1 2000-05-21 Nick Clifton <nickc@cygnus.com>
3 * Makefile.am (LIBIBERTY): Define.
5 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
7 * fr30-desc.h: Partially regenerated to account for changed
8 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
11 2000-05-15 Nick Clifton <nickc@cygnus.com>
13 * arm-opc.h: Use upper case for flasg in MSR and MRS
14 instructions. Allow any bit to be set in the field_mask of
17 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
18 field_mask of an MSR instruction.
20 2000-05-11 Thomas de Lellis <tdel@windriver.com>
22 * arm-opc.c: Disassembly of thumb ldsb/ldsh
23 instructions changed to ldrsb/ldrsh.
25 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
27 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
28 target addresses for 'jal' and 'j'.
30 2000-05-10 Geoff Keating <geoffk@cygnus.com>
32 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
33 also available in common mode when powerpc syntax is being used.
35 2000-05-08 Alan Modra <alan@linuxcare.com.au>
37 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
38 (dummy_print_address): Ditto.
40 2000-05-04 Timothy Wall <twall@cygnus.com>
44 * disassemble.c (disassembler): Add ARCH_tic54x.
45 * configure.in: Added tic54x target.
47 * Makefile.am: Add tic54x dependencies.
50 2000-05-03 J.T. Conklin <jtc@redback.com>
52 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
54 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
55 unit instruction formats.
56 (PPCVEC): New macro, mask for vector instructions.
57 (powerpc_operands): Add table entries for above operand types.
58 (powerpc_opcodes): Add table entries for vector instructions.
60 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
61 (print_insn_little_powerpc): Likewise.
62 (print_insn_powerpc): Prepend 'v' when printing vector registers.
64 Sun Apr 23 17:54:14 2000 Denis Chertykov <denisc@overta.ru>
66 * avr-dis.c (reg_fmul_d): New. Extract destination register from
68 (reg_fmul_r): New. Extract source register from FMUL instruction.
69 (reg_muls_d): New. Extract destination register from MULS instruction.
70 (reg_muls_r): New. Extract source register from MULS instruction.
71 (reg_movw_d): New. Extract destination register from MOVW instruction.
72 (reg_movw_r): New. Extract source register from MOVW instruction.
73 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
74 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
76 Mon Apr 24 15:21:35 2000 Clinton Popetz <cpopetz@cygnus.com>
78 * configure.in: Add bfd_powerpc_64_arch.
79 * disassemble.c (disassembler): Use print_insn_big_powerpc for
82 2000-04-24 Nick Clifton <nickc@cygnus.com>
84 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
87 2000-04-22 Timothy Wall <twall@cygnus.com>
89 * ia64-gen.c (general): Add an ordered table of primary
90 opcode names, as well as priority fields to disassembly data
91 structures to enforce a preferred disassembly format based on the
92 ordering of the opcode tables.
93 (load_insn_classes): Show a useful message if IC tables are missing.
94 (load_depfile): Ditto.
95 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
96 distinguish preferred disassembly.
97 * ia64-opc-f.c: Reorder some insn for preferred disassembly
98 format. Fix incorrect flag on fma.s/fma.s.s0.
99 * ia64-opc.c: Scan *all* disassembly matches and use the one with
100 the highest priority.
101 * ia64-opc-b.c: Use more abbreviations.
102 * ia64-asmtab.c: Regenerate.
104 Fri Apr 21 16:03:39 2000 Jason Eckhardt <jle@cygnus.com>
106 * hppa-dis.c (extract_16): New function.
107 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
108 new operand types l,y,&,fe,fE,fx.
110 Fri Apr 21 13:20:53 2000 Richard Henderson <rth@cygnus.com>
111 David Mosberger <davidm@hpl.hp.com>
112 Timothy Wall <twall@cygnus.com>
113 Bob Manson <manson@charmed.cygnus.com>
114 Jim Wilson <wilson@cygnus.com>
116 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
117 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
118 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
120 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
121 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
122 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
123 * Makefile.in: Rebuild.
125 * configure.in (bfd_ia64_arch): New target.
126 * disassemble.c (ARCH_ia64): Define.
127 (disassembler): Support ARCH_ia64.
128 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
129 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
130 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
131 ia64-war.tbl, ia64-waw.tbl): New files.
133 2000-04-20 Alexandre Oliva <aoliva@cygnus.com>
135 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
136 (disassemble): Use them.
138 2000-04-14 Alan Modra <alan@linuxcare.com.au>
140 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
141 * Makefile.am: Update dependencies.
142 * Makefile.in: Regenerate.
144 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
146 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
147 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
148 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
149 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
150 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
151 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
152 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
153 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
154 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
155 ansidecl.h as sysdep.h includes it.
157 Fri Apr 7 15:56:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
159 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
160 --enable-build-warnings option.
161 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
162 * Makefile.in, configure: Re-generate.
164 Wed Apr 5 22:28:18 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
166 * sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
167 stc GBR,@-<REG_N> is available for arch_sh1_up.
168 Group parallel processing insn with identical mnemonics together.
169 Make three-operand psha / pshl come first.
171 Wed Apr 5 22:05:40 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
173 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
174 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
175 (sh_arg_type): Add A_PC.
176 (sh_table): Update entries using immediates. Add repeat.
177 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
178 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
180 2000-04-04 Alan Modra <alan@linuxcare.com.au>
182 * po/opcodes.pot: Regenerate.
184 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
185 (DEP): Quote when passing vars to sub-make. Add warning message
187 (DEP1): Rewrite for "gcc -MM".
188 (CLEANFILES): Add DEP2.
190 * Makefile.in: Regenerate.
192 2000-04-03 Denis Chertykov <denisc@overta.ru>
194 * avr-dis.c: Syntax cleanup.
195 (add0fff): Print the pc relative address as a signed number.
198 2000-04-01 Ian Lance Taylor <ian@zembu.com>
200 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
201 the parameter ATTRIBUTE_UNUSED.
202 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
204 2000-04-01 Alexandre Oliva <aoliva@cygnus.com>
206 * m10300-opc.c: SP-based offsets are always unsigned.
208 2000-03-29 Thomas de Lellis <tdel@windriver.com>
210 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
211 [branch always] instead of "undefined".
213 2000-03-27 Nick Clifton <nickc@cygnus.com>
215 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
216 short instructions, from end of list of long instructions.
218 2000-03-27 Ian Lance Taylor <ian@zembu.com>
220 * Makefile.am (CFILES): Add avr-dis.c.
221 (ALL_MACHINES): Add avr-dis.lo.
223 2000-03-27 Alan Modra <alan@linuxcare.com>
225 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
227 (print_insn_avr): Call function via pointer in K&R compatible way.
228 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
229 add0fff, add03f8): Convert to old style function declaration and
231 (avrdis_opcode): Add prototype.
233 2000-03-27 Denis Chertykov <denisc@overta.ru>
235 * avr-dis.c: New file. AVR disassembler.
236 * configure.in (bfd_avr_arch): New architecture support.
237 * disassemble.c: Likewise.
238 * configure: Regenerate.
240 Mon Mar 6 19:52:05 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
242 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
244 2000-03-02 J"orn Rennecke <amylaar@cygnus.co.uk>
246 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
247 flag to determine if operand is pc-relative.
250 (REL6S3): Renamed from IMM6S3.
251 Added flag OPERAND_PCREL.
252 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
253 added flag OPERAND_PCREL.
254 (IMM12S3U): Replaced with REL12S3.
255 (SHORT_D2, LONG_D): Delay target is pc-relative.
256 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
257 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
258 using the REL* operands.
259 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
260 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
261 LONG_Db, using REL* operands.
262 (SHORT_U, SHORT_A5S): Removed stray alternatives.
263 (d30v_opcode_table): Use new *r formats.
265 2000-02-28 Nick Clifton <nickc@cygnus.com>
267 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
268 'signed_overflow_ok_p'.
270 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
272 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
273 name of the libtool directory.
274 * Makefile.in: Rebuild.
276 2000-02-24 Nick Clifton <nickc@cygnus.com>
278 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
279 (cgen_clear_signed_overflow_ok): New function.
280 (cgen_signed_overflow_ok_p): New function.
282 2000-02-23 Andrew Haley <aph@cygnus.com>
284 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
285 m32r-ibld.c,m32r-opc.h: Rebuild.
287 2000-02-23 Linas Vepstas <linas@linas.org>
289 * i370-dis.c, i370-opc.c: New.
291 * disassemble.c (ARCH_i370): Define.
292 (disassembler): Handle it.
294 * Makefile.am: Add support for Linux/IBM 370.
295 * configure.in: Likewise.
297 * Makefile.in: Regenerate.
298 * configure: Likewise.
300 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
302 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
303 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
306 1999-12-30 Andrew Haley <aph@cygnus.com>
308 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
310 * mips-opc.c (G6): New define.
311 (mips_builtin_op): Add "move" definition for -gp32.
313 2000-02-22 Ian Lance Taylor <ian@zembu.com>
315 From Grant Erickson <gerickso@Brocade.COM>:
316 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
318 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
320 * dis-buf.c (buffer_read_memory): Change `length' param and all int
323 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
325 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
326 (print_insn_ppi): Likewise.
327 (print_insn_shx): Use info->mach to select appropriate insn set.
328 Add support for sh-dsp. Remove FD_REG_N support.
329 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
330 (sh_arg_type): Likewise. Remove FD_REG_N.
331 (sh_dsp_reg_nums): New enum.
332 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
333 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
334 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
335 (arch_sh3_dsp_up): Likewise.
336 (sh_opcode_info): New field: arch.
337 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
338 D_REG_N. Fill in arch field. Add sh-dsp insns.
340 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
342 * arm-dis.c: Change flavor name from atpcs-special to
343 special-atpcs to prevent name conflict in gdb.
344 (get_arm_regname_num_options, set_arm_regname_option,
345 get_arm_regnames): New functions. API to access the several
346 flavor of register names. Note: Used by gdb.
347 (print_insn_thumb): Use the register name entry from the currently
348 selected flavor for LR and PC.
350 2000-02-10 Nick Clifton <nickc@cygnus.com>
352 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
354 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
355 "mulsh.h" instructions.
356 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
358 (print_insn_mcore): Add support for little endian targets.
359 Add support for MULSH and OPSR classes.
361 2000-02-07 Nick Clifton <nickc@cygnus.com>
363 * arm-dis.c (parse_arm_diassembler_option): Rename again.
364 Previous delat did not take.
366 2000-02-03 Timothy Wall <twall@redhat.com>
368 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
369 to adjust target address bounds checking and calculate the
370 appropriate octet offset into data.
372 2000-01-27 Nick Clifton <nickc@redhat.com>
374 * arm-dis.c: (parse_disassembler_option): Rename to
375 parse_arm_disassembler_option and allow to be exported.
377 * disassemble.c (disassembler_usage): New function: Print out any
378 target specific disassembler options.
379 Call arm_disassembler_options() if the ARM architecture is being
382 * arm-dis.c (NUM_ELEM): Define this macro if not already
384 (arm_regname): New struct type for ARM register names.
385 (arm_toggle_regnames): Delete.
386 (parse_disassembler_option): Use register name structure.
387 (print_insn): New function: Combines duplicate code found in
388 print_insn_big_arm and print_insn_little_arm.
389 (print_insn_big_arm): Call print_insn.
390 (print_insn_little_arm): Call print_insn.
391 (print_arm_disassembler_options): Display list of supported,
392 ARM specific disassembler options.
394 2000-01-27 Thomas de Lellis <tdel@windriver.com>
396 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
397 ARM_STT_16BIT flag as Thumb code symbols.
399 * arm-dis.c (printf_insn_little_arm): Ditto.
401 2000-01-25 Thomas de Lellis <tdel@windriver.com>
403 * arm-dis.c (printf_insn_thumb): Prevent double dumping
404 of raw thumb instructions.
406 2000-01-20 Nick Clifton <nickc@cygnus.com>
408 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
410 2000-01-03 Nick Clifton <nickc@cygnus.com>
412 * arm-dis.c (streq): New macro.
414 (force_thumb): ew local variable.
415 (parse_disassembler_option): New function: Parse a single, ARM
416 specific disassembler command line switch.
417 (parse_disassembler_option): Call parse_disassembler_option to
418 parse individual command line switches.
419 (print_insn_big_arm): Check force_thumb.
420 (print_insn_little_arm): Check force_thumb.
422 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
424 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
426 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
428 * m10300-opc.c, m10300-dis.c: Add am33 support.
430 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
432 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
433 (print_insn_hppa): Handle 'B' operand.
435 1999-11-22 Nick Clifton <nickc@cygnus.com>
437 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
439 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
441 * mips-opc.c (I5): New.
442 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
443 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
444 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
446 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
448 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
449 * arm-opc.h (print_insn_arm): Added comment documenting
450 the 'X' format just added to arm-dis.c.
452 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
454 * mips-opc.c (la): Create a version that just uses addiu directly.
455 (dla): Expand to daddiu if possible.
457 1999-11-11 Nick Clifton <nickc@cygnus.com>
459 * mips-opc.c: Add ssnop pattern.
461 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
463 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
465 1999-10-29 Nick Clifton <nickc@cygnus.com>
467 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
468 (d30v_format_tab): Define the SHORT_AR format.
470 1999-10-28 Nick Clifton <nickc@cygnus.com>
472 * mcore-dis.c: Remove spurious code introduced in previous delta.
474 1999-10-27 Scott Bambrough <scottb@netwinder.org>
476 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
478 1999-10-18 Michael Meissner <meissner@cygnus.com>
480 * alpha-opc.c (alpha_operands): Fill in missing initializer.
481 (alpha_num_operands): Convert to unsigned.
482 (alpha_num_opcodes): Ditto.
483 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
488 (extract_bdisp): Ditto.
489 (extract_jhint): Ditto.
490 (extract_ev6hwjhint): Ditto.
492 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
494 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
497 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
499 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
501 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
503 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
504 rac/rachi instructions.
505 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
508 1999-10-04 Doug Evans <devans@casey.cygnus.com>
510 * fr30-asm.c,fr30-desc.h: Rebuild.
511 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
512 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
514 1999-09-29 Nick Clifton <nickc@cygnus.com>
516 * sh-opc.h: Fix bit patterns for several load and store
519 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
521 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
522 cleaner code using completer prefixes. Add 'Y'.
524 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
526 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
528 * hppa-dis.c (extract_22): New function.
530 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
532 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
534 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
536 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
538 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
540 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
542 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
544 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
546 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
548 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
550 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
552 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
555 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
557 * hppa-dis.c: (print_insn_hppa): Add missing break after
560 * hppa-dis.c: Finish constifying various completers, register
563 1999-09-14 Michael Meissner <meissner@cygnus.com>
565 * configure.in (Canonicalization of target names): Remove adding
566 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
567 generates $ac_config_sub with a ${CONFIG_SHELL} already.
568 * configure: Regenerate.
570 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
572 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
574 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
576 1999-09-07 Nick Clifton <nickc@cygnus.com>
578 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
579 names for the mulu and muls patterns.
581 1999-09-04 Steve Chamberlain <sac@pobox.com>
583 * pj-opc.c: New file.
584 * pj-dis.c: New file.
585 * disassemble.c (disassembler): Handle bfd_arch_pj.
586 * configure.in: Handle bfd_pj_arch.
587 * Makefile.am: Rebuild dependencies.
588 (CFILES): Add pj-dis.c and pj-opc.c.
589 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
590 * configure, Makefile.in: Rebuild.
592 1999-09-04 H.J. Lu <hjl@gnu.org>
594 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
596 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
598 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
600 1999-08-04 Doug Evans <devans@casey.cygnus.com>
602 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
603 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
604 * m32r-opinst.c: Rebuild.
606 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
608 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
609 register args by 'f'.
611 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
613 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
614 extract_10U_store): New.
615 (print_insn_hppa): Add new completers.
617 * hppa-dis.c (signed_unsigned_names,mix_half_names,
618 saturation_names): New.
619 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
621 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
623 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
625 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
626 to decide to print a space.
628 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
630 * i386-dis.c: Add AMD athlon instruction support.
632 1999-08-10 Ian Lance Taylor <ian@zembu.com>
634 From Wally Iimura <iimura@microunity.com>:
635 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
636 overflow at end of address space.
637 (generic_print_address): Use sprintf_vma.
639 1999-08-08 Ian Lance Taylor <ian@zembu.com>
641 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
642 MKDEP. Rebuild dependencies.
643 * Makefile.in: Rebuild.
645 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
647 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
648 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
649 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
650 (print_insn_hppa): Add 64 bit condition completers.
652 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
654 * hppa-dis.c (print_insn_hppa): Change condition args to use
657 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
659 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
662 1999-07-21 Ian Lance Taylor <ian@zembu.com>
665 * configure.bat: Remove; obsolete.
667 1999-07-11 Ian Lance Taylor <ian@zembu.com>
669 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
670 (generic_strcat_address): Add cast to avoid warning.
671 * i386-dis.c: Initialize all structure fields to avoid warnings.
672 Add ATTRIBUTE_UNUSED as appropriate.
674 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
676 * sparc-dis.c (print_insn_sparc): Differentiate between
677 addition and oring when guessing symbol for comment.
679 1999-07-05 Nick Clifton <nickc@cygnus.com>
681 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
684 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
686 * i386-dis.c: Mention intel mode specials in macro char comment.
688 1999-06-21 Ian Lance Taylor <ian@zembu.com>
690 * alpha-dis.c: Don't include <stdlib.h>.
691 * arm-dis.c: Include "sysdep.h".
692 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
694 * Makefile.am: Rebuild dependencies.
695 * Makefile.in: Rebuild.
697 1999-06-16 Nick Clifton <nickc@cygnus.com>
699 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
702 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
704 * arm-dis.c (arm_regnames): Turn into a pointer to a register
706 (arm_regnames_standard): New variable: Array of ARM register
707 names according to ARM instruction set nomenclature.
708 (arm_regnames_apcs): New variable: Array of ARM register names
709 according to ARM Procedure Call Standard.
710 (arm_regnames_raw): New variable: Array of ARM register names
711 using just 'r' and the register number.
712 (arm_toggle_regnames): New function: Toggle the chosen register set
714 (parse_disassembler_options): New function: Parse any target
715 disassembler command line options.
716 (print_insn_big_arm): Call parse_disassembler_options if any
718 (print_insn_little_arm): Call parse_disassembler_options if any
721 1999-06-13 Ian Lance Taylor <ian@zembu.com>
723 * i386-dis.c (FWAIT_OPCODE): Define.
724 (used_prefixes): New static variable.
725 (fetch_data): Don't print an error message if we have already
726 fetched some bytes successfully.
727 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
728 (prefix_name): New static function.
729 (print_insn_i386): If setjmp fails, indicating a data error, but
730 we have managed to fetch some bytes, print the first one as a
731 prefix or a .byte pseudo-op. If fwait is followed by a non
732 floating point instruction, print the first prefix. Set
733 used_prefixes when prefixes are used. If any prefixes were not
734 used after disassembling the instruction, print the first prefix
735 instead of printing the instruction.
736 (putop): Set used_prefixes when prefixes are used.
737 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
738 (OP_DIR, OP_SIMD_Suffix): Likewise.
740 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
742 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
743 Support signx %reg, clruw %reg.
745 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
747 * sparc-opc.c: Add aliases Solaris as supports.
749 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
751 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
752 * Makefile.in: Regenerated.
754 1999-06-03 Philip Blundell <philb@gnu.org>
756 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
757 when target is PC-relative.
759 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
761 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
764 * m68k-dis.c (fetch_arg): Add places `n', `o'.
766 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
767 Add mcf5206e to appropriate instructions.
768 Add alias for MAC, MSAC.
770 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
773 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
774 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
776 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
778 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
780 * i386-dis.c (Ed): Define.
781 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
783 (OP_rm): Rename to OP_Rd.
786 (putop): Add const to template and p.
787 (print_insn_x86): Delete.
788 (print_insn_i386): Merge old function print_insn_x86. Add const
790 (struct dis386): Add const to name.
791 (dis386_att, dis386_intel): Add const.
792 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
793 (names32, names16, names8, names_seg, index16): Add const.
794 (grps, prefix_user_table, float_reg): Add const.
795 (float_mem_att, float_mem_intel): Add const.
796 (oappend): Add const to s.
797 (OP_REG): Add const to s.
798 (ptr_reg): Add const to s.
799 (dofloat): Add const to dp.
800 (OP_C): Don't skip modrm, it's now done in OP_Rd.
803 (OP_Rd): Check for valid mod. Call Op_E to print.
804 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
805 (OP_MS): Check for valid mod. Call Op_EM to print.
806 (OP_3DNowSuffix): Set obufp and use oappend rather than
807 strcat. Call BadOp() for errors.
808 (OP_SIMD_Suffix): Likewise.
809 (BadOp): New function.
811 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
813 * i386-dis.c (dis386_intel): Remove macro chars, except for
814 jEcxz. Change cWtR and cRtd to cW and cR.
815 (dis386_twobyte_intel): Remove macro chars here too.
816 (putop): Handle R and W macros for intel mode.
818 * i386-dis.c (SIMD_Fixup): New function.
819 (dis386_twobyte_att): Use it on movlps and movhps, and change
820 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
821 (dis386_twobyte_intel): Same here.
823 * i386-dis.c (Av): Remove.
827 (OP_SIMD_Suffix): New function.
828 (OP_DIR): Remove dead code.
829 (eAX_reg..eDI_reg): Renumber.
830 (onebyte_has_modrm): Table numbering comments.
831 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
832 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
833 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
834 and handle SIMD cmp insns in OP_SIMD_Suffix.
835 (info->bytes_per_line): Bump from 5 to 6.
837 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
838 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
840 PIII SIMD support from Doug Ledford <dledford@redhat.com>
841 * i386-dis.c (XM, EX, None): Define.
842 (OP_XMM, OP_EX, OP_None): New functions.
843 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
844 (GRP14): Rename to GRPAMD.
845 (GRP*): Add USE_GROUPS flag.
847 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
848 (twobyte_has_modrm): Add SIMD entries.
849 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
850 (grps): Add SIMD insns.
851 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
852 oappend repz if uses_f3_prefix. Add code to handle new groups for
855 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
856 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
857 operand from Av to Jv.
859 1999-05-07 Nick Clifton <nickc@cygnus.com>
861 * mcore-dis.c (print_insn_mcore): Use .short to display
862 unidentified instructions, not .word.
864 1999-04-26 Tom Tromey <tromey@cygnus.com>
866 * aclocal.m4, configure: Updated for new version of libtool.
868 1999-04-14 Doug Evans <devans@casey.cygnus.com>
870 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
871 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
873 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
875 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
878 1999-04-10 Doug Evans <devans@casey.cygnus.com>
880 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
881 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
883 1999-04-06 Ian Lance Taylor <ian@zembu.com>
885 * opintl.h (LC_MESSAGES): Never define.
887 1999-04-04 Ian Lance Taylor <ian@zembu.com>
889 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
890 (separator_char, scale_char): Likewise.
891 (print_insn_x86): Likewise.
892 (print_insn_i386): Likewise. Add declaration.
894 1999-03-26 Doug Evans <devans@casey.cygnus.com>
896 * fr30-dis.c: Rebuild.
897 * m32r-dis.c: Rebuild.
899 1999-03-23 Ian Lance Taylor <ian@zembu.com>
901 * m68k-opc.c: Change compare instructions to use "@s" rather than
902 ";s" when used with an immediate operand.
904 1999-03-22 Doug Evans <devans@casey.cygnus.com>
906 * cgen-opc.c (cgen_set_cpu): Delete.
907 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
908 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
910 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
912 * po/opcodes.pot: Rebuild.
914 1999-03-16 Martin Hunt <hunt@cygnus.com>
916 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
918 1999-03-11 Doug Evans <devans@casey.cygnus.com>
920 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
921 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
922 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
923 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
924 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
925 * m32r-opinst.c: Rebuild.
927 1999-02-25 Doug Evans <devans@casey.cygnus.com>
929 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
930 (cgen_hw_lookup_by_num): Rewrite.
931 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
932 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
933 * m32r-opinst.c: Rebuild.
935 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
937 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
938 (insert_jhint): Fix insertion mask.
939 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
941 1999-02-10 Doug Evans <devans@casey.cygnus.com>
943 * Makefile.in: Rebuild.
945 1999-02-09 Doug Evans <devans@casey.cygnus.com>
947 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
948 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
949 * Makefile.am: Remove references to them.
950 (HFILES): Add fr30-desc.h,m32r-desc.h.
951 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
953 (ALL_MACHINES): Update.
954 * configure.in: Redo handling of cgen_files.
955 (bfd_i960_arch): Delete i960c-*.lo files.
956 * configure: Regenerate.
957 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
958 (hash_insn_array): Rewrite.
959 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
960 (hash_insn_array): Rewrite.
961 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
962 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
963 (cgen_lookup_get_insn_operands): Ditto.
964 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
965 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
966 * po/POTFILES.in: Rebuild.
967 * po/opcodes.pot: Rebuild.
969 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
971 * Makefile.am: Rebuild dependencies.
972 (HFILES): Add fr30-opc.h.
973 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
974 * Makefile.in: Rebuild.
976 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
977 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
979 * acconfig.h: Remove.
980 * configure: Rebuild with current autoconf/automake.
981 * aclocal.m4: Likewise.
982 * config.in: Likewise.
983 * Makefile.in: Likewise.
985 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
987 * m68k-opc.c: Correct move (not movew) to status word on 5200.
989 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
991 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
992 * i386-dis.c (x_mode): Define.
996 (dis386_twobyte): Remove.
997 (dis386_twobyte_att): New.
998 (dis386_twobyte_intel): New.
999 (print_insn_x86): Use new arrays.
1000 (float_mem): Remove.
1001 (float_mem_intel): New.
1002 (float_mem_att): New.
1003 (dofloat): Use new float_mem arrays.
1004 (print_insn_i386_att): New.
1005 (print_insn_i386_intel): New.
1006 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
1007 (putop): Handle intel syntax.
1008 (OP_indirE): Handle intel syntax.
1009 (OP_E): Handle intel syntax.
1010 (OP_I): Handle intel syntax.
1011 (OP_sI): Handle intel syntax.
1012 (OP_OFF): Handle intel syntax.
1016 1999-01-27 Doug Evans <devans@casey.cygnus.com>
1018 * fr30-opc.h,fr30-opc.c: Rebuild.
1019 * i960c-opc.h,i960c-opc.c: Rebuild.
1020 * m32r-opc.c: Rebuild.
1022 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
1024 * hppa-dis.c: revert HP merge changes until HP gives us
1027 1999-01-19 Nick Clifton <nickc@cygnus.com>
1029 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
1030 offsets as well as symbloic address.
1032 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
1034 * hppa-dis.c: fix comments and some indentation.
1036 1999-01-12 Doug Evans <devans@casey.cygnus.com>
1038 * fr30-opc.c,i960c-opc.c: Regenerate.
1040 1999-01-11 Doug Evans <devans@casey.cygnus.com>
1042 * fr30-opc.c: Regenerate.
1044 1999-01-06 Doug Evans <devans@casey.cygnus.com>
1046 * m32r-dis.c: Regenerate.
1048 1999-01-05 Doug Evans <devans@casey.cygnus.com>
1050 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
1051 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
1052 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1054 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1056 * configure.in: Require autoconf 2.12.1 or higher.
1058 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
1060 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
1062 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
1064 * fr30-opc.c: Regenerated.
1066 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
1068 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
1070 1998-12-15 Dave Brolley <brolley@cygnus.com>
1072 * fr30-opc.c,fr30-opc.h: Regenerated.
1074 1998-12-14 Dave Brolley <brolley@cygnus.com>
1076 * fr30-opc.c,fr30-opc.h: Regenerated.
1078 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
1080 * fr30-opc.c,fr30-opc.h: Regenerated.
1082 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
1084 * m32r-opc.c: Regenerate.
1086 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
1088 * dis-buf.c (generic_strcat_address): reformat to GNU coding
1089 conventions. change sprintf call to an sprintf_vma call.
1091 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
1093 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1095 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
1097 The following changes were made by
1098 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
1099 David Taylor <taylor@texas.cygnus.com>, and
1100 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
1101 merge in changes by HP; HP did not create ChangeLog entries.
1103 * dis-buf.c (generic_strcat_address): new function.
1105 * hppa-dis.c: Changes to improve hppa disassembly.
1106 Changed formatting in : reg_names, fp_reg_names,control_reg,
1107 New variables : sign_extension_names, deposit_names, conversion_names
1108 float_test_names, compare_cond_names_double, add_cond_names_double,
1109 logical_cond_names_double, unit_cond_names_double,
1110 branch_push_pop_names, saturation_names, shift_names, mix_names,
1111 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
1112 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
1113 (fput_const): renamed as fput_hex_const
1115 - use the macros fputs_filtered and
1116 fput_decimal_const whenever possible; calls to sign_extend require
1117 2 params -- add a missing second param of 0.
1118 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
1119 architecture version number of current machine. HP folks are
1120 trying to handle situation where the target program was compiled
1121 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
1123 - added new cases : 'g', 'B', 'm'
1124 - added cases specifically for PA 2.0
1125 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
1126 - calls to fput_const become calls to fput_hex_const
1128 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
1130 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
1131 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
1132 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
1133 * Makefile.in: Rebuilt.
1134 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
1136 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
1137 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
1139 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
1141 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1143 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
1145 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
1147 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
1148 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
1150 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
1152 * fr30-opc.c: Regenerate.
1154 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
1156 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1158 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
1160 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1162 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
1164 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
1166 1998-11-30 Doug Evans <devans@casey.cygnus.com>
1168 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
1169 CGEN_INSN_BASE_VALUE.
1170 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1171 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
1173 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
1175 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
1177 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
1179 * fr30-asm.c,fr30-dis.c: Regenerated.
1181 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
1183 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
1185 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
1187 * fr30-opc.c: Regenerated.
1189 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
1191 * fr30-opc.c: Regenerated.
1192 * fr30-opc.h: Regenerated.
1193 * fr30-dis.c: Regenerated.
1194 * fr30-asm.c: Regenerated.
1196 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
1198 * mips-opc.c (sync.p,sync.l): Swap insn values.
1200 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
1202 * fr30-opc.c: Regenerate.
1204 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
1206 * fr30-opc.c: Regenerated.
1207 * fr30-opc.h: Regenerated.
1209 1998-11-18 Doug Evans <devans@casey.cygnus.com>
1211 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
1212 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
1214 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
1216 * fr30-opc.c: Regenerated.
1218 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
1220 * fr30-opc.c: Regenerated.
1221 * fr30-opc.h: Regenerated.
1222 * fr30-dis.c: Regenerated.
1223 * fr30-asm.c: Regenerated.
1225 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
1227 * po/opcodes.pot: Regenerated.
1228 * fr30-opc.c: Regenerated.
1229 * fr30-opc.h: Regenerated.
1230 * fr30-dis.c: Regenerated.
1231 * fr30-asm.c: Regenerated.
1233 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
1235 * disassemble.c (disassembler): Add support for FR30 target.
1237 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
1239 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
1240 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
1242 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
1244 * po/opcodes.pot: Regenerate.
1245 * po/POTFILES.in: Regenerate.
1246 * fr30-opc.c: Regenerate.
1247 * fr30-opc.h: Regenerate.
1249 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
1251 * m32r-asm.c: Regenerate.
1253 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
1255 * configure.in: Added case for bfd_fr30_arch.
1256 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
1257 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
1258 (CLEANFILES): Added stamp-fr30.
1260 * fr30-asm.c: New file.
1261 * fr30-dis.c: New file.
1262 * fr30-opc.c: New file.
1263 * fr30-opc.h: New file.
1264 * po/POTFILES.in: Regenerated
1265 * po/opcodes.pot: Regenerated
1267 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
1269 * configure.in: detect cygwin* instead of cygwin32*
1270 * configure: regenerate
1272 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
1274 * mips-opc.c (IS_M): Added.
1276 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
1278 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1280 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
1282 * m32r-opc.h,m32r-opc.c: Regenerate.
1284 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1286 * i386-dis.c (OP_3DNowSuffix): New static function.
1289 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1290 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1291 (insn_codep): New static variable.
1292 (print_insn_x86): Init insn_codep after prefixes.
1293 (grps): Add GRP14 entries for prefetch, prefetchw.
1296 From Jeff B Epler <jepler@usgs.gov>
1297 * i386-dis.c (Suffix3DNow): New table.
1299 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1301 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1303 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1305 * d10v-dis.c (print_operand): If num is nonzero, then
1306 add OPERAND_ACC1, not OPERAND_ACC0.
1308 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1310 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1313 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1315 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1318 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1320 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1322 1998-09-09 Michael Meissner <meissner@cygnus.com>
1324 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1327 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1329 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1331 (print_insn_little_arm): Detect Thumb symbols in elf object
1334 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1336 * alpha-dis.c (print_insn_alpha): Use the machine type to
1337 decide which PALcode set to include.
1339 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1341 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1343 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1345 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1346 MSUB and MSUBS instructions.
1348 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1350 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1351 operand name macros.
1353 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1355 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1356 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1357 +, -, and d for ColdFire.
1359 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1360 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1361 (extract_mbe): Likewise.
1363 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1365 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1367 * m10300-opc.c: First cut at UDF instructions.
1369 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1371 * m32r-opc.c: Regenerate (remove semantic descriptions).
1373 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1375 * arm-dis.c (print_insn_big_arm): Fix indentation.
1376 (print_insn_little_arm): Likewise.
1378 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1380 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1382 (print_insn_little_arm): Likewise.
1384 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1386 Move all global state data into opcode table struct, and treat
1387 opcode table as something that is "opened/closed".
1388 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1389 (cgen_asm_init): Delete.
1390 (cgen_set_parse_operand_fn): New function.
1391 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1392 (cgen_dis_init): Delete.
1393 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1394 (cgen_current_{opcode_table_mach,endian}): Delete.
1395 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1397 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1399 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1402 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1404 * m10300-opc.c: Add entries for "no_match_operands" field in
1407 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1409 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1411 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1413 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1415 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1417 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1419 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1421 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1422 will be masked later.
1424 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1426 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1428 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1430 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1432 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1434 * m10300-dis.c: Only recognize instructions from the currently
1436 * m10300-opc.c: Add field indicating the particular variant of
1437 the mn10300 each instruction is available on.
1439 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1441 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1442 * Makefile.am: Rebuild dependencies.
1443 (CFILES): Add vax-dis.c.
1444 (ALL_MACHINES): Add vax-dis.lo.
1445 * aclocal.m4: Rebuild with current libtool.
1446 * configure, Makefile.in: Rebuild.
1448 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1450 * vax-dis.c: New file, from work by Pauline Middelink
1451 <middelin@polyware.iaf.nl>.
1452 * disassemble.c (ARCH_vax): Define if ARCH_all.
1453 (disassembler): Add case for ARCH_vax.
1454 * makefile.vms: Support compilation on vms/vax.
1456 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1458 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1459 related to sign extension and the size of ints.
1461 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1463 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1464 instructions. Support (sp) addressing mode by expanding it into
1467 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1469 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1471 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1473 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1475 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1477 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1480 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1482 * mips-dis.c (print_insn_little_mips): Previously, instruction
1483 printing references the symbol table to determine whether the
1484 instruction resides in a block regular instructions or mips16
1485 instructions. However, when the disassembler gets used in other
1486 environments where the symbol table is not present, we no longer
1487 rely in the symbol table, rather, use the low bit of the
1488 instructions address to guess. There should be no change for usage
1489 of the disassembler in host based programs, gdb, objdump.
1490 (print_insn_big_mips): ditto.
1491 (print_insn_mips): ditto
1493 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1495 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1497 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1499 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1501 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1503 * i386-dis.c (index16): Add '%' to register names. Use ','
1506 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1508 * i386-dis.c: Don't print opcode suffix when we can figure out the
1509 size (and gas can!) by register operands, or from the default
1511 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1513 (dis386, dis386_twobyte, grps): Use new suffix macros.
1514 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1515 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1516 order of cmps operands to agree with Intel docs. Correct operand
1517 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1518 agree with Intel docs.
1519 (print_insn_x86): Print orphan fwait before other prefixes.
1520 Return correct byte count for orphan fwait with prefixes. Don't
1521 print `bound' operands in reverse order.
1522 (ckprefix): Stop accumulating prefixes if we get fwait.
1523 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1525 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1527 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1528 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1530 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1532 Fix problems when bfd_vma is wider than long.
1533 * i386-dis.c: Make op_address and start_pc unsigned.
1534 (set_op): Make parameter unsigned.
1535 (print_insn_x86): Cast to bfd_vma when passing a value to
1537 * ns32k-dis.c (CORE_ADDR): Don't define.
1538 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1539 bfd_scan_vma to read back address.
1540 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1542 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1543 (NEXTULONG): New definition.
1544 (print_insn_m68k): Avoid overflow when computing third argument of
1546 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1547 Use disp instead of val to store offset values.
1548 (print_indexed): Use base_disp instead of word to store base
1549 displacement, to avoid overflow.
1550 * m10300-dis.c (disassemble): Cast value to long when computing
1551 pc-relative address, to get correct sign extension.
1553 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1555 * m32r-opc.c: Regenerate.
1557 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1559 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1560 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1562 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1564 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1566 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1568 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1570 (OP_DSreg): Rename from OP_DSSI.
1571 (OP_ESreg): Rename from OP_ESDI.
1572 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1574 (append_seg): Rename from append_prefix.
1575 (ptr_reg): New function.
1576 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1578 (PREFIX_ADDR): Rename from PREFIX_ADR.
1579 (float_reg): Add non-broken opcodes for people who don't want
1582 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1584 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1587 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1589 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1591 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1593 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1594 0; produce error message for shifts of size 32 (or 64 for 64-bit
1595 shifts), because the hardware doesn't support them.
1597 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1599 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1600 LONG_2, LONG_2b formats to use this new operand.
1602 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1604 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1606 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1608 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1609 endian data support.
1611 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1613 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1614 and SHORT_B3b formats to use Rb instead of Ra.
1616 Add FLAG_MUL16 to MUL2XH opcode.
1618 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1619 to existing 1.1.1 parallelisation prohibition procedure.
1621 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1623 * m32r-asm.c,m32r-dis.c: Regenerate.
1625 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1627 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1628 with a shift count of 0.
1630 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1632 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1633 (cgen_hw_lookup_by_num): New function.
1635 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1637 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1639 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1641 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1642 as big-endian on SPARClite.
1644 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1646 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1648 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1650 * po/Make-in (install-info): New target.
1652 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1654 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1655 * configure: Rebuild.
1657 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1659 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1660 variety of ISA2 instructions to set bottom ten bits of trap code.
1662 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1664 * Makefile.am (config.status): Add explicit target so that
1665 config.status depends upon bfd/configure.in.
1666 * Makefile.in: Rebuild.
1668 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1670 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1671 instructions to set bottom ten bits of break code.
1672 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1673 for above optional argument.
1675 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1677 * makefile.vms: Run dec c with /nodebug.
1679 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1681 * Makefile.in: Rebuilt.
1682 * Makefile.am: Regenerated dependencies with mkdep.
1684 * opintl.h (_): Define as dgettext.
1686 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1688 * cgen-asm.c: Internationalised.
1689 * m32r-asm.c: Internationalised.
1690 * m32r-dis.c: Internationalised.
1691 * m32r-opc.c: Internationalised.
1693 * aclocal.m4: Regenerated.
1694 * configure: Regenerated.
1695 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1696 * Makefile.in: Rebuild.
1697 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1698 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1700 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1702 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1704 * aclocal.m4, configure: Rebuild with current tools.
1706 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1708 * opintl.h: New file - contains internationalisation macros used
1709 by source files in this directory.
1710 * po/: New subdirectory - contains internationalisation files.
1711 * po/Make-in: New file - Makefile constructor.
1712 * po/POTFILES.in: New file - list of files in opcodes directory
1713 that should be scan for internationalisation macros.
1714 * po/opcodes.pot: New file - list of internationisation strings
1715 found in files mentioned in po/POTFILES.in.
1716 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1717 entry. Add intl directory to include paths.
1718 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1719 HAVE_STRCPY, HAVE_LC_MESSAGES
1720 * configure.in: Add rule to build Makefile in po subdirectory.
1721 * Makefile.in: Rebuilt.
1722 * aclocal.m4: Rebuilt.
1723 * config.in: Rebuilt.
1724 * configure: Rebuilt.
1725 * alpha-opc.c: Internationalised.
1726 * arc-dis.c: Internationalised.
1727 * arc-opc.c: Internationalised.
1728 * arm-dis.c: Internationalised.
1729 * cgen-asm.c: Internationalised.
1730 * d30v-dis.c: Internationalised.
1731 * dis-buf.c: Internationalised.
1732 * h8300-dis.c: Internationalised.
1733 * h8500-dis.c: Internationalised.
1734 * i386-dis.c: Internationalised.
1735 * m10200-dis.c: Internationalised.
1736 * m10300-dis.c: Internationalised.
1737 * m68k-dis.c: Internationalised.
1738 * m88k-dis.c: Internationalised.
1739 * mips-dis.c: Internationalised.
1740 * ns32k-dis.c: Internationalised.
1741 * opintl.h: Internationalised.
1742 * ppc-opc.c: Internationalised.
1743 * sparc-dis.c: Internationalised.
1744 * v850-dis.c: Internationalised.
1745 * v850-opc.c: Internationalised.
1747 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1749 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1750 (asm_hash_table_entries): New variable.
1751 (cgen_asm_init): Free asm_hash_table_entries.
1752 (hash_insn_array,hash_insn_list): New functions.
1753 (build_asm_hash_table): Use them. Hash macro insns as well.
1754 (cgen_asm_lookup_insn): Update.
1755 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1756 (dis_hash_table_entries): New variable.
1757 (cgen_dis_init): Free dis_hash_table_entries.
1758 (hash_insn_array,hash_insn_list): New functions.
1759 (build_dis_hash_table): Use them. Hash macro insns as well.
1760 (cgen_dis_lookup_insn): Update.
1761 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1762 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1763 (cgen_macro_insn_count): New function.
1764 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1766 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1768 * i386-dis.c (OP_DSSI): Print segment override.
1770 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1772 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1775 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1777 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1778 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1779 * configure.in: Define and substitute WIN32LDFLAGS and
1781 * aclocal.m4: Rebuild with new libtool.
1782 * configure, Makefile.in: Rebuild.
1784 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1786 * m32r-opc.c: Regenerate.
1788 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1790 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1791 before trying to copy it.
1792 * Makefile.in: Rebuild.
1794 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1796 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1798 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1800 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1801 from an arbitrary valid buffer instead of fetching them on demand
1803 (invalid_float): use bit_extract_simple() instead of bit_extract().
1805 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1807 From H.J. Lu <hjl@gnu.org>:
1808 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1811 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1813 * Branched binutils 2.9.
1815 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1817 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1818 disassembling last 4 bytes of a section.
1820 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1822 Fix some gcc -Wall warnings:
1823 * arc-dis.c (print_insn): Add casts to avoid warnings.
1824 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1825 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1826 * m10200-dis.c (disassemble): Likewise.
1827 * m10300-dis.c (disassemble): Likewise.
1828 * ns32k-dis.c (print_insn_ns32k): Likewise.
1829 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1830 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1831 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1832 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1833 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1834 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1835 * tic80-dis.c (print_one_instruction): Likewise.
1836 * w65-dis.c (print_operand): Likewise.
1837 * z8k-dis.c (fetch_data): Likewise.
1838 * a29k-dis.c: Add return type for find_byte_func_type.
1839 * arc-opc.c: Include <stdio.h>. Remove declarations of
1840 insert_multshift and extract_multshift.
1841 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1843 (extract_value): Fully parenthesize expression.
1844 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1845 * h8500-opc.h (h8500_table): Fully bracket initializer.
1846 * w65-opc.h (optable): Likewise.
1847 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1848 * i386-dis.c (OP_E): Initialize local variables.
1849 * m10200-dis.c (print_insn_mn10200): Likewise.
1850 * mips-dis.c (print_insn_mips16): Likewise.
1851 * sh-dis.c (print_insn_shx): Likewise.
1852 * v850-dis.c (print_insn_v850): Likewise.
1853 * ns32k-dis.c (print_insn_arg): Declare.
1854 (get_displacement, invalid_float): Declare.
1855 (list_search, sign_extend, flip_bytes): Declare return type.
1856 (get_displacement): Likewise.
1857 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1859 (print_insn_ns32k): Make i unsigned.
1860 (invalid_float): Make static. Declare type of val.
1861 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1862 on each for iteration.
1863 * tic30-dis.c (get_indirect_operand): Likewise.
1864 * z8k-dis.c (print_insn_z8001): Declare return type.
1865 (print_insn_z8002): Likewise.
1866 (unparse_instr): Fix sprintf format strings.
1868 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1870 * mips-opc.c: Add "sync.l" and "sync.p".
1872 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1874 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1875 default m68k variant to recognize.
1877 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1878 (ctrl, cobr, mem, ea): Likewise.
1879 (print_addr): Likewise. Remove cast.
1880 (ea): Cast argument of print_addr to bfd_vma.
1882 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1884 (cgen_parse_unsigned_integer): Likewise.
1885 (cgen_parse_address): Likewise.
1887 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1889 * i960-dis.c (ctrl): Add full braces to structure initialization.
1890 (cobr, mem, reg): Likewise.
1891 (ea): Correct parenthesization in expression.
1893 * cgen-asm.c: Include <ctype.h>.
1894 (build_asm_hash_table): Remove unused local variable i.
1895 (cgen_parse_keyword): Add casts to avoid warnings.
1897 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1898 symbol. Fix indentation.
1899 (print_insn_little_arm): Likewise.
1901 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1903 * configure.in: Use AM_DISABLE_SHARED.
1904 * aclocal.m4, configure: Rebuild with libtool 1.2.
1906 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1908 These patches are courtesy of Jonathan Walton and Tony Thompson
1909 (athompso@cambridge.arm.com).
1911 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1914 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1915 both the offset and the label closest to the destination.
1917 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1919 * m32r-opc.h: Regenerate.
1921 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1923 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1925 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1927 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1928 assume that info->symbols is non-empty.
1930 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1932 * alpha-opc.c (cvtqs) There is no such thing.
1933 (cvttq): Missing most of the /*d variants.
1935 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1937 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1938 delayed branches or jumps.
1940 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1942 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1944 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1945 * tic30-dis.c (print_branch): Likewise.
1947 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1949 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1950 saved_symbol code as it is no longer needed.
1952 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1954 * cgen-asm.c: Include symcat.h.
1955 * cgen-dis.c,cgen-opc.c: Ditto.
1956 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1958 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1960 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1962 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1964 * m32r-opc.[ch]: Regenerate.
1966 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1968 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1969 arguments. Don't perform validation here.
1970 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1972 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1974 * m32r-opc.c: Regenerate.
1976 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1978 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1979 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1981 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1983 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1985 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1987 * configure.in: Get the version number from BFD.
1988 * configure: Rebuild.
1990 From H.J. Lu <hjl@gnu.org>:
1991 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1992 * Makefile.in: Rebuild.
1994 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1996 * m32r-opc.c: Regenerate.
1997 * m32r-opc.h: Regenerate.
1999 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
2001 * m32r-opc.c: Regenerate.
2003 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
2005 Fix rac to accept only a0:
2006 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
2007 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
2008 Introduce OPERAND_GPR.
2009 * d10v-dis.c (print_operand): Likewise.
2011 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
2013 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
2014 (cgen_hw_lookup): Make result const.
2015 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2017 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
2019 * configure, aclocal.m4: Rebuild with new libtool.
2021 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
2023 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
2024 instructions use a PC relative branch, not absolute.
2026 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
2028 * configure.in: Set libtool_enable_shared rather than
2029 libtool_shared. Remove diversion hack.
2030 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
2032 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
2034 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
2035 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
2037 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
2039 * tic30-dis.c: New file.
2040 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
2041 * configure.in: Handle bfd_tic30_arch.
2042 * Makefile.am: Rebuild dependencies.
2043 (CFILES): Add tic30-dis.c
2044 (ALL_MACHINES): Add tic30-dis.lo.
2045 * configure, Makefile.in: Rebuild.
2047 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
2049 * m32r-opc.h (HAVE_CPU_M32R): Define.
2051 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
2053 * v850-opc.c (insertion routines): If both alignment and size is
2054 wrong then report this.
2056 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
2058 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
2059 Only recognize instructions for the current target_processor.
2061 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
2063 * d10v-dis.c (PC_MASK): Correct value.
2064 (print_operand): If there's a reloc, don't calculate the
2065 address because they could be in different sections.
2067 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
2069 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
2070 instruction after the 4650's "mul" instruction; nobody's using the
2071 4010 these days. If object files someday indicate which processor
2072 variant they're intended for, we can do a better job at this.
2074 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
2076 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
2077 table provided entry size. Use CGEN_INSN_MNEMONIC.
2078 (cgen_parse_keyword): Rewrite.
2079 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
2080 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
2081 * cgen-opc.c: Clean up pass over `struct foo' usage.
2082 (cgen_keyword_lookup_value): Handle "" entry.
2083 (cgen_keyword_add): Likewise.
2085 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
2087 * mips-opc.c: Add FP_D to s.d instruction flags.
2089 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2091 * m68k-opc.c (halt, pulse): Enable them on the 68060.
2093 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
2095 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
2096 PC relative offset forms before the 15 bit forms. An assembler command
2097 line option now chooses the default.
2099 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
2101 * d30v-opc.c (d30v_opcode_table): Set new flags bits
2102 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
2104 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
2106 * configure: Only build libopcodes shared if --enable-shared's value
2107 was `yes', or was set to `*opcodes*'.
2108 * aclocal.m4: Likewise.
2109 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
2110 original source of this bit of code. It's not clear what the best fix
2113 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
2115 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
2116 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
2117 offset forms before the 15 bit forms, to default to the long forms.
2119 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
2121 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
2123 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
2125 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
2126 symbol if none is present.
2127 (print_insn_big_arm): Prevent examination of stored symbol if
2130 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
2132 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
2134 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
2136 * disassemble.c: Remove disasm_symaddr() function.
2138 * arm-dis.c: Use info->symbol instead of info->flags to determine
2139 if disassmbly should be in Thumb or Arm mode.
2141 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
2143 * arm-dis.c: Add support for disassembling Thumb opcodes.
2144 (print_insn_thumb): New function.
2146 * disassemble.c (disasm_symaddr): New function.
2148 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
2149 (thumb_opcodes): Table of Thumb opcodes.
2151 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2153 * m68k-opc.c (btst): Change Dd@s to Dd;b.
2155 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
2156 and 'v' as operand types.
2158 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
2160 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
2161 <olivier.carmona@di.epfl.ch>.
2162 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
2163 which has a two word opcode with a one word argument.
2165 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
2167 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
2168 unsigned, not signed.
2169 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
2171 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2173 * d10v-dis.c (print_operand):
2174 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
2176 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2178 * d10v-opc.c (OPERAND_FLAG): Split into:
2179 (OPERAND_FFLAG, OPERAND_CFLAG) .
2183 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
2185 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2186 field for all INSN_MACRO's.
2187 * mips16-opc.c: same
2189 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
2191 * mips-opc.c (sync,cache): These are 3900 insns.
2193 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2195 sh-opc.h (sh_table): Remove ftst/nan.
2197 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2199 * mips-opc.c (ffc, ffs): Fix mask.
2201 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2203 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2206 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2208 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2209 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2211 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2213 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2214 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2216 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2218 * v850-dis.c (disassemble): Replace // with /* ... */
2220 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2222 * sparc-opc.c: Add wr & rd for v9a asr's.
2223 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2224 (v9a_asr_reg_names): New variable.
2225 Patch from David Miller <davem@vger.rutgers.edu>.
2227 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2229 * sparc-opc.c (v9notv9a): New insn type.
2230 (IMPDEP): Move to the end to not conflict with edge8 et al.
2231 Patch from David Miller <davem@vger.rutgers.edu>.
2233 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2235 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2237 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2239 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2241 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2243 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2244 of disassemble_info structure to determine if an overlay address
2245 has a matching symbol in low memory.
2247 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2248 new symbol_at_address_func field in disassemble_info structure.
2250 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2252 * v850-opc.c (extract_d22): Use signed arithmatic.
2254 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2256 * mips-opc.c: Three op mult is not an ISA insn.
2258 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2260 * mips-opc.c: Fix formatting.
2262 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2264 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2265 than assuming that char is signed. Explicitly sign extend 16 bit
2266 values, rather than assuming that short is 16 bits.
2267 (OP_sI, OP_J, OP_DIR): Likewise.
2269 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2271 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2274 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2276 * v850-opc.c: Fix typo in comment.
2278 * v850-dis.c (disassemble): Add test of processor type when
2279 determining opcodes.
2281 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2283 * configure.in: Use a diversion to set enable_shared before the
2284 arguments are parsed.
2285 * configure: Rebuild.
2287 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2289 * m68k-opc.c (TBL1): Use ! rather than `.
2290 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2292 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2294 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2296 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2298 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2301 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2302 * aclocal.m4: Rebuild with new libtool.
2303 * configure: Rebuild.
2305 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2307 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2309 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2311 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2313 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2315 * v850-opc.c (v850_opcodes): Further rearrangements.
2317 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2319 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2321 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2323 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2326 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2328 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2330 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2332 * v850-opc.c: Initialise processors field of v850_opcode structure.
2334 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2336 Merge changes from Martin Hunt:
2338 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2340 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2341 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2342 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2344 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2346 * d30v-dis.c (print_insn): First operand of d*i (delayed
2347 branch) instructions is relative.
2349 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2350 (d30v_operand_table): Add IMM6S3 type.
2351 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2353 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2354 and cmp instructions.
2356 * d30v-opc.c: Correct entries for repeat*, and sat*.
2357 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2358 types. Correct several formats.
2360 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2362 * d30v-opc.c (pre_defined_registers): Change control registers.
2364 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2365 SHORT_C2. Manual was incorrect.
2367 * d30v-dis.c (lookup_opcode): Return value now indicates
2368 if an opcode has a short and a long form. Used for deciding
2369 to append a ".s" or ".l".
2370 (print_insn): Append a ".s" to an instruction if it is
2371 the short form and ".l" if it is a long form. Do not append
2372 anything if the instruction has only one possible size.
2374 * d30v-opc.c: Change mulx2h to require an even register.
2375 New form: SHORT_A2; a SHORT_A form that needs an even
2376 register as the first operand.
2378 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2379 instruction was not being disassembled if there were an odd
2380 number of instructions.
2382 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2384 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2386 * v850-dis.c (disassemble): Improved display of register lists.
2388 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2390 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2391 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2392 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2393 fandnot1s, fandnot2s.
2395 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2397 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2399 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2401 * cgen-asm.c (cgen_parse_address): New argument resultp.
2402 All callers updated.
2403 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2405 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2407 * mn10200-dis.c (disassemble): PC relative instructions are
2408 relative to the next instruction, not the current instruction.
2410 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2412 * v850-dis.c (disassemble): Only signed extend values that are not
2413 returned by extract functions.
2414 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2416 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2418 * v850-opc.c: Update comments. Remove use of
2419 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2421 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2423 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2425 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2427 * configure: Rebuilt with latest devo autoconf for NT support.
2429 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2431 * v850-dis.c (disassemble): Use curly brace syntax for register
2434 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2435 where r0 is being used as a destination register.
2437 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2439 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2441 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2443 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2445 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2447 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2448 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2451 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2453 * configure (cgen_files): Add support for v850e target.
2454 * configure.in (cgen_files): Add support for v850e target.
2456 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2458 * configure (cgen_files): Add support for v850ea target.
2459 * configure.in (cgen_files): Add support for v850ea target.
2461 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2463 * configure.in (bfd_arc_arch): Add.
2464 * configure: Rebuild.
2465 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2466 * Makefile.in: Rebuild.
2467 * arc-dis.c, arc-opc.c: New files.
2468 * disassemble.c (ARCH_all): Define ARCH_arc.
2469 (disassembler): Add ARC support.
2471 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2473 * v850-dis.c (disassemble): Add support for v850EA instructions.
2475 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2476 (v850_opcodes): Add v850EA instructions.
2478 * v850-dis.c (disassemble): Add support for v850E instructions.
2480 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2481 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2482 insert_spe, extract_spe): New Functions.
2483 (v850_opcodes): Add v850E instructions.
2485 * v850-opc.c: Reorganised and re-layed out to improve readability
2488 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2490 * configure: Rebuild with autoconf 2.12.1.
2492 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2494 * aclocal.m4, configure: Rebuild with new automake patches.
2496 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2498 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2499 * acinclude.m4: Just include acinclude.m4 from BFD.
2500 * aclocal.m4, configure: Rebuild.
2502 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2504 * Makefile.am: New file, based on old Makefile.in.
2505 * acconfig.h: New file.
2506 * acinclude.m4: New file.
2507 * stamp-h.in: New file.
2508 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2509 Removed shared library handling; now handled by libtool. Replace
2510 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2511 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2512 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2513 handling in AC_OUTPUT.
2514 * dep-in.sed: Change .o to .lo.
2515 * Makefile.in: Now built with automake.
2516 * aclocal.m4: Now built with aclocal.
2517 * config.in, configure: Rebuild.
2519 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2521 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2523 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2525 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2527 * sparc-dis.c (sorted_opcodes): New static local.
2528 (struct opcode_hash): `opcode' is pointer to const element.
2529 (build_hash): First arg is now table of sorted pointers.
2530 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2531 (compare_opcodes): Update.
2533 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2535 * cgen-opc.c: #include <ctype.h>.
2536 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2537 Handle case insensitive hashing.
2538 (hash_keyword_value): Change type of `value' to unsigned int.
2540 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2542 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2543 precision FP, mark it as such. Likewise for double precision
2544 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2547 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2549 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2551 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2552 nesting depth when all the macros are expanded.
2554 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2556 * sparc-opc.c: The fcmp v9a instructions take an integer register
2557 as a destination, not a floating point register. From Christian
2558 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2560 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2562 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2563 syntax. From Roman Hodek
2564 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2566 * i386-dis.c (twobyte_has_modrm): Fix pand.
2568 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2570 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2572 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2574 * arm-dis.c: Add prototypes for arm_decode_shift and
2577 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2579 * mips-opc.c: Add r3900 insns.
2581 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2583 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2584 print delay slot instructions on the same line. When using a PC
2585 relative load, add a comment with the value being loaded if it can
2588 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2590 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2591 to pushS/popS for segment regs and byte constant so that
2592 pushw/popw printed when in 16 bit data mode.
2594 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2595 print cbtw, cwtd in 16 bit data mode.
2596 * i386-dis.c (putop): extra case W to support above.
2598 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2599 address size prefix in 16 bit address mode.
2601 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2603 * sh-dis.c: Reindent. Rename local variable fprintf to
2606 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2608 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2610 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2612 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2614 * mips16-opc.c (mip16_opcodes): same.
2616 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2618 * m68k-opc.c (moveb): Change $d to %d.
2620 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2622 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2623 (twobyte_has_modrm): Likewise.
2625 (OP_MMX, OP_EM, OP_MS): New static functions.
2627 * i386-dis.c: Revert patch of April 4. The output now matches
2630 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2632 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2635 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2637 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2639 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2641 * Makefile.in (install): Depend upon installdirs.
2642 (installdirs): New target.
2644 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2646 From Thomas Graichen <graichen@rzpd.de>:
2647 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2648 * configure: Rebuild.
2650 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2652 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2653 Delete string{,s}.h support.
2655 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2657 * cgen-asm.c (cgen_parse_operand_fn): New global.
2658 (cgen_parse_{{,un}signed_integer,address}): Update call to
2659 cgen_parse_operand_fn.
2660 (cgen_init_parse_operand): New function.
2661 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2662 from cgen_asm_init_parse.
2663 (m32r_cgen_assemble_insn): New operand `errmsg'.
2664 Delete call to as_bad, return error message to caller.
2665 (m32r_cgen_asm_hash_keywords): #if 0 out.
2667 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2669 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2671 [case 'J']: Fix typo in register name.
2673 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2675 * configure.in: Substitute SHLIB_LIBS.
2676 * configure: Rebuild.
2677 * Makefile.in (SHLIB_LIBS): New variable.
2678 ($(SHLIB)): Use $(SHLIB_LIBS).
2680 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2682 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2684 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2686 * disassemble.c (disassembler): Handle m32r.
2688 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2690 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2691 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2692 * Makefile.in (CFILES): Add them.
2693 (ALL_MACHINES): Add them.
2694 (dependencies): Regenerate.
2695 * configure.in (cgen_files): New variable.
2696 (bfd_m32r_arch): Add entry.
2697 * configure: Regenerate.
2699 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2701 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2702 * configure: Rebuild.
2704 * Makefile.in: Rebuild dependencies.
2706 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2708 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2711 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2713 * Branched binutils 2.8.
2715 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2717 * m10200-dis.c: Rename from mn10200-dis.c.
2718 * m10200-opc.c: Rename from mn10200-opc.c.
2719 * m10300-dis.c: Rename from mn10300-dis.c
2720 * m10300-opc.c: Rename from mn10300-opc.c.
2721 * Makefile.in: Update accordingly.
2723 * mips16-opc.c: Add mul and dmul macros.
2725 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2727 * makefile.vms: Update CFLAGS, add clean target.
2729 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2731 * mips-opc.c: Add "wait". From Ralf Baechle
2732 <ralf@gnu.ai.mit.edu>.
2734 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2735 * configure, config.in: Rebuild.
2736 * sysdep.h: Include <stdlib.h> if it exists.
2737 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2739 * Makefile.in: Rebuild dependencies.
2741 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2743 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2744 Andrew Bray <andy@madhouse.demon.co.uk>.
2746 * mips-opc.c: Add cast when setting mips_opcodes.
2748 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2750 * v850-dis.c (disassemble): Fix sign extension problem.
2751 * v850-opc.c (extract_d*): Fix sign extension problems to make
2752 disassembly calculate branch offsets correctly.
2754 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2756 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2758 * mips-opc.c: Add dctr and dctw.
2760 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2762 * d30v-dis.c (print_insn): Change the way signed constants
2765 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2767 * Makefile.in (BFD_H): New variable.
2768 (HFILES): New variable.
2769 (CFILES): Add all C files.
2770 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2771 Delete old dependencies, and build new ones.
2772 * dep-in.sed: New file.
2774 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2776 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2778 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2780 * mn10200-opc.c: Change "trap" to "syscall".
2781 * mn10300-opc.c: Add new "syscall" instruction.
2783 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2785 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2786 mulul insns on the coldfire.
2788 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2790 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2791 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2792 (print_insn_little_arm): Likewise.
2794 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2796 Based on patches from H.J. Lu <hjl@lucon.org>:
2797 * i386-dis.c (fetch_data): Add prototype.
2798 * m68k-dis.c (fetch_data): Add prototype.
2799 (dummy_print_address): Add prototype. Make static.
2800 * ppc-opc.c (valid_bo): Add prototype.
2801 * sparc-dis.c (build_hash_table): Add prototype.
2802 (is_delayed_branch, compute_arch_mask): Add prototypes.
2803 (print_insn_sparc): Make several local variables const.
2804 (compare_opcodes): Change arguments to const PTR. Add prototype.
2805 * sparc-opc.c (arg): Change name field to be const.
2806 (lookup_name, lookup_value): Add prototypes. Change table and
2807 name parameters to be const.
2808 (sparc_encode_asi): Change name parameter to be const.
2809 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2810 (sparc_encode_sparclet_cpreg): Likewise.
2811 (sparc_decode_asi): Change return type to be const.
2812 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2813 (sparc_decode_sparclet_cpreg): Likewise.
2815 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2817 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2818 Solaris doesn't like the combined options, and the -f is
2820 (stamp-tshlink, install): Likewise.
2822 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2824 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2827 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2829 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2831 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2833 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2836 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2838 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2840 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2842 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2844 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2846 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2848 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2850 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2851 floatformat_to_double to make portable.
2852 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2855 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2857 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2858 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2860 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2862 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2863 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2865 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2867 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2868 (OFF_SL_BR_SCALED): ... to this, and added the flag
2869 TIC80_OPERAND_BASEREL to the flags word.
2870 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2873 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2875 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2876 Change mips_opcodes from const array to a pointer,
2877 and change bfd_mips_num_opcodes from const int to int,
2878 so that we can increase the size of the mips opcodes table
2881 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2883 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2884 store BITNUM values in the table in one's complement form
2885 to match behavior when assembler is given a raw numeric
2886 value for a BITNUM operand.
2887 * tic80-dis.c (print_operand_bitnum): Ditto.
2889 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2891 * d30v-opc.c: Removed references to FLAG_X.
2893 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2895 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2897 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2899 * Makefile.in: Added d30v object files.
2900 * configure: (bfd_d30v_arch) Rebuilt.
2901 * configure.in: (bfd_d30v_arch) Added new case.
2902 * d30v-dis.c: New file.
2903 * d30v-opc.c: New file.
2904 * disassemble.c (disassembler) Add entry for d30v.
2906 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2908 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2909 representations for the floating point BITNUM values.
2911 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2913 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2914 in the table in one's complement form, as they appear in the
2916 (tic80_symbol_to_value): Use macros to access predefined
2918 (tic80_value_to_symbol): Ditto.
2919 (tic80_next_predefined_symbol): New function.
2920 * tic80-dis.c (print_operand_bitnum): Remove code that did
2921 one's complement for BITNUM values.
2923 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2925 * makefile.vms: Remove 8 bit characters. Update to latest
2928 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2930 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2932 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2934 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2935 (IMM24_PCREL): Likewise.
2937 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2939 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2940 address for an extended PC relative instruction that is not a
2943 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2945 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2948 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2950 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2951 (tic80_opcodes): Sort entries so that long immediate forms
2952 come after short immediate forms, making it easier for
2953 assembler to select the right one for a given operand.
2955 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2957 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2959 (print_insn_mips16): Likewise.
2961 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2963 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2964 a symbol class that restricts translation to just that
2965 class (general register, condition code, etc).
2967 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2969 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2970 and REG_DEST_E for register operands that have to be
2971 an even numbered register. Add REG_FPA for operands that
2972 are one of the floating point accumulator registers.
2973 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2974 (tic80_opcodes): Change entries that need even numbered
2975 register operands to use the new operand table entries.
2976 Add "or" entries that are identical to "or.tt" entries.
2978 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2980 * mips16-opc.c: Add new cases of exit instruction for
2982 * mips-dis.c (print_mips16_insn_arg): Display floating point
2983 registers in operands of exit instruction. Print `$' before
2984 register names in operands of entry and exit instructions.
2986 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2988 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2989 pairs for all predefined symbols recognized by the assembler.
2990 Also used by the disassembling routines.
2991 (tic80_symbol_to_value): New function.
2992 (tic80_value_to_symbol): New function.
2993 * tic80-dis.c (print_operand_control_register,
2994 print_operand_condition_code, print_operand_bitnum):
2995 Remove private tables and use tic80_value_to_symbol function.
2997 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2999 * d10v-dis.c (print_operand): Change address printing
3000 to correctly handle PC wrapping. Fixes PR11490.
3002 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
3004 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
3007 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
3009 * mips-dis.c (print_insn_mips16): Set insn_info information.
3010 (print_mips16_insn_arg): Likewise.
3012 * mips-dis.c (print_insn_mips16): Better handling of an extend
3013 opcode followed by an instruction which can not be extended.
3015 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
3017 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
3018 coldfire moveb instruction to not allow an address register as
3019 destination. Although the documentation does not indicate that
3020 this is invalid, experiments uncovered unexpected behavior.
3021 Added a comment explaining the situation. Thanks to Andreas
3022 Schwab for pointing this out to me.
3024 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
3026 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
3027 entries are presorted so that entries with the same mnemonic are
3028 adjacent to each other in the table. Sort the entries for each
3029 instruction so that this is true.
3031 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3033 * m68k-dis.c: Include <libiberty.h>.
3034 (print_insn_m68k): Sort the opcode table on the most significant
3035 nibble of the opcode.
3037 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
3039 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
3040 "vsub", "vst", "xnor", and "xor" instructions.
3041 (V_a1): Renamed from V_a, msb of accumulator reg number.
3042 (V_a0): Add macro, lsb of accumulator reg number.
3044 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
3046 * tic80-dis.c (print_insn_tic80): Broke excessively long
3047 function up into several smaller ones and arranged for
3048 the instruction printing function to be callable recursively
3049 to print vector instructions that have both a load and a
3050 math instruction packed into a single opcode.
3051 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
3052 to explain why it comes after the other vector opcodes.
3054 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
3056 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
3057 move insns to handle immediate operands.
3059 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3061 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
3062 fix operand mask in the "moveml" entries for the coldfire.
3064 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
3066 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
3067 New macros for building vector instruction opcodes.
3068 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
3069 FMT_LI, which were unused. The field is now a flags field.
3070 Remove some opcodes that are possible, but illegal, such
3071 as long immediate instructions with doubles for immediate
3072 values. Add "vadd" and "vld" instructions.
3074 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
3076 * tic80-opc.c (tic80_operands): Reorder some table entries to make
3077 the order more logical. Move the shift alias instructions ("rotl",
3078 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
3079 interspersed with the regular sr.x and sl.x instructions. Add
3080 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3081 "sub", "subu", "swcr", and "trap".
3083 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
3085 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3086 (OFF_SL_PC): Renamed from OFF_SL.
3087 (OFF_SS_BR): New operand type for base relative operand.
3088 (OFF_SL_BR): New operand type for base relative operand.
3089 (REG_BASE): New operand type for base register operand.
3090 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3091 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3092 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3094 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3095 10 char field, padded with spaces on rhs, rather than a string
3096 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3097 than old TIC80_OPERAND_RELATIVE. Add support for new
3098 TIC80_OPERAND_BASEREL flag bit.
3100 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3102 * tic80-dis.c (print_insn_tic80): Print floating point operands
3104 * tic80-opc.c (SPFI): Add single precision floating point
3105 immediate operand type.
3106 (ROTATE): Add rotate operand type for shifts.
3107 (ENDMASK): Add for shifts.
3108 (n): Macro for the 'n' bit.
3109 (i): Macro for the 'i' bit.
3110 (PD): Macro for the 'PD' field.
3111 (P2): Macro for the 'P2' field.
3112 (P1): Macro for the 'P1' field.
3113 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3116 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3118 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3119 adding in current address for pc-relative operands.
3121 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3123 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3124 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3125 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3126 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3127 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3128 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3129 (REG_SCALED, LSI_SCALED): New operand types.
3130 (E): New macro for 'E' bit at bit 27.
3131 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3132 opcodes, including the various size flavors (b,h,w,d) for
3133 the direct load and store instructions.
3135 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3137 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3139 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3140 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3141 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3142 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3143 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3144 masks with "MASK_* & ~M_*" to get the M bit reset.
3145 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3147 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3149 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3150 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3151 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3153 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3154 CC, SICR, and LICR table entries.
3155 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3156 "bcnd", and "brcr" opcodes.
3158 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3160 * ppc-opc.c (powerpc_operands): Make comment match the
3161 actual fields (no shift field).
3162 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3163 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3164 partial implementation, work in progress.
3165 * tic80-opc.c (tic80_operands): Begin construction operands table.
3166 (tic80_opcodes): Continue populating opcodes table and start
3167 filling in the operand indices.
3168 (tic80_num_opcodes): Add this.
3170 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3172 * m68k-opc.c: Add #B case for moveq.
3174 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3176 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3177 before they are used.
3179 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3181 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3182 for "breakpoint" instruction.
3184 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3186 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3187 (dep): Use ALL_CFLAGS rather than CFLAGS.
3189 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3191 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3194 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3196 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3197 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3199 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3201 * mips16-opc.c: Add "abs".
3203 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3205 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3206 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3207 (disassembler): Add bfd_arch_tic80 support to set disassemble
3208 to print_insn_tic80.
3209 * tic80-dis.c (print_insn_tic80): Add stub.
3211 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3213 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3214 * configure: Regenerate with autoconf.
3215 * tic80-dis.c: Add file.
3216 * tic80-opc.c: Add file.
3218 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3220 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3222 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3224 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3225 (mn10200_opcodes): Use it for some logicals and btst insns.
3226 Add "break" and "trap" instructions.
3228 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3230 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3232 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3234 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3235 relative load or add now depends upon whether the instruction is
3238 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3240 * mn10200-dis.c: Finish writing disassembler.
3241 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3242 Fix mask for "jmp (an)".
3244 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3245 handle endianness issues for mn10300.
3247 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3249 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3251 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3252 instruction. Fix opcode field for "movb (imm24),dn".
3254 * mn10200-opc.c (mn10200_operands): Fix insertion position
3257 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3259 * mn10200-opc.c: Create mn10200 opcode table.
3260 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3261 but moving along nicely.
3263 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3265 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3267 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3269 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3270 specifiers for fmovem* instructions.
3272 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3274 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3276 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3278 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3281 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3283 * mn10300-opc.c: Add some comments explaining the various
3286 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3288 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3290 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3293 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3294 operand specifiers in fmovm* instructions.
3296 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3298 * ppc-opc.c (insert_li): Give an error if the offset has the two
3299 least significant bits set.
3301 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3303 * mips-dis.c (print_insn_mips16): Separate the instruction from
3304 the arguments with a tab, not a space.
3306 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3308 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3311 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3314 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3316 * configure: Rebuild with autoconf 2.12.
3318 Add support for mips16 (16 bit MIPS implementation):
3319 * mips16-opc.c: New file.
3320 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3321 (mips16_reg_names): New static array.
3322 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3323 after seeing a 16 bit symbol.
3324 (print_insn_little_mips): Likewise.
3325 (print_insn_mips16): New static function.
3326 (print_mips16_insn_arg): New static function.
3327 * mips-opc.c: Add jalx instruction.
3328 * Makefile.in (mips16-opc.o): New target.
3329 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3330 * configure: Rebuild.
3332 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3334 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3335 operand specifiers in *save, *restore and movem* instructions.
3337 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3340 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3341 register operands for immediate arithmetic, not, neg, negx, and
3342 set according to condition instructions.
3344 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3345 specifier of the effective-address operand in immediate forms of
3346 arithmetic instructions. The specifier for the immediate operand
3347 notes how and where the constant will be stored.
3349 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3351 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3354 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3357 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3359 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3361 * mn10300-dis.c (disassemble): Handle register lists.
3363 * mn10300-opc.c: Fix handling of register list operand for
3364 "call", "ret", and "rets" instructions.
3366 * mn10300-dis.c (disassemble): Print PC-relative and memory
3367 addresses symbolically if possible.
3368 * mn10300-opc.c: Distinguish between absolute memory addresses,
3369 pc-relative offsets & random immediates.
3371 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3373 (disassemble): Handle SPLIT and EXTENDED operands.
3375 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3377 * mn10300-dis.c: Rough cut at printing some operands.
3379 * mn10300-dis.c: Start working on disassembler support.
3380 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3382 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3384 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3386 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3388 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3390 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3392 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3393 register argument is calls and jmp instructions.
3395 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3397 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3398 getx operand. Fix opcode for mulqu imm,dn.
3400 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3402 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3403 in MN10300_OPERAND_SPLIT operands for how many bits
3404 appear in the basic insn word. Add IMM32_HIGH24,
3405 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3406 (mn10300_opcodes): Use new operands as needed.
3408 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3409 for bset, bclr, btst instructions.
3410 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3412 * mn10300-opc.c (mn10300_operands): Remove many redundant
3413 operands. Update opcode table as appropriate.
3414 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3415 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3417 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3419 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3420 operands (for indexed load/stores). Fix bitpos for DI
3421 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3422 few instructions that insert immediates/displacements in the
3423 middle of the instruction. Add IMM8E for 8 bit immediate in
3424 the extended part of an instruction.
3425 (mn10300_operands): Use new opcodes as appropriate.
3427 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3429 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3430 sequential so the assembler never parallelizes it with
3433 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3435 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3436 a data/address register that appears in register field 0
3437 and register field 1.
3438 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3440 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3442 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3443 standard disassembly.
3445 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3446 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3447 Recategorize PALcode instructions.
3449 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3451 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3453 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3455 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3456 there are no operand types.
3458 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3460 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3462 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3464 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3466 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3468 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3470 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3471 and sst.w instructions.
3473 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3476 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3478 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3481 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3483 * ppc-opc.c (PPCPWR2): Define.
3484 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3487 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3489 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3490 field for movhu instruction.
3492 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3493 cast value to "long" not "signed long" to keep hpux10
3496 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3498 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3501 * mn10300-opc.c (FMT*): Remove definitions.
3503 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3504 for shift-by-register opcodes.
3506 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3507 into [AD][MN][01] for encoding the position of the register
3510 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3512 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3513 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3515 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3517 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3518 Fix various typos. Add "PAREN" operand.
3519 (MEM, MEM2): Define.
3520 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3521 operands. Fix several typos.
3523 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3526 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3528 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3529 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3531 (mn10300_opcodes): Break opcode format out into its own field.
3532 Update many operand fields to deal with signed vs unsigned
3533 issues. Fix one or two typos in the "mov" instruction
3534 opcode, mask and/or operand fields.
3536 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3538 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3539 m68851 wasn't reset.
3541 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3543 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3544 all opcodes. Very rough cut at operands for all opcodes.
3546 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3549 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3551 * mn10200-opc.c, mn10300-opc.c: New files.
3552 * mn10200-dis.c, mn10300-dis.c: New files.
3553 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3554 * disassemble.c: Break mn10x00 support into 10200 and 10300
3556 * configure.in: Likewise.
3557 * configure: Rebuilt.
3559 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3561 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3563 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3565 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3567 * disassemble (ARCH_mn10x00): Define.
3568 (disassembler): Handle bfd_arch_mn10x00.
3569 * configure.in: Recognize bfd_mn10x00_arch.
3570 * configure: Rebuilt.
3572 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3574 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3575 accordingly. Don't declare functions using op_rtn.
3577 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3579 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3580 params to be more standard.
3581 * (disassemble): Print absolute addresses and symbolic names for
3582 branch and jump targets.
3583 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3585 * (v850_opcodes): Add breakpoint insn.
3587 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3589 * m68k-opc.c: Move the fmovemx data register cases before the
3590 other cases, so that they get recognized before the data register
3591 does gets treated as a degenerate register list.
3593 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3595 * mips-opc.c: Add a case for "div" and "divu" with two registers
3596 and a destination of $0.
3598 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3600 * mips-dis.c (print_insn_arg): Add prototype.
3601 (_print_insn_mips): Ditto.
3603 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3605 * mips-dis.c (print_insn_arg): Print condition code registers as
3608 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3610 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3612 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3614 * v850-dis.c (disassemble): Make static. Provide prototype.
3616 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3618 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3621 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3623 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3624 ']' characters into the output stream.
3625 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3626 Add "memop" field to all opcodes (for the disassembler).
3627 Reorder opcodes so that "nop" comes before "mov" and "jr"
3628 comes before "jarl".
3630 * v850-dis.c (print_insn_v850): Fix typo in last change.
3632 * v850-dis.c (print_insn_v850): Properly handle disassembling
3633 a two byte insn at the end of a memory region when the memory
3634 region's size is only two byte aligned.
3636 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3638 * v850-dis.c (v850_reg_names): Define.
3639 (v850_sreg_names, v850_cc_names): Likewise.
3640 (disassemble): Very rough cut at printing operands (unformatted).
3642 * v850-opc.c (BOP_MASK): Fix.
3643 (v850_opcodes): Fix mask for jarl and jr.
3645 * v850-dis.c: New file. Skeleton for disassembler support.
3646 * Makefile.in Remove v850 references, they're not needed here.
3647 * configure.in: Add v850-dis.o when building v850 toolchains.
3648 * configure: Rebuilt.
3649 * disassemble.c (disassembler): Call v850 disassembler.
3651 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3652 (insert_d8_6, extract_d8_6): New functions.
3653 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3654 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3656 (IF4A, IF4B): Use "D7" instead of "D7S".
3657 (IF4C, IF4D): Use "D8_7" instead of "D8".
3658 (IF4E, IF4F): New. Use "D8_6".
3659 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3660 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3662 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3663 (v850_operands): Change D16 to D16_15, use special insert/extract
3664 routines. New new D16 that uses the generic insert/extract code.
3665 (IF7A, IF7B): Use D16_15.
3666 (IF7C, IF7D): New. Use D16.
3667 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3669 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3670 message. Issue an error if the branch offset is odd.
3672 * v850-opc.c: Add notes about needing special insert/extract
3673 for all the load/store insns, except "ld.b" and "st.b".
3675 * v850-opc.c (insert_d22, extract_d22): New functions.
3676 (v850_operands): Use insert_d22 and extract_d22 for
3678 (insert_d9): Fix range check.
3680 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3682 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3683 and set bits field to D9 and D22 operands.
3685 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3687 * v850-opc.c (v850_operands): Define SR2 operand.
3688 (v850_opcodes): "ldsr" uses R1,SR2.
3690 * v850-opc.c (v850_opcodes): Fix opcode specs for
3691 sld.w, sst.b, sst.h, sst.w, and nop.
3693 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3695 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3696 end of the opcode table.
3698 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3700 * d10v-opc.c (pre_defined_registers): Added register pairs,
3701 "r0-r1", "r2-r3", etc.
3703 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3705 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3706 Create I16U for an unsigned 16bit mmediate operand.
3707 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3709 * v850-opc.c (v850_operands): Define EP operand.
3710 (IF4A, IF4B, IF4C, IF4D): Use EP.
3712 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3713 with immediate operand, "movhi". Tweak "ldsr".
3715 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3716 correct. Get sld.[bhw] and sst.[bhw] closer.
3718 * v850-opc.c (v850_operands): "not" is a two byte insn
3720 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3722 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3724 * v850-opc.c (two): Get order of words correct.
3726 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3728 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3729 register source and destination operands.
3730 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3732 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3733 same thinko in "trap" opcode.
3735 * v850-opc.c (v850_opcodes): Add initializer for size field
3738 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3739 Add D8 for 8-bit unsigned field in short load/store insns.
3740 (IF4A, IF4D): These both need two registers.
3741 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3742 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3743 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3744 for "ldsr" and "stsr".
3745 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3748 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3749 short store word (sst.w).
3751 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3753 * v850-opc.c (v850_operands): Added insert and extract fields,
3754 pointers to functions that handle unusual operand encodings.
3756 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3758 * v850-opc.c (v850_opcodes): Enable "trap".
3760 * v850-opc.c (v850_opcodes): Fix order of displacement
3761 and register for "set1", "clr1", "not1", and "tst1".
3763 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3765 * v850-opc.c (v850_operands): Add "B3" support.
3766 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3769 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3771 * v850-opc.c: Close unterminated comment.
3773 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3775 * v850-opc.c (v850_operands): Add flags field.
3776 (v850_opcodes): add move opcodes.
3778 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3780 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3781 * configure: (bfd_v850v_arch) Add new case.
3782 * configure.in: (bfd_v850_arch) Add new case.
3783 * v850-opc.c: New file.
3785 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3787 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3789 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3791 * d10v-opc.c: Add additional information to the opcode
3792 table to help determinine which instructions can be done
3795 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3797 * mpw-make.sed: Update editing of include pathnames to be
3800 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3802 * arm-opc.h: Added "bx" instruction definition.
3804 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3806 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3808 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3810 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3812 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3814 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3816 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3818 * makefile.vms: Update for alpha-opc changes.
3820 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3822 * i386-dis.c (print_insn_i386): Actually return the correct value.
3823 (ONE, OP_ONE): #ifdef out; not used.
3825 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3827 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3828 Changed subi operand type to treat 0 as 16.
3830 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3832 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3835 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3837 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3838 memory transfer instructions. Add new format string entries %h and %s.
3839 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3842 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3844 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3845 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3847 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3849 * alpha-dis.c (print_insn_alpha_osf): Remove.
3850 (print_insn_alpha_vms): Remove.
3851 (print_insn_alpha): Make globally visible. Chose the register
3852 names based on info->flavour.
3853 * disassemble.c: Always return print_insn_alpha for the alpha.
3855 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3857 * d10v-dis.c (dis_long): Handle unknown opcodes.
3859 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3861 * d10v-opc.c: Changes to support signed and unsigned numbers.
3862 All instructions with the same name that have long and short forms
3863 now end in ".l" or ".s". Divs added.
3864 * d10v-dis.c: Changes to support signed and unsigned numbers.
3866 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3868 * d10v-dis.c: Change all functions to use info->print_address_func.
3870 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3872 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3873 move ccr/sr insns more strict so that the disassembler only
3874 selects them when the addressing mode is data register.
3876 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3877 * d10v-opc.c (pre_defined_registers): Declare.
3878 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3879 to pick a better name for the registers.
3881 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3883 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3884 operands for fexpand and fpmerge. From Christian Kuehnke
3885 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3887 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3889 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3890 print routine. Take new regnames and cpumask arguments.
3891 Kill the environment variable nonsense.
3892 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3893 (print_insn_alpha_vms): New function. Do VMS style regnames.
3894 * disassemble.c (disassembler): Test bfd flavour to pick
3895 between OSF and VMS routines. Default to OSF.
3897 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3899 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3900 * configure: Rebuild.
3901 * Makefile.in (install): Use @INSTALL_SHLIB@.
3903 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3905 * configure: (bfd_d10v_arch) Add new case.
3906 * configure.in: (bfd_d10v_arch) Add new case.
3907 * d10v-dis.c: New file.
3908 * d10v-opc.c: New file.
3909 * disassemble.c (disassembler) Add entry for d10v.
3911 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3913 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3914 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3916 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3918 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3919 distinguish between variants of the instruction set.
3920 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3921 distinguish between variants of the instruction set.
3923 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3925 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3926 the 8086 instruction set.
3927 * i386-dis.c: General cleanups. Make most things static. Add
3928 prototypes. Get rid of static variables aflags and dflags. Pass
3929 them as args (to almost everything).
3931 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3933 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3935 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3937 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3938 if the next arg is marked with SRC_IN_DST. Gross.
3940 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3941 we're looking for and find EXR.
3943 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3944 if we're looking for KBIT and we don't find it.
3946 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3949 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3950 3bit immediate operands.
3952 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3954 * Released binutils 2.7.
3956 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3957 <kkaempf@progis.ac-net.de>.
3959 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3961 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3963 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3965 * sparc-dis.c (print_insn_sparclite): New routine to print
3966 sparclite instructions.
3968 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3970 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3972 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3974 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3975 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3976 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3978 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3980 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3981 Use autoconf-set values.
3982 (docdir, oldincludedir): Removed.
3983 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3985 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3987 * alpha-opc.c: New file.
3988 * alpha-opc.h: Remove.
3989 * alpha-dis.c: Complete rewrite to use new opcode table.
3990 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3991 * configure: Rebuild with autoconf 2.10.
3992 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3993 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3995 (alpha-opc.o): New target.
3997 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3999 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
4000 Set imm_added_to_rs1 even if the source and destination register
4003 * sparc-opc.c: Add some two operand forms of the wr instruction.
4005 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
4007 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
4010 * disassemble.c (disassembler): Handle H8/S.
4011 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
4013 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
4015 * sparc-opc.c: Add beq/teq as aliases for be/te.
4017 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
4018 <sergei@msil.sps.mot.com>.
4020 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
4022 * makefile.vms: New file.
4024 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
4026 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
4028 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
4031 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
4033 * i386-dis.c (OP_OFF): Call append_prefix.
4035 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4037 * ppc-opc.c (instruction encoding macros): Add explicit casts to
4038 unsigned long to silence a warning from the Solaris PowerPC
4041 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
4043 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
4045 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
4047 * sparc-dis.c (X_IMM,X_SIMM): New macros.
4049 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
4050 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
4051 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
4052 cpush, cpusha, cpull sparclet insns.
4054 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
4056 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
4058 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
4060 * sparc-opc.c: Set F_FBR on floating point branch instructions.
4061 Set F_FLOAT on other floating point instructions.
4063 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4065 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
4067 (powerpc_opcodes): Add 860/821 specific SPRs.
4069 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
4071 * configure.in: Permit --enable-shared to specify a list of
4072 directories. Set and substitute BFD_PICLIST.
4073 * configure: Rebuild.
4074 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
4075 uses. Set to @BFD_PICLIST@.
4077 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
4079 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4080 not "abs", which may be needed for the absolute in something
4081 like btst #0,@10:8. Print L_3 immediates separately from other
4082 immediates. Change ABSMOV reference to ABS8MEM.
4084 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4086 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4087 (current_arch_mask): New static global.
4088 (compute_arch_mask): New static function.
4089 (print_insn_sparc): Delete sparc_v9_p. New static local
4090 current_mach. Resort opcode table if current_mach changes.
4091 Generalize "insn not supported" test.
4092 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4093 Delete test for v9/!v9.
4094 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4096 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4097 (brfcx): Renamed to FBRX.
4098 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4099 coprocessor mnemonics are not supported on the sparclet).
4100 (condf): Renamed to CONDF.
4101 (SLCBCC2): Delete F_ALIAS flag.
4103 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4105 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4106 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4108 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4110 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4111 that the shared library version number is set correctly.
4113 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4115 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4116 Miles Bader <miles@gnu.ai.mit.edu>.
4117 * configure: Rebuild.
4119 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4121 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4124 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4126 * configure: Rebuild with autoconf 2.8.
4128 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4130 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4131 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4133 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4135 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4136 since they appear as targets in Makefile.in.
4137 * configure: Rebuild.
4139 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4141 * mpw-make.sed: Edit out shared library support bits.
4143 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4145 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4146 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4147 (sparc_opcodes): Add sparclet insns.
4148 (sparclet_cpreg_table): New static local.
4149 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4150 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4152 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4154 * i386-dis.c (index16): New static variable.
4155 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4157 (OP_indirE): Return result of OP_E.
4158 (OP_E): Check for 16 bit addressing mode, and disassemble
4159 correctly. Optimised 32 bit case a little. Don't print
4160 "(base,index,scale)" when sib specifies only an offset.
4162 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4164 * configure.in: Set and substitute SHLIB_DEP.
4165 * configure: Rebuild.
4166 * Makefile.in (SHLIB_DEP): New variable.
4167 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4168 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4169 COMMON_SHLIB, add them to piclist with appropriate modifications.
4170 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4171 here: just use piclist.
4173 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4175 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4176 (print_insn_sparc): Rewrite v9/not-v9 tests.
4177 (compare_opcodes): Likewise.
4178 * sparc-opc.c (MASK_<ARCH>): Define.
4179 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4180 (sparclet,v6notv9): Define.
4181 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4182 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4184 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4186 * configure.in: Call AC_PROG_CC before configure.host.
4187 * configure: Rebuild.
4189 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4191 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4193 * i386-dis.c (onebyte_has_modrm): New static array.
4194 (twobyte_has_modrm): New static array.
4195 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4197 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4199 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4202 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4204 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4207 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4209 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4210 m68010up, not just m68020up | cpu32.
4212 * Makefile.in (SONAME): New variable.
4213 ($(SHLINK)): Make a link to the transformed name, as well.
4214 (stamp-tshlink): New target.
4215 (install): Skip stamp-tshlink during install.
4217 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4219 * configure.in: Call AC_ARG_PROGRAM.
4220 * configure: Rebuild.
4221 * Makefile.in (program_transform_name): New variable.
4222 (install): Transform library name before installing it.
4224 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4226 * i960-dis.c (mem): Add HX dcinva instruction.
4228 Support for building as a shared library, based on patches from
4229 Alan Modra <alan@spri.levels.unisa.edu.au>:
4230 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4231 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4232 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4233 * configure: Rebuild.
4234 * Makefile.in (ALLLIBS): New variable.
4235 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4236 (COMMON_SHLIB, SHLINK): New variables.
4237 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4238 (STAGESTUFF): Remove variable.
4239 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4240 (stamp-piclist, piclist): New targets.
4241 ($(SHLIB), $(SHLINK)): New targets.
4242 ($(OFILES)): Depend upon stamp-picdir.
4243 (disassemble.o): Build twice if PICFLAG is set.
4244 (MOSTLYCLEAN): Add pic/*.o.
4245 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4246 (distclean): Remove pic and stamp-picdir.
4247 (install): Install shared libraries.
4248 (stamp-picdir): New target.
4250 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4252 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4253 Print unknown instruction as "unknown", rather than in hex.
4255 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4257 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4259 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4261 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4263 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4265 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4266 when necessary. From Ulrich Drepper
4267 <drepper@myware.rz.uni-karlsruhe.de>.
4269 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4271 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4272 sparc_num_opcodes. Update architecture enum values.
4273 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4274 (sparc_opcode_lookup_arch): New function.
4275 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4276 (sparc_opcodes): Add v9a shutdown insn.
4278 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4280 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4281 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4283 (print_insn_sparc64): Deleted.
4284 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4287 * sparc-opc.c (architecture_pname): Add v9a.
4289 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4291 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4292 incorrectly defined as 0x16 when it should be 0x15.
4293 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4294 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4295 excb (exception barrier) which is defined in the Alpha
4296 Architecture Handbook version 2.
4297 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4298 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4299 disassembled as or, for example.
4301 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4303 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4304 (_print_insn_mips): Change i from int to unsigned int.
4306 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4308 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4309 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4311 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4313 * i386-dis.c: Added Pentium Pro instructions.
4315 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4317 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4320 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4322 * sh-opc.h (sh_nibble_type): Added REG_B.
4323 (sh_arg_type): Added A_REG_B.
4324 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4326 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4328 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4330 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4332 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4334 * Makefile.in (distclean): Remove stamp-h. From Ronald
4335 F. Guilmette <rfg@monkeys.com>.
4337 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4339 From David Mosberger-Tang <davidm@azstarnet.com>:
4340 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4343 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4345 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4346 (sh_table): Added many SH3 opcodes.
4347 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4349 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4351 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4352 (subco,subco.): Mark this PPC, not PPCCOM.
4354 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4356 * configure: Rebuild with autoconf 2.7.
4358 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4360 * configure: Rebuild with autoconf 2.6.
4362 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4364 * configure.in: Sort list of architectures. Accept but do nothing
4365 for alliant, convex, pyramid, romp, and tahoe.
4367 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4369 * a29k-dis.c (print_special): Change num to unsigned int.
4371 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4373 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4376 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4378 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4379 * configure: Rebuilt.
4381 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4383 * configure.in: Add case for bfd_i860_arch.
4384 * configure: Rebuild.
4386 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4388 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4389 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4390 (NEXTDOUBLE): Likewise.
4391 (print_insn_m68k): Don't match fmoveml if there is more than one
4392 register in the list.
4393 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4395 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4397 * m68k-opc.c: Use #W rather than #w.
4398 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4400 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4402 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4403 and likewise for all the dbxx opcodes.
4405 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4407 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4409 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4411 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4412 the VR4100 specific instructions to the mips_opcodes structure.
4414 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4416 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4417 ugly Metrowerks bug in CW6, is fixed in CW7.
4419 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4421 * ppc-opc.c (whole file): Add flags for common/any support.
4423 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4425 * Makefile.in (BISON): Remove macro.
4426 (FLAGS_TO_PASS): Remove BISON.
4428 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4430 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4432 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4433 instructions that take no args by looking at the match mask.
4434 (print_insn_arg): Always print "%" before register names.
4435 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4436 [case '_']: Don't print "@#" before address.
4437 [case 'J']: Use "%s" as format string, not register name.
4438 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4440 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4442 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4445 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4447 From David Mosberger-Tang <davidm@azstarnet.com>
4449 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4450 (alpha_insn_set): added definitions for VAX floating point
4451 instructions (Unix compilers don't generate these, but handcoded
4452 assembly might still use them).
4454 * alpha-dis.c (print_insn_alpha): added support for disassembling
4455 the miscellaneous instructions in the Alpha instruction set.
4457 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4459 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4460 no longer create sysdep.h, sed ppc-opc.c to work around a
4461 serious Metrowerks C bug.
4462 * mpw-make.in: Remove.
4463 * mpw-make.sed: New file, used by mpw-configure to edit
4464 Makefile.in into an MPW makefile.
4466 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4468 * Makefile.in (maintainer-clean): New synonym for realclean.
4470 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4472 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4473 which use '0', '1', and '2' instead. Specify the proper size for
4474 a pmove immediate operand. Correct the pmovefd patterns to be
4475 moves to a register, not from a register.
4476 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4478 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4480 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4481 %psr, %wim, %tbr as F_NOTV9.
4483 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4485 * Makefile.in (Makefile): Just rebuild Makefile when running
4487 (config.h, stamp-h): New targets.
4488 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4489 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4490 rebuilding config.h.
4491 * configure: Rebuild.
4493 * mips-opc.c: Change unaligned loads and stores with "t,A"
4494 operands to use "t,A(b)".
4496 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4498 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4500 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4502 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4503 until 3 instead of until 2.
4505 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4507 * Makefile.in (ALL_CFLAGS): Define.
4508 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4509 (MOSTLYCLEAN): Add config.log.
4510 (distclean): Don't remove config.log.
4511 * configure.in: Substitute HDEFINES.
4512 * configure: Rebuild.
4514 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4516 * sh-opc.h (sh_arg_type): Add F_FR0.
4517 (sh_table, case fmac): Add F_FR0 as first argument.
4519 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4521 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4523 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4525 * sparc-dis.c: Remove all references to NO_V9.
4527 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4529 * aclocal.m4: Just include ../bfd/aclocal.m4.
4530 * configure: Rebuild.
4532 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4534 * sparc-dis.c (X_DISP19): Define.
4535 (print_insn, case 'G'): Use it.
4536 (print_insn, case 'L'): Sign extend displacement.
4538 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4540 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4541 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4542 host_makefile_frag or frags.
4543 * aclocal.m4: New file.
4544 * configure: Rebuild.
4545 * Makefile.in (INSTALL): Set to @INSTALL@.
4546 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4547 (INSTALL_DATA): Set to @INSTALL_DATA@.
4549 (AR_FLAGS): Set to rc rather than qc.
4550 (CC): Define as @CC@.
4551 (CFLAGS): Set to @CFLAGS@.
4552 (@host_makefile_frag@): Remove.
4553 (config.status): Remove dependency upon @frags@.
4555 * configure.in: ../bfd/config.bfd now just sets shell variables.
4556 Use them rather than looking through target Makefile fragments.
4557 * configure: Rebuild.
4559 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4561 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4563 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4565 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4566 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4569 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4570 (lookup_{name,value}): New functions.
4571 (prefetch_table): New static local.
4572 (sparc_{encode,decode}_prefetch): New functions.
4573 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4575 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4577 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4580 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4582 * sh-dis.c: Correct comment on first line of file.
4584 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4586 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4588 * sparc-opc.c (asi, membar): New static locals.
4589 (sparc_{encode,decode}_{asi,membar}): New functions.
4590 (sparc_opcodes, membar insn): Fix.
4591 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4592 Support decoding of membar masks.
4595 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4597 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4599 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4601 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4602 and likewise for the other branches. Add bhs as an alias for bcc,
4603 and likewise for the size variants. Add dbhs as an alias for
4606 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4608 * sh-opc.h (FP sts instructions): Update to match reality.
4610 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4612 * m68k-dis.c: (fpcr_names): Add % before all register names.
4613 (reg_names): Likewise.
4614 (print_insn_arg): Don't explicitly print % before register names.
4615 Add % before register names in static array names. In case 'r',
4616 print data registers as `@(Dn)', not `Dn@'. When printing a
4617 memory address, don't print @# before it.
4618 (print_indexed): Change base_disp and outer_disp from int to
4619 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4620 syntax. Sign extend 8 byte displacement correctly.
4621 (print_base): Print using MIT syntax. Print zpc when appropriate.
4622 Change parameter disp from int to bfd_vma.
4624 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4627 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4629 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4630 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4631 * sh-opc.h (sh_arg_type): Add new operand types.
4632 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4634 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4636 * Makefile.in (distclean): Remove generated file config.h.
4638 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4640 * Makefile.in (distclean): Remove generated file config.h.
4642 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4644 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4646 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4648 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4649 rather than numopcodes. Use m68k_opcodes rather than removed
4650 opcode function. Don't check F_ALIAS.
4651 (print_insn_arg): Change first parameter to be const char *.
4652 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4653 (m68k-opc.o): New target.
4654 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4655 * configure: Rebuild.
4657 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4659 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4660 (opcode_bits, opcode_hash_table): New variables.
4661 (opcodes_initialized): Renamed from opcodes_sorted.
4662 (build_hash_table): New function.
4663 (is_delayed_branch): Use hash table.
4664 (print_insn): Renamed from print_insn_sparc, made static.
4665 Build and use hash table. If !sparc64, ignore sparc64 insns,
4666 and vice-versa if sparc64.
4667 (print_insn_sparc, print_insn_sparc64): New functions.
4668 (compare_opcodes): Move sparc64 opcodes to end.
4669 Print commutative insns with constant second.
4670 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4672 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4674 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4675 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4676 avoids printing a delay slot in a delay slot.
4677 * sh-opc.h (sh_table): Fully bracket last entry.
4679 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4681 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4683 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4685 * configure.in: Get host_makefile_frag from ${srcdir}.
4687 * configure.in: Autoconfiscated. Check for string[s].h. Create
4688 config.h from config.in. Don't set up sysdep.h link.
4689 * sysdep.h: New file.
4690 * configure, config.in: New files, generated from configure.in.
4691 * Makefile.in: Updated to be processed autoconf-style.
4692 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4693 (Makefile): Depend on config.status.
4694 (config.status): New rule.
4695 * configure.bat: Update Makefile substitutions.
4697 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4699 * mips-opc.c (L1): Define.
4700 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4701 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4704 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4706 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4707 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4708 have multiple add units but only a single logical unit.
4710 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4711 shifted by 18, without any insertion or extraction function.
4712 (insert_cr, extract_cr): Remove.
4714 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4716 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4719 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4721 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4722 * sh-opc.h: Add copyright.
4724 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4726 * Makefile.in (crunch-m68k): Delete extra target accidentally
4727 checked in a while ago.
4729 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4731 * sh-opc.h (sh_table): Add SH3 support.
4733 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4735 * sh-opc.h: Added bsrf and braf.
4737 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4739 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4740 bogus [ls]fm{ea,fd} patterns.
4742 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4743 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4744 initialize it from memory. Make function static.
4745 (print_insn_{big,little}_arm): New functions.
4746 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4747 the correct endianness.
4749 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4751 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4754 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4756 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4757 17th, so that it builds again using GCC as the compiler.
4759 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4761 * mips-dis.c (print_insn_little_mips): Cast return value from
4762 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4763 expects an unsigned long, and that might be fewer words of
4764 argument storage (e.g., if bfd_vma is long long on a 32-bit
4766 (print_insn_big_mips): Likewise with bfd_getb32 value.
4767 (_print_insn_mips): Now static.
4769 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4771 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4772 gcc memory hog problem with initializer is fixed.
4774 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4776 Merge in support for Mac MPW as a host.
4777 (Old change descriptions retained for informational value.)
4779 * mpw-config.in (archname): Compute from the config.
4780 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4782 * mpw-config.in (target_arch): Compute from canonical target.
4783 (m68k, mips, powerpc, sparc): Add architectures.
4784 * mpw-make.in (disassemble.c.o): Add.
4785 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4787 * mpw-config.in (BFD_MACHINES): Set to a default value.
4788 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4790 * mpw-make.in (CSEARCH): Add extra-include to search path.
4792 * mpw-config.in (varargs.h): Don't create.
4793 (sysdep.h): Create using forward-include.
4794 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4796 * mpw-config.in: New file, MPW version of configure.in.
4797 * mpw-make.in: New file, MPW version of Makefile.in.
4799 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4801 * alpha-dis.c (print_insn_alpha): Put empty statement after
4804 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4806 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4807 (low_sign_extend): Likewise.
4808 (get_field): Delete unused function.
4809 (set_field, deposit_14, deposit_21): Likewise.
4811 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4813 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4816 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4818 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4820 * alpha-opc.h (OSF_ASMCODE): define
4821 print pal-code names as defined in App C of the
4822 Alpha Architecture Reference Manual
4824 * alpha-dis.c: cleaned up output
4825 print stylized code forms as defined in App A.4.3 of the
4826 Alpha Architecture Reference Manual
4828 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4830 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4832 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4835 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4837 * m68k-dis.c (opcode): New function. Returns address of opcode
4838 table entry given index, even if the opcode table was split to
4839 work around gcc bugs.
4840 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4842 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4843 (reg_names): Now const.
4844 (print_insn_arg): Arrays cacheFieldName and names now const.
4845 (print_indexed): Array scales now const.
4847 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4849 * ppc-opc.c: Sort recently added instructions by minor opcode
4850 number within major opcode number.
4852 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4854 * hppa-dis.c: Include libhppa.h.
4856 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4858 * mips-opc.c: Change dli to use M_DLI, and add dla.
4860 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4862 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4864 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4866 * mips-opc.c: Add r4650 mul instruction.
4868 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4870 * mips-opc.c: Add uld and usd macros for unaligned double load and
4873 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4875 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4876 mfdcr, mtdcr, icbt, iccci.
4878 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4880 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4881 signed char fields to shorts, more portable.
4883 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4885 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4886 char fields as signed chars, since they may have negative values.
4888 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4890 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4891 (mycroft@netbsd.org).
4893 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4895 From "Logg, Ed" <elogg@ea.com>:
4896 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4897 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4900 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4902 * ppc-opc.c: Changes based on patch from David Edelsohn
4903 <edelsohn@mhpcc.edu>.
4904 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4907 (insert_tbr): New static function.
4908 (extract_tbr): New static function.
4909 (XFXFXM_MASK, XFXM): Define.
4910 (XSPRBAT_MASK, XSPRG_MASK): Define.
4911 (powerpc_opcodes): Add instructions to access special registers by
4912 name. Add mtcr and mftbu.
4914 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4916 * mips-opc.c (P3): Define.
4917 (mips_opcodes): Add mad and madu.
4919 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4921 * configure.in: Add W65 support.
4922 * disassemble.c: Likewise.
4923 * w65-opc.h, w65-dis.c: New files.
4925 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4927 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4930 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4932 * mips-opc.c: Add dli as a synonym for li.
4934 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4936 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4937 print something for reserved opcode values, even if it won't
4940 * mips-dis.c (_print_insn_mips): When initializing, shift right
4941 and mask, to avoid sign extension problems on the Alpha.
4943 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4946 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4948 * sh-opc.h (mov.l gbr): Get direction right.
4949 * sh-dis.c (print_insn_shx): New function.
4950 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4951 print opcodes with right byte order.
4953 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4955 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4956 to avoid conflicts with getopt.
4958 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4960 * hppa-dis.c (print_insn_hppa): Read the instruction using
4961 bfd_getb32, so that it works on a little endian or 64 bit host.
4962 Remove unused local variable op.
4964 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4966 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4967 addu does not work correctly if -mips3.
4969 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4971 * a29k-dis.c (print_special): Add special register names defined
4972 on 29030, 29040 and 29050.
4973 (print_insn): Handle new operand type 'I'.
4975 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4977 * Makefile.in (INSTALL): Use top level install.sh script.
4979 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4981 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4982 that it works on a little endian host.
4984 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4986 * configure.in: Use ${config_shell} when running config.bfd.
4988 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4990 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4992 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4994 * a29k-dis.c (print_insn): Print the opcode.
4996 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4998 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
5000 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
5002 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
5004 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5006 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
5007 which store a value into memory.
5009 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
5011 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
5012 * arm-dis.c, arm-opc.h: New files.
5014 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
5016 * Makefile.in (ns32k-dis.o): Add dependency.
5017 * ns32k-dis.c (print_insn_arg): Declare initialized local as
5018 string, not as array of chars.
5020 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5022 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
5024 * sparc-opc.c: Added sparclite extended FP operations, and
5025 versions of v9 impdep* instructions permitting specification of
5028 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5030 * i960-dis.c (reg_names): Now const.
5031 (struct sparse_tabent): New type, copied from array type in mem
5033 (ctrl): Local static array ctrl_tab now const.
5034 (cobr): Local static array cobr_tab now const.
5035 (mem): Local variables reg1, reg2, reg3 now point to const. Local
5036 static variable mem_tab no longer explicitly initialized. Changed
5037 mem_init to const array of struct sparse_tabent.
5038 (reg): Local static variable reg_tab no longer explicitly
5039 initialized. Changed reg_init to const array of struct
5041 (ea): Local static array scale_tab now const.
5043 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
5046 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
5048 * configure.bat: the disassember needs to be enabled for
5049 "objdump -d" to work in djgpp.
5051 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5053 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
5054 (invalid_float): Enabled general version, doesn't require running
5055 on ns32k host. Changed to take char* argument, and test for
5056 explicitly specified sizes, instead of using sizeof() on host CPU
5058 (INVALID_FLOAT): Cast first argument.
5059 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
5060 list_P032, list_M032): Now const.
5061 (optlist, list_search): Made appropriate arguments now point to
5063 (print_insn_arg): Changed static array of one-character-string
5064 pointers into a static const array of characters; fixed sprintf
5065 statement accordingly.
5067 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
5069 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
5070 from distribution. A ns32k-dis.c from a previous distribution has
5071 been brought up to date and supports the new interface.
5073 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5075 * configure.in: add bfd_ns32k_arch target support.
5077 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5078 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5080 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
5082 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5085 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5087 * h8300-dis.c, mips-dis.c: Don't use true and false.
5089 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5091 * configure.in: Change --with-targets to --enable-targets.
5093 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5095 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5096 opcodes to the first instruction with that opcode, to speed
5097 disassembly of large files. From ralphc@pyramid.com (Ralph
5100 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5102 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5104 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5106 * configure.bat: update to latest makefile.in
5108 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5110 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5111 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5112 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5113 slot insn is in a delay slot.
5114 * z8k-opc.h: (resflg): Fix patterns.
5115 * h8500-opc.h Fix CR insn patterns.
5117 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5119 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5120 "cmpl" before POWER versions, so that gas -many uses them.
5122 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5124 * disassemble.c: New file.
5125 * Makefile.in (OFILES): Add disassemble.o.
5126 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5127 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5128 binutils/configure.in.
5130 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5131 opcode being examined.
5133 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5135 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5136 (insert_ral, insert_ram, insert_ras): New functions.
5137 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5138 RAS for store with update.
5140 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5142 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5143 (edelsohn@npac.syr.edu).
5145 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5147 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5150 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5152 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5154 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5156 * ppc-opc.c (powerpc_operands): The signedp field has been
5157 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5158 instead. Add new operand SISIGNOPT.
5159 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5160 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5161 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5164 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5166 * i386-dis.c (struct private): Renamed to dis_private. `private'
5167 is a reserved word for dynix cc.
5169 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5171 * configure.in: Change error message to refer to bfd/config.bfd
5172 rather than bfd/configure.in.
5174 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5176 * ppc-opc.c: Define POWER2 as short alias flag.
5177 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5180 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5182 * i960-dis.c (print_insn_i960): Don't read a second word for
5183 opcodes 0, 1, 2 and 3.
5185 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5187 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5189 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5191 * m68881-ext.c: Removed; no longer used.
5192 * Makefile.in: Changed accordingly.
5194 * m68k-dis.c (ext_format_68881): Don't declare.
5195 (print_insn_m68k): If an instruction uses place 'i', it uses at
5196 least four fixed bytes.
5197 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5198 extended float, convert to double using floatformat_to_double, not
5199 ieee_extended_to_double, and fetch the data before converting it.
5201 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5203 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5204 davidj@ICSI.Berkeley.EDU (David Johnson).
5206 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5208 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5209 PowerPC uses bdnz[l][a].
5211 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5213 * dis-buf.c, i386-dis.c: Include sysdep.h.
5215 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5217 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5219 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5220 by Motorola PowerPC 601 with PPC_OPCODE_601.
5221 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5222 Disassemble Motorola PowerPC 601 instructions as well as normal
5223 PowerPC instructions.
5225 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5227 * i960-dis.c (reg, mem): Just use a static array instead of
5230 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5232 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5233 condition name index if this is for a negated condition.
5235 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5236 Floating point format for 'H' operand is backwards from normal
5237 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5238 operands (fmpyadd and fmpysub), handle bizarre register
5239 translation correctly for single precision format.
5241 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5242 or 'I' operands if the next format specifier is 'M' (fcmp
5243 condition completer).
5245 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5247 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5248 single number giving a bitmask for the MB and ME fields of an M
5249 form instruction. Change NB to accept 32, and turn it into 0;
5250 also turn 0 into 32 when disassembling. Seperated SH from NB.
5251 (insert_mbe, extract_mbe): New functions.
5252 (insert_nb, extract_nb): New functions.
5253 (SC_MASK): Mask out SA and LK bits.
5254 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5255 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5256 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5257 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5258 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5259 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5260 (powerpc_macros): Define table of macro definitions.
5261 (powerpc_num_macros): Define.
5263 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5264 if PPC_OPERAND_NEXT is set.
5266 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5268 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5269 char. Retrieve contents using bfd_getl32 instead of shifting.
5271 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5273 * ppc-opc.c: New file. Opcode table for PowerPC, including
5274 opcodes for POWER (RS/6000).
5275 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5276 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5277 (CFILES): Add ppc-dis.c.
5278 (ppc-dis.o, ppc-opc.o): New targets.
5279 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5281 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5283 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5284 No space before 'u', 'f', or 'N'.
5286 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5288 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5289 farther than we should.
5291 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5293 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5295 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5297 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5299 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5300 needs it, to prevent reading past the end of a section.
5302 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5304 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5305 Removed t,A case for la; always use t,A(b) case.
5307 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5309 From Ted Lemen <mellon@pepper.ncd.com>
5310 * mips-dis.c (print_insn_arg): Handle 'k'.
5311 * mips-opc.c: Make cache use k, not t.
5313 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5315 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5316 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5317 FLOAT_FORMAT_CODE to put out floating point register names.
5319 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5321 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5323 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5325 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5327 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5329 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5330 larger than 32. Moved dsxx32 variants first for disassembler.
5332 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5334 * z8kgen.c, z8k-opc.h: Add full lda information.
5336 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5338 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5339 movb instructions. Any necessary space will be emitted by
5340 the code to handle nullification completers.
5342 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5344 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5346 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5348 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5349 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5351 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5353 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5355 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5357 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5358 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5360 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5362 * m88k-dis.c (m88kdis): comment change. Remove space after
5364 (printop): handle new arg types DEC and XREG for m88110.
5366 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5368 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5369 type for absolute branch addresses. Delete special
5370 "ble" and "be" code in 'W' operand code.
5372 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5374 * mips-opc.c: Set hazard information correctly for branch
5375 likely instructions.
5377 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5379 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5380 info->fprintf_func for printing and info->print_address_func for
5383 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5385 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5387 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5389 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5390 Corrected second case of "b" for disassembler.
5392 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5394 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5395 to BFD swapping routines to correspond to BFD name changes.
5397 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5399 * mips-opc.c: Change div machine instruction to be z,s,t rather
5400 than s,t. Change div macro to be d,v,t rather than d,s,t.
5401 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5402 rem and remu which generates only the corresponding div
5403 instruction. This is for compatibility with the MIPS assembler,
5404 which only generates the simple machine instruction when an
5405 explicit destination of $0 is used.
5406 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5408 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5410 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5411 WR_31 hazard for bal, bgezal, bltzal.
5413 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5415 * hppa-dis.c (print_insn_hppa): Use print function
5416 from within the disassemble_info, not fprintf_filtered.
5418 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5420 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5421 Law, law@cs.utah.edu.)
5423 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5425 * mips-opc.c ("absu"): Removed.
5428 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5430 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5431 Changed hazard information to distinguish between memory load
5432 delays and coprocessor load delays.
5434 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5436 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5438 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5440 * configure.in: Don't pass cpu to config.bfd.
5442 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5444 * m88k-dis.c (m88kdis): Make class unsigned.
5446 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5448 * alpha-dis.c (print_insn_alpha): One branch format case was
5449 missing the instruction name.
5451 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5453 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5454 Add the arch-specific auxiliary files.
5455 (OFILES): Remove the arch-specific auxiliary files
5456 and use BFD_MACHINES instead of DIS_LIBS.
5457 * configure.in: Set BFD_MACHINES based on --with-targets option.
5459 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5461 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5464 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5466 * sparc-opc.c: Change CONST to const to deal with gcc
5467 -Dconst=__const -traditional.
5469 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5471 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5472 coprocessor instructions out of #if 0, and made them use new
5475 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5477 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5479 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5481 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5482 instruction, for use by the disassembler.
5484 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5485 hand-coded sign extensions that depended on 32-bit host ints.
5486 FIXME, we still depend on big-endian host bitfield ordering.
5487 (sparc_print_insn): Set the insn_info_valid field, and the
5488 other fields that describe the instruction being printed.
5490 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5492 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5493 `jmp' instead of just one of them.
5495 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5497 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5498 (fput_fp_reg_r): Renamed from fput_reg_r.
5499 (fput_fp_reg): New function.
5500 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5502 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5504 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5506 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5508 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5510 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5511 don't output a space.
5513 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5515 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5517 * mips-opc.c: New file, containing opcode table from
5518 ../include/opcode/mips.h.
5519 * Makefile.in: Add it.
5521 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5523 * m88k-dis.c: New file, moved in from gdb and changed to use the
5524 new dis-asm.h disassembler interface.
5525 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5526 (m88k-dis.o): New target.
5528 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5530 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5531 argument string const char * to correspond to opcode/mips.h.
5533 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5535 * mips-dis.c: Updated to account for name changes in new version
5537 * Makefile.in: Added header file dependencies.
5539 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5541 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5543 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5545 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5546 extend, rather than shifts.
5548 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5550 * Makefile.in: Undo 15 June change.
5552 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5554 * m68k-dis.c (print_insn_arg): Change return value to byte count
5556 * m68k-dis.c: Re-write to detect invalid operands before
5557 printing anything, so we can handle this the same way we
5558 handle invalid opcodes.
5560 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5562 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5564 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5566 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5569 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5571 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5573 * configure.in: Do make sysdep.h link.
5574 * Makefile.in: Search ../include. Don't search ../bfd.
5576 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5578 Changes from Jeff Law, law@cs.utah.edu:
5579 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5580 Do not print a space before the completers specified by
5583 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5585 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5586 defined, since gdb has been fixed.
5588 Changes from Jeff Law, law@cs.utah.edu:
5589 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5590 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5591 be a *disassemble_info, not a *FILE.
5592 * hppa-dis.c: Support 'd', '!', and 'a'.
5593 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5594 * hppa-dis.c: Delete cases which are no longer needed.
5596 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5598 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5600 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5602 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5605 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5607 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5608 * configure.in: No longer need to configure to get sysdep.h.
5610 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5612 * Patches from Jeffrey Law <law@cs.utah.edu>.
5613 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5614 templates for 1.1 FP computational instructions.
5616 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5618 * h8500-dis.c (print_insn_h8500): Address argument is type
5620 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5623 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5624 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5626 * sparc-dis.c (compare_opcodes): Move static declaration to
5629 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5631 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5632 instruction, remove unimp hack from 'l' argument.
5634 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5636 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5639 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5641 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5642 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5645 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5647 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5648 arrays of string pointers to 2-d arrays of chars, to save
5651 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5653 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5654 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5656 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5658 * hppa-dis.c: New file from Utah, adapted to new disassembler
5660 * Makefile.in: Include it.
5662 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5664 * sh-dis.c, sh-opc.h: New files.
5666 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5668 * alpha-dis.c, alpha-opc.h: New files.
5670 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5672 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5675 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5677 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5679 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5681 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5684 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5686 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5687 and double percent signs a few places.
5689 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5691 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5692 Use info->print_address_func not print_address.
5694 * dis-buf.c (generic_print_address): New function.
5696 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5698 * Makefile.in: Add sparc-dis.c.
5699 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5701 Add `add' instruction to the set that get checked
5702 for a preceding `sethi' in order to print an absolute address.
5703 * (print_insn): Disassembly prefers real instructions.
5704 (is_delayed_branch): Speed up.
5705 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5706 Still missing some float ops, and needs testing.
5707 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5708 F_ALIAS. Use printf, not fprintf, when not passing a file
5710 (compare_opcodes): Check that identical instructions have
5711 identical opcodes, complain otherwise.
5714 * Include reg_names.
5716 Use dis-asm.h/read_memory_func interface.
5718 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5720 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5721 deliberately return non-zero to setjmp from longjmp. Otherwise
5722 this code fails to compile.
5724 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5726 * m68k-dis.c: Fix prototype for fetch_arg().
5728 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5730 * dis-buf.c: New file, for new read_memory_func interface.
5731 Makefile.in (OFILES): Include it.
5732 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5733 Use new read_memory_func interface.
5735 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5737 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5738 * h8500-opc.h: Fix couple of opcodes.
5740 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5742 * Makefile.in: add dvi & installcheck targets
5744 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5746 * Makefile.in: Update for h8500-dis.c.
5748 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5750 * h8500-dis.c, h8500-opc.h: New files
5752 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5754 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5755 ../include/dis-asm.h.
5756 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5757 and ../gdb/m68k-pinsn.c).
5758 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5759 and ../gdb/i386-pinsn.c).
5760 * m68881-ext.c: New file. Moved definition of
5761 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5762 * Makefile.in: Adjust for new files.
5763 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5764 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5765 can be dis-assembled.
5767 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5769 * mips-dis.c (print_insn_arg): Now returns void.
5771 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5773 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5774 files that use the macros.
5776 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5778 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5779 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5780 (CFILES): Added mips-dis.c.
5782 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5784 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5785 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5787 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5789 * Makefile.in: Improve *clean rules.
5790 * configure.in: Allow a default host.
5792 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5794 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5795 files include other sysdep files
5797 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5799 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5801 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5803 * configure.in: For host support, use ../bfd/configure.host
5804 so it stays in sync with the ../bfd/hosts database.
5806 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5808 * configure.in: use cpu-vendor-os triple instead of nested cases
5810 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5812 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5813 *always* the wrong one.
5815 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5817 * z8kgen.c: added copyright info
5819 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5821 * z8k-dis.c (unparse_instr): prettier tabs
5822 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5824 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5826 * configure.in: Add ncr* configuration.
5827 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5828 picayune ANSI compilers happy.
5830 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5832 * configure.in (i386): Make i386 and i486 synonymous for now.
5833 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5835 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5837 * Makefile.in (install): Fix typo.
5839 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5841 * Makefile.in (make): Remove obsolete crud.
5842 (sparc-opc.o): Avoid Sun Make VPATH bug.
5844 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5846 * Makefile.in: since there are no SUBDIRS, remove rule and
5847 references of subdir_do.
5849 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5851 * Makefile.in (install): Get the library name right here too.
5852 Don't install bfd.h, since it's unrelated to this library. No
5853 subdirs to recurse into, either.
5854 (CFILES): The source file has a .c suffix, not .o.
5856 * sparc-opc.c: New file, moved from BFD.
5857 * Makefile.in (OFILES): Build it.
5859 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5861 * z8k-dis.c: fixed forward refferences of some declarations.
5863 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5865 * Makefile.in: get the name of the library right
5867 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5869 * z8k-dis.c: knows how to disassemble z8k stuff
5870 * z8k-opc.h: new file full of z8000 opcodes
5874 version-control: never