opcodes/ChangeLog

   1 2000-05-21  Nick Clifton  <nickc@cygnus.com>
   2
   3         * Makefile.am (LIBIBERTY): Define.
   4
   5 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
   6
   7         * fr30-desc.h: Partially regenerated to account for changed
   8         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
   9         * m32r-desc.h: Ditto.
  10
  11 2000-05-15  Nick Clifton  <nickc@cygnus.com>
  12
  13         * arm-opc.h: Use upper case for flasg in MSR and MRS
  14         instructions.  Allow any bit to be set in the field_mask of
  15         the MSR instruction.
  16
  17         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
  18         field_mask of an MSR instruction.
  19
  20 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
  21
  22         * arm-opc.c: Disassembly of thumb ldsb/ldsh
  23         instructions changed to ldrsb/ldrsh.
  24
  25 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
  26
  27         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
  28         target addresses for 'jal' and 'j'.
  29
  30 2000-05-10  Geoff Keating  <geoffk@cygnus.com>
  31
  32         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
  33         also available in common mode when powerpc syntax is being used.
  34
  35 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
  36
  37         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
  38         (dummy_print_address): Ditto.
  39
  40 2000-05-04  Timothy Wall  <twall@cygnus.com>
  41
  42         * tic54x-opc.c: New.
  43         * tic54x-dis.c: New.
  44         * disassemble.c (disassembler): Add ARCH_tic54x.
  45         * configure.in: Added tic54x target.
  46         * configure: Ditto.
  47         * Makefile.am: Add tic54x dependencies.
  48         * Makefile.in: Ditto.
  49
  50 2000-05-03  J.T. Conklin  <jtc@redback.com>
  51
  52         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
  53         vector unit operands.
  54         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
  55         unit instruction formats.
  56         (PPCVEC): New macro, mask for vector instructions.
  57         (powerpc_operands): Add table entries for above operand types.
  58         (powerpc_opcodes): Add table entries for vector instructions.
  59
  60         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
  61         (print_insn_little_powerpc): Likewise.
  62         (print_insn_powerpc): Prepend 'v' when printing vector registers.
  63
  64 Sun Apr 23 17:54:14 2000  Denis Chertykov  <denisc@overta.ru>
  65
  66         * avr-dis.c (reg_fmul_d): New. Extract destination register from
  67         FMUL instruction.
  68         (reg_fmul_r): New. Extract source register from FMUL instruction.
  69         (reg_muls_d): New. Extract destination register from MULS instruction.
  70         (reg_muls_r): New. Extract source register from MULS instruction.
  71         (reg_movw_d): New. Extract destination register from MOVW instruction.
  72         (reg_movw_r): New. Extract source register from MOVW instruction.
  73         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
  74         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
  75
  76 Mon Apr 24 15:21:35 2000  Clinton Popetz  <cpopetz@cygnus.com>
  77
  78         * configure.in: Add bfd_powerpc_64_arch.
  79         * disassemble.c (disassembler): Use print_insn_big_powerpc for
  80         64 bit code.
  81
  82 2000-04-24  Nick Clifton  <nickc@cygnus.com>
  83
  84         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
  85         field.
  86
  87 2000-04-22  Timothy Wall  <twall@cygnus.com>
  88
  89         * ia64-gen.c (general): Add an ordered table of primary
  90         opcode names, as well as priority fields to disassembly data
  91         structures to enforce a preferred disassembly format based on the
  92         ordering of the opcode tables.
  93         (load_insn_classes): Show a useful message if IC tables are missing.
  94         (load_depfile): Ditto.
  95         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
  96         distinguish preferred disassembly.
  97         * ia64-opc-f.c: Reorder some insn for preferred disassembly
  98         format.  Fix incorrect flag on fma.s/fma.s.s0.
  99         * ia64-opc.c: Scan *all* disassembly matches and use the one with
 100         the highest priority.
 101         * ia64-opc-b.c: Use more abbreviations.
 102         * ia64-asmtab.c: Regenerate.
 103
 104 Fri Apr 21 16:03:39 2000  Jason Eckhardt  <jle@cygnus.com>
 105
 106         * hppa-dis.c (extract_16): New function.
 107         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
 108         new operand types l,y,&,fe,fE,fx.
 109
 110 Fri Apr 21 13:20:53 2000  Richard Henderson  <rth@cygnus.com>
 111                           David Mosberger  <davidm@hpl.hp.com>
 112                           Timothy Wall <twall@cygnus.com>
 113                           Bob Manson  <manson@charmed.cygnus.com>
 114                           Jim Wilson  <wilson@cygnus.com>
 115
 116         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
 117         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
 118         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
 119         ia64-asmtab.c.
 120         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
 121         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
 122         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
 123         * Makefile.in: Rebuild.
 124         * configure Rebuild.
 125         * configure.in (bfd_ia64_arch): New target.
 126         * disassemble.c (ARCH_ia64): Define.
 127         (disassembler): Support ARCH_ia64.
 128         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
 129         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
 130         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
 131         ia64-war.tbl, ia64-waw.tbl): New files.
 132
 133 2000-04-20  Alexandre Oliva  <aoliva@cygnus.com>
 134
 135         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
 136         (disassemble): Use them.
 137
 138 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
 139
 140         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
 141         * Makefile.am: Update dependencies.
 142         * Makefile.in: Regenerate.
 143
 144 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 145
 146         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
 147         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
 148         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
 149         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
 150         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
 151         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
 152         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
 153         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
 154         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
 155         ansidecl.h as sysdep.h includes it.
 156
 157 Fri Apr  7 15:56:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 158
 159         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
 160         --enable-build-warnings option.
 161         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
 162         * Makefile.in, configure: Re-generate.
 163
 164 Wed Apr  5 22:28:18 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 165
 166         * sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
 167         stc GBR,@-<REG_N> is available for arch_sh1_up.
 168         Group parallel processing insn with identical mnemonics together.
 169         Make three-operand psha / pshl come first.
 170
 171 Wed Apr  5 22:05:40 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 172
 173         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
 174         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
 175         (sh_arg_type): Add A_PC.
 176         (sh_table): Update entries using immediates.  Add repeat.
 177         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
 178         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
 179
 180 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
 181
 182         * po/opcodes.pot: Regenerate.
 183
 184         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
 185         (DEP): Quote when passing vars to sub-make.  Add warning message
 186         to end.
 187         (DEP1): Rewrite for "gcc -MM".
 188         (CLEANFILES): Add DEP2.
 189         Update dependencies.
 190         * Makefile.in: Regenerate.
 191
 192 2000-04-03  Denis Chertykov  <denisc@overta.ru>
 193
 194         * avr-dis.c: Syntax cleanup.
 195         (add0fff): Print the pc relative address as a signed number.
 196         (add03f8): Likewise.
 197
 198 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
 199
 200         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
 201         the parameter ATTRIBUTE_UNUSED.
 202         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
 203
 204 2000-04-01  Alexandre Oliva  <aoliva@cygnus.com>
 205
 206         * m10300-opc.c: SP-based offsets are always unsigned.
 207
 208 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
 209
 210         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
 211         [branch always] instead of "undefined".
 212
 213 2000-03-27  Nick Clifton  <nickc@cygnus.com>
 214
 215         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
 216         short instructions, from end of list of long instructions.
 217
 218 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
 219
 220         * Makefile.am (CFILES): Add avr-dis.c.
 221         (ALL_MACHINES): Add avr-dis.lo.
 222
 223 2000-03-27  Alan Modra  <alan@linuxcare.com>
 224
 225         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
 226         truncate integers.
 227         (print_insn_avr): Call function via pointer in K&R compatible way.
 228         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
 229         add0fff, add03f8): Convert to old style function declaration and
 230         add prototype.
 231         (avrdis_opcode): Add prototype.
 232
 233 2000-03-27  Denis Chertykov  <denisc@overta.ru>
 234
 235         * avr-dis.c: New file.  AVR disassembler.
 236         * configure.in (bfd_avr_arch): New architecture support.
 237         * disassemble.c: Likewise.
 238         * configure: Regenerate.
 239
 240 Mon Mar  6 19:52:05 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 241
 242         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
 243
 244 2000-03-02  J"orn Rennecke <amylaar@cygnus.co.uk>
 245
 246         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
 247         flag to determine if operand is pc-relative.
 248         * d30v-opc.c:
 249         (d30v_format_table):
 250         (REL6S3): Renamed from IMM6S3.
 251         Added flag OPERAND_PCREL.
 252         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
 253         added flag OPERAND_PCREL.
 254         (IMM12S3U): Replaced with REL12S3.
 255         (SHORT_D2, LONG_D): Delay target is pc-relative.
 256         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
 257         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
 258         using the REL* operands.
 259         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
 260         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
 261         LONG_Db, using REL* operands.
 262         (SHORT_U, SHORT_A5S): Removed stray alternatives.
 263         (d30v_opcode_table): Use new *r formats.
 264
 265 2000-02-28  Nick Clifton  <nickc@cygnus.com>
 266
 267         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
 268         'signed_overflow_ok_p'.
 269
 270 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
 271
 272         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
 273         name of the libtool directory.
 274         * Makefile.in: Rebuild.
 275
 276 2000-02-24  Nick Clifton  <nickc@cygnus.com>
 277
 278         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
 279         (cgen_clear_signed_overflow_ok): New function.
 280         (cgen_signed_overflow_ok_p): New function.
 281
 282 2000-02-23  Andrew Haley  <aph@cygnus.com>
 283
 284         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
 285         m32r-ibld.c,m32r-opc.h: Rebuild.
 286
 287 2000-02-23  Linas Vepstas <linas@linas.org>
 288
 289         * i370-dis.c, i370-opc.c: New.
 290
 291         * disassemble.c (ARCH_i370): Define.
 292         (disassembler): Handle it.
 293
 294         * Makefile.am: Add support for Linux/IBM 370.
 295         * configure.in: Likewise.
 296
 297         * Makefile.in: Regenerate.
 298         * configure: Likewise.
 299
 300 2000-02-22  Chandra Chavva   <cchavva@cygnus.com>
 301
 302         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
 303         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
 304         procedure.
 305
 306 1999-12-30  Andrew Haley  <aph@cygnus.com>
 307
 308         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
 309         force gp32 to zero.
 310         * mips-opc.c (G6): New define.
 311         (mips_builtin_op): Add "move" definition for -gp32.
 312
 313 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
 314
 315         From Grant Erickson <gerickso@Brocade.COM>:
 316         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
 317
 318 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
 319
 320         * dis-buf.c (buffer_read_memory): Change `length' param and all int
 321         vars to unsigned.
 322
 323 Thu Feb 17 00:18:12 2000  J"orn Rennecke <amylaar@cygnus.co.uk>
 324
 325         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
 326         (print_insn_ppi): Likewise.
 327         (print_insn_shx): Use info->mach to select appropriate insn set.
 328         Add support for sh-dsp.  Remove FD_REG_N support.
 329         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
 330         (sh_arg_type): Likewise.  Remove FD_REG_N.
 331         (sh_dsp_reg_nums): New enum.
 332         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
 333         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
 334         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
 335         (arch_sh3_dsp_up): Likewise.
 336         (sh_opcode_info): New field: arch.
 337         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
 338         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
 339
 340 2000-02-14  Fernando Nasser  <fnasser@totem.to.cygnus.com>
 341
 342         * arm-dis.c: Change flavor name from atpcs-special to
 343         special-atpcs to prevent name conflict in gdb.
 344         (get_arm_regname_num_options, set_arm_regname_option,
 345         get_arm_regnames): New functions.  API to access the several
 346         flavor of register names.  Note: Used by gdb.
 347         (print_insn_thumb): Use the register name entry from the currently
 348         selected flavor for LR and PC.
 349
 350 2000-02-10  Nick Clifton  <nickc@cygnus.com>
 351
 352         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
 353         classes.
 354         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
 355         "mulsh.h" instructions.
 356         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
 357         classes.
 358         (print_insn_mcore): Add support for little endian targets.
 359         Add support for MULSH and OPSR classes.
 360
 361 2000-02-07  Nick Clifton  <nickc@cygnus.com>
 362
 363         * arm-dis.c (parse_arm_diassembler_option): Rename again.
 364         Previous delat did not take.
 365
 366 2000-02-03  Timothy Wall  <twall@redhat.com>
 367
 368         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
 369         to adjust target address bounds checking and calculate the
 370         appropriate octet offset into data.
 371
 372 2000-01-27  Nick Clifton  <nickc@redhat.com>
 373
 374         * arm-dis.c: (parse_disassembler_option): Rename to
 375         parse_arm_disassembler_option and allow to be exported.
 376
 377         * disassemble.c (disassembler_usage): New function: Print out any
 378         target specific disassembler options.
 379         Call arm_disassembler_options() if the ARM architecture is being
 380         supported.
 381
 382         * arm-dis.c (NUM_ELEM): Define this macro if not already
 383         defined.
 384         (arm_regname): New struct type for ARM register names.
 385         (arm_toggle_regnames): Delete.
 386         (parse_disassembler_option): Use register name structure.
 387         (print_insn): New function: Combines duplicate code found in
 388         print_insn_big_arm and print_insn_little_arm.
 389         (print_insn_big_arm): Call print_insn.
 390         (print_insn_little_arm): Call print_insn.
 391         (print_arm_disassembler_options): Display list of supported,
 392         ARM specific disassembler options.
 393
 394 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
 395
 396         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
 397         ARM_STT_16BIT flag as Thumb code symbols.
 398
 399         * arm-dis.c (printf_insn_little_arm): Ditto.
 400
 401 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
 402
 403         * arm-dis.c (printf_insn_thumb): Prevent double dumping
 404         of raw thumb instructions.
 405
 406 2000-01-20  Nick Clifton  <nickc@cygnus.com>
 407
 408         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
 409
 410 2000-01-03  Nick Clifton  <nickc@cygnus.com>
 411
 412         * arm-dis.c (streq): New macro.
 413         (strneq): New macro.
 414         (force_thumb): ew local variable.
 415         (parse_disassembler_option): New function: Parse a single, ARM
 416         specific disassembler command line switch.
 417         (parse_disassembler_option): Call parse_disassembler_option to
 418         parse individual command line switches.
 419         (print_insn_big_arm): Check force_thumb.
 420         (print_insn_little_arm): Check force_thumb.
 421
 422 1999-12-27  Alan Modra  <alan@spri.levels.unisa.edu.au>
 423
 424         * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
 425
 426 Wed Dec  1 03:34:53 1999  Jeffrey A Law  (law@cygnus.com)
 427
 428         * m10300-opc.c, m10300-dis.c: Add am33 support.
 429
 430 Wed Nov 24 20:29:58 1999  Jeffrey A Law  (law@cygnus.com)
 431
 432         * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
 433         (print_insn_hppa): Handle 'B' operand.
 434
 435 1999-11-22  Nick Clifton  <nickc@cygnus.com>
 436
 437         * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
 438
 439 1999-11-18  Gavin Romig-Koch  <gavin@cygnus.com>
 440
 441         * mips-opc.c (I5): New.
 442         (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
 443         madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
 444         pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
 445
 446 Mon Nov 15 19:34:58 1999  Donald Lindsay  <dlindsay@cygnus.com>
 447
 448         * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
 449         * arm-opc.h (print_insn_arm): Added comment documenting
 450         the 'X' format just added to arm-dis.c.
 451
 452 1999-11-15  Gavin Romig-Koch  <gavin@cygnus.com>
 453
 454         * mips-opc.c (la): Create a version that just uses addiu directly.
 455         (dla): Expand to daddiu if possible.
 456
 457 1999-11-11  Nick Clifton  <nickc@cygnus.com>
 458
 459         * mips-opc.c: Add ssnop pattern.
 460
 461 1999-11-01  Gavin Romig-Koch  <gavin@cygnus.com>
 462
 463         * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
 464
 465 1999-10-29  Nick Clifton  <nickc@cygnus.com>
 466
 467         * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
 468         (d30v_format_tab): Define the SHORT_AR format.
 469
 470 1999-10-28  Nick Clifton  <nickc@cygnus.com>
 471
 472         * mcore-dis.c: Remove spurious code introduced in previous delta.
 473
 474 1999-10-27  Scott Bambrough  <scottb@netwinder.org>
 475
 476         * arm-dis.c: Include sysdep.h to prevent compile time warnings.
 477
 478 1999-10-18  Michael Meissner  <meissner@cygnus.com>
 479
 480         * alpha-opc.c (alpha_operands): Fill in missing initializer.
 481         (alpha_num_operands): Convert to unsigned.
 482         (alpha_num_opcodes): Ditto.
 483         (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
 484         (insert_rca): Ditto.
 485         (insert_za): Ditto.
 486         (insert_zb): Ditto.
 487         (insert_zc): Ditto.
 488         (extract_bdisp): Ditto.
 489         (extract_jhint): Ditto.
 490         (extract_ev6hwjhint): Ditto.
 491
 492 Sun Oct 10 01:48:01 1999  Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
 493
 494         * hppa-dis.c (print_insn_hppa):  Add new codes 'cc', 'cd', 'cC',
 495         'co', '@'.
 496
 497         * hppa-dis.c (print_insn_hppa): Removed unused args.  Fix '?W'.
 498
 499         * hppa-dis.c (print_insn_hppa):  Implement codes "?N", "?Q".
 500
 501 Thu Oct  7 00:12:43 MDT 1999    Diego Novillo <dnovillo@cygnus.com>
 502
 503         * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
 504         rac/rachi instructions.
 505         (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
 506         slae, st and st2w.
 507
 508 1999-10-04  Doug Evans  <devans@casey.cygnus.com>
 509
 510         * fr30-asm.c,fr30-desc.h: Rebuild.
 511         * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild.  Add m32rx support.
 512         * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
 513
 514 1999-09-29  Nick Clifton  <nickc@cygnus.com>
 515
 516         * sh-opc.h: Fix bit patterns for several load and store
 517         instructions.
 518
 519 Thu Sep 23 08:27:20 1999  Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
 520
 521         * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
 522         cleaner code using completer prefixes.  Add 'Y'.
 523
 524 Sun Sep 19 10:41:27 1999  Jeffrey A Law  (law@cygnus.com)
 525
 526         * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
 527
 528         * hppa-dis.c (extract_22): New function.
 529
 530         * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
 531
 532         * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
 533
 534         * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
 535
 536         * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
 537
 538         * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
 539
 540         * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
 541
 542         * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
 543
 544         * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
 545
 546         * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
 547
 548 Sat Sep 18 11:36:12 1999  Jeffrey A Law  (law@cygnus.com)
 549
 550         * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
 551
 552         * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
 553         operand.
 554
 555         * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
 556
 557         * hppa-dis.c: (print_insn_hppa): Add missing break after
 558         FP register case.
 559
 560         * hppa-dis.c: Finish constifying various completers, register
 561         names, etc etc.
 562
 563 1999-09-14  Michael Meissner  <meissner@cygnus.com>
 564
 565         * configure.in (Canonicalization of target names): Remove adding
 566         ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
 567         generates $ac_config_sub with a ${CONFIG_SHELL} already.
 568         * configure: Regenerate.
 569
 570 Tue Sep  7 13:50:32 1999  Jeffrey A Law  (law@cygnus.com)
 571
 572         * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
 573
 574         * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
 575
 576 1999-09-07  Nick Clifton  <nickc@cygnus.com>
 577
 578         * sh-opc.h: Add mulu.w and muls.w patterns.  These are the correct
 579         names for the mulu and muls patterns.
 580
 581 1999-09-04  Steve Chamberlain  <sac@pobox.com>
 582
 583         * pj-opc.c: New file.
 584         * pj-dis.c: New file.
 585         * disassemble.c (disassembler): Handle bfd_arch_pj.
 586         * configure.in: Handle bfd_pj_arch.
 587         * Makefile.am: Rebuild dependencies.
 588         (CFILES): Add pj-dis.c and pj-opc.c.
 589         (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
 590         * configure, Makefile.in: Rebuild.
 591
 592 1999-09-04  H.J. Lu  <hjl@gnu.org>
 593
 594         * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
 595
 596 Mon Aug 30 18:56:14 1999  Richard Henderson  <rth@cygnus.com>
 597
 598         * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
 599
 600 1999-08-04  Doug Evans  <devans@casey.cygnus.com>
 601
 602         * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 603         * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 604         * m32r-opinst.c: Rebuild.
 605
 606 Sat Aug 28 00:27:24 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 607
 608         * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'.  Prefix float
 609         register args by 'f'.
 610
 611         * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
 612
 613         * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
 614         extract_10U_store):  New.
 615         (print_insn_hppa):  Add new completers.
 616
 617         * hppa-dis.c (signed_unsigned_names,mix_half_names,
 618         saturation_names):  New.
 619         (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
 620
 621         * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
 622
 623         * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
 624
 625         * hppa-dis.c (print_insn_hppa):  Look at next arg instead of bits
 626         to decide to print a space.
 627
 628 1999-08-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
 629
 630         * i386-dis.c: Add AMD athlon instruction support.
 631
 632 1999-08-10  Ian Lance Taylor  <ian@zembu.com>
 633
 634         From Wally Iimura <iimura@microunity.com>:
 635         * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
 636         overflow at end of address space.
 637         (generic_print_address): Use sprintf_vma.
 638
 639 1999-08-08  Ian Lance Taylor  <ian@zembu.com>
 640
 641         * Makefile.am: Rename .dep* files to DEP*.  Change DEP variable to
 642         MKDEP.  Rebuild dependencies.
 643         * Makefile.in: Rebuild.
 644
 645 Fri Aug  6 09:46:35 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 646
 647         * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
 648         add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
 649         unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
 650         (print_insn_hppa): Add 64 bit condition completers.
 651
 652 Thu Aug  5 16:59:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 653
 654         * hppa-dis.c (print_insn_hppa): Change condition args to use
 655         '?' prefix.
 656
 657 Wed Jul 28 04:33:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 658
 659         * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
 660         code.
 661
 662 1999-07-21  Ian Lance Taylor  <ian@zembu.com>
 663
 664         From Mark Elbrecht:
 665         * configure.bat: Remove; obsolete.
 666
 667 1999-07-11  Ian Lance Taylor  <ian@zembu.com>
 668
 669         * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
 670         (generic_strcat_address): Add cast to avoid warning.
 671         * i386-dis.c: Initialize all structure fields to avoid warnings.
 672         Add ATTRIBUTE_UNUSED as appropriate.
 673
 674 1999-07-08  Jakub Jelinek  <jj@ultra.linux.cz>
 675
 676         * sparc-dis.c (print_insn_sparc): Differentiate between
 677         addition and oring when guessing symbol for comment.
 678
 679 1999-07-05  Nick Clifton  <nickc@cygnus.com>
 680
 681         * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
 682         constant.
 683
 684 1999-06-23  Alan Modra  <alan@spri.levels.unisa.edu.au>
 685
 686         * i386-dis.c: Mention intel mode specials in macro char comment.
 687
 688 1999-06-21  Ian Lance Taylor  <ian@zembu.com>
 689
 690         * alpha-dis.c: Don't include <stdlib.h>.
 691         * arm-dis.c: Include "sysdep.h".
 692         * tic30-dis.c: Don't include <stdlib.h> or <string.h>.  Include
 693         "sysdep.h".
 694         * Makefile.am: Rebuild dependencies.
 695         * Makefile.in: Rebuild.
 696
 697 1999-06-16  Nick Clifton  <nickc@cygnus.com>
 698
 699         * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
 700         SWIs.
 701
 702 1999-06-14  Nick Clifton  <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
 703
 704         * arm-dis.c (arm_regnames): Turn into a pointer to a register
 705         name set.
 706         (arm_regnames_standard): New variable: Array of ARM register
 707         names according to ARM instruction set nomenclature.
 708         (arm_regnames_apcs): New variable: Array of ARM register names
 709         according to ARM Procedure Call Standard.
 710         (arm_regnames_raw): New variable: Array of ARM register names
 711         using just 'r' and the register number.
 712         (arm_toggle_regnames): New function: Toggle the chosen register set
 713         naming scheme.
 714         (parse_disassembler_options): New function: Parse any target
 715         disassembler command line options.
 716         (print_insn_big_arm): Call parse_disassembler_options if any
 717         are defined.
 718         (print_insn_little_arm): Call parse_disassembler_options if any
 719         are defined.
 720
 721 1999-06-13  Ian Lance Taylor  <ian@zembu.com>
 722
 723         * i386-dis.c (FWAIT_OPCODE): Define.
 724         (used_prefixes): New static variable.
 725         (fetch_data): Don't print an error message if we have already
 726         fetched some bytes successfully.
 727         (ckprefix): Clear used_prefixes.  Use FWAIT_OPCODE, not 0x9b.
 728         (prefix_name): New static function.
 729         (print_insn_i386): If setjmp fails, indicating a data error, but
 730         we have managed to fetch some bytes, print the first one as a
 731         prefix or a .byte pseudo-op.  If fwait is followed by a non
 732         floating point instruction, print the first prefix.  Set
 733         used_prefixes when prefixes are used.  If any prefixes were not
 734         used after disassembling the instruction, print the first prefix
 735         instead of printing the instruction.
 736         (putop): Set used_prefixes when prefixes are used.
 737         (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
 738         (OP_DIR, OP_SIMD_Suffix): Likewise.
 739
 740 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
 741
 742         * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
 743         Support signx %reg, clruw %reg.
 744
 745 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
 746
 747         * sparc-opc.c: Add aliases Solaris as supports.
 748
 749 Mon Jun  7 12:04:52 1999  Andreas Schwab  <schwab@issan.cs.uni-dortmund.de>
 750
 751         * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
 752         * Makefile.in: Regenerated.
 753
 754 1999-06-03  Philip Blundell  <philb@gnu.org>
 755
 756         * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
 757         when target is PC-relative.
 758
 759 1999-05-28  Linus Nordberg  <linus.nordberg@canit.se>
 760
 761         * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC.  Add MACM/MSACM.  Add
 762         MOVE MACSR,CCR.
 763
 764         * m68k-dis.c (fetch_arg): Add places `n', `o'.
 765
 766         * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
 767         Add mcf5206e to appropriate instructions.
 768         Add alias for MAC, MSAC.
 769
 770         * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
 771         `N'.
 772
 773         * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
 774         macw, remsl, remul for mcf5307.  Change mcf5200 --> mcf.
 775
 776         * m68k-dis.c: Add format `u' and places `h', `m', `M'.
 777
 778 1999-05-18  Alan Modra  <alan@spri.levels.unisa.edu.au>
 779
 780         * i386-dis.c (Ed): Define.
 781         (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
 782         (Rw): Remove.
 783         (OP_rm): Rename to OP_Rd.
 784         (ONE): Remove.
 785         (OP_ONE): Remove.
 786         (putop): Add const to template and p.
 787         (print_insn_x86): Delete.
 788         (print_insn_i386): Merge old function print_insn_x86.  Add const
 789         to dp.
 790         (struct dis386): Add const to name.
 791         (dis386_att, dis386_intel): Add const.
 792         (dis386_twobyte_att, dis386_twobyte_intel): Add const.
 793         (names32, names16, names8, names_seg, index16): Add const.
 794         (grps, prefix_user_table, float_reg): Add const.
 795         (float_mem_att, float_mem_intel): Add const.
 796         (oappend): Add const to s.
 797         (OP_REG): Add const to s.
 798         (ptr_reg): Add const to s.
 799         (dofloat): Add const to dp.
 800         (OP_C): Don't skip modrm, it's now done in OP_Rd.
 801         (OP_D): Ditto.
 802         (OP_T): Ditto.
 803         (OP_Rd): Check for valid mod.  Call Op_E to print.
 804         (OP_E): Handle d_mode arg.  Check for bad sfence,lea,lds etc.
 805         (OP_MS): Check for valid mod.  Call Op_EM to print.
 806         (OP_3DNowSuffix): Set obufp and use oappend rather than
 807         strcat.  Call BadOp() for errors.
 808         (OP_SIMD_Suffix): Likewise.
 809         (BadOp): New function.
 810
 811 1999-05-12  Alan Modra  <alan@spri.levels.unisa.edu.au>
 812
 813         * i386-dis.c (dis386_intel): Remove macro chars, except for
 814         jEcxz.  Change cWtR and cRtd to cW and cR.
 815         (dis386_twobyte_intel): Remove macro chars here too.
 816         (putop): Handle R and W macros for intel mode.
 817
 818         * i386-dis.c (SIMD_Fixup): New function.
 819         (dis386_twobyte_att): Use it on movlps and movhps, and change
 820         Ev to EX on these insns.  Change movmskps Ev, XM to Gv, EX.
 821         (dis386_twobyte_intel): Same here.
 822
 823         * i386-dis.c (Av): Remove.
 824         (Ap): remove lptr.
 825         (lptr): Remove.
 826         (OPSIMD): Define.
 827         (OP_SIMD_Suffix): New function.
 828         (OP_DIR): Remove dead code.
 829         (eAX_reg..eDI_reg): Renumber.
 830         (onebyte_has_modrm): Table numbering comments.
 831         (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
 832         (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
 833         checks.  Print error on invalid dp->bytemode2.  Remove simd_cmp,
 834         and handle SIMD cmp insns in OP_SIMD_Suffix.
 835         (info->bytes_per_line): Bump from 5 to 6.
 836         (OP_None): Remove.
 837         (OP_E): Use INTERNAL_DISASSEMBLER_ERROR.  Handle sfence.
 838         (OP_3DNowSuffix): Ensure mnemonic index unsigned.
 839
 840         PIII SIMD support from Doug Ledford <dledford@redhat.com>
 841         * i386-dis.c (XM, EX, None): Define.
 842         (OP_XMM, OP_EX, OP_None): New functions.
 843         (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
 844         (GRP14): Rename to GRPAMD.
 845         (GRP*): Add USE_GROUPS flag.
 846         (PREGRP*): Define.
 847         (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
 848         (twobyte_has_modrm): Add SIMD entries.
 849         (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
 850         (grps): Add SIMD insns.
 851         (print_insn_x86): New vars uses_f3_prefix and simd_cmp.  Don't
 852         oappend repz if uses_f3_prefix.  Add code to handle new groups for
 853         SIMD insns.
 854
 855         From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
 856         * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
 857         operand from Av to Jv.
 858
 859 1999-05-07  Nick Clifton  <nickc@cygnus.com>
 860
 861         * mcore-dis.c (print_insn_mcore): Use .short to display
 862         unidentified instructions, not .word.
 863
 864 1999-04-26  Tom Tromey  <tromey@cygnus.com>
 865
 866         * aclocal.m4, configure: Updated for new version of libtool.
 867
 868 1999-04-14  Doug Evans  <devans@casey.cygnus.com>
 869
 870         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 871         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 872
 873 Mon Apr 12 23:46:17 1999  Jeffrey A Law  (law@cygnus.com)
 874
 875         * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
 876         instructions.
 877
 878 1999-04-10  Doug Evans  <devans@casey.cygnus.com>
 879
 880         * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
 881         * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
 882
 883 1999-04-06  Ian Lance Taylor  <ian@zembu.com>
 884
 885         * opintl.h (LC_MESSAGES): Never define.
 886
 887 1999-04-04  Ian Lance Taylor  <ian@zembu.com>
 888
 889         * i386-dis.c (intel_syntax, open_char, close_char): Make static.
 890         (separator_char, scale_char): Likewise.
 891         (print_insn_x86): Likewise.
 892         (print_insn_i386): Likewise.  Add declaration.
 893
 894 1999-03-26  Doug Evans  <devans@casey.cygnus.com>
 895
 896         * fr30-dis.c: Rebuild.
 897         * m32r-dis.c: Rebuild.
 898
 899 1999-03-23  Ian Lance Taylor  <ian@zembu.com>
 900
 901         * m68k-opc.c: Change compare instructions to use "@s" rather than
 902         ";s" when used with an immediate operand.
 903
 904 1999-03-22  Doug Evans  <devans@casey.cygnus.com>
 905
 906         * cgen-opc.c (cgen_set_cpu): Delete.
 907         (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
 908         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
 909         Rebuild.
 910         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
 911         Rebuild.
 912         * po/opcodes.pot: Rebuild.
 913
 914 1999-03-16  Martin Hunt  <hunt@cygnus.com>
 915
 916         * d30v-opc.c (mvtsys): Remove FLAG_LKR.
 917
 918 1999-03-11  Doug Evans  <devans@casey.cygnus.com>
 919
 920         * cgen-opc.c (cgen_set_cpu): New arg `isa'.  All callers updated.
 921         (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
 922         (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
 923         * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
 924         * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
 925         * m32r-opinst.c: Rebuild.
 926
 927 1999-02-25  Doug Evans  <devans@casey.cygnus.com>
 928
 929         * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
 930         (cgen_hw_lookup_by_num): Rewrite.
 931         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 932         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 933         * m32r-opinst.c: Rebuild.
 934
 935 Sat Feb 13 14:06:19 1999  Richard Henderson  <rth@cygnus.com>
 936
 937         * alpha-opc.c: Add sqrt+flags patterns.  Add EV6 PALcode insns.
 938         (insert_jhint): Fix insertion mask.
 939         * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
 940
 941 1999-02-10  Doug Evans  <devans@casey.cygnus.com>
 942
 943         * Makefile.in: Rebuild.
 944
 945 1999-02-09  Doug Evans  <devans@casey.cygnus.com>
 946
 947         * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
 948         * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
 949         * Makefile.am: Remove references to them.
 950         (HFILES): Add fr30-desc.h,m32r-desc.h.
 951         (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
 952         m32r-opinst.c.
 953         (ALL_MACHINES): Update.
 954         * configure.in: Redo handling of cgen_files.
 955         (bfd_i960_arch): Delete i960c-*.lo files.
 956         * configure: Regenerate.
 957         * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 958         (hash_insn_array): Rewrite.
 959         * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 960         (hash_insn_array): Rewrite.
 961         * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 962         (cgen_lookup_insn,cgen_get_insn_operands): Define here.
 963         (cgen_lookup_get_insn_operands): Ditto.
 964         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
 965         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 966         * po/POTFILES.in: Rebuild.
 967         * po/opcodes.pot: Rebuild.
 968
 969 Fri Feb  5 00:04:24 1999  Ian Lance Taylor  <ian@cygnus.com>
 970
 971         * Makefile.am: Rebuild dependencies.
 972         (HFILES): Add fr30-opc.h.
 973         (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
 974         * Makefile.in: Rebuild.
 975
 976         * configure.in: Change AC_PREREQ to 2.13.  Remove AM_CYGWIN32.
 977         Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
 978         AC_PROG_INSTALL.
 979         * acconfig.h: Remove.
 980         * configure: Rebuild with current autoconf/automake.
 981         * aclocal.m4: Likewise.
 982         * config.in: Likewise.
 983         * Makefile.in: Likewise.
 984
 985 Thu Feb  4 13:48:52 1999  Ian Lance Taylor  <ian@cygnus.com>
 986
 987         * m68k-opc.c: Correct move (not movew) to status word on 5200.
 988
 989 Mon Feb  1 20:54:36 1999  Catherine Moore  <clm@cygnus.com>
 990
 991         * disassemble.c (disassembler):  Handle bfd_mach_i386_i386_intel_syntax.
 992         * i386-dis.c (x_mode):  Define.
 993         (dis386):  Remove.
 994         (dis386_att):  New.
 995         (dis386_intel):  New.
 996         (dis386_twobyte):  Remove.
 997         (dis386_twobyte_att):  New.
 998         (dis386_twobyte_intel):  New.
 999         (print_insn_x86):  Use new arrays.
1000         (float_mem):  Remove.
1001         (float_mem_intel):  New.
1002         (float_mem_att):  New.
1003         (dofloat):  Use new float_mem arrays.
1004         (print_insn_i386_att):  New.
1005         (print_insn_i386_intel):  New.
1006         (print_insn_i386):  Handle bfd_mach_i386_i386_intel_syntax.
1007         (putop):  Handle intel syntax.
1008         (OP_indirE):  Handle intel syntax.
1009         (OP_E):  Handle intel syntax.
1010         (OP_I):  Handle intel syntax.
1011         (OP_sI):  Handle intel syntax.
1012         (OP_OFF):  Handle intel syntax.
1013
1014
1015
1016 1999-01-27  Doug Evans  <devans@casey.cygnus.com>
1017
1018         * fr30-opc.h,fr30-opc.c: Rebuild.
1019         * i960c-opc.h,i960c-opc.c: Rebuild.
1020         * m32r-opc.c: Rebuild.
1021
1022 Tue Jan 19 18:01:54 1999  David Taylor  <taylor@texas.cygnus.com>
1023
1024         * hppa-dis.c: revert HP merge changes until HP gives us
1025         an updated file.
1026
1027 1999-01-19  Nick Clifton  <nickc@cygnus.com>
1028
1029         * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
1030         offsets as well as symbloic address.
1031
1032 Tue Jan 19 10:51:01 1999  David Taylor  <taylor@texas.cygnus.com>
1033
1034         * hppa-dis.c: fix comments and some indentation.
1035
1036 1999-01-12  Doug Evans  <devans@casey.cygnus.com>
1037
1038         * fr30-opc.c,i960c-opc.c: Regenerate.
1039
1040 1999-01-11  Doug Evans  <devans@casey.cygnus.com>
1041
1042         * fr30-opc.c: Regenerate.
1043
1044 1999-01-06  Doug Evans  <devans@casey.cygnus.com>
1045
1046         * m32r-dis.c: Regenerate.
1047
1048 1999-01-05  Doug Evans  <devans@casey.cygnus.com>
1049
1050         * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
1051         * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
1052         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1053
1054 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1055
1056         * configure.in: Require autoconf 2.12.1 or higher.
1057
1058 1998-12-30  Gavin Romig-Koch  <gavin@cygnus.com>
1059
1060         * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
1061
1062 Wed Dec 16 16:17:49 1998  Dave Brolley  <brolley@cygnus.com>
1063
1064         * fr30-opc.c: Regenerated.
1065
1066 1998-12-16  Gavin Romig-Koch  <gavin@cygnus.com>
1067
1068         * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
1069
1070 1998-12-15  Dave Brolley  <brolley@cygnus.com>
1071
1072         * fr30-opc.c,fr30-opc.h: Regenerated.
1073
1074 1998-12-14  Dave Brolley  <brolley@cygnus.com>
1075
1076         * fr30-opc.c,fr30-opc.h: Regenerated.
1077
1078 Thu Dec 10 18:39:46 1998  Dave Brolley  <brolley@cygnus.com>
1079
1080         * fr30-opc.c,fr30-opc.h: Regenerated.
1081
1082 Thu Dec 10 12:49:24 1998  Doug Evans  <devans@canuck.cygnus.com>
1083
1084         * m32r-opc.c: Regenerate.
1085
1086 Tue Dec  8 13:56:18 1998  David Taylor  <taylor@texas.cygnus.com>
1087
1088         * dis-buf.c (generic_strcat_address): reformat to GNU coding
1089         conventions.  change sprintf call to an sprintf_vma call.
1090
1091 Tue Dec  8 13:12:44 1998  Dave Brolley  <brolley@cygnus.com>
1092
1093         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1094
1095 Tue Dec  8 10:50:46 1998  David Taylor  <taylor@texas.cygnus.com>
1096
1097         The following changes were made by
1098         Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
1099         David Taylor <taylor@texas.cygnus.com>, and
1100         Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
1101         merge in changes by HP; HP did not create ChangeLog entries.
1102
1103         * dis-buf.c (generic_strcat_address): new function.
1104
1105         * hppa-dis.c: Changes to improve hppa disassembly.
1106           Changed formatting in : reg_names, fp_reg_names,control_reg,
1107           New variables : sign_extension_names, deposit_names, conversion_names
1108             float_test_names, compare_cond_names_double, add_cond_names_double,
1109             logical_cond_names_double, unit_cond_names_double,
1110             branch_push_pop_names, saturation_names, shift_names, mix_names,
1111           New Macros :   GET_COMPL_O, GET_PUSH_POP,MERGED_REG
1112           Move some definitions to libhppa.h: GET_FIELD, GET_BIT
1113           (fput_const): renamed as fput_hex_const
1114           (print_insn_hppa):
1115            - use the macros fputs_filtered and
1116              fput_decimal_const whenever possible; calls to sign_extend require
1117              2 params -- add a missing second param of 0.
1118            - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
1119              architecture version number of current machine. HP folks are
1120              trying to handle situation where the target program was compiled
1121              for PA 1.x (32-bit), but is running on a PA 2.0 machine and
1122              visa versa.
1123            - added new cases : 'g', 'B', 'm'
1124            - added cases specifically for PA 2.0
1125            - changed the following cases : '"', 'n', 'N', 'p', 'Z',
1126            - calls to fput_const become calls to fput_hex_const
1127
1128 1998-12-07  James E Wilson  <wilson@wilson-pc.cygnus.com>
1129
1130         * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
1131         (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
1132         (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
1133         * Makefile.in: Rebuilt.
1134         * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
1135         i960-dis.c to ta.
1136         * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
1137         * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
1138
1139 Mon Dec  7 14:33:44 1998  Dave Brolley  <brolley@cygnus.com>
1140
1141         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1142
1143 Sun Dec  6 14:06:48 1998  Ian Lance Taylor  <ian@cygnus.com>
1144
1145         * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
1146
1147         * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
1148         From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
1149
1150 Fri Dec  4 17:45:51 1998  Doug Evans  <devans@canuck.cygnus.com>
1151
1152         * fr30-opc.c: Regenerate.
1153
1154 Fri Dec  4 17:08:08 1998  Dave Brolley  <brolley@cygnus.com>
1155
1156         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1157
1158 Thu Dec  3 14:26:20 1998  Dave Brolley  <brolley@cygnus.com>
1159
1160         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1161
1162 Thu Dec  3 00:09:17 1998  Doug Evans  <devans@canuck.cygnus.com>
1163
1164         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1165
1166 1998-11-30  Doug Evans  <devans@casey.cygnus.com>
1167
1168         * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
1169         CGEN_INSN_BASE_VALUE.
1170         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1171         * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
1172
1173 Thu Nov 26 11:26:32 1998  Dave Brolley  <brolley@cygnus.com>
1174
1175         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
1176
1177 Tue Nov 24 11:20:54 1998  Dave Brolley  <brolley@cygnus.com>
1178
1179         * fr30-asm.c,fr30-dis.c: Regenerated.
1180
1181 Mon Nov 23 18:28:48 1998  Dave Brolley  <brolley@cygnus.com>
1182
1183         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1184
1185 1998-11-20  Doug Evans  <devans@tobor.to.cygnus.com>
1186
1187         * fr30-opc.c: Regenerated.
1188
1189 Thu Nov 19 16:02:46 1998  Dave Brolley  <brolley@cygnus.com>
1190
1191         * fr30-opc.c: Regenerated.
1192         * fr30-opc.h: Regenerated.
1193         * fr30-dis.c: Regenerated.
1194         * fr30-asm.c: Regenerated.
1195
1196 Thu Nov 19 07:54:15 1998  Doug Evans  <devans@charmed.cygnus.com>
1197
1198         * mips-opc.c (sync.p,sync.l): Swap insn values.
1199
1200 1998-11-19  Doug Evans  <devans@tobor.to.cygnus.com>
1201
1202         * fr30-opc.c: Regenerate.
1203
1204 Wed Nov 18 21:36:37 1998  Dave Brolley  <brolley@cygnus.com>
1205
1206         * fr30-opc.c: Regenerated.
1207         * fr30-opc.h: Regenerated.
1208
1209 1998-11-18  Doug Evans  <devans@casey.cygnus.com>
1210
1211         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
1212         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
1213
1214 Wed Nov 18 11:30:04 1998  Dave Brolley  <brolley@cygnus.com>
1215
1216         * fr30-opc.c: Regenerated.
1217
1218 Mon Nov 16 19:21:48 1998  Dave Brolley  <brolley@cygnus.com>
1219
1220         * fr30-opc.c: Regenerated.
1221         * fr30-opc.h: Regenerated.
1222         * fr30-dis.c: Regenerated.
1223         * fr30-asm.c: Regenerated.
1224
1225 Thu Nov 12 19:24:18 1998  Dave Brolley  <brolley@cygnus.com>
1226
1227         * po/opcodes.pot: Regenerated.
1228         * fr30-opc.c: Regenerated.
1229         * fr30-opc.h: Regenerated.
1230         * fr30-dis.c: Regenerated.
1231         * fr30-asm.c: Regenerated.
1232
1233 Tue Nov 10 15:26:27 1998  Nick Clifton  <nickc@cygnus.com>
1234
1235         * disassemble.c (disassembler): Add support for FR30 target.
1236
1237 Tue Nov 10 11:00:04 1998  Doug Evans  <devans@canuck.cygnus.com>
1238
1239         * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
1240         * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
1241
1242 Mon Nov  9 18:22:55 1998  Dave Brolley  <brolley@cygnus.com>
1243
1244         * po/opcodes.pot: Regenerate.
1245         * po/POTFILES.in: Regenerate.
1246         * fr30-opc.c: Regenerate.
1247         * fr30-opc.h: Regenerate.
1248
1249 Fri Nov  6 17:21:38 1998  Doug Evans  <devans@canuck.cygnus.com>
1250
1251         * m32r-asm.c: Regenerate.
1252
1253 Wed Nov  4 18:46:47 1998  Dave Brolley  <brolley@cygnus.com>
1254
1255         * configure.in: Added case for bfd_fr30_arch.
1256         * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
1257         (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
1258         (CLEANFILES): Added stamp-fr30.
1259         (FR30_DEPS): Added.
1260         * fr30-asm.c: New file.
1261         * fr30-dis.c: New file.
1262         * fr30-opc.c: New file.
1263         * fr30-opc.h: New file.
1264         * po/POTFILES.in: Regenerated
1265         * po/opcodes.pot: Regenerated
1266
1267 Mon Nov  2 15:05:33 1998  Geoffrey Noer  <noer@cygnus.com>
1268
1269         * configure.in: detect cygwin* instead of cygwin32*
1270         * configure: regenerate
1271
1272 Tue Oct 27 08:58:37 1998  Gavin Romig-Koch  <gavin@cygnus.com>
1273
1274         * mips-opc.c (IS_M): Added.
1275
1276 Mon Oct 19 13:03:19 1998  Doug Evans  <devans@seba.cygnus.com>
1277
1278         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1279
1280 Fri Oct  9 14:01:56 1998  Doug Evans  <devans@seba.cygnus.com>
1281
1282         * m32r-opc.h,m32r-opc.c: Regenerate.
1283
1284 Sun Oct  4 21:01:44 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1285
1286         * i386-dis.c (OP_3DNowSuffix): New static function.
1287         (OPSUF): Define.
1288         (GRP14): Define.
1289         (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1290         (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1291         (insn_codep): New static variable.
1292         (print_insn_x86): Init insn_codep after prefixes.
1293         (grps): Add GRP14 entries for prefetch, prefetchw.
1294         (OP_REG): Reformat.
1295
1296         From Jeff B Epler <jepler@usgs.gov>
1297         * i386-dis.c (Suffix3DNow): New table.
1298
1299 Wed Sep 30 10:17:50 1998  Nick Clifton  <nickc@cygnus.com>
1300
1301         * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1302
1303 Mon Sep 28 14:35:43 1998  Martin M. Hunt  <hunt@cygnus.com>
1304
1305         * d10v-dis.c (print_operand): If num is nonzero, then
1306         add OPERAND_ACC1, not OPERAND_ACC0.
1307
1308 Thu Sep 24 09:20:03 1998  Nick Clifton  <nickc@cygnus.com>
1309
1310         * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1311         insns.
1312
1313 Tue Sep 22 17:55:14 1998  Nick Clifton  <nickc@cygnus.com>
1314
1315         * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1316         class.
1317
1318 Tue Sep 15 15:14:45 1998  Doug Evans  <devans@canuck.cygnus.com>
1319
1320         * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1321
1322 1998-09-09  Michael Meissner  <meissner@cygnus.com>
1323
1324         * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1325         to/from SPRs.
1326
1327 Fri Sep  4 19:42:59 1998  Nick Clifton  <nickc@cygnus.com>
1328
1329         * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1330         object files.
1331         (print_insn_little_arm): Detect Thumb symbols in elf object
1332         files.
1333
1334 Sat Aug 29 22:24:09 1998  Richard Henderson  <rth@cygnus.com>
1335
1336         * alpha-dis.c (print_insn_alpha): Use the machine type to
1337         decide which PALcode set to include.
1338
1339 Sun Aug 23 02:16:18 1998  Richard Henderson  <rth@cygnus.com>
1340
1341         * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1342
1343 Fri Aug 21 16:07:52 1998  Nick Clifton  <nickc@cygnus.com>
1344
1345         * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1346         MSUB and MSUBS instructions.
1347
1348 Thu Aug 13 16:23:04 1998  Ian Lance Taylor  <ian@cygnus.com>
1349
1350         * ppc-opc.c (powerpc_operands): Omit parens around additions in
1351         operand name macros.
1352
1353 Wed Aug 12 14:00:38 1998  Ian Lance Taylor  <ian@cygnus.com>
1354
1355         From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1356         * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1357         +, -, and d for ColdFire.
1358
1359         From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1360         * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1361         (extract_mbe): Likewise.
1362
1363 Wed Aug 12 11:11:34 1998  Jeffrey A Law  (law@cygnus.com)
1364
1365         * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1366
1367         * m10300-opc.c: First cut at UDF instructions.
1368
1369 Mon Aug 10 14:08:22 1998  Doug Evans  <devans@canuck.cygnus.com>
1370
1371         * m32r-opc.c: Regenerate (remove semantic descriptions).
1372
1373 Mon Aug 10 12:51:12 1998  Catherine Moore  <clm@cygnus.com>
1374
1375         * arm-dis.c (print_insn_big_arm):  Fix indentation.
1376         (print_insn_little_arm): Likewise.
1377
1378 Sun Aug  9 20:17:28 1998  Catherine Moore  <clm@cygnus.com>
1379
1380         * arm-dis.c (print_insn_big_arm):  Check for thumb symbol
1381         attributes.
1382         (print_insn_little_arm): Likewise.
1383
1384 Mon Aug  3 12:43:16 1998  Doug Evans  <devans@seba.cygnus.com>
1385
1386         Move all global state data into opcode table struct, and treat
1387         opcode table as something that is "opened/closed".
1388         * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1389         (cgen_asm_init): Delete.
1390         (cgen_set_parse_operand_fn): New function.
1391         * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1392         (cgen_dis_init): Delete.
1393         * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1394         (cgen_current_{opcode_table_mach,endian}): Delete.
1395         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1396
1397 Thu Jul 30 21:41:10 1998  Frank Ch. Eigler  <fche@cygnus.com>
1398
1399         * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1400         instructions.
1401
1402 Tue Jul 28 11:00:09 1998  Jeffrey A Law  (law@cygnus.com)
1403
1404         * m10300-opc.c: Add entries for "no_match_operands" field in
1405         the opcode table.
1406
1407 Fri Jul 24 11:41:37 1998  Doug Evans  <devans@canuck.cygnus.com>
1408
1409         * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1410
1411 Tue Jul 21 13:41:07 1998  Doug Evans  <devans@seba.cygnus.com>
1412
1413         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1414
1415 Mon Jul 13 14:53:59 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1416
1417         * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1418         the first prefix.
1419         (dofloat): Correct test for fnstsw.  Print `fnstsw %ax' rather
1420         than `fnstsw %eax'.
1421         (OP_J): Remove unnecessary subtraction when 16-bit displacement
1422         will be masked later.
1423
1424 Thu Jul  2 17:11:27 1998  Doug Evans  <devans@seba.cygnus.com>
1425
1426         * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1427
1428 Wed Jul  1 16:11:16 1998  Doug Evans  <devans@seba.cygnus.com>
1429
1430         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1431
1432 Fri Jun 26 11:08:55 1998  Jeffrey A Law  (law@cygnus.com)
1433
1434         * m10300-dis.c: Only recognize instructions from the currently
1435         selected machine.
1436         * m10300-opc.c: Add field indicating the particular variant of
1437         the mn10300 each instruction is available on.
1438
1439 Fri Jun 26 12:04:21 1998  Ian Lance Taylor  <ian@cygnus.com>
1440
1441         * configure.in: For bfd_vax_arch, build vax-dis.lo.
1442         * Makefile.am: Rebuild dependencies.
1443         (CFILES): Add vax-dis.c.
1444         (ALL_MACHINES): Add vax-dis.lo.
1445         * aclocal.m4: Rebuild with current libtool.
1446         * configure, Makefile.in: Rebuild.
1447
1448 Fri Jun 26 12:03:20 1998  Klaus Kaempf  <kkaempf@progis.de>
1449
1450         * vax-dis.c: New file, from work by Pauline Middelink
1451         <middelin@polyware.iaf.nl>.
1452         * disassemble.c (ARCH_vax): Define if ARCH_all.
1453         (disassembler): Add case for ARCH_vax.
1454         * makefile.vms: Support compilation on vms/vax.
1455
1456 Tue Jun 23 19:42:18 1998  Mark Alexander  <marka@cygnus.com>
1457
1458         * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1459         related to sign extension and the size of ints.
1460
1461 Tue Jun 23 10:59:26 1998  Jeffrey A Law  (law@cygnus.com)
1462
1463         * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1464         instructions.  Support (sp) addressing mode by expanding it into
1465         (0,sp).
1466
1467 Sat Jun 20 14:46:20 1998  Frank Ch. Eigler  <fche@cygnus.com>
1468
1469         * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1470
1471 Fri Jun 19 09:16:42 1998  Mark Alexander  <marka@cygnus.com>
1472
1473         * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1474
1475 1998-06-18  Ulrich Drepper  <drepper@cygnus.com>
1476
1477         * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1478         sysexit.
1479
1480 Thu Jun 18 10:22:24 1998  John Metzler  <jmetzler@cygnus.com>
1481
1482         * mips-dis.c (print_insn_little_mips): Previously, instruction
1483         printing references the symbol table to determine whether the
1484         instruction resides in a block regular instructions or mips16
1485         instructions. However, when the disassembler gets used in other
1486         environments where the symbol table is not present, we no longer
1487         rely in the symbol table, rather, use the low bit of the
1488         instructions address to guess. There should be no change for usage
1489         of the disassembler in host based programs, gdb, objdump.
1490         (print_insn_big_mips): ditto.
1491         (print_insn_mips): ditto
1492
1493 Wed Jun 17 21:19:01 1998  Mark Alexander  <marka@cygnus.com>
1494
1495         * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1496
1497 Wed Jun 17 17:49:23 1998  Jeffrey A Law  (law@cygnus.com)
1498
1499         * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1500
1501 Tue Jun 16 13:10:51 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1502
1503         * i386-dis.c (index16): Add '%' to register names.  Use ','
1504         instead of '+'.
1505
1506 Sat Jun 13 11:33:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1507
1508         * i386-dis.c: Don't print opcode suffix when we can figure out the
1509         size (and gas can!) by register operands, or from the default
1510         size.
1511         (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros.  Rename 'C'
1512         macro to 'E'.
1513         (dis386, dis386_twobyte, grps): Use new suffix macros.
1514         (dis386): Correct imul Ib to imul sIb.  Change jnl to jge to be
1515         consistent.  Add suffix for call, jmp, lcall, ljmp, iret.  Reverse
1516         order of cmps operands to agree with Intel docs.  Correct operand
1517         of aad and aam (Ib -> sIb).  Change ud2b from 0fb8 to 0fb9 to
1518         agree with Intel docs.
1519         (print_insn_x86): Print orphan fwait before other prefixes.
1520         Return correct byte count for orphan fwait with prefixes.  Don't
1521         print `bound' operands in reverse order.
1522         (ckprefix): Stop accumulating prefixes if we get fwait.
1523         (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1524
1525 Fri Jun 12 13:40:38 1998  Tom Tromey  <tromey@cygnus.com>
1526
1527         * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1528         ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1529
1530 Fri Jun 12 11:04:06 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1531
1532         Fix problems when bfd_vma is wider than long.
1533         * i386-dis.c: Make op_address and start_pc unsigned.
1534         (set_op): Make parameter unsigned.
1535         (print_insn_x86): Cast to bfd_vma when passing a value to
1536         print_address_func.
1537         * ns32k-dis.c (CORE_ADDR): Don't define.
1538         (print_insn_ns32k): Change type of addr to bfd_vma.  Use
1539         bfd_scan_vma to read back address.
1540         (print_insn_arg): Change type of addr to bfd_vma.  Use sprintf_vma
1541         to format it.
1542         * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1543         (NEXTULONG): New definition.
1544         (print_insn_m68k): Avoid overflow when computing third argument of
1545         print_insn_arg.
1546         (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1547         Use disp instead of val to store offset values.
1548         (print_indexed): Use base_disp instead of word to store base
1549         displacement, to avoid overflow.
1550         * m10300-dis.c (disassemble): Cast value to long when computing
1551         pc-relative address, to get correct sign extension.
1552
1553 Wed Jun 10 15:58:37 1998  Doug Evans  <devans@canuck.cygnus.com>
1554
1555         * m32r-opc.c: Regenerate.
1556
1557 Tue Jun  9 14:27:57 1998  Nick Clifton  <nickc@cygnus.com>
1558
1559         * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1560         'mov rX, rY'.  Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1561
1562 Mon Jun  8 18:17:21 1998  Nick Clifton  <nickc@cygnus.com>
1563
1564         * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1565
1566 Fri Jun  5 23:47:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1567
1568         * i386-dis.c:  Combine aflag and dflag into sizeflag.  Change OP_*
1569         functions to void.
1570         (OP_DSreg): Rename from OP_DSSI.
1571         (OP_ESreg): Rename from OP_ESDI.
1572         (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1573         (DSBX): Define.
1574         (append_seg): Rename from append_prefix.
1575         (ptr_reg): New function.
1576         (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1577         Add DSBX for xlat.
1578         (PREFIX_ADDR): Rename from PREFIX_ADR.
1579         (float_reg): Add non-broken opcodes for people who don't want
1580         UNIXWARE_COMPAT.
1581
1582 Fri Jun  5 19:15:04 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1583
1584         * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1585         68000/68008/68010.
1586
1587 Wed Jun  3 18:56:22 1998  H.J. Lu  <hjl@gnu.org>
1588
1589         * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1590
1591 Tue Jun  2 15:06:46 1998  Geoff Keating  <geoffk@ozemail.com.au>
1592
1593         * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1594         0; produce error message for shifts of size 32 (or 64 for 64-bit
1595         shifts), because the hardware doesn't support them.
1596
1597 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
1598
1599         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
1600         LONG_2, LONG_2b formats to use this new operand.
1601
1602 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
1603
1604         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1605
1606 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
1607
1608         * sparc-dis.c (print_insn_sparc): big endian instruction / little
1609         endian data support.
1610
1611 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
1612
1613         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1614         and SHORT_B3b formats to use Rb instead of Ra.
1615
1616         Add FLAG_MUL16 to MUL2XH opcode.
1617
1618         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1619         to existing 1.1.1 parallelisation prohibition procedure.
1620
1621 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
1622
1623         * m32r-asm.c,m32r-dis.c: Regenerate.
1624
1625 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1626
1627         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1628         with a shift count of 0.
1629
1630 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
1631
1632         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1633         (cgen_hw_lookup_by_num): New function.
1634
1635 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
1636
1637         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1638
1639 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
1640
1641         * sparc-dis.c (print_insn_sparc): Always fetch instructions
1642         as big-endian on SPARClite.
1643
1644 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
1645
1646         * d30v-opc.c (pre_defined_register): Remove alias for r0.
1647
1648 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
1649
1650         * po/Make-in (install-info): New target.
1651
1652 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
1653
1654         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1655         * configure: Rebuild.
1656
1657 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
1658
1659         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1660         variety of ISA2 instructions to set bottom ten bits of trap code.
1661
1662 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
1663
1664         * Makefile.am (config.status): Add explicit target so that
1665         config.status depends upon bfd/configure.in.
1666         * Makefile.in: Rebuild.
1667
1668 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
1669
1670         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1671         instructions to set bottom ten bits of break code.
1672         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1673         for above optional argument.
1674
1675 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
1676
1677         * makefile.vms: Run dec c with /nodebug.
1678
1679 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
1680
1681         * Makefile.in: Rebuilt.
1682         * Makefile.am: Regenerated dependencies with mkdep.
1683
1684         * opintl.h (_): Define as dgettext.
1685
1686 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
1687
1688         * cgen-asm.c: Internationalised.
1689         * m32r-asm.c: Internationalised.
1690         * m32r-dis.c: Internationalised.
1691         * m32r-opc.c: Internationalised.
1692
1693         * aclocal.m4: Regenerated.
1694         * configure: Regenerated.
1695         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1696         * Makefile.in: Rebuild.
1697         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1698         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1699
1700 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1701
1702         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
1703         after AC_PROG_CC.
1704         * aclocal.m4, configure: Rebuild with current tools.
1705
1706 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
1707
1708         * opintl.h: New file - contains internationalisation macros used
1709         by source files in this directory.
1710         * po/: New subdirectory - contains internationalisation files.
1711         * po/Make-in: New file - Makefile constructor.
1712         * po/POTFILES.in: New file - list of files in opcodes directory
1713         that should be scan for internationalisation macros.
1714         * po/opcodes.pot: New file - list of internationisation strings
1715         found in files mentioned in po/POTFILES.in.
1716         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
1717         entry.  Add intl directory to include paths.
1718         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1719         HAVE_STRCPY, HAVE_LC_MESSAGES
1720         * configure.in: Add rule to build Makefile in po subdirectory.
1721         * Makefile.in: Rebuilt.
1722         * aclocal.m4: Rebuilt.
1723         * config.in: Rebuilt.
1724         * configure: Rebuilt.
1725         * alpha-opc.c: Internationalised.
1726         * arc-dis.c: Internationalised.
1727         * arc-opc.c: Internationalised.
1728         * arm-dis.c: Internationalised.
1729         * cgen-asm.c: Internationalised.
1730         * d30v-dis.c: Internationalised.
1731         * dis-buf.c: Internationalised.
1732         * h8300-dis.c: Internationalised.
1733         * h8500-dis.c: Internationalised.
1734         * i386-dis.c: Internationalised.
1735         * m10200-dis.c: Internationalised.
1736         * m10300-dis.c: Internationalised.
1737         * m68k-dis.c: Internationalised.
1738         * m88k-dis.c: Internationalised.
1739         * mips-dis.c: Internationalised.
1740         * ns32k-dis.c: Internationalised.
1741         * opintl.h: Internationalised.
1742         * ppc-opc.c: Internationalised.
1743         * sparc-dis.c: Internationalised.
1744         * v850-dis.c: Internationalised.
1745         * v850-opc.c: Internationalised.
1746
1747 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
1748
1749         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1750         (asm_hash_table_entries): New variable.
1751         (cgen_asm_init): Free asm_hash_table_entries.
1752         (hash_insn_array,hash_insn_list): New functions.
1753         (build_asm_hash_table): Use them.  Hash macro insns as well.
1754         (cgen_asm_lookup_insn): Update.
1755         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1756         (dis_hash_table_entries): New variable.
1757         (cgen_dis_init): Free dis_hash_table_entries.
1758         (hash_insn_array,hash_insn_list): New functions.
1759         (build_dis_hash_table): Use them.  Hash macro insns as well.
1760         (cgen_dis_lookup_insn): Update.
1761         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1762         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1763         (cgen_macro_insn_count): New function.
1764         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1765
1766 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1767
1768         * i386-dis.c (OP_DSSI): Print segment override.
1769
1770 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
1771
1772         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1773         operator.
1774
1775 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1776
1777         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1778         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1779         * configure.in: Define and substitute WIN32LDFLAGS and
1780         WIN32LIBADD.
1781         * aclocal.m4: Rebuild with new libtool.
1782         * configure, Makefile.in: Rebuild.
1783
1784 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
1785
1786         * m32r-opc.c: Regenerate.
1787
1788 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
1789
1790         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1791         before trying to copy it.
1792         * Makefile.in: Rebuild.
1793
1794 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
1795
1796         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1797
1798 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
1799
1800         * ns32k-dis.c (bit_extract_simple): New function to extract bits
1801         from an arbitrary valid buffer instead of fetching them on demand
1802         using fetch_data().
1803         (invalid_float): use bit_extract_simple() instead of bit_extract().
1804
1805 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1806
1807         From H.J. Lu <hjl@gnu.org>:
1808         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1809         to Ev for both.
1810
1811 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
1812
1813         * Branched binutils 2.9.
1814
1815 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
1816
1817         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1818         disassembling last 4 bytes of a section.
1819
1820 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1821
1822         Fix some gcc -Wall warnings:
1823         * arc-dis.c (print_insn): Add casts to avoid warnings.
1824         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1825         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1826         * m10200-dis.c (disassemble): Likewise.
1827         * m10300-dis.c (disassemble): Likewise.
1828         * ns32k-dis.c (print_insn_ns32k): Likewise.
1829         * ppc-opc.c (insert_ral, insert_ram): Likewise.
1830         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1831         * cgen-opc.c (cgen_keyword_search_next): Likewise.
1832         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1833         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1834         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1835         * tic80-dis.c (print_one_instruction): Likewise.
1836         * w65-dis.c (print_operand): Likewise.
1837         * z8k-dis.c (fetch_data): Likewise.
1838         * a29k-dis.c: Add return type for find_byte_func_type.
1839         * arc-opc.c: Include <stdio.h>.  Remove declarations of
1840         insert_multshift and extract_multshift.
1841         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1842         conditionals.
1843         (extract_value): Fully parenthesize expression.
1844         * h8500-dis.c (print_insn_h8500): Initialize local variables.
1845         * h8500-opc.h (h8500_table): Fully bracket initializer.
1846         * w65-opc.h (optable): Likewise.
1847         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1848         * i386-dis.c (OP_E): Initialize local variables.
1849         * m10200-dis.c (print_insn_mn10200): Likewise.
1850         * mips-dis.c (print_insn_mips16): Likewise.
1851         * sh-dis.c (print_insn_shx): Likewise.
1852         * v850-dis.c (print_insn_v850): Likewise.
1853         * ns32k-dis.c (print_insn_arg): Declare.
1854         (get_displacement, invalid_float): Declare.
1855         (list_search, sign_extend, flip_bytes): Declare return type.
1856         (get_displacement): Likewise.
1857         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
1858         string.
1859         (print_insn_ns32k): Make i unsigned.
1860         (invalid_float): Make static.  Declare type of val.
1861         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
1862         on each for iteration.
1863         * tic30-dis.c (get_indirect_operand): Likewise.
1864         * z8k-dis.c (print_insn_z8001): Declare return type.
1865         (print_insn_z8002): Likewise.
1866         (unparse_instr): Fix sprintf format strings.
1867
1868 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
1869
1870         * mips-opc.c: Add "sync.l" and "sync.p".
1871
1872 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1873
1874         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1875         default m68k variant to recognize.
1876
1877         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1878         (ctrl, cobr, mem, ea): Likewise.
1879         (print_addr): Likewise.  Remove cast.
1880         (ea): Cast argument of print_addr to bfd_vma.
1881
1882         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1883         variable value.
1884         (cgen_parse_unsigned_integer): Likewise.
1885         (cgen_parse_address): Likewise.
1886
1887 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
1888
1889         * i960-dis.c (ctrl): Add full braces to structure initialization.
1890         (cobr, mem, reg): Likewise.
1891         (ea): Correct parenthesization in expression.
1892
1893         * cgen-asm.c: Include <ctype.h>.
1894         (build_asm_hash_table): Remove unused local variable i.
1895         (cgen_parse_keyword): Add casts to avoid warnings.
1896
1897         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1898         symbol.  Fix indentation.
1899         (print_insn_little_arm): Likewise.
1900
1901 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
1902
1903         * configure.in: Use AM_DISABLE_SHARED.
1904         * aclocal.m4, configure: Rebuild with libtool 1.2.
1905
1906 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
1907
1908         These patches are courtesy of Jonathan Walton and Tony Thompson
1909         (athompso@cambridge.arm.com).
1910
1911         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1912         relative addresses.
1913
1914         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1915         both the offset and the label closest to the destination.
1916
1917 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
1918
1919         * m32r-opc.h: Regenerate.
1920
1921 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
1922
1923         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1924
1925 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
1926
1927         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1928         assume that info->symbols is non-empty.
1929
1930 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
1931
1932         * alpha-opc.c (cvtqs) There is no such thing.
1933         (cvttq): Missing most of the /*d variants.
1934
1935 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
1936
1937         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1938         delayed branches or jumps.
1939
1940 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1941
1942         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1943         to *info->symbols.
1944         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1945         * tic30-dis.c (print_branch): Likewise.
1946
1947 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
1948
1949         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1950         saved_symbol code as it is no longer needed.
1951
1952 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
1953
1954         * cgen-asm.c: Include symcat.h.
1955         * cgen-dis.c,cgen-opc.c: Ditto.
1956         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1957
1958 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
1959
1960         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1961
1962 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
1963
1964         * m32r-opc.[ch]: Regenerate.
1965
1966 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
1967
1968         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1969         arguments.  Don't perform validation here.
1970         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1971
1972 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
1973
1974         * m32r-opc.c: Regenerate.
1975
1976 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
1977
1978         * Makefile.am (AUTOMAKE_OPTIONS): Define.
1979         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1980
1981 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
1982
1983         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1984
1985 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
1986
1987         * configure.in: Get the version number from BFD.
1988         * configure: Rebuild.
1989
1990         From H.J. Lu <hjl@gnu.org>:
1991         * Makefile.am (libopcodes_la_LDFLAGS): Define.
1992         * Makefile.in: Rebuild.
1993
1994 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
1995
1996         * m32r-opc.c: Regenerate.
1997         * m32r-opc.h: Regenerate.
1998
1999 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
2000
2001         * m32r-opc.c: Regenerate.
2002
2003 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
2004
2005         Fix rac to accept only a0:
2006         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
2007         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
2008         Introduce OPERAND_GPR.
2009         * d10v-dis.c (print_operand): Likewise.
2010
2011 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
2012
2013         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
2014         (cgen_hw_lookup): Make result const.
2015         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2016
2017 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
2018
2019         * configure, aclocal.m4: Rebuild with new libtool.
2020
2021 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
2022
2023         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
2024         instructions use a PC relative branch, not absolute.
2025
2026 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
2027
2028         * configure.in: Set libtool_enable_shared rather than
2029         libtool_shared.  Remove diversion hack.
2030         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
2031
2032 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
2033
2034         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
2035         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2036
2037 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
2038
2039         * tic30-dis.c: New file.
2040         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
2041         * configure.in: Handle bfd_tic30_arch.
2042         * Makefile.am: Rebuild dependencies.
2043         (CFILES): Add tic30-dis.c
2044         (ALL_MACHINES): Add tic30-dis.lo.
2045         * configure, Makefile.in: Rebuild.
2046
2047 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
2048
2049         * m32r-opc.h (HAVE_CPU_M32R): Define.
2050
2051 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
2052
2053         * v850-opc.c (insertion routines): If both alignment and size is
2054         wrong then report this.
2055
2056 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
2057
2058         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
2059         Only recognize instructions for the current target_processor.
2060
2061 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
2062
2063         * d10v-dis.c (PC_MASK): Correct value.
2064         (print_operand): If there's a reloc, don't calculate the
2065         address because they could be in different sections.
2066
2067 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
2068
2069         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
2070         instruction after the 4650's "mul" instruction; nobody's using the
2071         4010 these days.  If object files someday indicate which processor
2072         variant they're intended for, we can do a better job at this.
2073
2074 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
2075
2076         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
2077         table provided entry size.  Use CGEN_INSN_MNEMONIC.
2078         (cgen_parse_keyword): Rewrite.
2079         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
2080         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
2081         * cgen-opc.c: Clean up pass over `struct foo' usage.
2082         (cgen_keyword_lookup_value): Handle "" entry.
2083         (cgen_keyword_add): Likewise.
2084
2085 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
2086
2087         * mips-opc.c: Add FP_D to s.d instruction flags.
2088
2089 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2090
2091         * m68k-opc.c (halt, pulse): Enable them on the 68060.
2092
2093 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
2094
2095         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
2096         PC relative offset forms before the 15 bit forms.  An assembler command
2097         line option now chooses the default.
2098
2099 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
2100
2101         * d30v-opc.c (d30v_opcode_table): Set new flags bits
2102         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
2103
2104 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
2105
2106         * configure: Only build libopcodes shared if --enable-shared's value
2107         was `yes', or was set to `*opcodes*'.
2108         * aclocal.m4: Likewise.
2109         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
2110         original source of this bit of code.  It's not clear what the best fix
2111         would be, though.
2112
2113 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
2114
2115         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
2116         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
2117         offset forms before the 15 bit forms, to default to the long forms.
2118
2119 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
2120
2121         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
2122
2123 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
2124
2125         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
2126         symbol if none is present.
2127         (print_insn_big_arm):  Prevent examination of stored symbol if
2128         none is present.
2129
2130 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
2131
2132         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
2133
2134 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
2135
2136         * disassemble.c: Remove disasm_symaddr() function.
2137
2138         * arm-dis.c: Use info->symbol instead of info->flags to determine
2139         if disassmbly should be in Thumb or Arm mode.
2140
2141 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
2142
2143         * arm-dis.c: Add support for disassembling Thumb opcodes.
2144         (print_insn_thumb): New function.
2145
2146         * disassemble.c (disasm_symaddr): New function.
2147
2148         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
2149         (thumb_opcodes): Table of Thumb opcodes.
2150
2151 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2152
2153         * m68k-opc.c (btst): Change Dd@s to Dd;b.
2154
2155         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
2156         and 'v' as operand types.
2157
2158 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
2159
2160         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
2161         <olivier.carmona@di.epfl.ch>.
2162         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
2163         which has a two word opcode with a one word argument.
2164
2165 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
2166
2167         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
2168         unsigned, not signed.
2169         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
2170
2171 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
2172
2173         * d10v-dis.c (print_operand):
2174         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
2175
2176 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
2177
2178         * d10v-opc.c (OPERAND_FLAG): Split into:
2179         (OPERAND_FFLAG, OPERAND_CFLAG) .
2180         (FSRC): Split into:
2181         (FFSRC, CFSRC).
2182
2183 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
2184
2185         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2186         field for all INSN_MACRO's.
2187         * mips16-opc.c: same
2188
2189 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
2190
2191         * mips-opc.c (sync,cache): These are 3900 insns.
2192
2193 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
2194
2195         sh-opc.h (sh_table): Remove ftst/nan.
2196
2197 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
2198
2199         * mips-opc.c (ffc, ffs): Fix mask.
2200
2201 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
2202
2203         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2204         control registers.
2205
2206 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
2207
2208         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2209         (WR_HILO, RD_HILO, MOD_HILO): New macros.
2210
2211 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
2212
2213         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2214         (WR_HILO, RD_HILO, MOD_HILO): New macros.
2215
2216 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
2217
2218         * v850-dis.c (disassemble): Replace // with /* ... */
2219
2220 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
2221
2222         * sparc-opc.c: Add wr & rd for v9a asr's.
2223         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2224         (v9a_asr_reg_names): New variable.
2225         Patch from David Miller <davem@vger.rutgers.edu>.
2226
2227 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
2228
2229         * sparc-opc.c (v9notv9a): New insn type.
2230         (IMPDEP): Move to the end to not conflict with edge8 et al.
2231         Patch from David Miller <davem@vger.rutgers.edu>.
2232
2233 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
2234
2235         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2236
2237 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
2238
2239         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2240
2241 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
2242
2243         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2244         of disassemble_info structure to determine if an overlay address
2245         has a matching symbol in low memory.
2246
2247         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2248         new symbol_at_address_func field in disassemble_info structure.
2249
2250 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
2251
2252         * v850-opc.c (extract_d22): Use signed arithmatic.
2253
2254 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
2255
2256         * mips-opc.c: Three op mult is not an ISA insn.
2257
2258 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
2259
2260         * mips-opc.c: Fix formatting.
2261
2262 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
2263
2264         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2265         than assuming that char is signed.  Explicitly sign extend 16 bit
2266         values, rather than assuming that short is 16 bits.
2267         (OP_sI, OP_J, OP_DIR): Likewise.
2268
2269 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
2270
2271         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2272         system registers.
2273
2274 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
2275
2276         * v850-opc.c: Fix typo in comment.
2277
2278         * v850-dis.c (disassemble): Add test of processor type when
2279         determining opcodes.
2280
2281 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2282
2283         * configure.in: Use a diversion to set enable_shared before the
2284         arguments are parsed.
2285         * configure: Rebuild.
2286
2287 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2288
2289         * m68k-opc.c (TBL1): Use ! rather than `.
2290         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2291
2292 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
2293
2294         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2295
2296         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2297
2298         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2299         for mcf5200.
2300
2301         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2302         * aclocal.m4: Rebuild with new libtool.
2303         * configure: Rebuild.
2304
2305 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
2306
2307         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2308
2309 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
2310
2311         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2312
2313 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
2314
2315         * v850-opc.c (v850_opcodes): Further rearrangements.
2316
2317 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
2318
2319         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2320
2321 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
2322
2323         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2324         parser to work.
2325
2326 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
2327
2328         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2329
2330 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
2331
2332         * v850-opc.c: Initialise processors field of v850_opcode structure.
2333
2334 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
2335
2336         Merge changes from Martin Hunt:
2337
2338         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2339
2340         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2341         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2342         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2343
2344         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2345
2346         * d30v-dis.c (print_insn): First operand of d*i (delayed
2347         branch) instructions is relative.
2348
2349         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2350         (d30v_operand_table): Add IMM6S3 type.
2351         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2352
2353         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2354         and cmp instructions.
2355
2356         * d30v-opc.c: Correct entries for repeat*, and sat*.
2357         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2358         types. Correct several formats.
2359
2360         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2361
2362         * d30v-opc.c (pre_defined_registers): Change control registers.
2363
2364         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2365         SHORT_C2.  Manual was incorrect.
2366
2367         * d30v-dis.c (lookup_opcode):  Return value now indicates
2368         if an opcode has a short and a long form.  Used for deciding
2369         to append a ".s" or ".l".
2370         (print_insn): Append a ".s" to an instruction if it is
2371         the short form and ".l" if it is a long form. Do not append
2372         anything if the instruction has only one possible size.
2373
2374         * d30v-opc.c: Change mulx2h to require an even register.
2375         New form: SHORT_A2; a SHORT_A form that needs an even
2376         register as the first operand.
2377
2378         * d30v-dis.c (print_insn_d30v): Fix problem where the last
2379         instruction was not being disassembled if there were an odd
2380         number of instructions.
2381
2382         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
2383
2384 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
2385
2386         * v850-dis.c (disassemble): Improved display of register lists.
2387
2388 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
2389
2390         * sparc-opc.c (sparc_opcodes): Fix assembler args to
2391         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2392         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2393         fandnot1s, fandnot2s.
2394
2395 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
2396
2397         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2398
2399 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
2400
2401         * cgen-asm.c (cgen_parse_address): New argument resultp.
2402         All callers updated.
2403         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2404
2405 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
2406
2407         * mn10200-dis.c (disassemble): PC relative instructions are
2408         relative to the next instruction, not the current instruction.
2409
2410 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
2411
2412         * v850-dis.c (disassemble): Only signed extend values that are not
2413         returned by extract functions.
2414         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2415
2416 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
2417
2418         * v850-opc.c: Update comments.  Remove use of
2419         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
2420
2421 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
2422
2423         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2424
2425 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
2426
2427         * configure: Rebuilt with latest devo autoconf for NT support.
2428
2429 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
2430
2431         * v850-dis.c (disassemble): Use curly brace syntax for register
2432         lists.
2433
2434         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2435         where r0 is being used as a destination register.
2436
2437 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
2438
2439         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2440
2441 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
2442
2443         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2444
2445 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
2446
2447         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2448         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2449         opcodes..
2450
2451 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2452
2453         * configure (cgen_files): Add support for v850e target.
2454         * configure.in (cgen_files):  Add support for v850e target.
2455
2456 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
2457
2458         * configure (cgen_files): Add support for v850ea target.
2459         * configure.in (cgen_files):  Add support for v850ea target.
2460
2461 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
2462
2463         * configure.in (bfd_arc_arch): Add.
2464         * configure: Rebuild.
2465         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2466         * Makefile.in: Rebuild.
2467         * arc-dis.c, arc-opc.c: New files.
2468         * disassemble.c (ARCH_all): Define ARCH_arc.
2469         (disassembler): Add ARC support.
2470
2471 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
2472
2473         * v850-dis.c (disassemble): Add support for v850EA instructions.
2474
2475         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2476         (v850_opcodes): Add v850EA instructions.
2477
2478         * v850-dis.c (disassemble): Add support for v850E instructions.
2479
2480         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2481         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2482         insert_spe, extract_spe): New Functions.
2483         (v850_opcodes): Add v850E instructions.
2484
2485         * v850-opc.c: Reorganised and re-layed out to improve readability
2486         and portability.
2487
2488 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
2489
2490         * configure: Rebuild with autoconf 2.12.1.
2491
2492 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2493
2494         * aclocal.m4, configure: Rebuild with new automake patches.
2495
2496 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
2497
2498         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2499         * acinclude.m4: Just include acinclude.m4 from BFD.
2500         * aclocal.m4, configure: Rebuild.
2501
2502 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
2503
2504         * Makefile.am: New file, based on old Makefile.in.
2505         * acconfig.h: New file.
2506         * acinclude.m4: New file.
2507         * stamp-h.in: New file.
2508         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2509         Removed shared library handling; now handled by libtool.  Replace
2510         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
2511         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
2512         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
2513         handling in AC_OUTPUT.
2514         * dep-in.sed: Change .o to .lo.
2515         * Makefile.in: Now built with automake.
2516         * aclocal.m4: Now built with aclocal.
2517         * config.in, configure: Rebuild.
2518
2519 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
2520
2521         * mips-opc.c: Fix typo/thinko in "eret" instruction.
2522
2523 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
2524
2525         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2526         Make array const.
2527         * sparc-dis.c (sorted_opcodes): New static local.
2528         (struct opcode_hash): `opcode' is pointer to const element.
2529         (build_hash): First arg is now table of sorted pointers.
2530         (print_insn_sparc): Sort opcodes by sorting table of pointers.
2531         (compare_opcodes): Update.
2532
2533 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
2534
2535         * cgen-opc.c: #include <ctype.h>.
2536         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
2537         Handle case insensitive hashing.
2538         (hash_keyword_value): Change type of `value' to unsigned int.
2539
2540 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
2541
2542         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2543         precision FP, mark it as such.  Likewise for double precision
2544         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
2545         possible.
2546
2547 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
2548
2549         * ppc-opc.c (extract_nsi): make unsigned expression signed before
2550         negating it.
2551         (UNUSED): remove one level of parens, so MSVC doesn't choke on
2552         nesting depth when all the macros are expanded.
2553
2554 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
2555
2556         * sparc-opc.c: The fcmp v9a instructions take an integer register
2557         as a destination, not a floating point register.  From Christian
2558         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2559
2560 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
2561
2562         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2563         syntax.  From Roman Hodek
2564         <rnhodek@faui22c.informatik.uni-erlangen.de>.
2565
2566         * i386-dis.c (twobyte_has_modrm): Fix pand.
2567
2568 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
2569
2570         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2571
2572 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
2573
2574         * arm-dis.c: Add prototypes for arm_decode_shift and
2575         print_insn_arm.
2576
2577 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
2578
2579         * mips-opc.c: Add r3900 insns.
2580
2581 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2582
2583         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
2584         print delay slot instructions on the same line.  When using a PC
2585         relative load, add a comment with the value being loaded if it can
2586         be obtained.
2587
2588 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
2589
2590         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2591         to pushS/popS for segment regs and byte constant so that
2592         pushw/popw printed when in 16 bit data mode.
2593
2594         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2595         print cbtw, cwtd in 16 bit data mode.
2596         * i386-dis.c (putop): extra case W to support above.
2597
2598         * i386-dis.c (print_insn_x86): print addr32 prefix when given
2599         address size prefix in 16 bit address mode.
2600
2601 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
2602
2603         * sh-dis.c: Reindent.  Rename local variable fprintf to
2604         fprintf_fn.
2605
2606 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
2607
2608         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2609
2610 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
2611
2612         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2613           field membership.
2614         * mips16-opc.c (mip16_opcodes): same.
2615
2616 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
2617
2618         * m68k-opc.c (moveb): Change $d to %d.
2619
2620 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
2621
2622         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2623         (twobyte_has_modrm): Likewise.
2624         (grps): Likewise.
2625         (OP_MMX, OP_EM, OP_MS): New static functions.
2626
2627         * i386-dis.c: Revert patch of April 4.  The output now matches
2628         what gcc generates.
2629
2630 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
2631
2632         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2633         of $simm16.
2634
2635 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
2636
2637         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2638
2639 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
2640
2641         * Makefile.in (install): Depend upon installdirs.
2642         (installdirs): New target.
2643
2644 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
2645
2646         From Thomas Graichen <graichen@rzpd.de>:
2647         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2648         * configure: Rebuild.
2649
2650 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
2651
2652         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2653         Delete string{,s}.h support.
2654
2655 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
2656
2657         * cgen-asm.c (cgen_parse_operand_fn): New global.
2658         (cgen_parse_{{,un}signed_integer,address}): Update call to
2659         cgen_parse_operand_fn.
2660         (cgen_init_parse_operand): New function.
2661         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2662         from cgen_asm_init_parse.
2663         (m32r_cgen_assemble_insn): New operand `errmsg'.
2664         Delete call to as_bad, return error message to caller.
2665         (m32r_cgen_asm_hash_keywords): #if 0 out.
2666
2667 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2668
2669         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2670         not data register.
2671         [case 'J']: Fix typo in register name.
2672
2673 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
2674
2675         * configure.in: Substitute SHLIB_LIBS.
2676         * configure: Rebuild.
2677         * Makefile.in (SHLIB_LIBS): New variable.
2678         ($(SHLIB)): Use $(SHLIB_LIBS).
2679
2680 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
2681
2682         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2683
2684         * cgen-opc.c (hash_keyword_name): Improve algorithm.
2685
2686         * disassemble.c (disassembler): Handle m32r.
2687
2688 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
2689
2690         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2691         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2692         * Makefile.in (CFILES): Add them.
2693         (ALL_MACHINES): Add them.
2694         (dependencies): Regenerate.
2695         * configure.in (cgen_files): New variable.
2696         (bfd_m32r_arch): Add entry.
2697         * configure: Regenerate.
2698
2699 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2700
2701         * configure.in: Correct file names for bfd_mn10[23]00_arch.
2702         * configure: Rebuild.
2703
2704         * Makefile.in: Rebuild dependencies.
2705
2706         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2707
2708         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
2709         fdivp.
2710
2711 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
2712
2713         * Branched binutils 2.8.
2714
2715 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
2716
2717         * m10200-dis.c: Rename from mn10200-dis.c.
2718         * m10200-opc.c: Rename from mn10200-opc.c.
2719         * m10300-dis.c: Rename from mn10300-dis.c
2720         * m10300-opc.c: Rename from mn10300-opc.c.
2721         * Makefile.in: Update accordingly.
2722
2723         * mips16-opc.c: Add mul and dmul macros.
2724
2725 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
2726
2727         * makefile.vms: Update CFLAGS, add clean target.
2728
2729 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
2730
2731         * mips-opc.c: Add "wait".  From Ralf Baechle
2732         <ralf@gnu.ai.mit.edu>.
2733
2734         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2735         * configure, config.in: Rebuild.
2736         * sysdep.h: Include <stdlib.h> if it exists.
2737         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
2738         <string.h>.
2739         * Makefile.in: Rebuild dependencies.
2740
2741 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2742
2743         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
2744         Andrew Bray <andy@madhouse.demon.co.uk>.
2745
2746         * mips-opc.c: Add cast when setting mips_opcodes.
2747
2748 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
2749
2750         * v850-dis.c (disassemble):  Fix sign extension problem.
2751         * v850-opc.c (extract_d*):  Fix sign extension problems to make
2752         disassembly calculate branch offsets correctly.
2753
2754 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
2755
2756         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2757
2758         * mips-opc.c: Add dctr and dctw.
2759
2760 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2761
2762         * d30v-dis.c (print_insn): Change the way signed constants
2763         are displayed.
2764
2765 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2766
2767         * Makefile.in (BFD_H): New variable.
2768         (HFILES): New variable.
2769         (CFILES): Add all C files.
2770         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2771         Delete old dependencies, and build new ones.
2772         * dep-in.sed: New file.
2773
2774 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2775
2776         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2777
2778 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
2779
2780         * mn10200-opc.c: Change "trap" to "syscall".
2781         * mn10300-opc.c: Add new "syscall" instruction.
2782
2783 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2784
2785         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2786         mulul insns on the coldfire.
2787
2788 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
2789
2790         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2791         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2792         (print_insn_little_arm): Likewise.
2793
2794 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2795
2796         Based on patches from H.J. Lu <hjl@lucon.org>:
2797         * i386-dis.c (fetch_data): Add prototype.
2798         * m68k-dis.c (fetch_data): Add prototype.
2799         (dummy_print_address): Add prototype.  Make static.
2800         * ppc-opc.c (valid_bo): Add prototype.
2801         * sparc-dis.c (build_hash_table): Add prototype.
2802         (is_delayed_branch, compute_arch_mask): Add prototypes.
2803         (print_insn_sparc): Make several local variables const.
2804         (compare_opcodes): Change arguments to const PTR.  Add prototype.
2805         * sparc-opc.c (arg): Change name field to be const.
2806         (lookup_name, lookup_value): Add prototypes.  Change table and
2807         name parameters to be const.
2808         (sparc_encode_asi): Change name parameter to be const.
2809         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2810         (sparc_encode_sparclet_cpreg): Likewise.
2811         (sparc_decode_asi): Change return type to be const.
2812         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2813         (sparc_decode_sparclet_cpreg): Likewise.
2814
2815 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
2816
2817         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2818         Solaris doesn't like the combined options, and the -f is
2819         unnecessary.
2820         (stamp-tshlink, install): Likewise.
2821
2822 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
2823
2824         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2825         as relaxable.
2826
2827 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
2828
2829         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2830
2831 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
2832
2833         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2834         the mc68000.
2835
2836 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2837
2838         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2839
2840 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
2841
2842         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2843
2844 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
2845
2846         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2847
2848 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2849
2850         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2851         floatformat_to_double to make portable.
2852         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2853         precision float.
2854
2855 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
2856
2857         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2858         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2859
2860 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2861
2862         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2863         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2864
2865 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
2866
2867         * tic80-opc.c (LSI_SCALED): Renamed from this ...
2868         (OFF_SL_BR_SCALED): ... to this, and added the flag
2869         TIC80_OPERAND_BASEREL to the flags word.
2870         (tic80_opcodes): Replace all occurances of LSI_SCALED with
2871         OFF_SL_BR_SCALED.
2872
2873 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
2874
2875         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2876         Change mips_opcodes from const array to a pointer,
2877         and change bfd_mips_num_opcodes from const int to int,
2878         so that we can increase the size of the mips opcodes table
2879         dynamically.
2880
2881 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
2882
2883         * tic80-opc.c (tic80_predefined_symbols): Revert change to
2884         store BITNUM values in the table in one's complement form
2885         to match behavior when assembler is given a raw numeric
2886         value for a BITNUM operand.
2887         * tic80-dis.c (print_operand_bitnum): Ditto.
2888
2889 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2890
2891         * d30v-opc.c: Removed references to FLAG_X.
2892
2893 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2894
2895         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2896
2897 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2898
2899         * Makefile.in: Added d30v object files.
2900         * configure: (bfd_d30v_arch) Rebuilt.
2901         * configure.in: (bfd_d30v_arch) Added new case.
2902         * d30v-dis.c: New file.
2903         * d30v-opc.c: New file.
2904         * disassemble.c (disassembler) Add entry for d30v.
2905
2906 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
2907
2908         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2909         representations for the floating point BITNUM values.
2910
2911 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
2912
2913         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2914         in the table in one's complement form, as they appear in the
2915         actual instruction.
2916         (tic80_symbol_to_value): Use macros to access predefined
2917         symbol fields.
2918         (tic80_value_to_symbol): Ditto.
2919         (tic80_next_predefined_symbol): New function.
2920         * tic80-dis.c (print_operand_bitnum): Remove code that did
2921         one's complement for BITNUM values.
2922
2923 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
2924
2925         * makefile.vms: Remove 8 bit characters.  Update to latest
2926         gcc release.
2927
2928 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2929
2930         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2931
2932 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
2933
2934         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2935         (IMM24_PCREL): Likewise.
2936
2937 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2938
2939         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2940         address for an extended PC relative instruction that is not a
2941         branch.
2942
2943 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2944
2945         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2946         bytes_per_line.
2947
2948 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2949
2950         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2951         (tic80_opcodes): Sort entries so that long immediate forms
2952         come after short immediate forms, making it easier for
2953         assembler to select the right one for a given operand.
2954
2955 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2956
2957         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2958         display_endian.
2959         (print_insn_mips16): Likewise.
2960
2961 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2962
2963         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2964         a symbol class that restricts translation to just that
2965         class (general register, condition code, etc).
2966
2967 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2968
2969         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2970         and REG_DEST_E for register operands that have to be
2971         an even numbered register.  Add REG_FPA for operands that
2972         are one of the floating point accumulator registers.
2973         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2974         (tic80_opcodes): Change entries that need even numbered
2975         register operands to use the new operand table entries.
2976         Add "or" entries that are identical to "or.tt" entries.
2977
2978 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2979
2980         * mips16-opc.c: Add new cases of exit instruction for
2981         disassembler.
2982         * mips-dis.c (print_mips16_insn_arg): Display floating point
2983         registers in operands of exit instruction.  Print `$' before
2984         register names in operands of entry and exit instructions.
2985
2986 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2987
2988         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2989         pairs for all predefined symbols recognized by the assembler.
2990         Also used by the disassembling routines.
2991         (tic80_symbol_to_value): New function.
2992         (tic80_value_to_symbol): New function.
2993         * tic80-dis.c (print_operand_control_register,
2994         print_operand_condition_code, print_operand_bitnum):
2995         Remove private tables and use tic80_value_to_symbol function.
2996
2997 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2998
2999         * d10v-dis.c (print_operand): Change address printing
3000         to correctly handle PC wrapping.  Fixes PR11490.
3001
3002 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
3003
3004         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
3005         branches relaxable.
3006
3007 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
3008
3009         * mips-dis.c (print_insn_mips16): Set insn_info information.
3010         (print_mips16_insn_arg): Likewise.
3011
3012         * mips-dis.c (print_insn_mips16): Better handling of an extend
3013         opcode followed by an instruction which can not be extended.
3014
3015 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
3016
3017         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
3018         coldfire moveb instruction to not allow an address register as
3019         destination.  Although the documentation does not indicate that
3020         this is invalid, experiments uncovered unexpected behavior.
3021         Added a comment explaining the situation.  Thanks to Andreas
3022         Schwab for pointing this out to me.
3023
3024 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
3025
3026         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
3027         entries are presorted so that entries with the same mnemonic are
3028         adjacent to each other in the table.  Sort the entries for each
3029         instruction so that this is true.
3030
3031 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3032
3033         * m68k-dis.c: Include <libiberty.h>.
3034         (print_insn_m68k): Sort the opcode table on the most significant
3035         nibble of the opcode.
3036
3037 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
3038
3039         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
3040         "vsub", "vst", "xnor", and "xor" instructions.
3041         (V_a1): Renamed from V_a, msb of accumulator reg number.
3042         (V_a0): Add macro, lsb of accumulator reg number.
3043
3044 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
3045
3046         * tic80-dis.c (print_insn_tic80): Broke excessively long
3047         function up into several smaller ones and arranged for
3048         the instruction printing function to be callable recursively
3049         to print vector instructions that have both a load and a
3050         math instruction packed into a single opcode.
3051         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
3052         to explain why it comes after the other vector opcodes.
3053
3054 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
3055
3056         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
3057         move insns to handle immediate operands.
3058
3059 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3060
3061         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
3062         fix operand mask in the "moveml" entries for the coldfire.
3063
3064 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
3065
3066         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
3067         New macros for building vector instruction opcodes.
3068         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
3069         FMT_LI, which were unused.  The field is now a flags field.
3070         Remove some opcodes that are possible, but illegal, such
3071         as long immediate instructions with doubles for immediate
3072         values.  Add "vadd" and "vld" instructions.
3073
3074 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
3075
3076         * tic80-opc.c (tic80_operands): Reorder some table entries to make
3077         the order more logical.  Move the shift alias instructions ("rotl",
3078         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
3079         interspersed with the regular sr.x and sl.x instructions.  Add
3080         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3081         "sub", "subu", "swcr", and "trap".
3082
3083 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
3084
3085         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3086         (OFF_SL_PC): Renamed from OFF_SL.
3087         (OFF_SS_BR): New operand type for base relative operand.
3088         (OFF_SL_BR): New operand type for base relative operand.
3089         (REG_BASE): New operand type for base register operand.
3090         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3091         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3092         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3093         instructions.
3094         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3095         10 char field, padded with spaces on rhs, rather than a string
3096         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
3097         than old TIC80_OPERAND_RELATIVE.  Add support for new
3098         TIC80_OPERAND_BASEREL flag bit.
3099
3100 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
3101
3102         * tic80-dis.c (print_insn_tic80): Print floating point operands
3103         as floats.
3104         * tic80-opc.c (SPFI): Add single precision floating point
3105         immediate operand type.
3106         (ROTATE): Add rotate operand type for shifts.
3107         (ENDMASK): Add for shifts.
3108         (n): Macro for the 'n' bit.
3109         (i): Macro for the 'i' bit.
3110         (PD): Macro for the 'PD' field.
3111         (P2): Macro for the 'P2' field.
3112         (P1): Macro for the 'P1' field.
3113         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3114         "fcmp", and "fdiv".
3115
3116 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
3117
3118         * mn10200-dis.c (disassemble): Mask off unwanted bits after
3119         adding in current address for pc-relative operands.
3120
3121 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
3122
3123         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3124         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3125         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3126         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3127         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3128         REG_BASE_M_SI, REG_BASE_M_LI respectively.
3129         (REG_SCALED, LSI_SCALED): New operand types.
3130         (E): New macro for 'E' bit at bit 27.
3131         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3132         opcodes, including the various size flavors (b,h,w,d) for
3133         the direct load and store instructions.
3134
3135 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
3136
3137         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3138         in an instruction.
3139         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3140         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3141         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3142         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3143         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3144         masks with "MASK_* & ~M_*" to get the M bit reset.
3145         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3146
3147 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
3148
3149         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3150         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
3151         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3152         form.
3153         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3154         CC, SICR, and LICR table entries.
3155         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3156         "bcnd", and "brcr" opcodes.
3157
3158 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
3159
3160         * ppc-opc.c (powerpc_operands): Make comment match the
3161         actual fields (no shift field).
3162         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3163         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3164         partial implementation, work in progress.
3165         * tic80-opc.c (tic80_operands): Begin construction operands table.
3166         (tic80_opcodes): Continue populating opcodes table and start
3167         filling in the operand indices.
3168         (tic80_num_opcodes): Add this.
3169
3170 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
3171
3172         * m68k-opc.c: Add #B case for moveq.
3173
3174 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
3175
3176         * mn10300-dis.c (disassemble): Make sure all variables are initialized
3177         before they are used.
3178
3179 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
3180
3181         * v850-opc.c (v850_opcodes): Put curly-braces around operands
3182         for "breakpoint" instruction.
3183
3184 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
3185
3186         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3187         (dep): Use ALL_CFLAGS rather than CFLAGS.
3188
3189 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3190
3191         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3192         flag.
3193
3194 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
3195
3196         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3197         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3198
3199 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3200
3201         * mips16-opc.c: Add "abs".
3202
3203 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
3204
3205         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3206         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3207         (disassembler): Add bfd_arch_tic80 support to set disassemble
3208         to print_insn_tic80.
3209         * tic80-dis.c (print_insn_tic80): Add stub.
3210
3211 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
3212
3213         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3214         * configure: Regenerate with autoconf.
3215         * tic80-dis.c: Add file.
3216         * tic80-opc.c: Add file.
3217
3218 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3219
3220         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
3221
3222 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
3223
3224         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3225         (mn10200_opcodes): Use it for some logicals and btst insns.
3226         Add "break" and "trap" instructions.
3227
3228         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3229
3230         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3231
3232 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3233
3234         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3235         relative load or add now depends upon whether the instruction is
3236         in a delay slot.
3237
3238 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
3239
3240         * mn10200-dis.c: Finish writing disassembler.
3241         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3242         Fix mask for "jmp (an)".
3243
3244         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3245         handle endianness issues for mn10300.
3246
3247         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3248
3249 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
3250
3251         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3252         instruction.  Fix opcode field for "movb (imm24),dn".
3253
3254         * mn10200-opc.c (mn10200_operands): Fix insertion position
3255         for DI operand.
3256
3257 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
3258
3259         * mn10200-opc.c: Create mn10200 opcode table.
3260         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
3261         but moving along nicely.
3262
3263 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3264
3265         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
3266
3267 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
3268
3269         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3270         specifiers for fmovem* instructions.
3271
3272 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3273
3274         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3275
3276 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
3277
3278         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3279         with dsrl.
3280
3281 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
3282
3283         * mn10300-opc.c: Add some comments explaining the various
3284         operands and such.
3285
3286         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3287
3288 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3289
3290         * m68k-dis.c (print_insn_arg): Handle new < and > operand
3291         specifiers.
3292
3293         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3294         operand specifiers in fmovm* instructions.
3295
3296 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
3297
3298         * ppc-opc.c (insert_li): Give an error if the offset has the two
3299         least significant bits set.
3300
3301 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3302
3303         * mips-dis.c (print_insn_mips16): Separate the instruction from
3304         the arguments with a tab, not a space.
3305
3306 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
3307
3308         * mn10300-dis.c (disasemble): Finish conversion to '$' as
3309         register prefix.
3310
3311         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3312         mov am,(imm32,sp).
3313
3314 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
3315
3316         * configure: Rebuild with autoconf 2.12.
3317
3318         Add support for mips16 (16 bit MIPS implementation):
3319         * mips16-opc.c: New file.
3320         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3321         (mips16_reg_names): New static array.
3322         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3323         after seeing a 16 bit symbol.
3324         (print_insn_little_mips): Likewise.
3325         (print_insn_mips16): New static function.
3326         (print_mips16_insn_arg): New static function.
3327         * mips-opc.c: Add jalx instruction.
3328         * Makefile.in (mips16-opc.o): New target.
3329         * configure.in: Use mips16-opc.o for bfd_mips_arch.
3330         * configure: Rebuild.
3331
3332 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
3333
3334         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3335         operand specifiers in *save, *restore and movem* instructions.
3336
3337         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3338         the coldfire.
3339
3340         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3341         register operands for immediate arithmetic, not, neg, negx, and
3342         set according to condition instructions.
3343
3344         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3345         specifier of the effective-address operand in immediate forms of
3346         arithmetic instructions.  The specifier for the immediate operand
3347         notes how and where the constant will be stored.
3348
3349 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
3350
3351         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3352         opcode.
3353
3354         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3355         register prefix.
3356
3357         * mn10300-dis.c (disassemble): Prefix registers with '%'.
3358
3359 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
3360
3361         * mn10300-dis.c (disassemble): Handle register lists.
3362
3363         * mn10300-opc.c: Fix handling of register list operand for
3364         "call", "ret", and "rets" instructions.
3365
3366         * mn10300-dis.c (disassemble): Print PC-relative and memory
3367         addresses symbolically if possible.
3368         * mn10300-opc.c: Distinguish between absolute memory addresses,
3369         pc-relative offsets & random immediates.
3370
3371         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3372         in 7 byte insns.
3373         (disassemble): Handle SPLIT and EXTENDED operands.
3374
3375 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
3376
3377         * mn10300-dis.c: Rough cut at printing some operands.
3378
3379         * mn10300-dis.c: Start working on disassembler support.
3380         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3381
3382         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3383         list.
3384         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3385
3386 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3387
3388         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3389
3390 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
3391
3392         * mn10300-opc.c (mn10300_opcodes): Demand parens around
3393         register argument is calls and jmp instructions.
3394
3395 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
3396
3397         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3398         getx operand.  Fix opcode for mulqu imm,dn.
3399
3400 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
3401
3402         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3403         in MN10300_OPERAND_SPLIT operands for how many bits
3404         appear in the basic insn word.  Add IMM32_HIGH24,
3405         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3406         (mn10300_opcodes): Use new operands as needed.
3407
3408         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3409         for bset, bclr, btst instructions.
3410         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3411
3412         * mn10300-opc.c (mn10300_operands): Remove many redundant
3413         operands.  Update opcode table as appropriate.
3414         (IMM32): Add MN10300_OPERAND_SPLIT flag.
3415         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3416
3417 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
3418
3419         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3420         operands (for indexed load/stores).  Fix bitpos for DI
3421         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3422         few instructions that insert immediates/displacements in the
3423         middle of the instruction.  Add IMM8E for 8 bit immediate in
3424         the extended part of an instruction.
3425         (mn10300_operands): Use new opcodes as appropriate.
3426
3427 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3428
3429         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3430         sequential so the assembler never parallelizes it with
3431         other instructions.
3432
3433 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
3434
3435         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3436         a data/address register that appears in register field 0
3437         and register field 1.
3438         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3439
3440 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
3441
3442         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3443         standard disassembly.
3444
3445         * alpha-opc.c (alpha_operands): Rearrange flags slot.
3446         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3447         Recategorize PALcode instructions.
3448
3449 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
3450
3451         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3452
3453 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
3454
3455         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3456         there are no operand types.
3457
3458 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
3459
3460         * v850-opc.c (D9_RELAX): Renamed from D9, all references
3461         changed.
3462         (v850_operands): Make sure D22 immediately follows D9_RELAX.
3463
3464 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
3465
3466         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3467
3468 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
3469
3470         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3471         and sst.w instructions.
3472
3473         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3474         "bCC"instructions).
3475
3476 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3477
3478         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3479         and the arguments.
3480
3481 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
3482
3483         * ppc-opc.c (PPCPWR2): Define.
3484         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3485         it.
3486
3487 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
3488
3489         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3490         field for movhu instruction.
3491
3492         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3493         cast value to "long" not "signed long" to keep hpux10
3494         compiler quiet.
3495
3496 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
3497
3498         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3499         for mov (abs16),DN.
3500
3501         * mn10300-opc.c (FMT*): Remove definitions.
3502
3503         * mn10300-opc.c (mn10300_opcodes): Fix destination register
3504         for shift-by-register opcodes.
3505
3506         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3507         into [AD][MN][01] for encoding the position of the register
3508         in the opcode.
3509
3510 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
3511
3512         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3513         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3514
3515 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
3516
3517         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3518         Fix various typos.  Add "PAREN" operand.
3519         (MEM, MEM2): Define.
3520         (mn10300_opcodes): Surround all memory addresses with "PAREN"
3521         operands.  Fix several typos.
3522
3523         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3524         changes.
3525
3526 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
3527
3528         * mn10300-opc.c (FMT_XX): Renumber starting at one.
3529         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
3530         at this time.
3531         (mn10300_opcodes): Break opcode format out into its own field.
3532         Update many operand fields to deal with signed vs unsigned
3533         issues.  Fix one or two typos in the "mov" instruction
3534         opcode, mask and/or operand fields.
3535
3536 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3537
3538         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3539         m68851 wasn't reset.
3540
3541 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3542
3543         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3544         all opcodes.  Very rough cut at operands for all opcodes.
3545
3546         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3547         opcode table.
3548
3549 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
3550
3551         * mn10200-opc.c, mn10300-opc.c: New files.
3552         * mn10200-dis.c, mn10300-dis.c: New files.
3553         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3554         * disassemble.c: Break mn10x00 support into 10200 and 10300
3555         support.
3556         * configure.in: Likewise.
3557         * configure: Rebuilt.
3558
3559 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3560
3561         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3562
3563 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
3564
3565         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3566         MN10x00 processors.
3567         * disassemble (ARCH_mn10x00): Define.
3568         (disassembler): Handle bfd_arch_mn10x00.
3569         * configure.in: Recognize bfd_mn10x00_arch.
3570         * configure: Rebuilt.
3571
3572 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
3573
3574         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
3575         accordingly.  Don't declare functions using op_rtn.
3576
3577 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
3578
3579         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
3580         params to be more standard.
3581         * (disassemble):  Print absolute addresses and symbolic names for
3582         branch and jump targets.
3583         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
3584         bit operands.
3585         * (v850_opcodes):  Add breakpoint insn.
3586
3587 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3588
3589         * m68k-opc.c: Move the fmovemx data register cases before the
3590         other cases, so that they get recognized before the data register
3591         does gets treated as a degenerate register list.
3592
3593 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3594
3595         * mips-opc.c: Add a case for "div" and "divu" with two registers
3596         and a destination of $0.
3597
3598 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
3599
3600         * mips-dis.c (print_insn_arg): Add prototype.
3601         (_print_insn_mips): Ditto.
3602
3603 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3604
3605         * mips-dis.c (print_insn_arg): Print condition code registers as
3606         $fccN.
3607
3608 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
3609
3610         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3611
3612 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
3613
3614         * v850-dis.c (disassemble): Make static.  Provide prototype.
3615
3616 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
3617
3618         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3619         in range checks.
3620
3621 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
3622
3623         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3624         ']' characters into the output stream.
3625         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3626         Add "memop" field to all opcodes (for the disassembler).
3627         Reorder opcodes so that "nop" comes before "mov" and "jr"
3628         comes before "jarl".
3629
3630         * v850-dis.c (print_insn_v850): Fix typo in last change.
3631
3632         * v850-dis.c (print_insn_v850): Properly handle disassembling
3633         a two byte insn at the end of a memory region when the memory
3634         region's size is only two byte aligned.
3635
3636         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3637
3638         * v850-dis.c (v850_reg_names): Define.
3639         (v850_sreg_names, v850_cc_names): Likewise.
3640         (disassemble): Very rough cut at printing operands (unformatted).
3641
3642         * v850-opc.c (BOP_MASK): Fix.
3643         (v850_opcodes): Fix mask for jarl and jr.
3644
3645         * v850-dis.c: New file.  Skeleton for disassembler support.
3646         * Makefile.in Remove v850 references, they're not needed here.
3647         * configure.in: Add v850-dis.o when building v850 toolchains.
3648         * configure: Rebuilt.
3649         * disassemble.c (disassembler): Call v850 disassembler.
3650
3651         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3652         (insert_d8_6, extract_d8_6): New functions.
3653         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3654         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3655         Add D8_6.
3656         (IF4A, IF4B): Use "D7" instead of "D7S".
3657         (IF4C, IF4D): Use "D8_7" instead of "D8".
3658         (IF4E, IF4F): New.  Use "D8_6".
3659         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
3660         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
3661
3662         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3663         (v850_operands): Change D16 to D16_15, use special insert/extract
3664         routines.  New new D16 that uses the generic insert/extract code.
3665         (IF7A, IF7B): Use D16_15.
3666         (IF7C, IF7D): New.  Use D16.
3667         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3668
3669         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3670         message.  Issue an error if the branch offset is odd.
3671
3672         * v850-opc.c: Add notes about needing special insert/extract
3673         for all the load/store insns, except "ld.b" and "st.b".
3674
3675         * v850-opc.c (insert_d22, extract_d22): New functions.
3676         (v850_operands): Use insert_d22 and extract_d22 for
3677         D22 operands.
3678         (insert_d9): Fix range check.
3679
3680 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3681
3682         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3683         and set bits field to D9 and D22 operands.
3684
3685 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
3686
3687         * v850-opc.c (v850_operands): Define SR2 operand.
3688         (v850_opcodes): "ldsr" uses R1,SR2.
3689
3690         * v850-opc.c (v850_opcodes): Fix opcode specs for
3691         sld.w, sst.b, sst.h, sst.w, and nop.
3692
3693 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
3694
3695         * v850-opc.c (v850_opcodes): Add null opcode to mark the
3696         end of the opcode table.
3697
3698 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3699
3700         * d10v-opc.c (pre_defined_registers): Added register pairs,
3701         "r0-r1", "r2-r3", etc.
3702
3703 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
3704
3705         * v850-opc.c (v850_operands): Make I16 be a signed operand.
3706         Create I16U for an unsigned 16bit mmediate operand.
3707         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3708
3709         * v850-opc.c (v850_operands): Define EP operand.
3710         (IF4A, IF4B, IF4C, IF4D): Use EP.
3711
3712         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3713         with immediate operand, "movhi".  Tweak "ldsr".
3714
3715         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3716         correct.  Get sld.[bhw] and sst.[bhw] closer.
3717
3718         * v850-opc.c (v850_operands): "not" is a two byte insn
3719
3720         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3721
3722         * v850-opc.c (v850_operands): D16 inserts at offset 16!
3723
3724         * v850-opc.c (two): Get order of words correct.
3725
3726         * v850-opc.c (v850_operands): I16 inserts at offset 16!
3727
3728         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3729         register source and destination operands.
3730         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3731
3732         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
3733         same thinko in "trap" opcode.
3734
3735         * v850-opc.c (v850_opcodes): Add initializer for size field
3736         on all opcodes.
3737
3738         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
3739         Add D8 for 8-bit unsigned field in short load/store insns.
3740         (IF4A, IF4D): These both need two registers.
3741         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
3742         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3743         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
3744         for "ldsr" and "stsr".
3745         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3746         is unsigned.
3747
3748         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3749         short store word (sst.w).
3750
3751 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3752
3753         * v850-opc.c (v850_operands): Added insert and extract fields,
3754         pointers to functions that handle unusual operand encodings.
3755
3756 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
3757
3758         * v850-opc.c (v850_opcodes): Enable "trap".
3759
3760         * v850-opc.c (v850_opcodes): Fix order of displacement
3761         and register for "set1", "clr1", "not1", and "tst1".
3762
3763 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
3764
3765         * v850-opc.c (v850_operands): Add "B3" support.
3766         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3767         and "tst1".
3768
3769         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3770
3771         * v850-opc.c: Close unterminated comment.
3772
3773 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3774
3775         * v850-opc.c (v850_operands): Add flags field.
3776         (v850_opcodes): add move opcodes.
3777
3778 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3779
3780         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3781         * configure: (bfd_v850v_arch) Add new case.
3782         * configure.in: (bfd_v850_arch) Add new case.
3783         * v850-opc.c: New file.
3784
3785 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
3786
3787         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3788
3789 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3790
3791         * d10v-opc.c: Add additional information to the opcode
3792         table to help determinine which instructions can be done
3793         in parallel.
3794
3795 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
3796
3797         * mpw-make.sed: Update editing of include pathnames to be
3798         more general.
3799
3800 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
3801
3802         * arm-opc.h: Added "bx" instruction definition.
3803
3804 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
3805
3806         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3807
3808 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3809
3810         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3811
3812 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3813
3814         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3815
3816 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
3817
3818         * makefile.vms: Update for alpha-opc changes.
3819
3820 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3821
3822         * i386-dis.c (print_insn_i386): Actually return the correct value.
3823         (ONE, OP_ONE): #ifdef out; not used.
3824
3825 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3826
3827         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3828         Changed subi operand type to treat 0 as 16.
3829
3830 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
3831
3832         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
3833         <rose@netcom.com>.
3834
3835 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
3836
3837         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3838         memory transfer instructions. Add new format string entries %h and %s.
3839         * arm-dis.c: (print_insn_arm): Provide decoding of the new
3840         formats %h and %s.
3841
3842 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3843
3844         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3845         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3846
3847 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
3848
3849         * alpha-dis.c (print_insn_alpha_osf): Remove.
3850         (print_insn_alpha_vms): Remove.
3851         (print_insn_alpha): Make globally visible.  Chose the register
3852         names based on info->flavour.
3853         * disassemble.c: Always return print_insn_alpha for the alpha.
3854
3855 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3856
3857         * d10v-dis.c (dis_long): Handle unknown opcodes.
3858
3859 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3860
3861         * d10v-opc.c: Changes to support signed and unsigned numbers.
3862         All instructions with the same name that have long and short forms
3863         now end in ".l" or ".s".  Divs added.
3864         * d10v-dis.c: Changes to support signed and unsigned numbers.
3865
3866 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3867
3868         * d10v-dis.c: Change all functions to use info->print_address_func.
3869
3870 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3871
3872         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3873         move ccr/sr insns more strict so that the disassembler only
3874         selects them when the addressing mode is data register.
3875
3876 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3877         * d10v-opc.c (pre_defined_registers):  Declare.
3878         * d10v-dis.c (print_operand): Now uses pre_defined_registers
3879         to pick a better name for the registers.
3880
3881 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
3882
3883         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
3884         operands for fexpand and fpmerge.  From Christian Kuehnke
3885         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3886
3887 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
3888
3889         * alpha-dis.c (print_insn_alpha): No longer the user-visible
3890         print routine.  Take new regnames and cpumask arguments.
3891         Kill the environment variable nonsense.
3892         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
3893         (print_insn_alpha_vms): New function.  Do VMS style regnames.
3894         * disassemble.c (disassembler): Test bfd flavour to pick
3895         between OSF and VMS routines.  Default to OSF.
3896
3897 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
3898
3899         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3900         * configure: Rebuild.
3901         * Makefile.in (install): Use @INSTALL_SHLIB@.
3902
3903 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3904
3905         * configure: (bfd_d10v_arch) Add new case.
3906         * configure.in: (bfd_d10v_arch) Add new case.
3907         * d10v-dis.c: New file.
3908         * d10v-opc.c: New file.
3909         * disassemble.c (disassembler) Add entry for d10v.
3910
3911 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3912
3913         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3914         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3915
3916 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
3917
3918         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
3919         distinguish between variants of the instruction set.
3920         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
3921         distinguish between variants of the instruction set.
3922
3923 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3924
3925         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3926         the 8086 instruction set.
3927         * i386-dis.c:  General cleanups.  Make most things static.  Add
3928         prototypes.  Get rid of static variables aflags and dflags.  Pass
3929         them as args (to almost everything).
3930
3931 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3932
3933         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3934
3935         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3936
3937         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3938         if the next arg is marked with SRC_IN_DST.  Gross.
3939
3940         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3941         we're looking for and find EXR.
3942
3943         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3944         if we're looking for KBIT and we don't find it.
3945
3946         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3947         for L_3 and L_2.
3948
3949         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3950         3bit immediate operands.
3951
3952 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3953
3954         * Released binutils 2.7.
3955
3956         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3957         <kkaempf@progis.ac-net.de>.
3958
3959 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3960
3961         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3962
3963 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3964
3965         * sparc-dis.c (print_insn_sparclite):  New routine to print
3966         sparclite instructions.
3967
3968 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3969
3970         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3971
3972 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3973
3974         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3975         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3976         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3977
3978 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3979
3980         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3981         Use autoconf-set values.
3982         (docdir, oldincludedir): Removed.
3983         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3984
3985 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3986
3987         * alpha-opc.c: New file.
3988         * alpha-opc.h: Remove.
3989         * alpha-dis.c: Complete rewrite to use new opcode table.
3990         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3991         * configure: Rebuild with autoconf 2.10.
3992         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3993         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3994         alpha-opc.h.
3995         (alpha-opc.o): New target.
3996
3997 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3998
3999         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
4000         Set imm_added_to_rs1 even if the source and destination register
4001         are not the same.
4002
4003         * sparc-opc.c: Add some two operand forms of the wr instruction.
4004
4005 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
4006
4007         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
4008         to just "mode".
4009
4010         * disassemble.c (disassembler): Handle H8/S.
4011         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
4012
4013 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
4014
4015         * sparc-opc.c: Add beq/teq as aliases for be/te.
4016
4017         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
4018         <sergei@msil.sps.mot.com>.
4019
4020 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
4021
4022         * makefile.vms: New file.
4023
4024         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
4025
4026 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
4027
4028         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
4029         regardless of plen.
4030
4031 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
4032
4033         * i386-dis.c (OP_OFF): Call append_prefix.
4034
4035 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
4036
4037         * ppc-opc.c (instruction encoding macros): Add explicit casts to
4038         unsigned long to silence a warning from the Solaris PowerPC
4039         compiler.
4040
4041 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
4042
4043         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
4044
4045 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
4046
4047         * sparc-dis.c (X_IMM,X_SIMM): New macros.
4048         (X_IMM13): Delete.
4049         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
4050         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
4051         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
4052         cpush, cpusha, cpull sparclet insns.
4053
4054 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
4055
4056         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
4057
4058 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
4059
4060         * sparc-opc.c: Set F_FBR on floating point branch instructions.
4061         Set F_FLOAT on other floating point instructions.
4062
4063 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
4064
4065         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
4066         registers.
4067         (powerpc_opcodes): Add 860/821 specific SPRs.
4068
4069 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
4070
4071         * configure.in: Permit --enable-shared to specify a list of
4072         directories.  Set and substitute BFD_PICLIST.
4073         * configure: Rebuild.
4074         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
4075         uses.  Set to @BFD_PICLIST@.
4076
4077 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
4078
4079         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4080         not "abs", which may be needed for the absolute in something
4081         like btst #0,@10:8.  Print L_3 immediates separately from other
4082         immediates.  Change ABSMOV reference to ABS8MEM.
4083
4084 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
4085
4086         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4087         (current_arch_mask): New static global.
4088         (compute_arch_mask): New static function.
4089         (print_insn_sparc): Delete sparc_v9_p.  New static local
4090         current_mach.  Resort opcode table if current_mach changes.
4091         Generalize "insn not supported" test.
4092         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4093         Delete test for v9/!v9.
4094         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4095         (v6notlet): Define.
4096         (brfc): Split into CBR and FBR for coprocessor/fp branches.
4097         (brfcx): Renamed to FBRX.
4098         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
4099         coprocessor mnemonics are not supported on the sparclet).
4100         (condf): Renamed to CONDF.
4101         (SLCBCC2): Delete F_ALIAS flag.
4102
4103 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
4104
4105         * sparc-opc.c (sparc_opcodes): rd must be 0 for
4106         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
4107
4108 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
4109
4110         * Makefile.in (config.status): Depend upon BFD VERSION file, so
4111         that the shared library version number is set correctly.
4112
4113 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
4114
4115         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
4116         Miles Bader <miles@gnu.ai.mit.edu>.
4117         * configure: Rebuild.
4118
4119 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
4120
4121         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4122         malloc.
4123
4124 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
4125
4126         * configure: Rebuild with autoconf 2.8.
4127
4128 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
4129
4130         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4131         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4132
4133 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
4134
4135         * configure.in: Don't set SHLIB or SHLINK to an empty string,
4136         since they appear as targets in Makefile.in.
4137         * configure: Rebuild.
4138
4139 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
4140
4141         * mpw-make.sed: Edit out shared library support bits.
4142
4143 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
4144
4145         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4146         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4147         (sparc_opcodes): Add sparclet insns.
4148         (sparclet_cpreg_table): New static local.
4149         (sparc_{encode,decode}_sparclet_cpreg): New functions.
4150         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4151
4152 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
4153
4154         * i386-dis.c (index16): New static variable.
4155         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4156         other way around.
4157         (OP_indirE): Return result of OP_E.
4158         (OP_E): Check for 16 bit addressing mode, and disassemble
4159         correctly.  Optimised 32 bit case a little.  Don't print
4160         "(base,index,scale)" when sib specifies only an offset.
4161
4162 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
4163
4164         * configure.in: Set and substitute SHLIB_DEP.
4165         * configure: Rebuild.
4166         * Makefile.in (SHLIB_DEP): New variable.
4167         (LIBIBERTY_LISTS, BFD_LIST): New variables.
4168         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
4169         COMMON_SHLIB, add them to piclist with appropriate modifications.
4170         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
4171         here: just use piclist.
4172
4173 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
4174
4175         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4176         (print_insn_sparc): Rewrite v9/not-v9 tests.
4177         (compare_opcodes): Likewise.
4178         * sparc-opc.c (MASK_<ARCH>): Define.
4179         (v6,v7,v8,sparclite,v9,v9a): Redefine.
4180         (sparclet,v6notv9): Define.
4181         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
4182         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4183
4184 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
4185
4186         * configure.in: Call AC_PROG_CC before configure.host.
4187         * configure: Rebuild.
4188
4189         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4190
4191 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
4192
4193         * i386-dis.c (onebyte_has_modrm): New static array.
4194         (twobyte_has_modrm): New static array.
4195         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4196
4197 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
4198
4199         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4200         $(SHLINK).
4201
4202 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
4203
4204         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4205         doesn't conflict.
4206
4207 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
4208
4209         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4210         m68010up, not just m68020up | cpu32.
4211
4212         * Makefile.in (SONAME): New variable.
4213         ($(SHLINK)): Make a link to the transformed name, as well.
4214         (stamp-tshlink): New target.
4215         (install): Skip stamp-tshlink during install.
4216
4217 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
4218
4219         * configure.in: Call AC_ARG_PROGRAM.
4220         * configure: Rebuild.
4221         * Makefile.in (program_transform_name): New variable.
4222         (install): Transform library name before installing it.
4223
4224 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
4225
4226         * i960-dis.c (mem): Add HX dcinva instruction.
4227
4228         Support for building as a shared library, based on patches from
4229         Alan Modra <alan@spri.levels.unisa.edu.au>:
4230         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4231         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4232         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4233         * configure: Rebuild.
4234         * Makefile.in (ALLLIBS): New variable.
4235         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4236         (COMMON_SHLIB, SHLINK): New variables.
4237         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4238         (STAGESTUFF): Remove variable.
4239         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4240         (stamp-piclist, piclist): New targets.
4241         ($(SHLIB), $(SHLINK)): New targets.
4242         ($(OFILES)): Depend upon stamp-picdir.
4243         (disassemble.o): Build twice if PICFLAG is set.
4244         (MOSTLYCLEAN): Add pic/*.o.
4245         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4246         (distclean): Remove pic and stamp-picdir.
4247         (install): Install shared libraries.
4248         (stamp-picdir): New target.
4249
4250 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
4251
4252         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4253         Print unknown instruction as "unknown", rather than in hex.
4254
4255 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
4256
4257         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4258
4259 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
4260
4261         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4262
4263 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
4264
4265         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4266         when necessary.  From Ulrich Drepper
4267         <drepper@myware.rz.uni-karlsruhe.de>.
4268
4269 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
4270
4271         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4272         sparc_num_opcodes.  Update architecture enum values.
4273         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4274         (sparc_opcode_lookup_arch): New function.
4275         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4276         (sparc_opcodes): Add v9a shutdown insn.
4277
4278 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
4279
4280         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4281         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
4282         architecture.
4283         (print_insn_sparc64): Deleted.
4284         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4285         print_insn_sparc.
4286
4287         * sparc-opc.c (architecture_pname): Add v9a.
4288
4289 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
4290
4291         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4292         incorrectly defined as 0x16 when it should be 0x15.
4293         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4294         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
4295         excb (exception barrier) which is defined in the Alpha
4296         Architecture Handbook version 2.
4297         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4298         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
4299         disassembled as or, for example.
4300
4301 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
4302
4303         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4304         (_print_insn_mips): Change i from int to unsigned int.
4305
4306 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
4307
4308         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4309         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
4310
4311 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
4312
4313         * i386-dis.c: Added Pentium Pro instructions.
4314
4315 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4316
4317         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4318         being for Power2.
4319
4320 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4321
4322         * sh-opc.h (sh_nibble_type): Added REG_B.
4323         (sh_arg_type): Added A_REG_B.
4324         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4325         and stc.l opcodes.
4326         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4327
4328 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4329
4330         * disassemble.c (disassembler): Use new bfd_big_endian macro.
4331
4332 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4333
4334         * Makefile.in (distclean): Remove stamp-h.  From Ronald
4335         F. Guilmette <rfg@monkeys.com>.
4336
4337 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
4338
4339         From David Mosberger-Tang  <davidm@azstarnet.com>:
4340         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4341         instruction.
4342
4343 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4344
4345         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4346         (sh_table): Added many SH3 opcodes.
4347         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4348
4349 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4350
4351         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4352         (subco,subco.): Mark this PPC, not PPCCOM.
4353
4354 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
4355
4356         * configure: Rebuild with autoconf 2.7.
4357
4358 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4359
4360         * configure: Rebuild with autoconf 2.6.
4361
4362 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
4363
4364         * configure.in: Sort list of architectures.  Accept but do nothing
4365         for alliant, convex, pyramid, romp, and tahoe.
4366
4367 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
4368
4369         * a29k-dis.c (print_special): Change num to unsigned int.
4370
4371 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
4372
4373         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4374         shifting it.
4375
4376 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
4377
4378         * configure.in: Call AC_CHECK_PROG to find and cache AR.
4379         * configure: Rebuilt.
4380
4381 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
4382
4383         * configure.in: Add case for bfd_i860_arch.
4384         * configure: Rebuild.
4385
4386 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
4387
4388         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4389         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4390         (NEXTDOUBLE): Likewise.
4391         (print_insn_m68k): Don't match fmoveml if there is more than one
4392         register in the list.
4393         (print_insn_arg): Handle a place of '8' for a type of 'L'.
4394
4395 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4396
4397         * m68k-opc.c: Use #W rather than #w.
4398         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4399
4400 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
4401
4402         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4403         and likewise for all the dbxx opcodes.
4404
4405 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
4406
4407         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4408
4409 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
4410
4411         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4412         the VR4100 specific instructions to the mips_opcodes structure.
4413
4414 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
4415
4416         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4417         ugly Metrowerks bug in CW6, is fixed in CW7.
4418
4419 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4420
4421         * ppc-opc.c (whole file): Add flags for common/any support.
4422
4423 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
4424
4425         * Makefile.in (BISON): Remove macro.
4426         (FLAGS_TO_PASS): Remove BISON.
4427
4428 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
4429
4430         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
4431
4432         * m68k-dis.c (print_insn_m68k): Recognize all two-word
4433         instructions that take no args by looking at the match mask.
4434         (print_insn_arg): Always print "%" before register names.
4435         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4436         [case '_']: Don't print "@#" before address.
4437         [case 'J']: Use "%s" as format string, not register name.
4438         [case 'B']: Treat place == 'C' like 'l' and 'L'.
4439
4440 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
4441
4442         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4443         name correctly.
4444
4445 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
4446
4447         From David Mosberger-Tang  <davidm@azstarnet.com>
4448
4449         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4450         (alpha_insn_set): added definitions for VAX floating point
4451         instructions (Unix compilers don't generate these, but handcoded
4452         assembly might still use them).
4453
4454         * alpha-dis.c (print_insn_alpha): added support for disassembling
4455         the miscellaneous instructions in the Alpha instruction set.
4456
4457 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
4458
4459         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4460         no longer create sysdep.h, sed ppc-opc.c to work around a
4461         serious Metrowerks C bug.
4462         * mpw-make.in: Remove.
4463         * mpw-make.sed: New file, used by mpw-configure to edit
4464         Makefile.in into an MPW makefile.
4465
4466 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
4467
4468         * Makefile.in (maintainer-clean): New synonym for realclean.
4469
4470 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4471
4472         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4473         which use '0', '1', and '2' instead.  Specify the proper size for
4474         a pmove immediate operand.  Correct the pmovefd patterns to be
4475         moves to a register, not from a register.
4476         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4477
4478 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
4479
4480         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4481         %psr, %wim, %tbr as F_NOTV9.
4482
4483 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
4484
4485         * Makefile.in (Makefile): Just rebuild Makefile when running
4486         config.status.
4487         (config.h, stamp-h): New targets.
4488         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4489         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
4490         rebuilding config.h.
4491         * configure: Rebuild.
4492
4493         * mips-opc.c: Change unaligned loads and stores with "t,A"
4494         operands to use "t,A(b)".
4495
4496 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4497
4498         * sh-dis.c (print_insn_shx): Add F_FR0 support.
4499
4500 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4501
4502         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4503         until 3 instead of until 2.
4504
4505 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
4506
4507         * Makefile.in (ALL_CFLAGS): Define.
4508         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4509         (MOSTLYCLEAN): Add config.log.
4510         (distclean): Don't remove config.log.
4511         * configure.in: Substitute HDEFINES.
4512         * configure: Rebuild.
4513
4514 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4515
4516         * sh-opc.h (sh_arg_type): Add F_FR0.
4517         (sh_table, case fmac): Add F_FR0 as first argument.
4518
4519 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4520
4521         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4522
4523 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
4524
4525         * sparc-dis.c: Remove all references to NO_V9.
4526
4527 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
4528
4529         * aclocal.m4: Just include ../bfd/aclocal.m4.
4530         * configure: Rebuild.
4531
4532 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
4533
4534         * sparc-dis.c (X_DISP19): Define.
4535         (print_insn, case 'G'): Use it.
4536         (print_insn, case 'L'): Sign extend displacement.
4537
4538 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
4539
4540         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4541         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
4542         host_makefile_frag or frags.
4543         * aclocal.m4: New file.
4544         * configure: Rebuild.
4545         * Makefile.in (INSTALL): Set to @INSTALL@.
4546         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4547         (INSTALL_DATA): Set to @INSTALL_DATA@.
4548         (AR): Set to @AR@.
4549         (AR_FLAGS): Set to rc rather than qc.
4550         (CC): Define as @CC@.
4551         (CFLAGS): Set to @CFLAGS@.
4552         (@host_makefile_frag@): Remove.
4553         (config.status): Remove dependency upon @frags@.
4554
4555         * configure.in: ../bfd/config.bfd now just sets shell variables.
4556         Use them rather than looking through target Makefile fragments.
4557         * configure: Rebuild.
4558
4559 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4560
4561         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4562
4563 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
4564
4565         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4566         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4567         sparc64 insns.
4568
4569         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4570         (lookup_{name,value}): New functions.
4571         (prefetch_table): New static local.
4572         (sparc_{encode,decode}_prefetch): New functions.
4573         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4574
4575 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4576
4577         * sh-opc.h: Add blank lines to improve readabililty of sh3e
4578         instructions.
4579
4580 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4581
4582         * sh-dis.c: Correct comment on first line of file.
4583
4584 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
4585
4586         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4587
4588         * sparc-opc.c (asi, membar): New static locals.
4589         (sparc_{encode,decode}_{asi,membar}): New functions.
4590         (sparc_opcodes, membar insn): Fix.
4591         * sparc-dis.c (print_insn): Call sparc_decode_asi.
4592         Support decoding of membar masks.
4593         (X_MEMBAR): Define.
4594
4595 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
4596
4597         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4598
4599 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4600
4601         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4602         and likewise for the other branches.  Add bhs as an alias for bcc,
4603         and likewise for the size variants.  Add dbhs as an alias for
4604         dbcc.
4605
4606 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
4607
4608         * sh-opc.h (FP sts instructions): Update to match reality.
4609
4610 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
4611
4612         * m68k-dis.c: (fpcr_names): Add % before all register names.
4613         (reg_names): Likewise.
4614         (print_insn_arg): Don't explicitly print % before register names.
4615         Add % before register names in static array names.  In case 'r',
4616         print data registers as `@(Dn)', not `Dn@'.  When printing a
4617         memory address, don't print @# before it.
4618         (print_indexed): Change base_disp and outer_disp from int to
4619         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
4620         syntax.  Sign extend 8 byte displacement correctly.
4621         (print_base): Print using MIT syntax.  Print zpc when appropriate.
4622         Change parameter disp from int to bfd_vma.
4623
4624         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4625         for jsr.
4626
4627 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4628
4629         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4630         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4631         * sh-opc.h (sh_arg_type): Add new operand types.
4632         (sh_table): Add new opcodes from SH3E Floating Point ISA.
4633
4634 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4635
4636         * Makefile.in (distclean): Remove generated file config.h.
4637
4638 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4639
4640         * Makefile.in (distclean): Remove generated file config.h.
4641
4642 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
4643
4644         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4645         Clean up tables.
4646         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4647         (opcode): Remove.
4648         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
4649         rather than numopcodes.  Use m68k_opcodes rather than removed
4650         opcode function.  Don't check F_ALIAS.
4651         (print_insn_arg): Change first parameter to be const char *.
4652         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4653         (m68k-opc.o): New target.
4654         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4655         * configure: Rebuild.
4656
4657 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
4658
4659         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4660         (opcode_bits, opcode_hash_table): New variables.
4661         (opcodes_initialized): Renamed from opcodes_sorted.
4662         (build_hash_table): New function.
4663         (is_delayed_branch): Use hash table.
4664         (print_insn): Renamed from print_insn_sparc, made static.
4665         Build and use hash table.  If !sparc64, ignore sparc64 insns,
4666         and vice-versa if sparc64.
4667         (print_insn_sparc, print_insn_sparc64): New functions.
4668         (compare_opcodes): Move sparc64 opcodes to end.
4669         Print commutative insns with constant second.
4670         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4671
4672 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4673
4674         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
4675         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
4676         avoids printing a delay slot in a delay slot.
4677         * sh-opc.h (sh_table): Fully bracket last entry.
4678
4679 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
4680
4681         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4682
4683 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
4684
4685         * configure.in: Get host_makefile_frag from ${srcdir}.
4686
4687         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
4688         config.h from config.in.  Don't set up sysdep.h link.
4689         * sysdep.h: New file.
4690         * configure, config.in: New files, generated from configure.in.
4691         * Makefile.in: Updated to be processed autoconf-style.
4692         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
4693         (Makefile): Depend on config.status.
4694         (config.status): New rule.
4695         * configure.bat: Update Makefile substitutions.
4696
4697 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
4698
4699         * mips-opc.c (L1): Define.
4700         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4701         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4702         and wb.
4703
4704 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4705
4706         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4707         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4708         have multiple add units but only a single logical unit.
4709
4710         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4711         shifted by 18, without any insertion or extraction function.
4712         (insert_cr, extract_cr): Remove.
4713
4714 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4715
4716         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4717         register names.
4718
4719 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
4720
4721         * mpw-config.in: Add sh and i386 configs, remove sparc config.
4722         * sh-opc.h: Add copyright.
4723
4724 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
4725
4726         * Makefile.in (crunch-m68k): Delete extra target accidentally
4727         checked in a while ago.
4728
4729 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4730
4731         * sh-opc.h (sh_table): Add SH3 support.
4732
4733 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
4734
4735         * sh-opc.h: Added bsrf and braf.
4736
4737 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4738
4739         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
4740         bogus [ls]fm{ea,fd} patterns.
4741
4742         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4743         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4744         initialize it from memory.  Make function static.
4745         (print_insn_{big,little}_arm): New functions.
4746         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4747         the correct endianness.
4748
4749 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
4750
4751         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4752         enum list.
4753
4754 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4755
4756         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4757         17th, so that it builds again using GCC as the compiler.
4758
4759 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4760
4761         * mips-dis.c (print_insn_little_mips): Cast return value from
4762         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4763         expects an unsigned long, and that might be fewer words of
4764         argument storage (e.g., if bfd_vma is long long on a 32-bit
4765         machine).
4766         (print_insn_big_mips): Likewise with bfd_getb32 value.
4767         (_print_insn_mips): Now static.
4768
4769 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
4770
4771         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4772         gcc memory hog problem with initializer is fixed.
4773
4774 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
4775
4776         Merge in support for Mac MPW as a host.
4777         (Old change descriptions retained for informational value.)
4778
4779         * mpw-config.in (archname): Compute from the config.
4780         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4781
4782         * mpw-config.in (target_arch): Compute from canonical target.
4783         (m68k, mips, powerpc, sparc): Add architectures.
4784         * mpw-make.in (disassemble.c.o): Add.
4785         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4786
4787         * mpw-config.in (BFD_MACHINES): Set to a default value.
4788         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4789
4790         * mpw-make.in (CSEARCH): Add extra-include to search path.
4791
4792         * mpw-config.in (varargs.h): Don't create.
4793         (sysdep.h): Create using forward-include.
4794         * mpw-make.in (CSEARCH): Add include/mpw to search path.
4795
4796         * mpw-config.in: New file, MPW version of configure.in.
4797         * mpw-make.in: New file, MPW version of Makefile.in.
4798
4799 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4800
4801         * alpha-dis.c (print_insn_alpha): Put empty statement after
4802         default label.
4803
4804 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4805
4806         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4807         (low_sign_extend): Likewise.
4808         (get_field): Delete unused function.
4809         (set_field, deposit_14, deposit_21): Likewise.
4810
4811 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4812
4813         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
4814           (guy@netapp.com).
4815
4816 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
4817
4818         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
4819
4820         * alpha-opc.h (OSF_ASMCODE): define
4821         print pal-code names as defined in App C of the
4822         Alpha Architecture Reference Manual
4823
4824         * alpha-dis.c: cleaned up output
4825         print stylized code forms as defined in App A.4.3 of the
4826         Alpha Architecture Reference Manual
4827
4828 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
4829
4830         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
4831         `rfe'.
4832         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4833         'N', and 'M'.
4834
4835 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4836
4837         * m68k-dis.c (opcode): New function.  Returns address of opcode
4838         table entry given index, even if the opcode table was split to
4839         work around gcc bugs.
4840         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4841         directly.
4842         (BREAK_UP_BIG_DECL): Make secondary array static and const.
4843         (reg_names): Now const.
4844         (print_insn_arg): Arrays cacheFieldName and names now const.
4845         (print_indexed): Array scales now const.
4846
4847 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
4848
4849         * ppc-opc.c: Sort recently added instructions by minor opcode
4850         number within major opcode number.
4851
4852 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
4853
4854         * hppa-dis.c: Include libhppa.h.
4855
4856 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4857
4858         * mips-opc.c: Change dli to use M_DLI, and add dla.
4859
4860 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4861
4862         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
4863
4864 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
4865
4866         * mips-opc.c: Add r4650 mul instruction.
4867
4868 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
4869
4870         * mips-opc.c: Add uld and usd macros for unaligned double load and
4871         store.
4872
4873 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4874
4875         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4876         mfdcr, mtdcr, icbt, iccci.
4877
4878 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
4879
4880         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4881         signed char fields to shorts, more portable.
4882
4883 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
4884
4885         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4886         char fields as signed chars, since they may have negative values.
4887
4888 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4889
4890         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4891           (mycroft@netbsd.org).
4892
4893 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
4894
4895         From "Logg, Ed" <elogg@ea.com>:
4896         * ppc-opc.c (extract_bdm): Correct parenthezisation.
4897         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4898         value.
4899
4900 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
4901
4902         * ppc-opc.c: Changes based on patch from David Edelsohn
4903         <edelsohn@mhpcc.edu>.
4904         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4905         SPR.
4906         (FXM_MASK): Define.
4907         (insert_tbr): New static function.
4908         (extract_tbr): New static function.
4909         (XFXFXM_MASK, XFXM): Define.
4910         (XSPRBAT_MASK, XSPRG_MASK): Define.
4911         (powerpc_opcodes): Add instructions to access special registers by
4912         name.  Add mtcr and mftbu.
4913
4914 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4915
4916         * mips-opc.c (P3): Define.
4917         (mips_opcodes): Add mad and madu.
4918
4919 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
4920
4921         * configure.in: Add W65 support.
4922         * disassemble.c: Likewise.
4923         * w65-opc.h, w65-dis.c: New files.
4924
4925 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4926
4927         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4928         immediates.
4929
4930 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4931
4932         * mips-opc.c: Add dli as a synonym for li.
4933
4934 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4935
4936         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4937         print something for reserved opcode values, even if it won't
4938         assemble again.
4939
4940         * mips-dis.c (_print_insn_mips): When initializing, shift right
4941         and mask, to avoid sign extension problems on the Alpha.
4942
4943         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4944         control registers.
4945
4946 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4947
4948         * sh-opc.h (mov.l gbr): Get direction right.
4949         * sh-dis.c (print_insn_shx): New function.
4950         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4951         print opcodes with right byte order.
4952
4953 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4954
4955         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4956         to avoid conflicts with getopt.
4957
4958 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4959
4960         * hppa-dis.c (print_insn_hppa): Read the instruction using
4961         bfd_getb32, so that it works on a little endian or 64 bit host.
4962         Remove unused local variable op.
4963
4964 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4965
4966         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4967         addu does not work correctly if -mips3.
4968
4969 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4970
4971         * a29k-dis.c (print_special): Add special register names defined
4972         on 29030, 29040 and 29050.
4973         (print_insn): Handle new operand type 'I'.
4974
4975 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4976
4977         * Makefile.in (INSTALL): Use top level install.sh script.
4978
4979 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4980
4981         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4982         that it works on a little endian host.
4983
4984 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4985
4986         * configure.in: Use ${config_shell} when running config.bfd.
4987
4988 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4989
4990         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4991
4992 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4993
4994         * a29k-dis.c (print_insn): Print the opcode.
4995
4996 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4997
4998         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4999
5000 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
5001
5002         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
5003
5004 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
5005
5006         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
5007         which store a value into memory.
5008
5009 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
5010
5011         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
5012         * arm-dis.c, arm-opc.h: New files.
5013
5014 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
5015
5016         * Makefile.in (ns32k-dis.o): Add dependency.
5017         * ns32k-dis.c (print_insn_arg): Declare initialized local as
5018         string, not as array of chars.
5019
5020 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5021
5022         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
5023
5024         * sparc-opc.c: Added sparclite extended FP operations, and
5025         versions of v9 impdep* instructions permitting specification of
5026         the OPF field.
5027
5028 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5029
5030         * i960-dis.c (reg_names): Now const.
5031         (struct sparse_tabent): New type, copied from array type in mem
5032         function.
5033         (ctrl): Local static array ctrl_tab now const.
5034         (cobr): Local static array cobr_tab now const.
5035         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
5036         static variable mem_tab no longer explicitly initialized.  Changed
5037         mem_init to const array of struct sparse_tabent.
5038         (reg): Local static variable reg_tab no longer explicitly
5039         initialized.  Changed reg_init to const array of struct
5040         sparse_tabent.
5041         (ea): Local static array scale_tab now const.
5042
5043         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
5044         (REG_MAX): Updated.
5045
5046 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
5047
5048         * configure.bat: the disassember needs to be enabled for
5049         "objdump -d" to work in djgpp.
5050
5051 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5052
5053         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
5054         (invalid_float): Enabled general version, doesn't require running
5055         on ns32k host.  Changed to take char* argument, and test for
5056         explicitly specified sizes, instead of using sizeof() on host CPU
5057         types.
5058         (INVALID_FLOAT): Cast first argument.
5059         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
5060         list_P032, list_M032): Now const.
5061         (optlist, list_search): Made appropriate arguments now point to
5062         const.
5063         (print_insn_arg): Changed static array of one-character-string
5064         pointers into a static const array of characters; fixed sprintf
5065         statement accordingly.
5066
5067 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
5068
5069         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
5070         from distribution. A ns32k-dis.c from a previous distribution has
5071         been brought up to date and supports the new interface.
5072
5073         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5074
5075         * configure.in: add bfd_ns32k_arch target support.
5076
5077         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5078         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5079
5080 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
5081
5082         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5083         disassembly right.
5084
5085 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
5086
5087         * h8300-dis.c, mips-dis.c: Don't use true and false.
5088
5089 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
5090
5091         * configure.in: Change --with-targets to --enable-targets.
5092
5093 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
5094
5095         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5096         opcodes to the first instruction with that opcode, to speed
5097         disassembly of large files.  From ralphc@pyramid.com (Ralph
5098         Campbell).
5099
5100 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5101
5102         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5103
5104 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
5105
5106         * configure.bat: update to latest makefile.in
5107
5108 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
5109
5110         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5111         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5112         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5113         slot insn is in a delay slot.
5114         * z8k-opc.h: (resflg): Fix patterns.
5115         * h8500-opc.h Fix CR insn patterns.
5116
5117 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5118
5119         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5120         "cmpl" before POWER versions, so that gas -many uses them.
5121
5122 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
5123
5124         * disassemble.c: New file.
5125         * Makefile.in (OFILES): Add disassemble.o.
5126         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5127         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
5128         binutils/configure.in.
5129
5130         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5131         opcode being examined.
5132
5133 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5134
5135         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5136         (insert_ral, insert_ram, insert_ras): New functions.
5137         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5138         RAS for store with update.
5139
5140 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5141
5142         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
5143         (edelsohn@npac.syr.edu).
5144
5145 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5146
5147         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5148         immediate argument.
5149
5150 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
5151
5152         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5153
5154 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5155
5156         * ppc-opc.c (powerpc_operands): The signedp field has been
5157         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
5158         instead.  Add new operand SISIGNOPT.
5159         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5160         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5161         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5162         than signedp field.
5163
5164 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5165
5166         * i386-dis.c (struct private):  Renamed to dis_private. `private'
5167         is a reserved word for dynix cc.
5168
5169 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5170
5171         * configure.in: Change error message to refer to bfd/config.bfd
5172         rather than bfd/configure.in.
5173
5174 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
5175
5176         * ppc-opc.c: Define POWER2 as short alias flag.
5177         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5178         fsqrt.
5179
5180 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5181
5182         * i960-dis.c (print_insn_i960): Don't read a second word for
5183         opcodes 0, 1, 2 and 3.
5184
5185 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5186
5187         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5188
5189 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5190
5191         * m68881-ext.c: Removed; no longer used.
5192         * Makefile.in: Changed accordingly.
5193
5194         * m68k-dis.c (ext_format_68881): Don't declare.
5195         (print_insn_m68k): If an instruction uses place 'i', it uses at
5196         least four fixed bytes.
5197         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
5198         extended float, convert to double using floatformat_to_double, not
5199         ieee_extended_to_double, and fetch the data before converting it.
5200
5201 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5202
5203         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
5204         davidj@ICSI.Berkeley.EDU (David Johnson).
5205
5206 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5207
5208         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5209         PowerPC uses bdnz[l][a].
5210
5211 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5212
5213         * dis-buf.c, i386-dis.c:  Include sysdep.h.
5214
5215 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5216
5217         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5218
5219         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5220         by Motorola PowerPC 601 with PPC_OPCODE_601.
5221         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5222         Disassemble Motorola PowerPC 601 instructions as well as normal
5223         PowerPC instructions.
5224
5225 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
5226
5227         * i960-dis.c (reg, mem): Just use a static array instead of
5228         calling xmalloc.
5229
5230 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
5231
5232         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5233         condition name index if this is for a negated condition.
5234
5235         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5236         Floating point format for 'H' operand is backwards from normal
5237         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
5238         operands (fmpyadd and fmpysub), handle bizarre register
5239         translation correctly for single precision format.
5240
5241         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5242         or 'I' operands if the next format specifier is 'M' (fcmp
5243         condition completer).
5244
5245 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5246
5247         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5248         single number giving a bitmask for the MB and ME fields of an M
5249         form instruction.  Change NB to accept 32, and turn it into 0;
5250         also turn 0 into 32 when disassembling.  Seperated SH from NB.
5251         (insert_mbe, extract_mbe): New functions.
5252         (insert_nb, extract_nb): New functions.
5253         (SC_MASK): Mask out SA and LK bits.
5254         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5255         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
5256         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
5257         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5258         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5259         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
5260         (powerpc_macros): Define table of macro definitions.
5261         (powerpc_num_macros): Define.
5262
5263         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5264         if PPC_OPERAND_NEXT is set.
5265
5266 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5267
5268         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5269         char.  Retrieve contents using bfd_getl32 instead of shifting.
5270
5271 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5272
5273         * ppc-opc.c: New file.  Opcode table for PowerPC, including
5274         opcodes for POWER (RS/6000).
5275         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
5276         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5277         (CFILES): Add ppc-dis.c.
5278         (ppc-dis.o, ppc-opc.o): New targets.
5279         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5280
5281 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
5282
5283         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5284         No space before 'u', 'f', or 'N'.
5285
5286 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
5287
5288         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5289         farther than we should.
5290
5291         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5292
5293 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5294
5295         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5296
5297 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
5298
5299         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5300         needs it, to prevent reading past the end of a section.
5301
5302 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5303
5304         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5305         Removed t,A case for la; always use t,A(b) case.
5306
5307 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5308
5309         From Ted Lemen <mellon@pepper.ncd.com>
5310         * mips-dis.c (print_insn_arg): Handle 'k'.
5311         * mips-opc.c: Make cache use k, not t.
5312
5313 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5314
5315         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
5316         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5317         FLOAT_FORMAT_CODE to put out floating point register names.
5318
5319 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5320
5321         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5322
5323 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5324
5325         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5326
5327 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5328
5329         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5330         larger than 32.  Moved dsxx32 variants first for disassembler.
5331
5332 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5333
5334         * z8kgen.c, z8k-opc.h: Add full lda information.
5335
5336 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
5337
5338         * hppa-dis.c (print_insn_hppa): Do not emit a space after
5339         movb instructions.  Any necessary space will be emitted by
5340         the code to handle nullification completers.
5341
5342 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5343
5344         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5345
5346 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5347
5348         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
5349         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
5350
5351 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5352
5353         * mips-opc.c: Correct lwu opcode value (book had it wrong).
5354
5355 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5356
5357         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5358         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5359
5360 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
5361
5362         * m88k-dis.c (m88kdis): comment change.  Remove space after
5363           printing mnemonic.
5364           (printop): handle new arg types DEC and XREG for m88110.
5365
5366 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
5367
5368         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5369         type for absolute branch addresses.  Delete special
5370         "ble" and "be" code in 'W' operand code.
5371
5372 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5373
5374         * mips-opc.c: Set hazard information correctly for branch
5375         likely instructions.
5376
5377 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5378
5379         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
5380         info->fprintf_func for printing and info->print_address_func for
5381         address output.
5382
5383 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5384
5385         * mips-opc.c: Set INSN_TRAP for tXX instructions.
5386
5387 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5388
5389         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5390         Corrected second case of "b" for disassembler.
5391
5392 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5393
5394         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
5395         to BFD swapping routines to correspond to BFD name changes.
5396
5397 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5398
5399         * mips-opc.c: Change div machine instruction to be z,s,t rather
5400         than s,t.  Change div macro to be d,v,t rather than d,s,t.
5401         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
5402         rem and remu which generates only the corresponding div
5403         instruction.  This is for compatibility with the MIPS assembler,
5404         which only generates the simple machine instruction when an
5405         explicit destination of $0 is used.
5406         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5407
5408 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5409
5410         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5411         WR_31 hazard for bal, bgezal, bltzal.
5412
5413 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5414
5415         * hppa-dis.c (print_insn_hppa): Use print function
5416         from within the disassemble_info, not fprintf_filtered.
5417
5418 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5419
5420         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
5421         Law, law@cs.utah.edu.)
5422
5423 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5424
5425         * mips-opc.c ("absu"): Removed.
5426         ("dabs"): Added.
5427
5428 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5429
5430         * mips-opc.c: Added r6000 and r4000 instructions and macros.
5431         Changed hazard information to distinguish between memory load
5432         delays and coprocessor load delays.
5433
5434 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5435
5436         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
5437
5438 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5439
5440         * configure.in: Don't pass cpu to config.bfd.
5441
5442 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5443
5444         * m88k-dis.c (m88kdis): Make class unsigned.
5445
5446 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
5447
5448         * alpha-dis.c (print_insn_alpha): One branch format case was
5449         missing the instruction name.
5450
5451 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
5452
5453         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5454         Add the arch-specific auxiliary files.
5455         (OFILES): Remove the arch-specific auxiliary files
5456         and use BFD_MACHINES instead of DIS_LIBS.
5457         * configure.in: Set BFD_MACHINES based on --with-targets option.
5458
5459 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5460
5461         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
5462         for swc1.
5463
5464 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5465
5466         * sparc-opc.c: Change CONST to const to deal with gcc
5467         -Dconst=__const -traditional.
5468
5469 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5470
5471         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5472         coprocessor instructions out of #if 0, and made them use new
5473         argument type "C".
5474
5475 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5476
5477         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5478
5479 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
5480
5481         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5482         instruction, for use by the disassembler.
5483
5484         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
5485         hand-coded sign extensions that depended on 32-bit host ints.
5486         FIXME, we still depend on big-endian host bitfield ordering.
5487         (sparc_print_insn):  Set the insn_info_valid field, and the
5488         other fields that describe the instruction being printed.
5489
5490 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
5491
5492         * sparc-opc.c (call): Accept all 6 addressing modes valid for
5493         `jmp' instead of just one of them.
5494
5495 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5496
5497         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5498         (fput_fp_reg_r): Renamed from fput_reg_r.
5499         (fput_fp_reg): New function.
5500         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5501
5502         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5503
5504         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5505
5506 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
5507
5508         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5509
5510         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5511         don't output a space.
5512
5513         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5514
5515 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
5516
5517         * mips-opc.c: New file, containing opcode table from
5518         ../include/opcode/mips.h.
5519         * Makefile.in: Add it.
5520
5521 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5522
5523         * m88k-dis.c: New file, moved in from gdb and changed to use the
5524         new dis-asm.h disassembler interface.
5525         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5526         (m88k-dis.o): New target.
5527
5528 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
5529
5530         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5531         argument string const char * to correspond to opcode/mips.h.
5532
5533 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
5534
5535         * mips-dis.c: Updated to account for name changes in new version
5536         of opcode/mips.h.
5537         * Makefile.in: Added header file dependencies.
5538
5539 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
5540
5541         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5542
5543 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5544
5545         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5546         extend, rather than shifts.
5547
5548 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
5549
5550         * Makefile.in: Undo 15 June change.
5551
5552 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
5553
5554         * m68k-dis.c (print_insn_arg):  Change return value to byte count
5555         or error code.
5556         * m68k-dis.c:  Re-write to detect invalid operands before
5557         printing anything, so we can handle this the same way we
5558         handle invalid opcodes.
5559
5560 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5561
5562         * sh-dis.c, sh-opc.h: Understand some more opcodes.
5563
5564 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
5565
5566         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5567         header files.
5568
5569 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5570
5571         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5572
5573         * configure.in: Do make sysdep.h link.
5574         * Makefile.in: Search ../include.  Don't search ../bfd.
5575
5576 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
5577
5578         Changes from Jeff Law, law@cs.utah.edu:
5579         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
5580         Do not print a space before the completers specified by
5581         'a' and 'd'.
5582
5583 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
5584
5585         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5586         defined, since gdb has been fixed.
5587
5588         Changes from Jeff Law, law@cs.utah.edu:
5589         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5590         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5591         be a *disassemble_info, not a *FILE.
5592         * hppa-dis.c: Support 'd', '!', and 'a'.
5593         * hppa-dis.c: Support 's' to extract a 2 bit space register.
5594         * hppa-dis.c: Delete cases which are no longer needed.
5595
5596 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
5597
5598         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5599
5600 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5601
5602         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5603         H8/300-H opcodes.
5604
5605 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
5606
5607         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5608         * configure.in:  No longer need to configure to get sysdep.h.
5609
5610 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
5611
5612         * Patches from Jeffrey Law <law@cs.utah.edu>.
5613         * hppa-dis.c: Support 'I', 'J', and 'K' in output
5614         templates for 1.1 FP computational instructions.
5615
5616 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5617
5618         * h8500-dis.c (print_insn_h8500): Address argument is type
5619         bfd_vma.
5620         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5621         Ditto.
5622
5623         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5624         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5625
5626         * sparc-dis.c (compare_opcodes): Move static declaration to
5627         top-level.
5628
5629 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5630
5631         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5632         instruction, remove unimp hack from 'l' argument.
5633
5634 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
5635
5636         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
5637         happy.
5638
5639 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
5640
5641         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5642         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5643         instructions.
5644
5645 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5646
5647         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
5648         arrays of string pointers to 2-d arrays of chars, to save
5649         space.
5650
5651 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
5652
5653         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5654         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5655
5656 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5657
5658         * hppa-dis.c: New file from Utah, adapted to new disassembler
5659         calling interface.
5660         * Makefile.in: Include it.
5661
5662 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5663
5664         * sh-dis.c, sh-opc.h: New files.
5665
5666 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5667
5668         * alpha-dis.c, alpha-opc.h: New files.
5669
5670 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5671
5672         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5673         value.
5674
5675 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
5676
5677         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5678
5679 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
5680
5681         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5682         const.
5683
5684 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
5685
5686         * sparc-dis.c: Use fprintf_func a few places where I forgot,
5687         and double percent signs a few places.
5688
5689         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5690
5691         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5692         Use info->print_address_func not print_address.
5693
5694         * dis-buf.c (generic_print_address): New function.
5695
5696 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5697
5698         * Makefile.in: Add sparc-dis.c.
5699         sparc-dis.c: New file, merges binutils and gdb versions as follows:
5700         From GDB:
5701             Add `add' instruction to the set that get checked
5702             for a preceding `sethi' in order to print an absolute address.
5703             * (print_insn):  Disassembly prefers real instructions.
5704             (is_delayed_branch):  Speed up.
5705             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
5706             Still missing some float ops, and needs testing.
5707             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5708             F_ALIAS.  Use printf, not fprintf, when not passing a file
5709             pointer...
5710             (compare_opcodes): Check that identical instructions have
5711             identical opcodes, complain otherwise.
5712         From binutils:
5713             * New 'm' arg.
5714             * Include reg_names.
5715         From neither:
5716             Use dis-asm.h/read_memory_func interface.
5717
5718 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
5719
5720         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5721           deliberately return non-zero to setjmp from longjmp.  Otherwise
5722           this code fails to compile.
5723
5724 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
5725
5726         * m68k-dis.c:  Fix prototype for fetch_arg().
5727
5728 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5729
5730         * dis-buf.c: New file, for new read_memory_func interface.
5731         Makefile.in (OFILES): Include it.
5732         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5733         Use new read_memory_func interface.
5734
5735 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5736
5737         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5738         * h8500-opc.h: Fix couple of opcodes.
5739
5740 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
5741
5742         * Makefile.in: add dvi & installcheck targets
5743
5744 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
5745
5746         * Makefile.in:  Update for h8500-dis.c.
5747
5748 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5749
5750         * h8500-dis.c, h8500-opc.h: New files
5751
5752 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
5753
5754         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
5755         ../include/dis-asm.h.
5756         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
5757         and ../gdb/m68k-pinsn.c).
5758         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
5759         and ../gdb/i386-pinsn.c).
5760         * m68881-ext.c:  New file.  Moved definition of
5761         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5762         * Makefile.in:  Adjust for new files.
5763         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
5764         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
5765         can be dis-assembled.
5766
5767 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5768
5769         * mips-dis.c (print_insn_arg): Now returns void.
5770
5771 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
5772
5773         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
5774         files that use the macros.
5775
5776 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5777
5778         * mips-dis.c: New file, from gdb/mips-pinsn.c.
5779         * Makefile.in (DIS_LIBS): Added mips-dis.o.
5780         (CFILES): Added mips-dis.c.
5781
5782 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5783
5784         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5785         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5786
5787 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
5788
5789         * Makefile.in:  Improve *clean rules.
5790         * configure.in:  Allow a default host.
5791
5792 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5793
5794         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5795         files include other sysdep files
5796
5797 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5798
5799         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5800
5801 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
5802
5803         * configure.in:  For host support, use ../bfd/configure.host
5804         so it stays in sync with the ../bfd/hosts database.
5805
5806 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5807
5808         * configure.in: use cpu-vendor-os triple instead of nested cases
5809
5810 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
5811
5812         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5813         *always* the wrong one.
5814
5815 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5816
5817         * z8kgen.c: added copyright info
5818
5819 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5820
5821         * z8k-dis.c (unparse_instr): prettier tabs
5822         * z8kgen.c -> z8k-opc.h: bug fixes in tables
5823
5824 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
5825
5826         * configure.in:  Add ncr* configuration.
5827         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
5828         picayune ANSI compilers happy.
5829
5830 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
5831
5832         * configure.in (i386):  Make i386 and i486 synonymous for now.
5833         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
5834
5835 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5836
5837         * Makefile.in (install): Fix typo.
5838
5839 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
5840
5841         * Makefile.in (make):  Remove obsolete crud.
5842         (sparc-opc.o):  Avoid Sun Make VPATH bug.
5843
5844 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
5845
5846         * Makefile.in: since there are no SUBDIRS, remove rule and
5847         references of subdir_do.
5848
5849 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5850
5851         * Makefile.in (install): Get the library name right here too.
5852         Don't install bfd.h, since it's unrelated to this library.  No
5853         subdirs to recurse into, either.
5854         (CFILES): The source file has a .c suffix, not .o.
5855
5856         * sparc-opc.c: New file, moved from BFD.
5857         * Makefile.in (OFILES): Build it.
5858
5859 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
5860
5861         * z8k-dis.c: fixed forward refferences of some declarations.
5862
5863 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
5864
5865         * Makefile.in: get the name of the library right
5866
5867 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5868
5869         * z8k-dis.c: knows how to disassemble z8k stuff
5870         * z8k-opc.h: new file full of z8000 opcodes
5871
5872 \f
5873 Local Variables:
5874 version-control: never
5875 End: