opcodes/ChangeLog

   1 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
   2
   3         * Makefile.in (distclean): Remove stamp-h.  From Ronald
   4         F. Guilmette <rfg@monkeys.com>.
   5
   6 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
   7
   8         From David Mosberger-Tang  <davidm@azstarnet.com>:
   9         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
  10         instruction.
  11
  12 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
  13
  14         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
  15         (sh_table): Added many SH3 opcodes.
  16         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
  17
  18 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  19
  20         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
  21         (subco,subco.): Mark this PPC, not PPCCOM.
  22
  23 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
  24
  25         * configure: Rebuild with autoconf 2.7.
  26
  27 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
  28
  29         * configure: Rebuild with autoconf 2.6.
  30
  31 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
  32
  33         * configure.in: Sort list of architectures.  Accept but do nothing
  34         for alliant, convex, pyramid, romp, and tahoe.
  35
  36 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
  37
  38         * a29k-dis.c (print_special): Change num to unsigned int.
  39
  40 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
  41
  42         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
  43         shifting it.
  44
  45 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
  46
  47         * configure.in: Call AC_CHECK_PROG to find and cache AR.
  48         * configure: Rebuilt.
  49
  50 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
  51
  52         * configure.in: Add case for bfd_i860_arch.
  53         * configure: Rebuild.
  54
  55 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
  56
  57         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
  58         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
  59         (NEXTDOUBLE): Likewise.
  60         (print_insn_m68k): Don't match fmoveml if there is more than one
  61         register in the list.
  62         (print_insn_arg): Handle a place of '8' for a type of 'L'.
  63
  64 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
  65
  66         * m68k-opc.c: Use #W rather than #w.
  67         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
  68
  69 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
  70
  71         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
  72         and likewise for all the dbxx opcodes.
  73
  74 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
  75
  76         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
  77
  78 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
  79
  80         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
  81         the VR4100 specific instructions to the mips_opcodes structure.
  82
  83 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
  84
  85         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
  86         ugly Metrowerks bug in CW6, is fixed in CW7.
  87
  88 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  89
  90         * ppc-opc.c (whole file): Add flags for common/any support.
  91
  92 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
  93
  94         * Makefile.in (BISON): Remove macro.
  95         (FLAGS_TO_PASS): Remove BISON.
  96
  97 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
  98
  99         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 100
 101         * m68k-dis.c (print_insn_m68k): Recognize all two-word
 102         instructions that take no args by looking at the match mask.
 103         (print_insn_arg): Always print "%" before register names.
 104         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
 105         [case '_']: Don't print "@#" before address.
 106         [case 'J']: Use "%s" as format string, not register name.
 107         [case 'B']: Treat place == 'C' like 'l' and 'L'.
 108
 109 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
 110
 111         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
 112         name correctly.
 113
 114 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
 115
 116         From David Mosberger-Tang  <davidm@azstarnet.com>
 117
 118         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
 119         (alpha_insn_set): added definitions for VAX floating point
 120         instructions (Unix compilers don't generate these, but handcoded
 121         assembly might still use them).
 122
 123         * alpha-dis.c (print_insn_alpha): added support for disassembling
 124         the miscellaneous instructions in the Alpha instruction set.
 125
 126 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
 127
 128         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
 129         no longer create sysdep.h, sed ppc-opc.c to work around a
 130         serious Metrowerks C bug.
 131         * mpw-make.in: Remove.
 132         * mpw-make.sed: New file, used by mpw-configure to edit
 133         Makefile.in into an MPW makefile.
 134
 135 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
 136
 137         * Makefile.in (maintainer-clean): New synonym for realclean.
 138
 139 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 140
 141         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
 142         which use '0', '1', and '2' instead.  Specify the proper size for
 143         a pmove immediate operand.  Correct the pmovefd patterns to be
 144         moves to a register, not from a register.
 145         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
 146
 147 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
 148
 149         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
 150         %psr, %wim, %tbr as F_NOTV9.
 151
 152 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
 153
 154         * Makefile.in (Makefile): Just rebuild Makefile when running
 155         config.status.
 156         (config.h, stamp-h): New targets.
 157         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
 158         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
 159         rebuilding config.h.
 160         * configure: Rebuild.
 161
 162         * mips-opc.c: Change unaligned loads and stores with "t,A"
 163         operands to use "t,A(b)".
 164
 165 start-sanitize-sh3e
 166 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 167
 168         * sh-dis.c (print_insn_shx): Add F_FR0 support.
 169
 170 end-sanitize-sh3e
 171 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 172
 173         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
 174         until 3 instead of until 2.
 175
 176 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 177
 178         * Makefile.in (ALL_CFLAGS): Define.
 179         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
 180         (MOSTLYCLEAN): Add config.log.
 181         (distclean): Don't remove config.log.
 182         * configure.in: Substitute HDEFINES.
 183         * configure: Rebuild.
 184
 185 start-sanitize-sh3e
 186 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 187
 188         * sh-opc.h (sh_arg_type): Add F_FR0.
 189         (sh_table, case fmac): Add F_FR0 as first argument.
 190
 191 end-sanitize-sh3e
 192 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 193
 194         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
 195
 196 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
 197
 198         * sparc-dis.c: Remove all references to NO_V9.
 199
 200 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
 201
 202         * aclocal.m4: Just include ../bfd/aclocal.m4.
 203         * configure: Rebuild.
 204
 205 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
 206
 207         * sparc-dis.c (X_DISP19): Define.
 208         (print_insn, case 'G'): Use it.
 209         (print_insn, case 'L'): Sign extend displacement.
 210
 211 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
 212
 213         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
 214         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
 215         host_makefile_frag or frags.
 216         * aclocal.m4: New file.
 217         * configure: Rebuild.
 218         * Makefile.in (INSTALL): Set to @INSTALL@.
 219         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
 220         (INSTALL_DATA): Set to @INSTALL_DATA@.
 221         (AR): Set to @AR@.
 222         (AR_FLAGS): Set to rc rather than qc.
 223         (CC): Define as @CC@.
 224         (CFLAGS): Set to @CFLAGS@.
 225         (@host_makefile_frag@): Remove.
 226         (config.status): Remove dependency upon @frags@.
 227
 228         * configure.in: ../bfd/config.bfd now just sets shell variables.
 229         Use them rather than looking through target Makefile fragments.
 230         * configure: Rebuild.
 231
 232 start-sanitize-sh3e
 233 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 234
 235         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 236
 237 end-sanitize-sh3e
 238 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 239
 240         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
 241         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
 242         sparc64 insns.
 243
 244         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
 245         (lookup_{name,value}): New functions.
 246         (prefetch_table): New static local.
 247         (sparc_{encode,decode}_prefetch): New functions.
 248         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 249
 250 start-sanitize-sh3e
 251 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 252
 253         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 254         instructions.
 255
 256 end-sanitize-sh3e
 257 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 258
 259         * sh-dis.c: Correct comment on first line of file.
 260
 261 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 262
 263         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 264
 265         * sparc-opc.c (asi, membar): New static locals.
 266         (sparc_{encode,decode}_{asi,membar}): New functions.
 267         (sparc_opcodes, membar insn): Fix.
 268         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 269         Support decoding of membar masks.
 270         (X_MEMBAR): Define.
 271
 272 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 273
 274         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 275
 276 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 277
 278         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 279         and likewise for the other branches.  Add bhs as an alias for bcc,
 280         and likewise for the size variants.  Add dbhs as an alias for
 281         dbcc.
 282
 283 start-sanitize-sh3e
 284 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 285
 286         * sh-opc.h (FP sts instructions): Update to match reality.
 287
 288 end-sanitize-sh3e
 289 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 290
 291         * m68k-dis.c: (fpcr_names): Add % before all register names.
 292         (reg_names): Likewise.
 293         (print_insn_arg): Don't explicitly print % before register names.
 294         Add % before register names in static array names.  In case 'r',
 295         print data registers as `@(Dn)', not `Dn@'.  When printing a
 296         memory address, don't print @# before it.
 297         (print_indexed): Change base_disp and outer_disp from int to
 298         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 299         syntax.  Sign extend 8 byte displacement correctly.
 300         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 301         Change parameter disp from int to bfd_vma.
 302
 303         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 304         for jsr.
 305
 306 start-sanitize-sh3e
 307 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 308
 309         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 310         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 311         * sh-opc.h (sh_arg_type): Add new operand types.
 312         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 313
 314 end-sanitize-sh3e
 315 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 316
 317         * Makefile.in (distclean): Remove generated file config.h.
 318
 319 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 320
 321         * Makefile.in (distclean): Remove generated file config.h.
 322
 323 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 324
 325         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 326         Clean up tables.
 327         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 328         (opcode): Remove.
 329         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 330         rather than numopcodes.  Use m68k_opcodes rather than removed
 331         opcode function.  Don't check F_ALIAS.
 332         (print_insn_arg): Change first parameter to be const char *.
 333         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 334         (m68k-opc.o): New target.
 335         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 336         * configure: Rebuild.
 337
 338 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 339
 340         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 341         (opcode_bits, opcode_hash_table): New variables.
 342         (opcodes_initialized): Renamed from opcodes_sorted.
 343         (build_hash_table): New function.
 344         (is_delayed_branch): Use hash table.
 345         (print_insn): Renamed from print_insn_sparc, made static.
 346         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 347         and vice-versa if sparc64.
 348         (print_insn_sparc, print_insn_sparc64): New functions.
 349         (compare_opcodes): Move sparc64 opcodes to end.
 350         Print commutative insns with constant second.
 351         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 352
 353 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 354
 355         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 356         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 357         avoids printing a delay slot in a delay slot.
 358         * sh-opc.h (sh_table): Fully bracket last entry.
 359
 360 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 361
 362         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 363
 364 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 365
 366         * configure.in: Get host_makefile_frag from ${srcdir}.
 367
 368         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 369         config.h from config.in.  Don't set up sysdep.h link.
 370         * sysdep.h: New file.
 371         * configure, config.in: New files, generated from configure.in.
 372         * Makefile.in: Updated to be processed autoconf-style.
 373         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 374         (Makefile): Depend on config.status.
 375         (config.status): New rule.
 376         * configure.bat: Update Makefile substitutions.
 377
 378 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 379
 380         * mips-opc.c (L1): Define.
 381         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 382         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 383         and wb.
 384
 385 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 386
 387         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 388         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 389         have multiple add units but only a single logical unit.
 390
 391         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 392         shifted by 18, without any insertion or extraction function.
 393         (insert_cr, extract_cr): Remove.
 394
 395 start-sanitize-arc
 396 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 397
 398         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 399
 400 end-sanitize-arc
 401 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 402
 403         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 404         register names.
 405
 406 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 407
 408         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 409         * sh-opc.h: Add copyright.
 410
 411 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 412
 413         * Makefile.in (crunch-m68k): Delete extra target accidentally
 414         checked in a while ago.
 415
 416 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 417
 418         * sh-opc.h (sh_table): Add SH3 support.
 419
 420 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 421
 422         * sh-opc.h: Added bsrf and braf.
 423
 424 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 425
 426         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 427         bogus [ls]fm{ea,fd} patterns.
 428
 429         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 430         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 431         initialize it from memory.  Make function static.
 432         (print_insn_{big,little}_arm): New functions.
 433         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 434         the correct endianness.
 435
 436 start-sanitize-arc
 437 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 438
 439         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 440         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 441 end-sanitize-arc
 442
 443 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 444
 445         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 446         enum list.
 447
 448 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 449
 450         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 451         17th, so that it builds again using GCC as the compiler.
 452
 453 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 454
 455         * mips-dis.c (print_insn_little_mips): Cast return value from
 456         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 457         expects an unsigned long, and that might be fewer words of
 458         argument storage (e.g., if bfd_vma is long long on a 32-bit
 459         machine).
 460         (print_insn_big_mips): Likewise with bfd_getb32 value.
 461         (_print_insn_mips): Now static.
 462
 463 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 464
 465         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 466         gcc memory hog problem with initializer is fixed.
 467
 468 start-sanitize-arc
 469 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 470
 471         * arc-opc.c (NULL): Define.
 472         (arc_operands, insn fields u,s): Delete.
 473         (arc_operands, insn fields a,b,c): Mark as signed.
 474         (arc_opcodes): No longer const, links computed at run-time.
 475         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 476         suffixes that affect the insn code.
 477         (arc_opcodes): Resort table to macros are first.
 478         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 479         (arc_opcodes, st [b] entry): Likewise.
 480         (arc_opcodes, st [b,d] entry): Fix mask, value.
 481         (arc_reg_names): Add entries for r29, r30, r31, r60.
 482         (opcode_map, icode_map): New static globals.
 483         (arc_opcode_init_tables): Initialize them.
 484         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 485         (insert_shimmoffset): Signal error if register present.
 486         Validate constant.
 487         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 488 end-sanitize-arc
 489
 490 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 491
 492         Merge in support for Mac MPW as a host.
 493         (Old change descriptions retained for informational value.)
 494
 495         * mpw-config.in (archname): Compute from the config.
 496         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 497
 498         * mpw-config.in (target_arch): Compute from canonical target.
 499         (m68k, mips, powerpc, sparc): Add architectures.
 500         * mpw-make.in (disassemble.c.o): Add.
 501         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 502
 503         * mpw-config.in (BFD_MACHINES): Set to a default value.
 504         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 505
 506         * mpw-make.in (CSEARCH): Add extra-include to search path.
 507
 508         * mpw-config.in (varargs.h): Don't create.
 509         (sysdep.h): Create using forward-include.
 510         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 511
 512         * mpw-config.in: New file, MPW version of configure.in.
 513         * mpw-make.in: New file, MPW version of Makefile.in.
 514
 515 start-sanitize-arc
 516 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 517
 518         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 519         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 520         (print_insn_*): Pass bfd mach number, not opcode version.
 521         * arc-opc.c (arc_get_opcode_mach): New function.
 522 end-sanitize-arc
 523
 524 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 525
 526         * alpha-dis.c (print_insn_alpha): Put empty statement after
 527         default label.
 528
 529 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 530
 531         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 532         (low_sign_extend): Likewise.
 533         (get_field): Delete unused function.
 534         (set_field, deposit_14, deposit_21): Likewise.
 535
 536 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 537
 538         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 539           (guy@netapp.com).
 540
 541 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 542
 543         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 544
 545         * alpha-opc.h (OSF_ASMCODE): define
 546         print pal-code names as defined in App C of the
 547         Alpha Architecture Reference Manual
 548
 549         * alpha-dis.c: cleaned up output
 550         print stylized code forms as defined in App A.4.3 of the
 551         Alpha Architecture Reference Manual
 552
 553 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 554
 555         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 556         `rfe'.
 557         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 558         'N', and 'M'.
 559
 560 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 561
 562         * m68k-dis.c (opcode): New function.  Returns address of opcode
 563         table entry given index, even if the opcode table was split to
 564         work around gcc bugs.
 565         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 566         directly.
 567         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 568         (reg_names): Now const.
 569         (print_insn_arg): Arrays cacheFieldName and names now const.
 570         (print_indexed): Array scales now const.
 571
 572 start-sanitize-arc
 573 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 574
 575         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 576         (print_insn_arc_{host,graphics,audio}): Likewise.
 577         (print_insn): Add prototype.
 578         (arc_get_disassembler): New arg `big_p'.  Return little or big
 579         print fn accordingly.
 580         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 581         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 582         (arc_opval_supported): Likewise.
 583         * disassemble.c (disassembler): Pass big endian flag to
 584         arc_get_disassembler.
 585 end-sanitize-arc
 586
 587 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 588
 589         * ppc-opc.c: Sort recently added instructions by minor opcode
 590         number within major opcode number.
 591
 592 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 593
 594         * hppa-dis.c: Include libhppa.h.
 595
 596 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 597
 598         * mips-opc.c: Change dli to use M_DLI, and add dla.
 599
 600 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 601
 602         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 603
 604 start-sanitize-arc
 605 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 606
 607         * arc-dis.c (arc_get_disassembler): Change argument to int,
 608         one of bfd_mach_arc_xxx.  All callers updated.
 609 end-sanitize-arc
 610
 611 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 612
 613         * mips-opc.c: Add r4650 mul instruction.
 614
 615 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 616
 617         * mips-opc.c: Add uld and usd macros for unaligned double load and
 618         store.
 619
 620 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 621
 622         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 623         mfdcr, mtdcr, icbt, iccci.
 624
 625 start-sanitize-arc
 626 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 627
 628         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 629         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 630         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 631         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 632         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 633         (insert_absaddr): New function.
 634
 635 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 636
 637         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 638         New argument `cpu', pass it to arc_opcode_init_tables.
 639         Document byte order dependencies.  Ignore unsupported insns.
 640         (arc_get_disassembler): New function.
 641         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 642         print_insn_arc_audio): New functions.
 643         * arc-opc.c (MULTSHIFT operand): Delete.
 644         (UNSIGNED, SATURATION): New operands.
 645         (mac, mul, mul64, mulu64): New insns.
 646         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 647         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 648         (host,graphics,audio extended and auxiliary regs): Define.
 649         (ss, sc, mh, ml): New suffixes.
 650         (arc_opcode_supported, arc_opval_supported): New functions.
 651         (insert_multshift, extract_multshift): Deleted.
 652         * disassemble.c (disassembler, case bfd_arch_arc): Call
 653         arc_get_disassembler to get disassembler routine.
 654 end-sanitize-arc
 655
 656 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 657
 658         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 659         signed char fields to shorts, more portable.
 660
 661 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 662
 663         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 664         char fields as signed chars, since they may have negative values.
 665
 666 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 667
 668         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 669           (mycroft@netbsd.org).
 670
 671 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 672
 673         From "Logg, Ed" <elogg@ea.com>:
 674         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 675         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 676         value.
 677
 678 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 679
 680         * ppc-opc.c: Changes based on patch from David Edelsohn
 681         <edelsohn@mhpcc.edu>.
 682         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 683         SPR.
 684         (FXM_MASK): Define.
 685         (insert_tbr): New static function.
 686         (extract_tbr): New static function.
 687         (XFXFXM_MASK, XFXM): Define.
 688         (XSPRBAT_MASK, XSPRG_MASK): Define.
 689         (powerpc_opcodes): Add instructions to access special registers by
 690         name.  Add mtcr and mftbu.
 691
 692 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 693
 694         * mips-opc.c (P3): Define.
 695         (mips_opcodes): Add mad and madu.
 696
 697 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 698
 699         * configure.in: Add W65 support.
 700         * disassemble.c: Likewise.
 701         * w65-opc.h, w65-dis.c: New files.
 702
 703 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 704
 705         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 706         immediates.
 707
 708 start-sanitize-arc
 709 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 710
 711         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 712         slot.
 713         * arc-opc.c (extract_reladdr): New function.
 714         (insert_reladdr): Store address right-shifted by 2.
 715 end-sanitize-arc
 716
 717 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 718
 719         * mips-opc.c: Add dli as a synonym for li.
 720
 721 start-sanitize-arc
 722 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 723
 724         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 725         All uses changed.
 726         (extraction fns): Insn argument now array of two words.  Return pointer
 727         to value's table entry.  All uses changed.
 728         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 729         (insert_multshift, extract_multshift): New fns.
 730         (arc_operands): Add support for cache bypass suffix.  Add support for
 731         predefined aux regs.  Modifier bits moved to flags field.
 732         (arc_opcodes): Likewise.
 733         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 734         New insn rlc.  Update to syntax in programmer's manual.
 735         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 736         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 737         bypass.
 738         (arc_opcode_init_tables): New argument to indicate cpu type.
 739         (insert_reg): Handle predefined aux regs.
 740         (extract_reg): Likewise.
 741         (lookup_register): New fn.
 742         * arc-dis.c (arc_condition_codes): Deleted.
 743         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 744         Clean up modifier handling.  Handle predefined aux regs.
 745 end-sanitize-arc
 746
 747 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 748
 749         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 750         print something for reserved opcode values, even if it won't
 751         assemble again.
 752
 753         * mips-dis.c (_print_insn_mips): When initializing, shift right
 754         and mask, to avoid sign extension problems on the Alpha.
 755
 756         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 757         control registers.
 758
 759 start-sanitize-arc
 760 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 761
 762         * configure.in: Add ARC support.
 763         * disassemble.c: Likewise.
 764         * arc-dis.c, arc-opc.c: New files.
 765 end-sanitize-arc
 766
 767 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 768
 769         * sh-opc.h (mov.l gbr): Get direction right.
 770         * sh-dis.c (print_insn_shx): New function.
 771         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 772         print opcodes with right byte order.
 773
 774 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 775
 776         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 777         to avoid conflicts with getopt.
 778
 779 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 780
 781         * hppa-dis.c (print_insn_hppa): Read the instruction using
 782         bfd_getb32, so that it works on a little endian or 64 bit host.
 783         Remove unused local variable op.
 784
 785 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 786
 787         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 788         addu does not work correctly if -mips3.
 789
 790 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 791
 792         * a29k-dis.c (print_special): Add special register names defined
 793         on 29030, 29040 and 29050.
 794         (print_insn): Handle new operand type 'I'.
 795
 796 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 797
 798         * Makefile.in (INSTALL): Use top level install.sh script.
 799
 800 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 801
 802         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 803         that it works on a little endian host.
 804
 805 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 806
 807         * configure.in: Use ${config_shell} when running config.bfd.
 808
 809 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 810
 811         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 812
 813 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 814
 815         * a29k-dis.c (print_insn): Print the opcode.
 816
 817 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 818
 819         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 820
 821 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 822
 823         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 824
 825 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 826
 827         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 828         which store a value into memory.
 829
 830 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 831
 832         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 833         * arm-dis.c, arm-opc.h: New files.
 834
 835 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 836
 837         * Makefile.in (ns32k-dis.o): Add dependency.
 838         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 839         string, not as array of chars.
 840
 841 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 842
 843         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 844
 845         * sparc-opc.c: Added sparclite extended FP operations, and
 846         versions of v9 impdep* instructions permitting specification of
 847         the OPF field.
 848
 849 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 850
 851         * i960-dis.c (reg_names): Now const.
 852         (struct sparse_tabent): New type, copied from array type in mem
 853         function.
 854         (ctrl): Local static array ctrl_tab now const.
 855         (cobr): Local static array cobr_tab now const.
 856         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 857         static variable mem_tab no longer explicitly initialized.  Changed
 858         mem_init to const array of struct sparse_tabent.
 859         (reg): Local static variable reg_tab no longer explicitly
 860         initialized.  Changed reg_init to const array of struct
 861         sparse_tabent.
 862         (ea): Local static array scale_tab now const.
 863
 864         start-sanitize-i960xl
 865         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 866         (REG_MAX): Updated.
 867         end-sanitize-i960xl
 868
 869 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 870
 871         * configure.bat: the disassember needs to be enabled for
 872         "objdump -d" to work in djgpp.
 873
 874 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 875
 876         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 877         (invalid_float): Enabled general version, doesn't require running
 878         on ns32k host.  Changed to take char* argument, and test for
 879         explicitly specified sizes, instead of using sizeof() on host CPU
 880         types.
 881         (INVALID_FLOAT): Cast first argument.
 882         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 883         list_P032, list_M032): Now const.
 884         (optlist, list_search): Made appropriate arguments now point to
 885         const.
 886         (print_insn_arg): Changed static array of one-character-string
 887         pointers into a static const array of characters; fixed sprintf
 888         statement accordingly.
 889
 890 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 891
 892         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 893         from distribution. A ns32k-dis.c from a previous distribution has
 894         been brought up to date and supports the new interface.
 895
 896         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 897
 898         * configure.in: add bfd_ns32k_arch target support.
 899
 900         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 901         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 902
 903 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 904
 905         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 906         disassembly right.
 907
 908 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 909
 910         * h8300-dis.c, mips-dis.c: Don't use true and false.
 911
 912 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 913
 914         * configure.in: Change --with-targets to --enable-targets.
 915
 916 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 917
 918         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 919         opcodes to the first instruction with that opcode, to speed
 920         disassembly of large files.  From ralphc@pyramid.com (Ralph
 921         Campbell).
 922
 923 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 924
 925         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 926
 927 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 928
 929         * configure.bat: update to latest makefile.in
 930
 931 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 932
 933         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 934         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 935         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 936         slot insn is in a delay slot.
 937         * z8k-opc.h: (resflg): Fix patterns.
 938         * h8500-opc.h Fix CR insn patterns.
 939
 940 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 941
 942         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 943         "cmpl" before POWER versions, so that gas -many uses them.
 944
 945 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 946
 947         * disassemble.c: New file.
 948         * Makefile.in (OFILES): Add disassemble.o.
 949         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 950         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 951         binutils/configure.in.
 952
 953         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 954         opcode being examined.
 955
 956 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 957
 958         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 959         (insert_ral, insert_ram, insert_ras): New functions.
 960         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 961         RAS for store with update.
 962
 963 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 964
 965         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 966         (edelsohn@npac.syr.edu).
 967
 968 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 969
 970         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 971         immediate argument.
 972
 973 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 974
 975         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 976
 977 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 978
 979         * ppc-opc.c (powerpc_operands): The signedp field has been
 980         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 981         instead.  Add new operand SISIGNOPT.
 982         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 983         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 984         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 985         than signedp field.
 986
 987 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 988
 989         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 990         is a reserved word for dynix cc.
 991
 992 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 993
 994         * configure.in: Change error message to refer to bfd/config.bfd
 995         rather than bfd/configure.in.
 996
 997 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
 998
 999         * ppc-opc.c: Define POWER2 as short alias flag.
1000         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1001         fsqrt.
1002
1003 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1004
1005         * i960-dis.c (print_insn_i960): Don't read a second word for
1006         opcodes 0, 1, 2 and 3.
1007
1008 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1009
1010         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1011
1012 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1013
1014         * m68881-ext.c: Removed; no longer used.
1015         * Makefile.in: Changed accordingly.
1016
1017         * m68k-dis.c (ext_format_68881): Don't declare.
1018         (print_insn_m68k): If an instruction uses place 'i', it uses at
1019         least four fixed bytes.
1020         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
1021         extended float, convert to double using floatformat_to_double, not
1022         ieee_extended_to_double, and fetch the data before converting it.
1023
1024 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1025
1026         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
1027         davidj@ICSI.Berkeley.EDU (David Johnson).
1028
1029 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1030
1031         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1032         PowerPC uses bdnz[l][a].
1033
1034 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1035
1036         * dis-buf.c, i386-dis.c:  Include sysdep.h.
1037
1038 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1039
1040         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1041
1042         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1043         by Motorola PowerPC 601 with PPC_OPCODE_601.
1044         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1045         Disassemble Motorola PowerPC 601 instructions as well as normal
1046         PowerPC instructions.
1047
1048 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1049
1050         * i960-dis.c (reg, mem): Just use a static array instead of
1051         calling xmalloc.
1052
1053 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1054
1055         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1056         condition name index if this is for a negated condition.
1057
1058         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1059         Floating point format for 'H' operand is backwards from normal
1060         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
1061         operands (fmpyadd and fmpysub), handle bizarre register
1062         translation correctly for single precision format.
1063
1064         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1065         or 'I' operands if the next format specifier is 'M' (fcmp
1066         condition completer).
1067
1068 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1069
1070         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1071         single number giving a bitmask for the MB and ME fields of an M
1072         form instruction.  Change NB to accept 32, and turn it into 0;
1073         also turn 0 into 32 when disassembling.  Seperated SH from NB.
1074         (insert_mbe, extract_mbe): New functions.
1075         (insert_nb, extract_nb): New functions.
1076         (SC_MASK): Mask out SA and LK bits.
1077         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1078         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
1079         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
1080         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1081         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1082         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
1083         (powerpc_macros): Define table of macro definitions.
1084         (powerpc_num_macros): Define.
1085
1086         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1087         if PPC_OPERAND_NEXT is set.
1088
1089 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1090
1091         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1092         char.  Retrieve contents using bfd_getl32 instead of shifting.
1093
1094 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1095
1096         * ppc-opc.c: New file.  Opcode table for PowerPC, including
1097         opcodes for POWER (RS/6000).
1098         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
1099         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1100         (CFILES): Add ppc-dis.c.
1101         (ppc-dis.o, ppc-opc.o): New targets.
1102         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1103
1104 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1105
1106         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1107         No space before 'u', 'f', or 'N'.
1108
1109 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
1110
1111         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1112         farther than we should.
1113
1114         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1115
1116 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1117
1118         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1119
1120 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1121
1122         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1123         needs it, to prevent reading past the end of a section.
1124
1125 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1126
1127         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1128         Removed t,A case for la; always use t,A(b) case.
1129
1130 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1131
1132         From Ted Lemen <mellon@pepper.ncd.com>
1133         * mips-dis.c (print_insn_arg): Handle 'k'.
1134         * mips-opc.c: Make cache use k, not t.
1135
1136 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1137
1138         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
1139         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1140         FLOAT_FORMAT_CODE to put out floating point register names.
1141
1142 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1143
1144         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1145
1146 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1147
1148         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1149
1150 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1151
1152         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1153         larger than 32.  Moved dsxx32 variants first for disassembler.
1154
1155 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1156
1157         * z8kgen.c, z8k-opc.h: Add full lda information.
1158
1159 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1160
1161         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1162         movb instructions.  Any necessary space will be emitted by
1163         the code to handle nullification completers.
1164
1165 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1166
1167         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1168
1169 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1170
1171         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1172         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1173
1174 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1175
1176         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1177
1178 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1179
1180         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1181         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1182
1183 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1184
1185         * m88k-dis.c (m88kdis): comment change.  Remove space after
1186           printing mnemonic.
1187           (printop): handle new arg types DEC and XREG for m88110.
1188
1189 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1190
1191         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1192         type for absolute branch addresses.  Delete special
1193         "ble" and "be" code in 'W' operand code.
1194
1195 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1196
1197         * mips-opc.c: Set hazard information correctly for branch
1198         likely instructions.
1199
1200 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1201
1202         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1203         info->fprintf_func for printing and info->print_address_func for
1204         address output.
1205
1206 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1207
1208         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1209
1210 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1211
1212         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1213         Corrected second case of "b" for disassembler.
1214
1215 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1216
1217         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1218         to BFD swapping routines to correspond to BFD name changes.
1219
1220 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1221
1222         * mips-opc.c: Change div machine instruction to be z,s,t rather
1223         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1224         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1225         rem and remu which generates only the corresponding div
1226         instruction.  This is for compatibility with the MIPS assembler,
1227         which only generates the simple machine instruction when an
1228         explicit destination of $0 is used.
1229         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1230
1231 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1232
1233         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1234         WR_31 hazard for bal, bgezal, bltzal.
1235
1236 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1237
1238         * hppa-dis.c (print_insn_hppa): Use print function
1239         from within the disassemble_info, not fprintf_filtered.
1240
1241 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1242
1243         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1244         Law, law@cs.utah.edu.)
1245
1246 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1247
1248         * mips-opc.c ("absu"): Removed.
1249         ("dabs"): Added.
1250
1251 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1252
1253         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1254         Changed hazard information to distinguish between memory load
1255         delays and coprocessor load delays.
1256
1257 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1258
1259         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1260
1261 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1262
1263         * configure.in: Don't pass cpu to config.bfd.
1264
1265 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1266
1267         * m88k-dis.c (m88kdis): Make class unsigned.
1268
1269 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1270
1271         * alpha-dis.c (print_insn_alpha): One branch format case was
1272         missing the instruction name.
1273
1274 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1275
1276         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1277         Add the arch-specific auxiliary files.
1278         (OFILES): Remove the arch-specific auxiliary files
1279         and use BFD_MACHINES instead of DIS_LIBS.
1280         * configure.in: Set BFD_MACHINES based on --with-targets option.
1281
1282 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1283
1284         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1285         for swc1.
1286
1287 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1288
1289         * sparc-opc.c: Change CONST to const to deal with gcc
1290         -Dconst=__const -traditional.
1291
1292 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1293
1294         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1295         coprocessor instructions out of #if 0, and made them use new
1296         argument type "C".
1297
1298 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1299
1300         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1301
1302 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1303
1304         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1305         instruction, for use by the disassembler.
1306
1307         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1308         hand-coded sign extensions that depended on 32-bit host ints.
1309         FIXME, we still depend on big-endian host bitfield ordering.
1310         (sparc_print_insn):  Set the insn_info_valid field, and the
1311         other fields that describe the instruction being printed.
1312
1313 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1314
1315         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1316         `jmp' instead of just one of them.
1317
1318 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1319
1320         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1321         (fput_fp_reg_r): Renamed from fput_reg_r.
1322         (fput_fp_reg): New function.
1323         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1324
1325         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1326
1327         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1328
1329 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1330
1331         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1332
1333         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1334         don't output a space.
1335
1336         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1337
1338 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1339
1340         * mips-opc.c: New file, containing opcode table from
1341         ../include/opcode/mips.h.
1342         * Makefile.in: Add it.
1343
1344 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1345
1346         * m88k-dis.c: New file, moved in from gdb and changed to use the
1347         new dis-asm.h disassembler interface.
1348         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1349         (m88k-dis.o): New target.
1350
1351 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1352
1353         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1354         argument string const char * to correspond to opcode/mips.h.
1355
1356 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1357
1358         * mips-dis.c: Updated to account for name changes in new version
1359         of opcode/mips.h.
1360         * Makefile.in: Added header file dependencies.
1361
1362 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1363
1364         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1365
1366 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1367
1368         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1369         extend, rather than shifts.
1370
1371 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1372
1373         * Makefile.in: Undo 15 June change.
1374
1375 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1376
1377         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1378         or error code.
1379         * m68k-dis.c:  Re-write to detect invalid operands before
1380         printing anything, so we can handle this the same way we
1381         handle invalid opcodes.
1382
1383 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1384
1385         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1386
1387 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1388
1389         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1390         header files.
1391
1392 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1393
1394         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1395
1396         * configure.in: Do make sysdep.h link.
1397         * Makefile.in: Search ../include.  Don't search ../bfd.
1398
1399 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1400
1401         Changes from Jeff Law, law@cs.utah.edu:
1402         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1403         Do not print a space before the completers specified by
1404         'a' and 'd'.
1405
1406 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1407
1408         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1409         defined, since gdb has been fixed.
1410
1411         Changes from Jeff Law, law@cs.utah.edu:
1412         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1413         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1414         be a *disassemble_info, not a *FILE.
1415         * hppa-dis.c: Support 'd', '!', and 'a'.
1416         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1417         * hppa-dis.c: Delete cases which are no longer needed.
1418
1419 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1420
1421         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1422
1423 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1424
1425         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1426         H8/300-H opcodes.
1427
1428 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1429
1430         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1431         * configure.in:  No longer need to configure to get sysdep.h.
1432
1433 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1434
1435         * Patches from Jeffrey Law <law@cs.utah.edu>.
1436         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1437         templates for 1.1 FP computational instructions.
1438
1439 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1440
1441         * h8500-dis.c (print_insn_h8500): Address argument is type
1442         bfd_vma.
1443         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1444         Ditto.
1445
1446         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1447         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1448
1449         * sparc-dis.c (compare_opcodes): Move static declaration to
1450         top-level.
1451
1452 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1453
1454         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1455         instruction, remove unimp hack from 'l' argument.
1456
1457 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1458
1459         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1460         happy.
1461
1462 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1463
1464         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1465         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1466         instructions.
1467
1468 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1469
1470         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1471         arrays of string pointers to 2-d arrays of chars, to save
1472         space.
1473
1474 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1475
1476         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1477         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1478
1479 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1480
1481         * hppa-dis.c: New file from Utah, adapted to new disassembler
1482         calling interface.
1483         * Makefile.in: Include it.
1484
1485 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1486
1487         * sh-dis.c, sh-opc.h: New files.
1488
1489 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1490
1491         * alpha-dis.c, alpha-opc.h: New files.
1492
1493 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1494
1495         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1496         value.
1497
1498 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1499
1500         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1501
1502 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1503
1504         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1505         const.
1506
1507 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1508
1509         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1510         and double percent signs a few places.
1511
1512         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1513
1514         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1515         Use info->print_address_func not print_address.
1516
1517         * dis-buf.c (generic_print_address): New function.
1518
1519 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1520
1521         * Makefile.in: Add sparc-dis.c.
1522         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1523         From GDB:
1524             Add `add' instruction to the set that get checked
1525             for a preceding `sethi' in order to print an absolute address.
1526             * (print_insn):  Disassembly prefers real instructions.
1527             (is_delayed_branch):  Speed up.
1528             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1529             Still missing some float ops, and needs testing.
1530             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1531             F_ALIAS.  Use printf, not fprintf, when not passing a file
1532             pointer...
1533             (compare_opcodes): Check that identical instructions have
1534             identical opcodes, complain otherwise.
1535         From binutils:
1536             * New 'm' arg.
1537             * Include reg_names.
1538         From neither:
1539             Use dis-asm.h/read_memory_func interface.
1540
1541 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1542
1543         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1544           deliberately return non-zero to setjmp from longjmp.  Otherwise
1545           this code fails to compile.
1546
1547 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1548
1549         * m68k-dis.c:  Fix prototype for fetch_arg().
1550
1551 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1552
1553         * dis-buf.c: New file, for new read_memory_func interface.
1554         Makefile.in (OFILES): Include it.
1555         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1556         Use new read_memory_func interface.
1557
1558 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1559
1560         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1561         * h8500-opc.h: Fix couple of opcodes.
1562
1563 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1564
1565         * Makefile.in: add dvi & installcheck targets
1566
1567 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1568
1569         * Makefile.in:  Update for h8500-dis.c.
1570
1571 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1572
1573         * h8500-dis.c, h8500-opc.h: New files
1574
1575 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1576
1577         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1578         ../include/dis-asm.h.
1579         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1580         and ../gdb/m68k-pinsn.c).
1581         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1582         and ../gdb/i386-pinsn.c).
1583         * m68881-ext.c:  New file.  Moved definition of
1584         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1585         * Makefile.in:  Adjust for new files.
1586         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1587         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1588         can be dis-assembled.
1589
1590 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1591
1592         * mips-dis.c (print_insn_arg): Now returns void.
1593
1594 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1595
1596         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1597         files that use the macros.
1598
1599 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1600
1601         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1602         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1603         (CFILES): Added mips-dis.c.
1604
1605 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1606
1607         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1608         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1609
1610 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1611
1612         * Makefile.in:  Improve *clean rules.
1613         * configure.in:  Allow a default host.
1614
1615 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1616
1617         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1618         files include other sysdep files
1619
1620 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1621
1622         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1623
1624 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1625
1626         * configure.in:  For host support, use ../bfd/configure.host
1627         so it stays in sync with the ../bfd/hosts database.
1628
1629 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1630
1631         * configure.in: use cpu-vendor-os triple instead of nested cases
1632
1633 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1634
1635         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1636         *always* the wrong one.
1637
1638 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1639
1640         * z8kgen.c: added copyright info
1641
1642 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1643
1644         * z8k-dis.c (unparse_instr): prettier tabs
1645         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1646
1647 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1648
1649         * configure.in:  Add ncr* configuration.
1650         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1651         picayune ANSI compilers happy.
1652
1653 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1654
1655         * configure.in (i386):  Make i386 and i486 synonymous for now.
1656         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1657
1658 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1659
1660         * Makefile.in (install): Fix typo.
1661
1662 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1663
1664         * Makefile.in (make):  Remove obsolete crud.
1665         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1666
1667 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1668
1669         * Makefile.in: since there are no SUBDIRS, remove rule and
1670         references of subdir_do.
1671
1672 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1673
1674         * Makefile.in (install): Get the library name right here too.
1675         Don't install bfd.h, since it's unrelated to this library.  No
1676         subdirs to recurse into, either.
1677         (CFILES): The source file has a .c suffix, not .o.
1678
1679         * sparc-opc.c: New file, moved from BFD.
1680         * Makefile.in (OFILES): Build it.
1681
1682 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1683
1684         * z8k-dis.c: fixed forward refferences of some declarations.
1685
1686 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1687
1688         * Makefile.in: get the name of the library right
1689
1690 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1691
1692         * z8k-dis.c: knows how to disassemble z8k stuff
1693         * z8k-opc.h: new file full of z8000 opcodes
1694
1695 \f
1696 Local Variables:
1697 version-control: never
1698 End: