1 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
3 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
5 2009-09-29 DJ Delorie <dj@redhat.com>
7 * Makefile.am: Add RX files.
8 * configure.in: Add support for RX target.
9 * disassemble.c: Likewise.
10 * Makefile.in: Regenerate.
11 * configure: Regenerate.
13 * rx-decode.c: New file.
14 * rx-decode.opc: New file.
17 2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
19 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
20 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
22 2009-09-25 Michael Eager <eager@eagercon.com>
24 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
25 microblaze_decode_insn): Add declarations.
26 (get_delay_slots_microblaze): Remove.
28 2009-09-25 Martin Thuresson <martint@google.com>
30 Update soruces to make arc and arm targets compile cleanly with
32 * arc-dis.c Fix casts.
33 * arc-ext.c: Add casts.
34 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
37 2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
39 * i386-gen.c (opcode_modifiers): Remove Vex256.
40 (set_bitfield): Handle XXX=V.
42 * i386-opc.h (Vex): Update comments.
45 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
47 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
48 * i386-tbl.h: Regenerated.
50 2009-09-23 Nick Clifton <nickc@redhat.com>
52 * po/fr.po: Updated French translation.
54 2009-09-21 Ben Elliston <bje@au.ibm.com>
55 Peter Bergner <bergner@vnet.ibm.com>
57 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
58 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
59 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
60 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
62 (ERAT_T): New operand.
67 2009-09-18 Nick Clifton <nickc@redhat.com>
69 * po/es.po: Updated Spanish translation.
70 * po/vi.po: Updated Vietnamese translation.
72 2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
74 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
77 2009-09-14 Nick Clifton <nickc@redhat.com>
79 * po/nl.po: Updated Dutch translation.
81 2009-09-11 Nick Clifton <nickc@redhat.com>
83 * po/opcodes.pot: Updated by the Translation project.
85 2009-09-11 Martin Thuresson <martint@google.com>
87 Updated sources to compile cleanly with -Wc++-compat:
88 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
89 * ldcref.c: Add casts.
90 * ldctor.c: Add casts.
92 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
93 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
94 * ldlang.h (enum statement_enum): Move to top level.
95 * ldmain.c: Add casts.
96 * ldwrite.c: Add casts.
97 * lexsup.c: Add casts. (enum control_enum): Move to top level.
98 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
100 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
102 * s390-dis.c (print_insn_s390): Avoid 'long long'.
104 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
106 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
107 (print_insn_s390): Signextend and shift pcrel operands before printing.
109 2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
111 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
112 VEX_LEN_AE_R_X_M_0 in comments.
114 2009-09-08 DJ Delorie <dj@redhat.com>
116 * mep-opc.c: Regenerate.
118 2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
120 * z8kgen.c (struct op): Replace unused flavor with id.
121 (opt): Remove extra xorb entry.
122 (func): Use id field as fallback.
123 (sub): Return new string, caller changed.
124 (internal): Allocate end marker. Assign unique id before sorting.
125 (gas): Likewise. Fix loop end condition.
126 * z8k-opc.h: Regenerate.
128 2009-09-08 Alan Modra <amodra@bigpond.net.au>
130 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
132 2009-09-07 Alan Modra <amodra@bigpond.net.au>
134 * z8kgen.c (func): Fix thinko last patch.
136 2009-09-07 Alan Modra <amodra@bigpond.net.au>
138 * z8kgen.c (func): Stabilize qsort of identically named entries.
139 * z8k-opc.h: Regenerate.
141 2009-09-07 Tristan Gingold <gingold@adacore.com>
143 * po/opcodes.pot: Regenerate.
145 2009-09-07 Alan Modra <amodra@bigpond.net.au>
147 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
148 * configure: Regenerate.
149 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
150 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
151 (i386-gen, ia64-gen, z8kgen): ..here.
152 * Makefile.in: Regenerate.
154 2009-09-07 Tristan Gingold <gingold@adacore.com>
156 * z8k-opc.h: Regenerate.
158 2009-09-05 Martin Thuresson <martin@mtme.org>
160 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
161 * m88k-dis.c (m88kdis): Rename variable class to in_class.
162 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
163 Rename argument class to symbol_class.
165 2009-09-04 Jie Zhang <jie.zhang@analog.com>
167 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
168 to the new encoding of DBGA, DBGAH, and DBGAL.
169 (_print_insn_bfin): Likewise.
171 2009-09-03 Jie Zhang <jie.zhang@analog.com>
173 * bfin-dis.c (_print_insn_bfin): Don't declare.
174 (print_insn_bfin): Don't declare.
175 (dregs_pair): Remove.
176 (ignore_bits): Remove.
179 2009-09-03 Jie Zhang <jie.zhang@analog.com>
181 * bfin-dis.c (IS_DREG): Define.
187 (decode_REGMV_0): Check illegal register move instructions.
189 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
191 * Makefile.am (BUILD_LIBINTL): New variable.
192 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
193 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
194 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
195 * Makefile.in: Regenerate.
197 2009-09-01 DJ Delorie <dj@redhat.com>
199 * mep-asm.c: Regenerate.
200 * mep-desc.c: Regenerate.
201 * mep-opc.c: Regenerate.
203 2009-09-01 Tristan Gingold <gingold@adacore.com>
205 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
206 dependencies. Remove unused FORMAT variable.
207 * configure.com: New file to create build.com DCL script for
208 Itanium VMS or Alpha VMS.
210 2009-08-29 Martin Thuresson <martin@mtme.org>
212 * cris-dis.c (bytes_to_skip): Update code to use new name.
213 * i386-dis.c (putop): Update code to use new name.
214 * i386-gen.c (process_i386_opcodes): Update code to use
216 * i386-opc.h (struct template): Rename struct template to
217 insn_template. Update code accordingly.
218 * i386-tbl.h (i386_optab): Update type to use new name.
219 * ia64-dis.c (print_insn_ia64): Rename variable template
221 * tic30-dis.c (struct instruction, get_tic30_instruction):
222 Update code to use new name.
223 * tic54x-dis.c (has_lkaddr, get_insn_size)
224 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
225 Update code to use new name.
226 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
227 Update type to new name.
228 * z8kgen.c (internal, gas): Rename variable new to new_op.
230 2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
232 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
233 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
234 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
235 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
236 * Makefile.in: Regenerated.
238 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
240 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
241 [INSTALL_LIBBFD]: ... here, ...
242 [INSTALL_LIBBFD]: ... and empty overrides here.
243 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
244 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
245 * Makefile.in: Regenerate.
246 * configure: Regenerate.
248 2009-08-26 Philippe De Muyter <phdm@macqel.be>
250 * m68k-dis.c (print_insn_arg): Add movecr register names for
251 coldfire v4e families.
253 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
255 * Makefile.am (SUBDIRS): Build '.' before 'po'.
256 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
257 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
258 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
259 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
260 (i386-gen.o): New rule.
261 ($(srcdir)/i386-init.h): Adjust.
262 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
263 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
264 (ia64-gen.o): New rule.
265 (ia64_asmtab_deps): New variable.
266 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
267 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
268 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
270 (s390-opc.tab): Adjust.
271 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
273 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
274 * Makefile.in: Regenerate.
275 * z8kgen.c (gas): Avoid '/*' in comment.
276 * z8k-opc.h (func): Regenerate.
278 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
280 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
281 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
282 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
283 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
285 (LIBOPCODES_CFILES): New variable, adding to
286 TARGET_LIBOPCODES_CFILES also non-target library sources.
287 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
289 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
290 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
291 * Makefile.in: Regenerate.
292 * po/POTFILES.in: Regenerate.
294 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
296 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
297 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
298 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
299 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
300 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
301 is built shared even if it is not to be installed.
302 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
303 (install_libopcodes, uninstall_libopcodes): Remove.
304 (AM_CPPFLAGS): Renamed from ...
305 (INCLUDES): ... this.
306 * Makefile.in: Regenerate.
308 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
309 1.11, foreign, no-dist.
310 (MKDEP, m32c_opc_h): Remove variables.
311 (disassemble.lo): Rewrite using automake-style dependency
312 tracking rules; only list the dependency upon the primary source
313 file, but no included headers.
314 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
315 (i386-gen.o, ia64-gen.o): Remove dependency statements.
316 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
317 ensure all dependency fragments are included in the Makefile.
318 (s390-opc.lo): Depend on s390-opc.tab.
319 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
320 (mkdep section): Remove.
321 * Makefile.in: Regenerate.
322 * po/POTFILES.in: Regenerate.
324 * Makefile.am (install-pdf, install-html): Remove.
325 * Makefile.in: Regenerate.
327 * Makefile.in: Regenerate.
328 * aclocal.m4: Likewise.
329 * config.in: Likewise.
330 * configure: Likewise.
332 2009-08-06 Michael Eager <eager@eagercon.com>
334 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
335 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
336 * Makefile.in: Regenerate.
337 * configure.in: Add bfd_microblaze_arch target.
338 * configure: Regenerate.
339 * disassemble.c: Define ARCH_microblaze, return
340 print_insn_microblaze().
341 * microblaze-dis.c: New MicroBlaze disassembler.
342 * microblaze-opc.h: New MicroBlaze opcode definitions.
343 * microblaze-opcm.h: New MicroBlaze opcode types.
345 2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
347 * configure.in: Handle bfd_l1om_arch.
348 * disassemble.c (disassembler): Likewise.
350 * configure: Regenerated.
352 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
353 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
355 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
357 (cpu_flags): Add CpuL1OM.
358 (set_bitfield): Take an argument to set the value field.
359 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
360 (process_i386_opcode_modifier): Updated.
361 (process_i386_operand_type): Likewise.
362 * i386-init.h: Regenerated.
363 * i386-tbl.h: Likewise.
365 * i386-opc.h (CpuL1OM): New.
367 (i386_cpu_flags): Add cpul1om.
369 2009-07-24 Jan Beulich <jbeulich@novell.com>
371 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
373 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
374 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
375 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
376 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
378 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
380 * i386-opc.tbl: Qualify floating point instructions by their
381 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
382 and fsincos to be avilable only on 387. Fix fstsw ax to be
383 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
385 * i386-init.h, i386-tbl.h: Regenerate.
387 2009-07-20 Nick Clifton <nickc@redhat.com>
390 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
391 offset or indexed based addressing mode 3.
393 2009-07-14 Nick Clifton <nickc@redhat.com>
396 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
398 (arm_decode_shift): Catch illegal register based shifts.
399 (print_insn_arm): Properly handle negative register r0
400 post-indexed addressing.
402 2009-07-10 Doug Kwan <dougkwan@google.com>
404 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
405 lower 32 bits of long types to make hexadecimal output consistent
406 on both 32-bit and 64-bit hosts.
408 2009-07-10 Alan Modra <amodra@bigpond.net.au>
410 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
411 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
412 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
413 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
414 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
415 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
416 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
417 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
418 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
419 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
420 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
421 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
423 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
425 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
427 2009-07-07 Nick Clifton <nickc@redhat.com>
430 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
433 2009-07-06 DJ Delorie <dj@redhat.com>
435 * mep-desc.c: Regenerate.
436 * mep-desc.h: Regenerate.
437 * mep-opc.c: Regenerate.
438 * mep-opc.h: Regenerate.
440 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
442 * i386-opc.h (CpuFMA4): Add CpuFMA4.
443 (i386_cpu_flags): New.
444 * i386-gen.c: Add CPU_FMA4_FLAGS.
445 * i386-opc.tbl: Add FMA4 instructions.
446 * i386-tbl.h: Regenerate.
447 * i386-init.h: Regenerate.
448 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
449 (OP_XMM_VexW): Ditto.
451 (VEXI4_Fixup): Ditto.
452 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
453 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
454 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
455 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
456 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
457 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
458 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
459 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
460 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
461 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
462 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
463 (get_vex_imm8): New. handle FMA4.
464 (OP_EX_VexReg): Ditto.
466 2009-06-30 Nick Clifton <nickc@redhat.com>
469 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
470 LFM and SFM instructions as comments,.
471 Improve consistency of formatting for instructions displayed as
472 comments and decimal values displayed with their hexadecimal
476 2009-06-29 Nick Clifton <nickc@redhat.com>
479 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
480 boundary between variaant and generic coprocessor instuctions.
481 (coprocessor): Use it.
482 Fix architecture version of MCRR and MRRC instructions.
483 (arm_opcdes): Fix patterns for STRB and STRH instructions.
484 (print_insn_coprocessor): Check architecture and extension masks.
485 Print a hexadecimal version of any decimal constant that is
486 outside of the range of -16 to +32.
487 (print_arm_address): Add a return value of the offset used in the
488 adress, if it is worth printing a hexadecimal version of it.
489 (print_insn_neon): Print a hexadecimal version of any decimal
490 constant that is outside of the range of -16 to +32.
491 (print_insn_arm): Likewise.
492 (print_insn_thumb16): Likewise.
493 (print_insn_thumb32): Likewise.
496 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
497 of an undefined instruction.
498 (arm_opcodes): Use it.
499 (thumb_opcod): Use it.
500 (thumb32_opc): Use it.
502 2009-06-23 DJ Delorie <dj@redhat.com>
504 * mep-desc.c: Regenerate.
505 * mep-desc.h: Regenerate.
506 * mep-dis.c: Regenerate.
507 * mep-ibld.c: Regenerate.
508 * mep-opc.c: Regenerate.
510 * mep-asm.c: Regenerate.
511 * mep-opc.c: Regenerate.
512 * mep-opc.h: Regenerate.
514 2009-06-22 Nick Clifton <nickc@redhat.com>
516 * po/fi.po: Updated Finish translation.
518 2009-06-22 Alan Modra <amodra@bigpond.net.au>
520 * m32c-asm.c: Regenerate.
522 2009-06-22 Alan Modra <amodra@bigpond.net.au>
524 * score-dis.c (print_insn_score48, print_insn_score32): Move default
525 case label to proper lexical block.
526 * score7-dis.c (print_insn_score32): Likewise.
528 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
530 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
531 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
532 * s390-opc.txt (nopr, nop): Use new instruction format.
534 2009-06-18 Nick Clifton <nickc@redhat.com>
537 * arm-dis.c (print_insn_coprocessor): Check that a user specified
538 ARM architecture supports the matched instruction.
539 (print_insn_arm): Likewise.
540 (select_arm_features): New function. Fills in the fields of an
541 arm_feature_set structure based on a given arm machine number.
542 (print_insn): Initialise an arm_feature_set structure.
544 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
546 * vax-dis.c (is_function_entry): Return success for synthetic
548 (is_plt_tail): New function.
549 (print_insn_vax): Decode PLT entry offset longword.
551 2009-06-15 Nick Clifton <nickc@redhat.com>
554 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
558 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
560 2009-06-15 Nick Clifton <nickc@redhat.com>
563 * arm-dis.c (print_insn): Ignore is_data if the user has requested
564 the disassembly of data as well as instructions.
566 2009-06-11 Doug Evans <dje@sebabeach.org>
568 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
570 2009-06-11 Anthony Green <green@moxielogic.com>
572 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
573 (moxie_form3_opc_info): Add branch instructions.
574 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
575 encoded instructions.
577 2009-06-06 Anthony Green <green@moxielogic.com>
579 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
580 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
582 2009-06-04 Alan Modra <amodra@bigpond.net.au>
584 * dep-in.sed: Don't use \n in replacement part of s command.
585 * Makefile.am (DEP1): LC_ALL for uniq.
586 * Makefile.in: Regenerate.
588 2009-06-02 Nick Clifton <nickc@redhat.com>
590 * po/nl.po: Updated Dutch translation.
592 2009-06-02 Tristan Gingold <gingold@adacore.com>
594 * ia64-gen.c (parse_resource_users, print_dependency_table,
595 add_dis_table_ent, finish_distable, insert_bit_table_ent,
596 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
597 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
598 insert_completer_entry, print_completer_entry, print_completer_table,
599 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
601 2009-05-28 DJ Delorie <dj@redhat.com>
603 * mep-asm.c: Regenerate.
604 * mep-desc.c: Regenerate.
606 2009-05-26 DJ Delorie <dj@redhat.com>
608 * mep-asm.c: Regenerate.
609 * mep-desc.c: Regenerate.
610 * mep-desc.h: Regenerate.
611 * mep-dis.c: Regenerate.
612 * mep-ibld.c: Regenerate.
613 * mep-opc.c: Regenerate.
614 * mep-opc.h: Regenerate.
616 2009-05-26 Nick Clifton <nickc@redhat.com>
618 * po/id.po: Updated Indonesian translation.
619 * po/opcodes.pot: Updated template file.
621 2009-05-26 Alan Modra <amodra@bigpond.net.au>
623 * dep-in.sed: Don't modify .o to .lo here. Output one filename
624 per line with all lines having continuation backslash. Prefix
625 first line with "A", following lines with "B".
626 * Makefile.am (DEP): Don't use dep.sed here.
627 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
628 dep.sed here on dependencies, sort and uniq.
629 * Makefile.in: Regenerate.
631 2009-05-25 Tristan Gingold <gingold@adacore.com>
633 * makefile.vms (OPT): New variable.
634 (CFLAGS): Update compilation flags.
636 2009-05-22 DJ Delorie <dj@redhat.com>
638 * mep-asm.c: Regenerate.
639 * mep-desc.c: Regenerate.
640 * mep-desc.h: Regenerate.
641 * mep-dis.c: Regenerate.
642 * mep-ibld.c: Regenerate.
643 * mep-opc.c: Regenerate.
644 * mep-opc.h: Regenerate.
646 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
648 * i386-opc.h (Cpusse5): Delete.
649 (i386_cpu_flags): Delete.
650 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
651 * i386-opc.tbl: Remove SSE5 instructions.
652 * i386-tbl.h: Regenerate.
653 * i386-init.h: Regenerate.
654 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
655 (print_drex_arg): Delete.
658 (OP_DREX_ICMP): Delete.
659 (OP_DREX_FCMP): Delete.
661 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
663 2009-05-22 Alan Modra <amodra@bigpond.net.au>
665 * Makefile.am: Run "make dep-am".
666 * Makefile.in: Regenerate.
667 * po/POTFILES.in: Regenerate.
669 2009-05-19 DJ Delorie <dj@redhat.com>
671 * mep-asm.c: Regenerate.
672 * mep-opc.c: Regenerate.
674 2009-04-30 DJ Delorie <dj@redhat.com>
676 * mep-asm.c: Regenerate.
677 * mep-desc.c: Regenerate.
678 * mep-desc.h: Regenerate.
679 * mep-dis.c: Regenerate.
680 * mep-ibld.c: Regenerate.
681 * mep-opc.c: Regenerate.
682 * mep-opc.h: Regenerate.
684 2009-04-17 DJ Delorie <dj@redhat.com
686 * mep-desc.c: Regenerate.
687 * mep-ibld.c: Regenerate.
688 * mep-opc.c: Regenerate.
689 * mep-opc.h: Regenerate.
691 2009-04-15 Anthony Green <green@moxielogic.com>
693 * moxie-opc.c, moxie-dis.c: Created.
694 * Makefile.am: Build the moxie source files.
695 * configure.in: Add moxie support.
696 * Makefile.in, configure: Rebuilt.
697 * disassemble.c (disassembler): Add moxie support.
698 (ARCH_moxie): Define.
700 2009-04-15 Jan Beulich <jbeulich@novell.com>
702 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
704 (pshab, pshaw, pshad, pshaq): Likewise.
705 * i386-tbl.h: Re-generate.
707 2009-04-08 DJ Delorie <dj@redhat.com
709 * mep-asm.c: Regenerate.
710 * mep-desc.c: Regenerate.
711 * mep-desc.h: Regenerate.
712 * mep-dis.c: Regenerate.
713 * mep-ibld.c: Regenerate.
714 * mep-opc.c: Regenerate.
715 * mep-opc.h: Regenerate.
717 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
719 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
720 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
721 Reorder entries so the extended mnemonics are listed before tlbilx.
723 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
725 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
727 (print_insn_powerpc): Make sure we only deprecate instructions using
728 the original dialect and not a modified dialect due to -Many handling.
729 Move the handling of the condition register and default operands to
730 the end of the if/else if/else chain.
731 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
732 instructions from newer processors are listed before older ones.
733 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
734 that have instructions with conflicting opcodes.
736 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
738 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
741 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
743 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
745 2009-03-30 Joseph Myers <joseph@codesourcery.com>
747 * arm-dis.c (print_insn): Also check section matches in backwards
748 search for mapping symbol.
750 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
752 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
754 2009-03-18 Alan Modra <amodra@bigpond.net.au>
756 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
757 * Makefile.am: Run "make dep-am".
758 * Makefile.in: Regenerate.
759 * openrisc-opc.c: Regenerate.
761 2009-03-10 Nick Clifton <nickc@redhat.com>
763 * po/id.po: Updated Indonesian translation.
765 2009-03-10 Alan Modra <amodra@bigpond.net.au>
767 * ppc-dis.c: Include "opintl.h".
768 (struct ppc_mopt, ppc_opts): New.
769 (ppc_parse_cpu): New function.
770 (powerpc_init_dialect): Use it.
771 (print_ppc_disassembler_options): Dump options from ppc_opts.
772 Internationalize message.
774 2009-03-06 Nick Clifton <nickc@redhat.com>
776 * po/es.po: Updated Spanish translation.
778 2009-03-04 Alan Modra <amodra@bigpond.net.au>
781 * configure.in: Test for ld --as-needed support. Link shared
782 libopcodes against libm.
783 * configure: Regenerate.
785 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
787 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
788 instructions from newer processors are listed before older ones.
790 2009-03-03 Alan Modra <amodra@bigpond.net.au>
792 * Makefile.am: Run "make dep-am".
793 (HFILES): Move lm32-desc.h and lm32-opc.h from..
795 * Makefile.in: Regenerate.
797 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
799 * score7-dis.c: New file.
800 * Makefile.am: Add dependencies for score7-dis.c.
801 * Makefile.in: Regenerate.
802 * configure.in: Add score7-dis to score files.
803 * configure: Regenerate.
804 * score-dis.c: Add support for score7 architecture.
805 * score-opc.h: Likewise.
807 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
809 * configure: Regenerate.
811 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
813 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
815 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
817 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
818 the power7 and the isel instructions.
819 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
820 (insert_dm, extract_dm): Likewise.
821 (XB6): Update comment to include XX2 form.
822 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
823 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
824 (RemoveXX3DM): Delete.
825 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
826 "mftgpr">: Deprecate for POWER7.
827 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
828 "frsqrte.">: Deprecate the three operand form and enable the two
829 operand form for POWER7 and later.
830 <"wait">: Extend to accept optional parameter. Enable for POWER7.
831 <"waitsrv", "waitimpl">: Add extended opcodes.
832 <"ldbrx", "stdbrx">: Enable for POWER7.
833 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
834 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
835 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
836 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
837 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
838 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
839 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
840 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
841 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
842 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
843 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
844 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
845 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
846 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
847 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
848 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
849 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
850 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
851 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
852 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
853 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
854 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
855 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
856 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
857 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
858 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
859 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
860 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
861 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
862 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
863 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
864 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
865 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
866 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
867 "xxspltw", "xxswapd">: Add VSX opcodes.
869 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
871 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
872 (operand_types): Remove Vex_Imm4.
874 * i386-opc.h (Vex_Imm4): Removed.
876 (i386_operand_type): Remove vex_imm4.
878 * i386-opc.tbl: Remove Vex_Imm4 comments.
879 * i386-init.h: Regenerated.
880 * i386-tbl.h: Likewise.
882 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
884 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
885 vq{r}shr{u}n.s64 insnstructions.
887 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
889 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
890 operand to be a float point register (FRT/FRS).
892 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
894 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
895 dmfc2 and dmtc2 before the architecture-level variants.
897 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
899 * fr30-opc.c: Regenerate.
900 * frv-opc.c: Regenerate.
901 * ip2k-opc.c: Regenerate.
902 * iq2000-opc.c: Regenerate.
903 * lm32-opc.c: Regenerate.
904 * m32c-opc.c: Regenerate.
905 * m32r-opc.c: Regenerate.
906 * mep-opc.c: Regenerate.
907 * mt-opc.c: Regenerate.
908 * xc16x-opc.c: Regenerate.
909 * xstormy16-opc.c: Regenerate.
910 * tic54x-dis.c (print_instruction): Avoid compiler warning on
913 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
915 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
917 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
919 * ppc-opc.c: Update copyright year.
920 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
921 ordering for POWER4 and later and use the correct Server ordering.
923 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
925 AVX Programming Reference (January, 2009)
926 * i386-dis.c (PREFIX_VEX_3A44): New.
927 (VEX_LEN_3A44_P_2): Likewise.
928 (PREFIX_VEX_3A48): Updated.
929 (VEX_LEN_3A4C_P_2): Likewise.
930 (prefix_table): Add PREFIX_VEX_3A44.
931 (vex_table): Likewise.
932 (vex_len_table): Add VEX_LEN_3A44_P_2.
934 * i386-opc.tbl: Add PCLMUL + AVX instructions.
935 * i386-tbl.h: Regenerated.
937 2009-02-03 Sandip Matte <sandip@rmicorp.com>
939 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
940 (mips_arch_choices): Add XLR entry.
941 * mips-opc.c (XLR): Define.
942 (mips_builtin_opcodes): Add XLR instructions.
944 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
946 * Makefile.am: Add install-pdf target.
947 * po/Make-in: Add install-pdf target.
948 * Makefile.in: Regenerate.
950 2009-02-02 DJ Delorie <dj@redhat.com>
952 * mep-asm.c: Regenerate.
953 * mep-desc.c: Regenerate.
954 * mep-desc.h: Regenerate.
955 * mep-dis.c: Regenerate.
956 * mep-ibld.c: Regenerate.
957 * mep-opc.c: Regenerate.
958 * mep-opc.h: Regenerate.
960 2009-01-29 Mark Mitchell <mark@codesourcery.com>
962 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
965 2009-01-28 Chao-ying Fu <fu@mips.com>
967 * mips-opc.c (suxc1): Add the flag of FP_D.
969 2009-01-20 Alan Modra <amodra@bigpond.net.au>
971 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
972 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
973 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
974 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
975 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
976 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
977 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
978 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
980 2009-01-16 Alan Modra <amodra@bigpond.net.au>
982 * configure.in (commonbfdlib): Delete.
983 (SHARED_LIBADD): Add pic libiberty if such is available.
984 * configure: Regenerate.
985 * po/POTFILES.in: Regenerate.
987 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
989 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
990 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
991 operand form and enable the four operand form for POWER6 and later.
992 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
993 three operand form for POWER6 and later.
995 2009-01-14 Mike Frysinger <vapier@gentoo.org>
997 * bfin-dis.c (OUTS): Use "%s" as format string.
999 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1001 * i386-gen.c (cpu_flag_init): Remove a white space.
1002 (operand_type_init): Likewise.
1004 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1006 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1007 * i386-tbl.h: Regenerated.
1009 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1011 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1012 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1013 subS, xorS and cmpS.
1015 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1017 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1018 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1019 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1020 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1023 (set_bitfield): Take an argument, lineno. Don't report lineno
1024 on error if it is -1.
1025 (process_i386_cpu_flag): Take an argument, lineno.
1026 (process_i386_opcode_modifier): Likewise.
1027 (process_i386_operand_type): Likewise.
1028 (output_i386_opcode): Likewise.
1029 (opcode_hash_entry): Add lineno.
1030 (process_i386_opcodes): Updated.
1031 (process_i386_registers): Likewise.
1032 (process_i386_initializers): Likewise.
1034 * i386-opc.h (CpuP4): Removed.
1038 (CpuSYSCALL): Likewise.
1040 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1041 cpuclflush and cpusyscall.
1043 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1045 * i386-init.h: Regenerated.
1046 * i386-tbl.h: Likewise.
1048 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1050 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1051 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1052 (cpu_flags): Add CpuRdtscp.
1053 (set_bitfield): Remove CpuSledgehammer check.
1055 * i386-opc.h (CpuRdtscp): New.
1057 (i386_cpu_flags): Add cpurdtscp.
1059 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1060 * i386-init.h: Regenerated.
1061 * i386-tbl.h: Likewise.
1063 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1065 * ppc-opc.c (PPCNONE): Define.
1067 (powerpc_opcodes): Initialize the new "deprecated" field.
1069 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1071 AVX Programming Reference (December, 2008)
1072 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1073 (VEX_LEN_E7_P_2_M_0): Likewise.
1074 (VEX_LEN_2C_P_1): Updated.
1075 (VEX_LEN_E8_P_2): Likewise.
1076 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1077 (mod_table): Likewise.
1079 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1080 * i386-tbl.h: Regenerated.
1082 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1084 * i386-gen.c (process_copyright): Update for 2009.
1086 * i386-init.h: Regenerated.
1087 * i386-tbl.h: Likewise.
1089 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1091 AVX Programming Reference (December, 2008)
1092 * i386-dis.c (OP_VEX_FMA): Removed.
1093 (OP_EX_VexW): Likewise.
1094 (OP_EX_VexImmW): Likewise.
1095 (OP_XMM_VexW): Likewise.
1096 (VEXI4_Fixup): Likewise.
1097 (VPERMIL2_Fixup): Likewise.
1100 (Vex128FMA): Likewise.
1102 (EXdVexW): Likewise.
1103 (EXqVexW): Likewise.
1104 (EXVexImmW): Likewise.
1106 (VPERMIL2): Likewise.
1107 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1108 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1109 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1110 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1111 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1112 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1113 (get_vex_imm8): Likewise.
1114 (OP_EX_VexReg): Likewise.
1115 vpermil2_op): Likewise.
1117 (vex_w_dq_mode): Likewise.
1118 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1119 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1120 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1122 (PREFIX_VEX_38DB): Likewise.
1123 (PREFIX_VEX_3A4A): Likewise.
1124 (PREFIX_VEX_3A60): Likewise.
1125 (PREFIX_VEX_3ADF): Likewise.
1126 (VEX_LEN_3ADF_P_2): Likewise.
1127 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1128 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1129 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1130 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1131 PREFIX_VEX_3896...PREFIX_VEX_389F,
1132 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1133 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1134 (vex_table): Likewise.
1135 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1136 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1137 (putop): Support "%XW".
1138 (intel_operand_size): Handle vex_w_dq_mode.
1140 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1142 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1143 instructions. Add new FMA instructions.
1144 * i386-tbl.h: Regenerated.
1146 2009-01-02 Matthias Klose <doko@ubuntu.com>
1148 * or32-opc.c (or32_print_register, or32_print_immediate,
1149 disassemble_insn): Don't rely on undefined sprintf behaviour.
1151 For older changes see ChangeLog-2008
1157 version-control: never