1 2002-02-20 Tom Rix <trix@redhat.com>
3 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
5 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
7 * s390-dis.c (init_disasm): Use renamed architecture defines.
9 2002-02-19 matthew green <mrg@redhat.com>
11 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
14 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
16 * po/tr.po: Updated translation.
18 2002-02-15 Richard Henderson <rth@redhat.com>
20 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
23 2002-02-15 Richard Henderson <rth@redhat.com>
25 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
28 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
30 * po/da.po: Updated translation.
32 2002-02-12 Graydon Hoare <graydon@redhat.com>
34 * cgen-asm.in (parse_insn_normal): Change call from
35 @arch@_cgen_parse_operand to cd->parse_operand, to
36 facilitate CGEN_ASM_INIT_HOOK doing useful work.
38 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
40 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
43 2002-02-11 Alan Modra <amodra@bigpond.net.au>
45 * Makefile.am: "make dep-am".
46 * Makefile.in: Regenerate.
47 * aclocal.m4: Regenerate.
48 * config.in: Regenerate.
49 * configure: Regenerate.
51 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
53 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
54 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
56 * configure: Regenerate.
58 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
60 * cgen-dis.c: Add prototypes for count_decodable_bits
61 and add_insn_to_hash_chain.
63 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
65 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
68 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
70 * or32-opc.c: Fix compile time warning messages.
71 * or32-dis.c: Fix compile time warning messages.
73 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
76 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
77 * sh64-opc.c: Regenerate.
78 2001-03-13 DJ Delorie <dj@redhat.com>
79 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
80 purpose is more obvious.
81 * sh64-opc.c (shmedia_table): Ditto.
82 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
83 (print_insn_shmedia): Ditto.
84 2001-03-12 DJ Delorie <dj@redhat.com>
85 * sh64-opc.c: Adjust comments to reflect reality: replace bits
86 3:0 with zeros (not "reserved"), replace "rrrrrr" with
87 "gggggg" for two-operand floating point opcodes. Remove
89 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
90 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
91 Correct printing of .byte:s. Return number of printed bytes or
93 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
94 to next four-byte-alignment if insn or data is not aligned.
95 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
96 * sh64-dis.c: Update comments and fix comment formatting.
97 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
98 Abort instead of setting length to 0.
99 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
100 crange_bsearch_cmpl, sh64_get_contents_type,
101 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
102 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
103 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
104 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
105 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
106 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
107 address with same prefix as SHcompact.
108 In the disassembler, use a .cranges section for linked executables.
109 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
110 and update for using structure in info->private_data.
111 (struct sh64_disassemble_info): New.
112 (is_shmedia_p): Delete.
113 (crange_qsort_cmpb): New function.
114 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
115 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
116 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
117 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
118 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
119 pair. Display addresses for linked executables only.
120 (print_insn_sh64x_media): Initialize info->private_data by calling
121 init_sh64_disasm_info.
122 (print_insn_sh64x): Ditto. Find out type of contents by calling
123 sh64_contents_type_disasm. Display data regions using ".long" and
124 ".byte" similar to unrecognized opcodes.
125 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
126 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
127 information in section flags before considering symbols. Don't
128 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
129 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
130 matching $target $canon_targets instead of looking at the
131 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
132 * configure: Regenerate.
133 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
134 * sh64-opc.c (shmedia_creg_table): New.
135 * sh64-opc.h (shmedia_creg_info): New type.
136 (shmedia_creg_table): Declare.
137 * sh64-dis.c (creg_name): New function.
138 (print_insn_shmedia): Use it.
139 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
140 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
141 print_insn_sh64l if little-endian.
142 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
143 (print_insn_sh64l): New.
144 (print_insn_sh64x): New.
145 (print_insn_sh64x_media): New.
146 (print_insn_sh64): Break out code to print_insn_sh64x and
147 print_insn_sh64x_media.
148 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
149 * sh64-opc.h: New file
150 * sh64-opc.c: New file
151 * sh64-dis.c: New file
152 * Makefile.am: Add sh64 targets.
153 (HFILES): Add sh64-opc.h.
154 (CFILES): Add sh64-opc.c and sh64-dis.c.
155 (ALL_MACHINES): Add sh64 files.
156 * Makefile.in: Regenerate.
157 * configure.in: Add support for sh64 to bfd_sh_arch.
158 * configure: Regenerate.
159 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
160 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
162 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
163 * po/POTFILES.in: Regenerate.
164 * po/opcodes.pot: Regenerate.
166 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
168 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
170 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
172 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
174 2002-02-01 Alan Modra <amodra@bigpond.net.au>
176 * Makefile.am: Run "make dep-am"
177 * Makefile.in: Regenerate.
179 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
181 * or32-dis.c: New file.
182 * or32-opc.c: New file.
183 * configure.in: Add support for or32.
184 * configure: Regenerate.
185 * Makefile.am: Add support for or32.
186 * Makefile.in: Regenerate.
187 * disassemble.c: Add support for or32.
188 * po/POTFILES.in: Regenerate.
189 * po/opcodes.pot: Regenerate.
191 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
193 * configure: Regenerated.
195 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
197 * po/fr.po: Updated version.
199 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
201 * po/es.po: Updated version.
203 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
205 * po/da.po: New version.
207 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
209 * po/da.po: New file: Spanish translation.
210 * configure.in (ALL_LINGUAS): Add da.
211 * configure: Regenerate.
213 2002-01-22 Graydon Hoare <graydon@redhat.com>
215 * fr30-asm.c: Regenerate.
216 * fr30-desc.c: Likewise.
217 * fr30-desc.h: Likewise.
218 * fr30-dis.c: Likewise.
219 * fr30-ibld.c: Likewise.
220 * fr30-opc.c: Likewise.
221 * fr30-opc.h: Likewise.
222 * m32r-asm.c: Likewise.
223 * m32r-desc.c: Likewise.
224 * m32r-desc.h: Likewise.
225 * m32r-dis.c: Likewise.
226 * m32r-ibld.c: Likewise.
227 * m32r-opc.c: Likewise.
228 * m32r-opc.h: Likewise.
229 * m32r-opinst.c: Likewise.
230 * openrisc-asm.c: Likewise.
231 * openrisc-desc.c: Likewise.
232 * openrisc-desc.h: Likewise.
233 * openrisc-dis.c: Likewise.
234 * openrisc-ibld.c: Likewise.
235 * openrisc-opc.c: Likewise.
236 * openrisc-opc.h: Likewise.
237 * xstormy16-desc.c: Likewise.
239 2002-01-22 Richard Henderson <rth@redhat.com>
241 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
244 2002-01-22 Alan Modra <amodra@bigpond.net.au>
246 * Makefile.am: Run "make dep-am".
247 * Makefile.in: Regenerate.
248 * opcodes/po/POTFILES.in: Regenerate.
250 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
252 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
253 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
255 2002-01-18 Keith Walker <keith.walker@arm.com>
257 * arm-opc.h (arm_opcodes): Add bxj instruction.
259 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
261 * po/opcodes.pot: Regenerate.
262 * po/fr.po: Regenerate.
263 * po/sv.po: Regenerate.
264 * po/tr.po: Regenerate.
266 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
268 * po/tr.po: Import new version.
270 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
272 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
273 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
276 2002-01-10 matthew green <mrg@redhat.com>
278 * xstormy16-asm.c: Regenerate.
279 * xstormy16-desc.c: Likewise.
280 * xstormy16-desc.h: Likewise.
281 * xstormy16-dis.c: Likewise.
282 * xstormy16-opc.c: Likewise.
283 * xstormy16-opc.h: Likewise.
285 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
287 * po/es.po: New file: Spanish translation.
288 * configure.in (ALL_LINGUAS): Add es.
289 * configure: Regenerate.
291 2001-12-31 Jeffrey A Law (law@redhat.com)
293 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
294 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
295 Always emit a space after 'H'.
297 2001-12-18 matthew green <mrg@redhat.com>
299 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
301 2001-12-17 Richard Henderson <rth@redhat.com>
303 * alpha-opc.c (unop): Encode with RB as $sp.
305 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
307 * Makefile.am: Add support for xstormy16.
308 * Makefile.in: Regenerate.
309 * configure.in: Add support for xstormy16.
310 * configure: Regenerate.
311 * disassemble.c: Add support for xstormy16.
312 * xstormy16-asm.c: New generated file.
313 * xstormy16-desc.c: New generated file.
314 * xstormy16-desc.h: New generated file.
315 * xstormy16-dis.c: New generated file.
316 * xstormy16-ibld.c: New generated file.
317 * xstormy16-opc.c: New generated file.
318 * xstormy16-opc.h: New generated file.
320 2001-12-06 Richard Henderson <rth@redhat.com>
322 * alpha-opc.c (alpha_opcodes): Add wh64en.
324 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
326 * d10v-opc.c (d10v_predefined_registers): Remove warnings
327 introduced in Nov 29's patch.
329 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
332 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
335 * d10v-opc.c (RSRC_NOSP): New macro.
336 (d10v_operands): Add it.
337 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
339 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
341 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
342 (RSRC_SP): New macro.
343 (d10v_operands): Add it.
344 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
346 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
348 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
349 Also, break out of the loop as soon as an instruction has been
352 2001-11-17 matthew green <mrg@redhat.com>
354 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
356 2001-11-15 Alan Modra <amodra@bigpond.net.au>
358 * po/POTFILES.in: Regenerate.
360 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
361 (insert_bat, extract_bat, insert_bba, extract_bba,
362 insert_bd, extract_bd, insert_bdm, extract_bdm,
363 insert_bdp, extract_bdp, valid_bo,
364 insert_bo, extract_bo, insert_boe, extract_boe,
365 insert_ds, extract_ds, insert_de, extract_de,
366 insert_des, extract_des, insert_li, extract_li,
367 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
368 insert_nb, extract_nb, insert_nsi, extract_nsi,
369 insert_ral, insert_ram, insert_ras,
370 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
371 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
372 (extract_bd, extract_bdm, extract_bdp,
373 extract_ds, extract_des,
374 extract_li, extract_nsi): Implement sign extension without conditional.
375 (insert_bdm, extract_bdm,
376 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
377 (extract_bdm, extract_bdp): Correct 32 bit validation.
378 (AT1_MASK, AT2_MASK): Define.
379 (BBOAT_MASK): Define.
380 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
381 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
382 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
383 (PPCCOM32, PPCCOM64): Define.
384 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
385 and add new patterns to implement 64 bit branches with hints. Move
386 booke instructions so they match before ppc64.
388 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
389 64 bit default targets, and parse "32" and "64" in options.
391 (print_insn_powerpc): Pass dialect to operand->extract.
393 2001-11-14 Dave Brolley <brolley@redhat.com>
395 * cgen-dis.c (count_decodable_bits): New function.
396 (add_insn_to_hash_chain): New function.
397 (hash_insn_array): Call add_insn_to_hash_chain.
398 (hash_insn_list): Call add_insn_to_hash_chain.
399 * m32r-dis.c: Regenerated.
400 * fr30-dis.c: Regenerated.
402 2001-11-14 Andreas Jaeger <aj@suse.de>
404 * i386-dis.c (print_insn): Use x86-64 as option.
406 2001-11-14 Alan Modra <amodra@bigpond.net.au>
408 * disassemble.c (disassembler): Call print_insn_i386.
409 * i386-dis.c (SUFFIX_ALWAYS): Define.
410 (struct dis_private): Add orig_sizeflag.
411 (print_insn_i386): Make it a wrapper, calling..
412 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
413 warning without using volatile by moving orig_sizeflag to priv,
414 and removing inbuf. Parse disassembler_options.
415 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
417 (putop): Remove #ifdef SUFFIX_ALWAYS.
419 2001-11-11 Timothy Wall <twall@alum.mit.edu>
421 * tic54x-dis.c: Use revised opcode structure. Export opcode
423 (has_lkaddr): Don't forget about Lmem insns.
424 * tic54x-opc.c: Add emulation trap. Parallel table now uses
425 standard opcode templates.
427 2001-11-13 Zack Weinberg <zack@codesourcery.com>
429 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
430 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
431 category instead of Ew.
433 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
435 * m68k-opc.c: Fix definitions of wddata[bwl].
437 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
439 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
440 fit in the buffer, try to match the empty keyword.
442 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
444 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
445 * fr30-ibld.c: Regenerate.
446 * m32r-ibld.c: Regenerate.
447 * openrisc-ibld.c: Regenerate.
449 2001-11-04 Chris Demetriou <cgd@broadcom.com>
451 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
453 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
455 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
456 * configure: Regernate.
457 * po/fr.po: New file.
458 * po/sv.po: New file.
459 * po/tr.po: New file.
461 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
463 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
466 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
468 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
470 * Makefile.in: Regenerate.
471 * mmix-dis.c, mmix-opc.c: New files.
473 2001-10-29 Kazu Hirata <kazu@hxi.com>
475 * d30v-dis.c: Fix a comment typo.
477 2001-10-23 Chris Demetriou <cgd@broadcom.com>
479 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
480 "bltzall" as writing GPR 31 (since they do).
482 * mips-dis.c (print_insn_arg): Calculate info->target
484 (print_insn_mips): Fill in instruction info.
485 (print_mips16_insn_arg): Remove unneded variable 'val'.
486 Removed duplicated instruction target calculations,
487 calculate once and print that result. Use same idiom for
488 masking the jump segment bits as is used in print_insn_arg.
490 2001-10-20 Alan Modra <amodra@bigpond.net.au>
492 * ppc-opc.c (CT): Make it an optional operand.
494 2001-10-17 Chris Demetriou <cgd@broadcom.com>
496 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
497 SB-1 binaries include instructions specific to the SB-1.
498 * mips-opc.c (SB1): New definition.
499 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
500 "recip.ps", "rsqrt.ps", and "sqrt.ps".
502 2001-10-17 matthew green <mrg@redhat.com>
504 * ppc-opc.c (STRM): New AltiVec operand.
505 (XDSS): New AltiVec instruction form.
506 (mtvscr): Correct operand list.
507 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
509 2001-10-17 Alan Modra <amodra@bigpond.net.au>
511 * po/POTFILES.in: Regenerate.
513 2001-10-13 matthew green <mrg@redhat.com>
515 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
516 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
517 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
519 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
521 * cgen-ibld.in: Include safe-ctype.h in preference to
523 * cgen-asm.in: Include safe-ctype.h in preference to
524 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
525 TOLOWER instead of tolower.
526 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
527 string elements in constructed regular expression.
528 * fr30-asm.c: Regenerate.
529 * fr30-desc.c: Regenerate.
530 * fr30-ibld.c: Regenerate.
531 * m32r-asm.c: Regenerate.
532 * m32r-desc.c: Regenerate.
533 * m32r-ibld.c: Regenerate.
534 * openrisc-asm.c: Regenerate.
535 * openrisc-desc.c: Regenerate.
536 * openrisc-ibld.c: Regenerate.
537 * po/opcodes.pot: Regenerate.
539 2001-10-12 matthew green <mrg@redhat.com>
541 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
542 instruction field instruction/extraction functions for new BookE
543 DE form instructions.
544 (CT): New macro for CT field in an X form instruction.
545 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
547 (PPC64): Don't include PPC_OPCODE_PPC.
548 (403): New opcode macro for PPC403 processors.
549 (BOOKE): New opcode macro for BookE processors.
550 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
551 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
552 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
553 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
554 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
555 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
556 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
557 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
558 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
559 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
560 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
561 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
562 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
563 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
565 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
566 for a disassembler option of `booke', `booke32' or `booke64' to enable
567 BookE support in the disassembler.
569 2001-10-12 John Healy <jhealy@redhat.com>
571 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
572 for the length when extracting the base part of the insn.
574 2001-10-09 Bruno Haible <haible@clisp.cons.org>
576 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
577 regular expression. Fix some formatting problems.
578 * fr30-asm.c: Regenerate.
579 * openrisc-asm.c: Regenerate.
580 * m32r-asm.c: Regenerate.
582 2001-10-09 Christian Groessler <cpg@aladdin.de>
584 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
585 of indirect register memory accesses to be same format the
588 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
590 * sh-opc.h: Fix encoding of least significant nibble of the
591 DSP single data transfer instructions.
593 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
596 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
598 * cgen-asm.in: Fix compile time warning messages in generated
600 * cgen-dis.in: The same.
601 * cgen-ibld.in: The same.
602 * fr30-asm.c: Regenerate.
603 * fr30-desc.c: Regenerate.
604 * fr30-dis.c: Regenerate.
605 * fr30-ibld.c: Regenerate.
606 * fr30-opc.c: Regenerate.
607 * m32r-asm.c: Regenerate.
608 * m32r-desc.c: Regenerate.
609 * m32r-dis.c: Regenerate.
610 * m32r-ibld.c: Regenerate.
611 * m32r-opc.c: Regenerate.
612 * m32r-opinst.c Regenerate.
613 * openrisc-asm.c: Regenerate.
614 * openrisc-desc.c: Regenerate.
615 * openrisc-dis.c: Regenerate.
616 * openrisc-ibld.c: Regenerate.
617 * openrisc-opc.c: Regenerate.
618 * openrisc-opc.h: Regenerate.
619 * Makefile.in: Regenerate.
620 * po/POTFILES.in: Regenerate.
621 * po/opcodes.pot: Regenerate.
623 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
625 * arm-opc.h (arm_opcodes): Add cirrus insns.
627 * arm-dis.c (print_insn_arm): Add 'I' case.
629 2001-10-03 Alan Modra <amodra@bigpond.net.au>
631 * po/POTFILES.in: Regenerate.
632 * configure: Regenerate.
634 2001-10-02 Alan Modra <amodra@bigpond.net.au>
636 * Makefile.am (Makefile): Depend on bfd/configure.in.
638 * Makefile.in: Regenerate.
640 2001-09-30 John Healy <jhealy@redhat.com>
642 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
643 calls to cgen_get_insn_value and cgen_put_insn_value calls.
644 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
646 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
648 * Makefile.am: Update dependencies with "make dep-am".
649 * Makefile.in: Regenerate.
651 2001-09-26 Alan Modra <amodra@bigpond.net.au>
653 * arc-dis.c: Formatting fixes.
654 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
656 2001-09-21 Bruno Haible <haible@clisp.cons.org>
658 * arc-dis.c: Don't include <ctype.h>.
659 * openrisc-desc.c: Likewise.
660 * openrisc-ibld.c: Likewise.
662 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
664 * fr30-opc.c: Fix compile time warning messages.
665 * i370-opc.c: Fix compile time warning messages.
666 * i960-dis.c: Fix compile time warning messages.
667 * m32r-asm.c: Fix compile time warning messages.
668 * m32r-desc.c: Fix compile time warning messages.
669 * m32r-dis.c: Fix compile time warning messages.
670 * m32r-ibld.c: Fix compile time warning messages.
671 * m32r-opc.c: Fix compile time warning messages.
672 * m32r-opinst.c: Fix compile time warning messages.
673 * ns32k-dis.c: Fix compile time warning messages.
674 * openrisc-asm.c: Fix compile time warning messages.
675 * openrisc-desc.c: Fix compile time warning messages.
676 * openrisc-dis.c: Fix compile time warning messages.
677 * openrisc-ibld.c: Fix compile time warning messages.
678 * openrisc-opc.c: Fix compile time warning messages.
679 * pdp11-dis.c: Fix compile time warning messages.
680 * tic54x-dis.c: Fix compile time warning messages.
681 * v850-opc.c: Fix compile time warning messages.
682 * vax-dis.c: Fix compile time warning messages.
683 * w65-opc.h: Fix compile time warning messages.
684 * z8k-opc.h: Fix compile time warning messages.
685 * z8kgen.c: Fix compile time warning messages.
687 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
689 * arm-dis.c: Fix compile time warning messages.
690 * cgen-asm.c: Fix compile time warning messages.
691 * cgen-dis.c: Fix compile time warning messages.
692 * cris-dis.c: Fix compile time warning messages.
693 * d10v-dis.c: Fix compile time warning messages.
694 * fr30-asm.c: Fix compile time warning messages.
695 * fr30-desc.c: Fix compile time warning messages.
696 * fr30-dis.c: Fix compile time warning messages.
697 * fr30-ibld.c: Fix compile time warning messages.
699 2001-09-18 Bruno Haible <haible@clisp.cons.org>
701 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
702 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
703 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
704 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
706 (cgen_keyword_add): Use ISALNUM instead of isalnum.
707 (hash_keyword_name): Use TOLOWER instead of tolower.
708 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
709 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
711 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
712 * fr30-desc.c: Don't include <ctype.h>.
713 * fr30-ibld.c: Likewise.
714 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
715 (load_insn_classes, parse_resource_users, load_depfile): Use
716 ISSPACE instead of isspace.
717 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
718 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
720 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
721 * m32r-desc.c: Don't include <ctype.h>.
722 * m32r-ibld.c: Likewise.
723 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
724 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
726 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
728 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
730 * Makefile.am: Add rules and dependencies to create the s/390 opcode
731 table out of s390-opc.txt automatically.
732 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
733 * s390-mkopc.c (dumpTable): Change output to create a complete file.
734 * s390-opc.c: New improved opcode format macros and remove the
735 pregenerated opcode table.
736 * s390-opc.txt: Adapt to new improved opcode format macros.
738 2001-09-14 David Schleef <ds@schleef.org>
740 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
742 2001-09-04 Alan Modra <amodra@bigpond.net.au>
744 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
745 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
747 2001-08-31 Eric Christopher <echristo@redhat.com>
748 Jason Eckhardt <jle@redhat.com>
750 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
751 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
754 2001-08-31 Andreas Jaeger <aj@suse.de>
756 * tic54x-opc.c: Add default initializers to avoid warnings.
758 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
759 * arc-ext.c: Likewise.
761 2001-08-28 matthew gren <mrg@redhat.com>
763 * ppc-opc.c (icbt): Order correctly.
765 2001-08-27 David Edelsohn <dje@watson.ibm.com>
766 Torbjorn Granlund <tege@swox.com>
768 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
770 (insert_ds): Complain if not a multiple of 4.
772 (XSYNC_MASK): Define.
773 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
774 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
776 2001-08-26 Andreas Jaeger <aj@suse.de>
778 * h8500-opc.h: Add default initializers to h8500_table to shut up
781 2001-08-25 Andreas Jaeger <aj@suse.de>
783 * tic54x-dis.c: Add unused attributes where needed.
785 * z8k-dis.c (output_instr): Add unused attribute.
787 * h8300-dis.c: Add missing prototypes.
788 (bfd_h8_disassemble): Make static.
790 * cris-dis.c: Add missing prototype.
791 * h8500-dis.c: Likewise.
792 * m68hc11-dis.c: Likewise.
793 * pj-dis.c: Likewise.
794 * tic54x-dis.c: Likewise.
795 * v850-dis.c: Likewise.
796 * vax-dis.c: Likewise.
797 * w65-dis.c: Likewise.
798 * z8k-dis.c: Likewise.
800 * d10v-dis.c: Add missing prototype.
801 (dis_long): Remove unused variable.
802 (dis_2_short): Likewise.
804 * sh-dis.c: Add missing prototypes.
805 * v850-opc.c: Likewise.
806 Add unused attributes where needed.
808 * ns32k-dis.c: Add missing prototypes.
809 (bit_extract_simple): Remove unused variable.
811 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
813 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
814 branch instructions for gcc 3.0.
815 * opcodes/s390-opc.txt: Likewise.
817 2001-08-21 Andreas Jaeger <aj@suse.de>
819 * i960-dis.c: Add parameters for prototypes
820 (ctrl): Add unused attributes.
824 * mips-dis.c: Add missing prototypes.
825 * a29k-dis.c: Likewise.
826 * arc-dis.c: Likewise.
827 * ia64-opc.c: Likewise.
829 * s390-dis.c: Add missing prototypes.
830 (init_disasm): Remove unused attribute since the parameter is
833 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
835 * mips-opc.c (M1): Define. Reformatted Code.
836 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
839 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
841 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
842 the corresponding non-likely insn is in MIPS I.
844 2001-08-13 Kazu Hirata <kazu@hxi.com>
846 * mcore-dis.c: Fix formatting.
847 * mips-dis.c: Likewise.
848 * pj-dis.c: Likewise.
849 * z8k-dis.c: Likewise.
851 2001-08-12 Richard Henderson <rth@redhat.com>
853 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
854 to *VALUEP. Regenerate all cgen files.
856 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
858 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
860 * mips-opc.c (G6): Undefine.
861 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
862 as the first "move" alternative.
864 2001-08-10 Andreas Jaeger <aj@suse.de>
866 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
868 * configure: Regenerate.
870 2001-08-10 Alan Modra <amodra@bigpond.net.au>
872 * ppc-opc.c: Revert 2001-08-08.
874 2001-08-09 Alan Modra <amodra@bigpond.net.au>
876 * dis-buf.c (generic_strcat_address): Add missing prototype.
877 #if 0 the functions as it is unused.
879 2001-08-08 Alan Modra <amodra@bigpond.net.au>
881 1999-10-25 Torbjorn Granlund <tege@swox.com>
882 * ppc-opc.c: Include "bfd.h".
883 (powerpc_operands): Add new field for reloc type.
885 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
887 * mips-dis.c (print_insn_arg): Don't use software integer registers
888 for coprocessor registers.
889 (get_mips_isa): Removed.
890 (is_newabi): New function, checks if NewABI is used.
891 (_print_insn_mips): Get distinction between old ABI and new ABI right.
893 2001-08-01 Christian Groessler <cpg@aladdin.de>
895 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
896 get stderr definition.
897 (internal, gas): Removed warnings.
898 (gas): Create a correct final entry for created array.
899 * z8k-opc.h: Recreated with new z8kgen.
901 2001-07-28 Kazu Hirata <kazu@hxi.com>
903 * i386-dis.c: Fix formatting.
905 2001-07-28 Matthias Kramm <kramm@quiss.org>
907 * i386-dis.c: Change formatting conventions for architecture
908 i386:intel to better match the format of various intel i386
909 assemblers, like nasm, tasm or masm.
911 2001-07-24 Alan Modra <amodra@bigpond.net.au>
913 * Makefile.am: Update dependencies with "make dep-am".
914 * Makefile.in: Regenerate
916 2001-07-24 Kazu Hirata <kazu@hxi.com>
918 * alpha-dis.c: Fix formatting.
919 * cris-dis.c: Likewise.
920 * d10v-dis.c: Likewise.
921 * d30v-dis.c: Likewise.
922 * m10300-dis.c: Likewise.
923 * tic54x-dis.c: Likewise.
925 2001-07-23 Kazu Hirata <kazu@hxi.com>
927 * m68k-dis.c: Fix formatting.
928 * pj-dis.c: Likewise.
929 * s390-dis.c: Likewise.
930 * z8k-dis.c: Likewise.
932 2001-07-21 Chris Demetriou <cgd@broadcom.com>
934 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
935 into the rest of the surrounding definitions.
937 2001-07-18 Alan Modra <amodra@bigpond.net.au>
939 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
940 for lgdt, lidt, sgdt, sidt.
942 2001-07-13 Philip Blundell <philb@gnu.org>
944 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
946 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
948 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
950 (@arch@_cgen_build_insn_regex): New routine from Graydon.
951 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
952 to verify if it is worth parsing the insn as insn "x". Also update
953 error message when insn is not a recognized format of the insn vs
954 when the insn is completely unrecognized.
956 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
958 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
960 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
961 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
963 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
965 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
966 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
967 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
969 2001-07-05 Ben Elliston <bje@redhat.com>
971 * Makefile.am (CPUDIR): Define.
972 (stamp-m32r): Update dependencies.
974 (stamp-openrisc): Ditto.
975 * Makefile.in: Regenerate.
977 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
979 * ppc-opc.c: Fix encoding of 'clf' instruction.
981 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
983 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
985 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
987 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
988 * cgen-opc.c (cgen_keyword_add): Ignore special first
989 character when building nonalpha_chars field.
991 2001-06-24 Ben Elliston <bje@redhat.com>
993 * m88k-dis.c: Format to conform to GNU coding standards.
995 2001-06-23 Andreas Jaeger <aj@suse.de>
997 * disassemble.c (disassembler_usage): Add unused attribute.
999 2001-06-22 Eric Christopher <echristo@redhat.com>
1001 * mips-opc.c: Move prefx to start of the table.
1003 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1005 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1008 2001-06-22 Pauli <pauli@moreton.com.au>
1010 * m68k-opc.c: Add wdebug instruction.
1012 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1014 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1016 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1018 * cgen-asm.c (cgen_parse_keyword): When looking for the
1019 boundaries of a keyword, allow any special characters
1020 that are actually in one of the allowed keyword.
1021 * cgen-opc.c (cgen_keyword_add): Add any special characters
1022 to the nonalpha_chars field.
1024 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1026 * s390-opc.c: Add lgh instruction.
1027 * s390-opc.txt: Likewise.
1029 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1031 * i386-dis.c: Group function prototypes in one place.
1032 (FLOATCODE): Redefine as 1.
1033 (USE_GROUPS): Redefine as 2.
1034 (USE_PREFIX_USER_TABLE): Redefine as 3.
1035 (X86_64_SPECIAL): Define as 4.
1036 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1037 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1038 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1039 (dis386): New table combining above four tables.
1040 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1041 (dis386_twobyte): New table combining above two tables.
1042 (x86_64_table): New table to handle x86_64.
1044 (float_mem_att, float_mem_intel): Delet.
1045 (float_mem): New table combining above two tables.
1046 (print_insn_i386): Modify for above.
1047 (dofloat): Likewise.
1048 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1049 Return 0 on success, 1 if no valid alternative.
1050 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1051 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1052 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1053 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1055 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1056 (OP_I64): If not 64-bit mode, call OP_I.
1057 OP_OFF64): If not 64-bit mode, call OP_OFF.
1058 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1059 'ignore'/'ignored' to 'bytemode'.
1061 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1063 * configure.in: Sort 'ta' case statement.
1064 * configure: Regenerate.
1066 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1068 (disx86_64_att): Likewise.
1069 (dis386_twobyte_att): Likewise.
1070 (print_insn_i386): Don't print branch hints as a prefix.
1071 (putop): 'H' macro prints branch hints.
1072 (get64): Kill compile warnings.
1074 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1076 * sh-opc.h (sh_table): Don't use empty initializers.
1078 2001-06-06 Christian Groessler <cpg@aladdin.de>
1080 * z8k-dis.c: Fix formatting.
1081 (unpack_instr): Remove unused cases in switch statement. Add
1082 safety abort() in default case.
1083 (unparse_instr): Add safety abort() in default case.
1085 2001-06-06 Peter Jakubek <pjak@snafu.de>
1087 * m68k-dis.c (print_insn_m68k): Fix typo.
1088 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1089 mcf (ColdFire) div, rem and moveb instructions.
1091 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1093 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1094 (cond_jump_mode, loop_jcxz_mode): Define.
1095 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1096 appropriate, and 'F' suffix to loop insns.
1097 (disx86_64_att): Likewise.
1098 (dis386_twobyte_att): Likewise.
1099 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1100 Output data size prefix for long conditional jumps. Output cs and
1102 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1103 (OP_J): Don't make PREFIX_DATA used.
1105 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1107 * sh-opc.h (sh_table): Complete last element entry to avoid
1110 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1112 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1114 2001-05-23 Alan Modra <amodra@one.net.au>
1116 * arc-opc.c: Whitespace changes.
1118 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1120 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1123 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1125 * cgen-dis.in (extract_normal): Complete support for min<base case.
1127 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1129 * mips-dis.c (INSNLEN): Rename MAXLEN.
1130 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1131 (print_insn_arg): Remove $ prefix of register names.
1132 (set_mips_isa_type): Remove.
1133 (mips_isa_type): New function.
1134 (get_mips_isa): New Function.
1135 (print_insn_mips): Rename _print_insn_mips.
1136 (_print_insn_mips): New function, contains code which was
1137 duplicated in print_insn_big_mips and print_insn_little_mips.
1138 (print_insn_big_mips): Moved code to _print_insn_mips.
1139 (print_insn_little_mips): Likewise.
1140 (print_mips16_insn_arg): Remove $ prefix of register names.
1141 Print error message before abort.
1143 2001-05-14 J.T. Conklin <jtc@redback.com>
1145 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1146 simplified mnemonics used for setting PPC750-specific special
1149 2001-05-12 H.J. Lu <hjl@gnu.org>
1151 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1154 2001-05-12 Peter Targett <peter.targett@arccores.com>
1156 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1157 register to r/w. Formatting fixes throughout file.
1159 2001-05-12 Alan Modra <amodra@one.net.au>
1161 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1163 (twobyte_has_modrm): Update table.
1164 (need_modrm): Give it file scope.
1165 (MODRM_CHECK): Define.
1166 (dofloat): Use MODRM_CHECK.
1171 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1173 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1174 even at end of a section.
1175 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1176 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1178 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1180 * disassemble.c (disassembler_usage): Remove unused attribute.
1182 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1184 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1186 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1188 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1189 assume incoming buffer already has the base insn loaded. Handle
1190 smaller-than-base instructions for variable-length case.
1192 2001-05-04 Alan Modra <amodra@one.net.au>
1194 * i386-dis.c (Ev, Ed): Remove duplicate define.
1197 (OP_XS): New function.
1198 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1200 (dis386_twobyte_intel): Likewise.
1201 (prefix_user_table): Use MS for maskmovq operand.
1203 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1205 * Makefile.am: Add OpenRISC target.
1206 * Makefile.in: Regenerated.
1208 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1210 * configure.in (bfd_openrisc_arch): Add target.
1211 * configure: Regenerated.
1213 * openrisc-asm.c: New file.
1214 * openrisc-desc.c: Likewise.
1215 * openrisc-desc.h: Likewise.
1216 * openrisc-dis.c: Likewise.
1217 * openrisc-ibld.c: Likewise.
1218 * openrisc-opc.c: Likewise.
1219 * openrisc-opc.h: Likewise.
1221 2001-04-24 Christian Groessler <cpg@aladdin.de>
1223 * z8k-dis.c: add names of control registers (ctrl_names);
1224 (seg_length): provides instruction length fixup for segmented
1225 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1226 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1227 (unparse_intr): handle CLASS_PR, print addresses without '#'
1228 * z8k-opc.h: re-created with new z8kgen
1229 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1230 entries for ldctl/ldctlb instruction
1232 2001-04-06 Andreas Jaeger <aj@suse.de>
1234 * i386-dis.c: Add ffreep instruction.
1236 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1238 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1240 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1242 * i386-dis.c (PREGRP25): Define.
1243 (dis386_twobyte_att): Use here in place of "movntq" entry.
1244 (dis386_twobyte_intel): Likewise.
1245 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1247 (dis386_twobyte_att): Use here.
1248 (dis386_twobyte_intel): Likewise.
1249 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1250 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1251 (prefix_user_table): Cosmetic changes to "bad" entries.
1253 2001-03-23 Nick Clifton <nickc@redhat.com>
1255 * mips-opc.c: Remove extraneous whitespace.
1256 * mips-dis.c: Remove extraneous whitespace.
1258 2001-03-22 Ben Elliston <bje@redhat.com>
1260 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1261 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1262 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1263 to allay a compiler warning.
1265 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1267 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1268 (dis386_twobyte_intel): Likewise.
1269 (twobyte_has_modrm): Set entry for paddq, psubq.
1271 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1273 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1274 determination via CGEN_COMPUTE_MACH.
1275 * fr30-desc.c: Regenerate.
1276 * fr30-dis.c: Regenerate.
1277 * fr30-opc.h: Regenerate.
1278 * m32r-desc.c: Regenerate.
1279 * m32r-dis.c: Regenerate.
1280 * m32r-opc.h: Regenerate.
1281 * m32r-opinst.c: Regenerate.
1283 2001-03-20 H.J. Lu <hjl@gnu.org>
1285 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1286 * configure: Rebuild.
1288 2001-03-19 Jim Wilson <wilson@redhat.com>
1290 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1291 notestr if larger than xsect.
1292 (in_class): Handle format M5.
1293 * ia64-asmtab.c: Regnerate.
1295 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1297 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1298 has more than one byte left to read.
1300 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1302 * s390-opc.c: Add new opcodes. Smooth out formatting.
1303 * s390-opc.txt: Add new opcodes.
1305 2001-03-06 Nick Clifton <nickc@redhat.com>
1307 * arm-dis.c (print_insn_thumb): Compute destination address
1308 of BLX(1) instruction by taking bit 1 from PC and not from bit
1311 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1313 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1314 so command line switches will work.
1316 2001-03-05 Dave Brolley <brolley@redhat.com>
1318 * fr30-asm.c: Regenerate.
1319 * fr30-desc.c: Regenerate.
1320 * fr30-desc.h: Regenerate.
1321 * fr30-dis.c: Regenerate.
1322 * fr30-ibld.c: Regenerate.
1323 * fr30-opc.c: Regenerate.
1324 * fr30-opc.h: Regenerate.
1325 * m32r-asm.c: Regenerate.
1326 * m32r-desc.c: Regenerate.
1327 * m32r-desc.h: Regenerate.
1328 * m32r-dis.c: Regenerate.
1329 * m32r-ibld.c: Regenerate.
1330 * m32r-opc.c: Regenerate.
1331 * m32r-opc.h: Regenerate.
1332 * m32r-opinst.c: Regenerate.
1334 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1336 * m68k-opc.c: fix cpushl according to Motorola. Enable
1337 bunch of instructions for Coldfire 5407 and add all new.
1339 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1341 * configure.in (BFD_VERSION): Do without grep.
1342 * configure: Regenerate.
1343 * Makefile.am: Run "make dep-am".
1344 * Makefile.in: Regenerate.
1346 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1348 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1349 * ia64-asmtab.c: Regenerate.
1351 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1353 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1354 separate variants: one for IMM22 and the other for IMM14.
1355 * ia64-asmtab.c: Regenerate.
1357 2001-02-21 Greg McGary <greg@mcgary.org>
1359 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1361 2001-02-20 H.J. Lu <hjl@gnu.org>
1363 * Makefile.am (ia64-ic.tbl): Remove the target.
1364 (ia64-raw.tbl): Likewise.
1365 (ia64-waw.tbl): Likewise.
1366 (ia64-war.tbl): Likewise.
1367 (ia64-asmtab.c): Generate it in the source directory.
1368 * Makefile.in: Regenerated.
1370 2001-02-18 lars brinkhoff <lars@nocrew.org>
1372 * Makefile.am: Add PDP-11 target.
1373 * configure.in: Likewise.
1374 * disassemble.c: Likewise.
1375 * pdp11-dis.c: New file.
1376 * pdp11-opc.c: New file.
1378 2001-02-14 Jim Wilson <wilson@redhat.com>
1380 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1381 * ia64-asmtab.c: Regenerate.
1383 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1385 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1389 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1391 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1392 the following instruction not of the jump itself for the jump
1394 (print_mips16_insn_arg): Likewise.
1396 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1398 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1400 * Makefile.in: Regenerate.
1402 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1404 * Makefile.am: Add linux target for S/390.
1405 * Makefile.in: Likewise.
1406 * configure.in: Likewise.
1407 * disassemble.c: Likewise.
1408 * s390-dis.c: New file.
1409 * s390-mkopc.c: New file.
1410 * s390-opc.c: New file.
1411 * s390-opc.txt: New file.
1413 2001-02-05 Jim Wilson <wilson@redhat.com>
1415 * ia64-asmtab.c: Revert 2000-12-16 change.
1417 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1419 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1420 * m32r-desc.h: Regenerate.
1422 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1424 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1425 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1427 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1429 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1431 2001-01-13 Nick Clifton <nickc@redhat.com>
1433 * disassemble.c: Remove spurious white space.
1435 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1437 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1440 2001-01-11 Peter Targett <peter.targett@arccores.com>
1442 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1443 * Makefile.am (C_FILES): Add arc-ext.c.
1444 (ALL_MACHINES) Add arc-ext.lo.
1445 (INCLUDES) Add opcode directory to list.
1446 New dependency entry for arc-ext.lo.
1447 * disassemble.c (disassembler): Correct call to
1448 arc_get_disassembler.
1449 * arc-opc.c: New update for ARC, including full base
1450 instructions for ARC variants.
1451 * arc-dis.h, arc-dis.c: New update for ARC, including
1452 extensibility functionality.
1453 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1455 2001-01-10 Jan Hubicka <jh@suse.cz>
1457 * i386-dis.c (PREGRP15 - PREGRP24): New.
1458 (dis386_twobyt): Add SSE2 instructions.
1459 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1460 (twobyte_uses_f3_prefix): ... this one.
1461 (grps): Add SSE instructions.
1462 (prefix_user_table): Add two new slots; add SSE2 instructions.
1463 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1464 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1465 to prefix_user_table.
1466 (OP_E): Accept mfence and lfence as well.
1467 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1468 (OP_XMM): Support REX extensions.
1472 2001-01-09 Nick Clifton <nickc@redhat.com>
1474 * arm-dis.c (print_insn): Set pc to zero for instructions with
1475 a reloc associated with them.
1477 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1479 * cgen-asm.in (parse_insn_normal): Changed syn to be
1480 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1481 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1482 to '\0' to use 0 instead.
1483 * cgen-dis.in (print_insn_normal): Ditto.
1484 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1486 2001-01-05 Jan Hubicka <jh@suse.cz>
1488 * i386-dis.c: Add x86_64 support.
1489 (rex): New static variable.
1490 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1491 (USED_REX): New macro.
1492 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1493 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1494 (OP_REG, OP_OFF): Declare.
1495 (get64, get32, get32s): New functions.
1496 (r??_reg): New constants.
1497 (dis386_att): Change templates of instruction implicitly promoted
1498 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1500 (dis386_intel): Likewise.
1501 (dixx86_64_att): New table based on dis386_att.
1502 (dixx86_64_intel): New table based on dis386_intel.
1503 (names64, names8rex): New global variable.
1504 (names32, names16): Add extended registers.
1505 (prefix_user_t): Recognize rex prefixes.
1506 (prefix_name): Print REX prefixes nicely.
1507 (op_riprel): New global variable.
1508 (start_pc): Set type to bfd_vma.
1509 (print_insn_i386): Detect the 64bit mode and use proper table;
1510 move ckprefix after initializing the buffer; output unused rex prefixes;
1511 output information about target of RIP relative addresses.
1512 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1513 (print_operand_value): New function.
1514 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1515 REX prefix and new modes.
1516 (get64, get32s): New.
1517 (get32): Return bfd_signed_vma type.
1518 (set_op): Initialize the op_riprel.
1519 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1521 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1523 cgen-dis.in (read_insn): Use bfd_get_bits()
1525 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1527 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1528 (hash_insn_list): Likewise
1529 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1530 (extract_1): Use bfd_get_bits().
1531 (extract_normal): Apply sign extension to both extraction
1533 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1534 (cgen_put_insn_value): Use bfd_put_bits()
1536 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1538 * cgen-asm.in (parse_insn_normal): Print better error message for
1539 instructions with missing operands.
1541 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1543 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1545 2000-12-16 Nick Clifton <nickc@redhat.com>
1547 * Makefile.in: Regenerate.
1548 * aclocal.m4: Regenerate.
1549 * config.in: Regenerate.
1550 * configure.in: Add spacing.
1551 * configure: Regenerate.
1552 * ia64-asmtab.c: Regenerate.
1553 * po/opcodes.pot: Regenerate.
1555 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1557 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1558 error messages over later parse-time ones.
1560 2000-12-12 Jim Wilson <wilson@redhat.com>
1562 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1564 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1565 (print_dependency_table): Print NULL if semantics field not set.
1566 (insert_opcode_dependencies): Mark cmp parameter as unused.
1567 (print_main_table): Use fprintf_vma to print long long fields.
1568 (main): Mark argv paramter as unused. Convert to old style definition.
1569 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1570 * ia64-asmtab.c: Regnerate.
1572 2000-12-09 Nick Clifton <nickc@redhat.com>
1574 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1577 * fr30-dis.c: Regenerate.
1579 2000-12-08 Peter Targett <peter.targett@arccores.com>
1581 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1582 * Makefile.am (C_FILES): Add arc-ext.c.
1583 (ALL_MACHINES) Add arc-ext.lo.
1584 (INCLUDES) Add opcode directory to list.
1585 New dependency entry for arc-ext.lo.
1586 * disassemble.c (disassembler): Correct call to
1587 arc_get_disassembler.
1588 * arc-opc.c: New update for ARC, including full base
1589 instructions for ARC variants.
1590 * arc-dis.h, arc-dis.c: New update for ARC, including
1591 extensibility functionality.
1592 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1594 2000-12-03 Chris Demetriou cgd@sibyte.com
1596 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1597 MOD_HILO, and MOD_LO macros.
1599 * mips-opc.c (M1, M2): Delete.
1600 (mips_builtin_opcodes): Remove all uses of M1.
1602 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1603 instructions take "G" format second operands and use the
1605 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1607 Delete "sel" code operands from mfc1 and mtc1.
1608 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1611 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1612 Chris Demetriou cgd@sibyte.com
1614 * mips-opc.c (mips_builtin_opcodes): Finish additions
1615 for MIPS32 support, and clean up existing entries for
1616 aesthetics, consistency with the MIPS32 ISA, and
1617 with consistency the rest of the table.
1619 2000-12-01 Nick Clifton <nickc@redhat.com>
1621 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1624 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1626 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1627 specifiers. Update 'B' for new constant names, and remove
1629 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1630 near the top of the array, so they are disassembled properly.
1631 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1632 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1633 specifier. Add 'H' format specifier variants for "mfc1,"
1634 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1635 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1636 "wait" variant which uses 'J' operand specifier.
1638 * mips-dis.c (set_mips_isa_type): Update to use
1639 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1640 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1641 * mips-opc.c (I32): New constant for instructions added in
1644 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1646 * mips-dis.c (set_mips_isa_type): Add cases for
1647 bfd_mach_mips5 and bfd_mach_mips64.
1648 * mips-opc.c (I64): New definitions.
1650 * mips-dis.c (set_mips_isa_type): Add case for
1653 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1655 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1656 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1657 Initialize variable dc to NULL.
1658 (print_insn_shx): Remove unused label d_reg_n.
1660 2000-11-24 Nick Clifton <nickc@redhat.com>
1662 * arm-opc.h: Add new opcode formatting parameter 'B'.
1663 (arm_opcodes): Add XScale, v5, and v5te instructions.
1664 (thumb_opcodes): Add v5t instructions.
1666 * arm-dis.c (print_insn_arm): Handle new 'B' format
1668 (print_insn_thumb): Decode BLX(1) instruction.
1670 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1672 * mips-opc.c: Fix file header comment.
1674 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1676 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1677 print_insn_cris_with_register_prefix.
1679 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1681 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1683 2000-11-07 Matthew Green <mrg@redhat.com>
1685 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1686 must be loaded there in their entirety.
1688 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1690 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1691 (compute_arch_mask): Add v8plusb and v9b machines.
1692 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1693 * sparc-opc.c: Support for Cheetah instruction set.
1694 (prefetch_table): Add #invalidate.
1696 2000-10-16 Nick Clifton <nickc@redhat.com>
1698 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1700 2000-10-06 Dave Brolley <brolley@redhat.com>
1702 * fr30-desc.h: Regenerate.
1703 * m32r-desc.h: Regenerate.
1704 * m32r-ibld.c: Regenerate.
1706 2000-10-05 Jim Wilson <wilson@redhat.com>
1708 * ia64-ic.tbl: Update from Intel.
1709 * ia64-asmtab.c: Regenerate.
1711 2000-10-04 Kazu Hirata <kazu@hxi.com>
1713 * ia64-gen.c: Convert C++-style comments to C-style comments.
1714 * tic54x-dis.c: Likewise.
1716 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1718 Changes to add dollar prefix to registers for files where user symbols
1719 don't have a leading underscore. Fix formatting.
1720 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1721 (format_reg): Add parameter with_reg_prefix. All callers changed.
1722 (print_with_operands): Ditto.
1723 (print_insn_cris_generic): Renamed from print_insn_cris, add
1724 parameter with_reg_prefix.
1725 (print_insn_cris_with_register_prefix,
1726 print_insn_cris_without_register_prefix, cris_get_disassembler):
1728 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1730 2000-09-22 Jim Wilson <wilson@redhat.com>
1732 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1733 gt, ge, ngt, and nge.
1734 * ia64-asmtab.c: Regenerate.
1736 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1737 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1738 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1739 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1740 * ia64-asmtab.c: Regnerate.
1742 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1744 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1745 Add mfc0 and mtc0 with sub-selection values.
1746 Add clo and clz opcodes.
1747 Add msub and msubu instructions for MIPS32.
1748 Add madd/maddu aliases for mad/madu for MIPS32.
1749 Support wait, deret, eret, movn, pref for MIPS32.
1750 Support tlbp, tlbr, tlbwi, tlbwr.
1753 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1754 (print_insn_arg): Handle 'H' args.
1755 (set_mips_isa_type): Recognize 4K.
1756 Use CPU_* defines instead of hardcoded numbers.
1758 2000-09-11 Catherine Moore <clm@redhat.com>
1760 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1761 (d30v_format_tab): Use Rb2 for modinc and moddec.
1763 2000-09-07 Catherine Moore <clm@redhat.com>
1765 * d30v-opc.c (d30v_format_tab): Use format Ra for
1768 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1770 * configure: Rebuilt with new libtool.m4.
1772 2000-09-05 Nick Clifton <nickc@redhat.com>
1774 * configure: Regenerate.
1775 * po/opcodes.pot: Regenerate.
1777 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1779 * acinclude.m4: Include libtool and gettext macros from the
1781 * aclocal.m4, configure: Rebuilt.
1783 2000-08-30 Kazu Hirata <kazu@hxi.com>
1785 * tic80-dis.c: Fix formatting.
1787 2000-08-29 Kazu Hirata <kazu@hxi.com>
1789 * w65-dis.c: Fix formatting.
1791 2000-08-28 Mark Hatle <mhatle@mvista.com>
1793 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1794 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1795 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1796 instructions. Added extended mnemonic mftbl as defined in the
1797 405GP manual for all PPCs.
1799 2000-08-28 Jim Wilson <wilson@redhat.com>
1801 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1802 call. Change last goto to use failed instead of done.
1804 2000-08-28 Dave Brolley <brolley@redhat.com>
1806 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1807 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1808 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1809 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1810 * cgen-dis.in (read_insn): New static function.
1811 (print_insn): Use read_insn to read the insn into the buffer and set
1813 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1815 * fr30-asm.c: Regenerated.
1816 * fr30-desc.c: Regenerated.
1817 * fr30-desc.h: Regenerated.
1818 * fr30-dis.c: Regenerated.
1819 * fr30-ibld.c: Regenerated.
1820 * fr30-opc.c: Regenerated.
1821 * fr30-opc.h: Regenerated.
1822 * m32r-asm.c: Regenerated.
1823 * m32r-desc.c: Regenerated.
1824 * m32r-desc.h: Regenerated.
1825 * m32r-dis.c: Regenerated.
1826 * m32r-ibld.c: Regenerated.
1827 * m32r-opc.c: Regenerated.
1829 2000-08-28 Kazu Hirata <kazu@hxi.com>
1831 * tic30-dis.c: Fix formatting.
1833 2000-08-27 Kazu Hirata <kazu@hxi.com>
1835 * sh-dis.c: Fix formatting.
1837 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1839 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1841 2000-08-24 Kazu Hirata <kazu@hxi.com>
1843 * z8k-dis.c: Fix formatting.
1845 2000-08-16 Jim Wilson <wilson@redhat.com>
1847 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1848 break, mov-immediate, nop.
1849 * ia64-opc-f.c: Delete fpsub instructions.
1850 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1851 address operand. Rewrite using macros to avoid long lines.
1852 * ia64-opc.h (POSTINC): Define.
1853 * ia64-asmtab.c: Regenerate.
1855 2000-08-15 Jim Wilson <wilson@redhat.com>
1857 * ia64-ic.tbl: Add missing entries.
1859 2000-08-08 Jason Eckhardt <jle@redhat.com>
1861 * i860-dis.c (print_br_address): Change third argument from int
1864 2000-08-07 Richard Henderson <rth@redhat.com>
1866 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1867 for MLI templates. Handle IA64_OPND_TGT64.
1869 2000-08-04 Ben Elliston <bje@redhat.com>
1871 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1872 * cgen.sh: Likewise.
1874 2000-08-02 Jim Wilson <wilson@redhat.com>
1876 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1878 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1880 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1881 Change return type from void to int. Check the combination
1882 of operands, return 1 if valid. Fix to avoid BUF overflow.
1883 Report undefined combinations of operands in COMMENT.
1884 Report internal errors to stderr. Output the adiw/sbiw
1885 constant operand in both decimal and hex.
1886 (print_insn_avr): Disassemble ldd/std with displacement of 0
1887 as ld/st. Check avr_operand () return value, handle invalid
1888 combinations of operands like unknown opcodes.
1890 2000-07-28 Ben Elliston <bje@redhat.com>
1892 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1893 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1894 * Makefile.in: Regenerate.
1895 * configure.in: Add --enable-cgen-maint option.
1896 * configure: Regenerate.
1898 2000-07-26 Dave Brolley <brolley@redhat.com>
1900 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1901 (cgen_hw_lookup_by_num): Ditto.
1902 (cgen_operand_lookup_by_name): Ditto.
1903 (print_address): Ditto.
1904 (print_keyword): Ditto.
1905 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1907 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1909 (cgen_parse_keyword): Ditto.
1911 2000-07-22 Jason Eckhardt <jle@redhat.com>
1913 * i860-dis.c: New file.
1914 (print_insn_i860): New function.
1915 (print_br_address): New function.
1916 (sign_extend): New function.
1917 (BITWISE_OP): New macro.
1918 (I860_REG_PREFIX): New macro.
1919 (grnames, frnames, crnames): New structures.
1921 * disassemble.c (ARCH_i860): Define.
1922 (disassembler): Add check for bfd_arch_i860 to set disassemble
1923 function to print_insn_i860.
1925 * Makefile.in (CFILES): Added i860-dis.c.
1926 (ALL_MACHINES): Added i860-dis.lo.
1927 (i860-dis.lo): New dependences.
1929 * configure.in: New bits for bfd_i860_arch.
1931 * configure: Regenerated.
1933 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1935 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1936 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1937 (cris-dis.lo, cris-opc.lo): New rules.
1938 * Makefile.in: Rebuild.
1939 * configure.in (bfd_cris_arch): New target.
1940 * configure: Rebuild.
1941 * disassemble.c (ARCH_cris): Define.
1942 (disassembler): Support ARCH_cris.
1943 * cris-dis.c, cris-opc.c: New files.
1944 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1946 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1948 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1949 Reported by Bill Clarke <llib@computer.org>.
1951 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1953 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1954 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1956 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1958 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1959 fput_const, extract_3, extract_5_load, extract_5_store,
1960 extract_5r_store, extract_5R_store, extract_10U_store,
1961 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1962 extract_12, extract_17, extract_22): Prototype.
1963 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1964 shadowing outer block.
1967 2000-07-05 DJ Delorie <dj@redhat.com>
1971 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1973 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1975 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1977 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1978 marked for translation (exception from the usual coding style).
1979 (print_insn_avr): Initialize insn2 to avoid warnings.
1981 2000-07-03 Kazu Hirata <kazu@hxi.com>
1983 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1984 * h8500-dis.c: Fix formatting.
1986 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1988 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1989 (CLEANFILES): Add DEPA.
1990 * Makefile.in: Regenerate.
1992 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1994 * arm-dis.c (regnames): Add an additional register set to match
1995 the set used by GCC. Make it the default.
1997 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1999 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2001 * Makefile.in: Regenerate.
2003 2000-06-20 H.J. Lu <hjl@gnu.org>
2005 * Makefile.am: Rebuild dependency.
2006 * Makefile.in: Rebuild.
2008 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2010 * Makefile.in, configure: regenerate
2011 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2013 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2015 * configure.in: Recognize m68hc12 and m68hc11.
2016 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2017 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2018 and opcode generation for m68hc11 and m68hc12.
2020 2000-06-16 Nick Duffek <nsd@redhat.com>
2022 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2023 bfd_mach_ppc_620 instead of 620.
2025 2000-06-12 Kazu Hirata <kazu@hxi.com>
2027 * h8300-dis.c: Fix formatting.
2028 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2031 2000-06-09 Denis Chertykov <denisc@overta.ru>
2033 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2035 2000-06-07 Denis Chertykov <denisc@overta.ru>
2037 * avr-dis.c: completely rewritten.
2039 2000-06-02 Kazu Hirata <kazu@hxi.com>
2041 * h8300-dis.c: Follow the GNU coding style.
2042 (bfd_h8_disassemble) Fix a typo.
2044 2000-06-01 Kazu Hirata <kazu@hxi.com>
2046 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2047 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2048 correctly. Fix a typo.
2050 2000-05-31 Nick Clifton <nickc@redhat.com>
2052 * opintl.h (_(String)): Explain why dgettext is used instead of
2055 2000-05-30 Nick Clifton <nickc@redhat.com>
2057 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2058 bindtextdomain): Replace defines with those from intl/libgettext.h
2059 to quieten gcc warnings.
2061 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2063 * Makefile.am: Update dependencies with "make dep-am"
2064 * Makefile.in: Regenerate.
2066 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2068 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2069 sign-extending operands.
2071 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2073 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2076 2000-05-21 Nick Clifton <nickc@redhat.com>
2078 * Makefile.am (LIBIBERTY): Define.
2080 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2082 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2083 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2084 (reg_names): Rename to std_reg_names. Change it to a char **
2086 (std_reg_names): New name for reg_names.
2087 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2090 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2092 * fr30-desc.h: Partially regenerated to account for changed
2093 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2094 * m32r-desc.h: Ditto.
2096 2000-05-15 Nick Clifton <nickc@redhat.com>
2098 * arm-opc.h: Use upper case for flasg in MSR and MRS
2099 instructions. Allow any bit to be set in the field_mask of
2100 the MSR instruction.
2102 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2103 field_mask of an MSR instruction.
2105 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2107 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2108 instructions changed to ldrsb/ldrsh.
2110 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2112 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2113 target addresses for 'jal' and 'j'.
2115 2000-05-10 Geoff Keating <geoffk@redhat.com>
2117 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2118 also available in common mode when powerpc syntax is being used.
2120 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2122 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2123 (dummy_print_address): Ditto.
2125 2000-05-04 Timothy Wall <twall@redhat.com>
2127 * tic54x-opc.c: New.
2128 * tic54x-dis.c: New.
2129 * disassemble.c (disassembler): Add ARCH_tic54x.
2130 * configure.in: Added tic54x target.
2132 * Makefile.am: Add tic54x dependencies.
2133 * Makefile.in: Ditto.
2135 2000-05-03 J.T. Conklin <jtc@redback.com>
2137 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2138 vector unit operands.
2139 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2140 unit instruction formats.
2141 (PPCVEC): New macro, mask for vector instructions.
2142 (powerpc_operands): Add table entries for above operand types.
2143 (powerpc_opcodes): Add table entries for vector instructions.
2145 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2146 (print_insn_little_powerpc): Likewise.
2147 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2149 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2151 * configure.in: Add bfd_powerpc_64_arch.
2152 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2155 2000-04-24 Nick Clifton <nickc@redhat.com>
2157 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2160 2000-04-23 Denis Chertykov <denisc@overta.ru>
2162 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2164 (reg_fmul_r): New. Extract source register from FMUL instruction.
2165 (reg_muls_d): New. Extract destination register from MULS instruction.
2166 (reg_muls_r): New. Extract source register from MULS instruction.
2167 (reg_movw_d): New. Extract destination register from MOVW instruction.
2168 (reg_movw_r): New. Extract source register from MOVW instruction.
2169 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2170 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2172 2000-04-22 Timothy Wall <twall@redhat.com>
2174 * ia64-gen.c (general): Add an ordered table of primary
2175 opcode names, as well as priority fields to disassembly data
2176 structures to enforce a preferred disassembly format based on the
2177 ordering of the opcode tables.
2178 (load_insn_classes): Show a useful message if IC tables are missing.
2179 (load_depfile): Ditto.
2180 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2181 distinguish preferred disassembly.
2182 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2183 format. Fix incorrect flag on fma.s/fma.s.s0.
2184 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2185 the highest priority.
2186 * ia64-opc-b.c: Use more abbreviations.
2187 * ia64-asmtab.c: Regenerate.
2189 2000-04-21 Jason Eckhardt <jle@redhat.com>
2191 * hppa-dis.c (extract_16): New function.
2192 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2193 new operand types l,y,&,fe,fE,fx.
2195 2000-04-21 Richard Henderson <rth@redhat.com>
2196 David Mosberger <davidm@hpl.hp.com>
2197 Timothy Wall <twall@redhat.com>
2198 Bob Manson <manson@charmed.cygnus.com>
2199 Jim Wilson <wilson@redhat.com>
2201 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2202 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2203 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2205 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2206 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2207 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2208 * Makefile.in: Rebuild.
2209 * configure Rebuild.
2210 * configure.in (bfd_ia64_arch): New target.
2211 * disassemble.c (ARCH_ia64): Define.
2212 (disassembler): Support ARCH_ia64.
2213 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2214 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2215 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2216 ia64-war.tbl, ia64-waw.tbl: New files.
2218 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2220 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2221 (disassemble): Use them.
2223 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2225 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2226 * Makefile.am: Update dependencies.
2227 * Makefile.in: Regenerate.
2229 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2231 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2232 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2233 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2234 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2235 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2236 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2237 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2238 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2239 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2240 ansidecl.h as sysdep.h includes it.
2242 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2244 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2245 --enable-build-warnings option.
2246 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2247 * Makefile.in, configure: Re-generate.
2249 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2251 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2252 stc GBR,@-<REG_N> is available for arch_sh1_up.
2253 Group parallel processing insn with identical mnemonics together.
2254 Make three-operand psha / pshl come first.
2256 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2258 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2259 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2260 (sh_arg_type): Add A_PC.
2261 (sh_table): Update entries using immediates. Add repeat.
2262 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2263 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2265 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2267 * po/opcodes.pot: Regenerate.
2269 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2270 (DEP): Quote when passing vars to sub-make. Add warning message
2272 (DEP1): Rewrite for "gcc -MM".
2273 (CLEANFILES): Add DEP2.
2274 Update dependencies.
2275 * Makefile.in: Regenerate.
2277 2000-04-03 Denis Chertykov <denisc@overta.ru>
2279 * avr-dis.c: Syntax cleanup.
2280 (add0fff): Print the pc relative address as a signed number.
2281 (add03f8): Likewise.
2283 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2285 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2286 the parameter ATTRIBUTE_UNUSED.
2287 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2289 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2291 * m10300-opc.c: SP-based offsets are always unsigned.
2293 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2295 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2296 [branch always] instead of "undefined".
2298 2000-03-27 Nick Clifton <nickc@redhat.com>
2300 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2301 short instructions, from end of list of long instructions.
2303 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2305 * Makefile.am (CFILES): Add avr-dis.c.
2306 (ALL_MACHINES): Add avr-dis.lo.
2308 2000-03-27 Alan Modra <alan@linuxcare.com>
2310 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2312 (print_insn_avr): Call function via pointer in K&R compatible way.
2313 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2314 add0fff, add03f8): Convert to old style function declaration and
2316 (avrdis_opcode): Add prototype.
2318 2000-03-27 Denis Chertykov <denisc@overta.ru>
2320 * avr-dis.c: New file. AVR disassembler.
2321 * configure.in (bfd_avr_arch): New architecture support.
2322 * disassemble.c: Likewise.
2323 * configure: Regenerate.
2325 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2327 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2329 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2331 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2332 flag to determine if operand is pc-relative.
2334 (d30v_format_table):
2335 (REL6S3): Renamed from IMM6S3.
2336 Added flag OPERAND_PCREL.
2337 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2338 added flag OPERAND_PCREL.
2339 (IMM12S3U): Replaced with REL12S3.
2340 (SHORT_D2, LONG_D): Delay target is pc-relative.
2341 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2342 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2343 using the REL* operands.
2344 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2345 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2346 LONG_Db, using REL* operands.
2347 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2348 (d30v_opcode_table): Use new *r formats.
2350 2000-02-28 Nick Clifton <nickc@redhat.com>
2352 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2353 'signed_overflow_ok_p'.
2355 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2357 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2358 name of the libtool directory.
2359 * Makefile.in: Rebuild.
2361 2000-02-24 Nick Clifton <nickc@redhat.com>
2363 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2364 (cgen_clear_signed_overflow_ok): New function.
2365 (cgen_signed_overflow_ok_p): New function.
2367 2000-02-23 Andrew Haley <aph@redhat.com>
2369 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2370 m32r-ibld.c, m32r-opc.h: Rebuild.
2372 2000-02-23 Linas Vepstas <linas@linas.org>
2374 * i370-dis.c, i370-opc.c: New.
2376 * disassemble.c (ARCH_i370): Define.
2377 (disassembler): Handle it.
2379 * Makefile.am: Add support for Linux/IBM 370.
2380 * configure.in: Likewise.
2382 * Makefile.in: Regenerate.
2383 * configure: Likewise.
2385 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2387 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2388 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2391 2000-02-22 Andrew Haley <aph@redhat.com>
2393 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2395 * mips-opc.c (G6): New define.
2396 (mips_builtin_op): Add "move" definition for -gp32.
2398 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2400 From Grant Erickson <gerickso@Brocade.COM>:
2401 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2403 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2405 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2408 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2410 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2411 (print_insn_ppi): Likewise.
2412 (print_insn_shx): Use info->mach to select appropriate insn set.
2413 Add support for sh-dsp. Remove FD_REG_N support.
2414 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2415 (sh_arg_type): Likewise. Remove FD_REG_N.
2416 (sh_dsp_reg_nums): New enum.
2417 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2418 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2419 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2420 (arch_sh3_dsp_up): Likewise.
2421 (sh_opcode_info): New field: arch.
2422 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2423 D_REG_N. Fill in arch field. Add sh-dsp insns.
2425 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2427 * arm-dis.c: Change flavor name from atpcs-special to
2428 special-atpcs to prevent name conflict in gdb.
2429 (get_arm_regname_num_options, set_arm_regname_option,
2430 get_arm_regnames): New functions. API to access the several
2431 flavor of register names. Note: Used by gdb.
2432 (print_insn_thumb): Use the register name entry from the currently
2433 selected flavor for LR and PC.
2435 2000-02-10 Nick Clifton <nickc@redhat.com>
2437 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2439 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2440 "mulsh.h" instructions.
2441 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2443 (print_insn_mcore): Add support for little endian targets.
2444 Add support for MULSH and OPSR classes.
2446 2000-02-07 Nick Clifton <nickc@redhat.com>
2448 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2449 Previous delat did not take.
2451 2000-02-03 Timothy Wall <twall@redhat.com>
2453 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2454 to adjust target address bounds checking and calculate the
2455 appropriate octet offset into data.
2457 2000-01-27 Nick Clifton <nickc@redhat.com>
2459 * arm-dis.c: (parse_disassembler_option): Rename to
2460 parse_arm_disassembler_option and allow to be exported.
2462 * disassemble.c (disassembler_usage): New function: Print out any
2463 target specific disassembler options.
2464 Call arm_disassembler_options() if the ARM architecture is being
2467 * arm-dis.c (NUM_ELEM): Define this macro if not already
2469 (arm_regname): New struct type for ARM register names.
2470 (arm_toggle_regnames): Delete.
2471 (parse_disassembler_option): Use register name structure.
2472 (print_insn): New function: Combines duplicate code found in
2473 print_insn_big_arm and print_insn_little_arm.
2474 (print_insn_big_arm): Call print_insn.
2475 (print_insn_little_arm): Call print_insn.
2476 (print_arm_disassembler_options): Display list of supported,
2477 ARM specific disassembler options.
2479 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2481 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2482 ARM_STT_16BIT flag as Thumb code symbols.
2484 * arm-dis.c (printf_insn_little_arm): Ditto.
2486 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2488 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2489 of raw thumb instructions.
2491 2000-01-20 Nick Clifton <nickc@redhat.com>
2493 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2495 2000-01-03 Nick Clifton <nickc@cygnus.com>
2497 * arm-dis.c (streq): New macro.
2498 (strneq): New macro.
2499 (force_thumb): ew local variable.
2500 (parse_disassembler_option): New function: Parse a single, ARM
2501 specific disassembler command line switch.
2502 (parse_disassembler_option): Call parse_disassembler_option to
2503 parse individual command line switches.
2504 (print_insn_big_arm): Check force_thumb.
2505 (print_insn_little_arm): Check force_thumb.
2507 For older changes see ChangeLog-9899
2513 version-control: never
projects / deliverable / binutils-gdb.git / blob