1 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
3 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
5 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
7 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
10 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
11 * aclocal.m4: Rebuild with new libtool.
15 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
17 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
20 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
22 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
24 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
26 * v850-opc.c (v850_opcodes): Further rearrangements.
29 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
31 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
34 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
36 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
39 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
41 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
43 * mips16-opc.c: Added mips16 sdbbp.
46 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
48 * v850-opc.c: Initialise processors field of v850_opcode structure.
51 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
53 Merge changes from Martin Hunt:
55 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
57 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
58 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
59 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
61 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
63 * d30v-dis.c (print_insn): First operand of d*i (delayed
64 branch) instructions is relative.
66 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
67 (d30v_operand_table): Add IMM6S3 type.
68 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
70 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
73 * d30v-opc.c: Correct entries for repeat*, and sat*.
74 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
75 types. Correct several formats.
77 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
79 * d30v-opc.c (pre_defined_registers): Change control registers.
81 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
82 SHORT_C2. Manual was incorrect.
84 * d30v-dis.c (lookup_opcode): Return value now indicates
85 if an opcode has a short and a long form. Used for deciding
86 to append a ".s" or ".l".
87 (print_insn): Append a ".s" to an instruction if it is
88 the short form and ".l" if it is a long form. Do not append
89 anything if the instruction has only one possible size.
91 * d30v-opc.c: Change mulx2h to require an even register.
92 New form: SHORT_A2; a SHORT_A form that needs an even
93 register as the first operand.
95 * d30v-dis.c (print_insn_d30v): Fix problem where the last
96 instruction was not being disassembled if there were an odd
97 number of instructions.
99 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
103 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
105 * v850-dis.c (disassemble): Improved display of register lists.
108 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
110 * sparc-opc.c (sparc_opcodes): Fix assembler args to
111 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
112 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
113 fandnot1s, fandnot2s.
115 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
117 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
119 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
121 * cgen-asm.c (cgen_parse_address): New argument resultp.
123 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
125 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
127 * mn10200-dis.c (disassemble): PC relative instructions are
128 relative to the next instruction, not the current instruction.
130 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
132 * v850-dis.c (disassemble): Only signed extend values that are not
133 returned by extract functions.
134 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
136 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
138 * v850-opc.c: Update comments. Remove use of
139 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
141 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
143 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
145 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
147 * configure: Rebuilt with latest devo autoconf for NT support.
149 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
151 * v850-dis.c (disassemble): Use curly brace syntax for register
154 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
155 where r0 is being used as a destination register.
158 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
160 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
164 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
166 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
167 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
168 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
169 Add insns to access SGR and DBR.
170 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
173 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
175 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
178 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
180 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
181 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
184 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
186 * configure (cgen_files): Add support for v850e target.
187 * configure.in (cgen_files): Add support for v850e target.
189 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
191 * configure (cgen_files): Add support for v850eq target.
192 * configure.in (cgen_files): Add support for v850eq target.
195 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
197 * configure.in (bfd_arc_arch): Add.
198 * configure: Rebuild.
199 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
200 * Makefile.in: Rebuild.
201 * arc-dis.c, arc-opc.c: New files.
202 * disassemble.c (ARCH_all): Define ARCH_arc.
203 (disassembler): Add ARC support.
205 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
208 * v850-dis.c (disassemble): Add support for v850EQ instructions.
210 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
211 (v850_opcodes): Add v850EQ instructions.
213 * v850-dis.c (disassemble): Add support for v850E instructions.
215 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
216 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
217 insert_spe, extract_spe): New Functions.
218 (v850_opcodes): Add v850E instructions.
221 * v850-opc.c: Reorganised and re-layed out to improve readability
224 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
226 * configure: Rebuild with autoconf 2.12.1.
228 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
230 * aclocal.m4, configure: Rebuild with new automake patches.
232 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
234 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
235 * acinclude.m4: Just include acinclude.m4 from BFD.
236 * aclocal.m4, configure: Rebuild.
238 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
240 * Makefile.am: New file, based on old Makefile.in.
241 * acconfig.h: New file.
242 * acinclude.m4: New file.
243 * stamp-h.in: New file.
244 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
245 Removed shared library handling; now handled by libtool. Replace
246 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
247 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
248 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
249 handling in AC_OUTPUT.
250 * dep-in.sed: Change .o to .lo.
251 * Makefile.in: Now built with automake.
252 * aclocal.m4: Now built with aclocal.
253 * config.in, configure: Rebuild.
255 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
257 * mips-opc.c: Fix typo/thinko in "eret" instruction.
260 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
262 * mips-opc.c: Fix coding of mtsa.
265 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
267 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
269 * sparc-dis.c (sorted_opcodes): New static local.
270 (struct opcode_hash): `opcode' is pointer to const element.
271 (build_hash): First arg is now table of sorted pointers.
272 (print_insn_sparc): Sort opcodes by sorting table of pointers.
273 (compare_opcodes): Update.
275 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
277 * cgen-opc.c: #include <ctype.h>.
278 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
279 Handle case insensitive hashing.
280 (hash_keyword_value): Change type of `value' to unsigned int.
282 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
284 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
285 precision FP, mark it as such. Likewise for double precision
286 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
289 (mips_builtin_opcodes): Remove non-existant r5900 instructions
293 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
295 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
296 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
299 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
301 * ppc-opc.c (extract_nsi): make unsigned expression signed before
303 (UNUSED): remove one level of parens, so MSVC doesn't choke on
304 nesting depth when all the macros are expanded.
306 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
308 * sparc-opc.c: The fcmp v9a instructions take an integer register
309 as a destination, not a floating point register. From Christian
310 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
312 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
314 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
315 syntax. From Roman Hodek
316 <rnhodek@faui22c.informatik.uni-erlangen.de>.
318 * i386-dis.c (twobyte_has_modrm): Fix pand.
320 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
322 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
324 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
326 * arm-dis.c: Add prototypes for arm_decode_shift and
329 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
331 * mips-opc.c: Add r3900 insns.
333 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
335 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
336 print delay slot instructions on the same line. When using a PC
337 relative load, add a comment with the value being loaded if it can
340 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
342 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
343 to pushS/popS for segment regs and byte constant so that
344 pushw/popw printed when in 16 bit data mode.
346 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
347 print cbtw, cwtd in 16 bit data mode.
348 * i386-dis.c (putop): extra case W to support above.
350 * i386-dis.c (print_insn_x86): print addr32 prefix when given
351 address size prefix in 16 bit address mode.
353 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
355 * sh-dis.c: Reindent. Rename local variable fprintf to
358 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
360 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
362 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
364 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
366 * mips16-opc.c (mip16_opcodes): same.
368 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
370 * m68k-opc.c (moveb): Change $d to %d.
372 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
374 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
375 (twobyte_has_modrm): Likewise.
377 (OP_MMX, OP_EM, OP_MS): New static functions.
379 * i386-dis.c: Revert patch of April 4. The output now matches
382 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
384 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
387 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
389 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
391 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
393 * Makefile.in (install): Depend upon installdirs.
394 (installdirs): New target.
396 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
398 From Thomas Graichen <graichen@rzpd.de>:
399 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
400 * configure: Rebuild.
402 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
404 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
405 Delete string{,s}.h support.
407 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
409 * cgen-asm.c (cgen_parse_operand_fn): New global.
410 (cgen_parse_{{,un}signed_integer,address}): Update call to
411 cgen_parse_operand_fn.
412 (cgen_init_parse_operand): New function.
413 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
414 from cgen_asm_init_parse.
415 (m32r_cgen_assemble_insn): New operand `errmsg'.
416 Delete call to as_bad, return error message to caller.
417 (m32r_cgen_asm_hash_keywords): #if 0 out.
419 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
421 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
423 [case 'J']: Fix typo in register name.
425 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
427 * configure.in: Substitute SHLIB_LIBS.
428 * configure: Rebuild.
429 * Makefile.in (SHLIB_LIBS): New variable.
430 ($(SHLIB)): Use $(SHLIB_LIBS).
432 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
434 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
436 * cgen-opc.c (hash_keyword_name): Improve algorithm.
438 * disassemble.c (disassembler): Handle m32r.
440 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
442 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
443 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
444 * Makefile.in (CFILES): Add them.
445 (ALL_MACHINES): Add them.
446 (dependencies): Regenerate.
447 * configure.in (cgen_files): New variable.
448 (bfd_m32r_arch): Add entry.
449 * configure: Regenerate.
451 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
453 * configure.in: Correct file names for bfd_mn10[23]00_arch.
454 * configure: Rebuild.
456 * Makefile.in: Rebuild dependencies.
458 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
460 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
463 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
465 * Branched binutils 2.8.
467 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
469 * m10200-dis.c: Rename from mn10200-dis.c.
470 * m10200-opc.c: Rename from mn10200-opc.c.
471 * m10300-dis.c: Rename from mn10300-dis.c
472 * m10300-opc.c: Rename from mn10300-opc.c.
473 * Makefile.in: Update accordingly.
475 * mips16-opc.c: Add mul and dmul macros.
477 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
479 * makefile.vms: Update CFLAGS, add clean target.
481 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
483 * mips-opc.c: Add "wait". From Ralf Baechle
484 <ralf@gnu.ai.mit.edu>.
486 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
487 * configure, config.in: Rebuild.
488 * sysdep.h: Include <stdlib.h> if it exists.
489 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
491 * Makefile.in: Rebuild dependencies.
493 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
495 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
496 Andrew Bray <andy@madhouse.demon.co.uk>.
498 * mips-opc.c: Add cast when setting mips_opcodes.
500 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
502 * v850-dis.c (disassemble): Fix sign extension problem.
503 * v850-opc.c (extract_d*): Fix sign extension problems to make
504 disassembly calculate branch offsets correctly.
506 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
508 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
510 * mips-opc.c: Add dctr and dctw.
513 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
515 * d30v-dis.c (print_insn): Change the way signed constants
518 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
520 * Makefile.in (BFD_H): New variable.
521 (HFILES): New variable.
522 (CFILES): Add all C files.
523 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
524 Delete old dependencies, and build new ones.
525 * dep-in.sed: New file.
527 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
529 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
531 start-sanitize-coldfire
532 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
534 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
537 end-sanitize-coldfire
538 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
540 * mn10200-opc.c: Change "trap" to "syscall".
541 * mn10300-opc.c: Add new "syscall" instruction.
543 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
545 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
546 mulul insns on the coldfire.
548 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
550 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
551 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
552 (print_insn_little_arm): Likewise.
554 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
556 Based on patches from H.J. Lu <hjl@lucon.org>:
557 * i386-dis.c (fetch_data): Add prototype.
558 * m68k-dis.c (fetch_data): Add prototype.
559 (dummy_print_address): Add prototype. Make static.
560 * ppc-opc.c (valid_bo): Add prototype.
561 * sparc-dis.c (build_hash_table): Add prototype.
562 (is_delayed_branch, compute_arch_mask): Add prototypes.
563 (print_insn_sparc): Make several local variables const.
564 (compare_opcodes): Change arguments to const PTR. Add prototype.
565 * sparc-opc.c (arg): Change name field to be const.
566 (lookup_name, lookup_value): Add prototypes. Change table and
567 name parameters to be const.
568 (sparc_encode_asi): Change name parameter to be const.
569 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
570 (sparc_encode_sparclet_cpreg): Likewise.
571 (sparc_decode_asi): Change return type to be const.
572 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
573 (sparc_decode_sparclet_cpreg): Likewise.
575 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
577 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
578 Solaris doesn't like the combined options, and the -f is
580 (stamp-tshlink, install): Likewise.
582 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
584 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
587 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
589 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
591 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
593 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
596 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
598 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
601 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
603 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
605 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
607 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
610 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
612 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
613 floatformat_to_double to make portable.
614 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
617 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
619 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
620 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
622 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
624 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
625 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
628 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
630 * tic80-opc.c (LSI_SCALED): Renamed from this ...
631 (OFF_SL_BR_SCALED): ... to this, and added the flag
632 TIC80_OPERAND_BASEREL to the flags word.
633 (tic80_opcodes): Replace all occurances of LSI_SCALED with
637 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
639 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
640 Change mips_opcodes from const array to a pointer,
641 and change bfd_mips_num_opcodes from const int to int,
642 so that we can increase the size of the mips opcodes table
646 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
648 * tic80-opc.c (tic80_predefined_symbols): Revert change to
649 store BITNUM values in the table in one's complement form
650 to match behavior when assembler is given a raw numeric
651 value for a BITNUM operand.
652 * tic80-dis.c (print_operand_bitnum): Ditto.
656 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
658 * d30v-opc.c: Removed references to FLAG_X.
661 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
663 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
666 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
668 * Makefile.in: Added d30v object files.
669 * configure: (bfd_d30v_arch) Rebuilt.
670 * configure.in: (bfd_d30v_arch) Added new case.
671 * d30v-dis.c: New file.
672 * d30v-opc.c: New file.
673 * disassemble.c (disassembler) Add entry for d30v.
677 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
679 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
680 representations for the floating point BITNUM values.
682 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
684 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
685 in the table in one's complement form, as they appear in the
687 (tic80_symbol_to_value): Use macros to access predefined
689 (tic80_value_to_symbol): Ditto.
690 (tic80_next_predefined_symbol): New function.
691 * tic80-dis.c (print_operand_bitnum): Remove code that did
692 one's complement for BITNUM values.
696 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
698 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
701 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
703 * makefile.vms: Remove 8 bit characters. Update to latest
706 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
708 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
710 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
712 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
713 (IMM24_PCREL): Likewise.
715 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
717 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
718 address for an extended PC relative instruction that is not a
721 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
723 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
727 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
729 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
730 (tic80_opcodes): Sort entries so that long immediate forms
731 come after short immediate forms, making it easier for
732 assembler to select the right one for a given operand.
735 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
737 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
739 (print_insn_mips16): Likewise.
742 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
744 * mips-opc.c: add r5900.
748 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
750 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
751 a symbol class that restricts translation to just that
752 class (general register, condition code, etc).
754 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
756 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
757 and REG_DEST_E for register operands that have to be
758 an even numbered register. Add REG_FPA for operands that
759 are one of the floating point accumulator registers.
760 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
761 (tic80_opcodes): Change entries that need even numbered
762 register operands to use the new operand table entries.
763 Add "or" entries that are identical to "or.tt" entries.
766 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
768 * mips16-opc.c: Add new cases of exit instruction for
770 * mips-dis.c (print_mips16_insn_arg): Display floating point
771 registers in operands of exit instruction. Print `$' before
772 register names in operands of entry and exit instructions.
775 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
777 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
778 pairs for all predefined symbols recognized by the assembler.
779 Also used by the disassembling routines.
780 (tic80_symbol_to_value): New function.
781 (tic80_value_to_symbol): New function.
782 * tic80-dis.c (print_operand_control_register,
783 print_operand_condition_code, print_operand_bitnum):
784 Remove private tables and use tic80_value_to_symbol function.
787 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
789 * d10v-dis.c (print_operand): Change address printing
790 to correctly handle PC wrapping. Fixes PR11490.
792 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
794 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
797 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
799 * mips-dis.c (print_insn_mips16): Set insn_info information.
800 (print_mips16_insn_arg): Likewise.
802 * mips-dis.c (print_insn_mips16): Better handling of an extend
803 opcode followed by an instruction which can not be extended.
805 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
807 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
808 coldfire moveb instruction to not allow an address register as
809 destination. Although the documentation does not indicate that
810 this is invalid, experiments uncovered unexpected behavior.
811 Added a comment explaining the situation. Thanks to Andreas
812 Schwab for pointing this out to me.
815 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
817 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
818 entries are presorted so that entries with the same mnemonic are
819 adjacent to each other in the table. Sort the entries for each
820 instruction so that this is true.
823 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
825 * m68k-dis.c: Include <libiberty.h>.
826 (print_insn_m68k): Sort the opcode table on the most significant
827 nibble of the opcode.
830 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
832 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
833 "vsub", "vst", "xnor", and "xor" instructions.
834 (V_a1): Renamed from V_a, msb of accumulator reg number.
835 (V_a0): Add macro, lsb of accumulator reg number.
837 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
839 * tic80-dis.c (print_insn_tic80): Broke excessively long
840 function up into several smaller ones and arranged for
841 the instruction printing function to be callable recursively
842 to print vector instructions that have both a load and a
843 math instruction packed into a single opcode.
844 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
845 to explain why it comes after the other vector opcodes.
848 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
850 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
851 move insns to handle immediate operands.
853 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
855 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
856 fix operand mask in the "moveml" entries for the coldfire.
859 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
861 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
862 New macros for building vector instruction opcodes.
863 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
864 FMT_LI, which were unused. The field is now a flags field.
865 Remove some opcodes that are possible, but illegal, such
866 as long immediate instructions with doubles for immediate
867 values. Add "vadd" and "vld" instructions.
869 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
871 * tic80-opc.c (tic80_operands): Reorder some table entries to make
872 the order more logical. Move the shift alias instructions ("rotl",
873 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
874 interspersed with the regular sr.x and sl.x instructions. Add
875 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
876 "sub", "subu", "swcr", and "trap".
878 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
880 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
881 (OFF_SL_PC): Renamed from OFF_SL.
882 (OFF_SS_BR): New operand type for base relative operand.
883 (OFF_SL_BR): New operand type for base relative operand.
884 (REG_BASE): New operand type for base register operand.
885 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
886 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
887 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
889 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
890 10 char field, padded with spaces on rhs, rather than a string
891 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
892 than old TIC80_OPERAND_RELATIVE. Add support for new
893 TIC80_OPERAND_BASEREL flag bit.
895 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
897 * tic80-dis.c (print_insn_tic80): Print floating point operands
899 * tic80-opc.c (SPFI): Add single precision floating point
900 immediate operand type.
901 (ROTATE): Add rotate operand type for shifts.
902 (ENDMASK): Add for shifts.
903 (n): Macro for the 'n' bit.
904 (i): Macro for the 'i' bit.
905 (PD): Macro for the 'PD' field.
906 (P2): Macro for the 'P2' field.
907 (P1): Macro for the 'P1' field.
908 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
912 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
914 * mn10200-dis.c (disassemble): Mask off unwanted bits after
915 adding in current address for pc-relative operands.
918 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
920 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
921 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
922 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
923 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
924 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
925 REG_BASE_M_SI, REG_BASE_M_LI respectively.
926 (REG_SCALED, LSI_SCALED): New operand types.
927 (E): New macro for 'E' bit at bit 27.
928 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
929 opcodes, including the various size flavors (b,h,w,d) for
930 the direct load and store instructions.
932 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
934 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
936 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
937 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
938 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
939 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
940 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
941 masks with "MASK_* & ~M_*" to get the M bit reset.
942 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
944 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
946 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
947 correctly. Add support for printing TIC80_OPERAND_BITNUM and
948 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
950 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
951 CC, SICR, and LICR table entries.
952 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
953 "bcnd", and "brcr" opcodes.
956 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
958 * ppc-opc.c (powerpc_operands): Make comment match the
959 actual fields (no shift field).
960 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
962 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
963 partial implementation, work in progress.
964 * tic80-opc.c (tic80_operands): Begin construction operands table.
965 (tic80_opcodes): Continue populating opcodes table and start
966 filling in the operand indices.
967 (tic80_num_opcodes): Add this.
970 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
972 * m68k-opc.c: Add #B case for moveq.
974 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
976 * mn10300-dis.c (disassemble): Make sure all variables are initialized
977 before they are used.
979 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
981 * v850-opc.c (v850_opcodes): Put curly-braces around operands
982 for "breakpoint" instruction.
984 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
986 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
987 (dep): Use ALL_CFLAGS rather than CFLAGS.
989 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
991 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
994 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
996 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
998 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1001 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1003 * mips16-opc.c: Add "abs".
1005 start-sanitize-tic80
1006 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1008 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1009 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1010 (disassembler): Add bfd_arch_tic80 support to set disassemble
1011 to print_insn_tic80.
1012 * tic80-dis.c (print_insn_tic80): Add stub.
1014 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1016 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1017 * configure: Regenerate with autoconf.
1018 * tic80-dis.c: Add file.
1019 * tic80-opc.c: Add file.
1022 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1024 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1026 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1028 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1029 (mn10200_opcodes): Use it for some logicals and btst insns.
1030 Add "break" and "trap" instructions.
1032 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1034 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1036 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1038 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1039 relative load or add now depends upon whether the instruction is
1042 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1044 * mn10200-dis.c: Finish writing disassembler.
1045 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1046 Fix mask for "jmp (an)".
1048 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1049 handle endianness issues for mn10300.
1051 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1053 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1055 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1056 instruction. Fix opcode field for "movb (imm24),dn".
1058 * mn10200-opc.c (mn10200_operands): Fix insertion position
1061 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1063 * mn10200-opc.c: Create mn10200 opcode table.
1064 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1065 but moving along nicely.
1067 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1069 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1071 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1073 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1074 specifiers for fmovem* instructions.
1076 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1078 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1080 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1082 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1085 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1087 * mn10300-opc.c: Add some comments explaining the various
1090 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1092 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1094 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1097 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1098 operand specifiers in fmovm* instructions.
1100 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1102 * ppc-opc.c (insert_li): Give an error if the offset has the two
1103 least significant bits set.
1105 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1107 * mips-dis.c (print_insn_mips16): Separate the instruction from
1108 the arguments with a tab, not a space.
1110 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1112 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1115 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1118 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1120 * configure: Rebuild with autoconf 2.12.
1122 Add support for mips16 (16 bit MIPS implementation):
1123 * mips16-opc.c: New file.
1124 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1125 (mips16_reg_names): New static array.
1126 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1127 after seeing a 16 bit symbol.
1128 (print_insn_little_mips): Likewise.
1129 (print_insn_mips16): New static function.
1130 (print_mips16_insn_arg): New static function.
1131 * mips-opc.c: Add jalx instruction.
1132 * Makefile.in (mips16-opc.o): New target.
1133 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1134 * configure: Rebuild.
1136 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1138 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1139 operand specifiers in *save, *restore and movem* instructions.
1141 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1144 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1145 register operands for immediate arithmetic, not, neg, negx, and
1146 set according to condition instructions.
1148 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1149 specifier of the effective-address operand in immediate forms of
1150 arithmetic instructions. The specifier for the immediate operand
1151 notes how and where the constant will be stored.
1153 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1155 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1158 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1161 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1163 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1165 * mn10300-dis.c (disassemble): Handle register lists.
1167 * mn10300-opc.c: Fix handling of register list operand for
1168 "call", "ret", and "rets" instructions.
1170 * mn10300-dis.c (disassemble): Print PC-relative and memory
1171 addresses symbolically if possible.
1172 * mn10300-opc.c: Distinguish between absolute memory addresses,
1173 pc-relative offsets & random immediates.
1175 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1177 (disassemble): Handle SPLIT and EXTENDED operands.
1179 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1181 * mn10300-dis.c: Rough cut at printing some operands.
1183 * mn10300-dis.c: Start working on disassembler support.
1184 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1186 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1188 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1190 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1192 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1194 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1196 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1197 register argument is calls and jmp instructions.
1199 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1201 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1202 getx operand. Fix opcode for mulqu imm,dn.
1204 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1206 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1207 in MN10300_OPERAND_SPLIT operands for how many bits
1208 appear in the basic insn word. Add IMM32_HIGH24,
1209 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1210 (mn10300_opcodes): Use new operands as needed.
1212 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1213 for bset, bclr, btst instructions.
1214 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1216 * mn10300-opc.c (mn10300_operands): Remove many redundant
1217 operands. Update opcode table as appropriate.
1218 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1219 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1221 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1223 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1224 operands (for indexed load/stores). Fix bitpos for DI
1225 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1226 few instructions that insert immediates/displacements in the
1227 middle of the instruction. Add IMM8E for 8 bit immediate in
1228 the extended part of an instruction.
1229 (mn10300_operands): Use new opcodes as appropriate.
1231 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1233 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1234 sequential so the assembler never parallelizes it with
1237 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1239 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1240 a data/address register that appears in register field 0
1241 and register field 1.
1242 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1244 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1246 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1247 standard disassembly.
1249 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1250 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1251 Recategorize PALcode instructions.
1253 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1255 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1257 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1259 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1260 there are no operand types.
1262 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1264 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1266 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1268 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1270 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1272 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1274 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1275 and sst.w instructions.
1277 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1280 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1282 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1285 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1287 * ppc-opc.c (PPCPWR2): Define.
1288 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1291 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1293 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1294 field for movhu instruction.
1296 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1297 cast value to "long" not "signed long" to keep hpux10
1300 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1302 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1305 * mn10300-opc.c (FMT*): Remove definitions.
1307 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1308 for shift-by-register opcodes.
1310 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1311 into [AD][MN][01] for encoding the position of the register
1314 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1316 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1317 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1319 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1321 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1322 Fix various typos. Add "PAREN" operand.
1323 (MEM, MEM2): Define.
1324 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1325 operands. Fix several typos.
1327 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1330 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1332 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1333 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1335 (mn10300_opcodes): Break opcode format out into its own field.
1336 Update many operand fields to deal with signed vs unsigned
1337 issues. Fix one or two typos in the "mov" instruction
1338 opcode, mask and/or operand fields.
1340 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1342 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1343 m68851 wasn't reset.
1345 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1347 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1348 all opcodes. Very rough cut at operands for all opcodes.
1350 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1353 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1355 * mn10200-opc.c, mn10300-opc.c: New files.
1356 * mn10200-dis.c, mn10300-dis.c: New files.
1357 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1358 * disassemble.c: Break mn10x00 support into 10200 and 10300
1360 * configure.in: Likewise.
1361 * configure: Rebuilt.
1363 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1365 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1367 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1369 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1371 * disassemble (ARCH_mn10x00): Define.
1372 (disassembler): Handle bfd_arch_mn10x00.
1373 * configure.in: Recognize bfd_mn10x00_arch.
1374 * configure: Rebuilt.
1376 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1378 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1379 accordingly. Don't declare functions using op_rtn.
1381 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1383 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1384 params to be more standard.
1385 * (disassemble): Print absolute addresses and symbolic names for
1386 branch and jump targets.
1387 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1389 * (v850_opcodes): Add breakpoint insn.
1391 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1393 * m68k-opc.c: Move the fmovemx data register cases before the
1394 other cases, so that they get recognized before the data register
1395 does gets treated as a degenerate register list.
1397 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1399 * mips-opc.c: Add a case for "div" and "divu" with two registers
1400 and a destination of $0.
1402 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1404 * mips-dis.c (print_insn_arg): Add prototype.
1405 (_print_insn_mips): Ditto.
1407 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1409 * mips-dis.c (print_insn_arg): Print condition code registers as
1412 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1414 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1416 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1418 * v850-dis.c (disassemble): Make static. Provide prototype.
1420 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1422 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1425 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1427 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1428 ']' characters into the output stream.
1429 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1430 Add "memop" field to all opcodes (for the disassembler).
1431 Reorder opcodes so that "nop" comes before "mov" and "jr"
1432 comes before "jarl".
1434 * v850-dis.c (print_insn_v850): Fix typo in last change.
1436 * v850-dis.c (print_insn_v850): Properly handle disassembling
1437 a two byte insn at the end of a memory region when the memory
1438 region's size is only two byte aligned.
1440 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1442 * v850-dis.c (v850_reg_names): Define.
1443 (v850_sreg_names, v850_cc_names): Likewise.
1444 (disassemble): Very rough cut at printing operands (unformatted).
1446 * v850-opc.c (BOP_MASK): Fix.
1447 (v850_opcodes): Fix mask for jarl and jr.
1449 * v850-dis.c: New file. Skeleton for disassembler support.
1450 * Makefile.in Remove v850 references, they're not needed here.
1451 * configure.in: Add v850-dis.o when building v850 toolchains.
1452 * configure: Rebuilt.
1453 * disassemble.c (disassembler): Call v850 disassembler.
1455 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1456 (insert_d8_6, extract_d8_6): New functions.
1457 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1458 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1460 (IF4A, IF4B): Use "D7" instead of "D7S".
1461 (IF4C, IF4D): Use "D8_7" instead of "D8".
1462 (IF4E, IF4F): New. Use "D8_6".
1463 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1464 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1466 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1467 (v850_operands): Change D16 to D16_15, use special insert/extract
1468 routines. New new D16 that uses the generic insert/extract code.
1469 (IF7A, IF7B): Use D16_15.
1470 (IF7C, IF7D): New. Use D16.
1471 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1473 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1474 message. Issue an error if the branch offset is odd.
1476 * v850-opc.c: Add notes about needing special insert/extract
1477 for all the load/store insns, except "ld.b" and "st.b".
1479 * v850-opc.c (insert_d22, extract_d22): New functions.
1480 (v850_operands): Use insert_d22 and extract_d22 for
1482 (insert_d9): Fix range check.
1484 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1486 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1487 and set bits field to D9 and D22 operands.
1489 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1491 * v850-opc.c (v850_operands): Define SR2 operand.
1492 (v850_opcodes): "ldsr" uses R1,SR2.
1494 * v850-opc.c (v850_opcodes): Fix opcode specs for
1495 sld.w, sst.b, sst.h, sst.w, and nop.
1497 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1499 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1500 end of the opcode table.
1502 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1504 * d10v-opc.c (pre_defined_registers): Added register pairs,
1505 "r0-r1", "r2-r3", etc.
1507 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1509 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1510 Create I16U for an unsigned 16bit mmediate operand.
1511 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1513 * v850-opc.c (v850_operands): Define EP operand.
1514 (IF4A, IF4B, IF4C, IF4D): Use EP.
1516 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1517 with immediate operand, "movhi". Tweak "ldsr".
1519 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1520 correct. Get sld.[bhw] and sst.[bhw] closer.
1522 * v850-opc.c (v850_operands): "not" is a two byte insn
1524 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1526 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1528 * v850-opc.c (two): Get order of words correct.
1530 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1532 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1533 register source and destination operands.
1534 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1536 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1537 same thinko in "trap" opcode.
1539 * v850-opc.c (v850_opcodes): Add initializer for size field
1542 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1543 Add D8 for 8-bit unsigned field in short load/store insns.
1544 (IF4A, IF4D): These both need two registers.
1545 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1546 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1547 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1548 for "ldsr" and "stsr".
1549 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1552 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1553 short store word (sst.w).
1555 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1557 * v850-opc.c (v850_operands): Added insert and extract fields,
1558 pointers to functions that handle unusual operand encodings.
1560 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1562 * v850-opc.c (v850_opcodes): Enable "trap".
1564 * v850-opc.c (v850_opcodes): Fix order of displacement
1565 and register for "set1", "clr1", "not1", and "tst1".
1567 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1569 * v850-opc.c (v850_operands): Add "B3" support.
1570 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1573 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1575 * v850-opc.c: Close unterminated comment.
1577 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1579 * v850-opc.c (v850_operands): Add flags field.
1580 (v850_opcodes): add move opcodes.
1582 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1584 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1585 * configure: (bfd_v850v_arch) Add new case.
1586 * configure.in: (bfd_v850_arch) Add new case.
1587 * v850-opc.c: New file.
1589 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1591 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1593 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1595 * d10v-opc.c: Add additional information to the opcode
1596 table to help determinine which instructions can be done
1599 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1601 * mpw-make.sed: Update editing of include pathnames to be
1604 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1606 * arm-opc.h: Added "bx" instruction definition.
1608 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1610 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1612 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1614 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1616 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1618 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1620 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1622 * makefile.vms: Update for alpha-opc changes.
1624 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1626 * i386-dis.c (print_insn_i386): Actually return the correct value.
1627 (ONE, OP_ONE): #ifdef out; not used.
1629 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1631 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1632 Changed subi operand type to treat 0 as 16.
1634 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1636 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1639 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1641 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1642 memory transfer instructions. Add new format string entries %h and %s.
1643 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1646 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1648 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1649 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1651 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1653 * alpha-dis.c (print_insn_alpha_osf): Remove.
1654 (print_insn_alpha_vms): Remove.
1655 (print_insn_alpha): Make globally visible. Chose the register
1656 names based on info->flavour.
1657 * disassemble.c: Always return print_insn_alpha for the alpha.
1659 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1661 * d10v-dis.c (dis_long): Handle unknown opcodes.
1663 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1665 * d10v-opc.c: Changes to support signed and unsigned numbers.
1666 All instructions with the same name that have long and short forms
1667 now end in ".l" or ".s". Divs added.
1668 * d10v-dis.c: Changes to support signed and unsigned numbers.
1670 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1672 * d10v-dis.c: Change all functions to use info->print_address_func.
1674 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1676 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1677 move ccr/sr insns more strict so that the disassembler only
1678 selects them when the addressing mode is data register.
1680 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1681 * d10v-opc.c (pre_defined_registers): Declare.
1682 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1683 to pick a better name for the registers.
1685 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1687 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1688 operands for fexpand and fpmerge. From Christian Kuehnke
1689 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1691 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1693 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1694 print routine. Take new regnames and cpumask arguments.
1695 Kill the environment variable nonsense.
1696 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1697 (print_insn_alpha_vms): New function. Do VMS style regnames.
1698 * disassemble.c (disassembler): Test bfd flavour to pick
1699 between OSF and VMS routines. Default to OSF.
1701 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1703 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1704 * configure: Rebuild.
1705 * Makefile.in (install): Use @INSTALL_SHLIB@.
1707 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1709 * configure: (bfd_d10v_arch) Add new case.
1710 * configure.in: (bfd_d10v_arch) Add new case.
1711 * d10v-dis.c: New file.
1712 * d10v-opc.c: New file.
1713 * disassemble.c (disassembler) Add entry for d10v.
1715 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1717 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1718 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1720 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1722 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1723 distinguish between variants of the instruction set.
1724 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1725 distinguish between variants of the instruction set.
1727 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1729 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1730 the 8086 instruction set.
1731 * i386-dis.c: General cleanups. Make most things static. Add
1732 prototypes. Get rid of static variables aflags and dflags. Pass
1733 them as args (to almost everything).
1735 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1737 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1739 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1741 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1742 if the next arg is marked with SRC_IN_DST. Gross.
1744 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1745 we're looking for and find EXR.
1747 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1748 if we're looking for KBIT and we don't find it.
1750 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1753 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1754 3bit immediate operands.
1756 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1758 * Released binutils 2.7.
1760 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1761 <kkaempf@progis.ac-net.de>.
1763 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1765 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1767 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1769 * sparc-dis.c (print_insn_sparclite): New routine to print
1770 sparclite instructions.
1772 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1774 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1776 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1778 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1779 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1780 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1782 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1784 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1785 Use autoconf-set values.
1786 (docdir, oldincludedir): Removed.
1787 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1789 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1791 * alpha-opc.c: New file.
1792 * alpha-opc.h: Remove.
1793 * alpha-dis.c: Complete rewrite to use new opcode table.
1794 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1795 * configure: Rebuild with autoconf 2.10.
1796 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1797 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1799 (alpha-opc.o): New target.
1801 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1803 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1804 Set imm_added_to_rs1 even if the source and destination register
1807 * sparc-opc.c: Add some two operand forms of the wr instruction.
1809 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1811 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1814 * disassemble.c (disassembler): Handle H8/S.
1815 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1817 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1819 * sparc-opc.c: Add beq/teq as aliases for be/te.
1821 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1822 <sergei@msil.sps.mot.com>.
1824 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1826 * makefile.vms: New file.
1828 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1830 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1832 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1835 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1837 * i386-dis.c (OP_OFF): Call append_prefix.
1839 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1841 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1842 unsigned long to silence a warning from the Solaris PowerPC
1845 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1847 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1849 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1851 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1853 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1854 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1855 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1856 cpush, cpusha, cpull sparclet insns.
1858 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1860 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1862 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1864 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1865 Set F_FLOAT on other floating point instructions.
1867 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1869 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1871 (powerpc_opcodes): Add 860/821 specific SPRs.
1873 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1875 * configure.in: Permit --enable-shared to specify a list of
1876 directories. Set and substitute BFD_PICLIST.
1877 * configure: Rebuild.
1878 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1879 uses. Set to @BFD_PICLIST@.
1881 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1883 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1884 not "abs", which may be needed for the absolute in something
1885 like btst #0,@10:8. Print L_3 immediates separately from other
1886 immediates. Change ABSMOV reference to ABS8MEM.
1888 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1890 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1891 (current_arch_mask): New static global.
1892 (compute_arch_mask): New static function.
1893 (print_insn_sparc): Delete sparc_v9_p. New static local
1894 current_mach. Resort opcode table if current_mach changes.
1895 Generalize "insn not supported" test.
1896 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1897 Delete test for v9/!v9.
1898 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1900 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1901 (brfcx): Renamed to FBRX.
1902 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1903 coprocessor mnemonics are not supported on the sparclet).
1904 (condf): Renamed to CONDF.
1905 (SLCBCC2): Delete F_ALIAS flag.
1907 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1909 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1910 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1912 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1914 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1915 that the shared library version number is set correctly.
1917 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1919 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1920 Miles Bader <miles@gnu.ai.mit.edu>.
1921 * configure: Rebuild.
1923 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1925 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1928 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1930 * configure: Rebuild with autoconf 2.8.
1932 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1934 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1935 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1937 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1939 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1940 since they appear as targets in Makefile.in.
1941 * configure: Rebuild.
1943 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1945 * mpw-make.sed: Edit out shared library support bits.
1947 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1949 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1950 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1951 (sparc_opcodes): Add sparclet insns.
1952 (sparclet_cpreg_table): New static local.
1953 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1954 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1956 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1958 * i386-dis.c (index16): New static variable.
1959 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1961 (OP_indirE): Return result of OP_E.
1962 (OP_E): Check for 16 bit addressing mode, and disassemble
1963 correctly. Optimised 32 bit case a little. Don't print
1964 "(base,index,scale)" when sib specifies only an offset.
1966 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1968 * configure.in: Set and substitute SHLIB_DEP.
1969 * configure: Rebuild.
1970 * Makefile.in (SHLIB_DEP): New variable.
1971 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1972 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1973 COMMON_SHLIB, add them to piclist with appropriate modifications.
1974 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1975 here: just use piclist.
1977 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1979 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1980 (print_insn_sparc): Rewrite v9/not-v9 tests.
1981 (compare_opcodes): Likewise.
1982 * sparc-opc.c (MASK_<ARCH>): Define.
1983 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1984 (sparclet,v6notv9): Define.
1985 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1986 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1988 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1990 * configure.in: Call AC_PROG_CC before configure.host.
1991 * configure: Rebuild.
1993 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1995 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1997 * i386-dis.c (onebyte_has_modrm): New static array.
1998 (twobyte_has_modrm): New static array.
1999 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2001 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2003 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2006 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2008 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2011 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2013 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2014 m68010up, not just m68020up | cpu32.
2016 * Makefile.in (SONAME): New variable.
2017 ($(SHLINK)): Make a link to the transformed name, as well.
2018 (stamp-tshlink): New target.
2019 (install): Skip stamp-tshlink during install.
2021 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2023 * configure.in: Call AC_ARG_PROGRAM.
2024 * configure: Rebuild.
2025 * Makefile.in (program_transform_name): New variable.
2026 (install): Transform library name before installing it.
2028 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2030 * i960-dis.c (mem): Add HX dcinva instruction.
2032 Support for building as a shared library, based on patches from
2033 Alan Modra <alan@spri.levels.unisa.edu.au>:
2034 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2035 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2036 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2037 * configure: Rebuild.
2038 * Makefile.in (ALLLIBS): New variable.
2039 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2040 (COMMON_SHLIB, SHLINK): New variables.
2041 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2042 (STAGESTUFF): Remove variable.
2043 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2044 (stamp-piclist, piclist): New targets.
2045 ($(SHLIB), $(SHLINK)): New targets.
2046 ($(OFILES)): Depend upon stamp-picdir.
2047 (disassemble.o): Build twice if PICFLAG is set.
2048 (MOSTLYCLEAN): Add pic/*.o.
2049 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2050 (distclean): Remove pic and stamp-picdir.
2051 (install): Install shared libraries.
2052 (stamp-picdir): New target.
2054 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2056 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2057 Print unknown instruction as "unknown", rather than in hex.
2059 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2061 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2063 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2065 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2067 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2069 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2070 when necessary. From Ulrich Drepper
2071 <drepper@myware.rz.uni-karlsruhe.de>.
2073 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2075 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2076 sparc_num_opcodes. Update architecture enum values.
2077 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2078 (sparc_opcode_lookup_arch): New function.
2079 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2080 (sparc_opcodes): Add v9a shutdown insn.
2082 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2084 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2085 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2087 (print_insn_sparc64): Deleted.
2088 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2091 * sparc-opc.c (architecture_pname): Add v9a.
2093 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2095 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2096 incorrectly defined as 0x16 when it should be 0x15.
2097 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2098 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2099 excb (exception barrier) which is defined in the Alpha
2100 Architecture Handbook version 2.
2101 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2102 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2103 disassembled as or, for example.
2105 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2107 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2108 (_print_insn_mips): Change i from int to unsigned int.
2110 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2112 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2113 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2115 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2117 * i386-dis.c: Added Pentium Pro instructions.
2119 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2121 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2124 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2126 * sh-opc.h (sh_nibble_type): Added REG_B.
2127 (sh_arg_type): Added A_REG_B.
2128 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2130 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2132 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2134 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2136 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2138 * Makefile.in (distclean): Remove stamp-h. From Ronald
2139 F. Guilmette <rfg@monkeys.com>.
2141 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2143 From David Mosberger-Tang <davidm@azstarnet.com>:
2144 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2147 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2149 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2150 (sh_table): Added many SH3 opcodes.
2151 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2153 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2155 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2156 (subco,subco.): Mark this PPC, not PPCCOM.
2158 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2160 * configure: Rebuild with autoconf 2.7.
2162 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2164 * configure: Rebuild with autoconf 2.6.
2166 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2168 * configure.in: Sort list of architectures. Accept but do nothing
2169 for alliant, convex, pyramid, romp, and tahoe.
2171 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2173 * a29k-dis.c (print_special): Change num to unsigned int.
2175 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2177 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2180 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2182 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2183 * configure: Rebuilt.
2185 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2187 * configure.in: Add case for bfd_i860_arch.
2188 * configure: Rebuild.
2190 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2192 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2193 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2194 (NEXTDOUBLE): Likewise.
2195 (print_insn_m68k): Don't match fmoveml if there is more than one
2196 register in the list.
2197 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2199 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2201 * m68k-opc.c: Use #W rather than #w.
2202 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2204 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2206 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2207 and likewise for all the dbxx opcodes.
2209 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2211 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2213 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2215 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2216 the VR4100 specific instructions to the mips_opcodes structure.
2218 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2220 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2221 ugly Metrowerks bug in CW6, is fixed in CW7.
2223 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2225 * ppc-opc.c (whole file): Add flags for common/any support.
2227 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2229 * Makefile.in (BISON): Remove macro.
2230 (FLAGS_TO_PASS): Remove BISON.
2232 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2234 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2236 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2237 instructions that take no args by looking at the match mask.
2238 (print_insn_arg): Always print "%" before register names.
2239 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2240 [case '_']: Don't print "@#" before address.
2241 [case 'J']: Use "%s" as format string, not register name.
2242 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2244 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2246 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2249 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2251 From David Mosberger-Tang <davidm@azstarnet.com>
2253 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2254 (alpha_insn_set): added definitions for VAX floating point
2255 instructions (Unix compilers don't generate these, but handcoded
2256 assembly might still use them).
2258 * alpha-dis.c (print_insn_alpha): added support for disassembling
2259 the miscellaneous instructions in the Alpha instruction set.
2261 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2263 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2264 no longer create sysdep.h, sed ppc-opc.c to work around a
2265 serious Metrowerks C bug.
2266 * mpw-make.in: Remove.
2267 * mpw-make.sed: New file, used by mpw-configure to edit
2268 Makefile.in into an MPW makefile.
2270 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2272 * Makefile.in (maintainer-clean): New synonym for realclean.
2274 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2276 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2277 which use '0', '1', and '2' instead. Specify the proper size for
2278 a pmove immediate operand. Correct the pmovefd patterns to be
2279 moves to a register, not from a register.
2280 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2282 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2284 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2285 %psr, %wim, %tbr as F_NOTV9.
2287 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2289 * Makefile.in (Makefile): Just rebuild Makefile when running
2291 (config.h, stamp-h): New targets.
2292 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2293 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2294 rebuilding config.h.
2295 * configure: Rebuild.
2297 * mips-opc.c: Change unaligned loads and stores with "t,A"
2298 operands to use "t,A(b)".
2300 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2302 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2304 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2306 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2307 until 3 instead of until 2.
2309 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2311 * Makefile.in (ALL_CFLAGS): Define.
2312 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2313 (MOSTLYCLEAN): Add config.log.
2314 (distclean): Don't remove config.log.
2315 * configure.in: Substitute HDEFINES.
2316 * configure: Rebuild.
2318 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2320 * sh-opc.h (sh_arg_type): Add F_FR0.
2321 (sh_table, case fmac): Add F_FR0 as first argument.
2323 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2325 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2327 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2329 * sparc-dis.c: Remove all references to NO_V9.
2331 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2333 * aclocal.m4: Just include ../bfd/aclocal.m4.
2334 * configure: Rebuild.
2336 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2338 * sparc-dis.c (X_DISP19): Define.
2339 (print_insn, case 'G'): Use it.
2340 (print_insn, case 'L'): Sign extend displacement.
2342 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2344 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2345 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2346 host_makefile_frag or frags.
2347 * aclocal.m4: New file.
2348 * configure: Rebuild.
2349 * Makefile.in (INSTALL): Set to @INSTALL@.
2350 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2351 (INSTALL_DATA): Set to @INSTALL_DATA@.
2353 (AR_FLAGS): Set to rc rather than qc.
2354 (CC): Define as @CC@.
2355 (CFLAGS): Set to @CFLAGS@.
2356 (@host_makefile_frag@): Remove.
2357 (config.status): Remove dependency upon @frags@.
2359 * configure.in: ../bfd/config.bfd now just sets shell variables.
2360 Use them rather than looking through target Makefile fragments.
2361 * configure: Rebuild.
2363 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2365 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2367 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2369 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2370 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2373 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2374 (lookup_{name,value}): New functions.
2375 (prefetch_table): New static local.
2376 (sparc_{encode,decode}_prefetch): New functions.
2377 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2379 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2381 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2384 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2386 * sh-dis.c: Correct comment on first line of file.
2388 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2390 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2392 * sparc-opc.c (asi, membar): New static locals.
2393 (sparc_{encode,decode}_{asi,membar}): New functions.
2394 (sparc_opcodes, membar insn): Fix.
2395 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2396 Support decoding of membar masks.
2399 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2401 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2403 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2405 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2406 and likewise for the other branches. Add bhs as an alias for bcc,
2407 and likewise for the size variants. Add dbhs as an alias for
2410 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2412 * sh-opc.h (FP sts instructions): Update to match reality.
2414 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2416 * m68k-dis.c: (fpcr_names): Add % before all register names.
2417 (reg_names): Likewise.
2418 (print_insn_arg): Don't explicitly print % before register names.
2419 Add % before register names in static array names. In case 'r',
2420 print data registers as `@(Dn)', not `Dn@'. When printing a
2421 memory address, don't print @# before it.
2422 (print_indexed): Change base_disp and outer_disp from int to
2423 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2424 syntax. Sign extend 8 byte displacement correctly.
2425 (print_base): Print using MIT syntax. Print zpc when appropriate.
2426 Change parameter disp from int to bfd_vma.
2428 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2431 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2433 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2434 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2435 * sh-opc.h (sh_arg_type): Add new operand types.
2436 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2438 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2440 * Makefile.in (distclean): Remove generated file config.h.
2442 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2444 * Makefile.in (distclean): Remove generated file config.h.
2446 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2448 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2450 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2452 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2453 rather than numopcodes. Use m68k_opcodes rather than removed
2454 opcode function. Don't check F_ALIAS.
2455 (print_insn_arg): Change first parameter to be const char *.
2456 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2457 (m68k-opc.o): New target.
2458 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2459 * configure: Rebuild.
2461 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2463 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2464 (opcode_bits, opcode_hash_table): New variables.
2465 (opcodes_initialized): Renamed from opcodes_sorted.
2466 (build_hash_table): New function.
2467 (is_delayed_branch): Use hash table.
2468 (print_insn): Renamed from print_insn_sparc, made static.
2469 Build and use hash table. If !sparc64, ignore sparc64 insns,
2470 and vice-versa if sparc64.
2471 (print_insn_sparc, print_insn_sparc64): New functions.
2472 (compare_opcodes): Move sparc64 opcodes to end.
2473 Print commutative insns with constant second.
2474 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2476 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2478 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2479 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2480 avoids printing a delay slot in a delay slot.
2481 * sh-opc.h (sh_table): Fully bracket last entry.
2483 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2485 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2487 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2489 * configure.in: Get host_makefile_frag from ${srcdir}.
2491 * configure.in: Autoconfiscated. Check for string[s].h. Create
2492 config.h from config.in. Don't set up sysdep.h link.
2493 * sysdep.h: New file.
2494 * configure, config.in: New files, generated from configure.in.
2495 * Makefile.in: Updated to be processed autoconf-style.
2496 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2497 (Makefile): Depend on config.status.
2498 (config.status): New rule.
2499 * configure.bat: Update Makefile substitutions.
2501 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2503 * mips-opc.c (L1): Define.
2504 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2505 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2508 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2510 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2511 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2512 have multiple add units but only a single logical unit.
2514 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2515 shifted by 18, without any insertion or extraction function.
2516 (insert_cr, extract_cr): Remove.
2518 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2520 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2523 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2525 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2526 * sh-opc.h: Add copyright.
2528 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2530 * Makefile.in (crunch-m68k): Delete extra target accidentally
2531 checked in a while ago.
2533 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2535 * sh-opc.h (sh_table): Add SH3 support.
2537 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2539 * sh-opc.h: Added bsrf and braf.
2541 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2543 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2544 bogus [ls]fm{ea,fd} patterns.
2546 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2547 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2548 initialize it from memory. Make function static.
2549 (print_insn_{big,little}_arm): New functions.
2550 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2551 the correct endianness.
2553 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2555 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2558 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2560 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2561 17th, so that it builds again using GCC as the compiler.
2563 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2565 * mips-dis.c (print_insn_little_mips): Cast return value from
2566 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2567 expects an unsigned long, and that might be fewer words of
2568 argument storage (e.g., if bfd_vma is long long on a 32-bit
2570 (print_insn_big_mips): Likewise with bfd_getb32 value.
2571 (_print_insn_mips): Now static.
2573 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2575 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2576 gcc memory hog problem with initializer is fixed.
2578 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2580 Merge in support for Mac MPW as a host.
2581 (Old change descriptions retained for informational value.)
2583 * mpw-config.in (archname): Compute from the config.
2584 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2586 * mpw-config.in (target_arch): Compute from canonical target.
2587 (m68k, mips, powerpc, sparc): Add architectures.
2588 * mpw-make.in (disassemble.c.o): Add.
2589 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2591 * mpw-config.in (BFD_MACHINES): Set to a default value.
2592 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2594 * mpw-make.in (CSEARCH): Add extra-include to search path.
2596 * mpw-config.in (varargs.h): Don't create.
2597 (sysdep.h): Create using forward-include.
2598 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2600 * mpw-config.in: New file, MPW version of configure.in.
2601 * mpw-make.in: New file, MPW version of Makefile.in.
2603 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2605 * alpha-dis.c (print_insn_alpha): Put empty statement after
2608 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2610 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2611 (low_sign_extend): Likewise.
2612 (get_field): Delete unused function.
2613 (set_field, deposit_14, deposit_21): Likewise.
2615 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2617 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2620 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2622 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2624 * alpha-opc.h (OSF_ASMCODE): define
2625 print pal-code names as defined in App C of the
2626 Alpha Architecture Reference Manual
2628 * alpha-dis.c: cleaned up output
2629 print stylized code forms as defined in App A.4.3 of the
2630 Alpha Architecture Reference Manual
2632 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2634 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2636 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2639 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2641 * m68k-dis.c (opcode): New function. Returns address of opcode
2642 table entry given index, even if the opcode table was split to
2643 work around gcc bugs.
2644 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2646 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2647 (reg_names): Now const.
2648 (print_insn_arg): Arrays cacheFieldName and names now const.
2649 (print_indexed): Array scales now const.
2651 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2653 * ppc-opc.c: Sort recently added instructions by minor opcode
2654 number within major opcode number.
2656 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2658 * hppa-dis.c: Include libhppa.h.
2660 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2662 * mips-opc.c: Change dli to use M_DLI, and add dla.
2664 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2666 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2668 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2670 * mips-opc.c: Add r4650 mul instruction.
2672 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2674 * mips-opc.c: Add uld and usd macros for unaligned double load and
2677 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2679 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2680 mfdcr, mtdcr, icbt, iccci.
2682 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2684 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2685 signed char fields to shorts, more portable.
2687 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2689 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2690 char fields as signed chars, since they may have negative values.
2692 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2694 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2695 (mycroft@netbsd.org).
2697 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2699 From "Logg, Ed" <elogg@ea.com>:
2700 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2701 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2704 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2706 * ppc-opc.c: Changes based on patch from David Edelsohn
2707 <edelsohn@mhpcc.edu>.
2708 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2711 (insert_tbr): New static function.
2712 (extract_tbr): New static function.
2713 (XFXFXM_MASK, XFXM): Define.
2714 (XSPRBAT_MASK, XSPRG_MASK): Define.
2715 (powerpc_opcodes): Add instructions to access special registers by
2716 name. Add mtcr and mftbu.
2718 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2720 * mips-opc.c (P3): Define.
2721 (mips_opcodes): Add mad and madu.
2723 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2725 * configure.in: Add W65 support.
2726 * disassemble.c: Likewise.
2727 * w65-opc.h, w65-dis.c: New files.
2729 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2731 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2734 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2736 * mips-opc.c: Add dli as a synonym for li.
2738 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2740 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2741 print something for reserved opcode values, even if it won't
2744 * mips-dis.c (_print_insn_mips): When initializing, shift right
2745 and mask, to avoid sign extension problems on the Alpha.
2747 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2750 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2752 * sh-opc.h (mov.l gbr): Get direction right.
2753 * sh-dis.c (print_insn_shx): New function.
2754 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2755 print opcodes with right byte order.
2757 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2759 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2760 to avoid conflicts with getopt.
2762 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2764 * hppa-dis.c (print_insn_hppa): Read the instruction using
2765 bfd_getb32, so that it works on a little endian or 64 bit host.
2766 Remove unused local variable op.
2768 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2770 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2771 addu does not work correctly if -mips3.
2773 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2775 * a29k-dis.c (print_special): Add special register names defined
2776 on 29030, 29040 and 29050.
2777 (print_insn): Handle new operand type 'I'.
2779 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2781 * Makefile.in (INSTALL): Use top level install.sh script.
2783 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2785 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2786 that it works on a little endian host.
2788 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2790 * configure.in: Use ${config_shell} when running config.bfd.
2792 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2794 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2796 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2798 * a29k-dis.c (print_insn): Print the opcode.
2800 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2802 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2804 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2806 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2808 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2810 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2811 which store a value into memory.
2813 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2815 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2816 * arm-dis.c, arm-opc.h: New files.
2818 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2820 * Makefile.in (ns32k-dis.o): Add dependency.
2821 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2822 string, not as array of chars.
2824 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2826 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2828 * sparc-opc.c: Added sparclite extended FP operations, and
2829 versions of v9 impdep* instructions permitting specification of
2832 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2834 * i960-dis.c (reg_names): Now const.
2835 (struct sparse_tabent): New type, copied from array type in mem
2837 (ctrl): Local static array ctrl_tab now const.
2838 (cobr): Local static array cobr_tab now const.
2839 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2840 static variable mem_tab no longer explicitly initialized. Changed
2841 mem_init to const array of struct sparse_tabent.
2842 (reg): Local static variable reg_tab no longer explicitly
2843 initialized. Changed reg_init to const array of struct
2845 (ea): Local static array scale_tab now const.
2847 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2850 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2852 * configure.bat: the disassember needs to be enabled for
2853 "objdump -d" to work in djgpp.
2855 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2857 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2858 (invalid_float): Enabled general version, doesn't require running
2859 on ns32k host. Changed to take char* argument, and test for
2860 explicitly specified sizes, instead of using sizeof() on host CPU
2862 (INVALID_FLOAT): Cast first argument.
2863 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2864 list_P032, list_M032): Now const.
2865 (optlist, list_search): Made appropriate arguments now point to
2867 (print_insn_arg): Changed static array of one-character-string
2868 pointers into a static const array of characters; fixed sprintf
2869 statement accordingly.
2871 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2873 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2874 from distribution. A ns32k-dis.c from a previous distribution has
2875 been brought up to date and supports the new interface.
2877 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2879 * configure.in: add bfd_ns32k_arch target support.
2881 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2882 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2884 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2886 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2889 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2891 * h8300-dis.c, mips-dis.c: Don't use true and false.
2893 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2895 * configure.in: Change --with-targets to --enable-targets.
2897 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2899 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2900 opcodes to the first instruction with that opcode, to speed
2901 disassembly of large files. From ralphc@pyramid.com (Ralph
2904 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2906 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2908 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2910 * configure.bat: update to latest makefile.in
2912 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2914 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2915 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2916 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2917 slot insn is in a delay slot.
2918 * z8k-opc.h: (resflg): Fix patterns.
2919 * h8500-opc.h Fix CR insn patterns.
2921 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2923 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2924 "cmpl" before POWER versions, so that gas -many uses them.
2926 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2928 * disassemble.c: New file.
2929 * Makefile.in (OFILES): Add disassemble.o.
2930 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2931 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2932 binutils/configure.in.
2934 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2935 opcode being examined.
2937 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2939 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2940 (insert_ral, insert_ram, insert_ras): New functions.
2941 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2942 RAS for store with update.
2944 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2946 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2947 (edelsohn@npac.syr.edu).
2949 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2951 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2954 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2956 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2958 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2960 * ppc-opc.c (powerpc_operands): The signedp field has been
2961 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2962 instead. Add new operand SISIGNOPT.
2963 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2964 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2965 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2968 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2970 * i386-dis.c (struct private): Renamed to dis_private. `private'
2971 is a reserved word for dynix cc.
2973 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2975 * configure.in: Change error message to refer to bfd/config.bfd
2976 rather than bfd/configure.in.
2978 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2980 * ppc-opc.c: Define POWER2 as short alias flag.
2981 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2984 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2986 * i960-dis.c (print_insn_i960): Don't read a second word for
2987 opcodes 0, 1, 2 and 3.
2989 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2991 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2993 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2995 * m68881-ext.c: Removed; no longer used.
2996 * Makefile.in: Changed accordingly.
2998 * m68k-dis.c (ext_format_68881): Don't declare.
2999 (print_insn_m68k): If an instruction uses place 'i', it uses at
3000 least four fixed bytes.
3001 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3002 extended float, convert to double using floatformat_to_double, not
3003 ieee_extended_to_double, and fetch the data before converting it.
3005 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3007 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3008 davidj@ICSI.Berkeley.EDU (David Johnson).
3010 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3012 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3013 PowerPC uses bdnz[l][a].
3015 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3017 * dis-buf.c, i386-dis.c: Include sysdep.h.
3019 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3021 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3023 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3024 by Motorola PowerPC 601 with PPC_OPCODE_601.
3025 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3026 Disassemble Motorola PowerPC 601 instructions as well as normal
3027 PowerPC instructions.
3029 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3031 * i960-dis.c (reg, mem): Just use a static array instead of
3034 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3036 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3037 condition name index if this is for a negated condition.
3039 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3040 Floating point format for 'H' operand is backwards from normal
3041 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3042 operands (fmpyadd and fmpysub), handle bizarre register
3043 translation correctly for single precision format.
3045 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3046 or 'I' operands if the next format specifier is 'M' (fcmp
3047 condition completer).
3049 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3051 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3052 single number giving a bitmask for the MB and ME fields of an M
3053 form instruction. Change NB to accept 32, and turn it into 0;
3054 also turn 0 into 32 when disassembling. Seperated SH from NB.
3055 (insert_mbe, extract_mbe): New functions.
3056 (insert_nb, extract_nb): New functions.
3057 (SC_MASK): Mask out SA and LK bits.
3058 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3059 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3060 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3061 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3062 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3063 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3064 (powerpc_macros): Define table of macro definitions.
3065 (powerpc_num_macros): Define.
3067 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3068 if PPC_OPERAND_NEXT is set.
3070 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3072 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3073 char. Retrieve contents using bfd_getl32 instead of shifting.
3075 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3077 * ppc-opc.c: New file. Opcode table for PowerPC, including
3078 opcodes for POWER (RS/6000).
3079 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3080 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3081 (CFILES): Add ppc-dis.c.
3082 (ppc-dis.o, ppc-opc.o): New targets.
3083 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3085 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3087 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3088 No space before 'u', 'f', or 'N'.
3090 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3092 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3093 farther than we should.
3095 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3097 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3099 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3101 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3103 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3104 needs it, to prevent reading past the end of a section.
3106 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3108 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3109 Removed t,A case for la; always use t,A(b) case.
3111 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3113 From Ted Lemen <mellon@pepper.ncd.com>
3114 * mips-dis.c (print_insn_arg): Handle 'k'.
3115 * mips-opc.c: Make cache use k, not t.
3117 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3119 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3120 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3121 FLOAT_FORMAT_CODE to put out floating point register names.
3123 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3125 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3127 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3129 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3131 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3133 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3134 larger than 32. Moved dsxx32 variants first for disassembler.
3136 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3138 * z8kgen.c, z8k-opc.h: Add full lda information.
3140 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3142 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3143 movb instructions. Any necessary space will be emitted by
3144 the code to handle nullification completers.
3146 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3148 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3150 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3152 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3153 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3155 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3157 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3159 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3161 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3162 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3164 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3166 * m88k-dis.c (m88kdis): comment change. Remove space after
3168 (printop): handle new arg types DEC and XREG for m88110.
3170 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3172 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3173 type for absolute branch addresses. Delete special
3174 "ble" and "be" code in 'W' operand code.
3176 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3178 * mips-opc.c: Set hazard information correctly for branch
3179 likely instructions.
3181 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3183 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3184 info->fprintf_func for printing and info->print_address_func for
3187 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3189 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3191 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3193 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3194 Corrected second case of "b" for disassembler.
3196 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3198 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3199 to BFD swapping routines to correspond to BFD name changes.
3201 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3203 * mips-opc.c: Change div machine instruction to be z,s,t rather
3204 than s,t. Change div macro to be d,v,t rather than d,s,t.
3205 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3206 rem and remu which generates only the corresponding div
3207 instruction. This is for compatibility with the MIPS assembler,
3208 which only generates the simple machine instruction when an
3209 explicit destination of $0 is used.
3210 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3212 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3214 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3215 WR_31 hazard for bal, bgezal, bltzal.
3217 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3219 * hppa-dis.c (print_insn_hppa): Use print function
3220 from within the disassemble_info, not fprintf_filtered.
3222 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3224 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3225 Law, law@cs.utah.edu.)
3227 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3229 * mips-opc.c ("absu"): Removed.
3232 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3234 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3235 Changed hazard information to distinguish between memory load
3236 delays and coprocessor load delays.
3238 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3240 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3242 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3244 * configure.in: Don't pass cpu to config.bfd.
3246 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3248 * m88k-dis.c (m88kdis): Make class unsigned.
3250 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3252 * alpha-dis.c (print_insn_alpha): One branch format case was
3253 missing the instruction name.
3255 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3257 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3258 Add the arch-specific auxiliary files.
3259 (OFILES): Remove the arch-specific auxiliary files
3260 and use BFD_MACHINES instead of DIS_LIBS.
3261 * configure.in: Set BFD_MACHINES based on --with-targets option.
3263 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3265 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3268 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3270 * sparc-opc.c: Change CONST to const to deal with gcc
3271 -Dconst=__const -traditional.
3273 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3275 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3276 coprocessor instructions out of #if 0, and made them use new
3279 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3281 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3283 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3285 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3286 instruction, for use by the disassembler.
3288 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3289 hand-coded sign extensions that depended on 32-bit host ints.
3290 FIXME, we still depend on big-endian host bitfield ordering.
3291 (sparc_print_insn): Set the insn_info_valid field, and the
3292 other fields that describe the instruction being printed.
3294 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3296 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3297 `jmp' instead of just one of them.
3299 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3301 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3302 (fput_fp_reg_r): Renamed from fput_reg_r.
3303 (fput_fp_reg): New function.
3304 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3306 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3308 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3310 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3312 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3314 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3315 don't output a space.
3317 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3319 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3321 * mips-opc.c: New file, containing opcode table from
3322 ../include/opcode/mips.h.
3323 * Makefile.in: Add it.
3325 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3327 * m88k-dis.c: New file, moved in from gdb and changed to use the
3328 new dis-asm.h disassembler interface.
3329 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3330 (m88k-dis.o): New target.
3332 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3334 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3335 argument string const char * to correspond to opcode/mips.h.
3337 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3339 * mips-dis.c: Updated to account for name changes in new version
3341 * Makefile.in: Added header file dependencies.
3343 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3345 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3347 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3349 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3350 extend, rather than shifts.
3352 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3354 * Makefile.in: Undo 15 June change.
3356 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3358 * m68k-dis.c (print_insn_arg): Change return value to byte count
3360 * m68k-dis.c: Re-write to detect invalid operands before
3361 printing anything, so we can handle this the same way we
3362 handle invalid opcodes.
3364 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3366 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3368 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3370 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3373 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3375 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3377 * configure.in: Do make sysdep.h link.
3378 * Makefile.in: Search ../include. Don't search ../bfd.
3380 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3382 Changes from Jeff Law, law@cs.utah.edu:
3383 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3384 Do not print a space before the completers specified by
3387 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3389 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3390 defined, since gdb has been fixed.
3392 Changes from Jeff Law, law@cs.utah.edu:
3393 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3394 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3395 be a *disassemble_info, not a *FILE.
3396 * hppa-dis.c: Support 'd', '!', and 'a'.
3397 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3398 * hppa-dis.c: Delete cases which are no longer needed.
3400 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3402 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3404 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3406 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3409 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3411 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3412 * configure.in: No longer need to configure to get sysdep.h.
3414 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3416 * Patches from Jeffrey Law <law@cs.utah.edu>.
3417 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3418 templates for 1.1 FP computational instructions.
3420 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3422 * h8500-dis.c (print_insn_h8500): Address argument is type
3424 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3427 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3428 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3430 * sparc-dis.c (compare_opcodes): Move static declaration to
3433 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3435 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3436 instruction, remove unimp hack from 'l' argument.
3438 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3440 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3443 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3445 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3446 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3449 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3451 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3452 arrays of string pointers to 2-d arrays of chars, to save
3455 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3457 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3458 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3460 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3462 * hppa-dis.c: New file from Utah, adapted to new disassembler
3464 * Makefile.in: Include it.
3466 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3468 * sh-dis.c, sh-opc.h: New files.
3470 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3472 * alpha-dis.c, alpha-opc.h: New files.
3474 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3476 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3479 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3481 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3483 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3485 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3488 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3490 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3491 and double percent signs a few places.
3493 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3495 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3496 Use info->print_address_func not print_address.
3498 * dis-buf.c (generic_print_address): New function.
3500 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3502 * Makefile.in: Add sparc-dis.c.
3503 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3505 Add `add' instruction to the set that get checked
3506 for a preceding `sethi' in order to print an absolute address.
3507 * (print_insn): Disassembly prefers real instructions.
3508 (is_delayed_branch): Speed up.
3509 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3510 Still missing some float ops, and needs testing.
3511 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3512 F_ALIAS. Use printf, not fprintf, when not passing a file
3514 (compare_opcodes): Check that identical instructions have
3515 identical opcodes, complain otherwise.
3518 * Include reg_names.
3520 Use dis-asm.h/read_memory_func interface.
3522 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3524 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3525 deliberately return non-zero to setjmp from longjmp. Otherwise
3526 this code fails to compile.
3528 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3530 * m68k-dis.c: Fix prototype for fetch_arg().
3532 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3534 * dis-buf.c: New file, for new read_memory_func interface.
3535 Makefile.in (OFILES): Include it.
3536 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3537 Use new read_memory_func interface.
3539 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3541 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3542 * h8500-opc.h: Fix couple of opcodes.
3544 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3546 * Makefile.in: add dvi & installcheck targets
3548 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3550 * Makefile.in: Update for h8500-dis.c.
3552 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3554 * h8500-dis.c, h8500-opc.h: New files
3556 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3558 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3559 ../include/dis-asm.h.
3560 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3561 and ../gdb/m68k-pinsn.c).
3562 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3563 and ../gdb/i386-pinsn.c).
3564 * m68881-ext.c: New file. Moved definition of
3565 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3566 * Makefile.in: Adjust for new files.
3567 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3568 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3569 can be dis-assembled.
3571 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3573 * mips-dis.c (print_insn_arg): Now returns void.
3575 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3577 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3578 files that use the macros.
3580 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3582 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3583 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3584 (CFILES): Added mips-dis.c.
3586 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3588 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3589 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3591 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3593 * Makefile.in: Improve *clean rules.
3594 * configure.in: Allow a default host.
3596 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3598 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3599 files include other sysdep files
3601 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3603 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3605 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3607 * configure.in: For host support, use ../bfd/configure.host
3608 so it stays in sync with the ../bfd/hosts database.
3610 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3612 * configure.in: use cpu-vendor-os triple instead of nested cases
3614 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3616 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3617 *always* the wrong one.
3619 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3621 * z8kgen.c: added copyright info
3623 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3625 * z8k-dis.c (unparse_instr): prettier tabs
3626 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3628 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3630 * configure.in: Add ncr* configuration.
3631 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3632 picayune ANSI compilers happy.
3634 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3636 * configure.in (i386): Make i386 and i486 synonymous for now.
3637 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3639 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3641 * Makefile.in (install): Fix typo.
3643 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3645 * Makefile.in (make): Remove obsolete crud.
3646 (sparc-opc.o): Avoid Sun Make VPATH bug.
3648 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3650 * Makefile.in: since there are no SUBDIRS, remove rule and
3651 references of subdir_do.
3653 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3655 * Makefile.in (install): Get the library name right here too.
3656 Don't install bfd.h, since it's unrelated to this library. No
3657 subdirs to recurse into, either.
3658 (CFILES): The source file has a .c suffix, not .o.
3660 * sparc-opc.c: New file, moved from BFD.
3661 * Makefile.in (OFILES): Build it.
3663 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3665 * z8k-dis.c: fixed forward refferences of some declarations.
3667 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3669 * Makefile.in: get the name of the library right
3671 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3673 * z8k-dis.c: knows how to disassemble z8k stuff
3674 * z8k-opc.h: new file full of z8000 opcodes
3678 version-control: never