2 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
4 * mips-opc.c: Add many missing r5900 instructions.
8 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
10 * d30v-opc.c (d30v_opcode_table): Set new flags bits
11 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
14 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
16 * configure: Only build libopcodes shared if --enable-shared's value
17 was `yes', or was set to `*opcodes*'.
18 * aclocal.m4: Likewise.
19 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
20 original source of this bit of code. It's not clear what the best fix
24 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
26 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
29 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
31 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
32 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
33 offset forms before the 15 bit forms, to default to the long forms.
36 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
38 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
40 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
42 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
43 symbol if none is present.
44 (print_insn_big_arm): Prevent examination of stored symbol if
47 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
49 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
51 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
53 * disassemble.c: Remove disasm_symaddr() function.
55 * arm-dis.c: Use info->symbol instead of info->flags to determine
56 if disassmbly should be in Thumb or Arm mode.
58 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
60 * arm-dis.c: Add support for disassembling Thumb opcodes.
61 (print_insn_thumb): New function.
63 * disassemble.c (disasm_symaddr): New function.
65 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
66 (thumb_opcodes): Table of Thumb opcodes.
68 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
70 * m68k-opc.c (btst): Change Dd@s to Dd;b.
72 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
73 and 'v' as operand types.
75 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
77 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
78 <olivier.carmona@di.epfl.ch>.
79 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
80 which has a two word opcode with a one word argument.
83 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
85 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
87 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
91 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
93 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
94 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
95 (ftrv): Slay the cut-and-paste monster.
98 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
100 * d10v-dis.c (print_operand):
101 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
103 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
105 * d10v-opc.c (OPERAND_FLAG): Split into:
106 (OPERAND_FFLAG, OPERAND_CFLAG) .
110 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
112 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
113 field for all INSN_MACRO's.
116 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
118 * mips-opc.c (sync,cache): These are 3900 insns.
120 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
122 sh-opc.h (sh_table): Remove ftst/nan.
124 start-sanitize-vr5400
125 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
127 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
128 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
130 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
134 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
136 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
137 Add tx49 insns and configury.
140 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
142 * mips-opc.c (ffc, ffs): Fix mask.
145 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
147 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
151 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
153 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
154 start-sanitize-vr5400
155 Added VR5400 instructions.
156 (N5): New cpu-id macro.
158 (WR_HILO, RD_HILO, MOD_HILO): New macros.
160 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
162 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
163 (WR_HILO, RD_HILO, MOD_HILO): New macros.
165 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
167 * v850-dis.c (disassemble): Replace // with /* ... */
169 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
171 * sparc-opc.c: Add wr & rd for v9a asr's.
172 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
173 (v9a_asr_reg_names): New variable.
174 Patch from David Miller <davem@vger.rutgers.edu>.
176 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
178 * sparc-opc.c (v9notv9a): New insn type.
179 (IMPDEP): Move to the end to not conflict with edge8 et al.
180 Patch from David Miller <davem@vger.rutgers.edu>.
182 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
184 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
186 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
188 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
190 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
192 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
193 of disassemble_info structure to determine if an overlay address
194 has a matching symbol in low memory.
196 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
197 new symbol_at_address_func field in disassemble_info structure.
199 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
201 * v850-opc.c (extract_d22): Use signed arithmatic.
203 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
205 * mips-opc.c: Three op mult is not an ISA insn.
207 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
209 * mips-opc.c: Fix formatting.
211 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
213 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
214 than assuming that char is signed. Explicitly sign extend 16 bit
215 values, rather than assuming that short is 16 bits.
216 (OP_sI, OP_J, OP_DIR): Likewise.
219 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
221 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
225 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
227 * v850-opc.c: Fix typo in comment.
229 * v850-dis.c (disassemble): Add test of processor type when
232 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
234 * configure.in: Use a diversion to set enable_shared before the
235 arguments are parsed.
236 * configure: Rebuild.
238 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
240 * m68k-opc.c (TBL1): Use ! rather than `.
241 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
243 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
245 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
247 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
249 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
252 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
253 * aclocal.m4: Rebuild with new libtool.
254 * configure: Rebuild.
257 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
259 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
262 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
264 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
266 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
268 * v850-opc.c (v850_opcodes): Further rearrangements.
271 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
273 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
276 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
278 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
281 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
283 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
285 * mips16-opc.c: Added mips16 sdbbp.
288 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
290 * v850-opc.c: Initialise processors field of v850_opcode structure.
293 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
295 Merge changes from Martin Hunt:
297 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
299 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
300 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
301 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
303 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
305 * d30v-dis.c (print_insn): First operand of d*i (delayed
306 branch) instructions is relative.
308 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
309 (d30v_operand_table): Add IMM6S3 type.
310 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
312 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
313 and cmp instructions.
315 * d30v-opc.c: Correct entries for repeat*, and sat*.
316 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
317 types. Correct several formats.
319 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
321 * d30v-opc.c (pre_defined_registers): Change control registers.
323 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
324 SHORT_C2. Manual was incorrect.
326 * d30v-dis.c (lookup_opcode): Return value now indicates
327 if an opcode has a short and a long form. Used for deciding
328 to append a ".s" or ".l".
329 (print_insn): Append a ".s" to an instruction if it is
330 the short form and ".l" if it is a long form. Do not append
331 anything if the instruction has only one possible size.
333 * d30v-opc.c: Change mulx2h to require an even register.
334 New form: SHORT_A2; a SHORT_A form that needs an even
335 register as the first operand.
337 * d30v-dis.c (print_insn_d30v): Fix problem where the last
338 instruction was not being disassembled if there were an odd
339 number of instructions.
341 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
345 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
347 * v850-dis.c (disassemble): Improved display of register lists.
350 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
352 * sparc-opc.c (sparc_opcodes): Fix assembler args to
353 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
354 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
355 fandnot1s, fandnot2s.
357 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
359 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
361 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
363 * cgen-asm.c (cgen_parse_address): New argument resultp.
365 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
367 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
369 * mn10200-dis.c (disassemble): PC relative instructions are
370 relative to the next instruction, not the current instruction.
372 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
374 * v850-dis.c (disassemble): Only signed extend values that are not
375 returned by extract functions.
376 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
378 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
380 * v850-opc.c: Update comments. Remove use of
381 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
383 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
385 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
387 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
389 * configure: Rebuilt with latest devo autoconf for NT support.
391 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
393 * v850-dis.c (disassemble): Use curly brace syntax for register
396 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
397 where r0 is being used as a destination register.
400 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
402 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
406 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
408 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
409 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
410 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
411 Add insns to access SGR and DBR.
412 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
415 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
417 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
420 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
422 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
423 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
426 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
428 * configure (cgen_files): Add support for v850e target.
429 * configure.in (cgen_files): Add support for v850e target.
431 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
433 * configure (cgen_files): Add support for v850ea target.
434 * configure.in (cgen_files): Add support for v850ea target.
437 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
439 * configure.in (bfd_arc_arch): Add.
440 * configure: Rebuild.
441 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
442 * Makefile.in: Rebuild.
443 * arc-dis.c, arc-opc.c: New files.
444 * disassemble.c (ARCH_all): Define ARCH_arc.
445 (disassembler): Add ARC support.
447 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
450 * v850-dis.c (disassemble): Add support for v850EA instructions.
452 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
453 (v850_opcodes): Add v850EA instructions.
455 * v850-dis.c (disassemble): Add support for v850E instructions.
457 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
458 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
459 insert_spe, extract_spe): New Functions.
460 (v850_opcodes): Add v850E instructions.
463 * v850-opc.c: Reorganised and re-layed out to improve readability
466 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
468 * configure: Rebuild with autoconf 2.12.1.
470 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
472 * aclocal.m4, configure: Rebuild with new automake patches.
474 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
476 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
477 * acinclude.m4: Just include acinclude.m4 from BFD.
478 * aclocal.m4, configure: Rebuild.
480 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
482 * Makefile.am: New file, based on old Makefile.in.
483 * acconfig.h: New file.
484 * acinclude.m4: New file.
485 * stamp-h.in: New file.
486 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
487 Removed shared library handling; now handled by libtool. Replace
488 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
489 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
490 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
491 handling in AC_OUTPUT.
492 * dep-in.sed: Change .o to .lo.
493 * Makefile.in: Now built with automake.
494 * aclocal.m4: Now built with aclocal.
495 * config.in, configure: Rebuild.
497 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
499 * mips-opc.c: Fix typo/thinko in "eret" instruction.
502 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
504 * mips-opc.c: Fix coding of mtsa.
507 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
509 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
511 * sparc-dis.c (sorted_opcodes): New static local.
512 (struct opcode_hash): `opcode' is pointer to const element.
513 (build_hash): First arg is now table of sorted pointers.
514 (print_insn_sparc): Sort opcodes by sorting table of pointers.
515 (compare_opcodes): Update.
517 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
519 * cgen-opc.c: #include <ctype.h>.
520 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
521 Handle case insensitive hashing.
522 (hash_keyword_value): Change type of `value' to unsigned int.
524 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
526 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
527 precision FP, mark it as such. Likewise for double precision
528 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
531 (mips_builtin_opcodes): Remove non-existant r5900 instructions
535 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
537 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
538 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
541 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
543 * ppc-opc.c (extract_nsi): make unsigned expression signed before
545 (UNUSED): remove one level of parens, so MSVC doesn't choke on
546 nesting depth when all the macros are expanded.
548 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
550 * sparc-opc.c: The fcmp v9a instructions take an integer register
551 as a destination, not a floating point register. From Christian
552 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
554 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
556 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
557 syntax. From Roman Hodek
558 <rnhodek@faui22c.informatik.uni-erlangen.de>.
560 * i386-dis.c (twobyte_has_modrm): Fix pand.
562 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
564 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
566 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
568 * arm-dis.c: Add prototypes for arm_decode_shift and
571 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
573 * mips-opc.c: Add r3900 insns.
575 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
577 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
578 print delay slot instructions on the same line. When using a PC
579 relative load, add a comment with the value being loaded if it can
582 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
584 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
585 to pushS/popS for segment regs and byte constant so that
586 pushw/popw printed when in 16 bit data mode.
588 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
589 print cbtw, cwtd in 16 bit data mode.
590 * i386-dis.c (putop): extra case W to support above.
592 * i386-dis.c (print_insn_x86): print addr32 prefix when given
593 address size prefix in 16 bit address mode.
595 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
597 * sh-dis.c: Reindent. Rename local variable fprintf to
600 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
602 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
604 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
606 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
608 * mips16-opc.c (mip16_opcodes): same.
610 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
612 * m68k-opc.c (moveb): Change $d to %d.
614 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
616 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
617 (twobyte_has_modrm): Likewise.
619 (OP_MMX, OP_EM, OP_MS): New static functions.
621 * i386-dis.c: Revert patch of April 4. The output now matches
624 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
626 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
629 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
631 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
633 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
635 * Makefile.in (install): Depend upon installdirs.
636 (installdirs): New target.
638 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
640 From Thomas Graichen <graichen@rzpd.de>:
641 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
642 * configure: Rebuild.
644 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
646 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
647 Delete string{,s}.h support.
649 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
651 * cgen-asm.c (cgen_parse_operand_fn): New global.
652 (cgen_parse_{{,un}signed_integer,address}): Update call to
653 cgen_parse_operand_fn.
654 (cgen_init_parse_operand): New function.
655 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
656 from cgen_asm_init_parse.
657 (m32r_cgen_assemble_insn): New operand `errmsg'.
658 Delete call to as_bad, return error message to caller.
659 (m32r_cgen_asm_hash_keywords): #if 0 out.
661 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
663 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
665 [case 'J']: Fix typo in register name.
667 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
669 * configure.in: Substitute SHLIB_LIBS.
670 * configure: Rebuild.
671 * Makefile.in (SHLIB_LIBS): New variable.
672 ($(SHLIB)): Use $(SHLIB_LIBS).
674 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
676 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
678 * cgen-opc.c (hash_keyword_name): Improve algorithm.
680 * disassemble.c (disassembler): Handle m32r.
682 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
684 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
685 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
686 * Makefile.in (CFILES): Add them.
687 (ALL_MACHINES): Add them.
688 (dependencies): Regenerate.
689 * configure.in (cgen_files): New variable.
690 (bfd_m32r_arch): Add entry.
691 * configure: Regenerate.
693 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
695 * configure.in: Correct file names for bfd_mn10[23]00_arch.
696 * configure: Rebuild.
698 * Makefile.in: Rebuild dependencies.
700 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
702 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
705 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
707 * Branched binutils 2.8.
709 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
711 * m10200-dis.c: Rename from mn10200-dis.c.
712 * m10200-opc.c: Rename from mn10200-opc.c.
713 * m10300-dis.c: Rename from mn10300-dis.c
714 * m10300-opc.c: Rename from mn10300-opc.c.
715 * Makefile.in: Update accordingly.
717 * mips16-opc.c: Add mul and dmul macros.
719 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
721 * makefile.vms: Update CFLAGS, add clean target.
723 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
725 * mips-opc.c: Add "wait". From Ralf Baechle
726 <ralf@gnu.ai.mit.edu>.
728 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
729 * configure, config.in: Rebuild.
730 * sysdep.h: Include <stdlib.h> if it exists.
731 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
733 * Makefile.in: Rebuild dependencies.
735 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
737 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
738 Andrew Bray <andy@madhouse.demon.co.uk>.
740 * mips-opc.c: Add cast when setting mips_opcodes.
742 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
744 * v850-dis.c (disassemble): Fix sign extension problem.
745 * v850-opc.c (extract_d*): Fix sign extension problems to make
746 disassembly calculate branch offsets correctly.
748 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
750 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
752 * mips-opc.c: Add dctr and dctw.
755 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
757 * d30v-dis.c (print_insn): Change the way signed constants
760 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
762 * Makefile.in (BFD_H): New variable.
763 (HFILES): New variable.
764 (CFILES): Add all C files.
765 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
766 Delete old dependencies, and build new ones.
767 * dep-in.sed: New file.
769 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
771 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
773 start-sanitize-coldfire
774 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
776 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
779 end-sanitize-coldfire
780 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
782 * mn10200-opc.c: Change "trap" to "syscall".
783 * mn10300-opc.c: Add new "syscall" instruction.
785 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
787 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
788 mulul insns on the coldfire.
790 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
792 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
793 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
794 (print_insn_little_arm): Likewise.
796 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
798 Based on patches from H.J. Lu <hjl@lucon.org>:
799 * i386-dis.c (fetch_data): Add prototype.
800 * m68k-dis.c (fetch_data): Add prototype.
801 (dummy_print_address): Add prototype. Make static.
802 * ppc-opc.c (valid_bo): Add prototype.
803 * sparc-dis.c (build_hash_table): Add prototype.
804 (is_delayed_branch, compute_arch_mask): Add prototypes.
805 (print_insn_sparc): Make several local variables const.
806 (compare_opcodes): Change arguments to const PTR. Add prototype.
807 * sparc-opc.c (arg): Change name field to be const.
808 (lookup_name, lookup_value): Add prototypes. Change table and
809 name parameters to be const.
810 (sparc_encode_asi): Change name parameter to be const.
811 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
812 (sparc_encode_sparclet_cpreg): Likewise.
813 (sparc_decode_asi): Change return type to be const.
814 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
815 (sparc_decode_sparclet_cpreg): Likewise.
817 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
819 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
820 Solaris doesn't like the combined options, and the -f is
822 (stamp-tshlink, install): Likewise.
824 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
826 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
829 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
831 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
833 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
835 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
838 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
840 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
843 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
845 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
847 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
849 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
852 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
854 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
855 floatformat_to_double to make portable.
856 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
859 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
861 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
862 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
864 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
866 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
867 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
870 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
872 * tic80-opc.c (LSI_SCALED): Renamed from this ...
873 (OFF_SL_BR_SCALED): ... to this, and added the flag
874 TIC80_OPERAND_BASEREL to the flags word.
875 (tic80_opcodes): Replace all occurances of LSI_SCALED with
879 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
881 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
882 Change mips_opcodes from const array to a pointer,
883 and change bfd_mips_num_opcodes from const int to int,
884 so that we can increase the size of the mips opcodes table
888 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
890 * tic80-opc.c (tic80_predefined_symbols): Revert change to
891 store BITNUM values in the table in one's complement form
892 to match behavior when assembler is given a raw numeric
893 value for a BITNUM operand.
894 * tic80-dis.c (print_operand_bitnum): Ditto.
898 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
900 * d30v-opc.c: Removed references to FLAG_X.
903 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
905 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
908 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
910 * Makefile.in: Added d30v object files.
911 * configure: (bfd_d30v_arch) Rebuilt.
912 * configure.in: (bfd_d30v_arch) Added new case.
913 * d30v-dis.c: New file.
914 * d30v-opc.c: New file.
915 * disassemble.c (disassembler) Add entry for d30v.
919 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
921 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
922 representations for the floating point BITNUM values.
924 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
926 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
927 in the table in one's complement form, as they appear in the
929 (tic80_symbol_to_value): Use macros to access predefined
931 (tic80_value_to_symbol): Ditto.
932 (tic80_next_predefined_symbol): New function.
933 * tic80-dis.c (print_operand_bitnum): Remove code that did
934 one's complement for BITNUM values.
938 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
940 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
943 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
945 * makefile.vms: Remove 8 bit characters. Update to latest
948 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
950 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
952 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
954 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
955 (IMM24_PCREL): Likewise.
957 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
959 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
960 address for an extended PC relative instruction that is not a
963 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
965 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
969 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
971 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
972 (tic80_opcodes): Sort entries so that long immediate forms
973 come after short immediate forms, making it easier for
974 assembler to select the right one for a given operand.
977 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
979 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
981 (print_insn_mips16): Likewise.
984 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
986 * mips-opc.c: add r5900.
990 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
992 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
993 a symbol class that restricts translation to just that
994 class (general register, condition code, etc).
996 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
998 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
999 and REG_DEST_E for register operands that have to be
1000 an even numbered register. Add REG_FPA for operands that
1001 are one of the floating point accumulator registers.
1002 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1003 (tic80_opcodes): Change entries that need even numbered
1004 register operands to use the new operand table entries.
1005 Add "or" entries that are identical to "or.tt" entries.
1008 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1010 * mips16-opc.c: Add new cases of exit instruction for
1012 * mips-dis.c (print_mips16_insn_arg): Display floating point
1013 registers in operands of exit instruction. Print `$' before
1014 register names in operands of entry and exit instructions.
1016 start-sanitize-tic80
1017 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1019 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1020 pairs for all predefined symbols recognized by the assembler.
1021 Also used by the disassembling routines.
1022 (tic80_symbol_to_value): New function.
1023 (tic80_value_to_symbol): New function.
1024 * tic80-dis.c (print_operand_control_register,
1025 print_operand_condition_code, print_operand_bitnum):
1026 Remove private tables and use tic80_value_to_symbol function.
1029 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1031 * d10v-dis.c (print_operand): Change address printing
1032 to correctly handle PC wrapping. Fixes PR11490.
1034 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1036 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1039 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1041 * mips-dis.c (print_insn_mips16): Set insn_info information.
1042 (print_mips16_insn_arg): Likewise.
1044 * mips-dis.c (print_insn_mips16): Better handling of an extend
1045 opcode followed by an instruction which can not be extended.
1047 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1049 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1050 coldfire moveb instruction to not allow an address register as
1051 destination. Although the documentation does not indicate that
1052 this is invalid, experiments uncovered unexpected behavior.
1053 Added a comment explaining the situation. Thanks to Andreas
1054 Schwab for pointing this out to me.
1056 start-sanitize-tic80
1057 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1059 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1060 entries are presorted so that entries with the same mnemonic are
1061 adjacent to each other in the table. Sort the entries for each
1062 instruction so that this is true.
1065 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1067 * m68k-dis.c: Include <libiberty.h>.
1068 (print_insn_m68k): Sort the opcode table on the most significant
1069 nibble of the opcode.
1071 start-sanitize-tic80
1072 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1074 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1075 "vsub", "vst", "xnor", and "xor" instructions.
1076 (V_a1): Renamed from V_a, msb of accumulator reg number.
1077 (V_a0): Add macro, lsb of accumulator reg number.
1079 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1081 * tic80-dis.c (print_insn_tic80): Broke excessively long
1082 function up into several smaller ones and arranged for
1083 the instruction printing function to be callable recursively
1084 to print vector instructions that have both a load and a
1085 math instruction packed into a single opcode.
1086 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1087 to explain why it comes after the other vector opcodes.
1090 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1092 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1093 move insns to handle immediate operands.
1095 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1097 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1098 fix operand mask in the "moveml" entries for the coldfire.
1100 start-sanitize-tic80
1101 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1103 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1104 New macros for building vector instruction opcodes.
1105 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1106 FMT_LI, which were unused. The field is now a flags field.
1107 Remove some opcodes that are possible, but illegal, such
1108 as long immediate instructions with doubles for immediate
1109 values. Add "vadd" and "vld" instructions.
1111 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1113 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1114 the order more logical. Move the shift alias instructions ("rotl",
1115 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1116 interspersed with the regular sr.x and sl.x instructions. Add
1117 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1118 "sub", "subu", "swcr", and "trap".
1120 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1122 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1123 (OFF_SL_PC): Renamed from OFF_SL.
1124 (OFF_SS_BR): New operand type for base relative operand.
1125 (OFF_SL_BR): New operand type for base relative operand.
1126 (REG_BASE): New operand type for base register operand.
1127 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1128 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1129 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1131 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1132 10 char field, padded with spaces on rhs, rather than a string
1133 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1134 than old TIC80_OPERAND_RELATIVE. Add support for new
1135 TIC80_OPERAND_BASEREL flag bit.
1137 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1139 * tic80-dis.c (print_insn_tic80): Print floating point operands
1141 * tic80-opc.c (SPFI): Add single precision floating point
1142 immediate operand type.
1143 (ROTATE): Add rotate operand type for shifts.
1144 (ENDMASK): Add for shifts.
1145 (n): Macro for the 'n' bit.
1146 (i): Macro for the 'i' bit.
1147 (PD): Macro for the 'PD' field.
1148 (P2): Macro for the 'P2' field.
1149 (P1): Macro for the 'P1' field.
1150 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1154 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1156 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1157 adding in current address for pc-relative operands.
1159 start-sanitize-tic80
1160 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1162 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1163 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1164 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1165 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1166 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1167 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1168 (REG_SCALED, LSI_SCALED): New operand types.
1169 (E): New macro for 'E' bit at bit 27.
1170 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1171 opcodes, including the various size flavors (b,h,w,d) for
1172 the direct load and store instructions.
1174 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1176 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1178 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1179 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1180 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1181 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1182 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1183 masks with "MASK_* & ~M_*" to get the M bit reset.
1184 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1186 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1188 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1189 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1190 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1192 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1193 CC, SICR, and LICR table entries.
1194 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1195 "bcnd", and "brcr" opcodes.
1198 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1200 * ppc-opc.c (powerpc_operands): Make comment match the
1201 actual fields (no shift field).
1202 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1203 start-sanitize-tic80
1204 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1205 partial implementation, work in progress.
1206 * tic80-opc.c (tic80_operands): Begin construction operands table.
1207 (tic80_opcodes): Continue populating opcodes table and start
1208 filling in the operand indices.
1209 (tic80_num_opcodes): Add this.
1212 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1214 * m68k-opc.c: Add #B case for moveq.
1216 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1218 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1219 before they are used.
1221 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1223 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1224 for "breakpoint" instruction.
1226 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1228 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1229 (dep): Use ALL_CFLAGS rather than CFLAGS.
1231 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1233 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1236 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1238 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1239 start-sanitize-tic80
1240 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1243 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1245 * mips16-opc.c: Add "abs".
1247 start-sanitize-tic80
1248 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1250 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1251 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1252 (disassembler): Add bfd_arch_tic80 support to set disassemble
1253 to print_insn_tic80.
1254 * tic80-dis.c (print_insn_tic80): Add stub.
1256 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1258 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1259 * configure: Regenerate with autoconf.
1260 * tic80-dis.c: Add file.
1261 * tic80-opc.c: Add file.
1264 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1266 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1268 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1270 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1271 (mn10200_opcodes): Use it for some logicals and btst insns.
1272 Add "break" and "trap" instructions.
1274 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1276 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1278 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1280 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1281 relative load or add now depends upon whether the instruction is
1284 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1286 * mn10200-dis.c: Finish writing disassembler.
1287 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1288 Fix mask for "jmp (an)".
1290 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1291 handle endianness issues for mn10300.
1293 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1295 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1297 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1298 instruction. Fix opcode field for "movb (imm24),dn".
1300 * mn10200-opc.c (mn10200_operands): Fix insertion position
1303 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1305 * mn10200-opc.c: Create mn10200 opcode table.
1306 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1307 but moving along nicely.
1309 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1311 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1313 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1315 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1316 specifiers for fmovem* instructions.
1318 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1320 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1322 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1324 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1327 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1329 * mn10300-opc.c: Add some comments explaining the various
1332 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1334 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1336 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1339 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1340 operand specifiers in fmovm* instructions.
1342 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1344 * ppc-opc.c (insert_li): Give an error if the offset has the two
1345 least significant bits set.
1347 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1349 * mips-dis.c (print_insn_mips16): Separate the instruction from
1350 the arguments with a tab, not a space.
1352 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1354 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1357 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1360 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1362 * configure: Rebuild with autoconf 2.12.
1364 Add support for mips16 (16 bit MIPS implementation):
1365 * mips16-opc.c: New file.
1366 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1367 (mips16_reg_names): New static array.
1368 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1369 after seeing a 16 bit symbol.
1370 (print_insn_little_mips): Likewise.
1371 (print_insn_mips16): New static function.
1372 (print_mips16_insn_arg): New static function.
1373 * mips-opc.c: Add jalx instruction.
1374 * Makefile.in (mips16-opc.o): New target.
1375 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1376 * configure: Rebuild.
1378 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1380 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1381 operand specifiers in *save, *restore and movem* instructions.
1383 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1386 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1387 register operands for immediate arithmetic, not, neg, negx, and
1388 set according to condition instructions.
1390 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1391 specifier of the effective-address operand in immediate forms of
1392 arithmetic instructions. The specifier for the immediate operand
1393 notes how and where the constant will be stored.
1395 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1397 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1400 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1403 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1405 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1407 * mn10300-dis.c (disassemble): Handle register lists.
1409 * mn10300-opc.c: Fix handling of register list operand for
1410 "call", "ret", and "rets" instructions.
1412 * mn10300-dis.c (disassemble): Print PC-relative and memory
1413 addresses symbolically if possible.
1414 * mn10300-opc.c: Distinguish between absolute memory addresses,
1415 pc-relative offsets & random immediates.
1417 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1419 (disassemble): Handle SPLIT and EXTENDED operands.
1421 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1423 * mn10300-dis.c: Rough cut at printing some operands.
1425 * mn10300-dis.c: Start working on disassembler support.
1426 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1428 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1430 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1432 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1434 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1436 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1438 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1439 register argument is calls and jmp instructions.
1441 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1443 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1444 getx operand. Fix opcode for mulqu imm,dn.
1446 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1448 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1449 in MN10300_OPERAND_SPLIT operands for how many bits
1450 appear in the basic insn word. Add IMM32_HIGH24,
1451 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1452 (mn10300_opcodes): Use new operands as needed.
1454 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1455 for bset, bclr, btst instructions.
1456 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1458 * mn10300-opc.c (mn10300_operands): Remove many redundant
1459 operands. Update opcode table as appropriate.
1460 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1461 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1463 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1465 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1466 operands (for indexed load/stores). Fix bitpos for DI
1467 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1468 few instructions that insert immediates/displacements in the
1469 middle of the instruction. Add IMM8E for 8 bit immediate in
1470 the extended part of an instruction.
1471 (mn10300_operands): Use new opcodes as appropriate.
1473 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1475 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1476 sequential so the assembler never parallelizes it with
1479 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1481 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1482 a data/address register that appears in register field 0
1483 and register field 1.
1484 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1486 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1488 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1489 standard disassembly.
1491 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1492 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1493 Recategorize PALcode instructions.
1495 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1497 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1499 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1501 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1502 there are no operand types.
1504 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1506 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1508 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1510 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1512 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1514 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1516 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1517 and sst.w instructions.
1519 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1522 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1524 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1527 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1529 * ppc-opc.c (PPCPWR2): Define.
1530 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1533 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1535 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1536 field for movhu instruction.
1538 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1539 cast value to "long" not "signed long" to keep hpux10
1542 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1544 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1547 * mn10300-opc.c (FMT*): Remove definitions.
1549 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1550 for shift-by-register opcodes.
1552 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1553 into [AD][MN][01] for encoding the position of the register
1556 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1558 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1559 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1561 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1563 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1564 Fix various typos. Add "PAREN" operand.
1565 (MEM, MEM2): Define.
1566 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1567 operands. Fix several typos.
1569 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1572 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1574 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1575 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1577 (mn10300_opcodes): Break opcode format out into its own field.
1578 Update many operand fields to deal with signed vs unsigned
1579 issues. Fix one or two typos in the "mov" instruction
1580 opcode, mask and/or operand fields.
1582 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1584 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1585 m68851 wasn't reset.
1587 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1589 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1590 all opcodes. Very rough cut at operands for all opcodes.
1592 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1595 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1597 * mn10200-opc.c, mn10300-opc.c: New files.
1598 * mn10200-dis.c, mn10300-dis.c: New files.
1599 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1600 * disassemble.c: Break mn10x00 support into 10200 and 10300
1602 * configure.in: Likewise.
1603 * configure: Rebuilt.
1605 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1607 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1609 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1611 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1613 * disassemble (ARCH_mn10x00): Define.
1614 (disassembler): Handle bfd_arch_mn10x00.
1615 * configure.in: Recognize bfd_mn10x00_arch.
1616 * configure: Rebuilt.
1618 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1620 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1621 accordingly. Don't declare functions using op_rtn.
1623 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1625 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1626 params to be more standard.
1627 * (disassemble): Print absolute addresses and symbolic names for
1628 branch and jump targets.
1629 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1631 * (v850_opcodes): Add breakpoint insn.
1633 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1635 * m68k-opc.c: Move the fmovemx data register cases before the
1636 other cases, so that they get recognized before the data register
1637 does gets treated as a degenerate register list.
1639 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1641 * mips-opc.c: Add a case for "div" and "divu" with two registers
1642 and a destination of $0.
1644 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1646 * mips-dis.c (print_insn_arg): Add prototype.
1647 (_print_insn_mips): Ditto.
1649 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1651 * mips-dis.c (print_insn_arg): Print condition code registers as
1654 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1656 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1658 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1660 * v850-dis.c (disassemble): Make static. Provide prototype.
1662 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1664 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1667 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1669 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1670 ']' characters into the output stream.
1671 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1672 Add "memop" field to all opcodes (for the disassembler).
1673 Reorder opcodes so that "nop" comes before "mov" and "jr"
1674 comes before "jarl".
1676 * v850-dis.c (print_insn_v850): Fix typo in last change.
1678 * v850-dis.c (print_insn_v850): Properly handle disassembling
1679 a two byte insn at the end of a memory region when the memory
1680 region's size is only two byte aligned.
1682 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1684 * v850-dis.c (v850_reg_names): Define.
1685 (v850_sreg_names, v850_cc_names): Likewise.
1686 (disassemble): Very rough cut at printing operands (unformatted).
1688 * v850-opc.c (BOP_MASK): Fix.
1689 (v850_opcodes): Fix mask for jarl and jr.
1691 * v850-dis.c: New file. Skeleton for disassembler support.
1692 * Makefile.in Remove v850 references, they're not needed here.
1693 * configure.in: Add v850-dis.o when building v850 toolchains.
1694 * configure: Rebuilt.
1695 * disassemble.c (disassembler): Call v850 disassembler.
1697 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1698 (insert_d8_6, extract_d8_6): New functions.
1699 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1700 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1702 (IF4A, IF4B): Use "D7" instead of "D7S".
1703 (IF4C, IF4D): Use "D8_7" instead of "D8".
1704 (IF4E, IF4F): New. Use "D8_6".
1705 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1706 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1708 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1709 (v850_operands): Change D16 to D16_15, use special insert/extract
1710 routines. New new D16 that uses the generic insert/extract code.
1711 (IF7A, IF7B): Use D16_15.
1712 (IF7C, IF7D): New. Use D16.
1713 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1715 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1716 message. Issue an error if the branch offset is odd.
1718 * v850-opc.c: Add notes about needing special insert/extract
1719 for all the load/store insns, except "ld.b" and "st.b".
1721 * v850-opc.c (insert_d22, extract_d22): New functions.
1722 (v850_operands): Use insert_d22 and extract_d22 for
1724 (insert_d9): Fix range check.
1726 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1728 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1729 and set bits field to D9 and D22 operands.
1731 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1733 * v850-opc.c (v850_operands): Define SR2 operand.
1734 (v850_opcodes): "ldsr" uses R1,SR2.
1736 * v850-opc.c (v850_opcodes): Fix opcode specs for
1737 sld.w, sst.b, sst.h, sst.w, and nop.
1739 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1741 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1742 end of the opcode table.
1744 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1746 * d10v-opc.c (pre_defined_registers): Added register pairs,
1747 "r0-r1", "r2-r3", etc.
1749 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1751 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1752 Create I16U for an unsigned 16bit mmediate operand.
1753 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1755 * v850-opc.c (v850_operands): Define EP operand.
1756 (IF4A, IF4B, IF4C, IF4D): Use EP.
1758 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1759 with immediate operand, "movhi". Tweak "ldsr".
1761 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1762 correct. Get sld.[bhw] and sst.[bhw] closer.
1764 * v850-opc.c (v850_operands): "not" is a two byte insn
1766 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1768 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1770 * v850-opc.c (two): Get order of words correct.
1772 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1774 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1775 register source and destination operands.
1776 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1778 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1779 same thinko in "trap" opcode.
1781 * v850-opc.c (v850_opcodes): Add initializer for size field
1784 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1785 Add D8 for 8-bit unsigned field in short load/store insns.
1786 (IF4A, IF4D): These both need two registers.
1787 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1788 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1789 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1790 for "ldsr" and "stsr".
1791 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1794 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1795 short store word (sst.w).
1797 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1799 * v850-opc.c (v850_operands): Added insert and extract fields,
1800 pointers to functions that handle unusual operand encodings.
1802 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1804 * v850-opc.c (v850_opcodes): Enable "trap".
1806 * v850-opc.c (v850_opcodes): Fix order of displacement
1807 and register for "set1", "clr1", "not1", and "tst1".
1809 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1811 * v850-opc.c (v850_operands): Add "B3" support.
1812 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1815 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1817 * v850-opc.c: Close unterminated comment.
1819 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1821 * v850-opc.c (v850_operands): Add flags field.
1822 (v850_opcodes): add move opcodes.
1824 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1826 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1827 * configure: (bfd_v850v_arch) Add new case.
1828 * configure.in: (bfd_v850_arch) Add new case.
1829 * v850-opc.c: New file.
1831 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1833 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1835 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1837 * d10v-opc.c: Add additional information to the opcode
1838 table to help determinine which instructions can be done
1841 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1843 * mpw-make.sed: Update editing of include pathnames to be
1846 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1848 * arm-opc.h: Added "bx" instruction definition.
1850 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1852 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1854 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1856 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1858 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1860 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1862 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1864 * makefile.vms: Update for alpha-opc changes.
1866 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1868 * i386-dis.c (print_insn_i386): Actually return the correct value.
1869 (ONE, OP_ONE): #ifdef out; not used.
1871 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1873 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1874 Changed subi operand type to treat 0 as 16.
1876 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1878 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1881 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1883 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1884 memory transfer instructions. Add new format string entries %h and %s.
1885 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1888 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1890 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1891 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1893 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1895 * alpha-dis.c (print_insn_alpha_osf): Remove.
1896 (print_insn_alpha_vms): Remove.
1897 (print_insn_alpha): Make globally visible. Chose the register
1898 names based on info->flavour.
1899 * disassemble.c: Always return print_insn_alpha for the alpha.
1901 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1903 * d10v-dis.c (dis_long): Handle unknown opcodes.
1905 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1907 * d10v-opc.c: Changes to support signed and unsigned numbers.
1908 All instructions with the same name that have long and short forms
1909 now end in ".l" or ".s". Divs added.
1910 * d10v-dis.c: Changes to support signed and unsigned numbers.
1912 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1914 * d10v-dis.c: Change all functions to use info->print_address_func.
1916 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1918 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1919 move ccr/sr insns more strict so that the disassembler only
1920 selects them when the addressing mode is data register.
1922 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1923 * d10v-opc.c (pre_defined_registers): Declare.
1924 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1925 to pick a better name for the registers.
1927 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1929 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1930 operands for fexpand and fpmerge. From Christian Kuehnke
1931 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1933 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1935 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1936 print routine. Take new regnames and cpumask arguments.
1937 Kill the environment variable nonsense.
1938 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1939 (print_insn_alpha_vms): New function. Do VMS style regnames.
1940 * disassemble.c (disassembler): Test bfd flavour to pick
1941 between OSF and VMS routines. Default to OSF.
1943 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1945 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1946 * configure: Rebuild.
1947 * Makefile.in (install): Use @INSTALL_SHLIB@.
1949 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1951 * configure: (bfd_d10v_arch) Add new case.
1952 * configure.in: (bfd_d10v_arch) Add new case.
1953 * d10v-dis.c: New file.
1954 * d10v-opc.c: New file.
1955 * disassemble.c (disassembler) Add entry for d10v.
1957 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1959 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1960 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1962 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1964 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1965 distinguish between variants of the instruction set.
1966 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1967 distinguish between variants of the instruction set.
1969 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1971 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1972 the 8086 instruction set.
1973 * i386-dis.c: General cleanups. Make most things static. Add
1974 prototypes. Get rid of static variables aflags and dflags. Pass
1975 them as args (to almost everything).
1977 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1979 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1981 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1983 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1984 if the next arg is marked with SRC_IN_DST. Gross.
1986 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1987 we're looking for and find EXR.
1989 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1990 if we're looking for KBIT and we don't find it.
1992 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1995 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1996 3bit immediate operands.
1998 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2000 * Released binutils 2.7.
2002 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2003 <kkaempf@progis.ac-net.de>.
2005 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2007 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2009 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2011 * sparc-dis.c (print_insn_sparclite): New routine to print
2012 sparclite instructions.
2014 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2016 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2018 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2020 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2021 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2022 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2024 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2026 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2027 Use autoconf-set values.
2028 (docdir, oldincludedir): Removed.
2029 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2031 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2033 * alpha-opc.c: New file.
2034 * alpha-opc.h: Remove.
2035 * alpha-dis.c: Complete rewrite to use new opcode table.
2036 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2037 * configure: Rebuild with autoconf 2.10.
2038 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2039 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2041 (alpha-opc.o): New target.
2043 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2045 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2046 Set imm_added_to_rs1 even if the source and destination register
2049 * sparc-opc.c: Add some two operand forms of the wr instruction.
2051 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2053 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2056 * disassemble.c (disassembler): Handle H8/S.
2057 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2059 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2061 * sparc-opc.c: Add beq/teq as aliases for be/te.
2063 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2064 <sergei@msil.sps.mot.com>.
2066 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2068 * makefile.vms: New file.
2070 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2072 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2074 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2077 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2079 * i386-dis.c (OP_OFF): Call append_prefix.
2081 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2083 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2084 unsigned long to silence a warning from the Solaris PowerPC
2087 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2089 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2091 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2093 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2095 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2096 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2097 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2098 cpush, cpusha, cpull sparclet insns.
2100 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2102 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2104 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2106 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2107 Set F_FLOAT on other floating point instructions.
2109 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2111 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2113 (powerpc_opcodes): Add 860/821 specific SPRs.
2115 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2117 * configure.in: Permit --enable-shared to specify a list of
2118 directories. Set and substitute BFD_PICLIST.
2119 * configure: Rebuild.
2120 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2121 uses. Set to @BFD_PICLIST@.
2123 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2125 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2126 not "abs", which may be needed for the absolute in something
2127 like btst #0,@10:8. Print L_3 immediates separately from other
2128 immediates. Change ABSMOV reference to ABS8MEM.
2130 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2132 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2133 (current_arch_mask): New static global.
2134 (compute_arch_mask): New static function.
2135 (print_insn_sparc): Delete sparc_v9_p. New static local
2136 current_mach. Resort opcode table if current_mach changes.
2137 Generalize "insn not supported" test.
2138 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2139 Delete test for v9/!v9.
2140 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2142 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2143 (brfcx): Renamed to FBRX.
2144 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2145 coprocessor mnemonics are not supported on the sparclet).
2146 (condf): Renamed to CONDF.
2147 (SLCBCC2): Delete F_ALIAS flag.
2149 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2151 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2152 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2154 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2156 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2157 that the shared library version number is set correctly.
2159 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2161 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2162 Miles Bader <miles@gnu.ai.mit.edu>.
2163 * configure: Rebuild.
2165 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2167 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2170 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2172 * configure: Rebuild with autoconf 2.8.
2174 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2176 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2177 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2179 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2181 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2182 since they appear as targets in Makefile.in.
2183 * configure: Rebuild.
2185 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2187 * mpw-make.sed: Edit out shared library support bits.
2189 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2191 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2192 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2193 (sparc_opcodes): Add sparclet insns.
2194 (sparclet_cpreg_table): New static local.
2195 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2196 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2198 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2200 * i386-dis.c (index16): New static variable.
2201 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2203 (OP_indirE): Return result of OP_E.
2204 (OP_E): Check for 16 bit addressing mode, and disassemble
2205 correctly. Optimised 32 bit case a little. Don't print
2206 "(base,index,scale)" when sib specifies only an offset.
2208 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2210 * configure.in: Set and substitute SHLIB_DEP.
2211 * configure: Rebuild.
2212 * Makefile.in (SHLIB_DEP): New variable.
2213 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2214 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2215 COMMON_SHLIB, add them to piclist with appropriate modifications.
2216 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2217 here: just use piclist.
2219 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2221 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2222 (print_insn_sparc): Rewrite v9/not-v9 tests.
2223 (compare_opcodes): Likewise.
2224 * sparc-opc.c (MASK_<ARCH>): Define.
2225 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2226 (sparclet,v6notv9): Define.
2227 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2228 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2230 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2232 * configure.in: Call AC_PROG_CC before configure.host.
2233 * configure: Rebuild.
2235 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2237 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2239 * i386-dis.c (onebyte_has_modrm): New static array.
2240 (twobyte_has_modrm): New static array.
2241 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2243 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2245 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2248 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2250 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2253 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2255 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2256 m68010up, not just m68020up | cpu32.
2258 * Makefile.in (SONAME): New variable.
2259 ($(SHLINK)): Make a link to the transformed name, as well.
2260 (stamp-tshlink): New target.
2261 (install): Skip stamp-tshlink during install.
2263 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2265 * configure.in: Call AC_ARG_PROGRAM.
2266 * configure: Rebuild.
2267 * Makefile.in (program_transform_name): New variable.
2268 (install): Transform library name before installing it.
2270 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2272 * i960-dis.c (mem): Add HX dcinva instruction.
2274 Support for building as a shared library, based on patches from
2275 Alan Modra <alan@spri.levels.unisa.edu.au>:
2276 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2277 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2278 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2279 * configure: Rebuild.
2280 * Makefile.in (ALLLIBS): New variable.
2281 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2282 (COMMON_SHLIB, SHLINK): New variables.
2283 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2284 (STAGESTUFF): Remove variable.
2285 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2286 (stamp-piclist, piclist): New targets.
2287 ($(SHLIB), $(SHLINK)): New targets.
2288 ($(OFILES)): Depend upon stamp-picdir.
2289 (disassemble.o): Build twice if PICFLAG is set.
2290 (MOSTLYCLEAN): Add pic/*.o.
2291 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2292 (distclean): Remove pic and stamp-picdir.
2293 (install): Install shared libraries.
2294 (stamp-picdir): New target.
2296 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2298 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2299 Print unknown instruction as "unknown", rather than in hex.
2301 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2303 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2305 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2307 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2309 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2311 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2312 when necessary. From Ulrich Drepper
2313 <drepper@myware.rz.uni-karlsruhe.de>.
2315 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2317 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2318 sparc_num_opcodes. Update architecture enum values.
2319 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2320 (sparc_opcode_lookup_arch): New function.
2321 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2322 (sparc_opcodes): Add v9a shutdown insn.
2324 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2326 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2327 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2329 (print_insn_sparc64): Deleted.
2330 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2333 * sparc-opc.c (architecture_pname): Add v9a.
2335 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2337 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2338 incorrectly defined as 0x16 when it should be 0x15.
2339 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2340 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2341 excb (exception barrier) which is defined in the Alpha
2342 Architecture Handbook version 2.
2343 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2344 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2345 disassembled as or, for example.
2347 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2349 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2350 (_print_insn_mips): Change i from int to unsigned int.
2352 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2354 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2355 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2357 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2359 * i386-dis.c: Added Pentium Pro instructions.
2361 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2363 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2366 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2368 * sh-opc.h (sh_nibble_type): Added REG_B.
2369 (sh_arg_type): Added A_REG_B.
2370 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2372 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2374 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2376 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2378 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2380 * Makefile.in (distclean): Remove stamp-h. From Ronald
2381 F. Guilmette <rfg@monkeys.com>.
2383 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2385 From David Mosberger-Tang <davidm@azstarnet.com>:
2386 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2389 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2391 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2392 (sh_table): Added many SH3 opcodes.
2393 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2395 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2397 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2398 (subco,subco.): Mark this PPC, not PPCCOM.
2400 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2402 * configure: Rebuild with autoconf 2.7.
2404 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2406 * configure: Rebuild with autoconf 2.6.
2408 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2410 * configure.in: Sort list of architectures. Accept but do nothing
2411 for alliant, convex, pyramid, romp, and tahoe.
2413 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2415 * a29k-dis.c (print_special): Change num to unsigned int.
2417 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2419 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2422 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2424 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2425 * configure: Rebuilt.
2427 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2429 * configure.in: Add case for bfd_i860_arch.
2430 * configure: Rebuild.
2432 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2434 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2435 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2436 (NEXTDOUBLE): Likewise.
2437 (print_insn_m68k): Don't match fmoveml if there is more than one
2438 register in the list.
2439 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2441 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2443 * m68k-opc.c: Use #W rather than #w.
2444 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2446 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2448 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2449 and likewise for all the dbxx opcodes.
2451 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2453 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2455 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2457 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2458 the VR4100 specific instructions to the mips_opcodes structure.
2460 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2462 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2463 ugly Metrowerks bug in CW6, is fixed in CW7.
2465 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2467 * ppc-opc.c (whole file): Add flags for common/any support.
2469 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2471 * Makefile.in (BISON): Remove macro.
2472 (FLAGS_TO_PASS): Remove BISON.
2474 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2476 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2478 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2479 instructions that take no args by looking at the match mask.
2480 (print_insn_arg): Always print "%" before register names.
2481 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2482 [case '_']: Don't print "@#" before address.
2483 [case 'J']: Use "%s" as format string, not register name.
2484 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2486 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2488 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2491 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2493 From David Mosberger-Tang <davidm@azstarnet.com>
2495 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2496 (alpha_insn_set): added definitions for VAX floating point
2497 instructions (Unix compilers don't generate these, but handcoded
2498 assembly might still use them).
2500 * alpha-dis.c (print_insn_alpha): added support for disassembling
2501 the miscellaneous instructions in the Alpha instruction set.
2503 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2505 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2506 no longer create sysdep.h, sed ppc-opc.c to work around a
2507 serious Metrowerks C bug.
2508 * mpw-make.in: Remove.
2509 * mpw-make.sed: New file, used by mpw-configure to edit
2510 Makefile.in into an MPW makefile.
2512 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2514 * Makefile.in (maintainer-clean): New synonym for realclean.
2516 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2518 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2519 which use '0', '1', and '2' instead. Specify the proper size for
2520 a pmove immediate operand. Correct the pmovefd patterns to be
2521 moves to a register, not from a register.
2522 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2524 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2526 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2527 %psr, %wim, %tbr as F_NOTV9.
2529 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2531 * Makefile.in (Makefile): Just rebuild Makefile when running
2533 (config.h, stamp-h): New targets.
2534 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2535 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2536 rebuilding config.h.
2537 * configure: Rebuild.
2539 * mips-opc.c: Change unaligned loads and stores with "t,A"
2540 operands to use "t,A(b)".
2542 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2544 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2546 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2548 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2549 until 3 instead of until 2.
2551 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2553 * Makefile.in (ALL_CFLAGS): Define.
2554 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2555 (MOSTLYCLEAN): Add config.log.
2556 (distclean): Don't remove config.log.
2557 * configure.in: Substitute HDEFINES.
2558 * configure: Rebuild.
2560 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2562 * sh-opc.h (sh_arg_type): Add F_FR0.
2563 (sh_table, case fmac): Add F_FR0 as first argument.
2565 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2567 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2569 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2571 * sparc-dis.c: Remove all references to NO_V9.
2573 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2575 * aclocal.m4: Just include ../bfd/aclocal.m4.
2576 * configure: Rebuild.
2578 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2580 * sparc-dis.c (X_DISP19): Define.
2581 (print_insn, case 'G'): Use it.
2582 (print_insn, case 'L'): Sign extend displacement.
2584 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2586 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2587 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2588 host_makefile_frag or frags.
2589 * aclocal.m4: New file.
2590 * configure: Rebuild.
2591 * Makefile.in (INSTALL): Set to @INSTALL@.
2592 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2593 (INSTALL_DATA): Set to @INSTALL_DATA@.
2595 (AR_FLAGS): Set to rc rather than qc.
2596 (CC): Define as @CC@.
2597 (CFLAGS): Set to @CFLAGS@.
2598 (@host_makefile_frag@): Remove.
2599 (config.status): Remove dependency upon @frags@.
2601 * configure.in: ../bfd/config.bfd now just sets shell variables.
2602 Use them rather than looking through target Makefile fragments.
2603 * configure: Rebuild.
2605 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2607 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2609 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2611 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2612 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2615 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2616 (lookup_{name,value}): New functions.
2617 (prefetch_table): New static local.
2618 (sparc_{encode,decode}_prefetch): New functions.
2619 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2621 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2623 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2626 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2628 * sh-dis.c: Correct comment on first line of file.
2630 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2632 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2634 * sparc-opc.c (asi, membar): New static locals.
2635 (sparc_{encode,decode}_{asi,membar}): New functions.
2636 (sparc_opcodes, membar insn): Fix.
2637 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2638 Support decoding of membar masks.
2641 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2643 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2645 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2647 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2648 and likewise for the other branches. Add bhs as an alias for bcc,
2649 and likewise for the size variants. Add dbhs as an alias for
2652 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2654 * sh-opc.h (FP sts instructions): Update to match reality.
2656 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2658 * m68k-dis.c: (fpcr_names): Add % before all register names.
2659 (reg_names): Likewise.
2660 (print_insn_arg): Don't explicitly print % before register names.
2661 Add % before register names in static array names. In case 'r',
2662 print data registers as `@(Dn)', not `Dn@'. When printing a
2663 memory address, don't print @# before it.
2664 (print_indexed): Change base_disp and outer_disp from int to
2665 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2666 syntax. Sign extend 8 byte displacement correctly.
2667 (print_base): Print using MIT syntax. Print zpc when appropriate.
2668 Change parameter disp from int to bfd_vma.
2670 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2673 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2675 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2676 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2677 * sh-opc.h (sh_arg_type): Add new operand types.
2678 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2680 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2682 * Makefile.in (distclean): Remove generated file config.h.
2684 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2686 * Makefile.in (distclean): Remove generated file config.h.
2688 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2690 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2692 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2694 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2695 rather than numopcodes. Use m68k_opcodes rather than removed
2696 opcode function. Don't check F_ALIAS.
2697 (print_insn_arg): Change first parameter to be const char *.
2698 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2699 (m68k-opc.o): New target.
2700 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2701 * configure: Rebuild.
2703 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2705 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2706 (opcode_bits, opcode_hash_table): New variables.
2707 (opcodes_initialized): Renamed from opcodes_sorted.
2708 (build_hash_table): New function.
2709 (is_delayed_branch): Use hash table.
2710 (print_insn): Renamed from print_insn_sparc, made static.
2711 Build and use hash table. If !sparc64, ignore sparc64 insns,
2712 and vice-versa if sparc64.
2713 (print_insn_sparc, print_insn_sparc64): New functions.
2714 (compare_opcodes): Move sparc64 opcodes to end.
2715 Print commutative insns with constant second.
2716 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2718 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2720 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2721 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2722 avoids printing a delay slot in a delay slot.
2723 * sh-opc.h (sh_table): Fully bracket last entry.
2725 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2727 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2729 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2731 * configure.in: Get host_makefile_frag from ${srcdir}.
2733 * configure.in: Autoconfiscated. Check for string[s].h. Create
2734 config.h from config.in. Don't set up sysdep.h link.
2735 * sysdep.h: New file.
2736 * configure, config.in: New files, generated from configure.in.
2737 * Makefile.in: Updated to be processed autoconf-style.
2738 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2739 (Makefile): Depend on config.status.
2740 (config.status): New rule.
2741 * configure.bat: Update Makefile substitutions.
2743 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2745 * mips-opc.c (L1): Define.
2746 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2747 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2750 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2752 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2753 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2754 have multiple add units but only a single logical unit.
2756 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2757 shifted by 18, without any insertion or extraction function.
2758 (insert_cr, extract_cr): Remove.
2760 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2762 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2765 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2767 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2768 * sh-opc.h: Add copyright.
2770 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2772 * Makefile.in (crunch-m68k): Delete extra target accidentally
2773 checked in a while ago.
2775 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2777 * sh-opc.h (sh_table): Add SH3 support.
2779 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2781 * sh-opc.h: Added bsrf and braf.
2783 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2785 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2786 bogus [ls]fm{ea,fd} patterns.
2788 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2789 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2790 initialize it from memory. Make function static.
2791 (print_insn_{big,little}_arm): New functions.
2792 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2793 the correct endianness.
2795 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2797 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2800 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2802 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2803 17th, so that it builds again using GCC as the compiler.
2805 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2807 * mips-dis.c (print_insn_little_mips): Cast return value from
2808 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2809 expects an unsigned long, and that might be fewer words of
2810 argument storage (e.g., if bfd_vma is long long on a 32-bit
2812 (print_insn_big_mips): Likewise with bfd_getb32 value.
2813 (_print_insn_mips): Now static.
2815 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2817 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2818 gcc memory hog problem with initializer is fixed.
2820 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2822 Merge in support for Mac MPW as a host.
2823 (Old change descriptions retained for informational value.)
2825 * mpw-config.in (archname): Compute from the config.
2826 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2828 * mpw-config.in (target_arch): Compute from canonical target.
2829 (m68k, mips, powerpc, sparc): Add architectures.
2830 * mpw-make.in (disassemble.c.o): Add.
2831 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2833 * mpw-config.in (BFD_MACHINES): Set to a default value.
2834 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2836 * mpw-make.in (CSEARCH): Add extra-include to search path.
2838 * mpw-config.in (varargs.h): Don't create.
2839 (sysdep.h): Create using forward-include.
2840 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2842 * mpw-config.in: New file, MPW version of configure.in.
2843 * mpw-make.in: New file, MPW version of Makefile.in.
2845 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2847 * alpha-dis.c (print_insn_alpha): Put empty statement after
2850 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2852 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2853 (low_sign_extend): Likewise.
2854 (get_field): Delete unused function.
2855 (set_field, deposit_14, deposit_21): Likewise.
2857 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2859 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2862 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2864 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2866 * alpha-opc.h (OSF_ASMCODE): define
2867 print pal-code names as defined in App C of the
2868 Alpha Architecture Reference Manual
2870 * alpha-dis.c: cleaned up output
2871 print stylized code forms as defined in App A.4.3 of the
2872 Alpha Architecture Reference Manual
2874 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2876 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2878 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2881 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2883 * m68k-dis.c (opcode): New function. Returns address of opcode
2884 table entry given index, even if the opcode table was split to
2885 work around gcc bugs.
2886 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2888 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2889 (reg_names): Now const.
2890 (print_insn_arg): Arrays cacheFieldName and names now const.
2891 (print_indexed): Array scales now const.
2893 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2895 * ppc-opc.c: Sort recently added instructions by minor opcode
2896 number within major opcode number.
2898 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2900 * hppa-dis.c: Include libhppa.h.
2902 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2904 * mips-opc.c: Change dli to use M_DLI, and add dla.
2906 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2908 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2910 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2912 * mips-opc.c: Add r4650 mul instruction.
2914 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2916 * mips-opc.c: Add uld and usd macros for unaligned double load and
2919 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2921 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2922 mfdcr, mtdcr, icbt, iccci.
2924 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2926 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2927 signed char fields to shorts, more portable.
2929 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2931 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2932 char fields as signed chars, since they may have negative values.
2934 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2936 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2937 (mycroft@netbsd.org).
2939 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2941 From "Logg, Ed" <elogg@ea.com>:
2942 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2943 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2946 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2948 * ppc-opc.c: Changes based on patch from David Edelsohn
2949 <edelsohn@mhpcc.edu>.
2950 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2953 (insert_tbr): New static function.
2954 (extract_tbr): New static function.
2955 (XFXFXM_MASK, XFXM): Define.
2956 (XSPRBAT_MASK, XSPRG_MASK): Define.
2957 (powerpc_opcodes): Add instructions to access special registers by
2958 name. Add mtcr and mftbu.
2960 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2962 * mips-opc.c (P3): Define.
2963 (mips_opcodes): Add mad and madu.
2965 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2967 * configure.in: Add W65 support.
2968 * disassemble.c: Likewise.
2969 * w65-opc.h, w65-dis.c: New files.
2971 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2973 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2976 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2978 * mips-opc.c: Add dli as a synonym for li.
2980 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2982 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2983 print something for reserved opcode values, even if it won't
2986 * mips-dis.c (_print_insn_mips): When initializing, shift right
2987 and mask, to avoid sign extension problems on the Alpha.
2989 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2992 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2994 * sh-opc.h (mov.l gbr): Get direction right.
2995 * sh-dis.c (print_insn_shx): New function.
2996 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2997 print opcodes with right byte order.
2999 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3001 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3002 to avoid conflicts with getopt.
3004 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3006 * hppa-dis.c (print_insn_hppa): Read the instruction using
3007 bfd_getb32, so that it works on a little endian or 64 bit host.
3008 Remove unused local variable op.
3010 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3012 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3013 addu does not work correctly if -mips3.
3015 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3017 * a29k-dis.c (print_special): Add special register names defined
3018 on 29030, 29040 and 29050.
3019 (print_insn): Handle new operand type 'I'.
3021 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3023 * Makefile.in (INSTALL): Use top level install.sh script.
3025 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3027 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3028 that it works on a little endian host.
3030 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3032 * configure.in: Use ${config_shell} when running config.bfd.
3034 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3036 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3038 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3040 * a29k-dis.c (print_insn): Print the opcode.
3042 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3044 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3046 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3048 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3050 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3052 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3053 which store a value into memory.
3055 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3057 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3058 * arm-dis.c, arm-opc.h: New files.
3060 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3062 * Makefile.in (ns32k-dis.o): Add dependency.
3063 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3064 string, not as array of chars.
3066 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3068 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3070 * sparc-opc.c: Added sparclite extended FP operations, and
3071 versions of v9 impdep* instructions permitting specification of
3074 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3076 * i960-dis.c (reg_names): Now const.
3077 (struct sparse_tabent): New type, copied from array type in mem
3079 (ctrl): Local static array ctrl_tab now const.
3080 (cobr): Local static array cobr_tab now const.
3081 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3082 static variable mem_tab no longer explicitly initialized. Changed
3083 mem_init to const array of struct sparse_tabent.
3084 (reg): Local static variable reg_tab no longer explicitly
3085 initialized. Changed reg_init to const array of struct
3087 (ea): Local static array scale_tab now const.
3089 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3092 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3094 * configure.bat: the disassember needs to be enabled for
3095 "objdump -d" to work in djgpp.
3097 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3099 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3100 (invalid_float): Enabled general version, doesn't require running
3101 on ns32k host. Changed to take char* argument, and test for
3102 explicitly specified sizes, instead of using sizeof() on host CPU
3104 (INVALID_FLOAT): Cast first argument.
3105 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3106 list_P032, list_M032): Now const.
3107 (optlist, list_search): Made appropriate arguments now point to
3109 (print_insn_arg): Changed static array of one-character-string
3110 pointers into a static const array of characters; fixed sprintf
3111 statement accordingly.
3113 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3115 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3116 from distribution. A ns32k-dis.c from a previous distribution has
3117 been brought up to date and supports the new interface.
3119 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3121 * configure.in: add bfd_ns32k_arch target support.
3123 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3124 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3126 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3128 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3131 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3133 * h8300-dis.c, mips-dis.c: Don't use true and false.
3135 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3137 * configure.in: Change --with-targets to --enable-targets.
3139 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3141 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3142 opcodes to the first instruction with that opcode, to speed
3143 disassembly of large files. From ralphc@pyramid.com (Ralph
3146 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3148 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3150 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3152 * configure.bat: update to latest makefile.in
3154 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3156 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3157 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3158 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3159 slot insn is in a delay slot.
3160 * z8k-opc.h: (resflg): Fix patterns.
3161 * h8500-opc.h Fix CR insn patterns.
3163 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3165 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3166 "cmpl" before POWER versions, so that gas -many uses them.
3168 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3170 * disassemble.c: New file.
3171 * Makefile.in (OFILES): Add disassemble.o.
3172 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3173 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3174 binutils/configure.in.
3176 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3177 opcode being examined.
3179 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3181 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3182 (insert_ral, insert_ram, insert_ras): New functions.
3183 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3184 RAS for store with update.
3186 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3188 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3189 (edelsohn@npac.syr.edu).
3191 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3193 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3196 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3198 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3200 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3202 * ppc-opc.c (powerpc_operands): The signedp field has been
3203 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3204 instead. Add new operand SISIGNOPT.
3205 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3206 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3207 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3210 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3212 * i386-dis.c (struct private): Renamed to dis_private. `private'
3213 is a reserved word for dynix cc.
3215 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3217 * configure.in: Change error message to refer to bfd/config.bfd
3218 rather than bfd/configure.in.
3220 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3222 * ppc-opc.c: Define POWER2 as short alias flag.
3223 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3226 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3228 * i960-dis.c (print_insn_i960): Don't read a second word for
3229 opcodes 0, 1, 2 and 3.
3231 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3233 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3235 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3237 * m68881-ext.c: Removed; no longer used.
3238 * Makefile.in: Changed accordingly.
3240 * m68k-dis.c (ext_format_68881): Don't declare.
3241 (print_insn_m68k): If an instruction uses place 'i', it uses at
3242 least four fixed bytes.
3243 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3244 extended float, convert to double using floatformat_to_double, not
3245 ieee_extended_to_double, and fetch the data before converting it.
3247 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3249 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3250 davidj@ICSI.Berkeley.EDU (David Johnson).
3252 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3254 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3255 PowerPC uses bdnz[l][a].
3257 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3259 * dis-buf.c, i386-dis.c: Include sysdep.h.
3261 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3263 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3265 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3266 by Motorola PowerPC 601 with PPC_OPCODE_601.
3267 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3268 Disassemble Motorola PowerPC 601 instructions as well as normal
3269 PowerPC instructions.
3271 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3273 * i960-dis.c (reg, mem): Just use a static array instead of
3276 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3278 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3279 condition name index if this is for a negated condition.
3281 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3282 Floating point format for 'H' operand is backwards from normal
3283 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3284 operands (fmpyadd and fmpysub), handle bizarre register
3285 translation correctly for single precision format.
3287 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3288 or 'I' operands if the next format specifier is 'M' (fcmp
3289 condition completer).
3291 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3293 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3294 single number giving a bitmask for the MB and ME fields of an M
3295 form instruction. Change NB to accept 32, and turn it into 0;
3296 also turn 0 into 32 when disassembling. Seperated SH from NB.
3297 (insert_mbe, extract_mbe): New functions.
3298 (insert_nb, extract_nb): New functions.
3299 (SC_MASK): Mask out SA and LK bits.
3300 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3301 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3302 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3303 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3304 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3305 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3306 (powerpc_macros): Define table of macro definitions.
3307 (powerpc_num_macros): Define.
3309 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3310 if PPC_OPERAND_NEXT is set.
3312 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3314 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3315 char. Retrieve contents using bfd_getl32 instead of shifting.
3317 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3319 * ppc-opc.c: New file. Opcode table for PowerPC, including
3320 opcodes for POWER (RS/6000).
3321 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3322 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3323 (CFILES): Add ppc-dis.c.
3324 (ppc-dis.o, ppc-opc.o): New targets.
3325 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3327 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3329 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3330 No space before 'u', 'f', or 'N'.
3332 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3334 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3335 farther than we should.
3337 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3339 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3341 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3343 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3345 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3346 needs it, to prevent reading past the end of a section.
3348 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3350 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3351 Removed t,A case for la; always use t,A(b) case.
3353 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3355 From Ted Lemen <mellon@pepper.ncd.com>
3356 * mips-dis.c (print_insn_arg): Handle 'k'.
3357 * mips-opc.c: Make cache use k, not t.
3359 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3361 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3362 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3363 FLOAT_FORMAT_CODE to put out floating point register names.
3365 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3367 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3369 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3371 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3373 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3375 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3376 larger than 32. Moved dsxx32 variants first for disassembler.
3378 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3380 * z8kgen.c, z8k-opc.h: Add full lda information.
3382 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3384 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3385 movb instructions. Any necessary space will be emitted by
3386 the code to handle nullification completers.
3388 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3390 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3392 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3394 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3395 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3397 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3399 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3401 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3403 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3404 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3406 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3408 * m88k-dis.c (m88kdis): comment change. Remove space after
3410 (printop): handle new arg types DEC and XREG for m88110.
3412 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3414 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3415 type for absolute branch addresses. Delete special
3416 "ble" and "be" code in 'W' operand code.
3418 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3420 * mips-opc.c: Set hazard information correctly for branch
3421 likely instructions.
3423 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3425 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3426 info->fprintf_func for printing and info->print_address_func for
3429 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3431 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3433 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3435 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3436 Corrected second case of "b" for disassembler.
3438 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3440 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3441 to BFD swapping routines to correspond to BFD name changes.
3443 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3445 * mips-opc.c: Change div machine instruction to be z,s,t rather
3446 than s,t. Change div macro to be d,v,t rather than d,s,t.
3447 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3448 rem and remu which generates only the corresponding div
3449 instruction. This is for compatibility with the MIPS assembler,
3450 which only generates the simple machine instruction when an
3451 explicit destination of $0 is used.
3452 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3454 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3456 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3457 WR_31 hazard for bal, bgezal, bltzal.
3459 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3461 * hppa-dis.c (print_insn_hppa): Use print function
3462 from within the disassemble_info, not fprintf_filtered.
3464 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3466 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3467 Law, law@cs.utah.edu.)
3469 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3471 * mips-opc.c ("absu"): Removed.
3474 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3476 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3477 Changed hazard information to distinguish between memory load
3478 delays and coprocessor load delays.
3480 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3482 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3484 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3486 * configure.in: Don't pass cpu to config.bfd.
3488 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3490 * m88k-dis.c (m88kdis): Make class unsigned.
3492 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3494 * alpha-dis.c (print_insn_alpha): One branch format case was
3495 missing the instruction name.
3497 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3499 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3500 Add the arch-specific auxiliary files.
3501 (OFILES): Remove the arch-specific auxiliary files
3502 and use BFD_MACHINES instead of DIS_LIBS.
3503 * configure.in: Set BFD_MACHINES based on --with-targets option.
3505 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3507 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3510 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3512 * sparc-opc.c: Change CONST to const to deal with gcc
3513 -Dconst=__const -traditional.
3515 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3517 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3518 coprocessor instructions out of #if 0, and made them use new
3521 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3523 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3525 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3527 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3528 instruction, for use by the disassembler.
3530 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3531 hand-coded sign extensions that depended on 32-bit host ints.
3532 FIXME, we still depend on big-endian host bitfield ordering.
3533 (sparc_print_insn): Set the insn_info_valid field, and the
3534 other fields that describe the instruction being printed.
3536 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3538 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3539 `jmp' instead of just one of them.
3541 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3543 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3544 (fput_fp_reg_r): Renamed from fput_reg_r.
3545 (fput_fp_reg): New function.
3546 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3548 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3550 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3552 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3554 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3556 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3557 don't output a space.
3559 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3561 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3563 * mips-opc.c: New file, containing opcode table from
3564 ../include/opcode/mips.h.
3565 * Makefile.in: Add it.
3567 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3569 * m88k-dis.c: New file, moved in from gdb and changed to use the
3570 new dis-asm.h disassembler interface.
3571 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3572 (m88k-dis.o): New target.
3574 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3576 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3577 argument string const char * to correspond to opcode/mips.h.
3579 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3581 * mips-dis.c: Updated to account for name changes in new version
3583 * Makefile.in: Added header file dependencies.
3585 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3587 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3589 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3591 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3592 extend, rather than shifts.
3594 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3596 * Makefile.in: Undo 15 June change.
3598 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3600 * m68k-dis.c (print_insn_arg): Change return value to byte count
3602 * m68k-dis.c: Re-write to detect invalid operands before
3603 printing anything, so we can handle this the same way we
3604 handle invalid opcodes.
3606 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3608 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3610 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3612 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3615 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3617 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3619 * configure.in: Do make sysdep.h link.
3620 * Makefile.in: Search ../include. Don't search ../bfd.
3622 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3624 Changes from Jeff Law, law@cs.utah.edu:
3625 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3626 Do not print a space before the completers specified by
3629 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3631 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3632 defined, since gdb has been fixed.
3634 Changes from Jeff Law, law@cs.utah.edu:
3635 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3636 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3637 be a *disassemble_info, not a *FILE.
3638 * hppa-dis.c: Support 'd', '!', and 'a'.
3639 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3640 * hppa-dis.c: Delete cases which are no longer needed.
3642 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3644 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3646 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3648 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3651 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3653 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3654 * configure.in: No longer need to configure to get sysdep.h.
3656 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3658 * Patches from Jeffrey Law <law@cs.utah.edu>.
3659 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3660 templates for 1.1 FP computational instructions.
3662 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3664 * h8500-dis.c (print_insn_h8500): Address argument is type
3666 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3669 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3670 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3672 * sparc-dis.c (compare_opcodes): Move static declaration to
3675 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3677 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3678 instruction, remove unimp hack from 'l' argument.
3680 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3682 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3685 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3687 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3688 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3691 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3693 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3694 arrays of string pointers to 2-d arrays of chars, to save
3697 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3699 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3700 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3702 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3704 * hppa-dis.c: New file from Utah, adapted to new disassembler
3706 * Makefile.in: Include it.
3708 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3710 * sh-dis.c, sh-opc.h: New files.
3712 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3714 * alpha-dis.c, alpha-opc.h: New files.
3716 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3718 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3721 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3723 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3725 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3727 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3730 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3732 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3733 and double percent signs a few places.
3735 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3737 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3738 Use info->print_address_func not print_address.
3740 * dis-buf.c (generic_print_address): New function.
3742 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3744 * Makefile.in: Add sparc-dis.c.
3745 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3747 Add `add' instruction to the set that get checked
3748 for a preceding `sethi' in order to print an absolute address.
3749 * (print_insn): Disassembly prefers real instructions.
3750 (is_delayed_branch): Speed up.
3751 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3752 Still missing some float ops, and needs testing.
3753 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3754 F_ALIAS. Use printf, not fprintf, when not passing a file
3756 (compare_opcodes): Check that identical instructions have
3757 identical opcodes, complain otherwise.
3760 * Include reg_names.
3762 Use dis-asm.h/read_memory_func interface.
3764 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3766 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3767 deliberately return non-zero to setjmp from longjmp. Otherwise
3768 this code fails to compile.
3770 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3772 * m68k-dis.c: Fix prototype for fetch_arg().
3774 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3776 * dis-buf.c: New file, for new read_memory_func interface.
3777 Makefile.in (OFILES): Include it.
3778 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3779 Use new read_memory_func interface.
3781 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3783 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3784 * h8500-opc.h: Fix couple of opcodes.
3786 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3788 * Makefile.in: add dvi & installcheck targets
3790 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3792 * Makefile.in: Update for h8500-dis.c.
3794 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3796 * h8500-dis.c, h8500-opc.h: New files
3798 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3800 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3801 ../include/dis-asm.h.
3802 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3803 and ../gdb/m68k-pinsn.c).
3804 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3805 and ../gdb/i386-pinsn.c).
3806 * m68881-ext.c: New file. Moved definition of
3807 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3808 * Makefile.in: Adjust for new files.
3809 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3810 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3811 can be dis-assembled.
3813 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3815 * mips-dis.c (print_insn_arg): Now returns void.
3817 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3819 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3820 files that use the macros.
3822 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3824 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3825 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3826 (CFILES): Added mips-dis.c.
3828 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3830 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3831 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3833 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3835 * Makefile.in: Improve *clean rules.
3836 * configure.in: Allow a default host.
3838 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3840 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3841 files include other sysdep files
3843 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3845 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3847 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3849 * configure.in: For host support, use ../bfd/configure.host
3850 so it stays in sync with the ../bfd/hosts database.
3852 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3854 * configure.in: use cpu-vendor-os triple instead of nested cases
3856 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3858 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3859 *always* the wrong one.
3861 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3863 * z8kgen.c: added copyright info
3865 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3867 * z8k-dis.c (unparse_instr): prettier tabs
3868 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3870 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3872 * configure.in: Add ncr* configuration.
3873 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3874 picayune ANSI compilers happy.
3876 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3878 * configure.in (i386): Make i386 and i486 synonymous for now.
3879 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3881 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3883 * Makefile.in (install): Fix typo.
3885 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3887 * Makefile.in (make): Remove obsolete crud.
3888 (sparc-opc.o): Avoid Sun Make VPATH bug.
3890 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3892 * Makefile.in: since there are no SUBDIRS, remove rule and
3893 references of subdir_do.
3895 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3897 * Makefile.in (install): Get the library name right here too.
3898 Don't install bfd.h, since it's unrelated to this library. No
3899 subdirs to recurse into, either.
3900 (CFILES): The source file has a .c suffix, not .o.
3902 * sparc-opc.c: New file, moved from BFD.
3903 * Makefile.in (OFILES): Build it.
3905 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3907 * z8k-dis.c: fixed forward refferences of some declarations.
3909 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3911 * Makefile.in: get the name of the library right
3913 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3915 * z8k-dis.c: knows how to disassemble z8k stuff
3916 * z8k-opc.h: new file full of z8000 opcodes
3920 version-control: never