1 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
6 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
8 From David Mosberger-Tang <davidm@azstarnet.com>
10 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
11 (alpha_insn_set): added definitions for VAX floating point
12 instructions (Unix compilers don't generate these, but handcoded
13 assembly might still use them).
15 * alpha-dis.c (print_insn_alpha): added support for disassembling
16 the miscellaneous instructions in the Alpha instruction set.
18 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
20 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
21 no longer create sysdep.h, sed ppc-opc.c to work around a
22 serious Metrowerks C bug.
23 * mpw-make.in: Remove.
24 * mpw-make.sed: New file, used by mpw-configure to edit
25 Makefile.in into an MPW makefile.
27 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
29 * Makefile.in (maintainer-clean): New synonym for realclean.
31 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
33 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
34 which use '0', '1', and '2' instead. Specify the proper size for
35 a pmove immediate operand. Correct the pmovefd patterns to be
36 moves to a register, not from a register.
37 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
39 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
41 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
42 %psr, %wim, %tbr as F_NOTV9.
44 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
46 * Makefile.in (Makefile): Just rebuild Makefile when running
48 (config.h, stamp-h): New targets.
49 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
50 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
54 * mips-opc.c: Change unaligned loads and stores with "t,A"
55 operands to use "t,A(b)".
58 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
60 * sh-dis.c (print_insn_shx): Add F_FR0 support.
63 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
65 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
66 until 3 instead of until 2.
68 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
70 * Makefile.in (ALL_CFLAGS): Define.
71 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
72 (MOSTLYCLEAN): Add config.log.
73 (distclean): Don't remove config.log.
74 * configure.in: Substitute HDEFINES.
78 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
80 * sh-opc.h (sh_arg_type): Add F_FR0.
81 (sh_table, case fmac): Add F_FR0 as first argument.
84 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
86 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
88 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
90 * sparc-dis.c: Remove all references to NO_V9.
92 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
94 * aclocal.m4: Just include ../bfd/aclocal.m4.
97 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
99 * sparc-dis.c (X_DISP19): Define.
100 (print_insn, case 'G'): Use it.
101 (print_insn, case 'L'): Sign extend displacement.
103 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
105 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
106 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
107 host_makefile_frag or frags.
108 * aclocal.m4: New file.
109 * configure: Rebuild.
110 * Makefile.in (INSTALL): Set to @INSTALL@.
111 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
112 (INSTALL_DATA): Set to @INSTALL_DATA@.
114 (AR_FLAGS): Set to rc rather than qc.
115 (CC): Define as @CC@.
116 (CFLAGS): Set to @CFLAGS@.
117 (@host_makefile_frag@): Remove.
118 (config.status): Remove dependency upon @frags@.
120 * configure.in: ../bfd/config.bfd now just sets shell variables.
121 Use them rather than looking through target Makefile fragments.
122 * configure: Rebuild.
125 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
127 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
130 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
132 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
133 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
136 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
137 (lookup_{name,value}): New functions.
138 (prefetch_table): New static local.
139 (sparc_{encode,decode}_prefetch): New functions.
140 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
143 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
145 * sh-opc.h: Add blank lines to improve readabililty of sh3e
149 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
151 * sh-dis.c: Correct comment on first line of file.
153 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
155 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
157 * sparc-opc.c (asi, membar): New static locals.
158 (sparc_{encode,decode}_{asi,membar}): New functions.
159 (sparc_opcodes, membar insn): Fix.
160 * sparc-dis.c (print_insn): Call sparc_decode_asi.
161 Support decoding of membar masks.
164 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
166 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
168 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
170 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
171 and likewise for the other branches. Add bhs as an alias for bcc,
172 and likewise for the size variants. Add dbhs as an alias for
176 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
178 * sh-opc.h (FP sts instructions): Update to match reality.
181 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
183 * m68k-dis.c: (fpcr_names): Add % before all register names.
184 (reg_names): Likewise.
185 (print_insn_arg): Don't explicitly print % before register names.
186 Add % before register names in static array names. In case 'r',
187 print data registers as `@(Dn)', not `Dn@'. When printing a
188 memory address, don't print @# before it.
189 (print_indexed): Change base_disp and outer_disp from int to
190 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
191 syntax. Sign extend 8 byte displacement correctly.
192 (print_base): Print using MIT syntax. Print zpc when appropriate.
193 Change parameter disp from int to bfd_vma.
195 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
199 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
201 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
202 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
203 * sh-opc.h (sh_arg_type): Add new operand types.
204 (sh_table): Add new opcodes from SH3E Floating Point ISA.
207 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
209 * Makefile.in (distclean): Remove generated file config.h.
211 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
213 * Makefile.in (distclean): Remove generated file config.h.
215 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
217 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
219 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
221 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
222 rather than numopcodes. Use m68k_opcodes rather than removed
223 opcode function. Don't check F_ALIAS.
224 (print_insn_arg): Change first parameter to be const char *.
225 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
226 (m68k-opc.o): New target.
227 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
228 * configure: Rebuild.
230 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
232 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
233 (opcode_bits, opcode_hash_table): New variables.
234 (opcodes_initialized): Renamed from opcodes_sorted.
235 (build_hash_table): New function.
236 (is_delayed_branch): Use hash table.
237 (print_insn): Renamed from print_insn_sparc, made static.
238 Build and use hash table. If !sparc64, ignore sparc64 insns,
239 and vice-versa if sparc64.
240 (print_insn_sparc, print_insn_sparc64): New functions.
241 (compare_opcodes): Move sparc64 opcodes to end.
242 Print commutative insns with constant second.
243 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
245 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
247 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
248 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
249 avoids printing a delay slot in a delay slot.
250 * sh-opc.h (sh_table): Fully bracket last entry.
252 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
254 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
256 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
258 * configure.in: Get host_makefile_frag from ${srcdir}.
260 * configure.in: Autoconfiscated. Check for string[s].h. Create
261 config.h from config.in. Don't set up sysdep.h link.
262 * sysdep.h: New file.
263 * configure, config.in: New files, generated from configure.in.
264 * Makefile.in: Updated to be processed autoconf-style.
265 (distclean): Keep sysdep.h. Remove config.log and config.cache.
266 (Makefile): Depend on config.status.
267 (config.status): New rule.
268 * configure.bat: Update Makefile substitutions.
270 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
272 * mips-opc.c (L1): Define.
273 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
274 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
277 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
279 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
280 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
281 have multiple add units but only a single logical unit.
283 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
284 shifted by 18, without any insertion or extraction function.
285 (insert_cr, extract_cr): Remove.
288 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
290 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
293 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
295 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
298 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
300 * mpw-config.in: Add sh and i386 configs, remove sparc config.
301 * sh-opc.h: Add copyright.
303 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
305 * Makefile.in (crunch-m68k): Delete extra target accidentally
306 checked in a while ago.
308 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
310 * sh-opc.h (sh_table): Add SH3 support.
312 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
314 * sh-opc.h: Added bsrf and braf.
316 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
318 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
319 bogus [ls]fm{ea,fd} patterns.
321 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
322 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
323 initialize it from memory. Make function static.
324 (print_insn_{big,little}_arm): New functions.
325 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
326 the correct endianness.
329 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
331 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
332 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
335 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
337 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
340 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
342 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
343 17th, so that it builds again using GCC as the compiler.
345 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
347 * mips-dis.c (print_insn_little_mips): Cast return value from
348 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
349 expects an unsigned long, and that might be fewer words of
350 argument storage (e.g., if bfd_vma is long long on a 32-bit
352 (print_insn_big_mips): Likewise with bfd_getb32 value.
353 (_print_insn_mips): Now static.
355 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
357 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
358 gcc memory hog problem with initializer is fixed.
361 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
363 * arc-opc.c (NULL): Define.
364 (arc_operands, insn fields u,s): Delete.
365 (arc_operands, insn fields a,b,c): Mark as signed.
366 (arc_opcodes): No longer const, links computed at run-time.
367 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
368 suffixes that affect the insn code.
369 (arc_opcodes): Resort table to macros are first.
370 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
371 (arc_opcodes, st [b] entry): Likewise.
372 (arc_opcodes, st [b,d] entry): Fix mask, value.
373 (arc_reg_names): Add entries for r29, r30, r31, r60.
374 (opcode_map, icode_map): New static globals.
375 (arc_opcode_init_tables): Initialize them.
376 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
377 (insert_shimmoffset): Signal error if register present.
379 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
382 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
384 Merge in support for Mac MPW as a host.
385 (Old change descriptions retained for informational value.)
387 * mpw-config.in (archname): Compute from the config.
388 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
390 * mpw-config.in (target_arch): Compute from canonical target.
391 (m68k, mips, powerpc, sparc): Add architectures.
392 * mpw-make.in (disassemble.c.o): Add.
393 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
395 * mpw-config.in (BFD_MACHINES): Set to a default value.
396 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
398 * mpw-make.in (CSEARCH): Add extra-include to search path.
400 * mpw-config.in (varargs.h): Don't create.
401 (sysdep.h): Create using forward-include.
402 * mpw-make.in (CSEARCH): Add include/mpw to search path.
404 * mpw-config.in: New file, MPW version of configure.in.
405 * mpw-make.in: New file, MPW version of Makefile.in.
408 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
410 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
411 Call arc_get_opcode_mach to map bfd mach number to opcode value.
412 (print_insn_*): Pass bfd mach number, not opcode version.
413 * arc-opc.c (arc_get_opcode_mach): New function.
416 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
418 * alpha-dis.c (print_insn_alpha): Put empty statement after
421 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
423 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
424 (low_sign_extend): Likewise.
425 (get_field): Delete unused function.
426 (set_field, deposit_14, deposit_21): Likewise.
428 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
430 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
433 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
435 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
437 * alpha-opc.h (OSF_ASMCODE): define
438 print pal-code names as defined in App C of the
439 Alpha Architecture Reference Manual
441 * alpha-dis.c: cleaned up output
442 print stylized code forms as defined in App A.4.3 of the
443 Alpha Architecture Reference Manual
445 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
447 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
449 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
452 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
454 * m68k-dis.c (opcode): New function. Returns address of opcode
455 table entry given index, even if the opcode table was split to
456 work around gcc bugs.
457 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
459 (BREAK_UP_BIG_DECL): Make secondary array static and const.
460 (reg_names): Now const.
461 (print_insn_arg): Arrays cacheFieldName and names now const.
462 (print_indexed): Array scales now const.
465 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
467 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
468 (print_insn_arc_{host,graphics,audio}): Likewise.
469 (print_insn): Add prototype.
470 (arc_get_disassembler): New arg `big_p'. Return little or big
471 print fn accordingly.
472 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
473 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
474 (arc_opval_supported): Likewise.
475 * disassemble.c (disassembler): Pass big endian flag to
476 arc_get_disassembler.
479 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
481 * ppc-opc.c: Sort recently added instructions by minor opcode
482 number within major opcode number.
484 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
486 * hppa-dis.c: Include libhppa.h.
488 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
490 * mips-opc.c: Change dli to use M_DLI, and add dla.
492 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
494 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
497 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
499 * arc-dis.c (arc_get_disassembler): Change argument to int,
500 one of bfd_mach_arc_xxx. All callers updated.
503 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
505 * mips-opc.c: Add r4650 mul instruction.
507 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
509 * mips-opc.c: Add uld and usd macros for unaligned double load and
512 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
514 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
515 mfdcr, mtdcr, icbt, iccci.
518 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
520 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
521 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
522 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
523 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
524 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
525 (insert_absaddr): New function.
527 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
529 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
530 New argument `cpu', pass it to arc_opcode_init_tables.
531 Document byte order dependencies. Ignore unsupported insns.
532 (arc_get_disassembler): New function.
533 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
534 print_insn_arc_audio): New functions.
535 * arc-opc.c (MULTSHIFT operand): Delete.
536 (UNSIGNED, SATURATION): New operands.
537 (mac, mul, mul64, mulu64): New insns.
538 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
539 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
540 (host,graphics,audio extended and auxiliary regs): Define.
541 (ss, sc, mh, ml): New suffixes.
542 (arc_opcode_supported, arc_opval_supported): New functions.
543 (insert_multshift, extract_multshift): Deleted.
544 * disassemble.c (disassembler, case bfd_arch_arc): Call
545 arc_get_disassembler to get disassembler routine.
548 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
550 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
551 signed char fields to shorts, more portable.
553 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
555 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
556 char fields as signed chars, since they may have negative values.
558 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
560 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
561 (mycroft@netbsd.org).
563 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
565 From "Logg, Ed" <elogg@ea.com>:
566 * ppc-opc.c (extract_bdm): Correct parenthezisation.
567 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
570 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
572 * ppc-opc.c: Changes based on patch from David Edelsohn
573 <edelsohn@mhpcc.edu>.
574 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
577 (insert_tbr): New static function.
578 (extract_tbr): New static function.
579 (XFXFXM_MASK, XFXM): Define.
580 (XSPRBAT_MASK, XSPRG_MASK): Define.
581 (powerpc_opcodes): Add instructions to access special registers by
582 name. Add mtcr and mftbu.
584 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
586 * mips-opc.c (P3): Define.
587 (mips_opcodes): Add mad and madu.
589 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
591 * configure.in: Add W65 support.
592 * disassemble.c: Likewise.
593 * w65-opc.h, w65-dis.c: New files.
595 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
597 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
601 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
603 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
605 * arc-opc.c (extract_reladdr): New function.
606 (insert_reladdr): Store address right-shifted by 2.
609 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
611 * mips-opc.c: Add dli as a synonym for li.
614 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
616 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
618 (extraction fns): Insn argument now array of two words. Return pointer
619 to value's table entry. All uses changed.
620 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
621 (insert_multshift, extract_multshift): New fns.
622 (arc_operands): Add support for cache bypass suffix. Add support for
623 predefined aux regs. Modifier bits moved to flags field.
624 (arc_opcodes): Likewise.
625 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
626 New insn rlc. Update to syntax in programmer's manual.
627 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
628 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
630 (arc_opcode_init_tables): New argument to indicate cpu type.
631 (insert_reg): Handle predefined aux regs.
632 (extract_reg): Likewise.
633 (lookup_register): New fn.
634 * arc-dis.c (arc_condition_codes): Deleted.
635 (print_insn_arc): Handle insns with 32 bit immediate constants better.
636 Clean up modifier handling. Handle predefined aux regs.
639 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
641 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
642 print something for reserved opcode values, even if it won't
645 * mips-dis.c (_print_insn_mips): When initializing, shift right
646 and mask, to avoid sign extension problems on the Alpha.
648 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
652 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
654 * configure.in: Add ARC support.
655 * disassemble.c: Likewise.
656 * arc-dis.c, arc-opc.c: New files.
659 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
661 * sh-opc.h (mov.l gbr): Get direction right.
662 * sh-dis.c (print_insn_shx): New function.
663 (print_insn_shl, print_insn_sh): Call print_insn_shx to
664 print opcodes with right byte order.
666 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
668 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
669 to avoid conflicts with getopt.
671 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
673 * hppa-dis.c (print_insn_hppa): Read the instruction using
674 bfd_getb32, so that it works on a little endian or 64 bit host.
675 Remove unused local variable op.
677 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
679 * mips-opc.c: Use or instead of addu for pseudo-op move, since
680 addu does not work correctly if -mips3.
682 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
684 * a29k-dis.c (print_special): Add special register names defined
685 on 29030, 29040 and 29050.
686 (print_insn): Handle new operand type 'I'.
688 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
690 * Makefile.in (INSTALL): Use top level install.sh script.
692 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
694 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
695 that it works on a little endian host.
697 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
699 * configure.in: Use ${config_shell} when running config.bfd.
701 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
703 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
705 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
707 * a29k-dis.c (print_insn): Print the opcode.
709 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
711 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
713 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
715 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
717 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
719 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
720 which store a value into memory.
722 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
724 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
725 * arm-dis.c, arm-opc.h: New files.
727 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
729 * Makefile.in (ns32k-dis.o): Add dependency.
730 * ns32k-dis.c (print_insn_arg): Declare initialized local as
731 string, not as array of chars.
733 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
735 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
737 * sparc-opc.c: Added sparclite extended FP operations, and
738 versions of v9 impdep* instructions permitting specification of
741 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
743 * i960-dis.c (reg_names): Now const.
744 (struct sparse_tabent): New type, copied from array type in mem
746 (ctrl): Local static array ctrl_tab now const.
747 (cobr): Local static array cobr_tab now const.
748 (mem): Local variables reg1, reg2, reg3 now point to const. Local
749 static variable mem_tab no longer explicitly initialized. Changed
750 mem_init to const array of struct sparse_tabent.
751 (reg): Local static variable reg_tab no longer explicitly
752 initialized. Changed reg_init to const array of struct
754 (ea): Local static array scale_tab now const.
756 start-sanitize-i960xl
757 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
761 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
763 * configure.bat: the disassember needs to be enabled for
764 "objdump -d" to work in djgpp.
766 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
768 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
769 (invalid_float): Enabled general version, doesn't require running
770 on ns32k host. Changed to take char* argument, and test for
771 explicitly specified sizes, instead of using sizeof() on host CPU
773 (INVALID_FLOAT): Cast first argument.
774 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
775 list_P032, list_M032): Now const.
776 (optlist, list_search): Made appropriate arguments now point to
778 (print_insn_arg): Changed static array of one-character-string
779 pointers into a static const array of characters; fixed sprintf
780 statement accordingly.
782 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
784 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
785 from distribution. A ns32k-dis.c from a previous distribution has
786 been brought up to date and supports the new interface.
788 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
790 * configure.in: add bfd_ns32k_arch target support.
792 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
793 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
795 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
797 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
800 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
802 * h8300-dis.c, mips-dis.c: Don't use true and false.
804 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
806 * configure.in: Change --with-targets to --enable-targets.
808 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
810 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
811 opcodes to the first instruction with that opcode, to speed
812 disassembly of large files. From ralphc@pyramid.com (Ralph
815 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
817 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
819 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
821 * configure.bat: update to latest makefile.in
823 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
825 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
826 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
827 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
828 slot insn is in a delay slot.
829 * z8k-opc.h: (resflg): Fix patterns.
830 * h8500-opc.h Fix CR insn patterns.
832 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
834 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
835 "cmpl" before POWER versions, so that gas -many uses them.
837 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
839 * disassemble.c: New file.
840 * Makefile.in (OFILES): Add disassemble.o.
841 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
842 * configure.in: Define ARCHDEFS in Makefile. Code taken from
843 binutils/configure.in.
845 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
846 opcode being examined.
848 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
850 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
851 (insert_ral, insert_ram, insert_ras): New functions.
852 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
853 RAS for store with update.
855 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
857 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
858 (edelsohn@npac.syr.edu).
860 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
862 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
865 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
867 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
869 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
871 * ppc-opc.c (powerpc_operands): The signedp field has been
872 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
873 instead. Add new operand SISIGNOPT.
874 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
875 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
876 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
879 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
881 * i386-dis.c (struct private): Renamed to dis_private. `private'
882 is a reserved word for dynix cc.
884 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
886 * configure.in: Change error message to refer to bfd/config.bfd
887 rather than bfd/configure.in.
889 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
891 * ppc-opc.c: Define POWER2 as short alias flag.
892 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
895 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
897 * i960-dis.c (print_insn_i960): Don't read a second word for
898 opcodes 0, 1, 2 and 3.
900 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
902 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
904 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
906 * m68881-ext.c: Removed; no longer used.
907 * Makefile.in: Changed accordingly.
909 * m68k-dis.c (ext_format_68881): Don't declare.
910 (print_insn_m68k): If an instruction uses place 'i', it uses at
911 least four fixed bytes.
912 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
913 extended float, convert to double using floatformat_to_double, not
914 ieee_extended_to_double, and fetch the data before converting it.
916 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
918 * mips-opc.c: It's sqrt.s, not sqrt.w. From
919 davidj@ICSI.Berkeley.EDU (David Johnson).
921 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
923 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
924 PowerPC uses bdnz[l][a].
926 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
928 * dis-buf.c, i386-dis.c: Include sysdep.h.
930 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
932 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
934 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
935 by Motorola PowerPC 601 with PPC_OPCODE_601.
936 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
937 Disassemble Motorola PowerPC 601 instructions as well as normal
938 PowerPC instructions.
940 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
942 * i960-dis.c (reg, mem): Just use a static array instead of
945 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
947 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
948 condition name index if this is for a negated condition.
950 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
951 Floating point format for 'H' operand is backwards from normal
952 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
953 operands (fmpyadd and fmpysub), handle bizarre register
954 translation correctly for single precision format.
956 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
957 or 'I' operands if the next format specifier is 'M' (fcmp
958 condition completer).
960 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
962 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
963 single number giving a bitmask for the MB and ME fields of an M
964 form instruction. Change NB to accept 32, and turn it into 0;
965 also turn 0 into 32 when disassembling. Seperated SH from NB.
966 (insert_mbe, extract_mbe): New functions.
967 (insert_nb, extract_nb): New functions.
968 (SC_MASK): Mask out SA and LK bits.
969 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
970 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
971 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
972 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
973 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
974 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
975 (powerpc_macros): Define table of macro definitions.
976 (powerpc_num_macros): Define.
978 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
979 if PPC_OPERAND_NEXT is set.
981 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
983 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
984 char. Retrieve contents using bfd_getl32 instead of shifting.
986 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
988 * ppc-opc.c: New file. Opcode table for PowerPC, including
989 opcodes for POWER (RS/6000).
990 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
991 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
992 (CFILES): Add ppc-dis.c.
993 (ppc-dis.o, ppc-opc.o): New targets.
994 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
996 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
998 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
999 No space before 'u', 'f', or 'N'.
1001 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1003 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1004 farther than we should.
1006 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1008 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1010 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1012 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1014 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1015 needs it, to prevent reading past the end of a section.
1017 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1019 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1020 Removed t,A case for la; always use t,A(b) case.
1022 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1024 From Ted Lemen <mellon@pepper.ncd.com>
1025 * mips-dis.c (print_insn_arg): Handle 'k'.
1026 * mips-opc.c: Make cache use k, not t.
1028 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1030 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1031 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1032 FLOAT_FORMAT_CODE to put out floating point register names.
1034 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1036 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1038 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1040 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1042 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1044 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1045 larger than 32. Moved dsxx32 variants first for disassembler.
1047 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1049 * z8kgen.c, z8k-opc.h: Add full lda information.
1051 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1053 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1054 movb instructions. Any necessary space will be emitted by
1055 the code to handle nullification completers.
1057 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1059 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1061 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1063 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1064 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1066 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1068 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1070 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1072 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1073 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1075 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1077 * m88k-dis.c (m88kdis): comment change. Remove space after
1079 (printop): handle new arg types DEC and XREG for m88110.
1081 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1083 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1084 type for absolute branch addresses. Delete special
1085 "ble" and "be" code in 'W' operand code.
1087 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1089 * mips-opc.c: Set hazard information correctly for branch
1090 likely instructions.
1092 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1094 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1095 info->fprintf_func for printing and info->print_address_func for
1098 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1100 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1102 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1104 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1105 Corrected second case of "b" for disassembler.
1107 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1109 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1110 to BFD swapping routines to correspond to BFD name changes.
1112 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1114 * mips-opc.c: Change div machine instruction to be z,s,t rather
1115 than s,t. Change div macro to be d,v,t rather than d,s,t.
1116 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1117 rem and remu which generates only the corresponding div
1118 instruction. This is for compatibility with the MIPS assembler,
1119 which only generates the simple machine instruction when an
1120 explicit destination of $0 is used.
1121 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1123 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1125 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1126 WR_31 hazard for bal, bgezal, bltzal.
1128 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1130 * hppa-dis.c (print_insn_hppa): Use print function
1131 from within the disassemble_info, not fprintf_filtered.
1133 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1135 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1136 Law, law@cs.utah.edu.)
1138 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1140 * mips-opc.c ("absu"): Removed.
1143 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1145 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1146 Changed hazard information to distinguish between memory load
1147 delays and coprocessor load delays.
1149 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1151 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1153 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1155 * configure.in: Don't pass cpu to config.bfd.
1157 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1159 * m88k-dis.c (m88kdis): Make class unsigned.
1161 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1163 * alpha-dis.c (print_insn_alpha): One branch format case was
1164 missing the instruction name.
1166 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1168 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1169 Add the arch-specific auxiliary files.
1170 (OFILES): Remove the arch-specific auxiliary files
1171 and use BFD_MACHINES instead of DIS_LIBS.
1172 * configure.in: Set BFD_MACHINES based on --with-targets option.
1174 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1176 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1179 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1181 * sparc-opc.c: Change CONST to const to deal with gcc
1182 -Dconst=__const -traditional.
1184 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1186 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1187 coprocessor instructions out of #if 0, and made them use new
1190 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1192 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1194 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1196 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1197 instruction, for use by the disassembler.
1199 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1200 hand-coded sign extensions that depended on 32-bit host ints.
1201 FIXME, we still depend on big-endian host bitfield ordering.
1202 (sparc_print_insn): Set the insn_info_valid field, and the
1203 other fields that describe the instruction being printed.
1205 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1207 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1208 `jmp' instead of just one of them.
1210 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1212 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1213 (fput_fp_reg_r): Renamed from fput_reg_r.
1214 (fput_fp_reg): New function.
1215 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1217 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1219 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1221 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1223 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1225 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1226 don't output a space.
1228 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1230 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1232 * mips-opc.c: New file, containing opcode table from
1233 ../include/opcode/mips.h.
1234 * Makefile.in: Add it.
1236 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1238 * m88k-dis.c: New file, moved in from gdb and changed to use the
1239 new dis-asm.h disassembler interface.
1240 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1241 (m88k-dis.o): New target.
1243 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1245 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1246 argument string const char * to correspond to opcode/mips.h.
1248 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1250 * mips-dis.c: Updated to account for name changes in new version
1252 * Makefile.in: Added header file dependencies.
1254 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1256 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1258 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1260 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1261 extend, rather than shifts.
1263 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1265 * Makefile.in: Undo 15 June change.
1267 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1269 * m68k-dis.c (print_insn_arg): Change return value to byte count
1271 * m68k-dis.c: Re-write to detect invalid operands before
1272 printing anything, so we can handle this the same way we
1273 handle invalid opcodes.
1275 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1277 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1279 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1281 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1284 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1286 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1288 * configure.in: Do make sysdep.h link.
1289 * Makefile.in: Search ../include. Don't search ../bfd.
1291 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1293 Changes from Jeff Law, law@cs.utah.edu:
1294 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1295 Do not print a space before the completers specified by
1298 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1300 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1301 defined, since gdb has been fixed.
1303 Changes from Jeff Law, law@cs.utah.edu:
1304 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1305 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1306 be a *disassemble_info, not a *FILE.
1307 * hppa-dis.c: Support 'd', '!', and 'a'.
1308 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1309 * hppa-dis.c: Delete cases which are no longer needed.
1311 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1313 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1315 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1317 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1320 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1322 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1323 * configure.in: No longer need to configure to get sysdep.h.
1325 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1327 * Patches from Jeffrey Law <law@cs.utah.edu>.
1328 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1329 templates for 1.1 FP computational instructions.
1331 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1333 * h8500-dis.c (print_insn_h8500): Address argument is type
1335 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1338 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1339 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1341 * sparc-dis.c (compare_opcodes): Move static declaration to
1344 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1346 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1347 instruction, remove unimp hack from 'l' argument.
1349 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1351 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1354 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1356 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1357 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1360 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1362 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1363 arrays of string pointers to 2-d arrays of chars, to save
1366 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1368 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1369 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1371 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1373 * hppa-dis.c: New file from Utah, adapted to new disassembler
1375 * Makefile.in: Include it.
1377 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1379 * sh-dis.c, sh-opc.h: New files.
1381 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1383 * alpha-dis.c, alpha-opc.h: New files.
1385 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1387 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1390 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1392 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1394 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1396 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1399 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1401 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1402 and double percent signs a few places.
1404 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1406 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1407 Use info->print_address_func not print_address.
1409 * dis-buf.c (generic_print_address): New function.
1411 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1413 * Makefile.in: Add sparc-dis.c.
1414 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1416 Add `add' instruction to the set that get checked
1417 for a preceding `sethi' in order to print an absolute address.
1418 * (print_insn): Disassembly prefers real instructions.
1419 (is_delayed_branch): Speed up.
1420 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1421 Still missing some float ops, and needs testing.
1422 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1423 F_ALIAS. Use printf, not fprintf, when not passing a file
1425 (compare_opcodes): Check that identical instructions have
1426 identical opcodes, complain otherwise.
1429 * Include reg_names.
1431 Use dis-asm.h/read_memory_func interface.
1433 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1435 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1436 deliberately return non-zero to setjmp from longjmp. Otherwise
1437 this code fails to compile.
1439 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1441 * m68k-dis.c: Fix prototype for fetch_arg().
1443 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1445 * dis-buf.c: New file, for new read_memory_func interface.
1446 Makefile.in (OFILES): Include it.
1447 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1448 Use new read_memory_func interface.
1450 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1452 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1453 * h8500-opc.h: Fix couple of opcodes.
1455 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1457 * Makefile.in: add dvi & installcheck targets
1459 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1461 * Makefile.in: Update for h8500-dis.c.
1463 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1465 * h8500-dis.c, h8500-opc.h: New files
1467 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1469 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1470 ../include/dis-asm.h.
1471 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1472 and ../gdb/m68k-pinsn.c).
1473 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1474 and ../gdb/i386-pinsn.c).
1475 * m68881-ext.c: New file. Moved definition of
1476 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1477 * Makefile.in: Adjust for new files.
1478 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1479 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1480 can be dis-assembled.
1482 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1484 * mips-dis.c (print_insn_arg): Now returns void.
1486 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1488 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1489 files that use the macros.
1491 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1493 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1494 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1495 (CFILES): Added mips-dis.c.
1497 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1499 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1500 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1502 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1504 * Makefile.in: Improve *clean rules.
1505 * configure.in: Allow a default host.
1507 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1509 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1510 files include other sysdep files
1512 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1514 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1516 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1518 * configure.in: For host support, use ../bfd/configure.host
1519 so it stays in sync with the ../bfd/hosts database.
1521 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1523 * configure.in: use cpu-vendor-os triple instead of nested cases
1525 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
1527 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1528 *always* the wrong one.
1530 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1532 * z8kgen.c: added copyright info
1534 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1536 * z8k-dis.c (unparse_instr): prettier tabs
1537 * z8kgen.c -> z8k-opc.h: bug fixes in tables
1539 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
1541 * configure.in: Add ncr* configuration.
1542 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
1543 picayune ANSI compilers happy.
1545 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
1547 * configure.in (i386): Make i386 and i486 synonymous for now.
1548 * configure.in (i[34]86-*-sysv4): Add my_host definition.
1550 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1552 * Makefile.in (install): Fix typo.
1554 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
1556 * Makefile.in (make): Remove obsolete crud.
1557 (sparc-opc.o): Avoid Sun Make VPATH bug.
1559 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
1561 * Makefile.in: since there are no SUBDIRS, remove rule and
1562 references of subdir_do.
1564 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1566 * Makefile.in (install): Get the library name right here too.
1567 Don't install bfd.h, since it's unrelated to this library. No
1568 subdirs to recurse into, either.
1569 (CFILES): The source file has a .c suffix, not .o.
1571 * sparc-opc.c: New file, moved from BFD.
1572 * Makefile.in (OFILES): Build it.
1574 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
1576 * z8k-dis.c: fixed forward refferences of some declarations.
1578 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
1580 * Makefile.in: get the name of the library right
1582 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1584 * z8k-dis.c: knows how to disassemble z8k stuff
1585 * z8k-opc.h: new file full of z8000 opcodes
1589 version-control: never