1 2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
3 * mips-opc.c: Clean up a few whitespace issues, and sort a
4 few entries understanding that 'x' follows 'w' in the alphabet.
6 2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
7 Ed Satterthwaite <ehs@broadcom.com>
9 * mips-opc.c: Add support for SB-1 MDMX subset and extensions.
11 2002-05-31 Alan Modra <amodra@bigpond.net.au>
13 * Makefile.am: Run "make dep-am".
14 * Makefile.in: Regenerate.
15 * po/POTFILES.in: Regenerate.
17 2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
18 Ed Satterthwaite <ehs@broadcom.com>
20 * mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
21 and 'Z' formats, for MDMX.
22 (mips_isa_type): Add MDMX instructions to the ISA
23 bit mask for bfd_mach_mipsisa64.
24 * mips-opc.c: Add support for MDMX instructions.
27 * mips-dis.c: Update copyright years to include 2002.
29 2002-05-30 Diego Novillo <dnovillo@redhat.com>
31 * d10v-opc.c (d10v_opcodes): `btsti' does not modify its
34 2002-05-28 Kuang Hwa Lin <kuang@sbcglobal.net>
36 * configure.in: Add DLX configuraton support.
37 * configure: Regenerate.
38 * Makefile.am: Add DLX configuraton support.
39 * Makefile.in: Regenerate.
40 * disassemble.c: Add DLX support.
41 * dlx-dis.c: New file.
43 2002-05-25 Alan Modra <amodra@bigpond.net.au>
45 * Makefile.am (sh-dis.lo): Don't put make commands in deps.
46 * Makefile.in: Regenerate.
47 * arc-dis.c: Use #include "" instead of <> for local header files.
48 * m68k-dis.c: Likewise.
50 Wed May 22 20:11:51 2002 J"orn Rennecke <joern.rennecke@superh.com>
52 * Makefile.am (sh-dis.lo): Compile with @archdefs@.
53 * Makefile.in: regenerate.
55 * sh-dis.c (print_insn_sh): If coff and bfd_mach_sh, use arch_sh4
58 2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
60 * mips-opc.c (mips_builtin_opcodes): Add drol, dror macros.
62 Fri May 17 14:26:44 2002 J"orn Rennecke <joern.rennecke@superh.com>
64 * disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
65 * sh-dis.c (LITTLE_BIT): Delete.
66 (print_insn_sh, print_insn_shl): Deleted.
67 (print_insn_shx): Renamed to
68 (print_insn_sh). No longer static. Handle SHmedia instructions.
69 Use info->endian to determine endianness.
70 * sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
71 (print_insn_sh64x): No longer static. Renamed to
72 (print_insn_sh64). Removed pfun_compact and endian arguments.
73 If we got an uneven address to indicate SHmedia, adjust it.
74 Return -2 for SHcompact instructions.
76 2002-05-17 Alan Modra <amodra@bigpond.net.au>
78 * acinclude.m4 (AM_INSTALL_LIBBFD): Fake to fool autotools.
79 * configure.in: Invoke AM_INSTALL_LIBBFD.
80 * Makefile.am (install-data-local): Move to..
81 (install_libopcodes): .. New target.
82 (uninstall_libopcodes): Likewise.
83 (install-bfdlibLTLIBRARIES): Likewise.
84 (uninstall-bfdlibLTLIBRARIES): Likewise.
87 (lib_LTLIBRARIES): Rename to bfdlib_LTLIBRARIES.
88 * aclocal.m4: Regenerate.
89 * configure: Regenerate.
90 * Makefile.in: Regenerate.
92 2002-05-15 Nick Clifton <nickc@cambridge.redhat.com>
94 * fr30-asm.c: Regenerate.
95 * fr30-desc.c: Regenerate.
96 * fr30-dis.c: Regenerate.
97 * m32r-asm.c: Regenerate.
98 * m32r-desc.c: Regenerate.
99 * m32r-dis.c: Regenerate.
100 * openrisc-asm.c: Regenerate.
101 * openrisc-desc.c: Regenerate.
102 * openrisc-dis.c: Regenerate.
103 * xstormy16-asm.c: Regenerate.
104 * xstormy16-desc.c: Regenerate.
105 * xstormy16-dis.c: Regenerate.
107 2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
109 * mips-dis.c (is_newabi): EABI is not a NewABI.
111 2002-05-13 Jason Thorpe <thorpej@wasabisystems.com>
113 * configure.in (shle-*-*elf*): Include sh64 support.
114 * configure: Regenerate.
116 2002-04-28 Jason Thorpe <thorpej@wasabisystems.com>
118 * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
119 (print_insn_mode): Print some basic info about floating point values.
121 2002-05-09 Anton Blanchard <anton@samba.org>
123 * ppc-opc.c: Add "tlbiel" for POWER4.
125 2002-05-07 Graydon Hoare <graydon@redhat.com>
127 * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
128 than just most-recently-opened.
130 2002-05-01 Alan Modra <amodra@bigpond.net.au>
132 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
134 2002-04-24 Christian Groessler <chris@groessler.org>
136 * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
137 bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
139 (z8k_lookup_instr): CLASS_IGNORE case added.
140 (output_instr): Don't print hex codes, they are already
142 (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case
143 fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
144 (unparse_instr): Fix base and indexed addressing disassembly:
145 The index is inside the brackets.
146 * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
147 (opt): Fix shift left/right arithmetic/logical byte defines:
148 The high byte of the immediate word is ignored by the
150 Fix n parameter of ldm opcodes: The opcode contains (n-1).
151 (args): Fix "n" entry.
152 (toks): Add "nim4" and "iiii" entries.
153 * z8k-opc.h: Regenerated with new z8kgen.c.
155 2002-04-24 Nick Clifton <nickc@cambridge.redhat.com>
157 * po/id.po: New Indonesian translation.
158 * configure.in (ALL_LIGUAS): Add id.po
159 * configure: Regenerate.
161 2002-04-17 matthew green <mrg@redhat.com>
163 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
165 2002-04-04 Alan Modra <amodra@bigpond.net.au>
167 * dep-in.sed: Cope with absolute paths.
168 * Makefile.am (dep.sed): Subst TOPDIR.
170 * Makefile.in: Regenerate.
171 * ppc-opc.c: Whitespace.
172 * s390-dis.c: Fix copyright date.
174 2002-03-23 matthew green <mrg@redhat.com>
176 * ppc-opc.c (vmaddfp): Fix operand order.
178 2002-03-21 Alan Modra <amodra@bigpond.net.au>
180 * Makefile.am: Run "make dep-am".
181 * Makefile.in: Regenerate.
183 2002-03-21 Anton Blanchard <anton@samba.org>
185 * ppc-opc.c: Add optional field to mtmsrd.
186 (MTMSRD_L, XRLARB_MASK): Define.
188 Mon Mar 18 21:10:43 CET 2002 Jan Hubicka <jh@suse.cz>
190 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
192 (print_insn) Likewise.
193 (putop): Fix handling of 'E'
194 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
197 2002-03-18 Nick Clifton <nickc@cambridge.redhat.com>
199 * po/fr.po: Updated version.
201 2002-03-16 Chris Demetriou <cgd@broadcom.com>
203 * mips-opc.c (M3D): Tweak comment.
204 (mips_builtin_op): Add comment indicating that opcodes of the
205 same name must be placed together in the table, and sort
206 the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
207 "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
209 2002-03-16 Nick Clifton <nickc@cambridge.redhat.com>
211 * Makefile.am: Tidy up sh64 rules.
212 * Makefile.in: Regenerate.
214 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
216 * mips-dis.c: Update copyright years.
218 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
220 * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
221 bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
222 comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
223 indicate that they should dissassemble all applicable
225 * mips-opc.c: Add support for MIPS-3D instructions.
226 (M3D): New definition.
228 * mips-opc.c: Update copyright years.
230 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
232 * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
234 2002-03-15 Chris Demetriou <cgd@broadcom.com>
236 * mips-dis.c (is_newabi): Fix ABI decoding.
238 2002-03-14 Chris G. Demetriou <cgd@broadcom.com>
240 * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
241 and bfd_mach_mipsisa64 cases to match the rest.
243 2002-03-13 Nick Clifton <nickc@cambridge.redhat.com>
245 * po/fr.po: Updated version.
247 2002-03-13 Alan Modra <amodra@bigpond.net.au>
249 * ppc-opc.c: Add optional `L' field to tlbie.
250 (XRTLRA_MASK): Define.
252 2002-03-06 Chris Demetriou <cgd@broadcom.com>
254 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
257 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
259 2002-03-05 Paul Koning <pkoning@equallogic.com>
261 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
262 for float opcodes that take float operands. Add alternate
263 names (xxxD vs. xxxF) for float opcodes.
264 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
265 (print_foperand): New function to handle float opcode operands.
266 (print_insn_pdp11): Use print_foperand to disassemble float ops.
268 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
272 2002-02-26 Brian Gaeke <brg@dgate.org>
274 * Makefile.am (install-data-local): Install dis-asm.h.
276 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
278 * configure.in (LINGUAS): Add de.po.
279 * configure: Regenerate.
280 * po/de.po: New file.
282 2002-02-25 Alan Modra <amodra@bigpond.net.au>
284 * ppc-dis.c (powerpc_dialect): Handle power4 option.
285 * ppc-opc.c (insert_bdm): Correct description of "at" branch
286 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
287 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
288 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
289 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
290 (PPCCOM32, PPCCOM64): Delete.
291 (NOPOWER4, POWER4): Define.
292 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
293 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
294 are enabled for power4 rather than ppc64.
296 2002-02-20 Tom Rix <trix@redhat.com>
298 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
300 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
302 * s390-dis.c (init_disasm): Use renamed architecture defines.
304 2002-02-19 matthew green <mrg@redhat.com>
306 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
309 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
311 * po/tr.po: Updated translation.
313 2002-02-15 Richard Henderson <rth@redhat.com>
315 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
318 2002-02-15 Richard Henderson <rth@redhat.com>
320 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
323 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
325 * po/da.po: Updated translation.
327 2002-02-12 Graydon Hoare <graydon@redhat.com>
329 * cgen-asm.in (parse_insn_normal): Change call from
330 @arch@_cgen_parse_operand to cd->parse_operand, to
331 facilitate CGEN_ASM_INIT_HOOK doing useful work.
333 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
335 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
338 2002-02-11 Alan Modra <amodra@bigpond.net.au>
340 * Makefile.am: "make dep-am".
341 * Makefile.in: Regenerate.
342 * aclocal.m4: Regenerate.
343 * config.in: Regenerate.
344 * configure: Regenerate.
346 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
348 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
349 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
351 * configure: Regenerate.
353 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
355 * cgen-dis.c: Add prototypes for count_decodable_bits
356 and add_insn_to_hash_chain.
358 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
360 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
361 * configure: Rebuilt.
363 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
365 * or32-opc.c: Fix compile time warning messages.
366 * or32-dis.c: Fix compile time warning messages.
368 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
371 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
372 * sh64-opc.c: Regenerate.
373 2001-03-13 DJ Delorie <dj@redhat.com>
374 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
375 purpose is more obvious.
376 * sh64-opc.c (shmedia_table): Ditto.
377 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
378 (print_insn_shmedia): Ditto.
379 2001-03-12 DJ Delorie <dj@redhat.com>
380 * sh64-opc.c: Adjust comments to reflect reality: replace bits
381 3:0 with zeros (not "reserved"), replace "rrrrrr" with
382 "gggggg" for two-operand floating point opcodes. Remove
384 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
385 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
386 Correct printing of .byte:s. Return number of printed bytes or
388 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
389 to next four-byte-alignment if insn or data is not aligned.
390 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
391 * sh64-dis.c: Update comments and fix comment formatting.
392 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
393 Abort instead of setting length to 0.
394 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
395 crange_bsearch_cmpl, sh64_get_contents_type,
396 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
397 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
398 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
399 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
400 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
401 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
402 address with same prefix as SHcompact.
403 In the disassembler, use a .cranges section for linked executables.
404 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
405 and update for using structure in info->private_data.
406 (struct sh64_disassemble_info): New.
407 (is_shmedia_p): Delete.
408 (crange_qsort_cmpb): New function.
409 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
410 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
411 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
412 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
413 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
414 pair. Display addresses for linked executables only.
415 (print_insn_sh64x_media): Initialize info->private_data by calling
416 init_sh64_disasm_info.
417 (print_insn_sh64x): Ditto. Find out type of contents by calling
418 sh64_contents_type_disasm. Display data regions using ".long" and
419 ".byte" similar to unrecognized opcodes.
420 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
421 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
422 information in section flags before considering symbols. Don't
423 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
424 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
425 matching $target $canon_targets instead of looking at the
426 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
427 * configure: Regenerate.
428 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
429 * sh64-opc.c (shmedia_creg_table): New.
430 * sh64-opc.h (shmedia_creg_info): New type.
431 (shmedia_creg_table): Declare.
432 * sh64-dis.c (creg_name): New function.
433 (print_insn_shmedia): Use it.
434 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
435 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
436 print_insn_sh64l if little-endian.
437 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
438 (print_insn_sh64l): New.
439 (print_insn_sh64x): New.
440 (print_insn_sh64x_media): New.
441 (print_insn_sh64): Break out code to print_insn_sh64x and
442 print_insn_sh64x_media.
443 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
444 * sh64-opc.h: New file
445 * sh64-opc.c: New file
446 * sh64-dis.c: New file
447 * Makefile.am: Add sh64 targets.
448 (HFILES): Add sh64-opc.h.
449 (CFILES): Add sh64-opc.c and sh64-dis.c.
450 (ALL_MACHINES): Add sh64 files.
451 * Makefile.in: Regenerate.
452 * configure.in: Add support for sh64 to bfd_sh_arch.
453 * configure: Regenerate.
454 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
455 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
457 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
458 * po/POTFILES.in: Regenerate.
459 * po/opcodes.pot: Regenerate.
461 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
463 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
465 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
467 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
469 2002-02-01 Alan Modra <amodra@bigpond.net.au>
471 * Makefile.am: Run "make dep-am"
472 * Makefile.in: Regenerate.
474 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
476 * or32-dis.c: New file.
477 * or32-opc.c: New file.
478 * configure.in: Add support for or32.
479 * configure: Regenerate.
480 * Makefile.am: Add support for or32.
481 * Makefile.in: Regenerate.
482 * disassemble.c: Add support for or32.
483 * po/POTFILES.in: Regenerate.
484 * po/opcodes.pot: Regenerate.
486 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
488 * configure: Regenerated.
490 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
492 * po/fr.po: Updated version.
494 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
496 * po/es.po: Updated version.
498 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
500 * po/da.po: New version.
502 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
504 * po/da.po: New file: Spanish translation.
505 * configure.in (ALL_LINGUAS): Add da.
506 * configure: Regenerate.
508 2002-01-22 Graydon Hoare <graydon@redhat.com>
510 * fr30-asm.c: Regenerate.
511 * fr30-desc.c: Likewise.
512 * fr30-desc.h: Likewise.
513 * fr30-dis.c: Likewise.
514 * fr30-ibld.c: Likewise.
515 * fr30-opc.c: Likewise.
516 * fr30-opc.h: Likewise.
517 * m32r-asm.c: Likewise.
518 * m32r-desc.c: Likewise.
519 * m32r-desc.h: Likewise.
520 * m32r-dis.c: Likewise.
521 * m32r-ibld.c: Likewise.
522 * m32r-opc.c: Likewise.
523 * m32r-opc.h: Likewise.
524 * m32r-opinst.c: Likewise.
525 * openrisc-asm.c: Likewise.
526 * openrisc-desc.c: Likewise.
527 * openrisc-desc.h: Likewise.
528 * openrisc-dis.c: Likewise.
529 * openrisc-ibld.c: Likewise.
530 * openrisc-opc.c: Likewise.
531 * openrisc-opc.h: Likewise.
532 * xstormy16-desc.c: Likewise.
534 2002-01-22 Richard Henderson <rth@redhat.com>
536 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
539 2002-01-22 Alan Modra <amodra@bigpond.net.au>
541 * Makefile.am: Run "make dep-am".
542 * Makefile.in: Regenerate.
543 * opcodes/po/POTFILES.in: Regenerate.
545 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
547 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
548 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
550 2002-01-18 Keith Walker <keith.walker@arm.com>
552 * arm-opc.h (arm_opcodes): Add bxj instruction.
554 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
556 * po/opcodes.pot: Regenerate.
557 * po/fr.po: Regenerate.
558 * po/sv.po: Regenerate.
559 * po/tr.po: Regenerate.
561 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
563 * po/tr.po: Import new version.
565 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
567 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
568 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
571 2002-01-10 matthew green <mrg@redhat.com>
573 * xstormy16-asm.c: Regenerate.
574 * xstormy16-desc.c: Likewise.
575 * xstormy16-desc.h: Likewise.
576 * xstormy16-dis.c: Likewise.
577 * xstormy16-opc.c: Likewise.
578 * xstormy16-opc.h: Likewise.
580 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
582 * po/es.po: New file: Spanish translation.
583 * configure.in (ALL_LINGUAS): Add es.
584 * configure: Regenerate.
586 2001-12-31 Jeffrey A Law (law@redhat.com)
588 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
589 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
590 Always emit a space after 'H'.
592 2001-12-18 matthew green <mrg@redhat.com>
594 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
596 2001-12-17 Richard Henderson <rth@redhat.com>
598 * alpha-opc.c (unop): Encode with RB as $sp.
600 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
602 * Makefile.am: Add support for xstormy16.
603 * Makefile.in: Regenerate.
604 * configure.in: Add support for xstormy16.
605 * configure: Regenerate.
606 * disassemble.c: Add support for xstormy16.
607 * xstormy16-asm.c: New generated file.
608 * xstormy16-desc.c: New generated file.
609 * xstormy16-desc.h: New generated file.
610 * xstormy16-dis.c: New generated file.
611 * xstormy16-ibld.c: New generated file.
612 * xstormy16-opc.c: New generated file.
613 * xstormy16-opc.h: New generated file.
615 2001-12-06 Richard Henderson <rth@redhat.com>
617 * alpha-opc.c (alpha_opcodes): Add wh64en.
619 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
621 * d10v-opc.c (d10v_predefined_registers): Remove warnings
622 introduced in Nov 29's patch.
624 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
627 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
630 * d10v-opc.c (RSRC_NOSP): New macro.
631 (d10v_operands): Add it.
632 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
634 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
636 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
637 (RSRC_SP): New macro.
638 (d10v_operands): Add it.
639 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
641 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
643 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
644 Also, break out of the loop as soon as an instruction has been
647 2001-11-17 matthew green <mrg@redhat.com>
649 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
651 2001-11-15 Alan Modra <amodra@bigpond.net.au>
653 * po/POTFILES.in: Regenerate.
655 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
656 (insert_bat, extract_bat, insert_bba, extract_bba,
657 insert_bd, extract_bd, insert_bdm, extract_bdm,
658 insert_bdp, extract_bdp, valid_bo,
659 insert_bo, extract_bo, insert_boe, extract_boe,
660 insert_ds, extract_ds, insert_de, extract_de,
661 insert_des, extract_des, insert_li, extract_li,
662 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
663 insert_nb, extract_nb, insert_nsi, extract_nsi,
664 insert_ral, insert_ram, insert_ras,
665 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
666 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
667 (extract_bd, extract_bdm, extract_bdp,
668 extract_ds, extract_des,
669 extract_li, extract_nsi): Implement sign extension without conditional.
670 (insert_bdm, extract_bdm,
671 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
672 (extract_bdm, extract_bdp): Correct 32 bit validation.
673 (AT1_MASK, AT2_MASK): Define.
674 (BBOAT_MASK): Define.
675 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
676 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
677 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
678 (PPCCOM32, PPCCOM64): Define.
679 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
680 and add new patterns to implement 64 bit branches with hints. Move
681 booke instructions so they match before ppc64.
683 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
684 64 bit default targets, and parse "32" and "64" in options.
686 (print_insn_powerpc): Pass dialect to operand->extract.
688 2001-11-14 Dave Brolley <brolley@redhat.com>
690 * cgen-dis.c (count_decodable_bits): New function.
691 (add_insn_to_hash_chain): New function.
692 (hash_insn_array): Call add_insn_to_hash_chain.
693 (hash_insn_list): Call add_insn_to_hash_chain.
694 * m32r-dis.c: Regenerated.
695 * fr30-dis.c: Regenerated.
697 2001-11-14 Andreas Jaeger <aj@suse.de>
699 * i386-dis.c (print_insn): Use x86-64 as option.
701 2001-11-14 Alan Modra <amodra@bigpond.net.au>
703 * disassemble.c (disassembler): Call print_insn_i386.
704 * i386-dis.c (SUFFIX_ALWAYS): Define.
705 (struct dis_private): Add orig_sizeflag.
706 (print_insn_i386): Make it a wrapper, calling..
707 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
708 warning without using volatile by moving orig_sizeflag to priv,
709 and removing inbuf. Parse disassembler_options.
710 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
712 (putop): Remove #ifdef SUFFIX_ALWAYS.
714 2001-11-11 Timothy Wall <twall@alum.mit.edu>
716 * tic54x-dis.c: Use revised opcode structure. Export opcode
718 (has_lkaddr): Don't forget about Lmem insns.
719 * tic54x-opc.c: Add emulation trap. Parallel table now uses
720 standard opcode templates.
722 2001-11-13 Zack Weinberg <zack@codesourcery.com>
724 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
725 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
726 category instead of Ew.
728 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
730 * m68k-opc.c: Fix definitions of wddata[bwl].
732 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
734 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
735 fit in the buffer, try to match the empty keyword.
737 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
739 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
740 * fr30-ibld.c: Regenerate.
741 * m32r-ibld.c: Regenerate.
742 * openrisc-ibld.c: Regenerate.
744 2001-11-04 Chris Demetriou <cgd@broadcom.com>
746 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
748 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
750 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
751 * configure: Regernate.
752 * po/fr.po: New file.
753 * po/sv.po: New file.
754 * po/tr.po: New file.
756 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
758 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
761 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
763 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
765 * Makefile.in: Regenerate.
766 * mmix-dis.c, mmix-opc.c: New files.
768 2001-10-29 Kazu Hirata <kazu@hxi.com>
770 * d30v-dis.c: Fix a comment typo.
772 2001-10-23 Chris Demetriou <cgd@broadcom.com>
774 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
775 "bltzall" as writing GPR 31 (since they do).
777 * mips-dis.c (print_insn_arg): Calculate info->target
779 (print_insn_mips): Fill in instruction info.
780 (print_mips16_insn_arg): Remove unneded variable 'val'.
781 Removed duplicated instruction target calculations,
782 calculate once and print that result. Use same idiom for
783 masking the jump segment bits as is used in print_insn_arg.
785 2001-10-20 Alan Modra <amodra@bigpond.net.au>
787 * ppc-opc.c (CT): Make it an optional operand.
789 2001-10-17 Chris Demetriou <cgd@broadcom.com>
791 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
792 SB-1 binaries include instructions specific to the SB-1.
793 * mips-opc.c (SB1): New definition.
794 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
795 "recip.ps", "rsqrt.ps", and "sqrt.ps".
797 2001-10-17 matthew green <mrg@redhat.com>
799 * ppc-opc.c (STRM): New AltiVec operand.
800 (XDSS): New AltiVec instruction form.
801 (mtvscr): Correct operand list.
802 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
804 2001-10-17 Alan Modra <amodra@bigpond.net.au>
806 * po/POTFILES.in: Regenerate.
808 2001-10-13 matthew green <mrg@redhat.com>
810 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
811 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
812 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
814 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
816 * cgen-ibld.in: Include safe-ctype.h in preference to
818 * cgen-asm.in: Include safe-ctype.h in preference to
819 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
820 TOLOWER instead of tolower.
821 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
822 string elements in constructed regular expression.
823 * fr30-asm.c: Regenerate.
824 * fr30-desc.c: Regenerate.
825 * fr30-ibld.c: Regenerate.
826 * m32r-asm.c: Regenerate.
827 * m32r-desc.c: Regenerate.
828 * m32r-ibld.c: Regenerate.
829 * openrisc-asm.c: Regenerate.
830 * openrisc-desc.c: Regenerate.
831 * openrisc-ibld.c: Regenerate.
832 * po/opcodes.pot: Regenerate.
834 2001-10-12 matthew green <mrg@redhat.com>
836 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
837 instruction field instruction/extraction functions for new BookE
838 DE form instructions.
839 (CT): New macro for CT field in an X form instruction.
840 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
842 (PPC64): Don't include PPC_OPCODE_PPC.
843 (403): New opcode macro for PPC403 processors.
844 (BOOKE): New opcode macro for BookE processors.
845 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
846 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
847 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
848 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
849 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
850 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
851 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
852 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
853 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
854 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
855 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
856 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
857 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
858 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
860 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
861 for a disassembler option of `booke', `booke32' or `booke64' to enable
862 BookE support in the disassembler.
864 2001-10-12 John Healy <jhealy@redhat.com>
866 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
867 for the length when extracting the base part of the insn.
869 2001-10-09 Bruno Haible <haible@clisp.cons.org>
871 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
872 regular expression. Fix some formatting problems.
873 * fr30-asm.c: Regenerate.
874 * openrisc-asm.c: Regenerate.
875 * m32r-asm.c: Regenerate.
877 2001-10-09 Christian Groessler <cpg@aladdin.de>
879 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
880 of indirect register memory accesses to be same format the
883 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
885 * sh-opc.h: Fix encoding of least significant nibble of the
886 DSP single data transfer instructions.
888 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
891 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
893 * cgen-asm.in: Fix compile time warning messages in generated
895 * cgen-dis.in: The same.
896 * cgen-ibld.in: The same.
897 * fr30-asm.c: Regenerate.
898 * fr30-desc.c: Regenerate.
899 * fr30-dis.c: Regenerate.
900 * fr30-ibld.c: Regenerate.
901 * fr30-opc.c: Regenerate.
902 * m32r-asm.c: Regenerate.
903 * m32r-desc.c: Regenerate.
904 * m32r-dis.c: Regenerate.
905 * m32r-ibld.c: Regenerate.
906 * m32r-opc.c: Regenerate.
907 * m32r-opinst.c Regenerate.
908 * openrisc-asm.c: Regenerate.
909 * openrisc-desc.c: Regenerate.
910 * openrisc-dis.c: Regenerate.
911 * openrisc-ibld.c: Regenerate.
912 * openrisc-opc.c: Regenerate.
913 * openrisc-opc.h: Regenerate.
914 * Makefile.in: Regenerate.
915 * po/POTFILES.in: Regenerate.
916 * po/opcodes.pot: Regenerate.
918 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
920 * arm-opc.h (arm_opcodes): Add cirrus insns.
922 * arm-dis.c (print_insn_arm): Add 'I' case.
924 2001-10-03 Alan Modra <amodra@bigpond.net.au>
926 * po/POTFILES.in: Regenerate.
927 * configure: Regenerate.
929 2001-10-02 Alan Modra <amodra@bigpond.net.au>
931 * Makefile.am (Makefile): Depend on bfd/configure.in.
933 * Makefile.in: Regenerate.
935 2001-09-30 John Healy <jhealy@redhat.com>
937 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
938 calls to cgen_get_insn_value and cgen_put_insn_value calls.
939 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
941 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
943 * Makefile.am: Update dependencies with "make dep-am".
944 * Makefile.in: Regenerate.
946 2001-09-26 Alan Modra <amodra@bigpond.net.au>
948 * arc-dis.c: Formatting fixes.
949 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
951 2001-09-21 Bruno Haible <haible@clisp.cons.org>
953 * arc-dis.c: Don't include <ctype.h>.
954 * openrisc-desc.c: Likewise.
955 * openrisc-ibld.c: Likewise.
957 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
959 * fr30-opc.c: Fix compile time warning messages.
960 * i370-opc.c: Fix compile time warning messages.
961 * i960-dis.c: Fix compile time warning messages.
962 * m32r-asm.c: Fix compile time warning messages.
963 * m32r-desc.c: Fix compile time warning messages.
964 * m32r-dis.c: Fix compile time warning messages.
965 * m32r-ibld.c: Fix compile time warning messages.
966 * m32r-opc.c: Fix compile time warning messages.
967 * m32r-opinst.c: Fix compile time warning messages.
968 * ns32k-dis.c: Fix compile time warning messages.
969 * openrisc-asm.c: Fix compile time warning messages.
970 * openrisc-desc.c: Fix compile time warning messages.
971 * openrisc-dis.c: Fix compile time warning messages.
972 * openrisc-ibld.c: Fix compile time warning messages.
973 * openrisc-opc.c: Fix compile time warning messages.
974 * pdp11-dis.c: Fix compile time warning messages.
975 * tic54x-dis.c: Fix compile time warning messages.
976 * v850-opc.c: Fix compile time warning messages.
977 * vax-dis.c: Fix compile time warning messages.
978 * w65-opc.h: Fix compile time warning messages.
979 * z8k-opc.h: Fix compile time warning messages.
980 * z8kgen.c: Fix compile time warning messages.
982 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
984 * arm-dis.c: Fix compile time warning messages.
985 * cgen-asm.c: Fix compile time warning messages.
986 * cgen-dis.c: Fix compile time warning messages.
987 * cris-dis.c: Fix compile time warning messages.
988 * d10v-dis.c: Fix compile time warning messages.
989 * fr30-asm.c: Fix compile time warning messages.
990 * fr30-desc.c: Fix compile time warning messages.
991 * fr30-dis.c: Fix compile time warning messages.
992 * fr30-ibld.c: Fix compile time warning messages.
994 2001-09-18 Bruno Haible <haible@clisp.cons.org>
996 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
997 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
998 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
999 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
1001 (cgen_keyword_add): Use ISALNUM instead of isalnum.
1002 (hash_keyword_name): Use TOLOWER instead of tolower.
1003 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1004 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1006 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
1007 * fr30-desc.c: Don't include <ctype.h>.
1008 * fr30-ibld.c: Likewise.
1009 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
1010 (load_insn_classes, parse_resource_users, load_depfile): Use
1011 ISSPACE instead of isspace.
1012 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1013 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1015 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
1016 * m32r-desc.c: Don't include <ctype.h>.
1017 * m32r-ibld.c: Likewise.
1018 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1019 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1021 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
1023 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
1025 * Makefile.am: Add rules and dependencies to create the s/390 opcode
1026 table out of s390-opc.txt automatically.
1027 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
1028 * s390-mkopc.c (dumpTable): Change output to create a complete file.
1029 * s390-opc.c: New improved opcode format macros and remove the
1030 pregenerated opcode table.
1031 * s390-opc.txt: Adapt to new improved opcode format macros.
1033 2001-09-14 David Schleef <ds@schleef.org>
1035 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
1037 2001-09-04 Alan Modra <amodra@bigpond.net.au>
1039 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
1040 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
1042 2001-08-31 Eric Christopher <echristo@redhat.com>
1043 Jason Eckhardt <jle@redhat.com>
1045 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
1046 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
1049 2001-08-31 Andreas Jaeger <aj@suse.de>
1051 * tic54x-opc.c: Add default initializers to avoid warnings.
1053 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
1054 * arc-ext.c: Likewise.
1056 2001-08-28 matthew green <mrg@redhat.com>
1058 * ppc-opc.c (icbt): Order correctly.
1060 2001-08-27 David Edelsohn <dje@watson.ibm.com>
1061 Torbjorn Granlund <tege@swox.com>
1063 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
1065 (insert_ds): Complain if not a multiple of 4.
1067 (XSYNC_MASK): Define.
1068 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
1069 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
1071 2001-08-26 Andreas Jaeger <aj@suse.de>
1073 * h8500-opc.h: Add default initializers to h8500_table to shut up
1076 2001-08-25 Andreas Jaeger <aj@suse.de>
1078 * tic54x-dis.c: Add unused attributes where needed.
1080 * z8k-dis.c (output_instr): Add unused attribute.
1082 * h8300-dis.c: Add missing prototypes.
1083 (bfd_h8_disassemble): Make static.
1085 * cris-dis.c: Add missing prototype.
1086 * h8500-dis.c: Likewise.
1087 * m68hc11-dis.c: Likewise.
1088 * pj-dis.c: Likewise.
1089 * tic54x-dis.c: Likewise.
1090 * v850-dis.c: Likewise.
1091 * vax-dis.c: Likewise.
1092 * w65-dis.c: Likewise.
1093 * z8k-dis.c: Likewise.
1095 * d10v-dis.c: Add missing prototype.
1096 (dis_long): Remove unused variable.
1097 (dis_2_short): Likewise.
1099 * sh-dis.c: Add missing prototypes.
1100 * v850-opc.c: Likewise.
1101 Add unused attributes where needed.
1103 * ns32k-dis.c: Add missing prototypes.
1104 (bit_extract_simple): Remove unused variable.
1106 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
1108 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
1109 branch instructions for gcc 3.0.
1110 * opcodes/s390-opc.txt: Likewise.
1112 2001-08-21 Andreas Jaeger <aj@suse.de>
1114 * i960-dis.c: Add parameters for prototypes
1115 (ctrl): Add unused attributes.
1117 (put_abs): Likewise.
1119 * mips-dis.c: Add missing prototypes.
1120 * a29k-dis.c: Likewise.
1121 * arc-dis.c: Likewise.
1122 * ia64-opc.c: Likewise.
1124 * s390-dis.c: Add missing prototypes.
1125 (init_disasm): Remove unused attribute since the parameter is
1128 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1130 * mips-opc.c (M1): Define. Reformatted Code.
1131 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
1134 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
1136 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
1137 the corresponding non-likely insn is in MIPS I.
1139 2001-08-13 Kazu Hirata <kazu@hxi.com>
1141 * mcore-dis.c: Fix formatting.
1142 * mips-dis.c: Likewise.
1143 * pj-dis.c: Likewise.
1144 * z8k-dis.c: Likewise.
1146 2001-08-12 Richard Henderson <rth@redhat.com>
1148 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
1149 to *VALUEP. Regenerate all cgen files.
1151 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
1153 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
1155 * mips-opc.c (G6): Undefine.
1156 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
1157 as the first "move" alternative.
1159 2001-08-10 Andreas Jaeger <aj@suse.de>
1161 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
1163 * configure: Regenerate.
1165 2001-08-10 Alan Modra <amodra@bigpond.net.au>
1167 * ppc-opc.c: Revert 2001-08-08.
1169 2001-08-09 Alan Modra <amodra@bigpond.net.au>
1171 * dis-buf.c (generic_strcat_address): Add missing prototype.
1172 #if 0 the functions as it is unused.
1174 2001-08-08 Alan Modra <amodra@bigpond.net.au>
1176 1999-10-25 Torbjorn Granlund <tege@swox.com>
1177 * ppc-opc.c: Include "bfd.h".
1178 (powerpc_operands): Add new field for reloc type.
1180 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1182 * mips-dis.c (print_insn_arg): Don't use software integer registers
1183 for coprocessor registers.
1184 (get_mips_isa): Removed.
1185 (is_newabi): New function, checks if NewABI is used.
1186 (_print_insn_mips): Get distinction between old ABI and new ABI right.
1188 2001-08-01 Christian Groessler <cpg@aladdin.de>
1190 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
1191 get stderr definition.
1192 (internal, gas): Removed warnings.
1193 (gas): Create a correct final entry for created array.
1194 * z8k-opc.h: Recreated with new z8kgen.
1196 2001-07-28 Kazu Hirata <kazu@hxi.com>
1198 * i386-dis.c: Fix formatting.
1200 2001-07-28 Matthias Kramm <kramm@quiss.org>
1202 * i386-dis.c: Change formatting conventions for architecture
1203 i386:intel to better match the format of various intel i386
1204 assemblers, like nasm, tasm or masm.
1206 2001-07-24 Alan Modra <amodra@bigpond.net.au>
1208 * Makefile.am: Update dependencies with "make dep-am".
1209 * Makefile.in: Regenerate
1211 2001-07-24 Kazu Hirata <kazu@hxi.com>
1213 * alpha-dis.c: Fix formatting.
1214 * cris-dis.c: Likewise.
1215 * d10v-dis.c: Likewise.
1216 * d30v-dis.c: Likewise.
1217 * m10300-dis.c: Likewise.
1218 * tic54x-dis.c: Likewise.
1220 2001-07-23 Kazu Hirata <kazu@hxi.com>
1222 * m68k-dis.c: Fix formatting.
1223 * pj-dis.c: Likewise.
1224 * s390-dis.c: Likewise.
1225 * z8k-dis.c: Likewise.
1227 2001-07-21 Chris Demetriou <cgd@broadcom.com>
1229 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
1230 into the rest of the surrounding definitions.
1232 2001-07-18 Alan Modra <amodra@bigpond.net.au>
1234 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1235 for lgdt, lidt, sgdt, sidt.
1237 2001-07-13 Philip Blundell <philb@gnu.org>
1239 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1241 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1243 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1245 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1246 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1247 to verify if it is worth parsing the insn as insn "x". Also update
1248 error message when insn is not a recognized format of the insn vs
1249 when the insn is completely unrecognized.
1251 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1253 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1255 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1256 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1258 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1260 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1261 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1262 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1264 2001-07-05 Ben Elliston <bje@redhat.com>
1266 * Makefile.am (CPUDIR): Define.
1267 (stamp-m32r): Update dependencies.
1268 (stamp-fr30): Ditto.
1269 (stamp-openrisc): Ditto.
1270 * Makefile.in: Regenerate.
1272 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1274 * ppc-opc.c: Fix encoding of 'clf' instruction.
1276 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1278 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1280 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1282 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1283 * cgen-opc.c (cgen_keyword_add): Ignore special first
1284 character when building nonalpha_chars field.
1286 2001-06-24 Ben Elliston <bje@redhat.com>
1288 * m88k-dis.c: Format to conform to GNU coding standards.
1290 2001-06-23 Andreas Jaeger <aj@suse.de>
1292 * disassemble.c (disassembler_usage): Add unused attribute.
1294 2001-06-22 Eric Christopher <echristo@redhat.com>
1296 * mips-opc.c: Move prefx to start of the table.
1298 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1300 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1303 2001-06-22 Pauli <pauli@moreton.com.au>
1305 * m68k-opc.c: Add wdebug instruction.
1307 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1309 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1311 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1313 * cgen-asm.c (cgen_parse_keyword): When looking for the
1314 boundaries of a keyword, allow any special characters
1315 that are actually in one of the allowed keyword.
1316 * cgen-opc.c (cgen_keyword_add): Add any special characters
1317 to the nonalpha_chars field.
1319 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1321 * s390-opc.c: Add lgh instruction.
1322 * s390-opc.txt: Likewise.
1324 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1326 * i386-dis.c: Group function prototypes in one place.
1327 (FLOATCODE): Redefine as 1.
1328 (USE_GROUPS): Redefine as 2.
1329 (USE_PREFIX_USER_TABLE): Redefine as 3.
1330 (X86_64_SPECIAL): Define as 4.
1331 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1332 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1333 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1334 (dis386): New table combining above four tables.
1335 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1336 (dis386_twobyte): New table combining above two tables.
1337 (x86_64_table): New table to handle x86_64.
1339 (float_mem_att, float_mem_intel): Delet.
1340 (float_mem): New table combining above two tables.
1341 (print_insn_i386): Modify for above.
1342 (dofloat): Likewise.
1343 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1344 Return 0 on success, 1 if no valid alternative.
1345 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1346 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1347 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1348 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1350 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1351 (OP_I64): If not 64-bit mode, call OP_I.
1352 OP_OFF64): If not 64-bit mode, call OP_OFF.
1353 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1354 'ignore'/'ignored' to 'bytemode'.
1356 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1358 * configure.in: Sort 'ta' case statement.
1359 * configure: Regenerate.
1361 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1363 (disx86_64_att): Likewise.
1364 (dis386_twobyte_att): Likewise.
1365 (print_insn_i386): Don't print branch hints as a prefix.
1366 (putop): 'H' macro prints branch hints.
1367 (get64): Kill compile warnings.
1369 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1371 * sh-opc.h (sh_table): Don't use empty initializers.
1373 2001-06-06 Christian Groessler <cpg@aladdin.de>
1375 * z8k-dis.c: Fix formatting.
1376 (unpack_instr): Remove unused cases in switch statement. Add
1377 safety abort() in default case.
1378 (unparse_instr): Add safety abort() in default case.
1380 2001-06-06 Peter Jakubek <pjak@snafu.de>
1382 * m68k-dis.c (print_insn_m68k): Fix typo.
1383 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1384 mcf (ColdFire) div, rem and moveb instructions.
1386 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1388 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1389 (cond_jump_mode, loop_jcxz_mode): Define.
1390 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1391 appropriate, and 'F' suffix to loop insns.
1392 (disx86_64_att): Likewise.
1393 (dis386_twobyte_att): Likewise.
1394 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1395 Output data size prefix for long conditional jumps. Output cs and
1397 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1398 (OP_J): Don't make PREFIX_DATA used.
1400 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1402 * sh-opc.h (sh_table): Complete last element entry to avoid
1405 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1407 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1409 2001-05-23 Alan Modra <amodra@one.net.au>
1411 * arc-opc.c: Whitespace changes.
1413 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1415 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1418 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1420 * cgen-dis.in (extract_normal): Complete support for min<base case.
1422 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1424 * mips-dis.c (INSNLEN): Rename MAXLEN.
1425 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1426 (print_insn_arg): Remove $ prefix of register names.
1427 (set_mips_isa_type): Remove.
1428 (mips_isa_type): New function.
1429 (get_mips_isa): New Function.
1430 (print_insn_mips): Rename _print_insn_mips.
1431 (_print_insn_mips): New function, contains code which was
1432 duplicated in print_insn_big_mips and print_insn_little_mips.
1433 (print_insn_big_mips): Moved code to _print_insn_mips.
1434 (print_insn_little_mips): Likewise.
1435 (print_mips16_insn_arg): Remove $ prefix of register names.
1436 Print error message before abort.
1438 2001-05-14 J.T. Conklin <jtc@redback.com>
1440 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1441 simplified mnemonics used for setting PPC750-specific special
1444 2001-05-12 H.J. Lu <hjl@gnu.org>
1446 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1449 2001-05-12 Peter Targett <peter.targett@arccores.com>
1451 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1452 register to r/w. Formatting fixes throughout file.
1454 2001-05-12 Alan Modra <amodra@one.net.au>
1456 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1458 (twobyte_has_modrm): Update table.
1459 (need_modrm): Give it file scope.
1460 (MODRM_CHECK): Define.
1461 (dofloat): Use MODRM_CHECK.
1466 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1468 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1469 even at end of a section.
1470 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1471 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1473 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1475 * disassemble.c (disassembler_usage): Remove unused attribute.
1477 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1479 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1481 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1483 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1484 assume incoming buffer already has the base insn loaded. Handle
1485 smaller-than-base instructions for variable-length case.
1487 2001-05-04 Alan Modra <amodra@one.net.au>
1489 * i386-dis.c (Ev, Ed): Remove duplicate define.
1492 (OP_XS): New function.
1493 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1495 (dis386_twobyte_intel): Likewise.
1496 (prefix_user_table): Use MS for maskmovq operand.
1498 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1500 * Makefile.am: Add OpenRISC target.
1501 * Makefile.in: Regenerated.
1503 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1505 * configure.in (bfd_openrisc_arch): Add target.
1506 * configure: Regenerated.
1508 * openrisc-asm.c: New file.
1509 * openrisc-desc.c: Likewise.
1510 * openrisc-desc.h: Likewise.
1511 * openrisc-dis.c: Likewise.
1512 * openrisc-ibld.c: Likewise.
1513 * openrisc-opc.c: Likewise.
1514 * openrisc-opc.h: Likewise.
1516 2001-04-24 Christian Groessler <cpg@aladdin.de>
1518 * z8k-dis.c: add names of control registers (ctrl_names);
1519 (seg_length): provides instruction length fixup for segmented
1520 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1521 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1522 (unparse_intr): handle CLASS_PR, print addresses without '#'
1523 * z8k-opc.h: re-created with new z8kgen
1524 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1525 entries for ldctl/ldctlb instruction
1527 2001-04-06 Andreas Jaeger <aj@suse.de>
1529 * i386-dis.c: Add ffreep instruction.
1531 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1533 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1535 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1537 * i386-dis.c (PREGRP25): Define.
1538 (dis386_twobyte_att): Use here in place of "movntq" entry.
1539 (dis386_twobyte_intel): Likewise.
1540 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1542 (dis386_twobyte_att): Use here.
1543 (dis386_twobyte_intel): Likewise.
1544 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1545 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1546 (prefix_user_table): Cosmetic changes to "bad" entries.
1548 2001-03-23 Nick Clifton <nickc@redhat.com>
1550 * mips-opc.c: Remove extraneous whitespace.
1551 * mips-dis.c: Remove extraneous whitespace.
1553 2001-03-22 Ben Elliston <bje@redhat.com>
1555 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1556 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1557 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1558 to allay a compiler warning.
1560 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1562 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1563 (dis386_twobyte_intel): Likewise.
1564 (twobyte_has_modrm): Set entry for paddq, psubq.
1566 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1568 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1569 determination via CGEN_COMPUTE_MACH.
1570 * fr30-desc.c: Regenerate.
1571 * fr30-dis.c: Regenerate.
1572 * fr30-opc.h: Regenerate.
1573 * m32r-desc.c: Regenerate.
1574 * m32r-dis.c: Regenerate.
1575 * m32r-opc.h: Regenerate.
1576 * m32r-opinst.c: Regenerate.
1578 2001-03-20 H.J. Lu <hjl@gnu.org>
1580 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1581 * configure: Rebuild.
1583 2001-03-19 Jim Wilson <wilson@redhat.com>
1585 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1586 notestr if larger than xsect.
1587 (in_class): Handle format M5.
1588 * ia64-asmtab.c: Regnerate.
1590 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1592 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1593 has more than one byte left to read.
1595 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1597 * s390-opc.c: Add new opcodes. Smooth out formatting.
1598 * s390-opc.txt: Add new opcodes.
1600 2001-03-06 Nick Clifton <nickc@redhat.com>
1602 * arm-dis.c (print_insn_thumb): Compute destination address
1603 of BLX(1) instruction by taking bit 1 from PC and not from bit
1606 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1608 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1609 so command line switches will work.
1611 2001-03-05 Dave Brolley <brolley@redhat.com>
1613 * fr30-asm.c: Regenerate.
1614 * fr30-desc.c: Regenerate.
1615 * fr30-desc.h: Regenerate.
1616 * fr30-dis.c: Regenerate.
1617 * fr30-ibld.c: Regenerate.
1618 * fr30-opc.c: Regenerate.
1619 * fr30-opc.h: Regenerate.
1620 * m32r-asm.c: Regenerate.
1621 * m32r-desc.c: Regenerate.
1622 * m32r-desc.h: Regenerate.
1623 * m32r-dis.c: Regenerate.
1624 * m32r-ibld.c: Regenerate.
1625 * m32r-opc.c: Regenerate.
1626 * m32r-opc.h: Regenerate.
1627 * m32r-opinst.c: Regenerate.
1629 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1631 * m68k-opc.c: fix cpushl according to Motorola. Enable
1632 bunch of instructions for Coldfire 5407 and add all new.
1634 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1636 * configure.in (BFD_VERSION): Do without grep.
1637 * configure: Regenerate.
1638 * Makefile.am: Run "make dep-am".
1639 * Makefile.in: Regenerate.
1641 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1643 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1644 * ia64-asmtab.c: Regenerate.
1646 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1648 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1649 separate variants: one for IMM22 and the other for IMM14.
1650 * ia64-asmtab.c: Regenerate.
1652 2001-02-21 Greg McGary <greg@mcgary.org>
1654 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1656 2001-02-20 H.J. Lu <hjl@gnu.org>
1658 * Makefile.am (ia64-ic.tbl): Remove the target.
1659 (ia64-raw.tbl): Likewise.
1660 (ia64-waw.tbl): Likewise.
1661 (ia64-war.tbl): Likewise.
1662 (ia64-asmtab.c): Generate it in the source directory.
1663 * Makefile.in: Regenerated.
1665 2001-02-18 lars brinkhoff <lars@nocrew.org>
1667 * Makefile.am: Add PDP-11 target.
1668 * configure.in: Likewise.
1669 * disassemble.c: Likewise.
1670 * pdp11-dis.c: New file.
1671 * pdp11-opc.c: New file.
1673 2001-02-14 Jim Wilson <wilson@redhat.com>
1675 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1676 * ia64-asmtab.c: Regenerate.
1678 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1680 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1684 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1686 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1687 the following instruction not of the jump itself for the jump
1689 (print_mips16_insn_arg): Likewise.
1691 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1693 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1695 * Makefile.in: Regenerate.
1697 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1699 * Makefile.am: Add linux target for S/390.
1700 * Makefile.in: Likewise.
1701 * configure.in: Likewise.
1702 * disassemble.c: Likewise.
1703 * s390-dis.c: New file.
1704 * s390-mkopc.c: New file.
1705 * s390-opc.c: New file.
1706 * s390-opc.txt: New file.
1708 2001-02-05 Jim Wilson <wilson@redhat.com>
1710 * ia64-asmtab.c: Revert 2000-12-16 change.
1712 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1714 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1715 * m32r-desc.h: Regenerate.
1717 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1719 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1720 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1722 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1724 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1726 2001-01-13 Nick Clifton <nickc@redhat.com>
1728 * disassemble.c: Remove spurious white space.
1730 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1732 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1735 2001-01-11 Peter Targett <peter.targett@arccores.com>
1737 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1738 * Makefile.am (C_FILES): Add arc-ext.c.
1739 (ALL_MACHINES) Add arc-ext.lo.
1740 (INCLUDES) Add opcode directory to list.
1741 New dependency entry for arc-ext.lo.
1742 * disassemble.c (disassembler): Correct call to
1743 arc_get_disassembler.
1744 * arc-opc.c: New update for ARC, including full base
1745 instructions for ARC variants.
1746 * arc-dis.h, arc-dis.c: New update for ARC, including
1747 extensibility functionality.
1748 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1750 2001-01-10 Jan Hubicka <jh@suse.cz>
1752 * i386-dis.c (PREGRP15 - PREGRP24): New.
1753 (dis386_twobyt): Add SSE2 instructions.
1754 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1755 (twobyte_uses_f3_prefix): ... this one.
1756 (grps): Add SSE instructions.
1757 (prefix_user_table): Add two new slots; add SSE2 instructions.
1758 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1759 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1760 to prefix_user_table.
1761 (OP_E): Accept mfence and lfence as well.
1762 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1763 (OP_XMM): Support REX extensions.
1767 2001-01-09 Nick Clifton <nickc@redhat.com>
1769 * arm-dis.c (print_insn): Set pc to zero for instructions with
1770 a reloc associated with them.
1772 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1774 * cgen-asm.in (parse_insn_normal): Changed syn to be
1775 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1776 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1777 to '\0' to use 0 instead.
1778 * cgen-dis.in (print_insn_normal): Ditto.
1779 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1781 2001-01-05 Jan Hubicka <jh@suse.cz>
1783 * i386-dis.c: Add x86_64 support.
1784 (rex): New static variable.
1785 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1786 (USED_REX): New macro.
1787 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1788 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1789 (OP_REG, OP_OFF): Declare.
1790 (get64, get32, get32s): New functions.
1791 (r??_reg): New constants.
1792 (dis386_att): Change templates of instruction implicitly promoted
1793 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1795 (dis386_intel): Likewise.
1796 (dixx86_64_att): New table based on dis386_att.
1797 (dixx86_64_intel): New table based on dis386_intel.
1798 (names64, names8rex): New global variable.
1799 (names32, names16): Add extended registers.
1800 (prefix_user_t): Recognize rex prefixes.
1801 (prefix_name): Print REX prefixes nicely.
1802 (op_riprel): New global variable.
1803 (start_pc): Set type to bfd_vma.
1804 (print_insn_i386): Detect the 64bit mode and use proper table;
1805 move ckprefix after initializing the buffer; output unused rex prefixes;
1806 output information about target of RIP relative addresses.
1807 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1808 (print_operand_value): New function.
1809 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1810 REX prefix and new modes.
1811 (get64, get32s): New.
1812 (get32): Return bfd_signed_vma type.
1813 (set_op): Initialize the op_riprel.
1814 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1816 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1818 cgen-dis.in (read_insn): Use bfd_get_bits()
1820 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1822 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1823 (hash_insn_list): Likewise
1824 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1825 (extract_1): Use bfd_get_bits().
1826 (extract_normal): Apply sign extension to both extraction
1828 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1829 (cgen_put_insn_value): Use bfd_put_bits()
1831 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1833 * cgen-asm.in (parse_insn_normal): Print better error message for
1834 instructions with missing operands.
1836 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1838 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1840 2000-12-16 Nick Clifton <nickc@redhat.com>
1842 * Makefile.in: Regenerate.
1843 * aclocal.m4: Regenerate.
1844 * config.in: Regenerate.
1845 * configure.in: Add spacing.
1846 * configure: Regenerate.
1847 * ia64-asmtab.c: Regenerate.
1848 * po/opcodes.pot: Regenerate.
1850 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1852 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1853 error messages over later parse-time ones.
1855 2000-12-12 Jim Wilson <wilson@redhat.com>
1857 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1859 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1860 (print_dependency_table): Print NULL if semantics field not set.
1861 (insert_opcode_dependencies): Mark cmp parameter as unused.
1862 (print_main_table): Use fprintf_vma to print long long fields.
1863 (main): Mark argv paramter as unused. Convert to old style definition.
1864 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1865 * ia64-asmtab.c: Regnerate.
1867 2000-12-09 Nick Clifton <nickc@redhat.com>
1869 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1872 * fr30-dis.c: Regenerate.
1874 2000-12-08 Peter Targett <peter.targett@arccores.com>
1876 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1877 * Makefile.am (C_FILES): Add arc-ext.c.
1878 (ALL_MACHINES) Add arc-ext.lo.
1879 (INCLUDES) Add opcode directory to list.
1880 New dependency entry for arc-ext.lo.
1881 * disassemble.c (disassembler): Correct call to
1882 arc_get_disassembler.
1883 * arc-opc.c: New update for ARC, including full base
1884 instructions for ARC variants.
1885 * arc-dis.h, arc-dis.c: New update for ARC, including
1886 extensibility functionality.
1887 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1889 2000-12-03 Chris Demetriou cgd@sibyte.com
1891 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1892 MOD_HILO, and MOD_LO macros.
1894 * mips-opc.c (M1, M2): Delete.
1895 (mips_builtin_opcodes): Remove all uses of M1.
1897 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1898 instructions take "G" format second operands and use the
1900 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1902 Delete "sel" code operands from mfc1 and mtc1.
1903 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1906 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1907 Chris Demetriou cgd@sibyte.com
1909 * mips-opc.c (mips_builtin_opcodes): Finish additions
1910 for MIPS32 support, and clean up existing entries for
1911 aesthetics, consistency with the MIPS32 ISA, and
1912 with consistency the rest of the table.
1914 2000-12-01 Nick Clifton <nickc@redhat.com>
1916 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1919 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1921 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1922 specifiers. Update 'B' for new constant names, and remove
1924 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1925 near the top of the array, so they are disassembled properly.
1926 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1927 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1928 specifier. Add 'H' format specifier variants for "mfc1,"
1929 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1930 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1931 "wait" variant which uses 'J' operand specifier.
1933 * mips-dis.c (set_mips_isa_type): Update to use
1934 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1935 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1936 * mips-opc.c (I32): New constant for instructions added in
1939 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1941 * mips-dis.c (set_mips_isa_type): Add cases for
1942 bfd_mach_mips5 and bfd_mach_mips64.
1943 * mips-opc.c (I64): New definitions.
1945 * mips-dis.c (set_mips_isa_type): Add case for
1948 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1950 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1951 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1952 Initialize variable dc to NULL.
1953 (print_insn_shx): Remove unused label d_reg_n.
1955 2000-11-24 Nick Clifton <nickc@redhat.com>
1957 * arm-opc.h: Add new opcode formatting parameter 'B'.
1958 (arm_opcodes): Add XScale, v5, and v5te instructions.
1959 (thumb_opcodes): Add v5t instructions.
1961 * arm-dis.c (print_insn_arm): Handle new 'B' format
1963 (print_insn_thumb): Decode BLX(1) instruction.
1965 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1967 * mips-opc.c: Fix file header comment.
1969 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1971 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1972 print_insn_cris_with_register_prefix.
1974 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1976 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1978 2000-11-07 Matthew Green <mrg@redhat.com>
1980 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1981 must be loaded there in their entirety.
1983 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1985 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1986 (compute_arch_mask): Add v8plusb and v9b machines.
1987 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1988 * sparc-opc.c: Support for Cheetah instruction set.
1989 (prefetch_table): Add #invalidate.
1991 2000-10-16 Nick Clifton <nickc@redhat.com>
1993 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1995 2000-10-06 Dave Brolley <brolley@redhat.com>
1997 * fr30-desc.h: Regenerate.
1998 * m32r-desc.h: Regenerate.
1999 * m32r-ibld.c: Regenerate.
2001 2000-10-05 Jim Wilson <wilson@redhat.com>
2003 * ia64-ic.tbl: Update from Intel.
2004 * ia64-asmtab.c: Regenerate.
2006 2000-10-04 Kazu Hirata <kazu@hxi.com>
2008 * ia64-gen.c: Convert C++-style comments to C-style comments.
2009 * tic54x-dis.c: Likewise.
2011 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
2013 Changes to add dollar prefix to registers for files where user symbols
2014 don't have a leading underscore. Fix formatting.
2015 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
2016 (format_reg): Add parameter with_reg_prefix. All callers changed.
2017 (print_with_operands): Ditto.
2018 (print_insn_cris_generic): Renamed from print_insn_cris, add
2019 parameter with_reg_prefix.
2020 (print_insn_cris_with_register_prefix,
2021 print_insn_cris_without_register_prefix, cris_get_disassembler):
2023 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
2025 2000-09-22 Jim Wilson <wilson@redhat.com>
2027 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
2028 gt, ge, ngt, and nge.
2029 * ia64-asmtab.c: Regenerate.
2031 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
2032 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
2033 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
2034 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
2035 * ia64-asmtab.c: Regnerate.
2037 2000-09-13 Anders Norlander <anorland@acc.umu.se>
2039 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
2040 Add mfc0 and mtc0 with sub-selection values.
2041 Add clo and clz opcodes.
2042 Add msub and msubu instructions for MIPS32.
2043 Add madd/maddu aliases for mad/madu for MIPS32.
2044 Support wait, deret, eret, movn, pref for MIPS32.
2045 Support tlbp, tlbr, tlbwi, tlbwr.
2048 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
2049 (print_insn_arg): Handle 'H' args.
2050 (set_mips_isa_type): Recognize 4K.
2051 Use CPU_* defines instead of hardcoded numbers.
2053 2000-09-11 Catherine Moore <clm@redhat.com>
2055 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
2056 (d30v_format_tab): Use Rb2 for modinc and moddec.
2058 2000-09-07 Catherine Moore <clm@redhat.com>
2060 * d30v-opc.c (d30v_format_tab): Use format Ra for
2063 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
2065 * configure: Rebuilt with new libtool.m4.
2067 2000-09-05 Nick Clifton <nickc@redhat.com>
2069 * configure: Regenerate.
2070 * po/opcodes.pot: Regenerate.
2072 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
2074 * acinclude.m4: Include libtool and gettext macros from the
2076 * aclocal.m4, configure: Rebuilt.
2078 2000-08-30 Kazu Hirata <kazu@hxi.com>
2080 * tic80-dis.c: Fix formatting.
2082 2000-08-29 Kazu Hirata <kazu@hxi.com>
2084 * w65-dis.c: Fix formatting.
2086 2000-08-28 Mark Hatle <mhatle@mvista.com>
2088 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
2089 (powerpc_opcodes): Add table entries for PPC 405 instructions.
2090 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
2091 instructions. Added extended mnemonic mftbl as defined in the
2092 405GP manual for all PPCs.
2094 2000-08-28 Jim Wilson <wilson@redhat.com>
2096 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
2097 call. Change last goto to use failed instead of done.
2099 2000-08-28 Dave Brolley <brolley@redhat.com>
2101 * cgen-ibld.in (cgen_put_insn_int_value): New function.
2102 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2103 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
2104 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2105 * cgen-dis.in (read_insn): New static function.
2106 (print_insn): Use read_insn to read the insn into the buffer and set
2108 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
2110 * fr30-asm.c: Regenerated.
2111 * fr30-desc.c: Regenerated.
2112 * fr30-desc.h: Regenerated.
2113 * fr30-dis.c: Regenerated.
2114 * fr30-ibld.c: Regenerated.
2115 * fr30-opc.c: Regenerated.
2116 * fr30-opc.h: Regenerated.
2117 * m32r-asm.c: Regenerated.
2118 * m32r-desc.c: Regenerated.
2119 * m32r-desc.h: Regenerated.
2120 * m32r-dis.c: Regenerated.
2121 * m32r-ibld.c: Regenerated.
2122 * m32r-opc.c: Regenerated.
2124 2000-08-28 Kazu Hirata <kazu@hxi.com>
2126 * tic30-dis.c: Fix formatting.
2128 2000-08-27 Kazu Hirata <kazu@hxi.com>
2130 * sh-dis.c: Fix formatting.
2132 2000-08-24 David Edelsohn <dje@watson.ibm.com>
2134 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
2136 2000-08-24 Kazu Hirata <kazu@hxi.com>
2138 * z8k-dis.c: Fix formatting.
2140 2000-08-16 Jim Wilson <wilson@redhat.com>
2142 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
2143 break, mov-immediate, nop.
2144 * ia64-opc-f.c: Delete fpsub instructions.
2145 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
2146 address operand. Rewrite using macros to avoid long lines.
2147 * ia64-opc.h (POSTINC): Define.
2148 * ia64-asmtab.c: Regenerate.
2150 2000-08-15 Jim Wilson <wilson@redhat.com>
2152 * ia64-ic.tbl: Add missing entries.
2154 2000-08-08 Jason Eckhardt <jle@redhat.com>
2156 * i860-dis.c (print_br_address): Change third argument from int
2159 2000-08-07 Richard Henderson <rth@redhat.com>
2161 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
2162 for MLI templates. Handle IA64_OPND_TGT64.
2164 2000-08-04 Ben Elliston <bje@redhat.com>
2166 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
2167 * cgen.sh: Likewise.
2169 2000-08-02 Jim Wilson <wilson@redhat.com>
2171 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2173 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
2175 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
2176 Change return type from void to int. Check the combination
2177 of operands, return 1 if valid. Fix to avoid BUF overflow.
2178 Report undefined combinations of operands in COMMENT.
2179 Report internal errors to stderr. Output the adiw/sbiw
2180 constant operand in both decimal and hex.
2181 (print_insn_avr): Disassemble ldd/std with displacement of 0
2182 as ld/st. Check avr_operand () return value, handle invalid
2183 combinations of operands like unknown opcodes.
2185 2000-07-28 Ben Elliston <bje@redhat.com>
2187 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
2188 (run-cgen, stamp-m32r, stamp-fr30): New targets.
2189 * Makefile.in: Regenerate.
2190 * configure.in: Add --enable-cgen-maint option.
2191 * configure: Regenerate.
2193 2000-07-26 Dave Brolley <brolley@redhat.com>
2195 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
2196 (cgen_hw_lookup_by_num): Ditto.
2197 (cgen_operand_lookup_by_name): Ditto.
2198 (print_address): Ditto.
2199 (print_keyword): Ditto.
2200 * cgen-dis.c (hash_insn_array): Mark unused parameters with
2202 * cgen-asm.c (hash_insn_array): Mark unused parameters with
2204 (cgen_parse_keyword): Ditto.
2206 2000-07-22 Jason Eckhardt <jle@redhat.com>
2208 * i860-dis.c: New file.
2209 (print_insn_i860): New function.
2210 (print_br_address): New function.
2211 (sign_extend): New function.
2212 (BITWISE_OP): New macro.
2213 (I860_REG_PREFIX): New macro.
2214 (grnames, frnames, crnames): New structures.
2216 * disassemble.c (ARCH_i860): Define.
2217 (disassembler): Add check for bfd_arch_i860 to set disassemble
2218 function to print_insn_i860.
2220 * Makefile.in (CFILES): Added i860-dis.c.
2221 (ALL_MACHINES): Added i860-dis.lo.
2222 (i860-dis.lo): New dependences.
2224 * configure.in: New bits for bfd_i860_arch.
2226 * configure: Regenerated.
2228 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
2230 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
2231 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
2232 (cris-dis.lo, cris-opc.lo): New rules.
2233 * Makefile.in: Rebuild.
2234 * configure.in (bfd_cris_arch): New target.
2235 * configure: Rebuild.
2236 * disassemble.c (ARCH_cris): Define.
2237 (disassembler): Support ARCH_cris.
2238 * cris-dis.c, cris-opc.c: New files.
2239 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2241 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2243 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2244 Reported by Bill Clarke <llib@computer.org>.
2246 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2248 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2249 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2251 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2253 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2254 fput_const, extract_3, extract_5_load, extract_5_store,
2255 extract_5r_store, extract_5R_store, extract_10U_store,
2256 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2257 extract_12, extract_17, extract_22): Prototype.
2258 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2259 shadowing outer block.
2262 2000-07-05 DJ Delorie <dj@redhat.com>
2266 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2268 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2270 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2272 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2273 marked for translation (exception from the usual coding style).
2274 (print_insn_avr): Initialize insn2 to avoid warnings.
2276 2000-07-03 Kazu Hirata <kazu@hxi.com>
2278 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2279 * h8500-dis.c: Fix formatting.
2281 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2283 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2284 (CLEANFILES): Add DEPA.
2285 * Makefile.in: Regenerate.
2287 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2289 * arm-dis.c (regnames): Add an additional register set to match
2290 the set used by GCC. Make it the default.
2292 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2294 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2296 * Makefile.in: Regenerate.
2298 2000-06-20 H.J. Lu <hjl@gnu.org>
2300 * Makefile.am: Rebuild dependency.
2301 * Makefile.in: Rebuild.
2303 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2305 * Makefile.in, configure: regenerate
2306 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2308 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2310 * configure.in: Recognize m68hc12 and m68hc11.
2311 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2312 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2313 and opcode generation for m68hc11 and m68hc12.
2315 2000-06-16 Nick Duffek <nsd@redhat.com>
2317 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2318 bfd_mach_ppc_620 instead of 620.
2320 2000-06-12 Kazu Hirata <kazu@hxi.com>
2322 * h8300-dis.c: Fix formatting.
2323 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2326 2000-06-09 Denis Chertykov <denisc@overta.ru>
2328 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2330 2000-06-07 Denis Chertykov <denisc@overta.ru>
2332 * avr-dis.c: completely rewritten.
2334 2000-06-02 Kazu Hirata <kazu@hxi.com>
2336 * h8300-dis.c: Follow the GNU coding style.
2337 (bfd_h8_disassemble) Fix a typo.
2339 2000-06-01 Kazu Hirata <kazu@hxi.com>
2341 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2342 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2343 correctly. Fix a typo.
2345 2000-05-31 Nick Clifton <nickc@redhat.com>
2347 * opintl.h (_(String)): Explain why dgettext is used instead of
2350 2000-05-30 Nick Clifton <nickc@redhat.com>
2352 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2353 bindtextdomain): Replace defines with those from intl/libgettext.h
2354 to quieten gcc warnings.
2356 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2358 * Makefile.am: Update dependencies with "make dep-am"
2359 * Makefile.in: Regenerate.
2361 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2363 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2364 sign-extending operands.
2366 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2368 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2371 2000-05-21 Nick Clifton <nickc@redhat.com>
2373 * Makefile.am (LIBIBERTY): Define.
2375 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2377 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2378 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2379 (reg_names): Rename to std_reg_names. Change it to a char **
2381 (std_reg_names): New name for reg_names.
2382 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2385 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2387 * fr30-desc.h: Partially regenerated to account for changed
2388 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2389 * m32r-desc.h: Ditto.
2391 2000-05-15 Nick Clifton <nickc@redhat.com>
2393 * arm-opc.h: Use upper case for flasg in MSR and MRS
2394 instructions. Allow any bit to be set in the field_mask of
2395 the MSR instruction.
2397 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2398 field_mask of an MSR instruction.
2400 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2402 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2403 instructions changed to ldrsb/ldrsh.
2405 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2407 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2408 target addresses for 'jal' and 'j'.
2410 2000-05-10 Geoff Keating <geoffk@redhat.com>
2412 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2413 also available in common mode when powerpc syntax is being used.
2415 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2417 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2418 (dummy_print_address): Ditto.
2420 2000-05-04 Timothy Wall <twall@redhat.com>
2422 * tic54x-opc.c: New.
2423 * tic54x-dis.c: New.
2424 * disassemble.c (disassembler): Add ARCH_tic54x.
2425 * configure.in: Added tic54x target.
2427 * Makefile.am: Add tic54x dependencies.
2428 * Makefile.in: Ditto.
2430 2000-05-03 J.T. Conklin <jtc@redback.com>
2432 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2433 vector unit operands.
2434 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2435 unit instruction formats.
2436 (PPCVEC): New macro, mask for vector instructions.
2437 (powerpc_operands): Add table entries for above operand types.
2438 (powerpc_opcodes): Add table entries for vector instructions.
2440 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2441 (print_insn_little_powerpc): Likewise.
2442 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2444 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2446 * configure.in: Add bfd_powerpc_64_arch.
2447 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2450 2000-04-24 Nick Clifton <nickc@redhat.com>
2452 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2455 2000-04-23 Denis Chertykov <denisc@overta.ru>
2457 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2459 (reg_fmul_r): New. Extract source register from FMUL instruction.
2460 (reg_muls_d): New. Extract destination register from MULS instruction.
2461 (reg_muls_r): New. Extract source register from MULS instruction.
2462 (reg_movw_d): New. Extract destination register from MOVW instruction.
2463 (reg_movw_r): New. Extract source register from MOVW instruction.
2464 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2465 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2467 2000-04-22 Timothy Wall <twall@redhat.com>
2469 * ia64-gen.c (general): Add an ordered table of primary
2470 opcode names, as well as priority fields to disassembly data
2471 structures to enforce a preferred disassembly format based on the
2472 ordering of the opcode tables.
2473 (load_insn_classes): Show a useful message if IC tables are missing.
2474 (load_depfile): Ditto.
2475 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2476 distinguish preferred disassembly.
2477 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2478 format. Fix incorrect flag on fma.s/fma.s.s0.
2479 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2480 the highest priority.
2481 * ia64-opc-b.c: Use more abbreviations.
2482 * ia64-asmtab.c: Regenerate.
2484 2000-04-21 Jason Eckhardt <jle@redhat.com>
2486 * hppa-dis.c (extract_16): New function.
2487 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2488 new operand types l,y,&,fe,fE,fx.
2490 2000-04-21 Richard Henderson <rth@redhat.com>
2491 David Mosberger <davidm@hpl.hp.com>
2492 Timothy Wall <twall@redhat.com>
2493 Bob Manson <manson@charmed.cygnus.com>
2494 Jim Wilson <wilson@redhat.com>
2496 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2497 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2498 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2500 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2501 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2502 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2503 * Makefile.in: Rebuild.
2504 * configure Rebuild.
2505 * configure.in (bfd_ia64_arch): New target.
2506 * disassemble.c (ARCH_ia64): Define.
2507 (disassembler): Support ARCH_ia64.
2508 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2509 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2510 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2511 ia64-war.tbl, ia64-waw.tbl: New files.
2513 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2515 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2516 (disassemble): Use them.
2518 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2520 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2521 * Makefile.am: Update dependencies.
2522 * Makefile.in: Regenerate.
2524 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2526 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2527 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2528 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2529 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2530 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2531 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2532 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2533 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2534 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2535 ansidecl.h as sysdep.h includes it.
2537 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2539 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2540 --enable-build-warnings option.
2541 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2542 * Makefile.in, configure: Re-generate.
2544 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2546 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2547 stc GBR,@-<REG_N> is available for arch_sh1_up.
2548 Group parallel processing insn with identical mnemonics together.
2549 Make three-operand psha / pshl come first.
2551 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2553 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2554 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2555 (sh_arg_type): Add A_PC.
2556 (sh_table): Update entries using immediates. Add repeat.
2557 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2558 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2560 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2562 * po/opcodes.pot: Regenerate.
2564 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2565 (DEP): Quote when passing vars to sub-make. Add warning message
2567 (DEP1): Rewrite for "gcc -MM".
2568 (CLEANFILES): Add DEP2.
2569 Update dependencies.
2570 * Makefile.in: Regenerate.
2572 2000-04-03 Denis Chertykov <denisc@overta.ru>
2574 * avr-dis.c: Syntax cleanup.
2575 (add0fff): Print the pc relative address as a signed number.
2576 (add03f8): Likewise.
2578 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2580 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2581 the parameter ATTRIBUTE_UNUSED.
2582 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2584 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2586 * m10300-opc.c: SP-based offsets are always unsigned.
2588 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2590 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2591 [branch always] instead of "undefined".
2593 2000-03-27 Nick Clifton <nickc@redhat.com>
2595 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2596 short instructions, from end of list of long instructions.
2598 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2600 * Makefile.am (CFILES): Add avr-dis.c.
2601 (ALL_MACHINES): Add avr-dis.lo.
2603 2000-03-27 Alan Modra <alan@linuxcare.com>
2605 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2607 (print_insn_avr): Call function via pointer in K&R compatible way.
2608 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2609 add0fff, add03f8): Convert to old style function declaration and
2611 (avrdis_opcode): Add prototype.
2613 2000-03-27 Denis Chertykov <denisc@overta.ru>
2615 * avr-dis.c: New file. AVR disassembler.
2616 * configure.in (bfd_avr_arch): New architecture support.
2617 * disassemble.c: Likewise.
2618 * configure: Regenerate.
2620 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2622 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2624 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2626 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2627 flag to determine if operand is pc-relative.
2629 (d30v_format_table):
2630 (REL6S3): Renamed from IMM6S3.
2631 Added flag OPERAND_PCREL.
2632 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2633 added flag OPERAND_PCREL.
2634 (IMM12S3U): Replaced with REL12S3.
2635 (SHORT_D2, LONG_D): Delay target is pc-relative.
2636 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2637 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2638 using the REL* operands.
2639 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2640 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2641 LONG_Db, using REL* operands.
2642 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2643 (d30v_opcode_table): Use new *r formats.
2645 2000-02-28 Nick Clifton <nickc@redhat.com>
2647 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2648 'signed_overflow_ok_p'.
2650 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2652 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2653 name of the libtool directory.
2654 * Makefile.in: Rebuild.
2656 2000-02-24 Nick Clifton <nickc@redhat.com>
2658 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2659 (cgen_clear_signed_overflow_ok): New function.
2660 (cgen_signed_overflow_ok_p): New function.
2662 2000-02-23 Andrew Haley <aph@redhat.com>
2664 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2665 m32r-ibld.c, m32r-opc.h: Rebuild.
2667 2000-02-23 Linas Vepstas <linas@linas.org>
2669 * i370-dis.c, i370-opc.c: New.
2671 * disassemble.c (ARCH_i370): Define.
2672 (disassembler): Handle it.
2674 * Makefile.am: Add support for Linux/IBM 370.
2675 * configure.in: Likewise.
2677 * Makefile.in: Regenerate.
2678 * configure: Likewise.
2680 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2682 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2683 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2686 2000-02-22 Andrew Haley <aph@redhat.com>
2688 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2690 * mips-opc.c (G6): New define.
2691 (mips_builtin_op): Add "move" definition for -gp32.
2693 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2695 From Grant Erickson <gerickso@Brocade.COM>:
2696 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2698 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2700 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2703 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2705 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2706 (print_insn_ppi): Likewise.
2707 (print_insn_shx): Use info->mach to select appropriate insn set.
2708 Add support for sh-dsp. Remove FD_REG_N support.
2709 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2710 (sh_arg_type): Likewise. Remove FD_REG_N.
2711 (sh_dsp_reg_nums): New enum.
2712 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2713 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2714 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2715 (arch_sh3_dsp_up): Likewise.
2716 (sh_opcode_info): New field: arch.
2717 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2718 D_REG_N. Fill in arch field. Add sh-dsp insns.
2720 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2722 * arm-dis.c: Change flavor name from atpcs-special to
2723 special-atpcs to prevent name conflict in gdb.
2724 (get_arm_regname_num_options, set_arm_regname_option,
2725 get_arm_regnames): New functions. API to access the several
2726 flavor of register names. Note: Used by gdb.
2727 (print_insn_thumb): Use the register name entry from the currently
2728 selected flavor for LR and PC.
2730 2000-02-10 Nick Clifton <nickc@redhat.com>
2732 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2734 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2735 "mulsh.h" instructions.
2736 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2738 (print_insn_mcore): Add support for little endian targets.
2739 Add support for MULSH and OPSR classes.
2741 2000-02-07 Nick Clifton <nickc@redhat.com>
2743 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2744 Previous delat did not take.
2746 2000-02-03 Timothy Wall <twall@redhat.com>
2748 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2749 to adjust target address bounds checking and calculate the
2750 appropriate octet offset into data.
2752 2000-01-27 Nick Clifton <nickc@redhat.com>
2754 * arm-dis.c: (parse_disassembler_option): Rename to
2755 parse_arm_disassembler_option and allow to be exported.
2757 * disassemble.c (disassembler_usage): New function: Print out any
2758 target specific disassembler options.
2759 Call arm_disassembler_options() if the ARM architecture is being
2762 * arm-dis.c (NUM_ELEM): Define this macro if not already
2764 (arm_regname): New struct type for ARM register names.
2765 (arm_toggle_regnames): Delete.
2766 (parse_disassembler_option): Use register name structure.
2767 (print_insn): New function: Combines duplicate code found in
2768 print_insn_big_arm and print_insn_little_arm.
2769 (print_insn_big_arm): Call print_insn.
2770 (print_insn_little_arm): Call print_insn.
2771 (print_arm_disassembler_options): Display list of supported,
2772 ARM specific disassembler options.
2774 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2776 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2777 ARM_STT_16BIT flag as Thumb code symbols.
2779 * arm-dis.c (printf_insn_little_arm): Ditto.
2781 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2783 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2784 of raw thumb instructions.
2786 2000-01-20 Nick Clifton <nickc@redhat.com>
2788 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2790 2000-01-03 Nick Clifton <nickc@cygnus.com>
2792 * arm-dis.c (streq): New macro.
2793 (strneq): New macro.
2794 (force_thumb): ew local variable.
2795 (parse_disassembler_option): New function: Parse a single, ARM
2796 specific disassembler command line switch.
2797 (parse_disassembler_option): Call parse_disassembler_option to
2798 parse individual command line switches.
2799 (print_insn_big_arm): Check force_thumb.
2800 (print_insn_little_arm): Check force_thumb.
2802 For older changes see ChangeLog-9899
2808 version-control: never