1 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
3 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
4 instructions. Support (sp) addressing mode by expanding it into
8 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
10 * m10300-opc.c: Support 4 byte DSP instructions.
13 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
15 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
18 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
20 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
23 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
25 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
28 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
30 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
34 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
36 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
39 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
41 * mips-dis.c (print_insn_little_mips): Previously, instruction
42 printing references the symbol table to determine whether the
43 instruction resides in a block regular instructions or mips16
44 instructions. However, when the disassembler gets used in other
45 environments where the symbol table is not present, we no longer
46 rely in the symbol table, rather, use the low bit of the
47 instructions address to guess. There should be no change for usage
48 of the disassembler in host based programse, gdb ,objdump.
49 (print_insn_big_mips): ditto.
50 (print_insn_mips): ditto
52 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
54 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
56 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
59 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
60 operands for the am33.
61 (mn10300_opcodes): Add new instructions from the am33.
63 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
65 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
67 * i386-dis.c (index16): Add '%' to register names. Use ','
70 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
72 * i386-dis.c: Don't print opcode suffix when we can figure out the
73 size (and gas can!) by register operands, or from the default
75 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
77 (dis386, dis386_twobyte, grps): Use new suffix macros.
78 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
79 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
80 order of cmps operands to agree with Intel docs. Correct operand
81 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
82 agree with Intel docs.
83 (print_insn_x86): Print orphan fwait before other prefixes.
84 Return correct byte count for orphan fwait with prefixes. Don't
85 print `bound' operands in reverse order.
86 (ckprefix): Stop accumulating prefixes if we get fwait.
87 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
89 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
91 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
92 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
94 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
96 Fix problems when bfd_vma is wider than long.
97 * i386-dis.c: Make op_address and start_pc unsigned.
98 (set_op): Make parameter unsigned.
99 (print_insn_x86): Cast to bfd_vma when passing a value to
101 * ns32k-dis.c (CORE_ADDR): Don't define.
102 (print_insn_ns32k): Change type of addr to bfd_vma. Use
103 bfd_scan_vma to read back address.
104 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
106 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
107 (NEXTULONG): New definition.
108 (print_insn_m68k): Avoid overflow when computing third argument of
110 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
111 Use disp instead of val to store offset values.
112 (print_indexed): Use base_disp instead of word to store base
113 displacement, to avoid overflow.
114 * m10300-dis.c (disassemble): Cast value to long when computing
115 pc-relative address, to get correct sign extension.
117 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
119 * m32r-opc.c: Regenerate.
121 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
123 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
124 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
126 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
128 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
130 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
132 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
134 (OP_DSreg): Rename from OP_DSSI.
135 (OP_ESreg): Rename from OP_ESDI.
136 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
138 (append_seg): Rename from append_prefix.
139 (ptr_reg): New function.
140 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
142 (PREFIX_ADDR): Rename from PREFIX_ADR.
143 (float_reg): Add non-broken opcodes for people who don't want
146 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
148 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
151 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
153 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
155 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
157 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
158 0; produce error message for shifts of size 32 (or 64 for 64-bit
159 shifts), because the hardware doesn't support them.
162 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
164 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
167 * vu0.h (sqc2): Fix opcode.
169 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
173 start-sanitize-vr5400
174 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
176 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
177 Change pinfo to use WR_HILO.
181 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
183 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
184 LONG_2, LONG_2b formats to use this new operand.
187 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
189 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
191 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
193 * sparc-dis.c (print_insn_sparc): big endian instruction / little
197 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
199 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
200 and SHORT_B3b formats to use Rb instead of Ra.
202 Add FLAG_MUL16 to MUL2XH opcode.
204 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
205 to existing 1.1.1 parallelisation prohibition procedure.
208 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
210 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
211 * cgen-dis.in (extract_normal): Likewise.
212 * m32r-asm.c,m32r-dis.c: Regenerate.
215 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
217 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
221 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
223 * mips-opc.c (multu1): Add two operand variant for the r5900.
226 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
228 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
229 with a shift count of 0.
232 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
234 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
236 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
238 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
239 (_print_insn_mips): Likewise.
240 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
244 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
246 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
247 (cgen_hw_lookup_by_num): New function.
250 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
253 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
255 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
257 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
259 * sparc-dis.c (print_insn_sparc): Always fetch instructions
260 as big-endian on SPARClite.
263 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
265 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
267 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
272 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
274 * d30v-opc.c (pre_defined_register): Remove alias for r0.
278 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
280 * mips-opc.c (break): Added 20-bit single-operand break
281 instruction for R5900 only.
284 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
286 * po/Make-in (install-info): New target.
288 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
290 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
291 * configure: Rebuild.
293 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
295 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
296 variety of ISA2 instructions to set bottom ten bits of trap code.
298 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
300 * Makefile.am (config.status): Add explicit target so that
301 config.status depends upon bfd/configure.in.
302 * Makefile.in: Rebuild.
304 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
306 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
307 instructions to set bottom ten bits of break code.
308 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
309 for above optional argument.
311 start-sanitize-cygnus
312 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
314 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
315 * m32r-opc.h: Regenerate.
318 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
320 * makefile.vms: Run dec c with /nodebug.
322 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
324 * Makefile.in: Rebuilt.
325 * Makefile.am: Regenerated dependencies with mkdep.
327 * opintl.h (_): Define as dgettext.
329 start-sanitize-cygnus
330 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
332 * configure.in: Add support for --enable-cgen-maint.
333 * Makefile.am (M32R_DEPS): New variable.
334 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
335 * aclocal.m4: Regenerate.
336 * Makefile.in: Regenerate.
337 * configure: Regenerate.
339 * Makefile.am (CGENFILES): Add minsn.scm.
342 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
344 * cgen-asm.c: Internationalised.
345 start-sanitize-cygnus
346 * cgen-asm.in: Internationalised.
347 * cgen-opc.in: Internationalised.
349 * m32r-asm.c: Internationalised.
350 * m32r-dis.c: Internationalised.
351 * m32r-opc.c: Internationalised.
353 * aclocal.m4: Regenerated.
354 * configure: Regenerated.
355 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
356 * Makefile.in: Rebuild.
357 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
358 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
360 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
362 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
364 * aclocal.m4, configure: Rebuild with current tools.
366 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
368 * opintl.h: New file - contains internationalisation macros used
369 by source files in this directory.
370 * po/: New subdirectory - contains internationalisation files.
371 * po/Make-in: New file - Makefile constructor.
372 * po/POTFILES.in: New file - list of files in opcodes directory
373 that should be scan for internationalisation macros.
374 * po/opcodes.pot: New file - list of internationisation strings
375 found in files mentioned in po/POTFILES.in.
376 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
377 entry. Add intl directory to include paths.
378 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
379 HAVE_STRCPY, HAVE_LC_MESSAGES
380 * configure.in: Add rule to build Makefile in po subdirectory.
381 * Makefile.in: Rebuilt.
382 * aclocal.m4: Rebuilt.
383 * config.in: Rebuilt.
384 * configure: Rebuilt.
385 * alpha-opc.c: Internationalised.
386 * arc-dis.c: Internationalised.
387 * arc-opc.c: Internationalised.
388 * arm-dis.c: Internationalised.
389 * cgen-asm.c: Internationalised.
391 * d30v-dis.c: Internationalised.
393 * dis-buf.c: Internationalised.
395 * dvp-dis.c: Internationalised.
396 * dvp-opc.c: Internationalised.
398 * h8300-dis.c: Internationalised.
399 * h8500-dis.c: Internationalised.
400 * i386-dis.c: Internationalised.
401 * m10200-dis.c: Internationalised.
402 * m10300-dis.c: Internationalised.
403 * m68k-dis.c: Internationalised.
404 * m88k-dis.c: Internationalised.
405 * mips-dis.c: Internationalised.
406 * ns32k-dis.c: Internationalised.
407 * opintl.h: Internationalised.
408 * ppc-opc.c: Internationalised.
409 * sparc-dis.c: Internationalised.
410 * v850-dis.c: Internationalised.
411 * v850-opc.c: Internationalised.
413 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
415 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
416 (asm_hash_table_entries): New variable.
417 (cgen_asm_init): Free asm_hash_table_entries.
418 (hash_insn_array,hash_insn_list): New functions.
419 (build_asm_hash_table): Use them. Hash macro insns as well.
420 (cgen_asm_lookup_insn): Update.
421 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
422 (dis_hash_table_entries): New variable.
423 (cgen_dis_init): Free dis_hash_table_entries.
424 (hash_insn_array,hash_insn_list): New functions.
425 (build_dis_hash_table): Use them. Hash macro insns as well.
426 (cgen_dis_lookup_insn): Update.
427 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
428 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
429 (cgen_macro_insn_count): New function.
430 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
431 All callers updated. Sanity check result of extract fn.
432 (@arch@_cgen_get_insn_operands): Change result type to void.
433 Delete args insn_value, length. New arg fields. All callers updated.
434 (@arch@_cgen_lookup_get_insn_operands): New function.
435 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
437 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
439 * i386-dis.c (OP_DSSI): Print segment override.
442 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
444 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
448 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
450 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
454 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
456 * vu0.h (vlqd, vlqi): Update per revised specs.
460 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
462 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
463 (vif_operands): Update.
464 (vif_get_unpackloc): Delete.
465 (state_vif_unpackloc{,_star_p}): Delete.
466 (dvp_opcode_init_parse): Update.
467 (vif_unpack_len_value): Avoid divide by zero.
471 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
473 * vu0.h: Specs changed for VCALLMSR bit pattern.
474 * mips-dis.c: (print_insn_arg) Matching change.
477 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
479 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
482 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
484 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
485 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
486 * configure.in: Define and substitute WIN32LDFLAGS and
488 * aclocal.m4: Rebuild with new libtool.
489 * configure, Makefile.in: Rebuild.
492 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
494 * vu0.h: Corrected bit pattern for VMAXI opcode.
497 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
499 * m32r-opc.c: Regenerate.
502 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
504 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
505 (dvp_expand_macro): Implement.
506 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
507 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
510 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
512 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
513 before trying to copy it.
514 * Makefile.in: Rebuild.
516 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
518 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
521 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
523 * m32r-opc.c: Fix bit patterns for SAT and SATB.
526 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
528 * ns32k-dis.c (bit_extract_simple): New function to extract bits
529 from an arbitrary valid buffer instead of fetching them on demand
531 (invalid_float): use bit_extract_simple() instead of bit_extract().
534 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
536 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
537 * m32r-opc.h: Add extra control registers.
540 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
542 From H.J. Lu <hjl@gnu.org>:
543 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
546 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
548 * Branched binutils 2.9.
551 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
553 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
554 disassembling last 4 bytes of a section.
557 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
559 Fix some gcc -Wall warnings:
560 * arc-dis.c (print_insn): Add casts to avoid warnings.
561 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
562 * d10v-dis.c (dis_long, dis_2_short): Likewise.
564 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
565 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
566 (parse_bc, parse_vfreg, parse_accdest): Likewise.
567 (parse_ffstreg, parse_vif_mode): Likewise.
569 * m10200-dis.c (disassemble): Likewise.
570 * m10300-dis.c (disassemble): Likewise.
571 * ns32k-dis.c (print_insn_ns32k): Likewise.
572 * ppc-opc.c (insert_ral, insert_ram): Likewise.
573 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
574 * cgen-opc.c (cgen_keyword_search_next): Likewise.
575 * d10v-dis.c (dis_long, dis_2_short): Likewise.
577 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
580 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
581 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
582 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
584 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
586 * tic80-dis.c (print_one_instruction): Likewise.
588 * w65-dis.c (print_operand): Likewise.
589 * z8k-dis.c (fetch_data): Likewise.
590 * a29k-dis.c: Add return type for find_byte_func_type.
591 * arc-opc.c: Include <stdio.h>. Remove declarations of
592 insert_multshift and extract_multshift.
594 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
596 (extract_value): Fully parenthesize expression.
599 * dvp-opc.c: Include <ctype.h>.
600 (print_sdest): Add default case to switch.
602 * h8500-dis.c (print_insn_h8500): Initialize local variables.
603 * h8500-opc.h (h8500_table): Fully bracket initializer.
604 * w65-opc.h (optable): Likewise.
605 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
606 * i386-dis.c (OP_E): Initialize local variables.
607 * m10200-dis.c (print_insn_mn10200): Likewise.
608 * mips-dis.c (print_insn_mips16): Likewise.
609 * sh-dis.c (print_insn_shx): Likewise.
610 * v850-dis.c (print_insn_v850): Likewise.
611 * ns32k-dis.c (print_insn_arg): Declare.
612 (get_displacement, invalid_float): Declare.
613 (list_search, sign_extend, flip_bytes): Declare return type.
614 (get_displacement): Likewise.
615 (print_insn_arg): Likewise. Make d int. Fix sprintf format
617 (print_insn_ns32k): Make i unsigned.
618 (invalid_float): Make static. Declare type of val.
619 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
620 on each for iteration.
621 * tic30-dis.c (get_indirect_operand): Likewise.
622 * z8k-dis.c (print_insn_z8001): Declare return type.
623 (print_insn_z8002): Likewise.
624 (unparse_instr): Fix sprintf format strings.
626 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
628 * mips-opc.c: Add "sync.l" and "sync.p".
631 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
633 * dvp-opc.c (extract_vif_datalen): Rewrite.
634 (vif_insn_len): Perform 0->max+1 conversion for direct length.
636 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
638 * dvp-dis.c (print_insn): Print unpack address in hex.
639 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
640 Don't skip over '*', just record it.
641 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
642 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
643 Don't skip over '*', just record it.
644 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
645 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
646 (vif_opcodes): Likewise.
647 (state_vif_{mpg,unpack}loc_star_p): New static locals.
648 (vif_macros,vif_macro_count): New globals.
649 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
650 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
651 (vif_get_wl_cl): New function.
652 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
655 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
657 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
658 default m68k variant to recognize.
660 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
661 (ctrl, cobr, mem, ea): Likewise.
662 (print_addr): Likewise. Remove cast.
663 (ea): Cast argument of print_addr to bfd_vma.
665 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
667 (cgen_parse_unsigned_integer): Likewise.
668 (cgen_parse_address): Likewise.
670 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
672 * i960-dis.c (ctrl): Add full braces to structure initialization.
673 (cobr, mem, reg): Likewise.
674 (ea): Correct parenthesization in expression.
676 * cgen-asm.c: Include <ctype.h>.
677 (build_asm_hash_table): Remove unused local variable i.
678 (cgen_parse_keyword): Add casts to avoid warnings.
680 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
681 symbol. Fix indentation.
682 (print_insn_little_arm): Likewise.
685 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
687 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
692 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
694 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
699 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
701 * dvp-opc.c (vif_operand_datalen_special): New global.
705 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
707 * vu0.h (vcallms): Use 'O' for call target operand.
708 * mips-dis.c (print_insn_arg): Handle 'O'.
711 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
713 * configure.in: Use AM_DISABLE_SHARED.
714 * aclocal.m4, configure: Rebuild with libtool 1.2.
717 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
719 * mips-dis.c: Change '%' to '#' in r5900 support.
723 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
725 These patches are courtesy of Jonathan Walton and Tony Thompson
726 (athompso@cambridge.arm.com).
728 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
731 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
732 both the offset and the label closest to the destination.
735 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
737 * vu0.h: New file with cop2/vu0 instructions.
738 * mips-opc.c: Include vu0.h.
739 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
741 (print_insn_mips): Do not emit a tab after an instruction if the
742 first arg is an instruction completer (&). If the next arg is an
743 escape character (%), then print the next arg verbatim.
744 * Makefile.am (mips-opc.lo): Depend on vu0.h
748 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
750 * dvp-opc.c (vif_opcodes): Add stcycl.
752 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
754 * dvp-dis.c (print_dma): Change length from 16 to 8.
757 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
759 * m32r-opc.h: Regenerate.
762 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
764 * dvp-opc.c (print_dest1): Print dest spec again.
765 (print_vfreg,print_accdest): Likewise.
766 (vif_unpack_len): Round result up to word boundary.
769 start-sanitize-vr4320
770 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
772 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
774 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
776 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
781 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
783 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
784 (print_insn): Do mask comparison on proper opcode word.
785 Print unsigned values in hex.
786 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
787 (parse_bc): Catch missing dest.
788 (parse_vfreg): Replace atoi call with strtol.
789 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
790 (parse_bcftreg,parse_ffstreg): Handle missing dest.
791 (extract_gif_eop): New function.
792 (gif_operands): Update eop entry.
793 (VGIFOP,VGIFNREGS): Fix calcs.
794 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
795 (gif_regs): Add entry for unused 11 case.
796 (print_gif_regs): Print empty list instead of nothing.
797 (extract_gif_nloop): Fix value calc.
798 (print_gif_nloop): Always print value, even if 0.
799 (insert_vif_wlcl,extract_vif_wlcl): New functions.
800 (vif_operands): Use them for wl,cl fields.
801 (state_vif_wl,state_vif_cl): New static locals.
802 (parse_vif_mode): Handle numeric args.
803 (vif_unpack_len_value,vif_unpack_len): New functions.
804 (vif_insn_len): Call vif_unpack_len.
807 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
809 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
811 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
813 * cgen-asm.in: Move insertion of generated routines to top of file.
814 (insert_normal): Add prototype. Delete `shift' arg.
815 * cgen-dis.in: Move insertion of generated routines to top of file.
816 (extract_normal): Add prototype. Delete `shift' arg.
817 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
818 (print_keyword): Add prototype. Fix type of `attrs' arg.
820 start-sanitize-vr4320
821 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
823 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
824 * mips-opc.c ("mac","dmac") : Added 4320 insns.
827 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
829 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
830 assume that info->symbols is non-empty.
832 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
834 * alpha-opc.c (cvtqs) There is no such thing.
835 (cvttq): Missing most of the /*d variants.
838 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
840 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
842 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
843 (r5900/msub.s): Takes three operands, not four. Fix opcode.
847 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
849 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
850 delayed branches or jumps.
854 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
856 * dvp-opc.c (vif_operands): Add unpack[u] support.
857 (vif_opcodes): Ditto.
858 (*_vif_imrubits): Renamed from *_vif_imrbits.
860 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
862 * dvp-dis.c (print_insn): Handle word number.
863 Handle mips address vs vu address.
864 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
865 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
866 ({insert,extract}_dma_addr): Fix word ofset.
867 ({insert,print}_gif_regs): Fix encode/decode.
870 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
872 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
874 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
875 * tic30-dis.c (print_branch): Likewise.
877 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
878 * dvp-dis.c (dvp_info_mach_type): New function.
879 (print_insn_dvp): Call it.
880 (print_vif): Return length of 4 if mpg or direct insn so following
881 insns get properly disabled.
882 (print_gif): Fix word order.
883 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
884 (gif_operands): Fix word order.
885 (gif_opcodes): Likewise.
886 ({insert,extract,print}_gif_regs): Likewise.
887 (gif_regs): Add new register number/name changes.
888 (dma_opcodes): Add dmarefe insn.
891 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
893 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
894 saved_symbol code as it is no longer needed.
896 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
898 * cgen-asm.c: Include symcat.h.
899 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
901 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
904 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
906 * dvp-opc.c (extra_dma_flags): Fix typos.
907 (dma_operands): Fix word numbers.
908 (dma_opcodes): Likewise.
909 ({insert,extract}_dma_flags): Likewise.
912 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
914 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
917 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
919 * dvp-dis.c (print_gif): Complete.
920 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
921 (state_gif_{nregs,regs,nloop}): New static locals.
923 (dvp_opcode_init_{parse,print}): Init gif state locals.
924 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
925 (vif_insn_len): Handle `unpack'.
926 ({insert,extract}_dma_flags): Complete.
930 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
932 * mips-opc.c (mula.s): Renamed from multa.s.
935 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
937 * m32r-opc.[ch]: Regenerate.
940 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
942 * dvp-opc.c (dma_operands): Rewrite.
943 (dma_operand_{count,addr}): New globals.
944 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
945 (insert_dma_addr): Insert value into insn.
946 (extract_dma_addr): Extract value from insn.
948 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
950 * dvp-dis.c (print_vu): Handle loi insns.
951 (print_insn): Likewise.
952 * dvp-opc.c (vu_lower_opcodes): Add "loi".
953 (vu_operands): Make LDEST1 a FAKE operand.
954 (parse_dest1): Allow elided argument.
955 (print_dest1): Don't print the argument.
957 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
959 * dvp-opc.c (parse_vfreg): Dest spec is optional.
960 (print_vfreg): Don't print dest spec.
961 (parse_accdest): Dest spec is optional.
962 (print_accdest): Don't print dest spec.
965 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
967 * Makefile.am (CGENFILES): Update.
968 * Makefile.in: Regenerate.
969 * cgen-asm.in (insert_normal): Result is error message now.
970 Validate value to be inserted.
971 (insert_insn_normal): Result is error message now.
972 (@arch@_cgen_assemble_insn): Update.
973 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
974 arguments. Don't perform validation here.
975 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
977 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
979 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
980 operand instance list.
981 * m32r-opc.c: Regenerate.
983 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
985 * Makefile.am (AUTOMAKE_OPTIONS): Define.
986 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
988 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
990 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
992 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
994 * configure.in: Get the version number from BFD.
995 * configure: Rebuild.
997 From H.J. Lu <hjl@gnu.org>:
998 * Makefile.am (libopcodes_la_LDFLAGS): Define.
999 * Makefile.in: Rebuild.
1001 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1003 * m32r-opc.c: Regenerate.
1004 * m32r-opc.h: Regenerate.
1006 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1008 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1009 Ignore ALIAS insns if asked to.
1010 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1011 * m32r-opc.c: Regenerate.
1014 * dvp.opc.c: Nicely format opcode tables.
1015 (vu_operands): New element UFLAGS.
1016 (parse_uflags,print_uflags): New functions.
1017 (vu_upper_opcodes): Add UFLAGS to all insns.
1020 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1022 Fix rac to accept only a0:
1023 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1024 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1025 Introduce OPERAND_GPR.
1026 * d10v-dis.c (print_operand): Likewise.
1028 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1030 * cgen-opc.in: New file.
1031 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1032 * Makefile.am (CGENFILES): Add cgen-opc.in.
1033 * Makefile.in: Regenerate.
1035 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1036 (cgen_hw_lookup): Make result const.
1038 * cgen-dis.in (*): Use PTR instead of void *.
1039 (print_insn): Delete unused vars `i', `syntax'.
1041 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1044 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1046 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1047 (vif_opcodes): Update renamed insns.
1048 * dvp-dis.c (*): Likewise.
1051 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1053 * configure, aclocal.m4: Rebuild with new libtool.
1056 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1058 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1059 instructions use a PC relative branch, not absolute.
1062 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1064 * configure.in: Set libtool_enable_shared rather than
1065 libtool_shared. Remove diversion hack.
1066 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1068 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1070 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1071 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1073 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1075 * tic30-dis.c: New file.
1076 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1077 * configure.in: Handle bfd_tic30_arch.
1078 * Makefile.am: Rebuild dependencies.
1079 (CFILES): Add tic30-dis.c
1080 (ALL_MACHINES): Add tic30-dis.lo.
1081 * configure, Makefile.in: Rebuild.
1083 start-sanitize-m32rx
1084 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1086 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1087 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1088 macwhi-a and macwlo-a instructions.
1092 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1094 * dvp-opc.c, fixed encoding of a bunch of instructions to
1095 be consistent with the asmvu assembler (and inconsistent
1096 with the specification).
1098 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1100 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1101 in the opcode table. The pkemscalf instruction must come first.
1103 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1105 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1108 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1110 * m32r-opc.h (HAVE_CPU_M32R): Define.
1113 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1115 * dvp-dis.c, dvp-opc.c: New files.
1116 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1117 * configure: Regenerate.
1118 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1119 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1120 (mips-dis.lo): Compile with @archdefs@.
1121 * Makefile.in: Regenerate.
1122 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1123 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1126 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1128 * v850-opc.c (insertion routines): If both alignment and size is
1129 wrong then report this.
1131 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1133 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1134 Only recognize instructions for the current target_processor.
1136 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1138 * d10v-dis.c (PC_MASK): Correct value.
1139 (print_operand): If there's a reloc, don't calculate the
1140 address because they could be in different sections.
1142 start-sanitize-cygnus
1143 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1145 * cgen.sh: Rewrite to be like simulator's version.
1146 * Makefile.am (cgen): Update call to cgen.sh.
1147 * Makefile.in: Regenerate
1150 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1152 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1153 instruction after the 4650's "mul" instruction; nobody's using the
1154 4010 these days. If object files someday indicate which processor
1155 variant they're intended for, we can do a better job at this.
1157 start-sanitize-r5900
1158 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1160 * mips-opc.c (c.lt.s): Add r5900 variant.
1164 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1166 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1167 table provided entry size. Use CGEN_INSN_MNEMONIC.
1168 (cgen_parse_keyword): Rewrite.
1169 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1170 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1171 * cgen-opc.c: Clean up pass over `struct foo' usage.
1172 (cgen_keyword_lookup_value): Handle "" entry.
1173 (cgen_keyword_add): Likewise.
1174 start-sanitize-cygnus
1175 * Makefile.am: Add cgen support.
1176 * Makefile.in: Regenerate.
1177 * configure.in: Add cgen support.
1178 * configure: Regenerate.
1179 * aclocal.m4: Regenerate.
1180 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1183 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1185 * mips-opc.c: Add FP_D to s.d instruction flags.
1187 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1189 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1191 start-sanitize-tic80
1192 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1194 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1195 PC relative offset forms before the 15 bit forms. An assembler command
1196 line option now chooses the default.
1199 start-sanitize-r5900
1200 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1202 * mips-opc.c: Add many missing r5900 instructions.
1206 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1208 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1209 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1212 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1214 * configure: Only build libopcodes shared if --enable-shared's value
1215 was `yes', or was set to `*opcodes*'.
1216 * aclocal.m4: Likewise.
1217 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1218 original source of this bit of code. It's not clear what the best fix
1221 start-sanitize-r5900
1222 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1224 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1226 start-sanitize-tic80
1227 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1229 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1230 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1231 offset forms before the 15 bit forms, to default to the long forms.
1234 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1236 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1238 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1240 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1241 symbol if none is present.
1242 (print_insn_big_arm): Prevent examination of stored symbol if
1245 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1247 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1249 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1251 * disassemble.c: Remove disasm_symaddr() function.
1253 * arm-dis.c: Use info->symbol instead of info->flags to determine
1254 if disassmbly should be in Thumb or Arm mode.
1256 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1258 * arm-dis.c: Add support for disassembling Thumb opcodes.
1259 (print_insn_thumb): New function.
1261 * disassemble.c (disasm_symaddr): New function.
1263 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1264 (thumb_opcodes): Table of Thumb opcodes.
1266 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1268 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1270 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1271 and 'v' as operand types.
1273 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1275 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1276 <olivier.carmona@di.epfl.ch>.
1277 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1278 which has a two word opcode with a one word argument.
1281 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1283 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1284 unsigned, not signed.
1285 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1288 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1290 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1291 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1292 (ftrv): Slay the cut-and-paste monster.
1294 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1296 * d10v-dis.c (print_operand):
1297 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1299 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1301 * d10v-opc.c (OPERAND_FLAG): Split into:
1302 (OPERAND_FFLAG, OPERAND_CFLAG) .
1306 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1308 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1309 field for all INSN_MACRO's.
1310 * mips16-opc.c: same
1312 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1314 * mips-opc.c (sync,cache): These are 3900 insns.
1316 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1318 sh-opc.h (sh_table): Remove ftst/nan.
1320 start-sanitize-vr5400
1321 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1323 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1324 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1326 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1330 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1332 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1333 Add tx49 insns and configury.
1336 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1338 * mips-opc.c (ffc, ffs): Fix mask.
1341 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1343 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1347 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1349 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1350 start-sanitize-vr5400
1351 Added VR5400 instructions.
1352 (N5): New cpu-id macro.
1354 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1356 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1358 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1359 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1361 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1363 * v850-dis.c (disassemble): Replace // with /* ... */
1365 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1367 * sparc-opc.c: Add wr & rd for v9a asr's.
1368 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1369 (v9a_asr_reg_names): New variable.
1370 Patch from David Miller <davem@vger.rutgers.edu>.
1372 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1374 * sparc-opc.c (v9notv9a): New insn type.
1375 (IMPDEP): Move to the end to not conflict with edge8 et al.
1376 Patch from David Miller <davem@vger.rutgers.edu>.
1378 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1380 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1382 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1384 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1386 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1388 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1389 of disassemble_info structure to determine if an overlay address
1390 has a matching symbol in low memory.
1392 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1393 new symbol_at_address_func field in disassemble_info structure.
1395 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1397 * v850-opc.c (extract_d22): Use signed arithmatic.
1399 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1401 * mips-opc.c: Three op mult is not an ISA insn.
1403 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1405 * mips-opc.c: Fix formatting.
1407 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1409 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1410 than assuming that char is signed. Explicitly sign extend 16 bit
1411 values, rather than assuming that short is 16 bits.
1412 (OP_sI, OP_J, OP_DIR): Likewise.
1414 start-sanitize-v850e
1415 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1417 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1421 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1423 * v850-opc.c: Fix typo in comment.
1425 * v850-dis.c (disassemble): Add test of processor type when
1426 determining opcodes.
1428 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1430 * configure.in: Use a diversion to set enable_shared before the
1431 arguments are parsed.
1432 * configure: Rebuild.
1434 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1436 * m68k-opc.c (TBL1): Use ! rather than `.
1437 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1439 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1441 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1443 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1445 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1448 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1449 * aclocal.m4: Rebuild with new libtool.
1450 * configure: Rebuild.
1452 start-sanitize-v850e
1453 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1455 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1458 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1460 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1462 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1464 * v850-opc.c (v850_opcodes): Further rearrangements.
1467 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1469 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1472 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1474 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1477 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1479 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1481 * mips16-opc.c: Added mips16 sdbbp.
1484 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1486 * v850-opc.c: Initialise processors field of v850_opcode structure.
1489 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1491 Merge changes from Martin Hunt:
1493 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1495 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1496 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1497 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1499 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1501 * d30v-dis.c (print_insn): First operand of d*i (delayed
1502 branch) instructions is relative.
1504 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1505 (d30v_operand_table): Add IMM6S3 type.
1506 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1508 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1509 and cmp instructions.
1511 * d30v-opc.c: Correct entries for repeat*, and sat*.
1512 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1513 types. Correct several formats.
1515 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1517 * d30v-opc.c (pre_defined_registers): Change control registers.
1519 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1520 SHORT_C2. Manual was incorrect.
1522 * d30v-dis.c (lookup_opcode): Return value now indicates
1523 if an opcode has a short and a long form. Used for deciding
1524 to append a ".s" or ".l".
1525 (print_insn): Append a ".s" to an instruction if it is
1526 the short form and ".l" if it is a long form. Do not append
1527 anything if the instruction has only one possible size.
1529 * d30v-opc.c: Change mulx2h to require an even register.
1530 New form: SHORT_A2; a SHORT_A form that needs an even
1531 register as the first operand.
1533 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1534 instruction was not being disassembled if there were an odd
1535 number of instructions.
1537 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1540 start-sanitize-v850e
1541 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1543 * v850-dis.c (disassemble): Improved display of register lists.
1546 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1548 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1549 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1550 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1551 fandnot1s, fandnot2s.
1553 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1555 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1557 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1559 * cgen-asm.c (cgen_parse_address): New argument resultp.
1560 All callers updated.
1561 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1563 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1565 * mn10200-dis.c (disassemble): PC relative instructions are
1566 relative to the next instruction, not the current instruction.
1568 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1570 * v850-dis.c (disassemble): Only signed extend values that are not
1571 returned by extract functions.
1572 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1574 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1576 * v850-opc.c: Update comments. Remove use of
1577 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1579 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1581 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1583 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1585 * configure: Rebuilt with latest devo autoconf for NT support.
1587 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1589 * v850-dis.c (disassemble): Use curly brace syntax for register
1592 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1593 where r0 is being used as a destination register.
1595 start-sanitize-v850e
1596 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1598 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1601 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1603 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1604 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1605 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1606 Add insns to access SGR and DBR.
1607 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1609 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1611 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1613 start-sanitize-v850e
1614 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1616 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1617 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1620 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1622 * configure (cgen_files): Add support for v850e target.
1623 * configure.in (cgen_files): Add support for v850e target.
1625 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1627 * configure (cgen_files): Add support for v850ea target.
1628 * configure.in (cgen_files): Add support for v850ea target.
1631 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1633 * configure.in (bfd_arc_arch): Add.
1634 * configure: Rebuild.
1635 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1636 * Makefile.in: Rebuild.
1637 * arc-dis.c, arc-opc.c: New files.
1638 * disassemble.c (ARCH_all): Define ARCH_arc.
1639 (disassembler): Add ARC support.
1641 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1643 start-sanitize-v850e
1644 * v850-dis.c (disassemble): Add support for v850EA instructions.
1646 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1647 (v850_opcodes): Add v850EA instructions.
1649 * v850-dis.c (disassemble): Add support for v850E instructions.
1651 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1652 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1653 insert_spe, extract_spe): New Functions.
1654 (v850_opcodes): Add v850E instructions.
1657 * v850-opc.c: Reorganised and re-layed out to improve readability
1660 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1662 * configure: Rebuild with autoconf 2.12.1.
1664 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1666 * aclocal.m4, configure: Rebuild with new automake patches.
1668 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1670 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1671 * acinclude.m4: Just include acinclude.m4 from BFD.
1672 * aclocal.m4, configure: Rebuild.
1674 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1676 * Makefile.am: New file, based on old Makefile.in.
1677 * acconfig.h: New file.
1678 * acinclude.m4: New file.
1679 * stamp-h.in: New file.
1680 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1681 Removed shared library handling; now handled by libtool. Replace
1682 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1683 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1684 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1685 handling in AC_OUTPUT.
1686 * dep-in.sed: Change .o to .lo.
1687 * Makefile.in: Now built with automake.
1688 * aclocal.m4: Now built with aclocal.
1689 * config.in, configure: Rebuild.
1691 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1693 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1695 start-sanitize-r5900
1696 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1698 * mips-opc.c: Fix coding of mtsa.
1701 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1703 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1705 * sparc-dis.c (sorted_opcodes): New static local.
1706 (struct opcode_hash): `opcode' is pointer to const element.
1707 (build_hash): First arg is now table of sorted pointers.
1708 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1709 (compare_opcodes): Update.
1711 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1713 * cgen-opc.c: #include <ctype.h>.
1714 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1715 Handle case insensitive hashing.
1716 (hash_keyword_value): Change type of `value' to unsigned int.
1718 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1720 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1721 precision FP, mark it as such. Likewise for double precision
1722 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1724 start-sanitize-r5900
1725 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1728 start-sanitize-r5900
1729 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1731 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1732 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1735 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1737 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1739 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1740 nesting depth when all the macros are expanded.
1742 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1744 * sparc-opc.c: The fcmp v9a instructions take an integer register
1745 as a destination, not a floating point register. From Christian
1746 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1748 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1750 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1751 syntax. From Roman Hodek
1752 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1754 * i386-dis.c (twobyte_has_modrm): Fix pand.
1756 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1758 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1760 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1762 * arm-dis.c: Add prototypes for arm_decode_shift and
1765 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1767 * mips-opc.c: Add r3900 insns.
1769 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1771 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1772 print delay slot instructions on the same line. When using a PC
1773 relative load, add a comment with the value being loaded if it can
1776 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1778 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1779 to pushS/popS for segment regs and byte constant so that
1780 pushw/popw printed when in 16 bit data mode.
1782 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1783 print cbtw, cwtd in 16 bit data mode.
1784 * i386-dis.c (putop): extra case W to support above.
1786 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1787 address size prefix in 16 bit address mode.
1789 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1791 * sh-dis.c: Reindent. Rename local variable fprintf to
1794 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1796 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1798 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1800 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1802 * mips16-opc.c (mip16_opcodes): same.
1804 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1806 * m68k-opc.c (moveb): Change $d to %d.
1808 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1810 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1811 (twobyte_has_modrm): Likewise.
1813 (OP_MMX, OP_EM, OP_MS): New static functions.
1815 * i386-dis.c: Revert patch of April 4. The output now matches
1818 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1820 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1823 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1825 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1827 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1829 * Makefile.in (install): Depend upon installdirs.
1830 (installdirs): New target.
1832 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1834 From Thomas Graichen <graichen@rzpd.de>:
1835 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1836 * configure: Rebuild.
1838 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1840 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1841 Delete string{,s}.h support.
1843 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1845 * cgen-asm.c (cgen_parse_operand_fn): New global.
1846 (cgen_parse_{{,un}signed_integer,address}): Update call to
1847 cgen_parse_operand_fn.
1848 (cgen_init_parse_operand): New function.
1849 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1850 from cgen_asm_init_parse.
1851 (m32r_cgen_assemble_insn): New operand `errmsg'.
1852 Delete call to as_bad, return error message to caller.
1853 (m32r_cgen_asm_hash_keywords): #if 0 out.
1855 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1857 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1859 [case 'J']: Fix typo in register name.
1861 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1863 * configure.in: Substitute SHLIB_LIBS.
1864 * configure: Rebuild.
1865 * Makefile.in (SHLIB_LIBS): New variable.
1866 ($(SHLIB)): Use $(SHLIB_LIBS).
1868 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1870 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1872 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1874 * disassemble.c (disassembler): Handle m32r.
1876 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1878 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1879 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1880 * Makefile.in (CFILES): Add them.
1881 (ALL_MACHINES): Add them.
1882 (dependencies): Regenerate.
1883 * configure.in (cgen_files): New variable.
1884 (bfd_m32r_arch): Add entry.
1885 * configure: Regenerate.
1887 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1889 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1890 * configure: Rebuild.
1892 * Makefile.in: Rebuild dependencies.
1894 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1896 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1899 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1901 * Branched binutils 2.8.
1903 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1905 * m10200-dis.c: Rename from mn10200-dis.c.
1906 * m10200-opc.c: Rename from mn10200-opc.c.
1907 * m10300-dis.c: Rename from mn10300-dis.c
1908 * m10300-opc.c: Rename from mn10300-opc.c.
1909 * Makefile.in: Update accordingly.
1911 * mips16-opc.c: Add mul and dmul macros.
1913 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1915 * makefile.vms: Update CFLAGS, add clean target.
1917 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1919 * mips-opc.c: Add "wait". From Ralf Baechle
1920 <ralf@gnu.ai.mit.edu>.
1922 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1923 * configure, config.in: Rebuild.
1924 * sysdep.h: Include <stdlib.h> if it exists.
1925 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1927 * Makefile.in: Rebuild dependencies.
1929 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1931 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1932 Andrew Bray <andy@madhouse.demon.co.uk>.
1934 * mips-opc.c: Add cast when setting mips_opcodes.
1936 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1938 * v850-dis.c (disassemble): Fix sign extension problem.
1939 * v850-opc.c (extract_d*): Fix sign extension problems to make
1940 disassembly calculate branch offsets correctly.
1942 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1944 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1946 * mips-opc.c: Add dctr and dctw.
1949 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1951 * d30v-dis.c (print_insn): Change the way signed constants
1954 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1956 * Makefile.in (BFD_H): New variable.
1957 (HFILES): New variable.
1958 (CFILES): Add all C files.
1959 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1960 Delete old dependencies, and build new ones.
1961 * dep-in.sed: New file.
1963 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1965 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1967 start-sanitize-coldfire
1968 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1970 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1973 end-sanitize-coldfire
1974 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1976 * mn10200-opc.c: Change "trap" to "syscall".
1977 * mn10300-opc.c: Add new "syscall" instruction.
1979 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1981 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1982 mulul insns on the coldfire.
1984 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1986 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1987 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1988 (print_insn_little_arm): Likewise.
1990 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1992 Based on patches from H.J. Lu <hjl@lucon.org>:
1993 * i386-dis.c (fetch_data): Add prototype.
1994 * m68k-dis.c (fetch_data): Add prototype.
1995 (dummy_print_address): Add prototype. Make static.
1996 * ppc-opc.c (valid_bo): Add prototype.
1997 * sparc-dis.c (build_hash_table): Add prototype.
1998 (is_delayed_branch, compute_arch_mask): Add prototypes.
1999 (print_insn_sparc): Make several local variables const.
2000 (compare_opcodes): Change arguments to const PTR. Add prototype.
2001 * sparc-opc.c (arg): Change name field to be const.
2002 (lookup_name, lookup_value): Add prototypes. Change table and
2003 name parameters to be const.
2004 (sparc_encode_asi): Change name parameter to be const.
2005 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2006 (sparc_encode_sparclet_cpreg): Likewise.
2007 (sparc_decode_asi): Change return type to be const.
2008 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2009 (sparc_decode_sparclet_cpreg): Likewise.
2011 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2013 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2014 Solaris doesn't like the combined options, and the -f is
2016 (stamp-tshlink, install): Likewise.
2018 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2020 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2023 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2025 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2027 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2029 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2032 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2034 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2036 start-sanitize-tic80
2037 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2039 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2041 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2043 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2046 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2048 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2049 floatformat_to_double to make portable.
2050 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2053 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2055 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2056 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2058 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2060 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2061 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2063 start-sanitize-tic80
2064 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2066 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2067 (OFF_SL_BR_SCALED): ... to this, and added the flag
2068 TIC80_OPERAND_BASEREL to the flags word.
2069 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2073 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2075 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2076 Change mips_opcodes from const array to a pointer,
2077 and change bfd_mips_num_opcodes from const int to int,
2078 so that we can increase the size of the mips opcodes table
2081 start-sanitize-tic80
2082 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2084 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2085 store BITNUM values in the table in one's complement form
2086 to match behavior when assembler is given a raw numeric
2087 value for a BITNUM operand.
2088 * tic80-dis.c (print_operand_bitnum): Ditto.
2092 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2094 * d30v-opc.c: Removed references to FLAG_X.
2097 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2099 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2102 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2104 * Makefile.in: Added d30v object files.
2105 * configure: (bfd_d30v_arch) Rebuilt.
2106 * configure.in: (bfd_d30v_arch) Added new case.
2107 * d30v-dis.c: New file.
2108 * d30v-opc.c: New file.
2109 * disassemble.c (disassembler) Add entry for d30v.
2112 start-sanitize-tic80
2113 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2115 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2116 representations for the floating point BITNUM values.
2118 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2120 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2121 in the table in one's complement form, as they appear in the
2123 (tic80_symbol_to_value): Use macros to access predefined
2125 (tic80_value_to_symbol): Ditto.
2126 (tic80_next_predefined_symbol): New function.
2127 * tic80-dis.c (print_operand_bitnum): Remove code that did
2128 one's complement for BITNUM values.
2131 start-sanitize-r5900
2132 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2134 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2137 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2139 * makefile.vms: Remove 8 bit characters. Update to latest
2142 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2144 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2146 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2148 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2149 (IMM24_PCREL): Likewise.
2151 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2153 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2154 address for an extended PC relative instruction that is not a
2157 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2159 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2162 start-sanitize-tic80
2163 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2165 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2166 (tic80_opcodes): Sort entries so that long immediate forms
2167 come after short immediate forms, making it easier for
2168 assembler to select the right one for a given operand.
2171 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2173 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2175 (print_insn_mips16): Likewise.
2177 start-sanitize-r5900
2178 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2180 * mips-opc.c: add r5900.
2183 start-sanitize-tic80
2184 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2186 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2187 a symbol class that restricts translation to just that
2188 class (general register, condition code, etc).
2190 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2192 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2193 and REG_DEST_E for register operands that have to be
2194 an even numbered register. Add REG_FPA for operands that
2195 are one of the floating point accumulator registers.
2196 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2197 (tic80_opcodes): Change entries that need even numbered
2198 register operands to use the new operand table entries.
2199 Add "or" entries that are identical to "or.tt" entries.
2202 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2204 * mips16-opc.c: Add new cases of exit instruction for
2206 * mips-dis.c (print_mips16_insn_arg): Display floating point
2207 registers in operands of exit instruction. Print `$' before
2208 register names in operands of entry and exit instructions.
2210 start-sanitize-tic80
2211 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2213 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2214 pairs for all predefined symbols recognized by the assembler.
2215 Also used by the disassembling routines.
2216 (tic80_symbol_to_value): New function.
2217 (tic80_value_to_symbol): New function.
2218 * tic80-dis.c (print_operand_control_register,
2219 print_operand_condition_code, print_operand_bitnum):
2220 Remove private tables and use tic80_value_to_symbol function.
2223 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2225 * d10v-dis.c (print_operand): Change address printing
2226 to correctly handle PC wrapping. Fixes PR11490.
2228 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2230 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2233 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2235 * mips-dis.c (print_insn_mips16): Set insn_info information.
2236 (print_mips16_insn_arg): Likewise.
2238 * mips-dis.c (print_insn_mips16): Better handling of an extend
2239 opcode followed by an instruction which can not be extended.
2241 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2243 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2244 coldfire moveb instruction to not allow an address register as
2245 destination. Although the documentation does not indicate that
2246 this is invalid, experiments uncovered unexpected behavior.
2247 Added a comment explaining the situation. Thanks to Andreas
2248 Schwab for pointing this out to me.
2250 start-sanitize-tic80
2251 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2253 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2254 entries are presorted so that entries with the same mnemonic are
2255 adjacent to each other in the table. Sort the entries for each
2256 instruction so that this is true.
2259 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2261 * m68k-dis.c: Include <libiberty.h>.
2262 (print_insn_m68k): Sort the opcode table on the most significant
2263 nibble of the opcode.
2265 start-sanitize-tic80
2266 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2268 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2269 "vsub", "vst", "xnor", and "xor" instructions.
2270 (V_a1): Renamed from V_a, msb of accumulator reg number.
2271 (V_a0): Add macro, lsb of accumulator reg number.
2273 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2275 * tic80-dis.c (print_insn_tic80): Broke excessively long
2276 function up into several smaller ones and arranged for
2277 the instruction printing function to be callable recursively
2278 to print vector instructions that have both a load and a
2279 math instruction packed into a single opcode.
2280 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2281 to explain why it comes after the other vector opcodes.
2284 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2286 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2287 move insns to handle immediate operands.
2289 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2291 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2292 fix operand mask in the "moveml" entries for the coldfire.
2294 start-sanitize-tic80
2295 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2297 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2298 New macros for building vector instruction opcodes.
2299 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2300 FMT_LI, which were unused. The field is now a flags field.
2301 Remove some opcodes that are possible, but illegal, such
2302 as long immediate instructions with doubles for immediate
2303 values. Add "vadd" and "vld" instructions.
2305 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2307 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2308 the order more logical. Move the shift alias instructions ("rotl",
2309 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2310 interspersed with the regular sr.x and sl.x instructions. Add
2311 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2312 "sub", "subu", "swcr", and "trap".
2314 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2316 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2317 (OFF_SL_PC): Renamed from OFF_SL.
2318 (OFF_SS_BR): New operand type for base relative operand.
2319 (OFF_SL_BR): New operand type for base relative operand.
2320 (REG_BASE): New operand type for base register operand.
2321 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2322 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2323 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2325 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2326 10 char field, padded with spaces on rhs, rather than a string
2327 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2328 than old TIC80_OPERAND_RELATIVE. Add support for new
2329 TIC80_OPERAND_BASEREL flag bit.
2331 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2333 * tic80-dis.c (print_insn_tic80): Print floating point operands
2335 * tic80-opc.c (SPFI): Add single precision floating point
2336 immediate operand type.
2337 (ROTATE): Add rotate operand type for shifts.
2338 (ENDMASK): Add for shifts.
2339 (n): Macro for the 'n' bit.
2340 (i): Macro for the 'i' bit.
2341 (PD): Macro for the 'PD' field.
2342 (P2): Macro for the 'P2' field.
2343 (P1): Macro for the 'P1' field.
2344 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2348 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2350 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2351 adding in current address for pc-relative operands.
2353 start-sanitize-tic80
2354 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2357 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2358 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2359 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2360 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2361 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2362 (REG_SCALED, LSI_SCALED): New operand types.
2363 (E): New macro for 'E' bit at bit 27.
2364 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2365 opcodes, including the various size flavors (b,h,w,d) for
2366 the direct load and store instructions.
2368 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2370 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2372 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2373 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2374 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2375 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2376 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2377 masks with "MASK_* & ~M_*" to get the M bit reset.
2378 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2380 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2382 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2383 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2384 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2386 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2387 CC, SICR, and LICR table entries.
2388 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2389 "bcnd", and "brcr" opcodes.
2392 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2394 * ppc-opc.c (powerpc_operands): Make comment match the
2395 actual fields (no shift field).
2396 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2397 start-sanitize-tic80
2398 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2399 partial implementation, work in progress.
2400 * tic80-opc.c (tic80_operands): Begin construction operands table.
2401 (tic80_opcodes): Continue populating opcodes table and start
2402 filling in the operand indices.
2403 (tic80_num_opcodes): Add this.
2406 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2408 * m68k-opc.c: Add #B case for moveq.
2410 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2412 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2413 before they are used.
2415 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2417 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2418 for "breakpoint" instruction.
2420 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2422 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2423 (dep): Use ALL_CFLAGS rather than CFLAGS.
2425 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2427 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2430 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2432 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2433 start-sanitize-tic80
2434 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2437 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2439 * mips16-opc.c: Add "abs".
2441 start-sanitize-tic80
2442 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2444 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2445 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2446 (disassembler): Add bfd_arch_tic80 support to set disassemble
2447 to print_insn_tic80.
2448 * tic80-dis.c (print_insn_tic80): Add stub.
2450 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2452 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2453 * configure: Regenerate with autoconf.
2454 * tic80-dis.c: Add file.
2455 * tic80-opc.c: Add file.
2458 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2460 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2462 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2464 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2465 (mn10200_opcodes): Use it for some logicals and btst insns.
2466 Add "break" and "trap" instructions.
2468 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2470 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2472 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2474 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2475 relative load or add now depends upon whether the instruction is
2478 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2480 * mn10200-dis.c: Finish writing disassembler.
2481 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2482 Fix mask for "jmp (an)".
2484 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2485 handle endianness issues for mn10300.
2487 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2489 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2491 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2492 instruction. Fix opcode field for "movb (imm24),dn".
2494 * mn10200-opc.c (mn10200_operands): Fix insertion position
2497 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2499 * mn10200-opc.c: Create mn10200 opcode table.
2500 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2501 but moving along nicely.
2503 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2505 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2507 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2509 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2510 specifiers for fmovem* instructions.
2512 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2514 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2516 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2518 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2521 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2523 * mn10300-opc.c: Add some comments explaining the various
2526 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2528 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2530 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2533 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2534 operand specifiers in fmovm* instructions.
2536 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2538 * ppc-opc.c (insert_li): Give an error if the offset has the two
2539 least significant bits set.
2541 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2543 * mips-dis.c (print_insn_mips16): Separate the instruction from
2544 the arguments with a tab, not a space.
2546 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2548 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2551 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2554 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2556 * configure: Rebuild with autoconf 2.12.
2558 Add support for mips16 (16 bit MIPS implementation):
2559 * mips16-opc.c: New file.
2560 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2561 (mips16_reg_names): New static array.
2562 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2563 after seeing a 16 bit symbol.
2564 (print_insn_little_mips): Likewise.
2565 (print_insn_mips16): New static function.
2566 (print_mips16_insn_arg): New static function.
2567 * mips-opc.c: Add jalx instruction.
2568 * Makefile.in (mips16-opc.o): New target.
2569 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2570 * configure: Rebuild.
2572 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2574 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2575 operand specifiers in *save, *restore and movem* instructions.
2577 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2580 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2581 register operands for immediate arithmetic, not, neg, negx, and
2582 set according to condition instructions.
2584 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2585 specifier of the effective-address operand in immediate forms of
2586 arithmetic instructions. The specifier for the immediate operand
2587 notes how and where the constant will be stored.
2589 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2591 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2594 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2597 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2599 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2601 * mn10300-dis.c (disassemble): Handle register lists.
2603 * mn10300-opc.c: Fix handling of register list operand for
2604 "call", "ret", and "rets" instructions.
2606 * mn10300-dis.c (disassemble): Print PC-relative and memory
2607 addresses symbolically if possible.
2608 * mn10300-opc.c: Distinguish between absolute memory addresses,
2609 pc-relative offsets & random immediates.
2611 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2613 (disassemble): Handle SPLIT and EXTENDED operands.
2615 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2617 * mn10300-dis.c: Rough cut at printing some operands.
2619 * mn10300-dis.c: Start working on disassembler support.
2620 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2622 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2624 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2626 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2628 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2630 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2632 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2633 register argument is calls and jmp instructions.
2635 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2637 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2638 getx operand. Fix opcode for mulqu imm,dn.
2640 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2642 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2643 in MN10300_OPERAND_SPLIT operands for how many bits
2644 appear in the basic insn word. Add IMM32_HIGH24,
2645 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2646 (mn10300_opcodes): Use new operands as needed.
2648 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2649 for bset, bclr, btst instructions.
2650 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2652 * mn10300-opc.c (mn10300_operands): Remove many redundant
2653 operands. Update opcode table as appropriate.
2654 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2655 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2657 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2659 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2660 operands (for indexed load/stores). Fix bitpos for DI
2661 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2662 few instructions that insert immediates/displacements in the
2663 middle of the instruction. Add IMM8E for 8 bit immediate in
2664 the extended part of an instruction.
2665 (mn10300_operands): Use new opcodes as appropriate.
2667 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2669 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2670 sequential so the assembler never parallelizes it with
2673 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2675 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2676 a data/address register that appears in register field 0
2677 and register field 1.
2678 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2680 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2682 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2683 standard disassembly.
2685 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2686 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2687 Recategorize PALcode instructions.
2689 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2691 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2693 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2695 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2696 there are no operand types.
2698 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2700 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2702 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2704 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2706 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2708 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2710 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2711 and sst.w instructions.
2713 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2716 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2718 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2721 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2723 * ppc-opc.c (PPCPWR2): Define.
2724 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2727 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2729 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2730 field for movhu instruction.
2732 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2733 cast value to "long" not "signed long" to keep hpux10
2736 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2738 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2741 * mn10300-opc.c (FMT*): Remove definitions.
2743 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2744 for shift-by-register opcodes.
2746 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2747 into [AD][MN][01] for encoding the position of the register
2750 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2752 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2753 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2755 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2757 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2758 Fix various typos. Add "PAREN" operand.
2759 (MEM, MEM2): Define.
2760 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2761 operands. Fix several typos.
2763 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2766 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2768 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2769 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2771 (mn10300_opcodes): Break opcode format out into its own field.
2772 Update many operand fields to deal with signed vs unsigned
2773 issues. Fix one or two typos in the "mov" instruction
2774 opcode, mask and/or operand fields.
2776 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2778 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2779 m68851 wasn't reset.
2781 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2783 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2784 all opcodes. Very rough cut at operands for all opcodes.
2786 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2789 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2791 * mn10200-opc.c, mn10300-opc.c: New files.
2792 * mn10200-dis.c, mn10300-dis.c: New files.
2793 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2794 * disassemble.c: Break mn10x00 support into 10200 and 10300
2796 * configure.in: Likewise.
2797 * configure: Rebuilt.
2799 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2801 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2803 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2805 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2807 * disassemble (ARCH_mn10x00): Define.
2808 (disassembler): Handle bfd_arch_mn10x00.
2809 * configure.in: Recognize bfd_mn10x00_arch.
2810 * configure: Rebuilt.
2812 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2814 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2815 accordingly. Don't declare functions using op_rtn.
2817 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2819 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2820 params to be more standard.
2821 * (disassemble): Print absolute addresses and symbolic names for
2822 branch and jump targets.
2823 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2825 * (v850_opcodes): Add breakpoint insn.
2827 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2829 * m68k-opc.c: Move the fmovemx data register cases before the
2830 other cases, so that they get recognized before the data register
2831 does gets treated as a degenerate register list.
2833 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2835 * mips-opc.c: Add a case for "div" and "divu" with two registers
2836 and a destination of $0.
2838 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2840 * mips-dis.c (print_insn_arg): Add prototype.
2841 (_print_insn_mips): Ditto.
2843 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2845 * mips-dis.c (print_insn_arg): Print condition code registers as
2848 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2850 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2852 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2854 * v850-dis.c (disassemble): Make static. Provide prototype.
2856 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2858 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2861 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2863 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2864 ']' characters into the output stream.
2865 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2866 Add "memop" field to all opcodes (for the disassembler).
2867 Reorder opcodes so that "nop" comes before "mov" and "jr"
2868 comes before "jarl".
2870 * v850-dis.c (print_insn_v850): Fix typo in last change.
2872 * v850-dis.c (print_insn_v850): Properly handle disassembling
2873 a two byte insn at the end of a memory region when the memory
2874 region's size is only two byte aligned.
2876 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2878 * v850-dis.c (v850_reg_names): Define.
2879 (v850_sreg_names, v850_cc_names): Likewise.
2880 (disassemble): Very rough cut at printing operands (unformatted).
2882 * v850-opc.c (BOP_MASK): Fix.
2883 (v850_opcodes): Fix mask for jarl and jr.
2885 * v850-dis.c: New file. Skeleton for disassembler support.
2886 * Makefile.in Remove v850 references, they're not needed here.
2887 * configure.in: Add v850-dis.o when building v850 toolchains.
2888 * configure: Rebuilt.
2889 * disassemble.c (disassembler): Call v850 disassembler.
2891 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2892 (insert_d8_6, extract_d8_6): New functions.
2893 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2894 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2896 (IF4A, IF4B): Use "D7" instead of "D7S".
2897 (IF4C, IF4D): Use "D8_7" instead of "D8".
2898 (IF4E, IF4F): New. Use "D8_6".
2899 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2900 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2902 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2903 (v850_operands): Change D16 to D16_15, use special insert/extract
2904 routines. New new D16 that uses the generic insert/extract code.
2905 (IF7A, IF7B): Use D16_15.
2906 (IF7C, IF7D): New. Use D16.
2907 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2909 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2910 message. Issue an error if the branch offset is odd.
2912 * v850-opc.c: Add notes about needing special insert/extract
2913 for all the load/store insns, except "ld.b" and "st.b".
2915 * v850-opc.c (insert_d22, extract_d22): New functions.
2916 (v850_operands): Use insert_d22 and extract_d22 for
2918 (insert_d9): Fix range check.
2920 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2922 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2923 and set bits field to D9 and D22 operands.
2925 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2927 * v850-opc.c (v850_operands): Define SR2 operand.
2928 (v850_opcodes): "ldsr" uses R1,SR2.
2930 * v850-opc.c (v850_opcodes): Fix opcode specs for
2931 sld.w, sst.b, sst.h, sst.w, and nop.
2933 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2935 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2936 end of the opcode table.
2938 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2940 * d10v-opc.c (pre_defined_registers): Added register pairs,
2941 "r0-r1", "r2-r3", etc.
2943 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2945 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2946 Create I16U for an unsigned 16bit mmediate operand.
2947 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2949 * v850-opc.c (v850_operands): Define EP operand.
2950 (IF4A, IF4B, IF4C, IF4D): Use EP.
2952 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2953 with immediate operand, "movhi". Tweak "ldsr".
2955 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2956 correct. Get sld.[bhw] and sst.[bhw] closer.
2958 * v850-opc.c (v850_operands): "not" is a two byte insn
2960 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2962 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2964 * v850-opc.c (two): Get order of words correct.
2966 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2968 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2969 register source and destination operands.
2970 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2972 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2973 same thinko in "trap" opcode.
2975 * v850-opc.c (v850_opcodes): Add initializer for size field
2978 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2979 Add D8 for 8-bit unsigned field in short load/store insns.
2980 (IF4A, IF4D): These both need two registers.
2981 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2982 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2983 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2984 for "ldsr" and "stsr".
2985 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2988 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2989 short store word (sst.w).
2991 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2993 * v850-opc.c (v850_operands): Added insert and extract fields,
2994 pointers to functions that handle unusual operand encodings.
2996 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2998 * v850-opc.c (v850_opcodes): Enable "trap".
3000 * v850-opc.c (v850_opcodes): Fix order of displacement
3001 and register for "set1", "clr1", "not1", and "tst1".
3003 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3005 * v850-opc.c (v850_operands): Add "B3" support.
3006 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3009 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3011 * v850-opc.c: Close unterminated comment.
3013 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3015 * v850-opc.c (v850_operands): Add flags field.
3016 (v850_opcodes): add move opcodes.
3018 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3020 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3021 * configure: (bfd_v850v_arch) Add new case.
3022 * configure.in: (bfd_v850_arch) Add new case.
3023 * v850-opc.c: New file.
3025 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3027 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3029 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3031 * d10v-opc.c: Add additional information to the opcode
3032 table to help determinine which instructions can be done
3035 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3037 * mpw-make.sed: Update editing of include pathnames to be
3040 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3042 * arm-opc.h: Added "bx" instruction definition.
3044 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3046 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3048 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3050 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3052 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3054 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3056 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3058 * makefile.vms: Update for alpha-opc changes.
3060 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3062 * i386-dis.c (print_insn_i386): Actually return the correct value.
3063 (ONE, OP_ONE): #ifdef out; not used.
3065 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3067 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3068 Changed subi operand type to treat 0 as 16.
3070 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3072 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3075 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3077 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3078 memory transfer instructions. Add new format string entries %h and %s.
3079 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3082 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3084 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3085 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3087 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3089 * alpha-dis.c (print_insn_alpha_osf): Remove.
3090 (print_insn_alpha_vms): Remove.
3091 (print_insn_alpha): Make globally visible. Chose the register
3092 names based on info->flavour.
3093 * disassemble.c: Always return print_insn_alpha for the alpha.
3095 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3097 * d10v-dis.c (dis_long): Handle unknown opcodes.
3099 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3101 * d10v-opc.c: Changes to support signed and unsigned numbers.
3102 All instructions with the same name that have long and short forms
3103 now end in ".l" or ".s". Divs added.
3104 * d10v-dis.c: Changes to support signed and unsigned numbers.
3106 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3108 * d10v-dis.c: Change all functions to use info->print_address_func.
3110 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3112 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3113 move ccr/sr insns more strict so that the disassembler only
3114 selects them when the addressing mode is data register.
3116 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3117 * d10v-opc.c (pre_defined_registers): Declare.
3118 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3119 to pick a better name for the registers.
3121 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3123 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3124 operands for fexpand and fpmerge. From Christian Kuehnke
3125 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3127 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3129 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3130 print routine. Take new regnames and cpumask arguments.
3131 Kill the environment variable nonsense.
3132 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3133 (print_insn_alpha_vms): New function. Do VMS style regnames.
3134 * disassemble.c (disassembler): Test bfd flavour to pick
3135 between OSF and VMS routines. Default to OSF.
3137 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3139 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3140 * configure: Rebuild.
3141 * Makefile.in (install): Use @INSTALL_SHLIB@.
3143 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3145 * configure: (bfd_d10v_arch) Add new case.
3146 * configure.in: (bfd_d10v_arch) Add new case.
3147 * d10v-dis.c: New file.
3148 * d10v-opc.c: New file.
3149 * disassemble.c (disassembler) Add entry for d10v.
3151 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3153 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3154 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3156 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3158 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3159 distinguish between variants of the instruction set.
3160 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3161 distinguish between variants of the instruction set.
3163 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3165 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3166 the 8086 instruction set.
3167 * i386-dis.c: General cleanups. Make most things static. Add
3168 prototypes. Get rid of static variables aflags and dflags. Pass
3169 them as args (to almost everything).
3171 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3173 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3175 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3177 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3178 if the next arg is marked with SRC_IN_DST. Gross.
3180 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3181 we're looking for and find EXR.
3183 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3184 if we're looking for KBIT and we don't find it.
3186 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3189 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3190 3bit immediate operands.
3192 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3194 * Released binutils 2.7.
3196 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3197 <kkaempf@progis.ac-net.de>.
3199 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3201 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3203 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3205 * sparc-dis.c (print_insn_sparclite): New routine to print
3206 sparclite instructions.
3208 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3210 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3212 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3214 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3215 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3216 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3218 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3220 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3221 Use autoconf-set values.
3222 (docdir, oldincludedir): Removed.
3223 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3225 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3227 * alpha-opc.c: New file.
3228 * alpha-opc.h: Remove.
3229 * alpha-dis.c: Complete rewrite to use new opcode table.
3230 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3231 * configure: Rebuild with autoconf 2.10.
3232 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3233 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3235 (alpha-opc.o): New target.
3237 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3239 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3240 Set imm_added_to_rs1 even if the source and destination register
3243 * sparc-opc.c: Add some two operand forms of the wr instruction.
3245 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3247 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3250 * disassemble.c (disassembler): Handle H8/S.
3251 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3253 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3255 * sparc-opc.c: Add beq/teq as aliases for be/te.
3257 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3258 <sergei@msil.sps.mot.com>.
3260 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3262 * makefile.vms: New file.
3264 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3266 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3268 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3271 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3273 * i386-dis.c (OP_OFF): Call append_prefix.
3275 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3277 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3278 unsigned long to silence a warning from the Solaris PowerPC
3281 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3283 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3285 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3287 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3289 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3290 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3291 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3292 cpush, cpusha, cpull sparclet insns.
3294 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3296 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3298 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3301 Set F_FLOAT on other floating point instructions.
3303 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3305 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3307 (powerpc_opcodes): Add 860/821 specific SPRs.
3309 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3311 * configure.in: Permit --enable-shared to specify a list of
3312 directories. Set and substitute BFD_PICLIST.
3313 * configure: Rebuild.
3314 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3315 uses. Set to @BFD_PICLIST@.
3317 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3319 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3320 not "abs", which may be needed for the absolute in something
3321 like btst #0,@10:8. Print L_3 immediates separately from other
3322 immediates. Change ABSMOV reference to ABS8MEM.
3324 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3326 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3327 (current_arch_mask): New static global.
3328 (compute_arch_mask): New static function.
3329 (print_insn_sparc): Delete sparc_v9_p. New static local
3330 current_mach. Resort opcode table if current_mach changes.
3331 Generalize "insn not supported" test.
3332 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3333 Delete test for v9/!v9.
3334 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3336 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3337 (brfcx): Renamed to FBRX.
3338 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3339 coprocessor mnemonics are not supported on the sparclet).
3340 (condf): Renamed to CONDF.
3341 (SLCBCC2): Delete F_ALIAS flag.
3343 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3345 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3346 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3348 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3350 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3351 that the shared library version number is set correctly.
3353 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3355 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3356 Miles Bader <miles@gnu.ai.mit.edu>.
3357 * configure: Rebuild.
3359 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3361 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3364 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3366 * configure: Rebuild with autoconf 2.8.
3368 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3370 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3371 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3373 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3375 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3376 since they appear as targets in Makefile.in.
3377 * configure: Rebuild.
3379 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3381 * mpw-make.sed: Edit out shared library support bits.
3383 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3385 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3386 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3387 (sparc_opcodes): Add sparclet insns.
3388 (sparclet_cpreg_table): New static local.
3389 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3390 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3392 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3394 * i386-dis.c (index16): New static variable.
3395 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3397 (OP_indirE): Return result of OP_E.
3398 (OP_E): Check for 16 bit addressing mode, and disassemble
3399 correctly. Optimised 32 bit case a little. Don't print
3400 "(base,index,scale)" when sib specifies only an offset.
3402 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3404 * configure.in: Set and substitute SHLIB_DEP.
3405 * configure: Rebuild.
3406 * Makefile.in (SHLIB_DEP): New variable.
3407 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3408 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3409 COMMON_SHLIB, add them to piclist with appropriate modifications.
3410 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3411 here: just use piclist.
3413 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3415 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3416 (print_insn_sparc): Rewrite v9/not-v9 tests.
3417 (compare_opcodes): Likewise.
3418 * sparc-opc.c (MASK_<ARCH>): Define.
3419 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3420 (sparclet,v6notv9): Define.
3421 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3422 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3424 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3426 * configure.in: Call AC_PROG_CC before configure.host.
3427 * configure: Rebuild.
3429 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3431 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3433 * i386-dis.c (onebyte_has_modrm): New static array.
3434 (twobyte_has_modrm): New static array.
3435 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3437 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3439 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3442 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3444 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3447 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3449 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3450 m68010up, not just m68020up | cpu32.
3452 * Makefile.in (SONAME): New variable.
3453 ($(SHLINK)): Make a link to the transformed name, as well.
3454 (stamp-tshlink): New target.
3455 (install): Skip stamp-tshlink during install.
3457 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3459 * configure.in: Call AC_ARG_PROGRAM.
3460 * configure: Rebuild.
3461 * Makefile.in (program_transform_name): New variable.
3462 (install): Transform library name before installing it.
3464 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3466 * i960-dis.c (mem): Add HX dcinva instruction.
3468 Support for building as a shared library, based on patches from
3469 Alan Modra <alan@spri.levels.unisa.edu.au>:
3470 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3471 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3472 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3473 * configure: Rebuild.
3474 * Makefile.in (ALLLIBS): New variable.
3475 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3476 (COMMON_SHLIB, SHLINK): New variables.
3477 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3478 (STAGESTUFF): Remove variable.
3479 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3480 (stamp-piclist, piclist): New targets.
3481 ($(SHLIB), $(SHLINK)): New targets.
3482 ($(OFILES)): Depend upon stamp-picdir.
3483 (disassemble.o): Build twice if PICFLAG is set.
3484 (MOSTLYCLEAN): Add pic/*.o.
3485 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3486 (distclean): Remove pic and stamp-picdir.
3487 (install): Install shared libraries.
3488 (stamp-picdir): New target.
3490 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3492 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3493 Print unknown instruction as "unknown", rather than in hex.
3495 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3497 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3499 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3501 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3503 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3505 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3506 when necessary. From Ulrich Drepper
3507 <drepper@myware.rz.uni-karlsruhe.de>.
3509 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3511 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3512 sparc_num_opcodes. Update architecture enum values.
3513 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3514 (sparc_opcode_lookup_arch): New function.
3515 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3516 (sparc_opcodes): Add v9a shutdown insn.
3518 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3520 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3521 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3523 (print_insn_sparc64): Deleted.
3524 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3527 * sparc-opc.c (architecture_pname): Add v9a.
3529 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3531 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3532 incorrectly defined as 0x16 when it should be 0x15.
3533 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3534 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3535 excb (exception barrier) which is defined in the Alpha
3536 Architecture Handbook version 2.
3537 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3538 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3539 disassembled as or, for example.
3541 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3543 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3544 (_print_insn_mips): Change i from int to unsigned int.
3546 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3548 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3549 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3551 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3553 * i386-dis.c: Added Pentium Pro instructions.
3555 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3557 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3560 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3562 * sh-opc.h (sh_nibble_type): Added REG_B.
3563 (sh_arg_type): Added A_REG_B.
3564 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3566 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3568 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3570 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3572 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3574 * Makefile.in (distclean): Remove stamp-h. From Ronald
3575 F. Guilmette <rfg@monkeys.com>.
3577 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3579 From David Mosberger-Tang <davidm@azstarnet.com>:
3580 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3583 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3585 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3586 (sh_table): Added many SH3 opcodes.
3587 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3589 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3591 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3592 (subco,subco.): Mark this PPC, not PPCCOM.
3594 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3596 * configure: Rebuild with autoconf 2.7.
3598 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3600 * configure: Rebuild with autoconf 2.6.
3602 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3604 * configure.in: Sort list of architectures. Accept but do nothing
3605 for alliant, convex, pyramid, romp, and tahoe.
3607 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3609 * a29k-dis.c (print_special): Change num to unsigned int.
3611 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3613 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3616 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3618 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3619 * configure: Rebuilt.
3621 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3623 * configure.in: Add case for bfd_i860_arch.
3624 * configure: Rebuild.
3626 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3628 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3629 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3630 (NEXTDOUBLE): Likewise.
3631 (print_insn_m68k): Don't match fmoveml if there is more than one
3632 register in the list.
3633 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3635 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3637 * m68k-opc.c: Use #W rather than #w.
3638 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3640 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3642 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3643 and likewise for all the dbxx opcodes.
3645 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3647 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3649 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3651 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3652 the VR4100 specific instructions to the mips_opcodes structure.
3654 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3656 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3657 ugly Metrowerks bug in CW6, is fixed in CW7.
3659 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3661 * ppc-opc.c (whole file): Add flags for common/any support.
3663 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3665 * Makefile.in (BISON): Remove macro.
3666 (FLAGS_TO_PASS): Remove BISON.
3668 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3670 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3672 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3673 instructions that take no args by looking at the match mask.
3674 (print_insn_arg): Always print "%" before register names.
3675 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3676 [case '_']: Don't print "@#" before address.
3677 [case 'J']: Use "%s" as format string, not register name.
3678 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3680 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3682 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3685 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3687 From David Mosberger-Tang <davidm@azstarnet.com>
3689 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3690 (alpha_insn_set): added definitions for VAX floating point
3691 instructions (Unix compilers don't generate these, but handcoded
3692 assembly might still use them).
3694 * alpha-dis.c (print_insn_alpha): added support for disassembling
3695 the miscellaneous instructions in the Alpha instruction set.
3697 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3699 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3700 no longer create sysdep.h, sed ppc-opc.c to work around a
3701 serious Metrowerks C bug.
3702 * mpw-make.in: Remove.
3703 * mpw-make.sed: New file, used by mpw-configure to edit
3704 Makefile.in into an MPW makefile.
3706 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3708 * Makefile.in (maintainer-clean): New synonym for realclean.
3710 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3712 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3713 which use '0', '1', and '2' instead. Specify the proper size for
3714 a pmove immediate operand. Correct the pmovefd patterns to be
3715 moves to a register, not from a register.
3716 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3718 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3720 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3721 %psr, %wim, %tbr as F_NOTV9.
3723 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3725 * Makefile.in (Makefile): Just rebuild Makefile when running
3727 (config.h, stamp-h): New targets.
3728 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3729 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3730 rebuilding config.h.
3731 * configure: Rebuild.
3733 * mips-opc.c: Change unaligned loads and stores with "t,A"
3734 operands to use "t,A(b)".
3736 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3738 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3740 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3742 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3743 until 3 instead of until 2.
3745 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3747 * Makefile.in (ALL_CFLAGS): Define.
3748 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3749 (MOSTLYCLEAN): Add config.log.
3750 (distclean): Don't remove config.log.
3751 * configure.in: Substitute HDEFINES.
3752 * configure: Rebuild.
3754 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3756 * sh-opc.h (sh_arg_type): Add F_FR0.
3757 (sh_table, case fmac): Add F_FR0 as first argument.
3759 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3761 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3763 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3765 * sparc-dis.c: Remove all references to NO_V9.
3767 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3769 * aclocal.m4: Just include ../bfd/aclocal.m4.
3770 * configure: Rebuild.
3772 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3774 * sparc-dis.c (X_DISP19): Define.
3775 (print_insn, case 'G'): Use it.
3776 (print_insn, case 'L'): Sign extend displacement.
3778 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3780 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3781 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3782 host_makefile_frag or frags.
3783 * aclocal.m4: New file.
3784 * configure: Rebuild.
3785 * Makefile.in (INSTALL): Set to @INSTALL@.
3786 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3787 (INSTALL_DATA): Set to @INSTALL_DATA@.
3789 (AR_FLAGS): Set to rc rather than qc.
3790 (CC): Define as @CC@.
3791 (CFLAGS): Set to @CFLAGS@.
3792 (@host_makefile_frag@): Remove.
3793 (config.status): Remove dependency upon @frags@.
3795 * configure.in: ../bfd/config.bfd now just sets shell variables.
3796 Use them rather than looking through target Makefile fragments.
3797 * configure: Rebuild.
3799 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3801 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3803 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3805 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3806 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3809 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3810 (lookup_{name,value}): New functions.
3811 (prefetch_table): New static local.
3812 (sparc_{encode,decode}_prefetch): New functions.
3813 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3815 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3817 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3820 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3822 * sh-dis.c: Correct comment on first line of file.
3824 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3826 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3828 * sparc-opc.c (asi, membar): New static locals.
3829 (sparc_{encode,decode}_{asi,membar}): New functions.
3830 (sparc_opcodes, membar insn): Fix.
3831 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3832 Support decoding of membar masks.
3835 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3837 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3839 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3841 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3842 and likewise for the other branches. Add bhs as an alias for bcc,
3843 and likewise for the size variants. Add dbhs as an alias for
3846 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3848 * sh-opc.h (FP sts instructions): Update to match reality.
3850 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3852 * m68k-dis.c: (fpcr_names): Add % before all register names.
3853 (reg_names): Likewise.
3854 (print_insn_arg): Don't explicitly print % before register names.
3855 Add % before register names in static array names. In case 'r',
3856 print data registers as `@(Dn)', not `Dn@'. When printing a
3857 memory address, don't print @# before it.
3858 (print_indexed): Change base_disp and outer_disp from int to
3859 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3860 syntax. Sign extend 8 byte displacement correctly.
3861 (print_base): Print using MIT syntax. Print zpc when appropriate.
3862 Change parameter disp from int to bfd_vma.
3864 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3867 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3869 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3870 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3871 * sh-opc.h (sh_arg_type): Add new operand types.
3872 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3874 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3876 * Makefile.in (distclean): Remove generated file config.h.
3878 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3880 * Makefile.in (distclean): Remove generated file config.h.
3882 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3884 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3886 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3888 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3889 rather than numopcodes. Use m68k_opcodes rather than removed
3890 opcode function. Don't check F_ALIAS.
3891 (print_insn_arg): Change first parameter to be const char *.
3892 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3893 (m68k-opc.o): New target.
3894 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3895 * configure: Rebuild.
3897 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3899 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3900 (opcode_bits, opcode_hash_table): New variables.
3901 (opcodes_initialized): Renamed from opcodes_sorted.
3902 (build_hash_table): New function.
3903 (is_delayed_branch): Use hash table.
3904 (print_insn): Renamed from print_insn_sparc, made static.
3905 Build and use hash table. If !sparc64, ignore sparc64 insns,
3906 and vice-versa if sparc64.
3907 (print_insn_sparc, print_insn_sparc64): New functions.
3908 (compare_opcodes): Move sparc64 opcodes to end.
3909 Print commutative insns with constant second.
3910 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3912 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3914 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3915 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3916 avoids printing a delay slot in a delay slot.
3917 * sh-opc.h (sh_table): Fully bracket last entry.
3919 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3921 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3923 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3925 * configure.in: Get host_makefile_frag from ${srcdir}.
3927 * configure.in: Autoconfiscated. Check for string[s].h. Create
3928 config.h from config.in. Don't set up sysdep.h link.
3929 * sysdep.h: New file.
3930 * configure, config.in: New files, generated from configure.in.
3931 * Makefile.in: Updated to be processed autoconf-style.
3932 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3933 (Makefile): Depend on config.status.
3934 (config.status): New rule.
3935 * configure.bat: Update Makefile substitutions.
3937 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3939 * mips-opc.c (L1): Define.
3940 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3941 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3944 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3946 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3947 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3948 have multiple add units but only a single logical unit.
3950 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3951 shifted by 18, without any insertion or extraction function.
3952 (insert_cr, extract_cr): Remove.
3954 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3956 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3959 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3961 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3962 * sh-opc.h: Add copyright.
3964 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3966 * Makefile.in (crunch-m68k): Delete extra target accidentally
3967 checked in a while ago.
3969 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3971 * sh-opc.h (sh_table): Add SH3 support.
3973 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3975 * sh-opc.h: Added bsrf and braf.
3977 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3979 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3980 bogus [ls]fm{ea,fd} patterns.
3982 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3983 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3984 initialize it from memory. Make function static.
3985 (print_insn_{big,little}_arm): New functions.
3986 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3987 the correct endianness.
3989 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3991 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3994 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3996 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3997 17th, so that it builds again using GCC as the compiler.
3999 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4001 * mips-dis.c (print_insn_little_mips): Cast return value from
4002 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4003 expects an unsigned long, and that might be fewer words of
4004 argument storage (e.g., if bfd_vma is long long on a 32-bit
4006 (print_insn_big_mips): Likewise with bfd_getb32 value.
4007 (_print_insn_mips): Now static.
4009 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4011 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4012 gcc memory hog problem with initializer is fixed.
4014 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4016 Merge in support for Mac MPW as a host.
4017 (Old change descriptions retained for informational value.)
4019 * mpw-config.in (archname): Compute from the config.
4020 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4022 * mpw-config.in (target_arch): Compute from canonical target.
4023 (m68k, mips, powerpc, sparc): Add architectures.
4024 * mpw-make.in (disassemble.c.o): Add.
4025 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4027 * mpw-config.in (BFD_MACHINES): Set to a default value.
4028 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4030 * mpw-make.in (CSEARCH): Add extra-include to search path.
4032 * mpw-config.in (varargs.h): Don't create.
4033 (sysdep.h): Create using forward-include.
4034 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4036 * mpw-config.in: New file, MPW version of configure.in.
4037 * mpw-make.in: New file, MPW version of Makefile.in.
4039 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4041 * alpha-dis.c (print_insn_alpha): Put empty statement after
4044 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4046 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4047 (low_sign_extend): Likewise.
4048 (get_field): Delete unused function.
4049 (set_field, deposit_14, deposit_21): Likewise.
4051 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4053 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4056 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4058 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4060 * alpha-opc.h (OSF_ASMCODE): define
4061 print pal-code names as defined in App C of the
4062 Alpha Architecture Reference Manual
4064 * alpha-dis.c: cleaned up output
4065 print stylized code forms as defined in App A.4.3 of the
4066 Alpha Architecture Reference Manual
4068 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4070 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4072 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4075 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4077 * m68k-dis.c (opcode): New function. Returns address of opcode
4078 table entry given index, even if the opcode table was split to
4079 work around gcc bugs.
4080 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4082 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4083 (reg_names): Now const.
4084 (print_insn_arg): Arrays cacheFieldName and names now const.
4085 (print_indexed): Array scales now const.
4087 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4089 * ppc-opc.c: Sort recently added instructions by minor opcode
4090 number within major opcode number.
4092 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4094 * hppa-dis.c: Include libhppa.h.
4096 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4098 * mips-opc.c: Change dli to use M_DLI, and add dla.
4100 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4102 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4104 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4106 * mips-opc.c: Add r4650 mul instruction.
4108 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4110 * mips-opc.c: Add uld and usd macros for unaligned double load and
4113 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4115 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4116 mfdcr, mtdcr, icbt, iccci.
4118 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4120 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4121 signed char fields to shorts, more portable.
4123 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4125 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4126 char fields as signed chars, since they may have negative values.
4128 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4130 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4131 (mycroft@netbsd.org).
4133 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4135 From "Logg, Ed" <elogg@ea.com>:
4136 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4137 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4140 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4142 * ppc-opc.c: Changes based on patch from David Edelsohn
4143 <edelsohn@mhpcc.edu>.
4144 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4147 (insert_tbr): New static function.
4148 (extract_tbr): New static function.
4149 (XFXFXM_MASK, XFXM): Define.
4150 (XSPRBAT_MASK, XSPRG_MASK): Define.
4151 (powerpc_opcodes): Add instructions to access special registers by
4152 name. Add mtcr and mftbu.
4154 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4156 * mips-opc.c (P3): Define.
4157 (mips_opcodes): Add mad and madu.
4159 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4161 * configure.in: Add W65 support.
4162 * disassemble.c: Likewise.
4163 * w65-opc.h, w65-dis.c: New files.
4165 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4167 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4170 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4172 * mips-opc.c: Add dli as a synonym for li.
4174 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4176 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4177 print something for reserved opcode values, even if it won't
4180 * mips-dis.c (_print_insn_mips): When initializing, shift right
4181 and mask, to avoid sign extension problems on the Alpha.
4183 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4186 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4188 * sh-opc.h (mov.l gbr): Get direction right.
4189 * sh-dis.c (print_insn_shx): New function.
4190 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4191 print opcodes with right byte order.
4193 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4195 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4196 to avoid conflicts with getopt.
4198 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4200 * hppa-dis.c (print_insn_hppa): Read the instruction using
4201 bfd_getb32, so that it works on a little endian or 64 bit host.
4202 Remove unused local variable op.
4204 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4206 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4207 addu does not work correctly if -mips3.
4209 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4211 * a29k-dis.c (print_special): Add special register names defined
4212 on 29030, 29040 and 29050.
4213 (print_insn): Handle new operand type 'I'.
4215 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4217 * Makefile.in (INSTALL): Use top level install.sh script.
4219 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4221 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4222 that it works on a little endian host.
4224 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4226 * configure.in: Use ${config_shell} when running config.bfd.
4228 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4230 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4232 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4234 * a29k-dis.c (print_insn): Print the opcode.
4236 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4238 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4240 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4242 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4244 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4246 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4247 which store a value into memory.
4249 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4251 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4252 * arm-dis.c, arm-opc.h: New files.
4254 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4256 * Makefile.in (ns32k-dis.o): Add dependency.
4257 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4258 string, not as array of chars.
4260 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4262 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4264 * sparc-opc.c: Added sparclite extended FP operations, and
4265 versions of v9 impdep* instructions permitting specification of
4268 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4270 * i960-dis.c (reg_names): Now const.
4271 (struct sparse_tabent): New type, copied from array type in mem
4273 (ctrl): Local static array ctrl_tab now const.
4274 (cobr): Local static array cobr_tab now const.
4275 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4276 static variable mem_tab no longer explicitly initialized. Changed
4277 mem_init to const array of struct sparse_tabent.
4278 (reg): Local static variable reg_tab no longer explicitly
4279 initialized. Changed reg_init to const array of struct
4281 (ea): Local static array scale_tab now const.
4283 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4286 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4288 * configure.bat: the disassember needs to be enabled for
4289 "objdump -d" to work in djgpp.
4291 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4293 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4294 (invalid_float): Enabled general version, doesn't require running
4295 on ns32k host. Changed to take char* argument, and test for
4296 explicitly specified sizes, instead of using sizeof() on host CPU
4298 (INVALID_FLOAT): Cast first argument.
4299 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4300 list_P032, list_M032): Now const.
4301 (optlist, list_search): Made appropriate arguments now point to
4303 (print_insn_arg): Changed static array of one-character-string
4304 pointers into a static const array of characters; fixed sprintf
4305 statement accordingly.
4307 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4309 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4310 from distribution. A ns32k-dis.c from a previous distribution has
4311 been brought up to date and supports the new interface.
4313 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4315 * configure.in: add bfd_ns32k_arch target support.
4317 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4318 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4320 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4322 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4325 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4327 * h8300-dis.c, mips-dis.c: Don't use true and false.
4329 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4331 * configure.in: Change --with-targets to --enable-targets.
4333 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4335 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4336 opcodes to the first instruction with that opcode, to speed
4337 disassembly of large files. From ralphc@pyramid.com (Ralph
4340 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4342 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4344 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4346 * configure.bat: update to latest makefile.in
4348 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4350 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4351 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4352 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4353 slot insn is in a delay slot.
4354 * z8k-opc.h: (resflg): Fix patterns.
4355 * h8500-opc.h Fix CR insn patterns.
4357 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4359 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4360 "cmpl" before POWER versions, so that gas -many uses them.
4362 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4364 * disassemble.c: New file.
4365 * Makefile.in (OFILES): Add disassemble.o.
4366 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4367 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4368 binutils/configure.in.
4370 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4371 opcode being examined.
4373 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4375 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4376 (insert_ral, insert_ram, insert_ras): New functions.
4377 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4378 RAS for store with update.
4380 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4382 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4383 (edelsohn@npac.syr.edu).
4385 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4387 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4390 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4392 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4394 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4396 * ppc-opc.c (powerpc_operands): The signedp field has been
4397 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4398 instead. Add new operand SISIGNOPT.
4399 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4400 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4401 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4404 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4406 * i386-dis.c (struct private): Renamed to dis_private. `private'
4407 is a reserved word for dynix cc.
4409 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4411 * configure.in: Change error message to refer to bfd/config.bfd
4412 rather than bfd/configure.in.
4414 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4416 * ppc-opc.c: Define POWER2 as short alias flag.
4417 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4420 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4422 * i960-dis.c (print_insn_i960): Don't read a second word for
4423 opcodes 0, 1, 2 and 3.
4425 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4427 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4429 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4431 * m68881-ext.c: Removed; no longer used.
4432 * Makefile.in: Changed accordingly.
4434 * m68k-dis.c (ext_format_68881): Don't declare.
4435 (print_insn_m68k): If an instruction uses place 'i', it uses at
4436 least four fixed bytes.
4437 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4438 extended float, convert to double using floatformat_to_double, not
4439 ieee_extended_to_double, and fetch the data before converting it.
4441 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4443 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4444 davidj@ICSI.Berkeley.EDU (David Johnson).
4446 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4448 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4449 PowerPC uses bdnz[l][a].
4451 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4453 * dis-buf.c, i386-dis.c: Include sysdep.h.
4455 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4457 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4459 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4460 by Motorola PowerPC 601 with PPC_OPCODE_601.
4461 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4462 Disassemble Motorola PowerPC 601 instructions as well as normal
4463 PowerPC instructions.
4465 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4467 * i960-dis.c (reg, mem): Just use a static array instead of
4470 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4472 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4473 condition name index if this is for a negated condition.
4475 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4476 Floating point format for 'H' operand is backwards from normal
4477 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4478 operands (fmpyadd and fmpysub), handle bizarre register
4479 translation correctly for single precision format.
4481 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4482 or 'I' operands if the next format specifier is 'M' (fcmp
4483 condition completer).
4485 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4487 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4488 single number giving a bitmask for the MB and ME fields of an M
4489 form instruction. Change NB to accept 32, and turn it into 0;
4490 also turn 0 into 32 when disassembling. Seperated SH from NB.
4491 (insert_mbe, extract_mbe): New functions.
4492 (insert_nb, extract_nb): New functions.
4493 (SC_MASK): Mask out SA and LK bits.
4494 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4495 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4496 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4497 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4498 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4499 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4500 (powerpc_macros): Define table of macro definitions.
4501 (powerpc_num_macros): Define.
4503 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4504 if PPC_OPERAND_NEXT is set.
4506 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4508 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4509 char. Retrieve contents using bfd_getl32 instead of shifting.
4511 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4513 * ppc-opc.c: New file. Opcode table for PowerPC, including
4514 opcodes for POWER (RS/6000).
4515 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4516 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4517 (CFILES): Add ppc-dis.c.
4518 (ppc-dis.o, ppc-opc.o): New targets.
4519 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4521 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4523 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4524 No space before 'u', 'f', or 'N'.
4526 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4528 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4529 farther than we should.
4531 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4533 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4535 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4537 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4539 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4540 needs it, to prevent reading past the end of a section.
4542 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4544 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4545 Removed t,A case for la; always use t,A(b) case.
4547 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4549 From Ted Lemen <mellon@pepper.ncd.com>
4550 * mips-dis.c (print_insn_arg): Handle 'k'.
4551 * mips-opc.c: Make cache use k, not t.
4553 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4555 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4556 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4557 FLOAT_FORMAT_CODE to put out floating point register names.
4559 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4561 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4563 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4565 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4567 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4569 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4570 larger than 32. Moved dsxx32 variants first for disassembler.
4572 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4574 * z8kgen.c, z8k-opc.h: Add full lda information.
4576 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4578 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4579 movb instructions. Any necessary space will be emitted by
4580 the code to handle nullification completers.
4582 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4584 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4586 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4588 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4589 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4591 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4593 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4595 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4597 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4598 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4600 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4602 * m88k-dis.c (m88kdis): comment change. Remove space after
4604 (printop): handle new arg types DEC and XREG for m88110.
4606 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4608 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4609 type for absolute branch addresses. Delete special
4610 "ble" and "be" code in 'W' operand code.
4612 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4614 * mips-opc.c: Set hazard information correctly for branch
4615 likely instructions.
4617 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4619 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4620 info->fprintf_func for printing and info->print_address_func for
4623 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4625 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4627 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4629 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4630 Corrected second case of "b" for disassembler.
4632 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4634 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4635 to BFD swapping routines to correspond to BFD name changes.
4637 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4639 * mips-opc.c: Change div machine instruction to be z,s,t rather
4640 than s,t. Change div macro to be d,v,t rather than d,s,t.
4641 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4642 rem and remu which generates only the corresponding div
4643 instruction. This is for compatibility with the MIPS assembler,
4644 which only generates the simple machine instruction when an
4645 explicit destination of $0 is used.
4646 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4648 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4650 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4651 WR_31 hazard for bal, bgezal, bltzal.
4653 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4655 * hppa-dis.c (print_insn_hppa): Use print function
4656 from within the disassemble_info, not fprintf_filtered.
4658 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4660 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4661 Law, law@cs.utah.edu.)
4663 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4665 * mips-opc.c ("absu"): Removed.
4668 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4670 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4671 Changed hazard information to distinguish between memory load
4672 delays and coprocessor load delays.
4674 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4676 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4678 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4680 * configure.in: Don't pass cpu to config.bfd.
4682 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4684 * m88k-dis.c (m88kdis): Make class unsigned.
4686 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4688 * alpha-dis.c (print_insn_alpha): One branch format case was
4689 missing the instruction name.
4691 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4693 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4694 Add the arch-specific auxiliary files.
4695 (OFILES): Remove the arch-specific auxiliary files
4696 and use BFD_MACHINES instead of DIS_LIBS.
4697 * configure.in: Set BFD_MACHINES based on --with-targets option.
4699 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4701 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4704 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4706 * sparc-opc.c: Change CONST to const to deal with gcc
4707 -Dconst=__const -traditional.
4709 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4711 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4712 coprocessor instructions out of #if 0, and made them use new
4715 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4717 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4719 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4721 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4722 instruction, for use by the disassembler.
4724 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4725 hand-coded sign extensions that depended on 32-bit host ints.
4726 FIXME, we still depend on big-endian host bitfield ordering.
4727 (sparc_print_insn): Set the insn_info_valid field, and the
4728 other fields that describe the instruction being printed.
4730 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4732 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4733 `jmp' instead of just one of them.
4735 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4737 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4738 (fput_fp_reg_r): Renamed from fput_reg_r.
4739 (fput_fp_reg): New function.
4740 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4742 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4744 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4746 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4748 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4750 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4751 don't output a space.
4753 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4755 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4757 * mips-opc.c: New file, containing opcode table from
4758 ../include/opcode/mips.h.
4759 * Makefile.in: Add it.
4761 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4763 * m88k-dis.c: New file, moved in from gdb and changed to use the
4764 new dis-asm.h disassembler interface.
4765 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4766 (m88k-dis.o): New target.
4768 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4770 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4771 argument string const char * to correspond to opcode/mips.h.
4773 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4775 * mips-dis.c: Updated to account for name changes in new version
4777 * Makefile.in: Added header file dependencies.
4779 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4781 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4783 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4785 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4786 extend, rather than shifts.
4788 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4790 * Makefile.in: Undo 15 June change.
4792 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4794 * m68k-dis.c (print_insn_arg): Change return value to byte count
4796 * m68k-dis.c: Re-write to detect invalid operands before
4797 printing anything, so we can handle this the same way we
4798 handle invalid opcodes.
4800 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4802 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4804 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4806 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4809 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4811 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4813 * configure.in: Do make sysdep.h link.
4814 * Makefile.in: Search ../include. Don't search ../bfd.
4816 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4818 Changes from Jeff Law, law@cs.utah.edu:
4819 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4820 Do not print a space before the completers specified by
4823 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4825 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4826 defined, since gdb has been fixed.
4828 Changes from Jeff Law, law@cs.utah.edu:
4829 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4830 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4831 be a *disassemble_info, not a *FILE.
4832 * hppa-dis.c: Support 'd', '!', and 'a'.
4833 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4834 * hppa-dis.c: Delete cases which are no longer needed.
4836 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4838 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4840 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4842 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4845 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4847 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4848 * configure.in: No longer need to configure to get sysdep.h.
4850 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4852 * Patches from Jeffrey Law <law@cs.utah.edu>.
4853 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4854 templates for 1.1 FP computational instructions.
4856 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4858 * h8500-dis.c (print_insn_h8500): Address argument is type
4860 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4863 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4864 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4866 * sparc-dis.c (compare_opcodes): Move static declaration to
4869 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4871 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4872 instruction, remove unimp hack from 'l' argument.
4874 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4876 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4879 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4881 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4882 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4885 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4887 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4888 arrays of string pointers to 2-d arrays of chars, to save
4891 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4893 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4894 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4896 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4898 * hppa-dis.c: New file from Utah, adapted to new disassembler
4900 * Makefile.in: Include it.
4902 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4904 * sh-dis.c, sh-opc.h: New files.
4906 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4908 * alpha-dis.c, alpha-opc.h: New files.
4910 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4912 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4915 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4917 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4919 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4921 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4924 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4926 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4927 and double percent signs a few places.
4929 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4931 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4932 Use info->print_address_func not print_address.
4934 * dis-buf.c (generic_print_address): New function.
4936 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4938 * Makefile.in: Add sparc-dis.c.
4939 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4941 Add `add' instruction to the set that get checked
4942 for a preceding `sethi' in order to print an absolute address.
4943 * (print_insn): Disassembly prefers real instructions.
4944 (is_delayed_branch): Speed up.
4945 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4946 Still missing some float ops, and needs testing.
4947 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4948 F_ALIAS. Use printf, not fprintf, when not passing a file
4950 (compare_opcodes): Check that identical instructions have
4951 identical opcodes, complain otherwise.
4954 * Include reg_names.
4956 Use dis-asm.h/read_memory_func interface.
4958 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4960 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4961 deliberately return non-zero to setjmp from longjmp. Otherwise
4962 this code fails to compile.
4964 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4966 * m68k-dis.c: Fix prototype for fetch_arg().
4968 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4970 * dis-buf.c: New file, for new read_memory_func interface.
4971 Makefile.in (OFILES): Include it.
4972 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4973 Use new read_memory_func interface.
4975 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4977 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4978 * h8500-opc.h: Fix couple of opcodes.
4980 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4982 * Makefile.in: add dvi & installcheck targets
4984 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4986 * Makefile.in: Update for h8500-dis.c.
4988 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4990 * h8500-dis.c, h8500-opc.h: New files
4992 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4994 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4995 ../include/dis-asm.h.
4996 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4997 and ../gdb/m68k-pinsn.c).
4998 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4999 and ../gdb/i386-pinsn.c).
5000 * m68881-ext.c: New file. Moved definition of
5001 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5002 * Makefile.in: Adjust for new files.
5003 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5004 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5005 can be dis-assembled.
5007 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5009 * mips-dis.c (print_insn_arg): Now returns void.
5011 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5013 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5014 files that use the macros.
5016 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5018 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5019 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5020 (CFILES): Added mips-dis.c.
5022 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5024 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5025 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5027 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5029 * Makefile.in: Improve *clean rules.
5030 * configure.in: Allow a default host.
5032 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5034 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5035 files include other sysdep files
5037 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5039 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5041 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5043 * configure.in: For host support, use ../bfd/configure.host
5044 so it stays in sync with the ../bfd/hosts database.
5046 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5048 * configure.in: use cpu-vendor-os triple instead of nested cases
5050 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5052 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5053 *always* the wrong one.
5055 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5057 * z8kgen.c: added copyright info
5059 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5061 * z8k-dis.c (unparse_instr): prettier tabs
5062 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5064 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5066 * configure.in: Add ncr* configuration.
5067 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5068 picayune ANSI compilers happy.
5070 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5072 * configure.in (i386): Make i386 and i486 synonymous for now.
5073 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5075 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5077 * Makefile.in (install): Fix typo.
5079 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5081 * Makefile.in (make): Remove obsolete crud.
5082 (sparc-opc.o): Avoid Sun Make VPATH bug.
5084 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5086 * Makefile.in: since there are no SUBDIRS, remove rule and
5087 references of subdir_do.
5089 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5091 * Makefile.in (install): Get the library name right here too.
5092 Don't install bfd.h, since it's unrelated to this library. No
5093 subdirs to recurse into, either.
5094 (CFILES): The source file has a .c suffix, not .o.
5096 * sparc-opc.c: New file, moved from BFD.
5097 * Makefile.in (OFILES): Build it.
5099 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5101 * z8k-dis.c: fixed forward refferences of some declarations.
5103 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5105 * Makefile.in: get the name of the library right
5107 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5109 * z8k-dis.c: knows how to disassemble z8k stuff
5110 * z8k-opc.h: new file full of z8000 opcodes
5114 version-control: never