1 2009-04-17 DJ Delorie <dj@redhat.com
3 * mep-desc.c: Regenerate.
4 * mep-ibld.c: Regenerate.
5 * mep-opc.c: Regenerate.
6 * mep-opc.h: Regenerate.
8 2009-04-15 Anthony Green <green@moxielogic.com>
10 * moxie-opc.c, moxie-dis.c: Created.
11 * Makefile.am: Build the moxie source files.
12 * configure.in: Add moxie support.
13 * Makefile.in, configure: Rebuilt.
14 * disassemble.c (disassembler): Add moxie support.
17 2009-04-15 Jan Beulich <jbeulich@novell.com>
19 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
21 (pshab, pshaw, pshad, pshaq): Likewise.
22 * i386-tbl.h: Re-generate.
24 2009-04-08 DJ Delorie <dj@redhat.com
26 * mep-asm.c: Regenerate.
27 * mep-desc.c: Regenerate.
28 * mep-desc.h: Regenerate.
29 * mep-dis.c: Regenerate.
30 * mep-ibld.c: Regenerate.
31 * mep-opc.c: Regenerate.
32 * mep-opc.h: Regenerate.
34 2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
36 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
37 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
38 Reorder entries so the extended mnemonics are listed before tlbilx.
40 2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
42 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
44 (print_insn_powerpc): Make sure we only deprecate instructions using
45 the original dialect and not a modified dialect due to -Many handling.
46 Move the handling of the condition register and default operands to
47 the end of the if/else if/else chain.
48 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
49 instructions from newer processors are listed before older ones.
50 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
51 that have instructions with conflicting opcodes.
53 2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
55 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
58 2009-04-01 Christophe Lyon <christophe.lyon@st.com>
60 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
62 2009-03-30 Joseph Myers <joseph@codesourcery.com>
64 * arm-dis.c (print_insn): Also check section matches in backwards
65 search for mapping symbol.
67 2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
69 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
71 2009-03-18 Alan Modra <amodra@bigpond.net.au>
73 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
74 * Makefile.am: Run "make dep-am".
75 * Makefile.in: Regenerate.
76 * openrisc-opc.c: Regenerate.
78 2009-03-10 Nick Clifton <nickc@redhat.com>
80 * po/id.po: Updated Indonesian translation.
82 2009-03-10 Alan Modra <amodra@bigpond.net.au>
84 * ppc-dis.c: Include "opintl.h".
85 (struct ppc_mopt, ppc_opts): New.
86 (ppc_parse_cpu): New function.
87 (powerpc_init_dialect): Use it.
88 (print_ppc_disassembler_options): Dump options from ppc_opts.
89 Internationalize message.
91 2009-03-06 Nick Clifton <nickc@redhat.com>
93 * po/es.po: Updated Spanish translation.
95 2009-03-04 Alan Modra <amodra@bigpond.net.au>
98 * configure.in: Test for ld --as-needed support. Link shared
99 libopcodes against libm.
100 * configure: Regenerate.
102 2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
104 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
105 instructions from newer processors are listed before older ones.
107 2009-03-03 Alan Modra <amodra@bigpond.net.au>
109 * Makefile.am: Run "make dep-am".
110 (HFILES): Move lm32-desc.h and lm32-opc.h from..
112 * Makefile.in: Regenerate.
114 2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
116 * score7-dis.c: New file.
117 * Makefile.am: Add dependencies for score7-dis.c.
118 * Makefile.in: Regenerate.
119 * configure.in: Add score7-dis to score files.
120 * configure: Regenerate.
121 * score-dis.c: Add support for score7 architecture.
122 * score-opc.h: Likewise.
124 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
126 * configure: Regenerate.
128 2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
130 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
132 2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
134 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
135 the power7 and the isel instructions.
136 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
137 (insert_dm, extract_dm): Likewise.
138 (XB6): Update comment to include XX2 form.
139 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
140 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
141 (RemoveXX3DM): Delete.
142 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
143 "mftgpr">: Deprecate for POWER7.
144 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
145 "frsqrte.">: Deprecate the three operand form and enable the two
146 operand form for POWER7 and later.
147 <"wait">: Extend to accept optional parameter. Enable for POWER7.
148 <"waitsrv", "waitimpl">: Add extended opcodes.
149 <"ldbrx", "stdbrx">: Enable for POWER7.
150 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
151 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
152 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
153 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
154 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
155 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
156 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
157 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
158 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
159 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
160 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
161 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
162 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
163 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
164 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
165 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
166 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
167 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
168 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
169 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
170 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
171 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
172 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
173 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
174 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
175 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
176 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
177 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
178 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
179 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
180 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
181 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
182 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
183 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
184 "xxspltw", "xxswapd">: Add VSX opcodes.
186 2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
188 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
189 (operand_types): Remove Vex_Imm4.
191 * i386-opc.h (Vex_Imm4): Removed.
193 (i386_operand_type): Remove vex_imm4.
195 * i386-opc.tbl: Remove Vex_Imm4 comments.
196 * i386-init.h: Regenerated.
197 * i386-tbl.h: Likewise.
199 2009-02-23 Richard Earnshaw <rearnsha@arm.com>
201 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
202 vq{r}shr{u}n.s64 insnstructions.
204 2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
206 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
207 operand to be a float point register (FRT/FRS).
209 2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
211 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
212 dmfc2 and dmtc2 before the architecture-level variants.
214 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
216 * fr30-opc.c: Regenerate.
217 * frv-opc.c: Regenerate.
218 * ip2k-opc.c: Regenerate.
219 * iq2000-opc.c: Regenerate.
220 * lm32-opc.c: Regenerate.
221 * m32c-opc.c: Regenerate.
222 * m32r-opc.c: Regenerate.
223 * mep-opc.c: Regenerate.
224 * mt-opc.c: Regenerate.
225 * xc16x-opc.c: Regenerate.
226 * xstormy16-opc.c: Regenerate.
227 * tic54x-dis.c (print_instruction): Avoid compiler warning on
230 2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
232 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
234 2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
236 * ppc-opc.c: Update copyright year.
237 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
238 ordering for POWER4 and later and use the correct Server ordering.
240 2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
242 AVX Programming Reference (January, 2009)
243 * i386-dis.c (PREFIX_VEX_3A44): New.
244 (VEX_LEN_3A44_P_2): Likewise.
245 (PREFIX_VEX_3A48): Updated.
246 (VEX_LEN_3A4C_P_2): Likewise.
247 (prefix_table): Add PREFIX_VEX_3A44.
248 (vex_table): Likewise.
249 (vex_len_table): Add VEX_LEN_3A44_P_2.
251 * i386-opc.tbl: Add PCLMUL + AVX instructions.
252 * i386-tbl.h: Regenerated.
254 2009-02-03 Sandip Matte <sandip@rmicorp.com>
256 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
257 (mips_arch_choices): Add XLR entry.
258 * mips-opc.c (XLR): Define.
259 (mips_builtin_opcodes): Add XLR instructions.
261 2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
263 * Makefile.am: Add install-pdf target.
264 * po/Make-in: Add install-pdf target.
265 * Makefile.in: Regenerate.
267 2009-02-02 DJ Delorie <dj@redhat.com>
269 * mep-asm.c: Regenerate.
270 * mep-desc.c: Regenerate.
271 * mep-desc.h: Regenerate.
272 * mep-dis.c: Regenerate.
273 * mep-ibld.c: Regenerate.
274 * mep-opc.c: Regenerate.
275 * mep-opc.h: Regenerate.
277 2009-01-29 Mark Mitchell <mark@codesourcery.com>
279 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
282 2009-01-28 Chao-ying Fu <fu@mips.com>
284 * mips-opc.c (suxc1): Add the flag of FP_D.
286 2009-01-20 Alan Modra <amodra@bigpond.net.au>
288 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
289 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
290 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
291 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
292 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
293 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
294 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
295 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
297 2009-01-16 Alan Modra <amodra@bigpond.net.au>
299 * configure.in (commonbfdlib): Delete.
300 (SHARED_LIBADD): Add pic libiberty if such is available.
301 * configure: Regenerate.
302 * po/POTFILES.in: Regenerate.
304 2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
306 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
307 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
308 operand form and enable the four operand form for POWER6 and later.
309 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
310 three operand form for POWER6 and later.
312 2009-01-14 Mike Frysinger <vapier@gentoo.org>
314 * bfin-dis.c (OUTS): Use "%s" as format string.
316 2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
318 * i386-gen.c (cpu_flag_init): Remove a white space.
319 (operand_type_init): Likewise.
321 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
323 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
324 * i386-tbl.h: Regenerated.
326 2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
328 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
329 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
332 2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
334 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
335 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
336 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
337 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
340 (set_bitfield): Take an argument, lineno. Don't report lineno
341 on error if it is -1.
342 (process_i386_cpu_flag): Take an argument, lineno.
343 (process_i386_opcode_modifier): Likewise.
344 (process_i386_operand_type): Likewise.
345 (output_i386_opcode): Likewise.
346 (opcode_hash_entry): Add lineno.
347 (process_i386_opcodes): Updated.
348 (process_i386_registers): Likewise.
349 (process_i386_initializers): Likewise.
351 * i386-opc.h (CpuP4): Removed.
355 (CpuSYSCALL): Likewise.
357 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
358 cpuclflush and cpusyscall.
360 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
362 * i386-init.h: Regenerated.
363 * i386-tbl.h: Likewise.
365 2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
367 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
368 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
369 (cpu_flags): Add CpuRdtscp.
370 (set_bitfield): Remove CpuSledgehammer check.
372 * i386-opc.h (CpuRdtscp): New.
374 (i386_cpu_flags): Add cpurdtscp.
376 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
377 * i386-init.h: Regenerated.
378 * i386-tbl.h: Likewise.
380 2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
382 * ppc-opc.c (PPCNONE): Define.
384 (powerpc_opcodes): Initialize the new "deprecated" field.
386 2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
388 AVX Programming Reference (December, 2008)
389 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
390 (VEX_LEN_E7_P_2_M_0): Likewise.
391 (VEX_LEN_2C_P_1): Updated.
392 (VEX_LEN_E8_P_2): Likewise.
393 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
394 (mod_table): Likewise.
396 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
397 * i386-tbl.h: Regenerated.
399 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
401 * i386-gen.c (process_copyright): Update for 2009.
403 * i386-init.h: Regenerated.
404 * i386-tbl.h: Likewise.
406 2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
408 AVX Programming Reference (December, 2008)
409 * i386-dis.c (OP_VEX_FMA): Removed.
410 (OP_EX_VexW): Likewise.
411 (OP_EX_VexImmW): Likewise.
412 (OP_XMM_VexW): Likewise.
413 (VEXI4_Fixup): Likewise.
414 (VPERMIL2_Fixup): Likewise.
417 (Vex128FMA): Likewise.
421 (EXVexImmW): Likewise.
423 (VPERMIL2): Likewise.
424 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
425 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
426 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
427 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
428 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
429 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
430 (get_vex_imm8): Likewise.
431 (OP_EX_VexReg): Likewise.
432 vpermil2_op): Likewise.
434 (vex_w_dq_mode): Likewise.
435 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
436 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
437 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
439 (PREFIX_VEX_38DB): Likewise.
440 (PREFIX_VEX_3A4A): Likewise.
441 (PREFIX_VEX_3A60): Likewise.
442 (PREFIX_VEX_3ADF): Likewise.
443 (VEX_LEN_3ADF_P_2): Likewise.
444 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
445 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
446 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
447 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
448 PREFIX_VEX_3896...PREFIX_VEX_389F,
449 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
450 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
451 (vex_table): Likewise.
452 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
453 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
454 (putop): Support "%XW".
455 (intel_operand_size): Handle vex_w_dq_mode.
457 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
459 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
460 instructions. Add new FMA instructions.
461 * i386-tbl.h: Regenerated.
463 2009-01-02 Matthias Klose <doko@ubuntu.com>
465 * or32-opc.c (or32_print_register, or32_print_immediate,
466 disassemble_insn): Don't rely on undefined sprintf behaviour.
468 For older changes see ChangeLog-2008
474 version-control: never