variable dc to NULL.
1911 (print_insn_shx): Remove unused label d_reg_n.
1913 2000-11-24 Nick Clifton <nickc@redhat.com>
1915 * arm-opc.h: Add new opcode formatting parameter 'B'.
1916 (arm_opcodes): Add XScale, v5, and v5te instructions.
1917 (thumb_opcodes): Add v5t instructions.
1919 * arm-dis.c (print_insn_arm): Handle new 'B' format
1921 (print_insn_thumb): Decode BLX(1) instruction.
1923 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1925 * mips-opc.c: Fix file header comment.
1927 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1929 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1930 print_insn_cris_with_register_prefix.
1932 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1934 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1936 2000-11-07 Matthew Green <mrg@redhat.com>
1938 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1939 must be loaded there in their entirety.
1941 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1943 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1944 (compute_arch_mask): Add v8plusb and v9b machines.
1945 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1946 * sparc-opc.c: Support for Cheetah instruction set.
1947 (prefetch_table): Add #invalidate.
1949 2000-10-16 Nick Clifton <nickc@redhat.com>
1951 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1953 2000-10-06 Dave Brolley <brolley@redhat.com>
1955 * fr30-desc.h: Regenerate.
1956 * m32r-desc.h: Regenerate.
1957 * m32r-ibld.c: Regenerate.
1959 2000-10-05 Jim Wilson <wilson@redhat.com>
1961 * ia64-ic.tbl: Update from Intel.
1962 * ia64-asmtab.c: Regenerate.
1964 2000-10-04 Kazu Hirata <kazu@hxi.com>
1966 * ia64-gen.c: Convert C++-style comments to C-style comments.
1967 * tic54x-dis.c: Likewise.
1969 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1971 Changes to add dollar prefix to registers for files where user symbols
1972 don't have a leading underscore. Fix formatting.
1973 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1974 (format_reg): Add parameter with_reg_prefix. All callers changed.
1975 (print_with_operands): Ditto.
1976 (print_insn_cris_generic): Renamed from print_insn_cris, add
1977 parameter with_reg_prefix.
1978 (print_insn_cris_with_register_prefix,
1979 print_insn_cris_without_register_prefix, cris_get_disassembler):
1981 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1983 2000-09-22 Jim Wilson <wilson@redhat.com>
1985 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1986 gt, ge, ngt, and nge.
1987 * ia64-asmtab.c: Regenerate.
1989 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1990 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1991 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1992 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1993 * ia64-asmtab.c: Regnerate.
1995 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1997 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1998 Add mfc0 and mtc0 with sub-selection values.
1999 Add clo and clz opcodes.
2000 Add msub and msubu instructions for MIPS32.
2001 Add madd/maddu aliases for mad/madu for MIPS32.
2002 Support wait, deret, eret, movn, pref for MIPS32.
2003 Support tlbp, tlbr, tlbwi, tlbwr.
2006 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
2007 (print_insn_arg): Handle 'H' args.
2008 (set_mips_isa_type): Recognize 4K.
2009 Use CPU_* defines instead of hardcoded numbers.
2011 2000-09-11 Catherine Moore <clm@redhat.com>
2013 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
2014 (d30v_format_tab): Use Rb2 for modinc and moddec.
2016 2000-09-07 Catherine Moore <clm@redhat.com>
2018 * d30v-opc.c (d30v_format_tab): Use format Ra for
2021 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
2023 * configure: Rebuilt with new libtool.m4.
2025 2000-09-05 Nick Clifton <nickc@redhat.com>
2027 * configure: Regenerate.
2028 * po/opcodes.pot: Regenerate.
2030 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
2032 * acinclude.m4: Include libtool and gettext macros from the
2034 * aclocal.m4, configure: Rebuilt.
2036 2000-08-30 Kazu Hirata <kazu@hxi.com>
2038 * tic80-dis.c: Fix formatting.
2040 2000-08-29 Kazu Hirata <kazu@hxi.com>
2042 * w65-dis.c: Fix formatting.
2044 2000-08-28 Mark Hatle <mhatle@mvista.com>
2046 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
2047 (powerpc_opcodes): Add table entries for PPC 405 instructions.
2048 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
2049 instructions. Added extended mnemonic mftbl as defined in the
2050 405GP manual for all PPCs.
2052 2000-08-28 Jim Wilson <wilson@redhat.com>
2054 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
2055 call. Change last goto to use failed instead of done.
2057 2000-08-28 Dave Brolley <brolley@redhat.com>
2059 * cgen-ibld.in (cgen_put_insn_int_value): New function.
2060 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2061 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
2062 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2063 * cgen-dis.in (read_insn): New static function.
2064 (print_insn): Use read_insn to read the insn into the buffer and set
2066 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
2068 * fr30-asm.c: Regenerated.
2069 * fr30-desc.c: Regenerated.
2070 * fr30-desc.h: Regenerated.
2071 * fr30-dis.c: Regenerated.
2072 * fr30-ibld.c: Regenerated.
2073 * fr30-opc.c: Regenerated.
2074 * fr30-opc.h: Regenerated.
2075 * m32r-asm.c: Regenerated.
2076 * m32r-desc.c: Regenerated.
2077 * m32r-desc.h: Regenerated.
2078 * m32r-dis.c: Regenerated.
2079 * m32r-ibld.c: Regenerated.
2080 * m32r-opc.c: Regenerated.
2082 2000-08-28 Kazu Hirata <kazu@hxi.com>
2084 * tic30-dis.c: Fix formatting.
2086 2000-08-27 Kazu Hirata <kazu@hxi.com>
2088 * sh-dis.c: Fix formatting.
2090 2000-08-24 David Edelsohn <dje@watson.ibm.com>
2092 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
2094 2000-08-24 Kazu Hirata <kazu@hxi.com>
2096 * z8k-dis.c: Fix formatting.
2098 2000-08-16 Jim Wilson <wilson@redhat.com>
2100 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
2101 break, mov-immediate, nop.
2102 * ia64-opc-f.c: Delete fpsub instructions.
2103 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
2104 address operand. Rewrite using macros to avoid long lines.
2105 * ia64-opc.h (POSTINC): Define.
2106 * ia64-asmtab.c: Regenerate.
2108 2000-08-15 Jim Wilson <wilson@redhat.com>
2110 * ia64-ic.tbl: Add missing entries.
2112 2000-08-08 Jason Eckhardt <jle@redhat.com>
2114 * i860-dis.c (print_br_address): Change third argument from int
2117 2000-08-07 Richard Henderson <rth@redhat.com>
2119 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
2120 for MLI templates. Handle IA64_OPND_TGT64.
2122 2000-08-04 Ben Elliston <bje@redhat.com>
2124 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
2125 * cgen.sh: Likewise.
2127 2000-08-02 Jim Wilson <wilson@redhat.com>
2129 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2131 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
2133 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
2134 Change return type from void to int. Check the combination
2135 of operands, return 1 if valid. Fix to avoid BUF overflow.
2136 Report undefined combinations of operands in COMMENT.
2137 Report internal errors to stderr. Output the adiw/sbiw
2138 constant operand in both decimal and hex.
2139 (print_insn_avr): Disassemble ldd/std with displacement of 0
2140 as ld/st. Check avr_operand () return value, handle invalid
2141 combinations of operands like unknown opcodes.
2143 2000-07-28 Ben Elliston <bje@redhat.com>
2145 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
2146 (run-cgen, stamp-m32r, stamp-fr30): New targets.
2147 * Makefile.in: Regenerate.
2148 * configure.in: Add --enable-cgen-maint option.
2149 * configure: Regenerate.
2151 2000-07-26 Dave Brolley <brolley@redhat.com>
2153 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
2154 (cgen_hw_lookup_by_num): Ditto.
2155 (cgen_operand_lookup_by_name): Ditto.
2156 (print_address): Ditto.
2157 (print_keyword): Ditto.
2158 * cgen-dis.c (hash_insn_array): Mark unused parameters with
2160 * cgen-asm.c (hash_insn_array): Mark unused parameters with
2162 (cgen_parse_keyword): Ditto.
2164 2000-07-22 Jason Eckhardt <jle@redhat.com>
2166 * i860-dis.c: New file.
2167 (print_insn_i860): New function.
2168 (print_br_address): New function.
2169 (sign_extend): New function.
2170 (BITWISE_OP): New macro.
2171 (I860_REG_PREFIX): New macro.
2172 (grnames, frnames, crnames): New structures.
2174 * disassemble.c (ARCH_i860): Define.
2175 (disassembler): Add check for bfd_arch_i860 to set disassemble
2176 function to print_insn_i860.
2178 * Makefile.in (CFILES): Added i860-dis.c.
2179 (ALL_MACHINES): Added i860-dis.lo.
2180 (i860-dis.lo): New dependences.
2182 * configure.in: New bits for bfd_i860_arch.
2184 * configure: Regenerated.
2186 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
2188 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
2189 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
2190 (cris-dis.lo, cris-opc.lo): New rules.
2191 * Makefile.in: Rebuild.
2192 * configure.in (bfd_cris_arch): New target.
2193 * configure: Rebuild.
2194 * disassemble.c (ARCH_cris): Define.
2195 (disassembler): Support ARCH_cris.
2196 * cris-dis.c, cris-opc.c: New files.
2197 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2199 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2201 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2202 Reported by Bill Clarke <llib@computer.org>.
2204 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2206 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2207 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2209 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2211 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2212 fput_const, extract_3, extract_5_load, extract_5_store,
2213 extract_5r_store, extract_5R_store, extract_10U_store,
2214 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2215 extract_12, extract_17, extract_22): Prototype.
2216 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2217 shadowing outer block.
2220 2000-07-05 DJ Delorie <dj@redhat.com>
2224 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2226 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2228 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2230 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2231 marked for translation (exception from the usual coding style).
2232 (print_insn_avr): Initialize insn2 to avoid warnings.
2234 2000-07-03 Kazu Hirata <kazu@hxi.com>
2236 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2237 * h8500-dis.c: Fix formatting.
2239 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2241 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2242 (CLEANFILES): Add DEPA.
2243 * Makefile.in: Regenerate.
2245 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2247 * arm-dis.c (regnames): Add an additional register set to match
2248 the set used by GCC. Make it the default.
2250 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2252 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2254 * Makefile.in: Regenerate.
2256 2000-06-20 H.J. Lu <hjl@gnu.org>
2258 * Makefile.am: Rebuild dependency.
2259 * Makefile.in: Rebuild.
2261 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2263 * Makefile.in, configure: regenerate
2264 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2266 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2268 * configure.in: Recognize m68hc12 and m68hc11.
2269 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2270 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2271 and opcode generation for m68hc11 and m68hc12.
2273 2000-06-16 Nick Duffek <nsd@redhat.com>
2275 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2276 bfd_mach_ppc_620 instead of 620.
2278 2000-06-12 Kazu Hirata <kazu@hxi.com>
2280 * h8300-dis.c: Fix formatting.
2281 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2284 2000-06-09 Denis Chertykov <denisc@overta.ru>
2286 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2288 2000-06-07 Denis Chertykov <denisc@overta.ru>
2290 * avr-dis.c: completely rewritten.
2292 2000-06-02 Kazu Hirata <kazu@hxi.com>
2294 * h8300-dis.c: Follow the GNU coding style.
2295 (bfd_h8_disassemble) Fix a typo.
2297 2000-06-01 Kazu Hirata <kazu@hxi.com>
2299 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2300 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2301 correctly. Fix a typo.
2303 2000-05-31 Nick Clifton <nickc@redhat.com>
2305 * opintl.h (_(String)): Explain why dgettext is used instead of
2308 2000-05-30 Nick Clifton <nickc@redhat.com>
2310 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2311 bindtextdomain): Replace defines with those from intl/libgettext.h
2312 to quieten gcc warnings.
2314 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2316 * Makefile.am: Update dependencies with "make dep-am"
2317 * Makefile.in: Regenerate.
2319 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2321 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2322 sign-extending operands.
2324 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2326 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2329 2000-05-21 Nick Clifton <nickc@redhat.com>
2331 * Makefile.am (LIBIBERTY): Define.
2333 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2335 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2336 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2337 (reg_names): Rename to std_reg_names. Change it to a char **
2339 (std_reg_names): New name for reg_names.
2340 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2343 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2345 * fr30-desc.h: Partially regenerated to account for changed
2346 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2347 * m32r-desc.h: Ditto.
2349 2000-05-15 Nick Clifton <nickc@redhat.com>
2351 * arm-opc.h: Use upper case for flasg in MSR and MRS
2352 instructions. Allow any bit to be set in the field_mask of
2353 the MSR instruction.
2355 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2356 field_mask of an MSR instruction.
2358 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2360 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2361 instructions changed to ldrsb/ldrsh.
2363 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2365 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2366 target addresses for 'jal' and 'j'.
2368 2000-05-10 Geoff Keating <geoffk@redhat.com>
2370 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2371 also available in common mode when powerpc syntax is being used.
2373 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2375 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2376 (dummy_print_address): Ditto.
2378 2000-05-04 Timothy Wall <twall@redhat.com>
2380 * tic54x-opc.c: New.
2381 * tic54x-dis.c: New.
2382 * disassemble.c (disassembler): Add ARCH_tic54x.
2383 * configure.in: Added tic54x target.
2385 * Makefile.am: Add tic54x dependencies.
2386 * Makefile.in: Ditto.
2388 2000-05-03 J.T. Conklin <jtc@redback.com>
2390 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2391 vector unit operands.
2392 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2393 unit instruction formats.
2394 (PPCVEC): New macro, mask for vector instructions.
2395 (powerpc_operands): Add table entries for above operand types.
2396 (powerpc_opcodes): Add table entries for vector instructions.
2398 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2399 (print_insn_little_powerpc): Likewise.
2400 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2402 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2404 * configure.in: Add bfd_powerpc_64_arch.
2405 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2408 2000-04-24 Nick Clifton <nickc@redhat.com>
2410 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2413 2000-04-23 Denis Chertykov <denisc@overta.ru>
2415 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2417 (reg_fmul_r): New. Extract source register from FMUL instruction.
2418 (reg_muls_d): New. Extract destination register from MULS instruction.
2419 (reg_muls_r): New. Extract source register from MULS instruction.
2420 (reg_movw_d): New. Extract destination register from MOVW instruction.
2421 (reg_movw_r): New. Extract source register from MOVW instruction.
2422 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2423 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2425 2000-04-22 Timothy Wall <twall@redhat.com>
2427 * ia64-gen.c (general): Add an ordered table of primary
2428 opcode names, as well as priority fields to disassembly data
2429 structures to enforce a preferred disassembly format based on the
2430 ordering of the opcode tables.
2431 (load_insn_classes): Show a useful message if IC tables are missing.
2432 (load_depfile): Ditto.
2433 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2434 distinguish preferred disassembly.
2435 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2436 format. Fix incorrect flag on fma.s/fma.s.s0.
2437 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2438 the highest priority.
2439 * ia64-opc-b.c: Use more abbreviations.
2440 * ia64-asmtab.c: Regenerate.
2442 2000-04-21 Jason Eckhardt <jle@redhat.com>
2444 * hppa-dis.c (extract_16): New function.
2445 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2446 new operand types l,y,&,fe,fE,fx.
2448 2000-04-21 Richard Henderson <rth@redhat.com>
2449 David Mosberger <davidm@hpl.hp.com>
2450 Timothy Wall <twall@redhat.com>
2451 Bob Manson <manson@charmed.cygnus.com>
2452 Jim Wilson <wilson@redhat.com>
2454 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2455 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2456 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2458 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2459 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2460 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2461 * Makefile.in: Rebuild.
2462 * configure Rebuild.
2463 * configure.in (bfd_ia64_arch): New target.
2464 * disassemble.c (ARCH_ia64): Define.
2465 (disassembler): Support ARCH_ia64.
2466 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2467 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2468 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2469 ia64-war.tbl, ia64-waw.tbl: New files.
2471 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2473 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2474 (disassemble): Use them.
2476 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2478 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2479 * Makefile.am: Update dependencies.
2480 * Makefile.in: Regenerate.
2482 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2484 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2485 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2486 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2487 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2488 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2489 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2490 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2491 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2492 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2493 ansidecl.h as sysdep.h includes it.
2495 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2497 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2498 --enable-build-warnings option.
2499 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2500 * Makefile.in, configure: Re-generate.
2502 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2504 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2505 stc GBR,@-<REG_N> is available for arch_sh1_up.
2506 Group parallel processing insn with identical mnemonics together.
2507 Make three-operand psha / pshl come first.
2509 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2511 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2512 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2513 (sh_arg_type): Add A_PC.
2514 (sh_table): Update entries using immediates. Add repeat.
2515 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2516 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2518 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2520 * po/opcodes.pot: Regenerate.
2522 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2523 (DEP): Quote when passing vars to sub-make. Add warning message
2525 (DEP1): Rewrite for "gcc -MM".
2526 (CLEANFILES): Add DEP2.
2527 Update dependencies.
2528 * Makefile.in: Regenerate.
2530 2000-04-03 Denis Chertykov <denisc@overta.ru>
2532 * avr-dis.c: Syntax cleanup.
2533 (add0fff): Print the pc relative address as a signed number.
2534 (add03f8): Likewise.
2536 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2538 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2539 the parameter ATTRIBUTE_UNUSED.
2540 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2542 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2544 * m10300-opc.c: SP-based offsets are always unsigned.
2546 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2548 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2549 [branch always] instead of "undefined".
2551 2000-03-27 Nick Clifton <nickc@redhat.com>
2553 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2554 short instructions, from end of list of long instructions.
2556 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2558 * Makefile.am (CFILES): Add avr-dis.c.
2559 (ALL_MACHINES): Add avr-dis.lo.
2561 2000-03-27 Alan Modra <alan@linuxcare.com>
2563 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2565 (print_insn_avr): Call function via pointer in K&R compatible way.
2566 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2567 add0fff, add03f8): Convert to old style function declaration and
2569 (avrdis_opcode): Add prototype.
2571 2000-03-27 Denis Chertykov <denisc@overta.ru>
2573 * avr-dis.c: New file. AVR disassembler.
2574 * configure.in (bfd_avr_arch): New architecture support.
2575 * disassemble.c: Likewise.
2576 * configure: Regenerate.
2578 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2580 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2582 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2584 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2585 flag to determine if operand is pc-relative.
2587 (d30v_format_table):
2588 (REL6S3): Renamed from IMM6S3.
2589 Added flag OPERAND_PCREL.
2590 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2591 added flag OPERAND_PCREL.
2592 (IMM12S3U): Replaced with REL12S3.
2593 (SHORT_D2, LONG_D): Delay target is pc-relative.
2594 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2595 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2596 using the REL* operands.
2597 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2598 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2599 LONG_Db, using REL* operands.
2600 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2601 (d30v_opcode_table): Use new *r formats.
2603 2000-02-28 Nick Clifton <nickc@redhat.com>
2605 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2606 'signed_overflow_ok_p'.
2608 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2610 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2611 name of the libtool directory.
2612 * Makefile.in: Rebuild.
2614 2000-02-24 Nick Clifton <nickc@redhat.com>
2616 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2617 (cgen_clear_signed_overflow_ok): New function.
2618 (cgen_signed_overflow_ok_p): New function.
2620 2000-02-23 Andrew Haley <aph@redhat.com>
2622 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2623 m32r-ibld.c, m32r-opc.h: Rebuild.
2625 2000-02-23 Linas Vepstas <linas@linas.org>
2627 * i370-dis.c, i370-opc.c: New.
2629 * disassemble.c (ARCH_i370): Define.
2630 (disassembler): Handle it.
2632 * Makefile.am: Add support for Linux/IBM 370.
2633 * configure.in: Likewise.
2635 * Makefile.in: Regenerate.
2636 * configure: Likewise.
2638 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2640 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2641 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2644 2000-02-22 Andrew Haley <aph@redhat.com>
2646 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2648 * mips-opc.c (G6): New define.
2649 (mips_builtin_op): Add "move" definition for -gp32.
2651 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2653 From Grant Erickson <gerickso@Brocade.COM>:
2654 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2656 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2658 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2661 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2663 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2664 (print_insn_ppi): Likewise.
2665 (print_insn_shx): Use info->mach to select appropriate insn set.
2666 Add support for sh-dsp. Remove FD_REG_N support.
2667 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2668 (sh_arg_type): Likewise. Remove FD_REG_N.
2669 (sh_dsp_reg_nums): New enum.
2670 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2671 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2672 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2673 (arch_sh3_dsp_up): Likewise.
2674 (sh_opcode_info): New field: arch.
2675 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2676 D_REG_N. Fill in arch field. Add sh-dsp insns.
2678 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2680 * arm-dis.c: Change flavor name from atpcs-special to
2681 special-atpcs to prevent name conflict in gdb.
2682 (get_arm_regname_num_options, set_arm_regname_option,
2683 get_arm_regnames): New functions. API to access the several
2684 flavor of register names. Note: Used by gdb.
2685 (print_insn_thumb): Use the register name entry from the currently
2686 selected flavor for LR and PC.
2688 2000-02-10 Nick Clifton <nickc@redhat.com>
2690 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2692 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2693 "mulsh.h" instructions.
2694 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2696 (print_insn_mcore): Add support for little endian targets.
2697 Add support for MULSH and OPSR classes.
2699 2000-02-07 Nick Clifton <nickc@redhat.com>
2701 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2702 Previous delat did not take.
2704 2000-02-03 Timothy Wall <twall@redhat.com>
2706 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2707 to adjust target address bounds checking and calculate the
2708 appropriate octet offset into data.
2710 2000-01-27 Nick Clifton <nickc@redhat.com>
2712 * arm-dis.c: (parse_disassembler_option): Rename to
2713 parse_arm_disassembler_option and allow to be exported.
2715 * disassemble.c (disassembler_usage): New function: Print out any
2716 target specific disassembler options.
2717 Call arm_disassembler_options() if the ARM architecture is being
2720 * arm-dis.c (NUM_ELEM): Define this macro if not already
2722 (arm_regname): New struct type for ARM register names.
2723 (arm_toggle_regnames): Delete.
2724 (parse_disassembler_option): Use register name structure.
2725 (print_insn): New function: Combines duplicate code found in
2726 print_insn_big_arm and print_insn_little_arm.
2727 (print_insn_big_arm): Call print_insn.
2728 (print_insn_little_arm): Call print_insn.
2729 (print_arm_disassembler_options): Display list of supported,
2730 ARM specific disassembler options.
2732 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2734 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2735 ARM_STT_16BIT flag as Thumb code symbols.
2737 * arm-dis.c (printf_insn_little_arm): Ditto.
2739 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2741 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2742 of raw thumb instructions.
2744 2000-01-20 Nick Clifton <nickc@redhat.com>
2746 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2748 2000-01-03 Nick Clifton <nickc@cygnus.com>
2750 * arm-dis.c (streq): New macro.
2751 (strneq): New macro.
2752 (force_thumb): ew local variable.
2753 (parse_disassembler_option): New function: Parse a single, ARM
2754 specific disassembler command line switch.
2755 (parse_disassembler_option): Call parse_disassembler_option to
2756 parse individual command line switches.
2757 (print_insn_big_arm): Check force_thumb.
2758 (print_insn_little_arm): Check force_thumb.
2760 For older changes see ChangeLog-9899
2766 version-control: never
projects / deliverable / binutils-gdb.git / blob