2 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-dis.c: New file. Skeleton for disassembler support.
5 * Makefile.in Remove v850 references, they're not needed here
6 and they weren't being sanitized away.
7 * configure.in: Add v850-dis.o when building v850 toolchains.
9 * disassemble.c (disassembler): Call v850 disassembler.
11 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
12 (insert_d8_6, extract_d8_6): New functions.
13 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
14 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
16 (IF4A, IF4B): Use "D7" instead of "D7S".
17 (IF4C, IF4D): Use "D8_7" instead of "D8".
18 (IF4E, IF4F): New. Use "D8_6".
19 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
20 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
22 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
23 (v850_operands): Change D16 to D16_15, use special insert/extract
24 routines. New new D16 that uses the generic insert/extract code.
25 (IF7A, IF7B): Use D16_15.
26 (IF7C, IF7D): New. Use D16.
27 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
29 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
30 message. Issue an error if the branch offset is odd.
32 * v850-opc.c: Add notes about needing special insert/extract
33 for all the load/store insns, except "ld.b" and "st.b".
35 * v850-opc.c (insert_d22, extract_d22): New functions.
36 (v850_operands): Use insert_d22 and extract_d22 for
38 (insert_d9): Fix range check.
40 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
42 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
43 and set bits field to D9 and D22 operands.
45 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
47 * v850-opc.c (v850_operands): Define SR2 operand.
48 (v850_opcodes): "ldsr" uses R1,SR2.
50 * v850-opc.c (v850_opcodes): Fix opcode specs for
51 sld.w, sst.b, sst.h, sst.w, and nop.
53 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
55 * v850-opc.c (v850_opcodes): Add null opcode to mark the
56 end of the opcode table.
60 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
62 * d10v-opc.c (pre_defined_registers): Added register pairs,
63 "r0-r1", "r2-r3", etc.
67 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
69 * v850-opc.c (v850_operands): Make I16 be a signed operand.
70 Create I16U for an unsigned 16bit mmediate operand.
71 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
73 * v850-opc.c (v850_operands): Define EP operand.
74 (IF4A, IF4B, IF4C, IF4D): Use EP.
76 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
77 with immediate operand, "movhi". Tweak "ldsr".
79 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
80 correct. Get sld.[bhw] and sst.[bhw] closer.
82 * v850-opc.c (v850_operands): "not" is a two byte insn
84 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
86 * v850-opc.c (v850_operands): D16 inserts at offset 16!
88 * v850-opc.c (two): Get order of words correct.
90 * v850-opc.c (v850_operands): I16 inserts at offset 16!
92 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
93 register source and destination operands.
94 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
96 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
97 same thinko in "trap" opcode.
99 * v850-opc.c (v850_opcodes): Add initializer for size field
102 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
103 Add D8 for 8-bit unsigned field in short load/store insns.
104 (IF4A, IF4D): These both need two registers.
105 (IF4C, IF4D): Define. Use 8-bit unsigned field.
106 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
107 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
108 for "ldsr" and "stsr".
109 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
112 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
113 short store word (sst.w).
115 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
117 * v850-opc.c (v850_operands): Added insert and extract fields,
118 pointers to functions that handle unusual operand encodings.
120 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
122 * v850-opc.c (v850_opcodes): Enable "trap".
124 * v850-opc.c (v850_opcodes): Fix order of displacement
125 and register for "set1", "clr1", "not1", and "tst1".
127 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
129 * v850-opc.c (v850_operands): Add "B3" support.
130 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
133 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
135 * v850-opc.c: Close unterminated comment.
137 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
139 * v850-opc.c (v850_operands): Add flags field.
140 (v850_opcodes): add move opcodes.
142 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
144 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
145 * configure: (bfd_v850v_arch) Add new case.
146 * configure.in: (bfd_v850_arch) Add new case.
147 * v850-opc.c: New file.
150 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
152 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
155 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
157 * d10v-opc.c: Add additional information to the opcode
158 table to help determinine which instructions can be done
162 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
164 * mpw-make.sed: Update editing of include pathnames to be
167 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
169 * arm-opc.h: Added "bx" instruction definition.
171 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
173 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
176 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
178 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
180 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
182 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
185 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
187 * makefile.vms: Update for alpha-opc changes.
189 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
191 * i386-dis.c (print_insn_i386): Actually return the correct value.
192 (ONE, OP_ONE): #ifdef out; not used.
195 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
197 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
198 Changed subi operand type to treat 0 as 16.
201 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
203 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
206 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
208 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
209 memory transfer instructions. Add new format string entries %h and %s.
210 * arm-dis.c: (print_insn_arm): Provide decoding of the new
214 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
216 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
217 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
220 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
222 * alpha-dis.c (print_insn_alpha_osf): Remove.
223 (print_insn_alpha_vms): Remove.
224 (print_insn_alpha): Make globally visible. Chose the register
225 names based on info->flavour.
226 * disassemble.c: Always return print_insn_alpha for the alpha.
229 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
231 * d10v-dis.c (dis_long): Handle unknown opcodes.
233 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
235 * d10v-opc.c: Changes to support signed and unsigned numbers.
236 All instructions with the same name that have long and short forms
237 now end in ".l" or ".s". Divs added.
238 * d10v-dis.c: Changes to support signed and unsigned numbers.
240 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
242 * d10v-dis.c: Change all functions to use info->print_address_func.
245 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
247 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
248 move ccr/sr insns more strict so that the disassembler only
249 selects them when the addressing mode is data register.
252 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
253 * d10v-opc.c (pre_defined_registers): Declare.
254 * d10v-dis.c (print_operand): Now uses pre_defined_registers
255 to pick a better name for the registers.
258 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
260 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
261 operands for fexpand and fpmerge. From Christian Kuehnke
262 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
264 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
266 * alpha-dis.c (print_insn_alpha): No longer the user-visible
267 print routine. Take new regnames and cpumask arguments.
268 Kill the environment variable nonsense.
269 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
270 (print_insn_alpha_vms): New function. Do VMS style regnames.
271 * disassemble.c (disassembler): Test bfd flavour to pick
272 between OSF and VMS routines. Default to OSF.
274 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
276 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
277 * configure: Rebuild.
278 * Makefile.in (install): Use @INSTALL_SHLIB@.
281 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
283 * configure: (bfd_d10v_arch) Add new case.
284 * configure.in: (bfd_d10v_arch) Add new case.
285 * d10v-dis.c: New file.
286 * d10v-opc.c: New file.
287 * disassemble.c (disassembler) Add entry for d10v.
290 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
292 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
293 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
295 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
297 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
298 distinguish between variants of the instruction set.
299 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
300 distinguish between variants of the instruction set.
302 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
304 * i386-dis.c (print_insn_i8086): New routine to disassemble using
305 the 8086 instruction set.
306 * i386-dis.c: General cleanups. Make most things static. Add
307 prototypes. Get rid of static variables aflags and dflags. Pass
308 them as args (to almost everything).
310 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
312 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
314 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
316 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
317 if the next arg is marked with SRC_IN_DST. Gross.
319 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
320 we're looking for and find EXR.
322 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
323 if we're looking for KBIT and we don't find it.
325 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
328 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
329 3bit immediate operands.
331 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
333 * Released binutils 2.7.
335 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
336 <kkaempf@progis.ac-net.de>.
338 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
340 * alpha-opc.c: Correct second case of "mov" to use OPRL.
342 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
344 * sparc-dis.c (print_insn_sparclite): New routine to print
345 sparclite instructions.
347 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
349 * m68k-opc.c (m68k_opcodes): Add coldfire support.
351 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
353 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
354 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
355 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
357 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
359 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
360 Use autoconf-set values.
361 (docdir, oldincludedir): Removed.
362 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
364 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
366 * alpha-opc.c: New file.
367 * alpha-opc.h: Remove.
368 * alpha-dis.c: Complete rewrite to use new opcode table.
369 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
370 * configure: Rebuild with autoconf 2.10.
371 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
372 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
374 (alpha-opc.o): New target.
376 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
378 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
379 Set imm_added_to_rs1 even if the source and destination register
382 * sparc-opc.c: Add some two operand forms of the wr instruction.
384 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
386 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
389 * disassemble.c (disassembler): Handle H8/S.
390 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
392 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
394 * sparc-opc.c: Add beq/teq as aliases for be/te.
396 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
397 <sergei@msil.sps.mot.com>.
399 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
401 * makefile.vms: New file.
403 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
405 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
407 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
410 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
412 * i386-dis.c (OP_OFF): Call append_prefix.
414 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
416 * ppc-opc.c (instruction encoding macros): Add explicit casts to
417 unsigned long to silence a warning from the Solaris PowerPC
420 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
422 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
424 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
426 * sparc-dis.c (X_IMM,X_SIMM): New macros.
428 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
429 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
430 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
431 cpush, cpusha, cpull sparclet insns.
433 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
435 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
437 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
439 * sparc-opc.c: Set F_FBR on floating point branch instructions.
440 Set F_FLOAT on other floating point instructions.
442 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
444 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
446 (powerpc_opcodes): Add 860/821 specific SPRs.
448 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
450 * configure.in: Permit --enable-shared to specify a list of
451 directories. Set and substitute BFD_PICLIST.
452 * configure: Rebuild.
453 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
454 uses. Set to @BFD_PICLIST@.
456 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
458 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
459 not "abs", which may be needed for the absolute in something
460 like btst #0,@10:8. Print L_3 immediates separately from other
461 immediates. Change ABSMOV reference to ABS8MEM.
463 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
465 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
466 (current_arch_mask): New static global.
467 (compute_arch_mask): New static function.
468 (print_insn_sparc): Delete sparc_v9_p. New static local
469 current_mach. Resort opcode table if current_mach changes.
470 Generalize "insn not supported" test.
471 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
472 Delete test for v9/!v9.
473 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
475 (brfc): Split into CBR and FBR for coprocessor/fp branches.
476 (brfcx): Renamed to FBRX.
477 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
478 coprocessor mnemonics are not supported on the sparclet).
479 (condf): Renamed to CONDF.
480 (SLCBCC2): Delete F_ALIAS flag.
482 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
484 * sparc-opc.c (sparc_opcodes): rd must be 0 for
485 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
487 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
489 * Makefile.in (config.status): Depend upon BFD VERSION file, so
490 that the shared library version number is set correctly.
492 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
494 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
495 Miles Bader <miles@gnu.ai.mit.edu>.
496 * configure: Rebuild.
498 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
500 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
503 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
505 * configure: Rebuild with autoconf 2.8.
507 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
509 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
510 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
512 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
514 * configure.in: Don't set SHLIB or SHLINK to an empty string,
515 since they appear as targets in Makefile.in.
516 * configure: Rebuild.
518 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
520 * mpw-make.sed: Edit out shared library support bits.
522 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
524 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
525 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
526 (sparc_opcodes): Add sparclet insns.
527 (sparclet_cpreg_table): New static local.
528 (sparc_{encode,decode}_sparclet_cpreg): New functions.
529 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
531 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
533 * i386-dis.c (index16): New static variable.
534 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
536 (OP_indirE): Return result of OP_E.
537 (OP_E): Check for 16 bit addressing mode, and disassemble
538 correctly. Optimised 32 bit case a little. Don't print
539 "(base,index,scale)" when sib specifies only an offset.
541 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
543 * configure.in: Set and substitute SHLIB_DEP.
544 * configure: Rebuild.
545 * Makefile.in (SHLIB_DEP): New variable.
546 (LIBIBERTY_LISTS, BFD_LIST): New variables.
547 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
548 COMMON_SHLIB, add them to piclist with appropriate modifications.
549 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
550 here: just use piclist.
552 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
554 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
555 (print_insn_sparc): Rewrite v9/not-v9 tests.
556 (compare_opcodes): Likewise.
557 * sparc-opc.c (MASK_<ARCH>): Define.
558 (v6,v7,v8,sparclite,v9,v9a): Redefine.
559 (sparclet,v6notv9): Define.
560 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
561 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
563 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
565 * configure.in: Call AC_PROG_CC before configure.host.
566 * configure: Rebuild.
568 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
570 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
572 * i386-dis.c (onebyte_has_modrm): New static array.
573 (twobyte_has_modrm): New static array.
574 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
576 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
578 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
581 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
583 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
586 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
588 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
589 m68010up, not just m68020up | cpu32.
591 * Makefile.in (SONAME): New variable.
592 ($(SHLINK)): Make a link to the transformed name, as well.
593 (stamp-tshlink): New target.
594 (install): Skip stamp-tshlink during install.
596 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
598 * configure.in: Call AC_ARG_PROGRAM.
599 * configure: Rebuild.
600 * Makefile.in (program_transform_name): New variable.
601 (install): Transform library name before installing it.
603 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
605 * i960-dis.c (mem): Add HX dcinva instruction.
607 Support for building as a shared library, based on patches from
608 Alan Modra <alan@spri.levels.unisa.edu.au>:
609 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
610 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
611 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
612 * configure: Rebuild.
613 * Makefile.in (ALLLIBS): New variable.
614 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
615 (COMMON_SHLIB, SHLINK): New variables.
616 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
617 (STAGESTUFF): Remove variable.
618 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
619 (stamp-piclist, piclist): New targets.
620 ($(SHLIB), $(SHLINK)): New targets.
621 ($(OFILES)): Depend upon stamp-picdir.
622 (disassemble.o): Build twice if PICFLAG is set.
623 (MOSTLYCLEAN): Add pic/*.o.
624 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
625 (distclean): Remove pic and stamp-picdir.
626 (install): Install shared libraries.
627 (stamp-picdir): New target.
629 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
631 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
632 Print unknown instruction as "unknown", rather than in hex.
634 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
636 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
638 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
640 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
642 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
644 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
645 when necessary. From Ulrich Drepper
646 <drepper@myware.rz.uni-karlsruhe.de>.
648 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
650 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
651 sparc_num_opcodes. Update architecture enum values.
652 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
653 (sparc_opcode_lookup_arch): New function.
654 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
655 (sparc_opcodes): Add v9a shutdown insn.
657 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
659 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
660 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
662 (print_insn_sparc64): Deleted.
663 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
666 * sparc-opc.c (architecture_pname): Add v9a.
668 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
670 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
671 incorrectly defined as 0x16 when it should be 0x15.
672 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
673 (alpha_insn_set): added cvtst and cvttq float ops. Also added
674 excb (exception barrier) which is defined in the Alpha
675 Architecture Handbook version 2.
676 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
677 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
678 disassembled as or, for example.
680 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
682 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
683 (_print_insn_mips): Change i from int to unsigned int.
685 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
687 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
688 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
690 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
692 * i386-dis.c: Added Pentium Pro instructions.
694 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
696 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
699 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
701 * sh-opc.h (sh_nibble_type): Added REG_B.
702 (sh_arg_type): Added A_REG_B.
703 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
705 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
707 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
709 * disassemble.c (disassembler): Use new bfd_big_endian macro.
711 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
713 * Makefile.in (distclean): Remove stamp-h. From Ronald
714 F. Guilmette <rfg@monkeys.com>.
716 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
718 From David Mosberger-Tang <davidm@azstarnet.com>:
719 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
722 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
724 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
725 (sh_table): Added many SH3 opcodes.
726 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
728 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
730 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
731 (subco,subco.): Mark this PPC, not PPCCOM.
733 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
735 * configure: Rebuild with autoconf 2.7.
737 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
739 * configure: Rebuild with autoconf 2.6.
741 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
743 * configure.in: Sort list of architectures. Accept but do nothing
744 for alliant, convex, pyramid, romp, and tahoe.
746 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
748 * a29k-dis.c (print_special): Change num to unsigned int.
750 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
752 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
755 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
757 * configure.in: Call AC_CHECK_PROG to find and cache AR.
758 * configure: Rebuilt.
760 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
762 * configure.in: Add case for bfd_i860_arch.
763 * configure: Rebuild.
765 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
767 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
768 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
769 (NEXTDOUBLE): Likewise.
770 (print_insn_m68k): Don't match fmoveml if there is more than one
771 register in the list.
772 (print_insn_arg): Handle a place of '8' for a type of 'L'.
774 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
776 * m68k-opc.c: Use #W rather than #w.
777 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
779 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
781 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
782 and likewise for all the dbxx opcodes.
784 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
786 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
788 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
790 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
791 the VR4100 specific instructions to the mips_opcodes structure.
793 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
795 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
796 ugly Metrowerks bug in CW6, is fixed in CW7.
798 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
800 * ppc-opc.c (whole file): Add flags for common/any support.
802 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
804 * Makefile.in (BISON): Remove macro.
805 (FLAGS_TO_PASS): Remove BISON.
807 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
809 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
811 * m68k-dis.c (print_insn_m68k): Recognize all two-word
812 instructions that take no args by looking at the match mask.
813 (print_insn_arg): Always print "%" before register names.
814 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
815 [case '_']: Don't print "@#" before address.
816 [case 'J']: Use "%s" as format string, not register name.
817 [case 'B']: Treat place == 'C' like 'l' and 'L'.
819 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
821 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
824 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
826 From David Mosberger-Tang <davidm@azstarnet.com>
828 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
829 (alpha_insn_set): added definitions for VAX floating point
830 instructions (Unix compilers don't generate these, but handcoded
831 assembly might still use them).
833 * alpha-dis.c (print_insn_alpha): added support for disassembling
834 the miscellaneous instructions in the Alpha instruction set.
836 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
838 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
839 no longer create sysdep.h, sed ppc-opc.c to work around a
840 serious Metrowerks C bug.
841 * mpw-make.in: Remove.
842 * mpw-make.sed: New file, used by mpw-configure to edit
843 Makefile.in into an MPW makefile.
845 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
847 * Makefile.in (maintainer-clean): New synonym for realclean.
849 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
851 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
852 which use '0', '1', and '2' instead. Specify the proper size for
853 a pmove immediate operand. Correct the pmovefd patterns to be
854 moves to a register, not from a register.
855 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
857 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
859 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
860 %psr, %wim, %tbr as F_NOTV9.
862 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
864 * Makefile.in (Makefile): Just rebuild Makefile when running
866 (config.h, stamp-h): New targets.
867 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
868 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
870 * configure: Rebuild.
872 * mips-opc.c: Change unaligned loads and stores with "t,A"
873 operands to use "t,A(b)".
875 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
877 * sh-dis.c (print_insn_shx): Add F_FR0 support.
879 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
881 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
882 until 3 instead of until 2.
884 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
886 * Makefile.in (ALL_CFLAGS): Define.
887 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
888 (MOSTLYCLEAN): Add config.log.
889 (distclean): Don't remove config.log.
890 * configure.in: Substitute HDEFINES.
891 * configure: Rebuild.
893 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
895 * sh-opc.h (sh_arg_type): Add F_FR0.
896 (sh_table, case fmac): Add F_FR0 as first argument.
898 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
900 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
902 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
904 * sparc-dis.c: Remove all references to NO_V9.
906 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
908 * aclocal.m4: Just include ../bfd/aclocal.m4.
909 * configure: Rebuild.
911 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
913 * sparc-dis.c (X_DISP19): Define.
914 (print_insn, case 'G'): Use it.
915 (print_insn, case 'L'): Sign extend displacement.
917 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
919 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
920 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
921 host_makefile_frag or frags.
922 * aclocal.m4: New file.
923 * configure: Rebuild.
924 * Makefile.in (INSTALL): Set to @INSTALL@.
925 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
926 (INSTALL_DATA): Set to @INSTALL_DATA@.
928 (AR_FLAGS): Set to rc rather than qc.
929 (CC): Define as @CC@.
930 (CFLAGS): Set to @CFLAGS@.
931 (@host_makefile_frag@): Remove.
932 (config.status): Remove dependency upon @frags@.
934 * configure.in: ../bfd/config.bfd now just sets shell variables.
935 Use them rather than looking through target Makefile fragments.
936 * configure: Rebuild.
938 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
940 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
942 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
944 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
945 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
948 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
949 (lookup_{name,value}): New functions.
950 (prefetch_table): New static local.
951 (sparc_{encode,decode}_prefetch): New functions.
952 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
954 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
956 * sh-opc.h: Add blank lines to improve readabililty of sh3e
959 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
961 * sh-dis.c: Correct comment on first line of file.
963 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
965 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
967 * sparc-opc.c (asi, membar): New static locals.
968 (sparc_{encode,decode}_{asi,membar}): New functions.
969 (sparc_opcodes, membar insn): Fix.
970 * sparc-dis.c (print_insn): Call sparc_decode_asi.
971 Support decoding of membar masks.
974 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
976 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
978 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
980 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
981 and likewise for the other branches. Add bhs as an alias for bcc,
982 and likewise for the size variants. Add dbhs as an alias for
985 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
987 * sh-opc.h (FP sts instructions): Update to match reality.
989 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
991 * m68k-dis.c: (fpcr_names): Add % before all register names.
992 (reg_names): Likewise.
993 (print_insn_arg): Don't explicitly print % before register names.
994 Add % before register names in static array names. In case 'r',
995 print data registers as `@(Dn)', not `Dn@'. When printing a
996 memory address, don't print @# before it.
997 (print_indexed): Change base_disp and outer_disp from int to
998 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
999 syntax. Sign extend 8 byte displacement correctly.
1000 (print_base): Print using MIT syntax. Print zpc when appropriate.
1001 Change parameter disp from int to bfd_vma.
1003 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1006 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1008 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1009 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1010 * sh-opc.h (sh_arg_type): Add new operand types.
1011 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1013 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1015 * Makefile.in (distclean): Remove generated file config.h.
1017 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1019 * Makefile.in (distclean): Remove generated file config.h.
1021 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1023 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1025 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1027 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1028 rather than numopcodes. Use m68k_opcodes rather than removed
1029 opcode function. Don't check F_ALIAS.
1030 (print_insn_arg): Change first parameter to be const char *.
1031 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1032 (m68k-opc.o): New target.
1033 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1034 * configure: Rebuild.
1036 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1038 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1039 (opcode_bits, opcode_hash_table): New variables.
1040 (opcodes_initialized): Renamed from opcodes_sorted.
1041 (build_hash_table): New function.
1042 (is_delayed_branch): Use hash table.
1043 (print_insn): Renamed from print_insn_sparc, made static.
1044 Build and use hash table. If !sparc64, ignore sparc64 insns,
1045 and vice-versa if sparc64.
1046 (print_insn_sparc, print_insn_sparc64): New functions.
1047 (compare_opcodes): Move sparc64 opcodes to end.
1048 Print commutative insns with constant second.
1049 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1051 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1053 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1054 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1055 avoids printing a delay slot in a delay slot.
1056 * sh-opc.h (sh_table): Fully bracket last entry.
1058 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1060 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1062 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1064 * configure.in: Get host_makefile_frag from ${srcdir}.
1066 * configure.in: Autoconfiscated. Check for string[s].h. Create
1067 config.h from config.in. Don't set up sysdep.h link.
1068 * sysdep.h: New file.
1069 * configure, config.in: New files, generated from configure.in.
1070 * Makefile.in: Updated to be processed autoconf-style.
1071 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1072 (Makefile): Depend on config.status.
1073 (config.status): New rule.
1074 * configure.bat: Update Makefile substitutions.
1076 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1078 * mips-opc.c (L1): Define.
1079 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1080 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1083 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1085 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1086 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1087 have multiple add units but only a single logical unit.
1089 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1090 shifted by 18, without any insertion or extraction function.
1091 (insert_cr, extract_cr): Remove.
1094 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1096 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1099 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1101 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1104 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1106 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1107 * sh-opc.h: Add copyright.
1109 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1111 * Makefile.in (crunch-m68k): Delete extra target accidentally
1112 checked in a while ago.
1114 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1116 * sh-opc.h (sh_table): Add SH3 support.
1118 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1120 * sh-opc.h: Added bsrf and braf.
1122 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1124 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1125 bogus [ls]fm{ea,fd} patterns.
1127 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1128 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1129 initialize it from memory. Make function static.
1130 (print_insn_{big,little}_arm): New functions.
1131 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1132 the correct endianness.
1135 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1137 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1138 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1141 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1143 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1146 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1148 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1149 17th, so that it builds again using GCC as the compiler.
1151 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1153 * mips-dis.c (print_insn_little_mips): Cast return value from
1154 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1155 expects an unsigned long, and that might be fewer words of
1156 argument storage (e.g., if bfd_vma is long long on a 32-bit
1158 (print_insn_big_mips): Likewise with bfd_getb32 value.
1159 (_print_insn_mips): Now static.
1161 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1163 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1164 gcc memory hog problem with initializer is fixed.
1167 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1169 * arc-opc.c (NULL): Define.
1170 (arc_operands, insn fields u,s): Delete.
1171 (arc_operands, insn fields a,b,c): Mark as signed.
1172 (arc_opcodes): No longer const, links computed at run-time.
1173 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1174 suffixes that affect the insn code.
1175 (arc_opcodes): Resort table to macros are first.
1176 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1177 (arc_opcodes, st [b] entry): Likewise.
1178 (arc_opcodes, st [b,d] entry): Fix mask, value.
1179 (arc_reg_names): Add entries for r29, r30, r31, r60.
1180 (opcode_map, icode_map): New static globals.
1181 (arc_opcode_init_tables): Initialize them.
1182 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1183 (insert_shimmoffset): Signal error if register present.
1185 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1188 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1190 Merge in support for Mac MPW as a host.
1191 (Old change descriptions retained for informational value.)
1193 * mpw-config.in (archname): Compute from the config.
1194 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1196 * mpw-config.in (target_arch): Compute from canonical target.
1197 (m68k, mips, powerpc, sparc): Add architectures.
1198 * mpw-make.in (disassemble.c.o): Add.
1199 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1201 * mpw-config.in (BFD_MACHINES): Set to a default value.
1202 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1204 * mpw-make.in (CSEARCH): Add extra-include to search path.
1206 * mpw-config.in (varargs.h): Don't create.
1207 (sysdep.h): Create using forward-include.
1208 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1210 * mpw-config.in: New file, MPW version of configure.in.
1211 * mpw-make.in: New file, MPW version of Makefile.in.
1214 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1216 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1217 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1218 (print_insn_*): Pass bfd mach number, not opcode version.
1219 * arc-opc.c (arc_get_opcode_mach): New function.
1222 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1224 * alpha-dis.c (print_insn_alpha): Put empty statement after
1227 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1229 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1230 (low_sign_extend): Likewise.
1231 (get_field): Delete unused function.
1232 (set_field, deposit_14, deposit_21): Likewise.
1234 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1236 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1239 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1241 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1243 * alpha-opc.h (OSF_ASMCODE): define
1244 print pal-code names as defined in App C of the
1245 Alpha Architecture Reference Manual
1247 * alpha-dis.c: cleaned up output
1248 print stylized code forms as defined in App A.4.3 of the
1249 Alpha Architecture Reference Manual
1251 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1253 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1255 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1258 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1260 * m68k-dis.c (opcode): New function. Returns address of opcode
1261 table entry given index, even if the opcode table was split to
1262 work around gcc bugs.
1263 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1265 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1266 (reg_names): Now const.
1267 (print_insn_arg): Arrays cacheFieldName and names now const.
1268 (print_indexed): Array scales now const.
1271 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1273 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1274 (print_insn_arc_{host,graphics,audio}): Likewise.
1275 (print_insn): Add prototype.
1276 (arc_get_disassembler): New arg `big_p'. Return little or big
1277 print fn accordingly.
1278 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1279 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1280 (arc_opval_supported): Likewise.
1281 * disassemble.c (disassembler): Pass big endian flag to
1282 arc_get_disassembler.
1285 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1287 * ppc-opc.c: Sort recently added instructions by minor opcode
1288 number within major opcode number.
1290 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1292 * hppa-dis.c: Include libhppa.h.
1294 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1296 * mips-opc.c: Change dli to use M_DLI, and add dla.
1298 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1300 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1303 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1305 * arc-dis.c (arc_get_disassembler): Change argument to int,
1306 one of bfd_mach_arc_xxx. All callers updated.
1309 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1311 * mips-opc.c: Add r4650 mul instruction.
1313 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1315 * mips-opc.c: Add uld and usd macros for unaligned double load and
1318 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1320 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1321 mfdcr, mtdcr, icbt, iccci.
1324 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1326 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1327 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1328 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1329 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1330 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1331 (insert_absaddr): New function.
1333 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1335 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1336 New argument `cpu', pass it to arc_opcode_init_tables.
1337 Document byte order dependencies. Ignore unsupported insns.
1338 (arc_get_disassembler): New function.
1339 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1340 print_insn_arc_audio): New functions.
1341 * arc-opc.c (MULTSHIFT operand): Delete.
1342 (UNSIGNED, SATURATION): New operands.
1343 (mac, mul, mul64, mulu64): New insns.
1344 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1345 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1346 (host,graphics,audio extended and auxiliary regs): Define.
1347 (ss, sc, mh, ml): New suffixes.
1348 (arc_opcode_supported, arc_opval_supported): New functions.
1349 (insert_multshift, extract_multshift): Deleted.
1350 * disassemble.c (disassembler, case bfd_arch_arc): Call
1351 arc_get_disassembler to get disassembler routine.
1354 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1356 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1357 signed char fields to shorts, more portable.
1359 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1361 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1362 char fields as signed chars, since they may have negative values.
1364 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1366 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1367 (mycroft@netbsd.org).
1369 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1371 From "Logg, Ed" <elogg@ea.com>:
1372 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1373 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1376 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1378 * ppc-opc.c: Changes based on patch from David Edelsohn
1379 <edelsohn@mhpcc.edu>.
1380 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1383 (insert_tbr): New static function.
1384 (extract_tbr): New static function.
1385 (XFXFXM_MASK, XFXM): Define.
1386 (XSPRBAT_MASK, XSPRG_MASK): Define.
1387 (powerpc_opcodes): Add instructions to access special registers by
1388 name. Add mtcr and mftbu.
1390 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1392 * mips-opc.c (P3): Define.
1393 (mips_opcodes): Add mad and madu.
1395 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1397 * configure.in: Add W65 support.
1398 * disassemble.c: Likewise.
1399 * w65-opc.h, w65-dis.c: New files.
1401 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1403 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1407 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1409 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1411 * arc-opc.c (extract_reladdr): New function.
1412 (insert_reladdr): Store address right-shifted by 2.
1415 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1417 * mips-opc.c: Add dli as a synonym for li.
1420 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1422 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1424 (extraction fns): Insn argument now array of two words. Return pointer
1425 to value's table entry. All uses changed.
1426 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1427 (insert_multshift, extract_multshift): New fns.
1428 (arc_operands): Add support for cache bypass suffix. Add support for
1429 predefined aux regs. Modifier bits moved to flags field.
1430 (arc_opcodes): Likewise.
1431 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1432 New insn rlc. Update to syntax in programmer's manual.
1433 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1434 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1436 (arc_opcode_init_tables): New argument to indicate cpu type.
1437 (insert_reg): Handle predefined aux regs.
1438 (extract_reg): Likewise.
1439 (lookup_register): New fn.
1440 * arc-dis.c (arc_condition_codes): Deleted.
1441 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1442 Clean up modifier handling. Handle predefined aux regs.
1445 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1447 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1448 print something for reserved opcode values, even if it won't
1451 * mips-dis.c (_print_insn_mips): When initializing, shift right
1452 and mask, to avoid sign extension problems on the Alpha.
1454 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1458 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1460 * configure.in: Add ARC support.
1461 * disassemble.c: Likewise.
1462 * arc-dis.c, arc-opc.c: New files.
1465 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1467 * sh-opc.h (mov.l gbr): Get direction right.
1468 * sh-dis.c (print_insn_shx): New function.
1469 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1470 print opcodes with right byte order.
1472 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1474 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1475 to avoid conflicts with getopt.
1477 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1479 * hppa-dis.c (print_insn_hppa): Read the instruction using
1480 bfd_getb32, so that it works on a little endian or 64 bit host.
1481 Remove unused local variable op.
1483 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1485 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1486 addu does not work correctly if -mips3.
1488 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1490 * a29k-dis.c (print_special): Add special register names defined
1491 on 29030, 29040 and 29050.
1492 (print_insn): Handle new operand type 'I'.
1494 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1496 * Makefile.in (INSTALL): Use top level install.sh script.
1498 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1500 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1501 that it works on a little endian host.
1503 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1505 * configure.in: Use ${config_shell} when running config.bfd.
1507 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1509 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1511 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1513 * a29k-dis.c (print_insn): Print the opcode.
1515 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1517 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1519 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1521 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1523 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1525 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1526 which store a value into memory.
1528 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1530 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1531 * arm-dis.c, arm-opc.h: New files.
1533 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1535 * Makefile.in (ns32k-dis.o): Add dependency.
1536 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1537 string, not as array of chars.
1539 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1541 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1543 * sparc-opc.c: Added sparclite extended FP operations, and
1544 versions of v9 impdep* instructions permitting specification of
1547 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1549 * i960-dis.c (reg_names): Now const.
1550 (struct sparse_tabent): New type, copied from array type in mem
1552 (ctrl): Local static array ctrl_tab now const.
1553 (cobr): Local static array cobr_tab now const.
1554 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1555 static variable mem_tab no longer explicitly initialized. Changed
1556 mem_init to const array of struct sparse_tabent.
1557 (reg): Local static variable reg_tab no longer explicitly
1558 initialized. Changed reg_init to const array of struct
1560 (ea): Local static array scale_tab now const.
1562 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1565 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1567 * configure.bat: the disassember needs to be enabled for
1568 "objdump -d" to work in djgpp.
1570 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1572 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1573 (invalid_float): Enabled general version, doesn't require running
1574 on ns32k host. Changed to take char* argument, and test for
1575 explicitly specified sizes, instead of using sizeof() on host CPU
1577 (INVALID_FLOAT): Cast first argument.
1578 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1579 list_P032, list_M032): Now const.
1580 (optlist, list_search): Made appropriate arguments now point to
1582 (print_insn_arg): Changed static array of one-character-string
1583 pointers into a static const array of characters; fixed sprintf
1584 statement accordingly.
1586 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1588 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1589 from distribution. A ns32k-dis.c from a previous distribution has
1590 been brought up to date and supports the new interface.
1592 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1594 * configure.in: add bfd_ns32k_arch target support.
1596 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1597 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1599 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1601 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1604 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1606 * h8300-dis.c, mips-dis.c: Don't use true and false.
1608 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1610 * configure.in: Change --with-targets to --enable-targets.
1612 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1614 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1615 opcodes to the first instruction with that opcode, to speed
1616 disassembly of large files. From ralphc@pyramid.com (Ralph
1619 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1621 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1623 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1625 * configure.bat: update to latest makefile.in
1627 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1629 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1630 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1631 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1632 slot insn is in a delay slot.
1633 * z8k-opc.h: (resflg): Fix patterns.
1634 * h8500-opc.h Fix CR insn patterns.
1636 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1638 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1639 "cmpl" before POWER versions, so that gas -many uses them.
1641 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1643 * disassemble.c: New file.
1644 * Makefile.in (OFILES): Add disassemble.o.
1645 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1646 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1647 binutils/configure.in.
1649 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1650 opcode being examined.
1652 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1654 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1655 (insert_ral, insert_ram, insert_ras): New functions.
1656 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1657 RAS for store with update.
1659 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1661 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1662 (edelsohn@npac.syr.edu).
1664 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1666 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1669 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1671 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1673 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1675 * ppc-opc.c (powerpc_operands): The signedp field has been
1676 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1677 instead. Add new operand SISIGNOPT.
1678 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1679 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1680 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1683 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1685 * i386-dis.c (struct private): Renamed to dis_private. `private'
1686 is a reserved word for dynix cc.
1688 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1690 * configure.in: Change error message to refer to bfd/config.bfd
1691 rather than bfd/configure.in.
1693 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1695 * ppc-opc.c: Define POWER2 as short alias flag.
1696 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1699 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1701 * i960-dis.c (print_insn_i960): Don't read a second word for
1702 opcodes 0, 1, 2 and 3.
1704 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1706 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1708 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1710 * m68881-ext.c: Removed; no longer used.
1711 * Makefile.in: Changed accordingly.
1713 * m68k-dis.c (ext_format_68881): Don't declare.
1714 (print_insn_m68k): If an instruction uses place 'i', it uses at
1715 least four fixed bytes.
1716 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1717 extended float, convert to double using floatformat_to_double, not
1718 ieee_extended_to_double, and fetch the data before converting it.
1720 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1722 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1723 davidj@ICSI.Berkeley.EDU (David Johnson).
1725 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1727 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1728 PowerPC uses bdnz[l][a].
1730 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1732 * dis-buf.c, i386-dis.c: Include sysdep.h.
1734 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1736 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1738 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1739 by Motorola PowerPC 601 with PPC_OPCODE_601.
1740 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1741 Disassemble Motorola PowerPC 601 instructions as well as normal
1742 PowerPC instructions.
1744 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1746 * i960-dis.c (reg, mem): Just use a static array instead of
1749 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1751 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1752 condition name index if this is for a negated condition.
1754 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1755 Floating point format for 'H' operand is backwards from normal
1756 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1757 operands (fmpyadd and fmpysub), handle bizarre register
1758 translation correctly for single precision format.
1760 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1761 or 'I' operands if the next format specifier is 'M' (fcmp
1762 condition completer).
1764 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1766 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1767 single number giving a bitmask for the MB and ME fields of an M
1768 form instruction. Change NB to accept 32, and turn it into 0;
1769 also turn 0 into 32 when disassembling. Seperated SH from NB.
1770 (insert_mbe, extract_mbe): New functions.
1771 (insert_nb, extract_nb): New functions.
1772 (SC_MASK): Mask out SA and LK bits.
1773 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1774 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1775 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1776 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1777 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1778 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1779 (powerpc_macros): Define table of macro definitions.
1780 (powerpc_num_macros): Define.
1782 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1783 if PPC_OPERAND_NEXT is set.
1785 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1787 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1788 char. Retrieve contents using bfd_getl32 instead of shifting.
1790 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1792 * ppc-opc.c: New file. Opcode table for PowerPC, including
1793 opcodes for POWER (RS/6000).
1794 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1795 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1796 (CFILES): Add ppc-dis.c.
1797 (ppc-dis.o, ppc-opc.o): New targets.
1798 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1800 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1802 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1803 No space before 'u', 'f', or 'N'.
1805 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1807 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1808 farther than we should.
1810 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1812 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1814 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1816 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1818 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1819 needs it, to prevent reading past the end of a section.
1821 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1823 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1824 Removed t,A case for la; always use t,A(b) case.
1826 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1828 From Ted Lemen <mellon@pepper.ncd.com>
1829 * mips-dis.c (print_insn_arg): Handle 'k'.
1830 * mips-opc.c: Make cache use k, not t.
1832 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1834 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1835 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1836 FLOAT_FORMAT_CODE to put out floating point register names.
1838 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1840 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1842 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1844 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1846 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1848 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1849 larger than 32. Moved dsxx32 variants first for disassembler.
1851 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1853 * z8kgen.c, z8k-opc.h: Add full lda information.
1855 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1857 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1858 movb instructions. Any necessary space will be emitted by
1859 the code to handle nullification completers.
1861 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1863 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1865 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1867 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1868 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1870 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1872 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1874 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1876 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1877 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1879 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1881 * m88k-dis.c (m88kdis): comment change. Remove space after
1883 (printop): handle new arg types DEC and XREG for m88110.
1885 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1887 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1888 type for absolute branch addresses. Delete special
1889 "ble" and "be" code in 'W' operand code.
1891 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1893 * mips-opc.c: Set hazard information correctly for branch
1894 likely instructions.
1896 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1898 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1899 info->fprintf_func for printing and info->print_address_func for
1902 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1904 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1906 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1908 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1909 Corrected second case of "b" for disassembler.
1911 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1913 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1914 to BFD swapping routines to correspond to BFD name changes.
1916 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1918 * mips-opc.c: Change div machine instruction to be z,s,t rather
1919 than s,t. Change div macro to be d,v,t rather than d,s,t.
1920 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1921 rem and remu which generates only the corresponding div
1922 instruction. This is for compatibility with the MIPS assembler,
1923 which only generates the simple machine instruction when an
1924 explicit destination of $0 is used.
1925 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1927 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1929 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1930 WR_31 hazard for bal, bgezal, bltzal.
1932 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1934 * hppa-dis.c (print_insn_hppa): Use print function
1935 from within the disassemble_info, not fprintf_filtered.
1937 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1939 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1940 Law, law@cs.utah.edu.)
1942 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1944 * mips-opc.c ("absu"): Removed.
1947 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1949 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1950 Changed hazard information to distinguish between memory load
1951 delays and coprocessor load delays.
1953 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1955 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1957 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1959 * configure.in: Don't pass cpu to config.bfd.
1961 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1963 * m88k-dis.c (m88kdis): Make class unsigned.
1965 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1967 * alpha-dis.c (print_insn_alpha): One branch format case was
1968 missing the instruction name.
1970 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1972 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1973 Add the arch-specific auxiliary files.
1974 (OFILES): Remove the arch-specific auxiliary files
1975 and use BFD_MACHINES instead of DIS_LIBS.
1976 * configure.in: Set BFD_MACHINES based on --with-targets option.
1978 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1980 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1983 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1985 * sparc-opc.c: Change CONST to const to deal with gcc
1986 -Dconst=__const -traditional.
1988 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1990 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1991 coprocessor instructions out of #if 0, and made them use new
1994 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1996 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1998 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2000 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2001 instruction, for use by the disassembler.
2003 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2004 hand-coded sign extensions that depended on 32-bit host ints.
2005 FIXME, we still depend on big-endian host bitfield ordering.
2006 (sparc_print_insn): Set the insn_info_valid field, and the
2007 other fields that describe the instruction being printed.
2009 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2011 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2012 `jmp' instead of just one of them.
2014 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2016 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2017 (fput_fp_reg_r): Renamed from fput_reg_r.
2018 (fput_fp_reg): New function.
2019 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2021 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2023 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2025 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2027 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2029 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2030 don't output a space.
2032 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2034 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2036 * mips-opc.c: New file, containing opcode table from
2037 ../include/opcode/mips.h.
2038 * Makefile.in: Add it.
2040 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2042 * m88k-dis.c: New file, moved in from gdb and changed to use the
2043 new dis-asm.h disassembler interface.
2044 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2045 (m88k-dis.o): New target.
2047 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2049 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2050 argument string const char * to correspond to opcode/mips.h.
2052 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2054 * mips-dis.c: Updated to account for name changes in new version
2056 * Makefile.in: Added header file dependencies.
2058 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2060 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2062 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2064 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2065 extend, rather than shifts.
2067 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2069 * Makefile.in: Undo 15 June change.
2071 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2073 * m68k-dis.c (print_insn_arg): Change return value to byte count
2075 * m68k-dis.c: Re-write to detect invalid operands before
2076 printing anything, so we can handle this the same way we
2077 handle invalid opcodes.
2079 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2081 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2083 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2085 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2088 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2090 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2092 * configure.in: Do make sysdep.h link.
2093 * Makefile.in: Search ../include. Don't search ../bfd.
2095 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2097 Changes from Jeff Law, law@cs.utah.edu:
2098 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2099 Do not print a space before the completers specified by
2102 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2104 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2105 defined, since gdb has been fixed.
2107 Changes from Jeff Law, law@cs.utah.edu:
2108 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2109 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2110 be a *disassemble_info, not a *FILE.
2111 * hppa-dis.c: Support 'd', '!', and 'a'.
2112 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2113 * hppa-dis.c: Delete cases which are no longer needed.
2115 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2117 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2119 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2121 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2124 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2126 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2127 * configure.in: No longer need to configure to get sysdep.h.
2129 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2131 * Patches from Jeffrey Law <law@cs.utah.edu>.
2132 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2133 templates for 1.1 FP computational instructions.
2135 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2137 * h8500-dis.c (print_insn_h8500): Address argument is type
2139 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2142 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2143 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2145 * sparc-dis.c (compare_opcodes): Move static declaration to
2148 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2150 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2151 instruction, remove unimp hack from 'l' argument.
2153 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2155 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2158 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2160 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2161 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2164 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2166 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2167 arrays of string pointers to 2-d arrays of chars, to save
2170 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2172 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2173 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2175 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2177 * hppa-dis.c: New file from Utah, adapted to new disassembler
2179 * Makefile.in: Include it.
2181 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2183 * sh-dis.c, sh-opc.h: New files.
2185 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2187 * alpha-dis.c, alpha-opc.h: New files.
2189 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2191 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2194 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2196 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2198 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2200 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2203 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2205 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2206 and double percent signs a few places.
2208 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2210 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2211 Use info->print_address_func not print_address.
2213 * dis-buf.c (generic_print_address): New function.
2215 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2217 * Makefile.in: Add sparc-dis.c.
2218 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2220 Add `add' instruction to the set that get checked
2221 for a preceding `sethi' in order to print an absolute address.
2222 * (print_insn): Disassembly prefers real instructions.
2223 (is_delayed_branch): Speed up.
2224 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2225 Still missing some float ops, and needs testing.
2226 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2227 F_ALIAS. Use printf, not fprintf, when not passing a file
2229 (compare_opcodes): Check that identical instructions have
2230 identical opcodes, complain otherwise.
2233 * Include reg_names.
2235 Use dis-asm.h/read_memory_func interface.
2237 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2239 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2240 deliberately return non-zero to setjmp from longjmp. Otherwise
2241 this code fails to compile.
2243 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2245 * m68k-dis.c: Fix prototype for fetch_arg().
2247 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2249 * dis-buf.c: New file, for new read_memory_func interface.
2250 Makefile.in (OFILES): Include it.
2251 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2252 Use new read_memory_func interface.
2254 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2256 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2257 * h8500-opc.h: Fix couple of opcodes.
2259 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2261 * Makefile.in: add dvi & installcheck targets
2263 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2265 * Makefile.in: Update for h8500-dis.c.
2267 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2269 * h8500-dis.c, h8500-opc.h: New files
2271 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2273 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2274 ../include/dis-asm.h.
2275 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2276 and ../gdb/m68k-pinsn.c).
2277 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2278 and ../gdb/i386-pinsn.c).
2279 * m68881-ext.c: New file. Moved definition of
2280 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2281 * Makefile.in: Adjust for new files.
2282 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2283 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2284 can be dis-assembled.
2286 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2288 * mips-dis.c (print_insn_arg): Now returns void.
2290 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2292 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2293 files that use the macros.
2295 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2297 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2298 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2299 (CFILES): Added mips-dis.c.
2301 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2303 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2304 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2306 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2308 * Makefile.in: Improve *clean rules.
2309 * configure.in: Allow a default host.
2311 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2313 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2314 files include other sysdep files
2316 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2318 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2320 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2322 * configure.in: For host support, use ../bfd/configure.host
2323 so it stays in sync with the ../bfd/hosts database.
2325 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2327 * configure.in: use cpu-vendor-os triple instead of nested cases
2329 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2331 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2332 *always* the wrong one.
2334 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2336 * z8kgen.c: added copyright info
2338 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2340 * z8k-dis.c (unparse_instr): prettier tabs
2341 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2343 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2345 * configure.in: Add ncr* configuration.
2346 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2347 picayune ANSI compilers happy.
2349 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2351 * configure.in (i386): Make i386 and i486 synonymous for now.
2352 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2354 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2356 * Makefile.in (install): Fix typo.
2358 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2360 * Makefile.in (make): Remove obsolete crud.
2361 (sparc-opc.o): Avoid Sun Make VPATH bug.
2363 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2365 * Makefile.in: since there are no SUBDIRS, remove rule and
2366 references of subdir_do.
2368 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2370 * Makefile.in (install): Get the library name right here too.
2371 Don't install bfd.h, since it's unrelated to this library. No
2372 subdirs to recurse into, either.
2373 (CFILES): The source file has a .c suffix, not .o.
2375 * sparc-opc.c: New file, moved from BFD.
2376 * Makefile.in (OFILES): Build it.
2378 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2380 * z8k-dis.c: fixed forward refferences of some declarations.
2382 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2384 * Makefile.in: get the name of the library right
2386 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2388 * z8k-dis.c: knows how to disassemble z8k stuff
2389 * z8k-opc.h: new file full of z8000 opcodes
2393 version-control: never