1 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
3 * m32r-opc.h (HAVE_CPU_M32R): Define.
6 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
8 * dvp-dis.c, dvp-opc.c: New files.
9 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
10 * configure: Regenerate.
11 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
12 (dvp-dis.lo,dvp-opc.lo): Add rules for.
13 (mips-dis.lo): Compile with @archdefs@.
14 * Makefile.in: Regenerate.
15 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
16 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
19 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
21 * v850-opc.c (insertion routines): If both alignment and size is
22 wrong then report this.
24 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
26 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
27 Only recognize instructions for the current target_processor.
29 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
31 * d10v-dis.c (PC_MASK): Correct value.
32 (print_operand): If there's a reloc, don't calculate the
33 address because they could be in different sections.
36 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
38 * cgen.sh: Rewrite to be like simulator's version.
39 * Makefile.am (cgen): Update call to cgen.sh.
40 * Makefile.in: Regenerate
43 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
45 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
46 instruction after the 4650's "mul" instruction; nobody's using the
47 4010 these days. If object files someday indicate which processor
48 variant they're intended for, we can do a better job at this.
51 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
53 * mips-opc.c (c.lt.s): Add r5900 variant.
57 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
59 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
60 table provided entry size. Use CGEN_INSN_MNEMONIC.
61 (cgen_parse_keyword): Rewrite.
62 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
63 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
64 * cgen-opc.c: Clean up pass over `struct foo' usage.
65 (cgen_keyword_lookup_value): Handle "" entry.
66 (cgen_keyword_add): Likewise.
68 * Makefile.am: Add cgen support.
69 * Makefile.in: Regenerate.
70 * configure.in: Add cgen support.
71 * configure: Regenerate.
72 * aclocal.m4: Regenerate.
73 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
76 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
78 * mips-opc.c: Add FP_D to s.d instruction flags.
80 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
82 * m68k-opc.c (halt, pulse): Enable them on the 68060.
85 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
87 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
88 PC relative offset forms before the 15 bit forms. An assembler command
89 line option now chooses the default.
93 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
95 * mips-opc.c: Add many missing r5900 instructions.
99 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
101 * d30v-opc.c (d30v_opcode_table): Set new flags bits
102 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
105 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
107 * configure: Only build libopcodes shared if --enable-shared's value
108 was `yes', or was set to `*opcodes*'.
109 * aclocal.m4: Likewise.
110 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
111 original source of this bit of code. It's not clear what the best fix
115 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
117 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
120 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
122 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
123 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
124 offset forms before the 15 bit forms, to default to the long forms.
127 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
129 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
131 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
133 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
134 symbol if none is present.
135 (print_insn_big_arm): Prevent examination of stored symbol if
138 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
140 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
142 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
144 * disassemble.c: Remove disasm_symaddr() function.
146 * arm-dis.c: Use info->symbol instead of info->flags to determine
147 if disassmbly should be in Thumb or Arm mode.
149 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
151 * arm-dis.c: Add support for disassembling Thumb opcodes.
152 (print_insn_thumb): New function.
154 * disassemble.c (disasm_symaddr): New function.
156 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
157 (thumb_opcodes): Table of Thumb opcodes.
159 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
161 * m68k-opc.c (btst): Change Dd@s to Dd;b.
163 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
164 and 'v' as operand types.
166 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
168 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
169 <olivier.carmona@di.epfl.ch>.
170 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
171 which has a two word opcode with a one word argument.
174 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
176 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
177 unsigned, not signed.
178 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
182 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
184 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
185 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
186 (ftrv): Slay the cut-and-paste monster.
189 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
191 * d10v-dis.c (print_operand):
192 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
194 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
196 * d10v-opc.c (OPERAND_FLAG): Split into:
197 (OPERAND_FFLAG, OPERAND_CFLAG) .
201 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
203 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
204 field for all INSN_MACRO's.
207 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
209 * mips-opc.c (sync,cache): These are 3900 insns.
211 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
213 sh-opc.h (sh_table): Remove ftst/nan.
215 start-sanitize-vr5400
216 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
218 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
219 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
221 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
225 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
227 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
228 Add tx49 insns and configury.
231 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
233 * mips-opc.c (ffc, ffs): Fix mask.
236 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
238 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
242 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
244 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
245 start-sanitize-vr5400
246 Added VR5400 instructions.
247 (N5): New cpu-id macro.
249 (WR_HILO, RD_HILO, MOD_HILO): New macros.
251 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
253 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
254 (WR_HILO, RD_HILO, MOD_HILO): New macros.
256 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
258 * v850-dis.c (disassemble): Replace // with /* ... */
260 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
262 * sparc-opc.c: Add wr & rd for v9a asr's.
263 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
264 (v9a_asr_reg_names): New variable.
265 Patch from David Miller <davem@vger.rutgers.edu>.
267 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
269 * sparc-opc.c (v9notv9a): New insn type.
270 (IMPDEP): Move to the end to not conflict with edge8 et al.
271 Patch from David Miller <davem@vger.rutgers.edu>.
273 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
275 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
277 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
279 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
281 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
283 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
284 of disassemble_info structure to determine if an overlay address
285 has a matching symbol in low memory.
287 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
288 new symbol_at_address_func field in disassemble_info structure.
290 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
292 * v850-opc.c (extract_d22): Use signed arithmatic.
294 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
296 * mips-opc.c: Three op mult is not an ISA insn.
298 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
300 * mips-opc.c: Fix formatting.
302 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
304 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
305 than assuming that char is signed. Explicitly sign extend 16 bit
306 values, rather than assuming that short is 16 bits.
307 (OP_sI, OP_J, OP_DIR): Likewise.
310 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
312 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
316 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
318 * v850-opc.c: Fix typo in comment.
320 * v850-dis.c (disassemble): Add test of processor type when
323 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
325 * configure.in: Use a diversion to set enable_shared before the
326 arguments are parsed.
327 * configure: Rebuild.
329 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
331 * m68k-opc.c (TBL1): Use ! rather than `.
332 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
334 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
336 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
338 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
340 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
343 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
344 * aclocal.m4: Rebuild with new libtool.
345 * configure: Rebuild.
348 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
350 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
353 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
355 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
357 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
359 * v850-opc.c (v850_opcodes): Further rearrangements.
362 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
364 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
367 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
369 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
372 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
374 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
376 * mips16-opc.c: Added mips16 sdbbp.
379 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
381 * v850-opc.c: Initialise processors field of v850_opcode structure.
384 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
386 Merge changes from Martin Hunt:
388 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
390 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
391 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
392 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
394 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
396 * d30v-dis.c (print_insn): First operand of d*i (delayed
397 branch) instructions is relative.
399 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
400 (d30v_operand_table): Add IMM6S3 type.
401 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
403 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
404 and cmp instructions.
406 * d30v-opc.c: Correct entries for repeat*, and sat*.
407 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
408 types. Correct several formats.
410 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
412 * d30v-opc.c (pre_defined_registers): Change control registers.
414 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
415 SHORT_C2. Manual was incorrect.
417 * d30v-dis.c (lookup_opcode): Return value now indicates
418 if an opcode has a short and a long form. Used for deciding
419 to append a ".s" or ".l".
420 (print_insn): Append a ".s" to an instruction if it is
421 the short form and ".l" if it is a long form. Do not append
422 anything if the instruction has only one possible size.
424 * d30v-opc.c: Change mulx2h to require an even register.
425 New form: SHORT_A2; a SHORT_A form that needs an even
426 register as the first operand.
428 * d30v-dis.c (print_insn_d30v): Fix problem where the last
429 instruction was not being disassembled if there were an odd
430 number of instructions.
432 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
436 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
438 * v850-dis.c (disassemble): Improved display of register lists.
441 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
443 * sparc-opc.c (sparc_opcodes): Fix assembler args to
444 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
445 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
446 fandnot1s, fandnot2s.
448 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
450 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
452 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
454 * cgen-asm.c (cgen_parse_address): New argument resultp.
456 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
458 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
460 * mn10200-dis.c (disassemble): PC relative instructions are
461 relative to the next instruction, not the current instruction.
463 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
465 * v850-dis.c (disassemble): Only signed extend values that are not
466 returned by extract functions.
467 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
469 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
471 * v850-opc.c: Update comments. Remove use of
472 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
474 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
476 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
478 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
480 * configure: Rebuilt with latest devo autoconf for NT support.
482 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
484 * v850-dis.c (disassemble): Use curly brace syntax for register
487 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
488 where r0 is being used as a destination register.
491 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
493 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
497 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
499 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
500 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
501 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
502 Add insns to access SGR and DBR.
503 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
506 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
508 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
511 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
513 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
514 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
517 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
519 * configure (cgen_files): Add support for v850e target.
520 * configure.in (cgen_files): Add support for v850e target.
522 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
524 * configure (cgen_files): Add support for v850ea target.
525 * configure.in (cgen_files): Add support for v850ea target.
528 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
530 * configure.in (bfd_arc_arch): Add.
531 * configure: Rebuild.
532 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
533 * Makefile.in: Rebuild.
534 * arc-dis.c, arc-opc.c: New files.
535 * disassemble.c (ARCH_all): Define ARCH_arc.
536 (disassembler): Add ARC support.
538 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
541 * v850-dis.c (disassemble): Add support for v850EA instructions.
543 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
544 (v850_opcodes): Add v850EA instructions.
546 * v850-dis.c (disassemble): Add support for v850E instructions.
548 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
549 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
550 insert_spe, extract_spe): New Functions.
551 (v850_opcodes): Add v850E instructions.
554 * v850-opc.c: Reorganised and re-layed out to improve readability
557 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
559 * configure: Rebuild with autoconf 2.12.1.
561 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
563 * aclocal.m4, configure: Rebuild with new automake patches.
565 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
567 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
568 * acinclude.m4: Just include acinclude.m4 from BFD.
569 * aclocal.m4, configure: Rebuild.
571 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
573 * Makefile.am: New file, based on old Makefile.in.
574 * acconfig.h: New file.
575 * acinclude.m4: New file.
576 * stamp-h.in: New file.
577 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
578 Removed shared library handling; now handled by libtool. Replace
579 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
580 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
581 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
582 handling in AC_OUTPUT.
583 * dep-in.sed: Change .o to .lo.
584 * Makefile.in: Now built with automake.
585 * aclocal.m4: Now built with aclocal.
586 * config.in, configure: Rebuild.
588 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
590 * mips-opc.c: Fix typo/thinko in "eret" instruction.
593 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
595 * mips-opc.c: Fix coding of mtsa.
598 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
600 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
602 * sparc-dis.c (sorted_opcodes): New static local.
603 (struct opcode_hash): `opcode' is pointer to const element.
604 (build_hash): First arg is now table of sorted pointers.
605 (print_insn_sparc): Sort opcodes by sorting table of pointers.
606 (compare_opcodes): Update.
608 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
610 * cgen-opc.c: #include <ctype.h>.
611 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
612 Handle case insensitive hashing.
613 (hash_keyword_value): Change type of `value' to unsigned int.
615 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
617 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
618 precision FP, mark it as such. Likewise for double precision
619 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
622 (mips_builtin_opcodes): Remove non-existant r5900 instructions
626 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
628 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
629 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
632 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
634 * ppc-opc.c (extract_nsi): make unsigned expression signed before
636 (UNUSED): remove one level of parens, so MSVC doesn't choke on
637 nesting depth when all the macros are expanded.
639 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
641 * sparc-opc.c: The fcmp v9a instructions take an integer register
642 as a destination, not a floating point register. From Christian
643 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
645 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
647 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
648 syntax. From Roman Hodek
649 <rnhodek@faui22c.informatik.uni-erlangen.de>.
651 * i386-dis.c (twobyte_has_modrm): Fix pand.
653 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
655 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
657 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
659 * arm-dis.c: Add prototypes for arm_decode_shift and
662 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
664 * mips-opc.c: Add r3900 insns.
666 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
668 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
669 print delay slot instructions on the same line. When using a PC
670 relative load, add a comment with the value being loaded if it can
673 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
675 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
676 to pushS/popS for segment regs and byte constant so that
677 pushw/popw printed when in 16 bit data mode.
679 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
680 print cbtw, cwtd in 16 bit data mode.
681 * i386-dis.c (putop): extra case W to support above.
683 * i386-dis.c (print_insn_x86): print addr32 prefix when given
684 address size prefix in 16 bit address mode.
686 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
688 * sh-dis.c: Reindent. Rename local variable fprintf to
691 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
693 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
695 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
697 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
699 * mips16-opc.c (mip16_opcodes): same.
701 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
703 * m68k-opc.c (moveb): Change $d to %d.
705 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
707 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
708 (twobyte_has_modrm): Likewise.
710 (OP_MMX, OP_EM, OP_MS): New static functions.
712 * i386-dis.c: Revert patch of April 4. The output now matches
715 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
717 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
720 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
722 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
724 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
726 * Makefile.in (install): Depend upon installdirs.
727 (installdirs): New target.
729 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
731 From Thomas Graichen <graichen@rzpd.de>:
732 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
733 * configure: Rebuild.
735 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
737 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
738 Delete string{,s}.h support.
740 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
742 * cgen-asm.c (cgen_parse_operand_fn): New global.
743 (cgen_parse_{{,un}signed_integer,address}): Update call to
744 cgen_parse_operand_fn.
745 (cgen_init_parse_operand): New function.
746 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
747 from cgen_asm_init_parse.
748 (m32r_cgen_assemble_insn): New operand `errmsg'.
749 Delete call to as_bad, return error message to caller.
750 (m32r_cgen_asm_hash_keywords): #if 0 out.
752 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
754 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
756 [case 'J']: Fix typo in register name.
758 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
760 * configure.in: Substitute SHLIB_LIBS.
761 * configure: Rebuild.
762 * Makefile.in (SHLIB_LIBS): New variable.
763 ($(SHLIB)): Use $(SHLIB_LIBS).
765 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
767 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
769 * cgen-opc.c (hash_keyword_name): Improve algorithm.
771 * disassemble.c (disassembler): Handle m32r.
773 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
775 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
776 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
777 * Makefile.in (CFILES): Add them.
778 (ALL_MACHINES): Add them.
779 (dependencies): Regenerate.
780 * configure.in (cgen_files): New variable.
781 (bfd_m32r_arch): Add entry.
782 * configure: Regenerate.
784 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
786 * configure.in: Correct file names for bfd_mn10[23]00_arch.
787 * configure: Rebuild.
789 * Makefile.in: Rebuild dependencies.
791 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
793 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
796 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
798 * Branched binutils 2.8.
800 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
802 * m10200-dis.c: Rename from mn10200-dis.c.
803 * m10200-opc.c: Rename from mn10200-opc.c.
804 * m10300-dis.c: Rename from mn10300-dis.c
805 * m10300-opc.c: Rename from mn10300-opc.c.
806 * Makefile.in: Update accordingly.
808 * mips16-opc.c: Add mul and dmul macros.
810 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
812 * makefile.vms: Update CFLAGS, add clean target.
814 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
816 * mips-opc.c: Add "wait". From Ralf Baechle
817 <ralf@gnu.ai.mit.edu>.
819 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
820 * configure, config.in: Rebuild.
821 * sysdep.h: Include <stdlib.h> if it exists.
822 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
824 * Makefile.in: Rebuild dependencies.
826 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
828 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
829 Andrew Bray <andy@madhouse.demon.co.uk>.
831 * mips-opc.c: Add cast when setting mips_opcodes.
833 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
835 * v850-dis.c (disassemble): Fix sign extension problem.
836 * v850-opc.c (extract_d*): Fix sign extension problems to make
837 disassembly calculate branch offsets correctly.
839 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
841 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
843 * mips-opc.c: Add dctr and dctw.
846 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
848 * d30v-dis.c (print_insn): Change the way signed constants
851 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
853 * Makefile.in (BFD_H): New variable.
854 (HFILES): New variable.
855 (CFILES): Add all C files.
856 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
857 Delete old dependencies, and build new ones.
858 * dep-in.sed: New file.
860 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
862 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
864 start-sanitize-coldfire
865 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
867 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
870 end-sanitize-coldfire
871 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
873 * mn10200-opc.c: Change "trap" to "syscall".
874 * mn10300-opc.c: Add new "syscall" instruction.
876 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
878 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
879 mulul insns on the coldfire.
881 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
883 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
884 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
885 (print_insn_little_arm): Likewise.
887 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
889 Based on patches from H.J. Lu <hjl@lucon.org>:
890 * i386-dis.c (fetch_data): Add prototype.
891 * m68k-dis.c (fetch_data): Add prototype.
892 (dummy_print_address): Add prototype. Make static.
893 * ppc-opc.c (valid_bo): Add prototype.
894 * sparc-dis.c (build_hash_table): Add prototype.
895 (is_delayed_branch, compute_arch_mask): Add prototypes.
896 (print_insn_sparc): Make several local variables const.
897 (compare_opcodes): Change arguments to const PTR. Add prototype.
898 * sparc-opc.c (arg): Change name field to be const.
899 (lookup_name, lookup_value): Add prototypes. Change table and
900 name parameters to be const.
901 (sparc_encode_asi): Change name parameter to be const.
902 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
903 (sparc_encode_sparclet_cpreg): Likewise.
904 (sparc_decode_asi): Change return type to be const.
905 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
906 (sparc_decode_sparclet_cpreg): Likewise.
908 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
910 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
911 Solaris doesn't like the combined options, and the -f is
913 (stamp-tshlink, install): Likewise.
915 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
917 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
920 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
922 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
924 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
926 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
929 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
931 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
934 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
936 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
938 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
940 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
943 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
945 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
946 floatformat_to_double to make portable.
947 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
950 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
952 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
953 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
955 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
957 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
958 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
961 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
963 * tic80-opc.c (LSI_SCALED): Renamed from this ...
964 (OFF_SL_BR_SCALED): ... to this, and added the flag
965 TIC80_OPERAND_BASEREL to the flags word.
966 (tic80_opcodes): Replace all occurances of LSI_SCALED with
970 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
972 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
973 Change mips_opcodes from const array to a pointer,
974 and change bfd_mips_num_opcodes from const int to int,
975 so that we can increase the size of the mips opcodes table
979 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
981 * tic80-opc.c (tic80_predefined_symbols): Revert change to
982 store BITNUM values in the table in one's complement form
983 to match behavior when assembler is given a raw numeric
984 value for a BITNUM operand.
985 * tic80-dis.c (print_operand_bitnum): Ditto.
989 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
991 * d30v-opc.c: Removed references to FLAG_X.
994 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
996 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
999 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1001 * Makefile.in: Added d30v object files.
1002 * configure: (bfd_d30v_arch) Rebuilt.
1003 * configure.in: (bfd_d30v_arch) Added new case.
1004 * d30v-dis.c: New file.
1005 * d30v-opc.c: New file.
1006 * disassemble.c (disassembler) Add entry for d30v.
1009 start-sanitize-tic80
1010 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1012 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1013 representations for the floating point BITNUM values.
1015 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1017 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1018 in the table in one's complement form, as they appear in the
1020 (tic80_symbol_to_value): Use macros to access predefined
1022 (tic80_value_to_symbol): Ditto.
1023 (tic80_next_predefined_symbol): New function.
1024 * tic80-dis.c (print_operand_bitnum): Remove code that did
1025 one's complement for BITNUM values.
1028 start-sanitize-r5900
1029 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1031 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1034 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1036 * makefile.vms: Remove 8 bit characters. Update to latest
1039 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1041 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1043 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1045 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1046 (IMM24_PCREL): Likewise.
1048 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1050 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1051 address for an extended PC relative instruction that is not a
1054 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1056 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1059 start-sanitize-tic80
1060 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1062 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1063 (tic80_opcodes): Sort entries so that long immediate forms
1064 come after short immediate forms, making it easier for
1065 assembler to select the right one for a given operand.
1068 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1070 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1072 (print_insn_mips16): Likewise.
1074 start-sanitize-r5900
1075 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1077 * mips-opc.c: add r5900.
1080 start-sanitize-tic80
1081 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1083 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1084 a symbol class that restricts translation to just that
1085 class (general register, condition code, etc).
1087 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1089 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1090 and REG_DEST_E for register operands that have to be
1091 an even numbered register. Add REG_FPA for operands that
1092 are one of the floating point accumulator registers.
1093 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1094 (tic80_opcodes): Change entries that need even numbered
1095 register operands to use the new operand table entries.
1096 Add "or" entries that are identical to "or.tt" entries.
1099 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1101 * mips16-opc.c: Add new cases of exit instruction for
1103 * mips-dis.c (print_mips16_insn_arg): Display floating point
1104 registers in operands of exit instruction. Print `$' before
1105 register names in operands of entry and exit instructions.
1107 start-sanitize-tic80
1108 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1110 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1111 pairs for all predefined symbols recognized by the assembler.
1112 Also used by the disassembling routines.
1113 (tic80_symbol_to_value): New function.
1114 (tic80_value_to_symbol): New function.
1115 * tic80-dis.c (print_operand_control_register,
1116 print_operand_condition_code, print_operand_bitnum):
1117 Remove private tables and use tic80_value_to_symbol function.
1120 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1122 * d10v-dis.c (print_operand): Change address printing
1123 to correctly handle PC wrapping. Fixes PR11490.
1125 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1127 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1130 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1132 * mips-dis.c (print_insn_mips16): Set insn_info information.
1133 (print_mips16_insn_arg): Likewise.
1135 * mips-dis.c (print_insn_mips16): Better handling of an extend
1136 opcode followed by an instruction which can not be extended.
1138 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1140 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1141 coldfire moveb instruction to not allow an address register as
1142 destination. Although the documentation does not indicate that
1143 this is invalid, experiments uncovered unexpected behavior.
1144 Added a comment explaining the situation. Thanks to Andreas
1145 Schwab for pointing this out to me.
1147 start-sanitize-tic80
1148 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1150 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1151 entries are presorted so that entries with the same mnemonic are
1152 adjacent to each other in the table. Sort the entries for each
1153 instruction so that this is true.
1156 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1158 * m68k-dis.c: Include <libiberty.h>.
1159 (print_insn_m68k): Sort the opcode table on the most significant
1160 nibble of the opcode.
1162 start-sanitize-tic80
1163 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1165 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1166 "vsub", "vst", "xnor", and "xor" instructions.
1167 (V_a1): Renamed from V_a, msb of accumulator reg number.
1168 (V_a0): Add macro, lsb of accumulator reg number.
1170 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1172 * tic80-dis.c (print_insn_tic80): Broke excessively long
1173 function up into several smaller ones and arranged for
1174 the instruction printing function to be callable recursively
1175 to print vector instructions that have both a load and a
1176 math instruction packed into a single opcode.
1177 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1178 to explain why it comes after the other vector opcodes.
1181 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1183 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1184 move insns to handle immediate operands.
1186 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1188 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1189 fix operand mask in the "moveml" entries for the coldfire.
1191 start-sanitize-tic80
1192 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1194 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1195 New macros for building vector instruction opcodes.
1196 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1197 FMT_LI, which were unused. The field is now a flags field.
1198 Remove some opcodes that are possible, but illegal, such
1199 as long immediate instructions with doubles for immediate
1200 values. Add "vadd" and "vld" instructions.
1202 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1204 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1205 the order more logical. Move the shift alias instructions ("rotl",
1206 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1207 interspersed with the regular sr.x and sl.x instructions. Add
1208 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1209 "sub", "subu", "swcr", and "trap".
1211 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1213 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1214 (OFF_SL_PC): Renamed from OFF_SL.
1215 (OFF_SS_BR): New operand type for base relative operand.
1216 (OFF_SL_BR): New operand type for base relative operand.
1217 (REG_BASE): New operand type for base register operand.
1218 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1219 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1220 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1222 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1223 10 char field, padded with spaces on rhs, rather than a string
1224 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1225 than old TIC80_OPERAND_RELATIVE. Add support for new
1226 TIC80_OPERAND_BASEREL flag bit.
1228 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1230 * tic80-dis.c (print_insn_tic80): Print floating point operands
1232 * tic80-opc.c (SPFI): Add single precision floating point
1233 immediate operand type.
1234 (ROTATE): Add rotate operand type for shifts.
1235 (ENDMASK): Add for shifts.
1236 (n): Macro for the 'n' bit.
1237 (i): Macro for the 'i' bit.
1238 (PD): Macro for the 'PD' field.
1239 (P2): Macro for the 'P2' field.
1240 (P1): Macro for the 'P1' field.
1241 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1245 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1247 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1248 adding in current address for pc-relative operands.
1250 start-sanitize-tic80
1251 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1253 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1254 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1255 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1256 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1257 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1258 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1259 (REG_SCALED, LSI_SCALED): New operand types.
1260 (E): New macro for 'E' bit at bit 27.
1261 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1262 opcodes, including the various size flavors (b,h,w,d) for
1263 the direct load and store instructions.
1265 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1267 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1269 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1270 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1271 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1272 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1273 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1274 masks with "MASK_* & ~M_*" to get the M bit reset.
1275 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1277 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1279 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1280 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1281 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1283 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1284 CC, SICR, and LICR table entries.
1285 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1286 "bcnd", and "brcr" opcodes.
1289 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1291 * ppc-opc.c (powerpc_operands): Make comment match the
1292 actual fields (no shift field).
1293 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1294 start-sanitize-tic80
1295 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1296 partial implementation, work in progress.
1297 * tic80-opc.c (tic80_operands): Begin construction operands table.
1298 (tic80_opcodes): Continue populating opcodes table and start
1299 filling in the operand indices.
1300 (tic80_num_opcodes): Add this.
1303 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1305 * m68k-opc.c: Add #B case for moveq.
1307 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1309 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1310 before they are used.
1312 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1314 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1315 for "breakpoint" instruction.
1317 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1319 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1320 (dep): Use ALL_CFLAGS rather than CFLAGS.
1322 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1324 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1327 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1329 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1330 start-sanitize-tic80
1331 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1334 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1336 * mips16-opc.c: Add "abs".
1338 start-sanitize-tic80
1339 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1341 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1342 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1343 (disassembler): Add bfd_arch_tic80 support to set disassemble
1344 to print_insn_tic80.
1345 * tic80-dis.c (print_insn_tic80): Add stub.
1347 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1349 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1350 * configure: Regenerate with autoconf.
1351 * tic80-dis.c: Add file.
1352 * tic80-opc.c: Add file.
1355 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1357 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1359 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1361 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1362 (mn10200_opcodes): Use it for some logicals and btst insns.
1363 Add "break" and "trap" instructions.
1365 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1367 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1369 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1371 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1372 relative load or add now depends upon whether the instruction is
1375 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1377 * mn10200-dis.c: Finish writing disassembler.
1378 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1379 Fix mask for "jmp (an)".
1381 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1382 handle endianness issues for mn10300.
1384 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1386 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1388 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1389 instruction. Fix opcode field for "movb (imm24),dn".
1391 * mn10200-opc.c (mn10200_operands): Fix insertion position
1394 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1396 * mn10200-opc.c: Create mn10200 opcode table.
1397 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1398 but moving along nicely.
1400 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1402 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1404 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1406 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1407 specifiers for fmovem* instructions.
1409 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1411 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1413 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1415 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1418 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1420 * mn10300-opc.c: Add some comments explaining the various
1423 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1425 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1427 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1430 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1431 operand specifiers in fmovm* instructions.
1433 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1435 * ppc-opc.c (insert_li): Give an error if the offset has the two
1436 least significant bits set.
1438 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1440 * mips-dis.c (print_insn_mips16): Separate the instruction from
1441 the arguments with a tab, not a space.
1443 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1445 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1448 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1451 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1453 * configure: Rebuild with autoconf 2.12.
1455 Add support for mips16 (16 bit MIPS implementation):
1456 * mips16-opc.c: New file.
1457 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1458 (mips16_reg_names): New static array.
1459 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1460 after seeing a 16 bit symbol.
1461 (print_insn_little_mips): Likewise.
1462 (print_insn_mips16): New static function.
1463 (print_mips16_insn_arg): New static function.
1464 * mips-opc.c: Add jalx instruction.
1465 * Makefile.in (mips16-opc.o): New target.
1466 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1467 * configure: Rebuild.
1469 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1471 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1472 operand specifiers in *save, *restore and movem* instructions.
1474 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1477 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1478 register operands for immediate arithmetic, not, neg, negx, and
1479 set according to condition instructions.
1481 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1482 specifier of the effective-address operand in immediate forms of
1483 arithmetic instructions. The specifier for the immediate operand
1484 notes how and where the constant will be stored.
1486 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1488 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1491 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1494 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1496 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1498 * mn10300-dis.c (disassemble): Handle register lists.
1500 * mn10300-opc.c: Fix handling of register list operand for
1501 "call", "ret", and "rets" instructions.
1503 * mn10300-dis.c (disassemble): Print PC-relative and memory
1504 addresses symbolically if possible.
1505 * mn10300-opc.c: Distinguish between absolute memory addresses,
1506 pc-relative offsets & random immediates.
1508 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1510 (disassemble): Handle SPLIT and EXTENDED operands.
1512 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1514 * mn10300-dis.c: Rough cut at printing some operands.
1516 * mn10300-dis.c: Start working on disassembler support.
1517 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1519 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1521 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1523 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1525 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1527 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1529 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1530 register argument is calls and jmp instructions.
1532 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1534 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1535 getx operand. Fix opcode for mulqu imm,dn.
1537 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1539 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1540 in MN10300_OPERAND_SPLIT operands for how many bits
1541 appear in the basic insn word. Add IMM32_HIGH24,
1542 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1543 (mn10300_opcodes): Use new operands as needed.
1545 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1546 for bset, bclr, btst instructions.
1547 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1549 * mn10300-opc.c (mn10300_operands): Remove many redundant
1550 operands. Update opcode table as appropriate.
1551 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1552 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1554 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1556 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1557 operands (for indexed load/stores). Fix bitpos for DI
1558 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1559 few instructions that insert immediates/displacements in the
1560 middle of the instruction. Add IMM8E for 8 bit immediate in
1561 the extended part of an instruction.
1562 (mn10300_operands): Use new opcodes as appropriate.
1564 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1566 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1567 sequential so the assembler never parallelizes it with
1570 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1572 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1573 a data/address register that appears in register field 0
1574 and register field 1.
1575 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1577 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1579 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1580 standard disassembly.
1582 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1583 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1584 Recategorize PALcode instructions.
1586 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1588 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1590 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1592 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1593 there are no operand types.
1595 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1597 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1599 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1601 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1603 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1605 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1607 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1608 and sst.w instructions.
1610 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1613 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1615 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1618 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1620 * ppc-opc.c (PPCPWR2): Define.
1621 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1624 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1626 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1627 field for movhu instruction.
1629 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1630 cast value to "long" not "signed long" to keep hpux10
1633 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1635 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1638 * mn10300-opc.c (FMT*): Remove definitions.
1640 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1641 for shift-by-register opcodes.
1643 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1644 into [AD][MN][01] for encoding the position of the register
1647 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1649 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1650 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1652 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1654 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1655 Fix various typos. Add "PAREN" operand.
1656 (MEM, MEM2): Define.
1657 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1658 operands. Fix several typos.
1660 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1663 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1665 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1666 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1668 (mn10300_opcodes): Break opcode format out into its own field.
1669 Update many operand fields to deal with signed vs unsigned
1670 issues. Fix one or two typos in the "mov" instruction
1671 opcode, mask and/or operand fields.
1673 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1675 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1676 m68851 wasn't reset.
1678 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1680 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1681 all opcodes. Very rough cut at operands for all opcodes.
1683 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1686 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1688 * mn10200-opc.c, mn10300-opc.c: New files.
1689 * mn10200-dis.c, mn10300-dis.c: New files.
1690 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1691 * disassemble.c: Break mn10x00 support into 10200 and 10300
1693 * configure.in: Likewise.
1694 * configure: Rebuilt.
1696 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1698 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1700 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1702 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1704 * disassemble (ARCH_mn10x00): Define.
1705 (disassembler): Handle bfd_arch_mn10x00.
1706 * configure.in: Recognize bfd_mn10x00_arch.
1707 * configure: Rebuilt.
1709 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1711 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1712 accordingly. Don't declare functions using op_rtn.
1714 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1716 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1717 params to be more standard.
1718 * (disassemble): Print absolute addresses and symbolic names for
1719 branch and jump targets.
1720 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1722 * (v850_opcodes): Add breakpoint insn.
1724 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1726 * m68k-opc.c: Move the fmovemx data register cases before the
1727 other cases, so that they get recognized before the data register
1728 does gets treated as a degenerate register list.
1730 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1732 * mips-opc.c: Add a case for "div" and "divu" with two registers
1733 and a destination of $0.
1735 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1737 * mips-dis.c (print_insn_arg): Add prototype.
1738 (_print_insn_mips): Ditto.
1740 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1742 * mips-dis.c (print_insn_arg): Print condition code registers as
1745 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1747 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1749 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1751 * v850-dis.c (disassemble): Make static. Provide prototype.
1753 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1755 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1758 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1760 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1761 ']' characters into the output stream.
1762 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1763 Add "memop" field to all opcodes (for the disassembler).
1764 Reorder opcodes so that "nop" comes before "mov" and "jr"
1765 comes before "jarl".
1767 * v850-dis.c (print_insn_v850): Fix typo in last change.
1769 * v850-dis.c (print_insn_v850): Properly handle disassembling
1770 a two byte insn at the end of a memory region when the memory
1771 region's size is only two byte aligned.
1773 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1775 * v850-dis.c (v850_reg_names): Define.
1776 (v850_sreg_names, v850_cc_names): Likewise.
1777 (disassemble): Very rough cut at printing operands (unformatted).
1779 * v850-opc.c (BOP_MASK): Fix.
1780 (v850_opcodes): Fix mask for jarl and jr.
1782 * v850-dis.c: New file. Skeleton for disassembler support.
1783 * Makefile.in Remove v850 references, they're not needed here.
1784 * configure.in: Add v850-dis.o when building v850 toolchains.
1785 * configure: Rebuilt.
1786 * disassemble.c (disassembler): Call v850 disassembler.
1788 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1789 (insert_d8_6, extract_d8_6): New functions.
1790 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1791 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1793 (IF4A, IF4B): Use "D7" instead of "D7S".
1794 (IF4C, IF4D): Use "D8_7" instead of "D8".
1795 (IF4E, IF4F): New. Use "D8_6".
1796 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1797 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1799 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1800 (v850_operands): Change D16 to D16_15, use special insert/extract
1801 routines. New new D16 that uses the generic insert/extract code.
1802 (IF7A, IF7B): Use D16_15.
1803 (IF7C, IF7D): New. Use D16.
1804 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1806 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1807 message. Issue an error if the branch offset is odd.
1809 * v850-opc.c: Add notes about needing special insert/extract
1810 for all the load/store insns, except "ld.b" and "st.b".
1812 * v850-opc.c (insert_d22, extract_d22): New functions.
1813 (v850_operands): Use insert_d22 and extract_d22 for
1815 (insert_d9): Fix range check.
1817 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1819 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1820 and set bits field to D9 and D22 operands.
1822 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1824 * v850-opc.c (v850_operands): Define SR2 operand.
1825 (v850_opcodes): "ldsr" uses R1,SR2.
1827 * v850-opc.c (v850_opcodes): Fix opcode specs for
1828 sld.w, sst.b, sst.h, sst.w, and nop.
1830 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1832 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1833 end of the opcode table.
1835 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1837 * d10v-opc.c (pre_defined_registers): Added register pairs,
1838 "r0-r1", "r2-r3", etc.
1840 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1842 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1843 Create I16U for an unsigned 16bit mmediate operand.
1844 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1846 * v850-opc.c (v850_operands): Define EP operand.
1847 (IF4A, IF4B, IF4C, IF4D): Use EP.
1849 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1850 with immediate operand, "movhi". Tweak "ldsr".
1852 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1853 correct. Get sld.[bhw] and sst.[bhw] closer.
1855 * v850-opc.c (v850_operands): "not" is a two byte insn
1857 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1859 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1861 * v850-opc.c (two): Get order of words correct.
1863 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1865 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1866 register source and destination operands.
1867 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1869 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1870 same thinko in "trap" opcode.
1872 * v850-opc.c (v850_opcodes): Add initializer for size field
1875 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1876 Add D8 for 8-bit unsigned field in short load/store insns.
1877 (IF4A, IF4D): These both need two registers.
1878 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1879 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1880 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1881 for "ldsr" and "stsr".
1882 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1885 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1886 short store word (sst.w).
1888 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1890 * v850-opc.c (v850_operands): Added insert and extract fields,
1891 pointers to functions that handle unusual operand encodings.
1893 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1895 * v850-opc.c (v850_opcodes): Enable "trap".
1897 * v850-opc.c (v850_opcodes): Fix order of displacement
1898 and register for "set1", "clr1", "not1", and "tst1".
1900 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1902 * v850-opc.c (v850_operands): Add "B3" support.
1903 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1906 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1908 * v850-opc.c: Close unterminated comment.
1910 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1912 * v850-opc.c (v850_operands): Add flags field.
1913 (v850_opcodes): add move opcodes.
1915 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1917 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1918 * configure: (bfd_v850v_arch) Add new case.
1919 * configure.in: (bfd_v850_arch) Add new case.
1920 * v850-opc.c: New file.
1922 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1924 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1926 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1928 * d10v-opc.c: Add additional information to the opcode
1929 table to help determinine which instructions can be done
1932 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1934 * mpw-make.sed: Update editing of include pathnames to be
1937 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1939 * arm-opc.h: Added "bx" instruction definition.
1941 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1943 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1945 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1947 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1949 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1951 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1953 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1955 * makefile.vms: Update for alpha-opc changes.
1957 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1959 * i386-dis.c (print_insn_i386): Actually return the correct value.
1960 (ONE, OP_ONE): #ifdef out; not used.
1962 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1964 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1965 Changed subi operand type to treat 0 as 16.
1967 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1969 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1972 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1974 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1975 memory transfer instructions. Add new format string entries %h and %s.
1976 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1979 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1981 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1982 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1984 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1986 * alpha-dis.c (print_insn_alpha_osf): Remove.
1987 (print_insn_alpha_vms): Remove.
1988 (print_insn_alpha): Make globally visible. Chose the register
1989 names based on info->flavour.
1990 * disassemble.c: Always return print_insn_alpha for the alpha.
1992 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1994 * d10v-dis.c (dis_long): Handle unknown opcodes.
1996 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1998 * d10v-opc.c: Changes to support signed and unsigned numbers.
1999 All instructions with the same name that have long and short forms
2000 now end in ".l" or ".s". Divs added.
2001 * d10v-dis.c: Changes to support signed and unsigned numbers.
2003 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2005 * d10v-dis.c: Change all functions to use info->print_address_func.
2007 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2009 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2010 move ccr/sr insns more strict so that the disassembler only
2011 selects them when the addressing mode is data register.
2013 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2014 * d10v-opc.c (pre_defined_registers): Declare.
2015 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2016 to pick a better name for the registers.
2018 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2020 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2021 operands for fexpand and fpmerge. From Christian Kuehnke
2022 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2024 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2026 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2027 print routine. Take new regnames and cpumask arguments.
2028 Kill the environment variable nonsense.
2029 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2030 (print_insn_alpha_vms): New function. Do VMS style regnames.
2031 * disassemble.c (disassembler): Test bfd flavour to pick
2032 between OSF and VMS routines. Default to OSF.
2034 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2036 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2037 * configure: Rebuild.
2038 * Makefile.in (install): Use @INSTALL_SHLIB@.
2040 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2042 * configure: (bfd_d10v_arch) Add new case.
2043 * configure.in: (bfd_d10v_arch) Add new case.
2044 * d10v-dis.c: New file.
2045 * d10v-opc.c: New file.
2046 * disassemble.c (disassembler) Add entry for d10v.
2048 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2050 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2051 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2053 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2055 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2056 distinguish between variants of the instruction set.
2057 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2058 distinguish between variants of the instruction set.
2060 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2062 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2063 the 8086 instruction set.
2064 * i386-dis.c: General cleanups. Make most things static. Add
2065 prototypes. Get rid of static variables aflags and dflags. Pass
2066 them as args (to almost everything).
2068 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2070 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2072 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2074 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2075 if the next arg is marked with SRC_IN_DST. Gross.
2077 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2078 we're looking for and find EXR.
2080 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2081 if we're looking for KBIT and we don't find it.
2083 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2086 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2087 3bit immediate operands.
2089 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2091 * Released binutils 2.7.
2093 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2094 <kkaempf@progis.ac-net.de>.
2096 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2098 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2100 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2102 * sparc-dis.c (print_insn_sparclite): New routine to print
2103 sparclite instructions.
2105 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2107 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2109 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2111 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2112 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2113 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2115 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2117 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2118 Use autoconf-set values.
2119 (docdir, oldincludedir): Removed.
2120 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2122 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2124 * alpha-opc.c: New file.
2125 * alpha-opc.h: Remove.
2126 * alpha-dis.c: Complete rewrite to use new opcode table.
2127 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2128 * configure: Rebuild with autoconf 2.10.
2129 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2130 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2132 (alpha-opc.o): New target.
2134 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2136 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2137 Set imm_added_to_rs1 even if the source and destination register
2140 * sparc-opc.c: Add some two operand forms of the wr instruction.
2142 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2144 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2147 * disassemble.c (disassembler): Handle H8/S.
2148 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2150 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2152 * sparc-opc.c: Add beq/teq as aliases for be/te.
2154 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2155 <sergei@msil.sps.mot.com>.
2157 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2159 * makefile.vms: New file.
2161 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2163 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2165 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2168 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2170 * i386-dis.c (OP_OFF): Call append_prefix.
2172 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2174 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2175 unsigned long to silence a warning from the Solaris PowerPC
2178 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2180 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2182 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2184 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2186 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2187 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2188 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2189 cpush, cpusha, cpull sparclet insns.
2191 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2193 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2195 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2197 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2198 Set F_FLOAT on other floating point instructions.
2200 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2202 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2204 (powerpc_opcodes): Add 860/821 specific SPRs.
2206 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2208 * configure.in: Permit --enable-shared to specify a list of
2209 directories. Set and substitute BFD_PICLIST.
2210 * configure: Rebuild.
2211 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2212 uses. Set to @BFD_PICLIST@.
2214 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2216 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2217 not "abs", which may be needed for the absolute in something
2218 like btst #0,@10:8. Print L_3 immediates separately from other
2219 immediates. Change ABSMOV reference to ABS8MEM.
2221 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2223 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2224 (current_arch_mask): New static global.
2225 (compute_arch_mask): New static function.
2226 (print_insn_sparc): Delete sparc_v9_p. New static local
2227 current_mach. Resort opcode table if current_mach changes.
2228 Generalize "insn not supported" test.
2229 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2230 Delete test for v9/!v9.
2231 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2233 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2234 (brfcx): Renamed to FBRX.
2235 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2236 coprocessor mnemonics are not supported on the sparclet).
2237 (condf): Renamed to CONDF.
2238 (SLCBCC2): Delete F_ALIAS flag.
2240 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2242 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2243 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2245 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2247 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2248 that the shared library version number is set correctly.
2250 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2252 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2253 Miles Bader <miles@gnu.ai.mit.edu>.
2254 * configure: Rebuild.
2256 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2258 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2261 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2263 * configure: Rebuild with autoconf 2.8.
2265 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2267 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2268 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2270 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2272 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2273 since they appear as targets in Makefile.in.
2274 * configure: Rebuild.
2276 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2278 * mpw-make.sed: Edit out shared library support bits.
2280 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2282 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2283 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2284 (sparc_opcodes): Add sparclet insns.
2285 (sparclet_cpreg_table): New static local.
2286 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2287 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2289 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2291 * i386-dis.c (index16): New static variable.
2292 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2294 (OP_indirE): Return result of OP_E.
2295 (OP_E): Check for 16 bit addressing mode, and disassemble
2296 correctly. Optimised 32 bit case a little. Don't print
2297 "(base,index,scale)" when sib specifies only an offset.
2299 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2301 * configure.in: Set and substitute SHLIB_DEP.
2302 * configure: Rebuild.
2303 * Makefile.in (SHLIB_DEP): New variable.
2304 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2305 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2306 COMMON_SHLIB, add them to piclist with appropriate modifications.
2307 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2308 here: just use piclist.
2310 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2312 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2313 (print_insn_sparc): Rewrite v9/not-v9 tests.
2314 (compare_opcodes): Likewise.
2315 * sparc-opc.c (MASK_<ARCH>): Define.
2316 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2317 (sparclet,v6notv9): Define.
2318 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2319 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2321 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2323 * configure.in: Call AC_PROG_CC before configure.host.
2324 * configure: Rebuild.
2326 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2328 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2330 * i386-dis.c (onebyte_has_modrm): New static array.
2331 (twobyte_has_modrm): New static array.
2332 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2334 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2336 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2339 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2341 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2344 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2346 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2347 m68010up, not just m68020up | cpu32.
2349 * Makefile.in (SONAME): New variable.
2350 ($(SHLINK)): Make a link to the transformed name, as well.
2351 (stamp-tshlink): New target.
2352 (install): Skip stamp-tshlink during install.
2354 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2356 * configure.in: Call AC_ARG_PROGRAM.
2357 * configure: Rebuild.
2358 * Makefile.in (program_transform_name): New variable.
2359 (install): Transform library name before installing it.
2361 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2363 * i960-dis.c (mem): Add HX dcinva instruction.
2365 Support for building as a shared library, based on patches from
2366 Alan Modra <alan@spri.levels.unisa.edu.au>:
2367 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2368 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2369 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2370 * configure: Rebuild.
2371 * Makefile.in (ALLLIBS): New variable.
2372 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2373 (COMMON_SHLIB, SHLINK): New variables.
2374 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2375 (STAGESTUFF): Remove variable.
2376 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2377 (stamp-piclist, piclist): New targets.
2378 ($(SHLIB), $(SHLINK)): New targets.
2379 ($(OFILES)): Depend upon stamp-picdir.
2380 (disassemble.o): Build twice if PICFLAG is set.
2381 (MOSTLYCLEAN): Add pic/*.o.
2382 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2383 (distclean): Remove pic and stamp-picdir.
2384 (install): Install shared libraries.
2385 (stamp-picdir): New target.
2387 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2389 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2390 Print unknown instruction as "unknown", rather than in hex.
2392 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2394 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2396 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2398 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2400 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2402 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2403 when necessary. From Ulrich Drepper
2404 <drepper@myware.rz.uni-karlsruhe.de>.
2406 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2408 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2409 sparc_num_opcodes. Update architecture enum values.
2410 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2411 (sparc_opcode_lookup_arch): New function.
2412 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2413 (sparc_opcodes): Add v9a shutdown insn.
2415 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2417 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2418 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2420 (print_insn_sparc64): Deleted.
2421 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2424 * sparc-opc.c (architecture_pname): Add v9a.
2426 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2428 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2429 incorrectly defined as 0x16 when it should be 0x15.
2430 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2431 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2432 excb (exception barrier) which is defined in the Alpha
2433 Architecture Handbook version 2.
2434 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2435 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2436 disassembled as or, for example.
2438 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2440 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2441 (_print_insn_mips): Change i from int to unsigned int.
2443 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2445 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2446 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2448 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2450 * i386-dis.c: Added Pentium Pro instructions.
2452 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2454 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2457 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2459 * sh-opc.h (sh_nibble_type): Added REG_B.
2460 (sh_arg_type): Added A_REG_B.
2461 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2463 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2465 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2467 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2469 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2471 * Makefile.in (distclean): Remove stamp-h. From Ronald
2472 F. Guilmette <rfg@monkeys.com>.
2474 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2476 From David Mosberger-Tang <davidm@azstarnet.com>:
2477 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2480 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2482 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2483 (sh_table): Added many SH3 opcodes.
2484 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2486 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2488 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2489 (subco,subco.): Mark this PPC, not PPCCOM.
2491 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2493 * configure: Rebuild with autoconf 2.7.
2495 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2497 * configure: Rebuild with autoconf 2.6.
2499 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2501 * configure.in: Sort list of architectures. Accept but do nothing
2502 for alliant, convex, pyramid, romp, and tahoe.
2504 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2506 * a29k-dis.c (print_special): Change num to unsigned int.
2508 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2510 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2513 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2515 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2516 * configure: Rebuilt.
2518 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2520 * configure.in: Add case for bfd_i860_arch.
2521 * configure: Rebuild.
2523 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2525 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2526 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2527 (NEXTDOUBLE): Likewise.
2528 (print_insn_m68k): Don't match fmoveml if there is more than one
2529 register in the list.
2530 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2532 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2534 * m68k-opc.c: Use #W rather than #w.
2535 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2537 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2539 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2540 and likewise for all the dbxx opcodes.
2542 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2544 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2546 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2548 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2549 the VR4100 specific instructions to the mips_opcodes structure.
2551 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2553 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2554 ugly Metrowerks bug in CW6, is fixed in CW7.
2556 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2558 * ppc-opc.c (whole file): Add flags for common/any support.
2560 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2562 * Makefile.in (BISON): Remove macro.
2563 (FLAGS_TO_PASS): Remove BISON.
2565 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2567 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2569 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2570 instructions that take no args by looking at the match mask.
2571 (print_insn_arg): Always print "%" before register names.
2572 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2573 [case '_']: Don't print "@#" before address.
2574 [case 'J']: Use "%s" as format string, not register name.
2575 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2577 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2579 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2582 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2584 From David Mosberger-Tang <davidm@azstarnet.com>
2586 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2587 (alpha_insn_set): added definitions for VAX floating point
2588 instructions (Unix compilers don't generate these, but handcoded
2589 assembly might still use them).
2591 * alpha-dis.c (print_insn_alpha): added support for disassembling
2592 the miscellaneous instructions in the Alpha instruction set.
2594 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2596 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2597 no longer create sysdep.h, sed ppc-opc.c to work around a
2598 serious Metrowerks C bug.
2599 * mpw-make.in: Remove.
2600 * mpw-make.sed: New file, used by mpw-configure to edit
2601 Makefile.in into an MPW makefile.
2603 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2605 * Makefile.in (maintainer-clean): New synonym for realclean.
2607 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2609 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2610 which use '0', '1', and '2' instead. Specify the proper size for
2611 a pmove immediate operand. Correct the pmovefd patterns to be
2612 moves to a register, not from a register.
2613 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2615 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2617 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2618 %psr, %wim, %tbr as F_NOTV9.
2620 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2622 * Makefile.in (Makefile): Just rebuild Makefile when running
2624 (config.h, stamp-h): New targets.
2625 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2626 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2627 rebuilding config.h.
2628 * configure: Rebuild.
2630 * mips-opc.c: Change unaligned loads and stores with "t,A"
2631 operands to use "t,A(b)".
2633 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2635 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2637 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2639 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2640 until 3 instead of until 2.
2642 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2644 * Makefile.in (ALL_CFLAGS): Define.
2645 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2646 (MOSTLYCLEAN): Add config.log.
2647 (distclean): Don't remove config.log.
2648 * configure.in: Substitute HDEFINES.
2649 * configure: Rebuild.
2651 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2653 * sh-opc.h (sh_arg_type): Add F_FR0.
2654 (sh_table, case fmac): Add F_FR0 as first argument.
2656 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2658 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2660 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2662 * sparc-dis.c: Remove all references to NO_V9.
2664 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2666 * aclocal.m4: Just include ../bfd/aclocal.m4.
2667 * configure: Rebuild.
2669 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2671 * sparc-dis.c (X_DISP19): Define.
2672 (print_insn, case 'G'): Use it.
2673 (print_insn, case 'L'): Sign extend displacement.
2675 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2677 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2678 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2679 host_makefile_frag or frags.
2680 * aclocal.m4: New file.
2681 * configure: Rebuild.
2682 * Makefile.in (INSTALL): Set to @INSTALL@.
2683 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2684 (INSTALL_DATA): Set to @INSTALL_DATA@.
2686 (AR_FLAGS): Set to rc rather than qc.
2687 (CC): Define as @CC@.
2688 (CFLAGS): Set to @CFLAGS@.
2689 (@host_makefile_frag@): Remove.
2690 (config.status): Remove dependency upon @frags@.
2692 * configure.in: ../bfd/config.bfd now just sets shell variables.
2693 Use them rather than looking through target Makefile fragments.
2694 * configure: Rebuild.
2696 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2698 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2700 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2702 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2703 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2706 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2707 (lookup_{name,value}): New functions.
2708 (prefetch_table): New static local.
2709 (sparc_{encode,decode}_prefetch): New functions.
2710 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2712 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2714 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2717 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2719 * sh-dis.c: Correct comment on first line of file.
2721 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2723 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2725 * sparc-opc.c (asi, membar): New static locals.
2726 (sparc_{encode,decode}_{asi,membar}): New functions.
2727 (sparc_opcodes, membar insn): Fix.
2728 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2729 Support decoding of membar masks.
2732 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2734 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2736 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2738 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2739 and likewise for the other branches. Add bhs as an alias for bcc,
2740 and likewise for the size variants. Add dbhs as an alias for
2743 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2745 * sh-opc.h (FP sts instructions): Update to match reality.
2747 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2749 * m68k-dis.c: (fpcr_names): Add % before all register names.
2750 (reg_names): Likewise.
2751 (print_insn_arg): Don't explicitly print % before register names.
2752 Add % before register names in static array names. In case 'r',
2753 print data registers as `@(Dn)', not `Dn@'. When printing a
2754 memory address, don't print @# before it.
2755 (print_indexed): Change base_disp and outer_disp from int to
2756 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2757 syntax. Sign extend 8 byte displacement correctly.
2758 (print_base): Print using MIT syntax. Print zpc when appropriate.
2759 Change parameter disp from int to bfd_vma.
2761 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2764 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2766 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2767 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2768 * sh-opc.h (sh_arg_type): Add new operand types.
2769 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2771 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2773 * Makefile.in (distclean): Remove generated file config.h.
2775 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2777 * Makefile.in (distclean): Remove generated file config.h.
2779 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2781 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2783 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2785 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2786 rather than numopcodes. Use m68k_opcodes rather than removed
2787 opcode function. Don't check F_ALIAS.
2788 (print_insn_arg): Change first parameter to be const char *.
2789 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2790 (m68k-opc.o): New target.
2791 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2792 * configure: Rebuild.
2794 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2796 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2797 (opcode_bits, opcode_hash_table): New variables.
2798 (opcodes_initialized): Renamed from opcodes_sorted.
2799 (build_hash_table): New function.
2800 (is_delayed_branch): Use hash table.
2801 (print_insn): Renamed from print_insn_sparc, made static.
2802 Build and use hash table. If !sparc64, ignore sparc64 insns,
2803 and vice-versa if sparc64.
2804 (print_insn_sparc, print_insn_sparc64): New functions.
2805 (compare_opcodes): Move sparc64 opcodes to end.
2806 Print commutative insns with constant second.
2807 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2809 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2811 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2812 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2813 avoids printing a delay slot in a delay slot.
2814 * sh-opc.h (sh_table): Fully bracket last entry.
2816 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2818 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2820 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2822 * configure.in: Get host_makefile_frag from ${srcdir}.
2824 * configure.in: Autoconfiscated. Check for string[s].h. Create
2825 config.h from config.in. Don't set up sysdep.h link.
2826 * sysdep.h: New file.
2827 * configure, config.in: New files, generated from configure.in.
2828 * Makefile.in: Updated to be processed autoconf-style.
2829 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2830 (Makefile): Depend on config.status.
2831 (config.status): New rule.
2832 * configure.bat: Update Makefile substitutions.
2834 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2836 * mips-opc.c (L1): Define.
2837 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2838 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2841 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2843 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2844 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2845 have multiple add units but only a single logical unit.
2847 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2848 shifted by 18, without any insertion or extraction function.
2849 (insert_cr, extract_cr): Remove.
2851 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2853 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2856 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2858 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2859 * sh-opc.h: Add copyright.
2861 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2863 * Makefile.in (crunch-m68k): Delete extra target accidentally
2864 checked in a while ago.
2866 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2868 * sh-opc.h (sh_table): Add SH3 support.
2870 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2872 * sh-opc.h: Added bsrf and braf.
2874 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2876 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2877 bogus [ls]fm{ea,fd} patterns.
2879 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2880 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2881 initialize it from memory. Make function static.
2882 (print_insn_{big,little}_arm): New functions.
2883 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2884 the correct endianness.
2886 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2888 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2891 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2893 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2894 17th, so that it builds again using GCC as the compiler.
2896 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2898 * mips-dis.c (print_insn_little_mips): Cast return value from
2899 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2900 expects an unsigned long, and that might be fewer words of
2901 argument storage (e.g., if bfd_vma is long long on a 32-bit
2903 (print_insn_big_mips): Likewise with bfd_getb32 value.
2904 (_print_insn_mips): Now static.
2906 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2908 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2909 gcc memory hog problem with initializer is fixed.
2911 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2913 Merge in support for Mac MPW as a host.
2914 (Old change descriptions retained for informational value.)
2916 * mpw-config.in (archname): Compute from the config.
2917 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2919 * mpw-config.in (target_arch): Compute from canonical target.
2920 (m68k, mips, powerpc, sparc): Add architectures.
2921 * mpw-make.in (disassemble.c.o): Add.
2922 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2924 * mpw-config.in (BFD_MACHINES): Set to a default value.
2925 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2927 * mpw-make.in (CSEARCH): Add extra-include to search path.
2929 * mpw-config.in (varargs.h): Don't create.
2930 (sysdep.h): Create using forward-include.
2931 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2933 * mpw-config.in: New file, MPW version of configure.in.
2934 * mpw-make.in: New file, MPW version of Makefile.in.
2936 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2938 * alpha-dis.c (print_insn_alpha): Put empty statement after
2941 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2943 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2944 (low_sign_extend): Likewise.
2945 (get_field): Delete unused function.
2946 (set_field, deposit_14, deposit_21): Likewise.
2948 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2950 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2953 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2955 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2957 * alpha-opc.h (OSF_ASMCODE): define
2958 print pal-code names as defined in App C of the
2959 Alpha Architecture Reference Manual
2961 * alpha-dis.c: cleaned up output
2962 print stylized code forms as defined in App A.4.3 of the
2963 Alpha Architecture Reference Manual
2965 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2967 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2969 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2972 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2974 * m68k-dis.c (opcode): New function. Returns address of opcode
2975 table entry given index, even if the opcode table was split to
2976 work around gcc bugs.
2977 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2979 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2980 (reg_names): Now const.
2981 (print_insn_arg): Arrays cacheFieldName and names now const.
2982 (print_indexed): Array scales now const.
2984 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2986 * ppc-opc.c: Sort recently added instructions by minor opcode
2987 number within major opcode number.
2989 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2991 * hppa-dis.c: Include libhppa.h.
2993 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2995 * mips-opc.c: Change dli to use M_DLI, and add dla.
2997 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2999 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3001 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3003 * mips-opc.c: Add r4650 mul instruction.
3005 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3007 * mips-opc.c: Add uld and usd macros for unaligned double load and
3010 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3012 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3013 mfdcr, mtdcr, icbt, iccci.
3015 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3017 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3018 signed char fields to shorts, more portable.
3020 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3022 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3023 char fields as signed chars, since they may have negative values.
3025 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3027 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3028 (mycroft@netbsd.org).
3030 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3032 From "Logg, Ed" <elogg@ea.com>:
3033 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3034 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3037 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3039 * ppc-opc.c: Changes based on patch from David Edelsohn
3040 <edelsohn@mhpcc.edu>.
3041 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3044 (insert_tbr): New static function.
3045 (extract_tbr): New static function.
3046 (XFXFXM_MASK, XFXM): Define.
3047 (XSPRBAT_MASK, XSPRG_MASK): Define.
3048 (powerpc_opcodes): Add instructions to access special registers by
3049 name. Add mtcr and mftbu.
3051 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3053 * mips-opc.c (P3): Define.
3054 (mips_opcodes): Add mad and madu.
3056 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3058 * configure.in: Add W65 support.
3059 * disassemble.c: Likewise.
3060 * w65-opc.h, w65-dis.c: New files.
3062 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3064 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3067 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3069 * mips-opc.c: Add dli as a synonym for li.
3071 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3073 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3074 print something for reserved opcode values, even if it won't
3077 * mips-dis.c (_print_insn_mips): When initializing, shift right
3078 and mask, to avoid sign extension problems on the Alpha.
3080 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3083 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3085 * sh-opc.h (mov.l gbr): Get direction right.
3086 * sh-dis.c (print_insn_shx): New function.
3087 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3088 print opcodes with right byte order.
3090 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3092 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3093 to avoid conflicts with getopt.
3095 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3097 * hppa-dis.c (print_insn_hppa): Read the instruction using
3098 bfd_getb32, so that it works on a little endian or 64 bit host.
3099 Remove unused local variable op.
3101 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3103 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3104 addu does not work correctly if -mips3.
3106 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3108 * a29k-dis.c (print_special): Add special register names defined
3109 on 29030, 29040 and 29050.
3110 (print_insn): Handle new operand type 'I'.
3112 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3114 * Makefile.in (INSTALL): Use top level install.sh script.
3116 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3118 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3119 that it works on a little endian host.
3121 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3123 * configure.in: Use ${config_shell} when running config.bfd.
3125 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3127 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3129 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3131 * a29k-dis.c (print_insn): Print the opcode.
3133 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3135 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3137 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3139 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3141 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3143 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3144 which store a value into memory.
3146 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3148 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3149 * arm-dis.c, arm-opc.h: New files.
3151 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3153 * Makefile.in (ns32k-dis.o): Add dependency.
3154 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3155 string, not as array of chars.
3157 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3159 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3161 * sparc-opc.c: Added sparclite extended FP operations, and
3162 versions of v9 impdep* instructions permitting specification of
3165 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3167 * i960-dis.c (reg_names): Now const.
3168 (struct sparse_tabent): New type, copied from array type in mem
3170 (ctrl): Local static array ctrl_tab now const.
3171 (cobr): Local static array cobr_tab now const.
3172 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3173 static variable mem_tab no longer explicitly initialized. Changed
3174 mem_init to const array of struct sparse_tabent.
3175 (reg): Local static variable reg_tab no longer explicitly
3176 initialized. Changed reg_init to const array of struct
3178 (ea): Local static array scale_tab now const.
3180 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3183 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3185 * configure.bat: the disassember needs to be enabled for
3186 "objdump -d" to work in djgpp.
3188 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3190 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3191 (invalid_float): Enabled general version, doesn't require running
3192 on ns32k host. Changed to take char* argument, and test for
3193 explicitly specified sizes, instead of using sizeof() on host CPU
3195 (INVALID_FLOAT): Cast first argument.
3196 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3197 list_P032, list_M032): Now const.
3198 (optlist, list_search): Made appropriate arguments now point to
3200 (print_insn_arg): Changed static array of one-character-string
3201 pointers into a static const array of characters; fixed sprintf
3202 statement accordingly.
3204 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3206 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3207 from distribution. A ns32k-dis.c from a previous distribution has
3208 been brought up to date and supports the new interface.
3210 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3212 * configure.in: add bfd_ns32k_arch target support.
3214 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3215 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3217 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3219 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3222 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3224 * h8300-dis.c, mips-dis.c: Don't use true and false.
3226 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3228 * configure.in: Change --with-targets to --enable-targets.
3230 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3232 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3233 opcodes to the first instruction with that opcode, to speed
3234 disassembly of large files. From ralphc@pyramid.com (Ralph
3237 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3239 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3241 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3243 * configure.bat: update to latest makefile.in
3245 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3247 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3248 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3249 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3250 slot insn is in a delay slot.
3251 * z8k-opc.h: (resflg): Fix patterns.
3252 * h8500-opc.h Fix CR insn patterns.
3254 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3256 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3257 "cmpl" before POWER versions, so that gas -many uses them.
3259 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3261 * disassemble.c: New file.
3262 * Makefile.in (OFILES): Add disassemble.o.
3263 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3264 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3265 binutils/configure.in.
3267 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3268 opcode being examined.
3270 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3272 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3273 (insert_ral, insert_ram, insert_ras): New functions.
3274 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3275 RAS for store with update.
3277 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3279 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3280 (edelsohn@npac.syr.edu).
3282 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3284 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3287 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3289 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3291 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3293 * ppc-opc.c (powerpc_operands): The signedp field has been
3294 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3295 instead. Add new operand SISIGNOPT.
3296 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3297 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3298 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3301 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3303 * i386-dis.c (struct private): Renamed to dis_private. `private'
3304 is a reserved word for dynix cc.
3306 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3308 * configure.in: Change error message to refer to bfd/config.bfd
3309 rather than bfd/configure.in.
3311 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3313 * ppc-opc.c: Define POWER2 as short alias flag.
3314 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3317 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3319 * i960-dis.c (print_insn_i960): Don't read a second word for
3320 opcodes 0, 1, 2 and 3.
3322 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3324 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3326 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3328 * m68881-ext.c: Removed; no longer used.
3329 * Makefile.in: Changed accordingly.
3331 * m68k-dis.c (ext_format_68881): Don't declare.
3332 (print_insn_m68k): If an instruction uses place 'i', it uses at
3333 least four fixed bytes.
3334 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3335 extended float, convert to double using floatformat_to_double, not
3336 ieee_extended_to_double, and fetch the data before converting it.
3338 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3340 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3341 davidj@ICSI.Berkeley.EDU (David Johnson).
3343 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3345 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3346 PowerPC uses bdnz[l][a].
3348 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3350 * dis-buf.c, i386-dis.c: Include sysdep.h.
3352 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3354 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3356 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3357 by Motorola PowerPC 601 with PPC_OPCODE_601.
3358 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3359 Disassemble Motorola PowerPC 601 instructions as well as normal
3360 PowerPC instructions.
3362 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3364 * i960-dis.c (reg, mem): Just use a static array instead of
3367 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3369 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3370 condition name index if this is for a negated condition.
3372 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3373 Floating point format for 'H' operand is backwards from normal
3374 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3375 operands (fmpyadd and fmpysub), handle bizarre register
3376 translation correctly for single precision format.
3378 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3379 or 'I' operands if the next format specifier is 'M' (fcmp
3380 condition completer).
3382 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3384 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3385 single number giving a bitmask for the MB and ME fields of an M
3386 form instruction. Change NB to accept 32, and turn it into 0;
3387 also turn 0 into 32 when disassembling. Seperated SH from NB.
3388 (insert_mbe, extract_mbe): New functions.
3389 (insert_nb, extract_nb): New functions.
3390 (SC_MASK): Mask out SA and LK bits.
3391 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3392 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3393 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3394 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3395 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3396 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3397 (powerpc_macros): Define table of macro definitions.
3398 (powerpc_num_macros): Define.
3400 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3401 if PPC_OPERAND_NEXT is set.
3403 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3405 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3406 char. Retrieve contents using bfd_getl32 instead of shifting.
3408 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3410 * ppc-opc.c: New file. Opcode table for PowerPC, including
3411 opcodes for POWER (RS/6000).
3412 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3413 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3414 (CFILES): Add ppc-dis.c.
3415 (ppc-dis.o, ppc-opc.o): New targets.
3416 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3418 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3420 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3421 No space before 'u', 'f', or 'N'.
3423 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3425 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3426 farther than we should.
3428 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3430 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3432 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3434 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3436 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3437 needs it, to prevent reading past the end of a section.
3439 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3441 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3442 Removed t,A case for la; always use t,A(b) case.
3444 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3446 From Ted Lemen <mellon@pepper.ncd.com>
3447 * mips-dis.c (print_insn_arg): Handle 'k'.
3448 * mips-opc.c: Make cache use k, not t.
3450 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3452 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3453 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3454 FLOAT_FORMAT_CODE to put out floating point register names.
3456 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3458 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3460 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3462 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3464 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3466 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3467 larger than 32. Moved dsxx32 variants first for disassembler.
3469 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3471 * z8kgen.c, z8k-opc.h: Add full lda information.
3473 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3475 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3476 movb instructions. Any necessary space will be emitted by
3477 the code to handle nullification completers.
3479 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3481 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3483 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3485 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3486 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3488 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3490 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3492 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3494 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3495 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3497 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3499 * m88k-dis.c (m88kdis): comment change. Remove space after
3501 (printop): handle new arg types DEC and XREG for m88110.
3503 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3505 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3506 type for absolute branch addresses. Delete special
3507 "ble" and "be" code in 'W' operand code.
3509 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3511 * mips-opc.c: Set hazard information correctly for branch
3512 likely instructions.
3514 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3516 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3517 info->fprintf_func for printing and info->print_address_func for
3520 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3522 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3524 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3526 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3527 Corrected second case of "b" for disassembler.
3529 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3531 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3532 to BFD swapping routines to correspond to BFD name changes.
3534 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3536 * mips-opc.c: Change div machine instruction to be z,s,t rather
3537 than s,t. Change div macro to be d,v,t rather than d,s,t.
3538 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3539 rem and remu which generates only the corresponding div
3540 instruction. This is for compatibility with the MIPS assembler,
3541 which only generates the simple machine instruction when an
3542 explicit destination of $0 is used.
3543 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3545 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3547 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3548 WR_31 hazard for bal, bgezal, bltzal.
3550 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3552 * hppa-dis.c (print_insn_hppa): Use print function
3553 from within the disassemble_info, not fprintf_filtered.
3555 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3557 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3558 Law, law@cs.utah.edu.)
3560 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3562 * mips-opc.c ("absu"): Removed.
3565 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3567 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3568 Changed hazard information to distinguish between memory load
3569 delays and coprocessor load delays.
3571 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3573 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3575 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3577 * configure.in: Don't pass cpu to config.bfd.
3579 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3581 * m88k-dis.c (m88kdis): Make class unsigned.
3583 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3585 * alpha-dis.c (print_insn_alpha): One branch format case was
3586 missing the instruction name.
3588 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3590 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3591 Add the arch-specific auxiliary files.
3592 (OFILES): Remove the arch-specific auxiliary files
3593 and use BFD_MACHINES instead of DIS_LIBS.
3594 * configure.in: Set BFD_MACHINES based on --with-targets option.
3596 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3598 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3601 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3603 * sparc-opc.c: Change CONST to const to deal with gcc
3604 -Dconst=__const -traditional.
3606 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3608 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3609 coprocessor instructions out of #if 0, and made them use new
3612 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3614 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3616 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3618 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3619 instruction, for use by the disassembler.
3621 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3622 hand-coded sign extensions that depended on 32-bit host ints.
3623 FIXME, we still depend on big-endian host bitfield ordering.
3624 (sparc_print_insn): Set the insn_info_valid field, and the
3625 other fields that describe the instruction being printed.
3627 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3629 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3630 `jmp' instead of just one of them.
3632 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3634 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3635 (fput_fp_reg_r): Renamed from fput_reg_r.
3636 (fput_fp_reg): New function.
3637 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3639 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3641 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3643 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3645 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3647 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3648 don't output a space.
3650 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3652 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3654 * mips-opc.c: New file, containing opcode table from
3655 ../include/opcode/mips.h.
3656 * Makefile.in: Add it.
3658 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3660 * m88k-dis.c: New file, moved in from gdb and changed to use the
3661 new dis-asm.h disassembler interface.
3662 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3663 (m88k-dis.o): New target.
3665 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3667 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3668 argument string const char * to correspond to opcode/mips.h.
3670 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3672 * mips-dis.c: Updated to account for name changes in new version
3674 * Makefile.in: Added header file dependencies.
3676 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3678 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3680 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3682 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3683 extend, rather than shifts.
3685 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3687 * Makefile.in: Undo 15 June change.
3689 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3691 * m68k-dis.c (print_insn_arg): Change return value to byte count
3693 * m68k-dis.c: Re-write to detect invalid operands before
3694 printing anything, so we can handle this the same way we
3695 handle invalid opcodes.
3697 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3699 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3701 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3703 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3706 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3708 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3710 * configure.in: Do make sysdep.h link.
3711 * Makefile.in: Search ../include. Don't search ../bfd.
3713 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3715 Changes from Jeff Law, law@cs.utah.edu:
3716 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3717 Do not print a space before the completers specified by
3720 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3722 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3723 defined, since gdb has been fixed.
3725 Changes from Jeff Law, law@cs.utah.edu:
3726 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3727 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3728 be a *disassemble_info, not a *FILE.
3729 * hppa-dis.c: Support 'd', '!', and 'a'.
3730 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3731 * hppa-dis.c: Delete cases which are no longer needed.
3733 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3735 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3737 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3739 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3742 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3744 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3745 * configure.in: No longer need to configure to get sysdep.h.
3747 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3749 * Patches from Jeffrey Law <law@cs.utah.edu>.
3750 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3751 templates for 1.1 FP computational instructions.
3753 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3755 * h8500-dis.c (print_insn_h8500): Address argument is type
3757 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3760 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3761 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3763 * sparc-dis.c (compare_opcodes): Move static declaration to
3766 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3768 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3769 instruction, remove unimp hack from 'l' argument.
3771 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3773 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3776 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3778 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3779 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3782 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3784 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3785 arrays of string pointers to 2-d arrays of chars, to save
3788 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3790 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3791 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3793 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3795 * hppa-dis.c: New file from Utah, adapted to new disassembler
3797 * Makefile.in: Include it.
3799 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3801 * sh-dis.c, sh-opc.h: New files.
3803 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3805 * alpha-dis.c, alpha-opc.h: New files.
3807 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3809 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3812 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3814 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3816 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3818 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3821 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3823 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3824 and double percent signs a few places.
3826 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3828 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3829 Use info->print_address_func not print_address.
3831 * dis-buf.c (generic_print_address): New function.
3833 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3835 * Makefile.in: Add sparc-dis.c.
3836 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3838 Add `add' instruction to the set that get checked
3839 for a preceding `sethi' in order to print an absolute address.
3840 * (print_insn): Disassembly prefers real instructions.
3841 (is_delayed_branch): Speed up.
3842 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3843 Still missing some float ops, and needs testing.
3844 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3845 F_ALIAS. Use printf, not fprintf, when not passing a file
3847 (compare_opcodes): Check that identical instructions have
3848 identical opcodes, complain otherwise.
3851 * Include reg_names.
3853 Use dis-asm.h/read_memory_func interface.
3855 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3857 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3858 deliberately return non-zero to setjmp from longjmp. Otherwise
3859 this code fails to compile.
3861 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3863 * m68k-dis.c: Fix prototype for fetch_arg().
3865 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3867 * dis-buf.c: New file, for new read_memory_func interface.
3868 Makefile.in (OFILES): Include it.
3869 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3870 Use new read_memory_func interface.
3872 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3874 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3875 * h8500-opc.h: Fix couple of opcodes.
3877 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3879 * Makefile.in: add dvi & installcheck targets
3881 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3883 * Makefile.in: Update for h8500-dis.c.
3885 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3887 * h8500-dis.c, h8500-opc.h: New files
3889 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3891 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3892 ../include/dis-asm.h.
3893 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3894 and ../gdb/m68k-pinsn.c).
3895 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3896 and ../gdb/i386-pinsn.c).
3897 * m68881-ext.c: New file. Moved definition of
3898 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3899 * Makefile.in: Adjust for new files.
3900 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3901 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3902 can be dis-assembled.
3904 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3906 * mips-dis.c (print_insn_arg): Now returns void.
3908 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3910 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3911 files that use the macros.
3913 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3915 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3916 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3917 (CFILES): Added mips-dis.c.
3919 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3921 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3922 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3924 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3926 * Makefile.in: Improve *clean rules.
3927 * configure.in: Allow a default host.
3929 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3931 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3932 files include other sysdep files
3934 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3936 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3938 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3940 * configure.in: For host support, use ../bfd/configure.host
3941 so it stays in sync with the ../bfd/hosts database.
3943 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3945 * configure.in: use cpu-vendor-os triple instead of nested cases
3947 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3949 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3950 *always* the wrong one.
3952 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3954 * z8kgen.c: added copyright info
3956 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3958 * z8k-dis.c (unparse_instr): prettier tabs
3959 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3961 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3963 * configure.in: Add ncr* configuration.
3964 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3965 picayune ANSI compilers happy.
3967 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3969 * configure.in (i386): Make i386 and i486 synonymous for now.
3970 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3972 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3974 * Makefile.in (install): Fix typo.
3976 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3978 * Makefile.in (make): Remove obsolete crud.
3979 (sparc-opc.o): Avoid Sun Make VPATH bug.
3981 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3983 * Makefile.in: since there are no SUBDIRS, remove rule and
3984 references of subdir_do.
3986 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3988 * Makefile.in (install): Get the library name right here too.
3989 Don't install bfd.h, since it's unrelated to this library. No
3990 subdirs to recurse into, either.
3991 (CFILES): The source file has a .c suffix, not .o.
3993 * sparc-opc.c: New file, moved from BFD.
3994 * Makefile.in (OFILES): Build it.
3996 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3998 * z8k-dis.c: fixed forward refferences of some declarations.
4000 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4002 * Makefile.in: get the name of the library right
4004 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4006 * z8k-dis.c: knows how to disassemble z8k stuff
4007 * z8k-opc.h: new file full of z8000 opcodes
4011 version-control: never