1 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
3 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
5 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
7 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
8 0; produce error message for shifts of size 32 (or 64 for 64-bit
9 shifts), because the hardware doesn't support them.
12 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
14 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
17 * vu0.h (sqc2): Fix opcode.
19 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
24 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
26 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
27 Change pinfo to use WR_HILO.
31 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
33 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
34 LONG_2, LONG_2b formats to use this new operand.
37 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
39 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
41 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
43 * sparc-dis.c (print_insn_sparc): big endian instruction / little
47 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
49 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
50 and SHORT_B3b formats to use Rb instead of Ra.
52 Add FLAG_MUL16 to MUL2XH opcode.
54 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
55 to existing 1.1.1 parallelisation prohibition procedure.
58 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
60 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
61 * cgen-dis.in (extract_normal): Likewise.
62 * m32r-asm.c,m32r-dis.c: Regenerate.
65 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
67 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
71 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
73 * mips-opc.c (multu1): Add two operand variant for the r5900.
76 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
78 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
79 with a shift count of 0.
82 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
84 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
86 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
88 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
89 (_print_insn_mips): Likewise.
90 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
94 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
96 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
97 (cgen_hw_lookup_by_num): New function.
100 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
103 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
105 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
107 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
109 * sparc-dis.c (print_insn_sparc): Always fetch instructions
110 as big-endian on SPARClite.
113 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
115 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
117 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
122 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
124 * d30v-opc.c (pre_defined_register): Remove alias for r0.
128 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
130 * mips-opc.c (break): Added 20-bit single-operand break
131 instruction for R5900 only.
134 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
136 * po/Make-in (install-info): New target.
138 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
140 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
141 * configure: Rebuild.
143 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
145 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
146 variety of ISA2 instructions to set bottom ten bits of trap code.
148 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
150 * Makefile.am (config.status): Add explicit target so that
151 config.status depends upon bfd/configure.in.
152 * Makefile.in: Rebuild.
154 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
156 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
157 instructions to set bottom ten bits of break code.
158 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
159 for above optional argument.
161 start-sanitize-cygnus
162 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
164 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
165 * m32r-opc.h: Regenerate.
168 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
170 * makefile.vms: Run dec c with /nodebug.
172 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
174 * Makefile.in: Rebuilt.
175 * Makefile.am: Regenerated dependencies with mkdep.
177 * opintl.h (_): Define as dgettext.
179 start-sanitize-cygnus
180 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
182 * configure.in: Add support for --enable-cgen-maint.
183 * Makefile.am (M32R_DEPS): New variable.
184 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
185 * aclocal.m4: Regenerate.
186 * Makefile.in: Regenerate.
187 * configure: Regenerate.
189 * Makefile.am (CGENFILES): Add minsn.scm.
192 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
194 * cgen-asm.c: Internationalised.
195 start-sanitize-cygnus
196 * cgen-asm.in: Internationalised.
197 * cgen-opc.in: Internationalised.
199 * m32r-asm.c: Internationalised.
200 * m32r-dis.c: Internationalised.
201 * m32r-opc.c: Internationalised.
203 * aclocal.m4: Regenerated.
204 * configure: Regenerated.
205 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
206 * Makefile.in: Rebuild.
207 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
208 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
210 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
212 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
214 * aclocal.m4, configure: Rebuild with current tools.
216 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
218 * opintl.h: New file - contains internationalisation macros used
219 by source files in this directory.
220 * po/: New subdirectory - contains internationalisation files.
221 * po/Make-in: New file - Makefile constructor.
222 * po/POTFILES.in: New file - list of files in opcodes directory
223 that should be scan for internationalisation macros.
224 * po/opcodes.pot: New file - list of internationisation strings
225 found in files mentioned in po/POTFILES.in.
226 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
227 entry. Add intl directory to include paths.
228 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
229 HAVE_STRCPY, HAVE_LC_MESSAGES
230 * configure.in: Add rule to build Makefile in po subdirectory.
231 * Makefile.in: Rebuilt.
232 * aclocal.m4: Rebuilt.
233 * config.in: Rebuilt.
234 * configure: Rebuilt.
235 * alpha-opc.c: Internationalised.
236 * arc-dis.c: Internationalised.
237 * arc-opc.c: Internationalised.
238 * arm-dis.c: Internationalised.
239 * cgen-asm.c: Internationalised.
241 * d30v-dis.c: Internationalised.
243 * dis-buf.c: Internationalised.
245 * dvp-dis.c: Internationalised.
246 * dvp-opc.c: Internationalised.
248 * h8300-dis.c: Internationalised.
249 * h8500-dis.c: Internationalised.
250 * i386-dis.c: Internationalised.
251 * m10200-dis.c: Internationalised.
252 * m10300-dis.c: Internationalised.
253 * m68k-dis.c: Internationalised.
254 * m88k-dis.c: Internationalised.
255 * mips-dis.c: Internationalised.
256 * ns32k-dis.c: Internationalised.
257 * opintl.h: Internationalised.
258 * ppc-opc.c: Internationalised.
259 * sparc-dis.c: Internationalised.
260 * v850-dis.c: Internationalised.
261 * v850-opc.c: Internationalised.
263 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
265 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
266 (asm_hash_table_entries): New variable.
267 (cgen_asm_init): Free asm_hash_table_entries.
268 (hash_insn_array,hash_insn_list): New functions.
269 (build_asm_hash_table): Use them. Hash macro insns as well.
270 (cgen_asm_lookup_insn): Update.
271 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
272 (dis_hash_table_entries): New variable.
273 (cgen_dis_init): Free dis_hash_table_entries.
274 (hash_insn_array,hash_insn_list): New functions.
275 (build_dis_hash_table): Use them. Hash macro insns as well.
276 (cgen_dis_lookup_insn): Update.
277 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
278 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
279 (cgen_macro_insn_count): New function.
280 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
281 All callers updated. Sanity check result of extract fn.
282 (@arch@_cgen_get_insn_operands): Change result type to void.
283 Delete args insn_value, length. New arg fields. All callers updated.
284 (@arch@_cgen_lookup_get_insn_operands): New function.
285 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
287 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
289 * i386-dis.c (OP_DSSI): Print segment override.
292 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
294 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
298 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
300 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
304 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
306 * vu0.h (vlqd, vlqi): Update per revised specs.
310 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
312 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
313 (vif_operands): Update.
314 (vif_get_unpackloc): Delete.
315 (state_vif_unpackloc{,_star_p}): Delete.
316 (dvp_opcode_init_parse): Update.
317 (vif_unpack_len_value): Avoid divide by zero.
321 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
323 * vu0.h: Specs changed for VCALLMSR bit pattern.
324 * mips-dis.c: (print_insn_arg) Matching change.
327 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
329 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
332 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
334 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
335 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
336 * configure.in: Define and substitute WIN32LDFLAGS and
338 * aclocal.m4: Rebuild with new libtool.
339 * configure, Makefile.in: Rebuild.
342 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
344 * vu0.h: Corrected bit pattern for VMAXI opcode.
347 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
349 * m32r-opc.c: Regenerate.
352 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
354 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
355 (dvp_expand_macro): Implement.
356 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
357 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
360 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
362 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
363 before trying to copy it.
364 * Makefile.in: Rebuild.
366 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
368 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
371 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
373 * m32r-opc.c: Fix bit patterns for SAT and SATB.
376 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
378 * ns32k-dis.c (bit_extract_simple): New function to extract bits
379 from an arbitrary valid buffer instead of fetching them on demand
381 (invalid_float): use bit_extract_simple() instead of bit_extract().
384 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
386 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
387 * m32r-opc.h: Add extra control registers.
390 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
392 From H.J. Lu <hjl@gnu.org>:
393 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
396 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
398 * Branched binutils 2.9.
401 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
403 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
404 disassembling last 4 bytes of a section.
407 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
409 Fix some gcc -Wall warnings:
410 * arc-dis.c (print_insn): Add casts to avoid warnings.
411 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
412 * d10v-dis.c (dis_long, dis_2_short): Likewise.
414 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
415 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
416 (parse_bc, parse_vfreg, parse_accdest): Likewise.
417 (parse_ffstreg, parse_vif_mode): Likewise.
419 * m10200-dis.c (disassemble): Likewise.
420 * m10300-dis.c (disassemble): Likewise.
421 * ns32k-dis.c (print_insn_ns32k): Likewise.
422 * ppc-opc.c (insert_ral, insert_ram): Likewise.
423 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
424 * cgen-opc.c (cgen_keyword_search_next): Likewise.
425 * d10v-dis.c (dis_long, dis_2_short): Likewise.
427 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
430 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
431 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
432 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
434 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
436 * tic80-dis.c (print_one_instruction): Likewise.
438 * w65-dis.c (print_operand): Likewise.
439 * z8k-dis.c (fetch_data): Likewise.
440 * a29k-dis.c: Add return type for find_byte_func_type.
441 * arc-opc.c: Include <stdio.h>. Remove declarations of
442 insert_multshift and extract_multshift.
444 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
446 (extract_value): Fully parenthesize expression.
449 * dvp-opc.c: Include <ctype.h>.
450 (print_sdest): Add default case to switch.
452 * h8500-dis.c (print_insn_h8500): Initialize local variables.
453 * h8500-opc.h (h8500_table): Fully bracket initializer.
454 * w65-opc.h (optable): Likewise.
455 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
456 * i386-dis.c (OP_E): Initialize local variables.
457 * m10200-dis.c (print_insn_mn10200): Likewise.
458 * mips-dis.c (print_insn_mips16): Likewise.
459 * sh-dis.c (print_insn_shx): Likewise.
460 * v850-dis.c (print_insn_v850): Likewise.
461 * ns32k-dis.c (print_insn_arg): Declare.
462 (get_displacement, invalid_float): Declare.
463 (list_search, sign_extend, flip_bytes): Declare return type.
464 (get_displacement): Likewise.
465 (print_insn_arg): Likewise. Make d int. Fix sprintf format
467 (print_insn_ns32k): Make i unsigned.
468 (invalid_float): Make static. Declare type of val.
469 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
470 on each for iteration.
471 * tic30-dis.c (get_indirect_operand): Likewise.
472 * z8k-dis.c (print_insn_z8001): Declare return type.
473 (print_insn_z8002): Likewise.
474 (unparse_instr): Fix sprintf format strings.
476 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
478 * mips-opc.c: Add "sync.l" and "sync.p".
481 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
483 * dvp-opc.c (extract_vif_datalen): Rewrite.
484 (vif_insn_len): Perform 0->max+1 conversion for direct length.
486 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
488 * dvp-dis.c (print_insn): Print unpack address in hex.
489 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
490 Don't skip over '*', just record it.
491 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
492 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
493 Don't skip over '*', just record it.
494 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
495 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
496 (vif_opcodes): Likewise.
497 (state_vif_{mpg,unpack}loc_star_p): New static locals.
498 (vif_macros,vif_macro_count): New globals.
499 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
500 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
501 (vif_get_wl_cl): New function.
502 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
505 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
507 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
508 default m68k variant to recognize.
510 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
511 (ctrl, cobr, mem, ea): Likewise.
512 (print_addr): Likewise. Remove cast.
513 (ea): Cast argument of print_addr to bfd_vma.
515 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
517 (cgen_parse_unsigned_integer): Likewise.
518 (cgen_parse_address): Likewise.
520 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
522 * i960-dis.c (ctrl): Add full braces to structure initialization.
523 (cobr, mem, reg): Likewise.
524 (ea): Correct parenthesization in expression.
526 * cgen-asm.c: Include <ctype.h>.
527 (build_asm_hash_table): Remove unused local variable i.
528 (cgen_parse_keyword): Add casts to avoid warnings.
530 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
531 symbol. Fix indentation.
532 (print_insn_little_arm): Likewise.
535 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
537 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
542 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
544 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
549 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
551 * dvp-opc.c (vif_operand_datalen_special): New global.
555 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
557 * vu0.h (vcallms): Use 'O' for call target operand.
558 * mips-dis.c (print_insn_arg): Handle 'O'.
561 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
563 * configure.in: Use AM_DISABLE_SHARED.
564 * aclocal.m4, configure: Rebuild with libtool 1.2.
567 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
569 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
574 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
576 These patches are courtesy of Jonathan Walton and Tony Thompson
577 (athompso@cambridge.arm.com).
579 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
582 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
583 both the offset and the label closest to the destination.
586 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
588 * vu0.h: New file with cop2/vu0 instructions.
589 * mips-opc.c: Include vu0.h.
590 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
592 (print_insn_mips): Do not emit a tab after an instruction if the
593 first arg is an instruction completer (&). If the next arg is an
594 escape character (%), then print the next arg verbatim.
595 * Makefile.am (mips-opc.lo): Depend on vu0.h
599 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
601 * dvp-opc.c (vif_opcodes): Add stcycl.
603 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
605 * dvp-dis.c (print_dma): Change length from 16 to 8.
608 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
610 * m32r-opc.h: Regenerate.
613 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
615 * dvp-opc.c (print_dest1): Print dest spec again.
616 (print_vfreg,print_accdest): Likewise.
617 (vif_unpack_len): Round result up to word boundary.
620 start-sanitize-vr4320
621 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
623 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
625 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
627 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
632 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
634 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
635 (print_insn): Do mask comparison on proper opcode word.
636 Print unsigned values in hex.
637 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
638 (parse_bc): Catch missing dest.
639 (parse_vfreg): Replace atoi call with strtol.
640 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
641 (parse_bcftreg,parse_ffstreg): Handle missing dest.
642 (extract_gif_eop): New function.
643 (gif_operands): Update eop entry.
644 (VGIFOP,VGIFNREGS): Fix calcs.
645 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
646 (gif_regs): Add entry for unused 11 case.
647 (print_gif_regs): Print empty list instead of nothing.
648 (extract_gif_nloop): Fix value calc.
649 (print_gif_nloop): Always print value, even if 0.
650 (insert_vif_wlcl,extract_vif_wlcl): New functions.
651 (vif_operands): Use them for wl,cl fields.
652 (state_vif_wl,state_vif_cl): New static locals.
653 (parse_vif_mode): Handle numeric args.
654 (vif_unpack_len_value,vif_unpack_len): New functions.
655 (vif_insn_len): Call vif_unpack_len.
658 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
660 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
662 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
664 * cgen-asm.in: Move insertion of generated routines to top of file.
665 (insert_normal): Add prototype. Delete `shift' arg.
666 * cgen-dis.in: Move insertion of generated routines to top of file.
667 (extract_normal): Add prototype. Delete `shift' arg.
668 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
669 (print_keyword): Add prototype. Fix type of `attrs' arg.
671 start-sanitize-vr4320
672 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
674 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
675 * mips-opc.c ("mac","dmac") : Added 4320 insns.
678 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
680 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
681 assume that info->symbols is non-empty.
683 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
685 * alpha-opc.c (cvtqs) There is no such thing.
686 (cvttq): Missing most of the /*d variants.
689 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
691 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
693 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
694 (r5900/msub.s): Takes three operands, not four. Fix opcode.
698 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
700 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
701 delayed branches or jumps.
705 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
707 * dvp-opc.c (vif_operands): Add unpack[u] support.
708 (vif_opcodes): Ditto.
709 (*_vif_imrubits): Renamed from *_vif_imrbits.
711 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
713 * dvp-dis.c (print_insn): Handle word number.
714 Handle mips address vs vu address.
715 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
716 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
717 ({insert,extract}_dma_addr): Fix word ofset.
718 ({insert,print}_gif_regs): Fix encode/decode.
721 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
723 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
725 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
726 * tic30-dis.c (print_branch): Likewise.
728 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
729 * dvp-dis.c (dvp_info_mach_type): New function.
730 (print_insn_dvp): Call it.
731 (print_vif): Return length of 4 if mpg or direct insn so following
732 insns get properly disabled.
733 (print_gif): Fix word order.
734 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
735 (gif_operands): Fix word order.
736 (gif_opcodes): Likewise.
737 ({insert,extract,print}_gif_regs): Likewise.
738 (gif_regs): Add new register number/name changes.
739 (dma_opcodes): Add dmarefe insn.
742 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
744 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
745 saved_symbol code as it is no longer needed.
747 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
749 * cgen-asm.c: Include symcat.h.
750 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
752 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
755 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
757 * dvp-opc.c (extra_dma_flags): Fix typos.
758 (dma_operands): Fix word numbers.
759 (dma_opcodes): Likewise.
760 ({insert,extract}_dma_flags): Likewise.
763 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
765 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
768 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
770 * dvp-dis.c (print_gif): Complete.
771 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
772 (state_gif_{nregs,regs,nloop}): New static locals.
774 (dvp_opcode_init_{parse,print}): Init gif state locals.
775 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
776 (vif_insn_len): Handle `unpack'.
777 ({insert,extract}_dma_flags): Complete.
781 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
783 * mips-opc.c (mula.s): Renamed from multa.s.
786 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
788 * m32r-opc.[ch]: Regenerate.
791 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
793 * dvp-opc.c (dma_operands): Rewrite.
794 (dma_operand_{count,addr}): New globals.
795 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
796 (insert_dma_addr): Insert value into insn.
797 (extract_dma_addr): Extract value from insn.
799 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
801 * dvp-dis.c (print_vu): Handle loi insns.
802 (print_insn): Likewise.
803 * dvp-opc.c (vu_lower_opcodes): Add "loi".
804 (vu_operands): Make LDEST1 a FAKE operand.
805 (parse_dest1): Allow elided argument.
806 (print_dest1): Don't print the argument.
808 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
810 * dvp-opc.c (parse_vfreg): Dest spec is optional.
811 (print_vfreg): Don't print dest spec.
812 (parse_accdest): Dest spec is optional.
813 (print_accdest): Don't print dest spec.
816 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
818 * Makefile.am (CGENFILES): Update.
819 * Makefile.in: Regenerate.
820 * cgen-asm.in (insert_normal): Result is error message now.
821 Validate value to be inserted.
822 (insert_insn_normal): Result is error message now.
823 (@arch@_cgen_assemble_insn): Update.
824 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
825 arguments. Don't perform validation here.
826 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
828 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
830 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
831 operand instance list.
832 * m32r-opc.c: Regenerate.
834 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
836 * Makefile.am (AUTOMAKE_OPTIONS): Define.
837 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
839 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
841 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
843 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
845 * configure.in: Get the version number from BFD.
846 * configure: Rebuild.
848 From H.J. Lu <hjl@gnu.org>:
849 * Makefile.am (libopcodes_la_LDFLAGS): Define.
850 * Makefile.in: Rebuild.
852 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
854 * m32r-opc.c: Regenerate.
855 * m32r-opc.h: Regenerate.
857 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
859 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
860 Ignore ALIAS insns if asked to.
861 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
862 * m32r-opc.c: Regenerate.
865 * dvp.opc.c: Nicely format opcode tables.
866 (vu_operands): New element UFLAGS.
867 (parse_uflags,print_uflags): New functions.
868 (vu_upper_opcodes): Add UFLAGS to all insns.
871 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
873 Fix rac to accept only a0:
874 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
875 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
876 Introduce OPERAND_GPR.
877 * d10v-dis.c (print_operand): Likewise.
879 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
881 * cgen-opc.in: New file.
882 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
883 * Makefile.am (CGENFILES): Add cgen-opc.in.
884 * Makefile.in: Regenerate.
886 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
887 (cgen_hw_lookup): Make result const.
889 * cgen-dis.in (*): Use PTR instead of void *.
890 (print_insn): Delete unused vars `i', `syntax'.
892 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
895 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
897 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
898 (vif_opcodes): Update renamed insns.
899 * dvp-dis.c (*): Likewise.
902 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
904 * configure, aclocal.m4: Rebuild with new libtool.
907 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
909 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
910 instructions use a PC relative branch, not absolute.
913 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
915 * configure.in: Set libtool_enable_shared rather than
916 libtool_shared. Remove diversion hack.
917 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
919 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
921 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
922 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
924 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
926 * tic30-dis.c: New file.
927 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
928 * configure.in: Handle bfd_tic30_arch.
929 * Makefile.am: Rebuild dependencies.
930 (CFILES): Add tic30-dis.c
931 (ALL_MACHINES): Add tic30-dis.lo.
932 * configure, Makefile.in: Rebuild.
935 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
937 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
938 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
939 macwhi-a and macwlo-a instructions.
943 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
945 * dvp-opc.c, fixed encoding of a bunch of instructions to
946 be consistent with the asmvu assembler (and inconsistent
947 with the specification).
949 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
951 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
952 in the opcode table. The pkemscalf instruction must come first.
954 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
956 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
959 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
961 * m32r-opc.h (HAVE_CPU_M32R): Define.
964 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
966 * dvp-dis.c, dvp-opc.c: New files.
967 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
968 * configure: Regenerate.
969 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
970 (dvp-dis.lo,dvp-opc.lo): Add rules for.
971 (mips-dis.lo): Compile with @archdefs@.
972 * Makefile.in: Regenerate.
973 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
974 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
977 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
979 * v850-opc.c (insertion routines): If both alignment and size is
980 wrong then report this.
982 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
984 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
985 Only recognize instructions for the current target_processor.
987 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
989 * d10v-dis.c (PC_MASK): Correct value.
990 (print_operand): If there's a reloc, don't calculate the
991 address because they could be in different sections.
993 start-sanitize-cygnus
994 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
996 * cgen.sh: Rewrite to be like simulator's version.
997 * Makefile.am (cgen): Update call to cgen.sh.
998 * Makefile.in: Regenerate
1001 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1003 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1004 instruction after the 4650's "mul" instruction; nobody's using the
1005 4010 these days. If object files someday indicate which processor
1006 variant they're intended for, we can do a better job at this.
1008 start-sanitize-r5900
1009 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1011 * mips-opc.c (c.lt.s): Add r5900 variant.
1015 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1017 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1018 table provided entry size. Use CGEN_INSN_MNEMONIC.
1019 (cgen_parse_keyword): Rewrite.
1020 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1021 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1022 * cgen-opc.c: Clean up pass over `struct foo' usage.
1023 (cgen_keyword_lookup_value): Handle "" entry.
1024 (cgen_keyword_add): Likewise.
1025 start-sanitize-cygnus
1026 * Makefile.am: Add cgen support.
1027 * Makefile.in: Regenerate.
1028 * configure.in: Add cgen support.
1029 * configure: Regenerate.
1030 * aclocal.m4: Regenerate.
1031 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1034 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1036 * mips-opc.c: Add FP_D to s.d instruction flags.
1038 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1040 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1042 start-sanitize-tic80
1043 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1045 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1046 PC relative offset forms before the 15 bit forms. An assembler command
1047 line option now chooses the default.
1050 start-sanitize-r5900
1051 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1053 * mips-opc.c: Add many missing r5900 instructions.
1057 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1059 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1060 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1063 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1065 * configure: Only build libopcodes shared if --enable-shared's value
1066 was `yes', or was set to `*opcodes*'.
1067 * aclocal.m4: Likewise.
1068 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1069 original source of this bit of code. It's not clear what the best fix
1072 start-sanitize-r5900
1073 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1075 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1077 start-sanitize-tic80
1078 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1080 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1081 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1082 offset forms before the 15 bit forms, to default to the long forms.
1085 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1087 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1089 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1091 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1092 symbol if none is present.
1093 (print_insn_big_arm): Prevent examination of stored symbol if
1096 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1098 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1100 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1102 * disassemble.c: Remove disasm_symaddr() function.
1104 * arm-dis.c: Use info->symbol instead of info->flags to determine
1105 if disassmbly should be in Thumb or Arm mode.
1107 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1109 * arm-dis.c: Add support for disassembling Thumb opcodes.
1110 (print_insn_thumb): New function.
1112 * disassemble.c (disasm_symaddr): New function.
1114 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1115 (thumb_opcodes): Table of Thumb opcodes.
1117 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1119 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1121 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1122 and 'v' as operand types.
1124 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1126 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1127 <olivier.carmona@di.epfl.ch>.
1128 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1129 which has a two word opcode with a one word argument.
1132 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1134 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1135 unsigned, not signed.
1136 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1139 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1141 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1142 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1143 (ftrv): Slay the cut-and-paste monster.
1145 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1147 * d10v-dis.c (print_operand):
1148 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1150 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1152 * d10v-opc.c (OPERAND_FLAG): Split into:
1153 (OPERAND_FFLAG, OPERAND_CFLAG) .
1157 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1159 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1160 field for all INSN_MACRO's.
1161 * mips16-opc.c: same
1163 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1165 * mips-opc.c (sync,cache): These are 3900 insns.
1167 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1169 sh-opc.h (sh_table): Remove ftst/nan.
1171 start-sanitize-vr5400
1172 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1174 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1175 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1177 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1181 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1183 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1184 Add tx49 insns and configury.
1187 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1189 * mips-opc.c (ffc, ffs): Fix mask.
1192 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1194 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1198 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1200 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1201 start-sanitize-vr5400
1202 Added VR5400 instructions.
1203 (N5): New cpu-id macro.
1205 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1207 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1209 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1210 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1212 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1214 * v850-dis.c (disassemble): Replace // with /* ... */
1216 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1218 * sparc-opc.c: Add wr & rd for v9a asr's.
1219 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1220 (v9a_asr_reg_names): New variable.
1221 Patch from David Miller <davem@vger.rutgers.edu>.
1223 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1225 * sparc-opc.c (v9notv9a): New insn type.
1226 (IMPDEP): Move to the end to not conflict with edge8 et al.
1227 Patch from David Miller <davem@vger.rutgers.edu>.
1229 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1231 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1233 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1235 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1237 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1239 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1240 of disassemble_info structure to determine if an overlay address
1241 has a matching symbol in low memory.
1243 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1244 new symbol_at_address_func field in disassemble_info structure.
1246 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1248 * v850-opc.c (extract_d22): Use signed arithmatic.
1250 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1252 * mips-opc.c: Three op mult is not an ISA insn.
1254 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1256 * mips-opc.c: Fix formatting.
1258 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1260 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1261 than assuming that char is signed. Explicitly sign extend 16 bit
1262 values, rather than assuming that short is 16 bits.
1263 (OP_sI, OP_J, OP_DIR): Likewise.
1265 start-sanitize-v850e
1266 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1268 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1272 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1274 * v850-opc.c: Fix typo in comment.
1276 * v850-dis.c (disassemble): Add test of processor type when
1277 determining opcodes.
1279 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1281 * configure.in: Use a diversion to set enable_shared before the
1282 arguments are parsed.
1283 * configure: Rebuild.
1285 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1287 * m68k-opc.c (TBL1): Use ! rather than `.
1288 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1290 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1292 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1294 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1296 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1299 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1300 * aclocal.m4: Rebuild with new libtool.
1301 * configure: Rebuild.
1303 start-sanitize-v850e
1304 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1306 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1309 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1311 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1313 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1315 * v850-opc.c (v850_opcodes): Further rearrangements.
1318 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1320 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1323 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1325 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1328 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1330 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1332 * mips16-opc.c: Added mips16 sdbbp.
1335 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1337 * v850-opc.c: Initialise processors field of v850_opcode structure.
1340 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1342 Merge changes from Martin Hunt:
1344 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1346 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1347 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1348 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1350 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1352 * d30v-dis.c (print_insn): First operand of d*i (delayed
1353 branch) instructions is relative.
1355 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1356 (d30v_operand_table): Add IMM6S3 type.
1357 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1359 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1360 and cmp instructions.
1362 * d30v-opc.c: Correct entries for repeat*, and sat*.
1363 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1364 types. Correct several formats.
1366 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1368 * d30v-opc.c (pre_defined_registers): Change control registers.
1370 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1371 SHORT_C2. Manual was incorrect.
1373 * d30v-dis.c (lookup_opcode): Return value now indicates
1374 if an opcode has a short and a long form. Used for deciding
1375 to append a ".s" or ".l".
1376 (print_insn): Append a ".s" to an instruction if it is
1377 the short form and ".l" if it is a long form. Do not append
1378 anything if the instruction has only one possible size.
1380 * d30v-opc.c: Change mulx2h to require an even register.
1381 New form: SHORT_A2; a SHORT_A form that needs an even
1382 register as the first operand.
1384 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1385 instruction was not being disassembled if there were an odd
1386 number of instructions.
1388 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1391 start-sanitize-v850e
1392 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1394 * v850-dis.c (disassemble): Improved display of register lists.
1397 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1399 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1400 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1401 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1402 fandnot1s, fandnot2s.
1404 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1406 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1408 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1410 * cgen-asm.c (cgen_parse_address): New argument resultp.
1411 All callers updated.
1412 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1414 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1416 * mn10200-dis.c (disassemble): PC relative instructions are
1417 relative to the next instruction, not the current instruction.
1419 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1421 * v850-dis.c (disassemble): Only signed extend values that are not
1422 returned by extract functions.
1423 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1425 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1427 * v850-opc.c: Update comments. Remove use of
1428 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1430 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1432 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1434 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1436 * configure: Rebuilt with latest devo autoconf for NT support.
1438 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1440 * v850-dis.c (disassemble): Use curly brace syntax for register
1443 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1444 where r0 is being used as a destination register.
1446 start-sanitize-v850e
1447 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1449 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1452 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1454 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1455 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1456 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1457 Add insns to access SGR and DBR.
1458 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1460 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1462 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1464 start-sanitize-v850e
1465 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1467 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1468 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1471 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1473 * configure (cgen_files): Add support for v850e target.
1474 * configure.in (cgen_files): Add support for v850e target.
1476 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1478 * configure (cgen_files): Add support for v850ea target.
1479 * configure.in (cgen_files): Add support for v850ea target.
1482 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1484 * configure.in (bfd_arc_arch): Add.
1485 * configure: Rebuild.
1486 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1487 * Makefile.in: Rebuild.
1488 * arc-dis.c, arc-opc.c: New files.
1489 * disassemble.c (ARCH_all): Define ARCH_arc.
1490 (disassembler): Add ARC support.
1492 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1494 start-sanitize-v850e
1495 * v850-dis.c (disassemble): Add support for v850EA instructions.
1497 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1498 (v850_opcodes): Add v850EA instructions.
1500 * v850-dis.c (disassemble): Add support for v850E instructions.
1502 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1503 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1504 insert_spe, extract_spe): New Functions.
1505 (v850_opcodes): Add v850E instructions.
1508 * v850-opc.c: Reorganised and re-layed out to improve readability
1511 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1513 * configure: Rebuild with autoconf 2.12.1.
1515 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1517 * aclocal.m4, configure: Rebuild with new automake patches.
1519 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1521 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1522 * acinclude.m4: Just include acinclude.m4 from BFD.
1523 * aclocal.m4, configure: Rebuild.
1525 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1527 * Makefile.am: New file, based on old Makefile.in.
1528 * acconfig.h: New file.
1529 * acinclude.m4: New file.
1530 * stamp-h.in: New file.
1531 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1532 Removed shared library handling; now handled by libtool. Replace
1533 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1534 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1535 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1536 handling in AC_OUTPUT.
1537 * dep-in.sed: Change .o to .lo.
1538 * Makefile.in: Now built with automake.
1539 * aclocal.m4: Now built with aclocal.
1540 * config.in, configure: Rebuild.
1542 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1544 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1546 start-sanitize-r5900
1547 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1549 * mips-opc.c: Fix coding of mtsa.
1552 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1554 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1556 * sparc-dis.c (sorted_opcodes): New static local.
1557 (struct opcode_hash): `opcode' is pointer to const element.
1558 (build_hash): First arg is now table of sorted pointers.
1559 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1560 (compare_opcodes): Update.
1562 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1564 * cgen-opc.c: #include <ctype.h>.
1565 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1566 Handle case insensitive hashing.
1567 (hash_keyword_value): Change type of `value' to unsigned int.
1569 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1571 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1572 precision FP, mark it as such. Likewise for double precision
1573 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1575 start-sanitize-r5900
1576 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1579 start-sanitize-r5900
1580 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1582 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1583 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1586 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1588 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1590 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1591 nesting depth when all the macros are expanded.
1593 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1595 * sparc-opc.c: The fcmp v9a instructions take an integer register
1596 as a destination, not a floating point register. From Christian
1597 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1599 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1601 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1602 syntax. From Roman Hodek
1603 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1605 * i386-dis.c (twobyte_has_modrm): Fix pand.
1607 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1609 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1611 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1613 * arm-dis.c: Add prototypes for arm_decode_shift and
1616 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1618 * mips-opc.c: Add r3900 insns.
1620 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1622 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1623 print delay slot instructions on the same line. When using a PC
1624 relative load, add a comment with the value being loaded if it can
1627 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1629 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1630 to pushS/popS for segment regs and byte constant so that
1631 pushw/popw printed when in 16 bit data mode.
1633 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1634 print cbtw, cwtd in 16 bit data mode.
1635 * i386-dis.c (putop): extra case W to support above.
1637 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1638 address size prefix in 16 bit address mode.
1640 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1642 * sh-dis.c: Reindent. Rename local variable fprintf to
1645 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1647 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1649 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1651 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1653 * mips16-opc.c (mip16_opcodes): same.
1655 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1657 * m68k-opc.c (moveb): Change $d to %d.
1659 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1661 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1662 (twobyte_has_modrm): Likewise.
1664 (OP_MMX, OP_EM, OP_MS): New static functions.
1666 * i386-dis.c: Revert patch of April 4. The output now matches
1669 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1671 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1674 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1676 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1678 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1680 * Makefile.in (install): Depend upon installdirs.
1681 (installdirs): New target.
1683 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1685 From Thomas Graichen <graichen@rzpd.de>:
1686 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1687 * configure: Rebuild.
1689 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1691 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1692 Delete string{,s}.h support.
1694 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1696 * cgen-asm.c (cgen_parse_operand_fn): New global.
1697 (cgen_parse_{{,un}signed_integer,address}): Update call to
1698 cgen_parse_operand_fn.
1699 (cgen_init_parse_operand): New function.
1700 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1701 from cgen_asm_init_parse.
1702 (m32r_cgen_assemble_insn): New operand `errmsg'.
1703 Delete call to as_bad, return error message to caller.
1704 (m32r_cgen_asm_hash_keywords): #if 0 out.
1706 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1708 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1710 [case 'J']: Fix typo in register name.
1712 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1714 * configure.in: Substitute SHLIB_LIBS.
1715 * configure: Rebuild.
1716 * Makefile.in (SHLIB_LIBS): New variable.
1717 ($(SHLIB)): Use $(SHLIB_LIBS).
1719 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1721 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1723 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1725 * disassemble.c (disassembler): Handle m32r.
1727 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1729 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1730 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1731 * Makefile.in (CFILES): Add them.
1732 (ALL_MACHINES): Add them.
1733 (dependencies): Regenerate.
1734 * configure.in (cgen_files): New variable.
1735 (bfd_m32r_arch): Add entry.
1736 * configure: Regenerate.
1738 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1740 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1741 * configure: Rebuild.
1743 * Makefile.in: Rebuild dependencies.
1745 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1747 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1750 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1752 * Branched binutils 2.8.
1754 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1756 * m10200-dis.c: Rename from mn10200-dis.c.
1757 * m10200-opc.c: Rename from mn10200-opc.c.
1758 * m10300-dis.c: Rename from mn10300-dis.c
1759 * m10300-opc.c: Rename from mn10300-opc.c.
1760 * Makefile.in: Update accordingly.
1762 * mips16-opc.c: Add mul and dmul macros.
1764 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1766 * makefile.vms: Update CFLAGS, add clean target.
1768 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1770 * mips-opc.c: Add "wait". From Ralf Baechle
1771 <ralf@gnu.ai.mit.edu>.
1773 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1774 * configure, config.in: Rebuild.
1775 * sysdep.h: Include <stdlib.h> if it exists.
1776 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1778 * Makefile.in: Rebuild dependencies.
1780 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1782 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1783 Andrew Bray <andy@madhouse.demon.co.uk>.
1785 * mips-opc.c: Add cast when setting mips_opcodes.
1787 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1789 * v850-dis.c (disassemble): Fix sign extension problem.
1790 * v850-opc.c (extract_d*): Fix sign extension problems to make
1791 disassembly calculate branch offsets correctly.
1793 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1795 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1797 * mips-opc.c: Add dctr and dctw.
1800 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1802 * d30v-dis.c (print_insn): Change the way signed constants
1805 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1807 * Makefile.in (BFD_H): New variable.
1808 (HFILES): New variable.
1809 (CFILES): Add all C files.
1810 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1811 Delete old dependencies, and build new ones.
1812 * dep-in.sed: New file.
1814 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1816 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1818 start-sanitize-coldfire
1819 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1821 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1824 end-sanitize-coldfire
1825 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1827 * mn10200-opc.c: Change "trap" to "syscall".
1828 * mn10300-opc.c: Add new "syscall" instruction.
1830 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1832 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1833 mulul insns on the coldfire.
1835 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1837 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1838 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1839 (print_insn_little_arm): Likewise.
1841 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1843 Based on patches from H.J. Lu <hjl@lucon.org>:
1844 * i386-dis.c (fetch_data): Add prototype.
1845 * m68k-dis.c (fetch_data): Add prototype.
1846 (dummy_print_address): Add prototype. Make static.
1847 * ppc-opc.c (valid_bo): Add prototype.
1848 * sparc-dis.c (build_hash_table): Add prototype.
1849 (is_delayed_branch, compute_arch_mask): Add prototypes.
1850 (print_insn_sparc): Make several local variables const.
1851 (compare_opcodes): Change arguments to const PTR. Add prototype.
1852 * sparc-opc.c (arg): Change name field to be const.
1853 (lookup_name, lookup_value): Add prototypes. Change table and
1854 name parameters to be const.
1855 (sparc_encode_asi): Change name parameter to be const.
1856 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1857 (sparc_encode_sparclet_cpreg): Likewise.
1858 (sparc_decode_asi): Change return type to be const.
1859 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1860 (sparc_decode_sparclet_cpreg): Likewise.
1862 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1864 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1865 Solaris doesn't like the combined options, and the -f is
1867 (stamp-tshlink, install): Likewise.
1869 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1871 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1874 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1876 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1878 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1880 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1883 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1885 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1887 start-sanitize-tic80
1888 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1890 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1892 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1894 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1897 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1899 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1900 floatformat_to_double to make portable.
1901 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1904 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
1906 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
1907 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
1909 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1911 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
1912 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1914 start-sanitize-tic80
1915 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1917 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1918 (OFF_SL_BR_SCALED): ... to this, and added the flag
1919 TIC80_OPERAND_BASEREL to the flags word.
1920 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1924 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1926 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1927 Change mips_opcodes from const array to a pointer,
1928 and change bfd_mips_num_opcodes from const int to int,
1929 so that we can increase the size of the mips opcodes table
1932 start-sanitize-tic80
1933 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1935 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1936 store BITNUM values in the table in one's complement form
1937 to match behavior when assembler is given a raw numeric
1938 value for a BITNUM operand.
1939 * tic80-dis.c (print_operand_bitnum): Ditto.
1943 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1945 * d30v-opc.c: Removed references to FLAG_X.
1948 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1950 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1953 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1955 * Makefile.in: Added d30v object files.
1956 * configure: (bfd_d30v_arch) Rebuilt.
1957 * configure.in: (bfd_d30v_arch) Added new case.
1958 * d30v-dis.c: New file.
1959 * d30v-opc.c: New file.
1960 * disassemble.c (disassembler) Add entry for d30v.
1963 start-sanitize-tic80
1964 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1966 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1967 representations for the floating point BITNUM values.
1969 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1971 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1972 in the table in one's complement form, as they appear in the
1974 (tic80_symbol_to_value): Use macros to access predefined
1976 (tic80_value_to_symbol): Ditto.
1977 (tic80_next_predefined_symbol): New function.
1978 * tic80-dis.c (print_operand_bitnum): Remove code that did
1979 one's complement for BITNUM values.
1982 start-sanitize-r5900
1983 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1985 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1988 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1990 * makefile.vms: Remove 8 bit characters. Update to latest
1993 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1995 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1997 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1999 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2000 (IMM24_PCREL): Likewise.
2002 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2004 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2005 address for an extended PC relative instruction that is not a
2008 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2010 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2013 start-sanitize-tic80
2014 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2016 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2017 (tic80_opcodes): Sort entries so that long immediate forms
2018 come after short immediate forms, making it easier for
2019 assembler to select the right one for a given operand.
2022 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2024 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2026 (print_insn_mips16): Likewise.
2028 start-sanitize-r5900
2029 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2031 * mips-opc.c: add r5900.
2034 start-sanitize-tic80
2035 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2037 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2038 a symbol class that restricts translation to just that
2039 class (general register, condition code, etc).
2041 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2043 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2044 and REG_DEST_E for register operands that have to be
2045 an even numbered register. Add REG_FPA for operands that
2046 are one of the floating point accumulator registers.
2047 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2048 (tic80_opcodes): Change entries that need even numbered
2049 register operands to use the new operand table entries.
2050 Add "or" entries that are identical to "or.tt" entries.
2053 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2055 * mips16-opc.c: Add new cases of exit instruction for
2057 * mips-dis.c (print_mips16_insn_arg): Display floating point
2058 registers in operands of exit instruction. Print `$' before
2059 register names in operands of entry and exit instructions.
2061 start-sanitize-tic80
2062 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2064 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2065 pairs for all predefined symbols recognized by the assembler.
2066 Also used by the disassembling routines.
2067 (tic80_symbol_to_value): New function.
2068 (tic80_value_to_symbol): New function.
2069 * tic80-dis.c (print_operand_control_register,
2070 print_operand_condition_code, print_operand_bitnum):
2071 Remove private tables and use tic80_value_to_symbol function.
2074 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2076 * d10v-dis.c (print_operand): Change address printing
2077 to correctly handle PC wrapping. Fixes PR11490.
2079 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2081 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2084 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2086 * mips-dis.c (print_insn_mips16): Set insn_info information.
2087 (print_mips16_insn_arg): Likewise.
2089 * mips-dis.c (print_insn_mips16): Better handling of an extend
2090 opcode followed by an instruction which can not be extended.
2092 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2094 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2095 coldfire moveb instruction to not allow an address register as
2096 destination. Although the documentation does not indicate that
2097 this is invalid, experiments uncovered unexpected behavior.
2098 Added a comment explaining the situation. Thanks to Andreas
2099 Schwab for pointing this out to me.
2101 start-sanitize-tic80
2102 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2104 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2105 entries are presorted so that entries with the same mnemonic are
2106 adjacent to each other in the table. Sort the entries for each
2107 instruction so that this is true.
2110 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2112 * m68k-dis.c: Include <libiberty.h>.
2113 (print_insn_m68k): Sort the opcode table on the most significant
2114 nibble of the opcode.
2116 start-sanitize-tic80
2117 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2119 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2120 "vsub", "vst", "xnor", and "xor" instructions.
2121 (V_a1): Renamed from V_a, msb of accumulator reg number.
2122 (V_a0): Add macro, lsb of accumulator reg number.
2124 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2126 * tic80-dis.c (print_insn_tic80): Broke excessively long
2127 function up into several smaller ones and arranged for
2128 the instruction printing function to be callable recursively
2129 to print vector instructions that have both a load and a
2130 math instruction packed into a single opcode.
2131 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2132 to explain why it comes after the other vector opcodes.
2135 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2137 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2138 move insns to handle immediate operands.
2140 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2142 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2143 fix operand mask in the "moveml" entries for the coldfire.
2145 start-sanitize-tic80
2146 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2148 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2149 New macros for building vector instruction opcodes.
2150 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2151 FMT_LI, which were unused. The field is now a flags field.
2152 Remove some opcodes that are possible, but illegal, such
2153 as long immediate instructions with doubles for immediate
2154 values. Add "vadd" and "vld" instructions.
2156 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2158 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2159 the order more logical. Move the shift alias instructions ("rotl",
2160 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2161 interspersed with the regular sr.x and sl.x instructions. Add
2162 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2163 "sub", "subu", "swcr", and "trap".
2165 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2167 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2168 (OFF_SL_PC): Renamed from OFF_SL.
2169 (OFF_SS_BR): New operand type for base relative operand.
2170 (OFF_SL_BR): New operand type for base relative operand.
2171 (REG_BASE): New operand type for base register operand.
2172 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2173 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2174 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2176 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2177 10 char field, padded with spaces on rhs, rather than a string
2178 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2179 than old TIC80_OPERAND_RELATIVE. Add support for new
2180 TIC80_OPERAND_BASEREL flag bit.
2182 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2184 * tic80-dis.c (print_insn_tic80): Print floating point operands
2186 * tic80-opc.c (SPFI): Add single precision floating point
2187 immediate operand type.
2188 (ROTATE): Add rotate operand type for shifts.
2189 (ENDMASK): Add for shifts.
2190 (n): Macro for the 'n' bit.
2191 (i): Macro for the 'i' bit.
2192 (PD): Macro for the 'PD' field.
2193 (P2): Macro for the 'P2' field.
2194 (P1): Macro for the 'P1' field.
2195 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2199 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2201 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2202 adding in current address for pc-relative operands.
2204 start-sanitize-tic80
2205 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2207 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2208 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2209 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2210 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2211 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2212 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2213 (REG_SCALED, LSI_SCALED): New operand types.
2214 (E): New macro for 'E' bit at bit 27.
2215 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2216 opcodes, including the various size flavors (b,h,w,d) for
2217 the direct load and store instructions.
2219 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2221 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2223 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2224 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2225 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2226 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2227 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2228 masks with "MASK_* & ~M_*" to get the M bit reset.
2229 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2231 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2233 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2234 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2235 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2237 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2238 CC, SICR, and LICR table entries.
2239 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2240 "bcnd", and "brcr" opcodes.
2243 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2245 * ppc-opc.c (powerpc_operands): Make comment match the
2246 actual fields (no shift field).
2247 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2248 start-sanitize-tic80
2249 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2250 partial implementation, work in progress.
2251 * tic80-opc.c (tic80_operands): Begin construction operands table.
2252 (tic80_opcodes): Continue populating opcodes table and start
2253 filling in the operand indices.
2254 (tic80_num_opcodes): Add this.
2257 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2259 * m68k-opc.c: Add #B case for moveq.
2261 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2263 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2264 before they are used.
2266 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2268 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2269 for "breakpoint" instruction.
2271 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2273 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2274 (dep): Use ALL_CFLAGS rather than CFLAGS.
2276 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2278 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2281 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2283 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2284 start-sanitize-tic80
2285 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2288 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2290 * mips16-opc.c: Add "abs".
2292 start-sanitize-tic80
2293 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2295 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2296 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2297 (disassembler): Add bfd_arch_tic80 support to set disassemble
2298 to print_insn_tic80.
2299 * tic80-dis.c (print_insn_tic80): Add stub.
2301 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2303 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2304 * configure: Regenerate with autoconf.
2305 * tic80-dis.c: Add file.
2306 * tic80-opc.c: Add file.
2309 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2311 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2313 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2315 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2316 (mn10200_opcodes): Use it for some logicals and btst insns.
2317 Add "break" and "trap" instructions.
2319 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2321 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2323 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2325 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2326 relative load or add now depends upon whether the instruction is
2329 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2331 * mn10200-dis.c: Finish writing disassembler.
2332 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2333 Fix mask for "jmp (an)".
2335 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2336 handle endianness issues for mn10300.
2338 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2340 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2342 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2343 instruction. Fix opcode field for "movb (imm24),dn".
2345 * mn10200-opc.c (mn10200_operands): Fix insertion position
2348 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2350 * mn10200-opc.c: Create mn10200 opcode table.
2351 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2352 but moving along nicely.
2354 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2356 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2358 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2360 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2361 specifiers for fmovem* instructions.
2363 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2365 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2367 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2369 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2372 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2374 * mn10300-opc.c: Add some comments explaining the various
2377 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2379 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2381 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2384 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2385 operand specifiers in fmovm* instructions.
2387 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2389 * ppc-opc.c (insert_li): Give an error if the offset has the two
2390 least significant bits set.
2392 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2394 * mips-dis.c (print_insn_mips16): Separate the instruction from
2395 the arguments with a tab, not a space.
2397 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2399 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2402 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2405 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2407 * configure: Rebuild with autoconf 2.12.
2409 Add support for mips16 (16 bit MIPS implementation):
2410 * mips16-opc.c: New file.
2411 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2412 (mips16_reg_names): New static array.
2413 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2414 after seeing a 16 bit symbol.
2415 (print_insn_little_mips): Likewise.
2416 (print_insn_mips16): New static function.
2417 (print_mips16_insn_arg): New static function.
2418 * mips-opc.c: Add jalx instruction.
2419 * Makefile.in (mips16-opc.o): New target.
2420 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2421 * configure: Rebuild.
2423 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2425 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2426 operand specifiers in *save, *restore and movem* instructions.
2428 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2431 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2432 register operands for immediate arithmetic, not, neg, negx, and
2433 set according to condition instructions.
2435 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2436 specifier of the effective-address operand in immediate forms of
2437 arithmetic instructions. The specifier for the immediate operand
2438 notes how and where the constant will be stored.
2440 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2442 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2445 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2448 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2450 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2452 * mn10300-dis.c (disassemble): Handle register lists.
2454 * mn10300-opc.c: Fix handling of register list operand for
2455 "call", "ret", and "rets" instructions.
2457 * mn10300-dis.c (disassemble): Print PC-relative and memory
2458 addresses symbolically if possible.
2459 * mn10300-opc.c: Distinguish between absolute memory addresses,
2460 pc-relative offsets & random immediates.
2462 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2464 (disassemble): Handle SPLIT and EXTENDED operands.
2466 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2468 * mn10300-dis.c: Rough cut at printing some operands.
2470 * mn10300-dis.c: Start working on disassembler support.
2471 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2473 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2475 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2477 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2479 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2481 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2483 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2484 register argument is calls and jmp instructions.
2486 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2488 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2489 getx operand. Fix opcode for mulqu imm,dn.
2491 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2493 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2494 in MN10300_OPERAND_SPLIT operands for how many bits
2495 appear in the basic insn word. Add IMM32_HIGH24,
2496 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2497 (mn10300_opcodes): Use new operands as needed.
2499 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2500 for bset, bclr, btst instructions.
2501 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2503 * mn10300-opc.c (mn10300_operands): Remove many redundant
2504 operands. Update opcode table as appropriate.
2505 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2506 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2508 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2510 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2511 operands (for indexed load/stores). Fix bitpos for DI
2512 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2513 few instructions that insert immediates/displacements in the
2514 middle of the instruction. Add IMM8E for 8 bit immediate in
2515 the extended part of an instruction.
2516 (mn10300_operands): Use new opcodes as appropriate.
2518 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2520 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2521 sequential so the assembler never parallelizes it with
2524 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2526 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2527 a data/address register that appears in register field 0
2528 and register field 1.
2529 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2531 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2533 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2534 standard disassembly.
2536 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2537 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2538 Recategorize PALcode instructions.
2540 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2542 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2544 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2546 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2547 there are no operand types.
2549 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2551 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2553 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2555 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2557 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2559 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2561 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2562 and sst.w instructions.
2564 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2567 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2569 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2572 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2574 * ppc-opc.c (PPCPWR2): Define.
2575 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2578 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2580 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2581 field for movhu instruction.
2583 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2584 cast value to "long" not "signed long" to keep hpux10
2587 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2589 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2592 * mn10300-opc.c (FMT*): Remove definitions.
2594 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2595 for shift-by-register opcodes.
2597 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2598 into [AD][MN][01] for encoding the position of the register
2601 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2603 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2604 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2606 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2608 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2609 Fix various typos. Add "PAREN" operand.
2610 (MEM, MEM2): Define.
2611 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2612 operands. Fix several typos.
2614 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2617 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2619 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2620 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2622 (mn10300_opcodes): Break opcode format out into its own field.
2623 Update many operand fields to deal with signed vs unsigned
2624 issues. Fix one or two typos in the "mov" instruction
2625 opcode, mask and/or operand fields.
2627 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2629 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2630 m68851 wasn't reset.
2632 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2634 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2635 all opcodes. Very rough cut at operands for all opcodes.
2637 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2640 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2642 * mn10200-opc.c, mn10300-opc.c: New files.
2643 * mn10200-dis.c, mn10300-dis.c: New files.
2644 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2645 * disassemble.c: Break mn10x00 support into 10200 and 10300
2647 * configure.in: Likewise.
2648 * configure: Rebuilt.
2650 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2652 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2654 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2656 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2658 * disassemble (ARCH_mn10x00): Define.
2659 (disassembler): Handle bfd_arch_mn10x00.
2660 * configure.in: Recognize bfd_mn10x00_arch.
2661 * configure: Rebuilt.
2663 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2665 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2666 accordingly. Don't declare functions using op_rtn.
2668 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2670 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2671 params to be more standard.
2672 * (disassemble): Print absolute addresses and symbolic names for
2673 branch and jump targets.
2674 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2676 * (v850_opcodes): Add breakpoint insn.
2678 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2680 * m68k-opc.c: Move the fmovemx data register cases before the
2681 other cases, so that they get recognized before the data register
2682 does gets treated as a degenerate register list.
2684 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2686 * mips-opc.c: Add a case for "div" and "divu" with two registers
2687 and a destination of $0.
2689 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2691 * mips-dis.c (print_insn_arg): Add prototype.
2692 (_print_insn_mips): Ditto.
2694 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2696 * mips-dis.c (print_insn_arg): Print condition code registers as
2699 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2701 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2703 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2705 * v850-dis.c (disassemble): Make static. Provide prototype.
2707 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2709 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2712 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2714 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2715 ']' characters into the output stream.
2716 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2717 Add "memop" field to all opcodes (for the disassembler).
2718 Reorder opcodes so that "nop" comes before "mov" and "jr"
2719 comes before "jarl".
2721 * v850-dis.c (print_insn_v850): Fix typo in last change.
2723 * v850-dis.c (print_insn_v850): Properly handle disassembling
2724 a two byte insn at the end of a memory region when the memory
2725 region's size is only two byte aligned.
2727 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2729 * v850-dis.c (v850_reg_names): Define.
2730 (v850_sreg_names, v850_cc_names): Likewise.
2731 (disassemble): Very rough cut at printing operands (unformatted).
2733 * v850-opc.c (BOP_MASK): Fix.
2734 (v850_opcodes): Fix mask for jarl and jr.
2736 * v850-dis.c: New file. Skeleton for disassembler support.
2737 * Makefile.in Remove v850 references, they're not needed here.
2738 * configure.in: Add v850-dis.o when building v850 toolchains.
2739 * configure: Rebuilt.
2740 * disassemble.c (disassembler): Call v850 disassembler.
2742 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2743 (insert_d8_6, extract_d8_6): New functions.
2744 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2745 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2747 (IF4A, IF4B): Use "D7" instead of "D7S".
2748 (IF4C, IF4D): Use "D8_7" instead of "D8".
2749 (IF4E, IF4F): New. Use "D8_6".
2750 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2751 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2753 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2754 (v850_operands): Change D16 to D16_15, use special insert/extract
2755 routines. New new D16 that uses the generic insert/extract code.
2756 (IF7A, IF7B): Use D16_15.
2757 (IF7C, IF7D): New. Use D16.
2758 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2760 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2761 message. Issue an error if the branch offset is odd.
2763 * v850-opc.c: Add notes about needing special insert/extract
2764 for all the load/store insns, except "ld.b" and "st.b".
2766 * v850-opc.c (insert_d22, extract_d22): New functions.
2767 (v850_operands): Use insert_d22 and extract_d22 for
2769 (insert_d9): Fix range check.
2771 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2773 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2774 and set bits field to D9 and D22 operands.
2776 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2778 * v850-opc.c (v850_operands): Define SR2 operand.
2779 (v850_opcodes): "ldsr" uses R1,SR2.
2781 * v850-opc.c (v850_opcodes): Fix opcode specs for
2782 sld.w, sst.b, sst.h, sst.w, and nop.
2784 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2786 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2787 end of the opcode table.
2789 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2791 * d10v-opc.c (pre_defined_registers): Added register pairs,
2792 "r0-r1", "r2-r3", etc.
2794 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2796 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2797 Create I16U for an unsigned 16bit mmediate operand.
2798 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2800 * v850-opc.c (v850_operands): Define EP operand.
2801 (IF4A, IF4B, IF4C, IF4D): Use EP.
2803 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2804 with immediate operand, "movhi". Tweak "ldsr".
2806 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2807 correct. Get sld.[bhw] and sst.[bhw] closer.
2809 * v850-opc.c (v850_operands): "not" is a two byte insn
2811 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2813 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2815 * v850-opc.c (two): Get order of words correct.
2817 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2819 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2820 register source and destination operands.
2821 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2823 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2824 same thinko in "trap" opcode.
2826 * v850-opc.c (v850_opcodes): Add initializer for size field
2829 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2830 Add D8 for 8-bit unsigned field in short load/store insns.
2831 (IF4A, IF4D): These both need two registers.
2832 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2833 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2834 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2835 for "ldsr" and "stsr".
2836 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2839 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2840 short store word (sst.w).
2842 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2844 * v850-opc.c (v850_operands): Added insert and extract fields,
2845 pointers to functions that handle unusual operand encodings.
2847 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2849 * v850-opc.c (v850_opcodes): Enable "trap".
2851 * v850-opc.c (v850_opcodes): Fix order of displacement
2852 and register for "set1", "clr1", "not1", and "tst1".
2854 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2856 * v850-opc.c (v850_operands): Add "B3" support.
2857 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2860 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2862 * v850-opc.c: Close unterminated comment.
2864 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2866 * v850-opc.c (v850_operands): Add flags field.
2867 (v850_opcodes): add move opcodes.
2869 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2871 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2872 * configure: (bfd_v850v_arch) Add new case.
2873 * configure.in: (bfd_v850_arch) Add new case.
2874 * v850-opc.c: New file.
2876 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2878 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2880 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2882 * d10v-opc.c: Add additional information to the opcode
2883 table to help determinine which instructions can be done
2886 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2888 * mpw-make.sed: Update editing of include pathnames to be
2891 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2893 * arm-opc.h: Added "bx" instruction definition.
2895 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2897 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2899 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2901 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2903 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2905 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
2907 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
2909 * makefile.vms: Update for alpha-opc changes.
2911 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
2913 * i386-dis.c (print_insn_i386): Actually return the correct value.
2914 (ONE, OP_ONE): #ifdef out; not used.
2916 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2918 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2919 Changed subi operand type to treat 0 as 16.
2921 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2923 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2926 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2928 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2929 memory transfer instructions. Add new format string entries %h and %s.
2930 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2933 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2935 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2936 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2938 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2940 * alpha-dis.c (print_insn_alpha_osf): Remove.
2941 (print_insn_alpha_vms): Remove.
2942 (print_insn_alpha): Make globally visible. Chose the register
2943 names based on info->flavour.
2944 * disassemble.c: Always return print_insn_alpha for the alpha.
2946 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2948 * d10v-dis.c (dis_long): Handle unknown opcodes.
2950 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2952 * d10v-opc.c: Changes to support signed and unsigned numbers.
2953 All instructions with the same name that have long and short forms
2954 now end in ".l" or ".s". Divs added.
2955 * d10v-dis.c: Changes to support signed and unsigned numbers.
2957 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2959 * d10v-dis.c: Change all functions to use info->print_address_func.
2961 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2963 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2964 move ccr/sr insns more strict so that the disassembler only
2965 selects them when the addressing mode is data register.
2967 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2968 * d10v-opc.c (pre_defined_registers): Declare.
2969 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2970 to pick a better name for the registers.
2972 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2974 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2975 operands for fexpand and fpmerge. From Christian Kuehnke
2976 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2978 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2980 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2981 print routine. Take new regnames and cpumask arguments.
2982 Kill the environment variable nonsense.
2983 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2984 (print_insn_alpha_vms): New function. Do VMS style regnames.
2985 * disassemble.c (disassembler): Test bfd flavour to pick
2986 between OSF and VMS routines. Default to OSF.
2988 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2990 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2991 * configure: Rebuild.
2992 * Makefile.in (install): Use @INSTALL_SHLIB@.
2994 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2996 * configure: (bfd_d10v_arch) Add new case.
2997 * configure.in: (bfd_d10v_arch) Add new case.
2998 * d10v-dis.c: New file.
2999 * d10v-opc.c: New file.
3000 * disassemble.c (disassembler) Add entry for d10v.
3002 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3004 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3005 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3007 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3009 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3010 distinguish between variants of the instruction set.
3011 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3012 distinguish between variants of the instruction set.
3014 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3016 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3017 the 8086 instruction set.
3018 * i386-dis.c: General cleanups. Make most things static. Add
3019 prototypes. Get rid of static variables aflags and dflags. Pass
3020 them as args (to almost everything).
3022 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3024 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3026 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3028 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3029 if the next arg is marked with SRC_IN_DST. Gross.
3031 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3032 we're looking for and find EXR.
3034 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3035 if we're looking for KBIT and we don't find it.
3037 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3040 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3041 3bit immediate operands.
3043 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3045 * Released binutils 2.7.
3047 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3048 <kkaempf@progis.ac-net.de>.
3050 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3052 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3054 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3056 * sparc-dis.c (print_insn_sparclite): New routine to print
3057 sparclite instructions.
3059 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3061 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3063 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3065 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3066 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3067 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3069 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3071 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3072 Use autoconf-set values.
3073 (docdir, oldincludedir): Removed.
3074 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3076 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3078 * alpha-opc.c: New file.
3079 * alpha-opc.h: Remove.
3080 * alpha-dis.c: Complete rewrite to use new opcode table.
3081 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3082 * configure: Rebuild with autoconf 2.10.
3083 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3084 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3086 (alpha-opc.o): New target.
3088 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3090 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3091 Set imm_added_to_rs1 even if the source and destination register
3094 * sparc-opc.c: Add some two operand forms of the wr instruction.
3096 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3098 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3101 * disassemble.c (disassembler): Handle H8/S.
3102 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3104 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3106 * sparc-opc.c: Add beq/teq as aliases for be/te.
3108 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3109 <sergei@msil.sps.mot.com>.
3111 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3113 * makefile.vms: New file.
3115 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3117 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3119 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3122 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3124 * i386-dis.c (OP_OFF): Call append_prefix.
3126 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3128 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3129 unsigned long to silence a warning from the Solaris PowerPC
3132 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3134 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3136 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3138 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3140 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3141 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3142 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3143 cpush, cpusha, cpull sparclet insns.
3145 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3147 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3149 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3151 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3152 Set F_FLOAT on other floating point instructions.
3154 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3156 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3158 (powerpc_opcodes): Add 860/821 specific SPRs.
3160 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3162 * configure.in: Permit --enable-shared to specify a list of
3163 directories. Set and substitute BFD_PICLIST.
3164 * configure: Rebuild.
3165 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3166 uses. Set to @BFD_PICLIST@.
3168 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3170 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3171 not "abs", which may be needed for the absolute in something
3172 like btst #0,@10:8. Print L_3 immediates separately from other
3173 immediates. Change ABSMOV reference to ABS8MEM.
3175 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3177 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3178 (current_arch_mask): New static global.
3179 (compute_arch_mask): New static function.
3180 (print_insn_sparc): Delete sparc_v9_p. New static local
3181 current_mach. Resort opcode table if current_mach changes.
3182 Generalize "insn not supported" test.
3183 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3184 Delete test for v9/!v9.
3185 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3187 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3188 (brfcx): Renamed to FBRX.
3189 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3190 coprocessor mnemonics are not supported on the sparclet).
3191 (condf): Renamed to CONDF.
3192 (SLCBCC2): Delete F_ALIAS flag.
3194 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3196 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3197 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3199 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3201 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3202 that the shared library version number is set correctly.
3204 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3206 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3207 Miles Bader <miles@gnu.ai.mit.edu>.
3208 * configure: Rebuild.
3210 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3212 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3215 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3217 * configure: Rebuild with autoconf 2.8.
3219 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3221 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3222 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3224 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3226 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3227 since they appear as targets in Makefile.in.
3228 * configure: Rebuild.
3230 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3232 * mpw-make.sed: Edit out shared library support bits.
3234 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3236 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3237 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3238 (sparc_opcodes): Add sparclet insns.
3239 (sparclet_cpreg_table): New static local.
3240 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3241 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3243 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3245 * i386-dis.c (index16): New static variable.
3246 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3248 (OP_indirE): Return result of OP_E.
3249 (OP_E): Check for 16 bit addressing mode, and disassemble
3250 correctly. Optimised 32 bit case a little. Don't print
3251 "(base,index,scale)" when sib specifies only an offset.
3253 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3255 * configure.in: Set and substitute SHLIB_DEP.
3256 * configure: Rebuild.
3257 * Makefile.in (SHLIB_DEP): New variable.
3258 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3259 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3260 COMMON_SHLIB, add them to piclist with appropriate modifications.
3261 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3262 here: just use piclist.
3264 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3266 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3267 (print_insn_sparc): Rewrite v9/not-v9 tests.
3268 (compare_opcodes): Likewise.
3269 * sparc-opc.c (MASK_<ARCH>): Define.
3270 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3271 (sparclet,v6notv9): Define.
3272 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3273 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3275 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3277 * configure.in: Call AC_PROG_CC before configure.host.
3278 * configure: Rebuild.
3280 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3282 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3284 * i386-dis.c (onebyte_has_modrm): New static array.
3285 (twobyte_has_modrm): New static array.
3286 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3288 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3290 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3293 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3295 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3298 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3301 m68010up, not just m68020up | cpu32.
3303 * Makefile.in (SONAME): New variable.
3304 ($(SHLINK)): Make a link to the transformed name, as well.
3305 (stamp-tshlink): New target.
3306 (install): Skip stamp-tshlink during install.
3308 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3310 * configure.in: Call AC_ARG_PROGRAM.
3311 * configure: Rebuild.
3312 * Makefile.in (program_transform_name): New variable.
3313 (install): Transform library name before installing it.
3315 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3317 * i960-dis.c (mem): Add HX dcinva instruction.
3319 Support for building as a shared library, based on patches from
3320 Alan Modra <alan@spri.levels.unisa.edu.au>:
3321 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3322 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3323 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3324 * configure: Rebuild.
3325 * Makefile.in (ALLLIBS): New variable.
3326 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3327 (COMMON_SHLIB, SHLINK): New variables.
3328 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3329 (STAGESTUFF): Remove variable.
3330 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3331 (stamp-piclist, piclist): New targets.
3332 ($(SHLIB), $(SHLINK)): New targets.
3333 ($(OFILES)): Depend upon stamp-picdir.
3334 (disassemble.o): Build twice if PICFLAG is set.
3335 (MOSTLYCLEAN): Add pic/*.o.
3336 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3337 (distclean): Remove pic and stamp-picdir.
3338 (install): Install shared libraries.
3339 (stamp-picdir): New target.
3341 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3343 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3344 Print unknown instruction as "unknown", rather than in hex.
3346 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3348 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3350 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3352 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3354 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3356 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3357 when necessary. From Ulrich Drepper
3358 <drepper@myware.rz.uni-karlsruhe.de>.
3360 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3362 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3363 sparc_num_opcodes. Update architecture enum values.
3364 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3365 (sparc_opcode_lookup_arch): New function.
3366 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3367 (sparc_opcodes): Add v9a shutdown insn.
3369 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3371 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3372 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3374 (print_insn_sparc64): Deleted.
3375 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3378 * sparc-opc.c (architecture_pname): Add v9a.
3380 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3382 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3383 incorrectly defined as 0x16 when it should be 0x15.
3384 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3385 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3386 excb (exception barrier) which is defined in the Alpha
3387 Architecture Handbook version 2.
3388 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3389 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3390 disassembled as or, for example.
3392 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3394 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3395 (_print_insn_mips): Change i from int to unsigned int.
3397 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3399 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3400 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3402 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3404 * i386-dis.c: Added Pentium Pro instructions.
3406 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3408 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3411 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3413 * sh-opc.h (sh_nibble_type): Added REG_B.
3414 (sh_arg_type): Added A_REG_B.
3415 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3417 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3419 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3421 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3423 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3425 * Makefile.in (distclean): Remove stamp-h. From Ronald
3426 F. Guilmette <rfg@monkeys.com>.
3428 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3430 From David Mosberger-Tang <davidm@azstarnet.com>:
3431 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3434 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3436 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3437 (sh_table): Added many SH3 opcodes.
3438 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3440 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3442 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3443 (subco,subco.): Mark this PPC, not PPCCOM.
3445 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3447 * configure: Rebuild with autoconf 2.7.
3449 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3451 * configure: Rebuild with autoconf 2.6.
3453 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3455 * configure.in: Sort list of architectures. Accept but do nothing
3456 for alliant, convex, pyramid, romp, and tahoe.
3458 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3460 * a29k-dis.c (print_special): Change num to unsigned int.
3462 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3464 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3467 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3469 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3470 * configure: Rebuilt.
3472 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3474 * configure.in: Add case for bfd_i860_arch.
3475 * configure: Rebuild.
3477 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3479 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3480 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3481 (NEXTDOUBLE): Likewise.
3482 (print_insn_m68k): Don't match fmoveml if there is more than one
3483 register in the list.
3484 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3486 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3488 * m68k-opc.c: Use #W rather than #w.
3489 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3491 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3493 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3494 and likewise for all the dbxx opcodes.
3496 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3498 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3500 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3502 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3503 the VR4100 specific instructions to the mips_opcodes structure.
3505 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3507 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3508 ugly Metrowerks bug in CW6, is fixed in CW7.
3510 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3512 * ppc-opc.c (whole file): Add flags for common/any support.
3514 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3516 * Makefile.in (BISON): Remove macro.
3517 (FLAGS_TO_PASS): Remove BISON.
3519 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3521 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3523 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3524 instructions that take no args by looking at the match mask.
3525 (print_insn_arg): Always print "%" before register names.
3526 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3527 [case '_']: Don't print "@#" before address.
3528 [case 'J']: Use "%s" as format string, not register name.
3529 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3531 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3533 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3536 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3538 From David Mosberger-Tang <davidm@azstarnet.com>
3540 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3541 (alpha_insn_set): added definitions for VAX floating point
3542 instructions (Unix compilers don't generate these, but handcoded
3543 assembly might still use them).
3545 * alpha-dis.c (print_insn_alpha): added support for disassembling
3546 the miscellaneous instructions in the Alpha instruction set.
3548 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3550 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3551 no longer create sysdep.h, sed ppc-opc.c to work around a
3552 serious Metrowerks C bug.
3553 * mpw-make.in: Remove.
3554 * mpw-make.sed: New file, used by mpw-configure to edit
3555 Makefile.in into an MPW makefile.
3557 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3559 * Makefile.in (maintainer-clean): New synonym for realclean.
3561 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3563 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3564 which use '0', '1', and '2' instead. Specify the proper size for
3565 a pmove immediate operand. Correct the pmovefd patterns to be
3566 moves to a register, not from a register.
3567 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3569 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3571 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3572 %psr, %wim, %tbr as F_NOTV9.
3574 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3576 * Makefile.in (Makefile): Just rebuild Makefile when running
3578 (config.h, stamp-h): New targets.
3579 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3580 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3581 rebuilding config.h.
3582 * configure: Rebuild.
3584 * mips-opc.c: Change unaligned loads and stores with "t,A"
3585 operands to use "t,A(b)".
3587 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3589 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3591 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3593 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3594 until 3 instead of until 2.
3596 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3598 * Makefile.in (ALL_CFLAGS): Define.
3599 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3600 (MOSTLYCLEAN): Add config.log.
3601 (distclean): Don't remove config.log.
3602 * configure.in: Substitute HDEFINES.
3603 * configure: Rebuild.
3605 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3607 * sh-opc.h (sh_arg_type): Add F_FR0.
3608 (sh_table, case fmac): Add F_FR0 as first argument.
3610 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3612 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3614 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3616 * sparc-dis.c: Remove all references to NO_V9.
3618 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3620 * aclocal.m4: Just include ../bfd/aclocal.m4.
3621 * configure: Rebuild.
3623 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3625 * sparc-dis.c (X_DISP19): Define.
3626 (print_insn, case 'G'): Use it.
3627 (print_insn, case 'L'): Sign extend displacement.
3629 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3631 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3632 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3633 host_makefile_frag or frags.
3634 * aclocal.m4: New file.
3635 * configure: Rebuild.
3636 * Makefile.in (INSTALL): Set to @INSTALL@.
3637 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3638 (INSTALL_DATA): Set to @INSTALL_DATA@.
3640 (AR_FLAGS): Set to rc rather than qc.
3641 (CC): Define as @CC@.
3642 (CFLAGS): Set to @CFLAGS@.
3643 (@host_makefile_frag@): Remove.
3644 (config.status): Remove dependency upon @frags@.
3646 * configure.in: ../bfd/config.bfd now just sets shell variables.
3647 Use them rather than looking through target Makefile fragments.
3648 * configure: Rebuild.
3650 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3652 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3654 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3656 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3657 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3660 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3661 (lookup_{name,value}): New functions.
3662 (prefetch_table): New static local.
3663 (sparc_{encode,decode}_prefetch): New functions.
3664 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3666 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3668 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3671 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3673 * sh-dis.c: Correct comment on first line of file.
3675 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3677 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3679 * sparc-opc.c (asi, membar): New static locals.
3680 (sparc_{encode,decode}_{asi,membar}): New functions.
3681 (sparc_opcodes, membar insn): Fix.
3682 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3683 Support decoding of membar masks.
3686 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3688 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3690 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3692 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3693 and likewise for the other branches. Add bhs as an alias for bcc,
3694 and likewise for the size variants. Add dbhs as an alias for
3697 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3699 * sh-opc.h (FP sts instructions): Update to match reality.
3701 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3703 * m68k-dis.c: (fpcr_names): Add % before all register names.
3704 (reg_names): Likewise.
3705 (print_insn_arg): Don't explicitly print % before register names.
3706 Add % before register names in static array names. In case 'r',
3707 print data registers as `@(Dn)', not `Dn@'. When printing a
3708 memory address, don't print @# before it.
3709 (print_indexed): Change base_disp and outer_disp from int to
3710 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3711 syntax. Sign extend 8 byte displacement correctly.
3712 (print_base): Print using MIT syntax. Print zpc when appropriate.
3713 Change parameter disp from int to bfd_vma.
3715 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3718 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3720 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3721 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3722 * sh-opc.h (sh_arg_type): Add new operand types.
3723 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3725 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3727 * Makefile.in (distclean): Remove generated file config.h.
3729 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3731 * Makefile.in (distclean): Remove generated file config.h.
3733 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3735 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3737 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3739 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3740 rather than numopcodes. Use m68k_opcodes rather than removed
3741 opcode function. Don't check F_ALIAS.
3742 (print_insn_arg): Change first parameter to be const char *.
3743 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3744 (m68k-opc.o): New target.
3745 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3746 * configure: Rebuild.
3748 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3750 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3751 (opcode_bits, opcode_hash_table): New variables.
3752 (opcodes_initialized): Renamed from opcodes_sorted.
3753 (build_hash_table): New function.
3754 (is_delayed_branch): Use hash table.
3755 (print_insn): Renamed from print_insn_sparc, made static.
3756 Build and use hash table. If !sparc64, ignore sparc64 insns,
3757 and vice-versa if sparc64.
3758 (print_insn_sparc, print_insn_sparc64): New functions.
3759 (compare_opcodes): Move sparc64 opcodes to end.
3760 Print commutative insns with constant second.
3761 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3763 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3765 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3766 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3767 avoids printing a delay slot in a delay slot.
3768 * sh-opc.h (sh_table): Fully bracket last entry.
3770 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3772 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3774 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3776 * configure.in: Get host_makefile_frag from ${srcdir}.
3778 * configure.in: Autoconfiscated. Check for string[s].h. Create
3779 config.h from config.in. Don't set up sysdep.h link.
3780 * sysdep.h: New file.
3781 * configure, config.in: New files, generated from configure.in.
3782 * Makefile.in: Updated to be processed autoconf-style.
3783 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3784 (Makefile): Depend on config.status.
3785 (config.status): New rule.
3786 * configure.bat: Update Makefile substitutions.
3788 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3790 * mips-opc.c (L1): Define.
3791 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3792 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3795 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3797 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3798 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3799 have multiple add units but only a single logical unit.
3801 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3802 shifted by 18, without any insertion or extraction function.
3803 (insert_cr, extract_cr): Remove.
3805 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3807 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3810 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3812 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3813 * sh-opc.h: Add copyright.
3815 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3817 * Makefile.in (crunch-m68k): Delete extra target accidentally
3818 checked in a while ago.
3820 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3822 * sh-opc.h (sh_table): Add SH3 support.
3824 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3826 * sh-opc.h: Added bsrf and braf.
3828 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3830 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3831 bogus [ls]fm{ea,fd} patterns.
3833 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3834 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3835 initialize it from memory. Make function static.
3836 (print_insn_{big,little}_arm): New functions.
3837 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3838 the correct endianness.
3840 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3842 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3845 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3847 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3848 17th, so that it builds again using GCC as the compiler.
3850 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3852 * mips-dis.c (print_insn_little_mips): Cast return value from
3853 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3854 expects an unsigned long, and that might be fewer words of
3855 argument storage (e.g., if bfd_vma is long long on a 32-bit
3857 (print_insn_big_mips): Likewise with bfd_getb32 value.
3858 (_print_insn_mips): Now static.
3860 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3862 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3863 gcc memory hog problem with initializer is fixed.
3865 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3867 Merge in support for Mac MPW as a host.
3868 (Old change descriptions retained for informational value.)
3870 * mpw-config.in (archname): Compute from the config.
3871 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3873 * mpw-config.in (target_arch): Compute from canonical target.
3874 (m68k, mips, powerpc, sparc): Add architectures.
3875 * mpw-make.in (disassemble.c.o): Add.
3876 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3878 * mpw-config.in (BFD_MACHINES): Set to a default value.
3879 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3881 * mpw-make.in (CSEARCH): Add extra-include to search path.
3883 * mpw-config.in (varargs.h): Don't create.
3884 (sysdep.h): Create using forward-include.
3885 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3887 * mpw-config.in: New file, MPW version of configure.in.
3888 * mpw-make.in: New file, MPW version of Makefile.in.
3890 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3892 * alpha-dis.c (print_insn_alpha): Put empty statement after
3895 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3897 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3898 (low_sign_extend): Likewise.
3899 (get_field): Delete unused function.
3900 (set_field, deposit_14, deposit_21): Likewise.
3902 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3904 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
3907 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
3909 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
3911 * alpha-opc.h (OSF_ASMCODE): define
3912 print pal-code names as defined in App C of the
3913 Alpha Architecture Reference Manual
3915 * alpha-dis.c: cleaned up output
3916 print stylized code forms as defined in App A.4.3 of the
3917 Alpha Architecture Reference Manual
3919 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3921 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3923 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3926 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3928 * m68k-dis.c (opcode): New function. Returns address of opcode
3929 table entry given index, even if the opcode table was split to
3930 work around gcc bugs.
3931 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3933 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3934 (reg_names): Now const.
3935 (print_insn_arg): Arrays cacheFieldName and names now const.
3936 (print_indexed): Array scales now const.
3938 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3940 * ppc-opc.c: Sort recently added instructions by minor opcode
3941 number within major opcode number.
3943 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3945 * hppa-dis.c: Include libhppa.h.
3947 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3949 * mips-opc.c: Change dli to use M_DLI, and add dla.
3951 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3953 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3955 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3957 * mips-opc.c: Add r4650 mul instruction.
3959 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3961 * mips-opc.c: Add uld and usd macros for unaligned double load and
3964 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3966 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3967 mfdcr, mtdcr, icbt, iccci.
3969 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3971 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3972 signed char fields to shorts, more portable.
3974 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3976 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3977 char fields as signed chars, since they may have negative values.
3979 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3981 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3982 (mycroft@netbsd.org).
3984 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3986 From "Logg, Ed" <elogg@ea.com>:
3987 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3988 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3991 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3993 * ppc-opc.c: Changes based on patch from David Edelsohn
3994 <edelsohn@mhpcc.edu>.
3995 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3998 (insert_tbr): New static function.
3999 (extract_tbr): New static function.
4000 (XFXFXM_MASK, XFXM): Define.
4001 (XSPRBAT_MASK, XSPRG_MASK): Define.
4002 (powerpc_opcodes): Add instructions to access special registers by
4003 name. Add mtcr and mftbu.
4005 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4007 * mips-opc.c (P3): Define.
4008 (mips_opcodes): Add mad and madu.
4010 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4012 * configure.in: Add W65 support.
4013 * disassemble.c: Likewise.
4014 * w65-opc.h, w65-dis.c: New files.
4016 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4018 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4021 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4023 * mips-opc.c: Add dli as a synonym for li.
4025 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4027 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4028 print something for reserved opcode values, even if it won't
4031 * mips-dis.c (_print_insn_mips): When initializing, shift right
4032 and mask, to avoid sign extension problems on the Alpha.
4034 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4037 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4039 * sh-opc.h (mov.l gbr): Get direction right.
4040 * sh-dis.c (print_insn_shx): New function.
4041 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4042 print opcodes with right byte order.
4044 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4046 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4047 to avoid conflicts with getopt.
4049 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4051 * hppa-dis.c (print_insn_hppa): Read the instruction using
4052 bfd_getb32, so that it works on a little endian or 64 bit host.
4053 Remove unused local variable op.
4055 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4057 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4058 addu does not work correctly if -mips3.
4060 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4062 * a29k-dis.c (print_special): Add special register names defined
4063 on 29030, 29040 and 29050.
4064 (print_insn): Handle new operand type 'I'.
4066 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4068 * Makefile.in (INSTALL): Use top level install.sh script.
4070 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4072 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4073 that it works on a little endian host.
4075 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4077 * configure.in: Use ${config_shell} when running config.bfd.
4079 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4081 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4083 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4085 * a29k-dis.c (print_insn): Print the opcode.
4087 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4089 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4091 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4093 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4095 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4097 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4098 which store a value into memory.
4100 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4102 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4103 * arm-dis.c, arm-opc.h: New files.
4105 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4107 * Makefile.in (ns32k-dis.o): Add dependency.
4108 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4109 string, not as array of chars.
4111 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4113 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4115 * sparc-opc.c: Added sparclite extended FP operations, and
4116 versions of v9 impdep* instructions permitting specification of
4119 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4121 * i960-dis.c (reg_names): Now const.
4122 (struct sparse_tabent): New type, copied from array type in mem
4124 (ctrl): Local static array ctrl_tab now const.
4125 (cobr): Local static array cobr_tab now const.
4126 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4127 static variable mem_tab no longer explicitly initialized. Changed
4128 mem_init to const array of struct sparse_tabent.
4129 (reg): Local static variable reg_tab no longer explicitly
4130 initialized. Changed reg_init to const array of struct
4132 (ea): Local static array scale_tab now const.
4134 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4137 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4139 * configure.bat: the disassember needs to be enabled for
4140 "objdump -d" to work in djgpp.
4142 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4144 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4145 (invalid_float): Enabled general version, doesn't require running
4146 on ns32k host. Changed to take char* argument, and test for
4147 explicitly specified sizes, instead of using sizeof() on host CPU
4149 (INVALID_FLOAT): Cast first argument.
4150 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4151 list_P032, list_M032): Now const.
4152 (optlist, list_search): Made appropriate arguments now point to
4154 (print_insn_arg): Changed static array of one-character-string
4155 pointers into a static const array of characters; fixed sprintf
4156 statement accordingly.
4158 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4160 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4161 from distribution. A ns32k-dis.c from a previous distribution has
4162 been brought up to date and supports the new interface.
4164 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4166 * configure.in: add bfd_ns32k_arch target support.
4168 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4169 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4171 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4173 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4176 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4178 * h8300-dis.c, mips-dis.c: Don't use true and false.
4180 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4182 * configure.in: Change --with-targets to --enable-targets.
4184 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4186 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4187 opcodes to the first instruction with that opcode, to speed
4188 disassembly of large files. From ralphc@pyramid.com (Ralph
4191 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4193 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4195 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4197 * configure.bat: update to latest makefile.in
4199 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4201 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4202 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4203 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4204 slot insn is in a delay slot.
4205 * z8k-opc.h: (resflg): Fix patterns.
4206 * h8500-opc.h Fix CR insn patterns.
4208 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4210 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4211 "cmpl" before POWER versions, so that gas -many uses them.
4213 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4215 * disassemble.c: New file.
4216 * Makefile.in (OFILES): Add disassemble.o.
4217 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4218 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4219 binutils/configure.in.
4221 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4222 opcode being examined.
4224 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4226 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4227 (insert_ral, insert_ram, insert_ras): New functions.
4228 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4229 RAS for store with update.
4231 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4233 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4234 (edelsohn@npac.syr.edu).
4236 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4238 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4241 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4243 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4245 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4247 * ppc-opc.c (powerpc_operands): The signedp field has been
4248 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4249 instead. Add new operand SISIGNOPT.
4250 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4251 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4252 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4255 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4257 * i386-dis.c (struct private): Renamed to dis_private. `private'
4258 is a reserved word for dynix cc.
4260 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4262 * configure.in: Change error message to refer to bfd/config.bfd
4263 rather than bfd/configure.in.
4265 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4267 * ppc-opc.c: Define POWER2 as short alias flag.
4268 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4271 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4273 * i960-dis.c (print_insn_i960): Don't read a second word for
4274 opcodes 0, 1, 2 and 3.
4276 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4278 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4280 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4282 * m68881-ext.c: Removed; no longer used.
4283 * Makefile.in: Changed accordingly.
4285 * m68k-dis.c (ext_format_68881): Don't declare.
4286 (print_insn_m68k): If an instruction uses place 'i', it uses at
4287 least four fixed bytes.
4288 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4289 extended float, convert to double using floatformat_to_double, not
4290 ieee_extended_to_double, and fetch the data before converting it.
4292 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4294 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4295 davidj@ICSI.Berkeley.EDU (David Johnson).
4297 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4299 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4300 PowerPC uses bdnz[l][a].
4302 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4304 * dis-buf.c, i386-dis.c: Include sysdep.h.
4306 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4308 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4310 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4311 by Motorola PowerPC 601 with PPC_OPCODE_601.
4312 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4313 Disassemble Motorola PowerPC 601 instructions as well as normal
4314 PowerPC instructions.
4316 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4318 * i960-dis.c (reg, mem): Just use a static array instead of
4321 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4323 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4324 condition name index if this is for a negated condition.
4326 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4327 Floating point format for 'H' operand is backwards from normal
4328 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4329 operands (fmpyadd and fmpysub), handle bizarre register
4330 translation correctly for single precision format.
4332 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4333 or 'I' operands if the next format specifier is 'M' (fcmp
4334 condition completer).
4336 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4338 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4339 single number giving a bitmask for the MB and ME fields of an M
4340 form instruction. Change NB to accept 32, and turn it into 0;
4341 also turn 0 into 32 when disassembling. Seperated SH from NB.
4342 (insert_mbe, extract_mbe): New functions.
4343 (insert_nb, extract_nb): New functions.
4344 (SC_MASK): Mask out SA and LK bits.
4345 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4346 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4347 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4348 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4349 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4350 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4351 (powerpc_macros): Define table of macro definitions.
4352 (powerpc_num_macros): Define.
4354 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4355 if PPC_OPERAND_NEXT is set.
4357 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4359 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4360 char. Retrieve contents using bfd_getl32 instead of shifting.
4362 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4364 * ppc-opc.c: New file. Opcode table for PowerPC, including
4365 opcodes for POWER (RS/6000).
4366 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4367 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4368 (CFILES): Add ppc-dis.c.
4369 (ppc-dis.o, ppc-opc.o): New targets.
4370 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4372 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4374 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4375 No space before 'u', 'f', or 'N'.
4377 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4379 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4380 farther than we should.
4382 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4384 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4386 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4388 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4390 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4391 needs it, to prevent reading past the end of a section.
4393 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4395 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4396 Removed t,A case for la; always use t,A(b) case.
4398 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4400 From Ted Lemen <mellon@pepper.ncd.com>
4401 * mips-dis.c (print_insn_arg): Handle 'k'.
4402 * mips-opc.c: Make cache use k, not t.
4404 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4406 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4407 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4408 FLOAT_FORMAT_CODE to put out floating point register names.
4410 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4412 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4414 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4416 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4418 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4420 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4421 larger than 32. Moved dsxx32 variants first for disassembler.
4423 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4425 * z8kgen.c, z8k-opc.h: Add full lda information.
4427 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4429 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4430 movb instructions. Any necessary space will be emitted by
4431 the code to handle nullification completers.
4433 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4435 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4437 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4439 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4440 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4442 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4444 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4446 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4448 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4449 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4451 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4453 * m88k-dis.c (m88kdis): comment change. Remove space after
4455 (printop): handle new arg types DEC and XREG for m88110.
4457 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4459 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4460 type for absolute branch addresses. Delete special
4461 "ble" and "be" code in 'W' operand code.
4463 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4465 * mips-opc.c: Set hazard information correctly for branch
4466 likely instructions.
4468 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4470 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4471 info->fprintf_func for printing and info->print_address_func for
4474 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4476 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4478 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4480 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4481 Corrected second case of "b" for disassembler.
4483 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4485 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4486 to BFD swapping routines to correspond to BFD name changes.
4488 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4490 * mips-opc.c: Change div machine instruction to be z,s,t rather
4491 than s,t. Change div macro to be d,v,t rather than d,s,t.
4492 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4493 rem and remu which generates only the corresponding div
4494 instruction. This is for compatibility with the MIPS assembler,
4495 which only generates the simple machine instruction when an
4496 explicit destination of $0 is used.
4497 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4499 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4501 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4502 WR_31 hazard for bal, bgezal, bltzal.
4504 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4506 * hppa-dis.c (print_insn_hppa): Use print function
4507 from within the disassemble_info, not fprintf_filtered.
4509 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4511 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4512 Law, law@cs.utah.edu.)
4514 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4516 * mips-opc.c ("absu"): Removed.
4519 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4521 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4522 Changed hazard information to distinguish between memory load
4523 delays and coprocessor load delays.
4525 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4527 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4529 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4531 * configure.in: Don't pass cpu to config.bfd.
4533 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4535 * m88k-dis.c (m88kdis): Make class unsigned.
4537 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4539 * alpha-dis.c (print_insn_alpha): One branch format case was
4540 missing the instruction name.
4542 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4544 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4545 Add the arch-specific auxiliary files.
4546 (OFILES): Remove the arch-specific auxiliary files
4547 and use BFD_MACHINES instead of DIS_LIBS.
4548 * configure.in: Set BFD_MACHINES based on --with-targets option.
4550 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4552 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4555 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4557 * sparc-opc.c: Change CONST to const to deal with gcc
4558 -Dconst=__const -traditional.
4560 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4562 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4563 coprocessor instructions out of #if 0, and made them use new
4566 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4568 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4570 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4572 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4573 instruction, for use by the disassembler.
4575 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4576 hand-coded sign extensions that depended on 32-bit host ints.
4577 FIXME, we still depend on big-endian host bitfield ordering.
4578 (sparc_print_insn): Set the insn_info_valid field, and the
4579 other fields that describe the instruction being printed.
4581 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4583 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4584 `jmp' instead of just one of them.
4586 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4588 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4589 (fput_fp_reg_r): Renamed from fput_reg_r.
4590 (fput_fp_reg): New function.
4591 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4593 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4595 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4597 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4599 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4601 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4602 don't output a space.
4604 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4606 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4608 * mips-opc.c: New file, containing opcode table from
4609 ../include/opcode/mips.h.
4610 * Makefile.in: Add it.
4612 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4614 * m88k-dis.c: New file, moved in from gdb and changed to use the
4615 new dis-asm.h disassembler interface.
4616 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4617 (m88k-dis.o): New target.
4619 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4621 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4622 argument string const char * to correspond to opcode/mips.h.
4624 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4626 * mips-dis.c: Updated to account for name changes in new version
4628 * Makefile.in: Added header file dependencies.
4630 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4632 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4634 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4636 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4637 extend, rather than shifts.
4639 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4641 * Makefile.in: Undo 15 June change.
4643 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4645 * m68k-dis.c (print_insn_arg): Change return value to byte count
4647 * m68k-dis.c: Re-write to detect invalid operands before
4648 printing anything, so we can handle this the same way we
4649 handle invalid opcodes.
4651 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4653 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4655 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4657 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4660 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4662 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4664 * configure.in: Do make sysdep.h link.
4665 * Makefile.in: Search ../include. Don't search ../bfd.
4667 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4669 Changes from Jeff Law, law@cs.utah.edu:
4670 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4671 Do not print a space before the completers specified by
4674 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4676 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4677 defined, since gdb has been fixed.
4679 Changes from Jeff Law, law@cs.utah.edu:
4680 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4681 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4682 be a *disassemble_info, not a *FILE.
4683 * hppa-dis.c: Support 'd', '!', and 'a'.
4684 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4685 * hppa-dis.c: Delete cases which are no longer needed.
4687 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4689 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4691 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4693 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4696 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4698 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4699 * configure.in: No longer need to configure to get sysdep.h.
4701 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4703 * Patches from Jeffrey Law <law@cs.utah.edu>.
4704 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4705 templates for 1.1 FP computational instructions.
4707 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4709 * h8500-dis.c (print_insn_h8500): Address argument is type
4711 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4714 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4715 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4717 * sparc-dis.c (compare_opcodes): Move static declaration to
4720 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4722 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4723 instruction, remove unimp hack from 'l' argument.
4725 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4727 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4730 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4732 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4733 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4736 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4738 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4739 arrays of string pointers to 2-d arrays of chars, to save
4742 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4744 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4745 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4747 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4749 * hppa-dis.c: New file from Utah, adapted to new disassembler
4751 * Makefile.in: Include it.
4753 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4755 * sh-dis.c, sh-opc.h: New files.
4757 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4759 * alpha-dis.c, alpha-opc.h: New files.
4761 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4763 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4766 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4768 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4770 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4772 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4775 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4777 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4778 and double percent signs a few places.
4780 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4782 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4783 Use info->print_address_func not print_address.
4785 * dis-buf.c (generic_print_address): New function.
4787 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4789 * Makefile.in: Add sparc-dis.c.
4790 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4792 Add `add' instruction to the set that get checked
4793 for a preceding `sethi' in order to print an absolute address.
4794 * (print_insn): Disassembly prefers real instructions.
4795 (is_delayed_branch): Speed up.
4796 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4797 Still missing some float ops, and needs testing.
4798 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4799 F_ALIAS. Use printf, not fprintf, when not passing a file
4801 (compare_opcodes): Check that identical instructions have
4802 identical opcodes, complain otherwise.
4805 * Include reg_names.
4807 Use dis-asm.h/read_memory_func interface.
4809 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4811 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4812 deliberately return non-zero to setjmp from longjmp. Otherwise
4813 this code fails to compile.
4815 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4817 * m68k-dis.c: Fix prototype for fetch_arg().
4819 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4821 * dis-buf.c: New file, for new read_memory_func interface.
4822 Makefile.in (OFILES): Include it.
4823 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4824 Use new read_memory_func interface.
4826 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4828 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4829 * h8500-opc.h: Fix couple of opcodes.
4831 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4833 * Makefile.in: add dvi & installcheck targets
4835 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4837 * Makefile.in: Update for h8500-dis.c.
4839 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4841 * h8500-dis.c, h8500-opc.h: New files
4843 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4845 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4846 ../include/dis-asm.h.
4847 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4848 and ../gdb/m68k-pinsn.c).
4849 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4850 and ../gdb/i386-pinsn.c).
4851 * m68881-ext.c: New file. Moved definition of
4852 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4853 * Makefile.in: Adjust for new files.
4854 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4855 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4856 can be dis-assembled.
4858 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4860 * mips-dis.c (print_insn_arg): Now returns void.
4862 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4864 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4865 files that use the macros.
4867 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4869 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4870 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4871 (CFILES): Added mips-dis.c.
4873 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4875 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4876 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4878 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4880 * Makefile.in: Improve *clean rules.
4881 * configure.in: Allow a default host.
4883 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4885 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4886 files include other sysdep files
4888 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4890 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4892 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4894 * configure.in: For host support, use ../bfd/configure.host
4895 so it stays in sync with the ../bfd/hosts database.
4897 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4899 * configure.in: use cpu-vendor-os triple instead of nested cases
4901 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4903 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4904 *always* the wrong one.
4906 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4908 * z8kgen.c: added copyright info
4910 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4912 * z8k-dis.c (unparse_instr): prettier tabs
4913 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4915 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4917 * configure.in: Add ncr* configuration.
4918 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4919 picayune ANSI compilers happy.
4921 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4923 * configure.in (i386): Make i386 and i486 synonymous for now.
4924 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4926 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4928 * Makefile.in (install): Fix typo.
4930 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4932 * Makefile.in (make): Remove obsolete crud.
4933 (sparc-opc.o): Avoid Sun Make VPATH bug.
4935 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4937 * Makefile.in: since there are no SUBDIRS, remove rule and
4938 references of subdir_do.
4940 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4942 * Makefile.in (install): Get the library name right here too.
4943 Don't install bfd.h, since it's unrelated to this library. No
4944 subdirs to recurse into, either.
4945 (CFILES): The source file has a .c suffix, not .o.
4947 * sparc-opc.c: New file, moved from BFD.
4948 * Makefile.in (OFILES): Build it.
4950 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4952 * z8k-dis.c: fixed forward refferences of some declarations.
4954 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4956 * Makefile.in: get the name of the library right
4958 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4960 * z8k-dis.c: knows how to disassemble z8k stuff
4961 * z8k-opc.h: new file full of z8000 opcodes
4965 version-control: never