1 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
3 * configure.in): Added case for bfd_fr30_arch.
4 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
5 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
6 (CLEANFILES): Added stamp-fr30.
8 * fr30-asm.c: New file.
9 * fr30-dis.c: New file.
10 * fr30-opc.c: New file.
11 * fr30-opc.h: New file.
13 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
15 * configure.in: detect cygwin* instead of cygwin32*
16 * configure: regenerate
18 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
20 * mips-opc.c (IS_M): Added.
23 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
25 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
29 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
32 * cgen-asm.in (insert_1): New function.
33 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
34 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
35 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
36 * cgen-dis.in (extract_1): New function.
37 (extract_normal): buf_ctrl renamed to ex_info, update type.
38 Progress on handling of CGEN_INT_INSN_P.
39 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
40 Update handling of CGEN_INT_INSN_P. Handle errors from
41 @arch@_cgen_extract_operand.
42 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
43 (default_print_insn): Renamed from print_insn.
44 Handle ! CGEN_INT_INSN_P.
45 (print_insn_@arch@): Handle error returns from print_insn.
46 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
47 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
48 (@arch@_cgen_lookup_get_insn_operands): Ditto.
50 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
53 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
55 * m10300-opc.c: Allow autoincrement stores using the same register
56 for source and destination operands.
58 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
60 * m10300-opc.c: DSP instrutions which only write to one general
61 register have no restrictions on matching operands.
63 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
66 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
68 * m32r-opc.h,m32r-opc.c: Regenerate.
71 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
73 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
76 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
78 * i386-dis.c (OP_3DNowSuffix): New static function.
81 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
82 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
83 (insn_codep): New static variable.
84 (print_insn_x86): Init insn_codep after prefixes.
85 (grps): Add GRP14 entries for prefetch, prefetchw.
88 From Jeff B Epler <jepler@usgs.gov>
89 * i386-dis.c (Suffix3DNow): New table.
91 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
93 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
95 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
97 * d10v-dis.c (print_operand): If num is nonzero, then
98 add OPERAND_ACC1, not OPERAND_ACC0.
100 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
102 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
105 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
107 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
111 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
113 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
116 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
118 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
120 start-sanitize-nortel-ppc750
121 1998-09-09 Michael Meissner <meissner@cygnus.com>
123 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
126 end-sanitize-nortel-ppc750
127 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
129 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
131 (print_insn_little_arm): Detect Thumb symbols in elf object
134 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
136 * alpha-dis.c (print_insn_alpha): Use the machine type to
137 decide which PALcode set to include.
139 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
141 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
143 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
145 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
146 MSUB and MSUBS instructions.
149 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
151 * mips-opc.c: Insert contents of vu0.h, rather than including it.
153 * Makefile.am: Rebuild dependencies.
157 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
159 * ppc-opc.c (powerpc_operands): Omit parens around additions in
162 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
164 start-sanitize-coldfire
165 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
166 ColdFire, as below for mulsl and mulul.
168 end-sanitize-coldfire
169 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
170 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
171 +, -, and d for ColdFire.
173 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
174 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
175 (extract_mbe): Likewise.
177 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
179 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
181 * m10300-opc.c: First cut at UDF instructions.
183 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
185 * m32r-opc.c: Regenerate (remove semantic descriptions).
187 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
189 * arm-dis.c (print_insn_big_arm): Fix indentation.
190 (print_insn_little_arm): Likewise.
192 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
194 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
196 (print_insn_little_arm): Likewise.
198 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
200 Move all global state data into opcode table struct, and treat
201 opcode table as something that is "opened/closed".
202 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
203 (cgen_asm_init): Delete.
204 (cgen_set_parse_operand_fn): New function.
205 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
206 (cgen_dis_init): Delete.
207 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
208 (cgen_current_{opcode_table_mach,endian}): Delete.
209 start-sanitize-cygnus
210 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
211 * cgen-dis.in (all fns): Ditto.
212 * cgen-opc.in (all fns): Ditto.
214 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
216 start-sanitize-cygnus
217 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
219 * cgen-dis.in (print_normal): Split into two.
220 (print_address): New function.
221 (extract_insn_normal): Clarify insn_value arg.
222 (print_int_insn): Renamed from print_insn.
223 (print_insn): New arg.
224 (print_insn_@arch@): Open opcode table if not already done so.
225 Move reading of insn into print_insn.
228 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
230 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
234 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
236 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
237 accept an accumulator choice.
238 * m32r-opc.c,m32r-opc.h: Regenerate.
241 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
243 * m10300-opc.c: Add entries for "no_match_operands" field in
247 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
249 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
253 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
255 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
258 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
260 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
262 * m10300-opc.c: Add autoincrement memory loads/stores.
266 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
268 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
269 phmsubh respectively.
272 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
274 start-sanitize-cygnus
275 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
277 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
278 @arch_cgen_get_int_operand.
279 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
280 Update call to @arch@_cgen_insert_operand.
281 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
282 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
283 (extract_insn_normal): New arg `pc', callers updated.
284 Update call to @arch@_cgen_extract_operand.
285 (print_insn): Update call to CGEN_EXTRACT_FN.
287 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
290 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
292 * m10300-opc.c: Fix load to sp and store from sp for the am33.
293 Add more multimedia instructions.
295 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
297 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
302 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
304 * mips-opc.c (pref): Enabled for the r5900.
307 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
309 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
311 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
313 (OP_J): Remove unnecessary subtraction when 16-bit displacement
314 will be masked later.
317 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
319 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
322 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
324 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
325 from raw register #s to symbolic names to make debugging easier.
328 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
330 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
332 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
334 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
335 start-sanitize-cygnus
336 * Makefile.am (CGENDIR): Set via configure.
337 (CGEN): New variable.
338 (CGENFILES): object.scm renamed to cos.scm.
339 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
340 (stamp-m32r): Pass prefix to run-cgen.
341 * Makefile.in: Regenerate.
342 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
343 * cgen-dis.in: Ditto.
344 * cgen-opc.in: Ditto.
345 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
346 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
347 * configure: Regenerate.
351 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
353 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
355 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
357 * m10300-opc.c: Reorder more instructions so that we do not
358 accidentally match a mn10300 instruction when we really
359 wanted an am33 instruction.
362 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
364 * m10300-dis.c: Only recognize instructions from the currently
366 * m10300-opc.c: Add field indicating the particular variant of
367 the mn10300 each instruction is available on.
369 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
371 * configure.in: For bfd_vax_arch, build vax-dis.lo.
372 * Makefile.am: Rebuild dependencies.
373 (CFILES): Add vax-dis.c.
374 (ALL_MACHINES): Add vax-dis.lo.
375 * aclocal.m4: Rebuild with current libtool.
376 * configure, Makefile.in: Rebuild.
378 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
380 * vax-dis.c: New file, from work by Pauline Middelink
381 <middelin@polyware.iaf.nl>.
382 * disassemble.c (ARCH_vax): Define if ARCH_all.
383 (disassembler): Add case for ARCH_vax.
384 * makefile.vms: Support compilation on vms/vax.
387 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
389 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
390 the DVP_OPERAND_RELOC_11_S4 relocation.
394 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
396 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
398 (disassemble): Correctly handle FMT_D10 instructions.
400 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
401 am33 shift instructions.
403 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
405 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
406 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
408 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
409 (mn10300_opcodes): Reorder so as to try and select opcodes from
410 the core chip when multiple alternatives exist. Change several
411 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
412 "macbu" instructions. Fix typos in a couple DSP instructions too.
415 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
417 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
418 related to sign extension and the size of ints.
420 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
422 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
423 instructions. Support (sp) addressing mode by expanding it into
427 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
429 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
430 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
431 be used as immediate values.
435 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
437 * m10300-opc.c: Support 4 byte DSP instructions.
440 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
442 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
445 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
447 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
450 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
452 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
455 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
457 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
458 found on the mn10300.
461 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
463 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
466 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
468 * mips-dis.c (print_insn_little_mips): Previously, instruction
469 printing references the symbol table to determine whether the
470 instruction resides in a block regular instructions or mips16
471 instructions. However, when the disassembler gets used in other
472 environments where the symbol table is not present, we no longer
473 rely in the symbol table, rather, use the low bit of the
474 instructions address to guess. There should be no change for usage
475 of the disassembler in host based programse, gdb ,objdump.
476 (print_insn_big_mips): ditto.
477 (print_insn_mips): ditto
479 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
481 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
483 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
486 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
487 operands for the am33.
488 (mn10300_opcodes): Add new instructions from the am33.
490 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
492 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
494 * i386-dis.c (index16): Add '%' to register names. Use ','
497 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
499 * i386-dis.c: Don't print opcode suffix when we can figure out the
500 size (and gas can!) by register operands, or from the default
502 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
504 (dis386, dis386_twobyte, grps): Use new suffix macros.
505 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
506 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
507 order of cmps operands to agree with Intel docs. Correct operand
508 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
509 agree with Intel docs.
510 (print_insn_x86): Print orphan fwait before other prefixes.
511 Return correct byte count for orphan fwait with prefixes. Don't
512 print `bound' operands in reverse order.
513 (ckprefix): Stop accumulating prefixes if we get fwait.
514 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
516 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
518 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
519 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
521 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
523 Fix problems when bfd_vma is wider than long.
524 * i386-dis.c: Make op_address and start_pc unsigned.
525 (set_op): Make parameter unsigned.
526 (print_insn_x86): Cast to bfd_vma when passing a value to
528 * ns32k-dis.c (CORE_ADDR): Don't define.
529 (print_insn_ns32k): Change type of addr to bfd_vma. Use
530 bfd_scan_vma to read back address.
531 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
533 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
534 (NEXTULONG): New definition.
535 (print_insn_m68k): Avoid overflow when computing third argument of
537 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
538 Use disp instead of val to store offset values.
539 (print_indexed): Use base_disp instead of word to store base
540 displacement, to avoid overflow.
541 * m10300-dis.c (disassemble): Cast value to long when computing
542 pc-relative address, to get correct sign extension.
544 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
546 * m32r-opc.c: Regenerate.
548 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
550 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
551 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
553 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
555 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
557 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
559 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
561 (OP_DSreg): Rename from OP_DSSI.
562 (OP_ESreg): Rename from OP_ESDI.
563 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
565 (append_seg): Rename from append_prefix.
566 (ptr_reg): New function.
567 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
569 (PREFIX_ADDR): Rename from PREFIX_ADR.
570 (float_reg): Add non-broken opcodes for people who don't want
573 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
575 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
578 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
580 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
582 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
584 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
585 0; produce error message for shifts of size 32 (or 64 for 64-bit
586 shifts), because the hardware doesn't support them.
589 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
591 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
594 * vu0.h (sqc2): Fix opcode.
596 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
600 start-sanitize-cygnus
601 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
603 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
604 Change pinfo to use WR_HILO.
607 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
609 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
610 LONG_2, LONG_2b formats to use this new operand.
612 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
614 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
616 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
618 * sparc-dis.c (print_insn_sparc): big endian instruction / little
621 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
623 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
624 and SHORT_B3b formats to use Rb instead of Ra.
626 Add FLAG_MUL16 to MUL2XH opcode.
628 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
629 to existing 1.1.1 parallelisation prohibition procedure.
631 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
633 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
634 * cgen-dis.in (extract_normal): Likewise.
635 * m32r-asm.c,m32r-dis.c: Regenerate.
638 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
640 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
644 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
646 * mips-opc.c (multu1): Add two operand variant for the r5900.
649 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
651 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
652 with a shift count of 0.
655 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
657 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
659 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
661 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
662 (_print_insn_mips): Likewise.
663 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
667 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
669 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
670 (cgen_hw_lookup_by_num): New function.
673 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
676 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
678 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
680 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
682 * sparc-dis.c (print_insn_sparc): Always fetch instructions
683 as big-endian on SPARClite.
686 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
688 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
690 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
694 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
696 * d30v-opc.c (pre_defined_register): Remove alias for r0.
699 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
701 * mips-opc.c (break): Added 20-bit single-operand break
702 instruction for R5900 only.
705 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
707 * po/Make-in (install-info): New target.
709 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
711 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
712 * configure: Rebuild.
714 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
716 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
717 variety of ISA2 instructions to set bottom ten bits of trap code.
719 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
721 * Makefile.am (config.status): Add explicit target so that
722 config.status depends upon bfd/configure.in.
723 * Makefile.in: Rebuild.
725 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
727 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
728 instructions to set bottom ten bits of break code.
729 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
730 for above optional argument.
732 start-sanitize-cygnus
733 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
735 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
736 * m32r-opc.h: Regenerate.
739 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
741 * makefile.vms: Run dec c with /nodebug.
743 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
745 * Makefile.in: Rebuilt.
746 * Makefile.am: Regenerated dependencies with mkdep.
748 * opintl.h (_): Define as dgettext.
750 start-sanitize-cygnus
751 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
753 * configure.in: Add support for --enable-cgen-maint.
754 * Makefile.am (M32R_DEPS): New variable.
755 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
756 * aclocal.m4: Regenerate.
757 * Makefile.in: Regenerate.
758 * configure: Regenerate.
760 * Makefile.am (CGENFILES): Add minsn.scm.
763 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
765 * cgen-asm.c: Internationalised.
766 start-sanitize-cygnus
767 * cgen-asm.in: Internationalised.
768 * cgen-opc.in: Internationalised.
770 * m32r-asm.c: Internationalised.
771 * m32r-dis.c: Internationalised.
772 * m32r-opc.c: Internationalised.
774 * aclocal.m4: Regenerated.
775 * configure: Regenerated.
776 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
777 * Makefile.in: Rebuild.
778 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
779 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
781 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
783 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
785 * aclocal.m4, configure: Rebuild with current tools.
787 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
789 * opintl.h: New file - contains internationalisation macros used
790 by source files in this directory.
791 * po/: New subdirectory - contains internationalisation files.
792 * po/Make-in: New file - Makefile constructor.
793 * po/POTFILES.in: New file - list of files in opcodes directory
794 that should be scan for internationalisation macros.
795 * po/opcodes.pot: New file - list of internationisation strings
796 found in files mentioned in po/POTFILES.in.
797 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
798 entry. Add intl directory to include paths.
799 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
800 HAVE_STRCPY, HAVE_LC_MESSAGES
801 * configure.in: Add rule to build Makefile in po subdirectory.
802 * Makefile.in: Rebuilt.
803 * aclocal.m4: Rebuilt.
804 * config.in: Rebuilt.
805 * configure: Rebuilt.
806 * alpha-opc.c: Internationalised.
807 * arc-dis.c: Internationalised.
808 * arc-opc.c: Internationalised.
809 * arm-dis.c: Internationalised.
810 * cgen-asm.c: Internationalised.
811 * d30v-dis.c: Internationalised.
812 * dis-buf.c: Internationalised.
814 * dvp-dis.c: Internationalised.
815 * dvp-opc.c: Internationalised.
817 * h8300-dis.c: Internationalised.
818 * h8500-dis.c: Internationalised.
819 * i386-dis.c: Internationalised.
820 * m10200-dis.c: Internationalised.
821 * m10300-dis.c: Internationalised.
822 * m68k-dis.c: Internationalised.
823 * m88k-dis.c: Internationalised.
824 * mips-dis.c: Internationalised.
825 * ns32k-dis.c: Internationalised.
826 * opintl.h: Internationalised.
827 * ppc-opc.c: Internationalised.
828 * sparc-dis.c: Internationalised.
829 * v850-dis.c: Internationalised.
830 * v850-opc.c: Internationalised.
832 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
834 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
835 (asm_hash_table_entries): New variable.
836 (cgen_asm_init): Free asm_hash_table_entries.
837 (hash_insn_array,hash_insn_list): New functions.
838 (build_asm_hash_table): Use them. Hash macro insns as well.
839 (cgen_asm_lookup_insn): Update.
840 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
841 (dis_hash_table_entries): New variable.
842 (cgen_dis_init): Free dis_hash_table_entries.
843 (hash_insn_array,hash_insn_list): New functions.
844 (build_dis_hash_table): Use them. Hash macro insns as well.
845 (cgen_dis_lookup_insn): Update.
846 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
847 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
848 (cgen_macro_insn_count): New function.
849 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
850 All callers updated. Sanity check result of extract fn.
851 (@arch@_cgen_get_insn_operands): Change result type to void.
852 Delete args insn_value, length. New arg fields. All callers updated.
853 (@arch@_cgen_lookup_get_insn_operands): New function.
854 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
856 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
858 * i386-dis.c (OP_DSSI): Print segment override.
861 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
863 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
867 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
869 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
873 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
875 * vu0.h (vlqd, vlqi): Update per revised specs.
879 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
881 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
882 (vif_operands): Update.
883 (vif_get_unpackloc): Delete.
884 (state_vif_unpackloc{,_star_p}): Delete.
885 (dvp_opcode_init_parse): Update.
886 (vif_unpack_len_value): Avoid divide by zero.
890 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
892 * vu0.h: Specs changed for VCALLMSR bit pattern.
893 * mips-dis.c: (print_insn_arg) Matching change.
896 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
898 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
901 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
903 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
904 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
905 * configure.in: Define and substitute WIN32LDFLAGS and
907 * aclocal.m4: Rebuild with new libtool.
908 * configure, Makefile.in: Rebuild.
911 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
913 * vu0.h: Corrected bit pattern for VMAXI opcode.
916 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
918 * m32r-opc.c: Regenerate.
921 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
923 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
924 (dvp_expand_macro): Implement.
925 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
926 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
929 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
931 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
932 before trying to copy it.
933 * Makefile.in: Rebuild.
935 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
937 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
940 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
942 * m32r-opc.c: Fix bit patterns for SAT and SATB.
945 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
947 * ns32k-dis.c (bit_extract_simple): New function to extract bits
948 from an arbitrary valid buffer instead of fetching them on demand
950 (invalid_float): use bit_extract_simple() instead of bit_extract().
953 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
955 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
956 * m32r-opc.h: Add extra control registers.
959 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
961 From H.J. Lu <hjl@gnu.org>:
962 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
965 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
967 * Branched binutils 2.9.
969 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
971 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
972 disassembling last 4 bytes of a section.
974 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
976 Fix some gcc -Wall warnings:
977 * arc-dis.c (print_insn): Add casts to avoid warnings.
978 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
979 * d10v-dis.c (dis_long, dis_2_short): Likewise.
981 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
982 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
983 (parse_bc, parse_vfreg, parse_accdest): Likewise.
984 (parse_ffstreg, parse_vif_mode): Likewise.
986 * m10200-dis.c (disassemble): Likewise.
987 * m10300-dis.c (disassemble): Likewise.
988 * ns32k-dis.c (print_insn_ns32k): Likewise.
989 * ppc-opc.c (insert_ral, insert_ram): Likewise.
990 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
991 * cgen-opc.c (cgen_keyword_search_next): Likewise.
992 * d10v-dis.c (dis_long, dis_2_short): Likewise.
993 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
995 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
996 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
997 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
999 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1000 start-sanitize-tic80
1001 * tic80-dis.c (print_one_instruction): Likewise.
1003 * w65-dis.c (print_operand): Likewise.
1004 * z8k-dis.c (fetch_data): Likewise.
1005 * a29k-dis.c: Add return type for find_byte_func_type.
1006 * arc-opc.c: Include <stdio.h>. Remove declarations of
1007 insert_multshift and extract_multshift.
1008 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1010 (extract_value): Fully parenthesize expression.
1012 * dvp-opc.c: Include <ctype.h>.
1013 (print_sdest): Add default case to switch.
1015 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1016 * h8500-opc.h (h8500_table): Fully bracket initializer.
1017 * w65-opc.h (optable): Likewise.
1018 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1019 * i386-dis.c (OP_E): Initialize local variables.
1020 * m10200-dis.c (print_insn_mn10200): Likewise.
1021 * mips-dis.c (print_insn_mips16): Likewise.
1022 * sh-dis.c (print_insn_shx): Likewise.
1023 * v850-dis.c (print_insn_v850): Likewise.
1024 * ns32k-dis.c (print_insn_arg): Declare.
1025 (get_displacement, invalid_float): Declare.
1026 (list_search, sign_extend, flip_bytes): Declare return type.
1027 (get_displacement): Likewise.
1028 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1030 (print_insn_ns32k): Make i unsigned.
1031 (invalid_float): Make static. Declare type of val.
1032 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1033 on each for iteration.
1034 * tic30-dis.c (get_indirect_operand): Likewise.
1035 * z8k-dis.c (print_insn_z8001): Declare return type.
1036 (print_insn_z8002): Likewise.
1037 (unparse_instr): Fix sprintf format strings.
1039 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1041 * mips-opc.c: Add "sync.l" and "sync.p".
1044 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1046 * dvp-opc.c (extract_vif_datalen): Rewrite.
1047 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1049 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1051 * dvp-dis.c (print_insn): Print unpack address in hex.
1052 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1053 Don't skip over '*', just record it.
1054 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1055 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1056 Don't skip over '*', just record it.
1057 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1058 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1059 (vif_opcodes): Likewise.
1060 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1061 (vif_macros,vif_macro_count): New globals.
1062 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1063 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1064 (vif_get_wl_cl): New function.
1065 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1068 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1070 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1071 default m68k variant to recognize.
1073 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1074 (ctrl, cobr, mem, ea): Likewise.
1075 (print_addr): Likewise. Remove cast.
1076 (ea): Cast argument of print_addr to bfd_vma.
1078 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1080 (cgen_parse_unsigned_integer): Likewise.
1081 (cgen_parse_address): Likewise.
1083 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1085 * i960-dis.c (ctrl): Add full braces to structure initialization.
1086 (cobr, mem, reg): Likewise.
1087 (ea): Correct parenthesization in expression.
1089 * cgen-asm.c: Include <ctype.h>.
1090 (build_asm_hash_table): Remove unused local variable i.
1091 (cgen_parse_keyword): Add casts to avoid warnings.
1093 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1094 symbol. Fix indentation.
1095 (print_insn_little_arm): Likewise.
1097 start-sanitize-r5900
1098 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1100 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1104 start-sanitize-m32rx
1105 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1107 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1112 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1114 * dvp-opc.c (vif_operand_datalen_special): New global.
1117 start-sanitize-r5900
1118 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1120 * vu0.h (vcallms): Use 'O' for call target operand.
1121 * mips-dis.c (print_insn_arg): Handle 'O'.
1124 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1126 * configure.in: Use AM_DISABLE_SHARED.
1127 * aclocal.m4, configure: Rebuild with libtool 1.2.
1129 start-sanitize-r5900
1130 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1132 * mips-dis.c: Change '%' to '#' in r5900 support.
1136 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1138 These patches are courtesy of Jonathan Walton and Tony Thompson
1139 (athompso@cambridge.arm.com).
1141 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1144 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1145 both the offset and the label closest to the destination.
1147 start-sanitize-r5900
1148 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1150 * vu0.h: New file with cop2/vu0 instructions.
1151 * mips-opc.c: Include vu0.h.
1152 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1154 (print_insn_mips): Do not emit a tab after an instruction if the
1155 first arg is an instruction completer (&). If the next arg is an
1156 escape character (%), then print the next arg verbatim.
1157 * Makefile.am (mips-opc.lo): Depend on vu0.h
1161 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1163 * dvp-opc.c (vif_opcodes): Add stcycl.
1165 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1167 * dvp-dis.c (print_dma): Change length from 16 to 8.
1170 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1172 * m32r-opc.h: Regenerate.
1175 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1177 * dvp-opc.c (print_dest1): Print dest spec again.
1178 (print_vfreg,print_accdest): Likewise.
1179 (vif_unpack_len): Round result up to word boundary.
1182 start-sanitize-vr4320
1183 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1185 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1187 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1189 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1194 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1196 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1197 (print_insn): Do mask comparison on proper opcode word.
1198 Print unsigned values in hex.
1199 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1200 (parse_bc): Catch missing dest.
1201 (parse_vfreg): Replace atoi call with strtol.
1202 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1203 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1204 (extract_gif_eop): New function.
1205 (gif_operands): Update eop entry.
1206 (VGIFOP,VGIFNREGS): Fix calcs.
1207 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1208 (gif_regs): Add entry for unused 11 case.
1209 (print_gif_regs): Print empty list instead of nothing.
1210 (extract_gif_nloop): Fix value calc.
1211 (print_gif_nloop): Always print value, even if 0.
1212 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1213 (vif_operands): Use them for wl,cl fields.
1214 (state_vif_wl,state_vif_cl): New static locals.
1215 (parse_vif_mode): Handle numeric args.
1216 (vif_unpack_len_value,vif_unpack_len): New functions.
1217 (vif_insn_len): Call vif_unpack_len.
1220 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1222 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1224 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1226 * cgen-asm.in: Move insertion of generated routines to top of file.
1227 (insert_normal): Add prototype. Delete `shift' arg.
1228 * cgen-dis.in: Move insertion of generated routines to top of file.
1229 (extract_normal): Add prototype. Delete `shift' arg.
1230 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1231 (print_keyword): Add prototype. Fix type of `attrs' arg.
1233 start-sanitize-vr4320
1234 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1236 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1237 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1240 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1242 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1243 assume that info->symbols is non-empty.
1245 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1247 * alpha-opc.c (cvtqs) There is no such thing.
1248 (cvttq): Missing most of the /*d variants.
1250 start-sanitize-r5900
1251 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1253 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1255 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1256 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1259 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1261 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1262 delayed branches or jumps.
1265 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1267 * dvp-opc.c (vif_operands): Add unpack[u] support.
1268 (vif_opcodes): Ditto.
1269 (*_vif_imrubits): Renamed from *_vif_imrbits.
1271 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1273 * dvp-dis.c (print_insn): Handle word number.
1274 Handle mips address vs vu address.
1275 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1276 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1277 ({insert,extract}_dma_addr): Fix word ofset.
1278 ({insert,print}_gif_regs): Fix encode/decode.
1281 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1283 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1285 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1286 * tic30-dis.c (print_branch): Likewise.
1288 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1289 * dvp-dis.c (dvp_info_mach_type): New function.
1290 (print_insn_dvp): Call it.
1291 (print_vif): Return length of 4 if mpg or direct insn so following
1292 insns get properly disabled.
1293 (print_gif): Fix word order.
1294 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1295 (gif_operands): Fix word order.
1296 (gif_opcodes): Likewise.
1297 ({insert,extract,print}_gif_regs): Likewise.
1298 (gif_regs): Add new register number/name changes.
1299 (dma_opcodes): Add dmarefe insn.
1302 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1304 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1305 saved_symbol code as it is no longer needed.
1307 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1309 * cgen-asm.c: Include symcat.h.
1310 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1312 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1315 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1317 * dvp-opc.c (extra_dma_flags): Fix typos.
1318 (dma_operands): Fix word numbers.
1319 (dma_opcodes): Likewise.
1320 ({insert,extract}_dma_flags): Likewise.
1323 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1325 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1328 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1330 * dvp-dis.c (print_gif): Complete.
1331 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1332 (state_gif_{nregs,regs,nloop}): New static locals.
1333 (*_gif_*): Complete.
1334 (dvp_opcode_init_{parse,print}): Init gif state locals.
1335 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1336 (vif_insn_len): Handle `unpack'.
1337 ({insert,extract}_dma_flags): Complete.
1340 start-sanitize-r5900
1341 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1343 * mips-opc.c (mula.s): Renamed from multa.s.
1346 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1348 * m32r-opc.[ch]: Regenerate.
1351 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1353 * dvp-opc.c (dma_operands): Rewrite.
1354 (dma_operand_{count,addr}): New globals.
1355 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1356 (insert_dma_addr): Insert value into insn.
1357 (extract_dma_addr): Extract value from insn.
1359 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1361 * dvp-dis.c (print_vu): Handle loi insns.
1362 (print_insn): Likewise.
1363 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1364 (vu_operands): Make LDEST1 a FAKE operand.
1365 (parse_dest1): Allow elided argument.
1366 (print_dest1): Don't print the argument.
1368 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1370 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1371 (print_vfreg): Don't print dest spec.
1372 (parse_accdest): Dest spec is optional.
1373 (print_accdest): Don't print dest spec.
1376 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1378 * Makefile.am (CGENFILES): Update.
1379 * Makefile.in: Regenerate.
1380 * cgen-asm.in (insert_normal): Result is error message now.
1381 Validate value to be inserted.
1382 (insert_insn_normal): Result is error message now.
1383 (@arch@_cgen_assemble_insn): Update.
1384 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1385 arguments. Don't perform validation here.
1386 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1388 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1390 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1391 operand instance list.
1392 * m32r-opc.c: Regenerate.
1394 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1396 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1397 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1399 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1401 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1403 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1405 * configure.in: Get the version number from BFD.
1406 * configure: Rebuild.
1408 From H.J. Lu <hjl@gnu.org>:
1409 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1410 * Makefile.in: Rebuild.
1412 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1414 * m32r-opc.c: Regenerate.
1415 * m32r-opc.h: Regenerate.
1417 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1419 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1420 Ignore ALIAS insns if asked to.
1421 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1422 * m32r-opc.c: Regenerate.
1425 * dvp.opc.c: Nicely format opcode tables.
1426 (vu_operands): New element UFLAGS.
1427 (parse_uflags,print_uflags): New functions.
1428 (vu_upper_opcodes): Add UFLAGS to all insns.
1431 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1433 Fix rac to accept only a0:
1434 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1435 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1436 Introduce OPERAND_GPR.
1437 * d10v-dis.c (print_operand): Likewise.
1439 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1441 * cgen-opc.in: New file.
1442 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1443 * Makefile.am (CGENFILES): Add cgen-opc.in.
1444 * Makefile.in: Regenerate.
1446 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1447 (cgen_hw_lookup): Make result const.
1449 * cgen-dis.in (*): Use PTR instead of void *.
1450 (print_insn): Delete unused vars `i', `syntax'.
1452 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1455 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1457 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1458 (vif_opcodes): Update renamed insns.
1459 * dvp-dis.c (*): Likewise.
1462 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1464 * configure, aclocal.m4: Rebuild with new libtool.
1466 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1468 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1469 instructions use a PC relative branch, not absolute.
1471 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1473 * configure.in: Set libtool_enable_shared rather than
1474 libtool_shared. Remove diversion hack.
1475 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1477 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1479 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1480 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1482 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1484 * tic30-dis.c: New file.
1485 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1486 * configure.in: Handle bfd_tic30_arch.
1487 * Makefile.am: Rebuild dependencies.
1488 (CFILES): Add tic30-dis.c
1489 (ALL_MACHINES): Add tic30-dis.lo.
1490 * configure, Makefile.in: Rebuild.
1492 start-sanitize-m32rx
1493 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1495 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1496 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1497 macwhi-a and macwlo-a instructions.
1501 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1503 * dvp-opc.c, fixed encoding of a bunch of instructions to
1504 be consistent with the asmvu assembler (and inconsistent
1505 with the specification).
1507 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1509 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1510 in the opcode table. The pkemscalf instruction must come first.
1512 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1514 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1517 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1519 * m32r-opc.h (HAVE_CPU_M32R): Define.
1522 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1524 * dvp-dis.c, dvp-opc.c: New files.
1525 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1526 * configure: Regenerate.
1527 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1528 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1529 (mips-dis.lo): Compile with @archdefs@.
1530 * Makefile.in: Regenerate.
1531 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1532 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1535 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1537 * v850-opc.c (insertion routines): If both alignment and size is
1538 wrong then report this.
1540 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1542 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1543 Only recognize instructions for the current target_processor.
1545 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1547 * d10v-dis.c (PC_MASK): Correct value.
1548 (print_operand): If there's a reloc, don't calculate the
1549 address because they could be in different sections.
1551 start-sanitize-cygnus
1552 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1554 * cgen.sh: Rewrite to be like simulator's version.
1555 * Makefile.am (cgen): Update call to cgen.sh.
1556 * Makefile.in: Regenerate
1559 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1561 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1562 instruction after the 4650's "mul" instruction; nobody's using the
1563 4010 these days. If object files someday indicate which processor
1564 variant they're intended for, we can do a better job at this.
1566 start-sanitize-r5900
1567 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1569 * mips-opc.c (c.lt.s): Add r5900 variant.
1573 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1575 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1576 table provided entry size. Use CGEN_INSN_MNEMONIC.
1577 (cgen_parse_keyword): Rewrite.
1578 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1579 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1580 * cgen-opc.c: Clean up pass over `struct foo' usage.
1581 (cgen_keyword_lookup_value): Handle "" entry.
1582 (cgen_keyword_add): Likewise.
1583 start-sanitize-cygnus
1584 * Makefile.am: Add cgen support.
1585 * Makefile.in: Regenerate.
1586 * configure.in: Add cgen support.
1587 * configure: Regenerate.
1588 * aclocal.m4: Regenerate.
1589 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1592 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1594 * mips-opc.c: Add FP_D to s.d instruction flags.
1596 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1598 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1600 start-sanitize-tic80
1601 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1603 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1604 PC relative offset forms before the 15 bit forms. An assembler command
1605 line option now chooses the default.
1608 start-sanitize-r5900
1609 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1611 * mips-opc.c: Add many missing r5900 instructions.
1614 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1616 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1617 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1619 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1621 * configure: Only build libopcodes shared if --enable-shared's value
1622 was `yes', or was set to `*opcodes*'.
1623 * aclocal.m4: Likewise.
1624 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1625 original source of this bit of code. It's not clear what the best fix
1628 start-sanitize-r5900
1629 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1631 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1633 start-sanitize-tic80
1634 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1636 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1637 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1638 offset forms before the 15 bit forms, to default to the long forms.
1641 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1643 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1645 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1647 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1648 symbol if none is present.
1649 (print_insn_big_arm): Prevent examination of stored symbol if
1652 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1654 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1656 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1658 * disassemble.c: Remove disasm_symaddr() function.
1660 * arm-dis.c: Use info->symbol instead of info->flags to determine
1661 if disassmbly should be in Thumb or Arm mode.
1663 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1665 * arm-dis.c: Add support for disassembling Thumb opcodes.
1666 (print_insn_thumb): New function.
1668 * disassemble.c (disasm_symaddr): New function.
1670 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1671 (thumb_opcodes): Table of Thumb opcodes.
1673 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1675 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1677 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1678 and 'v' as operand types.
1680 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1682 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1683 <olivier.carmona@di.epfl.ch>.
1684 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1685 which has a two word opcode with a one word argument.
1687 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1689 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1690 unsigned, not signed.
1691 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1693 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1695 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1696 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1697 (ftrv): Slay the cut-and-paste monster.
1699 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1701 * d10v-dis.c (print_operand):
1702 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1704 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1706 * d10v-opc.c (OPERAND_FLAG): Split into:
1707 (OPERAND_FFLAG, OPERAND_CFLAG) .
1711 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1713 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1714 field for all INSN_MACRO's.
1715 * mips16-opc.c: same
1717 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1719 * mips-opc.c (sync,cache): These are 3900 insns.
1721 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1723 sh-opc.h (sh_table): Remove ftst/nan.
1725 start-sanitize-cygnus
1726 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1728 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1729 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1731 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1735 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1737 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1738 Add tx49 insns and configury.
1741 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1743 * mips-opc.c (ffc, ffs): Fix mask.
1745 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1747 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1750 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1752 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1753 start-sanitize-cygnus
1754 Added VR5400 instructions.
1755 (N5): New cpu-id macro.
1757 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1759 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1761 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1762 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1764 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1766 * v850-dis.c (disassemble): Replace // with /* ... */
1768 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1770 * sparc-opc.c: Add wr & rd for v9a asr's.
1771 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1772 (v9a_asr_reg_names): New variable.
1773 Patch from David Miller <davem@vger.rutgers.edu>.
1775 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1777 * sparc-opc.c (v9notv9a): New insn type.
1778 (IMPDEP): Move to the end to not conflict with edge8 et al.
1779 Patch from David Miller <davem@vger.rutgers.edu>.
1781 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1783 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1785 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1787 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1789 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1791 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1792 of disassemble_info structure to determine if an overlay address
1793 has a matching symbol in low memory.
1795 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1796 new symbol_at_address_func field in disassemble_info structure.
1798 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1800 * v850-opc.c (extract_d22): Use signed arithmatic.
1802 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1804 * mips-opc.c: Three op mult is not an ISA insn.
1806 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1808 * mips-opc.c: Fix formatting.
1810 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1812 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1813 than assuming that char is signed. Explicitly sign extend 16 bit
1814 values, rather than assuming that short is 16 bits.
1815 (OP_sI, OP_J, OP_DIR): Likewise.
1817 start-sanitize-v850e
1818 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1820 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1824 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1826 * v850-opc.c: Fix typo in comment.
1828 * v850-dis.c (disassemble): Add test of processor type when
1829 determining opcodes.
1831 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1833 * configure.in: Use a diversion to set enable_shared before the
1834 arguments are parsed.
1835 * configure: Rebuild.
1837 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1839 * m68k-opc.c (TBL1): Use ! rather than `.
1840 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1842 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1844 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1846 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1848 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1851 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1852 * aclocal.m4: Rebuild with new libtool.
1853 * configure: Rebuild.
1855 start-sanitize-v850e
1856 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1858 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1861 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1863 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1865 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1867 * v850-opc.c (v850_opcodes): Further rearrangements.
1869 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1871 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1873 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1875 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1878 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1880 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1882 * mips16-opc.c: Added mips16 sdbbp.
1885 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1887 * v850-opc.c: Initialise processors field of v850_opcode structure.
1889 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1891 Merge changes from Martin Hunt:
1893 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1895 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1896 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1897 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1899 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1901 * d30v-dis.c (print_insn): First operand of d*i (delayed
1902 branch) instructions is relative.
1904 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1905 (d30v_operand_table): Add IMM6S3 type.
1906 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1908 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1909 and cmp instructions.
1911 * d30v-opc.c: Correct entries for repeat*, and sat*.
1912 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1913 types. Correct several formats.
1915 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1917 * d30v-opc.c (pre_defined_registers): Change control registers.
1919 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1920 SHORT_C2. Manual was incorrect.
1922 * d30v-dis.c (lookup_opcode): Return value now indicates
1923 if an opcode has a short and a long form. Used for deciding
1924 to append a ".s" or ".l".
1925 (print_insn): Append a ".s" to an instruction if it is
1926 the short form and ".l" if it is a long form. Do not append
1927 anything if the instruction has only one possible size.
1929 * d30v-opc.c: Change mulx2h to require an even register.
1930 New form: SHORT_A2; a SHORT_A form that needs an even
1931 register as the first operand.
1933 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1934 instruction was not being disassembled if there were an odd
1935 number of instructions.
1937 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1939 start-sanitize-v850e
1940 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1942 * v850-dis.c (disassemble): Improved display of register lists.
1945 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1947 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1948 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1949 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1950 fandnot1s, fandnot2s.
1952 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1954 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1956 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1958 * cgen-asm.c (cgen_parse_address): New argument resultp.
1959 All callers updated.
1960 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1962 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1964 * mn10200-dis.c (disassemble): PC relative instructions are
1965 relative to the next instruction, not the current instruction.
1967 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1969 * v850-dis.c (disassemble): Only signed extend values that are not
1970 returned by extract functions.
1971 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1973 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1975 * v850-opc.c: Update comments. Remove use of
1976 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1978 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1980 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1982 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1984 * configure: Rebuilt with latest devo autoconf for NT support.
1986 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1988 * v850-dis.c (disassemble): Use curly brace syntax for register
1991 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1992 where r0 is being used as a destination register.
1994 start-sanitize-v850e
1995 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1997 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2000 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2002 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2003 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2004 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2005 Add insns to access SGR and DBR.
2006 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2008 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2010 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2012 start-sanitize-v850e
2013 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2015 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2016 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2019 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2021 * configure (cgen_files): Add support for v850e target.
2022 * configure.in (cgen_files): Add support for v850e target.
2024 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2026 * configure (cgen_files): Add support for v850ea target.
2027 * configure.in (cgen_files): Add support for v850ea target.
2030 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2032 * configure.in (bfd_arc_arch): Add.
2033 * configure: Rebuild.
2034 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2035 * Makefile.in: Rebuild.
2036 * arc-dis.c, arc-opc.c: New files.
2037 * disassemble.c (ARCH_all): Define ARCH_arc.
2038 (disassembler): Add ARC support.
2040 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2042 start-sanitize-v850e
2043 * v850-dis.c (disassemble): Add support for v850EA instructions.
2045 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2046 (v850_opcodes): Add v850EA instructions.
2048 * v850-dis.c (disassemble): Add support for v850E instructions.
2050 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2051 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2052 insert_spe, extract_spe): New Functions.
2053 (v850_opcodes): Add v850E instructions.
2056 * v850-opc.c: Reorganised and re-layed out to improve readability
2059 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2061 * configure: Rebuild with autoconf 2.12.1.
2063 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2065 * aclocal.m4, configure: Rebuild with new automake patches.
2067 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2069 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2070 * acinclude.m4: Just include acinclude.m4 from BFD.
2071 * aclocal.m4, configure: Rebuild.
2073 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2075 * Makefile.am: New file, based on old Makefile.in.
2076 * acconfig.h: New file.
2077 * acinclude.m4: New file.
2078 * stamp-h.in: New file.
2079 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2080 Removed shared library handling; now handled by libtool. Replace
2081 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2082 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2083 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2084 handling in AC_OUTPUT.
2085 * dep-in.sed: Change .o to .lo.
2086 * Makefile.in: Now built with automake.
2087 * aclocal.m4: Now built with aclocal.
2088 * config.in, configure: Rebuild.
2090 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2092 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2094 start-sanitize-r5900
2095 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2097 * mips-opc.c: Fix coding of mtsa.
2100 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2102 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2104 * sparc-dis.c (sorted_opcodes): New static local.
2105 (struct opcode_hash): `opcode' is pointer to const element.
2106 (build_hash): First arg is now table of sorted pointers.
2107 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2108 (compare_opcodes): Update.
2110 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2112 * cgen-opc.c: #include <ctype.h>.
2113 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2114 Handle case insensitive hashing.
2115 (hash_keyword_value): Change type of `value' to unsigned int.
2117 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2119 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2120 precision FP, mark it as such. Likewise for double precision
2121 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2123 start-sanitize-r5900
2124 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2127 start-sanitize-r5900
2128 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2130 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2131 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2134 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2136 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2138 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2139 nesting depth when all the macros are expanded.
2141 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2143 * sparc-opc.c: The fcmp v9a instructions take an integer register
2144 as a destination, not a floating point register. From Christian
2145 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2147 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2149 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2150 syntax. From Roman Hodek
2151 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2153 * i386-dis.c (twobyte_has_modrm): Fix pand.
2155 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2157 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2159 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2161 * arm-dis.c: Add prototypes for arm_decode_shift and
2164 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2166 * mips-opc.c: Add r3900 insns.
2168 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2170 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2171 print delay slot instructions on the same line. When using a PC
2172 relative load, add a comment with the value being loaded if it can
2175 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2177 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2178 to pushS/popS for segment regs and byte constant so that
2179 pushw/popw printed when in 16 bit data mode.
2181 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2182 print cbtw, cwtd in 16 bit data mode.
2183 * i386-dis.c (putop): extra case W to support above.
2185 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2186 address size prefix in 16 bit address mode.
2188 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2190 * sh-dis.c: Reindent. Rename local variable fprintf to
2193 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2195 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2197 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2199 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2201 * mips16-opc.c (mip16_opcodes): same.
2203 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2205 * m68k-opc.c (moveb): Change $d to %d.
2207 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2209 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2210 (twobyte_has_modrm): Likewise.
2212 (OP_MMX, OP_EM, OP_MS): New static functions.
2214 * i386-dis.c: Revert patch of April 4. The output now matches
2217 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2219 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2222 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2224 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2226 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2228 * Makefile.in (install): Depend upon installdirs.
2229 (installdirs): New target.
2231 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2233 From Thomas Graichen <graichen@rzpd.de>:
2234 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2235 * configure: Rebuild.
2237 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2239 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2240 Delete string{,s}.h support.
2242 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2244 * cgen-asm.c (cgen_parse_operand_fn): New global.
2245 (cgen_parse_{{,un}signed_integer,address}): Update call to
2246 cgen_parse_operand_fn.
2247 (cgen_init_parse_operand): New function.
2248 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2249 from cgen_asm_init_parse.
2250 (m32r_cgen_assemble_insn): New operand `errmsg'.
2251 Delete call to as_bad, return error message to caller.
2252 (m32r_cgen_asm_hash_keywords): #if 0 out.
2254 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2256 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2258 [case 'J']: Fix typo in register name.
2260 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2262 * configure.in: Substitute SHLIB_LIBS.
2263 * configure: Rebuild.
2264 * Makefile.in (SHLIB_LIBS): New variable.
2265 ($(SHLIB)): Use $(SHLIB_LIBS).
2267 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2269 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2271 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2273 * disassemble.c (disassembler): Handle m32r.
2275 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2277 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2278 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2279 * Makefile.in (CFILES): Add them.
2280 (ALL_MACHINES): Add them.
2281 (dependencies): Regenerate.
2282 * configure.in (cgen_files): New variable.
2283 (bfd_m32r_arch): Add entry.
2284 * configure: Regenerate.
2286 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2288 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2289 * configure: Rebuild.
2291 * Makefile.in: Rebuild dependencies.
2293 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2295 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2298 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2300 * Branched binutils 2.8.
2302 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2304 * m10200-dis.c: Rename from mn10200-dis.c.
2305 * m10200-opc.c: Rename from mn10200-opc.c.
2306 * m10300-dis.c: Rename from mn10300-dis.c
2307 * m10300-opc.c: Rename from mn10300-opc.c.
2308 * Makefile.in: Update accordingly.
2310 * mips16-opc.c: Add mul and dmul macros.
2312 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2314 * makefile.vms: Update CFLAGS, add clean target.
2316 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2318 * mips-opc.c: Add "wait". From Ralf Baechle
2319 <ralf@gnu.ai.mit.edu>.
2321 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2322 * configure, config.in: Rebuild.
2323 * sysdep.h: Include <stdlib.h> if it exists.
2324 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2326 * Makefile.in: Rebuild dependencies.
2328 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2330 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2331 Andrew Bray <andy@madhouse.demon.co.uk>.
2333 * mips-opc.c: Add cast when setting mips_opcodes.
2335 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2337 * v850-dis.c (disassemble): Fix sign extension problem.
2338 * v850-opc.c (extract_d*): Fix sign extension problems to make
2339 disassembly calculate branch offsets correctly.
2341 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2343 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2345 * mips-opc.c: Add dctr and dctw.
2347 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2349 * d30v-dis.c (print_insn): Change the way signed constants
2352 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2354 * Makefile.in (BFD_H): New variable.
2355 (HFILES): New variable.
2356 (CFILES): Add all C files.
2357 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2358 Delete old dependencies, and build new ones.
2359 * dep-in.sed: New file.
2361 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2363 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2365 start-sanitize-coldfire
2366 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2368 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2371 end-sanitize-coldfire
2372 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2374 * mn10200-opc.c: Change "trap" to "syscall".
2375 * mn10300-opc.c: Add new "syscall" instruction.
2377 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2379 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2380 mulul insns on the coldfire.
2382 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2384 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2385 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2386 (print_insn_little_arm): Likewise.
2388 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2390 Based on patches from H.J. Lu <hjl@lucon.org>:
2391 * i386-dis.c (fetch_data): Add prototype.
2392 * m68k-dis.c (fetch_data): Add prototype.
2393 (dummy_print_address): Add prototype. Make static.
2394 * ppc-opc.c (valid_bo): Add prototype.
2395 * sparc-dis.c (build_hash_table): Add prototype.
2396 (is_delayed_branch, compute_arch_mask): Add prototypes.
2397 (print_insn_sparc): Make several local variables const.
2398 (compare_opcodes): Change arguments to const PTR. Add prototype.
2399 * sparc-opc.c (arg): Change name field to be const.
2400 (lookup_name, lookup_value): Add prototypes. Change table and
2401 name parameters to be const.
2402 (sparc_encode_asi): Change name parameter to be const.
2403 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2404 (sparc_encode_sparclet_cpreg): Likewise.
2405 (sparc_decode_asi): Change return type to be const.
2406 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2407 (sparc_decode_sparclet_cpreg): Likewise.
2409 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2411 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2412 Solaris doesn't like the combined options, and the -f is
2414 (stamp-tshlink, install): Likewise.
2416 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2418 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2421 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2423 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2425 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2427 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2430 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2432 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2434 start-sanitize-tic80
2435 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2437 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2439 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2441 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2444 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2446 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2447 floatformat_to_double to make portable.
2448 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2451 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2453 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2454 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2456 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2458 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2459 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2461 start-sanitize-tic80
2462 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2464 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2465 (OFF_SL_BR_SCALED): ... to this, and added the flag
2466 TIC80_OPERAND_BASEREL to the flags word.
2467 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2471 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2473 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2474 Change mips_opcodes from const array to a pointer,
2475 and change bfd_mips_num_opcodes from const int to int,
2476 so that we can increase the size of the mips opcodes table
2479 start-sanitize-tic80
2480 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2482 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2483 store BITNUM values in the table in one's complement form
2484 to match behavior when assembler is given a raw numeric
2485 value for a BITNUM operand.
2486 * tic80-dis.c (print_operand_bitnum): Ditto.
2489 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2491 * d30v-opc.c: Removed references to FLAG_X.
2493 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2495 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2497 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2499 * Makefile.in: Added d30v object files.
2500 * configure: (bfd_d30v_arch) Rebuilt.
2501 * configure.in: (bfd_d30v_arch) Added new case.
2502 * d30v-dis.c: New file.
2503 * d30v-opc.c: New file.
2504 * disassemble.c (disassembler) Add entry for d30v.
2506 start-sanitize-tic80
2507 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2509 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2510 representations for the floating point BITNUM values.
2512 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2514 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2515 in the table in one's complement form, as they appear in the
2517 (tic80_symbol_to_value): Use macros to access predefined
2519 (tic80_value_to_symbol): Ditto.
2520 (tic80_next_predefined_symbol): New function.
2521 * tic80-dis.c (print_operand_bitnum): Remove code that did
2522 one's complement for BITNUM values.
2525 start-sanitize-r5900
2526 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2528 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2531 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2533 * makefile.vms: Remove 8 bit characters. Update to latest
2536 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2538 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2540 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2542 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2543 (IMM24_PCREL): Likewise.
2545 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2547 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2548 address for an extended PC relative instruction that is not a
2551 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2553 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2556 start-sanitize-tic80
2557 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2559 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2560 (tic80_opcodes): Sort entries so that long immediate forms
2561 come after short immediate forms, making it easier for
2562 assembler to select the right one for a given operand.
2565 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2567 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2569 (print_insn_mips16): Likewise.
2571 start-sanitize-r5900
2572 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2574 * mips-opc.c: add r5900.
2577 start-sanitize-tic80
2578 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2580 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2581 a symbol class that restricts translation to just that
2582 class (general register, condition code, etc).
2584 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2586 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2587 and REG_DEST_E for register operands that have to be
2588 an even numbered register. Add REG_FPA for operands that
2589 are one of the floating point accumulator registers.
2590 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2591 (tic80_opcodes): Change entries that need even numbered
2592 register operands to use the new operand table entries.
2593 Add "or" entries that are identical to "or.tt" entries.
2596 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2598 * mips16-opc.c: Add new cases of exit instruction for
2600 * mips-dis.c (print_mips16_insn_arg): Display floating point
2601 registers in operands of exit instruction. Print `$' before
2602 register names in operands of entry and exit instructions.
2604 start-sanitize-tic80
2605 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2607 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2608 pairs for all predefined symbols recognized by the assembler.
2609 Also used by the disassembling routines.
2610 (tic80_symbol_to_value): New function.
2611 (tic80_value_to_symbol): New function.
2612 * tic80-dis.c (print_operand_control_register,
2613 print_operand_condition_code, print_operand_bitnum):
2614 Remove private tables and use tic80_value_to_symbol function.
2617 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2619 * d10v-dis.c (print_operand): Change address printing
2620 to correctly handle PC wrapping. Fixes PR11490.
2622 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2624 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2627 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2629 * mips-dis.c (print_insn_mips16): Set insn_info information.
2630 (print_mips16_insn_arg): Likewise.
2632 * mips-dis.c (print_insn_mips16): Better handling of an extend
2633 opcode followed by an instruction which can not be extended.
2635 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2637 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2638 coldfire moveb instruction to not allow an address register as
2639 destination. Although the documentation does not indicate that
2640 this is invalid, experiments uncovered unexpected behavior.
2641 Added a comment explaining the situation. Thanks to Andreas
2642 Schwab for pointing this out to me.
2644 start-sanitize-tic80
2645 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2647 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2648 entries are presorted so that entries with the same mnemonic are
2649 adjacent to each other in the table. Sort the entries for each
2650 instruction so that this is true.
2653 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2655 * m68k-dis.c: Include <libiberty.h>.
2656 (print_insn_m68k): Sort the opcode table on the most significant
2657 nibble of the opcode.
2659 start-sanitize-tic80
2660 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2662 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2663 "vsub", "vst", "xnor", and "xor" instructions.
2664 (V_a1): Renamed from V_a, msb of accumulator reg number.
2665 (V_a0): Add macro, lsb of accumulator reg number.
2667 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2669 * tic80-dis.c (print_insn_tic80): Broke excessively long
2670 function up into several smaller ones and arranged for
2671 the instruction printing function to be callable recursively
2672 to print vector instructions that have both a load and a
2673 math instruction packed into a single opcode.
2674 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2675 to explain why it comes after the other vector opcodes.
2678 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2680 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2681 move insns to handle immediate operands.
2683 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2685 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2686 fix operand mask in the "moveml" entries for the coldfire.
2688 start-sanitize-tic80
2689 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2691 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2692 New macros for building vector instruction opcodes.
2693 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2694 FMT_LI, which were unused. The field is now a flags field.
2695 Remove some opcodes that are possible, but illegal, such
2696 as long immediate instructions with doubles for immediate
2697 values. Add "vadd" and "vld" instructions.
2699 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2701 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2702 the order more logical. Move the shift alias instructions ("rotl",
2703 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2704 interspersed with the regular sr.x and sl.x instructions. Add
2705 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2706 "sub", "subu", "swcr", and "trap".
2708 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2710 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2711 (OFF_SL_PC): Renamed from OFF_SL.
2712 (OFF_SS_BR): New operand type for base relative operand.
2713 (OFF_SL_BR): New operand type for base relative operand.
2714 (REG_BASE): New operand type for base register operand.
2715 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2716 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2717 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2719 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2720 10 char field, padded with spaces on rhs, rather than a string
2721 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2722 than old TIC80_OPERAND_RELATIVE. Add support for new
2723 TIC80_OPERAND_BASEREL flag bit.
2725 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-dis.c (print_insn_tic80): Print floating point operands
2729 * tic80-opc.c (SPFI): Add single precision floating point
2730 immediate operand type.
2731 (ROTATE): Add rotate operand type for shifts.
2732 (ENDMASK): Add for shifts.
2733 (n): Macro for the 'n' bit.
2734 (i): Macro for the 'i' bit.
2735 (PD): Macro for the 'PD' field.
2736 (P2): Macro for the 'P2' field.
2737 (P1): Macro for the 'P1' field.
2738 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2742 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2744 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2745 adding in current address for pc-relative operands.
2747 start-sanitize-tic80
2748 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2750 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2751 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2752 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2753 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2754 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2755 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2756 (REG_SCALED, LSI_SCALED): New operand types.
2757 (E): New macro for 'E' bit at bit 27.
2758 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2759 opcodes, including the various size flavors (b,h,w,d) for
2760 the direct load and store instructions.
2762 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2764 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2766 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2767 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2768 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2769 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2770 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2771 masks with "MASK_* & ~M_*" to get the M bit reset.
2772 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2774 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2776 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2777 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2778 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2780 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2781 CC, SICR, and LICR table entries.
2782 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2783 "bcnd", and "brcr" opcodes.
2786 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2788 * ppc-opc.c (powerpc_operands): Make comment match the
2789 actual fields (no shift field).
2790 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2791 start-sanitize-tic80
2792 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2793 partial implementation, work in progress.
2794 * tic80-opc.c (tic80_operands): Begin construction operands table.
2795 (tic80_opcodes): Continue populating opcodes table and start
2796 filling in the operand indices.
2797 (tic80_num_opcodes): Add this.
2800 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2802 * m68k-opc.c: Add #B case for moveq.
2804 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2806 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2807 before they are used.
2809 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2811 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2812 for "breakpoint" instruction.
2814 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2816 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2817 (dep): Use ALL_CFLAGS rather than CFLAGS.
2819 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2821 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2824 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2826 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2827 start-sanitize-tic80
2828 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2831 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2833 * mips16-opc.c: Add "abs".
2835 start-sanitize-tic80
2836 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2838 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2839 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2840 (disassembler): Add bfd_arch_tic80 support to set disassemble
2841 to print_insn_tic80.
2842 * tic80-dis.c (print_insn_tic80): Add stub.
2844 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2846 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2847 * configure: Regenerate with autoconf.
2848 * tic80-dis.c: Add file.
2849 * tic80-opc.c: Add file.
2852 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2854 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2856 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2858 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2859 (mn10200_opcodes): Use it for some logicals and btst insns.
2860 Add "break" and "trap" instructions.
2862 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2864 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2866 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2868 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2869 relative load or add now depends upon whether the instruction is
2872 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2874 * mn10200-dis.c: Finish writing disassembler.
2875 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2876 Fix mask for "jmp (an)".
2878 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2879 handle endianness issues for mn10300.
2881 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2883 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2885 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2886 instruction. Fix opcode field for "movb (imm24),dn".
2888 * mn10200-opc.c (mn10200_operands): Fix insertion position
2891 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2893 * mn10200-opc.c: Create mn10200 opcode table.
2894 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2895 but moving along nicely.
2897 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2899 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2901 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2903 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2904 specifiers for fmovem* instructions.
2906 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2908 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2910 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2912 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2915 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2917 * mn10300-opc.c: Add some comments explaining the various
2920 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2922 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2924 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2927 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2928 operand specifiers in fmovm* instructions.
2930 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2932 * ppc-opc.c (insert_li): Give an error if the offset has the two
2933 least significant bits set.
2935 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2937 * mips-dis.c (print_insn_mips16): Separate the instruction from
2938 the arguments with a tab, not a space.
2940 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2942 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2945 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2948 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2950 * configure: Rebuild with autoconf 2.12.
2952 Add support for mips16 (16 bit MIPS implementation):
2953 * mips16-opc.c: New file.
2954 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2955 (mips16_reg_names): New static array.
2956 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2957 after seeing a 16 bit symbol.
2958 (print_insn_little_mips): Likewise.
2959 (print_insn_mips16): New static function.
2960 (print_mips16_insn_arg): New static function.
2961 * mips-opc.c: Add jalx instruction.
2962 * Makefile.in (mips16-opc.o): New target.
2963 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2964 * configure: Rebuild.
2966 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2968 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2969 operand specifiers in *save, *restore and movem* instructions.
2971 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2974 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2975 register operands for immediate arithmetic, not, neg, negx, and
2976 set according to condition instructions.
2978 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2979 specifier of the effective-address operand in immediate forms of
2980 arithmetic instructions. The specifier for the immediate operand
2981 notes how and where the constant will be stored.
2983 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2985 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2988 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2991 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2993 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2995 * mn10300-dis.c (disassemble): Handle register lists.
2997 * mn10300-opc.c: Fix handling of register list operand for
2998 "call", "ret", and "rets" instructions.
3000 * mn10300-dis.c (disassemble): Print PC-relative and memory
3001 addresses symbolically if possible.
3002 * mn10300-opc.c: Distinguish between absolute memory addresses,
3003 pc-relative offsets & random immediates.
3005 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3007 (disassemble): Handle SPLIT and EXTENDED operands.
3009 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3011 * mn10300-dis.c: Rough cut at printing some operands.
3013 * mn10300-dis.c: Start working on disassembler support.
3014 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3016 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3018 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3020 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3022 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3024 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3026 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3027 register argument is calls and jmp instructions.
3029 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3031 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3032 getx operand. Fix opcode for mulqu imm,dn.
3034 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3036 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3037 in MN10300_OPERAND_SPLIT operands for how many bits
3038 appear in the basic insn word. Add IMM32_HIGH24,
3039 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3040 (mn10300_opcodes): Use new operands as needed.
3042 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3043 for bset, bclr, btst instructions.
3044 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3046 * mn10300-opc.c (mn10300_operands): Remove many redundant
3047 operands. Update opcode table as appropriate.
3048 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3049 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3051 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3053 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3054 operands (for indexed load/stores). Fix bitpos for DI
3055 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3056 few instructions that insert immediates/displacements in the
3057 middle of the instruction. Add IMM8E for 8 bit immediate in
3058 the extended part of an instruction.
3059 (mn10300_operands): Use new opcodes as appropriate.
3061 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3063 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3064 sequential so the assembler never parallelizes it with
3067 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3069 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3070 a data/address register that appears in register field 0
3071 and register field 1.
3072 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3074 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3076 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3077 standard disassembly.
3079 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3080 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3081 Recategorize PALcode instructions.
3083 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3085 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3087 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3089 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3090 there are no operand types.
3092 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3094 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3096 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3098 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3100 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3102 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3104 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3105 and sst.w instructions.
3107 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3110 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3112 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3115 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3117 * ppc-opc.c (PPCPWR2): Define.
3118 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3121 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3123 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3124 field for movhu instruction.
3126 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3127 cast value to "long" not "signed long" to keep hpux10
3130 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3132 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3135 * mn10300-opc.c (FMT*): Remove definitions.
3137 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3138 for shift-by-register opcodes.
3140 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3141 into [AD][MN][01] for encoding the position of the register
3144 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3146 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3147 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3149 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3151 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3152 Fix various typos. Add "PAREN" operand.
3153 (MEM, MEM2): Define.
3154 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3155 operands. Fix several typos.
3157 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3160 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3162 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3163 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3165 (mn10300_opcodes): Break opcode format out into its own field.
3166 Update many operand fields to deal with signed vs unsigned
3167 issues. Fix one or two typos in the "mov" instruction
3168 opcode, mask and/or operand fields.
3170 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3172 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3173 m68851 wasn't reset.
3175 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3177 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3178 all opcodes. Very rough cut at operands for all opcodes.
3180 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3183 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3185 * mn10200-opc.c, mn10300-opc.c: New files.
3186 * mn10200-dis.c, mn10300-dis.c: New files.
3187 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3188 * disassemble.c: Break mn10x00 support into 10200 and 10300
3190 * configure.in: Likewise.
3191 * configure: Rebuilt.
3193 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3195 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3197 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3199 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3201 * disassemble (ARCH_mn10x00): Define.
3202 (disassembler): Handle bfd_arch_mn10x00.
3203 * configure.in: Recognize bfd_mn10x00_arch.
3204 * configure: Rebuilt.
3206 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3208 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3209 accordingly. Don't declare functions using op_rtn.
3211 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3213 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3214 params to be more standard.
3215 * (disassemble): Print absolute addresses and symbolic names for
3216 branch and jump targets.
3217 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3219 * (v850_opcodes): Add breakpoint insn.
3221 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3223 * m68k-opc.c: Move the fmovemx data register cases before the
3224 other cases, so that they get recognized before the data register
3225 does gets treated as a degenerate register list.
3227 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3229 * mips-opc.c: Add a case for "div" and "divu" with two registers
3230 and a destination of $0.
3232 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3234 * mips-dis.c (print_insn_arg): Add prototype.
3235 (_print_insn_mips): Ditto.
3237 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3239 * mips-dis.c (print_insn_arg): Print condition code registers as
3242 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3244 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3246 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3248 * v850-dis.c (disassemble): Make static. Provide prototype.
3250 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3252 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3255 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3257 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3258 ']' characters into the output stream.
3259 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3260 Add "memop" field to all opcodes (for the disassembler).
3261 Reorder opcodes so that "nop" comes before "mov" and "jr"
3262 comes before "jarl".
3264 * v850-dis.c (print_insn_v850): Fix typo in last change.
3266 * v850-dis.c (print_insn_v850): Properly handle disassembling
3267 a two byte insn at the end of a memory region when the memory
3268 region's size is only two byte aligned.
3270 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3272 * v850-dis.c (v850_reg_names): Define.
3273 (v850_sreg_names, v850_cc_names): Likewise.
3274 (disassemble): Very rough cut at printing operands (unformatted).
3276 * v850-opc.c (BOP_MASK): Fix.
3277 (v850_opcodes): Fix mask for jarl and jr.
3279 * v850-dis.c: New file. Skeleton for disassembler support.
3280 * Makefile.in Remove v850 references, they're not needed here.
3281 * configure.in: Add v850-dis.o when building v850 toolchains.
3282 * configure: Rebuilt.
3283 * disassemble.c (disassembler): Call v850 disassembler.
3285 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3286 (insert_d8_6, extract_d8_6): New functions.
3287 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3288 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3290 (IF4A, IF4B): Use "D7" instead of "D7S".
3291 (IF4C, IF4D): Use "D8_7" instead of "D8".
3292 (IF4E, IF4F): New. Use "D8_6".
3293 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3294 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3296 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3297 (v850_operands): Change D16 to D16_15, use special insert/extract
3298 routines. New new D16 that uses the generic insert/extract code.
3299 (IF7A, IF7B): Use D16_15.
3300 (IF7C, IF7D): New. Use D16.
3301 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3303 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3304 message. Issue an error if the branch offset is odd.
3306 * v850-opc.c: Add notes about needing special insert/extract
3307 for all the load/store insns, except "ld.b" and "st.b".
3309 * v850-opc.c (insert_d22, extract_d22): New functions.
3310 (v850_operands): Use insert_d22 and extract_d22 for
3312 (insert_d9): Fix range check.
3314 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3316 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3317 and set bits field to D9 and D22 operands.
3319 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3321 * v850-opc.c (v850_operands): Define SR2 operand.
3322 (v850_opcodes): "ldsr" uses R1,SR2.
3324 * v850-opc.c (v850_opcodes): Fix opcode specs for
3325 sld.w, sst.b, sst.h, sst.w, and nop.
3327 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3329 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3330 end of the opcode table.
3332 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3334 * d10v-opc.c (pre_defined_registers): Added register pairs,
3335 "r0-r1", "r2-r3", etc.
3337 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3339 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3340 Create I16U for an unsigned 16bit mmediate operand.
3341 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3343 * v850-opc.c (v850_operands): Define EP operand.
3344 (IF4A, IF4B, IF4C, IF4D): Use EP.
3346 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3347 with immediate operand, "movhi". Tweak "ldsr".
3349 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3350 correct. Get sld.[bhw] and sst.[bhw] closer.
3352 * v850-opc.c (v850_operands): "not" is a two byte insn
3354 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3356 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3358 * v850-opc.c (two): Get order of words correct.
3360 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3362 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3363 register source and destination operands.
3364 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3366 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3367 same thinko in "trap" opcode.
3369 * v850-opc.c (v850_opcodes): Add initializer for size field
3372 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3373 Add D8 for 8-bit unsigned field in short load/store insns.
3374 (IF4A, IF4D): These both need two registers.
3375 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3376 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3377 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3378 for "ldsr" and "stsr".
3379 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3382 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3383 short store word (sst.w).
3385 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3387 * v850-opc.c (v850_operands): Added insert and extract fields,
3388 pointers to functions that handle unusual operand encodings.
3390 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3392 * v850-opc.c (v850_opcodes): Enable "trap".
3394 * v850-opc.c (v850_opcodes): Fix order of displacement
3395 and register for "set1", "clr1", "not1", and "tst1".
3397 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3399 * v850-opc.c (v850_operands): Add "B3" support.
3400 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3403 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3405 * v850-opc.c: Close unterminated comment.
3407 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3409 * v850-opc.c (v850_operands): Add flags field.
3410 (v850_opcodes): add move opcodes.
3412 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3414 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3415 * configure: (bfd_v850v_arch) Add new case.
3416 * configure.in: (bfd_v850_arch) Add new case.
3417 * v850-opc.c: New file.
3419 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3421 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3423 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3425 * d10v-opc.c: Add additional information to the opcode
3426 table to help determinine which instructions can be done
3429 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3431 * mpw-make.sed: Update editing of include pathnames to be
3434 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3436 * arm-opc.h: Added "bx" instruction definition.
3438 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3440 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3442 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3444 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3446 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3448 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3450 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3452 * makefile.vms: Update for alpha-opc changes.
3454 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3456 * i386-dis.c (print_insn_i386): Actually return the correct value.
3457 (ONE, OP_ONE): #ifdef out; not used.
3459 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3461 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3462 Changed subi operand type to treat 0 as 16.
3464 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3466 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3469 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3471 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3472 memory transfer instructions. Add new format string entries %h and %s.
3473 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3476 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3478 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3479 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3481 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3483 * alpha-dis.c (print_insn_alpha_osf): Remove.
3484 (print_insn_alpha_vms): Remove.
3485 (print_insn_alpha): Make globally visible. Chose the register
3486 names based on info->flavour.
3487 * disassemble.c: Always return print_insn_alpha for the alpha.
3489 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3491 * d10v-dis.c (dis_long): Handle unknown opcodes.
3493 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3495 * d10v-opc.c: Changes to support signed and unsigned numbers.
3496 All instructions with the same name that have long and short forms
3497 now end in ".l" or ".s". Divs added.
3498 * d10v-dis.c: Changes to support signed and unsigned numbers.
3500 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3502 * d10v-dis.c: Change all functions to use info->print_address_func.
3504 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3506 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3507 move ccr/sr insns more strict so that the disassembler only
3508 selects them when the addressing mode is data register.
3510 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3511 * d10v-opc.c (pre_defined_registers): Declare.
3512 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3513 to pick a better name for the registers.
3515 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3517 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3518 operands for fexpand and fpmerge. From Christian Kuehnke
3519 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3521 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3523 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3524 print routine. Take new regnames and cpumask arguments.
3525 Kill the environment variable nonsense.
3526 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3527 (print_insn_alpha_vms): New function. Do VMS style regnames.
3528 * disassemble.c (disassembler): Test bfd flavour to pick
3529 between OSF and VMS routines. Default to OSF.
3531 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3533 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3534 * configure: Rebuild.
3535 * Makefile.in (install): Use @INSTALL_SHLIB@.
3537 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3539 * configure: (bfd_d10v_arch) Add new case.
3540 * configure.in: (bfd_d10v_arch) Add new case.
3541 * d10v-dis.c: New file.
3542 * d10v-opc.c: New file.
3543 * disassemble.c (disassembler) Add entry for d10v.
3545 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3547 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3548 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3550 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3552 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3553 distinguish between variants of the instruction set.
3554 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3555 distinguish between variants of the instruction set.
3557 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3559 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3560 the 8086 instruction set.
3561 * i386-dis.c: General cleanups. Make most things static. Add
3562 prototypes. Get rid of static variables aflags and dflags. Pass
3563 them as args (to almost everything).
3565 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3567 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3569 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3571 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3572 if the next arg is marked with SRC_IN_DST. Gross.
3574 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3575 we're looking for and find EXR.
3577 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3578 if we're looking for KBIT and we don't find it.
3580 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3583 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3584 3bit immediate operands.
3586 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3588 * Released binutils 2.7.
3590 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3591 <kkaempf@progis.ac-net.de>.
3593 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3595 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3597 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3599 * sparc-dis.c (print_insn_sparclite): New routine to print
3600 sparclite instructions.
3602 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3604 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3606 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3608 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3609 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3610 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3612 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3614 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3615 Use autoconf-set values.
3616 (docdir, oldincludedir): Removed.
3617 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3619 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3621 * alpha-opc.c: New file.
3622 * alpha-opc.h: Remove.
3623 * alpha-dis.c: Complete rewrite to use new opcode table.
3624 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3625 * configure: Rebuild with autoconf 2.10.
3626 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3627 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3629 (alpha-opc.o): New target.
3631 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3633 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3634 Set imm_added_to_rs1 even if the source and destination register
3637 * sparc-opc.c: Add some two operand forms of the wr instruction.
3639 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3641 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3644 * disassemble.c (disassembler): Handle H8/S.
3645 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3647 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3649 * sparc-opc.c: Add beq/teq as aliases for be/te.
3651 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3652 <sergei@msil.sps.mot.com>.
3654 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3656 * makefile.vms: New file.
3658 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3660 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3662 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3665 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3667 * i386-dis.c (OP_OFF): Call append_prefix.
3669 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3671 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3672 unsigned long to silence a warning from the Solaris PowerPC
3675 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3677 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3679 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3681 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3683 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3684 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3685 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3686 cpush, cpusha, cpull sparclet insns.
3688 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3690 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3692 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3694 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3695 Set F_FLOAT on other floating point instructions.
3697 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3699 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3701 (powerpc_opcodes): Add 860/821 specific SPRs.
3703 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3705 * configure.in: Permit --enable-shared to specify a list of
3706 directories. Set and substitute BFD_PICLIST.
3707 * configure: Rebuild.
3708 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3709 uses. Set to @BFD_PICLIST@.
3711 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3713 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3714 not "abs", which may be needed for the absolute in something
3715 like btst #0,@10:8. Print L_3 immediates separately from other
3716 immediates. Change ABSMOV reference to ABS8MEM.
3718 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3720 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3721 (current_arch_mask): New static global.
3722 (compute_arch_mask): New static function.
3723 (print_insn_sparc): Delete sparc_v9_p. New static local
3724 current_mach. Resort opcode table if current_mach changes.
3725 Generalize "insn not supported" test.
3726 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3727 Delete test for v9/!v9.
3728 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3730 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3731 (brfcx): Renamed to FBRX.
3732 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3733 coprocessor mnemonics are not supported on the sparclet).
3734 (condf): Renamed to CONDF.
3735 (SLCBCC2): Delete F_ALIAS flag.
3737 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3739 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3740 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3742 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3744 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3745 that the shared library version number is set correctly.
3747 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3749 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3750 Miles Bader <miles@gnu.ai.mit.edu>.
3751 * configure: Rebuild.
3753 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3755 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3758 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3760 * configure: Rebuild with autoconf 2.8.
3762 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3764 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3765 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3767 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3769 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3770 since they appear as targets in Makefile.in.
3771 * configure: Rebuild.
3773 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3775 * mpw-make.sed: Edit out shared library support bits.
3777 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3779 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3780 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3781 (sparc_opcodes): Add sparclet insns.
3782 (sparclet_cpreg_table): New static local.
3783 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3784 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3786 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3788 * i386-dis.c (index16): New static variable.
3789 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3791 (OP_indirE): Return result of OP_E.
3792 (OP_E): Check for 16 bit addressing mode, and disassemble
3793 correctly. Optimised 32 bit case a little. Don't print
3794 "(base,index,scale)" when sib specifies only an offset.
3796 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3798 * configure.in: Set and substitute SHLIB_DEP.
3799 * configure: Rebuild.
3800 * Makefile.in (SHLIB_DEP): New variable.
3801 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3802 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3803 COMMON_SHLIB, add them to piclist with appropriate modifications.
3804 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3805 here: just use piclist.
3807 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3809 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3810 (print_insn_sparc): Rewrite v9/not-v9 tests.
3811 (compare_opcodes): Likewise.
3812 * sparc-opc.c (MASK_<ARCH>): Define.
3813 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3814 (sparclet,v6notv9): Define.
3815 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3816 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3818 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3820 * configure.in: Call AC_PROG_CC before configure.host.
3821 * configure: Rebuild.
3823 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3825 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3827 * i386-dis.c (onebyte_has_modrm): New static array.
3828 (twobyte_has_modrm): New static array.
3829 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3831 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3833 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3836 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3838 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3841 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3843 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3844 m68010up, not just m68020up | cpu32.
3846 * Makefile.in (SONAME): New variable.
3847 ($(SHLINK)): Make a link to the transformed name, as well.
3848 (stamp-tshlink): New target.
3849 (install): Skip stamp-tshlink during install.
3851 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3853 * configure.in: Call AC_ARG_PROGRAM.
3854 * configure: Rebuild.
3855 * Makefile.in (program_transform_name): New variable.
3856 (install): Transform library name before installing it.
3858 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3860 * i960-dis.c (mem): Add HX dcinva instruction.
3862 Support for building as a shared library, based on patches from
3863 Alan Modra <alan@spri.levels.unisa.edu.au>:
3864 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3865 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3866 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3867 * configure: Rebuild.
3868 * Makefile.in (ALLLIBS): New variable.
3869 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3870 (COMMON_SHLIB, SHLINK): New variables.
3871 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3872 (STAGESTUFF): Remove variable.
3873 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3874 (stamp-piclist, piclist): New targets.
3875 ($(SHLIB), $(SHLINK)): New targets.
3876 ($(OFILES)): Depend upon stamp-picdir.
3877 (disassemble.o): Build twice if PICFLAG is set.
3878 (MOSTLYCLEAN): Add pic/*.o.
3879 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3880 (distclean): Remove pic and stamp-picdir.
3881 (install): Install shared libraries.
3882 (stamp-picdir): New target.
3884 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3886 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3887 Print unknown instruction as "unknown", rather than in hex.
3889 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3891 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3893 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3895 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3897 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3899 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3900 when necessary. From Ulrich Drepper
3901 <drepper@myware.rz.uni-karlsruhe.de>.
3903 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3905 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3906 sparc_num_opcodes. Update architecture enum values.
3907 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3908 (sparc_opcode_lookup_arch): New function.
3909 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3910 (sparc_opcodes): Add v9a shutdown insn.
3912 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3914 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3915 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3917 (print_insn_sparc64): Deleted.
3918 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3921 * sparc-opc.c (architecture_pname): Add v9a.
3923 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3925 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3926 incorrectly defined as 0x16 when it should be 0x15.
3927 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3928 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3929 excb (exception barrier) which is defined in the Alpha
3930 Architecture Handbook version 2.
3931 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3932 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3933 disassembled as or, for example.
3935 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3937 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3938 (_print_insn_mips): Change i from int to unsigned int.
3940 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3942 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3943 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3945 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3947 * i386-dis.c: Added Pentium Pro instructions.
3949 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3951 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3954 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3956 * sh-opc.h (sh_nibble_type): Added REG_B.
3957 (sh_arg_type): Added A_REG_B.
3958 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3960 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3962 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3964 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3966 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3968 * Makefile.in (distclean): Remove stamp-h. From Ronald
3969 F. Guilmette <rfg@monkeys.com>.
3971 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3973 From David Mosberger-Tang <davidm@azstarnet.com>:
3974 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3977 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3979 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3980 (sh_table): Added many SH3 opcodes.
3981 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3983 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3985 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3986 (subco,subco.): Mark this PPC, not PPCCOM.
3988 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3990 * configure: Rebuild with autoconf 2.7.
3992 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3994 * configure: Rebuild with autoconf 2.6.
3996 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3998 * configure.in: Sort list of architectures. Accept but do nothing
3999 for alliant, convex, pyramid, romp, and tahoe.
4001 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4003 * a29k-dis.c (print_special): Change num to unsigned int.
4005 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4007 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4010 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4012 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4013 * configure: Rebuilt.
4015 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4017 * configure.in: Add case for bfd_i860_arch.
4018 * configure: Rebuild.
4020 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4022 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4023 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4024 (NEXTDOUBLE): Likewise.
4025 (print_insn_m68k): Don't match fmoveml if there is more than one
4026 register in the list.
4027 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4029 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4031 * m68k-opc.c: Use #W rather than #w.
4032 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4034 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4036 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4037 and likewise for all the dbxx opcodes.
4039 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4041 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4043 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4045 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4046 the VR4100 specific instructions to the mips_opcodes structure.
4048 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4050 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4051 ugly Metrowerks bug in CW6, is fixed in CW7.
4053 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4055 * ppc-opc.c (whole file): Add flags for common/any support.
4057 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4059 * Makefile.in (BISON): Remove macro.
4060 (FLAGS_TO_PASS): Remove BISON.
4062 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4064 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4066 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4067 instructions that take no args by looking at the match mask.
4068 (print_insn_arg): Always print "%" before register names.
4069 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4070 [case '_']: Don't print "@#" before address.
4071 [case 'J']: Use "%s" as format string, not register name.
4072 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4074 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4076 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4079 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4081 From David Mosberger-Tang <davidm@azstarnet.com>
4083 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4084 (alpha_insn_set): added definitions for VAX floating point
4085 instructions (Unix compilers don't generate these, but handcoded
4086 assembly might still use them).
4088 * alpha-dis.c (print_insn_alpha): added support for disassembling
4089 the miscellaneous instructions in the Alpha instruction set.
4091 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4093 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4094 no longer create sysdep.h, sed ppc-opc.c to work around a
4095 serious Metrowerks C bug.
4096 * mpw-make.in: Remove.
4097 * mpw-make.sed: New file, used by mpw-configure to edit
4098 Makefile.in into an MPW makefile.
4100 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * Makefile.in (maintainer-clean): New synonym for realclean.
4104 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4106 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4107 which use '0', '1', and '2' instead. Specify the proper size for
4108 a pmove immediate operand. Correct the pmovefd patterns to be
4109 moves to a register, not from a register.
4110 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4112 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4114 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4115 %psr, %wim, %tbr as F_NOTV9.
4117 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4119 * Makefile.in (Makefile): Just rebuild Makefile when running
4121 (config.h, stamp-h): New targets.
4122 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4123 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4124 rebuilding config.h.
4125 * configure: Rebuild.
4127 * mips-opc.c: Change unaligned loads and stores with "t,A"
4128 operands to use "t,A(b)".
4130 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4132 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4134 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4136 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4137 until 3 instead of until 2.
4139 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4141 * Makefile.in (ALL_CFLAGS): Define.
4142 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4143 (MOSTLYCLEAN): Add config.log.
4144 (distclean): Don't remove config.log.
4145 * configure.in: Substitute HDEFINES.
4146 * configure: Rebuild.
4148 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4150 * sh-opc.h (sh_arg_type): Add F_FR0.
4151 (sh_table, case fmac): Add F_FR0 as first argument.
4153 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4155 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4157 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4159 * sparc-dis.c: Remove all references to NO_V9.
4161 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4163 * aclocal.m4: Just include ../bfd/aclocal.m4.
4164 * configure: Rebuild.
4166 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4168 * sparc-dis.c (X_DISP19): Define.
4169 (print_insn, case 'G'): Use it.
4170 (print_insn, case 'L'): Sign extend displacement.
4172 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4174 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4175 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4176 host_makefile_frag or frags.
4177 * aclocal.m4: New file.
4178 * configure: Rebuild.
4179 * Makefile.in (INSTALL): Set to @INSTALL@.
4180 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4181 (INSTALL_DATA): Set to @INSTALL_DATA@.
4183 (AR_FLAGS): Set to rc rather than qc.
4184 (CC): Define as @CC@.
4185 (CFLAGS): Set to @CFLAGS@.
4186 (@host_makefile_frag@): Remove.
4187 (config.status): Remove dependency upon @frags@.
4189 * configure.in: ../bfd/config.bfd now just sets shell variables.
4190 Use them rather than looking through target Makefile fragments.
4191 * configure: Rebuild.
4193 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4195 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4197 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4199 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4200 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4203 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4204 (lookup_{name,value}): New functions.
4205 (prefetch_table): New static local.
4206 (sparc_{encode,decode}_prefetch): New functions.
4207 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4209 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4211 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4214 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4216 * sh-dis.c: Correct comment on first line of file.
4218 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4220 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4222 * sparc-opc.c (asi, membar): New static locals.
4223 (sparc_{encode,decode}_{asi,membar}): New functions.
4224 (sparc_opcodes, membar insn): Fix.
4225 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4226 Support decoding of membar masks.
4229 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4231 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4233 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4235 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4236 and likewise for the other branches. Add bhs as an alias for bcc,
4237 and likewise for the size variants. Add dbhs as an alias for
4240 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4242 * sh-opc.h (FP sts instructions): Update to match reality.
4244 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4246 * m68k-dis.c: (fpcr_names): Add % before all register names.
4247 (reg_names): Likewise.
4248 (print_insn_arg): Don't explicitly print % before register names.
4249 Add % before register names in static array names. In case 'r',
4250 print data registers as `@(Dn)', not `Dn@'. When printing a
4251 memory address, don't print @# before it.
4252 (print_indexed): Change base_disp and outer_disp from int to
4253 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4254 syntax. Sign extend 8 byte displacement correctly.
4255 (print_base): Print using MIT syntax. Print zpc when appropriate.
4256 Change parameter disp from int to bfd_vma.
4258 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4261 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4263 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4264 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4265 * sh-opc.h (sh_arg_type): Add new operand types.
4266 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4268 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4270 * Makefile.in (distclean): Remove generated file config.h.
4272 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4274 * Makefile.in (distclean): Remove generated file config.h.
4276 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4278 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4280 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4282 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4283 rather than numopcodes. Use m68k_opcodes rather than removed
4284 opcode function. Don't check F_ALIAS.
4285 (print_insn_arg): Change first parameter to be const char *.
4286 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4287 (m68k-opc.o): New target.
4288 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4289 * configure: Rebuild.
4291 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4293 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4294 (opcode_bits, opcode_hash_table): New variables.
4295 (opcodes_initialized): Renamed from opcodes_sorted.
4296 (build_hash_table): New function.
4297 (is_delayed_branch): Use hash table.
4298 (print_insn): Renamed from print_insn_sparc, made static.
4299 Build and use hash table. If !sparc64, ignore sparc64 insns,
4300 and vice-versa if sparc64.
4301 (print_insn_sparc, print_insn_sparc64): New functions.
4302 (compare_opcodes): Move sparc64 opcodes to end.
4303 Print commutative insns with constant second.
4304 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4306 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4308 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4309 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4310 avoids printing a delay slot in a delay slot.
4311 * sh-opc.h (sh_table): Fully bracket last entry.
4313 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4315 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4317 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4319 * configure.in: Get host_makefile_frag from ${srcdir}.
4321 * configure.in: Autoconfiscated. Check for string[s].h. Create
4322 config.h from config.in. Don't set up sysdep.h link.
4323 * sysdep.h: New file.
4324 * configure, config.in: New files, generated from configure.in.
4325 * Makefile.in: Updated to be processed autoconf-style.
4326 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4327 (Makefile): Depend on config.status.
4328 (config.status): New rule.
4329 * configure.bat: Update Makefile substitutions.
4331 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4333 * mips-opc.c (L1): Define.
4334 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4335 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4338 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4340 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4341 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4342 have multiple add units but only a single logical unit.
4344 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4345 shifted by 18, without any insertion or extraction function.
4346 (insert_cr, extract_cr): Remove.
4348 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4350 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4353 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4355 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4356 * sh-opc.h: Add copyright.
4358 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4360 * Makefile.in (crunch-m68k): Delete extra target accidentally
4361 checked in a while ago.
4363 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4365 * sh-opc.h (sh_table): Add SH3 support.
4367 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4369 * sh-opc.h: Added bsrf and braf.
4371 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4373 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4374 bogus [ls]fm{ea,fd} patterns.
4376 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4377 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4378 initialize it from memory. Make function static.
4379 (print_insn_{big,little}_arm): New functions.
4380 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4381 the correct endianness.
4383 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4385 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4388 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4390 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4391 17th, so that it builds again using GCC as the compiler.
4393 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4395 * mips-dis.c (print_insn_little_mips): Cast return value from
4396 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4397 expects an unsigned long, and that might be fewer words of
4398 argument storage (e.g., if bfd_vma is long long on a 32-bit
4400 (print_insn_big_mips): Likewise with bfd_getb32 value.
4401 (_print_insn_mips): Now static.
4403 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4405 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4406 gcc memory hog problem with initializer is fixed.
4408 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4410 Merge in support for Mac MPW as a host.
4411 (Old change descriptions retained for informational value.)
4413 * mpw-config.in (archname): Compute from the config.
4414 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4416 * mpw-config.in (target_arch): Compute from canonical target.
4417 (m68k, mips, powerpc, sparc): Add architectures.
4418 * mpw-make.in (disassemble.c.o): Add.
4419 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4421 * mpw-config.in (BFD_MACHINES): Set to a default value.
4422 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4424 * mpw-make.in (CSEARCH): Add extra-include to search path.
4426 * mpw-config.in (varargs.h): Don't create.
4427 (sysdep.h): Create using forward-include.
4428 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4430 * mpw-config.in: New file, MPW version of configure.in.
4431 * mpw-make.in: New file, MPW version of Makefile.in.
4433 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4435 * alpha-dis.c (print_insn_alpha): Put empty statement after
4438 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4440 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4441 (low_sign_extend): Likewise.
4442 (get_field): Delete unused function.
4443 (set_field, deposit_14, deposit_21): Likewise.
4445 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4447 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4450 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4452 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4454 * alpha-opc.h (OSF_ASMCODE): define
4455 print pal-code names as defined in App C of the
4456 Alpha Architecture Reference Manual
4458 * alpha-dis.c: cleaned up output
4459 print stylized code forms as defined in App A.4.3 of the
4460 Alpha Architecture Reference Manual
4462 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4464 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4466 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4469 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4471 * m68k-dis.c (opcode): New function. Returns address of opcode
4472 table entry given index, even if the opcode table was split to
4473 work around gcc bugs.
4474 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4476 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4477 (reg_names): Now const.
4478 (print_insn_arg): Arrays cacheFieldName and names now const.
4479 (print_indexed): Array scales now const.
4481 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4483 * ppc-opc.c: Sort recently added instructions by minor opcode
4484 number within major opcode number.
4486 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4488 * hppa-dis.c: Include libhppa.h.
4490 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4492 * mips-opc.c: Change dli to use M_DLI, and add dla.
4494 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4496 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4498 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4500 * mips-opc.c: Add r4650 mul instruction.
4502 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4504 * mips-opc.c: Add uld and usd macros for unaligned double load and
4507 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4509 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4510 mfdcr, mtdcr, icbt, iccci.
4512 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4514 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4515 signed char fields to shorts, more portable.
4517 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4519 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4520 char fields as signed chars, since they may have negative values.
4522 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4524 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4525 (mycroft@netbsd.org).
4527 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4529 From "Logg, Ed" <elogg@ea.com>:
4530 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4531 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4534 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4536 * ppc-opc.c: Changes based on patch from David Edelsohn
4537 <edelsohn@mhpcc.edu>.
4538 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4541 (insert_tbr): New static function.
4542 (extract_tbr): New static function.
4543 (XFXFXM_MASK, XFXM): Define.
4544 (XSPRBAT_MASK, XSPRG_MASK): Define.
4545 (powerpc_opcodes): Add instructions to access special registers by
4546 name. Add mtcr and mftbu.
4548 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4550 * mips-opc.c (P3): Define.
4551 (mips_opcodes): Add mad and madu.
4553 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4555 * configure.in: Add W65 support.
4556 * disassemble.c: Likewise.
4557 * w65-opc.h, w65-dis.c: New files.
4559 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4561 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4564 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4566 * mips-opc.c: Add dli as a synonym for li.
4568 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4570 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4571 print something for reserved opcode values, even if it won't
4574 * mips-dis.c (_print_insn_mips): When initializing, shift right
4575 and mask, to avoid sign extension problems on the Alpha.
4577 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4580 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4582 * sh-opc.h (mov.l gbr): Get direction right.
4583 * sh-dis.c (print_insn_shx): New function.
4584 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4585 print opcodes with right byte order.
4587 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4589 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4590 to avoid conflicts with getopt.
4592 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4594 * hppa-dis.c (print_insn_hppa): Read the instruction using
4595 bfd_getb32, so that it works on a little endian or 64 bit host.
4596 Remove unused local variable op.
4598 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4600 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4601 addu does not work correctly if -mips3.
4603 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4605 * a29k-dis.c (print_special): Add special register names defined
4606 on 29030, 29040 and 29050.
4607 (print_insn): Handle new operand type 'I'.
4609 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4611 * Makefile.in (INSTALL): Use top level install.sh script.
4613 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4615 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4616 that it works on a little endian host.
4618 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4620 * configure.in: Use ${config_shell} when running config.bfd.
4622 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4624 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4626 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4628 * a29k-dis.c (print_insn): Print the opcode.
4630 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4632 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4634 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4636 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4638 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4640 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4641 which store a value into memory.
4643 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4645 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4646 * arm-dis.c, arm-opc.h: New files.
4648 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4650 * Makefile.in (ns32k-dis.o): Add dependency.
4651 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4652 string, not as array of chars.
4654 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4656 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4658 * sparc-opc.c: Added sparclite extended FP operations, and
4659 versions of v9 impdep* instructions permitting specification of
4662 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4664 * i960-dis.c (reg_names): Now const.
4665 (struct sparse_tabent): New type, copied from array type in mem
4667 (ctrl): Local static array ctrl_tab now const.
4668 (cobr): Local static array cobr_tab now const.
4669 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4670 static variable mem_tab no longer explicitly initialized. Changed
4671 mem_init to const array of struct sparse_tabent.
4672 (reg): Local static variable reg_tab no longer explicitly
4673 initialized. Changed reg_init to const array of struct
4675 (ea): Local static array scale_tab now const.
4677 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4680 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4682 * configure.bat: the disassember needs to be enabled for
4683 "objdump -d" to work in djgpp.
4685 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4687 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4688 (invalid_float): Enabled general version, doesn't require running
4689 on ns32k host. Changed to take char* argument, and test for
4690 explicitly specified sizes, instead of using sizeof() on host CPU
4692 (INVALID_FLOAT): Cast first argument.
4693 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4694 list_P032, list_M032): Now const.
4695 (optlist, list_search): Made appropriate arguments now point to
4697 (print_insn_arg): Changed static array of one-character-string
4698 pointers into a static const array of characters; fixed sprintf
4699 statement accordingly.
4701 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4703 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4704 from distribution. A ns32k-dis.c from a previous distribution has
4705 been brought up to date and supports the new interface.
4707 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4709 * configure.in: add bfd_ns32k_arch target support.
4711 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4712 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4714 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4716 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4719 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4721 * h8300-dis.c, mips-dis.c: Don't use true and false.
4723 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4725 * configure.in: Change --with-targets to --enable-targets.
4727 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4729 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4730 opcodes to the first instruction with that opcode, to speed
4731 disassembly of large files. From ralphc@pyramid.com (Ralph
4734 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4736 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4738 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4740 * configure.bat: update to latest makefile.in
4742 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4744 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4745 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4746 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4747 slot insn is in a delay slot.
4748 * z8k-opc.h: (resflg): Fix patterns.
4749 * h8500-opc.h Fix CR insn patterns.
4751 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4753 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4754 "cmpl" before POWER versions, so that gas -many uses them.
4756 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4758 * disassemble.c: New file.
4759 * Makefile.in (OFILES): Add disassemble.o.
4760 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4761 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4762 binutils/configure.in.
4764 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4765 opcode being examined.
4767 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4770 (insert_ral, insert_ram, insert_ras): New functions.
4771 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4772 RAS for store with update.
4774 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4776 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4777 (edelsohn@npac.syr.edu).
4779 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4781 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4784 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4786 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4788 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * ppc-opc.c (powerpc_operands): The signedp field has been
4791 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4792 instead. Add new operand SISIGNOPT.
4793 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4794 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4795 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4798 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4800 * i386-dis.c (struct private): Renamed to dis_private. `private'
4801 is a reserved word for dynix cc.
4803 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4805 * configure.in: Change error message to refer to bfd/config.bfd
4806 rather than bfd/configure.in.
4808 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4810 * ppc-opc.c: Define POWER2 as short alias flag.
4811 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4814 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4816 * i960-dis.c (print_insn_i960): Don't read a second word for
4817 opcodes 0, 1, 2 and 3.
4819 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4821 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4823 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4825 * m68881-ext.c: Removed; no longer used.
4826 * Makefile.in: Changed accordingly.
4828 * m68k-dis.c (ext_format_68881): Don't declare.
4829 (print_insn_m68k): If an instruction uses place 'i', it uses at
4830 least four fixed bytes.
4831 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4832 extended float, convert to double using floatformat_to_double, not
4833 ieee_extended_to_double, and fetch the data before converting it.
4835 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4837 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4838 davidj@ICSI.Berkeley.EDU (David Johnson).
4840 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4842 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4843 PowerPC uses bdnz[l][a].
4845 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4847 * dis-buf.c, i386-dis.c: Include sysdep.h.
4849 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4851 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4853 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4854 by Motorola PowerPC 601 with PPC_OPCODE_601.
4855 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4856 Disassemble Motorola PowerPC 601 instructions as well as normal
4857 PowerPC instructions.
4859 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4861 * i960-dis.c (reg, mem): Just use a static array instead of
4864 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4866 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4867 condition name index if this is for a negated condition.
4869 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4870 Floating point format for 'H' operand is backwards from normal
4871 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4872 operands (fmpyadd and fmpysub), handle bizarre register
4873 translation correctly for single precision format.
4875 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4876 or 'I' operands if the next format specifier is 'M' (fcmp
4877 condition completer).
4879 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4882 single number giving a bitmask for the MB and ME fields of an M
4883 form instruction. Change NB to accept 32, and turn it into 0;
4884 also turn 0 into 32 when disassembling. Seperated SH from NB.
4885 (insert_mbe, extract_mbe): New functions.
4886 (insert_nb, extract_nb): New functions.
4887 (SC_MASK): Mask out SA and LK bits.
4888 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4889 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4890 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4891 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4892 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4893 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4894 (powerpc_macros): Define table of macro definitions.
4895 (powerpc_num_macros): Define.
4897 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4898 if PPC_OPERAND_NEXT is set.
4900 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4902 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4903 char. Retrieve contents using bfd_getl32 instead of shifting.
4905 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4907 * ppc-opc.c: New file. Opcode table for PowerPC, including
4908 opcodes for POWER (RS/6000).
4909 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4910 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4911 (CFILES): Add ppc-dis.c.
4912 (ppc-dis.o, ppc-opc.o): New targets.
4913 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4915 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4917 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4918 No space before 'u', 'f', or 'N'.
4920 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4922 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4923 farther than we should.
4925 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4927 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4929 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4931 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4933 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4934 needs it, to prevent reading past the end of a section.
4936 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4938 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4939 Removed t,A case for la; always use t,A(b) case.
4941 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4943 From Ted Lemen <mellon@pepper.ncd.com>
4944 * mips-dis.c (print_insn_arg): Handle 'k'.
4945 * mips-opc.c: Make cache use k, not t.
4947 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4949 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4950 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4951 FLOAT_FORMAT_CODE to put out floating point register names.
4953 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4955 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4957 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4959 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4961 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4963 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4964 larger than 32. Moved dsxx32 variants first for disassembler.
4966 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4968 * z8kgen.c, z8k-opc.h: Add full lda information.
4970 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4972 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4973 movb instructions. Any necessary space will be emitted by
4974 the code to handle nullification completers.
4976 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4978 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4980 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4982 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4983 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4985 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4987 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4989 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4991 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4992 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4994 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4996 * m88k-dis.c (m88kdis): comment change. Remove space after
4998 (printop): handle new arg types DEC and XREG for m88110.
5000 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5002 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5003 type for absolute branch addresses. Delete special
5004 "ble" and "be" code in 'W' operand code.
5006 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5008 * mips-opc.c: Set hazard information correctly for branch
5009 likely instructions.
5011 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5013 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5014 info->fprintf_func for printing and info->print_address_func for
5017 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5019 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5021 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5023 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5024 Corrected second case of "b" for disassembler.
5026 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5028 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5029 to BFD swapping routines to correspond to BFD name changes.
5031 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5033 * mips-opc.c: Change div machine instruction to be z,s,t rather
5034 than s,t. Change div macro to be d,v,t rather than d,s,t.
5035 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5036 rem and remu which generates only the corresponding div
5037 instruction. This is for compatibility with the MIPS assembler,
5038 which only generates the simple machine instruction when an
5039 explicit destination of $0 is used.
5040 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5042 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5044 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5045 WR_31 hazard for bal, bgezal, bltzal.
5047 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5049 * hppa-dis.c (print_insn_hppa): Use print function
5050 from within the disassemble_info, not fprintf_filtered.
5052 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5054 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5055 Law, law@cs.utah.edu.)
5057 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5059 * mips-opc.c ("absu"): Removed.
5062 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5064 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5065 Changed hazard information to distinguish between memory load
5066 delays and coprocessor load delays.
5068 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5072 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5074 * configure.in: Don't pass cpu to config.bfd.
5076 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5078 * m88k-dis.c (m88kdis): Make class unsigned.
5080 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5082 * alpha-dis.c (print_insn_alpha): One branch format case was
5083 missing the instruction name.
5085 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5087 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5088 Add the arch-specific auxiliary files.
5089 (OFILES): Remove the arch-specific auxiliary files
5090 and use BFD_MACHINES instead of DIS_LIBS.
5091 * configure.in: Set BFD_MACHINES based on --with-targets option.
5093 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5095 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5098 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5100 * sparc-opc.c: Change CONST to const to deal with gcc
5101 -Dconst=__const -traditional.
5103 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5105 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5106 coprocessor instructions out of #if 0, and made them use new
5109 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5111 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5113 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5115 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5116 instruction, for use by the disassembler.
5118 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5119 hand-coded sign extensions that depended on 32-bit host ints.
5120 FIXME, we still depend on big-endian host bitfield ordering.
5121 (sparc_print_insn): Set the insn_info_valid field, and the
5122 other fields that describe the instruction being printed.
5124 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5126 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5127 `jmp' instead of just one of them.
5129 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5131 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5132 (fput_fp_reg_r): Renamed from fput_reg_r.
5133 (fput_fp_reg): New function.
5134 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5136 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5138 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5140 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5142 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5144 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5145 don't output a space.
5147 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5149 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5151 * mips-opc.c: New file, containing opcode table from
5152 ../include/opcode/mips.h.
5153 * Makefile.in: Add it.
5155 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5157 * m88k-dis.c: New file, moved in from gdb and changed to use the
5158 new dis-asm.h disassembler interface.
5159 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5160 (m88k-dis.o): New target.
5162 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5164 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5165 argument string const char * to correspond to opcode/mips.h.
5167 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5169 * mips-dis.c: Updated to account for name changes in new version
5171 * Makefile.in: Added header file dependencies.
5173 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5175 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5177 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5179 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5180 extend, rather than shifts.
5182 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5184 * Makefile.in: Undo 15 June change.
5186 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5188 * m68k-dis.c (print_insn_arg): Change return value to byte count
5190 * m68k-dis.c: Re-write to detect invalid operands before
5191 printing anything, so we can handle this the same way we
5192 handle invalid opcodes.
5194 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5196 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5198 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5200 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5203 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5205 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5207 * configure.in: Do make sysdep.h link.
5208 * Makefile.in: Search ../include. Don't search ../bfd.
5210 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5212 Changes from Jeff Law, law@cs.utah.edu:
5213 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5214 Do not print a space before the completers specified by
5217 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5219 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5220 defined, since gdb has been fixed.
5222 Changes from Jeff Law, law@cs.utah.edu:
5223 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5224 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5225 be a *disassemble_info, not a *FILE.
5226 * hppa-dis.c: Support 'd', '!', and 'a'.
5227 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5228 * hppa-dis.c: Delete cases which are no longer needed.
5230 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5232 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5234 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5236 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5239 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5241 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5242 * configure.in: No longer need to configure to get sysdep.h.
5244 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5246 * Patches from Jeffrey Law <law@cs.utah.edu>.
5247 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5248 templates for 1.1 FP computational instructions.
5250 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5252 * h8500-dis.c (print_insn_h8500): Address argument is type
5254 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5257 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5258 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5260 * sparc-dis.c (compare_opcodes): Move static declaration to
5263 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5265 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5266 instruction, remove unimp hack from 'l' argument.
5268 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5270 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5273 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5275 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5276 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5279 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5281 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5282 arrays of string pointers to 2-d arrays of chars, to save
5285 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5287 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5288 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5290 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5292 * hppa-dis.c: New file from Utah, adapted to new disassembler
5294 * Makefile.in: Include it.
5296 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5298 * sh-dis.c, sh-opc.h: New files.
5300 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5302 * alpha-dis.c, alpha-opc.h: New files.
5304 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5306 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5309 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5311 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5313 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5315 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5318 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5320 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5321 and double percent signs a few places.
5323 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5325 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5326 Use info->print_address_func not print_address.
5328 * dis-buf.c (generic_print_address): New function.
5330 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5332 * Makefile.in: Add sparc-dis.c.
5333 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5335 Add `add' instruction to the set that get checked
5336 for a preceding `sethi' in order to print an absolute address.
5337 * (print_insn): Disassembly prefers real instructions.
5338 (is_delayed_branch): Speed up.
5339 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5340 Still missing some float ops, and needs testing.
5341 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5342 F_ALIAS. Use printf, not fprintf, when not passing a file
5344 (compare_opcodes): Check that identical instructions have
5345 identical opcodes, complain otherwise.
5348 * Include reg_names.
5350 Use dis-asm.h/read_memory_func interface.
5352 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5354 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5355 deliberately return non-zero to setjmp from longjmp. Otherwise
5356 this code fails to compile.
5358 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5360 * m68k-dis.c: Fix prototype for fetch_arg().
5362 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5364 * dis-buf.c: New file, for new read_memory_func interface.
5365 Makefile.in (OFILES): Include it.
5366 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5367 Use new read_memory_func interface.
5369 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5371 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5372 * h8500-opc.h: Fix couple of opcodes.
5374 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5376 * Makefile.in: add dvi & installcheck targets
5378 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5380 * Makefile.in: Update for h8500-dis.c.
5382 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5384 * h8500-dis.c, h8500-opc.h: New files
5386 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5388 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5389 ../include/dis-asm.h.
5390 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5391 and ../gdb/m68k-pinsn.c).
5392 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5393 and ../gdb/i386-pinsn.c).
5394 * m68881-ext.c: New file. Moved definition of
5395 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5396 * Makefile.in: Adjust for new files.
5397 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5398 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5399 can be dis-assembled.
5401 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5403 * mips-dis.c (print_insn_arg): Now returns void.
5405 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5407 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5408 files that use the macros.
5410 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5412 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5413 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5414 (CFILES): Added mips-dis.c.
5416 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5418 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5419 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5421 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5423 * Makefile.in: Improve *clean rules.
5424 * configure.in: Allow a default host.
5426 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5428 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5429 files include other sysdep files
5431 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5433 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5435 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5437 * configure.in: For host support, use ../bfd/configure.host
5438 so it stays in sync with the ../bfd/hosts database.
5440 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5442 * configure.in: use cpu-vendor-os triple instead of nested cases
5444 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5446 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5447 *always* the wrong one.
5449 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5451 * z8kgen.c: added copyright info
5453 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5455 * z8k-dis.c (unparse_instr): prettier tabs
5456 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5458 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5460 * configure.in: Add ncr* configuration.
5461 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5462 picayune ANSI compilers happy.
5464 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5466 * configure.in (i386): Make i386 and i486 synonymous for now.
5467 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5469 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5471 * Makefile.in (install): Fix typo.
5473 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5475 * Makefile.in (make): Remove obsolete crud.
5476 (sparc-opc.o): Avoid Sun Make VPATH bug.
5478 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5480 * Makefile.in: since there are no SUBDIRS, remove rule and
5481 references of subdir_do.
5483 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5485 * Makefile.in (install): Get the library name right here too.
5486 Don't install bfd.h, since it's unrelated to this library. No
5487 subdirs to recurse into, either.
5488 (CFILES): The source file has a .c suffix, not .o.
5490 * sparc-opc.c: New file, moved from BFD.
5491 * Makefile.in (OFILES): Build it.
5493 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5495 * z8k-dis.c: fixed forward refferences of some declarations.
5497 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5499 * Makefile.in: get the name of the library right
5501 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5503 * z8k-dis.c: knows how to disassemble z8k stuff
5504 * z8k-opc.h: new file full of z8000 opcodes
5508 version-control: never