1 2000-02-24 Nick Clifton <nickc@cygnus.com>
3 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
4 (cgen_clear_signed_overflow_ok): New function.
5 (cgen_signed_overflow_ok_p): New function.
7 2000-02-23 Andrew Haley <aph@cygnus.com>
9 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
10 m32r-ibld.c,m32r-opc.h: Rebuild.
12 2000-02-23 Linas Vepstas <linas@linas.org>
14 * i370-dis.c, i370-opc.c: New.
16 * disassemble.c (ARCH_i370): Define.
17 (disassembler): Handle it.
19 * Makefile.am: Add support for Linux/IBM 370.
20 * configure.in: Likewise.
22 * Makefile.in: Regenerate.
23 * configure: Likewise.
25 2000-02-22 Chandra Chavva <cchavva@cygnus.com>
27 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
28 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
31 1999-12-30 Andrew Haley <aph@cygnus.com>
33 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
35 * mips-opc.c (G6): New define.
36 (mips_builtin_op): Add "move" definition for -gp32.
38 2000-02-22 Ian Lance Taylor <ian@zembu.com>
40 From Grant Erickson <gerickso@Brocade.COM>:
41 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
43 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
45 * dis-buf.c (buffer_read_memory): Change `length' param and all int
48 Thu Feb 17 00:18:12 2000 J"orn Rennecke <amylaar@cygnus.co.uk>
50 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
51 (print_insn_ppi): Likewise.
52 (print_insn_shx): Use info->mach to select appropriate insn set.
53 Add support for sh-dsp. Remove FD_REG_N support.
54 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
55 (sh_arg_type): Likewise. Remove FD_REG_N.
56 (sh_dsp_reg_nums): New enum.
57 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
58 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
59 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
60 (arch_sh3_dsp_up): Likewise.
61 (sh_opcode_info): New field: arch.
62 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
63 D_REG_N. Fill in arch field. Add sh-dsp insns.
65 2000-02-14 Fernando Nasser <fnasser@totem.to.cygnus.com>
67 * arm-dis.c: Change flavor name from atpcs-special to
68 special-atpcs to prevent name conflict in gdb.
69 (get_arm_regname_num_options, set_arm_regname_option,
70 get_arm_regnames): New functions. API to access the several
71 flavor of register names. Note: Used by gdb.
72 (print_insn_thumb): Use the register name entry from the currently
73 selected flavor for LR and PC.
75 2000-02-10 Nick Clifton <nickc@cygnus.com>
77 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
79 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
80 "mulsh.h" instructions.
81 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
83 (print_insn_mcore): Add support for little endian targets.
84 Add support for MULSH and OPSR classes.
86 2000-02-07 Nick Clifton <nickc@cygnus.com>
88 * arm-dis.c (parse_arm_diassembler_option): Rename again.
89 Previous delat did not take.
91 2000-02-03 Timothy Wall <twall@redhat.com>
93 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
94 to adjust target address bounds checking and calculate the
95 appropriate octet offset into data.
97 2000-01-27 Nick Clifton <nickc@redhat.com>
99 * arm-dis.c: (parse_disassembler_option): Rename to
100 parse_arm_disassembler_option and allow to be exported.
102 * disassemble.c (disassembler_usage): New function: Print out any
103 target specific disassembler options.
104 Call arm_disassembler_options() if the ARM architecture is being
107 * arm-dis.c (NUM_ELEM): Define this macro if not already
109 (arm_regname): New struct type for ARM register names.
110 (arm_toggle_regnames): Delete.
111 (parse_disassembler_option): Use register name structure.
112 (print_insn): New function: Combines duplicate code found in
113 print_insn_big_arm and print_insn_little_arm.
114 (print_insn_big_arm): Call print_insn.
115 (print_insn_little_arm): Call print_insn.
116 (print_arm_disassembler_options): Display list of supported,
117 ARM specific disassembler options.
119 2000-01-27 Thomas de Lellis <tdel@windriver.com>
121 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
122 ARM_STT_16BIT flag as Thumb code symbols.
124 * arm-dis.c (printf_insn_little_arm): Ditto.
126 2000-01-25 Thomas de Lellis <tdel@windriver.com>
128 * arm-dis.c (printf_insn_thumb): Prevent double dumping
129 of raw thumb instructions.
131 2000-01-20 Nick Clifton <nickc@cygnus.com>
133 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
135 2000-01-03 Nick Clifton <nickc@cygnus.com>
137 * arm-dis.c (streq): New macro.
139 (force_thumb): ew local variable.
140 (parse_disassembler_option): New function: Parse a single, ARM
141 specific disassembler command line switch.
142 (parse_disassembler_option): Call parse_disassembler_option to
143 parse individual command line switches.
144 (print_insn_big_arm): Check force_thumb.
145 (print_insn_little_arm): Check force_thumb.
147 1999-12-27 Alan Modra <alan@spri.levels.unisa.edu.au>
149 * i386-dis.c (grps[]): Correct GRP5 FF/3 from "call" to "lcall".
151 Wed Dec 1 03:34:53 1999 Jeffrey A Law (law@cygnus.com)
153 * m10300-opc.c, m10300-dis.c: Add am33 support.
155 Wed Nov 24 20:29:58 1999 Jeffrey A Law (law@cygnus.com)
157 * hppa-dis.c (unit_cond_names): Add PA2.0 unit condition names.
158 (print_insn_hppa): Handle 'B' operand.
160 1999-11-22 Nick Clifton <nickc@cygnus.com>
162 * d10v-opc.c: Fix pattern for "cpfg,f{0|1},c" instruction.
164 1999-11-18 Gavin Romig-Koch <gavin@cygnus.com>
166 * mips-opc.c (I5): New.
167 (abs.ps,add.ps,alnv.ps,c.COND.ps,cvt.s.pl,cvt.s.pu,cvt.ps.s
168 madd.ps,movf.ps,movt.ps,mul.ps,net.ps,nmadd.ps,nmsub.ps,
169 pll.ps,plu.ps,pul.ps,puu.ps,sub.ps,suxc1,luxc1): New.
171 Mon Nov 15 19:34:58 1999 Donald Lindsay <dlindsay@cygnus.com>
173 * arm-dis.c (print_insn_arm): Added general purpose 'X' format.
174 * arm-opc.h (print_insn_arm): Added comment documenting
175 the 'X' format just added to arm-dis.c.
177 1999-11-15 Gavin Romig-Koch <gavin@cygnus.com>
179 * mips-opc.c (la): Create a version that just uses addiu directly.
180 (dla): Expand to daddiu if possible.
182 1999-11-11 Nick Clifton <nickc@cygnus.com>
184 * mips-opc.c: Add ssnop pattern.
186 1999-11-01 Gavin Romig-Koch <gavin@cygnus.com>
188 * mips-dis.c (_print_insn_mips): Use OPCODE_IS_MEMBER.
190 1999-10-29 Nick Clifton <nickc@cygnus.com>
192 * d30v-opc.c (mvtacc): Use format SHORT_AR not SHORT_AA
193 (d30v_format_tab): Define the SHORT_AR format.
195 1999-10-28 Nick Clifton <nickc@cygnus.com>
197 * mcore-dis.c: Remove spurious code introduced in previous delta.
199 1999-10-27 Scott Bambrough <scottb@netwinder.org>
201 * arm-dis.c: Include sysdep.h to prevent compile time warnings.
203 1999-10-18 Michael Meissner <meissner@cygnus.com>
205 * alpha-opc.c (alpha_operands): Fill in missing initializer.
206 (alpha_num_operands): Convert to unsigned.
207 (alpha_num_opcodes): Ditto.
208 (insert_rba): Declare unused arguments ATTRIBUTE_UNUSED.
213 (extract_bdisp): Ditto.
214 (extract_jhint): Ditto.
215 (extract_ev6hwjhint): Ditto.
217 Sun Oct 10 01:48:01 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org>
219 * hppa-dis.c (print_insn_hppa): Add new codes 'cc', 'cd', 'cC',
222 * hppa-dis.c (print_insn_hppa): Removed unused args. Fix '?W'.
224 * hppa-dis.c (print_insn_hppa): Implement codes "?N", "?Q".
226 Thu Oct 7 00:12:43 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
228 * d10v-opc.c (d10v_operands): Add RESTRICTED_NUM3 flag for
229 rac/rachi instructions.
230 (d10v_opcodes): Added seven new instructions ld, ld2w, sac, sachi,
233 1999-10-04 Doug Evans <devans@casey.cygnus.com>
235 * fr30-asm.c,fr30-desc.h: Rebuild.
236 * m32r-asm.c,m32r-desc.c,m32r-desc.h: Rebuild. Add m32rx support.
237 * m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h,m32r-opinst.c: Ditto.
239 1999-09-29 Nick Clifton <nickc@cygnus.com>
241 * sh-opc.h: Fix bit patterns for several load and store
244 Thu Sep 23 08:27:20 1999 Jerry Quinn <jerry.quinn.adv91@alum.dartmouth.org
246 * hppa-dis.c (print_insn_hppa): Replace 'B', 'M', 'g' and 'l' with
247 cleaner code using completer prefixes. Add 'Y'.
249 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
251 * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
253 * hppa-dis.c (extract_22): New function.
255 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
257 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
259 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
261 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
263 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
265 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
267 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
269 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
271 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
273 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
275 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
277 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
280 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
282 * hppa-dis.c: (print_insn_hppa): Add missing break after
285 * hppa-dis.c: Finish constifying various completers, register
288 1999-09-14 Michael Meissner <meissner@cygnus.com>
290 * configure.in (Canonicalization of target names): Remove adding
291 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
292 generates $ac_config_sub with a ${CONFIG_SHELL} already.
293 * configure: Regenerate.
295 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
297 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
299 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
301 1999-09-07 Nick Clifton <nickc@cygnus.com>
303 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
304 names for the mulu and muls patterns.
306 1999-09-04 Steve Chamberlain <sac@pobox.com>
308 * pj-opc.c: New file.
309 * pj-dis.c: New file.
310 * disassemble.c (disassembler): Handle bfd_arch_pj.
311 * configure.in: Handle bfd_pj_arch.
312 * Makefile.am: Rebuild dependencies.
313 (CFILES): Add pj-dis.c and pj-opc.c.
314 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
315 * configure, Makefile.in: Rebuild.
317 1999-09-04 H.J. Lu <hjl@gnu.org>
319 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
321 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
323 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
325 1999-08-04 Doug Evans <devans@casey.cygnus.com>
327 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
328 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
329 * m32r-opinst.c: Rebuild.
331 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
333 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
334 register args by 'f'.
336 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
338 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
339 extract_10U_store): New.
340 (print_insn_hppa): Add new completers.
342 * hppa-dis.c (signed_unsigned_names,mix_half_names,
343 saturation_names): New.
344 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
346 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
348 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
350 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
351 to decide to print a space.
353 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
355 * i386-dis.c: Add AMD athlon instruction support.
357 1999-08-10 Ian Lance Taylor <ian@zembu.com>
359 From Wally Iimura <iimura@microunity.com>:
360 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
361 overflow at end of address space.
362 (generic_print_address): Use sprintf_vma.
364 1999-08-08 Ian Lance Taylor <ian@zembu.com>
366 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
367 MKDEP. Rebuild dependencies.
368 * Makefile.in: Rebuild.
370 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
372 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
373 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
374 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
375 (print_insn_hppa): Add 64 bit condition completers.
377 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
379 * hppa-dis.c (print_insn_hppa): Change condition args to use
382 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
384 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
387 1999-07-21 Ian Lance Taylor <ian@zembu.com>
390 * configure.bat: Remove; obsolete.
392 1999-07-11 Ian Lance Taylor <ian@zembu.com>
394 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
395 (generic_strcat_address): Add cast to avoid warning.
396 * i386-dis.c: Initialize all structure fields to avoid warnings.
397 Add ATTRIBUTE_UNUSED as appropriate.
399 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
401 * sparc-dis.c (print_insn_sparc): Differentiate between
402 addition and oring when guessing symbol for comment.
404 1999-07-05 Nick Clifton <nickc@cygnus.com>
406 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
409 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
411 * i386-dis.c: Mention intel mode specials in macro char comment.
413 1999-06-21 Ian Lance Taylor <ian@zembu.com>
415 * alpha-dis.c: Don't include <stdlib.h>.
416 * arm-dis.c: Include "sysdep.h".
417 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
419 * Makefile.am: Rebuild dependencies.
420 * Makefile.in: Rebuild.
422 1999-06-16 Nick Clifton <nickc@cygnus.com>
424 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
427 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
429 * arm-dis.c (arm_regnames): Turn into a pointer to a register
431 (arm_regnames_standard): New variable: Array of ARM register
432 names according to ARM instruction set nomenclature.
433 (arm_regnames_apcs): New variable: Array of ARM register names
434 according to ARM Procedure Call Standard.
435 (arm_regnames_raw): New variable: Array of ARM register names
436 using just 'r' and the register number.
437 (arm_toggle_regnames): New function: Toggle the chosen register set
439 (parse_disassembler_options): New function: Parse any target
440 disassembler command line options.
441 (print_insn_big_arm): Call parse_disassembler_options if any
443 (print_insn_little_arm): Call parse_disassembler_options if any
446 1999-06-13 Ian Lance Taylor <ian@zembu.com>
448 * i386-dis.c (FWAIT_OPCODE): Define.
449 (used_prefixes): New static variable.
450 (fetch_data): Don't print an error message if we have already
451 fetched some bytes successfully.
452 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
453 (prefix_name): New static function.
454 (print_insn_i386): If setjmp fails, indicating a data error, but
455 we have managed to fetch some bytes, print the first one as a
456 prefix or a .byte pseudo-op. If fwait is followed by a non
457 floating point instruction, print the first prefix. Set
458 used_prefixes when prefixes are used. If any prefixes were not
459 used after disassembling the instruction, print the first prefix
460 instead of printing the instruction.
461 (putop): Set used_prefixes when prefixes are used.
462 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
463 (OP_DIR, OP_SIMD_Suffix): Likewise.
465 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
467 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
468 Support signx %reg, clruw %reg.
470 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
472 * sparc-opc.c: Add aliases Solaris as supports.
474 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
476 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
477 * Makefile.in: Regenerated.
479 1999-06-03 Philip Blundell <philb@gnu.org>
481 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
482 when target is PC-relative.
484 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
486 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
489 * m68k-dis.c (fetch_arg): Add places `n', `o'.
491 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
492 Add mcf5206e to appropriate instructions.
493 Add alias for MAC, MSAC.
495 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
498 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
499 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
501 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
503 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
505 * i386-dis.c (Ed): Define.
506 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
508 (OP_rm): Rename to OP_Rd.
511 (putop): Add const to template and p.
512 (print_insn_x86): Delete.
513 (print_insn_i386): Merge old function print_insn_x86. Add const
515 (struct dis386): Add const to name.
516 (dis386_att, dis386_intel): Add const.
517 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
518 (names32, names16, names8, names_seg, index16): Add const.
519 (grps, prefix_user_table, float_reg): Add const.
520 (float_mem_att, float_mem_intel): Add const.
521 (oappend): Add const to s.
522 (OP_REG): Add const to s.
523 (ptr_reg): Add const to s.
524 (dofloat): Add const to dp.
525 (OP_C): Don't skip modrm, it's now done in OP_Rd.
528 (OP_Rd): Check for valid mod. Call Op_E to print.
529 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
530 (OP_MS): Check for valid mod. Call Op_EM to print.
531 (OP_3DNowSuffix): Set obufp and use oappend rather than
532 strcat. Call BadOp() for errors.
533 (OP_SIMD_Suffix): Likewise.
534 (BadOp): New function.
536 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
538 * i386-dis.c (dis386_intel): Remove macro chars, except for
539 jEcxz. Change cWtR and cRtd to cW and cR.
540 (dis386_twobyte_intel): Remove macro chars here too.
541 (putop): Handle R and W macros for intel mode.
543 * i386-dis.c (SIMD_Fixup): New function.
544 (dis386_twobyte_att): Use it on movlps and movhps, and change
545 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
546 (dis386_twobyte_intel): Same here.
548 * i386-dis.c (Av): Remove.
552 (OP_SIMD_Suffix): New function.
553 (OP_DIR): Remove dead code.
554 (eAX_reg..eDI_reg): Renumber.
555 (onebyte_has_modrm): Table numbering comments.
556 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
557 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
558 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
559 and handle SIMD cmp insns in OP_SIMD_Suffix.
560 (info->bytes_per_line): Bump from 5 to 6.
562 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
563 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
565 PIII SIMD support from Doug Ledford <dledford@redhat.com>
566 * i386-dis.c (XM, EX, None): Define.
567 (OP_XMM, OP_EX, OP_None): New functions.
568 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
569 (GRP14): Rename to GRPAMD.
570 (GRP*): Add USE_GROUPS flag.
572 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
573 (twobyte_has_modrm): Add SIMD entries.
574 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
575 (grps): Add SIMD insns.
576 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
577 oappend repz if uses_f3_prefix. Add code to handle new groups for
580 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
581 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
582 operand from Av to Jv.
584 1999-05-07 Nick Clifton <nickc@cygnus.com>
586 * mcore-dis.c (print_insn_mcore): Use .short to display
587 unidentified instructions, not .word.
589 1999-04-26 Tom Tromey <tromey@cygnus.com>
591 * aclocal.m4, configure: Updated for new version of libtool.
593 1999-04-14 Doug Evans <devans@casey.cygnus.com>
595 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
596 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
598 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
600 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
603 1999-04-10 Doug Evans <devans@casey.cygnus.com>
605 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
606 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
608 1999-04-06 Ian Lance Taylor <ian@zembu.com>
610 * opintl.h (LC_MESSAGES): Never define.
612 1999-04-04 Ian Lance Taylor <ian@zembu.com>
614 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
615 (separator_char, scale_char): Likewise.
616 (print_insn_x86): Likewise.
617 (print_insn_i386): Likewise. Add declaration.
619 1999-03-26 Doug Evans <devans@casey.cygnus.com>
621 * fr30-dis.c: Rebuild.
622 * m32r-dis.c: Rebuild.
624 1999-03-23 Ian Lance Taylor <ian@zembu.com>
626 * m68k-opc.c: Change compare instructions to use "@s" rather than
627 ";s" when used with an immediate operand.
629 1999-03-22 Doug Evans <devans@casey.cygnus.com>
631 * cgen-opc.c (cgen_set_cpu): Delete.
632 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
633 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
635 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
637 * po/opcodes.pot: Rebuild.
639 1999-03-16 Martin Hunt <hunt@cygnus.com>
641 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
643 1999-03-11 Doug Evans <devans@casey.cygnus.com>
645 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
646 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
647 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
648 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
649 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
650 * m32r-opinst.c: Rebuild.
652 1999-02-25 Doug Evans <devans@casey.cygnus.com>
654 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
655 (cgen_hw_lookup_by_num): Rewrite.
656 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
657 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
658 * m32r-opinst.c: Rebuild.
660 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
662 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
663 (insert_jhint): Fix insertion mask.
664 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
666 1999-02-10 Doug Evans <devans@casey.cygnus.com>
668 * Makefile.in: Rebuild.
670 1999-02-09 Doug Evans <devans@casey.cygnus.com>
672 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
673 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
674 * Makefile.am: Remove references to them.
675 (HFILES): Add fr30-desc.h,m32r-desc.h.
676 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
678 (ALL_MACHINES): Update.
679 * configure.in: Redo handling of cgen_files.
680 (bfd_i960_arch): Delete i960c-*.lo files.
681 * configure: Regenerate.
682 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
683 (hash_insn_array): Rewrite.
684 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
685 (hash_insn_array): Rewrite.
686 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
687 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
688 (cgen_lookup_get_insn_operands): Ditto.
689 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
690 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
691 * po/POTFILES.in: Rebuild.
692 * po/opcodes.pot: Rebuild.
694 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
696 * Makefile.am: Rebuild dependencies.
697 (HFILES): Add fr30-opc.h.
698 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
699 * Makefile.in: Rebuild.
701 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
702 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
704 * acconfig.h: Remove.
705 * configure: Rebuild with current autoconf/automake.
706 * aclocal.m4: Likewise.
707 * config.in: Likewise.
708 * Makefile.in: Likewise.
710 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
712 * m68k-opc.c: Correct move (not movew) to status word on 5200.
714 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
716 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
717 * i386-dis.c (x_mode): Define.
721 (dis386_twobyte): Remove.
722 (dis386_twobyte_att): New.
723 (dis386_twobyte_intel): New.
724 (print_insn_x86): Use new arrays.
726 (float_mem_intel): New.
727 (float_mem_att): New.
728 (dofloat): Use new float_mem arrays.
729 (print_insn_i386_att): New.
730 (print_insn_i386_intel): New.
731 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
732 (putop): Handle intel syntax.
733 (OP_indirE): Handle intel syntax.
734 (OP_E): Handle intel syntax.
735 (OP_I): Handle intel syntax.
736 (OP_sI): Handle intel syntax.
737 (OP_OFF): Handle intel syntax.
741 1999-01-27 Doug Evans <devans@casey.cygnus.com>
743 * fr30-opc.h,fr30-opc.c: Rebuild.
744 * i960c-opc.h,i960c-opc.c: Rebuild.
745 * m32r-opc.c: Rebuild.
747 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
749 * hppa-dis.c: revert HP merge changes until HP gives us
752 1999-01-19 Nick Clifton <nickc@cygnus.com>
754 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
755 offsets as well as symbloic address.
757 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
759 * hppa-dis.c: fix comments and some indentation.
761 1999-01-12 Doug Evans <devans@casey.cygnus.com>
763 * fr30-opc.c,i960c-opc.c: Regenerate.
765 1999-01-11 Doug Evans <devans@casey.cygnus.com>
767 * fr30-opc.c: Regenerate.
769 1999-01-06 Doug Evans <devans@casey.cygnus.com>
771 * m32r-dis.c: Regenerate.
773 1999-01-05 Doug Evans <devans@casey.cygnus.com>
775 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
776 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
777 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
779 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
781 * configure.in: Require autoconf 2.12.1 or higher.
783 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
785 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
787 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
789 * fr30-opc.c: Regenerated.
791 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
793 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
795 1998-12-15 Dave Brolley <brolley@cygnus.com>
797 * fr30-opc.c,fr30-opc.h: Regenerated.
799 1998-12-14 Dave Brolley <brolley@cygnus.com>
801 * fr30-opc.c,fr30-opc.h: Regenerated.
803 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
805 * fr30-opc.c,fr30-opc.h: Regenerated.
807 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
809 * m32r-opc.c: Regenerate.
811 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
813 * dis-buf.c (generic_strcat_address): reformat to GNU coding
814 conventions. change sprintf call to an sprintf_vma call.
816 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
818 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
820 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
822 The following changes were made by
823 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
824 David Taylor <taylor@texas.cygnus.com>, and
825 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
826 merge in changes by HP; HP did not create ChangeLog entries.
828 * dis-buf.c (generic_strcat_address): new function.
830 * hppa-dis.c: Changes to improve hppa disassembly.
831 Changed formatting in : reg_names, fp_reg_names,control_reg,
832 New variables : sign_extension_names, deposit_names, conversion_names
833 float_test_names, compare_cond_names_double, add_cond_names_double,
834 logical_cond_names_double, unit_cond_names_double,
835 branch_push_pop_names, saturation_names, shift_names, mix_names,
836 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
837 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
838 (fput_const): renamed as fput_hex_const
840 - use the macros fputs_filtered and
841 fput_decimal_const whenever possible; calls to sign_extend require
842 2 params -- add a missing second param of 0.
843 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
844 architecture version number of current machine. HP folks are
845 trying to handle situation where the target program was compiled
846 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
848 - added new cases : 'g', 'B', 'm'
849 - added cases specifically for PA 2.0
850 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
851 - calls to fput_const become calls to fput_hex_const
853 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
855 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
856 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
857 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
858 * Makefile.in: Rebuilt.
859 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
861 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
862 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
864 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
866 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
868 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
870 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
872 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
873 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
875 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
877 * fr30-opc.c: Regenerate.
879 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
881 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
883 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
885 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
887 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
889 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
891 1998-11-30 Doug Evans <devans@casey.cygnus.com>
893 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
894 CGEN_INSN_BASE_VALUE.
895 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
896 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
898 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
900 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
902 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
904 * fr30-asm.c,fr30-dis.c: Regenerated.
906 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
908 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
910 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
912 * fr30-opc.c: Regenerated.
914 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
916 * fr30-opc.c: Regenerated.
917 * fr30-opc.h: Regenerated.
918 * fr30-dis.c: Regenerated.
919 * fr30-asm.c: Regenerated.
921 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
923 * mips-opc.c (sync.p,sync.l): Swap insn values.
925 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
927 * fr30-opc.c: Regenerate.
929 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
931 * fr30-opc.c: Regenerated.
932 * fr30-opc.h: Regenerated.
934 1998-11-18 Doug Evans <devans@casey.cygnus.com>
936 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
937 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
939 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
941 * fr30-opc.c: Regenerated.
943 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
945 * fr30-opc.c: Regenerated.
946 * fr30-opc.h: Regenerated.
947 * fr30-dis.c: Regenerated.
948 * fr30-asm.c: Regenerated.
950 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
952 * po/opcodes.pot: Regenerated.
953 * fr30-opc.c: Regenerated.
954 * fr30-opc.h: Regenerated.
955 * fr30-dis.c: Regenerated.
956 * fr30-asm.c: Regenerated.
958 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
960 * disassemble.c (disassembler): Add support for FR30 target.
962 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
964 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
965 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
967 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
969 * po/opcodes.pot: Regenerate.
970 * po/POTFILES.in: Regenerate.
971 * fr30-opc.c: Regenerate.
972 * fr30-opc.h: Regenerate.
974 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
976 * m32r-asm.c: Regenerate.
978 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
980 * configure.in: Added case for bfd_fr30_arch.
981 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
982 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
983 (CLEANFILES): Added stamp-fr30.
985 * fr30-asm.c: New file.
986 * fr30-dis.c: New file.
987 * fr30-opc.c: New file.
988 * fr30-opc.h: New file.
989 * po/POTFILES.in: Regenerated
990 * po/opcodes.pot: Regenerated
992 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
994 * configure.in: detect cygwin* instead of cygwin32*
995 * configure: regenerate
997 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
999 * mips-opc.c (IS_M): Added.
1001 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
1003 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
1005 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
1007 * m32r-opc.h,m32r-opc.c: Regenerate.
1009 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1011 * i386-dis.c (OP_3DNowSuffix): New static function.
1014 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
1015 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
1016 (insn_codep): New static variable.
1017 (print_insn_x86): Init insn_codep after prefixes.
1018 (grps): Add GRP14 entries for prefetch, prefetchw.
1021 From Jeff B Epler <jepler@usgs.gov>
1022 * i386-dis.c (Suffix3DNow): New table.
1024 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
1026 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
1028 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
1030 * d10v-dis.c (print_operand): If num is nonzero, then
1031 add OPERAND_ACC1, not OPERAND_ACC0.
1033 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
1035 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
1038 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
1040 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
1043 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
1045 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
1047 1998-09-09 Michael Meissner <meissner@cygnus.com>
1049 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
1052 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
1054 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
1056 (print_insn_little_arm): Detect Thumb symbols in elf object
1059 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
1061 * alpha-dis.c (print_insn_alpha): Use the machine type to
1062 decide which PALcode set to include.
1064 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
1066 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
1068 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
1070 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
1071 MSUB and MSUBS instructions.
1073 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
1075 * ppc-opc.c (powerpc_operands): Omit parens around additions in
1076 operand name macros.
1078 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
1080 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
1081 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
1082 +, -, and d for ColdFire.
1084 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
1085 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
1086 (extract_mbe): Likewise.
1088 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
1090 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
1092 * m10300-opc.c: First cut at UDF instructions.
1094 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
1096 * m32r-opc.c: Regenerate (remove semantic descriptions).
1098 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
1100 * arm-dis.c (print_insn_big_arm): Fix indentation.
1101 (print_insn_little_arm): Likewise.
1103 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
1105 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
1107 (print_insn_little_arm): Likewise.
1109 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
1111 Move all global state data into opcode table struct, and treat
1112 opcode table as something that is "opened/closed".
1113 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
1114 (cgen_asm_init): Delete.
1115 (cgen_set_parse_operand_fn): New function.
1116 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
1117 (cgen_dis_init): Delete.
1118 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
1119 (cgen_current_{opcode_table_mach,endian}): Delete.
1120 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1122 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
1124 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
1127 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
1129 * m10300-opc.c: Add entries for "no_match_operands" field in
1132 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
1134 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
1136 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
1138 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1140 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1142 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
1144 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
1146 (OP_J): Remove unnecessary subtraction when 16-bit displacement
1147 will be masked later.
1149 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
1151 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
1153 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
1155 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
1157 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
1159 * m10300-dis.c: Only recognize instructions from the currently
1161 * m10300-opc.c: Add field indicating the particular variant of
1162 the mn10300 each instruction is available on.
1164 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
1166 * configure.in: For bfd_vax_arch, build vax-dis.lo.
1167 * Makefile.am: Rebuild dependencies.
1168 (CFILES): Add vax-dis.c.
1169 (ALL_MACHINES): Add vax-dis.lo.
1170 * aclocal.m4: Rebuild with current libtool.
1171 * configure, Makefile.in: Rebuild.
1173 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
1175 * vax-dis.c: New file, from work by Pauline Middelink
1176 <middelin@polyware.iaf.nl>.
1177 * disassemble.c (ARCH_vax): Define if ARCH_all.
1178 (disassembler): Add case for ARCH_vax.
1179 * makefile.vms: Support compilation on vms/vax.
1181 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
1183 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
1184 related to sign extension and the size of ints.
1186 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
1188 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
1189 instructions. Support (sp) addressing mode by expanding it into
1192 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
1194 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
1196 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
1198 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
1200 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
1202 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
1205 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
1207 * mips-dis.c (print_insn_little_mips): Previously, instruction
1208 printing references the symbol table to determine whether the
1209 instruction resides in a block regular instructions or mips16
1210 instructions. However, when the disassembler gets used in other
1211 environments where the symbol table is not present, we no longer
1212 rely in the symbol table, rather, use the low bit of the
1213 instructions address to guess. There should be no change for usage
1214 of the disassembler in host based programs, gdb, objdump.
1215 (print_insn_big_mips): ditto.
1216 (print_insn_mips): ditto
1218 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
1220 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
1222 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
1224 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
1226 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1228 * i386-dis.c (index16): Add '%' to register names. Use ','
1231 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1233 * i386-dis.c: Don't print opcode suffix when we can figure out the
1234 size (and gas can!) by register operands, or from the default
1236 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
1238 (dis386, dis386_twobyte, grps): Use new suffix macros.
1239 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
1240 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
1241 order of cmps operands to agree with Intel docs. Correct operand
1242 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
1243 agree with Intel docs.
1244 (print_insn_x86): Print orphan fwait before other prefixes.
1245 Return correct byte count for orphan fwait with prefixes. Don't
1246 print `bound' operands in reverse order.
1247 (ckprefix): Stop accumulating prefixes if we get fwait.
1248 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1250 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1252 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1253 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1255 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1257 Fix problems when bfd_vma is wider than long.
1258 * i386-dis.c: Make op_address and start_pc unsigned.
1259 (set_op): Make parameter unsigned.
1260 (print_insn_x86): Cast to bfd_vma when passing a value to
1262 * ns32k-dis.c (CORE_ADDR): Don't define.
1263 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1264 bfd_scan_vma to read back address.
1265 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1267 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1268 (NEXTULONG): New definition.
1269 (print_insn_m68k): Avoid overflow when computing third argument of
1271 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1272 Use disp instead of val to store offset values.
1273 (print_indexed): Use base_disp instead of word to store base
1274 displacement, to avoid overflow.
1275 * m10300-dis.c (disassemble): Cast value to long when computing
1276 pc-relative address, to get correct sign extension.
1278 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1280 * m32r-opc.c: Regenerate.
1282 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1284 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1285 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1287 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1289 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1291 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1293 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1295 (OP_DSreg): Rename from OP_DSSI.
1296 (OP_ESreg): Rename from OP_ESDI.
1297 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1299 (append_seg): Rename from append_prefix.
1300 (ptr_reg): New function.
1301 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1303 (PREFIX_ADDR): Rename from PREFIX_ADR.
1304 (float_reg): Add non-broken opcodes for people who don't want
1307 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1309 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1312 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1314 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1316 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1318 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1319 0; produce error message for shifts of size 32 (or 64 for 64-bit
1320 shifts), because the hardware doesn't support them.
1322 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1324 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1325 LONG_2, LONG_2b formats to use this new operand.
1327 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1329 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1331 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1333 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1334 endian data support.
1336 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1338 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1339 and SHORT_B3b formats to use Rb instead of Ra.
1341 Add FLAG_MUL16 to MUL2XH opcode.
1343 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1344 to existing 1.1.1 parallelisation prohibition procedure.
1346 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1348 * m32r-asm.c,m32r-dis.c: Regenerate.
1350 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1352 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1353 with a shift count of 0.
1355 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1357 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1358 (cgen_hw_lookup_by_num): New function.
1360 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1362 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1364 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1366 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1367 as big-endian on SPARClite.
1369 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1371 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1373 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1375 * po/Make-in (install-info): New target.
1377 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1379 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1380 * configure: Rebuild.
1382 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1384 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1385 variety of ISA2 instructions to set bottom ten bits of trap code.
1387 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1389 * Makefile.am (config.status): Add explicit target so that
1390 config.status depends upon bfd/configure.in.
1391 * Makefile.in: Rebuild.
1393 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1395 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1396 instructions to set bottom ten bits of break code.
1397 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1398 for above optional argument.
1400 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1402 * makefile.vms: Run dec c with /nodebug.
1404 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1406 * Makefile.in: Rebuilt.
1407 * Makefile.am: Regenerated dependencies with mkdep.
1409 * opintl.h (_): Define as dgettext.
1411 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1413 * cgen-asm.c: Internationalised.
1414 * m32r-asm.c: Internationalised.
1415 * m32r-dis.c: Internationalised.
1416 * m32r-opc.c: Internationalised.
1418 * aclocal.m4: Regenerated.
1419 * configure: Regenerated.
1420 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1421 * Makefile.in: Rebuild.
1422 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1423 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1425 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1427 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1429 * aclocal.m4, configure: Rebuild with current tools.
1431 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1433 * opintl.h: New file - contains internationalisation macros used
1434 by source files in this directory.
1435 * po/: New subdirectory - contains internationalisation files.
1436 * po/Make-in: New file - Makefile constructor.
1437 * po/POTFILES.in: New file - list of files in opcodes directory
1438 that should be scan for internationalisation macros.
1439 * po/opcodes.pot: New file - list of internationisation strings
1440 found in files mentioned in po/POTFILES.in.
1441 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1442 entry. Add intl directory to include paths.
1443 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1444 HAVE_STRCPY, HAVE_LC_MESSAGES
1445 * configure.in: Add rule to build Makefile in po subdirectory.
1446 * Makefile.in: Rebuilt.
1447 * aclocal.m4: Rebuilt.
1448 * config.in: Rebuilt.
1449 * configure: Rebuilt.
1450 * alpha-opc.c: Internationalised.
1451 * arc-dis.c: Internationalised.
1452 * arc-opc.c: Internationalised.
1453 * arm-dis.c: Internationalised.
1454 * cgen-asm.c: Internationalised.
1455 * d30v-dis.c: Internationalised.
1456 * dis-buf.c: Internationalised.
1457 * h8300-dis.c: Internationalised.
1458 * h8500-dis.c: Internationalised.
1459 * i386-dis.c: Internationalised.
1460 * m10200-dis.c: Internationalised.
1461 * m10300-dis.c: Internationalised.
1462 * m68k-dis.c: Internationalised.
1463 * m88k-dis.c: Internationalised.
1464 * mips-dis.c: Internationalised.
1465 * ns32k-dis.c: Internationalised.
1466 * opintl.h: Internationalised.
1467 * ppc-opc.c: Internationalised.
1468 * sparc-dis.c: Internationalised.
1469 * v850-dis.c: Internationalised.
1470 * v850-opc.c: Internationalised.
1472 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1474 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1475 (asm_hash_table_entries): New variable.
1476 (cgen_asm_init): Free asm_hash_table_entries.
1477 (hash_insn_array,hash_insn_list): New functions.
1478 (build_asm_hash_table): Use them. Hash macro insns as well.
1479 (cgen_asm_lookup_insn): Update.
1480 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1481 (dis_hash_table_entries): New variable.
1482 (cgen_dis_init): Free dis_hash_table_entries.
1483 (hash_insn_array,hash_insn_list): New functions.
1484 (build_dis_hash_table): Use them. Hash macro insns as well.
1485 (cgen_dis_lookup_insn): Update.
1486 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1487 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1488 (cgen_macro_insn_count): New function.
1489 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1491 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1493 * i386-dis.c (OP_DSSI): Print segment override.
1495 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1497 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1500 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1502 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1503 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1504 * configure.in: Define and substitute WIN32LDFLAGS and
1506 * aclocal.m4: Rebuild with new libtool.
1507 * configure, Makefile.in: Rebuild.
1509 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1511 * m32r-opc.c: Regenerate.
1513 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1515 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1516 before trying to copy it.
1517 * Makefile.in: Rebuild.
1519 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1521 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1523 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1525 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1526 from an arbitrary valid buffer instead of fetching them on demand
1528 (invalid_float): use bit_extract_simple() instead of bit_extract().
1530 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1532 From H.J. Lu <hjl@gnu.org>:
1533 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1536 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1538 * Branched binutils 2.9.
1540 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1542 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1543 disassembling last 4 bytes of a section.
1545 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1547 Fix some gcc -Wall warnings:
1548 * arc-dis.c (print_insn): Add casts to avoid warnings.
1549 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1550 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1551 * m10200-dis.c (disassemble): Likewise.
1552 * m10300-dis.c (disassemble): Likewise.
1553 * ns32k-dis.c (print_insn_ns32k): Likewise.
1554 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1555 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1556 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1557 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1558 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1559 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1560 * tic80-dis.c (print_one_instruction): Likewise.
1561 * w65-dis.c (print_operand): Likewise.
1562 * z8k-dis.c (fetch_data): Likewise.
1563 * a29k-dis.c: Add return type for find_byte_func_type.
1564 * arc-opc.c: Include <stdio.h>. Remove declarations of
1565 insert_multshift and extract_multshift.
1566 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1568 (extract_value): Fully parenthesize expression.
1569 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1570 * h8500-opc.h (h8500_table): Fully bracket initializer.
1571 * w65-opc.h (optable): Likewise.
1572 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1573 * i386-dis.c (OP_E): Initialize local variables.
1574 * m10200-dis.c (print_insn_mn10200): Likewise.
1575 * mips-dis.c (print_insn_mips16): Likewise.
1576 * sh-dis.c (print_insn_shx): Likewise.
1577 * v850-dis.c (print_insn_v850): Likewise.
1578 * ns32k-dis.c (print_insn_arg): Declare.
1579 (get_displacement, invalid_float): Declare.
1580 (list_search, sign_extend, flip_bytes): Declare return type.
1581 (get_displacement): Likewise.
1582 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1584 (print_insn_ns32k): Make i unsigned.
1585 (invalid_float): Make static. Declare type of val.
1586 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1587 on each for iteration.
1588 * tic30-dis.c (get_indirect_operand): Likewise.
1589 * z8k-dis.c (print_insn_z8001): Declare return type.
1590 (print_insn_z8002): Likewise.
1591 (unparse_instr): Fix sprintf format strings.
1593 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1595 * mips-opc.c: Add "sync.l" and "sync.p".
1597 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1599 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1600 default m68k variant to recognize.
1602 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1603 (ctrl, cobr, mem, ea): Likewise.
1604 (print_addr): Likewise. Remove cast.
1605 (ea): Cast argument of print_addr to bfd_vma.
1607 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1609 (cgen_parse_unsigned_integer): Likewise.
1610 (cgen_parse_address): Likewise.
1612 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1614 * i960-dis.c (ctrl): Add full braces to structure initialization.
1615 (cobr, mem, reg): Likewise.
1616 (ea): Correct parenthesization in expression.
1618 * cgen-asm.c: Include <ctype.h>.
1619 (build_asm_hash_table): Remove unused local variable i.
1620 (cgen_parse_keyword): Add casts to avoid warnings.
1622 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1623 symbol. Fix indentation.
1624 (print_insn_little_arm): Likewise.
1626 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1628 * configure.in: Use AM_DISABLE_SHARED.
1629 * aclocal.m4, configure: Rebuild with libtool 1.2.
1631 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1633 These patches are courtesy of Jonathan Walton and Tony Thompson
1634 (athompso@cambridge.arm.com).
1636 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1639 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1640 both the offset and the label closest to the destination.
1642 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1644 * m32r-opc.h: Regenerate.
1646 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1648 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1650 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1652 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1653 assume that info->symbols is non-empty.
1655 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1657 * alpha-opc.c (cvtqs) There is no such thing.
1658 (cvttq): Missing most of the /*d variants.
1660 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1662 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1663 delayed branches or jumps.
1665 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1667 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1669 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1670 * tic30-dis.c (print_branch): Likewise.
1672 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1674 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1675 saved_symbol code as it is no longer needed.
1677 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1679 * cgen-asm.c: Include symcat.h.
1680 * cgen-dis.c,cgen-opc.c: Ditto.
1681 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1683 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1685 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1687 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1689 * m32r-opc.[ch]: Regenerate.
1691 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1693 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1694 arguments. Don't perform validation here.
1695 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1697 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1699 * m32r-opc.c: Regenerate.
1701 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1703 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1704 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1706 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1708 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1710 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1712 * configure.in: Get the version number from BFD.
1713 * configure: Rebuild.
1715 From H.J. Lu <hjl@gnu.org>:
1716 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1717 * Makefile.in: Rebuild.
1719 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1721 * m32r-opc.c: Regenerate.
1722 * m32r-opc.h: Regenerate.
1724 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1726 * m32r-opc.c: Regenerate.
1728 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1730 Fix rac to accept only a0:
1731 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1732 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1733 Introduce OPERAND_GPR.
1734 * d10v-dis.c (print_operand): Likewise.
1736 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1738 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1739 (cgen_hw_lookup): Make result const.
1740 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1742 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1744 * configure, aclocal.m4: Rebuild with new libtool.
1746 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1748 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1749 instructions use a PC relative branch, not absolute.
1751 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1753 * configure.in: Set libtool_enable_shared rather than
1754 libtool_shared. Remove diversion hack.
1755 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1757 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1759 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1760 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1762 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1764 * tic30-dis.c: New file.
1765 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1766 * configure.in: Handle bfd_tic30_arch.
1767 * Makefile.am: Rebuild dependencies.
1768 (CFILES): Add tic30-dis.c
1769 (ALL_MACHINES): Add tic30-dis.lo.
1770 * configure, Makefile.in: Rebuild.
1772 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1774 * m32r-opc.h (HAVE_CPU_M32R): Define.
1776 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1778 * v850-opc.c (insertion routines): If both alignment and size is
1779 wrong then report this.
1781 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1783 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1784 Only recognize instructions for the current target_processor.
1786 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1788 * d10v-dis.c (PC_MASK): Correct value.
1789 (print_operand): If there's a reloc, don't calculate the
1790 address because they could be in different sections.
1792 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1794 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1795 instruction after the 4650's "mul" instruction; nobody's using the
1796 4010 these days. If object files someday indicate which processor
1797 variant they're intended for, we can do a better job at this.
1799 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1801 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1802 table provided entry size. Use CGEN_INSN_MNEMONIC.
1803 (cgen_parse_keyword): Rewrite.
1804 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1805 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1806 * cgen-opc.c: Clean up pass over `struct foo' usage.
1807 (cgen_keyword_lookup_value): Handle "" entry.
1808 (cgen_keyword_add): Likewise.
1810 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1812 * mips-opc.c: Add FP_D to s.d instruction flags.
1814 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1816 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1818 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1820 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1821 PC relative offset forms before the 15 bit forms. An assembler command
1822 line option now chooses the default.
1824 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1826 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1827 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1829 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1831 * configure: Only build libopcodes shared if --enable-shared's value
1832 was `yes', or was set to `*opcodes*'.
1833 * aclocal.m4: Likewise.
1834 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1835 original source of this bit of code. It's not clear what the best fix
1838 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1840 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1841 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1842 offset forms before the 15 bit forms, to default to the long forms.
1844 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1846 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1848 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1850 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1851 symbol if none is present.
1852 (print_insn_big_arm): Prevent examination of stored symbol if
1855 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1857 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1859 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1861 * disassemble.c: Remove disasm_symaddr() function.
1863 * arm-dis.c: Use info->symbol instead of info->flags to determine
1864 if disassmbly should be in Thumb or Arm mode.
1866 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1868 * arm-dis.c: Add support for disassembling Thumb opcodes.
1869 (print_insn_thumb): New function.
1871 * disassemble.c (disasm_symaddr): New function.
1873 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1874 (thumb_opcodes): Table of Thumb opcodes.
1876 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1878 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1880 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1881 and 'v' as operand types.
1883 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1885 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1886 <olivier.carmona@di.epfl.ch>.
1887 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1888 which has a two word opcode with a one word argument.
1890 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1892 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1893 unsigned, not signed.
1894 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1896 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1898 * d10v-dis.c (print_operand):
1899 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1901 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1903 * d10v-opc.c (OPERAND_FLAG): Split into:
1904 (OPERAND_FFLAG, OPERAND_CFLAG) .
1908 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1910 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1911 field for all INSN_MACRO's.
1912 * mips16-opc.c: same
1914 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1916 * mips-opc.c (sync,cache): These are 3900 insns.
1918 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1920 sh-opc.h (sh_table): Remove ftst/nan.
1922 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1924 * mips-opc.c (ffc, ffs): Fix mask.
1926 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1928 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1931 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1933 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1934 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1936 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1938 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1939 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1941 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1943 * v850-dis.c (disassemble): Replace // with /* ... */
1945 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1947 * sparc-opc.c: Add wr & rd for v9a asr's.
1948 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1949 (v9a_asr_reg_names): New variable.
1950 Patch from David Miller <davem@vger.rutgers.edu>.
1952 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1954 * sparc-opc.c (v9notv9a): New insn type.
1955 (IMPDEP): Move to the end to not conflict with edge8 et al.
1956 Patch from David Miller <davem@vger.rutgers.edu>.
1958 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1960 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1962 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1964 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1966 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1968 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1969 of disassemble_info structure to determine if an overlay address
1970 has a matching symbol in low memory.
1972 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1973 new symbol_at_address_func field in disassemble_info structure.
1975 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1977 * v850-opc.c (extract_d22): Use signed arithmatic.
1979 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1981 * mips-opc.c: Three op mult is not an ISA insn.
1983 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1985 * mips-opc.c: Fix formatting.
1987 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1989 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1990 than assuming that char is signed. Explicitly sign extend 16 bit
1991 values, rather than assuming that short is 16 bits.
1992 (OP_sI, OP_J, OP_DIR): Likewise.
1994 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1996 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1999 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2001 * v850-opc.c: Fix typo in comment.
2003 * v850-dis.c (disassemble): Add test of processor type when
2004 determining opcodes.
2006 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2008 * configure.in: Use a diversion to set enable_shared before the
2009 arguments are parsed.
2010 * configure: Rebuild.
2012 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2014 * m68k-opc.c (TBL1): Use ! rather than `.
2015 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2017 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2019 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2021 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2023 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2026 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2027 * aclocal.m4: Rebuild with new libtool.
2028 * configure: Rebuild.
2030 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2032 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2034 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2036 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2038 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2040 * v850-opc.c (v850_opcodes): Further rearrangements.
2042 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2044 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2046 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2048 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2051 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2053 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2055 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2057 * v850-opc.c: Initialise processors field of v850_opcode structure.
2059 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2061 Merge changes from Martin Hunt:
2063 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2065 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2066 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2067 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2069 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2071 * d30v-dis.c (print_insn): First operand of d*i (delayed
2072 branch) instructions is relative.
2074 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2075 (d30v_operand_table): Add IMM6S3 type.
2076 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2078 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2079 and cmp instructions.
2081 * d30v-opc.c: Correct entries for repeat*, and sat*.
2082 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2083 types. Correct several formats.
2085 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2087 * d30v-opc.c (pre_defined_registers): Change control registers.
2089 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2090 SHORT_C2. Manual was incorrect.
2092 * d30v-dis.c (lookup_opcode): Return value now indicates
2093 if an opcode has a short and a long form. Used for deciding
2094 to append a ".s" or ".l".
2095 (print_insn): Append a ".s" to an instruction if it is
2096 the short form and ".l" if it is a long form. Do not append
2097 anything if the instruction has only one possible size.
2099 * d30v-opc.c: Change mulx2h to require an even register.
2100 New form: SHORT_A2; a SHORT_A form that needs an even
2101 register as the first operand.
2103 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2104 instruction was not being disassembled if there were an odd
2105 number of instructions.
2107 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2109 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2111 * v850-dis.c (disassemble): Improved display of register lists.
2113 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2115 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2116 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2117 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2118 fandnot1s, fandnot2s.
2120 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2122 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2124 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2126 * cgen-asm.c (cgen_parse_address): New argument resultp.
2127 All callers updated.
2128 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2130 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2132 * mn10200-dis.c (disassemble): PC relative instructions are
2133 relative to the next instruction, not the current instruction.
2135 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2137 * v850-dis.c (disassemble): Only signed extend values that are not
2138 returned by extract functions.
2139 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2141 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2143 * v850-opc.c: Update comments. Remove use of
2144 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2146 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2148 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2150 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2152 * configure: Rebuilt with latest devo autoconf for NT support.
2154 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2156 * v850-dis.c (disassemble): Use curly brace syntax for register
2159 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2160 where r0 is being used as a destination register.
2162 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2164 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2166 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2168 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2170 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2172 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2173 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2176 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2178 * configure (cgen_files): Add support for v850e target.
2179 * configure.in (cgen_files): Add support for v850e target.
2181 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2183 * configure (cgen_files): Add support for v850ea target.
2184 * configure.in (cgen_files): Add support for v850ea target.
2186 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2188 * configure.in (bfd_arc_arch): Add.
2189 * configure: Rebuild.
2190 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2191 * Makefile.in: Rebuild.
2192 * arc-dis.c, arc-opc.c: New files.
2193 * disassemble.c (ARCH_all): Define ARCH_arc.
2194 (disassembler): Add ARC support.
2196 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2198 * v850-dis.c (disassemble): Add support for v850EA instructions.
2200 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2201 (v850_opcodes): Add v850EA instructions.
2203 * v850-dis.c (disassemble): Add support for v850E instructions.
2205 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2206 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2207 insert_spe, extract_spe): New Functions.
2208 (v850_opcodes): Add v850E instructions.
2210 * v850-opc.c: Reorganised and re-layed out to improve readability
2213 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2215 * configure: Rebuild with autoconf 2.12.1.
2217 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2219 * aclocal.m4, configure: Rebuild with new automake patches.
2221 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2223 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2224 * acinclude.m4: Just include acinclude.m4 from BFD.
2225 * aclocal.m4, configure: Rebuild.
2227 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2229 * Makefile.am: New file, based on old Makefile.in.
2230 * acconfig.h: New file.
2231 * acinclude.m4: New file.
2232 * stamp-h.in: New file.
2233 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2234 Removed shared library handling; now handled by libtool. Replace
2235 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2236 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2237 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2238 handling in AC_OUTPUT.
2239 * dep-in.sed: Change .o to .lo.
2240 * Makefile.in: Now built with automake.
2241 * aclocal.m4: Now built with aclocal.
2242 * config.in, configure: Rebuild.
2244 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2246 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2248 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2250 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2252 * sparc-dis.c (sorted_opcodes): New static local.
2253 (struct opcode_hash): `opcode' is pointer to const element.
2254 (build_hash): First arg is now table of sorted pointers.
2255 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2256 (compare_opcodes): Update.
2258 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2260 * cgen-opc.c: #include <ctype.h>.
2261 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2262 Handle case insensitive hashing.
2263 (hash_keyword_value): Change type of `value' to unsigned int.
2265 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2267 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2268 precision FP, mark it as such. Likewise for double precision
2269 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2272 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2274 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2276 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2277 nesting depth when all the macros are expanded.
2279 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2281 * sparc-opc.c: The fcmp v9a instructions take an integer register
2282 as a destination, not a floating point register. From Christian
2283 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2285 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2287 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2288 syntax. From Roman Hodek
2289 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2291 * i386-dis.c (twobyte_has_modrm): Fix pand.
2293 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2295 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2297 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2299 * arm-dis.c: Add prototypes for arm_decode_shift and
2302 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2304 * mips-opc.c: Add r3900 insns.
2306 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2308 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2309 print delay slot instructions on the same line. When using a PC
2310 relative load, add a comment with the value being loaded if it can
2313 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2315 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2316 to pushS/popS for segment regs and byte constant so that
2317 pushw/popw printed when in 16 bit data mode.
2319 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2320 print cbtw, cwtd in 16 bit data mode.
2321 * i386-dis.c (putop): extra case W to support above.
2323 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2324 address size prefix in 16 bit address mode.
2326 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2328 * sh-dis.c: Reindent. Rename local variable fprintf to
2331 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2333 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2335 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2337 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2339 * mips16-opc.c (mip16_opcodes): same.
2341 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2343 * m68k-opc.c (moveb): Change $d to %d.
2345 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2347 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2348 (twobyte_has_modrm): Likewise.
2350 (OP_MMX, OP_EM, OP_MS): New static functions.
2352 * i386-dis.c: Revert patch of April 4. The output now matches
2355 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2357 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2360 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2362 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2364 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2366 * Makefile.in (install): Depend upon installdirs.
2367 (installdirs): New target.
2369 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2371 From Thomas Graichen <graichen@rzpd.de>:
2372 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2373 * configure: Rebuild.
2375 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2377 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2378 Delete string{,s}.h support.
2380 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2382 * cgen-asm.c (cgen_parse_operand_fn): New global.
2383 (cgen_parse_{{,un}signed_integer,address}): Update call to
2384 cgen_parse_operand_fn.
2385 (cgen_init_parse_operand): New function.
2386 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2387 from cgen_asm_init_parse.
2388 (m32r_cgen_assemble_insn): New operand `errmsg'.
2389 Delete call to as_bad, return error message to caller.
2390 (m32r_cgen_asm_hash_keywords): #if 0 out.
2392 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2394 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2396 [case 'J']: Fix typo in register name.
2398 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2400 * configure.in: Substitute SHLIB_LIBS.
2401 * configure: Rebuild.
2402 * Makefile.in (SHLIB_LIBS): New variable.
2403 ($(SHLIB)): Use $(SHLIB_LIBS).
2405 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2407 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2409 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2411 * disassemble.c (disassembler): Handle m32r.
2413 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2415 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2416 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2417 * Makefile.in (CFILES): Add them.
2418 (ALL_MACHINES): Add them.
2419 (dependencies): Regenerate.
2420 * configure.in (cgen_files): New variable.
2421 (bfd_m32r_arch): Add entry.
2422 * configure: Regenerate.
2424 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2426 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2427 * configure: Rebuild.
2429 * Makefile.in: Rebuild dependencies.
2431 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2433 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2436 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2438 * Branched binutils 2.8.
2440 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2442 * m10200-dis.c: Rename from mn10200-dis.c.
2443 * m10200-opc.c: Rename from mn10200-opc.c.
2444 * m10300-dis.c: Rename from mn10300-dis.c
2445 * m10300-opc.c: Rename from mn10300-opc.c.
2446 * Makefile.in: Update accordingly.
2448 * mips16-opc.c: Add mul and dmul macros.
2450 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2452 * makefile.vms: Update CFLAGS, add clean target.
2454 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2456 * mips-opc.c: Add "wait". From Ralf Baechle
2457 <ralf@gnu.ai.mit.edu>.
2459 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2460 * configure, config.in: Rebuild.
2461 * sysdep.h: Include <stdlib.h> if it exists.
2462 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2464 * Makefile.in: Rebuild dependencies.
2466 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2468 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2469 Andrew Bray <andy@madhouse.demon.co.uk>.
2471 * mips-opc.c: Add cast when setting mips_opcodes.
2473 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2475 * v850-dis.c (disassemble): Fix sign extension problem.
2476 * v850-opc.c (extract_d*): Fix sign extension problems to make
2477 disassembly calculate branch offsets correctly.
2479 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2481 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2483 * mips-opc.c: Add dctr and dctw.
2485 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2487 * d30v-dis.c (print_insn): Change the way signed constants
2490 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2492 * Makefile.in (BFD_H): New variable.
2493 (HFILES): New variable.
2494 (CFILES): Add all C files.
2495 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2496 Delete old dependencies, and build new ones.
2497 * dep-in.sed: New file.
2499 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2501 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2503 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2505 * mn10200-opc.c: Change "trap" to "syscall".
2506 * mn10300-opc.c: Add new "syscall" instruction.
2508 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2510 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2511 mulul insns on the coldfire.
2513 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2515 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2516 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2517 (print_insn_little_arm): Likewise.
2519 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2521 Based on patches from H.J. Lu <hjl@lucon.org>:
2522 * i386-dis.c (fetch_data): Add prototype.
2523 * m68k-dis.c (fetch_data): Add prototype.
2524 (dummy_print_address): Add prototype. Make static.
2525 * ppc-opc.c (valid_bo): Add prototype.
2526 * sparc-dis.c (build_hash_table): Add prototype.
2527 (is_delayed_branch, compute_arch_mask): Add prototypes.
2528 (print_insn_sparc): Make several local variables const.
2529 (compare_opcodes): Change arguments to const PTR. Add prototype.
2530 * sparc-opc.c (arg): Change name field to be const.
2531 (lookup_name, lookup_value): Add prototypes. Change table and
2532 name parameters to be const.
2533 (sparc_encode_asi): Change name parameter to be const.
2534 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2535 (sparc_encode_sparclet_cpreg): Likewise.
2536 (sparc_decode_asi): Change return type to be const.
2537 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2538 (sparc_decode_sparclet_cpreg): Likewise.
2540 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2542 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2543 Solaris doesn't like the combined options, and the -f is
2545 (stamp-tshlink, install): Likewise.
2547 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2549 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2552 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2554 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2556 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2558 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2561 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2563 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2565 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2567 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2569 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2571 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2573 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2575 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2576 floatformat_to_double to make portable.
2577 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2580 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2582 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2583 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2585 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2587 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2588 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2590 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2592 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2593 (OFF_SL_BR_SCALED): ... to this, and added the flag
2594 TIC80_OPERAND_BASEREL to the flags word.
2595 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2598 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2600 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2601 Change mips_opcodes from const array to a pointer,
2602 and change bfd_mips_num_opcodes from const int to int,
2603 so that we can increase the size of the mips opcodes table
2606 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2608 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2609 store BITNUM values in the table in one's complement form
2610 to match behavior when assembler is given a raw numeric
2611 value for a BITNUM operand.
2612 * tic80-dis.c (print_operand_bitnum): Ditto.
2614 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2616 * d30v-opc.c: Removed references to FLAG_X.
2618 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2620 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2622 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2624 * Makefile.in: Added d30v object files.
2625 * configure: (bfd_d30v_arch) Rebuilt.
2626 * configure.in: (bfd_d30v_arch) Added new case.
2627 * d30v-dis.c: New file.
2628 * d30v-opc.c: New file.
2629 * disassemble.c (disassembler) Add entry for d30v.
2631 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2633 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2634 representations for the floating point BITNUM values.
2636 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2638 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2639 in the table in one's complement form, as they appear in the
2641 (tic80_symbol_to_value): Use macros to access predefined
2643 (tic80_value_to_symbol): Ditto.
2644 (tic80_next_predefined_symbol): New function.
2645 * tic80-dis.c (print_operand_bitnum): Remove code that did
2646 one's complement for BITNUM values.
2648 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2650 * makefile.vms: Remove 8 bit characters. Update to latest
2653 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2655 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2657 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2659 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2660 (IMM24_PCREL): Likewise.
2662 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2664 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2665 address for an extended PC relative instruction that is not a
2668 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2670 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2673 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2675 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2676 (tic80_opcodes): Sort entries so that long immediate forms
2677 come after short immediate forms, making it easier for
2678 assembler to select the right one for a given operand.
2680 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2682 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2684 (print_insn_mips16): Likewise.
2686 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2688 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2689 a symbol class that restricts translation to just that
2690 class (general register, condition code, etc).
2692 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2694 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2695 and REG_DEST_E for register operands that have to be
2696 an even numbered register. Add REG_FPA for operands that
2697 are one of the floating point accumulator registers.
2698 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2699 (tic80_opcodes): Change entries that need even numbered
2700 register operands to use the new operand table entries.
2701 Add "or" entries that are identical to "or.tt" entries.
2703 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2705 * mips16-opc.c: Add new cases of exit instruction for
2707 * mips-dis.c (print_mips16_insn_arg): Display floating point
2708 registers in operands of exit instruction. Print `$' before
2709 register names in operands of entry and exit instructions.
2711 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2713 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2714 pairs for all predefined symbols recognized by the assembler.
2715 Also used by the disassembling routines.
2716 (tic80_symbol_to_value): New function.
2717 (tic80_value_to_symbol): New function.
2718 * tic80-dis.c (print_operand_control_register,
2719 print_operand_condition_code, print_operand_bitnum):
2720 Remove private tables and use tic80_value_to_symbol function.
2722 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2724 * d10v-dis.c (print_operand): Change address printing
2725 to correctly handle PC wrapping. Fixes PR11490.
2727 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2729 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2732 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2734 * mips-dis.c (print_insn_mips16): Set insn_info information.
2735 (print_mips16_insn_arg): Likewise.
2737 * mips-dis.c (print_insn_mips16): Better handling of an extend
2738 opcode followed by an instruction which can not be extended.
2740 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2742 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2743 coldfire moveb instruction to not allow an address register as
2744 destination. Although the documentation does not indicate that
2745 this is invalid, experiments uncovered unexpected behavior.
2746 Added a comment explaining the situation. Thanks to Andreas
2747 Schwab for pointing this out to me.
2749 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2751 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2752 entries are presorted so that entries with the same mnemonic are
2753 adjacent to each other in the table. Sort the entries for each
2754 instruction so that this is true.
2756 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2758 * m68k-dis.c: Include <libiberty.h>.
2759 (print_insn_m68k): Sort the opcode table on the most significant
2760 nibble of the opcode.
2762 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2764 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2765 "vsub", "vst", "xnor", and "xor" instructions.
2766 (V_a1): Renamed from V_a, msb of accumulator reg number.
2767 (V_a0): Add macro, lsb of accumulator reg number.
2769 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2771 * tic80-dis.c (print_insn_tic80): Broke excessively long
2772 function up into several smaller ones and arranged for
2773 the instruction printing function to be callable recursively
2774 to print vector instructions that have both a load and a
2775 math instruction packed into a single opcode.
2776 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2777 to explain why it comes after the other vector opcodes.
2779 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2781 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2782 move insns to handle immediate operands.
2784 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2786 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2787 fix operand mask in the "moveml" entries for the coldfire.
2789 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2791 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2792 New macros for building vector instruction opcodes.
2793 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2794 FMT_LI, which were unused. The field is now a flags field.
2795 Remove some opcodes that are possible, but illegal, such
2796 as long immediate instructions with doubles for immediate
2797 values. Add "vadd" and "vld" instructions.
2799 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2801 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2802 the order more logical. Move the shift alias instructions ("rotl",
2803 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2804 interspersed with the regular sr.x and sl.x instructions. Add
2805 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2806 "sub", "subu", "swcr", and "trap".
2808 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2810 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2811 (OFF_SL_PC): Renamed from OFF_SL.
2812 (OFF_SS_BR): New operand type for base relative operand.
2813 (OFF_SL_BR): New operand type for base relative operand.
2814 (REG_BASE): New operand type for base register operand.
2815 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2816 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2817 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2819 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2820 10 char field, padded with spaces on rhs, rather than a string
2821 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2822 than old TIC80_OPERAND_RELATIVE. Add support for new
2823 TIC80_OPERAND_BASEREL flag bit.
2825 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2827 * tic80-dis.c (print_insn_tic80): Print floating point operands
2829 * tic80-opc.c (SPFI): Add single precision floating point
2830 immediate operand type.
2831 (ROTATE): Add rotate operand type for shifts.
2832 (ENDMASK): Add for shifts.
2833 (n): Macro for the 'n' bit.
2834 (i): Macro for the 'i' bit.
2835 (PD): Macro for the 'PD' field.
2836 (P2): Macro for the 'P2' field.
2837 (P1): Macro for the 'P1' field.
2838 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2841 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2843 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2844 adding in current address for pc-relative operands.
2846 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2848 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2849 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2850 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2851 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2852 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2853 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2854 (REG_SCALED, LSI_SCALED): New operand types.
2855 (E): New macro for 'E' bit at bit 27.
2856 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2857 opcodes, including the various size flavors (b,h,w,d) for
2858 the direct load and store instructions.
2860 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2862 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2864 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2865 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2866 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2867 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2868 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2869 masks with "MASK_* & ~M_*" to get the M bit reset.
2870 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2872 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2874 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2875 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2876 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2878 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2879 CC, SICR, and LICR table entries.
2880 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2881 "bcnd", and "brcr" opcodes.
2883 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2885 * ppc-opc.c (powerpc_operands): Make comment match the
2886 actual fields (no shift field).
2887 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2888 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2889 partial implementation, work in progress.
2890 * tic80-opc.c (tic80_operands): Begin construction operands table.
2891 (tic80_opcodes): Continue populating opcodes table and start
2892 filling in the operand indices.
2893 (tic80_num_opcodes): Add this.
2895 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2897 * m68k-opc.c: Add #B case for moveq.
2899 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2901 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2902 before they are used.
2904 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2906 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2907 for "breakpoint" instruction.
2909 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2911 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2912 (dep): Use ALL_CFLAGS rather than CFLAGS.
2914 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2916 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2919 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2921 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2922 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2924 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2926 * mips16-opc.c: Add "abs".
2928 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2930 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2931 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2932 (disassembler): Add bfd_arch_tic80 support to set disassemble
2933 to print_insn_tic80.
2934 * tic80-dis.c (print_insn_tic80): Add stub.
2936 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2938 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2939 * configure: Regenerate with autoconf.
2940 * tic80-dis.c: Add file.
2941 * tic80-opc.c: Add file.
2943 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2945 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2947 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2949 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2950 (mn10200_opcodes): Use it for some logicals and btst insns.
2951 Add "break" and "trap" instructions.
2953 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2955 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2957 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2959 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2960 relative load or add now depends upon whether the instruction is
2963 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2965 * mn10200-dis.c: Finish writing disassembler.
2966 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2967 Fix mask for "jmp (an)".
2969 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2970 handle endianness issues for mn10300.
2972 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2974 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2976 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2977 instruction. Fix opcode field for "movb (imm24),dn".
2979 * mn10200-opc.c (mn10200_operands): Fix insertion position
2982 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2984 * mn10200-opc.c: Create mn10200 opcode table.
2985 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2986 but moving along nicely.
2988 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2990 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2992 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2994 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2995 specifiers for fmovem* instructions.
2997 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2999 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3001 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3003 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3006 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3008 * mn10300-opc.c: Add some comments explaining the various
3011 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3013 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3015 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3018 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3019 operand specifiers in fmovm* instructions.
3021 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3023 * ppc-opc.c (insert_li): Give an error if the offset has the two
3024 least significant bits set.
3026 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3028 * mips-dis.c (print_insn_mips16): Separate the instruction from
3029 the arguments with a tab, not a space.
3031 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3033 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3036 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3039 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3041 * configure: Rebuild with autoconf 2.12.
3043 Add support for mips16 (16 bit MIPS implementation):
3044 * mips16-opc.c: New file.
3045 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3046 (mips16_reg_names): New static array.
3047 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3048 after seeing a 16 bit symbol.
3049 (print_insn_little_mips): Likewise.
3050 (print_insn_mips16): New static function.
3051 (print_mips16_insn_arg): New static function.
3052 * mips-opc.c: Add jalx instruction.
3053 * Makefile.in (mips16-opc.o): New target.
3054 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3055 * configure: Rebuild.
3057 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3059 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3060 operand specifiers in *save, *restore and movem* instructions.
3062 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3065 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3066 register operands for immediate arithmetic, not, neg, negx, and
3067 set according to condition instructions.
3069 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3070 specifier of the effective-address operand in immediate forms of
3071 arithmetic instructions. The specifier for the immediate operand
3072 notes how and where the constant will be stored.
3074 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3076 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3079 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3082 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3084 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3086 * mn10300-dis.c (disassemble): Handle register lists.
3088 * mn10300-opc.c: Fix handling of register list operand for
3089 "call", "ret", and "rets" instructions.
3091 * mn10300-dis.c (disassemble): Print PC-relative and memory
3092 addresses symbolically if possible.
3093 * mn10300-opc.c: Distinguish between absolute memory addresses,
3094 pc-relative offsets & random immediates.
3096 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3098 (disassemble): Handle SPLIT and EXTENDED operands.
3100 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3102 * mn10300-dis.c: Rough cut at printing some operands.
3104 * mn10300-dis.c: Start working on disassembler support.
3105 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3107 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3109 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3111 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3113 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3115 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3117 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3118 register argument is calls and jmp instructions.
3120 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3122 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3123 getx operand. Fix opcode for mulqu imm,dn.
3125 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3127 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3128 in MN10300_OPERAND_SPLIT operands for how many bits
3129 appear in the basic insn word. Add IMM32_HIGH24,
3130 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3131 (mn10300_opcodes): Use new operands as needed.
3133 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3134 for bset, bclr, btst instructions.
3135 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3137 * mn10300-opc.c (mn10300_operands): Remove many redundant
3138 operands. Update opcode table as appropriate.
3139 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3140 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3142 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3144 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3145 operands (for indexed load/stores). Fix bitpos for DI
3146 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3147 few instructions that insert immediates/displacements in the
3148 middle of the instruction. Add IMM8E for 8 bit immediate in
3149 the extended part of an instruction.
3150 (mn10300_operands): Use new opcodes as appropriate.
3152 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3154 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3155 sequential so the assembler never parallelizes it with
3158 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3160 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3161 a data/address register that appears in register field 0
3162 and register field 1.
3163 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3165 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3167 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3168 standard disassembly.
3170 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3171 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3172 Recategorize PALcode instructions.
3174 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3176 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3178 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3180 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3181 there are no operand types.
3183 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3185 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3187 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3189 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3191 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3193 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3195 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3196 and sst.w instructions.
3198 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3201 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3203 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3206 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3208 * ppc-opc.c (PPCPWR2): Define.
3209 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3212 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3214 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3215 field for movhu instruction.
3217 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3218 cast value to "long" not "signed long" to keep hpux10
3221 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3223 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3226 * mn10300-opc.c (FMT*): Remove definitions.
3228 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3229 for shift-by-register opcodes.
3231 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3232 into [AD][MN][01] for encoding the position of the register
3235 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3237 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3238 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3240 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3242 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3243 Fix various typos. Add "PAREN" operand.
3244 (MEM, MEM2): Define.
3245 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3246 operands. Fix several typos.
3248 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3251 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3253 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3254 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3256 (mn10300_opcodes): Break opcode format out into its own field.
3257 Update many operand fields to deal with signed vs unsigned
3258 issues. Fix one or two typos in the "mov" instruction
3259 opcode, mask and/or operand fields.
3261 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3263 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3264 m68851 wasn't reset.
3266 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3268 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3269 all opcodes. Very rough cut at operands for all opcodes.
3271 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3274 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3276 * mn10200-opc.c, mn10300-opc.c: New files.
3277 * mn10200-dis.c, mn10300-dis.c: New files.
3278 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3279 * disassemble.c: Break mn10x00 support into 10200 and 10300
3281 * configure.in: Likewise.
3282 * configure: Rebuilt.
3284 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3286 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3288 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3290 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3292 * disassemble (ARCH_mn10x00): Define.
3293 (disassembler): Handle bfd_arch_mn10x00.
3294 * configure.in: Recognize bfd_mn10x00_arch.
3295 * configure: Rebuilt.
3297 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3299 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3300 accordingly. Don't declare functions using op_rtn.
3302 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3304 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3305 params to be more standard.
3306 * (disassemble): Print absolute addresses and symbolic names for
3307 branch and jump targets.
3308 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3310 * (v850_opcodes): Add breakpoint insn.
3312 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3314 * m68k-opc.c: Move the fmovemx data register cases before the
3315 other cases, so that they get recognized before the data register
3316 does gets treated as a degenerate register list.
3318 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3320 * mips-opc.c: Add a case for "div" and "divu" with two registers
3321 and a destination of $0.
3323 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3325 * mips-dis.c (print_insn_arg): Add prototype.
3326 (_print_insn_mips): Ditto.
3328 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3330 * mips-dis.c (print_insn_arg): Print condition code registers as
3333 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3335 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3337 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3339 * v850-dis.c (disassemble): Make static. Provide prototype.
3341 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3343 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3346 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3348 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3349 ']' characters into the output stream.
3350 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3351 Add "memop" field to all opcodes (for the disassembler).
3352 Reorder opcodes so that "nop" comes before "mov" and "jr"
3353 comes before "jarl".
3355 * v850-dis.c (print_insn_v850): Fix typo in last change.
3357 * v850-dis.c (print_insn_v850): Properly handle disassembling
3358 a two byte insn at the end of a memory region when the memory
3359 region's size is only two byte aligned.
3361 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3363 * v850-dis.c (v850_reg_names): Define.
3364 (v850_sreg_names, v850_cc_names): Likewise.
3365 (disassemble): Very rough cut at printing operands (unformatted).
3367 * v850-opc.c (BOP_MASK): Fix.
3368 (v850_opcodes): Fix mask for jarl and jr.
3370 * v850-dis.c: New file. Skeleton for disassembler support.
3371 * Makefile.in Remove v850 references, they're not needed here.
3372 * configure.in: Add v850-dis.o when building v850 toolchains.
3373 * configure: Rebuilt.
3374 * disassemble.c (disassembler): Call v850 disassembler.
3376 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3377 (insert_d8_6, extract_d8_6): New functions.
3378 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3379 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3381 (IF4A, IF4B): Use "D7" instead of "D7S".
3382 (IF4C, IF4D): Use "D8_7" instead of "D8".
3383 (IF4E, IF4F): New. Use "D8_6".
3384 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3385 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3387 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3388 (v850_operands): Change D16 to D16_15, use special insert/extract
3389 routines. New new D16 that uses the generic insert/extract code.
3390 (IF7A, IF7B): Use D16_15.
3391 (IF7C, IF7D): New. Use D16.
3392 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3394 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3395 message. Issue an error if the branch offset is odd.
3397 * v850-opc.c: Add notes about needing special insert/extract
3398 for all the load/store insns, except "ld.b" and "st.b".
3400 * v850-opc.c (insert_d22, extract_d22): New functions.
3401 (v850_operands): Use insert_d22 and extract_d22 for
3403 (insert_d9): Fix range check.
3405 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3407 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3408 and set bits field to D9 and D22 operands.
3410 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3412 * v850-opc.c (v850_operands): Define SR2 operand.
3413 (v850_opcodes): "ldsr" uses R1,SR2.
3415 * v850-opc.c (v850_opcodes): Fix opcode specs for
3416 sld.w, sst.b, sst.h, sst.w, and nop.
3418 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3420 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3421 end of the opcode table.
3423 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3425 * d10v-opc.c (pre_defined_registers): Added register pairs,
3426 "r0-r1", "r2-r3", etc.
3428 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3430 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3431 Create I16U for an unsigned 16bit mmediate operand.
3432 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3434 * v850-opc.c (v850_operands): Define EP operand.
3435 (IF4A, IF4B, IF4C, IF4D): Use EP.
3437 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3438 with immediate operand, "movhi". Tweak "ldsr".
3440 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3441 correct. Get sld.[bhw] and sst.[bhw] closer.
3443 * v850-opc.c (v850_operands): "not" is a two byte insn
3445 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3447 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3449 * v850-opc.c (two): Get order of words correct.
3451 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3453 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3454 register source and destination operands.
3455 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3457 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3458 same thinko in "trap" opcode.
3460 * v850-opc.c (v850_opcodes): Add initializer for size field
3463 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3464 Add D8 for 8-bit unsigned field in short load/store insns.
3465 (IF4A, IF4D): These both need two registers.
3466 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3467 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3468 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3469 for "ldsr" and "stsr".
3470 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3473 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3474 short store word (sst.w).
3476 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3478 * v850-opc.c (v850_operands): Added insert and extract fields,
3479 pointers to functions that handle unusual operand encodings.
3481 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3483 * v850-opc.c (v850_opcodes): Enable "trap".
3485 * v850-opc.c (v850_opcodes): Fix order of displacement
3486 and register for "set1", "clr1", "not1", and "tst1".
3488 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3490 * v850-opc.c (v850_operands): Add "B3" support.
3491 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3494 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3496 * v850-opc.c: Close unterminated comment.
3498 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3500 * v850-opc.c (v850_operands): Add flags field.
3501 (v850_opcodes): add move opcodes.
3503 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3505 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3506 * configure: (bfd_v850v_arch) Add new case.
3507 * configure.in: (bfd_v850_arch) Add new case.
3508 * v850-opc.c: New file.
3510 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3512 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3514 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3516 * d10v-opc.c: Add additional information to the opcode
3517 table to help determinine which instructions can be done
3520 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3522 * mpw-make.sed: Update editing of include pathnames to be
3525 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3527 * arm-opc.h: Added "bx" instruction definition.
3529 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3531 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3533 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3535 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3537 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3539 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3541 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3543 * makefile.vms: Update for alpha-opc changes.
3545 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3547 * i386-dis.c (print_insn_i386): Actually return the correct value.
3548 (ONE, OP_ONE): #ifdef out; not used.
3550 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3552 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3553 Changed subi operand type to treat 0 as 16.
3555 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3557 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3560 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3562 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3563 memory transfer instructions. Add new format string entries %h and %s.
3564 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3567 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3569 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3570 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3572 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3574 * alpha-dis.c (print_insn_alpha_osf): Remove.
3575 (print_insn_alpha_vms): Remove.
3576 (print_insn_alpha): Make globally visible. Chose the register
3577 names based on info->flavour.
3578 * disassemble.c: Always return print_insn_alpha for the alpha.
3580 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3582 * d10v-dis.c (dis_long): Handle unknown opcodes.
3584 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3586 * d10v-opc.c: Changes to support signed and unsigned numbers.
3587 All instructions with the same name that have long and short forms
3588 now end in ".l" or ".s". Divs added.
3589 * d10v-dis.c: Changes to support signed and unsigned numbers.
3591 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3593 * d10v-dis.c: Change all functions to use info->print_address_func.
3595 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3597 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3598 move ccr/sr insns more strict so that the disassembler only
3599 selects them when the addressing mode is data register.
3601 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3602 * d10v-opc.c (pre_defined_registers): Declare.
3603 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3604 to pick a better name for the registers.
3606 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3608 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3609 operands for fexpand and fpmerge. From Christian Kuehnke
3610 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3612 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3614 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3615 print routine. Take new regnames and cpumask arguments.
3616 Kill the environment variable nonsense.
3617 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3618 (print_insn_alpha_vms): New function. Do VMS style regnames.
3619 * disassemble.c (disassembler): Test bfd flavour to pick
3620 between OSF and VMS routines. Default to OSF.
3622 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3624 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3625 * configure: Rebuild.
3626 * Makefile.in (install): Use @INSTALL_SHLIB@.
3628 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3630 * configure: (bfd_d10v_arch) Add new case.
3631 * configure.in: (bfd_d10v_arch) Add new case.
3632 * d10v-dis.c: New file.
3633 * d10v-opc.c: New file.
3634 * disassemble.c (disassembler) Add entry for d10v.
3636 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3638 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3639 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3641 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3643 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3644 distinguish between variants of the instruction set.
3645 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3646 distinguish between variants of the instruction set.
3648 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3650 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3651 the 8086 instruction set.
3652 * i386-dis.c: General cleanups. Make most things static. Add
3653 prototypes. Get rid of static variables aflags and dflags. Pass
3654 them as args (to almost everything).
3656 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3658 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3660 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3662 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3663 if the next arg is marked with SRC_IN_DST. Gross.
3665 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3666 we're looking for and find EXR.
3668 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3669 if we're looking for KBIT and we don't find it.
3671 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3674 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3675 3bit immediate operands.
3677 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3679 * Released binutils 2.7.
3681 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3682 <kkaempf@progis.ac-net.de>.
3684 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3686 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3688 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3690 * sparc-dis.c (print_insn_sparclite): New routine to print
3691 sparclite instructions.
3693 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3695 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3697 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3699 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3700 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3701 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3703 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3705 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3706 Use autoconf-set values.
3707 (docdir, oldincludedir): Removed.
3708 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3710 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3712 * alpha-opc.c: New file.
3713 * alpha-opc.h: Remove.
3714 * alpha-dis.c: Complete rewrite to use new opcode table.
3715 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3716 * configure: Rebuild with autoconf 2.10.
3717 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3718 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3720 (alpha-opc.o): New target.
3722 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3724 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3725 Set imm_added_to_rs1 even if the source and destination register
3728 * sparc-opc.c: Add some two operand forms of the wr instruction.
3730 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3732 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3735 * disassemble.c (disassembler): Handle H8/S.
3736 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3738 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3740 * sparc-opc.c: Add beq/teq as aliases for be/te.
3742 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3743 <sergei@msil.sps.mot.com>.
3745 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3747 * makefile.vms: New file.
3749 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3751 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3753 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3756 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3758 * i386-dis.c (OP_OFF): Call append_prefix.
3760 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3762 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3763 unsigned long to silence a warning from the Solaris PowerPC
3766 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3768 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3770 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3772 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3774 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3775 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3776 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3777 cpush, cpusha, cpull sparclet insns.
3779 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3781 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3783 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3785 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3786 Set F_FLOAT on other floating point instructions.
3788 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3790 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3792 (powerpc_opcodes): Add 860/821 specific SPRs.
3794 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3796 * configure.in: Permit --enable-shared to specify a list of
3797 directories. Set and substitute BFD_PICLIST.
3798 * configure: Rebuild.
3799 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3800 uses. Set to @BFD_PICLIST@.
3802 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3804 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3805 not "abs", which may be needed for the absolute in something
3806 like btst #0,@10:8. Print L_3 immediates separately from other
3807 immediates. Change ABSMOV reference to ABS8MEM.
3809 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3811 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3812 (current_arch_mask): New static global.
3813 (compute_arch_mask): New static function.
3814 (print_insn_sparc): Delete sparc_v9_p. New static local
3815 current_mach. Resort opcode table if current_mach changes.
3816 Generalize "insn not supported" test.
3817 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3818 Delete test for v9/!v9.
3819 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3821 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3822 (brfcx): Renamed to FBRX.
3823 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3824 coprocessor mnemonics are not supported on the sparclet).
3825 (condf): Renamed to CONDF.
3826 (SLCBCC2): Delete F_ALIAS flag.
3828 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3830 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3831 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3833 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3835 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3836 that the shared library version number is set correctly.
3838 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3840 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3841 Miles Bader <miles@gnu.ai.mit.edu>.
3842 * configure: Rebuild.
3844 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3846 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3849 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3851 * configure: Rebuild with autoconf 2.8.
3853 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3855 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3856 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3858 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3860 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3861 since they appear as targets in Makefile.in.
3862 * configure: Rebuild.
3864 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3866 * mpw-make.sed: Edit out shared library support bits.
3868 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3870 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3871 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3872 (sparc_opcodes): Add sparclet insns.
3873 (sparclet_cpreg_table): New static local.
3874 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3875 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3877 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3879 * i386-dis.c (index16): New static variable.
3880 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3882 (OP_indirE): Return result of OP_E.
3883 (OP_E): Check for 16 bit addressing mode, and disassemble
3884 correctly. Optimised 32 bit case a little. Don't print
3885 "(base,index,scale)" when sib specifies only an offset.
3887 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3889 * configure.in: Set and substitute SHLIB_DEP.
3890 * configure: Rebuild.
3891 * Makefile.in (SHLIB_DEP): New variable.
3892 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3893 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3894 COMMON_SHLIB, add them to piclist with appropriate modifications.
3895 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3896 here: just use piclist.
3898 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3900 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3901 (print_insn_sparc): Rewrite v9/not-v9 tests.
3902 (compare_opcodes): Likewise.
3903 * sparc-opc.c (MASK_<ARCH>): Define.
3904 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3905 (sparclet,v6notv9): Define.
3906 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3907 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3909 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3911 * configure.in: Call AC_PROG_CC before configure.host.
3912 * configure: Rebuild.
3914 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3916 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3918 * i386-dis.c (onebyte_has_modrm): New static array.
3919 (twobyte_has_modrm): New static array.
3920 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3922 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3924 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3927 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3929 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3932 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3934 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3935 m68010up, not just m68020up | cpu32.
3937 * Makefile.in (SONAME): New variable.
3938 ($(SHLINK)): Make a link to the transformed name, as well.
3939 (stamp-tshlink): New target.
3940 (install): Skip stamp-tshlink during install.
3942 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3944 * configure.in: Call AC_ARG_PROGRAM.
3945 * configure: Rebuild.
3946 * Makefile.in (program_transform_name): New variable.
3947 (install): Transform library name before installing it.
3949 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3951 * i960-dis.c (mem): Add HX dcinva instruction.
3953 Support for building as a shared library, based on patches from
3954 Alan Modra <alan@spri.levels.unisa.edu.au>:
3955 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3956 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3957 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3958 * configure: Rebuild.
3959 * Makefile.in (ALLLIBS): New variable.
3960 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3961 (COMMON_SHLIB, SHLINK): New variables.
3962 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3963 (STAGESTUFF): Remove variable.
3964 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3965 (stamp-piclist, piclist): New targets.
3966 ($(SHLIB), $(SHLINK)): New targets.
3967 ($(OFILES)): Depend upon stamp-picdir.
3968 (disassemble.o): Build twice if PICFLAG is set.
3969 (MOSTLYCLEAN): Add pic/*.o.
3970 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3971 (distclean): Remove pic and stamp-picdir.
3972 (install): Install shared libraries.
3973 (stamp-picdir): New target.
3975 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3977 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3978 Print unknown instruction as "unknown", rather than in hex.
3980 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3982 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3984 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3986 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3988 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3990 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3991 when necessary. From Ulrich Drepper
3992 <drepper@myware.rz.uni-karlsruhe.de>.
3994 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3996 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3997 sparc_num_opcodes. Update architecture enum values.
3998 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3999 (sparc_opcode_lookup_arch): New function.
4000 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4001 (sparc_opcodes): Add v9a shutdown insn.
4003 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4005 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4006 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4008 (print_insn_sparc64): Deleted.
4009 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4012 * sparc-opc.c (architecture_pname): Add v9a.
4014 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4016 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4017 incorrectly defined as 0x16 when it should be 0x15.
4018 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4019 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4020 excb (exception barrier) which is defined in the Alpha
4021 Architecture Handbook version 2.
4022 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4023 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4024 disassembled as or, for example.
4026 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4028 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4029 (_print_insn_mips): Change i from int to unsigned int.
4031 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4033 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4034 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4036 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4038 * i386-dis.c: Added Pentium Pro instructions.
4040 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4042 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4045 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4047 * sh-opc.h (sh_nibble_type): Added REG_B.
4048 (sh_arg_type): Added A_REG_B.
4049 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4051 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4053 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4055 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4057 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4059 * Makefile.in (distclean): Remove stamp-h. From Ronald
4060 F. Guilmette <rfg@monkeys.com>.
4062 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4064 From David Mosberger-Tang <davidm@azstarnet.com>:
4065 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4068 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4070 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4071 (sh_table): Added many SH3 opcodes.
4072 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4074 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4076 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4077 (subco,subco.): Mark this PPC, not PPCCOM.
4079 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4081 * configure: Rebuild with autoconf 2.7.
4083 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4085 * configure: Rebuild with autoconf 2.6.
4087 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4089 * configure.in: Sort list of architectures. Accept but do nothing
4090 for alliant, convex, pyramid, romp, and tahoe.
4092 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4094 * a29k-dis.c (print_special): Change num to unsigned int.
4096 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4098 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4101 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4103 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4104 * configure: Rebuilt.
4106 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4108 * configure.in: Add case for bfd_i860_arch.
4109 * configure: Rebuild.
4111 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4113 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4114 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4115 (NEXTDOUBLE): Likewise.
4116 (print_insn_m68k): Don't match fmoveml if there is more than one
4117 register in the list.
4118 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4120 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4122 * m68k-opc.c: Use #W rather than #w.
4123 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4125 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4127 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4128 and likewise for all the dbxx opcodes.
4130 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4132 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4134 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4136 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4137 the VR4100 specific instructions to the mips_opcodes structure.
4139 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4141 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4142 ugly Metrowerks bug in CW6, is fixed in CW7.
4144 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4146 * ppc-opc.c (whole file): Add flags for common/any support.
4148 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4150 * Makefile.in (BISON): Remove macro.
4151 (FLAGS_TO_PASS): Remove BISON.
4153 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4155 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4157 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4158 instructions that take no args by looking at the match mask.
4159 (print_insn_arg): Always print "%" before register names.
4160 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4161 [case '_']: Don't print "@#" before address.
4162 [case 'J']: Use "%s" as format string, not register name.
4163 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4165 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4167 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4170 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4172 From David Mosberger-Tang <davidm@azstarnet.com>
4174 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4175 (alpha_insn_set): added definitions for VAX floating point
4176 instructions (Unix compilers don't generate these, but handcoded
4177 assembly might still use them).
4179 * alpha-dis.c (print_insn_alpha): added support for disassembling
4180 the miscellaneous instructions in the Alpha instruction set.
4182 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4184 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4185 no longer create sysdep.h, sed ppc-opc.c to work around a
4186 serious Metrowerks C bug.
4187 * mpw-make.in: Remove.
4188 * mpw-make.sed: New file, used by mpw-configure to edit
4189 Makefile.in into an MPW makefile.
4191 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4193 * Makefile.in (maintainer-clean): New synonym for realclean.
4195 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4197 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4198 which use '0', '1', and '2' instead. Specify the proper size for
4199 a pmove immediate operand. Correct the pmovefd patterns to be
4200 moves to a register, not from a register.
4201 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4203 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4205 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4206 %psr, %wim, %tbr as F_NOTV9.
4208 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4210 * Makefile.in (Makefile): Just rebuild Makefile when running
4212 (config.h, stamp-h): New targets.
4213 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4214 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4215 rebuilding config.h.
4216 * configure: Rebuild.
4218 * mips-opc.c: Change unaligned loads and stores with "t,A"
4219 operands to use "t,A(b)".
4221 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4223 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4225 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4227 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4228 until 3 instead of until 2.
4230 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4232 * Makefile.in (ALL_CFLAGS): Define.
4233 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4234 (MOSTLYCLEAN): Add config.log.
4235 (distclean): Don't remove config.log.
4236 * configure.in: Substitute HDEFINES.
4237 * configure: Rebuild.
4239 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4241 * sh-opc.h (sh_arg_type): Add F_FR0.
4242 (sh_table, case fmac): Add F_FR0 as first argument.
4244 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4246 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4248 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4250 * sparc-dis.c: Remove all references to NO_V9.
4252 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4254 * aclocal.m4: Just include ../bfd/aclocal.m4.
4255 * configure: Rebuild.
4257 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4259 * sparc-dis.c (X_DISP19): Define.
4260 (print_insn, case 'G'): Use it.
4261 (print_insn, case 'L'): Sign extend displacement.
4263 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4265 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4266 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4267 host_makefile_frag or frags.
4268 * aclocal.m4: New file.
4269 * configure: Rebuild.
4270 * Makefile.in (INSTALL): Set to @INSTALL@.
4271 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4272 (INSTALL_DATA): Set to @INSTALL_DATA@.
4274 (AR_FLAGS): Set to rc rather than qc.
4275 (CC): Define as @CC@.
4276 (CFLAGS): Set to @CFLAGS@.
4277 (@host_makefile_frag@): Remove.
4278 (config.status): Remove dependency upon @frags@.
4280 * configure.in: ../bfd/config.bfd now just sets shell variables.
4281 Use them rather than looking through target Makefile fragments.
4282 * configure: Rebuild.
4284 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4286 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4288 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4290 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4291 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4294 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4295 (lookup_{name,value}): New functions.
4296 (prefetch_table): New static local.
4297 (sparc_{encode,decode}_prefetch): New functions.
4298 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4300 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4302 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4305 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4307 * sh-dis.c: Correct comment on first line of file.
4309 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4311 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4313 * sparc-opc.c (asi, membar): New static locals.
4314 (sparc_{encode,decode}_{asi,membar}): New functions.
4315 (sparc_opcodes, membar insn): Fix.
4316 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4317 Support decoding of membar masks.
4320 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4322 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4324 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4326 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4327 and likewise for the other branches. Add bhs as an alias for bcc,
4328 and likewise for the size variants. Add dbhs as an alias for
4331 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4333 * sh-opc.h (FP sts instructions): Update to match reality.
4335 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4337 * m68k-dis.c: (fpcr_names): Add % before all register names.
4338 (reg_names): Likewise.
4339 (print_insn_arg): Don't explicitly print % before register names.
4340 Add % before register names in static array names. In case 'r',
4341 print data registers as `@(Dn)', not `Dn@'. When printing a
4342 memory address, don't print @# before it.
4343 (print_indexed): Change base_disp and outer_disp from int to
4344 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4345 syntax. Sign extend 8 byte displacement correctly.
4346 (print_base): Print using MIT syntax. Print zpc when appropriate.
4347 Change parameter disp from int to bfd_vma.
4349 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4352 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4354 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4355 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4356 * sh-opc.h (sh_arg_type): Add new operand types.
4357 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4359 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4361 * Makefile.in (distclean): Remove generated file config.h.
4363 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4365 * Makefile.in (distclean): Remove generated file config.h.
4367 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4369 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4371 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4373 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4374 rather than numopcodes. Use m68k_opcodes rather than removed
4375 opcode function. Don't check F_ALIAS.
4376 (print_insn_arg): Change first parameter to be const char *.
4377 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4378 (m68k-opc.o): New target.
4379 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4380 * configure: Rebuild.
4382 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4384 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4385 (opcode_bits, opcode_hash_table): New variables.
4386 (opcodes_initialized): Renamed from opcodes_sorted.
4387 (build_hash_table): New function.
4388 (is_delayed_branch): Use hash table.
4389 (print_insn): Renamed from print_insn_sparc, made static.
4390 Build and use hash table. If !sparc64, ignore sparc64 insns,
4391 and vice-versa if sparc64.
4392 (print_insn_sparc, print_insn_sparc64): New functions.
4393 (compare_opcodes): Move sparc64 opcodes to end.
4394 Print commutative insns with constant second.
4395 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4397 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4399 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4400 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4401 avoids printing a delay slot in a delay slot.
4402 * sh-opc.h (sh_table): Fully bracket last entry.
4404 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4406 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4408 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4410 * configure.in: Get host_makefile_frag from ${srcdir}.
4412 * configure.in: Autoconfiscated. Check for string[s].h. Create
4413 config.h from config.in. Don't set up sysdep.h link.
4414 * sysdep.h: New file.
4415 * configure, config.in: New files, generated from configure.in.
4416 * Makefile.in: Updated to be processed autoconf-style.
4417 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4418 (Makefile): Depend on config.status.
4419 (config.status): New rule.
4420 * configure.bat: Update Makefile substitutions.
4422 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4424 * mips-opc.c (L1): Define.
4425 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4426 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4429 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4431 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4432 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4433 have multiple add units but only a single logical unit.
4435 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4436 shifted by 18, without any insertion or extraction function.
4437 (insert_cr, extract_cr): Remove.
4439 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4441 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4444 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4446 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4447 * sh-opc.h: Add copyright.
4449 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4451 * Makefile.in (crunch-m68k): Delete extra target accidentally
4452 checked in a while ago.
4454 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4456 * sh-opc.h (sh_table): Add SH3 support.
4458 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4460 * sh-opc.h: Added bsrf and braf.
4462 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4464 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4465 bogus [ls]fm{ea,fd} patterns.
4467 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4468 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4469 initialize it from memory. Make function static.
4470 (print_insn_{big,little}_arm): New functions.
4471 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4472 the correct endianness.
4474 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4476 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4479 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4481 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4482 17th, so that it builds again using GCC as the compiler.
4484 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4486 * mips-dis.c (print_insn_little_mips): Cast return value from
4487 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4488 expects an unsigned long, and that might be fewer words of
4489 argument storage (e.g., if bfd_vma is long long on a 32-bit
4491 (print_insn_big_mips): Likewise with bfd_getb32 value.
4492 (_print_insn_mips): Now static.
4494 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4496 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4497 gcc memory hog problem with initializer is fixed.
4499 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4501 Merge in support for Mac MPW as a host.
4502 (Old change descriptions retained for informational value.)
4504 * mpw-config.in (archname): Compute from the config.
4505 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4507 * mpw-config.in (target_arch): Compute from canonical target.
4508 (m68k, mips, powerpc, sparc): Add architectures.
4509 * mpw-make.in (disassemble.c.o): Add.
4510 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4512 * mpw-config.in (BFD_MACHINES): Set to a default value.
4513 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4515 * mpw-make.in (CSEARCH): Add extra-include to search path.
4517 * mpw-config.in (varargs.h): Don't create.
4518 (sysdep.h): Create using forward-include.
4519 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4521 * mpw-config.in: New file, MPW version of configure.in.
4522 * mpw-make.in: New file, MPW version of Makefile.in.
4524 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4526 * alpha-dis.c (print_insn_alpha): Put empty statement after
4529 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4531 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4532 (low_sign_extend): Likewise.
4533 (get_field): Delete unused function.
4534 (set_field, deposit_14, deposit_21): Likewise.
4536 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4538 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4541 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4543 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4545 * alpha-opc.h (OSF_ASMCODE): define
4546 print pal-code names as defined in App C of the
4547 Alpha Architecture Reference Manual
4549 * alpha-dis.c: cleaned up output
4550 print stylized code forms as defined in App A.4.3 of the
4551 Alpha Architecture Reference Manual
4553 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4555 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4557 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4560 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4562 * m68k-dis.c (opcode): New function. Returns address of opcode
4563 table entry given index, even if the opcode table was split to
4564 work around gcc bugs.
4565 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4567 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4568 (reg_names): Now const.
4569 (print_insn_arg): Arrays cacheFieldName and names now const.
4570 (print_indexed): Array scales now const.
4572 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4574 * ppc-opc.c: Sort recently added instructions by minor opcode
4575 number within major opcode number.
4577 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4579 * hppa-dis.c: Include libhppa.h.
4581 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4583 * mips-opc.c: Change dli to use M_DLI, and add dla.
4585 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4587 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4589 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4591 * mips-opc.c: Add r4650 mul instruction.
4593 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4595 * mips-opc.c: Add uld and usd macros for unaligned double load and
4598 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4600 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4601 mfdcr, mtdcr, icbt, iccci.
4603 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4605 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4606 signed char fields to shorts, more portable.
4608 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4610 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4611 char fields as signed chars, since they may have negative values.
4613 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4615 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4616 (mycroft@netbsd.org).
4618 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4620 From "Logg, Ed" <elogg@ea.com>:
4621 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4622 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4625 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4627 * ppc-opc.c: Changes based on patch from David Edelsohn
4628 <edelsohn@mhpcc.edu>.
4629 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4632 (insert_tbr): New static function.
4633 (extract_tbr): New static function.
4634 (XFXFXM_MASK, XFXM): Define.
4635 (XSPRBAT_MASK, XSPRG_MASK): Define.
4636 (powerpc_opcodes): Add instructions to access special registers by
4637 name. Add mtcr and mftbu.
4639 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4641 * mips-opc.c (P3): Define.
4642 (mips_opcodes): Add mad and madu.
4644 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4646 * configure.in: Add W65 support.
4647 * disassemble.c: Likewise.
4648 * w65-opc.h, w65-dis.c: New files.
4650 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4652 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4655 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4657 * mips-opc.c: Add dli as a synonym for li.
4659 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4661 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4662 print something for reserved opcode values, even if it won't
4665 * mips-dis.c (_print_insn_mips): When initializing, shift right
4666 and mask, to avoid sign extension problems on the Alpha.
4668 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4671 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4673 * sh-opc.h (mov.l gbr): Get direction right.
4674 * sh-dis.c (print_insn_shx): New function.
4675 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4676 print opcodes with right byte order.
4678 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4680 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4681 to avoid conflicts with getopt.
4683 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4685 * hppa-dis.c (print_insn_hppa): Read the instruction using
4686 bfd_getb32, so that it works on a little endian or 64 bit host.
4687 Remove unused local variable op.
4689 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4691 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4692 addu does not work correctly if -mips3.
4694 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4696 * a29k-dis.c (print_special): Add special register names defined
4697 on 29030, 29040 and 29050.
4698 (print_insn): Handle new operand type 'I'.
4700 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4702 * Makefile.in (INSTALL): Use top level install.sh script.
4704 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4706 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4707 that it works on a little endian host.
4709 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4711 * configure.in: Use ${config_shell} when running config.bfd.
4713 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4715 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4717 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4719 * a29k-dis.c (print_insn): Print the opcode.
4721 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4723 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4725 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4727 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4729 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4731 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4732 which store a value into memory.
4734 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4736 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4737 * arm-dis.c, arm-opc.h: New files.
4739 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4741 * Makefile.in (ns32k-dis.o): Add dependency.
4742 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4743 string, not as array of chars.
4745 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4747 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4749 * sparc-opc.c: Added sparclite extended FP operations, and
4750 versions of v9 impdep* instructions permitting specification of
4753 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4755 * i960-dis.c (reg_names): Now const.
4756 (struct sparse_tabent): New type, copied from array type in mem
4758 (ctrl): Local static array ctrl_tab now const.
4759 (cobr): Local static array cobr_tab now const.
4760 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4761 static variable mem_tab no longer explicitly initialized. Changed
4762 mem_init to const array of struct sparse_tabent.
4763 (reg): Local static variable reg_tab no longer explicitly
4764 initialized. Changed reg_init to const array of struct
4766 (ea): Local static array scale_tab now const.
4768 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4771 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4773 * configure.bat: the disassember needs to be enabled for
4774 "objdump -d" to work in djgpp.
4776 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4778 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4779 (invalid_float): Enabled general version, doesn't require running
4780 on ns32k host. Changed to take char* argument, and test for
4781 explicitly specified sizes, instead of using sizeof() on host CPU
4783 (INVALID_FLOAT): Cast first argument.
4784 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4785 list_P032, list_M032): Now const.
4786 (optlist, list_search): Made appropriate arguments now point to
4788 (print_insn_arg): Changed static array of one-character-string
4789 pointers into a static const array of characters; fixed sprintf
4790 statement accordingly.
4792 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4794 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4795 from distribution. A ns32k-dis.c from a previous distribution has
4796 been brought up to date and supports the new interface.
4798 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4800 * configure.in: add bfd_ns32k_arch target support.
4802 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4803 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4805 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4807 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4810 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4812 * h8300-dis.c, mips-dis.c: Don't use true and false.
4814 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4816 * configure.in: Change --with-targets to --enable-targets.
4818 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4820 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4821 opcodes to the first instruction with that opcode, to speed
4822 disassembly of large files. From ralphc@pyramid.com (Ralph
4825 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4827 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4829 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4831 * configure.bat: update to latest makefile.in
4833 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4835 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4836 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4837 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4838 slot insn is in a delay slot.
4839 * z8k-opc.h: (resflg): Fix patterns.
4840 * h8500-opc.h Fix CR insn patterns.
4842 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4844 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4845 "cmpl" before POWER versions, so that gas -many uses them.
4847 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4849 * disassemble.c: New file.
4850 * Makefile.in (OFILES): Add disassemble.o.
4851 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4852 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4853 binutils/configure.in.
4855 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4856 opcode being examined.
4858 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4860 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4861 (insert_ral, insert_ram, insert_ras): New functions.
4862 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4863 RAS for store with update.
4865 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4867 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4868 (edelsohn@npac.syr.edu).
4870 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4872 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4875 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4877 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4879 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4881 * ppc-opc.c (powerpc_operands): The signedp field has been
4882 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4883 instead. Add new operand SISIGNOPT.
4884 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4885 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4886 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4889 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4891 * i386-dis.c (struct private): Renamed to dis_private. `private'
4892 is a reserved word for dynix cc.
4894 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * configure.in: Change error message to refer to bfd/config.bfd
4897 rather than bfd/configure.in.
4899 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4901 * ppc-opc.c: Define POWER2 as short alias flag.
4902 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4905 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4907 * i960-dis.c (print_insn_i960): Don't read a second word for
4908 opcodes 0, 1, 2 and 3.
4910 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4912 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4914 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4916 * m68881-ext.c: Removed; no longer used.
4917 * Makefile.in: Changed accordingly.
4919 * m68k-dis.c (ext_format_68881): Don't declare.
4920 (print_insn_m68k): If an instruction uses place 'i', it uses at
4921 least four fixed bytes.
4922 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4923 extended float, convert to double using floatformat_to_double, not
4924 ieee_extended_to_double, and fetch the data before converting it.
4926 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4928 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4929 davidj@ICSI.Berkeley.EDU (David Johnson).
4931 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4933 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4934 PowerPC uses bdnz[l][a].
4936 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4938 * dis-buf.c, i386-dis.c: Include sysdep.h.
4940 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4942 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4944 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4945 by Motorola PowerPC 601 with PPC_OPCODE_601.
4946 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4947 Disassemble Motorola PowerPC 601 instructions as well as normal
4948 PowerPC instructions.
4950 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4952 * i960-dis.c (reg, mem): Just use a static array instead of
4955 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4957 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4958 condition name index if this is for a negated condition.
4960 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4961 Floating point format for 'H' operand is backwards from normal
4962 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4963 operands (fmpyadd and fmpysub), handle bizarre register
4964 translation correctly for single precision format.
4966 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4967 or 'I' operands if the next format specifier is 'M' (fcmp
4968 condition completer).
4970 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4972 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4973 single number giving a bitmask for the MB and ME fields of an M
4974 form instruction. Change NB to accept 32, and turn it into 0;
4975 also turn 0 into 32 when disassembling. Seperated SH from NB.
4976 (insert_mbe, extract_mbe): New functions.
4977 (insert_nb, extract_nb): New functions.
4978 (SC_MASK): Mask out SA and LK bits.
4979 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4980 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4981 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4982 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4983 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4984 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4985 (powerpc_macros): Define table of macro definitions.
4986 (powerpc_num_macros): Define.
4988 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4989 if PPC_OPERAND_NEXT is set.
4991 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4993 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4994 char. Retrieve contents using bfd_getl32 instead of shifting.
4996 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4998 * ppc-opc.c: New file. Opcode table for PowerPC, including
4999 opcodes for POWER (RS/6000).
5000 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5001 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5002 (CFILES): Add ppc-dis.c.
5003 (ppc-dis.o, ppc-opc.o): New targets.
5004 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5006 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5008 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5009 No space before 'u', 'f', or 'N'.
5011 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5013 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5014 farther than we should.
5016 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5018 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5020 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5022 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5024 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5025 needs it, to prevent reading past the end of a section.
5027 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5029 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5030 Removed t,A case for la; always use t,A(b) case.
5032 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5034 From Ted Lemen <mellon@pepper.ncd.com>
5035 * mips-dis.c (print_insn_arg): Handle 'k'.
5036 * mips-opc.c: Make cache use k, not t.
5038 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5040 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5041 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5042 FLOAT_FORMAT_CODE to put out floating point register names.
5044 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5046 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5048 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5050 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5052 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5054 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5055 larger than 32. Moved dsxx32 variants first for disassembler.
5057 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5059 * z8kgen.c, z8k-opc.h: Add full lda information.
5061 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5063 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5064 movb instructions. Any necessary space will be emitted by
5065 the code to handle nullification completers.
5067 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5069 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5071 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5073 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5074 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5076 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5078 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5080 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5082 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5083 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5085 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5087 * m88k-dis.c (m88kdis): comment change. Remove space after
5089 (printop): handle new arg types DEC and XREG for m88110.
5091 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5093 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5094 type for absolute branch addresses. Delete special
5095 "ble" and "be" code in 'W' operand code.
5097 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5099 * mips-opc.c: Set hazard information correctly for branch
5100 likely instructions.
5102 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5104 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5105 info->fprintf_func for printing and info->print_address_func for
5108 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5110 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5112 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5114 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5115 Corrected second case of "b" for disassembler.
5117 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5119 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5120 to BFD swapping routines to correspond to BFD name changes.
5122 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5124 * mips-opc.c: Change div machine instruction to be z,s,t rather
5125 than s,t. Change div macro to be d,v,t rather than d,s,t.
5126 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5127 rem and remu which generates only the corresponding div
5128 instruction. This is for compatibility with the MIPS assembler,
5129 which only generates the simple machine instruction when an
5130 explicit destination of $0 is used.
5131 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5133 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5135 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5136 WR_31 hazard for bal, bgezal, bltzal.
5138 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5140 * hppa-dis.c (print_insn_hppa): Use print function
5141 from within the disassemble_info, not fprintf_filtered.
5143 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5145 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5146 Law, law@cs.utah.edu.)
5148 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5150 * mips-opc.c ("absu"): Removed.
5153 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5155 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5156 Changed hazard information to distinguish between memory load
5157 delays and coprocessor load delays.
5159 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5161 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5163 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5165 * configure.in: Don't pass cpu to config.bfd.
5167 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5169 * m88k-dis.c (m88kdis): Make class unsigned.
5171 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5173 * alpha-dis.c (print_insn_alpha): One branch format case was
5174 missing the instruction name.
5176 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5178 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5179 Add the arch-specific auxiliary files.
5180 (OFILES): Remove the arch-specific auxiliary files
5181 and use BFD_MACHINES instead of DIS_LIBS.
5182 * configure.in: Set BFD_MACHINES based on --with-targets option.
5184 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5186 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5189 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5191 * sparc-opc.c: Change CONST to const to deal with gcc
5192 -Dconst=__const -traditional.
5194 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5196 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5197 coprocessor instructions out of #if 0, and made them use new
5200 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5202 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5204 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5206 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5207 instruction, for use by the disassembler.
5209 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5210 hand-coded sign extensions that depended on 32-bit host ints.
5211 FIXME, we still depend on big-endian host bitfield ordering.
5212 (sparc_print_insn): Set the insn_info_valid field, and the
5213 other fields that describe the instruction being printed.
5215 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5217 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5218 `jmp' instead of just one of them.
5220 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5222 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5223 (fput_fp_reg_r): Renamed from fput_reg_r.
5224 (fput_fp_reg): New function.
5225 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5227 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5229 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5231 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5233 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5235 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5236 don't output a space.
5238 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5240 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5242 * mips-opc.c: New file, containing opcode table from
5243 ../include/opcode/mips.h.
5244 * Makefile.in: Add it.
5246 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5248 * m88k-dis.c: New file, moved in from gdb and changed to use the
5249 new dis-asm.h disassembler interface.
5250 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5251 (m88k-dis.o): New target.
5253 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5255 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5256 argument string const char * to correspond to opcode/mips.h.
5258 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5260 * mips-dis.c: Updated to account for name changes in new version
5262 * Makefile.in: Added header file dependencies.
5264 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5266 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5268 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5270 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5271 extend, rather than shifts.
5273 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5275 * Makefile.in: Undo 15 June change.
5277 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5279 * m68k-dis.c (print_insn_arg): Change return value to byte count
5281 * m68k-dis.c: Re-write to detect invalid operands before
5282 printing anything, so we can handle this the same way we
5283 handle invalid opcodes.
5285 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5287 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5289 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5291 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5294 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5296 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5298 * configure.in: Do make sysdep.h link.
5299 * Makefile.in: Search ../include. Don't search ../bfd.
5301 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5303 Changes from Jeff Law, law@cs.utah.edu:
5304 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5305 Do not print a space before the completers specified by
5308 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5310 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5311 defined, since gdb has been fixed.
5313 Changes from Jeff Law, law@cs.utah.edu:
5314 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5315 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5316 be a *disassemble_info, not a *FILE.
5317 * hppa-dis.c: Support 'd', '!', and 'a'.
5318 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5319 * hppa-dis.c: Delete cases which are no longer needed.
5321 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5323 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5325 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5327 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5330 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5332 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5333 * configure.in: No longer need to configure to get sysdep.h.
5335 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5337 * Patches from Jeffrey Law <law@cs.utah.edu>.
5338 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5339 templates for 1.1 FP computational instructions.
5341 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5343 * h8500-dis.c (print_insn_h8500): Address argument is type
5345 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5348 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5349 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5351 * sparc-dis.c (compare_opcodes): Move static declaration to
5354 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5356 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5357 instruction, remove unimp hack from 'l' argument.
5359 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5361 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5364 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5366 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5367 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5370 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5372 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5373 arrays of string pointers to 2-d arrays of chars, to save
5376 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5378 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5379 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5381 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5383 * hppa-dis.c: New file from Utah, adapted to new disassembler
5385 * Makefile.in: Include it.
5387 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5389 * sh-dis.c, sh-opc.h: New files.
5391 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5393 * alpha-dis.c, alpha-opc.h: New files.
5395 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5397 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5400 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5402 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5404 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5406 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5409 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5411 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5412 and double percent signs a few places.
5414 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5416 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5417 Use info->print_address_func not print_address.
5419 * dis-buf.c (generic_print_address): New function.
5421 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5423 * Makefile.in: Add sparc-dis.c.
5424 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5426 Add `add' instruction to the set that get checked
5427 for a preceding `sethi' in order to print an absolute address.
5428 * (print_insn): Disassembly prefers real instructions.
5429 (is_delayed_branch): Speed up.
5430 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5431 Still missing some float ops, and needs testing.
5432 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5433 F_ALIAS. Use printf, not fprintf, when not passing a file
5435 (compare_opcodes): Check that identical instructions have
5436 identical opcodes, complain otherwise.
5439 * Include reg_names.
5441 Use dis-asm.h/read_memory_func interface.
5443 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5445 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5446 deliberately return non-zero to setjmp from longjmp. Otherwise
5447 this code fails to compile.
5449 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5451 * m68k-dis.c: Fix prototype for fetch_arg().
5453 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5455 * dis-buf.c: New file, for new read_memory_func interface.
5456 Makefile.in (OFILES): Include it.
5457 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5458 Use new read_memory_func interface.
5460 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5462 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5463 * h8500-opc.h: Fix couple of opcodes.
5465 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5467 * Makefile.in: add dvi & installcheck targets
5469 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5471 * Makefile.in: Update for h8500-dis.c.
5473 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5475 * h8500-dis.c, h8500-opc.h: New files
5477 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5479 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5480 ../include/dis-asm.h.
5481 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5482 and ../gdb/m68k-pinsn.c).
5483 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5484 and ../gdb/i386-pinsn.c).
5485 * m68881-ext.c: New file. Moved definition of
5486 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5487 * Makefile.in: Adjust for new files.
5488 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5489 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5490 can be dis-assembled.
5492 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5494 * mips-dis.c (print_insn_arg): Now returns void.
5496 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5498 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5499 files that use the macros.
5501 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5503 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5504 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5505 (CFILES): Added mips-dis.c.
5507 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5509 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5510 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5512 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5514 * Makefile.in: Improve *clean rules.
5515 * configure.in: Allow a default host.
5517 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5519 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5520 files include other sysdep files
5522 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5524 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5526 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5528 * configure.in: For host support, use ../bfd/configure.host
5529 so it stays in sync with the ../bfd/hosts database.
5531 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5533 * configure.in: use cpu-vendor-os triple instead of nested cases
5535 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5537 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5538 *always* the wrong one.
5540 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5542 * z8kgen.c: added copyright info
5544 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5546 * z8k-dis.c (unparse_instr): prettier tabs
5547 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5549 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5551 * configure.in: Add ncr* configuration.
5552 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5553 picayune ANSI compilers happy.
5555 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5557 * configure.in (i386): Make i386 and i486 synonymous for now.
5558 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5560 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5562 * Makefile.in (install): Fix typo.
5564 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5566 * Makefile.in (make): Remove obsolete crud.
5567 (sparc-opc.o): Avoid Sun Make VPATH bug.
5569 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5571 * Makefile.in: since there are no SUBDIRS, remove rule and
5572 references of subdir_do.
5574 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5576 * Makefile.in (install): Get the library name right here too.
5577 Don't install bfd.h, since it's unrelated to this library. No
5578 subdirs to recurse into, either.
5579 (CFILES): The source file has a .c suffix, not .o.
5581 * sparc-opc.c: New file, moved from BFD.
5582 * Makefile.in (OFILES): Build it.
5584 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5586 * z8k-dis.c: fixed forward refferences of some declarations.
5588 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5590 * Makefile.in: get the name of the library right
5592 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5594 * z8k-dis.c: knows how to disassemble z8k stuff
5595 * z8k-opc.h: new file full of z8000 opcodes
5599 version-control: never
projects / deliverable / binutils-gdb.git / blob