2 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
4 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
5 PC relative offset forms before the 15 bit forms. An assembler command
6 line option now chooses the default.
10 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
12 * mips-opc.c: Add many missing r5900 instructions.
16 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
18 * d30v-opc.c (d30v_opcode_table): Set new flags bits
19 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
22 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
24 * configure: Only build libopcodes shared if --enable-shared's value
25 was `yes', or was set to `*opcodes*'.
26 * aclocal.m4: Likewise.
27 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
28 original source of this bit of code. It's not clear what the best fix
32 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
34 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
37 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
39 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
40 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
41 offset forms before the 15 bit forms, to default to the long forms.
44 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
46 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
48 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
50 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
51 symbol if none is present.
52 (print_insn_big_arm): Prevent examination of stored symbol if
55 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
57 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
59 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
61 * disassemble.c: Remove disasm_symaddr() function.
63 * arm-dis.c: Use info->symbol instead of info->flags to determine
64 if disassmbly should be in Thumb or Arm mode.
66 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
68 * arm-dis.c: Add support for disassembling Thumb opcodes.
69 (print_insn_thumb): New function.
71 * disassemble.c (disasm_symaddr): New function.
73 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
74 (thumb_opcodes): Table of Thumb opcodes.
76 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
78 * m68k-opc.c (btst): Change Dd@s to Dd;b.
80 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
81 and 'v' as operand types.
83 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
85 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
86 <olivier.carmona@di.epfl.ch>.
87 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
88 which has a two word opcode with a one word argument.
91 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
93 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
95 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
99 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
101 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
102 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
103 (ftrv): Slay the cut-and-paste monster.
106 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
108 * d10v-dis.c (print_operand):
109 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
111 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
113 * d10v-opc.c (OPERAND_FLAG): Split into:
114 (OPERAND_FFLAG, OPERAND_CFLAG) .
118 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
120 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
121 field for all INSN_MACRO's.
124 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
126 * mips-opc.c (sync,cache): These are 3900 insns.
128 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
130 sh-opc.h (sh_table): Remove ftst/nan.
132 start-sanitize-vr5400
133 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
135 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
136 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
138 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
142 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
144 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
145 Add tx49 insns and configury.
148 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
150 * mips-opc.c (ffc, ffs): Fix mask.
153 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
155 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
159 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
161 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
162 start-sanitize-vr5400
163 Added VR5400 instructions.
164 (N5): New cpu-id macro.
166 (WR_HILO, RD_HILO, MOD_HILO): New macros.
168 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
170 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
171 (WR_HILO, RD_HILO, MOD_HILO): New macros.
173 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
175 * v850-dis.c (disassemble): Replace // with /* ... */
177 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
179 * sparc-opc.c: Add wr & rd for v9a asr's.
180 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
181 (v9a_asr_reg_names): New variable.
182 Patch from David Miller <davem@vger.rutgers.edu>.
184 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
186 * sparc-opc.c (v9notv9a): New insn type.
187 (IMPDEP): Move to the end to not conflict with edge8 et al.
188 Patch from David Miller <davem@vger.rutgers.edu>.
190 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
192 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
194 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
196 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
198 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
200 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
201 of disassemble_info structure to determine if an overlay address
202 has a matching symbol in low memory.
204 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
205 new symbol_at_address_func field in disassemble_info structure.
207 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
209 * v850-opc.c (extract_d22): Use signed arithmatic.
211 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
213 * mips-opc.c: Three op mult is not an ISA insn.
215 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
217 * mips-opc.c: Fix formatting.
219 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
221 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
222 than assuming that char is signed. Explicitly sign extend 16 bit
223 values, rather than assuming that short is 16 bits.
224 (OP_sI, OP_J, OP_DIR): Likewise.
227 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
229 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
233 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
235 * v850-opc.c: Fix typo in comment.
237 * v850-dis.c (disassemble): Add test of processor type when
240 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
242 * configure.in: Use a diversion to set enable_shared before the
243 arguments are parsed.
244 * configure: Rebuild.
246 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
248 * m68k-opc.c (TBL1): Use ! rather than `.
249 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
251 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
253 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
255 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
257 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
260 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
261 * aclocal.m4: Rebuild with new libtool.
262 * configure: Rebuild.
265 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
267 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
270 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
272 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
274 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
276 * v850-opc.c (v850_opcodes): Further rearrangements.
279 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
281 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
284 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
286 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
289 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
291 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
293 * mips16-opc.c: Added mips16 sdbbp.
296 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
298 * v850-opc.c: Initialise processors field of v850_opcode structure.
301 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
303 Merge changes from Martin Hunt:
305 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
307 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
308 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
309 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
311 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
313 * d30v-dis.c (print_insn): First operand of d*i (delayed
314 branch) instructions is relative.
316 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
317 (d30v_operand_table): Add IMM6S3 type.
318 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
320 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
321 and cmp instructions.
323 * d30v-opc.c: Correct entries for repeat*, and sat*.
324 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
325 types. Correct several formats.
327 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
329 * d30v-opc.c (pre_defined_registers): Change control registers.
331 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
332 SHORT_C2. Manual was incorrect.
334 * d30v-dis.c (lookup_opcode): Return value now indicates
335 if an opcode has a short and a long form. Used for deciding
336 to append a ".s" or ".l".
337 (print_insn): Append a ".s" to an instruction if it is
338 the short form and ".l" if it is a long form. Do not append
339 anything if the instruction has only one possible size.
341 * d30v-opc.c: Change mulx2h to require an even register.
342 New form: SHORT_A2; a SHORT_A form that needs an even
343 register as the first operand.
345 * d30v-dis.c (print_insn_d30v): Fix problem where the last
346 instruction was not being disassembled if there were an odd
347 number of instructions.
349 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
353 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
355 * v850-dis.c (disassemble): Improved display of register lists.
358 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
360 * sparc-opc.c (sparc_opcodes): Fix assembler args to
361 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
362 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
363 fandnot1s, fandnot2s.
365 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
367 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
369 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
371 * cgen-asm.c (cgen_parse_address): New argument resultp.
373 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
375 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
377 * mn10200-dis.c (disassemble): PC relative instructions are
378 relative to the next instruction, not the current instruction.
380 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
382 * v850-dis.c (disassemble): Only signed extend values that are not
383 returned by extract functions.
384 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
386 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
388 * v850-opc.c: Update comments. Remove use of
389 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
391 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
393 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
395 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
397 * configure: Rebuilt with latest devo autoconf for NT support.
399 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
401 * v850-dis.c (disassemble): Use curly brace syntax for register
404 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
405 where r0 is being used as a destination register.
408 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
410 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
414 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
416 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
417 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
418 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
419 Add insns to access SGR and DBR.
420 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
423 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
425 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
428 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
430 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
431 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
434 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
436 * configure (cgen_files): Add support for v850e target.
437 * configure.in (cgen_files): Add support for v850e target.
439 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
441 * configure (cgen_files): Add support for v850ea target.
442 * configure.in (cgen_files): Add support for v850ea target.
445 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
447 * configure.in (bfd_arc_arch): Add.
448 * configure: Rebuild.
449 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
450 * Makefile.in: Rebuild.
451 * arc-dis.c, arc-opc.c: New files.
452 * disassemble.c (ARCH_all): Define ARCH_arc.
453 (disassembler): Add ARC support.
455 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
458 * v850-dis.c (disassemble): Add support for v850EA instructions.
460 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
461 (v850_opcodes): Add v850EA instructions.
463 * v850-dis.c (disassemble): Add support for v850E instructions.
465 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
466 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
467 insert_spe, extract_spe): New Functions.
468 (v850_opcodes): Add v850E instructions.
471 * v850-opc.c: Reorganised and re-layed out to improve readability
474 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
476 * configure: Rebuild with autoconf 2.12.1.
478 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
480 * aclocal.m4, configure: Rebuild with new automake patches.
482 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
484 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
485 * acinclude.m4: Just include acinclude.m4 from BFD.
486 * aclocal.m4, configure: Rebuild.
488 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
490 * Makefile.am: New file, based on old Makefile.in.
491 * acconfig.h: New file.
492 * acinclude.m4: New file.
493 * stamp-h.in: New file.
494 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
495 Removed shared library handling; now handled by libtool. Replace
496 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
497 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
498 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
499 handling in AC_OUTPUT.
500 * dep-in.sed: Change .o to .lo.
501 * Makefile.in: Now built with automake.
502 * aclocal.m4: Now built with aclocal.
503 * config.in, configure: Rebuild.
505 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
507 * mips-opc.c: Fix typo/thinko in "eret" instruction.
510 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
512 * mips-opc.c: Fix coding of mtsa.
515 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
517 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
519 * sparc-dis.c (sorted_opcodes): New static local.
520 (struct opcode_hash): `opcode' is pointer to const element.
521 (build_hash): First arg is now table of sorted pointers.
522 (print_insn_sparc): Sort opcodes by sorting table of pointers.
523 (compare_opcodes): Update.
525 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
527 * cgen-opc.c: #include <ctype.h>.
528 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
529 Handle case insensitive hashing.
530 (hash_keyword_value): Change type of `value' to unsigned int.
532 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
534 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
535 precision FP, mark it as such. Likewise for double precision
536 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
539 (mips_builtin_opcodes): Remove non-existant r5900 instructions
543 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
545 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
546 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
549 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
551 * ppc-opc.c (extract_nsi): make unsigned expression signed before
553 (UNUSED): remove one level of parens, so MSVC doesn't choke on
554 nesting depth when all the macros are expanded.
556 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
558 * sparc-opc.c: The fcmp v9a instructions take an integer register
559 as a destination, not a floating point register. From Christian
560 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
562 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
564 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
565 syntax. From Roman Hodek
566 <rnhodek@faui22c.informatik.uni-erlangen.de>.
568 * i386-dis.c (twobyte_has_modrm): Fix pand.
570 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
572 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
574 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
576 * arm-dis.c: Add prototypes for arm_decode_shift and
579 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
581 * mips-opc.c: Add r3900 insns.
583 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
585 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
586 print delay slot instructions on the same line. When using a PC
587 relative load, add a comment with the value being loaded if it can
590 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
592 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
593 to pushS/popS for segment regs and byte constant so that
594 pushw/popw printed when in 16 bit data mode.
596 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
597 print cbtw, cwtd in 16 bit data mode.
598 * i386-dis.c (putop): extra case W to support above.
600 * i386-dis.c (print_insn_x86): print addr32 prefix when given
601 address size prefix in 16 bit address mode.
603 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
605 * sh-dis.c: Reindent. Rename local variable fprintf to
608 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
610 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
612 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
614 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
616 * mips16-opc.c (mip16_opcodes): same.
618 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
620 * m68k-opc.c (moveb): Change $d to %d.
622 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
624 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
625 (twobyte_has_modrm): Likewise.
627 (OP_MMX, OP_EM, OP_MS): New static functions.
629 * i386-dis.c: Revert patch of April 4. The output now matches
632 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
634 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
637 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
639 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
641 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
643 * Makefile.in (install): Depend upon installdirs.
644 (installdirs): New target.
646 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
648 From Thomas Graichen <graichen@rzpd.de>:
649 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
650 * configure: Rebuild.
652 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
654 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
655 Delete string{,s}.h support.
657 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
659 * cgen-asm.c (cgen_parse_operand_fn): New global.
660 (cgen_parse_{{,un}signed_integer,address}): Update call to
661 cgen_parse_operand_fn.
662 (cgen_init_parse_operand): New function.
663 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
664 from cgen_asm_init_parse.
665 (m32r_cgen_assemble_insn): New operand `errmsg'.
666 Delete call to as_bad, return error message to caller.
667 (m32r_cgen_asm_hash_keywords): #if 0 out.
669 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
671 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
673 [case 'J']: Fix typo in register name.
675 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
677 * configure.in: Substitute SHLIB_LIBS.
678 * configure: Rebuild.
679 * Makefile.in (SHLIB_LIBS): New variable.
680 ($(SHLIB)): Use $(SHLIB_LIBS).
682 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
684 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
686 * cgen-opc.c (hash_keyword_name): Improve algorithm.
688 * disassemble.c (disassembler): Handle m32r.
690 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
692 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
693 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
694 * Makefile.in (CFILES): Add them.
695 (ALL_MACHINES): Add them.
696 (dependencies): Regenerate.
697 * configure.in (cgen_files): New variable.
698 (bfd_m32r_arch): Add entry.
699 * configure: Regenerate.
701 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
703 * configure.in: Correct file names for bfd_mn10[23]00_arch.
704 * configure: Rebuild.
706 * Makefile.in: Rebuild dependencies.
708 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
710 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
713 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
715 * Branched binutils 2.8.
717 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
719 * m10200-dis.c: Rename from mn10200-dis.c.
720 * m10200-opc.c: Rename from mn10200-opc.c.
721 * m10300-dis.c: Rename from mn10300-dis.c
722 * m10300-opc.c: Rename from mn10300-opc.c.
723 * Makefile.in: Update accordingly.
725 * mips16-opc.c: Add mul and dmul macros.
727 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
729 * makefile.vms: Update CFLAGS, add clean target.
731 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
733 * mips-opc.c: Add "wait". From Ralf Baechle
734 <ralf@gnu.ai.mit.edu>.
736 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
737 * configure, config.in: Rebuild.
738 * sysdep.h: Include <stdlib.h> if it exists.
739 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
741 * Makefile.in: Rebuild dependencies.
743 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
745 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
746 Andrew Bray <andy@madhouse.demon.co.uk>.
748 * mips-opc.c: Add cast when setting mips_opcodes.
750 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
752 * v850-dis.c (disassemble): Fix sign extension problem.
753 * v850-opc.c (extract_d*): Fix sign extension problems to make
754 disassembly calculate branch offsets correctly.
756 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
758 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
760 * mips-opc.c: Add dctr and dctw.
763 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
765 * d30v-dis.c (print_insn): Change the way signed constants
768 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
770 * Makefile.in (BFD_H): New variable.
771 (HFILES): New variable.
772 (CFILES): Add all C files.
773 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
774 Delete old dependencies, and build new ones.
775 * dep-in.sed: New file.
777 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
779 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
781 start-sanitize-coldfire
782 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
784 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
787 end-sanitize-coldfire
788 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
790 * mn10200-opc.c: Change "trap" to "syscall".
791 * mn10300-opc.c: Add new "syscall" instruction.
793 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
795 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
796 mulul insns on the coldfire.
798 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
800 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
801 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
802 (print_insn_little_arm): Likewise.
804 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
806 Based on patches from H.J. Lu <hjl@lucon.org>:
807 * i386-dis.c (fetch_data): Add prototype.
808 * m68k-dis.c (fetch_data): Add prototype.
809 (dummy_print_address): Add prototype. Make static.
810 * ppc-opc.c (valid_bo): Add prototype.
811 * sparc-dis.c (build_hash_table): Add prototype.
812 (is_delayed_branch, compute_arch_mask): Add prototypes.
813 (print_insn_sparc): Make several local variables const.
814 (compare_opcodes): Change arguments to const PTR. Add prototype.
815 * sparc-opc.c (arg): Change name field to be const.
816 (lookup_name, lookup_value): Add prototypes. Change table and
817 name parameters to be const.
818 (sparc_encode_asi): Change name parameter to be const.
819 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
820 (sparc_encode_sparclet_cpreg): Likewise.
821 (sparc_decode_asi): Change return type to be const.
822 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
823 (sparc_decode_sparclet_cpreg): Likewise.
825 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
827 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
828 Solaris doesn't like the combined options, and the -f is
830 (stamp-tshlink, install): Likewise.
832 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
834 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
837 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
839 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
841 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
843 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
846 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
848 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
851 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
853 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
855 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
857 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
860 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
862 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
863 floatformat_to_double to make portable.
864 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
867 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
869 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
870 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
872 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
874 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
875 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
878 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
880 * tic80-opc.c (LSI_SCALED): Renamed from this ...
881 (OFF_SL_BR_SCALED): ... to this, and added the flag
882 TIC80_OPERAND_BASEREL to the flags word.
883 (tic80_opcodes): Replace all occurances of LSI_SCALED with
887 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
889 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
890 Change mips_opcodes from const array to a pointer,
891 and change bfd_mips_num_opcodes from const int to int,
892 so that we can increase the size of the mips opcodes table
896 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
898 * tic80-opc.c (tic80_predefined_symbols): Revert change to
899 store BITNUM values in the table in one's complement form
900 to match behavior when assembler is given a raw numeric
901 value for a BITNUM operand.
902 * tic80-dis.c (print_operand_bitnum): Ditto.
906 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
908 * d30v-opc.c: Removed references to FLAG_X.
911 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
913 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
916 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
918 * Makefile.in: Added d30v object files.
919 * configure: (bfd_d30v_arch) Rebuilt.
920 * configure.in: (bfd_d30v_arch) Added new case.
921 * d30v-dis.c: New file.
922 * d30v-opc.c: New file.
923 * disassemble.c (disassembler) Add entry for d30v.
927 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
929 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
930 representations for the floating point BITNUM values.
932 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
934 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
935 in the table in one's complement form, as they appear in the
937 (tic80_symbol_to_value): Use macros to access predefined
939 (tic80_value_to_symbol): Ditto.
940 (tic80_next_predefined_symbol): New function.
941 * tic80-dis.c (print_operand_bitnum): Remove code that did
942 one's complement for BITNUM values.
946 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
948 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
951 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
953 * makefile.vms: Remove 8 bit characters. Update to latest
956 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
958 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
960 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
962 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
963 (IMM24_PCREL): Likewise.
965 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
967 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
968 address for an extended PC relative instruction that is not a
971 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
973 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
977 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
979 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
980 (tic80_opcodes): Sort entries so that long immediate forms
981 come after short immediate forms, making it easier for
982 assembler to select the right one for a given operand.
985 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
987 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
989 (print_insn_mips16): Likewise.
992 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
994 * mips-opc.c: add r5900.
998 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1000 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1001 a symbol class that restricts translation to just that
1002 class (general register, condition code, etc).
1004 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1006 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1007 and REG_DEST_E for register operands that have to be
1008 an even numbered register. Add REG_FPA for operands that
1009 are one of the floating point accumulator registers.
1010 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1011 (tic80_opcodes): Change entries that need even numbered
1012 register operands to use the new operand table entries.
1013 Add "or" entries that are identical to "or.tt" entries.
1016 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1018 * mips16-opc.c: Add new cases of exit instruction for
1020 * mips-dis.c (print_mips16_insn_arg): Display floating point
1021 registers in operands of exit instruction. Print `$' before
1022 register names in operands of entry and exit instructions.
1024 start-sanitize-tic80
1025 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1027 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1028 pairs for all predefined symbols recognized by the assembler.
1029 Also used by the disassembling routines.
1030 (tic80_symbol_to_value): New function.
1031 (tic80_value_to_symbol): New function.
1032 * tic80-dis.c (print_operand_control_register,
1033 print_operand_condition_code, print_operand_bitnum):
1034 Remove private tables and use tic80_value_to_symbol function.
1037 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1039 * d10v-dis.c (print_operand): Change address printing
1040 to correctly handle PC wrapping. Fixes PR11490.
1042 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1044 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1047 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1049 * mips-dis.c (print_insn_mips16): Set insn_info information.
1050 (print_mips16_insn_arg): Likewise.
1052 * mips-dis.c (print_insn_mips16): Better handling of an extend
1053 opcode followed by an instruction which can not be extended.
1055 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1057 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1058 coldfire moveb instruction to not allow an address register as
1059 destination. Although the documentation does not indicate that
1060 this is invalid, experiments uncovered unexpected behavior.
1061 Added a comment explaining the situation. Thanks to Andreas
1062 Schwab for pointing this out to me.
1064 start-sanitize-tic80
1065 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1067 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1068 entries are presorted so that entries with the same mnemonic are
1069 adjacent to each other in the table. Sort the entries for each
1070 instruction so that this is true.
1073 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1075 * m68k-dis.c: Include <libiberty.h>.
1076 (print_insn_m68k): Sort the opcode table on the most significant
1077 nibble of the opcode.
1079 start-sanitize-tic80
1080 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1082 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1083 "vsub", "vst", "xnor", and "xor" instructions.
1084 (V_a1): Renamed from V_a, msb of accumulator reg number.
1085 (V_a0): Add macro, lsb of accumulator reg number.
1087 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1089 * tic80-dis.c (print_insn_tic80): Broke excessively long
1090 function up into several smaller ones and arranged for
1091 the instruction printing function to be callable recursively
1092 to print vector instructions that have both a load and a
1093 math instruction packed into a single opcode.
1094 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1095 to explain why it comes after the other vector opcodes.
1098 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1100 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1101 move insns to handle immediate operands.
1103 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1105 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1106 fix operand mask in the "moveml" entries for the coldfire.
1108 start-sanitize-tic80
1109 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1111 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1112 New macros for building vector instruction opcodes.
1113 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1114 FMT_LI, which were unused. The field is now a flags field.
1115 Remove some opcodes that are possible, but illegal, such
1116 as long immediate instructions with doubles for immediate
1117 values. Add "vadd" and "vld" instructions.
1119 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1121 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1122 the order more logical. Move the shift alias instructions ("rotl",
1123 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1124 interspersed with the regular sr.x and sl.x instructions. Add
1125 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1126 "sub", "subu", "swcr", and "trap".
1128 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1130 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1131 (OFF_SL_PC): Renamed from OFF_SL.
1132 (OFF_SS_BR): New operand type for base relative operand.
1133 (OFF_SL_BR): New operand type for base relative operand.
1134 (REG_BASE): New operand type for base register operand.
1135 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1136 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1137 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1139 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1140 10 char field, padded with spaces on rhs, rather than a string
1141 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1142 than old TIC80_OPERAND_RELATIVE. Add support for new
1143 TIC80_OPERAND_BASEREL flag bit.
1145 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1147 * tic80-dis.c (print_insn_tic80): Print floating point operands
1149 * tic80-opc.c (SPFI): Add single precision floating point
1150 immediate operand type.
1151 (ROTATE): Add rotate operand type for shifts.
1152 (ENDMASK): Add for shifts.
1153 (n): Macro for the 'n' bit.
1154 (i): Macro for the 'i' bit.
1155 (PD): Macro for the 'PD' field.
1156 (P2): Macro for the 'P2' field.
1157 (P1): Macro for the 'P1' field.
1158 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1162 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1164 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1165 adding in current address for pc-relative operands.
1167 start-sanitize-tic80
1168 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1170 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1171 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1172 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1173 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1174 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1175 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1176 (REG_SCALED, LSI_SCALED): New operand types.
1177 (E): New macro for 'E' bit at bit 27.
1178 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1179 opcodes, including the various size flavors (b,h,w,d) for
1180 the direct load and store instructions.
1182 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1184 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1186 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1187 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1188 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1189 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1190 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1191 masks with "MASK_* & ~M_*" to get the M bit reset.
1192 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1194 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1196 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1197 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1198 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1200 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1201 CC, SICR, and LICR table entries.
1202 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1203 "bcnd", and "brcr" opcodes.
1206 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1208 * ppc-opc.c (powerpc_operands): Make comment match the
1209 actual fields (no shift field).
1210 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1211 start-sanitize-tic80
1212 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1213 partial implementation, work in progress.
1214 * tic80-opc.c (tic80_operands): Begin construction operands table.
1215 (tic80_opcodes): Continue populating opcodes table and start
1216 filling in the operand indices.
1217 (tic80_num_opcodes): Add this.
1220 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1222 * m68k-opc.c: Add #B case for moveq.
1224 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1226 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1227 before they are used.
1229 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1231 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1232 for "breakpoint" instruction.
1234 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1236 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1237 (dep): Use ALL_CFLAGS rather than CFLAGS.
1239 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1241 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1244 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1246 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1247 start-sanitize-tic80
1248 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1251 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1253 * mips16-opc.c: Add "abs".
1255 start-sanitize-tic80
1256 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1258 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1259 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1260 (disassembler): Add bfd_arch_tic80 support to set disassemble
1261 to print_insn_tic80.
1262 * tic80-dis.c (print_insn_tic80): Add stub.
1264 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1266 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1267 * configure: Regenerate with autoconf.
1268 * tic80-dis.c: Add file.
1269 * tic80-opc.c: Add file.
1272 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1274 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1276 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1278 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1279 (mn10200_opcodes): Use it for some logicals and btst insns.
1280 Add "break" and "trap" instructions.
1282 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1284 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1286 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1288 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1289 relative load or add now depends upon whether the instruction is
1292 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1294 * mn10200-dis.c: Finish writing disassembler.
1295 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1296 Fix mask for "jmp (an)".
1298 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1299 handle endianness issues for mn10300.
1301 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1303 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1305 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1306 instruction. Fix opcode field for "movb (imm24),dn".
1308 * mn10200-opc.c (mn10200_operands): Fix insertion position
1311 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1313 * mn10200-opc.c: Create mn10200 opcode table.
1314 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1315 but moving along nicely.
1317 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1319 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1321 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1323 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1324 specifiers for fmovem* instructions.
1326 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1328 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1330 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1332 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1335 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1337 * mn10300-opc.c: Add some comments explaining the various
1340 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1342 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1344 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1347 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1348 operand specifiers in fmovm* instructions.
1350 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1352 * ppc-opc.c (insert_li): Give an error if the offset has the two
1353 least significant bits set.
1355 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1357 * mips-dis.c (print_insn_mips16): Separate the instruction from
1358 the arguments with a tab, not a space.
1360 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1362 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1365 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1368 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1370 * configure: Rebuild with autoconf 2.12.
1372 Add support for mips16 (16 bit MIPS implementation):
1373 * mips16-opc.c: New file.
1374 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1375 (mips16_reg_names): New static array.
1376 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1377 after seeing a 16 bit symbol.
1378 (print_insn_little_mips): Likewise.
1379 (print_insn_mips16): New static function.
1380 (print_mips16_insn_arg): New static function.
1381 * mips-opc.c: Add jalx instruction.
1382 * Makefile.in (mips16-opc.o): New target.
1383 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1384 * configure: Rebuild.
1386 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1388 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1389 operand specifiers in *save, *restore and movem* instructions.
1391 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1394 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1395 register operands for immediate arithmetic, not, neg, negx, and
1396 set according to condition instructions.
1398 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1399 specifier of the effective-address operand in immediate forms of
1400 arithmetic instructions. The specifier for the immediate operand
1401 notes how and where the constant will be stored.
1403 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1405 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1408 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1411 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1413 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1415 * mn10300-dis.c (disassemble): Handle register lists.
1417 * mn10300-opc.c: Fix handling of register list operand for
1418 "call", "ret", and "rets" instructions.
1420 * mn10300-dis.c (disassemble): Print PC-relative and memory
1421 addresses symbolically if possible.
1422 * mn10300-opc.c: Distinguish between absolute memory addresses,
1423 pc-relative offsets & random immediates.
1425 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1427 (disassemble): Handle SPLIT and EXTENDED operands.
1429 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1431 * mn10300-dis.c: Rough cut at printing some operands.
1433 * mn10300-dis.c: Start working on disassembler support.
1434 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1436 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1438 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1440 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1442 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1444 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1446 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1447 register argument is calls and jmp instructions.
1449 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1451 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1452 getx operand. Fix opcode for mulqu imm,dn.
1454 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1456 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1457 in MN10300_OPERAND_SPLIT operands for how many bits
1458 appear in the basic insn word. Add IMM32_HIGH24,
1459 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1460 (mn10300_opcodes): Use new operands as needed.
1462 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1463 for bset, bclr, btst instructions.
1464 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1466 * mn10300-opc.c (mn10300_operands): Remove many redundant
1467 operands. Update opcode table as appropriate.
1468 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1469 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1471 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1473 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1474 operands (for indexed load/stores). Fix bitpos for DI
1475 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1476 few instructions that insert immediates/displacements in the
1477 middle of the instruction. Add IMM8E for 8 bit immediate in
1478 the extended part of an instruction.
1479 (mn10300_operands): Use new opcodes as appropriate.
1481 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1483 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1484 sequential so the assembler never parallelizes it with
1487 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1489 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1490 a data/address register that appears in register field 0
1491 and register field 1.
1492 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1494 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1496 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1497 standard disassembly.
1499 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1500 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1501 Recategorize PALcode instructions.
1503 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1505 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1507 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1509 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1510 there are no operand types.
1512 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1514 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1516 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1518 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1520 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1522 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1524 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1525 and sst.w instructions.
1527 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1530 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1532 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1535 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1537 * ppc-opc.c (PPCPWR2): Define.
1538 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1541 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1543 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1544 field for movhu instruction.
1546 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1547 cast value to "long" not "signed long" to keep hpux10
1550 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1552 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1555 * mn10300-opc.c (FMT*): Remove definitions.
1557 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1558 for shift-by-register opcodes.
1560 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1561 into [AD][MN][01] for encoding the position of the register
1564 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1566 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1567 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1569 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1571 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1572 Fix various typos. Add "PAREN" operand.
1573 (MEM, MEM2): Define.
1574 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1575 operands. Fix several typos.
1577 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1580 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1582 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1583 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1585 (mn10300_opcodes): Break opcode format out into its own field.
1586 Update many operand fields to deal with signed vs unsigned
1587 issues. Fix one or two typos in the "mov" instruction
1588 opcode, mask and/or operand fields.
1590 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1592 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1593 m68851 wasn't reset.
1595 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1597 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1598 all opcodes. Very rough cut at operands for all opcodes.
1600 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1603 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1605 * mn10200-opc.c, mn10300-opc.c: New files.
1606 * mn10200-dis.c, mn10300-dis.c: New files.
1607 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1608 * disassemble.c: Break mn10x00 support into 10200 and 10300
1610 * configure.in: Likewise.
1611 * configure: Rebuilt.
1613 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1615 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1617 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1619 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1621 * disassemble (ARCH_mn10x00): Define.
1622 (disassembler): Handle bfd_arch_mn10x00.
1623 * configure.in: Recognize bfd_mn10x00_arch.
1624 * configure: Rebuilt.
1626 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1628 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1629 accordingly. Don't declare functions using op_rtn.
1631 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1633 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1634 params to be more standard.
1635 * (disassemble): Print absolute addresses and symbolic names for
1636 branch and jump targets.
1637 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1639 * (v850_opcodes): Add breakpoint insn.
1641 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1643 * m68k-opc.c: Move the fmovemx data register cases before the
1644 other cases, so that they get recognized before the data register
1645 does gets treated as a degenerate register list.
1647 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1649 * mips-opc.c: Add a case for "div" and "divu" with two registers
1650 and a destination of $0.
1652 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1654 * mips-dis.c (print_insn_arg): Add prototype.
1655 (_print_insn_mips): Ditto.
1657 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1659 * mips-dis.c (print_insn_arg): Print condition code registers as
1662 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1664 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1666 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1668 * v850-dis.c (disassemble): Make static. Provide prototype.
1670 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1672 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1675 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1677 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1678 ']' characters into the output stream.
1679 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1680 Add "memop" field to all opcodes (for the disassembler).
1681 Reorder opcodes so that "nop" comes before "mov" and "jr"
1682 comes before "jarl".
1684 * v850-dis.c (print_insn_v850): Fix typo in last change.
1686 * v850-dis.c (print_insn_v850): Properly handle disassembling
1687 a two byte insn at the end of a memory region when the memory
1688 region's size is only two byte aligned.
1690 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1692 * v850-dis.c (v850_reg_names): Define.
1693 (v850_sreg_names, v850_cc_names): Likewise.
1694 (disassemble): Very rough cut at printing operands (unformatted).
1696 * v850-opc.c (BOP_MASK): Fix.
1697 (v850_opcodes): Fix mask for jarl and jr.
1699 * v850-dis.c: New file. Skeleton for disassembler support.
1700 * Makefile.in Remove v850 references, they're not needed here.
1701 * configure.in: Add v850-dis.o when building v850 toolchains.
1702 * configure: Rebuilt.
1703 * disassemble.c (disassembler): Call v850 disassembler.
1705 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1706 (insert_d8_6, extract_d8_6): New functions.
1707 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1708 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1710 (IF4A, IF4B): Use "D7" instead of "D7S".
1711 (IF4C, IF4D): Use "D8_7" instead of "D8".
1712 (IF4E, IF4F): New. Use "D8_6".
1713 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1714 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1716 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1717 (v850_operands): Change D16 to D16_15, use special insert/extract
1718 routines. New new D16 that uses the generic insert/extract code.
1719 (IF7A, IF7B): Use D16_15.
1720 (IF7C, IF7D): New. Use D16.
1721 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1723 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1724 message. Issue an error if the branch offset is odd.
1726 * v850-opc.c: Add notes about needing special insert/extract
1727 for all the load/store insns, except "ld.b" and "st.b".
1729 * v850-opc.c (insert_d22, extract_d22): New functions.
1730 (v850_operands): Use insert_d22 and extract_d22 for
1732 (insert_d9): Fix range check.
1734 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1736 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1737 and set bits field to D9 and D22 operands.
1739 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1741 * v850-opc.c (v850_operands): Define SR2 operand.
1742 (v850_opcodes): "ldsr" uses R1,SR2.
1744 * v850-opc.c (v850_opcodes): Fix opcode specs for
1745 sld.w, sst.b, sst.h, sst.w, and nop.
1747 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1749 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1750 end of the opcode table.
1752 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1754 * d10v-opc.c (pre_defined_registers): Added register pairs,
1755 "r0-r1", "r2-r3", etc.
1757 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1759 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1760 Create I16U for an unsigned 16bit mmediate operand.
1761 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1763 * v850-opc.c (v850_operands): Define EP operand.
1764 (IF4A, IF4B, IF4C, IF4D): Use EP.
1766 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1767 with immediate operand, "movhi". Tweak "ldsr".
1769 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1770 correct. Get sld.[bhw] and sst.[bhw] closer.
1772 * v850-opc.c (v850_operands): "not" is a two byte insn
1774 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1776 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1778 * v850-opc.c (two): Get order of words correct.
1780 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1782 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1783 register source and destination operands.
1784 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1786 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1787 same thinko in "trap" opcode.
1789 * v850-opc.c (v850_opcodes): Add initializer for size field
1792 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1793 Add D8 for 8-bit unsigned field in short load/store insns.
1794 (IF4A, IF4D): These both need two registers.
1795 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1796 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1797 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1798 for "ldsr" and "stsr".
1799 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1802 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1803 short store word (sst.w).
1805 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1807 * v850-opc.c (v850_operands): Added insert and extract fields,
1808 pointers to functions that handle unusual operand encodings.
1810 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1812 * v850-opc.c (v850_opcodes): Enable "trap".
1814 * v850-opc.c (v850_opcodes): Fix order of displacement
1815 and register for "set1", "clr1", "not1", and "tst1".
1817 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1819 * v850-opc.c (v850_operands): Add "B3" support.
1820 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1823 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1825 * v850-opc.c: Close unterminated comment.
1827 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1829 * v850-opc.c (v850_operands): Add flags field.
1830 (v850_opcodes): add move opcodes.
1832 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1834 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1835 * configure: (bfd_v850v_arch) Add new case.
1836 * configure.in: (bfd_v850_arch) Add new case.
1837 * v850-opc.c: New file.
1839 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1841 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1843 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1845 * d10v-opc.c: Add additional information to the opcode
1846 table to help determinine which instructions can be done
1849 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1851 * mpw-make.sed: Update editing of include pathnames to be
1854 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1856 * arm-opc.h: Added "bx" instruction definition.
1858 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1860 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1862 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1864 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1866 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1868 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1870 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1872 * makefile.vms: Update for alpha-opc changes.
1874 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1876 * i386-dis.c (print_insn_i386): Actually return the correct value.
1877 (ONE, OP_ONE): #ifdef out; not used.
1879 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1881 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1882 Changed subi operand type to treat 0 as 16.
1884 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1886 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1889 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1891 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1892 memory transfer instructions. Add new format string entries %h and %s.
1893 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1896 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1898 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1899 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1901 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1903 * alpha-dis.c (print_insn_alpha_osf): Remove.
1904 (print_insn_alpha_vms): Remove.
1905 (print_insn_alpha): Make globally visible. Chose the register
1906 names based on info->flavour.
1907 * disassemble.c: Always return print_insn_alpha for the alpha.
1909 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1911 * d10v-dis.c (dis_long): Handle unknown opcodes.
1913 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1915 * d10v-opc.c: Changes to support signed and unsigned numbers.
1916 All instructions with the same name that have long and short forms
1917 now end in ".l" or ".s". Divs added.
1918 * d10v-dis.c: Changes to support signed and unsigned numbers.
1920 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1922 * d10v-dis.c: Change all functions to use info->print_address_func.
1924 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1926 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1927 move ccr/sr insns more strict so that the disassembler only
1928 selects them when the addressing mode is data register.
1930 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1931 * d10v-opc.c (pre_defined_registers): Declare.
1932 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1933 to pick a better name for the registers.
1935 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1937 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1938 operands for fexpand and fpmerge. From Christian Kuehnke
1939 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1941 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1943 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1944 print routine. Take new regnames and cpumask arguments.
1945 Kill the environment variable nonsense.
1946 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1947 (print_insn_alpha_vms): New function. Do VMS style regnames.
1948 * disassemble.c (disassembler): Test bfd flavour to pick
1949 between OSF and VMS routines. Default to OSF.
1951 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1953 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1954 * configure: Rebuild.
1955 * Makefile.in (install): Use @INSTALL_SHLIB@.
1957 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1959 * configure: (bfd_d10v_arch) Add new case.
1960 * configure.in: (bfd_d10v_arch) Add new case.
1961 * d10v-dis.c: New file.
1962 * d10v-opc.c: New file.
1963 * disassemble.c (disassembler) Add entry for d10v.
1965 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1967 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1968 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1970 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1972 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1973 distinguish between variants of the instruction set.
1974 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1975 distinguish between variants of the instruction set.
1977 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1979 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1980 the 8086 instruction set.
1981 * i386-dis.c: General cleanups. Make most things static. Add
1982 prototypes. Get rid of static variables aflags and dflags. Pass
1983 them as args (to almost everything).
1985 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1987 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1989 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1991 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1992 if the next arg is marked with SRC_IN_DST. Gross.
1994 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1995 we're looking for and find EXR.
1997 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1998 if we're looking for KBIT and we don't find it.
2000 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2003 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2004 3bit immediate operands.
2006 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2008 * Released binutils 2.7.
2010 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2011 <kkaempf@progis.ac-net.de>.
2013 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2015 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2017 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2019 * sparc-dis.c (print_insn_sparclite): New routine to print
2020 sparclite instructions.
2022 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2024 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2026 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2028 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2029 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2030 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2032 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2034 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2035 Use autoconf-set values.
2036 (docdir, oldincludedir): Removed.
2037 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2039 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2041 * alpha-opc.c: New file.
2042 * alpha-opc.h: Remove.
2043 * alpha-dis.c: Complete rewrite to use new opcode table.
2044 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2045 * configure: Rebuild with autoconf 2.10.
2046 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2047 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2049 (alpha-opc.o): New target.
2051 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2053 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2054 Set imm_added_to_rs1 even if the source and destination register
2057 * sparc-opc.c: Add some two operand forms of the wr instruction.
2059 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2061 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2064 * disassemble.c (disassembler): Handle H8/S.
2065 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2067 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2069 * sparc-opc.c: Add beq/teq as aliases for be/te.
2071 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2072 <sergei@msil.sps.mot.com>.
2074 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2076 * makefile.vms: New file.
2078 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2080 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2082 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2085 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2087 * i386-dis.c (OP_OFF): Call append_prefix.
2089 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2091 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2092 unsigned long to silence a warning from the Solaris PowerPC
2095 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2097 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2099 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2101 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2103 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2104 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2105 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2106 cpush, cpusha, cpull sparclet insns.
2108 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2110 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2112 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2114 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2115 Set F_FLOAT on other floating point instructions.
2117 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2119 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2121 (powerpc_opcodes): Add 860/821 specific SPRs.
2123 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2125 * configure.in: Permit --enable-shared to specify a list of
2126 directories. Set and substitute BFD_PICLIST.
2127 * configure: Rebuild.
2128 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2129 uses. Set to @BFD_PICLIST@.
2131 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2133 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2134 not "abs", which may be needed for the absolute in something
2135 like btst #0,@10:8. Print L_3 immediates separately from other
2136 immediates. Change ABSMOV reference to ABS8MEM.
2138 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2140 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2141 (current_arch_mask): New static global.
2142 (compute_arch_mask): New static function.
2143 (print_insn_sparc): Delete sparc_v9_p. New static local
2144 current_mach. Resort opcode table if current_mach changes.
2145 Generalize "insn not supported" test.
2146 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2147 Delete test for v9/!v9.
2148 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2150 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2151 (brfcx): Renamed to FBRX.
2152 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2153 coprocessor mnemonics are not supported on the sparclet).
2154 (condf): Renamed to CONDF.
2155 (SLCBCC2): Delete F_ALIAS flag.
2157 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2159 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2160 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2162 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2164 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2165 that the shared library version number is set correctly.
2167 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2169 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2170 Miles Bader <miles@gnu.ai.mit.edu>.
2171 * configure: Rebuild.
2173 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2175 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2178 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2180 * configure: Rebuild with autoconf 2.8.
2182 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2184 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2185 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2187 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2189 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2190 since they appear as targets in Makefile.in.
2191 * configure: Rebuild.
2193 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2195 * mpw-make.sed: Edit out shared library support bits.
2197 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2199 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2200 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2201 (sparc_opcodes): Add sparclet insns.
2202 (sparclet_cpreg_table): New static local.
2203 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2204 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2206 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2208 * i386-dis.c (index16): New static variable.
2209 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2211 (OP_indirE): Return result of OP_E.
2212 (OP_E): Check for 16 bit addressing mode, and disassemble
2213 correctly. Optimised 32 bit case a little. Don't print
2214 "(base,index,scale)" when sib specifies only an offset.
2216 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2218 * configure.in: Set and substitute SHLIB_DEP.
2219 * configure: Rebuild.
2220 * Makefile.in (SHLIB_DEP): New variable.
2221 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2222 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2223 COMMON_SHLIB, add them to piclist with appropriate modifications.
2224 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2225 here: just use piclist.
2227 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2229 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2230 (print_insn_sparc): Rewrite v9/not-v9 tests.
2231 (compare_opcodes): Likewise.
2232 * sparc-opc.c (MASK_<ARCH>): Define.
2233 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2234 (sparclet,v6notv9): Define.
2235 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2236 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2238 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2240 * configure.in: Call AC_PROG_CC before configure.host.
2241 * configure: Rebuild.
2243 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2245 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2247 * i386-dis.c (onebyte_has_modrm): New static array.
2248 (twobyte_has_modrm): New static array.
2249 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2251 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2253 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2256 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2258 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2261 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2263 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2264 m68010up, not just m68020up | cpu32.
2266 * Makefile.in (SONAME): New variable.
2267 ($(SHLINK)): Make a link to the transformed name, as well.
2268 (stamp-tshlink): New target.
2269 (install): Skip stamp-tshlink during install.
2271 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2273 * configure.in: Call AC_ARG_PROGRAM.
2274 * configure: Rebuild.
2275 * Makefile.in (program_transform_name): New variable.
2276 (install): Transform library name before installing it.
2278 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2280 * i960-dis.c (mem): Add HX dcinva instruction.
2282 Support for building as a shared library, based on patches from
2283 Alan Modra <alan@spri.levels.unisa.edu.au>:
2284 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2285 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2286 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2287 * configure: Rebuild.
2288 * Makefile.in (ALLLIBS): New variable.
2289 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2290 (COMMON_SHLIB, SHLINK): New variables.
2291 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2292 (STAGESTUFF): Remove variable.
2293 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2294 (stamp-piclist, piclist): New targets.
2295 ($(SHLIB), $(SHLINK)): New targets.
2296 ($(OFILES)): Depend upon stamp-picdir.
2297 (disassemble.o): Build twice if PICFLAG is set.
2298 (MOSTLYCLEAN): Add pic/*.o.
2299 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2300 (distclean): Remove pic and stamp-picdir.
2301 (install): Install shared libraries.
2302 (stamp-picdir): New target.
2304 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2306 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2307 Print unknown instruction as "unknown", rather than in hex.
2309 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2311 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2313 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2315 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2317 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2319 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2320 when necessary. From Ulrich Drepper
2321 <drepper@myware.rz.uni-karlsruhe.de>.
2323 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2325 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2326 sparc_num_opcodes. Update architecture enum values.
2327 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2328 (sparc_opcode_lookup_arch): New function.
2329 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2330 (sparc_opcodes): Add v9a shutdown insn.
2332 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2334 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2335 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2337 (print_insn_sparc64): Deleted.
2338 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2341 * sparc-opc.c (architecture_pname): Add v9a.
2343 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2345 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2346 incorrectly defined as 0x16 when it should be 0x15.
2347 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2348 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2349 excb (exception barrier) which is defined in the Alpha
2350 Architecture Handbook version 2.
2351 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2352 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2353 disassembled as or, for example.
2355 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2357 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2358 (_print_insn_mips): Change i from int to unsigned int.
2360 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2362 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2363 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2365 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2367 * i386-dis.c: Added Pentium Pro instructions.
2369 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2371 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2374 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2376 * sh-opc.h (sh_nibble_type): Added REG_B.
2377 (sh_arg_type): Added A_REG_B.
2378 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2380 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2382 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2384 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2386 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2388 * Makefile.in (distclean): Remove stamp-h. From Ronald
2389 F. Guilmette <rfg@monkeys.com>.
2391 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2393 From David Mosberger-Tang <davidm@azstarnet.com>:
2394 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2397 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2399 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2400 (sh_table): Added many SH3 opcodes.
2401 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2403 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2405 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2406 (subco,subco.): Mark this PPC, not PPCCOM.
2408 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2410 * configure: Rebuild with autoconf 2.7.
2412 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2414 * configure: Rebuild with autoconf 2.6.
2416 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2418 * configure.in: Sort list of architectures. Accept but do nothing
2419 for alliant, convex, pyramid, romp, and tahoe.
2421 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2423 * a29k-dis.c (print_special): Change num to unsigned int.
2425 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2427 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2430 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2432 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2433 * configure: Rebuilt.
2435 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2437 * configure.in: Add case for bfd_i860_arch.
2438 * configure: Rebuild.
2440 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2442 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2443 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2444 (NEXTDOUBLE): Likewise.
2445 (print_insn_m68k): Don't match fmoveml if there is more than one
2446 register in the list.
2447 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2449 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2451 * m68k-opc.c: Use #W rather than #w.
2452 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2454 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2456 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2457 and likewise for all the dbxx opcodes.
2459 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2461 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2463 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2465 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2466 the VR4100 specific instructions to the mips_opcodes structure.
2468 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2470 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2471 ugly Metrowerks bug in CW6, is fixed in CW7.
2473 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2475 * ppc-opc.c (whole file): Add flags for common/any support.
2477 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2479 * Makefile.in (BISON): Remove macro.
2480 (FLAGS_TO_PASS): Remove BISON.
2482 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2484 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2486 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2487 instructions that take no args by looking at the match mask.
2488 (print_insn_arg): Always print "%" before register names.
2489 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2490 [case '_']: Don't print "@#" before address.
2491 [case 'J']: Use "%s" as format string, not register name.
2492 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2494 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2496 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2499 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2501 From David Mosberger-Tang <davidm@azstarnet.com>
2503 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2504 (alpha_insn_set): added definitions for VAX floating point
2505 instructions (Unix compilers don't generate these, but handcoded
2506 assembly might still use them).
2508 * alpha-dis.c (print_insn_alpha): added support for disassembling
2509 the miscellaneous instructions in the Alpha instruction set.
2511 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2513 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2514 no longer create sysdep.h, sed ppc-opc.c to work around a
2515 serious Metrowerks C bug.
2516 * mpw-make.in: Remove.
2517 * mpw-make.sed: New file, used by mpw-configure to edit
2518 Makefile.in into an MPW makefile.
2520 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2522 * Makefile.in (maintainer-clean): New synonym for realclean.
2524 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2526 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2527 which use '0', '1', and '2' instead. Specify the proper size for
2528 a pmove immediate operand. Correct the pmovefd patterns to be
2529 moves to a register, not from a register.
2530 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2532 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2534 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2535 %psr, %wim, %tbr as F_NOTV9.
2537 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2539 * Makefile.in (Makefile): Just rebuild Makefile when running
2541 (config.h, stamp-h): New targets.
2542 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2543 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2544 rebuilding config.h.
2545 * configure: Rebuild.
2547 * mips-opc.c: Change unaligned loads and stores with "t,A"
2548 operands to use "t,A(b)".
2550 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2552 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2554 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2556 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2557 until 3 instead of until 2.
2559 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2561 * Makefile.in (ALL_CFLAGS): Define.
2562 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2563 (MOSTLYCLEAN): Add config.log.
2564 (distclean): Don't remove config.log.
2565 * configure.in: Substitute HDEFINES.
2566 * configure: Rebuild.
2568 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2570 * sh-opc.h (sh_arg_type): Add F_FR0.
2571 (sh_table, case fmac): Add F_FR0 as first argument.
2573 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2575 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2577 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2579 * sparc-dis.c: Remove all references to NO_V9.
2581 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2583 * aclocal.m4: Just include ../bfd/aclocal.m4.
2584 * configure: Rebuild.
2586 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2588 * sparc-dis.c (X_DISP19): Define.
2589 (print_insn, case 'G'): Use it.
2590 (print_insn, case 'L'): Sign extend displacement.
2592 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2594 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2595 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2596 host_makefile_frag or frags.
2597 * aclocal.m4: New file.
2598 * configure: Rebuild.
2599 * Makefile.in (INSTALL): Set to @INSTALL@.
2600 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2601 (INSTALL_DATA): Set to @INSTALL_DATA@.
2603 (AR_FLAGS): Set to rc rather than qc.
2604 (CC): Define as @CC@.
2605 (CFLAGS): Set to @CFLAGS@.
2606 (@host_makefile_frag@): Remove.
2607 (config.status): Remove dependency upon @frags@.
2609 * configure.in: ../bfd/config.bfd now just sets shell variables.
2610 Use them rather than looking through target Makefile fragments.
2611 * configure: Rebuild.
2613 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2615 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2617 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2619 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2620 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2623 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2624 (lookup_{name,value}): New functions.
2625 (prefetch_table): New static local.
2626 (sparc_{encode,decode}_prefetch): New functions.
2627 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2629 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2631 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2634 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2636 * sh-dis.c: Correct comment on first line of file.
2638 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2640 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2642 * sparc-opc.c (asi, membar): New static locals.
2643 (sparc_{encode,decode}_{asi,membar}): New functions.
2644 (sparc_opcodes, membar insn): Fix.
2645 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2646 Support decoding of membar masks.
2649 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2651 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2653 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2655 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2656 and likewise for the other branches. Add bhs as an alias for bcc,
2657 and likewise for the size variants. Add dbhs as an alias for
2660 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2662 * sh-opc.h (FP sts instructions): Update to match reality.
2664 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2666 * m68k-dis.c: (fpcr_names): Add % before all register names.
2667 (reg_names): Likewise.
2668 (print_insn_arg): Don't explicitly print % before register names.
2669 Add % before register names in static array names. In case 'r',
2670 print data registers as `@(Dn)', not `Dn@'. When printing a
2671 memory address, don't print @# before it.
2672 (print_indexed): Change base_disp and outer_disp from int to
2673 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2674 syntax. Sign extend 8 byte displacement correctly.
2675 (print_base): Print using MIT syntax. Print zpc when appropriate.
2676 Change parameter disp from int to bfd_vma.
2678 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2681 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2683 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2684 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2685 * sh-opc.h (sh_arg_type): Add new operand types.
2686 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2688 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2690 * Makefile.in (distclean): Remove generated file config.h.
2692 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2694 * Makefile.in (distclean): Remove generated file config.h.
2696 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2698 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2700 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2702 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2703 rather than numopcodes. Use m68k_opcodes rather than removed
2704 opcode function. Don't check F_ALIAS.
2705 (print_insn_arg): Change first parameter to be const char *.
2706 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2707 (m68k-opc.o): New target.
2708 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2709 * configure: Rebuild.
2711 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2713 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2714 (opcode_bits, opcode_hash_table): New variables.
2715 (opcodes_initialized): Renamed from opcodes_sorted.
2716 (build_hash_table): New function.
2717 (is_delayed_branch): Use hash table.
2718 (print_insn): Renamed from print_insn_sparc, made static.
2719 Build and use hash table. If !sparc64, ignore sparc64 insns,
2720 and vice-versa if sparc64.
2721 (print_insn_sparc, print_insn_sparc64): New functions.
2722 (compare_opcodes): Move sparc64 opcodes to end.
2723 Print commutative insns with constant second.
2724 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2726 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2728 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2729 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2730 avoids printing a delay slot in a delay slot.
2731 * sh-opc.h (sh_table): Fully bracket last entry.
2733 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2735 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2737 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2739 * configure.in: Get host_makefile_frag from ${srcdir}.
2741 * configure.in: Autoconfiscated. Check for string[s].h. Create
2742 config.h from config.in. Don't set up sysdep.h link.
2743 * sysdep.h: New file.
2744 * configure, config.in: New files, generated from configure.in.
2745 * Makefile.in: Updated to be processed autoconf-style.
2746 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2747 (Makefile): Depend on config.status.
2748 (config.status): New rule.
2749 * configure.bat: Update Makefile substitutions.
2751 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2753 * mips-opc.c (L1): Define.
2754 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2755 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2758 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2760 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2761 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2762 have multiple add units but only a single logical unit.
2764 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2765 shifted by 18, without any insertion or extraction function.
2766 (insert_cr, extract_cr): Remove.
2768 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2770 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2773 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2775 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2776 * sh-opc.h: Add copyright.
2778 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2780 * Makefile.in (crunch-m68k): Delete extra target accidentally
2781 checked in a while ago.
2783 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2785 * sh-opc.h (sh_table): Add SH3 support.
2787 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2789 * sh-opc.h: Added bsrf and braf.
2791 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2793 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2794 bogus [ls]fm{ea,fd} patterns.
2796 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2797 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2798 initialize it from memory. Make function static.
2799 (print_insn_{big,little}_arm): New functions.
2800 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2801 the correct endianness.
2803 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2805 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2808 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2810 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2811 17th, so that it builds again using GCC as the compiler.
2813 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2815 * mips-dis.c (print_insn_little_mips): Cast return value from
2816 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2817 expects an unsigned long, and that might be fewer words of
2818 argument storage (e.g., if bfd_vma is long long on a 32-bit
2820 (print_insn_big_mips): Likewise with bfd_getb32 value.
2821 (_print_insn_mips): Now static.
2823 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2825 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2826 gcc memory hog problem with initializer is fixed.
2828 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2830 Merge in support for Mac MPW as a host.
2831 (Old change descriptions retained for informational value.)
2833 * mpw-config.in (archname): Compute from the config.
2834 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2836 * mpw-config.in (target_arch): Compute from canonical target.
2837 (m68k, mips, powerpc, sparc): Add architectures.
2838 * mpw-make.in (disassemble.c.o): Add.
2839 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2841 * mpw-config.in (BFD_MACHINES): Set to a default value.
2842 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2844 * mpw-make.in (CSEARCH): Add extra-include to search path.
2846 * mpw-config.in (varargs.h): Don't create.
2847 (sysdep.h): Create using forward-include.
2848 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2850 * mpw-config.in: New file, MPW version of configure.in.
2851 * mpw-make.in: New file, MPW version of Makefile.in.
2853 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2855 * alpha-dis.c (print_insn_alpha): Put empty statement after
2858 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2860 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2861 (low_sign_extend): Likewise.
2862 (get_field): Delete unused function.
2863 (set_field, deposit_14, deposit_21): Likewise.
2865 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2867 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2870 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2872 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2874 * alpha-opc.h (OSF_ASMCODE): define
2875 print pal-code names as defined in App C of the
2876 Alpha Architecture Reference Manual
2878 * alpha-dis.c: cleaned up output
2879 print stylized code forms as defined in App A.4.3 of the
2880 Alpha Architecture Reference Manual
2882 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2884 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2886 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2889 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2891 * m68k-dis.c (opcode): New function. Returns address of opcode
2892 table entry given index, even if the opcode table was split to
2893 work around gcc bugs.
2894 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2896 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2897 (reg_names): Now const.
2898 (print_insn_arg): Arrays cacheFieldName and names now const.
2899 (print_indexed): Array scales now const.
2901 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2903 * ppc-opc.c: Sort recently added instructions by minor opcode
2904 number within major opcode number.
2906 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2908 * hppa-dis.c: Include libhppa.h.
2910 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2912 * mips-opc.c: Change dli to use M_DLI, and add dla.
2914 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2916 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2918 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2920 * mips-opc.c: Add r4650 mul instruction.
2922 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2924 * mips-opc.c: Add uld and usd macros for unaligned double load and
2927 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2929 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2930 mfdcr, mtdcr, icbt, iccci.
2932 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2934 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2935 signed char fields to shorts, more portable.
2937 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2939 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2940 char fields as signed chars, since they may have negative values.
2942 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2944 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2945 (mycroft@netbsd.org).
2947 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2949 From "Logg, Ed" <elogg@ea.com>:
2950 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2951 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2954 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2956 * ppc-opc.c: Changes based on patch from David Edelsohn
2957 <edelsohn@mhpcc.edu>.
2958 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2961 (insert_tbr): New static function.
2962 (extract_tbr): New static function.
2963 (XFXFXM_MASK, XFXM): Define.
2964 (XSPRBAT_MASK, XSPRG_MASK): Define.
2965 (powerpc_opcodes): Add instructions to access special registers by
2966 name. Add mtcr and mftbu.
2968 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2970 * mips-opc.c (P3): Define.
2971 (mips_opcodes): Add mad and madu.
2973 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2975 * configure.in: Add W65 support.
2976 * disassemble.c: Likewise.
2977 * w65-opc.h, w65-dis.c: New files.
2979 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2981 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2984 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2986 * mips-opc.c: Add dli as a synonym for li.
2988 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2990 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2991 print something for reserved opcode values, even if it won't
2994 * mips-dis.c (_print_insn_mips): When initializing, shift right
2995 and mask, to avoid sign extension problems on the Alpha.
2997 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3000 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3002 * sh-opc.h (mov.l gbr): Get direction right.
3003 * sh-dis.c (print_insn_shx): New function.
3004 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3005 print opcodes with right byte order.
3007 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3009 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3010 to avoid conflicts with getopt.
3012 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3014 * hppa-dis.c (print_insn_hppa): Read the instruction using
3015 bfd_getb32, so that it works on a little endian or 64 bit host.
3016 Remove unused local variable op.
3018 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3020 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3021 addu does not work correctly if -mips3.
3023 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3025 * a29k-dis.c (print_special): Add special register names defined
3026 on 29030, 29040 and 29050.
3027 (print_insn): Handle new operand type 'I'.
3029 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3031 * Makefile.in (INSTALL): Use top level install.sh script.
3033 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3035 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3036 that it works on a little endian host.
3038 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3040 * configure.in: Use ${config_shell} when running config.bfd.
3042 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3044 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3046 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3048 * a29k-dis.c (print_insn): Print the opcode.
3050 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3052 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3054 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3056 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3058 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3060 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3061 which store a value into memory.
3063 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3065 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3066 * arm-dis.c, arm-opc.h: New files.
3068 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3070 * Makefile.in (ns32k-dis.o): Add dependency.
3071 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3072 string, not as array of chars.
3074 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3076 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3078 * sparc-opc.c: Added sparclite extended FP operations, and
3079 versions of v9 impdep* instructions permitting specification of
3082 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3084 * i960-dis.c (reg_names): Now const.
3085 (struct sparse_tabent): New type, copied from array type in mem
3087 (ctrl): Local static array ctrl_tab now const.
3088 (cobr): Local static array cobr_tab now const.
3089 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3090 static variable mem_tab no longer explicitly initialized. Changed
3091 mem_init to const array of struct sparse_tabent.
3092 (reg): Local static variable reg_tab no longer explicitly
3093 initialized. Changed reg_init to const array of struct
3095 (ea): Local static array scale_tab now const.
3097 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3100 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3102 * configure.bat: the disassember needs to be enabled for
3103 "objdump -d" to work in djgpp.
3105 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3107 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3108 (invalid_float): Enabled general version, doesn't require running
3109 on ns32k host. Changed to take char* argument, and test for
3110 explicitly specified sizes, instead of using sizeof() on host CPU
3112 (INVALID_FLOAT): Cast first argument.
3113 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3114 list_P032, list_M032): Now const.
3115 (optlist, list_search): Made appropriate arguments now point to
3117 (print_insn_arg): Changed static array of one-character-string
3118 pointers into a static const array of characters; fixed sprintf
3119 statement accordingly.
3121 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3123 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3124 from distribution. A ns32k-dis.c from a previous distribution has
3125 been brought up to date and supports the new interface.
3127 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3129 * configure.in: add bfd_ns32k_arch target support.
3131 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3132 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3134 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3136 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3139 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3141 * h8300-dis.c, mips-dis.c: Don't use true and false.
3143 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3145 * configure.in: Change --with-targets to --enable-targets.
3147 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3149 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3150 opcodes to the first instruction with that opcode, to speed
3151 disassembly of large files. From ralphc@pyramid.com (Ralph
3154 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3156 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3158 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3160 * configure.bat: update to latest makefile.in
3162 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3164 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3165 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3166 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3167 slot insn is in a delay slot.
3168 * z8k-opc.h: (resflg): Fix patterns.
3169 * h8500-opc.h Fix CR insn patterns.
3171 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3173 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3174 "cmpl" before POWER versions, so that gas -many uses them.
3176 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3178 * disassemble.c: New file.
3179 * Makefile.in (OFILES): Add disassemble.o.
3180 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3181 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3182 binutils/configure.in.
3184 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3185 opcode being examined.
3187 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3189 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3190 (insert_ral, insert_ram, insert_ras): New functions.
3191 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3192 RAS for store with update.
3194 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3196 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3197 (edelsohn@npac.syr.edu).
3199 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3201 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3204 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3206 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3208 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3210 * ppc-opc.c (powerpc_operands): The signedp field has been
3211 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3212 instead. Add new operand SISIGNOPT.
3213 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3214 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3215 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3218 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3220 * i386-dis.c (struct private): Renamed to dis_private. `private'
3221 is a reserved word for dynix cc.
3223 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3225 * configure.in: Change error message to refer to bfd/config.bfd
3226 rather than bfd/configure.in.
3228 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3230 * ppc-opc.c: Define POWER2 as short alias flag.
3231 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3234 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3236 * i960-dis.c (print_insn_i960): Don't read a second word for
3237 opcodes 0, 1, 2 and 3.
3239 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3241 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3243 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3245 * m68881-ext.c: Removed; no longer used.
3246 * Makefile.in: Changed accordingly.
3248 * m68k-dis.c (ext_format_68881): Don't declare.
3249 (print_insn_m68k): If an instruction uses place 'i', it uses at
3250 least four fixed bytes.
3251 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3252 extended float, convert to double using floatformat_to_double, not
3253 ieee_extended_to_double, and fetch the data before converting it.
3255 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3257 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3258 davidj@ICSI.Berkeley.EDU (David Johnson).
3260 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3262 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3263 PowerPC uses bdnz[l][a].
3265 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3267 * dis-buf.c, i386-dis.c: Include sysdep.h.
3269 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3271 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3273 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3274 by Motorola PowerPC 601 with PPC_OPCODE_601.
3275 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3276 Disassemble Motorola PowerPC 601 instructions as well as normal
3277 PowerPC instructions.
3279 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3281 * i960-dis.c (reg, mem): Just use a static array instead of
3284 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3286 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3287 condition name index if this is for a negated condition.
3289 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3290 Floating point format for 'H' operand is backwards from normal
3291 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3292 operands (fmpyadd and fmpysub), handle bizarre register
3293 translation correctly for single precision format.
3295 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3296 or 'I' operands if the next format specifier is 'M' (fcmp
3297 condition completer).
3299 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3301 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3302 single number giving a bitmask for the MB and ME fields of an M
3303 form instruction. Change NB to accept 32, and turn it into 0;
3304 also turn 0 into 32 when disassembling. Seperated SH from NB.
3305 (insert_mbe, extract_mbe): New functions.
3306 (insert_nb, extract_nb): New functions.
3307 (SC_MASK): Mask out SA and LK bits.
3308 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3309 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3310 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3311 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3312 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3313 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3314 (powerpc_macros): Define table of macro definitions.
3315 (powerpc_num_macros): Define.
3317 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3318 if PPC_OPERAND_NEXT is set.
3320 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3322 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3323 char. Retrieve contents using bfd_getl32 instead of shifting.
3325 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3327 * ppc-opc.c: New file. Opcode table for PowerPC, including
3328 opcodes for POWER (RS/6000).
3329 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3330 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3331 (CFILES): Add ppc-dis.c.
3332 (ppc-dis.o, ppc-opc.o): New targets.
3333 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3335 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3337 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3338 No space before 'u', 'f', or 'N'.
3340 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3342 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3343 farther than we should.
3345 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3347 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3349 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3351 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3353 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3354 needs it, to prevent reading past the end of a section.
3356 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3358 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3359 Removed t,A case for la; always use t,A(b) case.
3361 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3363 From Ted Lemen <mellon@pepper.ncd.com>
3364 * mips-dis.c (print_insn_arg): Handle 'k'.
3365 * mips-opc.c: Make cache use k, not t.
3367 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3369 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3370 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3371 FLOAT_FORMAT_CODE to put out floating point register names.
3373 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3375 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3377 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3379 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3381 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3383 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3384 larger than 32. Moved dsxx32 variants first for disassembler.
3386 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3388 * z8kgen.c, z8k-opc.h: Add full lda information.
3390 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3392 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3393 movb instructions. Any necessary space will be emitted by
3394 the code to handle nullification completers.
3396 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3398 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3400 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3402 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3403 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3405 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3407 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3409 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3411 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3412 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3414 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3416 * m88k-dis.c (m88kdis): comment change. Remove space after
3418 (printop): handle new arg types DEC and XREG for m88110.
3420 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3422 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3423 type for absolute branch addresses. Delete special
3424 "ble" and "be" code in 'W' operand code.
3426 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3428 * mips-opc.c: Set hazard information correctly for branch
3429 likely instructions.
3431 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3433 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3434 info->fprintf_func for printing and info->print_address_func for
3437 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3439 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3441 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3443 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3444 Corrected second case of "b" for disassembler.
3446 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3448 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3449 to BFD swapping routines to correspond to BFD name changes.
3451 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3453 * mips-opc.c: Change div machine instruction to be z,s,t rather
3454 than s,t. Change div macro to be d,v,t rather than d,s,t.
3455 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3456 rem and remu which generates only the corresponding div
3457 instruction. This is for compatibility with the MIPS assembler,
3458 which only generates the simple machine instruction when an
3459 explicit destination of $0 is used.
3460 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3462 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3464 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3465 WR_31 hazard for bal, bgezal, bltzal.
3467 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3469 * hppa-dis.c (print_insn_hppa): Use print function
3470 from within the disassemble_info, not fprintf_filtered.
3472 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3474 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3475 Law, law@cs.utah.edu.)
3477 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3479 * mips-opc.c ("absu"): Removed.
3482 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3484 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3485 Changed hazard information to distinguish between memory load
3486 delays and coprocessor load delays.
3488 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3490 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3492 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3494 * configure.in: Don't pass cpu to config.bfd.
3496 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3498 * m88k-dis.c (m88kdis): Make class unsigned.
3500 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3502 * alpha-dis.c (print_insn_alpha): One branch format case was
3503 missing the instruction name.
3505 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3507 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3508 Add the arch-specific auxiliary files.
3509 (OFILES): Remove the arch-specific auxiliary files
3510 and use BFD_MACHINES instead of DIS_LIBS.
3511 * configure.in: Set BFD_MACHINES based on --with-targets option.
3513 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3515 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3518 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3520 * sparc-opc.c: Change CONST to const to deal with gcc
3521 -Dconst=__const -traditional.
3523 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3525 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3526 coprocessor instructions out of #if 0, and made them use new
3529 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3531 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3533 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3535 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3536 instruction, for use by the disassembler.
3538 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3539 hand-coded sign extensions that depended on 32-bit host ints.
3540 FIXME, we still depend on big-endian host bitfield ordering.
3541 (sparc_print_insn): Set the insn_info_valid field, and the
3542 other fields that describe the instruction being printed.
3544 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3546 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3547 `jmp' instead of just one of them.
3549 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3551 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3552 (fput_fp_reg_r): Renamed from fput_reg_r.
3553 (fput_fp_reg): New function.
3554 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3556 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3558 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3560 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3562 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3564 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3565 don't output a space.
3567 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3569 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3571 * mips-opc.c: New file, containing opcode table from
3572 ../include/opcode/mips.h.
3573 * Makefile.in: Add it.
3575 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3577 * m88k-dis.c: New file, moved in from gdb and changed to use the
3578 new dis-asm.h disassembler interface.
3579 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3580 (m88k-dis.o): New target.
3582 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3584 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3585 argument string const char * to correspond to opcode/mips.h.
3587 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3589 * mips-dis.c: Updated to account for name changes in new version
3591 * Makefile.in: Added header file dependencies.
3593 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3595 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3597 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3599 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3600 extend, rather than shifts.
3602 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3604 * Makefile.in: Undo 15 June change.
3606 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3608 * m68k-dis.c (print_insn_arg): Change return value to byte count
3610 * m68k-dis.c: Re-write to detect invalid operands before
3611 printing anything, so we can handle this the same way we
3612 handle invalid opcodes.
3614 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3616 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3618 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3620 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3623 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3625 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3627 * configure.in: Do make sysdep.h link.
3628 * Makefile.in: Search ../include. Don't search ../bfd.
3630 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3632 Changes from Jeff Law, law@cs.utah.edu:
3633 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3634 Do not print a space before the completers specified by
3637 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3639 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3640 defined, since gdb has been fixed.
3642 Changes from Jeff Law, law@cs.utah.edu:
3643 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3644 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3645 be a *disassemble_info, not a *FILE.
3646 * hppa-dis.c: Support 'd', '!', and 'a'.
3647 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3648 * hppa-dis.c: Delete cases which are no longer needed.
3650 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3652 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3654 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3656 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3659 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3661 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3662 * configure.in: No longer need to configure to get sysdep.h.
3664 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3666 * Patches from Jeffrey Law <law@cs.utah.edu>.
3667 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3668 templates for 1.1 FP computational instructions.
3670 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3672 * h8500-dis.c (print_insn_h8500): Address argument is type
3674 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3677 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3678 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3680 * sparc-dis.c (compare_opcodes): Move static declaration to
3683 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3685 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3686 instruction, remove unimp hack from 'l' argument.
3688 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3690 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3693 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3695 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3696 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3699 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3701 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3702 arrays of string pointers to 2-d arrays of chars, to save
3705 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3707 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3708 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3710 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3712 * hppa-dis.c: New file from Utah, adapted to new disassembler
3714 * Makefile.in: Include it.
3716 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3718 * sh-dis.c, sh-opc.h: New files.
3720 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3722 * alpha-dis.c, alpha-opc.h: New files.
3724 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3726 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3729 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3731 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3733 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3735 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3738 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3740 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3741 and double percent signs a few places.
3743 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3745 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3746 Use info->print_address_func not print_address.
3748 * dis-buf.c (generic_print_address): New function.
3750 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3752 * Makefile.in: Add sparc-dis.c.
3753 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3755 Add `add' instruction to the set that get checked
3756 for a preceding `sethi' in order to print an absolute address.
3757 * (print_insn): Disassembly prefers real instructions.
3758 (is_delayed_branch): Speed up.
3759 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3760 Still missing some float ops, and needs testing.
3761 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3762 F_ALIAS. Use printf, not fprintf, when not passing a file
3764 (compare_opcodes): Check that identical instructions have
3765 identical opcodes, complain otherwise.
3768 * Include reg_names.
3770 Use dis-asm.h/read_memory_func interface.
3772 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3774 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3775 deliberately return non-zero to setjmp from longjmp. Otherwise
3776 this code fails to compile.
3778 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3780 * m68k-dis.c: Fix prototype for fetch_arg().
3782 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3784 * dis-buf.c: New file, for new read_memory_func interface.
3785 Makefile.in (OFILES): Include it.
3786 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3787 Use new read_memory_func interface.
3789 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3791 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3792 * h8500-opc.h: Fix couple of opcodes.
3794 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3796 * Makefile.in: add dvi & installcheck targets
3798 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3800 * Makefile.in: Update for h8500-dis.c.
3802 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3804 * h8500-dis.c, h8500-opc.h: New files
3806 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3808 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3809 ../include/dis-asm.h.
3810 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3811 and ../gdb/m68k-pinsn.c).
3812 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3813 and ../gdb/i386-pinsn.c).
3814 * m68881-ext.c: New file. Moved definition of
3815 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3816 * Makefile.in: Adjust for new files.
3817 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3818 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3819 can be dis-assembled.
3821 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3823 * mips-dis.c (print_insn_arg): Now returns void.
3825 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3827 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3828 files that use the macros.
3830 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3832 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3833 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3834 (CFILES): Added mips-dis.c.
3836 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3838 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3839 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3841 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3843 * Makefile.in: Improve *clean rules.
3844 * configure.in: Allow a default host.
3846 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3848 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3849 files include other sysdep files
3851 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3853 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3855 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3857 * configure.in: For host support, use ../bfd/configure.host
3858 so it stays in sync with the ../bfd/hosts database.
3860 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3862 * configure.in: use cpu-vendor-os triple instead of nested cases
3864 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3866 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3867 *always* the wrong one.
3869 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3871 * z8kgen.c: added copyright info
3873 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3875 * z8k-dis.c (unparse_instr): prettier tabs
3876 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3878 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3880 * configure.in: Add ncr* configuration.
3881 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3882 picayune ANSI compilers happy.
3884 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3886 * configure.in (i386): Make i386 and i486 synonymous for now.
3887 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3889 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3891 * Makefile.in (install): Fix typo.
3893 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3895 * Makefile.in (make): Remove obsolete crud.
3896 (sparc-opc.o): Avoid Sun Make VPATH bug.
3898 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3900 * Makefile.in: since there are no SUBDIRS, remove rule and
3901 references of subdir_do.
3903 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3905 * Makefile.in (install): Get the library name right here too.
3906 Don't install bfd.h, since it's unrelated to this library. No
3907 subdirs to recurse into, either.
3908 (CFILES): The source file has a .c suffix, not .o.
3910 * sparc-opc.c: New file, moved from BFD.
3911 * Makefile.in (OFILES): Build it.
3913 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3915 * z8k-dis.c: fixed forward refferences of some declarations.
3917 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3919 * Makefile.in: get the name of the library right
3921 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3923 * z8k-dis.c: knows how to disassemble z8k stuff
3924 * z8k-opc.h: new file full of z8000 opcodes
3928 version-control: never