1 1999-01-19 Nick Clifton <nickc@cygnus.com>
3 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
4 offsets as well as symbloic address.
6 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
8 * hppa-dis.c: fix comments and some indentation.
10 1999-01-12 Doug Evans <devans@casey.cygnus.com>
13 * Makefile.am (run-cgen): Pass options to cgen.
14 (stamp-m32r): Build operand instance table.
15 (stamp-fr30,stamp-i960c): Don't build the table.
16 * Makefile.in: Regenerate.
17 * cgen.sh: New arg `options'. Pass to cgen.
19 * fr30-opc.c,i960c-opc.c: Regenerate.
21 1999-01-11 Doug Evans <devans@casey.cygnus.com>
23 * fr30-opc.c: Regenerate.
25 1999-01-06 Doug Evans <devans@casey.cygnus.com>
27 * m32r-dis.c: Regenerate.
30 1999-01-06 Frank Ch. Eigler <fche@cygnus.com>
32 * mips-opc.c (div1): Add three-operand pattern, just like "div".
33 (divu1): Ditto for "divu".
36 1999-01-05 Doug Evans <devans@casey.cygnus.com>
39 * cgen-asm.in (insert_normal): Use CGEN_BOOL_ATTR.
40 * cgen-asm.in (extract_normal): Ditto.
42 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
43 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
44 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
46 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
48 * configure.in: Require autoconf 2.12.1 or higher.
50 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
52 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
54 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
56 * fr30-opc.c: Regenerated.
59 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
61 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
64 1998-12-15 Dave Brolley <brolley@cygnus.com>
66 * fr30-opc.c,fr30-opc.h: Regenerated.
68 1998-12-14 Dave Brolley <brolley@cygnus.com>
70 * fr30-opc.c,fr30-opc.h: Regenerated.
73 1998-12-13 Gavin Romig-Koch <gavin@cygnus.com>
75 * mips-dis.c (set_mips_isa_type): Add bfd_mach_mips4121.
76 (_print_insn_mips): Same.
77 * mips-opc.c: Add vr4121.
80 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
82 * fr30-opc.c,fr30-opc.h: Regenerated.
84 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
86 * m32r-opc.c: Regenerate.
89 Wed Dec 9 14:57:23 1998 Doug Evans <devans@canuck.cygnus.com>
91 * mips-opc.c (mips_builtin_opcodes): Update vmtir syntax.
92 * dvp-opc.c (vu_lower_opcodes): Update mtir entry.
93 (extract_ffstreg): Fix calculation of reg part of returned value.
95 Thu Nov 19 16:38:16 EST 1998 Frank Ch. Eigler <fche@cygnus.com>
97 * mips-opc.c (sync*): Flag these instructions with INSN_SYNC.
99 Wed Jul 29 09:41:19 1998 Frank Ch. Eigler <fche@cygnus.com>
101 * dvp-opc.c (vu_lower_opcodes): Allow ISW, ISWR, MFIR instructions
102 to take multiple destination (xyzw) flags.
104 Thu Jul 23 18:26:49 1998 Frank Ch. Eigler <fche@cygnus.com>
106 * dvp-opc.c (vu_operands): Add UW operand type to force ".w" suffix
107 on ft operand of CLIP.
108 (insert_w): New function for same.
109 (vu_opcodes): Use "broadcast" style argument list for two-operand
110 CLIP insn. Call UW constraint above.
112 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
114 * dvp-dis.c (print_insn): Disassemble DVP_OPERAND_RELOC_11_S4 as
118 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
120 * dis-buf.c (generic_strcat_address): reformat to GNU coding
121 conventions. change sprintf call to an sprintf_vma call.
123 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
125 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
127 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
129 The following changes were made by
130 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
131 David Taylor <taylor@texas.cygnus.com>, and
132 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
133 merge in changes by HP; HP did not create ChangeLog entries.
135 * dis-buf.c (generic_strcat_address): new function.
137 * hppa-dis.c: Changes to improve hppa disassembly.
138 Changed formatting in : reg_names, fp_reg_names,control_reg,
139 New variables : sign_extension_names, deposit_names, conversion_names
140 float_test_names, compare_cond_names_double, add_cond_names_double,
141 logical_cond_names_double, unit_cond_names_double,
142 branch_push_pop_names, saturation_names, shift_names, mix_names,
143 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
144 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
145 (fput_const): renamed as fput_hex_const
147 - use the macros fputs_filtered and
148 fput_decimal_const whenever possible; calls to sign_extend require
149 2 params -- add a missing second param of 0.
150 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
151 architecture version number of current machine. HP folks are
152 trying to handle situation where the target program was compiled
153 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
155 - added new cases : 'g', 'B', 'm'
156 - added cases specifically for PA 2.0
157 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
158 - calls to fput_const become calls to fput_hex_const
160 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
162 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
163 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
164 start-sanitize-cygnus
165 (CLEANFILES): Add stamp-i960.
167 (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
170 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
171 * Makefile.in: Rebuilt.
172 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
174 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
175 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
177 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
179 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
181 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
183 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
185 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
186 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
188 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
190 * fr30-opc.c: Regenerate.
192 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
194 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
196 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
198 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
200 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
202 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
204 1998-11-30 Doug Evans <devans@casey.cygnus.com>
206 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
207 CGEN_INSN_BASE_VALUE.
208 start-sanitize-cygnus
209 * cgen-asm.in (insert_normal): Change start,length to unsigned int.
210 New args word_offset, word_length. Rewrite.
212 (insert_1): Fix lsb0 case.
213 * cgen-dis.in (extract_normal): Change start,length to unsigned int.
214 New args word_offset, word_length. Rewrite.
216 (extract_1): Fix lsb0 case.
217 * cgen-opc.in (FLD): Define.
219 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
220 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
222 start-sanitize-cygnus
223 Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
225 * Makefile.am (CGENFILES): Add rtx-funcs.scm.
226 * Makefile.in: Rebuild.
229 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
231 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
233 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
235 * fr30-asm.c,fr30-dis.c: Regenerated.
237 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
239 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
241 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
243 * fr30-opc.c: Regenerated.
245 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
247 * fr30-opc.c: Regenerated.
248 * fr30-opc.h: Regenerated.
249 * fr30-dis.c: Regenerated.
250 * fr30-asm.c: Regenerated.
252 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
254 * mips-opc.c (sync.p,sync.l): Swap insn values.
256 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
258 * fr30-opc.c: Regenerate.
260 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
262 * fr30-opc.c: Regenerated.
263 * fr30-opc.h: Regenerated.
265 1998-11-18 Doug Evans <devans@casey.cygnus.com>
267 start-sanitize-cygnus
268 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
269 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
271 (insert_insn_normal): Fix typo.
272 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
273 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
274 Rewrite ! CGEN_INT_INSN_P case.
275 (extract_insn_normal): Ditto.
276 (extract_1): New arg `pc'. All callers updated.
277 Replace calls to bfd_getb8.
278 (fill_cache): New fn.
279 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
280 * cgen-opc.in: ... from here.
281 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
283 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
284 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
286 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
288 * fr30-opc.c: Regenerated.
290 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
292 * fr30-opc.c: Regenerated.
293 * fr30-opc.h: Regenerated.
294 * fr30-dis.c: Regenerated.
295 * fr30-asm.c: Regenerated.
297 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
299 * po/opcodes.pot: Regenerated.
300 * fr30-opc.c: Regenerated.
301 * fr30-opc.h: Regenerated.
302 * fr30-dis.c: Regenerated.
303 * fr30-asm.c: Regenerated.
305 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
307 * disassemble.c (disassembler): Add support for FR30 target.
309 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
311 start-sanitize-cygnus
312 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
313 CGEN_OPERAND_SEM_ONLY.
315 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
316 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
318 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
320 * po/opcodes.pot: Regenerate.
321 * po/POTFILES.in: Regenerate.
322 * fr30-opc.c: Regenerate.
323 * fr30-opc.h: Regenerate.
325 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
327 * m32r-asm.c: Regenerate.
329 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
331 * configure.in: Added case for bfd_fr30_arch.
332 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
333 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
334 (CLEANFILES): Added stamp-fr30.
336 * fr30-asm.c: New file.
337 * fr30-dis.c: New file.
338 * fr30-opc.c: New file.
339 * fr30-opc.h: New file.
340 * po/POTFILES.in: Regenerated
341 * po/opcodes.pot: Regenerated
344 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
346 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
347 to bcl8,bncl8 entries.
348 (macro_insn_table_entries): Add FILL_SLOT attribute
349 to bcl8r,bncl8r entries.
352 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
354 * configure.in: detect cygwin* instead of cygwin32*
355 * configure: regenerate
357 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
359 * mips-opc.c (IS_M): Added.
362 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
364 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
368 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
370 start-sanitize-cygnus
371 * cgen-asm.in (insert_1): New function.
372 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
373 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
374 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
375 * cgen-dis.in (extract_1): New function.
376 (extract_normal): buf_ctrl renamed to ex_info, update type.
377 Progress on handling of CGEN_INT_INSN_P.
378 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
379 Update handling of CGEN_INT_INSN_P. Handle errors from
380 @arch@_cgen_extract_operand.
381 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
382 (default_print_insn): Renamed from print_insn.
383 Handle ! CGEN_INT_INSN_P.
384 (print_insn_@arch@): Handle error returns from print_insn.
385 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
386 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
387 (@arch@_cgen_lookup_get_insn_operands): Ditto.
389 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
392 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
394 * m10300-opc.c: Allow autoincrement stores using the same register
395 for source and destination operands.
397 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
399 * m10300-opc.c: DSP instrutions which only write to one general
400 register have no restrictions on matching operands.
402 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
405 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
407 * m32r-opc.h,m32r-opc.c: Regenerate.
410 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
412 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
415 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
417 * i386-dis.c (OP_3DNowSuffix): New static function.
420 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
421 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
422 (insn_codep): New static variable.
423 (print_insn_x86): Init insn_codep after prefixes.
424 (grps): Add GRP14 entries for prefetch, prefetchw.
427 From Jeff B Epler <jepler@usgs.gov>
428 * i386-dis.c (Suffix3DNow): New table.
430 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
432 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
434 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
436 * d10v-dis.c (print_operand): If num is nonzero, then
437 add OPERAND_ACC1, not OPERAND_ACC0.
439 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
441 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
444 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
446 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
450 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
452 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
455 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
457 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
459 1998-09-09 Michael Meissner <meissner@cygnus.com>
461 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
464 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
466 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
468 (print_insn_little_arm): Detect Thumb symbols in elf object
471 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
473 * alpha-dis.c (print_insn_alpha): Use the machine type to
474 decide which PALcode set to include.
476 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
478 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
480 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
482 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
483 MSUB and MSUBS instructions.
486 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
488 * mips-opc.c: Insert contents of vu0.h, rather than including it.
490 * Makefile.am: Rebuild dependencies.
494 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
496 * ppc-opc.c (powerpc_operands): Omit parens around additions in
499 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
501 start-sanitize-coldfire
502 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
503 ColdFire, as below for mulsl and mulul.
505 end-sanitize-coldfire
506 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
507 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
508 +, -, and d for ColdFire.
510 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
511 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
512 (extract_mbe): Likewise.
514 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
516 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
518 * m10300-opc.c: First cut at UDF instructions.
520 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
522 * m32r-opc.c: Regenerate (remove semantic descriptions).
524 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
526 * arm-dis.c (print_insn_big_arm): Fix indentation.
527 (print_insn_little_arm): Likewise.
529 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
531 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
533 (print_insn_little_arm): Likewise.
535 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
537 Move all global state data into opcode table struct, and treat
538 opcode table as something that is "opened/closed".
539 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
540 (cgen_asm_init): Delete.
541 (cgen_set_parse_operand_fn): New function.
542 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
543 (cgen_dis_init): Delete.
544 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
545 (cgen_current_{opcode_table_mach,endian}): Delete.
546 start-sanitize-cygnus
547 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
548 * cgen-dis.in (all fns): Ditto.
549 * cgen-opc.in (all fns): Ditto.
551 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
553 start-sanitize-cygnus
554 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
556 * cgen-dis.in (print_normal): Split into two.
557 (print_address): New function.
558 (extract_insn_normal): Clarify insn_value arg.
559 (print_int_insn): Renamed from print_insn.
560 (print_insn): New arg.
561 (print_insn_@arch@): Open opcode table if not already done so.
562 Move reading of insn into print_insn.
565 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
567 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
571 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
573 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
574 accept an accumulator choice.
575 * m32r-opc.c,m32r-opc.h: Regenerate.
578 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
580 * m10300-opc.c: Add entries for "no_match_operands" field in
584 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
586 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
590 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
592 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
595 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
597 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
599 * m10300-opc.c: Add autoincrement memory loads/stores.
603 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
605 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
606 phmsubh respectively.
609 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
611 start-sanitize-cygnus
612 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
614 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
615 @arch_cgen_get_int_operand.
616 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
617 Update call to @arch@_cgen_insert_operand.
618 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
619 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
620 (extract_insn_normal): New arg `pc', callers updated.
621 Update call to @arch@_cgen_extract_operand.
622 (print_insn): Update call to CGEN_EXTRACT_FN.
624 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
627 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
629 * m10300-opc.c: Fix load to sp and store from sp for the am33.
630 Add more multimedia instructions.
632 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
634 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
639 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
641 * mips-opc.c (pref): Enabled for the r5900.
644 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
646 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
648 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
650 (OP_J): Remove unnecessary subtraction when 16-bit displacement
651 will be masked later.
654 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
656 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
659 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
661 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
662 from raw register #s to symbolic names to make debugging easier.
665 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
667 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
669 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
671 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
672 start-sanitize-cygnus
673 * Makefile.am (CGENDIR): Set via configure.
674 (CGEN): New variable.
675 (CGENFILES): object.scm renamed to cos.scm.
676 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
677 (stamp-m32r): Pass prefix to run-cgen.
678 * Makefile.in: Regenerate.
679 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
680 * cgen-dis.in: Ditto.
681 * cgen-opc.in: Ditto.
682 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
683 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
684 * configure: Regenerate.
688 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
690 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
692 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
694 * m10300-opc.c: Reorder more instructions so that we do not
695 accidentally match a mn10300 instruction when we really
696 wanted an am33 instruction.
699 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
701 * m10300-dis.c: Only recognize instructions from the currently
703 * m10300-opc.c: Add field indicating the particular variant of
704 the mn10300 each instruction is available on.
706 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
708 * configure.in: For bfd_vax_arch, build vax-dis.lo.
709 * Makefile.am: Rebuild dependencies.
710 (CFILES): Add vax-dis.c.
711 (ALL_MACHINES): Add vax-dis.lo.
712 * aclocal.m4: Rebuild with current libtool.
713 * configure, Makefile.in: Rebuild.
715 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
717 * vax-dis.c: New file, from work by Pauline Middelink
718 <middelin@polyware.iaf.nl>.
719 * disassemble.c (ARCH_vax): Define if ARCH_all.
720 (disassembler): Add case for ARCH_vax.
721 * makefile.vms: Support compilation on vms/vax.
724 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
726 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
727 the DVP_OPERAND_RELOC_11_S4 relocation.
731 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
733 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
735 (disassemble): Correctly handle FMT_D10 instructions.
737 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
738 am33 shift instructions.
740 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
742 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
743 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
745 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
746 (mn10300_opcodes): Reorder so as to try and select opcodes from
747 the core chip when multiple alternatives exist. Change several
748 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
749 "macbu" instructions. Fix typos in a couple DSP instructions too.
752 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
754 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
755 related to sign extension and the size of ints.
757 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
759 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
760 instructions. Support (sp) addressing mode by expanding it into
764 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
766 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
767 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
768 be used as immediate values.
772 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
774 * m10300-opc.c: Support 4 byte DSP instructions.
777 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
779 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
782 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
784 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
787 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
789 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
792 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
794 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
795 found on the mn10300.
798 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
800 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
803 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
805 * mips-dis.c (print_insn_little_mips): Previously, instruction
806 printing references the symbol table to determine whether the
807 instruction resides in a block regular instructions or mips16
808 instructions. However, when the disassembler gets used in other
809 environments where the symbol table is not present, we no longer
810 rely in the symbol table, rather, use the low bit of the
811 instructions address to guess. There should be no change for usage
812 of the disassembler in host based programs, gdb, objdump.
813 (print_insn_big_mips): ditto.
814 (print_insn_mips): ditto
816 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
818 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
820 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
823 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
824 operands for the am33.
825 (mn10300_opcodes): Add new instructions from the am33.
827 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
829 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
831 * i386-dis.c (index16): Add '%' to register names. Use ','
834 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
836 * i386-dis.c: Don't print opcode suffix when we can figure out the
837 size (and gas can!) by register operands, or from the default
839 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
841 (dis386, dis386_twobyte, grps): Use new suffix macros.
842 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
843 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
844 order of cmps operands to agree with Intel docs. Correct operand
845 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
846 agree with Intel docs.
847 (print_insn_x86): Print orphan fwait before other prefixes.
848 Return correct byte count for orphan fwait with prefixes. Don't
849 print `bound' operands in reverse order.
850 (ckprefix): Stop accumulating prefixes if we get fwait.
851 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
853 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
855 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
856 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
858 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
860 Fix problems when bfd_vma is wider than long.
861 * i386-dis.c: Make op_address and start_pc unsigned.
862 (set_op): Make parameter unsigned.
863 (print_insn_x86): Cast to bfd_vma when passing a value to
865 * ns32k-dis.c (CORE_ADDR): Don't define.
866 (print_insn_ns32k): Change type of addr to bfd_vma. Use
867 bfd_scan_vma to read back address.
868 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
870 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
871 (NEXTULONG): New definition.
872 (print_insn_m68k): Avoid overflow when computing third argument of
874 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
875 Use disp instead of val to store offset values.
876 (print_indexed): Use base_disp instead of word to store base
877 displacement, to avoid overflow.
878 * m10300-dis.c (disassemble): Cast value to long when computing
879 pc-relative address, to get correct sign extension.
881 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
883 * m32r-opc.c: Regenerate.
885 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
887 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
888 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
890 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
892 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
894 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
896 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
898 (OP_DSreg): Rename from OP_DSSI.
899 (OP_ESreg): Rename from OP_ESDI.
900 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
902 (append_seg): Rename from append_prefix.
903 (ptr_reg): New function.
904 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
906 (PREFIX_ADDR): Rename from PREFIX_ADR.
907 (float_reg): Add non-broken opcodes for people who don't want
910 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
912 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
915 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
917 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
919 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
921 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
922 0; produce error message for shifts of size 32 (or 64 for 64-bit
923 shifts), because the hardware doesn't support them.
926 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
928 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
931 * vu0.h (sqc2): Fix opcode.
933 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
937 start-sanitize-cygnus
938 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
940 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
941 Change pinfo to use WR_HILO.
944 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
946 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
947 LONG_2, LONG_2b formats to use this new operand.
949 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
951 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
953 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
955 * sparc-dis.c (print_insn_sparc): big endian instruction / little
958 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
960 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
961 and SHORT_B3b formats to use Rb instead of Ra.
963 Add FLAG_MUL16 to MUL2XH opcode.
965 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
966 to existing 1.1.1 parallelisation prohibition procedure.
968 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
970 start-sanitize-cygnus
971 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
972 * cgen-dis.in (extract_normal): Likewise.
974 * m32r-asm.c,m32r-dis.c: Regenerate.
977 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
979 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
983 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
985 * mips-opc.c (multu1): Add two operand variant for the r5900.
988 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
990 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
991 with a shift count of 0.
994 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
996 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
998 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
1000 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
1001 (_print_insn_mips): Likewise.
1002 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
1006 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1008 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1009 (cgen_hw_lookup_by_num): New function.
1011 start-sanitize-m32rx
1012 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
1015 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1017 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1019 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1021 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1022 as big-endian on SPARClite.
1024 start-sanitize-m32rx
1025 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
1027 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
1029 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
1033 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1035 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1037 start-sanitize-r5900
1038 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
1040 * mips-opc.c (break): Added 20-bit single-operand break
1041 instruction for R5900 only.
1044 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1046 * po/Make-in (install-info): New target.
1048 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1050 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1051 * configure: Rebuild.
1053 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1055 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1056 variety of ISA2 instructions to set bottom ten bits of trap code.
1058 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1060 * Makefile.am (config.status): Add explicit target so that
1061 config.status depends upon bfd/configure.in.
1062 * Makefile.in: Rebuild.
1064 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1066 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1067 instructions to set bottom ten bits of break code.
1068 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1069 for above optional argument.
1071 start-sanitize-cygnus
1072 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
1074 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
1075 * m32r-opc.h: Regenerate.
1078 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1080 * makefile.vms: Run dec c with /nodebug.
1082 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1084 * Makefile.in: Rebuilt.
1085 * Makefile.am: Regenerated dependencies with mkdep.
1087 * opintl.h (_): Define as dgettext.
1089 start-sanitize-cygnus
1090 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
1092 * configure.in: Add support for --enable-cgen-maint.
1093 * Makefile.am (M32R_DEPS): New variable.
1094 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
1095 * aclocal.m4: Regenerate.
1096 * Makefile.in: Regenerate.
1097 * configure: Regenerate.
1099 * Makefile.am (CGENFILES): Add minsn.scm.
1102 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1104 * cgen-asm.c: Internationalised.
1105 start-sanitize-cygnus
1106 * cgen-asm.in: Internationalised.
1107 * cgen-opc.in: Internationalised.
1109 * m32r-asm.c: Internationalised.
1110 * m32r-dis.c: Internationalised.
1111 * m32r-opc.c: Internationalised.
1113 * aclocal.m4: Regenerated.
1114 * configure: Regenerated.
1115 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1116 * Makefile.in: Rebuild.
1117 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1118 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1120 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1122 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1124 * aclocal.m4, configure: Rebuild with current tools.
1126 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1128 * opintl.h: New file - contains internationalisation macros used
1129 by source files in this directory.
1130 * po/: New subdirectory - contains internationalisation files.
1131 * po/Make-in: New file - Makefile constructor.
1132 * po/POTFILES.in: New file - list of files in opcodes directory
1133 that should be scan for internationalisation macros.
1134 * po/opcodes.pot: New file - list of internationisation strings
1135 found in files mentioned in po/POTFILES.in.
1136 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1137 entry. Add intl directory to include paths.
1138 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1139 HAVE_STRCPY, HAVE_LC_MESSAGES
1140 * configure.in: Add rule to build Makefile in po subdirectory.
1141 * Makefile.in: Rebuilt.
1142 * aclocal.m4: Rebuilt.
1143 * config.in: Rebuilt.
1144 * configure: Rebuilt.
1145 * alpha-opc.c: Internationalised.
1146 * arc-dis.c: Internationalised.
1147 * arc-opc.c: Internationalised.
1148 * arm-dis.c: Internationalised.
1149 * cgen-asm.c: Internationalised.
1150 * d30v-dis.c: Internationalised.
1151 * dis-buf.c: Internationalised.
1153 * dvp-dis.c: Internationalised.
1154 * dvp-opc.c: Internationalised.
1156 * h8300-dis.c: Internationalised.
1157 * h8500-dis.c: Internationalised.
1158 * i386-dis.c: Internationalised.
1159 * m10200-dis.c: Internationalised.
1160 * m10300-dis.c: Internationalised.
1161 * m68k-dis.c: Internationalised.
1162 * m88k-dis.c: Internationalised.
1163 * mips-dis.c: Internationalised.
1164 * ns32k-dis.c: Internationalised.
1165 * opintl.h: Internationalised.
1166 * ppc-opc.c: Internationalised.
1167 * sparc-dis.c: Internationalised.
1168 * v850-dis.c: Internationalised.
1169 * v850-opc.c: Internationalised.
1171 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1173 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1174 (asm_hash_table_entries): New variable.
1175 (cgen_asm_init): Free asm_hash_table_entries.
1176 (hash_insn_array,hash_insn_list): New functions.
1177 (build_asm_hash_table): Use them. Hash macro insns as well.
1178 (cgen_asm_lookup_insn): Update.
1179 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1180 (dis_hash_table_entries): New variable.
1181 (cgen_dis_init): Free dis_hash_table_entries.
1182 (hash_insn_array,hash_insn_list): New functions.
1183 (build_dis_hash_table): Use them. Hash macro insns as well.
1184 (cgen_dis_lookup_insn): Update.
1185 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1186 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1187 (cgen_macro_insn_count): New function.
1188 start-sanitize-cygnus
1189 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
1190 All callers updated. Sanity check result of extract fn.
1191 (@arch@_cgen_get_insn_operands): Change result type to void.
1192 Delete args insn_value, length. New arg fields. All callers updated.
1193 (@arch@_cgen_lookup_get_insn_operands): New function.
1195 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1197 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1199 * i386-dis.c (OP_DSSI): Print segment override.
1201 start-sanitize-r5900
1202 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1204 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
1207 start-sanitize-r5900
1208 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
1210 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
1213 start-sanitize-r5900
1214 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
1216 * vu0.h (vlqd, vlqi): Update per revised specs.
1220 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1222 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1223 (vif_operands): Update.
1224 (vif_get_unpackloc): Delete.
1225 (state_vif_unpackloc{,_star_p}): Delete.
1226 (dvp_opcode_init_parse): Update.
1227 (vif_unpack_len_value): Avoid divide by zero.
1230 start-sanitize-r5900
1231 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1233 * vu0.h: Specs changed for VCALLMSR bit pattern.
1234 * mips-dis.c: (print_insn_arg) Matching change.
1237 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1239 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1242 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1244 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1245 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1246 * configure.in: Define and substitute WIN32LDFLAGS and
1248 * aclocal.m4: Rebuild with new libtool.
1249 * configure, Makefile.in: Rebuild.
1251 start-sanitize-r5900
1252 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1254 * vu0.h: Corrected bit pattern for VMAXI opcode.
1257 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1259 * m32r-opc.c: Regenerate.
1262 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1264 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1265 (dvp_expand_macro): Implement.
1266 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1267 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1270 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1272 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1273 before trying to copy it.
1274 * Makefile.in: Rebuild.
1276 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1278 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1280 start-sanitize-m32rx
1281 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1283 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1286 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1288 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1289 from an arbitrary valid buffer instead of fetching them on demand
1291 (invalid_float): use bit_extract_simple() instead of bit_extract().
1293 start-sanitize-m32rx
1294 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1296 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1297 * m32r-opc.h: Add extra control registers.
1300 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1302 From H.J. Lu <hjl@gnu.org>:
1303 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1306 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1308 * Branched binutils 2.9.
1310 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1312 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1313 disassembling last 4 bytes of a section.
1315 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1317 Fix some gcc -Wall warnings:
1318 * arc-dis.c (print_insn): Add casts to avoid warnings.
1319 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1320 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1322 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1323 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1324 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1325 (parse_ffstreg, parse_vif_mode): Likewise.
1327 * m10200-dis.c (disassemble): Likewise.
1328 * m10300-dis.c (disassemble): Likewise.
1329 * ns32k-dis.c (print_insn_ns32k): Likewise.
1330 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1331 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1332 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1333 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1334 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1336 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1337 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1338 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1340 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1341 start-sanitize-tic80
1342 * tic80-dis.c (print_one_instruction): Likewise.
1344 * w65-dis.c (print_operand): Likewise.
1345 * z8k-dis.c (fetch_data): Likewise.
1346 * a29k-dis.c: Add return type for find_byte_func_type.
1347 * arc-opc.c: Include <stdio.h>. Remove declarations of
1348 insert_multshift and extract_multshift.
1349 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1351 (extract_value): Fully parenthesize expression.
1353 * dvp-opc.c: Include <ctype.h>.
1354 (print_sdest): Add default case to switch.
1356 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1357 * h8500-opc.h (h8500_table): Fully bracket initializer.
1358 * w65-opc.h (optable): Likewise.
1359 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1360 * i386-dis.c (OP_E): Initialize local variables.
1361 * m10200-dis.c (print_insn_mn10200): Likewise.
1362 * mips-dis.c (print_insn_mips16): Likewise.
1363 * sh-dis.c (print_insn_shx): Likewise.
1364 * v850-dis.c (print_insn_v850): Likewise.
1365 * ns32k-dis.c (print_insn_arg): Declare.
1366 (get_displacement, invalid_float): Declare.
1367 (list_search, sign_extend, flip_bytes): Declare return type.
1368 (get_displacement): Likewise.
1369 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1371 (print_insn_ns32k): Make i unsigned.
1372 (invalid_float): Make static. Declare type of val.
1373 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1374 on each for iteration.
1375 * tic30-dis.c (get_indirect_operand): Likewise.
1376 * z8k-dis.c (print_insn_z8001): Declare return type.
1377 (print_insn_z8002): Likewise.
1378 (unparse_instr): Fix sprintf format strings.
1380 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1382 * mips-opc.c: Add "sync.l" and "sync.p".
1385 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1387 * dvp-opc.c (extract_vif_datalen): Rewrite.
1388 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1390 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1392 * dvp-dis.c (print_insn): Print unpack address in hex.
1393 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1394 Don't skip over '*', just record it.
1395 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1396 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1397 Don't skip over '*', just record it.
1398 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1399 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1400 (vif_opcodes): Likewise.
1401 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1402 (vif_macros,vif_macro_count): New globals.
1403 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1404 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1405 (vif_get_wl_cl): New function.
1406 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1409 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1411 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1412 default m68k variant to recognize.
1414 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1415 (ctrl, cobr, mem, ea): Likewise.
1416 (print_addr): Likewise. Remove cast.
1417 (ea): Cast argument of print_addr to bfd_vma.
1419 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1421 (cgen_parse_unsigned_integer): Likewise.
1422 (cgen_parse_address): Likewise.
1424 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1426 * i960-dis.c (ctrl): Add full braces to structure initialization.
1427 (cobr, mem, reg): Likewise.
1428 (ea): Correct parenthesization in expression.
1430 * cgen-asm.c: Include <ctype.h>.
1431 (build_asm_hash_table): Remove unused local variable i.
1432 (cgen_parse_keyword): Add casts to avoid warnings.
1434 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1435 symbol. Fix indentation.
1436 (print_insn_little_arm): Likewise.
1438 start-sanitize-r5900
1439 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1441 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1445 start-sanitize-m32rx
1446 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1448 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1453 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1455 * dvp-opc.c (vif_operand_datalen_special): New global.
1458 start-sanitize-r5900
1459 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1461 * vu0.h (vcallms): Use 'O' for call target operand.
1462 * mips-dis.c (print_insn_arg): Handle 'O'.
1465 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1467 * configure.in: Use AM_DISABLE_SHARED.
1468 * aclocal.m4, configure: Rebuild with libtool 1.2.
1470 start-sanitize-r5900
1471 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1473 * mips-dis.c: Change '%' to '#' in r5900 support.
1477 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1479 These patches are courtesy of Jonathan Walton and Tony Thompson
1480 (athompso@cambridge.arm.com).
1482 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1485 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1486 both the offset and the label closest to the destination.
1488 start-sanitize-r5900
1489 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1491 * vu0.h: New file with cop2/vu0 instructions.
1492 * mips-opc.c: Include vu0.h.
1493 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1495 (print_insn_mips): Do not emit a tab after an instruction if the
1496 first arg is an instruction completer (&). If the next arg is an
1497 escape character (%), then print the next arg verbatim.
1498 * Makefile.am (mips-opc.lo): Depend on vu0.h
1502 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1504 * dvp-opc.c (vif_opcodes): Add stcycl.
1506 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1508 * dvp-dis.c (print_dma): Change length from 16 to 8.
1511 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1513 * m32r-opc.h: Regenerate.
1516 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1518 * dvp-opc.c (print_dest1): Print dest spec again.
1519 (print_vfreg,print_accdest): Likewise.
1520 (vif_unpack_len): Round result up to word boundary.
1523 start-sanitize-vr4320
1524 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1526 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1528 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1530 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1535 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1537 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1538 (print_insn): Do mask comparison on proper opcode word.
1539 Print unsigned values in hex.
1540 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1541 (parse_bc): Catch missing dest.
1542 (parse_vfreg): Replace atoi call with strtol.
1543 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1544 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1545 (extract_gif_eop): New function.
1546 (gif_operands): Update eop entry.
1547 (VGIFOP,VGIFNREGS): Fix calcs.
1548 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1549 (gif_regs): Add entry for unused 11 case.
1550 (print_gif_regs): Print empty list instead of nothing.
1551 (extract_gif_nloop): Fix value calc.
1552 (print_gif_nloop): Always print value, even if 0.
1553 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1554 (vif_operands): Use them for wl,cl fields.
1555 (state_vif_wl,state_vif_cl): New static locals.
1556 (parse_vif_mode): Handle numeric args.
1557 (vif_unpack_len_value,vif_unpack_len): New functions.
1558 (vif_insn_len): Call vif_unpack_len.
1561 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1563 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1565 start-sanitize-cygnus
1566 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1568 * cgen-asm.in: Move insertion of generated routines to top of file.
1569 (insert_normal): Add prototype. Delete `shift' arg.
1570 * cgen-dis.in: Move insertion of generated routines to top of file.
1571 (extract_normal): Add prototype. Delete `shift' arg.
1572 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1573 (print_keyword): Add prototype. Fix type of `attrs' arg.
1576 start-sanitize-vr4320
1577 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1579 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1580 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1583 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1585 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1586 assume that info->symbols is non-empty.
1588 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1590 * alpha-opc.c (cvtqs) There is no such thing.
1591 (cvttq): Missing most of the /*d variants.
1593 start-sanitize-r5900
1594 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1596 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1598 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1599 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1602 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1604 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1605 delayed branches or jumps.
1608 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1610 * dvp-opc.c (vif_operands): Add unpack[u] support.
1611 (vif_opcodes): Ditto.
1612 (*_vif_imrubits): Renamed from *_vif_imrbits.
1614 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1616 * dvp-dis.c (print_insn): Handle word number.
1617 Handle mips address vs vu address.
1618 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1619 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1620 ({insert,extract}_dma_addr): Fix word ofset.
1621 ({insert,print}_gif_regs): Fix encode/decode.
1624 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1626 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1628 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1629 * tic30-dis.c (print_branch): Likewise.
1631 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1632 * dvp-dis.c (dvp_info_mach_type): New function.
1633 (print_insn_dvp): Call it.
1634 (print_vif): Return length of 4 if mpg or direct insn so following
1635 insns get properly disabled.
1636 (print_gif): Fix word order.
1637 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1638 (gif_operands): Fix word order.
1639 (gif_opcodes): Likewise.
1640 ({insert,extract,print}_gif_regs): Likewise.
1641 (gif_regs): Add new register number/name changes.
1642 (dma_opcodes): Add dmarefe insn.
1645 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1647 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1648 saved_symbol code as it is no longer needed.
1650 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1652 * cgen-asm.c: Include symcat.h.
1653 * cgen-dis.c,cgen-opc.c: Ditto.
1654 start-sanitize-cygnus
1655 * cgen-asm.in,cgen-dis.in: Ditto.
1657 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1660 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1662 * dvp-opc.c (extra_dma_flags): Fix typos.
1663 (dma_operands): Fix word numbers.
1664 (dma_opcodes): Likewise.
1665 ({insert,extract}_dma_flags): Likewise.
1668 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1670 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1673 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1675 * dvp-dis.c (print_gif): Complete.
1676 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1677 (state_gif_{nregs,regs,nloop}): New static locals.
1678 (*_gif_*): Complete.
1679 (dvp_opcode_init_{parse,print}): Init gif state locals.
1680 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1681 (vif_insn_len): Handle `unpack'.
1682 ({insert,extract}_dma_flags): Complete.
1685 start-sanitize-r5900
1686 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1688 * mips-opc.c (mula.s): Renamed from multa.s.
1691 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1693 * m32r-opc.[ch]: Regenerate.
1696 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1698 * dvp-opc.c (dma_operands): Rewrite.
1699 (dma_operand_{count,addr}): New globals.
1700 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1701 (insert_dma_addr): Insert value into insn.
1702 (extract_dma_addr): Extract value from insn.
1704 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1706 * dvp-dis.c (print_vu): Handle loi insns.
1707 (print_insn): Likewise.
1708 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1709 (vu_operands): Make LDEST1 a FAKE operand.
1710 (parse_dest1): Allow elided argument.
1711 (print_dest1): Don't print the argument.
1713 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1715 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1716 (print_vfreg): Don't print dest spec.
1717 (parse_accdest): Dest spec is optional.
1718 (print_accdest): Don't print dest spec.
1721 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1723 start-sanitize-cygnus
1724 * Makefile.am (CGENFILES): Update.
1725 * Makefile.in: Regenerate.
1726 * cgen-asm.in (insert_normal): Result is error message now.
1727 Validate value to be inserted.
1728 (insert_insn_normal): Result is error message now.
1729 (@arch@_cgen_assemble_insn): Update.
1731 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1732 arguments. Don't perform validation here.
1733 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1735 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1737 start-sanitize-cygnus
1738 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1739 operand instance list.
1741 * m32r-opc.c: Regenerate.
1743 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1745 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1746 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1748 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1750 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1752 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1754 * configure.in: Get the version number from BFD.
1755 * configure: Rebuild.
1757 From H.J. Lu <hjl@gnu.org>:
1758 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1759 * Makefile.in: Rebuild.
1761 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1763 * m32r-opc.c: Regenerate.
1764 * m32r-opc.h: Regenerate.
1766 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1768 start-sanitize-cygnus
1769 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1770 Ignore ALIAS insns if asked to.
1771 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1773 * m32r-opc.c: Regenerate.
1776 * dvp.opc.c: Nicely format opcode tables.
1777 (vu_operands): New element UFLAGS.
1778 (parse_uflags,print_uflags): New functions.
1779 (vu_upper_opcodes): Add UFLAGS to all insns.
1782 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1784 Fix rac to accept only a0:
1785 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1786 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1787 Introduce OPERAND_GPR.
1788 * d10v-dis.c (print_operand): Likewise.
1790 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1792 start-sanitize-cygnus
1793 * cgen-opc.in: New file.
1794 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1795 * Makefile.am (CGENFILES): Add cgen-opc.in.
1796 * Makefile.in: Regenerate.
1797 * cgen-dis.in (*): Use PTR instead of void *.
1798 (print_insn): Delete unused vars `i', `syntax'.
1800 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1801 (cgen_hw_lookup): Make result const.
1802 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1805 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1807 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1808 (vif_opcodes): Update renamed insns.
1809 * dvp-dis.c (*): Likewise.
1812 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1814 * configure, aclocal.m4: Rebuild with new libtool.
1816 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1818 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1819 instructions use a PC relative branch, not absolute.
1821 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1823 * configure.in: Set libtool_enable_shared rather than
1824 libtool_shared. Remove diversion hack.
1825 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1827 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1829 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1830 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1832 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1834 * tic30-dis.c: New file.
1835 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1836 * configure.in: Handle bfd_tic30_arch.
1837 * Makefile.am: Rebuild dependencies.
1838 (CFILES): Add tic30-dis.c
1839 (ALL_MACHINES): Add tic30-dis.lo.
1840 * configure, Makefile.in: Rebuild.
1842 start-sanitize-m32rx
1843 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1845 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1846 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1847 macwhi-a and macwlo-a instructions.
1851 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1853 * dvp-opc.c, fixed encoding of a bunch of instructions to
1854 be consistent with the asmvu assembler (and inconsistent
1855 with the specification).
1857 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1859 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1860 in the opcode table. The pkemscalf instruction must come first.
1862 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1864 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1867 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1869 * m32r-opc.h (HAVE_CPU_M32R): Define.
1872 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1874 * dvp-dis.c, dvp-opc.c: New files.
1875 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1876 * configure: Regenerate.
1877 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1878 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1879 (mips-dis.lo): Compile with @archdefs@.
1880 * Makefile.in: Regenerate.
1881 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1882 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1885 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1887 * v850-opc.c (insertion routines): If both alignment and size is
1888 wrong then report this.
1890 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1892 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1893 Only recognize instructions for the current target_processor.
1895 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1897 * d10v-dis.c (PC_MASK): Correct value.
1898 (print_operand): If there's a reloc, don't calculate the
1899 address because they could be in different sections.
1901 start-sanitize-cygnus
1902 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1904 * cgen.sh: Rewrite to be like simulator's version.
1905 * Makefile.am (cgen): Update call to cgen.sh.
1906 * Makefile.in: Regenerate
1909 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1911 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1912 instruction after the 4650's "mul" instruction; nobody's using the
1913 4010 these days. If object files someday indicate which processor
1914 variant they're intended for, we can do a better job at this.
1916 start-sanitize-r5900
1917 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1919 * mips-opc.c (c.lt.s): Add r5900 variant.
1923 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1925 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1926 table provided entry size. Use CGEN_INSN_MNEMONIC.
1927 (cgen_parse_keyword): Rewrite.
1928 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1929 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1930 * cgen-opc.c: Clean up pass over `struct foo' usage.
1931 (cgen_keyword_lookup_value): Handle "" entry.
1932 (cgen_keyword_add): Likewise.
1933 start-sanitize-cygnus
1934 * Makefile.am: Add cgen support.
1935 * Makefile.in: Regenerate.
1936 * configure.in: Add cgen support.
1937 * configure: Regenerate.
1938 * aclocal.m4: Regenerate.
1939 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1942 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1944 * mips-opc.c: Add FP_D to s.d instruction flags.
1946 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1948 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1950 start-sanitize-tic80
1951 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1953 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1954 PC relative offset forms before the 15 bit forms. An assembler command
1955 line option now chooses the default.
1958 start-sanitize-r5900
1959 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1961 * mips-opc.c: Add many missing r5900 instructions.
1964 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1966 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1967 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1969 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1971 * configure: Only build libopcodes shared if --enable-shared's value
1972 was `yes', or was set to `*opcodes*'.
1973 * aclocal.m4: Likewise.
1974 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1975 original source of this bit of code. It's not clear what the best fix
1978 start-sanitize-r5900
1979 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1981 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1983 start-sanitize-tic80
1984 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1986 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1987 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1988 offset forms before the 15 bit forms, to default to the long forms.
1991 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1993 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1995 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1997 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1998 symbol if none is present.
1999 (print_insn_big_arm): Prevent examination of stored symbol if
2002 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
2004 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
2006 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
2008 * disassemble.c: Remove disasm_symaddr() function.
2010 * arm-dis.c: Use info->symbol instead of info->flags to determine
2011 if disassmbly should be in Thumb or Arm mode.
2013 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
2015 * arm-dis.c: Add support for disassembling Thumb opcodes.
2016 (print_insn_thumb): New function.
2018 * disassemble.c (disasm_symaddr): New function.
2020 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
2021 (thumb_opcodes): Table of Thumb opcodes.
2023 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2025 * m68k-opc.c (btst): Change Dd@s to Dd;b.
2027 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
2028 and 'v' as operand types.
2030 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
2032 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
2033 <olivier.carmona@di.epfl.ch>.
2034 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
2035 which has a two word opcode with a one word argument.
2037 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
2039 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
2040 unsigned, not signed.
2041 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
2043 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
2045 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
2046 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
2047 (ftrv): Slay the cut-and-paste monster.
2049 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2051 * d10v-dis.c (print_operand):
2052 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
2054 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2056 * d10v-opc.c (OPERAND_FLAG): Split into:
2057 (OPERAND_FFLAG, OPERAND_CFLAG) .
2061 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
2063 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
2064 field for all INSN_MACRO's.
2065 * mips16-opc.c: same
2067 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
2069 * mips-opc.c (sync,cache): These are 3900 insns.
2071 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2073 sh-opc.h (sh_table): Remove ftst/nan.
2075 start-sanitize-cygnus
2076 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
2078 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
2079 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
2081 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
2085 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
2087 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
2088 Add tx49 insns and configury.
2091 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
2093 * mips-opc.c (ffc, ffs): Fix mask.
2095 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2097 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2100 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2102 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2103 start-sanitize-cygnus
2104 Added VR5400 instructions.
2105 (N5): New cpu-id macro.
2107 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2109 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2111 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2112 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2114 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2116 * v850-dis.c (disassemble): Replace // with /* ... */
2118 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2120 * sparc-opc.c: Add wr & rd for v9a asr's.
2121 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2122 (v9a_asr_reg_names): New variable.
2123 Patch from David Miller <davem@vger.rutgers.edu>.
2125 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2127 * sparc-opc.c (v9notv9a): New insn type.
2128 (IMPDEP): Move to the end to not conflict with edge8 et al.
2129 Patch from David Miller <davem@vger.rutgers.edu>.
2131 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2133 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2135 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2137 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2139 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2141 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2142 of disassemble_info structure to determine if an overlay address
2143 has a matching symbol in low memory.
2145 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2146 new symbol_at_address_func field in disassemble_info structure.
2148 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2150 * v850-opc.c (extract_d22): Use signed arithmatic.
2152 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2154 * mips-opc.c: Three op mult is not an ISA insn.
2156 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2158 * mips-opc.c: Fix formatting.
2160 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2162 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2163 than assuming that char is signed. Explicitly sign extend 16 bit
2164 values, rather than assuming that short is 16 bits.
2165 (OP_sI, OP_J, OP_DIR): Likewise.
2167 start-sanitize-v850e
2168 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2170 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2174 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2176 * v850-opc.c: Fix typo in comment.
2178 * v850-dis.c (disassemble): Add test of processor type when
2179 determining opcodes.
2181 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2183 * configure.in: Use a diversion to set enable_shared before the
2184 arguments are parsed.
2185 * configure: Rebuild.
2187 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2189 * m68k-opc.c (TBL1): Use ! rather than `.
2190 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2192 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2194 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2196 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2198 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2201 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2202 * aclocal.m4: Rebuild with new libtool.
2203 * configure: Rebuild.
2205 start-sanitize-v850e
2206 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2208 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2211 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2213 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2215 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2217 * v850-opc.c (v850_opcodes): Further rearrangements.
2219 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2221 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2223 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2225 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2228 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2230 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2232 * mips16-opc.c: Added mips16 sdbbp.
2235 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2237 * v850-opc.c: Initialise processors field of v850_opcode structure.
2239 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2241 Merge changes from Martin Hunt:
2243 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2245 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2246 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2247 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2249 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2251 * d30v-dis.c (print_insn): First operand of d*i (delayed
2252 branch) instructions is relative.
2254 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2255 (d30v_operand_table): Add IMM6S3 type.
2256 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2258 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2259 and cmp instructions.
2261 * d30v-opc.c: Correct entries for repeat*, and sat*.
2262 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2263 types. Correct several formats.
2265 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2267 * d30v-opc.c (pre_defined_registers): Change control registers.
2269 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2270 SHORT_C2. Manual was incorrect.
2272 * d30v-dis.c (lookup_opcode): Return value now indicates
2273 if an opcode has a short and a long form. Used for deciding
2274 to append a ".s" or ".l".
2275 (print_insn): Append a ".s" to an instruction if it is
2276 the short form and ".l" if it is a long form. Do not append
2277 anything if the instruction has only one possible size.
2279 * d30v-opc.c: Change mulx2h to require an even register.
2280 New form: SHORT_A2; a SHORT_A form that needs an even
2281 register as the first operand.
2283 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2284 instruction was not being disassembled if there were an odd
2285 number of instructions.
2287 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2289 start-sanitize-v850e
2290 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2292 * v850-dis.c (disassemble): Improved display of register lists.
2295 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2297 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2298 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2299 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2300 fandnot1s, fandnot2s.
2302 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2304 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2306 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2308 * cgen-asm.c (cgen_parse_address): New argument resultp.
2309 All callers updated.
2310 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2312 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2314 * mn10200-dis.c (disassemble): PC relative instructions are
2315 relative to the next instruction, not the current instruction.
2317 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2319 * v850-dis.c (disassemble): Only signed extend values that are not
2320 returned by extract functions.
2321 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2323 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2325 * v850-opc.c: Update comments. Remove use of
2326 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2328 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2330 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2332 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2334 * configure: Rebuilt with latest devo autoconf for NT support.
2336 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2338 * v850-dis.c (disassemble): Use curly brace syntax for register
2341 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2342 where r0 is being used as a destination register.
2344 start-sanitize-v850e
2345 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2347 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2350 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2352 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2353 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2354 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2355 Add insns to access SGR and DBR.
2356 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2358 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2360 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2362 start-sanitize-v850e
2363 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2365 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2366 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2369 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2371 * configure (cgen_files): Add support for v850e target.
2372 * configure.in (cgen_files): Add support for v850e target.
2374 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2376 * configure (cgen_files): Add support for v850ea target.
2377 * configure.in (cgen_files): Add support for v850ea target.
2380 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2382 * configure.in (bfd_arc_arch): Add.
2383 * configure: Rebuild.
2384 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2385 * Makefile.in: Rebuild.
2386 * arc-dis.c, arc-opc.c: New files.
2387 * disassemble.c (ARCH_all): Define ARCH_arc.
2388 (disassembler): Add ARC support.
2390 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2392 start-sanitize-v850e
2393 * v850-dis.c (disassemble): Add support for v850EA instructions.
2395 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2396 (v850_opcodes): Add v850EA instructions.
2398 * v850-dis.c (disassemble): Add support for v850E instructions.
2400 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2401 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2402 insert_spe, extract_spe): New Functions.
2403 (v850_opcodes): Add v850E instructions.
2406 * v850-opc.c: Reorganised and re-layed out to improve readability
2409 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2411 * configure: Rebuild with autoconf 2.12.1.
2413 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2415 * aclocal.m4, configure: Rebuild with new automake patches.
2417 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2419 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2420 * acinclude.m4: Just include acinclude.m4 from BFD.
2421 * aclocal.m4, configure: Rebuild.
2423 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2425 * Makefile.am: New file, based on old Makefile.in.
2426 * acconfig.h: New file.
2427 * acinclude.m4: New file.
2428 * stamp-h.in: New file.
2429 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2430 Removed shared library handling; now handled by libtool. Replace
2431 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2432 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2433 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2434 handling in AC_OUTPUT.
2435 * dep-in.sed: Change .o to .lo.
2436 * Makefile.in: Now built with automake.
2437 * aclocal.m4: Now built with aclocal.
2438 * config.in, configure: Rebuild.
2440 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2442 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2444 start-sanitize-r5900
2445 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2447 * mips-opc.c: Fix coding of mtsa.
2450 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2452 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2454 * sparc-dis.c (sorted_opcodes): New static local.
2455 (struct opcode_hash): `opcode' is pointer to const element.
2456 (build_hash): First arg is now table of sorted pointers.
2457 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2458 (compare_opcodes): Update.
2460 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2462 * cgen-opc.c: #include <ctype.h>.
2463 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2464 Handle case insensitive hashing.
2465 (hash_keyword_value): Change type of `value' to unsigned int.
2467 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2469 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2470 precision FP, mark it as such. Likewise for double precision
2471 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2473 start-sanitize-r5900
2474 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2477 start-sanitize-r5900
2478 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2480 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2481 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2484 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2486 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2488 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2489 nesting depth when all the macros are expanded.
2491 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2493 * sparc-opc.c: The fcmp v9a instructions take an integer register
2494 as a destination, not a floating point register. From Christian
2495 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2497 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2499 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2500 syntax. From Roman Hodek
2501 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2503 * i386-dis.c (twobyte_has_modrm): Fix pand.
2505 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2507 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2509 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2511 * arm-dis.c: Add prototypes for arm_decode_shift and
2514 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2516 * mips-opc.c: Add r3900 insns.
2518 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2520 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2521 print delay slot instructions on the same line. When using a PC
2522 relative load, add a comment with the value being loaded if it can
2525 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2527 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2528 to pushS/popS for segment regs and byte constant so that
2529 pushw/popw printed when in 16 bit data mode.
2531 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2532 print cbtw, cwtd in 16 bit data mode.
2533 * i386-dis.c (putop): extra case W to support above.
2535 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2536 address size prefix in 16 bit address mode.
2538 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2540 * sh-dis.c: Reindent. Rename local variable fprintf to
2543 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2545 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2547 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2549 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2551 * mips16-opc.c (mip16_opcodes): same.
2553 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2555 * m68k-opc.c (moveb): Change $d to %d.
2557 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2559 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2560 (twobyte_has_modrm): Likewise.
2562 (OP_MMX, OP_EM, OP_MS): New static functions.
2564 * i386-dis.c: Revert patch of April 4. The output now matches
2567 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2569 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2572 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2574 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2576 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2578 * Makefile.in (install): Depend upon installdirs.
2579 (installdirs): New target.
2581 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2583 From Thomas Graichen <graichen@rzpd.de>:
2584 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2585 * configure: Rebuild.
2587 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2589 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2590 Delete string{,s}.h support.
2592 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2594 * cgen-asm.c (cgen_parse_operand_fn): New global.
2595 (cgen_parse_{{,un}signed_integer,address}): Update call to
2596 cgen_parse_operand_fn.
2597 (cgen_init_parse_operand): New function.
2598 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2599 from cgen_asm_init_parse.
2600 (m32r_cgen_assemble_insn): New operand `errmsg'.
2601 Delete call to as_bad, return error message to caller.
2602 (m32r_cgen_asm_hash_keywords): #if 0 out.
2604 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2606 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2608 [case 'J']: Fix typo in register name.
2610 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2612 * configure.in: Substitute SHLIB_LIBS.
2613 * configure: Rebuild.
2614 * Makefile.in (SHLIB_LIBS): New variable.
2615 ($(SHLIB)): Use $(SHLIB_LIBS).
2617 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2619 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2621 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2623 * disassemble.c (disassembler): Handle m32r.
2625 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2627 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2628 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2629 * Makefile.in (CFILES): Add them.
2630 (ALL_MACHINES): Add them.
2631 (dependencies): Regenerate.
2632 * configure.in (cgen_files): New variable.
2633 (bfd_m32r_arch): Add entry.
2634 * configure: Regenerate.
2636 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2638 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2639 * configure: Rebuild.
2641 * Makefile.in: Rebuild dependencies.
2643 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2645 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2648 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2650 * Branched binutils 2.8.
2652 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2654 * m10200-dis.c: Rename from mn10200-dis.c.
2655 * m10200-opc.c: Rename from mn10200-opc.c.
2656 * m10300-dis.c: Rename from mn10300-dis.c
2657 * m10300-opc.c: Rename from mn10300-opc.c.
2658 * Makefile.in: Update accordingly.
2660 * mips16-opc.c: Add mul and dmul macros.
2662 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2664 * makefile.vms: Update CFLAGS, add clean target.
2666 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2668 * mips-opc.c: Add "wait". From Ralf Baechle
2669 <ralf@gnu.ai.mit.edu>.
2671 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2672 * configure, config.in: Rebuild.
2673 * sysdep.h: Include <stdlib.h> if it exists.
2674 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2676 * Makefile.in: Rebuild dependencies.
2678 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2680 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2681 Andrew Bray <andy@madhouse.demon.co.uk>.
2683 * mips-opc.c: Add cast when setting mips_opcodes.
2685 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2687 * v850-dis.c (disassemble): Fix sign extension problem.
2688 * v850-opc.c (extract_d*): Fix sign extension problems to make
2689 disassembly calculate branch offsets correctly.
2691 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2693 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2695 * mips-opc.c: Add dctr and dctw.
2697 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2699 * d30v-dis.c (print_insn): Change the way signed constants
2702 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2704 * Makefile.in (BFD_H): New variable.
2705 (HFILES): New variable.
2706 (CFILES): Add all C files.
2707 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2708 Delete old dependencies, and build new ones.
2709 * dep-in.sed: New file.
2711 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2713 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2715 start-sanitize-coldfire
2716 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2718 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2721 end-sanitize-coldfire
2722 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2724 * mn10200-opc.c: Change "trap" to "syscall".
2725 * mn10300-opc.c: Add new "syscall" instruction.
2727 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2729 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2730 mulul insns on the coldfire.
2732 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2734 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2735 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2736 (print_insn_little_arm): Likewise.
2738 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2740 Based on patches from H.J. Lu <hjl@lucon.org>:
2741 * i386-dis.c (fetch_data): Add prototype.
2742 * m68k-dis.c (fetch_data): Add prototype.
2743 (dummy_print_address): Add prototype. Make static.
2744 * ppc-opc.c (valid_bo): Add prototype.
2745 * sparc-dis.c (build_hash_table): Add prototype.
2746 (is_delayed_branch, compute_arch_mask): Add prototypes.
2747 (print_insn_sparc): Make several local variables const.
2748 (compare_opcodes): Change arguments to const PTR. Add prototype.
2749 * sparc-opc.c (arg): Change name field to be const.
2750 (lookup_name, lookup_value): Add prototypes. Change table and
2751 name parameters to be const.
2752 (sparc_encode_asi): Change name parameter to be const.
2753 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2754 (sparc_encode_sparclet_cpreg): Likewise.
2755 (sparc_decode_asi): Change return type to be const.
2756 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2757 (sparc_decode_sparclet_cpreg): Likewise.
2759 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2761 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2762 Solaris doesn't like the combined options, and the -f is
2764 (stamp-tshlink, install): Likewise.
2766 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2768 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2771 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2773 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2775 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2777 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2780 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2782 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2784 start-sanitize-tic80
2785 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2787 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2789 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2791 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2794 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2796 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2797 floatformat_to_double to make portable.
2798 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2801 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2803 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2804 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2806 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2808 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2809 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2811 start-sanitize-tic80
2812 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2814 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2815 (OFF_SL_BR_SCALED): ... to this, and added the flag
2816 TIC80_OPERAND_BASEREL to the flags word.
2817 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2821 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2823 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2824 Change mips_opcodes from const array to a pointer,
2825 and change bfd_mips_num_opcodes from const int to int,
2826 so that we can increase the size of the mips opcodes table
2829 start-sanitize-tic80
2830 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2832 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2833 store BITNUM values in the table in one's complement form
2834 to match behavior when assembler is given a raw numeric
2835 value for a BITNUM operand.
2836 * tic80-dis.c (print_operand_bitnum): Ditto.
2839 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2841 * d30v-opc.c: Removed references to FLAG_X.
2843 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2845 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2847 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2849 * Makefile.in: Added d30v object files.
2850 * configure: (bfd_d30v_arch) Rebuilt.
2851 * configure.in: (bfd_d30v_arch) Added new case.
2852 * d30v-dis.c: New file.
2853 * d30v-opc.c: New file.
2854 * disassemble.c (disassembler) Add entry for d30v.
2856 start-sanitize-tic80
2857 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2859 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2860 representations for the floating point BITNUM values.
2862 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2864 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2865 in the table in one's complement form, as they appear in the
2867 (tic80_symbol_to_value): Use macros to access predefined
2869 (tic80_value_to_symbol): Ditto.
2870 (tic80_next_predefined_symbol): New function.
2871 * tic80-dis.c (print_operand_bitnum): Remove code that did
2872 one's complement for BITNUM values.
2875 start-sanitize-r5900
2876 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2878 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2881 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2883 * makefile.vms: Remove 8 bit characters. Update to latest
2886 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2888 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2890 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2892 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2893 (IMM24_PCREL): Likewise.
2895 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2897 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2898 address for an extended PC relative instruction that is not a
2901 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2903 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2906 start-sanitize-tic80
2907 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2909 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2910 (tic80_opcodes): Sort entries so that long immediate forms
2911 come after short immediate forms, making it easier for
2912 assembler to select the right one for a given operand.
2915 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2917 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2919 (print_insn_mips16): Likewise.
2921 start-sanitize-r5900
2922 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2924 * mips-opc.c: add r5900.
2927 start-sanitize-tic80
2928 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2930 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2931 a symbol class that restricts translation to just that
2932 class (general register, condition code, etc).
2934 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2936 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2937 and REG_DEST_E for register operands that have to be
2938 an even numbered register. Add REG_FPA for operands that
2939 are one of the floating point accumulator registers.
2940 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2941 (tic80_opcodes): Change entries that need even numbered
2942 register operands to use the new operand table entries.
2943 Add "or" entries that are identical to "or.tt" entries.
2946 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2948 * mips16-opc.c: Add new cases of exit instruction for
2950 * mips-dis.c (print_mips16_insn_arg): Display floating point
2951 registers in operands of exit instruction. Print `$' before
2952 register names in operands of entry and exit instructions.
2954 start-sanitize-tic80
2955 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2957 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2958 pairs for all predefined symbols recognized by the assembler.
2959 Also used by the disassembling routines.
2960 (tic80_symbol_to_value): New function.
2961 (tic80_value_to_symbol): New function.
2962 * tic80-dis.c (print_operand_control_register,
2963 print_operand_condition_code, print_operand_bitnum):
2964 Remove private tables and use tic80_value_to_symbol function.
2967 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2969 * d10v-dis.c (print_operand): Change address printing
2970 to correctly handle PC wrapping. Fixes PR11490.
2972 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2974 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2977 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2979 * mips-dis.c (print_insn_mips16): Set insn_info information.
2980 (print_mips16_insn_arg): Likewise.
2982 * mips-dis.c (print_insn_mips16): Better handling of an extend
2983 opcode followed by an instruction which can not be extended.
2985 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2987 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2988 coldfire moveb instruction to not allow an address register as
2989 destination. Although the documentation does not indicate that
2990 this is invalid, experiments uncovered unexpected behavior.
2991 Added a comment explaining the situation. Thanks to Andreas
2992 Schwab for pointing this out to me.
2994 start-sanitize-tic80
2995 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2997 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2998 entries are presorted so that entries with the same mnemonic are
2999 adjacent to each other in the table. Sort the entries for each
3000 instruction so that this is true.
3003 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3005 * m68k-dis.c: Include <libiberty.h>.
3006 (print_insn_m68k): Sort the opcode table on the most significant
3007 nibble of the opcode.
3009 start-sanitize-tic80
3010 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
3012 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
3013 "vsub", "vst", "xnor", and "xor" instructions.
3014 (V_a1): Renamed from V_a, msb of accumulator reg number.
3015 (V_a0): Add macro, lsb of accumulator reg number.
3017 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
3019 * tic80-dis.c (print_insn_tic80): Broke excessively long
3020 function up into several smaller ones and arranged for
3021 the instruction printing function to be callable recursively
3022 to print vector instructions that have both a load and a
3023 math instruction packed into a single opcode.
3024 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
3025 to explain why it comes after the other vector opcodes.
3028 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
3030 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
3031 move insns to handle immediate operands.
3033 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3035 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
3036 fix operand mask in the "moveml" entries for the coldfire.
3038 start-sanitize-tic80
3039 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
3041 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
3042 New macros for building vector instruction opcodes.
3043 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
3044 FMT_LI, which were unused. The field is now a flags field.
3045 Remove some opcodes that are possible, but illegal, such
3046 as long immediate instructions with doubles for immediate
3047 values. Add "vadd" and "vld" instructions.
3049 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
3051 * tic80-opc.c (tic80_operands): Reorder some table entries to make
3052 the order more logical. Move the shift alias instructions ("rotl",
3053 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
3054 interspersed with the regular sr.x and sl.x instructions. Add
3055 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
3056 "sub", "subu", "swcr", and "trap".
3058 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
3060 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
3061 (OFF_SL_PC): Renamed from OFF_SL.
3062 (OFF_SS_BR): New operand type for base relative operand.
3063 (OFF_SL_BR): New operand type for base relative operand.
3064 (REG_BASE): New operand type for base register operand.
3065 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
3066 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
3067 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
3069 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
3070 10 char field, padded with spaces on rhs, rather than a string
3071 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
3072 than old TIC80_OPERAND_RELATIVE. Add support for new
3073 TIC80_OPERAND_BASEREL flag bit.
3075 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
3077 * tic80-dis.c (print_insn_tic80): Print floating point operands
3079 * tic80-opc.c (SPFI): Add single precision floating point
3080 immediate operand type.
3081 (ROTATE): Add rotate operand type for shifts.
3082 (ENDMASK): Add for shifts.
3083 (n): Macro for the 'n' bit.
3084 (i): Macro for the 'i' bit.
3085 (PD): Macro for the 'PD' field.
3086 (P2): Macro for the 'P2' field.
3087 (P1): Macro for the 'P1' field.
3088 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
3092 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
3094 * mn10200-dis.c (disassemble): Mask off unwanted bits after
3095 adding in current address for pc-relative operands.
3097 start-sanitize-tic80
3098 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3100 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3101 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3102 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3103 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3104 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3105 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3106 (REG_SCALED, LSI_SCALED): New operand types.
3107 (E): New macro for 'E' bit at bit 27.
3108 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3109 opcodes, including the various size flavors (b,h,w,d) for
3110 the direct load and store instructions.
3112 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3114 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3116 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3117 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3118 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3119 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3120 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3121 masks with "MASK_* & ~M_*" to get the M bit reset.
3122 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3124 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3126 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3127 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3128 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3130 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3131 CC, SICR, and LICR table entries.
3132 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3133 "bcnd", and "brcr" opcodes.
3136 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3138 * ppc-opc.c (powerpc_operands): Make comment match the
3139 actual fields (no shift field).
3140 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3141 start-sanitize-tic80
3142 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3143 partial implementation, work in progress.
3144 * tic80-opc.c (tic80_operands): Begin construction operands table.
3145 (tic80_opcodes): Continue populating opcodes table and start
3146 filling in the operand indices.
3147 (tic80_num_opcodes): Add this.
3150 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3152 * m68k-opc.c: Add #B case for moveq.
3154 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3156 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3157 before they are used.
3159 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3161 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3162 for "breakpoint" instruction.
3164 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3166 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3167 (dep): Use ALL_CFLAGS rather than CFLAGS.
3169 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3171 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3174 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3176 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3177 start-sanitize-tic80
3178 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3181 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3183 * mips16-opc.c: Add "abs".
3185 start-sanitize-tic80
3186 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3188 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3189 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3190 (disassembler): Add bfd_arch_tic80 support to set disassemble
3191 to print_insn_tic80.
3192 * tic80-dis.c (print_insn_tic80): Add stub.
3194 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3196 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3197 * configure: Regenerate with autoconf.
3198 * tic80-dis.c: Add file.
3199 * tic80-opc.c: Add file.
3202 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3204 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3206 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3208 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3209 (mn10200_opcodes): Use it for some logicals and btst insns.
3210 Add "break" and "trap" instructions.
3212 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3214 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3216 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3218 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3219 relative load or add now depends upon whether the instruction is
3222 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3224 * mn10200-dis.c: Finish writing disassembler.
3225 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3226 Fix mask for "jmp (an)".
3228 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3229 handle endianness issues for mn10300.
3231 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3233 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3235 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3236 instruction. Fix opcode field for "movb (imm24),dn".
3238 * mn10200-opc.c (mn10200_operands): Fix insertion position
3241 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3243 * mn10200-opc.c: Create mn10200 opcode table.
3244 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3245 but moving along nicely.
3247 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3249 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3251 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3253 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3254 specifiers for fmovem* instructions.
3256 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3258 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3260 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3262 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3265 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3267 * mn10300-opc.c: Add some comments explaining the various
3270 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3272 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3274 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3277 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3278 operand specifiers in fmovm* instructions.
3280 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3282 * ppc-opc.c (insert_li): Give an error if the offset has the two
3283 least significant bits set.
3285 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3287 * mips-dis.c (print_insn_mips16): Separate the instruction from
3288 the arguments with a tab, not a space.
3290 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3292 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3295 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3298 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * configure: Rebuild with autoconf 2.12.
3302 Add support for mips16 (16 bit MIPS implementation):
3303 * mips16-opc.c: New file.
3304 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3305 (mips16_reg_names): New static array.
3306 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3307 after seeing a 16 bit symbol.
3308 (print_insn_little_mips): Likewise.
3309 (print_insn_mips16): New static function.
3310 (print_mips16_insn_arg): New static function.
3311 * mips-opc.c: Add jalx instruction.
3312 * Makefile.in (mips16-opc.o): New target.
3313 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3314 * configure: Rebuild.
3316 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3318 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3319 operand specifiers in *save, *restore and movem* instructions.
3321 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3324 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3325 register operands for immediate arithmetic, not, neg, negx, and
3326 set according to condition instructions.
3328 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3329 specifier of the effective-address operand in immediate forms of
3330 arithmetic instructions. The specifier for the immediate operand
3331 notes how and where the constant will be stored.
3333 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3335 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3338 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3341 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3343 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3345 * mn10300-dis.c (disassemble): Handle register lists.
3347 * mn10300-opc.c: Fix handling of register list operand for
3348 "call", "ret", and "rets" instructions.
3350 * mn10300-dis.c (disassemble): Print PC-relative and memory
3351 addresses symbolically if possible.
3352 * mn10300-opc.c: Distinguish between absolute memory addresses,
3353 pc-relative offsets & random immediates.
3355 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3357 (disassemble): Handle SPLIT and EXTENDED operands.
3359 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3361 * mn10300-dis.c: Rough cut at printing some operands.
3363 * mn10300-dis.c: Start working on disassembler support.
3364 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3366 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3368 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3370 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3372 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3374 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3376 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3377 register argument is calls and jmp instructions.
3379 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3381 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3382 getx operand. Fix opcode for mulqu imm,dn.
3384 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3386 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3387 in MN10300_OPERAND_SPLIT operands for how many bits
3388 appear in the basic insn word. Add IMM32_HIGH24,
3389 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3390 (mn10300_opcodes): Use new operands as needed.
3392 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3393 for bset, bclr, btst instructions.
3394 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3396 * mn10300-opc.c (mn10300_operands): Remove many redundant
3397 operands. Update opcode table as appropriate.
3398 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3399 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3401 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3403 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3404 operands (for indexed load/stores). Fix bitpos for DI
3405 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3406 few instructions that insert immediates/displacements in the
3407 middle of the instruction. Add IMM8E for 8 bit immediate in
3408 the extended part of an instruction.
3409 (mn10300_operands): Use new opcodes as appropriate.
3411 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3413 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3414 sequential so the assembler never parallelizes it with
3417 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3419 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3420 a data/address register that appears in register field 0
3421 and register field 1.
3422 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3424 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3426 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3427 standard disassembly.
3429 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3430 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3431 Recategorize PALcode instructions.
3433 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3435 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3437 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3439 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3440 there are no operand types.
3442 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3444 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3446 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3448 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3450 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3452 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3454 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3455 and sst.w instructions.
3457 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3460 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3462 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3465 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3467 * ppc-opc.c (PPCPWR2): Define.
3468 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3471 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3473 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3474 field for movhu instruction.
3476 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3477 cast value to "long" not "signed long" to keep hpux10
3480 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3482 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3485 * mn10300-opc.c (FMT*): Remove definitions.
3487 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3488 for shift-by-register opcodes.
3490 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3491 into [AD][MN][01] for encoding the position of the register
3494 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3496 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3497 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3499 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3501 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3502 Fix various typos. Add "PAREN" operand.
3503 (MEM, MEM2): Define.
3504 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3505 operands. Fix several typos.
3507 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3510 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3512 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3513 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3515 (mn10300_opcodes): Break opcode format out into its own field.
3516 Update many operand fields to deal with signed vs unsigned
3517 issues. Fix one or two typos in the "mov" instruction
3518 opcode, mask and/or operand fields.
3520 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3522 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3523 m68851 wasn't reset.
3525 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3527 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3528 all opcodes. Very rough cut at operands for all opcodes.
3530 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3533 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3535 * mn10200-opc.c, mn10300-opc.c: New files.
3536 * mn10200-dis.c, mn10300-dis.c: New files.
3537 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3538 * disassemble.c: Break mn10x00 support into 10200 and 10300
3540 * configure.in: Likewise.
3541 * configure: Rebuilt.
3543 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3545 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3547 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3549 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3551 * disassemble (ARCH_mn10x00): Define.
3552 (disassembler): Handle bfd_arch_mn10x00.
3553 * configure.in: Recognize bfd_mn10x00_arch.
3554 * configure: Rebuilt.
3556 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3558 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3559 accordingly. Don't declare functions using op_rtn.
3561 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3563 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3564 params to be more standard.
3565 * (disassemble): Print absolute addresses and symbolic names for
3566 branch and jump targets.
3567 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3569 * (v850_opcodes): Add breakpoint insn.
3571 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3573 * m68k-opc.c: Move the fmovemx data register cases before the
3574 other cases, so that they get recognized before the data register
3575 does gets treated as a degenerate register list.
3577 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3579 * mips-opc.c: Add a case for "div" and "divu" with two registers
3580 and a destination of $0.
3582 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3584 * mips-dis.c (print_insn_arg): Add prototype.
3585 (_print_insn_mips): Ditto.
3587 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3589 * mips-dis.c (print_insn_arg): Print condition code registers as
3592 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3594 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3596 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3598 * v850-dis.c (disassemble): Make static. Provide prototype.
3600 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3602 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3605 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3607 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3608 ']' characters into the output stream.
3609 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3610 Add "memop" field to all opcodes (for the disassembler).
3611 Reorder opcodes so that "nop" comes before "mov" and "jr"
3612 comes before "jarl".
3614 * v850-dis.c (print_insn_v850): Fix typo in last change.
3616 * v850-dis.c (print_insn_v850): Properly handle disassembling
3617 a two byte insn at the end of a memory region when the memory
3618 region's size is only two byte aligned.
3620 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3622 * v850-dis.c (v850_reg_names): Define.
3623 (v850_sreg_names, v850_cc_names): Likewise.
3624 (disassemble): Very rough cut at printing operands (unformatted).
3626 * v850-opc.c (BOP_MASK): Fix.
3627 (v850_opcodes): Fix mask for jarl and jr.
3629 * v850-dis.c: New file. Skeleton for disassembler support.
3630 * Makefile.in Remove v850 references, they're not needed here.
3631 * configure.in: Add v850-dis.o when building v850 toolchains.
3632 * configure: Rebuilt.
3633 * disassemble.c (disassembler): Call v850 disassembler.
3635 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3636 (insert_d8_6, extract_d8_6): New functions.
3637 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3638 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3640 (IF4A, IF4B): Use "D7" instead of "D7S".
3641 (IF4C, IF4D): Use "D8_7" instead of "D8".
3642 (IF4E, IF4F): New. Use "D8_6".
3643 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3644 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3646 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3647 (v850_operands): Change D16 to D16_15, use special insert/extract
3648 routines. New new D16 that uses the generic insert/extract code.
3649 (IF7A, IF7B): Use D16_15.
3650 (IF7C, IF7D): New. Use D16.
3651 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3653 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3654 message. Issue an error if the branch offset is odd.
3656 * v850-opc.c: Add notes about needing special insert/extract
3657 for all the load/store insns, except "ld.b" and "st.b".
3659 * v850-opc.c (insert_d22, extract_d22): New functions.
3660 (v850_operands): Use insert_d22 and extract_d22 for
3662 (insert_d9): Fix range check.
3664 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3666 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3667 and set bits field to D9 and D22 operands.
3669 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3671 * v850-opc.c (v850_operands): Define SR2 operand.
3672 (v850_opcodes): "ldsr" uses R1,SR2.
3674 * v850-opc.c (v850_opcodes): Fix opcode specs for
3675 sld.w, sst.b, sst.h, sst.w, and nop.
3677 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3679 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3680 end of the opcode table.
3682 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3684 * d10v-opc.c (pre_defined_registers): Added register pairs,
3685 "r0-r1", "r2-r3", etc.
3687 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3689 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3690 Create I16U for an unsigned 16bit mmediate operand.
3691 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3693 * v850-opc.c (v850_operands): Define EP operand.
3694 (IF4A, IF4B, IF4C, IF4D): Use EP.
3696 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3697 with immediate operand, "movhi". Tweak "ldsr".
3699 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3700 correct. Get sld.[bhw] and sst.[bhw] closer.
3702 * v850-opc.c (v850_operands): "not" is a two byte insn
3704 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3706 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3708 * v850-opc.c (two): Get order of words correct.
3710 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3712 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3713 register source and destination operands.
3714 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3716 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3717 same thinko in "trap" opcode.
3719 * v850-opc.c (v850_opcodes): Add initializer for size field
3722 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3723 Add D8 for 8-bit unsigned field in short load/store insns.
3724 (IF4A, IF4D): These both need two registers.
3725 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3726 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3727 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3728 for "ldsr" and "stsr".
3729 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3732 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3733 short store word (sst.w).
3735 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3737 * v850-opc.c (v850_operands): Added insert and extract fields,
3738 pointers to functions that handle unusual operand encodings.
3740 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3742 * v850-opc.c (v850_opcodes): Enable "trap".
3744 * v850-opc.c (v850_opcodes): Fix order of displacement
3745 and register for "set1", "clr1", "not1", and "tst1".
3747 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3749 * v850-opc.c (v850_operands): Add "B3" support.
3750 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3753 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3755 * v850-opc.c: Close unterminated comment.
3757 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3759 * v850-opc.c (v850_operands): Add flags field.
3760 (v850_opcodes): add move opcodes.
3762 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3764 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3765 * configure: (bfd_v850v_arch) Add new case.
3766 * configure.in: (bfd_v850_arch) Add new case.
3767 * v850-opc.c: New file.
3769 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3771 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3773 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3775 * d10v-opc.c: Add additional information to the opcode
3776 table to help determinine which instructions can be done
3779 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3781 * mpw-make.sed: Update editing of include pathnames to be
3784 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3786 * arm-opc.h: Added "bx" instruction definition.
3788 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3790 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3792 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3794 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3796 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3798 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3800 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3802 * makefile.vms: Update for alpha-opc changes.
3804 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3806 * i386-dis.c (print_insn_i386): Actually return the correct value.
3807 (ONE, OP_ONE): #ifdef out; not used.
3809 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3811 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3812 Changed subi operand type to treat 0 as 16.
3814 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3816 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3819 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3821 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3822 memory transfer instructions. Add new format string entries %h and %s.
3823 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3826 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3828 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3829 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3831 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3833 * alpha-dis.c (print_insn_alpha_osf): Remove.
3834 (print_insn_alpha_vms): Remove.
3835 (print_insn_alpha): Make globally visible. Chose the register
3836 names based on info->flavour.
3837 * disassemble.c: Always return print_insn_alpha for the alpha.
3839 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3841 * d10v-dis.c (dis_long): Handle unknown opcodes.
3843 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3845 * d10v-opc.c: Changes to support signed and unsigned numbers.
3846 All instructions with the same name that have long and short forms
3847 now end in ".l" or ".s". Divs added.
3848 * d10v-dis.c: Changes to support signed and unsigned numbers.
3850 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3852 * d10v-dis.c: Change all functions to use info->print_address_func.
3854 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3856 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3857 move ccr/sr insns more strict so that the disassembler only
3858 selects them when the addressing mode is data register.
3860 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3861 * d10v-opc.c (pre_defined_registers): Declare.
3862 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3863 to pick a better name for the registers.
3865 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3867 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3868 operands for fexpand and fpmerge. From Christian Kuehnke
3869 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3871 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3873 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3874 print routine. Take new regnames and cpumask arguments.
3875 Kill the environment variable nonsense.
3876 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3877 (print_insn_alpha_vms): New function. Do VMS style regnames.
3878 * disassemble.c (disassembler): Test bfd flavour to pick
3879 between OSF and VMS routines. Default to OSF.
3881 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3883 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3884 * configure: Rebuild.
3885 * Makefile.in (install): Use @INSTALL_SHLIB@.
3887 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3889 * configure: (bfd_d10v_arch) Add new case.
3890 * configure.in: (bfd_d10v_arch) Add new case.
3891 * d10v-dis.c: New file.
3892 * d10v-opc.c: New file.
3893 * disassemble.c (disassembler) Add entry for d10v.
3895 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3897 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3898 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3900 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3902 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3903 distinguish between variants of the instruction set.
3904 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3905 distinguish between variants of the instruction set.
3907 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3909 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3910 the 8086 instruction set.
3911 * i386-dis.c: General cleanups. Make most things static. Add
3912 prototypes. Get rid of static variables aflags and dflags. Pass
3913 them as args (to almost everything).
3915 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3917 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3919 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3921 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3922 if the next arg is marked with SRC_IN_DST. Gross.
3924 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3925 we're looking for and find EXR.
3927 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3928 if we're looking for KBIT and we don't find it.
3930 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3933 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3934 3bit immediate operands.
3936 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3938 * Released binutils 2.7.
3940 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3941 <kkaempf@progis.ac-net.de>.
3943 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3945 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3947 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3949 * sparc-dis.c (print_insn_sparclite): New routine to print
3950 sparclite instructions.
3952 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3954 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3956 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3958 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3959 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3960 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3962 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3964 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3965 Use autoconf-set values.
3966 (docdir, oldincludedir): Removed.
3967 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3969 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3971 * alpha-opc.c: New file.
3972 * alpha-opc.h: Remove.
3973 * alpha-dis.c: Complete rewrite to use new opcode table.
3974 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3975 * configure: Rebuild with autoconf 2.10.
3976 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3977 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3979 (alpha-opc.o): New target.
3981 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3983 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3984 Set imm_added_to_rs1 even if the source and destination register
3987 * sparc-opc.c: Add some two operand forms of the wr instruction.
3989 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3991 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3994 * disassemble.c (disassembler): Handle H8/S.
3995 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3997 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3999 * sparc-opc.c: Add beq/teq as aliases for be/te.
4001 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
4002 <sergei@msil.sps.mot.com>.
4004 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
4006 * makefile.vms: New file.
4008 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
4010 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
4012 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
4015 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
4017 * i386-dis.c (OP_OFF): Call append_prefix.
4019 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4021 * ppc-opc.c (instruction encoding macros): Add explicit casts to
4022 unsigned long to silence a warning from the Solaris PowerPC
4025 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
4027 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
4029 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
4031 * sparc-dis.c (X_IMM,X_SIMM): New macros.
4033 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
4034 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
4035 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
4036 cpush, cpusha, cpull sparclet insns.
4038 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
4040 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
4042 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
4044 * sparc-opc.c: Set F_FBR on floating point branch instructions.
4045 Set F_FLOAT on other floating point instructions.
4047 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4049 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
4051 (powerpc_opcodes): Add 860/821 specific SPRs.
4053 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
4055 * configure.in: Permit --enable-shared to specify a list of
4056 directories. Set and substitute BFD_PICLIST.
4057 * configure: Rebuild.
4058 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
4059 uses. Set to @BFD_PICLIST@.
4061 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
4063 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
4064 not "abs", which may be needed for the absolute in something
4065 like btst #0,@10:8. Print L_3 immediates separately from other
4066 immediates. Change ABSMOV reference to ABS8MEM.
4068 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
4070 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
4071 (current_arch_mask): New static global.
4072 (compute_arch_mask): New static function.
4073 (print_insn_sparc): Delete sparc_v9_p. New static local
4074 current_mach. Resort opcode table if current_mach changes.
4075 Generalize "insn not supported" test.
4076 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
4077 Delete test for v9/!v9.
4078 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
4080 (brfc): Split into CBR and FBR for coprocessor/fp branches.
4081 (brfcx): Renamed to FBRX.
4082 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
4083 coprocessor mnemonics are not supported on the sparclet).
4084 (condf): Renamed to CONDF.
4085 (SLCBCC2): Delete F_ALIAS flag.
4087 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
4089 * sparc-opc.c (sparc_opcodes): rd must be 0 for
4090 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
4092 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
4094 * Makefile.in (config.status): Depend upon BFD VERSION file, so
4095 that the shared library version number is set correctly.
4097 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4099 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4100 Miles Bader <miles@gnu.ai.mit.edu>.
4101 * configure: Rebuild.
4103 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4105 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4108 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4110 * configure: Rebuild with autoconf 2.8.
4112 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4114 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4115 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4117 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4119 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4120 since they appear as targets in Makefile.in.
4121 * configure: Rebuild.
4123 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4125 * mpw-make.sed: Edit out shared library support bits.
4127 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4129 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4130 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4131 (sparc_opcodes): Add sparclet insns.
4132 (sparclet_cpreg_table): New static local.
4133 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4134 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4136 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4138 * i386-dis.c (index16): New static variable.
4139 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4141 (OP_indirE): Return result of OP_E.
4142 (OP_E): Check for 16 bit addressing mode, and disassemble
4143 correctly. Optimised 32 bit case a little. Don't print
4144 "(base,index,scale)" when sib specifies only an offset.
4146 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4148 * configure.in: Set and substitute SHLIB_DEP.
4149 * configure: Rebuild.
4150 * Makefile.in (SHLIB_DEP): New variable.
4151 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4152 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4153 COMMON_SHLIB, add them to piclist with appropriate modifications.
4154 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4155 here: just use piclist.
4157 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4159 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4160 (print_insn_sparc): Rewrite v9/not-v9 tests.
4161 (compare_opcodes): Likewise.
4162 * sparc-opc.c (MASK_<ARCH>): Define.
4163 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4164 (sparclet,v6notv9): Define.
4165 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4166 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4168 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4170 * configure.in: Call AC_PROG_CC before configure.host.
4171 * configure: Rebuild.
4173 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4175 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4177 * i386-dis.c (onebyte_has_modrm): New static array.
4178 (twobyte_has_modrm): New static array.
4179 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4181 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4183 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4186 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4188 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4191 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4193 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4194 m68010up, not just m68020up | cpu32.
4196 * Makefile.in (SONAME): New variable.
4197 ($(SHLINK)): Make a link to the transformed name, as well.
4198 (stamp-tshlink): New target.
4199 (install): Skip stamp-tshlink during install.
4201 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4203 * configure.in: Call AC_ARG_PROGRAM.
4204 * configure: Rebuild.
4205 * Makefile.in (program_transform_name): New variable.
4206 (install): Transform library name before installing it.
4208 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4210 * i960-dis.c (mem): Add HX dcinva instruction.
4212 Support for building as a shared library, based on patches from
4213 Alan Modra <alan@spri.levels.unisa.edu.au>:
4214 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4215 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4216 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4217 * configure: Rebuild.
4218 * Makefile.in (ALLLIBS): New variable.
4219 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4220 (COMMON_SHLIB, SHLINK): New variables.
4221 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4222 (STAGESTUFF): Remove variable.
4223 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4224 (stamp-piclist, piclist): New targets.
4225 ($(SHLIB), $(SHLINK)): New targets.
4226 ($(OFILES)): Depend upon stamp-picdir.
4227 (disassemble.o): Build twice if PICFLAG is set.
4228 (MOSTLYCLEAN): Add pic/*.o.
4229 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4230 (distclean): Remove pic and stamp-picdir.
4231 (install): Install shared libraries.
4232 (stamp-picdir): New target.
4234 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4236 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4237 Print unknown instruction as "unknown", rather than in hex.
4239 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4241 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4243 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4245 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4247 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4249 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4250 when necessary. From Ulrich Drepper
4251 <drepper@myware.rz.uni-karlsruhe.de>.
4253 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4255 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4256 sparc_num_opcodes. Update architecture enum values.
4257 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4258 (sparc_opcode_lookup_arch): New function.
4259 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4260 (sparc_opcodes): Add v9a shutdown insn.
4262 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4264 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4265 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4267 (print_insn_sparc64): Deleted.
4268 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4271 * sparc-opc.c (architecture_pname): Add v9a.
4273 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4275 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4276 incorrectly defined as 0x16 when it should be 0x15.
4277 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4278 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4279 excb (exception barrier) which is defined in the Alpha
4280 Architecture Handbook version 2.
4281 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4282 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4283 disassembled as or, for example.
4285 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4287 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4288 (_print_insn_mips): Change i from int to unsigned int.
4290 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4292 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4293 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4295 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4297 * i386-dis.c: Added Pentium Pro instructions.
4299 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4301 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4304 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4306 * sh-opc.h (sh_nibble_type): Added REG_B.
4307 (sh_arg_type): Added A_REG_B.
4308 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4310 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4312 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4314 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4316 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4318 * Makefile.in (distclean): Remove stamp-h. From Ronald
4319 F. Guilmette <rfg@monkeys.com>.
4321 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4323 From David Mosberger-Tang <davidm@azstarnet.com>:
4324 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4327 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4329 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4330 (sh_table): Added many SH3 opcodes.
4331 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4333 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4335 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4336 (subco,subco.): Mark this PPC, not PPCCOM.
4338 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4340 * configure: Rebuild with autoconf 2.7.
4342 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4344 * configure: Rebuild with autoconf 2.6.
4346 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4348 * configure.in: Sort list of architectures. Accept but do nothing
4349 for alliant, convex, pyramid, romp, and tahoe.
4351 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4353 * a29k-dis.c (print_special): Change num to unsigned int.
4355 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4357 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4360 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4362 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4363 * configure: Rebuilt.
4365 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4367 * configure.in: Add case for bfd_i860_arch.
4368 * configure: Rebuild.
4370 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4372 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4373 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4374 (NEXTDOUBLE): Likewise.
4375 (print_insn_m68k): Don't match fmoveml if there is more than one
4376 register in the list.
4377 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4379 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4381 * m68k-opc.c: Use #W rather than #w.
4382 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4384 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4386 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4387 and likewise for all the dbxx opcodes.
4389 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4391 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4393 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4395 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4396 the VR4100 specific instructions to the mips_opcodes structure.
4398 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4400 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4401 ugly Metrowerks bug in CW6, is fixed in CW7.
4403 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4405 * ppc-opc.c (whole file): Add flags for common/any support.
4407 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4409 * Makefile.in (BISON): Remove macro.
4410 (FLAGS_TO_PASS): Remove BISON.
4412 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4414 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4416 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4417 instructions that take no args by looking at the match mask.
4418 (print_insn_arg): Always print "%" before register names.
4419 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4420 [case '_']: Don't print "@#" before address.
4421 [case 'J']: Use "%s" as format string, not register name.
4422 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4424 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4426 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4429 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4431 From David Mosberger-Tang <davidm@azstarnet.com>
4433 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4434 (alpha_insn_set): added definitions for VAX floating point
4435 instructions (Unix compilers don't generate these, but handcoded
4436 assembly might still use them).
4438 * alpha-dis.c (print_insn_alpha): added support for disassembling
4439 the miscellaneous instructions in the Alpha instruction set.
4441 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4443 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4444 no longer create sysdep.h, sed ppc-opc.c to work around a
4445 serious Metrowerks C bug.
4446 * mpw-make.in: Remove.
4447 * mpw-make.sed: New file, used by mpw-configure to edit
4448 Makefile.in into an MPW makefile.
4450 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4452 * Makefile.in (maintainer-clean): New synonym for realclean.
4454 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4456 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4457 which use '0', '1', and '2' instead. Specify the proper size for
4458 a pmove immediate operand. Correct the pmovefd patterns to be
4459 moves to a register, not from a register.
4460 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4462 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4464 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4465 %psr, %wim, %tbr as F_NOTV9.
4467 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4469 * Makefile.in (Makefile): Just rebuild Makefile when running
4471 (config.h, stamp-h): New targets.
4472 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4473 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4474 rebuilding config.h.
4475 * configure: Rebuild.
4477 * mips-opc.c: Change unaligned loads and stores with "t,A"
4478 operands to use "t,A(b)".
4480 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4482 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4484 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4486 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4487 until 3 instead of until 2.
4489 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4491 * Makefile.in (ALL_CFLAGS): Define.
4492 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4493 (MOSTLYCLEAN): Add config.log.
4494 (distclean): Don't remove config.log.
4495 * configure.in: Substitute HDEFINES.
4496 * configure: Rebuild.
4498 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4500 * sh-opc.h (sh_arg_type): Add F_FR0.
4501 (sh_table, case fmac): Add F_FR0 as first argument.
4503 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4505 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4507 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4509 * sparc-dis.c: Remove all references to NO_V9.
4511 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4513 * aclocal.m4: Just include ../bfd/aclocal.m4.
4514 * configure: Rebuild.
4516 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4518 * sparc-dis.c (X_DISP19): Define.
4519 (print_insn, case 'G'): Use it.
4520 (print_insn, case 'L'): Sign extend displacement.
4522 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4524 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4525 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4526 host_makefile_frag or frags.
4527 * aclocal.m4: New file.
4528 * configure: Rebuild.
4529 * Makefile.in (INSTALL): Set to @INSTALL@.
4530 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4531 (INSTALL_DATA): Set to @INSTALL_DATA@.
4533 (AR_FLAGS): Set to rc rather than qc.
4534 (CC): Define as @CC@.
4535 (CFLAGS): Set to @CFLAGS@.
4536 (@host_makefile_frag@): Remove.
4537 (config.status): Remove dependency upon @frags@.
4539 * configure.in: ../bfd/config.bfd now just sets shell variables.
4540 Use them rather than looking through target Makefile fragments.
4541 * configure: Rebuild.
4543 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4545 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4547 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4549 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4550 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4553 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4554 (lookup_{name,value}): New functions.
4555 (prefetch_table): New static local.
4556 (sparc_{encode,decode}_prefetch): New functions.
4557 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4559 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4561 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4564 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4566 * sh-dis.c: Correct comment on first line of file.
4568 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4570 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4572 * sparc-opc.c (asi, membar): New static locals.
4573 (sparc_{encode,decode}_{asi,membar}): New functions.
4574 (sparc_opcodes, membar insn): Fix.
4575 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4576 Support decoding of membar masks.
4579 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4581 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4583 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4585 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4586 and likewise for the other branches. Add bhs as an alias for bcc,
4587 and likewise for the size variants. Add dbhs as an alias for
4590 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4592 * sh-opc.h (FP sts instructions): Update to match reality.
4594 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4596 * m68k-dis.c: (fpcr_names): Add % before all register names.
4597 (reg_names): Likewise.
4598 (print_insn_arg): Don't explicitly print % before register names.
4599 Add % before register names in static array names. In case 'r',
4600 print data registers as `@(Dn)', not `Dn@'. When printing a
4601 memory address, don't print @# before it.
4602 (print_indexed): Change base_disp and outer_disp from int to
4603 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4604 syntax. Sign extend 8 byte displacement correctly.
4605 (print_base): Print using MIT syntax. Print zpc when appropriate.
4606 Change parameter disp from int to bfd_vma.
4608 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4611 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4613 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4614 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4615 * sh-opc.h (sh_arg_type): Add new operand types.
4616 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4618 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4620 * Makefile.in (distclean): Remove generated file config.h.
4622 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4624 * Makefile.in (distclean): Remove generated file config.h.
4626 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4628 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4630 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4632 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4633 rather than numopcodes. Use m68k_opcodes rather than removed
4634 opcode function. Don't check F_ALIAS.
4635 (print_insn_arg): Change first parameter to be const char *.
4636 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4637 (m68k-opc.o): New target.
4638 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4639 * configure: Rebuild.
4641 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4643 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4644 (opcode_bits, opcode_hash_table): New variables.
4645 (opcodes_initialized): Renamed from opcodes_sorted.
4646 (build_hash_table): New function.
4647 (is_delayed_branch): Use hash table.
4648 (print_insn): Renamed from print_insn_sparc, made static.
4649 Build and use hash table. If !sparc64, ignore sparc64 insns,
4650 and vice-versa if sparc64.
4651 (print_insn_sparc, print_insn_sparc64): New functions.
4652 (compare_opcodes): Move sparc64 opcodes to end.
4653 Print commutative insns with constant second.
4654 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4656 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4658 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4659 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4660 avoids printing a delay slot in a delay slot.
4661 * sh-opc.h (sh_table): Fully bracket last entry.
4663 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4665 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4667 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4669 * configure.in: Get host_makefile_frag from ${srcdir}.
4671 * configure.in: Autoconfiscated. Check for string[s].h. Create
4672 config.h from config.in. Don't set up sysdep.h link.
4673 * sysdep.h: New file.
4674 * configure, config.in: New files, generated from configure.in.
4675 * Makefile.in: Updated to be processed autoconf-style.
4676 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4677 (Makefile): Depend on config.status.
4678 (config.status): New rule.
4679 * configure.bat: Update Makefile substitutions.
4681 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4683 * mips-opc.c (L1): Define.
4684 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4685 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4688 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4690 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4691 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4692 have multiple add units but only a single logical unit.
4694 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4695 shifted by 18, without any insertion or extraction function.
4696 (insert_cr, extract_cr): Remove.
4698 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4700 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4703 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4705 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4706 * sh-opc.h: Add copyright.
4708 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4710 * Makefile.in (crunch-m68k): Delete extra target accidentally
4711 checked in a while ago.
4713 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4715 * sh-opc.h (sh_table): Add SH3 support.
4717 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4719 * sh-opc.h: Added bsrf and braf.
4721 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4723 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4724 bogus [ls]fm{ea,fd} patterns.
4726 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4727 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4728 initialize it from memory. Make function static.
4729 (print_insn_{big,little}_arm): New functions.
4730 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4731 the correct endianness.
4733 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4735 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4738 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4740 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4741 17th, so that it builds again using GCC as the compiler.
4743 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4745 * mips-dis.c (print_insn_little_mips): Cast return value from
4746 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4747 expects an unsigned long, and that might be fewer words of
4748 argument storage (e.g., if bfd_vma is long long on a 32-bit
4750 (print_insn_big_mips): Likewise with bfd_getb32 value.
4751 (_print_insn_mips): Now static.
4753 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4755 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4756 gcc memory hog problem with initializer is fixed.
4758 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4760 Merge in support for Mac MPW as a host.
4761 (Old change descriptions retained for informational value.)
4763 * mpw-config.in (archname): Compute from the config.
4764 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4766 * mpw-config.in (target_arch): Compute from canonical target.
4767 (m68k, mips, powerpc, sparc): Add architectures.
4768 * mpw-make.in (disassemble.c.o): Add.
4769 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4771 * mpw-config.in (BFD_MACHINES): Set to a default value.
4772 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4774 * mpw-make.in (CSEARCH): Add extra-include to search path.
4776 * mpw-config.in (varargs.h): Don't create.
4777 (sysdep.h): Create using forward-include.
4778 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4780 * mpw-config.in: New file, MPW version of configure.in.
4781 * mpw-make.in: New file, MPW version of Makefile.in.
4783 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4785 * alpha-dis.c (print_insn_alpha): Put empty statement after
4788 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4790 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4791 (low_sign_extend): Likewise.
4792 (get_field): Delete unused function.
4793 (set_field, deposit_14, deposit_21): Likewise.
4795 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4797 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4800 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4802 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4804 * alpha-opc.h (OSF_ASMCODE): define
4805 print pal-code names as defined in App C of the
4806 Alpha Architecture Reference Manual
4808 * alpha-dis.c: cleaned up output
4809 print stylized code forms as defined in App A.4.3 of the
4810 Alpha Architecture Reference Manual
4812 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4814 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4816 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4819 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4821 * m68k-dis.c (opcode): New function. Returns address of opcode
4822 table entry given index, even if the opcode table was split to
4823 work around gcc bugs.
4824 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4826 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4827 (reg_names): Now const.
4828 (print_insn_arg): Arrays cacheFieldName and names now const.
4829 (print_indexed): Array scales now const.
4831 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4833 * ppc-opc.c: Sort recently added instructions by minor opcode
4834 number within major opcode number.
4836 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4838 * hppa-dis.c: Include libhppa.h.
4840 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4842 * mips-opc.c: Change dli to use M_DLI, and add dla.
4844 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4846 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4848 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4850 * mips-opc.c: Add r4650 mul instruction.
4852 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4854 * mips-opc.c: Add uld and usd macros for unaligned double load and
4857 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4859 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4860 mfdcr, mtdcr, icbt, iccci.
4862 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4864 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4865 signed char fields to shorts, more portable.
4867 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4869 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4870 char fields as signed chars, since they may have negative values.
4872 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4874 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4875 (mycroft@netbsd.org).
4877 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4879 From "Logg, Ed" <elogg@ea.com>:
4880 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4881 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4884 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4886 * ppc-opc.c: Changes based on patch from David Edelsohn
4887 <edelsohn@mhpcc.edu>.
4888 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4891 (insert_tbr): New static function.
4892 (extract_tbr): New static function.
4893 (XFXFXM_MASK, XFXM): Define.
4894 (XSPRBAT_MASK, XSPRG_MASK): Define.
4895 (powerpc_opcodes): Add instructions to access special registers by
4896 name. Add mtcr and mftbu.
4898 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4900 * mips-opc.c (P3): Define.
4901 (mips_opcodes): Add mad and madu.
4903 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4905 * configure.in: Add W65 support.
4906 * disassemble.c: Likewise.
4907 * w65-opc.h, w65-dis.c: New files.
4909 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4911 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4914 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4916 * mips-opc.c: Add dli as a synonym for li.
4918 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4920 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4921 print something for reserved opcode values, even if it won't
4924 * mips-dis.c (_print_insn_mips): When initializing, shift right
4925 and mask, to avoid sign extension problems on the Alpha.
4927 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4930 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4932 * sh-opc.h (mov.l gbr): Get direction right.
4933 * sh-dis.c (print_insn_shx): New function.
4934 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4935 print opcodes with right byte order.
4937 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4939 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4940 to avoid conflicts with getopt.
4942 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4944 * hppa-dis.c (print_insn_hppa): Read the instruction using
4945 bfd_getb32, so that it works on a little endian or 64 bit host.
4946 Remove unused local variable op.
4948 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4950 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4951 addu does not work correctly if -mips3.
4953 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4955 * a29k-dis.c (print_special): Add special register names defined
4956 on 29030, 29040 and 29050.
4957 (print_insn): Handle new operand type 'I'.
4959 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4961 * Makefile.in (INSTALL): Use top level install.sh script.
4963 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4965 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4966 that it works on a little endian host.
4968 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4970 * configure.in: Use ${config_shell} when running config.bfd.
4972 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4974 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4976 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4978 * a29k-dis.c (print_insn): Print the opcode.
4980 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4982 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4984 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4986 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4988 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4990 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4991 which store a value into memory.
4993 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4995 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4996 * arm-dis.c, arm-opc.h: New files.
4998 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
5000 * Makefile.in (ns32k-dis.o): Add dependency.
5001 * ns32k-dis.c (print_insn_arg): Declare initialized local as
5002 string, not as array of chars.
5004 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5006 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
5008 * sparc-opc.c: Added sparclite extended FP operations, and
5009 versions of v9 impdep* instructions permitting specification of
5012 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5014 * i960-dis.c (reg_names): Now const.
5015 (struct sparse_tabent): New type, copied from array type in mem
5017 (ctrl): Local static array ctrl_tab now const.
5018 (cobr): Local static array cobr_tab now const.
5019 (mem): Local variables reg1, reg2, reg3 now point to const. Local
5020 static variable mem_tab no longer explicitly initialized. Changed
5021 mem_init to const array of struct sparse_tabent.
5022 (reg): Local static variable reg_tab no longer explicitly
5023 initialized. Changed reg_init to const array of struct
5025 (ea): Local static array scale_tab now const.
5027 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
5030 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
5032 * configure.bat: the disassember needs to be enabled for
5033 "objdump -d" to work in djgpp.
5035 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5037 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
5038 (invalid_float): Enabled general version, doesn't require running
5039 on ns32k host. Changed to take char* argument, and test for
5040 explicitly specified sizes, instead of using sizeof() on host CPU
5042 (INVALID_FLOAT): Cast first argument.
5043 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
5044 list_P032, list_M032): Now const.
5045 (optlist, list_search): Made appropriate arguments now point to
5047 (print_insn_arg): Changed static array of one-character-string
5048 pointers into a static const array of characters; fixed sprintf
5049 statement accordingly.
5051 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
5053 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
5054 from distribution. A ns32k-dis.c from a previous distribution has
5055 been brought up to date and supports the new interface.
5057 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
5059 * configure.in: add bfd_ns32k_arch target support.
5061 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
5062 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
5064 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
5066 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
5069 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
5071 * h8300-dis.c, mips-dis.c: Don't use true and false.
5073 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
5075 * configure.in: Change --with-targets to --enable-targets.
5077 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
5079 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
5080 opcodes to the first instruction with that opcode, to speed
5081 disassembly of large files. From ralphc@pyramid.com (Ralph
5084 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5086 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
5088 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
5090 * configure.bat: update to latest makefile.in
5092 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
5094 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
5095 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5096 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5097 slot insn is in a delay slot.
5098 * z8k-opc.h: (resflg): Fix patterns.
5099 * h8500-opc.h Fix CR insn patterns.
5101 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5103 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5104 "cmpl" before POWER versions, so that gas -many uses them.
5106 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5108 * disassemble.c: New file.
5109 * Makefile.in (OFILES): Add disassemble.o.
5110 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5111 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5112 binutils/configure.in.
5114 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5115 opcode being examined.
5117 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5119 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5120 (insert_ral, insert_ram, insert_ras): New functions.
5121 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5122 RAS for store with update.
5124 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5126 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5127 (edelsohn@npac.syr.edu).
5129 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5131 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5134 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5136 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5138 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5140 * ppc-opc.c (powerpc_operands): The signedp field has been
5141 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5142 instead. Add new operand SISIGNOPT.
5143 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5144 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5145 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5148 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5150 * i386-dis.c (struct private): Renamed to dis_private. `private'
5151 is a reserved word for dynix cc.
5153 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5155 * configure.in: Change error message to refer to bfd/config.bfd
5156 rather than bfd/configure.in.
5158 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5160 * ppc-opc.c: Define POWER2 as short alias flag.
5161 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5164 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5166 * i960-dis.c (print_insn_i960): Don't read a second word for
5167 opcodes 0, 1, 2 and 3.
5169 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5171 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5173 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5175 * m68881-ext.c: Removed; no longer used.
5176 * Makefile.in: Changed accordingly.
5178 * m68k-dis.c (ext_format_68881): Don't declare.
5179 (print_insn_m68k): If an instruction uses place 'i', it uses at
5180 least four fixed bytes.
5181 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5182 extended float, convert to double using floatformat_to_double, not
5183 ieee_extended_to_double, and fetch the data before converting it.
5185 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5187 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5188 davidj@ICSI.Berkeley.EDU (David Johnson).
5190 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5192 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5193 PowerPC uses bdnz[l][a].
5195 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5197 * dis-buf.c, i386-dis.c: Include sysdep.h.
5199 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5201 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5203 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5204 by Motorola PowerPC 601 with PPC_OPCODE_601.
5205 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5206 Disassemble Motorola PowerPC 601 instructions as well as normal
5207 PowerPC instructions.
5209 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5211 * i960-dis.c (reg, mem): Just use a static array instead of
5214 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5216 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5217 condition name index if this is for a negated condition.
5219 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5220 Floating point format for 'H' operand is backwards from normal
5221 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5222 operands (fmpyadd and fmpysub), handle bizarre register
5223 translation correctly for single precision format.
5225 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5226 or 'I' operands if the next format specifier is 'M' (fcmp
5227 condition completer).
5229 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5231 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5232 single number giving a bitmask for the MB and ME fields of an M
5233 form instruction. Change NB to accept 32, and turn it into 0;
5234 also turn 0 into 32 when disassembling. Seperated SH from NB.
5235 (insert_mbe, extract_mbe): New functions.
5236 (insert_nb, extract_nb): New functions.
5237 (SC_MASK): Mask out SA and LK bits.
5238 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5239 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5240 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5241 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5242 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5243 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5244 (powerpc_macros): Define table of macro definitions.
5245 (powerpc_num_macros): Define.
5247 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5248 if PPC_OPERAND_NEXT is set.
5250 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5252 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5253 char. Retrieve contents using bfd_getl32 instead of shifting.
5255 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5257 * ppc-opc.c: New file. Opcode table for PowerPC, including
5258 opcodes for POWER (RS/6000).
5259 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5260 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5261 (CFILES): Add ppc-dis.c.
5262 (ppc-dis.o, ppc-opc.o): New targets.
5263 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5265 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5267 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5268 No space before 'u', 'f', or 'N'.
5270 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5272 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5273 farther than we should.
5275 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5277 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5279 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5281 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5283 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5284 needs it, to prevent reading past the end of a section.
5286 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5288 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5289 Removed t,A case for la; always use t,A(b) case.
5291 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5293 From Ted Lemen <mellon@pepper.ncd.com>
5294 * mips-dis.c (print_insn_arg): Handle 'k'.
5295 * mips-opc.c: Make cache use k, not t.
5297 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5299 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5300 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5301 FLOAT_FORMAT_CODE to put out floating point register names.
5303 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5305 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5307 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5309 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5311 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5313 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5314 larger than 32. Moved dsxx32 variants first for disassembler.
5316 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5318 * z8kgen.c, z8k-opc.h: Add full lda information.
5320 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5322 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5323 movb instructions. Any necessary space will be emitted by
5324 the code to handle nullification completers.
5326 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5328 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5330 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5332 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5333 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5335 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5337 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5339 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5341 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5342 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5344 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5346 * m88k-dis.c (m88kdis): comment change. Remove space after
5348 (printop): handle new arg types DEC and XREG for m88110.
5350 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5352 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5353 type for absolute branch addresses. Delete special
5354 "ble" and "be" code in 'W' operand code.
5356 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5358 * mips-opc.c: Set hazard information correctly for branch
5359 likely instructions.
5361 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5363 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5364 info->fprintf_func for printing and info->print_address_func for
5367 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5369 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5371 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5373 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5374 Corrected second case of "b" for disassembler.
5376 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5378 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5379 to BFD swapping routines to correspond to BFD name changes.
5381 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5383 * mips-opc.c: Change div machine instruction to be z,s,t rather
5384 than s,t. Change div macro to be d,v,t rather than d,s,t.
5385 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5386 rem and remu which generates only the corresponding div
5387 instruction. This is for compatibility with the MIPS assembler,
5388 which only generates the simple machine instruction when an
5389 explicit destination of $0 is used.
5390 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5392 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5394 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5395 WR_31 hazard for bal, bgezal, bltzal.
5397 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5399 * hppa-dis.c (print_insn_hppa): Use print function
5400 from within the disassemble_info, not fprintf_filtered.
5402 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5404 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5405 Law, law@cs.utah.edu.)
5407 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5409 * mips-opc.c ("absu"): Removed.
5412 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5414 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5415 Changed hazard information to distinguish between memory load
5416 delays and coprocessor load delays.
5418 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5420 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5422 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5424 * configure.in: Don't pass cpu to config.bfd.
5426 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5428 * m88k-dis.c (m88kdis): Make class unsigned.
5430 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5432 * alpha-dis.c (print_insn_alpha): One branch format case was
5433 missing the instruction name.
5435 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5437 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5438 Add the arch-specific auxiliary files.
5439 (OFILES): Remove the arch-specific auxiliary files
5440 and use BFD_MACHINES instead of DIS_LIBS.
5441 * configure.in: Set BFD_MACHINES based on --with-targets option.
5443 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5445 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5448 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5450 * sparc-opc.c: Change CONST to const to deal with gcc
5451 -Dconst=__const -traditional.
5453 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5455 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5456 coprocessor instructions out of #if 0, and made them use new
5459 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5461 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5463 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5465 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5466 instruction, for use by the disassembler.
5468 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5469 hand-coded sign extensions that depended on 32-bit host ints.
5470 FIXME, we still depend on big-endian host bitfield ordering.
5471 (sparc_print_insn): Set the insn_info_valid field, and the
5472 other fields that describe the instruction being printed.
5474 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5476 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5477 `jmp' instead of just one of them.
5479 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5481 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5482 (fput_fp_reg_r): Renamed from fput_reg_r.
5483 (fput_fp_reg): New function.
5484 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5486 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5488 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5490 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5492 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5494 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5495 don't output a space.
5497 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5499 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5501 * mips-opc.c: New file, containing opcode table from
5502 ../include/opcode/mips.h.
5503 * Makefile.in: Add it.
5505 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5507 * m88k-dis.c: New file, moved in from gdb and changed to use the
5508 new dis-asm.h disassembler interface.
5509 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5510 (m88k-dis.o): New target.
5512 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5514 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5515 argument string const char * to correspond to opcode/mips.h.
5517 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5519 * mips-dis.c: Updated to account for name changes in new version
5521 * Makefile.in: Added header file dependencies.
5523 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5525 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5527 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5529 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5530 extend, rather than shifts.
5532 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5534 * Makefile.in: Undo 15 June change.
5536 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5538 * m68k-dis.c (print_insn_arg): Change return value to byte count
5540 * m68k-dis.c: Re-write to detect invalid operands before
5541 printing anything, so we can handle this the same way we
5542 handle invalid opcodes.
5544 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5546 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5548 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5550 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5553 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5555 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5557 * configure.in: Do make sysdep.h link.
5558 * Makefile.in: Search ../include. Don't search ../bfd.
5560 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5562 Changes from Jeff Law, law@cs.utah.edu:
5563 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5564 Do not print a space before the completers specified by
5567 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5569 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5570 defined, since gdb has been fixed.
5572 Changes from Jeff Law, law@cs.utah.edu:
5573 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5574 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5575 be a *disassemble_info, not a *FILE.
5576 * hppa-dis.c: Support 'd', '!', and 'a'.
5577 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5578 * hppa-dis.c: Delete cases which are no longer needed.
5580 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5582 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5584 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5586 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5589 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5591 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5592 * configure.in: No longer need to configure to get sysdep.h.
5594 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5596 * Patches from Jeffrey Law <law@cs.utah.edu>.
5597 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5598 templates for 1.1 FP computational instructions.
5600 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5602 * h8500-dis.c (print_insn_h8500): Address argument is type
5604 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5607 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5608 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5610 * sparc-dis.c (compare_opcodes): Move static declaration to
5613 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5615 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5616 instruction, remove unimp hack from 'l' argument.
5618 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5620 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5623 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5625 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5626 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5629 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5631 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5632 arrays of string pointers to 2-d arrays of chars, to save
5635 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5637 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5638 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5640 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5642 * hppa-dis.c: New file from Utah, adapted to new disassembler
5644 * Makefile.in: Include it.
5646 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5648 * sh-dis.c, sh-opc.h: New files.
5650 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5652 * alpha-dis.c, alpha-opc.h: New files.
5654 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5656 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5659 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5661 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5663 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5665 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5668 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5670 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5671 and double percent signs a few places.
5673 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5675 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5676 Use info->print_address_func not print_address.
5678 * dis-buf.c (generic_print_address): New function.
5680 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5682 * Makefile.in: Add sparc-dis.c.
5683 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5685 Add `add' instruction to the set that get checked
5686 for a preceding `sethi' in order to print an absolute address.
5687 * (print_insn): Disassembly prefers real instructions.
5688 (is_delayed_branch): Speed up.
5689 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5690 Still missing some float ops, and needs testing.
5691 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5692 F_ALIAS. Use printf, not fprintf, when not passing a file
5694 (compare_opcodes): Check that identical instructions have
5695 identical opcodes, complain otherwise.
5698 * Include reg_names.
5700 Use dis-asm.h/read_memory_func interface.
5702 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5704 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5705 deliberately return non-zero to setjmp from longjmp. Otherwise
5706 this code fails to compile.
5708 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5710 * m68k-dis.c: Fix prototype for fetch_arg().
5712 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5714 * dis-buf.c: New file, for new read_memory_func interface.
5715 Makefile.in (OFILES): Include it.
5716 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5717 Use new read_memory_func interface.
5719 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5721 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5722 * h8500-opc.h: Fix couple of opcodes.
5724 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5726 * Makefile.in: add dvi & installcheck targets
5728 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5730 * Makefile.in: Update for h8500-dis.c.
5732 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5734 * h8500-dis.c, h8500-opc.h: New files
5736 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5738 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5739 ../include/dis-asm.h.
5740 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5741 and ../gdb/m68k-pinsn.c).
5742 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5743 and ../gdb/i386-pinsn.c).
5744 * m68881-ext.c: New file. Moved definition of
5745 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5746 * Makefile.in: Adjust for new files.
5747 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5748 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5749 can be dis-assembled.
5751 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5753 * mips-dis.c (print_insn_arg): Now returns void.
5755 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5757 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5758 files that use the macros.
5760 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5762 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5763 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5764 (CFILES): Added mips-dis.c.
5766 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5768 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5769 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5771 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5773 * Makefile.in: Improve *clean rules.
5774 * configure.in: Allow a default host.
5776 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5778 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5779 files include other sysdep files
5781 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5783 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5785 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5787 * configure.in: For host support, use ../bfd/configure.host
5788 so it stays in sync with the ../bfd/hosts database.
5790 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5792 * configure.in: use cpu-vendor-os triple instead of nested cases
5794 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5796 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5797 *always* the wrong one.
5799 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5801 * z8kgen.c: added copyright info
5803 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5805 * z8k-dis.c (unparse_instr): prettier tabs
5806 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5808 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5810 * configure.in: Add ncr* configuration.
5811 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5812 picayune ANSI compilers happy.
5814 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5816 * configure.in (i386): Make i386 and i486 synonymous for now.
5817 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5819 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5821 * Makefile.in (install): Fix typo.
5823 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5825 * Makefile.in (make): Remove obsolete crud.
5826 (sparc-opc.o): Avoid Sun Make VPATH bug.
5828 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5830 * Makefile.in: since there are no SUBDIRS, remove rule and
5831 references of subdir_do.
5833 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5835 * Makefile.in (install): Get the library name right here too.
5836 Don't install bfd.h, since it's unrelated to this library. No
5837 subdirs to recurse into, either.
5838 (CFILES): The source file has a .c suffix, not .o.
5840 * sparc-opc.c: New file, moved from BFD.
5841 * Makefile.in (OFILES): Build it.
5843 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5845 * z8k-dis.c: fixed forward refferences of some declarations.
5847 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5849 * Makefile.in: get the name of the library right
5851 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5853 * z8k-dis.c: knows how to disassemble z8k stuff
5854 * z8k-opc.h: new file full of z8000 opcodes
5858 version-control: never