1 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
3 sh-opc.h (sh_table): Remove ftst/nan.
6 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
8 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
9 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
11 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
15 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
17 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
18 Add tx49 insns and configury.
21 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
23 * mips-opc.c (ffc, ffs): Fix mask.
26 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
28 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
32 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
34 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
36 Added VR5400 instructions.
37 (N5): New cpu-id macro.
39 (WR_HILO, RD_HILO, MOD_HILO): New macros.
41 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
43 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
44 (WR_HILO, RD_HILO, MOD_HILO): New macros.
46 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
48 * v850-dis.c (disassemble): Replace // with /* ... */
50 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
52 * sparc-opc.c: Add wr & rd for v9a asr's.
53 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
54 (v9a_asr_reg_names): New variable.
55 Patch from David Miller <davem@vger.rutgers.edu>.
57 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
59 * sparc-opc.c (v9notv9a): New insn type.
60 (IMPDEP): Move to the end to not conflict with edge8 et al.
61 Patch from David Miller <davem@vger.rutgers.edu>.
63 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
65 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
67 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
69 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
71 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
73 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
74 of disassemble_info structure to determine if an overlay address
75 has a matching symbol in low memory.
77 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
78 new symbol_at_address_func field in disassemble_info structure.
80 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
82 * v850-opc.c (extract_d22): Use signed arithmatic.
84 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
86 * mips-opc.c: Three op mult is not an ISA insn.
88 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
90 * mips-opc.c: Fix formatting.
92 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
94 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
95 than assuming that char is signed. Explicitly sign extend 16 bit
96 values, rather than assuming that short is 16 bits.
97 (OP_sI, OP_J, OP_DIR): Likewise.
100 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
102 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
106 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
108 * v850-opc.c: Fix typo in comment.
110 * v850-dis.c (disassemble): Add test of processor type when
113 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
115 * configure.in: Use a diversion to set enable_shared before the
116 arguments are parsed.
117 * configure: Rebuild.
119 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
121 * m68k-opc.c (TBL1): Use ! rather than `.
122 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
124 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
126 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
128 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
130 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
133 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
134 * aclocal.m4: Rebuild with new libtool.
135 * configure: Rebuild.
138 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
140 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
143 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
145 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
147 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
149 * v850-opc.c (v850_opcodes): Further rearrangements.
152 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
154 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
157 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
159 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
162 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
164 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
166 * mips16-opc.c: Added mips16 sdbbp.
169 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
171 * v850-opc.c: Initialise processors field of v850_opcode structure.
174 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
176 Merge changes from Martin Hunt:
178 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
180 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
181 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
182 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
184 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
186 * d30v-dis.c (print_insn): First operand of d*i (delayed
187 branch) instructions is relative.
189 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
190 (d30v_operand_table): Add IMM6S3 type.
191 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
193 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
194 and cmp instructions.
196 * d30v-opc.c: Correct entries for repeat*, and sat*.
197 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
198 types. Correct several formats.
200 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
202 * d30v-opc.c (pre_defined_registers): Change control registers.
204 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
205 SHORT_C2. Manual was incorrect.
207 * d30v-dis.c (lookup_opcode): Return value now indicates
208 if an opcode has a short and a long form. Used for deciding
209 to append a ".s" or ".l".
210 (print_insn): Append a ".s" to an instruction if it is
211 the short form and ".l" if it is a long form. Do not append
212 anything if the instruction has only one possible size.
214 * d30v-opc.c: Change mulx2h to require an even register.
215 New form: SHORT_A2; a SHORT_A form that needs an even
216 register as the first operand.
218 * d30v-dis.c (print_insn_d30v): Fix problem where the last
219 instruction was not being disassembled if there were an odd
220 number of instructions.
222 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
226 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
228 * v850-dis.c (disassemble): Improved display of register lists.
231 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
233 * sparc-opc.c (sparc_opcodes): Fix assembler args to
234 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
235 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
236 fandnot1s, fandnot2s.
238 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
240 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
242 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
244 * cgen-asm.c (cgen_parse_address): New argument resultp.
246 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
248 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
250 * mn10200-dis.c (disassemble): PC relative instructions are
251 relative to the next instruction, not the current instruction.
253 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
255 * v850-dis.c (disassemble): Only signed extend values that are not
256 returned by extract functions.
257 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
259 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
261 * v850-opc.c: Update comments. Remove use of
262 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
264 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
266 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
268 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
270 * configure: Rebuilt with latest devo autoconf for NT support.
272 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
274 * v850-dis.c (disassemble): Use curly brace syntax for register
277 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
278 where r0 is being used as a destination register.
281 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
283 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
287 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
289 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
290 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
291 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
292 Add insns to access SGR and DBR.
293 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
296 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
298 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
301 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
303 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
304 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
307 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
309 * configure (cgen_files): Add support for v850e target.
310 * configure.in (cgen_files): Add support for v850e target.
312 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
314 * configure (cgen_files): Add support for v850eq target.
315 * configure.in (cgen_files): Add support for v850eq target.
318 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
320 * configure.in (bfd_arc_arch): Add.
321 * configure: Rebuild.
322 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
323 * Makefile.in: Rebuild.
324 * arc-dis.c, arc-opc.c: New files.
325 * disassemble.c (ARCH_all): Define ARCH_arc.
326 (disassembler): Add ARC support.
328 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
331 * v850-dis.c (disassemble): Add support for v850EQ instructions.
333 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
334 (v850_opcodes): Add v850EQ instructions.
336 * v850-dis.c (disassemble): Add support for v850E instructions.
338 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
339 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
340 insert_spe, extract_spe): New Functions.
341 (v850_opcodes): Add v850E instructions.
344 * v850-opc.c: Reorganised and re-layed out to improve readability
347 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
349 * configure: Rebuild with autoconf 2.12.1.
351 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
353 * aclocal.m4, configure: Rebuild with new automake patches.
355 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
357 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
358 * acinclude.m4: Just include acinclude.m4 from BFD.
359 * aclocal.m4, configure: Rebuild.
361 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
363 * Makefile.am: New file, based on old Makefile.in.
364 * acconfig.h: New file.
365 * acinclude.m4: New file.
366 * stamp-h.in: New file.
367 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
368 Removed shared library handling; now handled by libtool. Replace
369 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
370 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
371 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
372 handling in AC_OUTPUT.
373 * dep-in.sed: Change .o to .lo.
374 * Makefile.in: Now built with automake.
375 * aclocal.m4: Now built with aclocal.
376 * config.in, configure: Rebuild.
378 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
380 * mips-opc.c: Fix typo/thinko in "eret" instruction.
383 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
385 * mips-opc.c: Fix coding of mtsa.
388 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
390 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
392 * sparc-dis.c (sorted_opcodes): New static local.
393 (struct opcode_hash): `opcode' is pointer to const element.
394 (build_hash): First arg is now table of sorted pointers.
395 (print_insn_sparc): Sort opcodes by sorting table of pointers.
396 (compare_opcodes): Update.
398 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
400 * cgen-opc.c: #include <ctype.h>.
401 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
402 Handle case insensitive hashing.
403 (hash_keyword_value): Change type of `value' to unsigned int.
405 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
407 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
408 precision FP, mark it as such. Likewise for double precision
409 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
412 (mips_builtin_opcodes): Remove non-existant r5900 instructions
416 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
418 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
419 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
422 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
424 * ppc-opc.c (extract_nsi): make unsigned expression signed before
426 (UNUSED): remove one level of parens, so MSVC doesn't choke on
427 nesting depth when all the macros are expanded.
429 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
431 * sparc-opc.c: The fcmp v9a instructions take an integer register
432 as a destination, not a floating point register. From Christian
433 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
435 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
437 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
438 syntax. From Roman Hodek
439 <rnhodek@faui22c.informatik.uni-erlangen.de>.
441 * i386-dis.c (twobyte_has_modrm): Fix pand.
443 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
445 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
447 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
449 * arm-dis.c: Add prototypes for arm_decode_shift and
452 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
454 * mips-opc.c: Add r3900 insns.
456 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
458 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
459 print delay slot instructions on the same line. When using a PC
460 relative load, add a comment with the value being loaded if it can
463 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
465 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
466 to pushS/popS for segment regs and byte constant so that
467 pushw/popw printed when in 16 bit data mode.
469 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
470 print cbtw, cwtd in 16 bit data mode.
471 * i386-dis.c (putop): extra case W to support above.
473 * i386-dis.c (print_insn_x86): print addr32 prefix when given
474 address size prefix in 16 bit address mode.
476 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
478 * sh-dis.c: Reindent. Rename local variable fprintf to
481 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
483 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
485 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
487 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
489 * mips16-opc.c (mip16_opcodes): same.
491 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
493 * m68k-opc.c (moveb): Change $d to %d.
495 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
497 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
498 (twobyte_has_modrm): Likewise.
500 (OP_MMX, OP_EM, OP_MS): New static functions.
502 * i386-dis.c: Revert patch of April 4. The output now matches
505 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
507 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
510 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
512 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
514 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
516 * Makefile.in (install): Depend upon installdirs.
517 (installdirs): New target.
519 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
521 From Thomas Graichen <graichen@rzpd.de>:
522 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
523 * configure: Rebuild.
525 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
527 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
528 Delete string{,s}.h support.
530 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
532 * cgen-asm.c (cgen_parse_operand_fn): New global.
533 (cgen_parse_{{,un}signed_integer,address}): Update call to
534 cgen_parse_operand_fn.
535 (cgen_init_parse_operand): New function.
536 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
537 from cgen_asm_init_parse.
538 (m32r_cgen_assemble_insn): New operand `errmsg'.
539 Delete call to as_bad, return error message to caller.
540 (m32r_cgen_asm_hash_keywords): #if 0 out.
542 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
544 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
546 [case 'J']: Fix typo in register name.
548 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
550 * configure.in: Substitute SHLIB_LIBS.
551 * configure: Rebuild.
552 * Makefile.in (SHLIB_LIBS): New variable.
553 ($(SHLIB)): Use $(SHLIB_LIBS).
555 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
557 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
559 * cgen-opc.c (hash_keyword_name): Improve algorithm.
561 * disassemble.c (disassembler): Handle m32r.
563 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
565 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
566 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
567 * Makefile.in (CFILES): Add them.
568 (ALL_MACHINES): Add them.
569 (dependencies): Regenerate.
570 * configure.in (cgen_files): New variable.
571 (bfd_m32r_arch): Add entry.
572 * configure: Regenerate.
574 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
576 * configure.in: Correct file names for bfd_mn10[23]00_arch.
577 * configure: Rebuild.
579 * Makefile.in: Rebuild dependencies.
581 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
583 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
586 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
588 * Branched binutils 2.8.
590 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
592 * m10200-dis.c: Rename from mn10200-dis.c.
593 * m10200-opc.c: Rename from mn10200-opc.c.
594 * m10300-dis.c: Rename from mn10300-dis.c
595 * m10300-opc.c: Rename from mn10300-opc.c.
596 * Makefile.in: Update accordingly.
598 * mips16-opc.c: Add mul and dmul macros.
600 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
602 * makefile.vms: Update CFLAGS, add clean target.
604 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
606 * mips-opc.c: Add "wait". From Ralf Baechle
607 <ralf@gnu.ai.mit.edu>.
609 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
610 * configure, config.in: Rebuild.
611 * sysdep.h: Include <stdlib.h> if it exists.
612 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
614 * Makefile.in: Rebuild dependencies.
616 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
618 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
619 Andrew Bray <andy@madhouse.demon.co.uk>.
621 * mips-opc.c: Add cast when setting mips_opcodes.
623 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
625 * v850-dis.c (disassemble): Fix sign extension problem.
626 * v850-opc.c (extract_d*): Fix sign extension problems to make
627 disassembly calculate branch offsets correctly.
629 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
631 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
633 * mips-opc.c: Add dctr and dctw.
636 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
638 * d30v-dis.c (print_insn): Change the way signed constants
641 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
643 * Makefile.in (BFD_H): New variable.
644 (HFILES): New variable.
645 (CFILES): Add all C files.
646 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
647 Delete old dependencies, and build new ones.
648 * dep-in.sed: New file.
650 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
652 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
654 start-sanitize-coldfire
655 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
657 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
660 end-sanitize-coldfire
661 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
663 * mn10200-opc.c: Change "trap" to "syscall".
664 * mn10300-opc.c: Add new "syscall" instruction.
666 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
668 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
669 mulul insns on the coldfire.
671 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
673 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
674 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
675 (print_insn_little_arm): Likewise.
677 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
679 Based on patches from H.J. Lu <hjl@lucon.org>:
680 * i386-dis.c (fetch_data): Add prototype.
681 * m68k-dis.c (fetch_data): Add prototype.
682 (dummy_print_address): Add prototype. Make static.
683 * ppc-opc.c (valid_bo): Add prototype.
684 * sparc-dis.c (build_hash_table): Add prototype.
685 (is_delayed_branch, compute_arch_mask): Add prototypes.
686 (print_insn_sparc): Make several local variables const.
687 (compare_opcodes): Change arguments to const PTR. Add prototype.
688 * sparc-opc.c (arg): Change name field to be const.
689 (lookup_name, lookup_value): Add prototypes. Change table and
690 name parameters to be const.
691 (sparc_encode_asi): Change name parameter to be const.
692 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
693 (sparc_encode_sparclet_cpreg): Likewise.
694 (sparc_decode_asi): Change return type to be const.
695 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
696 (sparc_decode_sparclet_cpreg): Likewise.
698 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
700 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
701 Solaris doesn't like the combined options, and the -f is
703 (stamp-tshlink, install): Likewise.
705 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
707 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
710 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
712 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
714 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
716 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
719 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
721 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
724 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
726 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
728 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
730 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
733 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
735 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
736 floatformat_to_double to make portable.
737 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
740 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
742 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
743 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
745 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
747 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
748 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
751 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
753 * tic80-opc.c (LSI_SCALED): Renamed from this ...
754 (OFF_SL_BR_SCALED): ... to this, and added the flag
755 TIC80_OPERAND_BASEREL to the flags word.
756 (tic80_opcodes): Replace all occurances of LSI_SCALED with
760 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
762 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
763 Change mips_opcodes from const array to a pointer,
764 and change bfd_mips_num_opcodes from const int to int,
765 so that we can increase the size of the mips opcodes table
769 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
771 * tic80-opc.c (tic80_predefined_symbols): Revert change to
772 store BITNUM values in the table in one's complement form
773 to match behavior when assembler is given a raw numeric
774 value for a BITNUM operand.
775 * tic80-dis.c (print_operand_bitnum): Ditto.
779 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
781 * d30v-opc.c: Removed references to FLAG_X.
784 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
786 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
789 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
791 * Makefile.in: Added d30v object files.
792 * configure: (bfd_d30v_arch) Rebuilt.
793 * configure.in: (bfd_d30v_arch) Added new case.
794 * d30v-dis.c: New file.
795 * d30v-opc.c: New file.
796 * disassemble.c (disassembler) Add entry for d30v.
800 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
802 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
803 representations for the floating point BITNUM values.
805 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
807 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
808 in the table in one's complement form, as they appear in the
810 (tic80_symbol_to_value): Use macros to access predefined
812 (tic80_value_to_symbol): Ditto.
813 (tic80_next_predefined_symbol): New function.
814 * tic80-dis.c (print_operand_bitnum): Remove code that did
815 one's complement for BITNUM values.
819 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
821 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
824 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
826 * makefile.vms: Remove 8 bit characters. Update to latest
829 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
831 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
833 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
835 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
836 (IMM24_PCREL): Likewise.
838 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
840 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
841 address for an extended PC relative instruction that is not a
844 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
846 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
850 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
852 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
853 (tic80_opcodes): Sort entries so that long immediate forms
854 come after short immediate forms, making it easier for
855 assembler to select the right one for a given operand.
858 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
860 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
862 (print_insn_mips16): Likewise.
865 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
867 * mips-opc.c: add r5900.
871 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
873 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
874 a symbol class that restricts translation to just that
875 class (general register, condition code, etc).
877 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
879 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
880 and REG_DEST_E for register operands that have to be
881 an even numbered register. Add REG_FPA for operands that
882 are one of the floating point accumulator registers.
883 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
884 (tic80_opcodes): Change entries that need even numbered
885 register operands to use the new operand table entries.
886 Add "or" entries that are identical to "or.tt" entries.
889 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
891 * mips16-opc.c: Add new cases of exit instruction for
893 * mips-dis.c (print_mips16_insn_arg): Display floating point
894 registers in operands of exit instruction. Print `$' before
895 register names in operands of entry and exit instructions.
898 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
900 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
901 pairs for all predefined symbols recognized by the assembler.
902 Also used by the disassembling routines.
903 (tic80_symbol_to_value): New function.
904 (tic80_value_to_symbol): New function.
905 * tic80-dis.c (print_operand_control_register,
906 print_operand_condition_code, print_operand_bitnum):
907 Remove private tables and use tic80_value_to_symbol function.
910 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
912 * d10v-dis.c (print_operand): Change address printing
913 to correctly handle PC wrapping. Fixes PR11490.
915 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
917 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
920 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
922 * mips-dis.c (print_insn_mips16): Set insn_info information.
923 (print_mips16_insn_arg): Likewise.
925 * mips-dis.c (print_insn_mips16): Better handling of an extend
926 opcode followed by an instruction which can not be extended.
928 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
930 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
931 coldfire moveb instruction to not allow an address register as
932 destination. Although the documentation does not indicate that
933 this is invalid, experiments uncovered unexpected behavior.
934 Added a comment explaining the situation. Thanks to Andreas
935 Schwab for pointing this out to me.
938 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
940 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
941 entries are presorted so that entries with the same mnemonic are
942 adjacent to each other in the table. Sort the entries for each
943 instruction so that this is true.
946 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
948 * m68k-dis.c: Include <libiberty.h>.
949 (print_insn_m68k): Sort the opcode table on the most significant
950 nibble of the opcode.
953 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
955 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
956 "vsub", "vst", "xnor", and "xor" instructions.
957 (V_a1): Renamed from V_a, msb of accumulator reg number.
958 (V_a0): Add macro, lsb of accumulator reg number.
960 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
962 * tic80-dis.c (print_insn_tic80): Broke excessively long
963 function up into several smaller ones and arranged for
964 the instruction printing function to be callable recursively
965 to print vector instructions that have both a load and a
966 math instruction packed into a single opcode.
967 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
968 to explain why it comes after the other vector opcodes.
971 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
973 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
974 move insns to handle immediate operands.
976 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
978 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
979 fix operand mask in the "moveml" entries for the coldfire.
982 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
984 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
985 New macros for building vector instruction opcodes.
986 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
987 FMT_LI, which were unused. The field is now a flags field.
988 Remove some opcodes that are possible, but illegal, such
989 as long immediate instructions with doubles for immediate
990 values. Add "vadd" and "vld" instructions.
992 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
994 * tic80-opc.c (tic80_operands): Reorder some table entries to make
995 the order more logical. Move the shift alias instructions ("rotl",
996 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
997 interspersed with the regular sr.x and sl.x instructions. Add
998 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
999 "sub", "subu", "swcr", and "trap".
1001 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1003 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1004 (OFF_SL_PC): Renamed from OFF_SL.
1005 (OFF_SS_BR): New operand type for base relative operand.
1006 (OFF_SL_BR): New operand type for base relative operand.
1007 (REG_BASE): New operand type for base register operand.
1008 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1009 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1010 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1012 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1013 10 char field, padded with spaces on rhs, rather than a string
1014 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1015 than old TIC80_OPERAND_RELATIVE. Add support for new
1016 TIC80_OPERAND_BASEREL flag bit.
1018 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1020 * tic80-dis.c (print_insn_tic80): Print floating point operands
1022 * tic80-opc.c (SPFI): Add single precision floating point
1023 immediate operand type.
1024 (ROTATE): Add rotate operand type for shifts.
1025 (ENDMASK): Add for shifts.
1026 (n): Macro for the 'n' bit.
1027 (i): Macro for the 'i' bit.
1028 (PD): Macro for the 'PD' field.
1029 (P2): Macro for the 'P2' field.
1030 (P1): Macro for the 'P1' field.
1031 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1035 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1037 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1038 adding in current address for pc-relative operands.
1040 start-sanitize-tic80
1041 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1043 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1044 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1045 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1046 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1047 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1048 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1049 (REG_SCALED, LSI_SCALED): New operand types.
1050 (E): New macro for 'E' bit at bit 27.
1051 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1052 opcodes, including the various size flavors (b,h,w,d) for
1053 the direct load and store instructions.
1055 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1057 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1059 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1060 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1061 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1062 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1063 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1064 masks with "MASK_* & ~M_*" to get the M bit reset.
1065 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1067 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1069 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1070 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1071 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1073 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1074 CC, SICR, and LICR table entries.
1075 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1076 "bcnd", and "brcr" opcodes.
1079 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1081 * ppc-opc.c (powerpc_operands): Make comment match the
1082 actual fields (no shift field).
1083 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1084 start-sanitize-tic80
1085 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1086 partial implementation, work in progress.
1087 * tic80-opc.c (tic80_operands): Begin construction operands table.
1088 (tic80_opcodes): Continue populating opcodes table and start
1089 filling in the operand indices.
1090 (tic80_num_opcodes): Add this.
1093 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1095 * m68k-opc.c: Add #B case for moveq.
1097 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1099 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1100 before they are used.
1102 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1104 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1105 for "breakpoint" instruction.
1107 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1109 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1110 (dep): Use ALL_CFLAGS rather than CFLAGS.
1112 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1114 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1117 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1119 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1120 start-sanitize-tic80
1121 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1124 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1126 * mips16-opc.c: Add "abs".
1128 start-sanitize-tic80
1129 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1131 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1132 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1133 (disassembler): Add bfd_arch_tic80 support to set disassemble
1134 to print_insn_tic80.
1135 * tic80-dis.c (print_insn_tic80): Add stub.
1137 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1139 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1140 * configure: Regenerate with autoconf.
1141 * tic80-dis.c: Add file.
1142 * tic80-opc.c: Add file.
1145 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1147 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1149 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1151 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1152 (mn10200_opcodes): Use it for some logicals and btst insns.
1153 Add "break" and "trap" instructions.
1155 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1157 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1159 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1161 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1162 relative load or add now depends upon whether the instruction is
1165 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1167 * mn10200-dis.c: Finish writing disassembler.
1168 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1169 Fix mask for "jmp (an)".
1171 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1172 handle endianness issues for mn10300.
1174 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1176 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1178 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1179 instruction. Fix opcode field for "movb (imm24),dn".
1181 * mn10200-opc.c (mn10200_operands): Fix insertion position
1184 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1186 * mn10200-opc.c: Create mn10200 opcode table.
1187 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1188 but moving along nicely.
1190 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1192 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1194 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1196 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1197 specifiers for fmovem* instructions.
1199 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1201 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1203 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1205 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1208 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1210 * mn10300-opc.c: Add some comments explaining the various
1213 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1215 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1217 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1220 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1221 operand specifiers in fmovm* instructions.
1223 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1225 * ppc-opc.c (insert_li): Give an error if the offset has the two
1226 least significant bits set.
1228 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1230 * mips-dis.c (print_insn_mips16): Separate the instruction from
1231 the arguments with a tab, not a space.
1233 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1235 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1238 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1241 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1243 * configure: Rebuild with autoconf 2.12.
1245 Add support for mips16 (16 bit MIPS implementation):
1246 * mips16-opc.c: New file.
1247 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1248 (mips16_reg_names): New static array.
1249 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1250 after seeing a 16 bit symbol.
1251 (print_insn_little_mips): Likewise.
1252 (print_insn_mips16): New static function.
1253 (print_mips16_insn_arg): New static function.
1254 * mips-opc.c: Add jalx instruction.
1255 * Makefile.in (mips16-opc.o): New target.
1256 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1257 * configure: Rebuild.
1259 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1261 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1262 operand specifiers in *save, *restore and movem* instructions.
1264 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1267 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1268 register operands for immediate arithmetic, not, neg, negx, and
1269 set according to condition instructions.
1271 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1272 specifier of the effective-address operand in immediate forms of
1273 arithmetic instructions. The specifier for the immediate operand
1274 notes how and where the constant will be stored.
1276 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1278 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1281 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1284 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1286 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1288 * mn10300-dis.c (disassemble): Handle register lists.
1290 * mn10300-opc.c: Fix handling of register list operand for
1291 "call", "ret", and "rets" instructions.
1293 * mn10300-dis.c (disassemble): Print PC-relative and memory
1294 addresses symbolically if possible.
1295 * mn10300-opc.c: Distinguish between absolute memory addresses,
1296 pc-relative offsets & random immediates.
1298 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1300 (disassemble): Handle SPLIT and EXTENDED operands.
1302 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1304 * mn10300-dis.c: Rough cut at printing some operands.
1306 * mn10300-dis.c: Start working on disassembler support.
1307 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1309 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1311 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1313 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1315 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1317 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1319 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1320 register argument is calls and jmp instructions.
1322 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1324 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1325 getx operand. Fix opcode for mulqu imm,dn.
1327 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1329 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1330 in MN10300_OPERAND_SPLIT operands for how many bits
1331 appear in the basic insn word. Add IMM32_HIGH24,
1332 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1333 (mn10300_opcodes): Use new operands as needed.
1335 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1336 for bset, bclr, btst instructions.
1337 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1339 * mn10300-opc.c (mn10300_operands): Remove many redundant
1340 operands. Update opcode table as appropriate.
1341 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1342 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1344 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1346 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1347 operands (for indexed load/stores). Fix bitpos for DI
1348 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1349 few instructions that insert immediates/displacements in the
1350 middle of the instruction. Add IMM8E for 8 bit immediate in
1351 the extended part of an instruction.
1352 (mn10300_operands): Use new opcodes as appropriate.
1354 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1356 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1357 sequential so the assembler never parallelizes it with
1360 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1362 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1363 a data/address register that appears in register field 0
1364 and register field 1.
1365 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1367 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1369 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1370 standard disassembly.
1372 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1373 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1374 Recategorize PALcode instructions.
1376 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1378 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1380 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1382 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1383 there are no operand types.
1385 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1387 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1389 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1391 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1393 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1395 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1397 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1398 and sst.w instructions.
1400 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1403 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1405 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1408 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1410 * ppc-opc.c (PPCPWR2): Define.
1411 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1414 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1416 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1417 field for movhu instruction.
1419 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1420 cast value to "long" not "signed long" to keep hpux10
1423 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1425 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1428 * mn10300-opc.c (FMT*): Remove definitions.
1430 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1431 for shift-by-register opcodes.
1433 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1434 into [AD][MN][01] for encoding the position of the register
1437 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1439 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1440 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1442 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1444 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1445 Fix various typos. Add "PAREN" operand.
1446 (MEM, MEM2): Define.
1447 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1448 operands. Fix several typos.
1450 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1453 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1455 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1456 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1458 (mn10300_opcodes): Break opcode format out into its own field.
1459 Update many operand fields to deal with signed vs unsigned
1460 issues. Fix one or two typos in the "mov" instruction
1461 opcode, mask and/or operand fields.
1463 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1465 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1466 m68851 wasn't reset.
1468 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1470 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1471 all opcodes. Very rough cut at operands for all opcodes.
1473 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1476 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1478 * mn10200-opc.c, mn10300-opc.c: New files.
1479 * mn10200-dis.c, mn10300-dis.c: New files.
1480 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1481 * disassemble.c: Break mn10x00 support into 10200 and 10300
1483 * configure.in: Likewise.
1484 * configure: Rebuilt.
1486 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1488 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1490 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1492 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1494 * disassemble (ARCH_mn10x00): Define.
1495 (disassembler): Handle bfd_arch_mn10x00.
1496 * configure.in: Recognize bfd_mn10x00_arch.
1497 * configure: Rebuilt.
1499 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1501 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1502 accordingly. Don't declare functions using op_rtn.
1504 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1506 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1507 params to be more standard.
1508 * (disassemble): Print absolute addresses and symbolic names for
1509 branch and jump targets.
1510 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1512 * (v850_opcodes): Add breakpoint insn.
1514 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1516 * m68k-opc.c: Move the fmovemx data register cases before the
1517 other cases, so that they get recognized before the data register
1518 does gets treated as a degenerate register list.
1520 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1522 * mips-opc.c: Add a case for "div" and "divu" with two registers
1523 and a destination of $0.
1525 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1527 * mips-dis.c (print_insn_arg): Add prototype.
1528 (_print_insn_mips): Ditto.
1530 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1532 * mips-dis.c (print_insn_arg): Print condition code registers as
1535 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1537 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1539 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1541 * v850-dis.c (disassemble): Make static. Provide prototype.
1543 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1545 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1548 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1550 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1551 ']' characters into the output stream.
1552 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1553 Add "memop" field to all opcodes (for the disassembler).
1554 Reorder opcodes so that "nop" comes before "mov" and "jr"
1555 comes before "jarl".
1557 * v850-dis.c (print_insn_v850): Fix typo in last change.
1559 * v850-dis.c (print_insn_v850): Properly handle disassembling
1560 a two byte insn at the end of a memory region when the memory
1561 region's size is only two byte aligned.
1563 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1565 * v850-dis.c (v850_reg_names): Define.
1566 (v850_sreg_names, v850_cc_names): Likewise.
1567 (disassemble): Very rough cut at printing operands (unformatted).
1569 * v850-opc.c (BOP_MASK): Fix.
1570 (v850_opcodes): Fix mask for jarl and jr.
1572 * v850-dis.c: New file. Skeleton for disassembler support.
1573 * Makefile.in Remove v850 references, they're not needed here.
1574 * configure.in: Add v850-dis.o when building v850 toolchains.
1575 * configure: Rebuilt.
1576 * disassemble.c (disassembler): Call v850 disassembler.
1578 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1579 (insert_d8_6, extract_d8_6): New functions.
1580 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1581 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1583 (IF4A, IF4B): Use "D7" instead of "D7S".
1584 (IF4C, IF4D): Use "D8_7" instead of "D8".
1585 (IF4E, IF4F): New. Use "D8_6".
1586 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1587 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1589 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1590 (v850_operands): Change D16 to D16_15, use special insert/extract
1591 routines. New new D16 that uses the generic insert/extract code.
1592 (IF7A, IF7B): Use D16_15.
1593 (IF7C, IF7D): New. Use D16.
1594 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1596 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1597 message. Issue an error if the branch offset is odd.
1599 * v850-opc.c: Add notes about needing special insert/extract
1600 for all the load/store insns, except "ld.b" and "st.b".
1602 * v850-opc.c (insert_d22, extract_d22): New functions.
1603 (v850_operands): Use insert_d22 and extract_d22 for
1605 (insert_d9): Fix range check.
1607 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1609 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1610 and set bits field to D9 and D22 operands.
1612 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1614 * v850-opc.c (v850_operands): Define SR2 operand.
1615 (v850_opcodes): "ldsr" uses R1,SR2.
1617 * v850-opc.c (v850_opcodes): Fix opcode specs for
1618 sld.w, sst.b, sst.h, sst.w, and nop.
1620 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1622 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1623 end of the opcode table.
1625 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1627 * d10v-opc.c (pre_defined_registers): Added register pairs,
1628 "r0-r1", "r2-r3", etc.
1630 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1632 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1633 Create I16U for an unsigned 16bit mmediate operand.
1634 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1636 * v850-opc.c (v850_operands): Define EP operand.
1637 (IF4A, IF4B, IF4C, IF4D): Use EP.
1639 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1640 with immediate operand, "movhi". Tweak "ldsr".
1642 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1643 correct. Get sld.[bhw] and sst.[bhw] closer.
1645 * v850-opc.c (v850_operands): "not" is a two byte insn
1647 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1649 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1651 * v850-opc.c (two): Get order of words correct.
1653 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1655 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1656 register source and destination operands.
1657 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1659 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1660 same thinko in "trap" opcode.
1662 * v850-opc.c (v850_opcodes): Add initializer for size field
1665 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1666 Add D8 for 8-bit unsigned field in short load/store insns.
1667 (IF4A, IF4D): These both need two registers.
1668 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1669 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1670 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1671 for "ldsr" and "stsr".
1672 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1675 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1676 short store word (sst.w).
1678 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1680 * v850-opc.c (v850_operands): Added insert and extract fields,
1681 pointers to functions that handle unusual operand encodings.
1683 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1685 * v850-opc.c (v850_opcodes): Enable "trap".
1687 * v850-opc.c (v850_opcodes): Fix order of displacement
1688 and register for "set1", "clr1", "not1", and "tst1".
1690 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1692 * v850-opc.c (v850_operands): Add "B3" support.
1693 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1696 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1698 * v850-opc.c: Close unterminated comment.
1700 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1702 * v850-opc.c (v850_operands): Add flags field.
1703 (v850_opcodes): add move opcodes.
1705 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1707 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1708 * configure: (bfd_v850v_arch) Add new case.
1709 * configure.in: (bfd_v850_arch) Add new case.
1710 * v850-opc.c: New file.
1712 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1714 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1716 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1718 * d10v-opc.c: Add additional information to the opcode
1719 table to help determinine which instructions can be done
1722 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1724 * mpw-make.sed: Update editing of include pathnames to be
1727 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1729 * arm-opc.h: Added "bx" instruction definition.
1731 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1733 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1735 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1737 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1739 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1741 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1743 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1745 * makefile.vms: Update for alpha-opc changes.
1747 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1749 * i386-dis.c (print_insn_i386): Actually return the correct value.
1750 (ONE, OP_ONE): #ifdef out; not used.
1752 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1754 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1755 Changed subi operand type to treat 0 as 16.
1757 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1759 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1762 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1764 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1765 memory transfer instructions. Add new format string entries %h and %s.
1766 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1769 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1771 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1772 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1774 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1776 * alpha-dis.c (print_insn_alpha_osf): Remove.
1777 (print_insn_alpha_vms): Remove.
1778 (print_insn_alpha): Make globally visible. Chose the register
1779 names based on info->flavour.
1780 * disassemble.c: Always return print_insn_alpha for the alpha.
1782 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1784 * d10v-dis.c (dis_long): Handle unknown opcodes.
1786 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1788 * d10v-opc.c: Changes to support signed and unsigned numbers.
1789 All instructions with the same name that have long and short forms
1790 now end in ".l" or ".s". Divs added.
1791 * d10v-dis.c: Changes to support signed and unsigned numbers.
1793 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1795 * d10v-dis.c: Change all functions to use info->print_address_func.
1797 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1799 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1800 move ccr/sr insns more strict so that the disassembler only
1801 selects them when the addressing mode is data register.
1803 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1804 * d10v-opc.c (pre_defined_registers): Declare.
1805 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1806 to pick a better name for the registers.
1808 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1810 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1811 operands for fexpand and fpmerge. From Christian Kuehnke
1812 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1814 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1816 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1817 print routine. Take new regnames and cpumask arguments.
1818 Kill the environment variable nonsense.
1819 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1820 (print_insn_alpha_vms): New function. Do VMS style regnames.
1821 * disassemble.c (disassembler): Test bfd flavour to pick
1822 between OSF and VMS routines. Default to OSF.
1824 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1826 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1827 * configure: Rebuild.
1828 * Makefile.in (install): Use @INSTALL_SHLIB@.
1830 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1832 * configure: (bfd_d10v_arch) Add new case.
1833 * configure.in: (bfd_d10v_arch) Add new case.
1834 * d10v-dis.c: New file.
1835 * d10v-opc.c: New file.
1836 * disassemble.c (disassembler) Add entry for d10v.
1838 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1840 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1841 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1843 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1845 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1846 distinguish between variants of the instruction set.
1847 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1848 distinguish between variants of the instruction set.
1850 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1852 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1853 the 8086 instruction set.
1854 * i386-dis.c: General cleanups. Make most things static. Add
1855 prototypes. Get rid of static variables aflags and dflags. Pass
1856 them as args (to almost everything).
1858 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1860 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1862 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1864 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1865 if the next arg is marked with SRC_IN_DST. Gross.
1867 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1868 we're looking for and find EXR.
1870 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1871 if we're looking for KBIT and we don't find it.
1873 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1876 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1877 3bit immediate operands.
1879 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1881 * Released binutils 2.7.
1883 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1884 <kkaempf@progis.ac-net.de>.
1886 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1888 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1890 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1892 * sparc-dis.c (print_insn_sparclite): New routine to print
1893 sparclite instructions.
1895 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1897 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1899 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1901 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1902 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1903 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1905 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1907 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1908 Use autoconf-set values.
1909 (docdir, oldincludedir): Removed.
1910 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1912 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1914 * alpha-opc.c: New file.
1915 * alpha-opc.h: Remove.
1916 * alpha-dis.c: Complete rewrite to use new opcode table.
1917 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1918 * configure: Rebuild with autoconf 2.10.
1919 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1920 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1922 (alpha-opc.o): New target.
1924 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1926 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1927 Set imm_added_to_rs1 even if the source and destination register
1930 * sparc-opc.c: Add some two operand forms of the wr instruction.
1932 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1934 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1937 * disassemble.c (disassembler): Handle H8/S.
1938 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1940 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1942 * sparc-opc.c: Add beq/teq as aliases for be/te.
1944 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1945 <sergei@msil.sps.mot.com>.
1947 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1949 * makefile.vms: New file.
1951 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1953 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1955 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1958 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1960 * i386-dis.c (OP_OFF): Call append_prefix.
1962 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1964 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1965 unsigned long to silence a warning from the Solaris PowerPC
1968 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1970 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1972 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1974 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1976 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1977 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1978 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1979 cpush, cpusha, cpull sparclet insns.
1981 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1983 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1985 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1987 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1988 Set F_FLOAT on other floating point instructions.
1990 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1992 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1994 (powerpc_opcodes): Add 860/821 specific SPRs.
1996 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1998 * configure.in: Permit --enable-shared to specify a list of
1999 directories. Set and substitute BFD_PICLIST.
2000 * configure: Rebuild.
2001 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2002 uses. Set to @BFD_PICLIST@.
2004 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2006 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2007 not "abs", which may be needed for the absolute in something
2008 like btst #0,@10:8. Print L_3 immediates separately from other
2009 immediates. Change ABSMOV reference to ABS8MEM.
2011 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2013 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2014 (current_arch_mask): New static global.
2015 (compute_arch_mask): New static function.
2016 (print_insn_sparc): Delete sparc_v9_p. New static local
2017 current_mach. Resort opcode table if current_mach changes.
2018 Generalize "insn not supported" test.
2019 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2020 Delete test for v9/!v9.
2021 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2023 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2024 (brfcx): Renamed to FBRX.
2025 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2026 coprocessor mnemonics are not supported on the sparclet).
2027 (condf): Renamed to CONDF.
2028 (SLCBCC2): Delete F_ALIAS flag.
2030 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2032 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2033 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2035 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2037 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2038 that the shared library version number is set correctly.
2040 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2042 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2043 Miles Bader <miles@gnu.ai.mit.edu>.
2044 * configure: Rebuild.
2046 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2048 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2051 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2053 * configure: Rebuild with autoconf 2.8.
2055 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2057 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2058 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2060 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2062 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2063 since they appear as targets in Makefile.in.
2064 * configure: Rebuild.
2066 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2068 * mpw-make.sed: Edit out shared library support bits.
2070 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2072 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2073 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2074 (sparc_opcodes): Add sparclet insns.
2075 (sparclet_cpreg_table): New static local.
2076 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2077 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2079 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2081 * i386-dis.c (index16): New static variable.
2082 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2084 (OP_indirE): Return result of OP_E.
2085 (OP_E): Check for 16 bit addressing mode, and disassemble
2086 correctly. Optimised 32 bit case a little. Don't print
2087 "(base,index,scale)" when sib specifies only an offset.
2089 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2091 * configure.in: Set and substitute SHLIB_DEP.
2092 * configure: Rebuild.
2093 * Makefile.in (SHLIB_DEP): New variable.
2094 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2095 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2096 COMMON_SHLIB, add them to piclist with appropriate modifications.
2097 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2098 here: just use piclist.
2100 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2102 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2103 (print_insn_sparc): Rewrite v9/not-v9 tests.
2104 (compare_opcodes): Likewise.
2105 * sparc-opc.c (MASK_<ARCH>): Define.
2106 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2107 (sparclet,v6notv9): Define.
2108 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2109 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2111 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2113 * configure.in: Call AC_PROG_CC before configure.host.
2114 * configure: Rebuild.
2116 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2118 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2120 * i386-dis.c (onebyte_has_modrm): New static array.
2121 (twobyte_has_modrm): New static array.
2122 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2124 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2126 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2129 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2131 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2134 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2136 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2137 m68010up, not just m68020up | cpu32.
2139 * Makefile.in (SONAME): New variable.
2140 ($(SHLINK)): Make a link to the transformed name, as well.
2141 (stamp-tshlink): New target.
2142 (install): Skip stamp-tshlink during install.
2144 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2146 * configure.in: Call AC_ARG_PROGRAM.
2147 * configure: Rebuild.
2148 * Makefile.in (program_transform_name): New variable.
2149 (install): Transform library name before installing it.
2151 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2153 * i960-dis.c (mem): Add HX dcinva instruction.
2155 Support for building as a shared library, based on patches from
2156 Alan Modra <alan@spri.levels.unisa.edu.au>:
2157 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2158 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2159 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2160 * configure: Rebuild.
2161 * Makefile.in (ALLLIBS): New variable.
2162 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2163 (COMMON_SHLIB, SHLINK): New variables.
2164 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2165 (STAGESTUFF): Remove variable.
2166 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2167 (stamp-piclist, piclist): New targets.
2168 ($(SHLIB), $(SHLINK)): New targets.
2169 ($(OFILES)): Depend upon stamp-picdir.
2170 (disassemble.o): Build twice if PICFLAG is set.
2171 (MOSTLYCLEAN): Add pic/*.o.
2172 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2173 (distclean): Remove pic and stamp-picdir.
2174 (install): Install shared libraries.
2175 (stamp-picdir): New target.
2177 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2179 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2180 Print unknown instruction as "unknown", rather than in hex.
2182 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2184 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2186 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2188 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2190 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2192 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2193 when necessary. From Ulrich Drepper
2194 <drepper@myware.rz.uni-karlsruhe.de>.
2196 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2198 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2199 sparc_num_opcodes. Update architecture enum values.
2200 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2201 (sparc_opcode_lookup_arch): New function.
2202 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2203 (sparc_opcodes): Add v9a shutdown insn.
2205 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2207 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2208 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2210 (print_insn_sparc64): Deleted.
2211 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2214 * sparc-opc.c (architecture_pname): Add v9a.
2216 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2218 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2219 incorrectly defined as 0x16 when it should be 0x15.
2220 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2221 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2222 excb (exception barrier) which is defined in the Alpha
2223 Architecture Handbook version 2.
2224 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2225 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2226 disassembled as or, for example.
2228 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2230 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2231 (_print_insn_mips): Change i from int to unsigned int.
2233 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2235 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2236 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2238 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2240 * i386-dis.c: Added Pentium Pro instructions.
2242 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2244 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2247 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2249 * sh-opc.h (sh_nibble_type): Added REG_B.
2250 (sh_arg_type): Added A_REG_B.
2251 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2253 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2255 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2257 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2259 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2261 * Makefile.in (distclean): Remove stamp-h. From Ronald
2262 F. Guilmette <rfg@monkeys.com>.
2264 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2266 From David Mosberger-Tang <davidm@azstarnet.com>:
2267 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2270 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2272 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2273 (sh_table): Added many SH3 opcodes.
2274 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2276 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2278 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2279 (subco,subco.): Mark this PPC, not PPCCOM.
2281 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2283 * configure: Rebuild with autoconf 2.7.
2285 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2287 * configure: Rebuild with autoconf 2.6.
2289 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2291 * configure.in: Sort list of architectures. Accept but do nothing
2292 for alliant, convex, pyramid, romp, and tahoe.
2294 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2296 * a29k-dis.c (print_special): Change num to unsigned int.
2298 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2300 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2303 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2305 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2306 * configure: Rebuilt.
2308 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2310 * configure.in: Add case for bfd_i860_arch.
2311 * configure: Rebuild.
2313 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2315 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2316 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2317 (NEXTDOUBLE): Likewise.
2318 (print_insn_m68k): Don't match fmoveml if there is more than one
2319 register in the list.
2320 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2322 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2324 * m68k-opc.c: Use #W rather than #w.
2325 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2327 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2329 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2330 and likewise for all the dbxx opcodes.
2332 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2334 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2336 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2338 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2339 the VR4100 specific instructions to the mips_opcodes structure.
2341 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2343 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2344 ugly Metrowerks bug in CW6, is fixed in CW7.
2346 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2348 * ppc-opc.c (whole file): Add flags for common/any support.
2350 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2352 * Makefile.in (BISON): Remove macro.
2353 (FLAGS_TO_PASS): Remove BISON.
2355 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2357 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2359 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2360 instructions that take no args by looking at the match mask.
2361 (print_insn_arg): Always print "%" before register names.
2362 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2363 [case '_']: Don't print "@#" before address.
2364 [case 'J']: Use "%s" as format string, not register name.
2365 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2367 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2369 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2372 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2374 From David Mosberger-Tang <davidm@azstarnet.com>
2376 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2377 (alpha_insn_set): added definitions for VAX floating point
2378 instructions (Unix compilers don't generate these, but handcoded
2379 assembly might still use them).
2381 * alpha-dis.c (print_insn_alpha): added support for disassembling
2382 the miscellaneous instructions in the Alpha instruction set.
2384 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2386 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2387 no longer create sysdep.h, sed ppc-opc.c to work around a
2388 serious Metrowerks C bug.
2389 * mpw-make.in: Remove.
2390 * mpw-make.sed: New file, used by mpw-configure to edit
2391 Makefile.in into an MPW makefile.
2393 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2395 * Makefile.in (maintainer-clean): New synonym for realclean.
2397 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2399 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2400 which use '0', '1', and '2' instead. Specify the proper size for
2401 a pmove immediate operand. Correct the pmovefd patterns to be
2402 moves to a register, not from a register.
2403 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2405 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2407 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2408 %psr, %wim, %tbr as F_NOTV9.
2410 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2412 * Makefile.in (Makefile): Just rebuild Makefile when running
2414 (config.h, stamp-h): New targets.
2415 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2416 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2417 rebuilding config.h.
2418 * configure: Rebuild.
2420 * mips-opc.c: Change unaligned loads and stores with "t,A"
2421 operands to use "t,A(b)".
2423 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2425 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2427 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2429 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2430 until 3 instead of until 2.
2432 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2434 * Makefile.in (ALL_CFLAGS): Define.
2435 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2436 (MOSTLYCLEAN): Add config.log.
2437 (distclean): Don't remove config.log.
2438 * configure.in: Substitute HDEFINES.
2439 * configure: Rebuild.
2441 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2443 * sh-opc.h (sh_arg_type): Add F_FR0.
2444 (sh_table, case fmac): Add F_FR0 as first argument.
2446 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2448 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2450 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2452 * sparc-dis.c: Remove all references to NO_V9.
2454 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2456 * aclocal.m4: Just include ../bfd/aclocal.m4.
2457 * configure: Rebuild.
2459 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2461 * sparc-dis.c (X_DISP19): Define.
2462 (print_insn, case 'G'): Use it.
2463 (print_insn, case 'L'): Sign extend displacement.
2465 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2467 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2468 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2469 host_makefile_frag or frags.
2470 * aclocal.m4: New file.
2471 * configure: Rebuild.
2472 * Makefile.in (INSTALL): Set to @INSTALL@.
2473 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2474 (INSTALL_DATA): Set to @INSTALL_DATA@.
2476 (AR_FLAGS): Set to rc rather than qc.
2477 (CC): Define as @CC@.
2478 (CFLAGS): Set to @CFLAGS@.
2479 (@host_makefile_frag@): Remove.
2480 (config.status): Remove dependency upon @frags@.
2482 * configure.in: ../bfd/config.bfd now just sets shell variables.
2483 Use them rather than looking through target Makefile fragments.
2484 * configure: Rebuild.
2486 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2488 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2490 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2492 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2493 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2496 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2497 (lookup_{name,value}): New functions.
2498 (prefetch_table): New static local.
2499 (sparc_{encode,decode}_prefetch): New functions.
2500 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2502 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2504 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2507 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2509 * sh-dis.c: Correct comment on first line of file.
2511 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2513 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2515 * sparc-opc.c (asi, membar): New static locals.
2516 (sparc_{encode,decode}_{asi,membar}): New functions.
2517 (sparc_opcodes, membar insn): Fix.
2518 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2519 Support decoding of membar masks.
2522 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2524 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2526 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2528 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2529 and likewise for the other branches. Add bhs as an alias for bcc,
2530 and likewise for the size variants. Add dbhs as an alias for
2533 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2535 * sh-opc.h (FP sts instructions): Update to match reality.
2537 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2539 * m68k-dis.c: (fpcr_names): Add % before all register names.
2540 (reg_names): Likewise.
2541 (print_insn_arg): Don't explicitly print % before register names.
2542 Add % before register names in static array names. In case 'r',
2543 print data registers as `@(Dn)', not `Dn@'. When printing a
2544 memory address, don't print @# before it.
2545 (print_indexed): Change base_disp and outer_disp from int to
2546 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2547 syntax. Sign extend 8 byte displacement correctly.
2548 (print_base): Print using MIT syntax. Print zpc when appropriate.
2549 Change parameter disp from int to bfd_vma.
2551 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2554 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2556 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2557 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2558 * sh-opc.h (sh_arg_type): Add new operand types.
2559 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2561 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2563 * Makefile.in (distclean): Remove generated file config.h.
2565 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2567 * Makefile.in (distclean): Remove generated file config.h.
2569 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2571 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2573 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2575 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2576 rather than numopcodes. Use m68k_opcodes rather than removed
2577 opcode function. Don't check F_ALIAS.
2578 (print_insn_arg): Change first parameter to be const char *.
2579 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2580 (m68k-opc.o): New target.
2581 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2582 * configure: Rebuild.
2584 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2586 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2587 (opcode_bits, opcode_hash_table): New variables.
2588 (opcodes_initialized): Renamed from opcodes_sorted.
2589 (build_hash_table): New function.
2590 (is_delayed_branch): Use hash table.
2591 (print_insn): Renamed from print_insn_sparc, made static.
2592 Build and use hash table. If !sparc64, ignore sparc64 insns,
2593 and vice-versa if sparc64.
2594 (print_insn_sparc, print_insn_sparc64): New functions.
2595 (compare_opcodes): Move sparc64 opcodes to end.
2596 Print commutative insns with constant second.
2597 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2599 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2601 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2602 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2603 avoids printing a delay slot in a delay slot.
2604 * sh-opc.h (sh_table): Fully bracket last entry.
2606 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2608 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2610 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2612 * configure.in: Get host_makefile_frag from ${srcdir}.
2614 * configure.in: Autoconfiscated. Check for string[s].h. Create
2615 config.h from config.in. Don't set up sysdep.h link.
2616 * sysdep.h: New file.
2617 * configure, config.in: New files, generated from configure.in.
2618 * Makefile.in: Updated to be processed autoconf-style.
2619 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2620 (Makefile): Depend on config.status.
2621 (config.status): New rule.
2622 * configure.bat: Update Makefile substitutions.
2624 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2626 * mips-opc.c (L1): Define.
2627 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2628 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2631 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2633 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2634 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2635 have multiple add units but only a single logical unit.
2637 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2638 shifted by 18, without any insertion or extraction function.
2639 (insert_cr, extract_cr): Remove.
2641 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2643 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2646 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2648 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2649 * sh-opc.h: Add copyright.
2651 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2653 * Makefile.in (crunch-m68k): Delete extra target accidentally
2654 checked in a while ago.
2656 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2658 * sh-opc.h (sh_table): Add SH3 support.
2660 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2662 * sh-opc.h: Added bsrf and braf.
2664 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2666 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2667 bogus [ls]fm{ea,fd} patterns.
2669 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2670 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2671 initialize it from memory. Make function static.
2672 (print_insn_{big,little}_arm): New functions.
2673 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2674 the correct endianness.
2676 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2678 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2681 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2683 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2684 17th, so that it builds again using GCC as the compiler.
2686 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2688 * mips-dis.c (print_insn_little_mips): Cast return value from
2689 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2690 expects an unsigned long, and that might be fewer words of
2691 argument storage (e.g., if bfd_vma is long long on a 32-bit
2693 (print_insn_big_mips): Likewise with bfd_getb32 value.
2694 (_print_insn_mips): Now static.
2696 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2698 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2699 gcc memory hog problem with initializer is fixed.
2701 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2703 Merge in support for Mac MPW as a host.
2704 (Old change descriptions retained for informational value.)
2706 * mpw-config.in (archname): Compute from the config.
2707 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2709 * mpw-config.in (target_arch): Compute from canonical target.
2710 (m68k, mips, powerpc, sparc): Add architectures.
2711 * mpw-make.in (disassemble.c.o): Add.
2712 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2714 * mpw-config.in (BFD_MACHINES): Set to a default value.
2715 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2717 * mpw-make.in (CSEARCH): Add extra-include to search path.
2719 * mpw-config.in (varargs.h): Don't create.
2720 (sysdep.h): Create using forward-include.
2721 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2723 * mpw-config.in: New file, MPW version of configure.in.
2724 * mpw-make.in: New file, MPW version of Makefile.in.
2726 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2728 * alpha-dis.c (print_insn_alpha): Put empty statement after
2731 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2733 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2734 (low_sign_extend): Likewise.
2735 (get_field): Delete unused function.
2736 (set_field, deposit_14, deposit_21): Likewise.
2738 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2740 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2743 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2745 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2747 * alpha-opc.h (OSF_ASMCODE): define
2748 print pal-code names as defined in App C of the
2749 Alpha Architecture Reference Manual
2751 * alpha-dis.c: cleaned up output
2752 print stylized code forms as defined in App A.4.3 of the
2753 Alpha Architecture Reference Manual
2755 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2757 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2759 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2762 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2764 * m68k-dis.c (opcode): New function. Returns address of opcode
2765 table entry given index, even if the opcode table was split to
2766 work around gcc bugs.
2767 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2769 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2770 (reg_names): Now const.
2771 (print_insn_arg): Arrays cacheFieldName and names now const.
2772 (print_indexed): Array scales now const.
2774 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2776 * ppc-opc.c: Sort recently added instructions by minor opcode
2777 number within major opcode number.
2779 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2781 * hppa-dis.c: Include libhppa.h.
2783 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2785 * mips-opc.c: Change dli to use M_DLI, and add dla.
2787 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2789 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2791 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2793 * mips-opc.c: Add r4650 mul instruction.
2795 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2797 * mips-opc.c: Add uld and usd macros for unaligned double load and
2800 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2802 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2803 mfdcr, mtdcr, icbt, iccci.
2805 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2807 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2808 signed char fields to shorts, more portable.
2810 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2812 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2813 char fields as signed chars, since they may have negative values.
2815 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2817 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2818 (mycroft@netbsd.org).
2820 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2822 From "Logg, Ed" <elogg@ea.com>:
2823 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2824 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2827 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2829 * ppc-opc.c: Changes based on patch from David Edelsohn
2830 <edelsohn@mhpcc.edu>.
2831 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2834 (insert_tbr): New static function.
2835 (extract_tbr): New static function.
2836 (XFXFXM_MASK, XFXM): Define.
2837 (XSPRBAT_MASK, XSPRG_MASK): Define.
2838 (powerpc_opcodes): Add instructions to access special registers by
2839 name. Add mtcr and mftbu.
2841 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2843 * mips-opc.c (P3): Define.
2844 (mips_opcodes): Add mad and madu.
2846 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2848 * configure.in: Add W65 support.
2849 * disassemble.c: Likewise.
2850 * w65-opc.h, w65-dis.c: New files.
2852 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2854 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2857 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2859 * mips-opc.c: Add dli as a synonym for li.
2861 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2863 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2864 print something for reserved opcode values, even if it won't
2867 * mips-dis.c (_print_insn_mips): When initializing, shift right
2868 and mask, to avoid sign extension problems on the Alpha.
2870 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2873 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2875 * sh-opc.h (mov.l gbr): Get direction right.
2876 * sh-dis.c (print_insn_shx): New function.
2877 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2878 print opcodes with right byte order.
2880 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2882 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2883 to avoid conflicts with getopt.
2885 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2887 * hppa-dis.c (print_insn_hppa): Read the instruction using
2888 bfd_getb32, so that it works on a little endian or 64 bit host.
2889 Remove unused local variable op.
2891 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2893 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2894 addu does not work correctly if -mips3.
2896 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2898 * a29k-dis.c (print_special): Add special register names defined
2899 on 29030, 29040 and 29050.
2900 (print_insn): Handle new operand type 'I'.
2902 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2904 * Makefile.in (INSTALL): Use top level install.sh script.
2906 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2908 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2909 that it works on a little endian host.
2911 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2913 * configure.in: Use ${config_shell} when running config.bfd.
2915 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2917 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2919 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2921 * a29k-dis.c (print_insn): Print the opcode.
2923 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2925 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2927 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2929 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2931 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2933 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2934 which store a value into memory.
2936 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2938 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2939 * arm-dis.c, arm-opc.h: New files.
2941 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2943 * Makefile.in (ns32k-dis.o): Add dependency.
2944 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2945 string, not as array of chars.
2947 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2949 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2951 * sparc-opc.c: Added sparclite extended FP operations, and
2952 versions of v9 impdep* instructions permitting specification of
2955 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2957 * i960-dis.c (reg_names): Now const.
2958 (struct sparse_tabent): New type, copied from array type in mem
2960 (ctrl): Local static array ctrl_tab now const.
2961 (cobr): Local static array cobr_tab now const.
2962 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2963 static variable mem_tab no longer explicitly initialized. Changed
2964 mem_init to const array of struct sparse_tabent.
2965 (reg): Local static variable reg_tab no longer explicitly
2966 initialized. Changed reg_init to const array of struct
2968 (ea): Local static array scale_tab now const.
2970 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2973 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2975 * configure.bat: the disassember needs to be enabled for
2976 "objdump -d" to work in djgpp.
2978 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2980 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2981 (invalid_float): Enabled general version, doesn't require running
2982 on ns32k host. Changed to take char* argument, and test for
2983 explicitly specified sizes, instead of using sizeof() on host CPU
2985 (INVALID_FLOAT): Cast first argument.
2986 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2987 list_P032, list_M032): Now const.
2988 (optlist, list_search): Made appropriate arguments now point to
2990 (print_insn_arg): Changed static array of one-character-string
2991 pointers into a static const array of characters; fixed sprintf
2992 statement accordingly.
2994 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2996 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2997 from distribution. A ns32k-dis.c from a previous distribution has
2998 been brought up to date and supports the new interface.
3000 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3002 * configure.in: add bfd_ns32k_arch target support.
3004 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3005 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3007 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3009 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3012 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3014 * h8300-dis.c, mips-dis.c: Don't use true and false.
3016 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3018 * configure.in: Change --with-targets to --enable-targets.
3020 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3022 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3023 opcodes to the first instruction with that opcode, to speed
3024 disassembly of large files. From ralphc@pyramid.com (Ralph
3027 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3029 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3031 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3033 * configure.bat: update to latest makefile.in
3035 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3037 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3038 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3039 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3040 slot insn is in a delay slot.
3041 * z8k-opc.h: (resflg): Fix patterns.
3042 * h8500-opc.h Fix CR insn patterns.
3044 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3046 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3047 "cmpl" before POWER versions, so that gas -many uses them.
3049 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3051 * disassemble.c: New file.
3052 * Makefile.in (OFILES): Add disassemble.o.
3053 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3054 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3055 binutils/configure.in.
3057 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3058 opcode being examined.
3060 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3062 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3063 (insert_ral, insert_ram, insert_ras): New functions.
3064 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3065 RAS for store with update.
3067 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3069 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3070 (edelsohn@npac.syr.edu).
3072 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3074 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3077 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3079 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3081 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3083 * ppc-opc.c (powerpc_operands): The signedp field has been
3084 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3085 instead. Add new operand SISIGNOPT.
3086 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3087 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3088 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3091 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3093 * i386-dis.c (struct private): Renamed to dis_private. `private'
3094 is a reserved word for dynix cc.
3096 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3098 * configure.in: Change error message to refer to bfd/config.bfd
3099 rather than bfd/configure.in.
3101 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3103 * ppc-opc.c: Define POWER2 as short alias flag.
3104 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3107 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3109 * i960-dis.c (print_insn_i960): Don't read a second word for
3110 opcodes 0, 1, 2 and 3.
3112 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3114 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3116 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3118 * m68881-ext.c: Removed; no longer used.
3119 * Makefile.in: Changed accordingly.
3121 * m68k-dis.c (ext_format_68881): Don't declare.
3122 (print_insn_m68k): If an instruction uses place 'i', it uses at
3123 least four fixed bytes.
3124 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3125 extended float, convert to double using floatformat_to_double, not
3126 ieee_extended_to_double, and fetch the data before converting it.
3128 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3130 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3131 davidj@ICSI.Berkeley.EDU (David Johnson).
3133 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3135 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3136 PowerPC uses bdnz[l][a].
3138 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3140 * dis-buf.c, i386-dis.c: Include sysdep.h.
3142 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3144 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3146 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3147 by Motorola PowerPC 601 with PPC_OPCODE_601.
3148 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3149 Disassemble Motorola PowerPC 601 instructions as well as normal
3150 PowerPC instructions.
3152 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3154 * i960-dis.c (reg, mem): Just use a static array instead of
3157 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3159 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3160 condition name index if this is for a negated condition.
3162 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3163 Floating point format for 'H' operand is backwards from normal
3164 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3165 operands (fmpyadd and fmpysub), handle bizarre register
3166 translation correctly for single precision format.
3168 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3169 or 'I' operands if the next format specifier is 'M' (fcmp
3170 condition completer).
3172 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3174 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3175 single number giving a bitmask for the MB and ME fields of an M
3176 form instruction. Change NB to accept 32, and turn it into 0;
3177 also turn 0 into 32 when disassembling. Seperated SH from NB.
3178 (insert_mbe, extract_mbe): New functions.
3179 (insert_nb, extract_nb): New functions.
3180 (SC_MASK): Mask out SA and LK bits.
3181 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3182 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3183 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3184 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3185 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3186 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3187 (powerpc_macros): Define table of macro definitions.
3188 (powerpc_num_macros): Define.
3190 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3191 if PPC_OPERAND_NEXT is set.
3193 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3195 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3196 char. Retrieve contents using bfd_getl32 instead of shifting.
3198 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3200 * ppc-opc.c: New file. Opcode table for PowerPC, including
3201 opcodes for POWER (RS/6000).
3202 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3203 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3204 (CFILES): Add ppc-dis.c.
3205 (ppc-dis.o, ppc-opc.o): New targets.
3206 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3208 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3210 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3211 No space before 'u', 'f', or 'N'.
3213 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3215 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3216 farther than we should.
3218 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3220 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3222 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3224 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3226 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3227 needs it, to prevent reading past the end of a section.
3229 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3231 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3232 Removed t,A case for la; always use t,A(b) case.
3234 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3236 From Ted Lemen <mellon@pepper.ncd.com>
3237 * mips-dis.c (print_insn_arg): Handle 'k'.
3238 * mips-opc.c: Make cache use k, not t.
3240 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3242 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3243 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3244 FLOAT_FORMAT_CODE to put out floating point register names.
3246 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3248 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3250 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3252 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3254 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3256 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3257 larger than 32. Moved dsxx32 variants first for disassembler.
3259 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3261 * z8kgen.c, z8k-opc.h: Add full lda information.
3263 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3265 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3266 movb instructions. Any necessary space will be emitted by
3267 the code to handle nullification completers.
3269 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3271 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3273 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3275 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3276 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3278 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3280 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3282 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3284 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3285 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3287 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3289 * m88k-dis.c (m88kdis): comment change. Remove space after
3291 (printop): handle new arg types DEC and XREG for m88110.
3293 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3295 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3296 type for absolute branch addresses. Delete special
3297 "ble" and "be" code in 'W' operand code.
3299 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3301 * mips-opc.c: Set hazard information correctly for branch
3302 likely instructions.
3304 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3306 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3307 info->fprintf_func for printing and info->print_address_func for
3310 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3312 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3314 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3316 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3317 Corrected second case of "b" for disassembler.
3319 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3321 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3322 to BFD swapping routines to correspond to BFD name changes.
3324 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3326 * mips-opc.c: Change div machine instruction to be z,s,t rather
3327 than s,t. Change div macro to be d,v,t rather than d,s,t.
3328 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3329 rem and remu which generates only the corresponding div
3330 instruction. This is for compatibility with the MIPS assembler,
3331 which only generates the simple machine instruction when an
3332 explicit destination of $0 is used.
3333 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3335 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3337 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3338 WR_31 hazard for bal, bgezal, bltzal.
3340 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3342 * hppa-dis.c (print_insn_hppa): Use print function
3343 from within the disassemble_info, not fprintf_filtered.
3345 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3347 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3348 Law, law@cs.utah.edu.)
3350 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3352 * mips-opc.c ("absu"): Removed.
3355 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3357 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3358 Changed hazard information to distinguish between memory load
3359 delays and coprocessor load delays.
3361 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3363 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3365 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3367 * configure.in: Don't pass cpu to config.bfd.
3369 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3371 * m88k-dis.c (m88kdis): Make class unsigned.
3373 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3375 * alpha-dis.c (print_insn_alpha): One branch format case was
3376 missing the instruction name.
3378 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3380 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3381 Add the arch-specific auxiliary files.
3382 (OFILES): Remove the arch-specific auxiliary files
3383 and use BFD_MACHINES instead of DIS_LIBS.
3384 * configure.in: Set BFD_MACHINES based on --with-targets option.
3386 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3388 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3391 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3393 * sparc-opc.c: Change CONST to const to deal with gcc
3394 -Dconst=__const -traditional.
3396 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3398 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3399 coprocessor instructions out of #if 0, and made them use new
3402 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3404 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3406 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3408 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3409 instruction, for use by the disassembler.
3411 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3412 hand-coded sign extensions that depended on 32-bit host ints.
3413 FIXME, we still depend on big-endian host bitfield ordering.
3414 (sparc_print_insn): Set the insn_info_valid field, and the
3415 other fields that describe the instruction being printed.
3417 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3419 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3420 `jmp' instead of just one of them.
3422 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3424 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3425 (fput_fp_reg_r): Renamed from fput_reg_r.
3426 (fput_fp_reg): New function.
3427 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3429 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3431 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3433 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3435 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3437 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3438 don't output a space.
3440 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3442 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3444 * mips-opc.c: New file, containing opcode table from
3445 ../include/opcode/mips.h.
3446 * Makefile.in: Add it.
3448 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3450 * m88k-dis.c: New file, moved in from gdb and changed to use the
3451 new dis-asm.h disassembler interface.
3452 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3453 (m88k-dis.o): New target.
3455 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3457 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3458 argument string const char * to correspond to opcode/mips.h.
3460 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3462 * mips-dis.c: Updated to account for name changes in new version
3464 * Makefile.in: Added header file dependencies.
3466 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3468 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3470 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3472 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3473 extend, rather than shifts.
3475 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3477 * Makefile.in: Undo 15 June change.
3479 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3481 * m68k-dis.c (print_insn_arg): Change return value to byte count
3483 * m68k-dis.c: Re-write to detect invalid operands before
3484 printing anything, so we can handle this the same way we
3485 handle invalid opcodes.
3487 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3489 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3491 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3493 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3496 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3498 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3500 * configure.in: Do make sysdep.h link.
3501 * Makefile.in: Search ../include. Don't search ../bfd.
3503 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3505 Changes from Jeff Law, law@cs.utah.edu:
3506 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3507 Do not print a space before the completers specified by
3510 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3512 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3513 defined, since gdb has been fixed.
3515 Changes from Jeff Law, law@cs.utah.edu:
3516 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3517 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3518 be a *disassemble_info, not a *FILE.
3519 * hppa-dis.c: Support 'd', '!', and 'a'.
3520 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3521 * hppa-dis.c: Delete cases which are no longer needed.
3523 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3525 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3527 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3529 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3532 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3534 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3535 * configure.in: No longer need to configure to get sysdep.h.
3537 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3539 * Patches from Jeffrey Law <law@cs.utah.edu>.
3540 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3541 templates for 1.1 FP computational instructions.
3543 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3545 * h8500-dis.c (print_insn_h8500): Address argument is type
3547 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3550 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3551 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3553 * sparc-dis.c (compare_opcodes): Move static declaration to
3556 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3558 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3559 instruction, remove unimp hack from 'l' argument.
3561 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3563 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3566 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3568 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3569 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3572 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3574 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3575 arrays of string pointers to 2-d arrays of chars, to save
3578 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3580 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3581 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3583 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3585 * hppa-dis.c: New file from Utah, adapted to new disassembler
3587 * Makefile.in: Include it.
3589 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3591 * sh-dis.c, sh-opc.h: New files.
3593 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3595 * alpha-dis.c, alpha-opc.h: New files.
3597 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3599 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3602 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3604 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3606 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3608 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3611 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3613 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3614 and double percent signs a few places.
3616 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3618 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3619 Use info->print_address_func not print_address.
3621 * dis-buf.c (generic_print_address): New function.
3623 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3625 * Makefile.in: Add sparc-dis.c.
3626 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3628 Add `add' instruction to the set that get checked
3629 for a preceding `sethi' in order to print an absolute address.
3630 * (print_insn): Disassembly prefers real instructions.
3631 (is_delayed_branch): Speed up.
3632 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3633 Still missing some float ops, and needs testing.
3634 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3635 F_ALIAS. Use printf, not fprintf, when not passing a file
3637 (compare_opcodes): Check that identical instructions have
3638 identical opcodes, complain otherwise.
3641 * Include reg_names.
3643 Use dis-asm.h/read_memory_func interface.
3645 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3647 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3648 deliberately return non-zero to setjmp from longjmp. Otherwise
3649 this code fails to compile.
3651 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3653 * m68k-dis.c: Fix prototype for fetch_arg().
3655 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3657 * dis-buf.c: New file, for new read_memory_func interface.
3658 Makefile.in (OFILES): Include it.
3659 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3660 Use new read_memory_func interface.
3662 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3664 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3665 * h8500-opc.h: Fix couple of opcodes.
3667 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3669 * Makefile.in: add dvi & installcheck targets
3671 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3673 * Makefile.in: Update for h8500-dis.c.
3675 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3677 * h8500-dis.c, h8500-opc.h: New files
3679 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3681 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3682 ../include/dis-asm.h.
3683 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3684 and ../gdb/m68k-pinsn.c).
3685 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3686 and ../gdb/i386-pinsn.c).
3687 * m68881-ext.c: New file. Moved definition of
3688 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3689 * Makefile.in: Adjust for new files.
3690 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3691 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3692 can be dis-assembled.
3694 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3696 * mips-dis.c (print_insn_arg): Now returns void.
3698 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3700 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3701 files that use the macros.
3703 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3705 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3706 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3707 (CFILES): Added mips-dis.c.
3709 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3711 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3712 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3714 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3716 * Makefile.in: Improve *clean rules.
3717 * configure.in: Allow a default host.
3719 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3721 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3722 files include other sysdep files
3724 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3726 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3728 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3730 * configure.in: For host support, use ../bfd/configure.host
3731 so it stays in sync with the ../bfd/hosts database.
3733 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3735 * configure.in: use cpu-vendor-os triple instead of nested cases
3737 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3739 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3740 *always* the wrong one.
3742 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3744 * z8kgen.c: added copyright info
3746 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3748 * z8k-dis.c (unparse_instr): prettier tabs
3749 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3751 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3753 * configure.in: Add ncr* configuration.
3754 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3755 picayune ANSI compilers happy.
3757 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3759 * configure.in (i386): Make i386 and i486 synonymous for now.
3760 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3762 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3764 * Makefile.in (install): Fix typo.
3766 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3768 * Makefile.in (make): Remove obsolete crud.
3769 (sparc-opc.o): Avoid Sun Make VPATH bug.
3771 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3773 * Makefile.in: since there are no SUBDIRS, remove rule and
3774 references of subdir_do.
3776 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3778 * Makefile.in (install): Get the library name right here too.
3779 Don't install bfd.h, since it's unrelated to this library. No
3780 subdirs to recurse into, either.
3781 (CFILES): The source file has a .c suffix, not .o.
3783 * sparc-opc.c: New file, moved from BFD.
3784 * Makefile.in (OFILES): Build it.
3786 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3788 * z8k-dis.c: fixed forward refferences of some declarations.
3790 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3792 * Makefile.in: get the name of the library right
3794 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3796 * z8k-dis.c: knows how to disassemble z8k stuff
3797 * z8k-opc.h: new file full of z8000 opcodes
3801 version-control: never