2 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
5 correct. Get sld.[bhw] and sst.[bhw] closer.
7 * v850-opc.c (v850_operands): "not" is a two byte insn
9 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
11 * v850-opc.c (v850_operands): D16 inserts at offset 16!
13 * v850-opc.c (two): Get order of words correct.
15 * v850-opc.c (v850_operands): I16 inserts at offset 16!
17 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
18 register source and destination operands.
19 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
21 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
22 same thinko in "trap" opcode.
24 * v850-opc.c (v850_opcodes): Add initializer for size field
27 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
28 Add D8 for 8-bit unsigned field in short load/store insns.
29 (IF4A, IF4D): These both need two registers.
30 (IF4C, IF4D): Define. Use 8-bit unsigned field.
31 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
32 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
33 for "ldsr" and "stsr".
34 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
37 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
38 short store word (sst.w).
40 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
42 * v850-opc.c (v850_operands): Added insert and extract fields,
43 pointers to functions that handle unusual operand encodings.
45 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
47 * v850-opc.c (v850_opcodes): Enable "trap".
49 * v850-opc.c (v850_opcodes): Fix order of displacement
50 and register for "set1", "clr1", "not1", and "tst1".
52 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
54 * v850-opc.c (v850_operands): Add "B3" support.
55 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
58 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
60 * v850-opc.c: Close unterminated comment.
62 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
64 * v850-opc.c (v850_operands): Add flags field.
65 (v850_opcodes): add move opcodes.
67 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
69 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
70 * configure: (bfd_v850v_arch) Add new case.
71 * configure.in: (bfd_v850_arch) Add new case.
72 * v850-opc.c: New file.
75 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
77 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
80 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
82 * d10v-opc.c: Add additional information to the opcode
83 table to help determinine which instructions can be done
87 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
89 * mpw-make.sed: Update editing of include pathnames to be
92 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
94 * arm-opc.h: Added "bx" instruction definition.
96 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
98 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
101 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
103 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
105 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
107 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
110 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
112 * makefile.vms: Update for alpha-opc changes.
114 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
116 * i386-dis.c (print_insn_i386): Actually return the correct value.
117 (ONE, OP_ONE): #ifdef out; not used.
120 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
122 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
123 Changed subi operand type to treat 0 as 16.
126 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
128 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
131 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
133 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
134 memory transfer instructions. Add new format string entries %h and %s.
135 * arm-dis.c: (print_insn_arm): Provide decoding of the new
139 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
141 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
142 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
145 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
147 * alpha-dis.c (print_insn_alpha_osf): Remove.
148 (print_insn_alpha_vms): Remove.
149 (print_insn_alpha): Make globally visible. Chose the register
150 names based on info->flavour.
151 * disassemble.c: Always return print_insn_alpha for the alpha.
154 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
156 * d10v-dis.c (dis_long): Handle unknown opcodes.
158 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
160 * d10v-opc.c: Changes to support signed and unsigned numbers.
161 All instructions with the same name that have long and short forms
162 now end in ".l" or ".s". Divs added.
163 * d10v-dis.c: Changes to support signed and unsigned numbers.
165 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
167 * d10v-dis.c: Change all functions to use info->print_address_func.
170 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
172 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
173 move ccr/sr insns more strict so that the disassembler only
174 selects them when the addressing mode is data register.
177 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
178 * d10v-opc.c (pre_defined_registers): Declare.
179 * d10v-dis.c (print_operand): Now uses pre_defined_registers
180 to pick a better name for the registers.
183 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
185 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
186 operands for fexpand and fpmerge. From Christian Kuehnke
187 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
189 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
191 * alpha-dis.c (print_insn_alpha): No longer the user-visible
192 print routine. Take new regnames and cpumask arguments.
193 Kill the environment variable nonsense.
194 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
195 (print_insn_alpha_vms): New function. Do VMS style regnames.
196 * disassemble.c (disassembler): Test bfd flavour to pick
197 between OSF and VMS routines. Default to OSF.
199 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
201 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
202 * configure: Rebuild.
203 * Makefile.in (install): Use @INSTALL_SHLIB@.
206 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
208 * configure: (bfd_d10v_arch) Add new case.
209 * configure.in: (bfd_d10v_arch) Add new case.
210 * d10v-dis.c: New file.
211 * d10v-opc.c: New file.
212 * disassemble.c (disassembler) Add entry for d10v.
215 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
217 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
218 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
220 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
222 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
223 distinguish between variants of the instruction set.
224 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
225 distinguish between variants of the instruction set.
227 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
229 * i386-dis.c (print_insn_i8086): New routine to disassemble using
230 the 8086 instruction set.
231 * i386-dis.c: General cleanups. Make most things static. Add
232 prototypes. Get rid of static variables aflags and dflags. Pass
233 them as args (to almost everything).
235 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
237 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
239 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
241 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
242 if the next arg is marked with SRC_IN_DST. Gross.
244 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
245 we're looking for and find EXR.
247 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
248 if we're looking for KBIT and we don't find it.
250 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
253 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
254 3bit immediate operands.
256 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
258 * Released binutils 2.7.
260 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
261 <kkaempf@progis.ac-net.de>.
263 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
265 * alpha-opc.c: Correct second case of "mov" to use OPRL.
267 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
269 * sparc-dis.c (print_insn_sparclite): New routine to print
270 sparclite instructions.
272 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
274 * m68k-opc.c (m68k_opcodes): Add coldfire support.
276 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
278 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
279 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
280 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
282 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
284 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
285 Use autoconf-set values.
286 (docdir, oldincludedir): Removed.
287 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
289 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
291 * alpha-opc.c: New file.
292 * alpha-opc.h: Remove.
293 * alpha-dis.c: Complete rewrite to use new opcode table.
294 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
295 * configure: Rebuild with autoconf 2.10.
296 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
297 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
299 (alpha-opc.o): New target.
301 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
303 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
304 Set imm_added_to_rs1 even if the source and destination register
307 * sparc-opc.c: Add some two operand forms of the wr instruction.
309 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
311 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
314 * disassemble.c (disassembler): Handle H8/S.
315 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
317 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
319 * sparc-opc.c: Add beq/teq as aliases for be/te.
321 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
322 <sergei@msil.sps.mot.com>.
324 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
326 * makefile.vms: New file.
328 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
330 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
332 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
335 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
337 * i386-dis.c (OP_OFF): Call append_prefix.
339 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
341 * ppc-opc.c (instruction encoding macros): Add explicit casts to
342 unsigned long to silence a warning from the Solaris PowerPC
345 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
347 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
349 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
351 * sparc-dis.c (X_IMM,X_SIMM): New macros.
353 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
354 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
355 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
356 cpush, cpusha, cpull sparclet insns.
358 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
360 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
362 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
364 * sparc-opc.c: Set F_FBR on floating point branch instructions.
365 Set F_FLOAT on other floating point instructions.
367 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
369 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
371 (powerpc_opcodes): Add 860/821 specific SPRs.
373 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
375 * configure.in: Permit --enable-shared to specify a list of
376 directories. Set and substitute BFD_PICLIST.
377 * configure: Rebuild.
378 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
379 uses. Set to @BFD_PICLIST@.
381 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
383 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
384 not "abs", which may be needed for the absolute in something
385 like btst #0,@10:8. Print L_3 immediates separately from other
386 immediates. Change ABSMOV reference to ABS8MEM.
388 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
390 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
391 (current_arch_mask): New static global.
392 (compute_arch_mask): New static function.
393 (print_insn_sparc): Delete sparc_v9_p. New static local
394 current_mach. Resort opcode table if current_mach changes.
395 Generalize "insn not supported" test.
396 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
397 Delete test for v9/!v9.
398 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
400 (brfc): Split into CBR and FBR for coprocessor/fp branches.
401 (brfcx): Renamed to FBRX.
402 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
403 coprocessor mnemonics are not supported on the sparclet).
404 (condf): Renamed to CONDF.
405 (SLCBCC2): Delete F_ALIAS flag.
407 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
409 * sparc-opc.c (sparc_opcodes): rd must be 0 for
410 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
412 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
414 * Makefile.in (config.status): Depend upon BFD VERSION file, so
415 that the shared library version number is set correctly.
417 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
419 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
420 Miles Bader <miles@gnu.ai.mit.edu>.
421 * configure: Rebuild.
423 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
425 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
428 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
430 * configure: Rebuild with autoconf 2.8.
432 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
434 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
435 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
437 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
439 * configure.in: Don't set SHLIB or SHLINK to an empty string,
440 since they appear as targets in Makefile.in.
441 * configure: Rebuild.
443 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
445 * mpw-make.sed: Edit out shared library support bits.
447 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
449 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
450 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
451 (sparc_opcodes): Add sparclet insns.
452 (sparclet_cpreg_table): New static local.
453 (sparc_{encode,decode}_sparclet_cpreg): New functions.
454 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
456 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
458 * i386-dis.c (index16): New static variable.
459 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
461 (OP_indirE): Return result of OP_E.
462 (OP_E): Check for 16 bit addressing mode, and disassemble
463 correctly. Optimised 32 bit case a little. Don't print
464 "(base,index,scale)" when sib specifies only an offset.
466 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
468 * configure.in: Set and substitute SHLIB_DEP.
469 * configure: Rebuild.
470 * Makefile.in (SHLIB_DEP): New variable.
471 (LIBIBERTY_LISTS, BFD_LIST): New variables.
472 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
473 COMMON_SHLIB, add them to piclist with appropriate modifications.
474 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
475 here: just use piclist.
477 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
479 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
480 (print_insn_sparc): Rewrite v9/not-v9 tests.
481 (compare_opcodes): Likewise.
482 * sparc-opc.c (MASK_<ARCH>): Define.
483 (v6,v7,v8,sparclite,v9,v9a): Redefine.
484 (sparclet,v6notv9): Define.
485 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
486 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
488 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
490 * configure.in: Call AC_PROG_CC before configure.host.
491 * configure: Rebuild.
493 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
495 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
497 * i386-dis.c (onebyte_has_modrm): New static array.
498 (twobyte_has_modrm): New static array.
499 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
501 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
503 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
506 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
508 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
511 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
513 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
514 m68010up, not just m68020up | cpu32.
516 * Makefile.in (SONAME): New variable.
517 ($(SHLINK)): Make a link to the transformed name, as well.
518 (stamp-tshlink): New target.
519 (install): Skip stamp-tshlink during install.
521 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
523 * configure.in: Call AC_ARG_PROGRAM.
524 * configure: Rebuild.
525 * Makefile.in (program_transform_name): New variable.
526 (install): Transform library name before installing it.
528 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
530 * i960-dis.c (mem): Add HX dcinva instruction.
532 Support for building as a shared library, based on patches from
533 Alan Modra <alan@spri.levels.unisa.edu.au>:
534 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
535 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
536 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
537 * configure: Rebuild.
538 * Makefile.in (ALLLIBS): New variable.
539 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
540 (COMMON_SHLIB, SHLINK): New variables.
541 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
542 (STAGESTUFF): Remove variable.
543 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
544 (stamp-piclist, piclist): New targets.
545 ($(SHLIB), $(SHLINK)): New targets.
546 ($(OFILES)): Depend upon stamp-picdir.
547 (disassemble.o): Build twice if PICFLAG is set.
548 (MOSTLYCLEAN): Add pic/*.o.
549 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
550 (distclean): Remove pic and stamp-picdir.
551 (install): Install shared libraries.
552 (stamp-picdir): New target.
554 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
556 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
557 Print unknown instruction as "unknown", rather than in hex.
559 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
561 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
563 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
565 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
567 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
569 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
570 when necessary. From Ulrich Drepper
571 <drepper@myware.rz.uni-karlsruhe.de>.
573 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
575 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
576 sparc_num_opcodes. Update architecture enum values.
577 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
578 (sparc_opcode_lookup_arch): New function.
579 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
580 (sparc_opcodes): Add v9a shutdown insn.
582 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
584 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
585 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
587 (print_insn_sparc64): Deleted.
588 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
591 * sparc-opc.c (architecture_pname): Add v9a.
593 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
595 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
596 incorrectly defined as 0x16 when it should be 0x15.
597 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
598 (alpha_insn_set): added cvtst and cvttq float ops. Also added
599 excb (exception barrier) which is defined in the Alpha
600 Architecture Handbook version 2.
601 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
602 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
603 disassembled as or, for example.
605 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
607 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
608 (_print_insn_mips): Change i from int to unsigned int.
610 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
612 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
613 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
615 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
617 * i386-dis.c: Added Pentium Pro instructions.
619 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
621 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
624 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
626 * sh-opc.h (sh_nibble_type): Added REG_B.
627 (sh_arg_type): Added A_REG_B.
628 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
630 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
632 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
634 * disassemble.c (disassembler): Use new bfd_big_endian macro.
636 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
638 * Makefile.in (distclean): Remove stamp-h. From Ronald
639 F. Guilmette <rfg@monkeys.com>.
641 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
643 From David Mosberger-Tang <davidm@azstarnet.com>:
644 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
647 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
649 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
650 (sh_table): Added many SH3 opcodes.
651 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
653 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
655 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
656 (subco,subco.): Mark this PPC, not PPCCOM.
658 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
660 * configure: Rebuild with autoconf 2.7.
662 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
664 * configure: Rebuild with autoconf 2.6.
666 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
668 * configure.in: Sort list of architectures. Accept but do nothing
669 for alliant, convex, pyramid, romp, and tahoe.
671 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
673 * a29k-dis.c (print_special): Change num to unsigned int.
675 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
677 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
680 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
682 * configure.in: Call AC_CHECK_PROG to find and cache AR.
683 * configure: Rebuilt.
685 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
687 * configure.in: Add case for bfd_i860_arch.
688 * configure: Rebuild.
690 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
692 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
693 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
694 (NEXTDOUBLE): Likewise.
695 (print_insn_m68k): Don't match fmoveml if there is more than one
696 register in the list.
697 (print_insn_arg): Handle a place of '8' for a type of 'L'.
699 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
701 * m68k-opc.c: Use #W rather than #w.
702 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
704 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
706 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
707 and likewise for all the dbxx opcodes.
709 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
711 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
713 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
715 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
716 the VR4100 specific instructions to the mips_opcodes structure.
718 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
720 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
721 ugly Metrowerks bug in CW6, is fixed in CW7.
723 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
725 * ppc-opc.c (whole file): Add flags for common/any support.
727 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
729 * Makefile.in (BISON): Remove macro.
730 (FLAGS_TO_PASS): Remove BISON.
732 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
734 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
736 * m68k-dis.c (print_insn_m68k): Recognize all two-word
737 instructions that take no args by looking at the match mask.
738 (print_insn_arg): Always print "%" before register names.
739 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
740 [case '_']: Don't print "@#" before address.
741 [case 'J']: Use "%s" as format string, not register name.
742 [case 'B']: Treat place == 'C' like 'l' and 'L'.
744 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
746 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
749 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
751 From David Mosberger-Tang <davidm@azstarnet.com>
753 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
754 (alpha_insn_set): added definitions for VAX floating point
755 instructions (Unix compilers don't generate these, but handcoded
756 assembly might still use them).
758 * alpha-dis.c (print_insn_alpha): added support for disassembling
759 the miscellaneous instructions in the Alpha instruction set.
761 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
763 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
764 no longer create sysdep.h, sed ppc-opc.c to work around a
765 serious Metrowerks C bug.
766 * mpw-make.in: Remove.
767 * mpw-make.sed: New file, used by mpw-configure to edit
768 Makefile.in into an MPW makefile.
770 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
772 * Makefile.in (maintainer-clean): New synonym for realclean.
774 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
776 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
777 which use '0', '1', and '2' instead. Specify the proper size for
778 a pmove immediate operand. Correct the pmovefd patterns to be
779 moves to a register, not from a register.
780 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
782 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
784 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
785 %psr, %wim, %tbr as F_NOTV9.
787 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
789 * Makefile.in (Makefile): Just rebuild Makefile when running
791 (config.h, stamp-h): New targets.
792 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
793 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
795 * configure: Rebuild.
797 * mips-opc.c: Change unaligned loads and stores with "t,A"
798 operands to use "t,A(b)".
800 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
802 * sh-dis.c (print_insn_shx): Add F_FR0 support.
804 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
806 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
807 until 3 instead of until 2.
809 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
811 * Makefile.in (ALL_CFLAGS): Define.
812 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
813 (MOSTLYCLEAN): Add config.log.
814 (distclean): Don't remove config.log.
815 * configure.in: Substitute HDEFINES.
816 * configure: Rebuild.
818 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
820 * sh-opc.h (sh_arg_type): Add F_FR0.
821 (sh_table, case fmac): Add F_FR0 as first argument.
823 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
825 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
827 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
829 * sparc-dis.c: Remove all references to NO_V9.
831 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
833 * aclocal.m4: Just include ../bfd/aclocal.m4.
834 * configure: Rebuild.
836 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
838 * sparc-dis.c (X_DISP19): Define.
839 (print_insn, case 'G'): Use it.
840 (print_insn, case 'L'): Sign extend displacement.
842 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
844 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
845 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
846 host_makefile_frag or frags.
847 * aclocal.m4: New file.
848 * configure: Rebuild.
849 * Makefile.in (INSTALL): Set to @INSTALL@.
850 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
851 (INSTALL_DATA): Set to @INSTALL_DATA@.
853 (AR_FLAGS): Set to rc rather than qc.
854 (CC): Define as @CC@.
855 (CFLAGS): Set to @CFLAGS@.
856 (@host_makefile_frag@): Remove.
857 (config.status): Remove dependency upon @frags@.
859 * configure.in: ../bfd/config.bfd now just sets shell variables.
860 Use them rather than looking through target Makefile fragments.
861 * configure: Rebuild.
863 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
865 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
867 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
869 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
870 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
873 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
874 (lookup_{name,value}): New functions.
875 (prefetch_table): New static local.
876 (sparc_{encode,decode}_prefetch): New functions.
877 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
879 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
881 * sh-opc.h: Add blank lines to improve readabililty of sh3e
884 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
886 * sh-dis.c: Correct comment on first line of file.
888 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
890 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
892 * sparc-opc.c (asi, membar): New static locals.
893 (sparc_{encode,decode}_{asi,membar}): New functions.
894 (sparc_opcodes, membar insn): Fix.
895 * sparc-dis.c (print_insn): Call sparc_decode_asi.
896 Support decoding of membar masks.
899 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
901 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
903 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
905 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
906 and likewise for the other branches. Add bhs as an alias for bcc,
907 and likewise for the size variants. Add dbhs as an alias for
910 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
912 * sh-opc.h (FP sts instructions): Update to match reality.
914 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
916 * m68k-dis.c: (fpcr_names): Add % before all register names.
917 (reg_names): Likewise.
918 (print_insn_arg): Don't explicitly print % before register names.
919 Add % before register names in static array names. In case 'r',
920 print data registers as `@(Dn)', not `Dn@'. When printing a
921 memory address, don't print @# before it.
922 (print_indexed): Change base_disp and outer_disp from int to
923 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
924 syntax. Sign extend 8 byte displacement correctly.
925 (print_base): Print using MIT syntax. Print zpc when appropriate.
926 Change parameter disp from int to bfd_vma.
928 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
931 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
933 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
934 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
935 * sh-opc.h (sh_arg_type): Add new operand types.
936 (sh_table): Add new opcodes from SH3E Floating Point ISA.
938 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
940 * Makefile.in (distclean): Remove generated file config.h.
942 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
944 * Makefile.in (distclean): Remove generated file config.h.
946 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
948 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
950 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
952 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
953 rather than numopcodes. Use m68k_opcodes rather than removed
954 opcode function. Don't check F_ALIAS.
955 (print_insn_arg): Change first parameter to be const char *.
956 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
957 (m68k-opc.o): New target.
958 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
959 * configure: Rebuild.
961 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
963 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
964 (opcode_bits, opcode_hash_table): New variables.
965 (opcodes_initialized): Renamed from opcodes_sorted.
966 (build_hash_table): New function.
967 (is_delayed_branch): Use hash table.
968 (print_insn): Renamed from print_insn_sparc, made static.
969 Build and use hash table. If !sparc64, ignore sparc64 insns,
970 and vice-versa if sparc64.
971 (print_insn_sparc, print_insn_sparc64): New functions.
972 (compare_opcodes): Move sparc64 opcodes to end.
973 Print commutative insns with constant second.
974 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
976 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
978 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
979 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
980 avoids printing a delay slot in a delay slot.
981 * sh-opc.h (sh_table): Fully bracket last entry.
983 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
985 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
987 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
989 * configure.in: Get host_makefile_frag from ${srcdir}.
991 * configure.in: Autoconfiscated. Check for string[s].h. Create
992 config.h from config.in. Don't set up sysdep.h link.
993 * sysdep.h: New file.
994 * configure, config.in: New files, generated from configure.in.
995 * Makefile.in: Updated to be processed autoconf-style.
996 (distclean): Keep sysdep.h. Remove config.log and config.cache.
997 (Makefile): Depend on config.status.
998 (config.status): New rule.
999 * configure.bat: Update Makefile substitutions.
1001 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1003 * mips-opc.c (L1): Define.
1004 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1005 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1008 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1010 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1011 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1012 have multiple add units but only a single logical unit.
1014 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1015 shifted by 18, without any insertion or extraction function.
1016 (insert_cr, extract_cr): Remove.
1019 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1021 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1024 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1026 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1029 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1031 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1032 * sh-opc.h: Add copyright.
1034 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1036 * Makefile.in (crunch-m68k): Delete extra target accidentally
1037 checked in a while ago.
1039 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1041 * sh-opc.h (sh_table): Add SH3 support.
1043 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1045 * sh-opc.h: Added bsrf and braf.
1047 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1049 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1050 bogus [ls]fm{ea,fd} patterns.
1052 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1053 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1054 initialize it from memory. Make function static.
1055 (print_insn_{big,little}_arm): New functions.
1056 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1057 the correct endianness.
1060 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1062 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1063 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1066 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1068 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1071 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1073 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1074 17th, so that it builds again using GCC as the compiler.
1076 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1078 * mips-dis.c (print_insn_little_mips): Cast return value from
1079 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1080 expects an unsigned long, and that might be fewer words of
1081 argument storage (e.g., if bfd_vma is long long on a 32-bit
1083 (print_insn_big_mips): Likewise with bfd_getb32 value.
1084 (_print_insn_mips): Now static.
1086 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1088 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1089 gcc memory hog problem with initializer is fixed.
1092 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1094 * arc-opc.c (NULL): Define.
1095 (arc_operands, insn fields u,s): Delete.
1096 (arc_operands, insn fields a,b,c): Mark as signed.
1097 (arc_opcodes): No longer const, links computed at run-time.
1098 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1099 suffixes that affect the insn code.
1100 (arc_opcodes): Resort table to macros are first.
1101 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1102 (arc_opcodes, st [b] entry): Likewise.
1103 (arc_opcodes, st [b,d] entry): Fix mask, value.
1104 (arc_reg_names): Add entries for r29, r30, r31, r60.
1105 (opcode_map, icode_map): New static globals.
1106 (arc_opcode_init_tables): Initialize them.
1107 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1108 (insert_shimmoffset): Signal error if register present.
1110 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1113 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1115 Merge in support for Mac MPW as a host.
1116 (Old change descriptions retained for informational value.)
1118 * mpw-config.in (archname): Compute from the config.
1119 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1121 * mpw-config.in (target_arch): Compute from canonical target.
1122 (m68k, mips, powerpc, sparc): Add architectures.
1123 * mpw-make.in (disassemble.c.o): Add.
1124 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1126 * mpw-config.in (BFD_MACHINES): Set to a default value.
1127 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1129 * mpw-make.in (CSEARCH): Add extra-include to search path.
1131 * mpw-config.in (varargs.h): Don't create.
1132 (sysdep.h): Create using forward-include.
1133 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1135 * mpw-config.in: New file, MPW version of configure.in.
1136 * mpw-make.in: New file, MPW version of Makefile.in.
1139 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1141 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1142 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1143 (print_insn_*): Pass bfd mach number, not opcode version.
1144 * arc-opc.c (arc_get_opcode_mach): New function.
1147 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1149 * alpha-dis.c (print_insn_alpha): Put empty statement after
1152 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1154 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1155 (low_sign_extend): Likewise.
1156 (get_field): Delete unused function.
1157 (set_field, deposit_14, deposit_21): Likewise.
1159 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1161 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1164 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1166 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1168 * alpha-opc.h (OSF_ASMCODE): define
1169 print pal-code names as defined in App C of the
1170 Alpha Architecture Reference Manual
1172 * alpha-dis.c: cleaned up output
1173 print stylized code forms as defined in App A.4.3 of the
1174 Alpha Architecture Reference Manual
1176 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1178 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1180 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1183 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1185 * m68k-dis.c (opcode): New function. Returns address of opcode
1186 table entry given index, even if the opcode table was split to
1187 work around gcc bugs.
1188 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1190 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1191 (reg_names): Now const.
1192 (print_insn_arg): Arrays cacheFieldName and names now const.
1193 (print_indexed): Array scales now const.
1196 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1198 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1199 (print_insn_arc_{host,graphics,audio}): Likewise.
1200 (print_insn): Add prototype.
1201 (arc_get_disassembler): New arg `big_p'. Return little or big
1202 print fn accordingly.
1203 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1204 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1205 (arc_opval_supported): Likewise.
1206 * disassemble.c (disassembler): Pass big endian flag to
1207 arc_get_disassembler.
1210 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1212 * ppc-opc.c: Sort recently added instructions by minor opcode
1213 number within major opcode number.
1215 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1217 * hppa-dis.c: Include libhppa.h.
1219 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1221 * mips-opc.c: Change dli to use M_DLI, and add dla.
1223 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1225 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1228 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1230 * arc-dis.c (arc_get_disassembler): Change argument to int,
1231 one of bfd_mach_arc_xxx. All callers updated.
1234 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1236 * mips-opc.c: Add r4650 mul instruction.
1238 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1240 * mips-opc.c: Add uld and usd macros for unaligned double load and
1243 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1245 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1246 mfdcr, mtdcr, icbt, iccci.
1249 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1251 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1252 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1253 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1254 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1255 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1256 (insert_absaddr): New function.
1258 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1260 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1261 New argument `cpu', pass it to arc_opcode_init_tables.
1262 Document byte order dependencies. Ignore unsupported insns.
1263 (arc_get_disassembler): New function.
1264 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1265 print_insn_arc_audio): New functions.
1266 * arc-opc.c (MULTSHIFT operand): Delete.
1267 (UNSIGNED, SATURATION): New operands.
1268 (mac, mul, mul64, mulu64): New insns.
1269 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1270 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1271 (host,graphics,audio extended and auxiliary regs): Define.
1272 (ss, sc, mh, ml): New suffixes.
1273 (arc_opcode_supported, arc_opval_supported): New functions.
1274 (insert_multshift, extract_multshift): Deleted.
1275 * disassemble.c (disassembler, case bfd_arch_arc): Call
1276 arc_get_disassembler to get disassembler routine.
1279 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1281 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1282 signed char fields to shorts, more portable.
1284 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1286 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1287 char fields as signed chars, since they may have negative values.
1289 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1291 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1292 (mycroft@netbsd.org).
1294 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1296 From "Logg, Ed" <elogg@ea.com>:
1297 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1298 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1301 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1303 * ppc-opc.c: Changes based on patch from David Edelsohn
1304 <edelsohn@mhpcc.edu>.
1305 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1308 (insert_tbr): New static function.
1309 (extract_tbr): New static function.
1310 (XFXFXM_MASK, XFXM): Define.
1311 (XSPRBAT_MASK, XSPRG_MASK): Define.
1312 (powerpc_opcodes): Add instructions to access special registers by
1313 name. Add mtcr and mftbu.
1315 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1317 * mips-opc.c (P3): Define.
1318 (mips_opcodes): Add mad and madu.
1320 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1322 * configure.in: Add W65 support.
1323 * disassemble.c: Likewise.
1324 * w65-opc.h, w65-dis.c: New files.
1326 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1328 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1332 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1334 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1336 * arc-opc.c (extract_reladdr): New function.
1337 (insert_reladdr): Store address right-shifted by 2.
1340 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1342 * mips-opc.c: Add dli as a synonym for li.
1345 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1347 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1349 (extraction fns): Insn argument now array of two words. Return pointer
1350 to value's table entry. All uses changed.
1351 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1352 (insert_multshift, extract_multshift): New fns.
1353 (arc_operands): Add support for cache bypass suffix. Add support for
1354 predefined aux regs. Modifier bits moved to flags field.
1355 (arc_opcodes): Likewise.
1356 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1357 New insn rlc. Update to syntax in programmer's manual.
1358 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1359 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1361 (arc_opcode_init_tables): New argument to indicate cpu type.
1362 (insert_reg): Handle predefined aux regs.
1363 (extract_reg): Likewise.
1364 (lookup_register): New fn.
1365 * arc-dis.c (arc_condition_codes): Deleted.
1366 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1367 Clean up modifier handling. Handle predefined aux regs.
1370 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1372 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1373 print something for reserved opcode values, even if it won't
1376 * mips-dis.c (_print_insn_mips): When initializing, shift right
1377 and mask, to avoid sign extension problems on the Alpha.
1379 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1383 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1385 * configure.in: Add ARC support.
1386 * disassemble.c: Likewise.
1387 * arc-dis.c, arc-opc.c: New files.
1390 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1392 * sh-opc.h (mov.l gbr): Get direction right.
1393 * sh-dis.c (print_insn_shx): New function.
1394 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1395 print opcodes with right byte order.
1397 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1399 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1400 to avoid conflicts with getopt.
1402 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1404 * hppa-dis.c (print_insn_hppa): Read the instruction using
1405 bfd_getb32, so that it works on a little endian or 64 bit host.
1406 Remove unused local variable op.
1408 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1410 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1411 addu does not work correctly if -mips3.
1413 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1415 * a29k-dis.c (print_special): Add special register names defined
1416 on 29030, 29040 and 29050.
1417 (print_insn): Handle new operand type 'I'.
1419 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1421 * Makefile.in (INSTALL): Use top level install.sh script.
1423 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1425 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1426 that it works on a little endian host.
1428 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1430 * configure.in: Use ${config_shell} when running config.bfd.
1432 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1434 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1436 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1438 * a29k-dis.c (print_insn): Print the opcode.
1440 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1442 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1444 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1446 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1448 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1450 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1451 which store a value into memory.
1453 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1455 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1456 * arm-dis.c, arm-opc.h: New files.
1458 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1460 * Makefile.in (ns32k-dis.o): Add dependency.
1461 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1462 string, not as array of chars.
1464 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1466 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1468 * sparc-opc.c: Added sparclite extended FP operations, and
1469 versions of v9 impdep* instructions permitting specification of
1472 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1474 * i960-dis.c (reg_names): Now const.
1475 (struct sparse_tabent): New type, copied from array type in mem
1477 (ctrl): Local static array ctrl_tab now const.
1478 (cobr): Local static array cobr_tab now const.
1479 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1480 static variable mem_tab no longer explicitly initialized. Changed
1481 mem_init to const array of struct sparse_tabent.
1482 (reg): Local static variable reg_tab no longer explicitly
1483 initialized. Changed reg_init to const array of struct
1485 (ea): Local static array scale_tab now const.
1487 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1490 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1492 * configure.bat: the disassember needs to be enabled for
1493 "objdump -d" to work in djgpp.
1495 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1497 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1498 (invalid_float): Enabled general version, doesn't require running
1499 on ns32k host. Changed to take char* argument, and test for
1500 explicitly specified sizes, instead of using sizeof() on host CPU
1502 (INVALID_FLOAT): Cast first argument.
1503 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1504 list_P032, list_M032): Now const.
1505 (optlist, list_search): Made appropriate arguments now point to
1507 (print_insn_arg): Changed static array of one-character-string
1508 pointers into a static const array of characters; fixed sprintf
1509 statement accordingly.
1511 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1513 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1514 from distribution. A ns32k-dis.c from a previous distribution has
1515 been brought up to date and supports the new interface.
1517 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1519 * configure.in: add bfd_ns32k_arch target support.
1521 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1522 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1524 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1526 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1529 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1531 * h8300-dis.c, mips-dis.c: Don't use true and false.
1533 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1535 * configure.in: Change --with-targets to --enable-targets.
1537 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1539 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1540 opcodes to the first instruction with that opcode, to speed
1541 disassembly of large files. From ralphc@pyramid.com (Ralph
1544 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1546 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1548 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1550 * configure.bat: update to latest makefile.in
1552 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1554 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1555 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1556 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1557 slot insn is in a delay slot.
1558 * z8k-opc.h: (resflg): Fix patterns.
1559 * h8500-opc.h Fix CR insn patterns.
1561 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1563 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1564 "cmpl" before POWER versions, so that gas -many uses them.
1566 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1568 * disassemble.c: New file.
1569 * Makefile.in (OFILES): Add disassemble.o.
1570 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1571 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1572 binutils/configure.in.
1574 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1575 opcode being examined.
1577 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1579 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1580 (insert_ral, insert_ram, insert_ras): New functions.
1581 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1582 RAS for store with update.
1584 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1586 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1587 (edelsohn@npac.syr.edu).
1589 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1591 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1594 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1596 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1598 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1600 * ppc-opc.c (powerpc_operands): The signedp field has been
1601 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1602 instead. Add new operand SISIGNOPT.
1603 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1604 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1605 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1608 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1610 * i386-dis.c (struct private): Renamed to dis_private. `private'
1611 is a reserved word for dynix cc.
1613 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1615 * configure.in: Change error message to refer to bfd/config.bfd
1616 rather than bfd/configure.in.
1618 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1620 * ppc-opc.c: Define POWER2 as short alias flag.
1621 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1624 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1626 * i960-dis.c (print_insn_i960): Don't read a second word for
1627 opcodes 0, 1, 2 and 3.
1629 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1631 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1633 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1635 * m68881-ext.c: Removed; no longer used.
1636 * Makefile.in: Changed accordingly.
1638 * m68k-dis.c (ext_format_68881): Don't declare.
1639 (print_insn_m68k): If an instruction uses place 'i', it uses at
1640 least four fixed bytes.
1641 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1642 extended float, convert to double using floatformat_to_double, not
1643 ieee_extended_to_double, and fetch the data before converting it.
1645 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1647 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1648 davidj@ICSI.Berkeley.EDU (David Johnson).
1650 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1652 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1653 PowerPC uses bdnz[l][a].
1655 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1657 * dis-buf.c, i386-dis.c: Include sysdep.h.
1659 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1661 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1663 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1664 by Motorola PowerPC 601 with PPC_OPCODE_601.
1665 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1666 Disassemble Motorola PowerPC 601 instructions as well as normal
1667 PowerPC instructions.
1669 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1671 * i960-dis.c (reg, mem): Just use a static array instead of
1674 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1676 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1677 condition name index if this is for a negated condition.
1679 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1680 Floating point format for 'H' operand is backwards from normal
1681 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1682 operands (fmpyadd and fmpysub), handle bizarre register
1683 translation correctly for single precision format.
1685 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1686 or 'I' operands if the next format specifier is 'M' (fcmp
1687 condition completer).
1689 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1691 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1692 single number giving a bitmask for the MB and ME fields of an M
1693 form instruction. Change NB to accept 32, and turn it into 0;
1694 also turn 0 into 32 when disassembling. Seperated SH from NB.
1695 (insert_mbe, extract_mbe): New functions.
1696 (insert_nb, extract_nb): New functions.
1697 (SC_MASK): Mask out SA and LK bits.
1698 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1699 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1700 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1701 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1702 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1703 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1704 (powerpc_macros): Define table of macro definitions.
1705 (powerpc_num_macros): Define.
1707 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1708 if PPC_OPERAND_NEXT is set.
1710 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1712 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1713 char. Retrieve contents using bfd_getl32 instead of shifting.
1715 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1717 * ppc-opc.c: New file. Opcode table for PowerPC, including
1718 opcodes for POWER (RS/6000).
1719 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1720 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1721 (CFILES): Add ppc-dis.c.
1722 (ppc-dis.o, ppc-opc.o): New targets.
1723 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1725 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1727 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1728 No space before 'u', 'f', or 'N'.
1730 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1732 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1733 farther than we should.
1735 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1737 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1739 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1741 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1743 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1744 needs it, to prevent reading past the end of a section.
1746 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1748 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1749 Removed t,A case for la; always use t,A(b) case.
1751 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1753 From Ted Lemen <mellon@pepper.ncd.com>
1754 * mips-dis.c (print_insn_arg): Handle 'k'.
1755 * mips-opc.c: Make cache use k, not t.
1757 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1759 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1760 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1761 FLOAT_FORMAT_CODE to put out floating point register names.
1763 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1765 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1767 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1769 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1771 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1773 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1774 larger than 32. Moved dsxx32 variants first for disassembler.
1776 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1778 * z8kgen.c, z8k-opc.h: Add full lda information.
1780 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1782 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1783 movb instructions. Any necessary space will be emitted by
1784 the code to handle nullification completers.
1786 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1788 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1790 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1792 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1793 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1795 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1797 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1799 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1801 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1802 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1804 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1806 * m88k-dis.c (m88kdis): comment change. Remove space after
1808 (printop): handle new arg types DEC and XREG for m88110.
1810 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1812 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1813 type for absolute branch addresses. Delete special
1814 "ble" and "be" code in 'W' operand code.
1816 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1818 * mips-opc.c: Set hazard information correctly for branch
1819 likely instructions.
1821 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1823 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1824 info->fprintf_func for printing and info->print_address_func for
1827 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1829 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1831 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1833 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1834 Corrected second case of "b" for disassembler.
1836 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1838 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1839 to BFD swapping routines to correspond to BFD name changes.
1841 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1843 * mips-opc.c: Change div machine instruction to be z,s,t rather
1844 than s,t. Change div macro to be d,v,t rather than d,s,t.
1845 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1846 rem and remu which generates only the corresponding div
1847 instruction. This is for compatibility with the MIPS assembler,
1848 which only generates the simple machine instruction when an
1849 explicit destination of $0 is used.
1850 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1852 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1854 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1855 WR_31 hazard for bal, bgezal, bltzal.
1857 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1859 * hppa-dis.c (print_insn_hppa): Use print function
1860 from within the disassemble_info, not fprintf_filtered.
1862 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1864 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1865 Law, law@cs.utah.edu.)
1867 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1869 * mips-opc.c ("absu"): Removed.
1872 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1874 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1875 Changed hazard information to distinguish between memory load
1876 delays and coprocessor load delays.
1878 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1880 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1882 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1884 * configure.in: Don't pass cpu to config.bfd.
1886 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1888 * m88k-dis.c (m88kdis): Make class unsigned.
1890 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1892 * alpha-dis.c (print_insn_alpha): One branch format case was
1893 missing the instruction name.
1895 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1897 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1898 Add the arch-specific auxiliary files.
1899 (OFILES): Remove the arch-specific auxiliary files
1900 and use BFD_MACHINES instead of DIS_LIBS.
1901 * configure.in: Set BFD_MACHINES based on --with-targets option.
1903 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1905 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1908 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1910 * sparc-opc.c: Change CONST to const to deal with gcc
1911 -Dconst=__const -traditional.
1913 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1915 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1916 coprocessor instructions out of #if 0, and made them use new
1919 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1921 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1923 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1925 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1926 instruction, for use by the disassembler.
1928 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1929 hand-coded sign extensions that depended on 32-bit host ints.
1930 FIXME, we still depend on big-endian host bitfield ordering.
1931 (sparc_print_insn): Set the insn_info_valid field, and the
1932 other fields that describe the instruction being printed.
1934 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1936 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1937 `jmp' instead of just one of them.
1939 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1941 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1942 (fput_fp_reg_r): Renamed from fput_reg_r.
1943 (fput_fp_reg): New function.
1944 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1946 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1948 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1950 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1952 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1954 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1955 don't output a space.
1957 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1959 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1961 * mips-opc.c: New file, containing opcode table from
1962 ../include/opcode/mips.h.
1963 * Makefile.in: Add it.
1965 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1967 * m88k-dis.c: New file, moved in from gdb and changed to use the
1968 new dis-asm.h disassembler interface.
1969 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1970 (m88k-dis.o): New target.
1972 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1974 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1975 argument string const char * to correspond to opcode/mips.h.
1977 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1979 * mips-dis.c: Updated to account for name changes in new version
1981 * Makefile.in: Added header file dependencies.
1983 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1985 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1987 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1989 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1990 extend, rather than shifts.
1992 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1994 * Makefile.in: Undo 15 June change.
1996 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1998 * m68k-dis.c (print_insn_arg): Change return value to byte count
2000 * m68k-dis.c: Re-write to detect invalid operands before
2001 printing anything, so we can handle this the same way we
2002 handle invalid opcodes.
2004 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2006 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2008 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2010 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2013 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2015 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2017 * configure.in: Do make sysdep.h link.
2018 * Makefile.in: Search ../include. Don't search ../bfd.
2020 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2022 Changes from Jeff Law, law@cs.utah.edu:
2023 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2024 Do not print a space before the completers specified by
2027 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2029 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2030 defined, since gdb has been fixed.
2032 Changes from Jeff Law, law@cs.utah.edu:
2033 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2034 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2035 be a *disassemble_info, not a *FILE.
2036 * hppa-dis.c: Support 'd', '!', and 'a'.
2037 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2038 * hppa-dis.c: Delete cases which are no longer needed.
2040 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2042 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2044 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2046 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2049 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2051 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2052 * configure.in: No longer need to configure to get sysdep.h.
2054 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2056 * Patches from Jeffrey Law <law@cs.utah.edu>.
2057 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2058 templates for 1.1 FP computational instructions.
2060 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2062 * h8500-dis.c (print_insn_h8500): Address argument is type
2064 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2067 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2068 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2070 * sparc-dis.c (compare_opcodes): Move static declaration to
2073 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2075 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2076 instruction, remove unimp hack from 'l' argument.
2078 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2080 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2083 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2085 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2086 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2089 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2091 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2092 arrays of string pointers to 2-d arrays of chars, to save
2095 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2097 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2098 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2100 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2102 * hppa-dis.c: New file from Utah, adapted to new disassembler
2104 * Makefile.in: Include it.
2106 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2108 * sh-dis.c, sh-opc.h: New files.
2110 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2112 * alpha-dis.c, alpha-opc.h: New files.
2114 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2116 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2119 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2121 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2123 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2125 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2128 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2130 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2131 and double percent signs a few places.
2133 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2135 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2136 Use info->print_address_func not print_address.
2138 * dis-buf.c (generic_print_address): New function.
2140 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2142 * Makefile.in: Add sparc-dis.c.
2143 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2145 Add `add' instruction to the set that get checked
2146 for a preceding `sethi' in order to print an absolute address.
2147 * (print_insn): Disassembly prefers real instructions.
2148 (is_delayed_branch): Speed up.
2149 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2150 Still missing some float ops, and needs testing.
2151 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2152 F_ALIAS. Use printf, not fprintf, when not passing a file
2154 (compare_opcodes): Check that identical instructions have
2155 identical opcodes, complain otherwise.
2158 * Include reg_names.
2160 Use dis-asm.h/read_memory_func interface.
2162 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2164 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2165 deliberately return non-zero to setjmp from longjmp. Otherwise
2166 this code fails to compile.
2168 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2170 * m68k-dis.c: Fix prototype for fetch_arg().
2172 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2174 * dis-buf.c: New file, for new read_memory_func interface.
2175 Makefile.in (OFILES): Include it.
2176 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2177 Use new read_memory_func interface.
2179 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2181 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2182 * h8500-opc.h: Fix couple of opcodes.
2184 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2186 * Makefile.in: add dvi & installcheck targets
2188 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2190 * Makefile.in: Update for h8500-dis.c.
2192 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2194 * h8500-dis.c, h8500-opc.h: New files
2196 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2198 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2199 ../include/dis-asm.h.
2200 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2201 and ../gdb/m68k-pinsn.c).
2202 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2203 and ../gdb/i386-pinsn.c).
2204 * m68881-ext.c: New file. Moved definition of
2205 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2206 * Makefile.in: Adjust for new files.
2207 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2208 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2209 can be dis-assembled.
2211 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2213 * mips-dis.c (print_insn_arg): Now returns void.
2215 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2217 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2218 files that use the macros.
2220 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2222 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2223 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2224 (CFILES): Added mips-dis.c.
2226 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2228 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2229 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2231 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2233 * Makefile.in: Improve *clean rules.
2234 * configure.in: Allow a default host.
2236 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2238 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2239 files include other sysdep files
2241 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2243 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2245 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2247 * configure.in: For host support, use ../bfd/configure.host
2248 so it stays in sync with the ../bfd/hosts database.
2250 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2252 * configure.in: use cpu-vendor-os triple instead of nested cases
2254 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2256 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2257 *always* the wrong one.
2259 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2261 * z8kgen.c: added copyright info
2263 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2265 * z8k-dis.c (unparse_instr): prettier tabs
2266 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2268 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2270 * configure.in: Add ncr* configuration.
2271 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2272 picayune ANSI compilers happy.
2274 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2276 * configure.in (i386): Make i386 and i486 synonymous for now.
2277 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2279 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2281 * Makefile.in (install): Fix typo.
2283 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2285 * Makefile.in (make): Remove obsolete crud.
2286 (sparc-opc.o): Avoid Sun Make VPATH bug.
2288 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2290 * Makefile.in: since there are no SUBDIRS, remove rule and
2291 references of subdir_do.
2293 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2295 * Makefile.in (install): Get the library name right here too.
2296 Don't install bfd.h, since it's unrelated to this library. No
2297 subdirs to recurse into, either.
2298 (CFILES): The source file has a .c suffix, not .o.
2300 * sparc-opc.c: New file, moved from BFD.
2301 * Makefile.in (OFILES): Build it.
2303 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2305 * z8k-dis.c: fixed forward refferences of some declarations.
2307 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2309 * Makefile.in: get the name of the library right
2311 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2313 * z8k-dis.c: knows how to disassemble z8k stuff
2314 * z8k-opc.h: new file full of z8000 opcodes
2318 version-control: never
projects / deliverable / binutils-gdb.git / blob