1 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
3 * v850-opc.c (v850_opcodes): Further rearrangements.
6 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
8 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
11 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
13 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
16 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
18 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
20 * mips16-opc.c: Added mips16 sdbbp.
23 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
25 * v850-opc.c: Initialise processors field of v850_opcode structure.
28 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
30 Merge changes from Martin Hunt:
32 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
34 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
35 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
36 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
38 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
40 * d30v-dis.c (print_insn): First operand of d*i (delayed
41 branch) instructions is relative.
43 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
44 (d30v_operand_table): Add IMM6S3 type.
45 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
47 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
50 * d30v-opc.c: Correct entries for repeat*, and sat*.
51 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
52 types. Correct several formats.
54 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
56 * d30v-opc.c (pre_defined_registers): Change control registers.
58 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
59 SHORT_C2. Manual was incorrect.
61 * d30v-dis.c (lookup_opcode): Return value now indicates
62 if an opcode has a short and a long form. Used for deciding
63 to append a ".s" or ".l".
64 (print_insn): Append a ".s" to an instruction if it is
65 the short form and ".l" if it is a long form. Do not append
66 anything if the instruction has only one possible size.
68 * d30v-opc.c: Change mulx2h to require an even register.
69 New form: SHORT_A2; a SHORT_A form that needs an even
70 register as the first operand.
72 * d30v-dis.c (print_insn_d30v): Fix problem where the last
73 instruction was not being disassembled if there were an odd
74 number of instructions.
76 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
80 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
82 * v850-dis.c (disassemble): Improved display of register lists.
85 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
87 * sparc-opc.c (sparc_opcodes): Fix assembler args to
88 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
89 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
92 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
94 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
96 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
98 * cgen-asm.c (cgen_parse_address): New argument resultp.
100 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
102 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
104 * mn10200-dis.c (disassemble): PC relative instructions are
105 relative to the next instruction, not the current instruction.
107 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
109 * v850-dis.c (disassemble): Only signed extend values that are not
110 returned by extract functions.
111 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
113 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
115 * v850-opc.c: Update comments. Remove use of
116 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
118 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
120 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
122 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
124 * configure: Rebuilt with latest devo autoconf for NT support.
126 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
128 * v850-dis.c (disassemble): Use curly brace syntax for register
131 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
132 where r0 is being used as a destination register.
135 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
137 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
141 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
143 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
144 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
145 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
146 Add insns to access SGR and DBR.
147 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
150 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
152 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
154 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
156 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
157 start-sanitize-v850eq
158 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
160 start-sanitize-v850eq
163 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
165 * configure (cgen_files): Add support for v850e target.
166 * configure.in (cgen_files): Add support for v850e target.
169 start-sanitize-v850eq
170 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
172 * configure (cgen_files): Add support for v850eq target.
173 * configure.in (cgen_files): Add support for v850eq target.
176 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
178 * configure.in (bfd_arc_arch): Add.
179 * configure: Rebuild.
180 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
181 * Makefile.in: Rebuild.
182 * arc-dis.c, arc-opc.c: New files.
183 * disassemble.c (ARCH_all): Define ARCH_arc.
184 (disassembler): Add ARC support.
186 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
188 start-sanitize-v850eq
189 * .Sanitize (Do-first): Add support for keep-v850eq command line
192 * v850-dis.c (disassemble): Add support for v850EQ instructions.
194 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
195 (v850_opcodes): Add v850EQ instructions.
198 * .Sanitize (Do-first): Add support for keep-v850e command line
201 * v850-dis.c (disassemble): Add support for v850E instructions.
203 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
204 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
205 insert_spe, extract_spe): New Functions.
206 (v850_opcodes): Add v850E instructions.
209 * v850-opc.c: Reorganised and re-layed out to improve readability
212 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
214 * configure: Rebuild with autoconf 2.12.1.
216 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
218 * aclocal.m4, configure: Rebuild with new automake patches.
220 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
222 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
223 * acinclude.m4: Just include acinclude.m4 from BFD.
224 * aclocal.m4, configure: Rebuild.
226 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
228 * Makefile.am: New file, based on old Makefile.in.
229 * acconfig.h: New file.
230 * acinclude.m4: New file.
231 * stamp-h.in: New file.
232 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
233 Removed shared library handling; now handled by libtool. Replace
234 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
235 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
236 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
237 handling in AC_OUTPUT.
238 * dep-in.sed: Change .o to .lo.
239 * Makefile.in: Now built with automake.
240 * aclocal.m4: Now built with aclocal.
241 * config.in, configure: Rebuild.
243 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
245 * mips-opc.c: Fix typo/thinko in "eret" instruction.
248 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
250 * mips-opc.c: Fix coding of mtsa.
253 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
255 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
257 * sparc-dis.c (sorted_opcodes): New static local.
258 (struct opcode_hash): `opcode' is pointer to const element.
259 (build_hash): First arg is now table of sorted pointers.
260 (print_insn_sparc): Sort opcodes by sorting table of pointers.
261 (compare_opcodes): Update.
263 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
265 * cgen-opc.c: #include <ctype.h>.
266 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
267 Handle case insensitive hashing.
268 (hash_keyword_value): Change type of `value' to unsigned int.
270 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
272 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
273 precision FP, mark it as such. Likewise for double precision
274 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
277 (mips_builtin_opcodes): Remove non-existant r5900 instructions
281 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
283 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
284 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
287 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
289 * ppc-opc.c (extract_nsi): make unsigned expression signed before
291 (UNUSED): remove one level of parens, so MSVC doesn't choke on
292 nesting depth when all the macros are expanded.
294 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
296 * sparc-opc.c: The fcmp v9a instructions take an integer register
297 as a destination, not a floating point register. From Christian
298 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
300 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
302 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
303 syntax. From Roman Hodek
304 <rnhodek@faui22c.informatik.uni-erlangen.de>.
306 * i386-dis.c (twobyte_has_modrm): Fix pand.
308 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
310 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
312 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
314 * arm-dis.c: Add prototypes for arm_decode_shift and
317 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
319 * mips-opc.c: Add r3900 insns.
321 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
323 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
324 print delay slot instructions on the same line. When using a PC
325 relative load, add a comment with the value being loaded if it can
328 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
330 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
331 to pushS/popS for segment regs and byte constant so that
332 pushw/popw printed when in 16 bit data mode.
334 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
335 print cbtw, cwtd in 16 bit data mode.
336 * i386-dis.c (putop): extra case W to support above.
338 * i386-dis.c (print_insn_x86): print addr32 prefix when given
339 address size prefix in 16 bit address mode.
341 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
343 * sh-dis.c: Reindent. Rename local variable fprintf to
346 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
348 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
350 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
352 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
354 * mips16-opc.c (mip16_opcodes): same.
356 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
358 * m68k-opc.c (moveb): Change $d to %d.
360 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
362 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
363 (twobyte_has_modrm): Likewise.
365 (OP_MMX, OP_EM, OP_MS): New static functions.
367 * i386-dis.c: Revert patch of April 4. The output now matches
370 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
372 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
375 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
377 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
379 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
381 * Makefile.in (install): Depend upon installdirs.
382 (installdirs): New target.
384 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
386 From Thomas Graichen <graichen@rzpd.de>:
387 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
388 * configure: Rebuild.
390 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
392 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
393 Delete string{,s}.h support.
395 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
397 * cgen-asm.c (cgen_parse_operand_fn): New global.
398 (cgen_parse_{{,un}signed_integer,address}): Update call to
399 cgen_parse_operand_fn.
400 (cgen_init_parse_operand): New function.
401 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
402 from cgen_asm_init_parse.
403 (m32r_cgen_assemble_insn): New operand `errmsg'.
404 Delete call to as_bad, return error message to caller.
405 (m32r_cgen_asm_hash_keywords): #if 0 out.
407 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
409 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
411 [case 'J']: Fix typo in register name.
413 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
415 * configure.in: Substitute SHLIB_LIBS.
416 * configure: Rebuild.
417 * Makefile.in (SHLIB_LIBS): New variable.
418 ($(SHLIB)): Use $(SHLIB_LIBS).
420 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
422 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
424 * cgen-opc.c (hash_keyword_name): Improve algorithm.
426 * disassemble.c (disassembler): Handle m32r.
428 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
430 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
431 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
432 * Makefile.in (CFILES): Add them.
433 (ALL_MACHINES): Add them.
434 (dependencies): Regenerate.
435 * configure.in (cgen_files): New variable.
436 (bfd_m32r_arch): Add entry.
437 * configure: Regenerate.
439 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
441 * configure.in: Correct file names for bfd_mn10[23]00_arch.
442 * configure: Rebuild.
444 * Makefile.in: Rebuild dependencies.
446 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
448 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
451 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
453 * Branched binutils 2.8.
455 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
457 * m10200-dis.c: Rename from mn10200-dis.c.
458 * m10200-opc.c: Rename from mn10200-opc.c.
459 * m10300-dis.c: Rename from mn10300-dis.c
460 * m10300-opc.c: Rename from mn10300-opc.c.
461 * Makefile.in: Update accordingly.
463 * mips16-opc.c: Add mul and dmul macros.
465 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
467 * makefile.vms: Update CFLAGS, add clean target.
469 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
471 * mips-opc.c: Add "wait". From Ralf Baechle
472 <ralf@gnu.ai.mit.edu>.
474 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
475 * configure, config.in: Rebuild.
476 * sysdep.h: Include <stdlib.h> if it exists.
477 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
479 * Makefile.in: Rebuild dependencies.
481 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
483 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
484 Andrew Bray <andy@madhouse.demon.co.uk>.
486 * mips-opc.c: Add cast when setting mips_opcodes.
488 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
490 * v850-dis.c (disassemble): Fix sign extension problem.
491 * v850-opc.c (extract_d*): Fix sign extension problems to make
492 disassembly calculate branch offsets correctly.
494 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
496 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
498 * mips-opc.c: Add dctr and dctw.
501 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
503 * d30v-dis.c (print_insn): Change the way signed constants
506 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
508 * Makefile.in (BFD_H): New variable.
509 (HFILES): New variable.
510 (CFILES): Add all C files.
511 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
512 Delete old dependencies, and build new ones.
513 * dep-in.sed: New file.
515 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
517 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
519 start-sanitize-coldfire
520 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
522 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
525 end-sanitize-coldfire
526 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
528 * mn10200-opc.c: Change "trap" to "syscall".
529 * mn10300-opc.c: Add new "syscall" instruction.
531 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
533 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
534 mulul insns on the coldfire.
536 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
538 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
539 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
540 (print_insn_little_arm): Likewise.
542 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
544 Based on patches from H.J. Lu <hjl@lucon.org>:
545 * i386-dis.c (fetch_data): Add prototype.
546 * m68k-dis.c (fetch_data): Add prototype.
547 (dummy_print_address): Add prototype. Make static.
548 * ppc-opc.c (valid_bo): Add prototype.
549 * sparc-dis.c (build_hash_table): Add prototype.
550 (is_delayed_branch, compute_arch_mask): Add prototypes.
551 (print_insn_sparc): Make several local variables const.
552 (compare_opcodes): Change arguments to const PTR. Add prototype.
553 * sparc-opc.c (arg): Change name field to be const.
554 (lookup_name, lookup_value): Add prototypes. Change table and
555 name parameters to be const.
556 (sparc_encode_asi): Change name parameter to be const.
557 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
558 (sparc_encode_sparclet_cpreg): Likewise.
559 (sparc_decode_asi): Change return type to be const.
560 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
561 (sparc_decode_sparclet_cpreg): Likewise.
563 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
565 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
566 Solaris doesn't like the combined options, and the -f is
568 (stamp-tshlink, install): Likewise.
570 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
572 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
575 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
577 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
579 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
581 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
584 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
586 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
589 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
591 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
593 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
595 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
598 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
600 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
601 floatformat_to_double to make portable.
602 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
605 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
607 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
608 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
610 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
612 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
613 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
616 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
618 * tic80-opc.c (LSI_SCALED): Renamed from this ...
619 (OFF_SL_BR_SCALED): ... to this, and added the flag
620 TIC80_OPERAND_BASEREL to the flags word.
621 (tic80_opcodes): Replace all occurances of LSI_SCALED with
625 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
627 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
628 Change mips_opcodes from const array to a pointer,
629 and change bfd_mips_num_opcodes from const int to int,
630 so that we can increase the size of the mips opcodes table
634 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
636 * tic80-opc.c (tic80_predefined_symbols): Revert change to
637 store BITNUM values in the table in one's complement form
638 to match behavior when assembler is given a raw numeric
639 value for a BITNUM operand.
640 * tic80-dis.c (print_operand_bitnum): Ditto.
644 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
646 * d30v-opc.c: Removed references to FLAG_X.
649 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
651 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
654 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
656 * Makefile.in: Added d30v object files.
657 * configure: (bfd_d30v_arch) Rebuilt.
658 * configure.in: (bfd_d30v_arch) Added new case.
659 * d30v-dis.c: New file.
660 * d30v-opc.c: New file.
661 * disassemble.c (disassembler) Add entry for d30v.
665 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
667 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
668 representations for the floating point BITNUM values.
670 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
672 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
673 in the table in one's complement form, as they appear in the
675 (tic80_symbol_to_value): Use macros to access predefined
677 (tic80_value_to_symbol): Ditto.
678 (tic80_next_predefined_symbol): New function.
679 * tic80-dis.c (print_operand_bitnum): Remove code that did
680 one's complement for BITNUM values.
684 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
686 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
689 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
691 * makefile.vms: Remove 8 bit characters. Update to latest
694 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
696 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
698 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
700 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
701 (IMM24_PCREL): Likewise.
703 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
705 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
706 address for an extended PC relative instruction that is not a
709 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
711 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
715 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
717 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
718 (tic80_opcodes): Sort entries so that long immediate forms
719 come after short immediate forms, making it easier for
720 assembler to select the right one for a given operand.
723 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
725 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
727 (print_insn_mips16): Likewise.
730 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
732 * mips-opc.c: add r5900.
736 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
738 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
739 a symbol class that restricts translation to just that
740 class (general register, condition code, etc).
742 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
744 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
745 and REG_DEST_E for register operands that have to be
746 an even numbered register. Add REG_FPA for operands that
747 are one of the floating point accumulator registers.
748 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
749 (tic80_opcodes): Change entries that need even numbered
750 register operands to use the new operand table entries.
751 Add "or" entries that are identical to "or.tt" entries.
754 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
756 * mips16-opc.c: Add new cases of exit instruction for
758 * mips-dis.c (print_mips16_insn_arg): Display floating point
759 registers in operands of exit instruction. Print `$' before
760 register names in operands of entry and exit instructions.
763 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
765 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
766 pairs for all predefined symbols recognized by the assembler.
767 Also used by the disassembling routines.
768 (tic80_symbol_to_value): New function.
769 (tic80_value_to_symbol): New function.
770 * tic80-dis.c (print_operand_control_register,
771 print_operand_condition_code, print_operand_bitnum):
772 Remove private tables and use tic80_value_to_symbol function.
775 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
777 * d10v-dis.c (print_operand): Change address printing
778 to correctly handle PC wrapping. Fixes PR11490.
780 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
782 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
785 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
787 * mips-dis.c (print_insn_mips16): Set insn_info information.
788 (print_mips16_insn_arg): Likewise.
790 * mips-dis.c (print_insn_mips16): Better handling of an extend
791 opcode followed by an instruction which can not be extended.
793 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
795 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
796 coldfire moveb instruction to not allow an address register as
797 destination. Although the documentation does not indicate that
798 this is invalid, experiments uncovered unexpected behavior.
799 Added a comment explaining the situation. Thanks to Andreas
800 Schwab for pointing this out to me.
803 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
805 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
806 entries are presorted so that entries with the same mnemonic are
807 adjacent to each other in the table. Sort the entries for each
808 instruction so that this is true.
811 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
813 * m68k-dis.c: Include <libiberty.h>.
814 (print_insn_m68k): Sort the opcode table on the most significant
815 nibble of the opcode.
818 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
820 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
821 "vsub", "vst", "xnor", and "xor" instructions.
822 (V_a1): Renamed from V_a, msb of accumulator reg number.
823 (V_a0): Add macro, lsb of accumulator reg number.
825 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
827 * tic80-dis.c (print_insn_tic80): Broke excessively long
828 function up into several smaller ones and arranged for
829 the instruction printing function to be callable recursively
830 to print vector instructions that have both a load and a
831 math instruction packed into a single opcode.
832 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
833 to explain why it comes after the other vector opcodes.
836 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
838 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
839 move insns to handle immediate operands.
841 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
843 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
844 fix operand mask in the "moveml" entries for the coldfire.
847 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
849 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
850 New macros for building vector instruction opcodes.
851 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
852 FMT_LI, which were unused. The field is now a flags field.
853 Remove some opcodes that are possible, but illegal, such
854 as long immediate instructions with doubles for immediate
855 values. Add "vadd" and "vld" instructions.
857 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
859 * tic80-opc.c (tic80_operands): Reorder some table entries to make
860 the order more logical. Move the shift alias instructions ("rotl",
861 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
862 interspersed with the regular sr.x and sl.x instructions. Add
863 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
864 "sub", "subu", "swcr", and "trap".
866 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
868 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
869 (OFF_SL_PC): Renamed from OFF_SL.
870 (OFF_SS_BR): New operand type for base relative operand.
871 (OFF_SL_BR): New operand type for base relative operand.
872 (REG_BASE): New operand type for base register operand.
873 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
874 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
875 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
877 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
878 10 char field, padded with spaces on rhs, rather than a string
879 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
880 than old TIC80_OPERAND_RELATIVE. Add support for new
881 TIC80_OPERAND_BASEREL flag bit.
883 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
885 * tic80-dis.c (print_insn_tic80): Print floating point operands
887 * tic80-opc.c (SPFI): Add single precision floating point
888 immediate operand type.
889 (ROTATE): Add rotate operand type for shifts.
890 (ENDMASK): Add for shifts.
891 (n): Macro for the 'n' bit.
892 (i): Macro for the 'i' bit.
893 (PD): Macro for the 'PD' field.
894 (P2): Macro for the 'P2' field.
895 (P1): Macro for the 'P1' field.
896 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
900 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
902 * mn10200-dis.c (disassemble): Mask off unwanted bits after
903 adding in current address for pc-relative operands.
906 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
908 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
909 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
910 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
911 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
912 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
913 REG_BASE_M_SI, REG_BASE_M_LI respectively.
914 (REG_SCALED, LSI_SCALED): New operand types.
915 (E): New macro for 'E' bit at bit 27.
916 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
917 opcodes, including the various size flavors (b,h,w,d) for
918 the direct load and store instructions.
920 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
922 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
924 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
925 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
926 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
927 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
928 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
929 masks with "MASK_* & ~M_*" to get the M bit reset.
930 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
932 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
934 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
935 correctly. Add support for printing TIC80_OPERAND_BITNUM and
936 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
938 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
939 CC, SICR, and LICR table entries.
940 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
941 "bcnd", and "brcr" opcodes.
944 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
946 * ppc-opc.c (powerpc_operands): Make comment match the
947 actual fields (no shift field).
948 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
950 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
951 partial implementation, work in progress.
952 * tic80-opc.c (tic80_operands): Begin construction operands table.
953 (tic80_opcodes): Continue populating opcodes table and start
954 filling in the operand indices.
955 (tic80_num_opcodes): Add this.
958 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
960 * m68k-opc.c: Add #B case for moveq.
962 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
964 * mn10300-dis.c (disassemble): Make sure all variables are initialized
965 before they are used.
967 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
969 * v850-opc.c (v850_opcodes): Put curly-braces around operands
970 for "breakpoint" instruction.
972 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
974 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
975 (dep): Use ALL_CFLAGS rather than CFLAGS.
977 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
979 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
982 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
984 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
986 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
989 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
991 * mips16-opc.c: Add "abs".
994 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
996 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
997 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
998 (disassembler): Add bfd_arch_tic80 support to set disassemble
1000 * tic80-dis.c (print_insn_tic80): Add stub.
1002 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1004 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1005 * configure: Regenerate with autoconf.
1006 * tic80-dis.c: Add file.
1007 * tic80-opc.c: Add file.
1010 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1012 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1014 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1016 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1017 (mn10200_opcodes): Use it for some logicals and btst insns.
1018 Add "break" and "trap" instructions.
1020 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1022 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1024 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1026 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1027 relative load or add now depends upon whether the instruction is
1030 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1032 * mn10200-dis.c: Finish writing disassembler.
1033 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1034 Fix mask for "jmp (an)".
1036 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1037 handle endianness issues for mn10300.
1039 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1041 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1043 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1044 instruction. Fix opcode field for "movb (imm24),dn".
1046 * mn10200-opc.c (mn10200_operands): Fix insertion position
1049 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1051 * mn10200-opc.c: Create mn10200 opcode table.
1052 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1053 but moving along nicely.
1055 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1057 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1059 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1061 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1062 specifiers for fmovem* instructions.
1064 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1066 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1068 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1070 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1073 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1075 * mn10300-opc.c: Add some comments explaining the various
1078 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1080 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1082 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1085 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1086 operand specifiers in fmovm* instructions.
1088 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1090 * ppc-opc.c (insert_li): Give an error if the offset has the two
1091 least significant bits set.
1093 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1095 * mips-dis.c (print_insn_mips16): Separate the instruction from
1096 the arguments with a tab, not a space.
1098 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1100 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1103 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1106 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1108 * configure: Rebuild with autoconf 2.12.
1110 Add support for mips16 (16 bit MIPS implementation):
1111 * mips16-opc.c: New file.
1112 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1113 (mips16_reg_names): New static array.
1114 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1115 after seeing a 16 bit symbol.
1116 (print_insn_little_mips): Likewise.
1117 (print_insn_mips16): New static function.
1118 (print_mips16_insn_arg): New static function.
1119 * mips-opc.c: Add jalx instruction.
1120 * Makefile.in (mips16-opc.o): New target.
1121 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1122 * configure: Rebuild.
1124 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1126 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1127 operand specifiers in *save, *restore and movem* instructions.
1129 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1132 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1133 register operands for immediate arithmetic, not, neg, negx, and
1134 set according to condition instructions.
1136 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1137 specifier of the effective-address operand in immediate forms of
1138 arithmetic instructions. The specifier for the immediate operand
1139 notes how and where the constant will be stored.
1141 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1143 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1146 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1149 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1151 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1153 * mn10300-dis.c (disassemble): Handle register lists.
1155 * mn10300-opc.c: Fix handling of register list operand for
1156 "call", "ret", and "rets" instructions.
1158 * mn10300-dis.c (disassemble): Print PC-relative and memory
1159 addresses symbolically if possible.
1160 * mn10300-opc.c: Distinguish between absolute memory addresses,
1161 pc-relative offsets & random immediates.
1163 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1165 (disassemble): Handle SPLIT and EXTENDED operands.
1167 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1169 * mn10300-dis.c: Rough cut at printing some operands.
1171 * mn10300-dis.c: Start working on disassembler support.
1172 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1174 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1176 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1178 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1180 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1182 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1184 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1185 register argument is calls and jmp instructions.
1187 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1189 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1190 getx operand. Fix opcode for mulqu imm,dn.
1192 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1194 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1195 in MN10300_OPERAND_SPLIT operands for how many bits
1196 appear in the basic insn word. Add IMM32_HIGH24,
1197 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1198 (mn10300_opcodes): Use new operands as needed.
1200 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1201 for bset, bclr, btst instructions.
1202 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1204 * mn10300-opc.c (mn10300_operands): Remove many redundant
1205 operands. Update opcode table as appropriate.
1206 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1207 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1209 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1211 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1212 operands (for indexed load/stores). Fix bitpos for DI
1213 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1214 few instructions that insert immediates/displacements in the
1215 middle of the instruction. Add IMM8E for 8 bit immediate in
1216 the extended part of an instruction.
1217 (mn10300_operands): Use new opcodes as appropriate.
1219 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1221 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1222 sequential so the assembler never parallelizes it with
1225 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1227 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1228 a data/address register that appears in register field 0
1229 and register field 1.
1230 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1232 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1234 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1235 standard disassembly.
1237 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1238 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1239 Recategorize PALcode instructions.
1241 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1243 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1245 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1247 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1248 there are no operand types.
1250 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1252 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1254 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1256 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1258 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1260 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1262 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1263 and sst.w instructions.
1265 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1268 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1270 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1273 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1275 * ppc-opc.c (PPCPWR2): Define.
1276 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1279 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1281 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1282 field for movhu instruction.
1284 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1285 cast value to "long" not "signed long" to keep hpux10
1288 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1290 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1293 * mn10300-opc.c (FMT*): Remove definitions.
1295 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1296 for shift-by-register opcodes.
1298 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1299 into [AD][MN][01] for encoding the position of the register
1302 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1304 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1305 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1307 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1309 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1310 Fix various typos. Add "PAREN" operand.
1311 (MEM, MEM2): Define.
1312 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1313 operands. Fix several typos.
1315 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1318 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1320 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1321 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1323 (mn10300_opcodes): Break opcode format out into its own field.
1324 Update many operand fields to deal with signed vs unsigned
1325 issues. Fix one or two typos in the "mov" instruction
1326 opcode, mask and/or operand fields.
1328 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1330 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1331 m68851 wasn't reset.
1333 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1335 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1336 all opcodes. Very rough cut at operands for all opcodes.
1338 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1341 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1343 * mn10200-opc.c, mn10300-opc.c: New files.
1344 * mn10200-dis.c, mn10300-dis.c: New files.
1345 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1346 * disassemble.c: Break mn10x00 support into 10200 and 10300
1348 * configure.in: Likewise.
1349 * configure: Rebuilt.
1351 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1353 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1355 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1357 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1359 * disassemble (ARCH_mn10x00): Define.
1360 (disassembler): Handle bfd_arch_mn10x00.
1361 * configure.in: Recognize bfd_mn10x00_arch.
1362 * configure: Rebuilt.
1364 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1366 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1367 accordingly. Don't declare functions using op_rtn.
1369 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1371 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1372 params to be more standard.
1373 * (disassemble): Print absolute addresses and symbolic names for
1374 branch and jump targets.
1375 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1377 * (v850_opcodes): Add breakpoint insn.
1379 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1381 * m68k-opc.c: Move the fmovemx data register cases before the
1382 other cases, so that they get recognized before the data register
1383 does gets treated as a degenerate register list.
1385 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1387 * mips-opc.c: Add a case for "div" and "divu" with two registers
1388 and a destination of $0.
1390 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1392 * mips-dis.c (print_insn_arg): Add prototype.
1393 (_print_insn_mips): Ditto.
1395 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1397 * mips-dis.c (print_insn_arg): Print condition code registers as
1400 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1402 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1404 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1406 * v850-dis.c (disassemble): Make static. Provide prototype.
1408 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1410 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1413 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1415 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1416 ']' characters into the output stream.
1417 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1418 Add "memop" field to all opcodes (for the disassembler).
1419 Reorder opcodes so that "nop" comes before "mov" and "jr"
1420 comes before "jarl".
1422 * v850-dis.c (print_insn_v850): Fix typo in last change.
1424 * v850-dis.c (print_insn_v850): Properly handle disassembling
1425 a two byte insn at the end of a memory region when the memory
1426 region's size is only two byte aligned.
1428 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1430 * v850-dis.c (v850_reg_names): Define.
1431 (v850_sreg_names, v850_cc_names): Likewise.
1432 (disassemble): Very rough cut at printing operands (unformatted).
1434 * v850-opc.c (BOP_MASK): Fix.
1435 (v850_opcodes): Fix mask for jarl and jr.
1437 * v850-dis.c: New file. Skeleton for disassembler support.
1438 * Makefile.in Remove v850 references, they're not needed here
1439 and they weren't being sanitized away.
1440 * configure.in: Add v850-dis.o when building v850 toolchains.
1441 * configure: Rebuilt.
1442 * disassemble.c (disassembler): Call v850 disassembler.
1444 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1445 (insert_d8_6, extract_d8_6): New functions.
1446 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1447 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1449 (IF4A, IF4B): Use "D7" instead of "D7S".
1450 (IF4C, IF4D): Use "D8_7" instead of "D8".
1451 (IF4E, IF4F): New. Use "D8_6".
1452 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1453 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1455 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1456 (v850_operands): Change D16 to D16_15, use special insert/extract
1457 routines. New new D16 that uses the generic insert/extract code.
1458 (IF7A, IF7B): Use D16_15.
1459 (IF7C, IF7D): New. Use D16.
1460 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1462 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1463 message. Issue an error if the branch offset is odd.
1465 * v850-opc.c: Add notes about needing special insert/extract
1466 for all the load/store insns, except "ld.b" and "st.b".
1468 * v850-opc.c (insert_d22, extract_d22): New functions.
1469 (v850_operands): Use insert_d22 and extract_d22 for
1471 (insert_d9): Fix range check.
1473 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1475 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1476 and set bits field to D9 and D22 operands.
1478 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1480 * v850-opc.c (v850_operands): Define SR2 operand.
1481 (v850_opcodes): "ldsr" uses R1,SR2.
1483 * v850-opc.c (v850_opcodes): Fix opcode specs for
1484 sld.w, sst.b, sst.h, sst.w, and nop.
1486 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1488 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1489 end of the opcode table.
1491 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1493 * d10v-opc.c (pre_defined_registers): Added register pairs,
1494 "r0-r1", "r2-r3", etc.
1496 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1498 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1499 Create I16U for an unsigned 16bit mmediate operand.
1500 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1502 * v850-opc.c (v850_operands): Define EP operand.
1503 (IF4A, IF4B, IF4C, IF4D): Use EP.
1505 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1506 with immediate operand, "movhi". Tweak "ldsr".
1508 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1509 correct. Get sld.[bhw] and sst.[bhw] closer.
1511 * v850-opc.c (v850_operands): "not" is a two byte insn
1513 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1515 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1517 * v850-opc.c (two): Get order of words correct.
1519 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1521 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1522 register source and destination operands.
1523 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1525 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1526 same thinko in "trap" opcode.
1528 * v850-opc.c (v850_opcodes): Add initializer for size field
1531 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1532 Add D8 for 8-bit unsigned field in short load/store insns.
1533 (IF4A, IF4D): These both need two registers.
1534 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1535 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1536 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1537 for "ldsr" and "stsr".
1538 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1541 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1542 short store word (sst.w).
1544 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1546 * v850-opc.c (v850_operands): Added insert and extract fields,
1547 pointers to functions that handle unusual operand encodings.
1549 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1551 * v850-opc.c (v850_opcodes): Enable "trap".
1553 * v850-opc.c (v850_opcodes): Fix order of displacement
1554 and register for "set1", "clr1", "not1", and "tst1".
1556 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1558 * v850-opc.c (v850_operands): Add "B3" support.
1559 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1562 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1564 * v850-opc.c: Close unterminated comment.
1566 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1568 * v850-opc.c (v850_operands): Add flags field.
1569 (v850_opcodes): add move opcodes.
1571 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1573 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1574 * configure: (bfd_v850v_arch) Add new case.
1575 * configure.in: (bfd_v850_arch) Add new case.
1576 * v850-opc.c: New file.
1578 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1580 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1582 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1584 * d10v-opc.c: Add additional information to the opcode
1585 table to help determinine which instructions can be done
1588 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1590 * mpw-make.sed: Update editing of include pathnames to be
1593 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1595 * arm-opc.h: Added "bx" instruction definition.
1597 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1599 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1601 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1603 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1605 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1607 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1609 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1611 * makefile.vms: Update for alpha-opc changes.
1613 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1615 * i386-dis.c (print_insn_i386): Actually return the correct value.
1616 (ONE, OP_ONE): #ifdef out; not used.
1618 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1620 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1621 Changed subi operand type to treat 0 as 16.
1623 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1625 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1628 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1630 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1631 memory transfer instructions. Add new format string entries %h and %s.
1632 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1635 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1637 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1638 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1640 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1642 * alpha-dis.c (print_insn_alpha_osf): Remove.
1643 (print_insn_alpha_vms): Remove.
1644 (print_insn_alpha): Make globally visible. Chose the register
1645 names based on info->flavour.
1646 * disassemble.c: Always return print_insn_alpha for the alpha.
1648 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1650 * d10v-dis.c (dis_long): Handle unknown opcodes.
1652 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1654 * d10v-opc.c: Changes to support signed and unsigned numbers.
1655 All instructions with the same name that have long and short forms
1656 now end in ".l" or ".s". Divs added.
1657 * d10v-dis.c: Changes to support signed and unsigned numbers.
1659 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1661 * d10v-dis.c: Change all functions to use info->print_address_func.
1663 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1665 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1666 move ccr/sr insns more strict so that the disassembler only
1667 selects them when the addressing mode is data register.
1669 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1670 * d10v-opc.c (pre_defined_registers): Declare.
1671 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1672 to pick a better name for the registers.
1674 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1676 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1677 operands for fexpand and fpmerge. From Christian Kuehnke
1678 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1680 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1682 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1683 print routine. Take new regnames and cpumask arguments.
1684 Kill the environment variable nonsense.
1685 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1686 (print_insn_alpha_vms): New function. Do VMS style regnames.
1687 * disassemble.c (disassembler): Test bfd flavour to pick
1688 between OSF and VMS routines. Default to OSF.
1690 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1692 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1693 * configure: Rebuild.
1694 * Makefile.in (install): Use @INSTALL_SHLIB@.
1696 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1698 * configure: (bfd_d10v_arch) Add new case.
1699 * configure.in: (bfd_d10v_arch) Add new case.
1700 * d10v-dis.c: New file.
1701 * d10v-opc.c: New file.
1702 * disassemble.c (disassembler) Add entry for d10v.
1704 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1706 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1707 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1709 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1711 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1712 distinguish between variants of the instruction set.
1713 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1714 distinguish between variants of the instruction set.
1716 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1718 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1719 the 8086 instruction set.
1720 * i386-dis.c: General cleanups. Make most things static. Add
1721 prototypes. Get rid of static variables aflags and dflags. Pass
1722 them as args (to almost everything).
1724 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1726 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1728 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1730 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1731 if the next arg is marked with SRC_IN_DST. Gross.
1733 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1734 we're looking for and find EXR.
1736 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1737 if we're looking for KBIT and we don't find it.
1739 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1742 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1743 3bit immediate operands.
1745 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1747 * Released binutils 2.7.
1749 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1750 <kkaempf@progis.ac-net.de>.
1752 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1754 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1756 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1758 * sparc-dis.c (print_insn_sparclite): New routine to print
1759 sparclite instructions.
1761 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1763 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1765 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1767 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1768 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1769 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1771 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1773 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1774 Use autoconf-set values.
1775 (docdir, oldincludedir): Removed.
1776 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1778 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1780 * alpha-opc.c: New file.
1781 * alpha-opc.h: Remove.
1782 * alpha-dis.c: Complete rewrite to use new opcode table.
1783 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1784 * configure: Rebuild with autoconf 2.10.
1785 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1786 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1788 (alpha-opc.o): New target.
1790 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1792 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1793 Set imm_added_to_rs1 even if the source and destination register
1796 * sparc-opc.c: Add some two operand forms of the wr instruction.
1798 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1800 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1803 * disassemble.c (disassembler): Handle H8/S.
1804 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1806 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1808 * sparc-opc.c: Add beq/teq as aliases for be/te.
1810 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1811 <sergei@msil.sps.mot.com>.
1813 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1815 * makefile.vms: New file.
1817 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1819 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1821 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1824 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1826 * i386-dis.c (OP_OFF): Call append_prefix.
1828 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1830 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1831 unsigned long to silence a warning from the Solaris PowerPC
1834 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1836 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1838 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1840 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1842 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1843 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1844 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1845 cpush, cpusha, cpull sparclet insns.
1847 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1849 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1851 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1853 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1854 Set F_FLOAT on other floating point instructions.
1856 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1858 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1860 (powerpc_opcodes): Add 860/821 specific SPRs.
1862 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1864 * configure.in: Permit --enable-shared to specify a list of
1865 directories. Set and substitute BFD_PICLIST.
1866 * configure: Rebuild.
1867 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1868 uses. Set to @BFD_PICLIST@.
1870 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1872 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1873 not "abs", which may be needed for the absolute in something
1874 like btst #0,@10:8. Print L_3 immediates separately from other
1875 immediates. Change ABSMOV reference to ABS8MEM.
1877 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1879 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1880 (current_arch_mask): New static global.
1881 (compute_arch_mask): New static function.
1882 (print_insn_sparc): Delete sparc_v9_p. New static local
1883 current_mach. Resort opcode table if current_mach changes.
1884 Generalize "insn not supported" test.
1885 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1886 Delete test for v9/!v9.
1887 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1889 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1890 (brfcx): Renamed to FBRX.
1891 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1892 coprocessor mnemonics are not supported on the sparclet).
1893 (condf): Renamed to CONDF.
1894 (SLCBCC2): Delete F_ALIAS flag.
1896 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1898 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1899 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1901 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1903 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1904 that the shared library version number is set correctly.
1906 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1908 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1909 Miles Bader <miles@gnu.ai.mit.edu>.
1910 * configure: Rebuild.
1912 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1914 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1917 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1919 * configure: Rebuild with autoconf 2.8.
1921 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1923 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1924 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1926 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1928 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1929 since they appear as targets in Makefile.in.
1930 * configure: Rebuild.
1932 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1934 * mpw-make.sed: Edit out shared library support bits.
1936 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1938 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1939 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1940 (sparc_opcodes): Add sparclet insns.
1941 (sparclet_cpreg_table): New static local.
1942 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1943 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1945 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1947 * i386-dis.c (index16): New static variable.
1948 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1950 (OP_indirE): Return result of OP_E.
1951 (OP_E): Check for 16 bit addressing mode, and disassemble
1952 correctly. Optimised 32 bit case a little. Don't print
1953 "(base,index,scale)" when sib specifies only an offset.
1955 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1957 * configure.in: Set and substitute SHLIB_DEP.
1958 * configure: Rebuild.
1959 * Makefile.in (SHLIB_DEP): New variable.
1960 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1961 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1962 COMMON_SHLIB, add them to piclist with appropriate modifications.
1963 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1964 here: just use piclist.
1966 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1968 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1969 (print_insn_sparc): Rewrite v9/not-v9 tests.
1970 (compare_opcodes): Likewise.
1971 * sparc-opc.c (MASK_<ARCH>): Define.
1972 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1973 (sparclet,v6notv9): Define.
1974 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1975 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1977 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1979 * configure.in: Call AC_PROG_CC before configure.host.
1980 * configure: Rebuild.
1982 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1984 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1986 * i386-dis.c (onebyte_has_modrm): New static array.
1987 (twobyte_has_modrm): New static array.
1988 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1990 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1992 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1995 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1997 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2000 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2002 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2003 m68010up, not just m68020up | cpu32.
2005 * Makefile.in (SONAME): New variable.
2006 ($(SHLINK)): Make a link to the transformed name, as well.
2007 (stamp-tshlink): New target.
2008 (install): Skip stamp-tshlink during install.
2010 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2012 * configure.in: Call AC_ARG_PROGRAM.
2013 * configure: Rebuild.
2014 * Makefile.in (program_transform_name): New variable.
2015 (install): Transform library name before installing it.
2017 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2019 * i960-dis.c (mem): Add HX dcinva instruction.
2021 Support for building as a shared library, based on patches from
2022 Alan Modra <alan@spri.levels.unisa.edu.au>:
2023 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2024 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2025 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2026 * configure: Rebuild.
2027 * Makefile.in (ALLLIBS): New variable.
2028 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2029 (COMMON_SHLIB, SHLINK): New variables.
2030 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2031 (STAGESTUFF): Remove variable.
2032 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2033 (stamp-piclist, piclist): New targets.
2034 ($(SHLIB), $(SHLINK)): New targets.
2035 ($(OFILES)): Depend upon stamp-picdir.
2036 (disassemble.o): Build twice if PICFLAG is set.
2037 (MOSTLYCLEAN): Add pic/*.o.
2038 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2039 (distclean): Remove pic and stamp-picdir.
2040 (install): Install shared libraries.
2041 (stamp-picdir): New target.
2043 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2045 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2046 Print unknown instruction as "unknown", rather than in hex.
2048 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2050 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2052 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2054 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2056 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2058 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2059 when necessary. From Ulrich Drepper
2060 <drepper@myware.rz.uni-karlsruhe.de>.
2062 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2064 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2065 sparc_num_opcodes. Update architecture enum values.
2066 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2067 (sparc_opcode_lookup_arch): New function.
2068 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2069 (sparc_opcodes): Add v9a shutdown insn.
2071 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2073 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2074 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2076 (print_insn_sparc64): Deleted.
2077 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2080 * sparc-opc.c (architecture_pname): Add v9a.
2082 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2084 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2085 incorrectly defined as 0x16 when it should be 0x15.
2086 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2087 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2088 excb (exception barrier) which is defined in the Alpha
2089 Architecture Handbook version 2.
2090 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2091 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2092 disassembled as or, for example.
2094 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2096 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2097 (_print_insn_mips): Change i from int to unsigned int.
2099 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2101 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2102 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2104 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2106 * i386-dis.c: Added Pentium Pro instructions.
2108 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2110 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2113 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2115 * sh-opc.h (sh_nibble_type): Added REG_B.
2116 (sh_arg_type): Added A_REG_B.
2117 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2119 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2121 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2123 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2125 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2127 * Makefile.in (distclean): Remove stamp-h. From Ronald
2128 F. Guilmette <rfg@monkeys.com>.
2130 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2132 From David Mosberger-Tang <davidm@azstarnet.com>:
2133 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2136 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2138 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2139 (sh_table): Added many SH3 opcodes.
2140 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2142 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2144 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2145 (subco,subco.): Mark this PPC, not PPCCOM.
2147 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2149 * configure: Rebuild with autoconf 2.7.
2151 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2153 * configure: Rebuild with autoconf 2.6.
2155 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2157 * configure.in: Sort list of architectures. Accept but do nothing
2158 for alliant, convex, pyramid, romp, and tahoe.
2160 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2162 * a29k-dis.c (print_special): Change num to unsigned int.
2164 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2166 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2169 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2171 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2172 * configure: Rebuilt.
2174 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2176 * configure.in: Add case for bfd_i860_arch.
2177 * configure: Rebuild.
2179 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2181 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2182 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2183 (NEXTDOUBLE): Likewise.
2184 (print_insn_m68k): Don't match fmoveml if there is more than one
2185 register in the list.
2186 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2188 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2190 * m68k-opc.c: Use #W rather than #w.
2191 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2193 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2195 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2196 and likewise for all the dbxx opcodes.
2198 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2200 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2202 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2204 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2205 the VR4100 specific instructions to the mips_opcodes structure.
2207 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2209 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2210 ugly Metrowerks bug in CW6, is fixed in CW7.
2212 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2214 * ppc-opc.c (whole file): Add flags for common/any support.
2216 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2218 * Makefile.in (BISON): Remove macro.
2219 (FLAGS_TO_PASS): Remove BISON.
2221 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2223 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2225 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2226 instructions that take no args by looking at the match mask.
2227 (print_insn_arg): Always print "%" before register names.
2228 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2229 [case '_']: Don't print "@#" before address.
2230 [case 'J']: Use "%s" as format string, not register name.
2231 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2233 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2235 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2238 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2240 From David Mosberger-Tang <davidm@azstarnet.com>
2242 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2243 (alpha_insn_set): added definitions for VAX floating point
2244 instructions (Unix compilers don't generate these, but handcoded
2245 assembly might still use them).
2247 * alpha-dis.c (print_insn_alpha): added support for disassembling
2248 the miscellaneous instructions in the Alpha instruction set.
2250 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2252 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2253 no longer create sysdep.h, sed ppc-opc.c to work around a
2254 serious Metrowerks C bug.
2255 * mpw-make.in: Remove.
2256 * mpw-make.sed: New file, used by mpw-configure to edit
2257 Makefile.in into an MPW makefile.
2259 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2261 * Makefile.in (maintainer-clean): New synonym for realclean.
2263 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2265 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2266 which use '0', '1', and '2' instead. Specify the proper size for
2267 a pmove immediate operand. Correct the pmovefd patterns to be
2268 moves to a register, not from a register.
2269 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2271 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2273 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2274 %psr, %wim, %tbr as F_NOTV9.
2276 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2278 * Makefile.in (Makefile): Just rebuild Makefile when running
2280 (config.h, stamp-h): New targets.
2281 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2282 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2283 rebuilding config.h.
2284 * configure: Rebuild.
2286 * mips-opc.c: Change unaligned loads and stores with "t,A"
2287 operands to use "t,A(b)".
2289 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2291 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2293 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2295 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2296 until 3 instead of until 2.
2298 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2300 * Makefile.in (ALL_CFLAGS): Define.
2301 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2302 (MOSTLYCLEAN): Add config.log.
2303 (distclean): Don't remove config.log.
2304 * configure.in: Substitute HDEFINES.
2305 * configure: Rebuild.
2307 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2309 * sh-opc.h (sh_arg_type): Add F_FR0.
2310 (sh_table, case fmac): Add F_FR0 as first argument.
2312 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2314 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2316 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2318 * sparc-dis.c: Remove all references to NO_V9.
2320 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2322 * aclocal.m4: Just include ../bfd/aclocal.m4.
2323 * configure: Rebuild.
2325 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2327 * sparc-dis.c (X_DISP19): Define.
2328 (print_insn, case 'G'): Use it.
2329 (print_insn, case 'L'): Sign extend displacement.
2331 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2333 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2334 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2335 host_makefile_frag or frags.
2336 * aclocal.m4: New file.
2337 * configure: Rebuild.
2338 * Makefile.in (INSTALL): Set to @INSTALL@.
2339 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2340 (INSTALL_DATA): Set to @INSTALL_DATA@.
2342 (AR_FLAGS): Set to rc rather than qc.
2343 (CC): Define as @CC@.
2344 (CFLAGS): Set to @CFLAGS@.
2345 (@host_makefile_frag@): Remove.
2346 (config.status): Remove dependency upon @frags@.
2348 * configure.in: ../bfd/config.bfd now just sets shell variables.
2349 Use them rather than looking through target Makefile fragments.
2350 * configure: Rebuild.
2352 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2354 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2356 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2358 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2359 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2362 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2363 (lookup_{name,value}): New functions.
2364 (prefetch_table): New static local.
2365 (sparc_{encode,decode}_prefetch): New functions.
2366 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2368 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2370 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2373 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2375 * sh-dis.c: Correct comment on first line of file.
2377 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2379 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2381 * sparc-opc.c (asi, membar): New static locals.
2382 (sparc_{encode,decode}_{asi,membar}): New functions.
2383 (sparc_opcodes, membar insn): Fix.
2384 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2385 Support decoding of membar masks.
2388 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2390 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2392 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2394 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2395 and likewise for the other branches. Add bhs as an alias for bcc,
2396 and likewise for the size variants. Add dbhs as an alias for
2399 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2401 * sh-opc.h (FP sts instructions): Update to match reality.
2403 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2405 * m68k-dis.c: (fpcr_names): Add % before all register names.
2406 (reg_names): Likewise.
2407 (print_insn_arg): Don't explicitly print % before register names.
2408 Add % before register names in static array names. In case 'r',
2409 print data registers as `@(Dn)', not `Dn@'. When printing a
2410 memory address, don't print @# before it.
2411 (print_indexed): Change base_disp and outer_disp from int to
2412 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2413 syntax. Sign extend 8 byte displacement correctly.
2414 (print_base): Print using MIT syntax. Print zpc when appropriate.
2415 Change parameter disp from int to bfd_vma.
2417 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2420 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2422 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2423 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2424 * sh-opc.h (sh_arg_type): Add new operand types.
2425 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2427 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2429 * Makefile.in (distclean): Remove generated file config.h.
2431 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2433 * Makefile.in (distclean): Remove generated file config.h.
2435 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2437 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2439 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2441 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2442 rather than numopcodes. Use m68k_opcodes rather than removed
2443 opcode function. Don't check F_ALIAS.
2444 (print_insn_arg): Change first parameter to be const char *.
2445 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2446 (m68k-opc.o): New target.
2447 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2448 * configure: Rebuild.
2450 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2452 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2453 (opcode_bits, opcode_hash_table): New variables.
2454 (opcodes_initialized): Renamed from opcodes_sorted.
2455 (build_hash_table): New function.
2456 (is_delayed_branch): Use hash table.
2457 (print_insn): Renamed from print_insn_sparc, made static.
2458 Build and use hash table. If !sparc64, ignore sparc64 insns,
2459 and vice-versa if sparc64.
2460 (print_insn_sparc, print_insn_sparc64): New functions.
2461 (compare_opcodes): Move sparc64 opcodes to end.
2462 Print commutative insns with constant second.
2463 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2465 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2467 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2468 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2469 avoids printing a delay slot in a delay slot.
2470 * sh-opc.h (sh_table): Fully bracket last entry.
2472 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2474 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2476 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2478 * configure.in: Get host_makefile_frag from ${srcdir}.
2480 * configure.in: Autoconfiscated. Check for string[s].h. Create
2481 config.h from config.in. Don't set up sysdep.h link.
2482 * sysdep.h: New file.
2483 * configure, config.in: New files, generated from configure.in.
2484 * Makefile.in: Updated to be processed autoconf-style.
2485 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2486 (Makefile): Depend on config.status.
2487 (config.status): New rule.
2488 * configure.bat: Update Makefile substitutions.
2490 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2492 * mips-opc.c (L1): Define.
2493 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2494 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2497 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2499 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2500 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2501 have multiple add units but only a single logical unit.
2503 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2504 shifted by 18, without any insertion or extraction function.
2505 (insert_cr, extract_cr): Remove.
2507 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2509 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2512 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2514 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2515 * sh-opc.h: Add copyright.
2517 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2519 * Makefile.in (crunch-m68k): Delete extra target accidentally
2520 checked in a while ago.
2522 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2524 * sh-opc.h (sh_table): Add SH3 support.
2526 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2528 * sh-opc.h: Added bsrf and braf.
2530 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2532 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2533 bogus [ls]fm{ea,fd} patterns.
2535 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2536 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2537 initialize it from memory. Make function static.
2538 (print_insn_{big,little}_arm): New functions.
2539 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2540 the correct endianness.
2542 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2544 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2547 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2549 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2550 17th, so that it builds again using GCC as the compiler.
2552 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2554 * mips-dis.c (print_insn_little_mips): Cast return value from
2555 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2556 expects an unsigned long, and that might be fewer words of
2557 argument storage (e.g., if bfd_vma is long long on a 32-bit
2559 (print_insn_big_mips): Likewise with bfd_getb32 value.
2560 (_print_insn_mips): Now static.
2562 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2564 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2565 gcc memory hog problem with initializer is fixed.
2567 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2569 Merge in support for Mac MPW as a host.
2570 (Old change descriptions retained for informational value.)
2572 * mpw-config.in (archname): Compute from the config.
2573 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2575 * mpw-config.in (target_arch): Compute from canonical target.
2576 (m68k, mips, powerpc, sparc): Add architectures.
2577 * mpw-make.in (disassemble.c.o): Add.
2578 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2580 * mpw-config.in (BFD_MACHINES): Set to a default value.
2581 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2583 * mpw-make.in (CSEARCH): Add extra-include to search path.
2585 * mpw-config.in (varargs.h): Don't create.
2586 (sysdep.h): Create using forward-include.
2587 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2589 * mpw-config.in: New file, MPW version of configure.in.
2590 * mpw-make.in: New file, MPW version of Makefile.in.
2592 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2594 * alpha-dis.c (print_insn_alpha): Put empty statement after
2597 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2599 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2600 (low_sign_extend): Likewise.
2601 (get_field): Delete unused function.
2602 (set_field, deposit_14, deposit_21): Likewise.
2604 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2606 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2609 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2611 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2613 * alpha-opc.h (OSF_ASMCODE): define
2614 print pal-code names as defined in App C of the
2615 Alpha Architecture Reference Manual
2617 * alpha-dis.c: cleaned up output
2618 print stylized code forms as defined in App A.4.3 of the
2619 Alpha Architecture Reference Manual
2621 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2623 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2625 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2628 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2630 * m68k-dis.c (opcode): New function. Returns address of opcode
2631 table entry given index, even if the opcode table was split to
2632 work around gcc bugs.
2633 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2635 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2636 (reg_names): Now const.
2637 (print_insn_arg): Arrays cacheFieldName and names now const.
2638 (print_indexed): Array scales now const.
2640 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2642 * ppc-opc.c: Sort recently added instructions by minor opcode
2643 number within major opcode number.
2645 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2647 * hppa-dis.c: Include libhppa.h.
2649 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2651 * mips-opc.c: Change dli to use M_DLI, and add dla.
2653 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2655 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2657 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2659 * mips-opc.c: Add r4650 mul instruction.
2661 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2663 * mips-opc.c: Add uld and usd macros for unaligned double load and
2666 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2668 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2669 mfdcr, mtdcr, icbt, iccci.
2671 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2673 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2674 signed char fields to shorts, more portable.
2676 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2678 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2679 char fields as signed chars, since they may have negative values.
2681 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2683 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2684 (mycroft@netbsd.org).
2686 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2688 From "Logg, Ed" <elogg@ea.com>:
2689 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2690 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2693 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2695 * ppc-opc.c: Changes based on patch from David Edelsohn
2696 <edelsohn@mhpcc.edu>.
2697 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2700 (insert_tbr): New static function.
2701 (extract_tbr): New static function.
2702 (XFXFXM_MASK, XFXM): Define.
2703 (XSPRBAT_MASK, XSPRG_MASK): Define.
2704 (powerpc_opcodes): Add instructions to access special registers by
2705 name. Add mtcr and mftbu.
2707 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2709 * mips-opc.c (P3): Define.
2710 (mips_opcodes): Add mad and madu.
2712 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2714 * configure.in: Add W65 support.
2715 * disassemble.c: Likewise.
2716 * w65-opc.h, w65-dis.c: New files.
2718 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2720 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2723 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2725 * mips-opc.c: Add dli as a synonym for li.
2727 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2729 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2730 print something for reserved opcode values, even if it won't
2733 * mips-dis.c (_print_insn_mips): When initializing, shift right
2734 and mask, to avoid sign extension problems on the Alpha.
2736 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2739 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2741 * sh-opc.h (mov.l gbr): Get direction right.
2742 * sh-dis.c (print_insn_shx): New function.
2743 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2744 print opcodes with right byte order.
2746 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2748 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2749 to avoid conflicts with getopt.
2751 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2753 * hppa-dis.c (print_insn_hppa): Read the instruction using
2754 bfd_getb32, so that it works on a little endian or 64 bit host.
2755 Remove unused local variable op.
2757 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2759 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2760 addu does not work correctly if -mips3.
2762 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2764 * a29k-dis.c (print_special): Add special register names defined
2765 on 29030, 29040 and 29050.
2766 (print_insn): Handle new operand type 'I'.
2768 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2770 * Makefile.in (INSTALL): Use top level install.sh script.
2772 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2774 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2775 that it works on a little endian host.
2777 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2779 * configure.in: Use ${config_shell} when running config.bfd.
2781 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2783 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2785 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2787 * a29k-dis.c (print_insn): Print the opcode.
2789 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2791 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2793 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2795 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2797 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2799 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2800 which store a value into memory.
2802 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2804 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2805 * arm-dis.c, arm-opc.h: New files.
2807 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2809 * Makefile.in (ns32k-dis.o): Add dependency.
2810 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2811 string, not as array of chars.
2813 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2815 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2817 * sparc-opc.c: Added sparclite extended FP operations, and
2818 versions of v9 impdep* instructions permitting specification of
2821 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2823 * i960-dis.c (reg_names): Now const.
2824 (struct sparse_tabent): New type, copied from array type in mem
2826 (ctrl): Local static array ctrl_tab now const.
2827 (cobr): Local static array cobr_tab now const.
2828 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2829 static variable mem_tab no longer explicitly initialized. Changed
2830 mem_init to const array of struct sparse_tabent.
2831 (reg): Local static variable reg_tab no longer explicitly
2832 initialized. Changed reg_init to const array of struct
2834 (ea): Local static array scale_tab now const.
2836 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2839 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2841 * configure.bat: the disassember needs to be enabled for
2842 "objdump -d" to work in djgpp.
2844 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2846 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2847 (invalid_float): Enabled general version, doesn't require running
2848 on ns32k host. Changed to take char* argument, and test for
2849 explicitly specified sizes, instead of using sizeof() on host CPU
2851 (INVALID_FLOAT): Cast first argument.
2852 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2853 list_P032, list_M032): Now const.
2854 (optlist, list_search): Made appropriate arguments now point to
2856 (print_insn_arg): Changed static array of one-character-string
2857 pointers into a static const array of characters; fixed sprintf
2858 statement accordingly.
2860 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2862 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2863 from distribution. A ns32k-dis.c from a previous distribution has
2864 been brought up to date and supports the new interface.
2866 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2868 * configure.in: add bfd_ns32k_arch target support.
2870 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2871 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2873 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2875 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2878 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2880 * h8300-dis.c, mips-dis.c: Don't use true and false.
2882 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2884 * configure.in: Change --with-targets to --enable-targets.
2886 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2888 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2889 opcodes to the first instruction with that opcode, to speed
2890 disassembly of large files. From ralphc@pyramid.com (Ralph
2893 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2895 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2897 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2899 * configure.bat: update to latest makefile.in
2901 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2903 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2904 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2905 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2906 slot insn is in a delay slot.
2907 * z8k-opc.h: (resflg): Fix patterns.
2908 * h8500-opc.h Fix CR insn patterns.
2910 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2912 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2913 "cmpl" before POWER versions, so that gas -many uses them.
2915 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2917 * disassemble.c: New file.
2918 * Makefile.in (OFILES): Add disassemble.o.
2919 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2920 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2921 binutils/configure.in.
2923 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2924 opcode being examined.
2926 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2928 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2929 (insert_ral, insert_ram, insert_ras): New functions.
2930 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2931 RAS for store with update.
2933 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2935 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2936 (edelsohn@npac.syr.edu).
2938 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2940 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2943 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2945 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2947 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2949 * ppc-opc.c (powerpc_operands): The signedp field has been
2950 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2951 instead. Add new operand SISIGNOPT.
2952 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2953 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2954 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2957 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2959 * i386-dis.c (struct private): Renamed to dis_private. `private'
2960 is a reserved word for dynix cc.
2962 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2964 * configure.in: Change error message to refer to bfd/config.bfd
2965 rather than bfd/configure.in.
2967 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2969 * ppc-opc.c: Define POWER2 as short alias flag.
2970 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2973 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2975 * i960-dis.c (print_insn_i960): Don't read a second word for
2976 opcodes 0, 1, 2 and 3.
2978 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2980 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2982 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2984 * m68881-ext.c: Removed; no longer used.
2985 * Makefile.in: Changed accordingly.
2987 * m68k-dis.c (ext_format_68881): Don't declare.
2988 (print_insn_m68k): If an instruction uses place 'i', it uses at
2989 least four fixed bytes.
2990 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2991 extended float, convert to double using floatformat_to_double, not
2992 ieee_extended_to_double, and fetch the data before converting it.
2994 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2996 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2997 davidj@ICSI.Berkeley.EDU (David Johnson).
2999 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3001 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3002 PowerPC uses bdnz[l][a].
3004 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3006 * dis-buf.c, i386-dis.c: Include sysdep.h.
3008 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3010 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3012 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3013 by Motorola PowerPC 601 with PPC_OPCODE_601.
3014 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3015 Disassemble Motorola PowerPC 601 instructions as well as normal
3016 PowerPC instructions.
3018 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3020 * i960-dis.c (reg, mem): Just use a static array instead of
3023 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3025 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3026 condition name index if this is for a negated condition.
3028 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3029 Floating point format for 'H' operand is backwards from normal
3030 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3031 operands (fmpyadd and fmpysub), handle bizarre register
3032 translation correctly for single precision format.
3034 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3035 or 'I' operands if the next format specifier is 'M' (fcmp
3036 condition completer).
3038 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3040 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3041 single number giving a bitmask for the MB and ME fields of an M
3042 form instruction. Change NB to accept 32, and turn it into 0;
3043 also turn 0 into 32 when disassembling. Seperated SH from NB.
3044 (insert_mbe, extract_mbe): New functions.
3045 (insert_nb, extract_nb): New functions.
3046 (SC_MASK): Mask out SA and LK bits.
3047 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3048 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3049 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3050 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3051 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3052 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3053 (powerpc_macros): Define table of macro definitions.
3054 (powerpc_num_macros): Define.
3056 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3057 if PPC_OPERAND_NEXT is set.
3059 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3061 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3062 char. Retrieve contents using bfd_getl32 instead of shifting.
3064 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3066 * ppc-opc.c: New file. Opcode table for PowerPC, including
3067 opcodes for POWER (RS/6000).
3068 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3069 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3070 (CFILES): Add ppc-dis.c.
3071 (ppc-dis.o, ppc-opc.o): New targets.
3072 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3074 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3076 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3077 No space before 'u', 'f', or 'N'.
3079 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3081 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3082 farther than we should.
3084 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3086 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3088 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3090 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3092 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3093 needs it, to prevent reading past the end of a section.
3095 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3097 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3098 Removed t,A case for la; always use t,A(b) case.
3100 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3102 From Ted Lemen <mellon@pepper.ncd.com>
3103 * mips-dis.c (print_insn_arg): Handle 'k'.
3104 * mips-opc.c: Make cache use k, not t.
3106 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3108 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3109 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3110 FLOAT_FORMAT_CODE to put out floating point register names.
3112 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3114 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3116 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3118 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3120 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3122 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3123 larger than 32. Moved dsxx32 variants first for disassembler.
3125 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3127 * z8kgen.c, z8k-opc.h: Add full lda information.
3129 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3131 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3132 movb instructions. Any necessary space will be emitted by
3133 the code to handle nullification completers.
3135 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3137 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3139 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3141 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3142 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3144 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3146 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3148 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3150 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3151 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3153 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3155 * m88k-dis.c (m88kdis): comment change. Remove space after
3157 (printop): handle new arg types DEC and XREG for m88110.
3159 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3161 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3162 type for absolute branch addresses. Delete special
3163 "ble" and "be" code in 'W' operand code.
3165 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3167 * mips-opc.c: Set hazard information correctly for branch
3168 likely instructions.
3170 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3172 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3173 info->fprintf_func for printing and info->print_address_func for
3176 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3178 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3180 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3182 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3183 Corrected second case of "b" for disassembler.
3185 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3187 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3188 to BFD swapping routines to correspond to BFD name changes.
3190 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3192 * mips-opc.c: Change div machine instruction to be z,s,t rather
3193 than s,t. Change div macro to be d,v,t rather than d,s,t.
3194 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3195 rem and remu which generates only the corresponding div
3196 instruction. This is for compatibility with the MIPS assembler,
3197 which only generates the simple machine instruction when an
3198 explicit destination of $0 is used.
3199 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3201 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3203 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3204 WR_31 hazard for bal, bgezal, bltzal.
3206 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3208 * hppa-dis.c (print_insn_hppa): Use print function
3209 from within the disassemble_info, not fprintf_filtered.
3211 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3213 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3214 Law, law@cs.utah.edu.)
3216 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3218 * mips-opc.c ("absu"): Removed.
3221 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3223 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3224 Changed hazard information to distinguish between memory load
3225 delays and coprocessor load delays.
3227 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3229 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3231 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3233 * configure.in: Don't pass cpu to config.bfd.
3235 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3237 * m88k-dis.c (m88kdis): Make class unsigned.
3239 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3241 * alpha-dis.c (print_insn_alpha): One branch format case was
3242 missing the instruction name.
3244 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3246 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3247 Add the arch-specific auxiliary files.
3248 (OFILES): Remove the arch-specific auxiliary files
3249 and use BFD_MACHINES instead of DIS_LIBS.
3250 * configure.in: Set BFD_MACHINES based on --with-targets option.
3252 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3254 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3257 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3259 * sparc-opc.c: Change CONST to const to deal with gcc
3260 -Dconst=__const -traditional.
3262 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3264 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3265 coprocessor instructions out of #if 0, and made them use new
3268 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3270 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3272 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3274 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3275 instruction, for use by the disassembler.
3277 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3278 hand-coded sign extensions that depended on 32-bit host ints.
3279 FIXME, we still depend on big-endian host bitfield ordering.
3280 (sparc_print_insn): Set the insn_info_valid field, and the
3281 other fields that describe the instruction being printed.
3283 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3285 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3286 `jmp' instead of just one of them.
3288 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3290 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3291 (fput_fp_reg_r): Renamed from fput_reg_r.
3292 (fput_fp_reg): New function.
3293 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3295 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3297 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3299 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3301 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3303 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3304 don't output a space.
3306 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3308 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3310 * mips-opc.c: New file, containing opcode table from
3311 ../include/opcode/mips.h.
3312 * Makefile.in: Add it.
3314 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3316 * m88k-dis.c: New file, moved in from gdb and changed to use the
3317 new dis-asm.h disassembler interface.
3318 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3319 (m88k-dis.o): New target.
3321 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3323 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3324 argument string const char * to correspond to opcode/mips.h.
3326 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3328 * mips-dis.c: Updated to account for name changes in new version
3330 * Makefile.in: Added header file dependencies.
3332 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3334 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3336 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3338 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3339 extend, rather than shifts.
3341 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3343 * Makefile.in: Undo 15 June change.
3345 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3347 * m68k-dis.c (print_insn_arg): Change return value to byte count
3349 * m68k-dis.c: Re-write to detect invalid operands before
3350 printing anything, so we can handle this the same way we
3351 handle invalid opcodes.
3353 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3355 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3357 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3359 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3362 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3364 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3366 * configure.in: Do make sysdep.h link.
3367 * Makefile.in: Search ../include. Don't search ../bfd.
3369 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3371 Changes from Jeff Law, law@cs.utah.edu:
3372 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3373 Do not print a space before the completers specified by
3376 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3378 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3379 defined, since gdb has been fixed.
3381 Changes from Jeff Law, law@cs.utah.edu:
3382 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3383 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3384 be a *disassemble_info, not a *FILE.
3385 * hppa-dis.c: Support 'd', '!', and 'a'.
3386 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3387 * hppa-dis.c: Delete cases which are no longer needed.
3389 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3391 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3393 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3395 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3398 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3400 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3401 * configure.in: No longer need to configure to get sysdep.h.
3403 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3405 * Patches from Jeffrey Law <law@cs.utah.edu>.
3406 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3407 templates for 1.1 FP computational instructions.
3409 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3411 * h8500-dis.c (print_insn_h8500): Address argument is type
3413 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3416 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3417 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3419 * sparc-dis.c (compare_opcodes): Move static declaration to
3422 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3424 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3425 instruction, remove unimp hack from 'l' argument.
3427 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3429 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3432 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3434 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3435 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3438 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3440 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3441 arrays of string pointers to 2-d arrays of chars, to save
3444 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3446 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3447 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3449 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3451 * hppa-dis.c: New file from Utah, adapted to new disassembler
3453 * Makefile.in: Include it.
3455 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3457 * sh-dis.c, sh-opc.h: New files.
3459 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3461 * alpha-dis.c, alpha-opc.h: New files.
3463 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3465 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3468 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3470 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3472 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3474 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3477 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3479 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3480 and double percent signs a few places.
3482 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3484 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3485 Use info->print_address_func not print_address.
3487 * dis-buf.c (generic_print_address): New function.
3489 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3491 * Makefile.in: Add sparc-dis.c.
3492 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3494 Add `add' instruction to the set that get checked
3495 for a preceding `sethi' in order to print an absolute address.
3496 * (print_insn): Disassembly prefers real instructions.
3497 (is_delayed_branch): Speed up.
3498 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3499 Still missing some float ops, and needs testing.
3500 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3501 F_ALIAS. Use printf, not fprintf, when not passing a file
3503 (compare_opcodes): Check that identical instructions have
3504 identical opcodes, complain otherwise.
3507 * Include reg_names.
3509 Use dis-asm.h/read_memory_func interface.
3511 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3513 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3514 deliberately return non-zero to setjmp from longjmp. Otherwise
3515 this code fails to compile.
3517 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3519 * m68k-dis.c: Fix prototype for fetch_arg().
3521 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3523 * dis-buf.c: New file, for new read_memory_func interface.
3524 Makefile.in (OFILES): Include it.
3525 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3526 Use new read_memory_func interface.
3528 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3530 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3531 * h8500-opc.h: Fix couple of opcodes.
3533 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3535 * Makefile.in: add dvi & installcheck targets
3537 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3539 * Makefile.in: Update for h8500-dis.c.
3541 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3543 * h8500-dis.c, h8500-opc.h: New files
3545 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3547 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3548 ../include/dis-asm.h.
3549 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3550 and ../gdb/m68k-pinsn.c).
3551 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3552 and ../gdb/i386-pinsn.c).
3553 * m68881-ext.c: New file. Moved definition of
3554 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3555 * Makefile.in: Adjust for new files.
3556 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3557 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3558 can be dis-assembled.
3560 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3562 * mips-dis.c (print_insn_arg): Now returns void.
3564 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3566 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3567 files that use the macros.
3569 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3571 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3572 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3573 (CFILES): Added mips-dis.c.
3575 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3577 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3578 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3580 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3582 * Makefile.in: Improve *clean rules.
3583 * configure.in: Allow a default host.
3585 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3587 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3588 files include other sysdep files
3590 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3592 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3594 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3596 * configure.in: For host support, use ../bfd/configure.host
3597 so it stays in sync with the ../bfd/hosts database.
3599 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3601 * configure.in: use cpu-vendor-os triple instead of nested cases
3603 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3605 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3606 *always* the wrong one.
3608 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3610 * z8kgen.c: added copyright info
3612 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3614 * z8k-dis.c (unparse_instr): prettier tabs
3615 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3617 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3619 * configure.in: Add ncr* configuration.
3620 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3621 picayune ANSI compilers happy.
3623 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3625 * configure.in (i386): Make i386 and i486 synonymous for now.
3626 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3628 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3630 * Makefile.in (install): Fix typo.
3632 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3634 * Makefile.in (make): Remove obsolete crud.
3635 (sparc-opc.o): Avoid Sun Make VPATH bug.
3637 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3639 * Makefile.in: since there are no SUBDIRS, remove rule and
3640 references of subdir_do.
3642 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3644 * Makefile.in (install): Get the library name right here too.
3645 Don't install bfd.h, since it's unrelated to this library. No
3646 subdirs to recurse into, either.
3647 (CFILES): The source file has a .c suffix, not .o.
3649 * sparc-opc.c: New file, moved from BFD.
3650 * Makefile.in (OFILES): Build it.
3652 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3654 * z8k-dis.c: fixed forward refferences of some declarations.
3656 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3658 * Makefile.in: get the name of the library right
3660 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3662 * z8k-dis.c: knows how to disassemble z8k stuff
3663 * z8k-opc.h: new file full of z8000 opcodes
3667 version-control: never