1 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
3 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
4 * acinclude.m4: Just include acinclude.m4 from BFD.
5 * aclocal.m4, configure: Rebuild.
7 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
9 * Makefile.am: New file, based on old Makefile.in.
10 * acconfig.h: New file.
11 * acinclude.m4: New file.
12 * stamp-h.in: New file.
13 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
14 Removed shared library handling; now handled by libtool. Replace
15 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
16 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
17 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
18 handling in AC_OUTPUT.
19 * dep-in.sed: Change .o to .lo.
20 * Makefile.in: Now built with automake.
21 * aclocal.m4: Now built with aclocal.
22 * config.in, configure: Rebuild.
24 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
26 * mips-opc.c: Fix typo/thinko in "eret" instruction.
29 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
31 * mips-opc.c: Fix coding of mtsa.
34 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
36 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
38 * sparc-dis.c (sorted_opcodes): New static local.
39 (struct opcode_hash): `opcode' is pointer to const element.
40 (build_hash): First arg is now table of sorted pointers.
41 (print_insn_sparc): Sort opcodes by sorting table of pointers.
42 (compare_opcodes): Update.
44 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
46 * cgen-opc.c: #include <ctype.h>.
47 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
48 Handle case insensitive hashing.
49 (hash_keyword_value): Change type of `value' to unsigned int.
51 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
53 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
54 precision FP, mark it as such. Likewise for double precision
55 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
58 (mips_builtin_opcodes): Remove non-existant r5900 instructions
62 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
64 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
65 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
68 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
70 * ppc-opc.c (extract_nsi): make unsigned expression signed before
72 (UNUSED): remove one level of parens, so MSVC doesn't choke on
73 nesting depth when all the macros are expanded.
75 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
77 * sparc-opc.c: The fcmp v9a instructions take an integer register
78 as a destination, not a floating point register. From Christian
79 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
81 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
83 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
84 syntax. From Roman Hodek
85 <rnhodek@faui22c.informatik.uni-erlangen.de>.
87 * i386-dis.c (twobyte_has_modrm): Fix pand.
89 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
91 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
93 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
95 * arm-dis.c: Add prototypes for arm_decode_shift and
98 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
100 * mips-opc.c: Add r3900 insns.
102 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
104 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
105 print delay slot instructions on the same line. When using a PC
106 relative load, add a comment with the value being loaded if it can
109 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
111 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
112 to pushS/popS for segment regs and byte constant so that
113 pushw/popw printed when in 16 bit data mode.
115 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
116 print cbtw, cwtd in 16 bit data mode.
117 * i386-dis.c (putop): extra case W to support above.
119 * i386-dis.c (print_insn_x86): print addr32 prefix when given
120 address size prefix in 16 bit address mode.
122 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
124 * sh-dis.c: Reindent. Rename local variable fprintf to
127 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
129 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
131 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
133 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
135 * mips16-opc.c (mip16_opcodes): same.
137 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
139 * m68k-opc.c (moveb): Change $d to %d.
141 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
143 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
144 (twobyte_has_modrm): Likewise.
146 (OP_MMX, OP_EM, OP_MS): New static functions.
148 * i386-dis.c: Revert patch of April 4. The output now matches
151 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
153 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
156 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
158 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
160 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
162 * Makefile.in (install): Depend upon installdirs.
163 (installdirs): New target.
165 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
167 From Thomas Graichen <graichen@rzpd.de>:
168 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
169 * configure: Rebuild.
171 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
173 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
174 Delete string{,s}.h support.
176 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
178 * cgen-asm.c (cgen_parse_operand_fn): New global.
179 (cgen_parse_{{,un}signed_integer,address}): Update call to
180 cgen_parse_operand_fn.
181 (cgen_init_parse_operand): New function.
182 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
183 from cgen_asm_init_parse.
184 (m32r_cgen_assemble_insn): New operand `errmsg'.
185 Delete call to as_bad, return error message to caller.
186 (m32r_cgen_asm_hash_keywords): #if 0 out.
188 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
190 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
192 [case 'J']: Fix typo in register name.
194 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
196 * configure.in: Substitute SHLIB_LIBS.
197 * configure: Rebuild.
198 * Makefile.in (SHLIB_LIBS): New variable.
199 ($(SHLIB)): Use $(SHLIB_LIBS).
201 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
203 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
205 * cgen-opc.c (hash_keyword_name): Improve algorithm.
207 * disassemble.c (disassembler): Handle m32r.
209 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
211 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
212 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
213 * Makefile.in (CFILES): Add them.
214 (ALL_MACHINES): Add them.
215 (dependencies): Regenerate.
216 * configure.in (cgen_files): New variable.
217 (bfd_m32r_arch): Add entry.
218 * configure: Regenerate.
220 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
222 * configure.in: Correct file names for bfd_mn10[23]00_arch.
223 * configure: Rebuild.
225 * Makefile.in: Rebuild dependencies.
227 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
229 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
232 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
234 * Branched binutils 2.8.
236 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
238 * m10200-dis.c: Rename from mn10200-dis.c.
239 * m10200-opc.c: Rename from mn10200-opc.c.
240 * m10300-dis.c: Rename from mn10300-dis.c
241 * m10300-opc.c: Rename from mn10300-opc.c.
242 * Makefile.in: Update accordingly.
244 * mips16-opc.c: Add mul and dmul macros.
246 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
248 * makefile.vms: Update CFLAGS, add clean target.
250 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
252 * mips-opc.c: Add "wait". From Ralf Baechle
253 <ralf@gnu.ai.mit.edu>.
255 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
256 * configure, config.in: Rebuild.
257 * sysdep.h: Include <stdlib.h> if it exists.
258 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
260 * Makefile.in: Rebuild dependencies.
262 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
264 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
265 Andrew Bray <andy@madhouse.demon.co.uk>.
267 * mips-opc.c: Add cast when setting mips_opcodes.
270 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
272 * v850-dis.c (disassemble): Fix sign extension problem.
273 * v850-opc.c (extract_d*): Fix sign extension problems to make
274 disassembly calculate branch offsets correctly.
277 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
279 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
281 * mips-opc.c: Add dctr and dctw.
284 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
286 * d30v-dis.c (print_insn): Change the way signed constants
289 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
291 * Makefile.in (BFD_H): New variable.
292 (HFILES): New variable.
293 (CFILES): Add all C files.
294 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
295 Delete old dependencies, and build new ones.
296 * dep-in.sed: New file.
298 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
300 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
302 start-sanitize-coldfire
303 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
305 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
308 end-sanitize-coldfire
309 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
311 * mn10200-opc.c: Change "trap" to "syscall".
312 * mn10300-opc.c: Add new "syscall" instruction.
314 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
316 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
317 mulul insns on the coldfire.
319 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
321 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
322 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
323 (print_insn_little_arm): Likewise.
325 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
327 Based on patches from H.J. Lu <hjl@lucon.org>:
328 * i386-dis.c (fetch_data): Add prototype.
329 * m68k-dis.c (fetch_data): Add prototype.
330 (dummy_print_address): Add prototype. Make static.
331 * ppc-opc.c (valid_bo): Add prototype.
332 * sparc-dis.c (build_hash_table): Add prototype.
333 (is_delayed_branch, compute_arch_mask): Add prototypes.
334 (print_insn_sparc): Make several local variables const.
335 (compare_opcodes): Change arguments to const PTR. Add prototype.
336 * sparc-opc.c (arg): Change name field to be const.
337 (lookup_name, lookup_value): Add prototypes. Change table and
338 name parameters to be const.
339 (sparc_encode_asi): Change name parameter to be const.
340 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
341 (sparc_encode_sparclet_cpreg): Likewise.
342 (sparc_decode_asi): Change return type to be const.
343 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
344 (sparc_decode_sparclet_cpreg): Likewise.
346 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
348 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
349 Solaris doesn't like the combined options, and the -f is
351 (stamp-tshlink, install): Likewise.
353 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
355 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
358 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
360 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
362 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
364 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
367 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
369 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
372 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
374 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
376 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
378 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
381 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
383 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
384 floatformat_to_double to make portable.
385 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
388 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
390 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
391 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
393 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
395 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
396 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
399 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
401 * tic80-opc.c (LSI_SCALED): Renamed from this ...
402 (OFF_SL_BR_SCALED): ... to this, and added the flag
403 TIC80_OPERAND_BASEREL to the flags word.
404 (tic80_opcodes): Replace all occurances of LSI_SCALED with
408 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
410 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
411 Change mips_opcodes from const array to a pointer,
412 and change bfd_mips_num_opcodes from const int to int,
413 so that we can increase the size of the mips opcodes table
417 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
419 * tic80-opc.c (tic80_predefined_symbols): Revert change to
420 store BITNUM values in the table in one's complement form
421 to match behavior when assembler is given a raw numeric
422 value for a BITNUM operand.
423 * tic80-dis.c (print_operand_bitnum): Ditto.
427 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
429 * d30v-opc.c: Removed references to FLAG_X.
432 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
434 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
437 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
439 * Makefile.in: Added d30v object files.
440 * configure: (bfd_d30v_arch) Rebuilt.
441 * configure.in: (bfd_d30v_arch) Added new case.
442 * d30v-dis.c: New file.
443 * d30v-opc.c: New file.
444 * disassemble.c (disassembler) Add entry for d30v.
448 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
450 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
451 representations for the floating point BITNUM values.
453 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
455 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
456 in the table in one's complement form, as they appear in the
458 (tic80_symbol_to_value): Use macros to access predefined
460 (tic80_value_to_symbol): Ditto.
461 (tic80_next_predefined_symbol): New function.
462 * tic80-dis.c (print_operand_bitnum): Remove code that did
463 one's complement for BITNUM values.
467 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
469 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
472 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
474 * makefile.vms: Remove 8 bit characters. Update to latest
477 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
479 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
481 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
483 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
484 (IMM24_PCREL): Likewise.
486 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
488 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
489 address for an extended PC relative instruction that is not a
492 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
494 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
498 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
500 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
501 (tic80_opcodes): Sort entries so that long immediate forms
502 come after short immediate forms, making it easier for
503 assembler to select the right one for a given operand.
506 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
508 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
510 (print_insn_mips16): Likewise.
513 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
515 * mips-opc.c: add r5900.
519 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
521 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
522 a symbol class that restricts translation to just that
523 class (general register, condition code, etc).
525 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
527 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
528 and REG_DEST_E for register operands that have to be
529 an even numbered register. Add REG_FPA for operands that
530 are one of the floating point accumulator registers.
531 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
532 (tic80_opcodes): Change entries that need even numbered
533 register operands to use the new operand table entries.
534 Add "or" entries that are identical to "or.tt" entries.
537 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
539 * mips16-opc.c: Add new cases of exit instruction for
541 * mips-dis.c (print_mips16_insn_arg): Display floating point
542 registers in operands of exit instruction. Print `$' before
543 register names in operands of entry and exit instructions.
546 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
548 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
549 pairs for all predefined symbols recognized by the assembler.
550 Also used by the disassembling routines.
551 (tic80_symbol_to_value): New function.
552 (tic80_value_to_symbol): New function.
553 * tic80-dis.c (print_operand_control_register,
554 print_operand_condition_code, print_operand_bitnum):
555 Remove private tables and use tic80_value_to_symbol function.
558 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
560 * d10v-dis.c (print_operand): Change address printing
561 to correctly handle PC wrapping. Fixes PR11490.
563 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
565 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
568 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
570 * mips-dis.c (print_insn_mips16): Set insn_info information.
571 (print_mips16_insn_arg): Likewise.
573 * mips-dis.c (print_insn_mips16): Better handling of an extend
574 opcode followed by an instruction which can not be extended.
576 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
578 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
579 coldfire moveb instruction to not allow an address register as
580 destination. Although the documentation does not indicate that
581 this is invalid, experiments uncovered unexpected behavior.
582 Added a comment explaining the situation. Thanks to Andreas
583 Schwab for pointing this out to me.
586 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
588 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
589 entries are presorted so that entries with the same mnemonic are
590 adjacent to each other in the table. Sort the entries for each
591 instruction so that this is true.
594 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
596 * m68k-dis.c: Include <libiberty.h>.
597 (print_insn_m68k): Sort the opcode table on the most significant
598 nibble of the opcode.
601 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
603 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
604 "vsub", "vst", "xnor", and "xor" instructions.
605 (V_a1): Renamed from V_a, msb of accumulator reg number.
606 (V_a0): Add macro, lsb of accumulator reg number.
608 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
610 * tic80-dis.c (print_insn_tic80): Broke excessively long
611 function up into several smaller ones and arranged for
612 the instruction printing function to be callable recursively
613 to print vector instructions that have both a load and a
614 math instruction packed into a single opcode.
615 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
616 to explain why it comes after the other vector opcodes.
619 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
621 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
622 move insns to handle immediate operands.
624 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
626 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
627 fix operand mask in the "moveml" entries for the coldfire.
630 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
632 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
633 New macros for building vector instruction opcodes.
634 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
635 FMT_LI, which were unused. The field is now a flags field.
636 Remove some opcodes that are possible, but illegal, such
637 as long immediate instructions with doubles for immediate
638 values. Add "vadd" and "vld" instructions.
640 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
642 * tic80-opc.c (tic80_operands): Reorder some table entries to make
643 the order more logical. Move the shift alias instructions ("rotl",
644 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
645 interspersed with the regular sr.x and sl.x instructions. Add
646 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
647 "sub", "subu", "swcr", and "trap".
649 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
651 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
652 (OFF_SL_PC): Renamed from OFF_SL.
653 (OFF_SS_BR): New operand type for base relative operand.
654 (OFF_SL_BR): New operand type for base relative operand.
655 (REG_BASE): New operand type for base register operand.
656 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
657 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
658 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
660 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
661 10 char field, padded with spaces on rhs, rather than a string
662 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
663 than old TIC80_OPERAND_RELATIVE. Add support for new
664 TIC80_OPERAND_BASEREL flag bit.
666 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
668 * tic80-dis.c (print_insn_tic80): Print floating point operands
670 * tic80-opc.c (SPFI): Add single precision floating point
671 immediate operand type.
672 (ROTATE): Add rotate operand type for shifts.
673 (ENDMASK): Add for shifts.
674 (n): Macro for the 'n' bit.
675 (i): Macro for the 'i' bit.
676 (PD): Macro for the 'PD' field.
677 (P2): Macro for the 'P2' field.
678 (P1): Macro for the 'P1' field.
679 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
683 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
685 * mn10200-dis.c (disassemble): Mask off unwanted bits after
686 adding in current address for pc-relative operands.
689 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
691 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
692 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
693 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
694 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
695 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
696 REG_BASE_M_SI, REG_BASE_M_LI respectively.
697 (REG_SCALED, LSI_SCALED): New operand types.
698 (E): New macro for 'E' bit at bit 27.
699 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
700 opcodes, including the various size flavors (b,h,w,d) for
701 the direct load and store instructions.
703 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
705 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
707 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
708 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
709 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
710 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
711 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
712 masks with "MASK_* & ~M_*" to get the M bit reset.
713 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
715 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
717 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
718 correctly. Add support for printing TIC80_OPERAND_BITNUM and
719 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
721 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
722 CC, SICR, and LICR table entries.
723 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
724 "bcnd", and "brcr" opcodes.
727 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
729 * ppc-opc.c (powerpc_operands): Make comment match the
730 actual fields (no shift field).
731 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
733 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
734 partial implementation, work in progress.
735 * tic80-opc.c (tic80_operands): Begin construction operands table.
736 (tic80_opcodes): Continue populating opcodes table and start
737 filling in the operand indices.
738 (tic80_num_opcodes): Add this.
741 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
743 * m68k-opc.c: Add #B case for moveq.
745 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
747 * mn10300-dis.c (disassemble): Make sure all variables are initialized
748 before they are used.
751 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
753 * v850-opc.c (v850_opcodes): Put curly-braces around operands
754 for "breakpoint" instruction.
757 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
759 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
760 (dep): Use ALL_CFLAGS rather than CFLAGS.
763 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
765 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
769 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
771 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
773 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
776 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
778 * mips16-opc.c: Add "abs".
781 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
783 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
784 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
785 (disassembler): Add bfd_arch_tic80 support to set disassemble
787 * tic80-dis.c (print_insn_tic80): Add stub.
789 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
791 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
792 * configure: Regenerate with autoconf.
793 * tic80-dis.c: Add file.
794 * tic80-opc.c: Add file.
797 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
799 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
801 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
803 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
804 (mn10200_opcodes): Use it for some logicals and btst insns.
805 Add "break" and "trap" instructions.
807 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
809 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
811 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
813 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
814 relative load or add now depends upon whether the instruction is
817 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
819 * mn10200-dis.c: Finish writing disassembler.
820 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
821 Fix mask for "jmp (an)".
823 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
824 handle endianness issues for mn10300.
826 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
828 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
830 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
831 instruction. Fix opcode field for "movb (imm24),dn".
833 * mn10200-opc.c (mn10200_operands): Fix insertion position
836 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
838 * mn10200-opc.c: Create mn10200 opcode table.
839 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
840 but moving along nicely.
842 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
844 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
846 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
848 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
849 specifiers for fmovem* instructions.
851 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
853 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
855 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
857 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
860 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
862 * mn10300-opc.c: Add some comments explaining the various
865 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
867 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
869 * m68k-dis.c (print_insn_arg): Handle new < and > operand
872 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
873 operand specifiers in fmovm* instructions.
875 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
877 * ppc-opc.c (insert_li): Give an error if the offset has the two
878 least significant bits set.
880 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
882 * mips-dis.c (print_insn_mips16): Separate the instruction from
883 the arguments with a tab, not a space.
885 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
887 * mn10300-dis.c (disasemble): Finish conversion to '$' as
890 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
893 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
895 * configure: Rebuild with autoconf 2.12.
897 Add support for mips16 (16 bit MIPS implementation):
898 * mips16-opc.c: New file.
899 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
900 (mips16_reg_names): New static array.
901 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
902 after seeing a 16 bit symbol.
903 (print_insn_little_mips): Likewise.
904 (print_insn_mips16): New static function.
905 (print_mips16_insn_arg): New static function.
906 * mips-opc.c: Add jalx instruction.
907 * Makefile.in (mips16-opc.o): New target.
908 * configure.in: Use mips16-opc.o for bfd_mips_arch.
909 * configure: Rebuild.
911 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
913 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
914 operand specifiers in *save, *restore and movem* instructions.
916 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
919 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
920 register operands for immediate arithmetic, not, neg, negx, and
921 set according to condition instructions.
923 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
924 specifier of the effective-address operand in immediate forms of
925 arithmetic instructions. The specifier for the immediate operand
926 notes how and where the constant will be stored.
928 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
930 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
933 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
936 * mn10300-dis.c (disassemble): Prefix registers with '%'.
938 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
940 * mn10300-dis.c (disassemble): Handle register lists.
942 * mn10300-opc.c: Fix handling of register list operand for
943 "call", "ret", and "rets" instructions.
945 * mn10300-dis.c (disassemble): Print PC-relative and memory
946 addresses symbolically if possible.
947 * mn10300-opc.c: Distinguish between absolute memory addresses,
948 pc-relative offsets & random immediates.
950 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
952 (disassemble): Handle SPLIT and EXTENDED operands.
954 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
956 * mn10300-dis.c: Rough cut at printing some operands.
958 * mn10300-dis.c: Start working on disassembler support.
959 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
961 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
963 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
965 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
967 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
969 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
971 * mn10300-opc.c (mn10300_opcodes): Demand parens around
972 register argument is calls and jmp instructions.
974 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
976 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
977 getx operand. Fix opcode for mulqu imm,dn.
979 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
981 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
982 in MN10300_OPERAND_SPLIT operands for how many bits
983 appear in the basic insn word. Add IMM32_HIGH24,
984 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
985 (mn10300_opcodes): Use new operands as needed.
987 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
988 for bset, bclr, btst instructions.
989 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
991 * mn10300-opc.c (mn10300_operands): Remove many redundant
992 operands. Update opcode table as appropriate.
993 (IMM32): Add MN10300_OPERAND_SPLIT flag.
994 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
996 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
998 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
999 operands (for indexed load/stores). Fix bitpos for DI
1000 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1001 few instructions that insert immediates/displacements in the
1002 middle of the instruction. Add IMM8E for 8 bit immediate in
1003 the extended part of an instruction.
1004 (mn10300_operands): Use new opcodes as appropriate.
1006 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1008 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1009 sequential so the assembler never parallelizes it with
1012 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1014 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1015 a data/address register that appears in register field 0
1016 and register field 1.
1017 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1019 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1021 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1022 standard disassembly.
1024 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1025 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1026 Recategorize PALcode instructions.
1029 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1031 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1034 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1036 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1037 there are no operand types.
1040 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1042 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1044 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1047 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1049 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1052 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1054 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1055 and sst.w instructions.
1057 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1061 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1063 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1066 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1068 * ppc-opc.c (PPCPWR2): Define.
1069 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1072 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1074 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1075 field for movhu instruction.
1078 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1079 cast value to "long" not "signed long" to keep hpux10
1083 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1085 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1088 * mn10300-opc.c (FMT*): Remove definitions.
1090 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1091 for shift-by-register opcodes.
1093 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1094 into [AD][MN][01] for encoding the position of the register
1097 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1099 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1100 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1102 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1104 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1105 Fix various typos. Add "PAREN" operand.
1106 (MEM, MEM2): Define.
1107 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1108 operands. Fix several typos.
1110 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1113 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1115 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1116 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1118 (mn10300_opcodes): Break opcode format out into its own field.
1119 Update many operand fields to deal with signed vs unsigned
1120 issues. Fix one or two typos in the "mov" instruction
1121 opcode, mask and/or operand fields.
1123 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1125 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1126 m68851 wasn't reset.
1128 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1130 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1131 all opcodes. Very rough cut at operands for all opcodes.
1133 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1136 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1138 * mn10200-opc.c, mn10300-opc.c: New files.
1139 * mn10200-dis.c, mn10300-dis.c: New files.
1140 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1141 * disassemble.c: Break mn10x00 support into 10200 and 10300
1143 * configure.in: Likewise.
1144 * configure: Rebuilt.
1146 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1148 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1150 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1152 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1154 * disassemble (ARCH_mn10x00): Define.
1155 (disassembler): Handle bfd_arch_mn10x00.
1156 * configure.in: Recognize bfd_mn10x00_arch.
1157 * configure: Rebuilt.
1159 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1161 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1162 accordingly. Don't declare functions using op_rtn.
1165 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1167 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1168 params to be more standard.
1169 * (disassemble): Print absolute addresses and symbolic names for
1170 branch and jump targets.
1171 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1173 * (v850_opcodes): Add breakpoint insn.
1176 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1178 * m68k-opc.c: Move the fmovemx data register cases before the
1179 other cases, so that they get recognized before the data register
1180 does gets treated as a degenerate register list.
1182 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1184 * mips-opc.c: Add a case for "div" and "divu" with two registers
1185 and a destination of $0.
1187 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1189 * mips-dis.c (print_insn_arg): Add prototype.
1190 (_print_insn_mips): Ditto.
1192 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1194 * mips-dis.c (print_insn_arg): Print condition code registers as
1197 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1199 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1202 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1204 * v850-dis.c (disassemble): Make static. Provide prototype.
1206 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1208 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1211 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1213 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1214 ']' characters into the output stream.
1215 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1216 Add "memop" field to all opcodes (for the disassembler).
1217 Reorder opcodes so that "nop" comes before "mov" and "jr"
1218 comes before "jarl".
1220 * v850-dis.c (print_insn_v850): Fix typo in last change.
1222 * v850-dis.c (print_insn_v850): Properly handle disassembling
1223 a two byte insn at the end of a memory region when the memory
1224 region's size is only two byte aligned.
1226 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1228 * v850-dis.c (v850_reg_names): Define.
1229 (v850_sreg_names, v850_cc_names): Likewise.
1230 (disassemble): Very rough cut at printing operands (unformatted).
1232 * v850-opc.c (BOP_MASK): Fix.
1233 (v850_opcodes): Fix mask for jarl and jr.
1235 * v850-dis.c: New file. Skeleton for disassembler support.
1236 * Makefile.in Remove v850 references, they're not needed here
1237 and they weren't being sanitized away.
1238 * configure.in: Add v850-dis.o when building v850 toolchains.
1239 * configure: Rebuilt.
1240 * disassemble.c (disassembler): Call v850 disassembler.
1242 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1243 (insert_d8_6, extract_d8_6): New functions.
1244 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1245 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1247 (IF4A, IF4B): Use "D7" instead of "D7S".
1248 (IF4C, IF4D): Use "D8_7" instead of "D8".
1249 (IF4E, IF4F): New. Use "D8_6".
1250 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1251 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1253 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1254 (v850_operands): Change D16 to D16_15, use special insert/extract
1255 routines. New new D16 that uses the generic insert/extract code.
1256 (IF7A, IF7B): Use D16_15.
1257 (IF7C, IF7D): New. Use D16.
1258 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1260 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1261 message. Issue an error if the branch offset is odd.
1263 * v850-opc.c: Add notes about needing special insert/extract
1264 for all the load/store insns, except "ld.b" and "st.b".
1266 * v850-opc.c (insert_d22, extract_d22): New functions.
1267 (v850_operands): Use insert_d22 and extract_d22 for
1269 (insert_d9): Fix range check.
1271 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1273 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1274 and set bits field to D9 and D22 operands.
1276 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1278 * v850-opc.c (v850_operands): Define SR2 operand.
1279 (v850_opcodes): "ldsr" uses R1,SR2.
1281 * v850-opc.c (v850_opcodes): Fix opcode specs for
1282 sld.w, sst.b, sst.h, sst.w, and nop.
1284 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1286 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1287 end of the opcode table.
1290 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1292 * d10v-opc.c (pre_defined_registers): Added register pairs,
1293 "r0-r1", "r2-r3", etc.
1296 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1298 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1299 Create I16U for an unsigned 16bit mmediate operand.
1300 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1302 * v850-opc.c (v850_operands): Define EP operand.
1303 (IF4A, IF4B, IF4C, IF4D): Use EP.
1305 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1306 with immediate operand, "movhi". Tweak "ldsr".
1308 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1309 correct. Get sld.[bhw] and sst.[bhw] closer.
1311 * v850-opc.c (v850_operands): "not" is a two byte insn
1313 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1315 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1317 * v850-opc.c (two): Get order of words correct.
1319 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1321 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1322 register source and destination operands.
1323 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1325 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1326 same thinko in "trap" opcode.
1328 * v850-opc.c (v850_opcodes): Add initializer for size field
1331 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1332 Add D8 for 8-bit unsigned field in short load/store insns.
1333 (IF4A, IF4D): These both need two registers.
1334 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1335 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1336 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1337 for "ldsr" and "stsr".
1338 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1341 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1342 short store word (sst.w).
1344 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1346 * v850-opc.c (v850_operands): Added insert and extract fields,
1347 pointers to functions that handle unusual operand encodings.
1349 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1351 * v850-opc.c (v850_opcodes): Enable "trap".
1353 * v850-opc.c (v850_opcodes): Fix order of displacement
1354 and register for "set1", "clr1", "not1", and "tst1".
1356 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1358 * v850-opc.c (v850_operands): Add "B3" support.
1359 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1362 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1364 * v850-opc.c: Close unterminated comment.
1366 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1368 * v850-opc.c (v850_operands): Add flags field.
1369 (v850_opcodes): add move opcodes.
1371 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1373 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1374 * configure: (bfd_v850v_arch) Add new case.
1375 * configure.in: (bfd_v850_arch) Add new case.
1376 * v850-opc.c: New file.
1379 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1381 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1383 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1385 * d10v-opc.c: Add additional information to the opcode
1386 table to help determinine which instructions can be done
1389 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1391 * mpw-make.sed: Update editing of include pathnames to be
1394 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1396 * arm-opc.h: Added "bx" instruction definition.
1398 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1400 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1402 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1404 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1406 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1408 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1410 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1412 * makefile.vms: Update for alpha-opc changes.
1414 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1416 * i386-dis.c (print_insn_i386): Actually return the correct value.
1417 (ONE, OP_ONE): #ifdef out; not used.
1419 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1421 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1422 Changed subi operand type to treat 0 as 16.
1424 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1426 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1429 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1431 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1432 memory transfer instructions. Add new format string entries %h and %s.
1433 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1436 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1438 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1439 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1441 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1443 * alpha-dis.c (print_insn_alpha_osf): Remove.
1444 (print_insn_alpha_vms): Remove.
1445 (print_insn_alpha): Make globally visible. Chose the register
1446 names based on info->flavour.
1447 * disassemble.c: Always return print_insn_alpha for the alpha.
1449 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1451 * d10v-dis.c (dis_long): Handle unknown opcodes.
1453 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1455 * d10v-opc.c: Changes to support signed and unsigned numbers.
1456 All instructions with the same name that have long and short forms
1457 now end in ".l" or ".s". Divs added.
1458 * d10v-dis.c: Changes to support signed and unsigned numbers.
1460 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1462 * d10v-dis.c: Change all functions to use info->print_address_func.
1464 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1466 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1467 move ccr/sr insns more strict so that the disassembler only
1468 selects them when the addressing mode is data register.
1470 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1471 * d10v-opc.c (pre_defined_registers): Declare.
1472 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1473 to pick a better name for the registers.
1475 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1477 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1478 operands for fexpand and fpmerge. From Christian Kuehnke
1479 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1481 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1483 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1484 print routine. Take new regnames and cpumask arguments.
1485 Kill the environment variable nonsense.
1486 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1487 (print_insn_alpha_vms): New function. Do VMS style regnames.
1488 * disassemble.c (disassembler): Test bfd flavour to pick
1489 between OSF and VMS routines. Default to OSF.
1491 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1493 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1494 * configure: Rebuild.
1495 * Makefile.in (install): Use @INSTALL_SHLIB@.
1497 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1499 * configure: (bfd_d10v_arch) Add new case.
1500 * configure.in: (bfd_d10v_arch) Add new case.
1501 * d10v-dis.c: New file.
1502 * d10v-opc.c: New file.
1503 * disassemble.c (disassembler) Add entry for d10v.
1505 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1507 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1508 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1510 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1512 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1513 distinguish between variants of the instruction set.
1514 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1515 distinguish between variants of the instruction set.
1517 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1519 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1520 the 8086 instruction set.
1521 * i386-dis.c: General cleanups. Make most things static. Add
1522 prototypes. Get rid of static variables aflags and dflags. Pass
1523 them as args (to almost everything).
1525 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1527 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1529 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1531 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1532 if the next arg is marked with SRC_IN_DST. Gross.
1534 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1535 we're looking for and find EXR.
1537 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1538 if we're looking for KBIT and we don't find it.
1540 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1543 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1544 3bit immediate operands.
1546 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1548 * Released binutils 2.7.
1550 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1551 <kkaempf@progis.ac-net.de>.
1553 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1555 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1557 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1559 * sparc-dis.c (print_insn_sparclite): New routine to print
1560 sparclite instructions.
1562 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1564 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1566 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1568 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1569 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1570 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1572 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1574 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1575 Use autoconf-set values.
1576 (docdir, oldincludedir): Removed.
1577 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1579 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1581 * alpha-opc.c: New file.
1582 * alpha-opc.h: Remove.
1583 * alpha-dis.c: Complete rewrite to use new opcode table.
1584 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1585 * configure: Rebuild with autoconf 2.10.
1586 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1587 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1589 (alpha-opc.o): New target.
1591 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1593 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1594 Set imm_added_to_rs1 even if the source and destination register
1597 * sparc-opc.c: Add some two operand forms of the wr instruction.
1599 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1601 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1604 * disassemble.c (disassembler): Handle H8/S.
1605 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1607 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1609 * sparc-opc.c: Add beq/teq as aliases for be/te.
1611 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1612 <sergei@msil.sps.mot.com>.
1614 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1616 * makefile.vms: New file.
1618 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1620 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1622 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1625 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1627 * i386-dis.c (OP_OFF): Call append_prefix.
1629 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1631 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1632 unsigned long to silence a warning from the Solaris PowerPC
1635 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1637 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1639 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1641 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1643 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1644 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1645 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1646 cpush, cpusha, cpull sparclet insns.
1648 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1650 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1652 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1654 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1655 Set F_FLOAT on other floating point instructions.
1657 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1659 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1661 (powerpc_opcodes): Add 860/821 specific SPRs.
1663 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1665 * configure.in: Permit --enable-shared to specify a list of
1666 directories. Set and substitute BFD_PICLIST.
1667 * configure: Rebuild.
1668 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1669 uses. Set to @BFD_PICLIST@.
1671 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1673 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1674 not "abs", which may be needed for the absolute in something
1675 like btst #0,@10:8. Print L_3 immediates separately from other
1676 immediates. Change ABSMOV reference to ABS8MEM.
1678 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1680 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1681 (current_arch_mask): New static global.
1682 (compute_arch_mask): New static function.
1683 (print_insn_sparc): Delete sparc_v9_p. New static local
1684 current_mach. Resort opcode table if current_mach changes.
1685 Generalize "insn not supported" test.
1686 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1687 Delete test for v9/!v9.
1688 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1690 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1691 (brfcx): Renamed to FBRX.
1692 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1693 coprocessor mnemonics are not supported on the sparclet).
1694 (condf): Renamed to CONDF.
1695 (SLCBCC2): Delete F_ALIAS flag.
1697 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1699 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1700 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1702 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1704 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1705 that the shared library version number is set correctly.
1707 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1709 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1710 Miles Bader <miles@gnu.ai.mit.edu>.
1711 * configure: Rebuild.
1713 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1715 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1718 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1720 * configure: Rebuild with autoconf 2.8.
1722 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1724 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1725 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1727 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1729 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1730 since they appear as targets in Makefile.in.
1731 * configure: Rebuild.
1733 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1735 * mpw-make.sed: Edit out shared library support bits.
1737 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1739 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1740 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1741 (sparc_opcodes): Add sparclet insns.
1742 (sparclet_cpreg_table): New static local.
1743 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1744 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1746 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1748 * i386-dis.c (index16): New static variable.
1749 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1751 (OP_indirE): Return result of OP_E.
1752 (OP_E): Check for 16 bit addressing mode, and disassemble
1753 correctly. Optimised 32 bit case a little. Don't print
1754 "(base,index,scale)" when sib specifies only an offset.
1756 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1758 * configure.in: Set and substitute SHLIB_DEP.
1759 * configure: Rebuild.
1760 * Makefile.in (SHLIB_DEP): New variable.
1761 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1762 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1763 COMMON_SHLIB, add them to piclist with appropriate modifications.
1764 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1765 here: just use piclist.
1767 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1769 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1770 (print_insn_sparc): Rewrite v9/not-v9 tests.
1771 (compare_opcodes): Likewise.
1772 * sparc-opc.c (MASK_<ARCH>): Define.
1773 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1774 (sparclet,v6notv9): Define.
1775 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1776 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1778 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1780 * configure.in: Call AC_PROG_CC before configure.host.
1781 * configure: Rebuild.
1783 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1785 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1787 * i386-dis.c (onebyte_has_modrm): New static array.
1788 (twobyte_has_modrm): New static array.
1789 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1791 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1793 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1796 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1798 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1801 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1803 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1804 m68010up, not just m68020up | cpu32.
1806 * Makefile.in (SONAME): New variable.
1807 ($(SHLINK)): Make a link to the transformed name, as well.
1808 (stamp-tshlink): New target.
1809 (install): Skip stamp-tshlink during install.
1811 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1813 * configure.in: Call AC_ARG_PROGRAM.
1814 * configure: Rebuild.
1815 * Makefile.in (program_transform_name): New variable.
1816 (install): Transform library name before installing it.
1818 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1820 * i960-dis.c (mem): Add HX dcinva instruction.
1822 Support for building as a shared library, based on patches from
1823 Alan Modra <alan@spri.levels.unisa.edu.au>:
1824 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1825 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1826 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1827 * configure: Rebuild.
1828 * Makefile.in (ALLLIBS): New variable.
1829 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1830 (COMMON_SHLIB, SHLINK): New variables.
1831 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1832 (STAGESTUFF): Remove variable.
1833 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1834 (stamp-piclist, piclist): New targets.
1835 ($(SHLIB), $(SHLINK)): New targets.
1836 ($(OFILES)): Depend upon stamp-picdir.
1837 (disassemble.o): Build twice if PICFLAG is set.
1838 (MOSTLYCLEAN): Add pic/*.o.
1839 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1840 (distclean): Remove pic and stamp-picdir.
1841 (install): Install shared libraries.
1842 (stamp-picdir): New target.
1844 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1846 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1847 Print unknown instruction as "unknown", rather than in hex.
1849 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1851 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1853 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1855 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1857 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1859 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1860 when necessary. From Ulrich Drepper
1861 <drepper@myware.rz.uni-karlsruhe.de>.
1863 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1865 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1866 sparc_num_opcodes. Update architecture enum values.
1867 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1868 (sparc_opcode_lookup_arch): New function.
1869 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1870 (sparc_opcodes): Add v9a shutdown insn.
1872 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1874 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1875 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1877 (print_insn_sparc64): Deleted.
1878 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1881 * sparc-opc.c (architecture_pname): Add v9a.
1883 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1885 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1886 incorrectly defined as 0x16 when it should be 0x15.
1887 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1888 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1889 excb (exception barrier) which is defined in the Alpha
1890 Architecture Handbook version 2.
1891 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1892 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1893 disassembled as or, for example.
1895 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1897 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1898 (_print_insn_mips): Change i from int to unsigned int.
1900 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1902 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1903 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1905 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1907 * i386-dis.c: Added Pentium Pro instructions.
1909 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1911 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1914 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1916 * sh-opc.h (sh_nibble_type): Added REG_B.
1917 (sh_arg_type): Added A_REG_B.
1918 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1920 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1922 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1924 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1926 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1928 * Makefile.in (distclean): Remove stamp-h. From Ronald
1929 F. Guilmette <rfg@monkeys.com>.
1931 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1933 From David Mosberger-Tang <davidm@azstarnet.com>:
1934 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1937 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1939 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1940 (sh_table): Added many SH3 opcodes.
1941 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1943 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1945 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1946 (subco,subco.): Mark this PPC, not PPCCOM.
1948 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1950 * configure: Rebuild with autoconf 2.7.
1952 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1954 * configure: Rebuild with autoconf 2.6.
1956 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1958 * configure.in: Sort list of architectures. Accept but do nothing
1959 for alliant, convex, pyramid, romp, and tahoe.
1961 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1963 * a29k-dis.c (print_special): Change num to unsigned int.
1965 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1967 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1970 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1972 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1973 * configure: Rebuilt.
1975 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1977 * configure.in: Add case for bfd_i860_arch.
1978 * configure: Rebuild.
1980 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1982 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1983 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1984 (NEXTDOUBLE): Likewise.
1985 (print_insn_m68k): Don't match fmoveml if there is more than one
1986 register in the list.
1987 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1989 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1991 * m68k-opc.c: Use #W rather than #w.
1992 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1994 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1996 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1997 and likewise for all the dbxx opcodes.
1999 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2001 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2003 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2005 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2006 the VR4100 specific instructions to the mips_opcodes structure.
2008 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2010 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2011 ugly Metrowerks bug in CW6, is fixed in CW7.
2013 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2015 * ppc-opc.c (whole file): Add flags for common/any support.
2017 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2019 * Makefile.in (BISON): Remove macro.
2020 (FLAGS_TO_PASS): Remove BISON.
2022 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2024 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2026 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2027 instructions that take no args by looking at the match mask.
2028 (print_insn_arg): Always print "%" before register names.
2029 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2030 [case '_']: Don't print "@#" before address.
2031 [case 'J']: Use "%s" as format string, not register name.
2032 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2034 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2036 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2039 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2041 From David Mosberger-Tang <davidm@azstarnet.com>
2043 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2044 (alpha_insn_set): added definitions for VAX floating point
2045 instructions (Unix compilers don't generate these, but handcoded
2046 assembly might still use them).
2048 * alpha-dis.c (print_insn_alpha): added support for disassembling
2049 the miscellaneous instructions in the Alpha instruction set.
2051 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2053 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2054 no longer create sysdep.h, sed ppc-opc.c to work around a
2055 serious Metrowerks C bug.
2056 * mpw-make.in: Remove.
2057 * mpw-make.sed: New file, used by mpw-configure to edit
2058 Makefile.in into an MPW makefile.
2060 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2062 * Makefile.in (maintainer-clean): New synonym for realclean.
2064 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2066 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2067 which use '0', '1', and '2' instead. Specify the proper size for
2068 a pmove immediate operand. Correct the pmovefd patterns to be
2069 moves to a register, not from a register.
2070 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2072 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2074 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2075 %psr, %wim, %tbr as F_NOTV9.
2077 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2079 * Makefile.in (Makefile): Just rebuild Makefile when running
2081 (config.h, stamp-h): New targets.
2082 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2083 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2084 rebuilding config.h.
2085 * configure: Rebuild.
2087 * mips-opc.c: Change unaligned loads and stores with "t,A"
2088 operands to use "t,A(b)".
2090 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2092 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2094 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2096 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2097 until 3 instead of until 2.
2099 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2101 * Makefile.in (ALL_CFLAGS): Define.
2102 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2103 (MOSTLYCLEAN): Add config.log.
2104 (distclean): Don't remove config.log.
2105 * configure.in: Substitute HDEFINES.
2106 * configure: Rebuild.
2108 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2110 * sh-opc.h (sh_arg_type): Add F_FR0.
2111 (sh_table, case fmac): Add F_FR0 as first argument.
2113 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2115 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2117 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2119 * sparc-dis.c: Remove all references to NO_V9.
2121 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2123 * aclocal.m4: Just include ../bfd/aclocal.m4.
2124 * configure: Rebuild.
2126 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2128 * sparc-dis.c (X_DISP19): Define.
2129 (print_insn, case 'G'): Use it.
2130 (print_insn, case 'L'): Sign extend displacement.
2132 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2134 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2135 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2136 host_makefile_frag or frags.
2137 * aclocal.m4: New file.
2138 * configure: Rebuild.
2139 * Makefile.in (INSTALL): Set to @INSTALL@.
2140 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2141 (INSTALL_DATA): Set to @INSTALL_DATA@.
2143 (AR_FLAGS): Set to rc rather than qc.
2144 (CC): Define as @CC@.
2145 (CFLAGS): Set to @CFLAGS@.
2146 (@host_makefile_frag@): Remove.
2147 (config.status): Remove dependency upon @frags@.
2149 * configure.in: ../bfd/config.bfd now just sets shell variables.
2150 Use them rather than looking through target Makefile fragments.
2151 * configure: Rebuild.
2153 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2155 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2157 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2159 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2160 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2163 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2164 (lookup_{name,value}): New functions.
2165 (prefetch_table): New static local.
2166 (sparc_{encode,decode}_prefetch): New functions.
2167 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2169 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2171 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2174 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2176 * sh-dis.c: Correct comment on first line of file.
2178 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2180 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2182 * sparc-opc.c (asi, membar): New static locals.
2183 (sparc_{encode,decode}_{asi,membar}): New functions.
2184 (sparc_opcodes, membar insn): Fix.
2185 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2186 Support decoding of membar masks.
2189 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2191 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2193 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2195 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2196 and likewise for the other branches. Add bhs as an alias for bcc,
2197 and likewise for the size variants. Add dbhs as an alias for
2200 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2202 * sh-opc.h (FP sts instructions): Update to match reality.
2204 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2206 * m68k-dis.c: (fpcr_names): Add % before all register names.
2207 (reg_names): Likewise.
2208 (print_insn_arg): Don't explicitly print % before register names.
2209 Add % before register names in static array names. In case 'r',
2210 print data registers as `@(Dn)', not `Dn@'. When printing a
2211 memory address, don't print @# before it.
2212 (print_indexed): Change base_disp and outer_disp from int to
2213 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2214 syntax. Sign extend 8 byte displacement correctly.
2215 (print_base): Print using MIT syntax. Print zpc when appropriate.
2216 Change parameter disp from int to bfd_vma.
2218 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2221 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2223 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2224 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2225 * sh-opc.h (sh_arg_type): Add new operand types.
2226 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2228 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2230 * Makefile.in (distclean): Remove generated file config.h.
2232 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2234 * Makefile.in (distclean): Remove generated file config.h.
2236 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2238 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2240 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2242 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2243 rather than numopcodes. Use m68k_opcodes rather than removed
2244 opcode function. Don't check F_ALIAS.
2245 (print_insn_arg): Change first parameter to be const char *.
2246 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2247 (m68k-opc.o): New target.
2248 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2249 * configure: Rebuild.
2251 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2253 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2254 (opcode_bits, opcode_hash_table): New variables.
2255 (opcodes_initialized): Renamed from opcodes_sorted.
2256 (build_hash_table): New function.
2257 (is_delayed_branch): Use hash table.
2258 (print_insn): Renamed from print_insn_sparc, made static.
2259 Build and use hash table. If !sparc64, ignore sparc64 insns,
2260 and vice-versa if sparc64.
2261 (print_insn_sparc, print_insn_sparc64): New functions.
2262 (compare_opcodes): Move sparc64 opcodes to end.
2263 Print commutative insns with constant second.
2264 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2266 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2268 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2269 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2270 avoids printing a delay slot in a delay slot.
2271 * sh-opc.h (sh_table): Fully bracket last entry.
2273 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2275 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2277 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2279 * configure.in: Get host_makefile_frag from ${srcdir}.
2281 * configure.in: Autoconfiscated. Check for string[s].h. Create
2282 config.h from config.in. Don't set up sysdep.h link.
2283 * sysdep.h: New file.
2284 * configure, config.in: New files, generated from configure.in.
2285 * Makefile.in: Updated to be processed autoconf-style.
2286 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2287 (Makefile): Depend on config.status.
2288 (config.status): New rule.
2289 * configure.bat: Update Makefile substitutions.
2291 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2293 * mips-opc.c (L1): Define.
2294 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2295 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2298 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2300 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2301 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2302 have multiple add units but only a single logical unit.
2304 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2305 shifted by 18, without any insertion or extraction function.
2306 (insert_cr, extract_cr): Remove.
2309 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
2311 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
2314 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2316 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2319 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2321 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2322 * sh-opc.h: Add copyright.
2324 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2326 * Makefile.in (crunch-m68k): Delete extra target accidentally
2327 checked in a while ago.
2329 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2331 * sh-opc.h (sh_table): Add SH3 support.
2333 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2335 * sh-opc.h: Added bsrf and braf.
2337 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2339 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2340 bogus [ls]fm{ea,fd} patterns.
2342 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2343 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2344 initialize it from memory. Make function static.
2345 (print_insn_{big,little}_arm): New functions.
2346 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2347 the correct endianness.
2350 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
2352 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
2353 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
2356 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2358 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2361 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2363 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2364 17th, so that it builds again using GCC as the compiler.
2366 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2368 * mips-dis.c (print_insn_little_mips): Cast return value from
2369 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2370 expects an unsigned long, and that might be fewer words of
2371 argument storage (e.g., if bfd_vma is long long on a 32-bit
2373 (print_insn_big_mips): Likewise with bfd_getb32 value.
2374 (_print_insn_mips): Now static.
2376 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2378 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2379 gcc memory hog problem with initializer is fixed.
2382 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
2384 * arc-opc.c (NULL): Define.
2385 (arc_operands, insn fields u,s): Delete.
2386 (arc_operands, insn fields a,b,c): Mark as signed.
2387 (arc_opcodes): No longer const, links computed at run-time.
2388 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
2389 suffixes that affect the insn code.
2390 (arc_opcodes): Resort table to macros are first.
2391 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
2392 (arc_opcodes, st [b] entry): Likewise.
2393 (arc_opcodes, st [b,d] entry): Fix mask, value.
2394 (arc_reg_names): Add entries for r29, r30, r31, r60.
2395 (opcode_map, icode_map): New static globals.
2396 (arc_opcode_init_tables): Initialize them.
2397 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
2398 (insert_shimmoffset): Signal error if register present.
2400 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
2403 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2405 Merge in support for Mac MPW as a host.
2406 (Old change descriptions retained for informational value.)
2408 * mpw-config.in (archname): Compute from the config.
2409 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2411 * mpw-config.in (target_arch): Compute from canonical target.
2412 (m68k, mips, powerpc, sparc): Add architectures.
2413 * mpw-make.in (disassemble.c.o): Add.
2414 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2416 * mpw-config.in (BFD_MACHINES): Set to a default value.
2417 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2419 * mpw-make.in (CSEARCH): Add extra-include to search path.
2421 * mpw-config.in (varargs.h): Don't create.
2422 (sysdep.h): Create using forward-include.
2423 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2425 * mpw-config.in: New file, MPW version of configure.in.
2426 * mpw-make.in: New file, MPW version of Makefile.in.
2429 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
2431 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
2432 Call arc_get_opcode_mach to map bfd mach number to opcode value.
2433 (print_insn_*): Pass bfd mach number, not opcode version.
2434 * arc-opc.c (arc_get_opcode_mach): New function.
2437 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2439 * alpha-dis.c (print_insn_alpha): Put empty statement after
2442 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2444 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2445 (low_sign_extend): Likewise.
2446 (get_field): Delete unused function.
2447 (set_field, deposit_14, deposit_21): Likewise.
2449 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2451 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2454 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2456 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2458 * alpha-opc.h (OSF_ASMCODE): define
2459 print pal-code names as defined in App C of the
2460 Alpha Architecture Reference Manual
2462 * alpha-dis.c: cleaned up output
2463 print stylized code forms as defined in App A.4.3 of the
2464 Alpha Architecture Reference Manual
2466 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2468 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2470 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2473 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2475 * m68k-dis.c (opcode): New function. Returns address of opcode
2476 table entry given index, even if the opcode table was split to
2477 work around gcc bugs.
2478 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2480 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2481 (reg_names): Now const.
2482 (print_insn_arg): Arrays cacheFieldName and names now const.
2483 (print_indexed): Array scales now const.
2486 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2488 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2489 (print_insn_arc_{host,graphics,audio}): Likewise.
2490 (print_insn): Add prototype.
2491 (arc_get_disassembler): New arg `big_p'. Return little or big
2492 print fn accordingly.
2493 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2494 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2495 (arc_opval_supported): Likewise.
2496 * disassemble.c (disassembler): Pass big endian flag to
2497 arc_get_disassembler.
2500 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2502 * ppc-opc.c: Sort recently added instructions by minor opcode
2503 number within major opcode number.
2505 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2507 * hppa-dis.c: Include libhppa.h.
2509 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2511 * mips-opc.c: Change dli to use M_DLI, and add dla.
2513 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2515 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2518 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2520 * arc-dis.c (arc_get_disassembler): Change argument to int,
2521 one of bfd_mach_arc_xxx. All callers updated.
2524 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2526 * mips-opc.c: Add r4650 mul instruction.
2528 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2530 * mips-opc.c: Add uld and usd macros for unaligned double load and
2533 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2535 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2536 mfdcr, mtdcr, icbt, iccci.
2539 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2541 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2542 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2543 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2544 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2545 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2546 (insert_absaddr): New function.
2548 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2550 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2551 New argument `cpu', pass it to arc_opcode_init_tables.
2552 Document byte order dependencies. Ignore unsupported insns.
2553 (arc_get_disassembler): New function.
2554 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2555 print_insn_arc_audio): New functions.
2556 * arc-opc.c (MULTSHIFT operand): Delete.
2557 (UNSIGNED, SATURATION): New operands.
2558 (mac, mul, mul64, mulu64): New insns.
2559 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2560 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2561 (host,graphics,audio extended and auxiliary regs): Define.
2562 (ss, sc, mh, ml): New suffixes.
2563 (arc_opcode_supported, arc_opval_supported): New functions.
2564 (insert_multshift, extract_multshift): Deleted.
2565 * disassemble.c (disassembler, case bfd_arch_arc): Call
2566 arc_get_disassembler to get disassembler routine.
2569 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2571 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2572 signed char fields to shorts, more portable.
2574 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2576 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2577 char fields as signed chars, since they may have negative values.
2579 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2581 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2582 (mycroft@netbsd.org).
2584 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2586 From "Logg, Ed" <elogg@ea.com>:
2587 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2588 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2591 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2593 * ppc-opc.c: Changes based on patch from David Edelsohn
2594 <edelsohn@mhpcc.edu>.
2595 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2598 (insert_tbr): New static function.
2599 (extract_tbr): New static function.
2600 (XFXFXM_MASK, XFXM): Define.
2601 (XSPRBAT_MASK, XSPRG_MASK): Define.
2602 (powerpc_opcodes): Add instructions to access special registers by
2603 name. Add mtcr and mftbu.
2605 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2607 * mips-opc.c (P3): Define.
2608 (mips_opcodes): Add mad and madu.
2610 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2612 * configure.in: Add W65 support.
2613 * disassemble.c: Likewise.
2614 * w65-opc.h, w65-dis.c: New files.
2616 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2618 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2622 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2624 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2626 * arc-opc.c (extract_reladdr): New function.
2627 (insert_reladdr): Store address right-shifted by 2.
2630 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2632 * mips-opc.c: Add dli as a synonym for li.
2635 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2637 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2639 (extraction fns): Insn argument now array of two words. Return pointer
2640 to value's table entry. All uses changed.
2641 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2642 (insert_multshift, extract_multshift): New fns.
2643 (arc_operands): Add support for cache bypass suffix. Add support for
2644 predefined aux regs. Modifier bits moved to flags field.
2645 (arc_opcodes): Likewise.
2646 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2647 New insn rlc. Update to syntax in programmer's manual.
2648 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2649 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2651 (arc_opcode_init_tables): New argument to indicate cpu type.
2652 (insert_reg): Handle predefined aux regs.
2653 (extract_reg): Likewise.
2654 (lookup_register): New fn.
2655 * arc-dis.c (arc_condition_codes): Deleted.
2656 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2657 Clean up modifier handling. Handle predefined aux regs.
2660 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2662 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2663 print something for reserved opcode values, even if it won't
2666 * mips-dis.c (_print_insn_mips): When initializing, shift right
2667 and mask, to avoid sign extension problems on the Alpha.
2669 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2673 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2675 * configure.in: Add ARC support.
2676 * disassemble.c: Likewise.
2677 * arc-dis.c, arc-opc.c: New files.
2680 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2682 * sh-opc.h (mov.l gbr): Get direction right.
2683 * sh-dis.c (print_insn_shx): New function.
2684 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2685 print opcodes with right byte order.
2687 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2689 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2690 to avoid conflicts with getopt.
2692 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2694 * hppa-dis.c (print_insn_hppa): Read the instruction using
2695 bfd_getb32, so that it works on a little endian or 64 bit host.
2696 Remove unused local variable op.
2698 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2700 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2701 addu does not work correctly if -mips3.
2703 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2705 * a29k-dis.c (print_special): Add special register names defined
2706 on 29030, 29040 and 29050.
2707 (print_insn): Handle new operand type 'I'.
2709 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2711 * Makefile.in (INSTALL): Use top level install.sh script.
2713 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2715 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2716 that it works on a little endian host.
2718 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2720 * configure.in: Use ${config_shell} when running config.bfd.
2722 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2724 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2726 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2728 * a29k-dis.c (print_insn): Print the opcode.
2730 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2732 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2734 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2736 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2738 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2740 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2741 which store a value into memory.
2743 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2745 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2746 * arm-dis.c, arm-opc.h: New files.
2748 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2750 * Makefile.in (ns32k-dis.o): Add dependency.
2751 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2752 string, not as array of chars.
2754 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2756 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2758 * sparc-opc.c: Added sparclite extended FP operations, and
2759 versions of v9 impdep* instructions permitting specification of
2762 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2764 * i960-dis.c (reg_names): Now const.
2765 (struct sparse_tabent): New type, copied from array type in mem
2767 (ctrl): Local static array ctrl_tab now const.
2768 (cobr): Local static array cobr_tab now const.
2769 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2770 static variable mem_tab no longer explicitly initialized. Changed
2771 mem_init to const array of struct sparse_tabent.
2772 (reg): Local static variable reg_tab no longer explicitly
2773 initialized. Changed reg_init to const array of struct
2775 (ea): Local static array scale_tab now const.
2777 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2780 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2782 * configure.bat: the disassember needs to be enabled for
2783 "objdump -d" to work in djgpp.
2785 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2787 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2788 (invalid_float): Enabled general version, doesn't require running
2789 on ns32k host. Changed to take char* argument, and test for
2790 explicitly specified sizes, instead of using sizeof() on host CPU
2792 (INVALID_FLOAT): Cast first argument.
2793 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2794 list_P032, list_M032): Now const.
2795 (optlist, list_search): Made appropriate arguments now point to
2797 (print_insn_arg): Changed static array of one-character-string
2798 pointers into a static const array of characters; fixed sprintf
2799 statement accordingly.
2801 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2803 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2804 from distribution. A ns32k-dis.c from a previous distribution has
2805 been brought up to date and supports the new interface.
2807 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2809 * configure.in: add bfd_ns32k_arch target support.
2811 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2812 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2814 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2816 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2819 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2821 * h8300-dis.c, mips-dis.c: Don't use true and false.
2823 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2825 * configure.in: Change --with-targets to --enable-targets.
2827 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2829 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2830 opcodes to the first instruction with that opcode, to speed
2831 disassembly of large files. From ralphc@pyramid.com (Ralph
2834 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2836 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2838 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2840 * configure.bat: update to latest makefile.in
2842 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2844 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2845 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2846 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2847 slot insn is in a delay slot.
2848 * z8k-opc.h: (resflg): Fix patterns.
2849 * h8500-opc.h Fix CR insn patterns.
2851 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2853 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2854 "cmpl" before POWER versions, so that gas -many uses them.
2856 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2858 * disassemble.c: New file.
2859 * Makefile.in (OFILES): Add disassemble.o.
2860 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2861 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2862 binutils/configure.in.
2864 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2865 opcode being examined.
2867 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2869 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2870 (insert_ral, insert_ram, insert_ras): New functions.
2871 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2872 RAS for store with update.
2874 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2876 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2877 (edelsohn@npac.syr.edu).
2879 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2881 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2884 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2886 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2888 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2890 * ppc-opc.c (powerpc_operands): The signedp field has been
2891 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2892 instead. Add new operand SISIGNOPT.
2893 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2894 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2895 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2898 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2900 * i386-dis.c (struct private): Renamed to dis_private. `private'
2901 is a reserved word for dynix cc.
2903 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2905 * configure.in: Change error message to refer to bfd/config.bfd
2906 rather than bfd/configure.in.
2908 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2910 * ppc-opc.c: Define POWER2 as short alias flag.
2911 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2914 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2916 * i960-dis.c (print_insn_i960): Don't read a second word for
2917 opcodes 0, 1, 2 and 3.
2919 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2921 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2923 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2925 * m68881-ext.c: Removed; no longer used.
2926 * Makefile.in: Changed accordingly.
2928 * m68k-dis.c (ext_format_68881): Don't declare.
2929 (print_insn_m68k): If an instruction uses place 'i', it uses at
2930 least four fixed bytes.
2931 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2932 extended float, convert to double using floatformat_to_double, not
2933 ieee_extended_to_double, and fetch the data before converting it.
2935 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2937 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2938 davidj@ICSI.Berkeley.EDU (David Johnson).
2940 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2942 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2943 PowerPC uses bdnz[l][a].
2945 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2947 * dis-buf.c, i386-dis.c: Include sysdep.h.
2949 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2951 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2953 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2954 by Motorola PowerPC 601 with PPC_OPCODE_601.
2955 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2956 Disassemble Motorola PowerPC 601 instructions as well as normal
2957 PowerPC instructions.
2959 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2961 * i960-dis.c (reg, mem): Just use a static array instead of
2964 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2966 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2967 condition name index if this is for a negated condition.
2969 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2970 Floating point format for 'H' operand is backwards from normal
2971 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2972 operands (fmpyadd and fmpysub), handle bizarre register
2973 translation correctly for single precision format.
2975 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2976 or 'I' operands if the next format specifier is 'M' (fcmp
2977 condition completer).
2979 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2981 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2982 single number giving a bitmask for the MB and ME fields of an M
2983 form instruction. Change NB to accept 32, and turn it into 0;
2984 also turn 0 into 32 when disassembling. Seperated SH from NB.
2985 (insert_mbe, extract_mbe): New functions.
2986 (insert_nb, extract_nb): New functions.
2987 (SC_MASK): Mask out SA and LK bits.
2988 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2989 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2990 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2991 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2992 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2993 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2994 (powerpc_macros): Define table of macro definitions.
2995 (powerpc_num_macros): Define.
2997 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2998 if PPC_OPERAND_NEXT is set.
3000 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3002 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3003 char. Retrieve contents using bfd_getl32 instead of shifting.
3005 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3007 * ppc-opc.c: New file. Opcode table for PowerPC, including
3008 opcodes for POWER (RS/6000).
3009 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3010 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3011 (CFILES): Add ppc-dis.c.
3012 (ppc-dis.o, ppc-opc.o): New targets.
3013 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3015 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3017 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3018 No space before 'u', 'f', or 'N'.
3020 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3022 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3023 farther than we should.
3025 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3027 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3029 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3031 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3033 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3034 needs it, to prevent reading past the end of a section.
3036 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3038 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3039 Removed t,A case for la; always use t,A(b) case.
3041 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3043 From Ted Lemen <mellon@pepper.ncd.com>
3044 * mips-dis.c (print_insn_arg): Handle 'k'.
3045 * mips-opc.c: Make cache use k, not t.
3047 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3049 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3050 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3051 FLOAT_FORMAT_CODE to put out floating point register names.
3053 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3055 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3057 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3059 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3061 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3063 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3064 larger than 32. Moved dsxx32 variants first for disassembler.
3066 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3068 * z8kgen.c, z8k-opc.h: Add full lda information.
3070 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3072 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3073 movb instructions. Any necessary space will be emitted by
3074 the code to handle nullification completers.
3076 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3078 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3080 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3082 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3083 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3085 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3087 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3089 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3091 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3092 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3094 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3096 * m88k-dis.c (m88kdis): comment change. Remove space after
3098 (printop): handle new arg types DEC and XREG for m88110.
3100 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3102 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3103 type for absolute branch addresses. Delete special
3104 "ble" and "be" code in 'W' operand code.
3106 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3108 * mips-opc.c: Set hazard information correctly for branch
3109 likely instructions.
3111 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3113 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3114 info->fprintf_func for printing and info->print_address_func for
3117 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3119 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3121 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3123 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3124 Corrected second case of "b" for disassembler.
3126 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3128 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3129 to BFD swapping routines to correspond to BFD name changes.
3131 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3133 * mips-opc.c: Change div machine instruction to be z,s,t rather
3134 than s,t. Change div macro to be d,v,t rather than d,s,t.
3135 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3136 rem and remu which generates only the corresponding div
3137 instruction. This is for compatibility with the MIPS assembler,
3138 which only generates the simple machine instruction when an
3139 explicit destination of $0 is used.
3140 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3142 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3144 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3145 WR_31 hazard for bal, bgezal, bltzal.
3147 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3149 * hppa-dis.c (print_insn_hppa): Use print function
3150 from within the disassemble_info, not fprintf_filtered.
3152 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3154 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3155 Law, law@cs.utah.edu.)
3157 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3159 * mips-opc.c ("absu"): Removed.
3162 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3164 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3165 Changed hazard information to distinguish between memory load
3166 delays and coprocessor load delays.
3168 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3170 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3172 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3174 * configure.in: Don't pass cpu to config.bfd.
3176 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3178 * m88k-dis.c (m88kdis): Make class unsigned.
3180 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3182 * alpha-dis.c (print_insn_alpha): One branch format case was
3183 missing the instruction name.
3185 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3187 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3188 Add the arch-specific auxiliary files.
3189 (OFILES): Remove the arch-specific auxiliary files
3190 and use BFD_MACHINES instead of DIS_LIBS.
3191 * configure.in: Set BFD_MACHINES based on --with-targets option.
3193 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3195 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3198 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3200 * sparc-opc.c: Change CONST to const to deal with gcc
3201 -Dconst=__const -traditional.
3203 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3205 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3206 coprocessor instructions out of #if 0, and made them use new
3209 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3211 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3213 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3215 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3216 instruction, for use by the disassembler.
3218 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3219 hand-coded sign extensions that depended on 32-bit host ints.
3220 FIXME, we still depend on big-endian host bitfield ordering.
3221 (sparc_print_insn): Set the insn_info_valid field, and the
3222 other fields that describe the instruction being printed.
3224 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3226 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3227 `jmp' instead of just one of them.
3229 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3231 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3232 (fput_fp_reg_r): Renamed from fput_reg_r.
3233 (fput_fp_reg): New function.
3234 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3236 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3238 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3240 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3242 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3244 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3245 don't output a space.
3247 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3249 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3251 * mips-opc.c: New file, containing opcode table from
3252 ../include/opcode/mips.h.
3253 * Makefile.in: Add it.
3255 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3257 * m88k-dis.c: New file, moved in from gdb and changed to use the
3258 new dis-asm.h disassembler interface.
3259 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3260 (m88k-dis.o): New target.
3262 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3264 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3265 argument string const char * to correspond to opcode/mips.h.
3267 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3269 * mips-dis.c: Updated to account for name changes in new version
3271 * Makefile.in: Added header file dependencies.
3273 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3275 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3277 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3279 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3280 extend, rather than shifts.
3282 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3284 * Makefile.in: Undo 15 June change.
3286 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3288 * m68k-dis.c (print_insn_arg): Change return value to byte count
3290 * m68k-dis.c: Re-write to detect invalid operands before
3291 printing anything, so we can handle this the same way we
3292 handle invalid opcodes.
3294 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3296 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3298 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3300 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3303 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3305 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3307 * configure.in: Do make sysdep.h link.
3308 * Makefile.in: Search ../include. Don't search ../bfd.
3310 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3312 Changes from Jeff Law, law@cs.utah.edu:
3313 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3314 Do not print a space before the completers specified by
3317 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3319 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3320 defined, since gdb has been fixed.
3322 Changes from Jeff Law, law@cs.utah.edu:
3323 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3324 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3325 be a *disassemble_info, not a *FILE.
3326 * hppa-dis.c: Support 'd', '!', and 'a'.
3327 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3328 * hppa-dis.c: Delete cases which are no longer needed.
3330 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3332 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3334 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3336 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3339 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3341 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3342 * configure.in: No longer need to configure to get sysdep.h.
3344 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3346 * Patches from Jeffrey Law <law@cs.utah.edu>.
3347 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3348 templates for 1.1 FP computational instructions.
3350 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3352 * h8500-dis.c (print_insn_h8500): Address argument is type
3354 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3357 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3358 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3360 * sparc-dis.c (compare_opcodes): Move static declaration to
3363 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3365 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3366 instruction, remove unimp hack from 'l' argument.
3368 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3370 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3373 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3375 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3376 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3379 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3381 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3382 arrays of string pointers to 2-d arrays of chars, to save
3385 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3387 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3388 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3390 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3392 * hppa-dis.c: New file from Utah, adapted to new disassembler
3394 * Makefile.in: Include it.
3396 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3398 * sh-dis.c, sh-opc.h: New files.
3400 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3402 * alpha-dis.c, alpha-opc.h: New files.
3404 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3406 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3409 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3411 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3413 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3415 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3418 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3420 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3421 and double percent signs a few places.
3423 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3425 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3426 Use info->print_address_func not print_address.
3428 * dis-buf.c (generic_print_address): New function.
3430 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3432 * Makefile.in: Add sparc-dis.c.
3433 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3435 Add `add' instruction to the set that get checked
3436 for a preceding `sethi' in order to print an absolute address.
3437 * (print_insn): Disassembly prefers real instructions.
3438 (is_delayed_branch): Speed up.
3439 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3440 Still missing some float ops, and needs testing.
3441 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3442 F_ALIAS. Use printf, not fprintf, when not passing a file
3444 (compare_opcodes): Check that identical instructions have
3445 identical opcodes, complain otherwise.
3448 * Include reg_names.
3450 Use dis-asm.h/read_memory_func interface.
3452 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3454 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3455 deliberately return non-zero to setjmp from longjmp. Otherwise
3456 this code fails to compile.
3458 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3460 * m68k-dis.c: Fix prototype for fetch_arg().
3462 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3464 * dis-buf.c: New file, for new read_memory_func interface.
3465 Makefile.in (OFILES): Include it.
3466 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3467 Use new read_memory_func interface.
3469 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3471 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3472 * h8500-opc.h: Fix couple of opcodes.
3474 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3476 * Makefile.in: add dvi & installcheck targets
3478 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3480 * Makefile.in: Update for h8500-dis.c.
3482 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3484 * h8500-dis.c, h8500-opc.h: New files
3486 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3488 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3489 ../include/dis-asm.h.
3490 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3491 and ../gdb/m68k-pinsn.c).
3492 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3493 and ../gdb/i386-pinsn.c).
3494 * m68881-ext.c: New file. Moved definition of
3495 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3496 * Makefile.in: Adjust for new files.
3497 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3498 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3499 can be dis-assembled.
3501 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3503 * mips-dis.c (print_insn_arg): Now returns void.
3505 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3507 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3508 files that use the macros.
3510 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3512 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3513 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3514 (CFILES): Added mips-dis.c.
3516 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3518 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3519 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3521 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3523 * Makefile.in: Improve *clean rules.
3524 * configure.in: Allow a default host.
3526 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3528 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3529 files include other sysdep files
3531 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3533 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3535 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3537 * configure.in: For host support, use ../bfd/configure.host
3538 so it stays in sync with the ../bfd/hosts database.
3540 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3542 * configure.in: use cpu-vendor-os triple instead of nested cases
3544 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3546 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3547 *always* the wrong one.
3549 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3551 * z8kgen.c: added copyright info
3553 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3555 * z8k-dis.c (unparse_instr): prettier tabs
3556 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3558 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3560 * configure.in: Add ncr* configuration.
3561 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3562 picayune ANSI compilers happy.
3564 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3566 * configure.in (i386): Make i386 and i486 synonymous for now.
3567 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3569 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3571 * Makefile.in (install): Fix typo.
3573 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3575 * Makefile.in (make): Remove obsolete crud.
3576 (sparc-opc.o): Avoid Sun Make VPATH bug.
3578 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3580 * Makefile.in: since there are no SUBDIRS, remove rule and
3581 references of subdir_do.
3583 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3585 * Makefile.in (install): Get the library name right here too.
3586 Don't install bfd.h, since it's unrelated to this library. No
3587 subdirs to recurse into, either.
3588 (CFILES): The source file has a .c suffix, not .o.
3590 * sparc-opc.c: New file, moved from BFD.
3591 * Makefile.in (OFILES): Build it.
3593 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3595 * z8k-dis.c: fixed forward refferences of some declarations.
3597 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3599 * Makefile.in: get the name of the library right
3601 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3603 * z8k-dis.c: knows how to disassemble z8k stuff
3604 * z8k-opc.h: new file full of z8000 opcodes
3608 version-control: never
projects / deliverable / binutils-gdb.git / blob