1 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
5 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
7 * i386-dis.c (onebyte_has_modrm): New static array.
8 (twobyte_has_modrm): New static array.
9 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
11 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
13 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
16 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
18 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
21 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
23 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
24 m68010up, not just m68020up | cpu32.
26 * Makefile.in (SONAME): New variable.
27 ($(SHLINK)): Make a link to the transformed name, as well.
28 (stamp-tshlink): New target.
29 (install): Skip stamp-tshlink during install.
31 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
33 * configure.in: Call AC_ARG_PROGRAM.
35 * Makefile.in (program_transform_name): New variable.
36 (install): Transform library name before installing it.
38 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
40 * i960-dis.c (mem): Add HX dcinva instruction.
41 (reg): Add HX instructions.
43 The HX instructions are the XL instructions, so this just involves
44 arranges for them to not be sanitized.
47 Support for building as a shared library, based on patches from
48 Alan Modra <alan@spri.levels.unisa.edu.au>:
49 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
50 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
51 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
53 * Makefile.in (ALLLIBS): New variable.
54 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
55 (COMMON_SHLIB, SHLINK): New variables.
56 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
57 (STAGESTUFF): Remove variable.
58 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
59 (stamp-piclist, piclist): New targets.
60 ($(SHLIB), $(SHLINK)): New targets.
61 ($(OFILES)): Depend upon stamp-picdir.
62 (disassemble.o): Build twice if PICFLAG is set.
63 (MOSTLYCLEAN): Add pic/*.o.
64 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
65 (distclean): Remove pic and stamp-picdir.
66 (install): Install shared libraries.
67 (stamp-picdir): New target.
69 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
71 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
72 Print unknown instruction as "unknown", rather than in hex.
74 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
76 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
78 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
80 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
82 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
84 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
85 when necessary. From Ulrich Drepper
86 <drepper@myware.rz.uni-karlsruhe.de>.
88 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
90 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
91 sparc_num_opcodes. Update architecture enum values.
92 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
93 (sparc_opcode_lookup_arch): New function.
94 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
95 (sparc_opcodes): Add v9a shutdown insn.
97 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
99 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
100 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
102 (print_insn_sparc64): Deleted.
103 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
106 * sparc-opc.c (architecture_pname): Add v9a.
108 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
110 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
111 incorrectly defined as 0x16 when it should be 0x15.
112 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
113 (alpha_insn_set): added cvtst and cvttq float ops. Also added
114 excb (exception barrier) which is defined in the Alpha
115 Architecture Handbook version 2.
116 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
117 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
118 disassembled as or, for example.
120 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
122 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
123 (_print_insn_mips): Change i from int to unsigned int.
125 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
127 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
128 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
130 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
132 * i386-dis.c: Added Pentium Pro instructions.
134 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
136 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
139 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
141 * sh-opc.h (sh_nibble_type): Added REG_B.
142 (sh_arg_type): Added A_REG_B.
143 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
145 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
147 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
149 * disassemble.c (disassembler): Use new bfd_big_endian macro.
151 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
153 * Makefile.in (distclean): Remove stamp-h. From Ronald
154 F. Guilmette <rfg@monkeys.com>.
156 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
158 From David Mosberger-Tang <davidm@azstarnet.com>:
159 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
162 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
164 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
165 (sh_table): Added many SH3 opcodes.
166 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
168 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
170 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
171 (subco,subco.): Mark this PPC, not PPCCOM.
173 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
175 * configure: Rebuild with autoconf 2.7.
177 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
179 * configure: Rebuild with autoconf 2.6.
181 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
183 * configure.in: Sort list of architectures. Accept but do nothing
184 for alliant, convex, pyramid, romp, and tahoe.
186 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
188 * a29k-dis.c (print_special): Change num to unsigned int.
190 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
192 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
195 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
197 * configure.in: Call AC_CHECK_PROG to find and cache AR.
198 * configure: Rebuilt.
200 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
202 * configure.in: Add case for bfd_i860_arch.
203 * configure: Rebuild.
205 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
207 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
208 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
209 (NEXTDOUBLE): Likewise.
210 (print_insn_m68k): Don't match fmoveml if there is more than one
211 register in the list.
212 (print_insn_arg): Handle a place of '8' for a type of 'L'.
214 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
216 * m68k-opc.c: Use #W rather than #w.
217 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
219 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
221 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
222 and likewise for all the dbxx opcodes.
224 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
226 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
228 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
230 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
231 the VR4100 specific instructions to the mips_opcodes structure.
233 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
235 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
236 ugly Metrowerks bug in CW6, is fixed in CW7.
238 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
240 * ppc-opc.c (whole file): Add flags for common/any support.
242 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
244 * Makefile.in (BISON): Remove macro.
245 (FLAGS_TO_PASS): Remove BISON.
247 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
249 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
251 * m68k-dis.c (print_insn_m68k): Recognize all two-word
252 instructions that take no args by looking at the match mask.
253 (print_insn_arg): Always print "%" before register names.
254 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
255 [case '_']: Don't print "@#" before address.
256 [case 'J']: Use "%s" as format string, not register name.
257 [case 'B']: Treat place == 'C' like 'l' and 'L'.
259 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
261 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
264 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
266 From David Mosberger-Tang <davidm@azstarnet.com>
268 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
269 (alpha_insn_set): added definitions for VAX floating point
270 instructions (Unix compilers don't generate these, but handcoded
271 assembly might still use them).
273 * alpha-dis.c (print_insn_alpha): added support for disassembling
274 the miscellaneous instructions in the Alpha instruction set.
276 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
278 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
279 no longer create sysdep.h, sed ppc-opc.c to work around a
280 serious Metrowerks C bug.
281 * mpw-make.in: Remove.
282 * mpw-make.sed: New file, used by mpw-configure to edit
283 Makefile.in into an MPW makefile.
285 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
287 * Makefile.in (maintainer-clean): New synonym for realclean.
289 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
291 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
292 which use '0', '1', and '2' instead. Specify the proper size for
293 a pmove immediate operand. Correct the pmovefd patterns to be
294 moves to a register, not from a register.
295 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
297 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
299 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
300 %psr, %wim, %tbr as F_NOTV9.
302 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
304 * Makefile.in (Makefile): Just rebuild Makefile when running
306 (config.h, stamp-h): New targets.
307 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
308 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
310 * configure: Rebuild.
312 * mips-opc.c: Change unaligned loads and stores with "t,A"
313 operands to use "t,A(b)".
315 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
317 * sh-dis.c (print_insn_shx): Add F_FR0 support.
319 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
321 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
322 until 3 instead of until 2.
324 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
326 * Makefile.in (ALL_CFLAGS): Define.
327 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
328 (MOSTLYCLEAN): Add config.log.
329 (distclean): Don't remove config.log.
330 * configure.in: Substitute HDEFINES.
331 * configure: Rebuild.
333 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
335 * sh-opc.h (sh_arg_type): Add F_FR0.
336 (sh_table, case fmac): Add F_FR0 as first argument.
338 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
340 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
342 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
344 * sparc-dis.c: Remove all references to NO_V9.
346 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
348 * aclocal.m4: Just include ../bfd/aclocal.m4.
349 * configure: Rebuild.
351 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
353 * sparc-dis.c (X_DISP19): Define.
354 (print_insn, case 'G'): Use it.
355 (print_insn, case 'L'): Sign extend displacement.
357 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
359 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
360 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
361 host_makefile_frag or frags.
362 * aclocal.m4: New file.
363 * configure: Rebuild.
364 * Makefile.in (INSTALL): Set to @INSTALL@.
365 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
366 (INSTALL_DATA): Set to @INSTALL_DATA@.
368 (AR_FLAGS): Set to rc rather than qc.
369 (CC): Define as @CC@.
370 (CFLAGS): Set to @CFLAGS@.
371 (@host_makefile_frag@): Remove.
372 (config.status): Remove dependency upon @frags@.
374 * configure.in: ../bfd/config.bfd now just sets shell variables.
375 Use them rather than looking through target Makefile fragments.
376 * configure: Rebuild.
378 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
380 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
382 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
384 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
385 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
388 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
389 (lookup_{name,value}): New functions.
390 (prefetch_table): New static local.
391 (sparc_{encode,decode}_prefetch): New functions.
392 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
394 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
396 * sh-opc.h: Add blank lines to improve readabililty of sh3e
399 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
401 * sh-dis.c: Correct comment on first line of file.
403 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
405 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
407 * sparc-opc.c (asi, membar): New static locals.
408 (sparc_{encode,decode}_{asi,membar}): New functions.
409 (sparc_opcodes, membar insn): Fix.
410 * sparc-dis.c (print_insn): Call sparc_decode_asi.
411 Support decoding of membar masks.
414 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
416 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
418 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
420 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
421 and likewise for the other branches. Add bhs as an alias for bcc,
422 and likewise for the size variants. Add dbhs as an alias for
425 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
427 * sh-opc.h (FP sts instructions): Update to match reality.
429 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
431 * m68k-dis.c: (fpcr_names): Add % before all register names.
432 (reg_names): Likewise.
433 (print_insn_arg): Don't explicitly print % before register names.
434 Add % before register names in static array names. In case 'r',
435 print data registers as `@(Dn)', not `Dn@'. When printing a
436 memory address, don't print @# before it.
437 (print_indexed): Change base_disp and outer_disp from int to
438 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
439 syntax. Sign extend 8 byte displacement correctly.
440 (print_base): Print using MIT syntax. Print zpc when appropriate.
441 Change parameter disp from int to bfd_vma.
443 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
446 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
448 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
449 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
450 * sh-opc.h (sh_arg_type): Add new operand types.
451 (sh_table): Add new opcodes from SH3E Floating Point ISA.
453 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
455 * Makefile.in (distclean): Remove generated file config.h.
457 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
459 * Makefile.in (distclean): Remove generated file config.h.
461 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
463 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
465 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
467 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
468 rather than numopcodes. Use m68k_opcodes rather than removed
469 opcode function. Don't check F_ALIAS.
470 (print_insn_arg): Change first parameter to be const char *.
471 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
472 (m68k-opc.o): New target.
473 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
474 * configure: Rebuild.
476 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
478 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
479 (opcode_bits, opcode_hash_table): New variables.
480 (opcodes_initialized): Renamed from opcodes_sorted.
481 (build_hash_table): New function.
482 (is_delayed_branch): Use hash table.
483 (print_insn): Renamed from print_insn_sparc, made static.
484 Build and use hash table. If !sparc64, ignore sparc64 insns,
485 and vice-versa if sparc64.
486 (print_insn_sparc, print_insn_sparc64): New functions.
487 (compare_opcodes): Move sparc64 opcodes to end.
488 Print commutative insns with constant second.
489 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
491 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
493 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
494 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
495 avoids printing a delay slot in a delay slot.
496 * sh-opc.h (sh_table): Fully bracket last entry.
498 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
500 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
502 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
504 * configure.in: Get host_makefile_frag from ${srcdir}.
506 * configure.in: Autoconfiscated. Check for string[s].h. Create
507 config.h from config.in. Don't set up sysdep.h link.
508 * sysdep.h: New file.
509 * configure, config.in: New files, generated from configure.in.
510 * Makefile.in: Updated to be processed autoconf-style.
511 (distclean): Keep sysdep.h. Remove config.log and config.cache.
512 (Makefile): Depend on config.status.
513 (config.status): New rule.
514 * configure.bat: Update Makefile substitutions.
516 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
518 * mips-opc.c (L1): Define.
519 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
520 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
523 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
525 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
526 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
527 have multiple add units but only a single logical unit.
529 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
530 shifted by 18, without any insertion or extraction function.
531 (insert_cr, extract_cr): Remove.
534 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
536 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
539 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
541 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
544 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
546 * mpw-config.in: Add sh and i386 configs, remove sparc config.
547 * sh-opc.h: Add copyright.
549 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
551 * Makefile.in (crunch-m68k): Delete extra target accidentally
552 checked in a while ago.
554 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
556 * sh-opc.h (sh_table): Add SH3 support.
558 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
560 * sh-opc.h: Added bsrf and braf.
562 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
564 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
565 bogus [ls]fm{ea,fd} patterns.
567 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
568 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
569 initialize it from memory. Make function static.
570 (print_insn_{big,little}_arm): New functions.
571 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
572 the correct endianness.
575 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
577 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
578 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
581 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
583 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
586 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
588 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
589 17th, so that it builds again using GCC as the compiler.
591 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
593 * mips-dis.c (print_insn_little_mips): Cast return value from
594 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
595 expects an unsigned long, and that might be fewer words of
596 argument storage (e.g., if bfd_vma is long long on a 32-bit
598 (print_insn_big_mips): Likewise with bfd_getb32 value.
599 (_print_insn_mips): Now static.
601 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
603 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
604 gcc memory hog problem with initializer is fixed.
607 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
609 * arc-opc.c (NULL): Define.
610 (arc_operands, insn fields u,s): Delete.
611 (arc_operands, insn fields a,b,c): Mark as signed.
612 (arc_opcodes): No longer const, links computed at run-time.
613 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
614 suffixes that affect the insn code.
615 (arc_opcodes): Resort table to macros are first.
616 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
617 (arc_opcodes, st [b] entry): Likewise.
618 (arc_opcodes, st [b,d] entry): Fix mask, value.
619 (arc_reg_names): Add entries for r29, r30, r31, r60.
620 (opcode_map, icode_map): New static globals.
621 (arc_opcode_init_tables): Initialize them.
622 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
623 (insert_shimmoffset): Signal error if register present.
625 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
628 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
630 Merge in support for Mac MPW as a host.
631 (Old change descriptions retained for informational value.)
633 * mpw-config.in (archname): Compute from the config.
634 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
636 * mpw-config.in (target_arch): Compute from canonical target.
637 (m68k, mips, powerpc, sparc): Add architectures.
638 * mpw-make.in (disassemble.c.o): Add.
639 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
641 * mpw-config.in (BFD_MACHINES): Set to a default value.
642 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
644 * mpw-make.in (CSEARCH): Add extra-include to search path.
646 * mpw-config.in (varargs.h): Don't create.
647 (sysdep.h): Create using forward-include.
648 * mpw-make.in (CSEARCH): Add include/mpw to search path.
650 * mpw-config.in: New file, MPW version of configure.in.
651 * mpw-make.in: New file, MPW version of Makefile.in.
654 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
656 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
657 Call arc_get_opcode_mach to map bfd mach number to opcode value.
658 (print_insn_*): Pass bfd mach number, not opcode version.
659 * arc-opc.c (arc_get_opcode_mach): New function.
662 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
664 * alpha-dis.c (print_insn_alpha): Put empty statement after
667 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
669 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
670 (low_sign_extend): Likewise.
671 (get_field): Delete unused function.
672 (set_field, deposit_14, deposit_21): Likewise.
674 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
676 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
679 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
681 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
683 * alpha-opc.h (OSF_ASMCODE): define
684 print pal-code names as defined in App C of the
685 Alpha Architecture Reference Manual
687 * alpha-dis.c: cleaned up output
688 print stylized code forms as defined in App A.4.3 of the
689 Alpha Architecture Reference Manual
691 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
693 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
695 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
698 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
700 * m68k-dis.c (opcode): New function. Returns address of opcode
701 table entry given index, even if the opcode table was split to
702 work around gcc bugs.
703 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
705 (BREAK_UP_BIG_DECL): Make secondary array static and const.
706 (reg_names): Now const.
707 (print_insn_arg): Arrays cacheFieldName and names now const.
708 (print_indexed): Array scales now const.
711 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
713 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
714 (print_insn_arc_{host,graphics,audio}): Likewise.
715 (print_insn): Add prototype.
716 (arc_get_disassembler): New arg `big_p'. Return little or big
717 print fn accordingly.
718 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
719 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
720 (arc_opval_supported): Likewise.
721 * disassemble.c (disassembler): Pass big endian flag to
722 arc_get_disassembler.
725 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
727 * ppc-opc.c: Sort recently added instructions by minor opcode
728 number within major opcode number.
730 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
732 * hppa-dis.c: Include libhppa.h.
734 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
736 * mips-opc.c: Change dli to use M_DLI, and add dla.
738 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
740 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
743 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
745 * arc-dis.c (arc_get_disassembler): Change argument to int,
746 one of bfd_mach_arc_xxx. All callers updated.
749 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
751 * mips-opc.c: Add r4650 mul instruction.
753 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
755 * mips-opc.c: Add uld and usd macros for unaligned double load and
758 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
760 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
761 mfdcr, mtdcr, icbt, iccci.
764 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
766 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
767 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
768 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
769 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
770 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
771 (insert_absaddr): New function.
773 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
775 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
776 New argument `cpu', pass it to arc_opcode_init_tables.
777 Document byte order dependencies. Ignore unsupported insns.
778 (arc_get_disassembler): New function.
779 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
780 print_insn_arc_audio): New functions.
781 * arc-opc.c (MULTSHIFT operand): Delete.
782 (UNSIGNED, SATURATION): New operands.
783 (mac, mul, mul64, mulu64): New insns.
784 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
785 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
786 (host,graphics,audio extended and auxiliary regs): Define.
787 (ss, sc, mh, ml): New suffixes.
788 (arc_opcode_supported, arc_opval_supported): New functions.
789 (insert_multshift, extract_multshift): Deleted.
790 * disassemble.c (disassembler, case bfd_arch_arc): Call
791 arc_get_disassembler to get disassembler routine.
794 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
796 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
797 signed char fields to shorts, more portable.
799 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
801 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
802 char fields as signed chars, since they may have negative values.
804 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
806 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
807 (mycroft@netbsd.org).
809 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
811 From "Logg, Ed" <elogg@ea.com>:
812 * ppc-opc.c (extract_bdm): Correct parenthezisation.
813 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
816 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
818 * ppc-opc.c: Changes based on patch from David Edelsohn
819 <edelsohn@mhpcc.edu>.
820 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
823 (insert_tbr): New static function.
824 (extract_tbr): New static function.
825 (XFXFXM_MASK, XFXM): Define.
826 (XSPRBAT_MASK, XSPRG_MASK): Define.
827 (powerpc_opcodes): Add instructions to access special registers by
828 name. Add mtcr and mftbu.
830 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
832 * mips-opc.c (P3): Define.
833 (mips_opcodes): Add mad and madu.
835 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
837 * configure.in: Add W65 support.
838 * disassemble.c: Likewise.
839 * w65-opc.h, w65-dis.c: New files.
841 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
843 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
847 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
849 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
851 * arc-opc.c (extract_reladdr): New function.
852 (insert_reladdr): Store address right-shifted by 2.
855 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
857 * mips-opc.c: Add dli as a synonym for li.
860 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
862 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
864 (extraction fns): Insn argument now array of two words. Return pointer
865 to value's table entry. All uses changed.
866 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
867 (insert_multshift, extract_multshift): New fns.
868 (arc_operands): Add support for cache bypass suffix. Add support for
869 predefined aux regs. Modifier bits moved to flags field.
870 (arc_opcodes): Likewise.
871 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
872 New insn rlc. Update to syntax in programmer's manual.
873 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
874 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
876 (arc_opcode_init_tables): New argument to indicate cpu type.
877 (insert_reg): Handle predefined aux regs.
878 (extract_reg): Likewise.
879 (lookup_register): New fn.
880 * arc-dis.c (arc_condition_codes): Deleted.
881 (print_insn_arc): Handle insns with 32 bit immediate constants better.
882 Clean up modifier handling. Handle predefined aux regs.
885 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
887 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
888 print something for reserved opcode values, even if it won't
891 * mips-dis.c (_print_insn_mips): When initializing, shift right
892 and mask, to avoid sign extension problems on the Alpha.
894 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
898 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
900 * configure.in: Add ARC support.
901 * disassemble.c: Likewise.
902 * arc-dis.c, arc-opc.c: New files.
905 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
907 * sh-opc.h (mov.l gbr): Get direction right.
908 * sh-dis.c (print_insn_shx): New function.
909 (print_insn_shl, print_insn_sh): Call print_insn_shx to
910 print opcodes with right byte order.
912 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
914 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
915 to avoid conflicts with getopt.
917 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
919 * hppa-dis.c (print_insn_hppa): Read the instruction using
920 bfd_getb32, so that it works on a little endian or 64 bit host.
921 Remove unused local variable op.
923 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
925 * mips-opc.c: Use or instead of addu for pseudo-op move, since
926 addu does not work correctly if -mips3.
928 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
930 * a29k-dis.c (print_special): Add special register names defined
931 on 29030, 29040 and 29050.
932 (print_insn): Handle new operand type 'I'.
934 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
936 * Makefile.in (INSTALL): Use top level install.sh script.
938 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
940 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
941 that it works on a little endian host.
943 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
945 * configure.in: Use ${config_shell} when running config.bfd.
947 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
949 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
951 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
953 * a29k-dis.c (print_insn): Print the opcode.
955 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
957 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
959 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
961 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
963 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
965 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
966 which store a value into memory.
968 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
970 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
971 * arm-dis.c, arm-opc.h: New files.
973 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
975 * Makefile.in (ns32k-dis.o): Add dependency.
976 * ns32k-dis.c (print_insn_arg): Declare initialized local as
977 string, not as array of chars.
979 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
981 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
983 * sparc-opc.c: Added sparclite extended FP operations, and
984 versions of v9 impdep* instructions permitting specification of
987 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
989 * i960-dis.c (reg_names): Now const.
990 (struct sparse_tabent): New type, copied from array type in mem
992 (ctrl): Local static array ctrl_tab now const.
993 (cobr): Local static array cobr_tab now const.
994 (mem): Local variables reg1, reg2, reg3 now point to const. Local
995 static variable mem_tab no longer explicitly initialized. Changed
996 mem_init to const array of struct sparse_tabent.
997 (reg): Local static variable reg_tab no longer explicitly
998 initialized. Changed reg_init to const array of struct
1000 (ea): Local static array scale_tab now const.
1002 start-sanitize-i960xl
1003 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
1007 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1009 * configure.bat: the disassember needs to be enabled for
1010 "objdump -d" to work in djgpp.
1012 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1014 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1015 (invalid_float): Enabled general version, doesn't require running
1016 on ns32k host. Changed to take char* argument, and test for
1017 explicitly specified sizes, instead of using sizeof() on host CPU
1019 (INVALID_FLOAT): Cast first argument.
1020 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1021 list_P032, list_M032): Now const.
1022 (optlist, list_search): Made appropriate arguments now point to
1024 (print_insn_arg): Changed static array of one-character-string
1025 pointers into a static const array of characters; fixed sprintf
1026 statement accordingly.
1028 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1030 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1031 from distribution. A ns32k-dis.c from a previous distribution has
1032 been brought up to date and supports the new interface.
1034 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1036 * configure.in: add bfd_ns32k_arch target support.
1038 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1039 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1041 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1043 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1046 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1048 * h8300-dis.c, mips-dis.c: Don't use true and false.
1050 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1052 * configure.in: Change --with-targets to --enable-targets.
1054 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1056 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1057 opcodes to the first instruction with that opcode, to speed
1058 disassembly of large files. From ralphc@pyramid.com (Ralph
1061 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1063 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1065 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1067 * configure.bat: update to latest makefile.in
1069 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1071 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1072 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1073 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1074 slot insn is in a delay slot.
1075 * z8k-opc.h: (resflg): Fix patterns.
1076 * h8500-opc.h Fix CR insn patterns.
1078 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1080 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1081 "cmpl" before POWER versions, so that gas -many uses them.
1083 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1085 * disassemble.c: New file.
1086 * Makefile.in (OFILES): Add disassemble.o.
1087 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1088 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1089 binutils/configure.in.
1091 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1092 opcode being examined.
1094 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1096 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1097 (insert_ral, insert_ram, insert_ras): New functions.
1098 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1099 RAS for store with update.
1101 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1103 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1104 (edelsohn@npac.syr.edu).
1106 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1108 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1111 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1113 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1115 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1117 * ppc-opc.c (powerpc_operands): The signedp field has been
1118 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1119 instead. Add new operand SISIGNOPT.
1120 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1121 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1122 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1125 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1127 * i386-dis.c (struct private): Renamed to dis_private. `private'
1128 is a reserved word for dynix cc.
1130 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1132 * configure.in: Change error message to refer to bfd/config.bfd
1133 rather than bfd/configure.in.
1135 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1137 * ppc-opc.c: Define POWER2 as short alias flag.
1138 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1141 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1143 * i960-dis.c (print_insn_i960): Don't read a second word for
1144 opcodes 0, 1, 2 and 3.
1146 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1148 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1150 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1152 * m68881-ext.c: Removed; no longer used.
1153 * Makefile.in: Changed accordingly.
1155 * m68k-dis.c (ext_format_68881): Don't declare.
1156 (print_insn_m68k): If an instruction uses place 'i', it uses at
1157 least four fixed bytes.
1158 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1159 extended float, convert to double using floatformat_to_double, not
1160 ieee_extended_to_double, and fetch the data before converting it.
1162 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1164 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1165 davidj@ICSI.Berkeley.EDU (David Johnson).
1167 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1169 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1170 PowerPC uses bdnz[l][a].
1172 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1174 * dis-buf.c, i386-dis.c: Include sysdep.h.
1176 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1178 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1180 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1181 by Motorola PowerPC 601 with PPC_OPCODE_601.
1182 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1183 Disassemble Motorola PowerPC 601 instructions as well as normal
1184 PowerPC instructions.
1186 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1188 * i960-dis.c (reg, mem): Just use a static array instead of
1191 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1193 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1194 condition name index if this is for a negated condition.
1196 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1197 Floating point format for 'H' operand is backwards from normal
1198 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1199 operands (fmpyadd and fmpysub), handle bizarre register
1200 translation correctly for single precision format.
1202 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1203 or 'I' operands if the next format specifier is 'M' (fcmp
1204 condition completer).
1206 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1208 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1209 single number giving a bitmask for the MB and ME fields of an M
1210 form instruction. Change NB to accept 32, and turn it into 0;
1211 also turn 0 into 32 when disassembling. Seperated SH from NB.
1212 (insert_mbe, extract_mbe): New functions.
1213 (insert_nb, extract_nb): New functions.
1214 (SC_MASK): Mask out SA and LK bits.
1215 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1216 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1217 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1218 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1219 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1220 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1221 (powerpc_macros): Define table of macro definitions.
1222 (powerpc_num_macros): Define.
1224 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1225 if PPC_OPERAND_NEXT is set.
1227 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1229 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1230 char. Retrieve contents using bfd_getl32 instead of shifting.
1232 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1234 * ppc-opc.c: New file. Opcode table for PowerPC, including
1235 opcodes for POWER (RS/6000).
1236 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1237 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1238 (CFILES): Add ppc-dis.c.
1239 (ppc-dis.o, ppc-opc.o): New targets.
1240 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1242 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1244 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1245 No space before 'u', 'f', or 'N'.
1247 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1249 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1250 farther than we should.
1252 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1254 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1256 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1258 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1260 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1261 needs it, to prevent reading past the end of a section.
1263 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1265 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1266 Removed t,A case for la; always use t,A(b) case.
1268 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1270 From Ted Lemen <mellon@pepper.ncd.com>
1271 * mips-dis.c (print_insn_arg): Handle 'k'.
1272 * mips-opc.c: Make cache use k, not t.
1274 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1276 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1277 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1278 FLOAT_FORMAT_CODE to put out floating point register names.
1280 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1282 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1284 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1286 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1288 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1290 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1291 larger than 32. Moved dsxx32 variants first for disassembler.
1293 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1295 * z8kgen.c, z8k-opc.h: Add full lda information.
1297 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1299 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1300 movb instructions. Any necessary space will be emitted by
1301 the code to handle nullification completers.
1303 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1305 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1307 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1309 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1310 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1312 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1314 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1316 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1318 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1319 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1321 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1323 * m88k-dis.c (m88kdis): comment change. Remove space after
1325 (printop): handle new arg types DEC and XREG for m88110.
1327 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1329 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1330 type for absolute branch addresses. Delete special
1331 "ble" and "be" code in 'W' operand code.
1333 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1335 * mips-opc.c: Set hazard information correctly for branch
1336 likely instructions.
1338 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1340 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1341 info->fprintf_func for printing and info->print_address_func for
1344 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1346 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1348 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1350 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1351 Corrected second case of "b" for disassembler.
1353 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1355 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1356 to BFD swapping routines to correspond to BFD name changes.
1358 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1360 * mips-opc.c: Change div machine instruction to be z,s,t rather
1361 than s,t. Change div macro to be d,v,t rather than d,s,t.
1362 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1363 rem and remu which generates only the corresponding div
1364 instruction. This is for compatibility with the MIPS assembler,
1365 which only generates the simple machine instruction when an
1366 explicit destination of $0 is used.
1367 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1369 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1371 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1372 WR_31 hazard for bal, bgezal, bltzal.
1374 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1376 * hppa-dis.c (print_insn_hppa): Use print function
1377 from within the disassemble_info, not fprintf_filtered.
1379 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1381 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1382 Law, law@cs.utah.edu.)
1384 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1386 * mips-opc.c ("absu"): Removed.
1389 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1391 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1392 Changed hazard information to distinguish between memory load
1393 delays and coprocessor load delays.
1395 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1397 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1399 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1401 * configure.in: Don't pass cpu to config.bfd.
1403 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1405 * m88k-dis.c (m88kdis): Make class unsigned.
1407 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1409 * alpha-dis.c (print_insn_alpha): One branch format case was
1410 missing the instruction name.
1412 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1414 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1415 Add the arch-specific auxiliary files.
1416 (OFILES): Remove the arch-specific auxiliary files
1417 and use BFD_MACHINES instead of DIS_LIBS.
1418 * configure.in: Set BFD_MACHINES based on --with-targets option.
1420 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1422 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1425 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1427 * sparc-opc.c: Change CONST to const to deal with gcc
1428 -Dconst=__const -traditional.
1430 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1432 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1433 coprocessor instructions out of #if 0, and made them use new
1436 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1438 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1440 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1442 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1443 instruction, for use by the disassembler.
1445 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1446 hand-coded sign extensions that depended on 32-bit host ints.
1447 FIXME, we still depend on big-endian host bitfield ordering.
1448 (sparc_print_insn): Set the insn_info_valid field, and the
1449 other fields that describe the instruction being printed.
1451 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1453 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1454 `jmp' instead of just one of them.
1456 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1458 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1459 (fput_fp_reg_r): Renamed from fput_reg_r.
1460 (fput_fp_reg): New function.
1461 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1463 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1465 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1467 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1469 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1471 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1472 don't output a space.
1474 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1476 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1478 * mips-opc.c: New file, containing opcode table from
1479 ../include/opcode/mips.h.
1480 * Makefile.in: Add it.
1482 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1484 * m88k-dis.c: New file, moved in from gdb and changed to use the
1485 new dis-asm.h disassembler interface.
1486 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1487 (m88k-dis.o): New target.
1489 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1491 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1492 argument string const char * to correspond to opcode/mips.h.
1494 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1496 * mips-dis.c: Updated to account for name changes in new version
1498 * Makefile.in: Added header file dependencies.
1500 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1502 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1504 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1506 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1507 extend, rather than shifts.
1509 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1511 * Makefile.in: Undo 15 June change.
1513 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1515 * m68k-dis.c (print_insn_arg): Change return value to byte count
1517 * m68k-dis.c: Re-write to detect invalid operands before
1518 printing anything, so we can handle this the same way we
1519 handle invalid opcodes.
1521 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1523 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1525 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1527 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1530 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1532 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1534 * configure.in: Do make sysdep.h link.
1535 * Makefile.in: Search ../include. Don't search ../bfd.
1537 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1539 Changes from Jeff Law, law@cs.utah.edu:
1540 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1541 Do not print a space before the completers specified by
1544 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1546 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1547 defined, since gdb has been fixed.
1549 Changes from Jeff Law, law@cs.utah.edu:
1550 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1551 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1552 be a *disassemble_info, not a *FILE.
1553 * hppa-dis.c: Support 'd', '!', and 'a'.
1554 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1555 * hppa-dis.c: Delete cases which are no longer needed.
1557 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1559 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1561 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1563 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1566 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1568 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1569 * configure.in: No longer need to configure to get sysdep.h.
1571 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1573 * Patches from Jeffrey Law <law@cs.utah.edu>.
1574 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1575 templates for 1.1 FP computational instructions.
1577 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1579 * h8500-dis.c (print_insn_h8500): Address argument is type
1581 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1584 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1585 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1587 * sparc-dis.c (compare_opcodes): Move static declaration to
1590 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1592 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1593 instruction, remove unimp hack from 'l' argument.
1595 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1597 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1600 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1602 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1603 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1606 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1608 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1609 arrays of string pointers to 2-d arrays of chars, to save
1612 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1614 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1615 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1617 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1619 * hppa-dis.c: New file from Utah, adapted to new disassembler
1621 * Makefile.in: Include it.
1623 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1625 * sh-dis.c, sh-opc.h: New files.
1627 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1629 * alpha-dis.c, alpha-opc.h: New files.
1631 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1633 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1636 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1638 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1640 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1642 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1645 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1647 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1648 and double percent signs a few places.
1650 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1652 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1653 Use info->print_address_func not print_address.
1655 * dis-buf.c (generic_print_address): New function.
1657 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1659 * Makefile.in: Add sparc-dis.c.
1660 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1662 Add `add' instruction to the set that get checked
1663 for a preceding `sethi' in order to print an absolute address.
1664 * (print_insn): Disassembly prefers real instructions.
1665 (is_delayed_branch): Speed up.
1666 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1667 Still missing some float ops, and needs testing.
1668 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1669 F_ALIAS. Use printf, not fprintf, when not passing a file
1671 (compare_opcodes): Check that identical instructions have
1672 identical opcodes, complain otherwise.
1675 * Include reg_names.
1677 Use dis-asm.h/read_memory_func interface.
1679 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1681 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1682 deliberately return non-zero to setjmp from longjmp. Otherwise
1683 this code fails to compile.
1685 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1687 * m68k-dis.c: Fix prototype for fetch_arg().
1689 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1691 * dis-buf.c: New file, for new read_memory_func interface.
1692 Makefile.in (OFILES): Include it.
1693 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1694 Use new read_memory_func interface.
1696 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1698 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1699 * h8500-opc.h: Fix couple of opcodes.
1701 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1703 * Makefile.in: add dvi & installcheck targets
1705 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1707 * Makefile.in: Update for h8500-dis.c.
1709 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1711 * h8500-dis.c, h8500-opc.h: New files
1713 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1715 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1716 ../include/dis-asm.h.
1717 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1718 and ../gdb/m68k-pinsn.c).
1719 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1720 and ../gdb/i386-pinsn.c).
1721 * m68881-ext.c: New file. Moved definition of
1722 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1723 * Makefile.in: Adjust for new files.
1724 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1725 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1726 can be dis-assembled.
1728 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1730 * mips-dis.c (print_insn_arg): Now returns void.
1732 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1734 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1735 files that use the macros.
1737 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1739 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1740 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1741 (CFILES): Added mips-dis.c.
1743 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1745 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1746 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1748 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1750 * Makefile.in: Improve *clean rules.
1751 * configure.in: Allow a default host.
1753 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1755 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1756 files include other sysdep files
1758 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1760 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1762 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1764 * configure.in: For host support, use ../bfd/configure.host
1765 so it stays in sync with the ../bfd/hosts database.
1767 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1769 * configure.in: use cpu-vendor-os triple instead of nested cases
1771 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
1773 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1774 *always* the wrong one.
1776 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1778 * z8kgen.c: added copyright info
1780 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1782 * z8k-dis.c (unparse_instr): prettier tabs
1783 * z8kgen.c -> z8k-opc.h: bug fixes in tables
1785 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
1787 * configure.in: Add ncr* configuration.
1788 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
1789 picayune ANSI compilers happy.
1791 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
1793 * configure.in (i386): Make i386 and i486 synonymous for now.
1794 * configure.in (i[34]86-*-sysv4): Add my_host definition.
1796 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1798 * Makefile.in (install): Fix typo.
1800 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
1802 * Makefile.in (make): Remove obsolete crud.
1803 (sparc-opc.o): Avoid Sun Make VPATH bug.
1805 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
1807 * Makefile.in: since there are no SUBDIRS, remove rule and
1808 references of subdir_do.
1810 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1812 * Makefile.in (install): Get the library name right here too.
1813 Don't install bfd.h, since it's unrelated to this library. No
1814 subdirs to recurse into, either.
1815 (CFILES): The source file has a .c suffix, not .o.
1817 * sparc-opc.c: New file, moved from BFD.
1818 * Makefile.in (OFILES): Build it.
1820 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
1822 * z8k-dis.c: fixed forward refferences of some declarations.
1824 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
1826 * Makefile.in: get the name of the library right
1828 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1830 * z8k-dis.c: knows how to disassemble z8k stuff
1831 * z8k-opc.h: new file full of z8000 opcodes
1835 version-control: never