1 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
3 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
4 and SHORT_B3b formats to use Rb instead of Ra.
6 Add FLAG_MUL16 to MUL2XH opcode.
8 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
9 to existing 1.1.1 parallelisation prohibition procedure.
11 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
13 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
14 * cgen-dis.in (extract_normal): Likewise.
15 * m32r-asm.c,m32r-dis.c: Regenerate.
18 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
20 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
24 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
26 * mips-opc.c (multu1): Add two operand variant for the r5900.
29 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
31 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
32 with a shift count of 0.
35 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
37 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
39 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
41 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
42 (_print_insn_mips): Likewise.
43 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
47 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
49 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
50 (cgen_hw_lookup_by_num): New function.
53 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
56 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
58 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
60 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
62 * sparc-dis.c (print_insn_sparc): Always fetch instructions
63 as big-endian on SPARClite.
66 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
68 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
70 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
74 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
76 * d30v-opc.c (pre_defined_register): Remove alias for r0.
79 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
81 * mips-opc.c (break): Added 20-bit single-operand break
82 instruction for R5900 only.
85 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
87 * po/Make-in (install-info): New target.
89 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
91 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
94 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
96 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
97 variety of ISA2 instructions to set bottom ten bits of trap code.
99 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
101 * Makefile.am (config.status): Add explicit target so that
102 config.status depends upon bfd/configure.in.
103 * Makefile.in: Rebuild.
105 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
107 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
108 instructions to set bottom ten bits of break code.
109 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
110 for above optional argument.
112 start-sanitize-cygnus
113 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
115 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
116 * m32r-opc.h: Regenerate.
119 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
121 * makefile.vms: Run dec c with /nodebug.
123 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
125 * Makefile.in: Rebuilt.
126 * Makefile.am: Regenerated dependencies with mkdep.
128 * opintl.h (_): Define as dgettext.
130 start-sanitize-cygnus
131 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
133 * configure.in: Add support for --enable-cgen-maint.
134 * Makefile.am (M32R_DEPS): New variable.
135 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
136 * aclocal.m4: Regenerate.
137 * Makefile.in: Regenerate.
138 * configure: Regenerate.
140 * Makefile.am (CGENFILES): Add minsn.scm.
143 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
145 * cgen-asm.c: Internationalised.
146 start-sanitize-cygnus
147 * cgen-asm.in: Internationalised.
148 * cgen-opc.in: Internationalised.
150 * m32r-asm.c: Internationalised.
151 * m32r-dis.c: Internationalised.
152 * m32r-opc.c: Internationalised.
154 * aclocal.m4: Regenerated.
155 * configure: Regenerated.
156 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
157 * Makefile.in: Rebuild.
158 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
159 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
161 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
163 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
165 * aclocal.m4, configure: Rebuild with current tools.
167 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
169 * opintl.h: New file - contains internationalisation macros used
170 by source files in this directory.
171 * po/: New subdirectory - contains internationalisation files.
172 * po/Make-in: New file - Makefile constructor.
173 * po/POTFILES.in: New file - list of files in opcodes directory
174 that should be scan for internationalisation macros.
175 * po/opcodes.pot: New file - list of internationisation strings
176 found in files mentioned in po/POTFILES.in.
177 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
178 entry. Add intl directory to include paths.
179 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
180 HAVE_STRCPY, HAVE_LC_MESSAGES
181 * configure.in: Add rule to build Makefile in po subdirectory.
182 * Makefile.in: Rebuilt.
183 * aclocal.m4: Rebuilt.
184 * config.in: Rebuilt.
185 * configure: Rebuilt.
186 * alpha-opc.c: Internationalised.
187 * arc-dis.c: Internationalised.
188 * arc-opc.c: Internationalised.
189 * arm-dis.c: Internationalised.
190 * cgen-asm.c: Internationalised.
192 * d30v-dis.c: Internationalised.
194 * dis-buf.c: Internationalised.
196 * dvp-dis.c: Internationalised.
197 * dvp-opc.c: Internationalised.
199 * h8300-dis.c: Internationalised.
200 * h8500-dis.c: Internationalised.
201 * i386-dis.c: Internationalised.
202 * m10200-dis.c: Internationalised.
203 * m10300-dis.c: Internationalised.
204 * m68k-dis.c: Internationalised.
205 * m88k-dis.c: Internationalised.
206 * mips-dis.c: Internationalised.
207 * ns32k-dis.c: Internationalised.
208 * opintl.h: Internationalised.
209 * ppc-opc.c: Internationalised.
210 * sparc-dis.c: Internationalised.
211 * v850-dis.c: Internationalised.
212 * v850-opc.c: Internationalised.
214 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
216 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
217 (asm_hash_table_entries): New variable.
218 (cgen_asm_init): Free asm_hash_table_entries.
219 (hash_insn_array,hash_insn_list): New functions.
220 (build_asm_hash_table): Use them. Hash macro insns as well.
221 (cgen_asm_lookup_insn): Update.
222 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
223 (dis_hash_table_entries): New variable.
224 (cgen_dis_init): Free dis_hash_table_entries.
225 (hash_insn_array,hash_insn_list): New functions.
226 (build_dis_hash_table): Use them. Hash macro insns as well.
227 (cgen_dis_lookup_insn): Update.
228 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
229 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
230 (cgen_macro_insn_count): New function.
231 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
232 All callers updated. Sanity check result of extract fn.
233 (@arch@_cgen_get_insn_operands): Change result type to void.
234 Delete args insn_value, length. New arg fields. All callers updated.
235 (@arch@_cgen_lookup_get_insn_operands): New function.
236 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
238 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
240 * i386-dis.c (OP_DSSI): Print segment override.
243 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
245 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
249 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
251 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
255 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
257 * vu0.h (vlqd, vlqi): Update per revised specs.
261 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
263 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
264 (vif_operands): Update.
265 (vif_get_unpackloc): Delete.
266 (state_vif_unpackloc{,_star_p}): Delete.
267 (dvp_opcode_init_parse): Update.
268 (vif_unpack_len_value): Avoid divide by zero.
272 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
274 * vu0.h: Specs changed for VCALLMSR bit pattern.
275 * mips-dis.c: (print_insn_arg) Matching change.
278 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
280 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
283 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
285 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
286 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
287 * configure.in: Define and substitute WIN32LDFLAGS and
289 * aclocal.m4: Rebuild with new libtool.
290 * configure, Makefile.in: Rebuild.
293 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
295 * vu0.h: Corrected bit pattern for VMAXI opcode.
298 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
300 * m32r-opc.c: Regenerate.
303 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
305 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
306 (dvp_expand_macro): Implement.
307 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
308 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
311 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
313 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
314 before trying to copy it.
315 * Makefile.in: Rebuild.
317 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
319 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
322 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
324 * m32r-opc.c: Fix bit patterns for SAT and SATB.
327 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
329 * ns32k-dis.c (bit_extract_simple): New function to extract bits
330 from an arbitrary valid buffer instead of fetching them on demand
332 (invalid_float): use bit_extract_simple() instead of bit_extract().
335 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
337 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
338 * m32r-opc.h: Add extra control registers.
341 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
343 From H.J. Lu <hjl@gnu.org>:
344 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
347 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
349 * Branched binutils 2.9.
352 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
354 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
355 disassembling last 4 bytes of a section.
358 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
360 Fix some gcc -Wall warnings:
361 * arc-dis.c (print_insn): Add casts to avoid warnings.
362 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
363 * d10v-dis.c (dis_long, dis_2_short): Likewise.
365 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
366 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
367 (parse_bc, parse_vfreg, parse_accdest): Likewise.
368 (parse_ffstreg, parse_vif_mode): Likewise.
370 * m10200-dis.c (disassemble): Likewise.
371 * m10300-dis.c (disassemble): Likewise.
372 * ns32k-dis.c (print_insn_ns32k): Likewise.
373 * ppc-opc.c (insert_ral, insert_ram): Likewise.
374 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
375 * cgen-opc.c (cgen_keyword_search_next): Likewise.
376 * d10v-dis.c (dis_long, dis_2_short): Likewise.
378 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
381 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
382 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
383 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
385 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
387 * tic80-dis.c (print_one_instruction): Likewise.
389 * w65-dis.c (print_operand): Likewise.
390 * z8k-dis.c (fetch_data): Likewise.
391 * a29k-dis.c: Add return type for find_byte_func_type.
392 * arc-opc.c: Include <stdio.h>. Remove declarations of
393 insert_multshift and extract_multshift.
395 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
397 (extract_value): Fully parenthesize expression.
400 * dvp-opc.c: Include <ctype.h>.
401 (print_sdest): Add default case to switch.
403 * h8500-dis.c (print_insn_h8500): Initialize local variables.
404 * h8500-opc.h (h8500_table): Fully bracket initializer.
405 * w65-opc.h (optable): Likewise.
406 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
407 * i386-dis.c (OP_E): Initialize local variables.
408 * m10200-dis.c (print_insn_mn10200): Likewise.
409 * mips-dis.c (print_insn_mips16): Likewise.
410 * sh-dis.c (print_insn_shx): Likewise.
411 * v850-dis.c (print_insn_v850): Likewise.
412 * ns32k-dis.c (print_insn_arg): Declare.
413 (get_displacement, invalid_float): Declare.
414 (list_search, sign_extend, flip_bytes): Declare return type.
415 (get_displacement): Likewise.
416 (print_insn_arg): Likewise. Make d int. Fix sprintf format
418 (print_insn_ns32k): Make i unsigned.
419 (invalid_float): Make static. Declare type of val.
420 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
421 on each for iteration.
422 * tic30-dis.c (get_indirect_operand): Likewise.
423 * z8k-dis.c (print_insn_z8001): Declare return type.
424 (print_insn_z8002): Likewise.
425 (unparse_instr): Fix sprintf format strings.
427 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
429 * mips-opc.c: Add "sync.l" and "sync.p".
432 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
434 * dvp-opc.c (extract_vif_datalen): Rewrite.
435 (vif_insn_len): Perform 0->max+1 conversion for direct length.
437 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
439 * dvp-dis.c (print_insn): Print unpack address in hex.
440 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
441 Don't skip over '*', just record it.
442 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
443 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
444 Don't skip over '*', just record it.
445 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
446 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
447 (vif_opcodes): Likewise.
448 (state_vif_{mpg,unpack}loc_star_p): New static locals.
449 (vif_macros,vif_macro_count): New globals.
450 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
451 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
452 (vif_get_wl_cl): New function.
453 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
456 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
458 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
459 default m68k variant to recognize.
461 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
462 (ctrl, cobr, mem, ea): Likewise.
463 (print_addr): Likewise. Remove cast.
464 (ea): Cast argument of print_addr to bfd_vma.
466 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
468 (cgen_parse_unsigned_integer): Likewise.
469 (cgen_parse_address): Likewise.
471 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
473 * i960-dis.c (ctrl): Add full braces to structure initialization.
474 (cobr, mem, reg): Likewise.
475 (ea): Correct parenthesization in expression.
477 * cgen-asm.c: Include <ctype.h>.
478 (build_asm_hash_table): Remove unused local variable i.
479 (cgen_parse_keyword): Add casts to avoid warnings.
481 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
482 symbol. Fix indentation.
483 (print_insn_little_arm): Likewise.
486 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
488 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
493 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
495 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
500 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
502 * dvp-opc.c (vif_operand_datalen_special): New global.
506 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
508 * vu0.h (vcallms): Use 'O' for call target operand.
509 * mips-dis.c (print_insn_arg): Handle 'O'.
512 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
514 * configure.in: Use AM_DISABLE_SHARED.
515 * aclocal.m4, configure: Rebuild with libtool 1.2.
518 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
520 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
525 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
527 These patches are courtesy of Jonathan Walton and Tony Thompson
528 (athompso@cambridge.arm.com).
530 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
533 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
534 both the offset and the label closest to the destination.
537 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
539 * vu0.h: New file with cop2/vu0 instructions.
540 * mips-opc.c: Include vu0.h.
541 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
543 (print_insn_mips): Do not emit a tab after an instruction if the
544 first arg is an instruction completer (&). If the next arg is an
545 escape character (%), then print the next arg verbatim.
546 * Makefile.am (mips-opc.lo): Depend on vu0.h
550 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
552 * dvp-opc.c (vif_opcodes): Add stcycl.
554 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
556 * dvp-dis.c (print_dma): Change length from 16 to 8.
559 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
561 * m32r-opc.h: Regenerate.
564 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
566 * dvp-opc.c (print_dest1): Print dest spec again.
567 (print_vfreg,print_accdest): Likewise.
568 (vif_unpack_len): Round result up to word boundary.
571 start-sanitize-vr4320
572 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
574 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
576 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
578 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
583 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
585 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
586 (print_insn): Do mask comparison on proper opcode word.
587 Print unsigned values in hex.
588 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
589 (parse_bc): Catch missing dest.
590 (parse_vfreg): Replace atoi call with strtol.
591 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
592 (parse_bcftreg,parse_ffstreg): Handle missing dest.
593 (extract_gif_eop): New function.
594 (gif_operands): Update eop entry.
595 (VGIFOP,VGIFNREGS): Fix calcs.
596 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
597 (gif_regs): Add entry for unused 11 case.
598 (print_gif_regs): Print empty list instead of nothing.
599 (extract_gif_nloop): Fix value calc.
600 (print_gif_nloop): Always print value, even if 0.
601 (insert_vif_wlcl,extract_vif_wlcl): New functions.
602 (vif_operands): Use them for wl,cl fields.
603 (state_vif_wl,state_vif_cl): New static locals.
604 (parse_vif_mode): Handle numeric args.
605 (vif_unpack_len_value,vif_unpack_len): New functions.
606 (vif_insn_len): Call vif_unpack_len.
609 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
611 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
613 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
615 * cgen-asm.in: Move insertion of generated routines to top of file.
616 (insert_normal): Add prototype. Delete `shift' arg.
617 * cgen-dis.in: Move insertion of generated routines to top of file.
618 (extract_normal): Add prototype. Delete `shift' arg.
619 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
620 (print_keyword): Add prototype. Fix type of `attrs' arg.
622 start-sanitize-vr4320
623 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
625 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
626 * mips-opc.c ("mac","dmac") : Added 4320 insns.
629 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
631 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
632 assume that info->symbols is non-empty.
634 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
636 * alpha-opc.c (cvtqs) There is no such thing.
637 (cvttq): Missing most of the /*d variants.
640 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
642 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
644 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
645 (r5900/msub.s): Takes three operands, not four. Fix opcode.
649 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
651 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
652 delayed branches or jumps.
656 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
658 * dvp-opc.c (vif_operands): Add unpack[u] support.
659 (vif_opcodes): Ditto.
660 (*_vif_imrubits): Renamed from *_vif_imrbits.
662 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
664 * dvp-dis.c (print_insn): Handle word number.
665 Handle mips address vs vu address.
666 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
667 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
668 ({insert,extract}_dma_addr): Fix word ofset.
669 ({insert,print}_gif_regs): Fix encode/decode.
672 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
674 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
676 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
677 * tic30-dis.c (print_branch): Likewise.
679 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
680 * dvp-dis.c (dvp_info_mach_type): New function.
681 (print_insn_dvp): Call it.
682 (print_vif): Return length of 4 if mpg or direct insn so following
683 insns get properly disabled.
684 (print_gif): Fix word order.
685 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
686 (gif_operands): Fix word order.
687 (gif_opcodes): Likewise.
688 ({insert,extract,print}_gif_regs): Likewise.
689 (gif_regs): Add new register number/name changes.
690 (dma_opcodes): Add dmarefe insn.
693 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
695 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
696 saved_symbol code as it is no longer needed.
698 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
700 * cgen-asm.c: Include symcat.h.
701 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
703 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
706 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
708 * dvp-opc.c (extra_dma_flags): Fix typos.
709 (dma_operands): Fix word numbers.
710 (dma_opcodes): Likewise.
711 ({insert,extract}_dma_flags): Likewise.
714 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
716 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
719 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
721 * dvp-dis.c (print_gif): Complete.
722 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
723 (state_gif_{nregs,regs,nloop}): New static locals.
725 (dvp_opcode_init_{parse,print}): Init gif state locals.
726 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
727 (vif_insn_len): Handle `unpack'.
728 ({insert,extract}_dma_flags): Complete.
732 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
734 * mips-opc.c (mula.s): Renamed from multa.s.
737 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
739 * m32r-opc.[ch]: Regenerate.
742 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
744 * dvp-opc.c (dma_operands): Rewrite.
745 (dma_operand_{count,addr}): New globals.
746 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
747 (insert_dma_addr): Insert value into insn.
748 (extract_dma_addr): Extract value from insn.
750 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
752 * dvp-dis.c (print_vu): Handle loi insns.
753 (print_insn): Likewise.
754 * dvp-opc.c (vu_lower_opcodes): Add "loi".
755 (vu_operands): Make LDEST1 a FAKE operand.
756 (parse_dest1): Allow elided argument.
757 (print_dest1): Don't print the argument.
759 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
761 * dvp-opc.c (parse_vfreg): Dest spec is optional.
762 (print_vfreg): Don't print dest spec.
763 (parse_accdest): Dest spec is optional.
764 (print_accdest): Don't print dest spec.
767 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
769 * Makefile.am (CGENFILES): Update.
770 * Makefile.in: Regenerate.
771 * cgen-asm.in (insert_normal): Result is error message now.
772 Validate value to be inserted.
773 (insert_insn_normal): Result is error message now.
774 (@arch@_cgen_assemble_insn): Update.
775 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
776 arguments. Don't perform validation here.
777 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
779 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
781 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
782 operand instance list.
783 * m32r-opc.c: Regenerate.
785 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
787 * Makefile.am (AUTOMAKE_OPTIONS): Define.
788 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
790 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
792 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
794 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
796 * configure.in: Get the version number from BFD.
797 * configure: Rebuild.
799 From H.J. Lu <hjl@gnu.org>:
800 * Makefile.am (libopcodes_la_LDFLAGS): Define.
801 * Makefile.in: Rebuild.
803 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
805 * m32r-opc.c: Regenerate.
806 * m32r-opc.h: Regenerate.
808 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
810 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
811 Ignore ALIAS insns if asked to.
812 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
813 * m32r-opc.c: Regenerate.
816 * dvp.opc.c: Nicely format opcode tables.
817 (vu_operands): New element UFLAGS.
818 (parse_uflags,print_uflags): New functions.
819 (vu_upper_opcodes): Add UFLAGS to all insns.
822 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
824 Fix rac to accept only a0:
825 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
826 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
827 Introduce OPERAND_GPR.
828 * d10v-dis.c (print_operand): Likewise.
830 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
832 * cgen-opc.in: New file.
833 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
834 * Makefile.am (CGENFILES): Add cgen-opc.in.
835 * Makefile.in: Regenerate.
837 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
838 (cgen_hw_lookup): Make result const.
840 * cgen-dis.in (*): Use PTR instead of void *.
841 (print_insn): Delete unused vars `i', `syntax'.
843 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
846 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
848 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
849 (vif_opcodes): Update renamed insns.
850 * dvp-dis.c (*): Likewise.
853 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
855 * configure, aclocal.m4: Rebuild with new libtool.
858 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
860 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
861 instructions use a PC relative branch, not absolute.
864 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
866 * configure.in: Set libtool_enable_shared rather than
867 libtool_shared. Remove diversion hack.
868 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
870 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
872 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
873 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
875 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
877 * tic30-dis.c: New file.
878 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
879 * configure.in: Handle bfd_tic30_arch.
880 * Makefile.am: Rebuild dependencies.
881 (CFILES): Add tic30-dis.c
882 (ALL_MACHINES): Add tic30-dis.lo.
883 * configure, Makefile.in: Rebuild.
886 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
888 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
889 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
890 macwhi-a and macwlo-a instructions.
894 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
896 * dvp-opc.c, fixed encoding of a bunch of instructions to
897 be consistent with the asmvu assembler (and inconsistent
898 with the specification).
900 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
902 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
903 in the opcode table. The pkemscalf instruction must come first.
905 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
907 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
910 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
912 * m32r-opc.h (HAVE_CPU_M32R): Define.
915 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
917 * dvp-dis.c, dvp-opc.c: New files.
918 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
919 * configure: Regenerate.
920 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
921 (dvp-dis.lo,dvp-opc.lo): Add rules for.
922 (mips-dis.lo): Compile with @archdefs@.
923 * Makefile.in: Regenerate.
924 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
925 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
928 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
930 * v850-opc.c (insertion routines): If both alignment and size is
931 wrong then report this.
933 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
935 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
936 Only recognize instructions for the current target_processor.
938 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
940 * d10v-dis.c (PC_MASK): Correct value.
941 (print_operand): If there's a reloc, don't calculate the
942 address because they could be in different sections.
944 start-sanitize-cygnus
945 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
947 * cgen.sh: Rewrite to be like simulator's version.
948 * Makefile.am (cgen): Update call to cgen.sh.
949 * Makefile.in: Regenerate
952 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
954 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
955 instruction after the 4650's "mul" instruction; nobody's using the
956 4010 these days. If object files someday indicate which processor
957 variant they're intended for, we can do a better job at this.
960 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
962 * mips-opc.c (c.lt.s): Add r5900 variant.
966 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
968 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
969 table provided entry size. Use CGEN_INSN_MNEMONIC.
970 (cgen_parse_keyword): Rewrite.
971 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
972 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
973 * cgen-opc.c: Clean up pass over `struct foo' usage.
974 (cgen_keyword_lookup_value): Handle "" entry.
975 (cgen_keyword_add): Likewise.
976 start-sanitize-cygnus
977 * Makefile.am: Add cgen support.
978 * Makefile.in: Regenerate.
979 * configure.in: Add cgen support.
980 * configure: Regenerate.
981 * aclocal.m4: Regenerate.
982 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
985 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
987 * mips-opc.c: Add FP_D to s.d instruction flags.
989 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
991 * m68k-opc.c (halt, pulse): Enable them on the 68060.
994 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
996 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
997 PC relative offset forms before the 15 bit forms. An assembler command
998 line option now chooses the default.
1001 start-sanitize-r5900
1002 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1004 * mips-opc.c: Add many missing r5900 instructions.
1008 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1010 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1011 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1014 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1016 * configure: Only build libopcodes shared if --enable-shared's value
1017 was `yes', or was set to `*opcodes*'.
1018 * aclocal.m4: Likewise.
1019 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1020 original source of this bit of code. It's not clear what the best fix
1023 start-sanitize-r5900
1024 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1026 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1028 start-sanitize-tic80
1029 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1031 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1032 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1033 offset forms before the 15 bit forms, to default to the long forms.
1036 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1038 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1040 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1042 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1043 symbol if none is present.
1044 (print_insn_big_arm): Prevent examination of stored symbol if
1047 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1049 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1051 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1053 * disassemble.c: Remove disasm_symaddr() function.
1055 * arm-dis.c: Use info->symbol instead of info->flags to determine
1056 if disassmbly should be in Thumb or Arm mode.
1058 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1060 * arm-dis.c: Add support for disassembling Thumb opcodes.
1061 (print_insn_thumb): New function.
1063 * disassemble.c (disasm_symaddr): New function.
1065 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1066 (thumb_opcodes): Table of Thumb opcodes.
1068 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1070 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1072 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1073 and 'v' as operand types.
1075 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1077 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1078 <olivier.carmona@di.epfl.ch>.
1079 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1080 which has a two word opcode with a one word argument.
1083 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1085 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1086 unsigned, not signed.
1087 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1090 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1092 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1093 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1094 (ftrv): Slay the cut-and-paste monster.
1096 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1098 * d10v-dis.c (print_operand):
1099 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1101 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1103 * d10v-opc.c (OPERAND_FLAG): Split into:
1104 (OPERAND_FFLAG, OPERAND_CFLAG) .
1108 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1110 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1111 field for all INSN_MACRO's.
1112 * mips16-opc.c: same
1114 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1116 * mips-opc.c (sync,cache): These are 3900 insns.
1118 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1120 sh-opc.h (sh_table): Remove ftst/nan.
1122 start-sanitize-vr5400
1123 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1125 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1126 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1128 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1132 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1134 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1135 Add tx49 insns and configury.
1138 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1140 * mips-opc.c (ffc, ffs): Fix mask.
1143 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1145 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1149 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1151 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1152 start-sanitize-vr5400
1153 Added VR5400 instructions.
1154 (N5): New cpu-id macro.
1156 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1158 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1160 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1161 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1163 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1165 * v850-dis.c (disassemble): Replace // with /* ... */
1167 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1169 * sparc-opc.c: Add wr & rd for v9a asr's.
1170 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1171 (v9a_asr_reg_names): New variable.
1172 Patch from David Miller <davem@vger.rutgers.edu>.
1174 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1176 * sparc-opc.c (v9notv9a): New insn type.
1177 (IMPDEP): Move to the end to not conflict with edge8 et al.
1178 Patch from David Miller <davem@vger.rutgers.edu>.
1180 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1182 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1184 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1186 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1188 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1190 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1191 of disassemble_info structure to determine if an overlay address
1192 has a matching symbol in low memory.
1194 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1195 new symbol_at_address_func field in disassemble_info structure.
1197 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1199 * v850-opc.c (extract_d22): Use signed arithmatic.
1201 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1203 * mips-opc.c: Three op mult is not an ISA insn.
1205 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1207 * mips-opc.c: Fix formatting.
1209 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1211 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1212 than assuming that char is signed. Explicitly sign extend 16 bit
1213 values, rather than assuming that short is 16 bits.
1214 (OP_sI, OP_J, OP_DIR): Likewise.
1216 start-sanitize-v850e
1217 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1219 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1223 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1225 * v850-opc.c: Fix typo in comment.
1227 * v850-dis.c (disassemble): Add test of processor type when
1228 determining opcodes.
1230 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1232 * configure.in: Use a diversion to set enable_shared before the
1233 arguments are parsed.
1234 * configure: Rebuild.
1236 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1238 * m68k-opc.c (TBL1): Use ! rather than `.
1239 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1241 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1243 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1245 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1247 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1250 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1251 * aclocal.m4: Rebuild with new libtool.
1252 * configure: Rebuild.
1254 start-sanitize-v850e
1255 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1257 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1260 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1262 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1264 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1266 * v850-opc.c (v850_opcodes): Further rearrangements.
1269 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1271 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1274 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1276 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1279 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1281 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1283 * mips16-opc.c: Added mips16 sdbbp.
1286 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1288 * v850-opc.c: Initialise processors field of v850_opcode structure.
1291 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1293 Merge changes from Martin Hunt:
1295 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1297 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1298 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1299 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1301 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1303 * d30v-dis.c (print_insn): First operand of d*i (delayed
1304 branch) instructions is relative.
1306 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1307 (d30v_operand_table): Add IMM6S3 type.
1308 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1310 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1311 and cmp instructions.
1313 * d30v-opc.c: Correct entries for repeat*, and sat*.
1314 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1315 types. Correct several formats.
1317 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1319 * d30v-opc.c (pre_defined_registers): Change control registers.
1321 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1322 SHORT_C2. Manual was incorrect.
1324 * d30v-dis.c (lookup_opcode): Return value now indicates
1325 if an opcode has a short and a long form. Used for deciding
1326 to append a ".s" or ".l".
1327 (print_insn): Append a ".s" to an instruction if it is
1328 the short form and ".l" if it is a long form. Do not append
1329 anything if the instruction has only one possible size.
1331 * d30v-opc.c: Change mulx2h to require an even register.
1332 New form: SHORT_A2; a SHORT_A form that needs an even
1333 register as the first operand.
1335 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1336 instruction was not being disassembled if there were an odd
1337 number of instructions.
1339 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1342 start-sanitize-v850e
1343 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1345 * v850-dis.c (disassemble): Improved display of register lists.
1348 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1350 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1351 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1352 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1353 fandnot1s, fandnot2s.
1355 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1357 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1359 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1361 * cgen-asm.c (cgen_parse_address): New argument resultp.
1362 All callers updated.
1363 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1365 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1367 * mn10200-dis.c (disassemble): PC relative instructions are
1368 relative to the next instruction, not the current instruction.
1370 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1372 * v850-dis.c (disassemble): Only signed extend values that are not
1373 returned by extract functions.
1374 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1376 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1378 * v850-opc.c: Update comments. Remove use of
1379 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1381 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1383 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1385 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1387 * configure: Rebuilt with latest devo autoconf for NT support.
1389 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1391 * v850-dis.c (disassemble): Use curly brace syntax for register
1394 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1395 where r0 is being used as a destination register.
1397 start-sanitize-v850e
1398 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1400 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1403 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1405 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1406 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1407 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1408 Add insns to access SGR and DBR.
1409 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1411 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1413 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1415 start-sanitize-v850e
1416 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1418 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1419 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1422 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1424 * configure (cgen_files): Add support for v850e target.
1425 * configure.in (cgen_files): Add support for v850e target.
1427 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1429 * configure (cgen_files): Add support for v850ea target.
1430 * configure.in (cgen_files): Add support for v850ea target.
1433 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1435 * configure.in (bfd_arc_arch): Add.
1436 * configure: Rebuild.
1437 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1438 * Makefile.in: Rebuild.
1439 * arc-dis.c, arc-opc.c: New files.
1440 * disassemble.c (ARCH_all): Define ARCH_arc.
1441 (disassembler): Add ARC support.
1443 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1445 start-sanitize-v850e
1446 * v850-dis.c (disassemble): Add support for v850EA instructions.
1448 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1449 (v850_opcodes): Add v850EA instructions.
1451 * v850-dis.c (disassemble): Add support for v850E instructions.
1453 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1454 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1455 insert_spe, extract_spe): New Functions.
1456 (v850_opcodes): Add v850E instructions.
1459 * v850-opc.c: Reorganised and re-layed out to improve readability
1462 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1464 * configure: Rebuild with autoconf 2.12.1.
1466 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1468 * aclocal.m4, configure: Rebuild with new automake patches.
1470 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1472 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1473 * acinclude.m4: Just include acinclude.m4 from BFD.
1474 * aclocal.m4, configure: Rebuild.
1476 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1478 * Makefile.am: New file, based on old Makefile.in.
1479 * acconfig.h: New file.
1480 * acinclude.m4: New file.
1481 * stamp-h.in: New file.
1482 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1483 Removed shared library handling; now handled by libtool. Replace
1484 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1485 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1486 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1487 handling in AC_OUTPUT.
1488 * dep-in.sed: Change .o to .lo.
1489 * Makefile.in: Now built with automake.
1490 * aclocal.m4: Now built with aclocal.
1491 * config.in, configure: Rebuild.
1493 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1495 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1497 start-sanitize-r5900
1498 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1500 * mips-opc.c: Fix coding of mtsa.
1503 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1505 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1507 * sparc-dis.c (sorted_opcodes): New static local.
1508 (struct opcode_hash): `opcode' is pointer to const element.
1509 (build_hash): First arg is now table of sorted pointers.
1510 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1511 (compare_opcodes): Update.
1513 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1515 * cgen-opc.c: #include <ctype.h>.
1516 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1517 Handle case insensitive hashing.
1518 (hash_keyword_value): Change type of `value' to unsigned int.
1520 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1522 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1523 precision FP, mark it as such. Likewise for double precision
1524 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1526 start-sanitize-r5900
1527 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1530 start-sanitize-r5900
1531 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1533 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1534 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1537 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1539 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1541 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1542 nesting depth when all the macros are expanded.
1544 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1546 * sparc-opc.c: The fcmp v9a instructions take an integer register
1547 as a destination, not a floating point register. From Christian
1548 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1550 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1552 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1553 syntax. From Roman Hodek
1554 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1556 * i386-dis.c (twobyte_has_modrm): Fix pand.
1558 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1560 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1562 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1564 * arm-dis.c: Add prototypes for arm_decode_shift and
1567 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1569 * mips-opc.c: Add r3900 insns.
1571 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1573 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1574 print delay slot instructions on the same line. When using a PC
1575 relative load, add a comment with the value being loaded if it can
1578 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1580 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1581 to pushS/popS for segment regs and byte constant so that
1582 pushw/popw printed when in 16 bit data mode.
1584 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1585 print cbtw, cwtd in 16 bit data mode.
1586 * i386-dis.c (putop): extra case W to support above.
1588 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1589 address size prefix in 16 bit address mode.
1591 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1593 * sh-dis.c: Reindent. Rename local variable fprintf to
1596 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1598 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1600 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1602 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1604 * mips16-opc.c (mip16_opcodes): same.
1606 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1608 * m68k-opc.c (moveb): Change $d to %d.
1610 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1612 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1613 (twobyte_has_modrm): Likewise.
1615 (OP_MMX, OP_EM, OP_MS): New static functions.
1617 * i386-dis.c: Revert patch of April 4. The output now matches
1620 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1622 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1625 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1627 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1629 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1631 * Makefile.in (install): Depend upon installdirs.
1632 (installdirs): New target.
1634 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1636 From Thomas Graichen <graichen@rzpd.de>:
1637 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1638 * configure: Rebuild.
1640 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1642 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1643 Delete string{,s}.h support.
1645 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1647 * cgen-asm.c (cgen_parse_operand_fn): New global.
1648 (cgen_parse_{{,un}signed_integer,address}): Update call to
1649 cgen_parse_operand_fn.
1650 (cgen_init_parse_operand): New function.
1651 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1652 from cgen_asm_init_parse.
1653 (m32r_cgen_assemble_insn): New operand `errmsg'.
1654 Delete call to as_bad, return error message to caller.
1655 (m32r_cgen_asm_hash_keywords): #if 0 out.
1657 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1659 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1661 [case 'J']: Fix typo in register name.
1663 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1665 * configure.in: Substitute SHLIB_LIBS.
1666 * configure: Rebuild.
1667 * Makefile.in (SHLIB_LIBS): New variable.
1668 ($(SHLIB)): Use $(SHLIB_LIBS).
1670 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1672 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1674 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1676 * disassemble.c (disassembler): Handle m32r.
1678 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1680 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1681 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1682 * Makefile.in (CFILES): Add them.
1683 (ALL_MACHINES): Add them.
1684 (dependencies): Regenerate.
1685 * configure.in (cgen_files): New variable.
1686 (bfd_m32r_arch): Add entry.
1687 * configure: Regenerate.
1689 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1691 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1692 * configure: Rebuild.
1694 * Makefile.in: Rebuild dependencies.
1696 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1698 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1701 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1703 * Branched binutils 2.8.
1705 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1707 * m10200-dis.c: Rename from mn10200-dis.c.
1708 * m10200-opc.c: Rename from mn10200-opc.c.
1709 * m10300-dis.c: Rename from mn10300-dis.c
1710 * m10300-opc.c: Rename from mn10300-opc.c.
1711 * Makefile.in: Update accordingly.
1713 * mips16-opc.c: Add mul and dmul macros.
1715 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1717 * makefile.vms: Update CFLAGS, add clean target.
1719 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1721 * mips-opc.c: Add "wait". From Ralf Baechle
1722 <ralf@gnu.ai.mit.edu>.
1724 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1725 * configure, config.in: Rebuild.
1726 * sysdep.h: Include <stdlib.h> if it exists.
1727 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1729 * Makefile.in: Rebuild dependencies.
1731 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1733 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1734 Andrew Bray <andy@madhouse.demon.co.uk>.
1736 * mips-opc.c: Add cast when setting mips_opcodes.
1738 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1740 * v850-dis.c (disassemble): Fix sign extension problem.
1741 * v850-opc.c (extract_d*): Fix sign extension problems to make
1742 disassembly calculate branch offsets correctly.
1744 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1748 * mips-opc.c: Add dctr and dctw.
1751 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1753 * d30v-dis.c (print_insn): Change the way signed constants
1756 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1758 * Makefile.in (BFD_H): New variable.
1759 (HFILES): New variable.
1760 (CFILES): Add all C files.
1761 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1762 Delete old dependencies, and build new ones.
1763 * dep-in.sed: New file.
1765 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1767 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1769 start-sanitize-coldfire
1770 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1772 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1775 end-sanitize-coldfire
1776 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1778 * mn10200-opc.c: Change "trap" to "syscall".
1779 * mn10300-opc.c: Add new "syscall" instruction.
1781 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1783 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1784 mulul insns on the coldfire.
1786 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1788 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1789 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1790 (print_insn_little_arm): Likewise.
1792 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1794 Based on patches from H.J. Lu <hjl@lucon.org>:
1795 * i386-dis.c (fetch_data): Add prototype.
1796 * m68k-dis.c (fetch_data): Add prototype.
1797 (dummy_print_address): Add prototype. Make static.
1798 * ppc-opc.c (valid_bo): Add prototype.
1799 * sparc-dis.c (build_hash_table): Add prototype.
1800 (is_delayed_branch, compute_arch_mask): Add prototypes.
1801 (print_insn_sparc): Make several local variables const.
1802 (compare_opcodes): Change arguments to const PTR. Add prototype.
1803 * sparc-opc.c (arg): Change name field to be const.
1804 (lookup_name, lookup_value): Add prototypes. Change table and
1805 name parameters to be const.
1806 (sparc_encode_asi): Change name parameter to be const.
1807 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1808 (sparc_encode_sparclet_cpreg): Likewise.
1809 (sparc_decode_asi): Change return type to be const.
1810 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1811 (sparc_decode_sparclet_cpreg): Likewise.
1813 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1815 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1816 Solaris doesn't like the combined options, and the -f is
1818 (stamp-tshlink, install): Likewise.
1820 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1822 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1825 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1827 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1829 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1831 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1834 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1836 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1838 start-sanitize-tic80
1839 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1841 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1843 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1845 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1848 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1850 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1851 floatformat_to_double to make portable.
1852 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1855 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1857 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1858 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1860 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1862 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1863 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1865 start-sanitize-tic80
1866 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1868 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1869 (OFF_SL_BR_SCALED): ... to this, and added the flag
1870 TIC80_OPERAND_BASEREL to the flags word.
1871 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1875 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1877 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1878 Change mips_opcodes from const array to a pointer,
1879 and change bfd_mips_num_opcodes from const int to int,
1880 so that we can increase the size of the mips opcodes table
1883 start-sanitize-tic80
1884 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1886 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1887 store BITNUM values in the table in one's complement form
1888 to match behavior when assembler is given a raw numeric
1889 value for a BITNUM operand.
1890 * tic80-dis.c (print_operand_bitnum): Ditto.
1894 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1896 * d30v-opc.c: Removed references to FLAG_X.
1899 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1901 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1904 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1906 * Makefile.in: Added d30v object files.
1907 * configure: (bfd_d30v_arch) Rebuilt.
1908 * configure.in: (bfd_d30v_arch) Added new case.
1909 * d30v-dis.c: New file.
1910 * d30v-opc.c: New file.
1911 * disassemble.c (disassembler) Add entry for d30v.
1914 start-sanitize-tic80
1915 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1917 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1918 representations for the floating point BITNUM values.
1920 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1922 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1923 in the table in one's complement form, as they appear in the
1925 (tic80_symbol_to_value): Use macros to access predefined
1927 (tic80_value_to_symbol): Ditto.
1928 (tic80_next_predefined_symbol): New function.
1929 * tic80-dis.c (print_operand_bitnum): Remove code that did
1930 one's complement for BITNUM values.
1933 start-sanitize-r5900
1934 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1936 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1939 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1941 * makefile.vms: Remove 8 bit characters. Update to latest
1944 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1946 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1948 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1950 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1951 (IMM24_PCREL): Likewise.
1953 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1955 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1956 address for an extended PC relative instruction that is not a
1959 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1961 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1964 start-sanitize-tic80
1965 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1967 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1968 (tic80_opcodes): Sort entries so that long immediate forms
1969 come after short immediate forms, making it easier for
1970 assembler to select the right one for a given operand.
1973 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1975 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1977 (print_insn_mips16): Likewise.
1979 start-sanitize-r5900
1980 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1982 * mips-opc.c: add r5900.
1985 start-sanitize-tic80
1986 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1988 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1989 a symbol class that restricts translation to just that
1990 class (general register, condition code, etc).
1992 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1994 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1995 and REG_DEST_E for register operands that have to be
1996 an even numbered register. Add REG_FPA for operands that
1997 are one of the floating point accumulator registers.
1998 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1999 (tic80_opcodes): Change entries that need even numbered
2000 register operands to use the new operand table entries.
2001 Add "or" entries that are identical to "or.tt" entries.
2004 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2006 * mips16-opc.c: Add new cases of exit instruction for
2008 * mips-dis.c (print_mips16_insn_arg): Display floating point
2009 registers in operands of exit instruction. Print `$' before
2010 register names in operands of entry and exit instructions.
2012 start-sanitize-tic80
2013 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2015 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2016 pairs for all predefined symbols recognized by the assembler.
2017 Also used by the disassembling routines.
2018 (tic80_symbol_to_value): New function.
2019 (tic80_value_to_symbol): New function.
2020 * tic80-dis.c (print_operand_control_register,
2021 print_operand_condition_code, print_operand_bitnum):
2022 Remove private tables and use tic80_value_to_symbol function.
2025 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2027 * d10v-dis.c (print_operand): Change address printing
2028 to correctly handle PC wrapping. Fixes PR11490.
2030 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2032 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2035 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2037 * mips-dis.c (print_insn_mips16): Set insn_info information.
2038 (print_mips16_insn_arg): Likewise.
2040 * mips-dis.c (print_insn_mips16): Better handling of an extend
2041 opcode followed by an instruction which can not be extended.
2043 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2045 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2046 coldfire moveb instruction to not allow an address register as
2047 destination. Although the documentation does not indicate that
2048 this is invalid, experiments uncovered unexpected behavior.
2049 Added a comment explaining the situation. Thanks to Andreas
2050 Schwab for pointing this out to me.
2052 start-sanitize-tic80
2053 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2055 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2056 entries are presorted so that entries with the same mnemonic are
2057 adjacent to each other in the table. Sort the entries for each
2058 instruction so that this is true.
2061 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2063 * m68k-dis.c: Include <libiberty.h>.
2064 (print_insn_m68k): Sort the opcode table on the most significant
2065 nibble of the opcode.
2067 start-sanitize-tic80
2068 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2070 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2071 "vsub", "vst", "xnor", and "xor" instructions.
2072 (V_a1): Renamed from V_a, msb of accumulator reg number.
2073 (V_a0): Add macro, lsb of accumulator reg number.
2075 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2077 * tic80-dis.c (print_insn_tic80): Broke excessively long
2078 function up into several smaller ones and arranged for
2079 the instruction printing function to be callable recursively
2080 to print vector instructions that have both a load and a
2081 math instruction packed into a single opcode.
2082 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2083 to explain why it comes after the other vector opcodes.
2086 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2088 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2089 move insns to handle immediate operands.
2091 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2093 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2094 fix operand mask in the "moveml" entries for the coldfire.
2096 start-sanitize-tic80
2097 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2099 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2100 New macros for building vector instruction opcodes.
2101 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2102 FMT_LI, which were unused. The field is now a flags field.
2103 Remove some opcodes that are possible, but illegal, such
2104 as long immediate instructions with doubles for immediate
2105 values. Add "vadd" and "vld" instructions.
2107 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2109 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2110 the order more logical. Move the shift alias instructions ("rotl",
2111 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2112 interspersed with the regular sr.x and sl.x instructions. Add
2113 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2114 "sub", "subu", "swcr", and "trap".
2116 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2118 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2119 (OFF_SL_PC): Renamed from OFF_SL.
2120 (OFF_SS_BR): New operand type for base relative operand.
2121 (OFF_SL_BR): New operand type for base relative operand.
2122 (REG_BASE): New operand type for base register operand.
2123 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2124 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2125 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2127 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2128 10 char field, padded with spaces on rhs, rather than a string
2129 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2130 than old TIC80_OPERAND_RELATIVE. Add support for new
2131 TIC80_OPERAND_BASEREL flag bit.
2133 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2135 * tic80-dis.c (print_insn_tic80): Print floating point operands
2137 * tic80-opc.c (SPFI): Add single precision floating point
2138 immediate operand type.
2139 (ROTATE): Add rotate operand type for shifts.
2140 (ENDMASK): Add for shifts.
2141 (n): Macro for the 'n' bit.
2142 (i): Macro for the 'i' bit.
2143 (PD): Macro for the 'PD' field.
2144 (P2): Macro for the 'P2' field.
2145 (P1): Macro for the 'P1' field.
2146 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2150 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2152 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2153 adding in current address for pc-relative operands.
2155 start-sanitize-tic80
2156 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2158 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2159 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2160 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2161 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2162 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2163 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2164 (REG_SCALED, LSI_SCALED): New operand types.
2165 (E): New macro for 'E' bit at bit 27.
2166 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2167 opcodes, including the various size flavors (b,h,w,d) for
2168 the direct load and store instructions.
2170 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2172 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2174 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2175 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2176 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2177 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2178 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2179 masks with "MASK_* & ~M_*" to get the M bit reset.
2180 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2182 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2184 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2185 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2186 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2188 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2189 CC, SICR, and LICR table entries.
2190 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2191 "bcnd", and "brcr" opcodes.
2194 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2196 * ppc-opc.c (powerpc_operands): Make comment match the
2197 actual fields (no shift field).
2198 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2199 start-sanitize-tic80
2200 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2201 partial implementation, work in progress.
2202 * tic80-opc.c (tic80_operands): Begin construction operands table.
2203 (tic80_opcodes): Continue populating opcodes table and start
2204 filling in the operand indices.
2205 (tic80_num_opcodes): Add this.
2208 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2210 * m68k-opc.c: Add #B case for moveq.
2212 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2214 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2215 before they are used.
2217 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2219 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2220 for "breakpoint" instruction.
2222 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2224 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2225 (dep): Use ALL_CFLAGS rather than CFLAGS.
2227 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2229 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2232 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2234 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2235 start-sanitize-tic80
2236 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2239 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2241 * mips16-opc.c: Add "abs".
2243 start-sanitize-tic80
2244 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2246 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2247 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2248 (disassembler): Add bfd_arch_tic80 support to set disassemble
2249 to print_insn_tic80.
2250 * tic80-dis.c (print_insn_tic80): Add stub.
2252 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2254 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2255 * configure: Regenerate with autoconf.
2256 * tic80-dis.c: Add file.
2257 * tic80-opc.c: Add file.
2260 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2262 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2264 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2266 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2267 (mn10200_opcodes): Use it for some logicals and btst insns.
2268 Add "break" and "trap" instructions.
2270 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2272 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2274 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2276 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2277 relative load or add now depends upon whether the instruction is
2280 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2282 * mn10200-dis.c: Finish writing disassembler.
2283 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2284 Fix mask for "jmp (an)".
2286 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2287 handle endianness issues for mn10300.
2289 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2291 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2293 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2294 instruction. Fix opcode field for "movb (imm24),dn".
2296 * mn10200-opc.c (mn10200_operands): Fix insertion position
2299 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2301 * mn10200-opc.c: Create mn10200 opcode table.
2302 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2303 but moving along nicely.
2305 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2307 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2309 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2311 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2312 specifiers for fmovem* instructions.
2314 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2316 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2318 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2320 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2323 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2325 * mn10300-opc.c: Add some comments explaining the various
2328 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2330 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2332 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2335 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2336 operand specifiers in fmovm* instructions.
2338 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2340 * ppc-opc.c (insert_li): Give an error if the offset has the two
2341 least significant bits set.
2343 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2345 * mips-dis.c (print_insn_mips16): Separate the instruction from
2346 the arguments with a tab, not a space.
2348 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2350 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2353 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2356 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2358 * configure: Rebuild with autoconf 2.12.
2360 Add support for mips16 (16 bit MIPS implementation):
2361 * mips16-opc.c: New file.
2362 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2363 (mips16_reg_names): New static array.
2364 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2365 after seeing a 16 bit symbol.
2366 (print_insn_little_mips): Likewise.
2367 (print_insn_mips16): New static function.
2368 (print_mips16_insn_arg): New static function.
2369 * mips-opc.c: Add jalx instruction.
2370 * Makefile.in (mips16-opc.o): New target.
2371 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2372 * configure: Rebuild.
2374 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2376 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2377 operand specifiers in *save, *restore and movem* instructions.
2379 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2382 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2383 register operands for immediate arithmetic, not, neg, negx, and
2384 set according to condition instructions.
2386 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2387 specifier of the effective-address operand in immediate forms of
2388 arithmetic instructions. The specifier for the immediate operand
2389 notes how and where the constant will be stored.
2391 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2393 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2396 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2399 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2401 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2403 * mn10300-dis.c (disassemble): Handle register lists.
2405 * mn10300-opc.c: Fix handling of register list operand for
2406 "call", "ret", and "rets" instructions.
2408 * mn10300-dis.c (disassemble): Print PC-relative and memory
2409 addresses symbolically if possible.
2410 * mn10300-opc.c: Distinguish between absolute memory addresses,
2411 pc-relative offsets & random immediates.
2413 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2415 (disassemble): Handle SPLIT and EXTENDED operands.
2417 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2419 * mn10300-dis.c: Rough cut at printing some operands.
2421 * mn10300-dis.c: Start working on disassembler support.
2422 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2424 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2426 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2428 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2430 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2432 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2434 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2435 register argument is calls and jmp instructions.
2437 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2439 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2440 getx operand. Fix opcode for mulqu imm,dn.
2442 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2444 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2445 in MN10300_OPERAND_SPLIT operands for how many bits
2446 appear in the basic insn word. Add IMM32_HIGH24,
2447 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2448 (mn10300_opcodes): Use new operands as needed.
2450 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2451 for bset, bclr, btst instructions.
2452 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2454 * mn10300-opc.c (mn10300_operands): Remove many redundant
2455 operands. Update opcode table as appropriate.
2456 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2457 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2459 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2461 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2462 operands (for indexed load/stores). Fix bitpos for DI
2463 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2464 few instructions that insert immediates/displacements in the
2465 middle of the instruction. Add IMM8E for 8 bit immediate in
2466 the extended part of an instruction.
2467 (mn10300_operands): Use new opcodes as appropriate.
2469 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2471 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2472 sequential so the assembler never parallelizes it with
2475 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2477 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2478 a data/address register that appears in register field 0
2479 and register field 1.
2480 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2482 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2484 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2485 standard disassembly.
2487 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2488 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2489 Recategorize PALcode instructions.
2491 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2493 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2495 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2497 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2498 there are no operand types.
2500 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2502 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2504 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2506 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2508 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2510 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2512 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2513 and sst.w instructions.
2515 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2518 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2520 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2523 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2525 * ppc-opc.c (PPCPWR2): Define.
2526 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2529 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2531 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2532 field for movhu instruction.
2534 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2535 cast value to "long" not "signed long" to keep hpux10
2538 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2540 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2543 * mn10300-opc.c (FMT*): Remove definitions.
2545 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2546 for shift-by-register opcodes.
2548 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2549 into [AD][MN][01] for encoding the position of the register
2552 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2554 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2555 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2557 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2559 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2560 Fix various typos. Add "PAREN" operand.
2561 (MEM, MEM2): Define.
2562 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2563 operands. Fix several typos.
2565 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2568 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2570 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2571 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2573 (mn10300_opcodes): Break opcode format out into its own field.
2574 Update many operand fields to deal with signed vs unsigned
2575 issues. Fix one or two typos in the "mov" instruction
2576 opcode, mask and/or operand fields.
2578 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2580 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2581 m68851 wasn't reset.
2583 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2585 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2586 all opcodes. Very rough cut at operands for all opcodes.
2588 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2591 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2593 * mn10200-opc.c, mn10300-opc.c: New files.
2594 * mn10200-dis.c, mn10300-dis.c: New files.
2595 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2596 * disassemble.c: Break mn10x00 support into 10200 and 10300
2598 * configure.in: Likewise.
2599 * configure: Rebuilt.
2601 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2603 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2605 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2607 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2609 * disassemble (ARCH_mn10x00): Define.
2610 (disassembler): Handle bfd_arch_mn10x00.
2611 * configure.in: Recognize bfd_mn10x00_arch.
2612 * configure: Rebuilt.
2614 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2616 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2617 accordingly. Don't declare functions using op_rtn.
2619 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2621 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2622 params to be more standard.
2623 * (disassemble): Print absolute addresses and symbolic names for
2624 branch and jump targets.
2625 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2627 * (v850_opcodes): Add breakpoint insn.
2629 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2631 * m68k-opc.c: Move the fmovemx data register cases before the
2632 other cases, so that they get recognized before the data register
2633 does gets treated as a degenerate register list.
2635 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2637 * mips-opc.c: Add a case for "div" and "divu" with two registers
2638 and a destination of $0.
2640 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2642 * mips-dis.c (print_insn_arg): Add prototype.
2643 (_print_insn_mips): Ditto.
2645 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2647 * mips-dis.c (print_insn_arg): Print condition code registers as
2650 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2652 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2654 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2656 * v850-dis.c (disassemble): Make static. Provide prototype.
2658 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2660 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2663 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2665 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2666 ']' characters into the output stream.
2667 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2668 Add "memop" field to all opcodes (for the disassembler).
2669 Reorder opcodes so that "nop" comes before "mov" and "jr"
2670 comes before "jarl".
2672 * v850-dis.c (print_insn_v850): Fix typo in last change.
2674 * v850-dis.c (print_insn_v850): Properly handle disassembling
2675 a two byte insn at the end of a memory region when the memory
2676 region's size is only two byte aligned.
2678 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2680 * v850-dis.c (v850_reg_names): Define.
2681 (v850_sreg_names, v850_cc_names): Likewise.
2682 (disassemble): Very rough cut at printing operands (unformatted).
2684 * v850-opc.c (BOP_MASK): Fix.
2685 (v850_opcodes): Fix mask for jarl and jr.
2687 * v850-dis.c: New file. Skeleton for disassembler support.
2688 * Makefile.in Remove v850 references, they're not needed here.
2689 * configure.in: Add v850-dis.o when building v850 toolchains.
2690 * configure: Rebuilt.
2691 * disassemble.c (disassembler): Call v850 disassembler.
2693 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2694 (insert_d8_6, extract_d8_6): New functions.
2695 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2696 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2698 (IF4A, IF4B): Use "D7" instead of "D7S".
2699 (IF4C, IF4D): Use "D8_7" instead of "D8".
2700 (IF4E, IF4F): New. Use "D8_6".
2701 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2702 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2704 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2705 (v850_operands): Change D16 to D16_15, use special insert/extract
2706 routines. New new D16 that uses the generic insert/extract code.
2707 (IF7A, IF7B): Use D16_15.
2708 (IF7C, IF7D): New. Use D16.
2709 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2711 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2712 message. Issue an error if the branch offset is odd.
2714 * v850-opc.c: Add notes about needing special insert/extract
2715 for all the load/store insns, except "ld.b" and "st.b".
2717 * v850-opc.c (insert_d22, extract_d22): New functions.
2718 (v850_operands): Use insert_d22 and extract_d22 for
2720 (insert_d9): Fix range check.
2722 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2724 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2725 and set bits field to D9 and D22 operands.
2727 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2729 * v850-opc.c (v850_operands): Define SR2 operand.
2730 (v850_opcodes): "ldsr" uses R1,SR2.
2732 * v850-opc.c (v850_opcodes): Fix opcode specs for
2733 sld.w, sst.b, sst.h, sst.w, and nop.
2735 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2737 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2738 end of the opcode table.
2740 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2742 * d10v-opc.c (pre_defined_registers): Added register pairs,
2743 "r0-r1", "r2-r3", etc.
2745 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2747 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2748 Create I16U for an unsigned 16bit mmediate operand.
2749 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2751 * v850-opc.c (v850_operands): Define EP operand.
2752 (IF4A, IF4B, IF4C, IF4D): Use EP.
2754 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2755 with immediate operand, "movhi". Tweak "ldsr".
2757 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2758 correct. Get sld.[bhw] and sst.[bhw] closer.
2760 * v850-opc.c (v850_operands): "not" is a two byte insn
2762 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2764 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2766 * v850-opc.c (two): Get order of words correct.
2768 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2770 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2771 register source and destination operands.
2772 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2774 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2775 same thinko in "trap" opcode.
2777 * v850-opc.c (v850_opcodes): Add initializer for size field
2780 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2781 Add D8 for 8-bit unsigned field in short load/store insns.
2782 (IF4A, IF4D): These both need two registers.
2783 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2784 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2785 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2786 for "ldsr" and "stsr".
2787 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2790 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2791 short store word (sst.w).
2793 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2795 * v850-opc.c (v850_operands): Added insert and extract fields,
2796 pointers to functions that handle unusual operand encodings.
2798 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2800 * v850-opc.c (v850_opcodes): Enable "trap".
2802 * v850-opc.c (v850_opcodes): Fix order of displacement
2803 and register for "set1", "clr1", "not1", and "tst1".
2805 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2807 * v850-opc.c (v850_operands): Add "B3" support.
2808 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2811 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2813 * v850-opc.c: Close unterminated comment.
2815 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2817 * v850-opc.c (v850_operands): Add flags field.
2818 (v850_opcodes): add move opcodes.
2820 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2822 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2823 * configure: (bfd_v850v_arch) Add new case.
2824 * configure.in: (bfd_v850_arch) Add new case.
2825 * v850-opc.c: New file.
2827 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2829 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2831 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2833 * d10v-opc.c: Add additional information to the opcode
2834 table to help determinine which instructions can be done
2837 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2839 * mpw-make.sed: Update editing of include pathnames to be
2842 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2844 * arm-opc.h: Added "bx" instruction definition.
2846 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2848 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2850 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2852 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2854 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2856 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2858 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2860 * makefile.vms: Update for alpha-opc changes.
2862 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2864 * i386-dis.c (print_insn_i386): Actually return the correct value.
2865 (ONE, OP_ONE): #ifdef out; not used.
2867 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2869 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2870 Changed subi operand type to treat 0 as 16.
2872 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2874 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2877 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2879 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2880 memory transfer instructions. Add new format string entries %h and %s.
2881 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2884 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2886 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2887 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2889 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2891 * alpha-dis.c (print_insn_alpha_osf): Remove.
2892 (print_insn_alpha_vms): Remove.
2893 (print_insn_alpha): Make globally visible. Chose the register
2894 names based on info->flavour.
2895 * disassemble.c: Always return print_insn_alpha for the alpha.
2897 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2899 * d10v-dis.c (dis_long): Handle unknown opcodes.
2901 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2903 * d10v-opc.c: Changes to support signed and unsigned numbers.
2904 All instructions with the same name that have long and short forms
2905 now end in ".l" or ".s". Divs added.
2906 * d10v-dis.c: Changes to support signed and unsigned numbers.
2908 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2910 * d10v-dis.c: Change all functions to use info->print_address_func.
2912 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2914 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2915 move ccr/sr insns more strict so that the disassembler only
2916 selects them when the addressing mode is data register.
2918 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2919 * d10v-opc.c (pre_defined_registers): Declare.
2920 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2921 to pick a better name for the registers.
2923 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2925 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2926 operands for fexpand and fpmerge. From Christian Kuehnke
2927 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2929 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2931 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2932 print routine. Take new regnames and cpumask arguments.
2933 Kill the environment variable nonsense.
2934 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2935 (print_insn_alpha_vms): New function. Do VMS style regnames.
2936 * disassemble.c (disassembler): Test bfd flavour to pick
2937 between OSF and VMS routines. Default to OSF.
2939 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2941 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2942 * configure: Rebuild.
2943 * Makefile.in (install): Use @INSTALL_SHLIB@.
2945 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2947 * configure: (bfd_d10v_arch) Add new case.
2948 * configure.in: (bfd_d10v_arch) Add new case.
2949 * d10v-dis.c: New file.
2950 * d10v-opc.c: New file.
2951 * disassemble.c (disassembler) Add entry for d10v.
2953 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2955 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2956 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2958 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2960 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2961 distinguish between variants of the instruction set.
2962 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2963 distinguish between variants of the instruction set.
2965 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2967 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2968 the 8086 instruction set.
2969 * i386-dis.c: General cleanups. Make most things static. Add
2970 prototypes. Get rid of static variables aflags and dflags. Pass
2971 them as args (to almost everything).
2973 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2975 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2977 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2979 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2980 if the next arg is marked with SRC_IN_DST. Gross.
2982 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2983 we're looking for and find EXR.
2985 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2986 if we're looking for KBIT and we don't find it.
2988 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2991 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2992 3bit immediate operands.
2994 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2996 * Released binutils 2.7.
2998 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2999 <kkaempf@progis.ac-net.de>.
3001 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3003 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3005 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3007 * sparc-dis.c (print_insn_sparclite): New routine to print
3008 sparclite instructions.
3010 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3012 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3014 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3016 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3017 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3018 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3020 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3022 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3023 Use autoconf-set values.
3024 (docdir, oldincludedir): Removed.
3025 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3027 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3029 * alpha-opc.c: New file.
3030 * alpha-opc.h: Remove.
3031 * alpha-dis.c: Complete rewrite to use new opcode table.
3032 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3033 * configure: Rebuild with autoconf 2.10.
3034 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3035 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3037 (alpha-opc.o): New target.
3039 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3041 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3042 Set imm_added_to_rs1 even if the source and destination register
3045 * sparc-opc.c: Add some two operand forms of the wr instruction.
3047 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3049 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3052 * disassemble.c (disassembler): Handle H8/S.
3053 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3055 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3057 * sparc-opc.c: Add beq/teq as aliases for be/te.
3059 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3060 <sergei@msil.sps.mot.com>.
3062 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3064 * makefile.vms: New file.
3066 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3068 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3070 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3073 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3075 * i386-dis.c (OP_OFF): Call append_prefix.
3077 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3079 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3080 unsigned long to silence a warning from the Solaris PowerPC
3083 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3085 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3087 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3089 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3091 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3092 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3093 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3094 cpush, cpusha, cpull sparclet insns.
3096 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3098 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3100 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3102 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3103 Set F_FLOAT on other floating point instructions.
3105 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3107 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3109 (powerpc_opcodes): Add 860/821 specific SPRs.
3111 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3113 * configure.in: Permit --enable-shared to specify a list of
3114 directories. Set and substitute BFD_PICLIST.
3115 * configure: Rebuild.
3116 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3117 uses. Set to @BFD_PICLIST@.
3119 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3121 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3122 not "abs", which may be needed for the absolute in something
3123 like btst #0,@10:8. Print L_3 immediates separately from other
3124 immediates. Change ABSMOV reference to ABS8MEM.
3126 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3128 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3129 (current_arch_mask): New static global.
3130 (compute_arch_mask): New static function.
3131 (print_insn_sparc): Delete sparc_v9_p. New static local
3132 current_mach. Resort opcode table if current_mach changes.
3133 Generalize "insn not supported" test.
3134 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3135 Delete test for v9/!v9.
3136 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3138 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3139 (brfcx): Renamed to FBRX.
3140 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3141 coprocessor mnemonics are not supported on the sparclet).
3142 (condf): Renamed to CONDF.
3143 (SLCBCC2): Delete F_ALIAS flag.
3145 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3147 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3148 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3150 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3152 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3153 that the shared library version number is set correctly.
3155 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3157 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3158 Miles Bader <miles@gnu.ai.mit.edu>.
3159 * configure: Rebuild.
3161 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3163 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3166 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3168 * configure: Rebuild with autoconf 2.8.
3170 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3172 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3173 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3175 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3177 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3178 since they appear as targets in Makefile.in.
3179 * configure: Rebuild.
3181 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3183 * mpw-make.sed: Edit out shared library support bits.
3185 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3187 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3188 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3189 (sparc_opcodes): Add sparclet insns.
3190 (sparclet_cpreg_table): New static local.
3191 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3192 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3194 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3196 * i386-dis.c (index16): New static variable.
3197 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3199 (OP_indirE): Return result of OP_E.
3200 (OP_E): Check for 16 bit addressing mode, and disassemble
3201 correctly. Optimised 32 bit case a little. Don't print
3202 "(base,index,scale)" when sib specifies only an offset.
3204 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3206 * configure.in: Set and substitute SHLIB_DEP.
3207 * configure: Rebuild.
3208 * Makefile.in (SHLIB_DEP): New variable.
3209 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3210 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3211 COMMON_SHLIB, add them to piclist with appropriate modifications.
3212 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3213 here: just use piclist.
3215 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3217 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3218 (print_insn_sparc): Rewrite v9/not-v9 tests.
3219 (compare_opcodes): Likewise.
3220 * sparc-opc.c (MASK_<ARCH>): Define.
3221 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3222 (sparclet,v6notv9): Define.
3223 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3224 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3226 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3228 * configure.in: Call AC_PROG_CC before configure.host.
3229 * configure: Rebuild.
3231 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3233 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3235 * i386-dis.c (onebyte_has_modrm): New static array.
3236 (twobyte_has_modrm): New static array.
3237 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3239 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3241 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3244 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3246 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3249 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3251 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3252 m68010up, not just m68020up | cpu32.
3254 * Makefile.in (SONAME): New variable.
3255 ($(SHLINK)): Make a link to the transformed name, as well.
3256 (stamp-tshlink): New target.
3257 (install): Skip stamp-tshlink during install.
3259 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3261 * configure.in: Call AC_ARG_PROGRAM.
3262 * configure: Rebuild.
3263 * Makefile.in (program_transform_name): New variable.
3264 (install): Transform library name before installing it.
3266 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3268 * i960-dis.c (mem): Add HX dcinva instruction.
3270 Support for building as a shared library, based on patches from
3271 Alan Modra <alan@spri.levels.unisa.edu.au>:
3272 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3273 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3274 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3275 * configure: Rebuild.
3276 * Makefile.in (ALLLIBS): New variable.
3277 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3278 (COMMON_SHLIB, SHLINK): New variables.
3279 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3280 (STAGESTUFF): Remove variable.
3281 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3282 (stamp-piclist, piclist): New targets.
3283 ($(SHLIB), $(SHLINK)): New targets.
3284 ($(OFILES)): Depend upon stamp-picdir.
3285 (disassemble.o): Build twice if PICFLAG is set.
3286 (MOSTLYCLEAN): Add pic/*.o.
3287 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3288 (distclean): Remove pic and stamp-picdir.
3289 (install): Install shared libraries.
3290 (stamp-picdir): New target.
3292 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3294 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3295 Print unknown instruction as "unknown", rather than in hex.
3297 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3299 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3301 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3303 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3305 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3307 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3308 when necessary. From Ulrich Drepper
3309 <drepper@myware.rz.uni-karlsruhe.de>.
3311 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3313 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3314 sparc_num_opcodes. Update architecture enum values.
3315 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3316 (sparc_opcode_lookup_arch): New function.
3317 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3318 (sparc_opcodes): Add v9a shutdown insn.
3320 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3322 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3323 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3325 (print_insn_sparc64): Deleted.
3326 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3329 * sparc-opc.c (architecture_pname): Add v9a.
3331 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3333 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3334 incorrectly defined as 0x16 when it should be 0x15.
3335 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3336 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3337 excb (exception barrier) which is defined in the Alpha
3338 Architecture Handbook version 2.
3339 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3340 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3341 disassembled as or, for example.
3343 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3345 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3346 (_print_insn_mips): Change i from int to unsigned int.
3348 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3350 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3351 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3353 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3355 * i386-dis.c: Added Pentium Pro instructions.
3357 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3359 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3362 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3364 * sh-opc.h (sh_nibble_type): Added REG_B.
3365 (sh_arg_type): Added A_REG_B.
3366 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3368 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3370 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3372 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3374 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3376 * Makefile.in (distclean): Remove stamp-h. From Ronald
3377 F. Guilmette <rfg@monkeys.com>.
3379 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3381 From David Mosberger-Tang <davidm@azstarnet.com>:
3382 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3385 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3387 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3388 (sh_table): Added many SH3 opcodes.
3389 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3391 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3393 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3394 (subco,subco.): Mark this PPC, not PPCCOM.
3396 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3398 * configure: Rebuild with autoconf 2.7.
3400 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3402 * configure: Rebuild with autoconf 2.6.
3404 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3406 * configure.in: Sort list of architectures. Accept but do nothing
3407 for alliant, convex, pyramid, romp, and tahoe.
3409 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3411 * a29k-dis.c (print_special): Change num to unsigned int.
3413 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3415 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3418 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3420 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3421 * configure: Rebuilt.
3423 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3425 * configure.in: Add case for bfd_i860_arch.
3426 * configure: Rebuild.
3428 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3430 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3431 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3432 (NEXTDOUBLE): Likewise.
3433 (print_insn_m68k): Don't match fmoveml if there is more than one
3434 register in the list.
3435 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3437 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3439 * m68k-opc.c: Use #W rather than #w.
3440 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3442 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3444 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3445 and likewise for all the dbxx opcodes.
3447 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3449 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3451 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3453 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3454 the VR4100 specific instructions to the mips_opcodes structure.
3456 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3458 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3459 ugly Metrowerks bug in CW6, is fixed in CW7.
3461 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3463 * ppc-opc.c (whole file): Add flags for common/any support.
3465 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3467 * Makefile.in (BISON): Remove macro.
3468 (FLAGS_TO_PASS): Remove BISON.
3470 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3472 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3474 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3475 instructions that take no args by looking at the match mask.
3476 (print_insn_arg): Always print "%" before register names.
3477 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3478 [case '_']: Don't print "@#" before address.
3479 [case 'J']: Use "%s" as format string, not register name.
3480 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3482 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3484 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3487 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3489 From David Mosberger-Tang <davidm@azstarnet.com>
3491 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3492 (alpha_insn_set): added definitions for VAX floating point
3493 instructions (Unix compilers don't generate these, but handcoded
3494 assembly might still use them).
3496 * alpha-dis.c (print_insn_alpha): added support for disassembling
3497 the miscellaneous instructions in the Alpha instruction set.
3499 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3501 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3502 no longer create sysdep.h, sed ppc-opc.c to work around a
3503 serious Metrowerks C bug.
3504 * mpw-make.in: Remove.
3505 * mpw-make.sed: New file, used by mpw-configure to edit
3506 Makefile.in into an MPW makefile.
3508 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3510 * Makefile.in (maintainer-clean): New synonym for realclean.
3512 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3514 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3515 which use '0', '1', and '2' instead. Specify the proper size for
3516 a pmove immediate operand. Correct the pmovefd patterns to be
3517 moves to a register, not from a register.
3518 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3520 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3522 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3523 %psr, %wim, %tbr as F_NOTV9.
3525 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3527 * Makefile.in (Makefile): Just rebuild Makefile when running
3529 (config.h, stamp-h): New targets.
3530 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3531 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3532 rebuilding config.h.
3533 * configure: Rebuild.
3535 * mips-opc.c: Change unaligned loads and stores with "t,A"
3536 operands to use "t,A(b)".
3538 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3540 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3542 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3544 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3545 until 3 instead of until 2.
3547 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3549 * Makefile.in (ALL_CFLAGS): Define.
3550 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3551 (MOSTLYCLEAN): Add config.log.
3552 (distclean): Don't remove config.log.
3553 * configure.in: Substitute HDEFINES.
3554 * configure: Rebuild.
3556 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3558 * sh-opc.h (sh_arg_type): Add F_FR0.
3559 (sh_table, case fmac): Add F_FR0 as first argument.
3561 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3563 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3565 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3567 * sparc-dis.c: Remove all references to NO_V9.
3569 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3571 * aclocal.m4: Just include ../bfd/aclocal.m4.
3572 * configure: Rebuild.
3574 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3576 * sparc-dis.c (X_DISP19): Define.
3577 (print_insn, case 'G'): Use it.
3578 (print_insn, case 'L'): Sign extend displacement.
3580 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3582 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3583 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3584 host_makefile_frag or frags.
3585 * aclocal.m4: New file.
3586 * configure: Rebuild.
3587 * Makefile.in (INSTALL): Set to @INSTALL@.
3588 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3589 (INSTALL_DATA): Set to @INSTALL_DATA@.
3591 (AR_FLAGS): Set to rc rather than qc.
3592 (CC): Define as @CC@.
3593 (CFLAGS): Set to @CFLAGS@.
3594 (@host_makefile_frag@): Remove.
3595 (config.status): Remove dependency upon @frags@.
3597 * configure.in: ../bfd/config.bfd now just sets shell variables.
3598 Use them rather than looking through target Makefile fragments.
3599 * configure: Rebuild.
3601 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3603 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3605 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3607 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3608 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3611 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3612 (lookup_{name,value}): New functions.
3613 (prefetch_table): New static local.
3614 (sparc_{encode,decode}_prefetch): New functions.
3615 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3617 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3619 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3622 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3624 * sh-dis.c: Correct comment on first line of file.
3626 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3628 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3630 * sparc-opc.c (asi, membar): New static locals.
3631 (sparc_{encode,decode}_{asi,membar}): New functions.
3632 (sparc_opcodes, membar insn): Fix.
3633 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3634 Support decoding of membar masks.
3637 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3639 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3641 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3643 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3644 and likewise for the other branches. Add bhs as an alias for bcc,
3645 and likewise for the size variants. Add dbhs as an alias for
3648 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3650 * sh-opc.h (FP sts instructions): Update to match reality.
3652 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3654 * m68k-dis.c: (fpcr_names): Add % before all register names.
3655 (reg_names): Likewise.
3656 (print_insn_arg): Don't explicitly print % before register names.
3657 Add % before register names in static array names. In case 'r',
3658 print data registers as `@(Dn)', not `Dn@'. When printing a
3659 memory address, don't print @# before it.
3660 (print_indexed): Change base_disp and outer_disp from int to
3661 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3662 syntax. Sign extend 8 byte displacement correctly.
3663 (print_base): Print using MIT syntax. Print zpc when appropriate.
3664 Change parameter disp from int to bfd_vma.
3666 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3669 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3671 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3672 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3673 * sh-opc.h (sh_arg_type): Add new operand types.
3674 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3676 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3678 * Makefile.in (distclean): Remove generated file config.h.
3680 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3682 * Makefile.in (distclean): Remove generated file config.h.
3684 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3686 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3688 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3690 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3691 rather than numopcodes. Use m68k_opcodes rather than removed
3692 opcode function. Don't check F_ALIAS.
3693 (print_insn_arg): Change first parameter to be const char *.
3694 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3695 (m68k-opc.o): New target.
3696 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3697 * configure: Rebuild.
3699 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3701 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3702 (opcode_bits, opcode_hash_table): New variables.
3703 (opcodes_initialized): Renamed from opcodes_sorted.
3704 (build_hash_table): New function.
3705 (is_delayed_branch): Use hash table.
3706 (print_insn): Renamed from print_insn_sparc, made static.
3707 Build and use hash table. If !sparc64, ignore sparc64 insns,
3708 and vice-versa if sparc64.
3709 (print_insn_sparc, print_insn_sparc64): New functions.
3710 (compare_opcodes): Move sparc64 opcodes to end.
3711 Print commutative insns with constant second.
3712 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3714 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3716 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3717 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3718 avoids printing a delay slot in a delay slot.
3719 * sh-opc.h (sh_table): Fully bracket last entry.
3721 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3723 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3725 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3727 * configure.in: Get host_makefile_frag from ${srcdir}.
3729 * configure.in: Autoconfiscated. Check for string[s].h. Create
3730 config.h from config.in. Don't set up sysdep.h link.
3731 * sysdep.h: New file.
3732 * configure, config.in: New files, generated from configure.in.
3733 * Makefile.in: Updated to be processed autoconf-style.
3734 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3735 (Makefile): Depend on config.status.
3736 (config.status): New rule.
3737 * configure.bat: Update Makefile substitutions.
3739 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3741 * mips-opc.c (L1): Define.
3742 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3743 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3746 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3748 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3749 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3750 have multiple add units but only a single logical unit.
3752 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3753 shifted by 18, without any insertion or extraction function.
3754 (insert_cr, extract_cr): Remove.
3756 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3758 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3761 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3763 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3764 * sh-opc.h: Add copyright.
3766 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3768 * Makefile.in (crunch-m68k): Delete extra target accidentally
3769 checked in a while ago.
3771 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3773 * sh-opc.h (sh_table): Add SH3 support.
3775 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3777 * sh-opc.h: Added bsrf and braf.
3779 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3781 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3782 bogus [ls]fm{ea,fd} patterns.
3784 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3785 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3786 initialize it from memory. Make function static.
3787 (print_insn_{big,little}_arm): New functions.
3788 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3789 the correct endianness.
3791 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3793 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3796 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3798 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3799 17th, so that it builds again using GCC as the compiler.
3801 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3803 * mips-dis.c (print_insn_little_mips): Cast return value from
3804 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3805 expects an unsigned long, and that might be fewer words of
3806 argument storage (e.g., if bfd_vma is long long on a 32-bit
3808 (print_insn_big_mips): Likewise with bfd_getb32 value.
3809 (_print_insn_mips): Now static.
3811 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3813 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3814 gcc memory hog problem with initializer is fixed.
3816 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3818 Merge in support for Mac MPW as a host.
3819 (Old change descriptions retained for informational value.)
3821 * mpw-config.in (archname): Compute from the config.
3822 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3824 * mpw-config.in (target_arch): Compute from canonical target.
3825 (m68k, mips, powerpc, sparc): Add architectures.
3826 * mpw-make.in (disassemble.c.o): Add.
3827 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3829 * mpw-config.in (BFD_MACHINES): Set to a default value.
3830 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3832 * mpw-make.in (CSEARCH): Add extra-include to search path.
3834 * mpw-config.in (varargs.h): Don't create.
3835 (sysdep.h): Create using forward-include.
3836 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3838 * mpw-config.in: New file, MPW version of configure.in.
3839 * mpw-make.in: New file, MPW version of Makefile.in.
3841 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3843 * alpha-dis.c (print_insn_alpha): Put empty statement after
3846 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3848 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3849 (low_sign_extend): Likewise.
3850 (get_field): Delete unused function.
3851 (set_field, deposit_14, deposit_21): Likewise.
3853 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3855 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3858 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3860 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3862 * alpha-opc.h (OSF_ASMCODE): define
3863 print pal-code names as defined in App C of the
3864 Alpha Architecture Reference Manual
3866 * alpha-dis.c: cleaned up output
3867 print stylized code forms as defined in App A.4.3 of the
3868 Alpha Architecture Reference Manual
3870 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3872 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3874 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3877 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3879 * m68k-dis.c (opcode): New function. Returns address of opcode
3880 table entry given index, even if the opcode table was split to
3881 work around gcc bugs.
3882 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3884 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3885 (reg_names): Now const.
3886 (print_insn_arg): Arrays cacheFieldName and names now const.
3887 (print_indexed): Array scales now const.
3889 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3891 * ppc-opc.c: Sort recently added instructions by minor opcode
3892 number within major opcode number.
3894 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3896 * hppa-dis.c: Include libhppa.h.
3898 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3900 * mips-opc.c: Change dli to use M_DLI, and add dla.
3902 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3904 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3906 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3908 * mips-opc.c: Add r4650 mul instruction.
3910 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3912 * mips-opc.c: Add uld and usd macros for unaligned double load and
3915 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3917 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3918 mfdcr, mtdcr, icbt, iccci.
3920 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3922 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3923 signed char fields to shorts, more portable.
3925 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3927 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3928 char fields as signed chars, since they may have negative values.
3930 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3932 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3933 (mycroft@netbsd.org).
3935 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3937 From "Logg, Ed" <elogg@ea.com>:
3938 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3939 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3942 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3944 * ppc-opc.c: Changes based on patch from David Edelsohn
3945 <edelsohn@mhpcc.edu>.
3946 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3949 (insert_tbr): New static function.
3950 (extract_tbr): New static function.
3951 (XFXFXM_MASK, XFXM): Define.
3952 (XSPRBAT_MASK, XSPRG_MASK): Define.
3953 (powerpc_opcodes): Add instructions to access special registers by
3954 name. Add mtcr and mftbu.
3956 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3958 * mips-opc.c (P3): Define.
3959 (mips_opcodes): Add mad and madu.
3961 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3963 * configure.in: Add W65 support.
3964 * disassemble.c: Likewise.
3965 * w65-opc.h, w65-dis.c: New files.
3967 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3969 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3972 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3974 * mips-opc.c: Add dli as a synonym for li.
3976 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3978 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3979 print something for reserved opcode values, even if it won't
3982 * mips-dis.c (_print_insn_mips): When initializing, shift right
3983 and mask, to avoid sign extension problems on the Alpha.
3985 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3988 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3990 * sh-opc.h (mov.l gbr): Get direction right.
3991 * sh-dis.c (print_insn_shx): New function.
3992 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3993 print opcodes with right byte order.
3995 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3997 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3998 to avoid conflicts with getopt.
4000 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4002 * hppa-dis.c (print_insn_hppa): Read the instruction using
4003 bfd_getb32, so that it works on a little endian or 64 bit host.
4004 Remove unused local variable op.
4006 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4008 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4009 addu does not work correctly if -mips3.
4011 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4013 * a29k-dis.c (print_special): Add special register names defined
4014 on 29030, 29040 and 29050.
4015 (print_insn): Handle new operand type 'I'.
4017 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4019 * Makefile.in (INSTALL): Use top level install.sh script.
4021 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4023 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4024 that it works on a little endian host.
4026 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4028 * configure.in: Use ${config_shell} when running config.bfd.
4030 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4032 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4034 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4036 * a29k-dis.c (print_insn): Print the opcode.
4038 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4040 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4042 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4044 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4046 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4048 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4049 which store a value into memory.
4051 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4053 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4054 * arm-dis.c, arm-opc.h: New files.
4056 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4058 * Makefile.in (ns32k-dis.o): Add dependency.
4059 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4060 string, not as array of chars.
4062 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4064 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4066 * sparc-opc.c: Added sparclite extended FP operations, and
4067 versions of v9 impdep* instructions permitting specification of
4070 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4072 * i960-dis.c (reg_names): Now const.
4073 (struct sparse_tabent): New type, copied from array type in mem
4075 (ctrl): Local static array ctrl_tab now const.
4076 (cobr): Local static array cobr_tab now const.
4077 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4078 static variable mem_tab no longer explicitly initialized. Changed
4079 mem_init to const array of struct sparse_tabent.
4080 (reg): Local static variable reg_tab no longer explicitly
4081 initialized. Changed reg_init to const array of struct
4083 (ea): Local static array scale_tab now const.
4085 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4088 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4090 * configure.bat: the disassember needs to be enabled for
4091 "objdump -d" to work in djgpp.
4093 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4095 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4096 (invalid_float): Enabled general version, doesn't require running
4097 on ns32k host. Changed to take char* argument, and test for
4098 explicitly specified sizes, instead of using sizeof() on host CPU
4100 (INVALID_FLOAT): Cast first argument.
4101 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4102 list_P032, list_M032): Now const.
4103 (optlist, list_search): Made appropriate arguments now point to
4105 (print_insn_arg): Changed static array of one-character-string
4106 pointers into a static const array of characters; fixed sprintf
4107 statement accordingly.
4109 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4111 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4112 from distribution. A ns32k-dis.c from a previous distribution has
4113 been brought up to date and supports the new interface.
4115 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4117 * configure.in: add bfd_ns32k_arch target support.
4119 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4120 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4122 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4124 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4127 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4129 * h8300-dis.c, mips-dis.c: Don't use true and false.
4131 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4133 * configure.in: Change --with-targets to --enable-targets.
4135 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4137 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4138 opcodes to the first instruction with that opcode, to speed
4139 disassembly of large files. From ralphc@pyramid.com (Ralph
4142 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4144 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4146 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4148 * configure.bat: update to latest makefile.in
4150 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4152 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4153 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4154 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4155 slot insn is in a delay slot.
4156 * z8k-opc.h: (resflg): Fix patterns.
4157 * h8500-opc.h Fix CR insn patterns.
4159 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4161 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4162 "cmpl" before POWER versions, so that gas -many uses them.
4164 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4166 * disassemble.c: New file.
4167 * Makefile.in (OFILES): Add disassemble.o.
4168 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4169 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4170 binutils/configure.in.
4172 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4173 opcode being examined.
4175 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4177 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4178 (insert_ral, insert_ram, insert_ras): New functions.
4179 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4180 RAS for store with update.
4182 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4184 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4185 (edelsohn@npac.syr.edu).
4187 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4189 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4192 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4194 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4196 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4198 * ppc-opc.c (powerpc_operands): The signedp field has been
4199 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4200 instead. Add new operand SISIGNOPT.
4201 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4202 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4203 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4206 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4208 * i386-dis.c (struct private): Renamed to dis_private. `private'
4209 is a reserved word for dynix cc.
4211 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4213 * configure.in: Change error message to refer to bfd/config.bfd
4214 rather than bfd/configure.in.
4216 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4218 * ppc-opc.c: Define POWER2 as short alias flag.
4219 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4222 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4224 * i960-dis.c (print_insn_i960): Don't read a second word for
4225 opcodes 0, 1, 2 and 3.
4227 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4229 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4231 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4233 * m68881-ext.c: Removed; no longer used.
4234 * Makefile.in: Changed accordingly.
4236 * m68k-dis.c (ext_format_68881): Don't declare.
4237 (print_insn_m68k): If an instruction uses place 'i', it uses at
4238 least four fixed bytes.
4239 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4240 extended float, convert to double using floatformat_to_double, not
4241 ieee_extended_to_double, and fetch the data before converting it.
4243 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4245 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4246 davidj@ICSI.Berkeley.EDU (David Johnson).
4248 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4250 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4251 PowerPC uses bdnz[l][a].
4253 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4255 * dis-buf.c, i386-dis.c: Include sysdep.h.
4257 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4259 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4261 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4262 by Motorola PowerPC 601 with PPC_OPCODE_601.
4263 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4264 Disassemble Motorola PowerPC 601 instructions as well as normal
4265 PowerPC instructions.
4267 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4269 * i960-dis.c (reg, mem): Just use a static array instead of
4272 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4274 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4275 condition name index if this is for a negated condition.
4277 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4278 Floating point format for 'H' operand is backwards from normal
4279 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4280 operands (fmpyadd and fmpysub), handle bizarre register
4281 translation correctly for single precision format.
4283 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4284 or 'I' operands if the next format specifier is 'M' (fcmp
4285 condition completer).
4287 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4289 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4290 single number giving a bitmask for the MB and ME fields of an M
4291 form instruction. Change NB to accept 32, and turn it into 0;
4292 also turn 0 into 32 when disassembling. Seperated SH from NB.
4293 (insert_mbe, extract_mbe): New functions.
4294 (insert_nb, extract_nb): New functions.
4295 (SC_MASK): Mask out SA and LK bits.
4296 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4297 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4298 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4299 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4300 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4301 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4302 (powerpc_macros): Define table of macro definitions.
4303 (powerpc_num_macros): Define.
4305 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4306 if PPC_OPERAND_NEXT is set.
4308 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4310 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4311 char. Retrieve contents using bfd_getl32 instead of shifting.
4313 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4315 * ppc-opc.c: New file. Opcode table for PowerPC, including
4316 opcodes for POWER (RS/6000).
4317 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4318 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4319 (CFILES): Add ppc-dis.c.
4320 (ppc-dis.o, ppc-opc.o): New targets.
4321 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4323 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4325 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4326 No space before 'u', 'f', or 'N'.
4328 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4330 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4331 farther than we should.
4333 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4335 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4337 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4339 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4341 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4342 needs it, to prevent reading past the end of a section.
4344 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4346 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4347 Removed t,A case for la; always use t,A(b) case.
4349 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4351 From Ted Lemen <mellon@pepper.ncd.com>
4352 * mips-dis.c (print_insn_arg): Handle 'k'.
4353 * mips-opc.c: Make cache use k, not t.
4355 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4357 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4358 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4359 FLOAT_FORMAT_CODE to put out floating point register names.
4361 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4363 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4365 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4367 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4369 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4371 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4372 larger than 32. Moved dsxx32 variants first for disassembler.
4374 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4376 * z8kgen.c, z8k-opc.h: Add full lda information.
4378 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4380 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4381 movb instructions. Any necessary space will be emitted by
4382 the code to handle nullification completers.
4384 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4386 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4388 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4390 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4391 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4393 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4395 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4397 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4399 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4400 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4402 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4404 * m88k-dis.c (m88kdis): comment change. Remove space after
4406 (printop): handle new arg types DEC and XREG for m88110.
4408 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4410 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4411 type for absolute branch addresses. Delete special
4412 "ble" and "be" code in 'W' operand code.
4414 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4416 * mips-opc.c: Set hazard information correctly for branch
4417 likely instructions.
4419 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4421 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4422 info->fprintf_func for printing and info->print_address_func for
4425 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4427 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4429 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4431 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4432 Corrected second case of "b" for disassembler.
4434 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4436 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4437 to BFD swapping routines to correspond to BFD name changes.
4439 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4441 * mips-opc.c: Change div machine instruction to be z,s,t rather
4442 than s,t. Change div macro to be d,v,t rather than d,s,t.
4443 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4444 rem and remu which generates only the corresponding div
4445 instruction. This is for compatibility with the MIPS assembler,
4446 which only generates the simple machine instruction when an
4447 explicit destination of $0 is used.
4448 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4450 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4452 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4453 WR_31 hazard for bal, bgezal, bltzal.
4455 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4457 * hppa-dis.c (print_insn_hppa): Use print function
4458 from within the disassemble_info, not fprintf_filtered.
4460 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4462 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4463 Law, law@cs.utah.edu.)
4465 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4467 * mips-opc.c ("absu"): Removed.
4470 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4472 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4473 Changed hazard information to distinguish between memory load
4474 delays and coprocessor load delays.
4476 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4478 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4480 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4482 * configure.in: Don't pass cpu to config.bfd.
4484 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4486 * m88k-dis.c (m88kdis): Make class unsigned.
4488 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4490 * alpha-dis.c (print_insn_alpha): One branch format case was
4491 missing the instruction name.
4493 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4495 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4496 Add the arch-specific auxiliary files.
4497 (OFILES): Remove the arch-specific auxiliary files
4498 and use BFD_MACHINES instead of DIS_LIBS.
4499 * configure.in: Set BFD_MACHINES based on --with-targets option.
4501 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4503 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4506 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4508 * sparc-opc.c: Change CONST to const to deal with gcc
4509 -Dconst=__const -traditional.
4511 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4513 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4514 coprocessor instructions out of #if 0, and made them use new
4517 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4519 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4521 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4523 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4524 instruction, for use by the disassembler.
4526 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4527 hand-coded sign extensions that depended on 32-bit host ints.
4528 FIXME, we still depend on big-endian host bitfield ordering.
4529 (sparc_print_insn): Set the insn_info_valid field, and the
4530 other fields that describe the instruction being printed.
4532 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4534 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4535 `jmp' instead of just one of them.
4537 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4539 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4540 (fput_fp_reg_r): Renamed from fput_reg_r.
4541 (fput_fp_reg): New function.
4542 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4544 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4546 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4548 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4550 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4552 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4553 don't output a space.
4555 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4557 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4559 * mips-opc.c: New file, containing opcode table from
4560 ../include/opcode/mips.h.
4561 * Makefile.in: Add it.
4563 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4565 * m88k-dis.c: New file, moved in from gdb and changed to use the
4566 new dis-asm.h disassembler interface.
4567 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4568 (m88k-dis.o): New target.
4570 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4572 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4573 argument string const char * to correspond to opcode/mips.h.
4575 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4577 * mips-dis.c: Updated to account for name changes in new version
4579 * Makefile.in: Added header file dependencies.
4581 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4583 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4585 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4587 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4588 extend, rather than shifts.
4590 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4592 * Makefile.in: Undo 15 June change.
4594 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4596 * m68k-dis.c (print_insn_arg): Change return value to byte count
4598 * m68k-dis.c: Re-write to detect invalid operands before
4599 printing anything, so we can handle this the same way we
4600 handle invalid opcodes.
4602 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4604 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4606 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4608 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4611 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4613 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4615 * configure.in: Do make sysdep.h link.
4616 * Makefile.in: Search ../include. Don't search ../bfd.
4618 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4620 Changes from Jeff Law, law@cs.utah.edu:
4621 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4622 Do not print a space before the completers specified by
4625 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4627 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4628 defined, since gdb has been fixed.
4630 Changes from Jeff Law, law@cs.utah.edu:
4631 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4632 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4633 be a *disassemble_info, not a *FILE.
4634 * hppa-dis.c: Support 'd', '!', and 'a'.
4635 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4636 * hppa-dis.c: Delete cases which are no longer needed.
4638 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4640 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4642 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4644 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4647 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4649 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4650 * configure.in: No longer need to configure to get sysdep.h.
4652 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4654 * Patches from Jeffrey Law <law@cs.utah.edu>.
4655 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4656 templates for 1.1 FP computational instructions.
4658 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4660 * h8500-dis.c (print_insn_h8500): Address argument is type
4662 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4665 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4666 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4668 * sparc-dis.c (compare_opcodes): Move static declaration to
4671 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4673 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4674 instruction, remove unimp hack from 'l' argument.
4676 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4678 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4681 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4683 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4684 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4687 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4689 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4690 arrays of string pointers to 2-d arrays of chars, to save
4693 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4695 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4696 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4698 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4700 * hppa-dis.c: New file from Utah, adapted to new disassembler
4702 * Makefile.in: Include it.
4704 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4706 * sh-dis.c, sh-opc.h: New files.
4708 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4710 * alpha-dis.c, alpha-opc.h: New files.
4712 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4714 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4717 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4719 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4721 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4723 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4726 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4728 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4729 and double percent signs a few places.
4731 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4733 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4734 Use info->print_address_func not print_address.
4736 * dis-buf.c (generic_print_address): New function.
4738 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4740 * Makefile.in: Add sparc-dis.c.
4741 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4743 Add `add' instruction to the set that get checked
4744 for a preceding `sethi' in order to print an absolute address.
4745 * (print_insn): Disassembly prefers real instructions.
4746 (is_delayed_branch): Speed up.
4747 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4748 Still missing some float ops, and needs testing.
4749 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4750 F_ALIAS. Use printf, not fprintf, when not passing a file
4752 (compare_opcodes): Check that identical instructions have
4753 identical opcodes, complain otherwise.
4756 * Include reg_names.
4758 Use dis-asm.h/read_memory_func interface.
4760 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4762 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4763 deliberately return non-zero to setjmp from longjmp. Otherwise
4764 this code fails to compile.
4766 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4768 * m68k-dis.c: Fix prototype for fetch_arg().
4770 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4772 * dis-buf.c: New file, for new read_memory_func interface.
4773 Makefile.in (OFILES): Include it.
4774 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4775 Use new read_memory_func interface.
4777 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4779 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4780 * h8500-opc.h: Fix couple of opcodes.
4782 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4784 * Makefile.in: add dvi & installcheck targets
4786 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4788 * Makefile.in: Update for h8500-dis.c.
4790 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4792 * h8500-dis.c, h8500-opc.h: New files
4794 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4796 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4797 ../include/dis-asm.h.
4798 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4799 and ../gdb/m68k-pinsn.c).
4800 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4801 and ../gdb/i386-pinsn.c).
4802 * m68881-ext.c: New file. Moved definition of
4803 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4804 * Makefile.in: Adjust for new files.
4805 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4806 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4807 can be dis-assembled.
4809 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4811 * mips-dis.c (print_insn_arg): Now returns void.
4813 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4815 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4816 files that use the macros.
4818 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4820 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4821 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4822 (CFILES): Added mips-dis.c.
4824 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4826 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4827 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4829 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4831 * Makefile.in: Improve *clean rules.
4832 * configure.in: Allow a default host.
4834 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4836 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4837 files include other sysdep files
4839 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4841 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4843 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4845 * configure.in: For host support, use ../bfd/configure.host
4846 so it stays in sync with the ../bfd/hosts database.
4848 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4850 * configure.in: use cpu-vendor-os triple instead of nested cases
4852 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4854 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4855 *always* the wrong one.
4857 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4859 * z8kgen.c: added copyright info
4861 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4863 * z8k-dis.c (unparse_instr): prettier tabs
4864 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4866 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4868 * configure.in: Add ncr* configuration.
4869 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4870 picayune ANSI compilers happy.
4872 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4874 * configure.in (i386): Make i386 and i486 synonymous for now.
4875 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4877 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4879 * Makefile.in (install): Fix typo.
4881 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4883 * Makefile.in (make): Remove obsolete crud.
4884 (sparc-opc.o): Avoid Sun Make VPATH bug.
4886 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4888 * Makefile.in: since there are no SUBDIRS, remove rule and
4889 references of subdir_do.
4891 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4893 * Makefile.in (install): Get the library name right here too.
4894 Don't install bfd.h, since it's unrelated to this library. No
4895 subdirs to recurse into, either.
4896 (CFILES): The source file has a .c suffix, not .o.
4898 * sparc-opc.c: New file, moved from BFD.
4899 * Makefile.in (OFILES): Build it.
4901 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4903 * z8k-dis.c: fixed forward refferences of some declarations.
4905 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4907 * Makefile.in: get the name of the library right
4909 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4911 * z8k-dis.c: knows how to disassemble z8k stuff
4912 * z8k-opc.h: new file full of z8000 opcodes
4916 version-control: never
projects / deliverable / binutils-gdb.git / blob