2 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
4 * d10v-dis.c (print_operand): Change address printing
5 to correctly handle PC wrapping. Fixes PR11490.
8 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
10 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
13 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
15 * mips-dis.c (print_insn_mips16): Set insn_info information.
16 (print_mips16_insn_arg): Likewise.
18 * mips-dis.c (print_insn_mips16): Better handling of an extend
19 opcode followed by an instruction which can not be extended.
21 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
23 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
24 coldfire moveb instruction to not allow an address register as
25 destination. Although the documentation does not indicate that
26 this is invalid, experiments uncovered unexpected behavior.
27 Added a comment explaining the situation. Thanks to Andreas
28 Schwab for pointing this out to me.
31 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
33 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
34 entries are presorted so that entries with the same mnemonic are
35 adjacent to each other in the table. Sort the entries for each
36 instruction so that this is true.
39 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
41 * m68k-dis.c: Include <libiberty.h>.
42 (print_insn_m68k): Sort the opcode table on the most significant
46 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
48 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
49 "vsub", "vst", "xnor", and "xor" instructions.
50 (V_a1): Renamed from V_a, msb of accumulator reg number.
51 (V_a0): Add macro, lsb of accumulator reg number.
53 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
55 * tic80-dis.c (print_insn_tic80): Broke excessively long
56 function up into several smaller ones and arranged for
57 the instruction printing function to be callable recursively
58 to print vector instructions that have both a load and a
59 math instruction packed into a single opcode.
60 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
61 to explain why it comes after the other vector opcodes.
64 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
66 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
67 move insns to handle immediate operands.
69 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
71 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
72 fix operand mask in the "moveml" entries for the coldfire.
75 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
77 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
78 New macros for building vector instruction opcodes.
79 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
80 FMT_LI, which were unused. The field is now a flags field.
81 Remove some opcodes that are possible, but illegal, such
82 as long immediate instructions with doubles for immediate
83 values. Add "vadd" and "vld" instructions.
85 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
87 * tic80-opc.c (tic80_operands): Reorder some table entries to make
88 the order more logical. Move the shift alias instructions ("rotl",
89 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
90 interspersed with the regular sr.x and sl.x instructions. Add
91 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
92 "sub", "subu", "swcr", and "trap".
94 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
96 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
97 (OFF_SL_PC): Renamed from OFF_SL.
98 (OFF_SS_BR): New operand type for base relative operand.
99 (OFF_SL_BR): New operand type for base relative operand.
100 (REG_BASE): New operand type for base register operand.
101 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
102 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
103 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
105 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
106 10 char field, padded with spaces on rhs, rather than a string
107 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
108 than old TIC80_OPERAND_RELATIVE. Add support for new
109 TIC80_OPERAND_BASEREL flag bit.
111 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
113 * tic80-dis.c (print_insn_tic80): Print floating point operands
115 * tic80-opc.c (SPFI): Add single precision floating point
116 immediate operand type.
117 (ROTATE): Add rotate operand type for shifts.
118 (ENDMASK): Add for shifts.
119 (n): Macro for the 'n' bit.
120 (i): Macro for the 'i' bit.
121 (PD): Macro for the 'PD' field.
122 (P2): Macro for the 'P2' field.
123 (P1): Macro for the 'P1' field.
124 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
128 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
130 * mn10200-dis.c (disassemble): Mask off unwanted bits after
131 adding in current address for pc-relative operands.
134 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
136 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
137 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
138 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
139 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
140 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
141 REG_BASE_M_SI, REG_BASE_M_LI respectively.
142 (REG_SCALED, LSI_SCALED): New operand types.
143 (E): New macro for 'E' bit at bit 27.
144 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
145 opcodes, including the various size flavors (b,h,w,d) for
146 the direct load and store instructions.
148 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
150 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
152 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
153 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
154 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
155 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
156 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
157 masks with "MASK_* & ~M_*" to get the M bit reset.
158 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
160 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
162 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
163 correctly. Add support for printing TIC80_OPERAND_BITNUM and
164 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
166 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
167 CC, SICR, and LICR table entries.
168 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
169 "bcnd", and "brcr" opcodes.
172 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
174 * ppc-opc.c (powerpc_operands): Make comment match the
175 actual fields (no shift field).
176 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
178 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
179 partial implementation, work in progress.
180 * tic80-opc.c (tic80_operands): Begin construction operands table.
181 (tic80_opcodes): Continue populating opcodes table and start
182 filling in the operand indices.
183 (tic80_num_opcodes): Add this.
186 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
188 * m68k-opc.c: Add #B case for moveq.
190 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
192 * mn10300-dis.c (disassemble): Make sure all variables are initialized
193 before they are used.
196 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
198 * v850-opc.c (v850_opcodes): Put curly-braces around operands
199 for "breakpoint" instruction.
202 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
204 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
205 (dep): Use ALL_CFLAGS rather than CFLAGS.
208 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
210 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
214 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
216 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
218 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
221 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
223 * mips16-opc.c: Add "abs".
226 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
228 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
229 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
230 (disassembler): Add bfd_arch_tic80 support to set disassemble
232 * tic80-dis.c (print_insn_tic80): Add stub.
234 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
236 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
237 * configure: Regenerate with autoconf.
238 * tic80-dis.c: Add file.
239 * tic80-opc.c: Add file.
243 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
245 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
248 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
250 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
251 (mn10200_opcodes): Use it for some logicals and btst insns.
252 Add "break" and "trap" instructions.
254 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
256 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
258 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
260 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
261 relative load or add now depends upon whether the instruction is
264 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
266 * mn10200-dis.c: Finish writing disassembler.
267 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
268 Fix mask for "jmp (an)".
270 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
271 handle endianness issues for mn10300.
273 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
275 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
277 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
278 instruction. Fix opcode field for "movb (imm24),dn".
280 * mn10200-opc.c (mn10200_operands): Fix insertion position
283 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
285 * mn10200-opc.c: Create mn10200 opcode table.
286 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
287 but moving along nicely.
289 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
291 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
293 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
295 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
296 specifiers for fmovem* instructions.
298 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
300 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
302 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
304 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
307 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
309 * mn10300-opc.c: Add some comments explaining the various
312 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
314 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
316 * m68k-dis.c (print_insn_arg): Handle new < and > operand
319 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
320 operand specifiers in fmovm* instructions.
322 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
324 * ppc-opc.c (insert_li): Give an error if the offset has the two
325 least significant bits set.
327 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
329 * mips-dis.c (print_insn_mips16): Separate the instruction from
330 the arguments with a tab, not a space.
332 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
334 * mn10300-dis.c (disasemble): Finish conversion to '$' as
337 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
340 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
342 * configure: Rebuild with autoconf 2.12.
344 Add support for mips16 (16 bit MIPS implementation):
345 * mips16-opc.c: New file.
346 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
347 (mips16_reg_names): New static array.
348 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
349 after seeing a 16 bit symbol.
350 (print_insn_little_mips): Likewise.
351 (print_insn_mips16): New static function.
352 (print_mips16_insn_arg): New static function.
353 * mips-opc.c: Add jalx instruction.
354 * Makefile.in (mips16-opc.o): New target.
355 * configure.in: Use mips16-opc.o for bfd_mips_arch.
356 * configure: Rebuild.
358 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
360 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
361 operand specifiers in *save, *restore and movem* instructions.
363 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
366 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
367 register operands for immediate arithmetic, not, neg, negx, and
368 set according to condition instructions.
370 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
371 specifier of the effective-address operand in immediate forms of
372 arithmetic instructions. The specifier for the immediate operand
373 notes how and where the constant will be stored.
375 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
377 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
380 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
383 * mn10300-dis.c (disassemble): Prefix registers with '%'.
385 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
387 * mn10300-dis.c (disassemble): Handle register lists.
389 * mn10300-opc.c: Fix handling of register list operand for
390 "call", "ret", and "rets" instructions.
392 * mn10300-dis.c (disassemble): Print PC-relative and memory
393 addresses symbolically if possible.
394 * mn10300-opc.c: Distinguish between absolute memory addresses,
395 pc-relative offsets & random immediates.
397 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
399 (disassemble): Handle SPLIT and EXTENDED operands.
401 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
403 * mn10300-dis.c: Rough cut at printing some operands.
405 * mn10300-dis.c: Start working on disassembler support.
406 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
408 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
410 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
413 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
415 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
418 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
420 * mn10300-opc.c (mn10300_opcodes): Demand parens around
421 register argument is calls and jmp instructions.
423 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
425 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
426 getx operand. Fix opcode for mulqu imm,dn.
428 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
430 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
431 in MN10300_OPERAND_SPLIT operands for how many bits
432 appear in the basic insn word. Add IMM32_HIGH24,
433 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
434 (mn10300_opcodes): Use new operands as needed.
436 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
437 for bset, bclr, btst instructions.
438 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
440 * mn10300-opc.c (mn10300_operands): Remove many redundant
441 operands. Update opcode table as appropriate.
442 (IMM32): Add MN10300_OPERAND_SPLIT flag.
443 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
445 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
447 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
448 operands (for indexed load/stores). Fix bitpos for DI
449 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
450 few instructions that insert immediates/displacements in the
451 middle of the instruction. Add IMM8E for 8 bit immediate in
452 the extended part of an instruction.
453 (mn10300_operands): Use new opcodes as appropriate.
456 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
458 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
459 sequential so the assembler never parallelizes it with
463 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
465 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
466 a data/address register that appears in register field 0
467 and register field 1.
468 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
470 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
472 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
473 standard disassembly.
475 * alpha-opc.c (alpha_operands): Rearrange flags slot.
476 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
477 Recategorize PALcode instructions.
480 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
482 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
485 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
487 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
488 there are no operand types.
491 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
493 * v850-opc.c (D9_RELAX): Renamed from D9, all references
495 (v850_operands): Make sure D22 immediately follows D9_RELAX.
498 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
500 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
503 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
505 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
506 and sst.w instructions.
508 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
512 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
514 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
517 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
519 * ppc-opc.c (PPCPWR2): Define.
520 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
523 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
525 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
526 field for movhu instruction.
529 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
530 cast value to "long" not "signed long" to keep hpux10
534 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
536 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
539 * mn10300-opc.c (FMT*): Remove definitions.
541 * mn10300-opc.c (mn10300_opcodes): Fix destination register
542 for shift-by-register opcodes.
544 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
545 into [AD][MN][01] for encoding the position of the register
548 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
550 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
551 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
553 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
555 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
556 Fix various typos. Add "PAREN" operand.
558 (mn10300_opcodes): Surround all memory addresses with "PAREN"
559 operands. Fix several typos.
561 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
564 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
566 * mn10300-opc.c (FMT_XX): Renumber starting at one.
567 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
569 (mn10300_opcodes): Break opcode format out into its own field.
570 Update many operand fields to deal with signed vs unsigned
571 issues. Fix one or two typos in the "mov" instruction
572 opcode, mask and/or operand fields.
574 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
576 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
579 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
581 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
582 all opcodes. Very rough cut at operands for all opcodes.
584 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
587 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
589 * mn10200-opc.c, mn10300-opc.c: New files.
590 * mn10200-dis.c, mn10300-dis.c: New files.
591 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
592 * disassemble.c: Break mn10x00 support into 10200 and 10300
594 * configure.in: Likewise.
595 * configure: Rebuilt.
597 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
599 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
601 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
603 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
605 * disassemble (ARCH_mn10x00): Define.
606 (disassembler): Handle bfd_arch_mn10x00.
607 * configure.in: Recognize bfd_mn10x00_arch.
608 * configure: Rebuilt.
610 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
612 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
613 accordingly. Don't declare functions using op_rtn.
616 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
618 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
619 params to be more standard.
620 * (disassemble): Print absolute addresses and symbolic names for
621 branch and jump targets.
622 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
624 * (v850_opcodes): Add breakpoint insn.
627 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
629 * m68k-opc.c: Move the fmovemx data register cases before the
630 other cases, so that they get recognized before the data register
631 does gets treated as a degenerate register list.
633 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
635 * mips-opc.c: Add a case for "div" and "divu" with two registers
636 and a destination of $0.
638 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
640 * mips-dis.c (print_insn_arg): Add prototype.
641 (_print_insn_mips): Ditto.
643 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
645 * mips-dis.c (print_insn_arg): Print condition code registers as
648 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
650 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
653 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
655 * v850-dis.c (disassemble): Make static. Provide prototype.
657 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
659 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
662 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
664 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
665 ']' characters into the output stream.
666 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
667 Add "memop" field to all opcodes (for the disassembler).
668 Reorder opcodes so that "nop" comes before "mov" and "jr"
671 * v850-dis.c (print_insn_v850): Fix typo in last change.
673 * v850-dis.c (print_insn_v850): Properly handle disassembling
674 a two byte insn at the end of a memory region when the memory
675 region's size is only two byte aligned.
677 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
679 * v850-dis.c (v850_reg_names): Define.
680 (v850_sreg_names, v850_cc_names): Likewise.
681 (disassemble): Very rough cut at printing operands (unformatted).
683 * v850-opc.c (BOP_MASK): Fix.
684 (v850_opcodes): Fix mask for jarl and jr.
686 * v850-dis.c: New file. Skeleton for disassembler support.
687 * Makefile.in Remove v850 references, they're not needed here
688 and they weren't being sanitized away.
689 * configure.in: Add v850-dis.o when building v850 toolchains.
690 * configure: Rebuilt.
691 * disassemble.c (disassembler): Call v850 disassembler.
693 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
694 (insert_d8_6, extract_d8_6): New functions.
695 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
696 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
698 (IF4A, IF4B): Use "D7" instead of "D7S".
699 (IF4C, IF4D): Use "D8_7" instead of "D8".
700 (IF4E, IF4F): New. Use "D8_6".
701 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
702 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
704 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
705 (v850_operands): Change D16 to D16_15, use special insert/extract
706 routines. New new D16 that uses the generic insert/extract code.
707 (IF7A, IF7B): Use D16_15.
708 (IF7C, IF7D): New. Use D16.
709 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
711 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
712 message. Issue an error if the branch offset is odd.
714 * v850-opc.c: Add notes about needing special insert/extract
715 for all the load/store insns, except "ld.b" and "st.b".
717 * v850-opc.c (insert_d22, extract_d22): New functions.
718 (v850_operands): Use insert_d22 and extract_d22 for
720 (insert_d9): Fix range check.
722 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
724 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
725 and set bits field to D9 and D22 operands.
727 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
729 * v850-opc.c (v850_operands): Define SR2 operand.
730 (v850_opcodes): "ldsr" uses R1,SR2.
732 * v850-opc.c (v850_opcodes): Fix opcode specs for
733 sld.w, sst.b, sst.h, sst.w, and nop.
735 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
737 * v850-opc.c (v850_opcodes): Add null opcode to mark the
738 end of the opcode table.
742 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
744 * d10v-opc.c (pre_defined_registers): Added register pairs,
745 "r0-r1", "r2-r3", etc.
749 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
751 * v850-opc.c (v850_operands): Make I16 be a signed operand.
752 Create I16U for an unsigned 16bit mmediate operand.
753 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
755 * v850-opc.c (v850_operands): Define EP operand.
756 (IF4A, IF4B, IF4C, IF4D): Use EP.
758 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
759 with immediate operand, "movhi". Tweak "ldsr".
761 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
762 correct. Get sld.[bhw] and sst.[bhw] closer.
764 * v850-opc.c (v850_operands): "not" is a two byte insn
766 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
768 * v850-opc.c (v850_operands): D16 inserts at offset 16!
770 * v850-opc.c (two): Get order of words correct.
772 * v850-opc.c (v850_operands): I16 inserts at offset 16!
774 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
775 register source and destination operands.
776 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
778 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
779 same thinko in "trap" opcode.
781 * v850-opc.c (v850_opcodes): Add initializer for size field
784 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
785 Add D8 for 8-bit unsigned field in short load/store insns.
786 (IF4A, IF4D): These both need two registers.
787 (IF4C, IF4D): Define. Use 8-bit unsigned field.
788 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
789 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
790 for "ldsr" and "stsr".
791 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
794 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
795 short store word (sst.w).
797 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
799 * v850-opc.c (v850_operands): Added insert and extract fields,
800 pointers to functions that handle unusual operand encodings.
802 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
804 * v850-opc.c (v850_opcodes): Enable "trap".
806 * v850-opc.c (v850_opcodes): Fix order of displacement
807 and register for "set1", "clr1", "not1", and "tst1".
809 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
811 * v850-opc.c (v850_operands): Add "B3" support.
812 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
815 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
817 * v850-opc.c: Close unterminated comment.
819 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
821 * v850-opc.c (v850_operands): Add flags field.
822 (v850_opcodes): add move opcodes.
824 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
826 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
827 * configure: (bfd_v850v_arch) Add new case.
828 * configure.in: (bfd_v850_arch) Add new case.
829 * v850-opc.c: New file.
832 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
834 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
837 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
839 * d10v-opc.c: Add additional information to the opcode
840 table to help determinine which instructions can be done
844 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
846 * mpw-make.sed: Update editing of include pathnames to be
849 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
851 * arm-opc.h: Added "bx" instruction definition.
853 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
855 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
858 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
860 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
862 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
864 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
867 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
869 * makefile.vms: Update for alpha-opc changes.
871 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
873 * i386-dis.c (print_insn_i386): Actually return the correct value.
874 (ONE, OP_ONE): #ifdef out; not used.
877 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
879 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
880 Changed subi operand type to treat 0 as 16.
883 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
885 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
888 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
890 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
891 memory transfer instructions. Add new format string entries %h and %s.
892 * arm-dis.c: (print_insn_arm): Provide decoding of the new
896 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
898 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
899 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
902 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
904 * alpha-dis.c (print_insn_alpha_osf): Remove.
905 (print_insn_alpha_vms): Remove.
906 (print_insn_alpha): Make globally visible. Chose the register
907 names based on info->flavour.
908 * disassemble.c: Always return print_insn_alpha for the alpha.
911 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
913 * d10v-dis.c (dis_long): Handle unknown opcodes.
915 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
917 * d10v-opc.c: Changes to support signed and unsigned numbers.
918 All instructions with the same name that have long and short forms
919 now end in ".l" or ".s". Divs added.
920 * d10v-dis.c: Changes to support signed and unsigned numbers.
922 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
924 * d10v-dis.c: Change all functions to use info->print_address_func.
927 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
929 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
930 move ccr/sr insns more strict so that the disassembler only
931 selects them when the addressing mode is data register.
934 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
935 * d10v-opc.c (pre_defined_registers): Declare.
936 * d10v-dis.c (print_operand): Now uses pre_defined_registers
937 to pick a better name for the registers.
940 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
942 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
943 operands for fexpand and fpmerge. From Christian Kuehnke
944 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
946 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
948 * alpha-dis.c (print_insn_alpha): No longer the user-visible
949 print routine. Take new regnames and cpumask arguments.
950 Kill the environment variable nonsense.
951 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
952 (print_insn_alpha_vms): New function. Do VMS style regnames.
953 * disassemble.c (disassembler): Test bfd flavour to pick
954 between OSF and VMS routines. Default to OSF.
956 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
958 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
959 * configure: Rebuild.
960 * Makefile.in (install): Use @INSTALL_SHLIB@.
963 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
965 * configure: (bfd_d10v_arch) Add new case.
966 * configure.in: (bfd_d10v_arch) Add new case.
967 * d10v-dis.c: New file.
968 * d10v-opc.c: New file.
969 * disassemble.c (disassembler) Add entry for d10v.
972 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
974 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
975 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
977 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
979 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
980 distinguish between variants of the instruction set.
981 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
982 distinguish between variants of the instruction set.
984 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
986 * i386-dis.c (print_insn_i8086): New routine to disassemble using
987 the 8086 instruction set.
988 * i386-dis.c: General cleanups. Make most things static. Add
989 prototypes. Get rid of static variables aflags and dflags. Pass
990 them as args (to almost everything).
992 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
994 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
996 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
998 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
999 if the next arg is marked with SRC_IN_DST. Gross.
1001 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1002 we're looking for and find EXR.
1004 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1005 if we're looking for KBIT and we don't find it.
1007 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1010 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1011 3bit immediate operands.
1013 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1015 * Released binutils 2.7.
1017 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1018 <kkaempf@progis.ac-net.de>.
1020 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1022 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1024 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1026 * sparc-dis.c (print_insn_sparclite): New routine to print
1027 sparclite instructions.
1029 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1031 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1033 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1035 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1036 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1037 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1039 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1041 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1042 Use autoconf-set values.
1043 (docdir, oldincludedir): Removed.
1044 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1046 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1048 * alpha-opc.c: New file.
1049 * alpha-opc.h: Remove.
1050 * alpha-dis.c: Complete rewrite to use new opcode table.
1051 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1052 * configure: Rebuild with autoconf 2.10.
1053 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1054 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1056 (alpha-opc.o): New target.
1058 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1060 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1061 Set imm_added_to_rs1 even if the source and destination register
1064 * sparc-opc.c: Add some two operand forms of the wr instruction.
1066 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1068 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1071 * disassemble.c (disassembler): Handle H8/S.
1072 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1074 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1076 * sparc-opc.c: Add beq/teq as aliases for be/te.
1078 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1079 <sergei@msil.sps.mot.com>.
1081 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1083 * makefile.vms: New file.
1085 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1087 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1089 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1092 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1094 * i386-dis.c (OP_OFF): Call append_prefix.
1096 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1098 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1099 unsigned long to silence a warning from the Solaris PowerPC
1102 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1104 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1106 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1108 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1110 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1111 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1112 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1113 cpush, cpusha, cpull sparclet insns.
1115 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1117 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1119 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1121 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1122 Set F_FLOAT on other floating point instructions.
1124 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1126 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1128 (powerpc_opcodes): Add 860/821 specific SPRs.
1130 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1132 * configure.in: Permit --enable-shared to specify a list of
1133 directories. Set and substitute BFD_PICLIST.
1134 * configure: Rebuild.
1135 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1136 uses. Set to @BFD_PICLIST@.
1138 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1140 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1141 not "abs", which may be needed for the absolute in something
1142 like btst #0,@10:8. Print L_3 immediates separately from other
1143 immediates. Change ABSMOV reference to ABS8MEM.
1145 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1147 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1148 (current_arch_mask): New static global.
1149 (compute_arch_mask): New static function.
1150 (print_insn_sparc): Delete sparc_v9_p. New static local
1151 current_mach. Resort opcode table if current_mach changes.
1152 Generalize "insn not supported" test.
1153 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1154 Delete test for v9/!v9.
1155 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1157 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1158 (brfcx): Renamed to FBRX.
1159 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1160 coprocessor mnemonics are not supported on the sparclet).
1161 (condf): Renamed to CONDF.
1162 (SLCBCC2): Delete F_ALIAS flag.
1164 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1166 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1167 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1169 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1171 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1172 that the shared library version number is set correctly.
1174 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1176 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1177 Miles Bader <miles@gnu.ai.mit.edu>.
1178 * configure: Rebuild.
1180 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1182 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1185 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1187 * configure: Rebuild with autoconf 2.8.
1189 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1191 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1192 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1194 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1196 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1197 since they appear as targets in Makefile.in.
1198 * configure: Rebuild.
1200 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1202 * mpw-make.sed: Edit out shared library support bits.
1204 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1206 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1207 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1208 (sparc_opcodes): Add sparclet insns.
1209 (sparclet_cpreg_table): New static local.
1210 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1211 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1213 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1215 * i386-dis.c (index16): New static variable.
1216 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1218 (OP_indirE): Return result of OP_E.
1219 (OP_E): Check for 16 bit addressing mode, and disassemble
1220 correctly. Optimised 32 bit case a little. Don't print
1221 "(base,index,scale)" when sib specifies only an offset.
1223 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1225 * configure.in: Set and substitute SHLIB_DEP.
1226 * configure: Rebuild.
1227 * Makefile.in (SHLIB_DEP): New variable.
1228 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1229 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1230 COMMON_SHLIB, add them to piclist with appropriate modifications.
1231 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1232 here: just use piclist.
1234 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1236 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1237 (print_insn_sparc): Rewrite v9/not-v9 tests.
1238 (compare_opcodes): Likewise.
1239 * sparc-opc.c (MASK_<ARCH>): Define.
1240 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1241 (sparclet,v6notv9): Define.
1242 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1243 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1245 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1247 * configure.in: Call AC_PROG_CC before configure.host.
1248 * configure: Rebuild.
1250 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1252 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1254 * i386-dis.c (onebyte_has_modrm): New static array.
1255 (twobyte_has_modrm): New static array.
1256 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1258 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1260 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1263 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1265 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1268 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1270 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1271 m68010up, not just m68020up | cpu32.
1273 * Makefile.in (SONAME): New variable.
1274 ($(SHLINK)): Make a link to the transformed name, as well.
1275 (stamp-tshlink): New target.
1276 (install): Skip stamp-tshlink during install.
1278 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1280 * configure.in: Call AC_ARG_PROGRAM.
1281 * configure: Rebuild.
1282 * Makefile.in (program_transform_name): New variable.
1283 (install): Transform library name before installing it.
1285 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1287 * i960-dis.c (mem): Add HX dcinva instruction.
1289 Support for building as a shared library, based on patches from
1290 Alan Modra <alan@spri.levels.unisa.edu.au>:
1291 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1292 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1293 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1294 * configure: Rebuild.
1295 * Makefile.in (ALLLIBS): New variable.
1296 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1297 (COMMON_SHLIB, SHLINK): New variables.
1298 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1299 (STAGESTUFF): Remove variable.
1300 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1301 (stamp-piclist, piclist): New targets.
1302 ($(SHLIB), $(SHLINK)): New targets.
1303 ($(OFILES)): Depend upon stamp-picdir.
1304 (disassemble.o): Build twice if PICFLAG is set.
1305 (MOSTLYCLEAN): Add pic/*.o.
1306 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1307 (distclean): Remove pic and stamp-picdir.
1308 (install): Install shared libraries.
1309 (stamp-picdir): New target.
1311 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1313 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1314 Print unknown instruction as "unknown", rather than in hex.
1316 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1318 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1320 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1322 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1324 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1326 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1327 when necessary. From Ulrich Drepper
1328 <drepper@myware.rz.uni-karlsruhe.de>.
1330 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1332 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1333 sparc_num_opcodes. Update architecture enum values.
1334 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1335 (sparc_opcode_lookup_arch): New function.
1336 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1337 (sparc_opcodes): Add v9a shutdown insn.
1339 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1341 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1342 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1344 (print_insn_sparc64): Deleted.
1345 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1348 * sparc-opc.c (architecture_pname): Add v9a.
1350 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1352 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1353 incorrectly defined as 0x16 when it should be 0x15.
1354 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1355 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1356 excb (exception barrier) which is defined in the Alpha
1357 Architecture Handbook version 2.
1358 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1359 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1360 disassembled as or, for example.
1362 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1364 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1365 (_print_insn_mips): Change i from int to unsigned int.
1367 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1369 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1370 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1372 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1374 * i386-dis.c: Added Pentium Pro instructions.
1376 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1378 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1381 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1383 * sh-opc.h (sh_nibble_type): Added REG_B.
1384 (sh_arg_type): Added A_REG_B.
1385 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1387 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1389 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1391 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1393 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1395 * Makefile.in (distclean): Remove stamp-h. From Ronald
1396 F. Guilmette <rfg@monkeys.com>.
1398 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1400 From David Mosberger-Tang <davidm@azstarnet.com>:
1401 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1404 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1406 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1407 (sh_table): Added many SH3 opcodes.
1408 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1410 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1412 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1413 (subco,subco.): Mark this PPC, not PPCCOM.
1415 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1417 * configure: Rebuild with autoconf 2.7.
1419 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1421 * configure: Rebuild with autoconf 2.6.
1423 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1425 * configure.in: Sort list of architectures. Accept but do nothing
1426 for alliant, convex, pyramid, romp, and tahoe.
1428 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1430 * a29k-dis.c (print_special): Change num to unsigned int.
1432 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1434 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1437 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1439 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1440 * configure: Rebuilt.
1442 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1444 * configure.in: Add case for bfd_i860_arch.
1445 * configure: Rebuild.
1447 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1449 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1450 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1451 (NEXTDOUBLE): Likewise.
1452 (print_insn_m68k): Don't match fmoveml if there is more than one
1453 register in the list.
1454 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1456 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1458 * m68k-opc.c: Use #W rather than #w.
1459 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1461 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1463 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1464 and likewise for all the dbxx opcodes.
1466 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1468 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1470 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1472 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1473 the VR4100 specific instructions to the mips_opcodes structure.
1475 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1477 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1478 ugly Metrowerks bug in CW6, is fixed in CW7.
1480 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1482 * ppc-opc.c (whole file): Add flags for common/any support.
1484 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1486 * Makefile.in (BISON): Remove macro.
1487 (FLAGS_TO_PASS): Remove BISON.
1489 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1491 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1493 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1494 instructions that take no args by looking at the match mask.
1495 (print_insn_arg): Always print "%" before register names.
1496 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1497 [case '_']: Don't print "@#" before address.
1498 [case 'J']: Use "%s" as format string, not register name.
1499 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1501 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1503 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1506 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1508 From David Mosberger-Tang <davidm@azstarnet.com>
1510 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1511 (alpha_insn_set): added definitions for VAX floating point
1512 instructions (Unix compilers don't generate these, but handcoded
1513 assembly might still use them).
1515 * alpha-dis.c (print_insn_alpha): added support for disassembling
1516 the miscellaneous instructions in the Alpha instruction set.
1518 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1520 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1521 no longer create sysdep.h, sed ppc-opc.c to work around a
1522 serious Metrowerks C bug.
1523 * mpw-make.in: Remove.
1524 * mpw-make.sed: New file, used by mpw-configure to edit
1525 Makefile.in into an MPW makefile.
1527 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1529 * Makefile.in (maintainer-clean): New synonym for realclean.
1531 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1533 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1534 which use '0', '1', and '2' instead. Specify the proper size for
1535 a pmove immediate operand. Correct the pmovefd patterns to be
1536 moves to a register, not from a register.
1537 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1539 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1541 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1542 %psr, %wim, %tbr as F_NOTV9.
1544 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1546 * Makefile.in (Makefile): Just rebuild Makefile when running
1548 (config.h, stamp-h): New targets.
1549 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1550 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1551 rebuilding config.h.
1552 * configure: Rebuild.
1554 * mips-opc.c: Change unaligned loads and stores with "t,A"
1555 operands to use "t,A(b)".
1557 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1559 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1561 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1563 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1564 until 3 instead of until 2.
1566 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1568 * Makefile.in (ALL_CFLAGS): Define.
1569 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1570 (MOSTLYCLEAN): Add config.log.
1571 (distclean): Don't remove config.log.
1572 * configure.in: Substitute HDEFINES.
1573 * configure: Rebuild.
1575 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1577 * sh-opc.h (sh_arg_type): Add F_FR0.
1578 (sh_table, case fmac): Add F_FR0 as first argument.
1580 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1582 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1584 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1586 * sparc-dis.c: Remove all references to NO_V9.
1588 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1590 * aclocal.m4: Just include ../bfd/aclocal.m4.
1591 * configure: Rebuild.
1593 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1595 * sparc-dis.c (X_DISP19): Define.
1596 (print_insn, case 'G'): Use it.
1597 (print_insn, case 'L'): Sign extend displacement.
1599 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1601 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1602 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1603 host_makefile_frag or frags.
1604 * aclocal.m4: New file.
1605 * configure: Rebuild.
1606 * Makefile.in (INSTALL): Set to @INSTALL@.
1607 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1608 (INSTALL_DATA): Set to @INSTALL_DATA@.
1610 (AR_FLAGS): Set to rc rather than qc.
1611 (CC): Define as @CC@.
1612 (CFLAGS): Set to @CFLAGS@.
1613 (@host_makefile_frag@): Remove.
1614 (config.status): Remove dependency upon @frags@.
1616 * configure.in: ../bfd/config.bfd now just sets shell variables.
1617 Use them rather than looking through target Makefile fragments.
1618 * configure: Rebuild.
1620 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1622 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1624 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1626 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1627 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1630 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1631 (lookup_{name,value}): New functions.
1632 (prefetch_table): New static local.
1633 (sparc_{encode,decode}_prefetch): New functions.
1634 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1636 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1638 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1641 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1643 * sh-dis.c: Correct comment on first line of file.
1645 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1647 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1649 * sparc-opc.c (asi, membar): New static locals.
1650 (sparc_{encode,decode}_{asi,membar}): New functions.
1651 (sparc_opcodes, membar insn): Fix.
1652 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1653 Support decoding of membar masks.
1656 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1658 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1660 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1662 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1663 and likewise for the other branches. Add bhs as an alias for bcc,
1664 and likewise for the size variants. Add dbhs as an alias for
1667 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1669 * sh-opc.h (FP sts instructions): Update to match reality.
1671 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1673 * m68k-dis.c: (fpcr_names): Add % before all register names.
1674 (reg_names): Likewise.
1675 (print_insn_arg): Don't explicitly print % before register names.
1676 Add % before register names in static array names. In case 'r',
1677 print data registers as `@(Dn)', not `Dn@'. When printing a
1678 memory address, don't print @# before it.
1679 (print_indexed): Change base_disp and outer_disp from int to
1680 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1681 syntax. Sign extend 8 byte displacement correctly.
1682 (print_base): Print using MIT syntax. Print zpc when appropriate.
1683 Change parameter disp from int to bfd_vma.
1685 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1688 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1690 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1691 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1692 * sh-opc.h (sh_arg_type): Add new operand types.
1693 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1695 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1697 * Makefile.in (distclean): Remove generated file config.h.
1699 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1701 * Makefile.in (distclean): Remove generated file config.h.
1703 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1705 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1707 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1709 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1710 rather than numopcodes. Use m68k_opcodes rather than removed
1711 opcode function. Don't check F_ALIAS.
1712 (print_insn_arg): Change first parameter to be const char *.
1713 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1714 (m68k-opc.o): New target.
1715 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1716 * configure: Rebuild.
1718 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1720 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1721 (opcode_bits, opcode_hash_table): New variables.
1722 (opcodes_initialized): Renamed from opcodes_sorted.
1723 (build_hash_table): New function.
1724 (is_delayed_branch): Use hash table.
1725 (print_insn): Renamed from print_insn_sparc, made static.
1726 Build and use hash table. If !sparc64, ignore sparc64 insns,
1727 and vice-versa if sparc64.
1728 (print_insn_sparc, print_insn_sparc64): New functions.
1729 (compare_opcodes): Move sparc64 opcodes to end.
1730 Print commutative insns with constant second.
1731 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1733 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1735 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1736 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1737 avoids printing a delay slot in a delay slot.
1738 * sh-opc.h (sh_table): Fully bracket last entry.
1740 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1742 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1744 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1746 * configure.in: Get host_makefile_frag from ${srcdir}.
1748 * configure.in: Autoconfiscated. Check for string[s].h. Create
1749 config.h from config.in. Don't set up sysdep.h link.
1750 * sysdep.h: New file.
1751 * configure, config.in: New files, generated from configure.in.
1752 * Makefile.in: Updated to be processed autoconf-style.
1753 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1754 (Makefile): Depend on config.status.
1755 (config.status): New rule.
1756 * configure.bat: Update Makefile substitutions.
1758 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1760 * mips-opc.c (L1): Define.
1761 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1762 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1765 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1767 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1768 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1769 have multiple add units but only a single logical unit.
1771 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1772 shifted by 18, without any insertion or extraction function.
1773 (insert_cr, extract_cr): Remove.
1776 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1778 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1781 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1783 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1786 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1788 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1789 * sh-opc.h: Add copyright.
1791 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1793 * Makefile.in (crunch-m68k): Delete extra target accidentally
1794 checked in a while ago.
1796 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1798 * sh-opc.h (sh_table): Add SH3 support.
1800 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1802 * sh-opc.h: Added bsrf and braf.
1804 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1806 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1807 bogus [ls]fm{ea,fd} patterns.
1809 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1810 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1811 initialize it from memory. Make function static.
1812 (print_insn_{big,little}_arm): New functions.
1813 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1814 the correct endianness.
1817 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1819 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1820 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1823 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1825 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1828 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1830 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1831 17th, so that it builds again using GCC as the compiler.
1833 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1835 * mips-dis.c (print_insn_little_mips): Cast return value from
1836 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1837 expects an unsigned long, and that might be fewer words of
1838 argument storage (e.g., if bfd_vma is long long on a 32-bit
1840 (print_insn_big_mips): Likewise with bfd_getb32 value.
1841 (_print_insn_mips): Now static.
1843 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1845 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1846 gcc memory hog problem with initializer is fixed.
1849 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1851 * arc-opc.c (NULL): Define.
1852 (arc_operands, insn fields u,s): Delete.
1853 (arc_operands, insn fields a,b,c): Mark as signed.
1854 (arc_opcodes): No longer const, links computed at run-time.
1855 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1856 suffixes that affect the insn code.
1857 (arc_opcodes): Resort table to macros are first.
1858 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1859 (arc_opcodes, st [b] entry): Likewise.
1860 (arc_opcodes, st [b,d] entry): Fix mask, value.
1861 (arc_reg_names): Add entries for r29, r30, r31, r60.
1862 (opcode_map, icode_map): New static globals.
1863 (arc_opcode_init_tables): Initialize them.
1864 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1865 (insert_shimmoffset): Signal error if register present.
1867 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1870 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1872 Merge in support for Mac MPW as a host.
1873 (Old change descriptions retained for informational value.)
1875 * mpw-config.in (archname): Compute from the config.
1876 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1878 * mpw-config.in (target_arch): Compute from canonical target.
1879 (m68k, mips, powerpc, sparc): Add architectures.
1880 * mpw-make.in (disassemble.c.o): Add.
1881 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1883 * mpw-config.in (BFD_MACHINES): Set to a default value.
1884 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1886 * mpw-make.in (CSEARCH): Add extra-include to search path.
1888 * mpw-config.in (varargs.h): Don't create.
1889 (sysdep.h): Create using forward-include.
1890 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1892 * mpw-config.in: New file, MPW version of configure.in.
1893 * mpw-make.in: New file, MPW version of Makefile.in.
1896 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1898 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1899 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1900 (print_insn_*): Pass bfd mach number, not opcode version.
1901 * arc-opc.c (arc_get_opcode_mach): New function.
1904 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1906 * alpha-dis.c (print_insn_alpha): Put empty statement after
1909 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1911 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1912 (low_sign_extend): Likewise.
1913 (get_field): Delete unused function.
1914 (set_field, deposit_14, deposit_21): Likewise.
1916 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1918 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1921 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1923 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1925 * alpha-opc.h (OSF_ASMCODE): define
1926 print pal-code names as defined in App C of the
1927 Alpha Architecture Reference Manual
1929 * alpha-dis.c: cleaned up output
1930 print stylized code forms as defined in App A.4.3 of the
1931 Alpha Architecture Reference Manual
1933 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1935 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1937 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1940 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1942 * m68k-dis.c (opcode): New function. Returns address of opcode
1943 table entry given index, even if the opcode table was split to
1944 work around gcc bugs.
1945 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1947 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1948 (reg_names): Now const.
1949 (print_insn_arg): Arrays cacheFieldName and names now const.
1950 (print_indexed): Array scales now const.
1953 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1955 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1956 (print_insn_arc_{host,graphics,audio}): Likewise.
1957 (print_insn): Add prototype.
1958 (arc_get_disassembler): New arg `big_p'. Return little or big
1959 print fn accordingly.
1960 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1961 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1962 (arc_opval_supported): Likewise.
1963 * disassemble.c (disassembler): Pass big endian flag to
1964 arc_get_disassembler.
1967 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1969 * ppc-opc.c: Sort recently added instructions by minor opcode
1970 number within major opcode number.
1972 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1974 * hppa-dis.c: Include libhppa.h.
1976 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1978 * mips-opc.c: Change dli to use M_DLI, and add dla.
1980 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1982 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1985 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1987 * arc-dis.c (arc_get_disassembler): Change argument to int,
1988 one of bfd_mach_arc_xxx. All callers updated.
1991 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1993 * mips-opc.c: Add r4650 mul instruction.
1995 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1997 * mips-opc.c: Add uld and usd macros for unaligned double load and
2000 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2002 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2003 mfdcr, mtdcr, icbt, iccci.
2006 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2008 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2009 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2010 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2011 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2012 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2013 (insert_absaddr): New function.
2015 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2017 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2018 New argument `cpu', pass it to arc_opcode_init_tables.
2019 Document byte order dependencies. Ignore unsupported insns.
2020 (arc_get_disassembler): New function.
2021 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2022 print_insn_arc_audio): New functions.
2023 * arc-opc.c (MULTSHIFT operand): Delete.
2024 (UNSIGNED, SATURATION): New operands.
2025 (mac, mul, mul64, mulu64): New insns.
2026 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2027 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2028 (host,graphics,audio extended and auxiliary regs): Define.
2029 (ss, sc, mh, ml): New suffixes.
2030 (arc_opcode_supported, arc_opval_supported): New functions.
2031 (insert_multshift, extract_multshift): Deleted.
2032 * disassemble.c (disassembler, case bfd_arch_arc): Call
2033 arc_get_disassembler to get disassembler routine.
2036 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2038 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2039 signed char fields to shorts, more portable.
2041 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2043 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2044 char fields as signed chars, since they may have negative values.
2046 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2048 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2049 (mycroft@netbsd.org).
2051 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2053 From "Logg, Ed" <elogg@ea.com>:
2054 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2055 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2058 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2060 * ppc-opc.c: Changes based on patch from David Edelsohn
2061 <edelsohn@mhpcc.edu>.
2062 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2065 (insert_tbr): New static function.
2066 (extract_tbr): New static function.
2067 (XFXFXM_MASK, XFXM): Define.
2068 (XSPRBAT_MASK, XSPRG_MASK): Define.
2069 (powerpc_opcodes): Add instructions to access special registers by
2070 name. Add mtcr and mftbu.
2072 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2074 * mips-opc.c (P3): Define.
2075 (mips_opcodes): Add mad and madu.
2077 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2079 * configure.in: Add W65 support.
2080 * disassemble.c: Likewise.
2081 * w65-opc.h, w65-dis.c: New files.
2083 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2085 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2089 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2091 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2093 * arc-opc.c (extract_reladdr): New function.
2094 (insert_reladdr): Store address right-shifted by 2.
2097 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2099 * mips-opc.c: Add dli as a synonym for li.
2102 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2104 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2106 (extraction fns): Insn argument now array of two words. Return pointer
2107 to value's table entry. All uses changed.
2108 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2109 (insert_multshift, extract_multshift): New fns.
2110 (arc_operands): Add support for cache bypass suffix. Add support for
2111 predefined aux regs. Modifier bits moved to flags field.
2112 (arc_opcodes): Likewise.
2113 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2114 New insn rlc. Update to syntax in programmer's manual.
2115 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2116 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2118 (arc_opcode_init_tables): New argument to indicate cpu type.
2119 (insert_reg): Handle predefined aux regs.
2120 (extract_reg): Likewise.
2121 (lookup_register): New fn.
2122 * arc-dis.c (arc_condition_codes): Deleted.
2123 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2124 Clean up modifier handling. Handle predefined aux regs.
2127 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2129 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2130 print something for reserved opcode values, even if it won't
2133 * mips-dis.c (_print_insn_mips): When initializing, shift right
2134 and mask, to avoid sign extension problems on the Alpha.
2136 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2140 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2142 * configure.in: Add ARC support.
2143 * disassemble.c: Likewise.
2144 * arc-dis.c, arc-opc.c: New files.
2147 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2149 * sh-opc.h (mov.l gbr): Get direction right.
2150 * sh-dis.c (print_insn_shx): New function.
2151 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2152 print opcodes with right byte order.
2154 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2156 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2157 to avoid conflicts with getopt.
2159 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2161 * hppa-dis.c (print_insn_hppa): Read the instruction using
2162 bfd_getb32, so that it works on a little endian or 64 bit host.
2163 Remove unused local variable op.
2165 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2167 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2168 addu does not work correctly if -mips3.
2170 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2172 * a29k-dis.c (print_special): Add special register names defined
2173 on 29030, 29040 and 29050.
2174 (print_insn): Handle new operand type 'I'.
2176 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2178 * Makefile.in (INSTALL): Use top level install.sh script.
2180 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2182 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2183 that it works on a little endian host.
2185 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2187 * configure.in: Use ${config_shell} when running config.bfd.
2189 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2191 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2193 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2195 * a29k-dis.c (print_insn): Print the opcode.
2197 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2199 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2201 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2203 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2205 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2207 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2208 which store a value into memory.
2210 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2212 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2213 * arm-dis.c, arm-opc.h: New files.
2215 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2217 * Makefile.in (ns32k-dis.o): Add dependency.
2218 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2219 string, not as array of chars.
2221 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2223 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2225 * sparc-opc.c: Added sparclite extended FP operations, and
2226 versions of v9 impdep* instructions permitting specification of
2229 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2231 * i960-dis.c (reg_names): Now const.
2232 (struct sparse_tabent): New type, copied from array type in mem
2234 (ctrl): Local static array ctrl_tab now const.
2235 (cobr): Local static array cobr_tab now const.
2236 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2237 static variable mem_tab no longer explicitly initialized. Changed
2238 mem_init to const array of struct sparse_tabent.
2239 (reg): Local static variable reg_tab no longer explicitly
2240 initialized. Changed reg_init to const array of struct
2242 (ea): Local static array scale_tab now const.
2244 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2247 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2249 * configure.bat: the disassember needs to be enabled for
2250 "objdump -d" to work in djgpp.
2252 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2254 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2255 (invalid_float): Enabled general version, doesn't require running
2256 on ns32k host. Changed to take char* argument, and test for
2257 explicitly specified sizes, instead of using sizeof() on host CPU
2259 (INVALID_FLOAT): Cast first argument.
2260 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2261 list_P032, list_M032): Now const.
2262 (optlist, list_search): Made appropriate arguments now point to
2264 (print_insn_arg): Changed static array of one-character-string
2265 pointers into a static const array of characters; fixed sprintf
2266 statement accordingly.
2268 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2270 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2271 from distribution. A ns32k-dis.c from a previous distribution has
2272 been brought up to date and supports the new interface.
2274 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2276 * configure.in: add bfd_ns32k_arch target support.
2278 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2279 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2281 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2283 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2286 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2288 * h8300-dis.c, mips-dis.c: Don't use true and false.
2290 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2292 * configure.in: Change --with-targets to --enable-targets.
2294 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2296 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2297 opcodes to the first instruction with that opcode, to speed
2298 disassembly of large files. From ralphc@pyramid.com (Ralph
2301 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2303 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2305 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2307 * configure.bat: update to latest makefile.in
2309 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2311 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2312 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2313 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2314 slot insn is in a delay slot.
2315 * z8k-opc.h: (resflg): Fix patterns.
2316 * h8500-opc.h Fix CR insn patterns.
2318 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2320 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2321 "cmpl" before POWER versions, so that gas -many uses them.
2323 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2325 * disassemble.c: New file.
2326 * Makefile.in (OFILES): Add disassemble.o.
2327 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2328 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2329 binutils/configure.in.
2331 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2332 opcode being examined.
2334 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2336 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2337 (insert_ral, insert_ram, insert_ras): New functions.
2338 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2339 RAS for store with update.
2341 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2343 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2344 (edelsohn@npac.syr.edu).
2346 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2348 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2351 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2353 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2355 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2357 * ppc-opc.c (powerpc_operands): The signedp field has been
2358 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2359 instead. Add new operand SISIGNOPT.
2360 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2361 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2362 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2365 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2367 * i386-dis.c (struct private): Renamed to dis_private. `private'
2368 is a reserved word for dynix cc.
2370 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2372 * configure.in: Change error message to refer to bfd/config.bfd
2373 rather than bfd/configure.in.
2375 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2377 * ppc-opc.c: Define POWER2 as short alias flag.
2378 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2381 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2383 * i960-dis.c (print_insn_i960): Don't read a second word for
2384 opcodes 0, 1, 2 and 3.
2386 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2388 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2390 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2392 * m68881-ext.c: Removed; no longer used.
2393 * Makefile.in: Changed accordingly.
2395 * m68k-dis.c (ext_format_68881): Don't declare.
2396 (print_insn_m68k): If an instruction uses place 'i', it uses at
2397 least four fixed bytes.
2398 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2399 extended float, convert to double using floatformat_to_double, not
2400 ieee_extended_to_double, and fetch the data before converting it.
2402 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2404 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2405 davidj@ICSI.Berkeley.EDU (David Johnson).
2407 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2409 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2410 PowerPC uses bdnz[l][a].
2412 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2414 * dis-buf.c, i386-dis.c: Include sysdep.h.
2416 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2418 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2420 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2421 by Motorola PowerPC 601 with PPC_OPCODE_601.
2422 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2423 Disassemble Motorola PowerPC 601 instructions as well as normal
2424 PowerPC instructions.
2426 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2428 * i960-dis.c (reg, mem): Just use a static array instead of
2431 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2433 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2434 condition name index if this is for a negated condition.
2436 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2437 Floating point format for 'H' operand is backwards from normal
2438 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2439 operands (fmpyadd and fmpysub), handle bizarre register
2440 translation correctly for single precision format.
2442 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2443 or 'I' operands if the next format specifier is 'M' (fcmp
2444 condition completer).
2446 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2448 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2449 single number giving a bitmask for the MB and ME fields of an M
2450 form instruction. Change NB to accept 32, and turn it into 0;
2451 also turn 0 into 32 when disassembling. Seperated SH from NB.
2452 (insert_mbe, extract_mbe): New functions.
2453 (insert_nb, extract_nb): New functions.
2454 (SC_MASK): Mask out SA and LK bits.
2455 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2456 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2457 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2458 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2459 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2460 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2461 (powerpc_macros): Define table of macro definitions.
2462 (powerpc_num_macros): Define.
2464 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2465 if PPC_OPERAND_NEXT is set.
2467 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2469 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2470 char. Retrieve contents using bfd_getl32 instead of shifting.
2472 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2474 * ppc-opc.c: New file. Opcode table for PowerPC, including
2475 opcodes for POWER (RS/6000).
2476 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2477 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2478 (CFILES): Add ppc-dis.c.
2479 (ppc-dis.o, ppc-opc.o): New targets.
2480 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2482 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2484 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2485 No space before 'u', 'f', or 'N'.
2487 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2489 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2490 farther than we should.
2492 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2494 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2496 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2498 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2500 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2501 needs it, to prevent reading past the end of a section.
2503 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2505 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2506 Removed t,A case for la; always use t,A(b) case.
2508 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2510 From Ted Lemen <mellon@pepper.ncd.com>
2511 * mips-dis.c (print_insn_arg): Handle 'k'.
2512 * mips-opc.c: Make cache use k, not t.
2514 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2516 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2517 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2518 FLOAT_FORMAT_CODE to put out floating point register names.
2520 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2522 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2524 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2526 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2528 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2530 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2531 larger than 32. Moved dsxx32 variants first for disassembler.
2533 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2535 * z8kgen.c, z8k-opc.h: Add full lda information.
2537 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2539 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2540 movb instructions. Any necessary space will be emitted by
2541 the code to handle nullification completers.
2543 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2545 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2547 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2549 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2550 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2552 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2554 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2556 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2558 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2559 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2561 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2563 * m88k-dis.c (m88kdis): comment change. Remove space after
2565 (printop): handle new arg types DEC and XREG for m88110.
2567 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2569 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2570 type for absolute branch addresses. Delete special
2571 "ble" and "be" code in 'W' operand code.
2573 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2575 * mips-opc.c: Set hazard information correctly for branch
2576 likely instructions.
2578 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2580 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2581 info->fprintf_func for printing and info->print_address_func for
2584 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2586 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2588 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2590 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2591 Corrected second case of "b" for disassembler.
2593 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2595 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2596 to BFD swapping routines to correspond to BFD name changes.
2598 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2600 * mips-opc.c: Change div machine instruction to be z,s,t rather
2601 than s,t. Change div macro to be d,v,t rather than d,s,t.
2602 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2603 rem and remu which generates only the corresponding div
2604 instruction. This is for compatibility with the MIPS assembler,
2605 which only generates the simple machine instruction when an
2606 explicit destination of $0 is used.
2607 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2609 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2611 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2612 WR_31 hazard for bal, bgezal, bltzal.
2614 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2616 * hppa-dis.c (print_insn_hppa): Use print function
2617 from within the disassemble_info, not fprintf_filtered.
2619 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2621 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2622 Law, law@cs.utah.edu.)
2624 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2626 * mips-opc.c ("absu"): Removed.
2629 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2631 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2632 Changed hazard information to distinguish between memory load
2633 delays and coprocessor load delays.
2635 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2637 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2639 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2641 * configure.in: Don't pass cpu to config.bfd.
2643 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2645 * m88k-dis.c (m88kdis): Make class unsigned.
2647 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2649 * alpha-dis.c (print_insn_alpha): One branch format case was
2650 missing the instruction name.
2652 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2654 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2655 Add the arch-specific auxiliary files.
2656 (OFILES): Remove the arch-specific auxiliary files
2657 and use BFD_MACHINES instead of DIS_LIBS.
2658 * configure.in: Set BFD_MACHINES based on --with-targets option.
2660 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2662 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2665 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2667 * sparc-opc.c: Change CONST to const to deal with gcc
2668 -Dconst=__const -traditional.
2670 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2672 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2673 coprocessor instructions out of #if 0, and made them use new
2676 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2678 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2680 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2682 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2683 instruction, for use by the disassembler.
2685 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2686 hand-coded sign extensions that depended on 32-bit host ints.
2687 FIXME, we still depend on big-endian host bitfield ordering.
2688 (sparc_print_insn): Set the insn_info_valid field, and the
2689 other fields that describe the instruction being printed.
2691 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2693 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2694 `jmp' instead of just one of them.
2696 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2698 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2699 (fput_fp_reg_r): Renamed from fput_reg_r.
2700 (fput_fp_reg): New function.
2701 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2703 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2705 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2707 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2709 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2711 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2712 don't output a space.
2714 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2716 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2718 * mips-opc.c: New file, containing opcode table from
2719 ../include/opcode/mips.h.
2720 * Makefile.in: Add it.
2722 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2724 * m88k-dis.c: New file, moved in from gdb and changed to use the
2725 new dis-asm.h disassembler interface.
2726 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2727 (m88k-dis.o): New target.
2729 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2731 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2732 argument string const char * to correspond to opcode/mips.h.
2734 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2736 * mips-dis.c: Updated to account for name changes in new version
2738 * Makefile.in: Added header file dependencies.
2740 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2742 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2744 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2746 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2747 extend, rather than shifts.
2749 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2751 * Makefile.in: Undo 15 June change.
2753 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2755 * m68k-dis.c (print_insn_arg): Change return value to byte count
2757 * m68k-dis.c: Re-write to detect invalid operands before
2758 printing anything, so we can handle this the same way we
2759 handle invalid opcodes.
2761 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2763 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2765 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2767 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2770 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2772 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2774 * configure.in: Do make sysdep.h link.
2775 * Makefile.in: Search ../include. Don't search ../bfd.
2777 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2779 Changes from Jeff Law, law@cs.utah.edu:
2780 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2781 Do not print a space before the completers specified by
2784 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2786 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2787 defined, since gdb has been fixed.
2789 Changes from Jeff Law, law@cs.utah.edu:
2790 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2791 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2792 be a *disassemble_info, not a *FILE.
2793 * hppa-dis.c: Support 'd', '!', and 'a'.
2794 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2795 * hppa-dis.c: Delete cases which are no longer needed.
2797 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2799 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2801 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2803 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2806 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2808 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2809 * configure.in: No longer need to configure to get sysdep.h.
2811 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2813 * Patches from Jeffrey Law <law@cs.utah.edu>.
2814 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2815 templates for 1.1 FP computational instructions.
2817 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2819 * h8500-dis.c (print_insn_h8500): Address argument is type
2821 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2824 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2825 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2827 * sparc-dis.c (compare_opcodes): Move static declaration to
2830 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2832 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2833 instruction, remove unimp hack from 'l' argument.
2835 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2837 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2840 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2842 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2843 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2846 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2848 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2849 arrays of string pointers to 2-d arrays of chars, to save
2852 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2854 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2855 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2857 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2859 * hppa-dis.c: New file from Utah, adapted to new disassembler
2861 * Makefile.in: Include it.
2863 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2865 * sh-dis.c, sh-opc.h: New files.
2867 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2869 * alpha-dis.c, alpha-opc.h: New files.
2871 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2873 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2876 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2878 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2880 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2882 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2885 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2887 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2888 and double percent signs a few places.
2890 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2892 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2893 Use info->print_address_func not print_address.
2895 * dis-buf.c (generic_print_address): New function.
2897 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2899 * Makefile.in: Add sparc-dis.c.
2900 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2902 Add `add' instruction to the set that get checked
2903 for a preceding `sethi' in order to print an absolute address.
2904 * (print_insn): Disassembly prefers real instructions.
2905 (is_delayed_branch): Speed up.
2906 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2907 Still missing some float ops, and needs testing.
2908 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2909 F_ALIAS. Use printf, not fprintf, when not passing a file
2911 (compare_opcodes): Check that identical instructions have
2912 identical opcodes, complain otherwise.
2915 * Include reg_names.
2917 Use dis-asm.h/read_memory_func interface.
2919 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2921 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2922 deliberately return non-zero to setjmp from longjmp. Otherwise
2923 this code fails to compile.
2925 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2927 * m68k-dis.c: Fix prototype for fetch_arg().
2929 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2931 * dis-buf.c: New file, for new read_memory_func interface.
2932 Makefile.in (OFILES): Include it.
2933 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2934 Use new read_memory_func interface.
2936 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2938 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2939 * h8500-opc.h: Fix couple of opcodes.
2941 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2943 * Makefile.in: add dvi & installcheck targets
2945 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2947 * Makefile.in: Update for h8500-dis.c.
2949 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2951 * h8500-dis.c, h8500-opc.h: New files
2953 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2955 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2956 ../include/dis-asm.h.
2957 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2958 and ../gdb/m68k-pinsn.c).
2959 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2960 and ../gdb/i386-pinsn.c).
2961 * m68881-ext.c: New file. Moved definition of
2962 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2963 * Makefile.in: Adjust for new files.
2964 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2965 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2966 can be dis-assembled.
2968 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2970 * mips-dis.c (print_insn_arg): Now returns void.
2972 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2974 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2975 files that use the macros.
2977 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2979 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2980 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2981 (CFILES): Added mips-dis.c.
2983 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2985 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2986 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2988 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2990 * Makefile.in: Improve *clean rules.
2991 * configure.in: Allow a default host.
2993 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2995 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2996 files include other sysdep files
2998 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3000 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3002 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3004 * configure.in: For host support, use ../bfd/configure.host
3005 so it stays in sync with the ../bfd/hosts database.
3007 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3009 * configure.in: use cpu-vendor-os triple instead of nested cases
3011 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3013 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3014 *always* the wrong one.
3016 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3018 * z8kgen.c: added copyright info
3020 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3022 * z8k-dis.c (unparse_instr): prettier tabs
3023 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3025 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3027 * configure.in: Add ncr* configuration.
3028 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3029 picayune ANSI compilers happy.
3031 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3033 * configure.in (i386): Make i386 and i486 synonymous for now.
3034 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3036 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3038 * Makefile.in (install): Fix typo.
3040 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3042 * Makefile.in (make): Remove obsolete crud.
3043 (sparc-opc.o): Avoid Sun Make VPATH bug.
3045 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3047 * Makefile.in: since there are no SUBDIRS, remove rule and
3048 references of subdir_do.
3050 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3052 * Makefile.in (install): Get the library name right here too.
3053 Don't install bfd.h, since it's unrelated to this library. No
3054 subdirs to recurse into, either.
3055 (CFILES): The source file has a .c suffix, not .o.
3057 * sparc-opc.c: New file, moved from BFD.
3058 * Makefile.in (OFILES): Build it.
3060 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3062 * z8k-dis.c: fixed forward refferences of some declarations.
3064 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3066 * Makefile.in: get the name of the library right
3068 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3070 * z8k-dis.c: knows how to disassemble z8k stuff
3071 * z8k-opc.h: new file full of z8000 opcodes
3075 version-control: never
projects / deliverable / binutils-gdb.git / blob