1 2002-03-05 Paul Koning <pkoning@equallogic.com>
3 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
4 for float opcodes that take float operands. Add alternate
5 names (xxxD vs. xxxF) for float opcodes.
6 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
7 (print_foperand): New function to handle float opcode operands.
8 (print_insn_pdp11): Use print_foperand to disassemble float ops.
10 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
14 2002-02-26 Brian Gaeke <brg@dgate.org>
16 * Makefile.am (install-data-local): Install dis-asm.h.
18 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
20 * configure.in (LINGUAS): Add de.po.
21 * configure: Regenerate.
24 2002-02-25 Alan Modra <amodra@bigpond.net.au>
26 * ppc-dis.c (powerpc_dialect): Handle power4 option.
27 * ppc-opc.c (insert_bdm): Correct description of "at" branch
28 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
29 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
30 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
31 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
32 (PPCCOM32, PPCCOM64): Delete.
33 (NOPOWER4, POWER4): Define.
34 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
35 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
36 are enabled for power4 rather than ppc64.
38 2002-02-20 Tom Rix <trix@redhat.com>
40 * ppc-opc.c (powerpc_operands): Add WS feild. Use for tlbre, tlbwe.
42 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
44 * s390-dis.c (init_disasm): Use renamed architecture defines.
46 2002-02-19 matthew green <mrg@redhat.com>
48 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
51 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
53 * po/tr.po: Updated translation.
55 2002-02-15 Richard Henderson <rth@redhat.com>
57 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
60 2002-02-15 Richard Henderson <rth@redhat.com>
62 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
65 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
67 * po/da.po: Updated translation.
69 2002-02-12 Graydon Hoare <graydon@redhat.com>
71 * cgen-asm.in (parse_insn_normal): Change call from
72 @arch@_cgen_parse_operand to cd->parse_operand, to
73 facilitate CGEN_ASM_INIT_HOOK doing useful work.
75 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
77 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
80 2002-02-11 Alan Modra <amodra@bigpond.net.au>
82 * Makefile.am: "make dep-am".
83 * Makefile.in: Regenerate.
84 * aclocal.m4: Regenerate.
85 * config.in: Regenerate.
86 * configure: Regenerate.
88 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
90 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
91 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
93 * configure: Regenerate.
95 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
97 * cgen-dis.c: Add prototypes for count_decodable_bits
98 and add_insn_to_hash_chain.
100 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
102 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
103 * configure: Rebuilt.
105 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
107 * or32-opc.c: Fix compile time warning messages.
108 * or32-dis.c: Fix compile time warning messages.
110 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
113 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
114 * sh64-opc.c: Regenerate.
115 2001-03-13 DJ Delorie <dj@redhat.com>
116 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
117 purpose is more obvious.
118 * sh64-opc.c (shmedia_table): Ditto.
119 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
120 (print_insn_shmedia): Ditto.
121 2001-03-12 DJ Delorie <dj@redhat.com>
122 * sh64-opc.c: Adjust comments to reflect reality: replace bits
123 3:0 with zeros (not "reserved"), replace "rrrrrr" with
124 "gggggg" for two-operand floating point opcodes. Remove
126 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
127 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
128 Correct printing of .byte:s. Return number of printed bytes or
130 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
131 to next four-byte-alignment if insn or data is not aligned.
132 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
133 * sh64-dis.c: Update comments and fix comment formatting.
134 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
135 Abort instead of setting length to 0.
136 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
137 crange_bsearch_cmpl, sh64_get_contents_type,
138 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
139 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
140 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
141 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
142 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
143 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
144 address with same prefix as SHcompact.
145 In the disassembler, use a .cranges section for linked executables.
146 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
147 and update for using structure in info->private_data.
148 (struct sh64_disassemble_info): New.
149 (is_shmedia_p): Delete.
150 (crange_qsort_cmpb): New function.
151 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
152 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
153 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
154 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
155 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
156 pair. Display addresses for linked executables only.
157 (print_insn_sh64x_media): Initialize info->private_data by calling
158 init_sh64_disasm_info.
159 (print_insn_sh64x): Ditto. Find out type of contents by calling
160 sh64_contents_type_disasm. Display data regions using ".long" and
161 ".byte" similar to unrecognized opcodes.
162 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
163 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
164 information in section flags before considering symbols. Don't
165 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
166 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
167 matching $target $canon_targets instead of looking at the
168 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
169 * configure: Regenerate.
170 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
171 * sh64-opc.c (shmedia_creg_table): New.
172 * sh64-opc.h (shmedia_creg_info): New type.
173 (shmedia_creg_table): Declare.
174 * sh64-dis.c (creg_name): New function.
175 (print_insn_shmedia): Use it.
176 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
177 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
178 print_insn_sh64l if little-endian.
179 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
180 (print_insn_sh64l): New.
181 (print_insn_sh64x): New.
182 (print_insn_sh64x_media): New.
183 (print_insn_sh64): Break out code to print_insn_sh64x and
184 print_insn_sh64x_media.
185 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
186 * sh64-opc.h: New file
187 * sh64-opc.c: New file
188 * sh64-dis.c: New file
189 * Makefile.am: Add sh64 targets.
190 (HFILES): Add sh64-opc.h.
191 (CFILES): Add sh64-opc.c and sh64-dis.c.
192 (ALL_MACHINES): Add sh64 files.
193 * Makefile.in: Regenerate.
194 * configure.in: Add support for sh64 to bfd_sh_arch.
195 * configure: Regenerate.
196 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
197 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
199 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
200 * po/POTFILES.in: Regenerate.
201 * po/opcodes.pot: Regenerate.
203 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
205 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
207 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
209 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
211 2002-02-01 Alan Modra <amodra@bigpond.net.au>
213 * Makefile.am: Run "make dep-am"
214 * Makefile.in: Regenerate.
216 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
218 * or32-dis.c: New file.
219 * or32-opc.c: New file.
220 * configure.in: Add support for or32.
221 * configure: Regenerate.
222 * Makefile.am: Add support for or32.
223 * Makefile.in: Regenerate.
224 * disassemble.c: Add support for or32.
225 * po/POTFILES.in: Regenerate.
226 * po/opcodes.pot: Regenerate.
228 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
230 * configure: Regenerated.
232 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
234 * po/fr.po: Updated version.
236 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
238 * po/es.po: Updated version.
240 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
242 * po/da.po: New version.
244 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
246 * po/da.po: New file: Spanish translation.
247 * configure.in (ALL_LINGUAS): Add da.
248 * configure: Regenerate.
250 2002-01-22 Graydon Hoare <graydon@redhat.com>
252 * fr30-asm.c: Regenerate.
253 * fr30-desc.c: Likewise.
254 * fr30-desc.h: Likewise.
255 * fr30-dis.c: Likewise.
256 * fr30-ibld.c: Likewise.
257 * fr30-opc.c: Likewise.
258 * fr30-opc.h: Likewise.
259 * m32r-asm.c: Likewise.
260 * m32r-desc.c: Likewise.
261 * m32r-desc.h: Likewise.
262 * m32r-dis.c: Likewise.
263 * m32r-ibld.c: Likewise.
264 * m32r-opc.c: Likewise.
265 * m32r-opc.h: Likewise.
266 * m32r-opinst.c: Likewise.
267 * openrisc-asm.c: Likewise.
268 * openrisc-desc.c: Likewise.
269 * openrisc-desc.h: Likewise.
270 * openrisc-dis.c: Likewise.
271 * openrisc-ibld.c: Likewise.
272 * openrisc-opc.c: Likewise.
273 * openrisc-opc.h: Likewise.
274 * xstormy16-desc.c: Likewise.
276 2002-01-22 Richard Henderson <rth@redhat.com>
278 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
281 2002-01-22 Alan Modra <amodra@bigpond.net.au>
283 * Makefile.am: Run "make dep-am".
284 * Makefile.in: Regenerate.
285 * opcodes/po/POTFILES.in: Regenerate.
287 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
289 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
290 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
292 2002-01-18 Keith Walker <keith.walker@arm.com>
294 * arm-opc.h (arm_opcodes): Add bxj instruction.
296 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
298 * po/opcodes.pot: Regenerate.
299 * po/fr.po: Regenerate.
300 * po/sv.po: Regenerate.
301 * po/tr.po: Regenerate.
303 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
305 * po/tr.po: Import new version.
307 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
309 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
310 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
313 2002-01-10 matthew green <mrg@redhat.com>
315 * xstormy16-asm.c: Regenerate.
316 * xstormy16-desc.c: Likewise.
317 * xstormy16-desc.h: Likewise.
318 * xstormy16-dis.c: Likewise.
319 * xstormy16-opc.c: Likewise.
320 * xstormy16-opc.h: Likewise.
322 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
324 * po/es.po: New file: Spanish translation.
325 * configure.in (ALL_LINGUAS): Add es.
326 * configure: Regenerate.
328 2001-12-31 Jeffrey A Law (law@redhat.com)
330 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
331 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
332 Always emit a space after 'H'.
334 2001-12-18 matthew green <mrg@redhat.com>
336 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
338 2001-12-17 Richard Henderson <rth@redhat.com>
340 * alpha-opc.c (unop): Encode with RB as $sp.
342 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
344 * Makefile.am: Add support for xstormy16.
345 * Makefile.in: Regenerate.
346 * configure.in: Add support for xstormy16.
347 * configure: Regenerate.
348 * disassemble.c: Add support for xstormy16.
349 * xstormy16-asm.c: New generated file.
350 * xstormy16-desc.c: New generated file.
351 * xstormy16-desc.h: New generated file.
352 * xstormy16-dis.c: New generated file.
353 * xstormy16-ibld.c: New generated file.
354 * xstormy16-opc.c: New generated file.
355 * xstormy16-opc.h: New generated file.
357 2001-12-06 Richard Henderson <rth@redhat.com>
359 * alpha-opc.c (alpha_opcodes): Add wh64en.
361 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
363 * d10v-opc.c (d10v_predefined_registers): Remove warnings
364 introduced in Nov 29's patch.
366 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
369 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
372 * d10v-opc.c (RSRC_NOSP): New macro.
373 (d10v_operands): Add it.
374 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
376 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
378 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
379 (RSRC_SP): New macro.
380 (d10v_operands): Add it.
381 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
383 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
385 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
386 Also, break out of the loop as soon as an instruction has been
389 2001-11-17 matthew green <mrg@redhat.com>
391 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
393 2001-11-15 Alan Modra <amodra@bigpond.net.au>
395 * po/POTFILES.in: Regenerate.
397 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
398 (insert_bat, extract_bat, insert_bba, extract_bba,
399 insert_bd, extract_bd, insert_bdm, extract_bdm,
400 insert_bdp, extract_bdp, valid_bo,
401 insert_bo, extract_bo, insert_boe, extract_boe,
402 insert_ds, extract_ds, insert_de, extract_de,
403 insert_des, extract_des, insert_li, extract_li,
404 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
405 insert_nb, extract_nb, insert_nsi, extract_nsi,
406 insert_ral, insert_ram, insert_ras,
407 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
408 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
409 (extract_bd, extract_bdm, extract_bdp,
410 extract_ds, extract_des,
411 extract_li, extract_nsi): Implement sign extension without conditional.
412 (insert_bdm, extract_bdm,
413 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
414 (extract_bdm, extract_bdp): Correct 32 bit validation.
415 (AT1_MASK, AT2_MASK): Define.
416 (BBOAT_MASK): Define.
417 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
418 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
419 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
420 (PPCCOM32, PPCCOM64): Define.
421 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
422 and add new patterns to implement 64 bit branches with hints. Move
423 booke instructions so they match before ppc64.
425 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
426 64 bit default targets, and parse "32" and "64" in options.
428 (print_insn_powerpc): Pass dialect to operand->extract.
430 2001-11-14 Dave Brolley <brolley@redhat.com>
432 * cgen-dis.c (count_decodable_bits): New function.
433 (add_insn_to_hash_chain): New function.
434 (hash_insn_array): Call add_insn_to_hash_chain.
435 (hash_insn_list): Call add_insn_to_hash_chain.
436 * m32r-dis.c: Regenerated.
437 * fr30-dis.c: Regenerated.
439 2001-11-14 Andreas Jaeger <aj@suse.de>
441 * i386-dis.c (print_insn): Use x86-64 as option.
443 2001-11-14 Alan Modra <amodra@bigpond.net.au>
445 * disassemble.c (disassembler): Call print_insn_i386.
446 * i386-dis.c (SUFFIX_ALWAYS): Define.
447 (struct dis_private): Add orig_sizeflag.
448 (print_insn_i386): Make it a wrapper, calling..
449 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
450 warning without using volatile by moving orig_sizeflag to priv,
451 and removing inbuf. Parse disassembler_options.
452 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
454 (putop): Remove #ifdef SUFFIX_ALWAYS.
456 2001-11-11 Timothy Wall <twall@alum.mit.edu>
458 * tic54x-dis.c: Use revised opcode structure. Export opcode
460 (has_lkaddr): Don't forget about Lmem insns.
461 * tic54x-opc.c: Add emulation trap. Parallel table now uses
462 standard opcode templates.
464 2001-11-13 Zack Weinberg <zack@codesourcery.com>
466 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
467 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
468 category instead of Ew.
470 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
472 * m68k-opc.c: Fix definitions of wddata[bwl].
474 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
476 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
477 fit in the buffer, try to match the empty keyword.
479 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
481 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
482 * fr30-ibld.c: Regenerate.
483 * m32r-ibld.c: Regenerate.
484 * openrisc-ibld.c: Regenerate.
486 2001-11-04 Chris Demetriou <cgd@broadcom.com>
488 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
490 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
492 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
493 * configure: Regernate.
494 * po/fr.po: New file.
495 * po/sv.po: New file.
496 * po/tr.po: New file.
498 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
500 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
503 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
505 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
507 * Makefile.in: Regenerate.
508 * mmix-dis.c, mmix-opc.c: New files.
510 2001-10-29 Kazu Hirata <kazu@hxi.com>
512 * d30v-dis.c: Fix a comment typo.
514 2001-10-23 Chris Demetriou <cgd@broadcom.com>
516 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
517 "bltzall" as writing GPR 31 (since they do).
519 * mips-dis.c (print_insn_arg): Calculate info->target
521 (print_insn_mips): Fill in instruction info.
522 (print_mips16_insn_arg): Remove unneded variable 'val'.
523 Removed duplicated instruction target calculations,
524 calculate once and print that result. Use same idiom for
525 masking the jump segment bits as is used in print_insn_arg.
527 2001-10-20 Alan Modra <amodra@bigpond.net.au>
529 * ppc-opc.c (CT): Make it an optional operand.
531 2001-10-17 Chris Demetriou <cgd@broadcom.com>
533 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
534 SB-1 binaries include instructions specific to the SB-1.
535 * mips-opc.c (SB1): New definition.
536 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
537 "recip.ps", "rsqrt.ps", and "sqrt.ps".
539 2001-10-17 matthew green <mrg@redhat.com>
541 * ppc-opc.c (STRM): New AltiVec operand.
542 (XDSS): New AltiVec instruction form.
543 (mtvscr): Correct operand list.
544 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
546 2001-10-17 Alan Modra <amodra@bigpond.net.au>
548 * po/POTFILES.in: Regenerate.
550 2001-10-13 matthew green <mrg@redhat.com>
552 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
553 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
554 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
556 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
558 * cgen-ibld.in: Include safe-ctype.h in preference to
560 * cgen-asm.in: Include safe-ctype.h in preference to
561 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
562 TOLOWER instead of tolower.
563 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
564 string elements in constructed regular expression.
565 * fr30-asm.c: Regenerate.
566 * fr30-desc.c: Regenerate.
567 * fr30-ibld.c: Regenerate.
568 * m32r-asm.c: Regenerate.
569 * m32r-desc.c: Regenerate.
570 * m32r-ibld.c: Regenerate.
571 * openrisc-asm.c: Regenerate.
572 * openrisc-desc.c: Regenerate.
573 * openrisc-ibld.c: Regenerate.
574 * po/opcodes.pot: Regenerate.
576 2001-10-12 matthew green <mrg@redhat.com>
578 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
579 instruction field instruction/extraction functions for new BookE
580 DE form instructions.
581 (CT): New macro for CT field in an X form instruction.
582 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
584 (PPC64): Don't include PPC_OPCODE_PPC.
585 (403): New opcode macro for PPC403 processors.
586 (BOOKE): New opcode macro for BookE processors.
587 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
588 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
589 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
590 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
591 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
592 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
593 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
594 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
595 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
596 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
597 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
598 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
599 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
600 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
602 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
603 for a disassembler option of `booke', `booke32' or `booke64' to enable
604 BookE support in the disassembler.
606 2001-10-12 John Healy <jhealy@redhat.com>
608 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
609 for the length when extracting the base part of the insn.
611 2001-10-09 Bruno Haible <haible@clisp.cons.org>
613 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
614 regular expression. Fix some formatting problems.
615 * fr30-asm.c: Regenerate.
616 * openrisc-asm.c: Regenerate.
617 * m32r-asm.c: Regenerate.
619 2001-10-09 Christian Groessler <cpg@aladdin.de>
621 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
622 of indirect register memory accesses to be same format the
625 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
627 * sh-opc.h: Fix encoding of least significant nibble of the
628 DSP single data transfer instructions.
630 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
633 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
635 * cgen-asm.in: Fix compile time warning messages in generated
637 * cgen-dis.in: The same.
638 * cgen-ibld.in: The same.
639 * fr30-asm.c: Regenerate.
640 * fr30-desc.c: Regenerate.
641 * fr30-dis.c: Regenerate.
642 * fr30-ibld.c: Regenerate.
643 * fr30-opc.c: Regenerate.
644 * m32r-asm.c: Regenerate.
645 * m32r-desc.c: Regenerate.
646 * m32r-dis.c: Regenerate.
647 * m32r-ibld.c: Regenerate.
648 * m32r-opc.c: Regenerate.
649 * m32r-opinst.c Regenerate.
650 * openrisc-asm.c: Regenerate.
651 * openrisc-desc.c: Regenerate.
652 * openrisc-dis.c: Regenerate.
653 * openrisc-ibld.c: Regenerate.
654 * openrisc-opc.c: Regenerate.
655 * openrisc-opc.h: Regenerate.
656 * Makefile.in: Regenerate.
657 * po/POTFILES.in: Regenerate.
658 * po/opcodes.pot: Regenerate.
660 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
662 * arm-opc.h (arm_opcodes): Add cirrus insns.
664 * arm-dis.c (print_insn_arm): Add 'I' case.
666 2001-10-03 Alan Modra <amodra@bigpond.net.au>
668 * po/POTFILES.in: Regenerate.
669 * configure: Regenerate.
671 2001-10-02 Alan Modra <amodra@bigpond.net.au>
673 * Makefile.am (Makefile): Depend on bfd/configure.in.
675 * Makefile.in: Regenerate.
677 2001-09-30 John Healy <jhealy@redhat.com>
679 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
680 calls to cgen_get_insn_value and cgen_put_insn_value calls.
681 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
683 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
685 * Makefile.am: Update dependencies with "make dep-am".
686 * Makefile.in: Regenerate.
688 2001-09-26 Alan Modra <amodra@bigpond.net.au>
690 * arc-dis.c: Formatting fixes.
691 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
693 2001-09-21 Bruno Haible <haible@clisp.cons.org>
695 * arc-dis.c: Don't include <ctype.h>.
696 * openrisc-desc.c: Likewise.
697 * openrisc-ibld.c: Likewise.
699 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
701 * fr30-opc.c: Fix compile time warning messages.
702 * i370-opc.c: Fix compile time warning messages.
703 * i960-dis.c: Fix compile time warning messages.
704 * m32r-asm.c: Fix compile time warning messages.
705 * m32r-desc.c: Fix compile time warning messages.
706 * m32r-dis.c: Fix compile time warning messages.
707 * m32r-ibld.c: Fix compile time warning messages.
708 * m32r-opc.c: Fix compile time warning messages.
709 * m32r-opinst.c: Fix compile time warning messages.
710 * ns32k-dis.c: Fix compile time warning messages.
711 * openrisc-asm.c: Fix compile time warning messages.
712 * openrisc-desc.c: Fix compile time warning messages.
713 * openrisc-dis.c: Fix compile time warning messages.
714 * openrisc-ibld.c: Fix compile time warning messages.
715 * openrisc-opc.c: Fix compile time warning messages.
716 * pdp11-dis.c: Fix compile time warning messages.
717 * tic54x-dis.c: Fix compile time warning messages.
718 * v850-opc.c: Fix compile time warning messages.
719 * vax-dis.c: Fix compile time warning messages.
720 * w65-opc.h: Fix compile time warning messages.
721 * z8k-opc.h: Fix compile time warning messages.
722 * z8kgen.c: Fix compile time warning messages.
724 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
726 * arm-dis.c: Fix compile time warning messages.
727 * cgen-asm.c: Fix compile time warning messages.
728 * cgen-dis.c: Fix compile time warning messages.
729 * cris-dis.c: Fix compile time warning messages.
730 * d10v-dis.c: Fix compile time warning messages.
731 * fr30-asm.c: Fix compile time warning messages.
732 * fr30-desc.c: Fix compile time warning messages.
733 * fr30-dis.c: Fix compile time warning messages.
734 * fr30-ibld.c: Fix compile time warning messages.
736 2001-09-18 Bruno Haible <haible@clisp.cons.org>
738 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
739 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
740 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
741 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
743 (cgen_keyword_add): Use ISALNUM instead of isalnum.
744 (hash_keyword_name): Use TOLOWER instead of tolower.
745 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
746 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
748 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
749 * fr30-desc.c: Don't include <ctype.h>.
750 * fr30-ibld.c: Likewise.
751 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
752 (load_insn_classes, parse_resource_users, load_depfile): Use
753 ISSPACE instead of isspace.
754 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
755 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
757 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
758 * m32r-desc.c: Don't include <ctype.h>.
759 * m32r-ibld.c: Likewise.
760 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
761 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
763 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
765 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
767 * Makefile.am: Add rules and dependencies to create the s/390 opcode
768 table out of s390-opc.txt automatically.
769 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
770 * s390-mkopc.c (dumpTable): Change output to create a complete file.
771 * s390-opc.c: New improved opcode format macros and remove the
772 pregenerated opcode table.
773 * s390-opc.txt: Adapt to new improved opcode format macros.
775 2001-09-14 David Schleef <ds@schleef.org>
777 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
779 2001-09-04 Alan Modra <amodra@bigpond.net.au>
781 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
782 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
784 2001-08-31 Eric Christopher <echristo@redhat.com>
785 Jason Eckhardt <jle@redhat.com>
787 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
788 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
791 2001-08-31 Andreas Jaeger <aj@suse.de>
793 * tic54x-opc.c: Add default initializers to avoid warnings.
795 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
796 * arc-ext.c: Likewise.
798 2001-08-28 matthew gren <mrg@redhat.com>
800 * ppc-opc.c (icbt): Order correctly.
802 2001-08-27 David Edelsohn <dje@watson.ibm.com>
803 Torbjorn Granlund <tege@swox.com>
805 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
807 (insert_ds): Complain if not a multiple of 4.
809 (XSYNC_MASK): Define.
810 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
811 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
813 2001-08-26 Andreas Jaeger <aj@suse.de>
815 * h8500-opc.h: Add default initializers to h8500_table to shut up
818 2001-08-25 Andreas Jaeger <aj@suse.de>
820 * tic54x-dis.c: Add unused attributes where needed.
822 * z8k-dis.c (output_instr): Add unused attribute.
824 * h8300-dis.c: Add missing prototypes.
825 (bfd_h8_disassemble): Make static.
827 * cris-dis.c: Add missing prototype.
828 * h8500-dis.c: Likewise.
829 * m68hc11-dis.c: Likewise.
830 * pj-dis.c: Likewise.
831 * tic54x-dis.c: Likewise.
832 * v850-dis.c: Likewise.
833 * vax-dis.c: Likewise.
834 * w65-dis.c: Likewise.
835 * z8k-dis.c: Likewise.
837 * d10v-dis.c: Add missing prototype.
838 (dis_long): Remove unused variable.
839 (dis_2_short): Likewise.
841 * sh-dis.c: Add missing prototypes.
842 * v850-opc.c: Likewise.
843 Add unused attributes where needed.
845 * ns32k-dis.c: Add missing prototypes.
846 (bit_extract_simple): Remove unused variable.
848 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
850 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
851 branch instructions for gcc 3.0.
852 * opcodes/s390-opc.txt: Likewise.
854 2001-08-21 Andreas Jaeger <aj@suse.de>
856 * i960-dis.c: Add parameters for prototypes
857 (ctrl): Add unused attributes.
861 * mips-dis.c: Add missing prototypes.
862 * a29k-dis.c: Likewise.
863 * arc-dis.c: Likewise.
864 * ia64-opc.c: Likewise.
866 * s390-dis.c: Add missing prototypes.
867 (init_disasm): Remove unused attribute since the parameter is
870 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
872 * mips-opc.c (M1): Define. Reformatted Code.
873 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
876 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
878 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
879 the corresponding non-likely insn is in MIPS I.
881 2001-08-13 Kazu Hirata <kazu@hxi.com>
883 * mcore-dis.c: Fix formatting.
884 * mips-dis.c: Likewise.
885 * pj-dis.c: Likewise.
886 * z8k-dis.c: Likewise.
888 2001-08-12 Richard Henderson <rth@redhat.com>
890 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
891 to *VALUEP. Regenerate all cgen files.
893 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
895 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
897 * mips-opc.c (G6): Undefine.
898 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
899 as the first "move" alternative.
901 2001-08-10 Andreas Jaeger <aj@suse.de>
903 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
905 * configure: Regenerate.
907 2001-08-10 Alan Modra <amodra@bigpond.net.au>
909 * ppc-opc.c: Revert 2001-08-08.
911 2001-08-09 Alan Modra <amodra@bigpond.net.au>
913 * dis-buf.c (generic_strcat_address): Add missing prototype.
914 #if 0 the functions as it is unused.
916 2001-08-08 Alan Modra <amodra@bigpond.net.au>
918 1999-10-25 Torbjorn Granlund <tege@swox.com>
919 * ppc-opc.c: Include "bfd.h".
920 (powerpc_operands): Add new field for reloc type.
922 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
924 * mips-dis.c (print_insn_arg): Don't use software integer registers
925 for coprocessor registers.
926 (get_mips_isa): Removed.
927 (is_newabi): New function, checks if NewABI is used.
928 (_print_insn_mips): Get distinction between old ABI and new ABI right.
930 2001-08-01 Christian Groessler <cpg@aladdin.de>
932 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
933 get stderr definition.
934 (internal, gas): Removed warnings.
935 (gas): Create a correct final entry for created array.
936 * z8k-opc.h: Recreated with new z8kgen.
938 2001-07-28 Kazu Hirata <kazu@hxi.com>
940 * i386-dis.c: Fix formatting.
942 2001-07-28 Matthias Kramm <kramm@quiss.org>
944 * i386-dis.c: Change formatting conventions for architecture
945 i386:intel to better match the format of various intel i386
946 assemblers, like nasm, tasm or masm.
948 2001-07-24 Alan Modra <amodra@bigpond.net.au>
950 * Makefile.am: Update dependencies with "make dep-am".
951 * Makefile.in: Regenerate
953 2001-07-24 Kazu Hirata <kazu@hxi.com>
955 * alpha-dis.c: Fix formatting.
956 * cris-dis.c: Likewise.
957 * d10v-dis.c: Likewise.
958 * d30v-dis.c: Likewise.
959 * m10300-dis.c: Likewise.
960 * tic54x-dis.c: Likewise.
962 2001-07-23 Kazu Hirata <kazu@hxi.com>
964 * m68k-dis.c: Fix formatting.
965 * pj-dis.c: Likewise.
966 * s390-dis.c: Likewise.
967 * z8k-dis.c: Likewise.
969 2001-07-21 Chris Demetriou <cgd@broadcom.com>
971 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
972 into the rest of the surrounding definitions.
974 2001-07-18 Alan Modra <amodra@bigpond.net.au>
976 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
977 for lgdt, lidt, sgdt, sidt.
979 2001-07-13 Philip Blundell <philb@gnu.org>
981 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
983 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
985 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
987 (@arch@_cgen_build_insn_regex): New routine from Graydon.
988 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
989 to verify if it is worth parsing the insn as insn "x". Also update
990 error message when insn is not a recognized format of the insn vs
991 when the insn is completely unrecognized.
993 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
995 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
997 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
998 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1000 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1002 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1003 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1004 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1006 2001-07-05 Ben Elliston <bje@redhat.com>
1008 * Makefile.am (CPUDIR): Define.
1009 (stamp-m32r): Update dependencies.
1010 (stamp-fr30): Ditto.
1011 (stamp-openrisc): Ditto.
1012 * Makefile.in: Regenerate.
1014 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1016 * ppc-opc.c: Fix encoding of 'clf' instruction.
1018 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1020 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1022 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1024 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1025 * cgen-opc.c (cgen_keyword_add): Ignore special first
1026 character when building nonalpha_chars field.
1028 2001-06-24 Ben Elliston <bje@redhat.com>
1030 * m88k-dis.c: Format to conform to GNU coding standards.
1032 2001-06-23 Andreas Jaeger <aj@suse.de>
1034 * disassemble.c (disassembler_usage): Add unused attribute.
1036 2001-06-22 Eric Christopher <echristo@redhat.com>
1038 * mips-opc.c: Move prefx to start of the table.
1040 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1042 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1045 2001-06-22 Pauli <pauli@moreton.com.au>
1047 * m68k-opc.c: Add wdebug instruction.
1049 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1051 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1053 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1055 * cgen-asm.c (cgen_parse_keyword): When looking for the
1056 boundaries of a keyword, allow any special characters
1057 that are actually in one of the allowed keyword.
1058 * cgen-opc.c (cgen_keyword_add): Add any special characters
1059 to the nonalpha_chars field.
1061 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1063 * s390-opc.c: Add lgh instruction.
1064 * s390-opc.txt: Likewise.
1066 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1068 * i386-dis.c: Group function prototypes in one place.
1069 (FLOATCODE): Redefine as 1.
1070 (USE_GROUPS): Redefine as 2.
1071 (USE_PREFIX_USER_TABLE): Redefine as 3.
1072 (X86_64_SPECIAL): Define as 4.
1073 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1074 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1075 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1076 (dis386): New table combining above four tables.
1077 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1078 (dis386_twobyte): New table combining above two tables.
1079 (x86_64_table): New table to handle x86_64.
1081 (float_mem_att, float_mem_intel): Delet.
1082 (float_mem): New table combining above two tables.
1083 (print_insn_i386): Modify for above.
1084 (dofloat): Likewise.
1085 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1086 Return 0 on success, 1 if no valid alternative.
1087 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1088 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1089 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1090 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1092 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1093 (OP_I64): If not 64-bit mode, call OP_I.
1094 OP_OFF64): If not 64-bit mode, call OP_OFF.
1095 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1096 'ignore'/'ignored' to 'bytemode'.
1098 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1100 * configure.in: Sort 'ta' case statement.
1101 * configure: Regenerate.
1103 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1105 (disx86_64_att): Likewise.
1106 (dis386_twobyte_att): Likewise.
1107 (print_insn_i386): Don't print branch hints as a prefix.
1108 (putop): 'H' macro prints branch hints.
1109 (get64): Kill compile warnings.
1111 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1113 * sh-opc.h (sh_table): Don't use empty initializers.
1115 2001-06-06 Christian Groessler <cpg@aladdin.de>
1117 * z8k-dis.c: Fix formatting.
1118 (unpack_instr): Remove unused cases in switch statement. Add
1119 safety abort() in default case.
1120 (unparse_instr): Add safety abort() in default case.
1122 2001-06-06 Peter Jakubek <pjak@snafu.de>
1124 * m68k-dis.c (print_insn_m68k): Fix typo.
1125 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1126 mcf (ColdFire) div, rem and moveb instructions.
1128 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1130 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1131 (cond_jump_mode, loop_jcxz_mode): Define.
1132 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1133 appropriate, and 'F' suffix to loop insns.
1134 (disx86_64_att): Likewise.
1135 (dis386_twobyte_att): Likewise.
1136 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1137 Output data size prefix for long conditional jumps. Output cs and
1139 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1140 (OP_J): Don't make PREFIX_DATA used.
1142 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1144 * sh-opc.h (sh_table): Complete last element entry to avoid
1147 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1149 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1151 2001-05-23 Alan Modra <amodra@one.net.au>
1153 * arc-opc.c: Whitespace changes.
1155 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1157 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1160 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1162 * cgen-dis.in (extract_normal): Complete support for min<base case.
1164 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1166 * mips-dis.c (INSNLEN): Rename MAXLEN.
1167 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1168 (print_insn_arg): Remove $ prefix of register names.
1169 (set_mips_isa_type): Remove.
1170 (mips_isa_type): New function.
1171 (get_mips_isa): New Function.
1172 (print_insn_mips): Rename _print_insn_mips.
1173 (_print_insn_mips): New function, contains code which was
1174 duplicated in print_insn_big_mips and print_insn_little_mips.
1175 (print_insn_big_mips): Moved code to _print_insn_mips.
1176 (print_insn_little_mips): Likewise.
1177 (print_mips16_insn_arg): Remove $ prefix of register names.
1178 Print error message before abort.
1180 2001-05-14 J.T. Conklin <jtc@redback.com>
1182 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1183 simplified mnemonics used for setting PPC750-specific special
1186 2001-05-12 H.J. Lu <hjl@gnu.org>
1188 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1191 2001-05-12 Peter Targett <peter.targett@arccores.com>
1193 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1194 register to r/w. Formatting fixes throughout file.
1196 2001-05-12 Alan Modra <amodra@one.net.au>
1198 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1200 (twobyte_has_modrm): Update table.
1201 (need_modrm): Give it file scope.
1202 (MODRM_CHECK): Define.
1203 (dofloat): Use MODRM_CHECK.
1208 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1210 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1211 even at end of a section.
1212 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1213 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1215 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1217 * disassemble.c (disassembler_usage): Remove unused attribute.
1219 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1221 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1223 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1225 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1226 assume incoming buffer already has the base insn loaded. Handle
1227 smaller-than-base instructions for variable-length case.
1229 2001-05-04 Alan Modra <amodra@one.net.au>
1231 * i386-dis.c (Ev, Ed): Remove duplicate define.
1234 (OP_XS): New function.
1235 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1237 (dis386_twobyte_intel): Likewise.
1238 (prefix_user_table): Use MS for maskmovq operand.
1240 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1242 * Makefile.am: Add OpenRISC target.
1243 * Makefile.in: Regenerated.
1245 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1247 * configure.in (bfd_openrisc_arch): Add target.
1248 * configure: Regenerated.
1250 * openrisc-asm.c: New file.
1251 * openrisc-desc.c: Likewise.
1252 * openrisc-desc.h: Likewise.
1253 * openrisc-dis.c: Likewise.
1254 * openrisc-ibld.c: Likewise.
1255 * openrisc-opc.c: Likewise.
1256 * openrisc-opc.h: Likewise.
1258 2001-04-24 Christian Groessler <cpg@aladdin.de>
1260 * z8k-dis.c: add names of control registers (ctrl_names);
1261 (seg_length): provides instruction length fixup for segmented
1262 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1263 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1264 (unparse_intr): handle CLASS_PR, print addresses without '#'
1265 * z8k-opc.h: re-created with new z8kgen
1266 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1267 entries for ldctl/ldctlb instruction
1269 2001-04-06 Andreas Jaeger <aj@suse.de>
1271 * i386-dis.c: Add ffreep instruction.
1273 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1275 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1277 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1279 * i386-dis.c (PREGRP25): Define.
1280 (dis386_twobyte_att): Use here in place of "movntq" entry.
1281 (dis386_twobyte_intel): Likewise.
1282 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1284 (dis386_twobyte_att): Use here.
1285 (dis386_twobyte_intel): Likewise.
1286 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1287 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1288 (prefix_user_table): Cosmetic changes to "bad" entries.
1290 2001-03-23 Nick Clifton <nickc@redhat.com>
1292 * mips-opc.c: Remove extraneous whitespace.
1293 * mips-dis.c: Remove extraneous whitespace.
1295 2001-03-22 Ben Elliston <bje@redhat.com>
1297 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1298 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1299 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1300 to allay a compiler warning.
1302 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1304 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1305 (dis386_twobyte_intel): Likewise.
1306 (twobyte_has_modrm): Set entry for paddq, psubq.
1308 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1310 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1311 determination via CGEN_COMPUTE_MACH.
1312 * fr30-desc.c: Regenerate.
1313 * fr30-dis.c: Regenerate.
1314 * fr30-opc.h: Regenerate.
1315 * m32r-desc.c: Regenerate.
1316 * m32r-dis.c: Regenerate.
1317 * m32r-opc.h: Regenerate.
1318 * m32r-opinst.c: Regenerate.
1320 2001-03-20 H.J. Lu <hjl@gnu.org>
1322 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1323 * configure: Rebuild.
1325 2001-03-19 Jim Wilson <wilson@redhat.com>
1327 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1328 notestr if larger than xsect.
1329 (in_class): Handle format M5.
1330 * ia64-asmtab.c: Regnerate.
1332 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1334 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1335 has more than one byte left to read.
1337 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1339 * s390-opc.c: Add new opcodes. Smooth out formatting.
1340 * s390-opc.txt: Add new opcodes.
1342 2001-03-06 Nick Clifton <nickc@redhat.com>
1344 * arm-dis.c (print_insn_thumb): Compute destination address
1345 of BLX(1) instruction by taking bit 1 from PC and not from bit
1348 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1350 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1351 so command line switches will work.
1353 2001-03-05 Dave Brolley <brolley@redhat.com>
1355 * fr30-asm.c: Regenerate.
1356 * fr30-desc.c: Regenerate.
1357 * fr30-desc.h: Regenerate.
1358 * fr30-dis.c: Regenerate.
1359 * fr30-ibld.c: Regenerate.
1360 * fr30-opc.c: Regenerate.
1361 * fr30-opc.h: Regenerate.
1362 * m32r-asm.c: Regenerate.
1363 * m32r-desc.c: Regenerate.
1364 * m32r-desc.h: Regenerate.
1365 * m32r-dis.c: Regenerate.
1366 * m32r-ibld.c: Regenerate.
1367 * m32r-opc.c: Regenerate.
1368 * m32r-opc.h: Regenerate.
1369 * m32r-opinst.c: Regenerate.
1371 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1373 * m68k-opc.c: fix cpushl according to Motorola. Enable
1374 bunch of instructions for Coldfire 5407 and add all new.
1376 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1378 * configure.in (BFD_VERSION): Do without grep.
1379 * configure: Regenerate.
1380 * Makefile.am: Run "make dep-am".
1381 * Makefile.in: Regenerate.
1383 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1385 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1386 * ia64-asmtab.c: Regenerate.
1388 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1390 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1391 separate variants: one for IMM22 and the other for IMM14.
1392 * ia64-asmtab.c: Regenerate.
1394 2001-02-21 Greg McGary <greg@mcgary.org>
1396 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1398 2001-02-20 H.J. Lu <hjl@gnu.org>
1400 * Makefile.am (ia64-ic.tbl): Remove the target.
1401 (ia64-raw.tbl): Likewise.
1402 (ia64-waw.tbl): Likewise.
1403 (ia64-war.tbl): Likewise.
1404 (ia64-asmtab.c): Generate it in the source directory.
1405 * Makefile.in: Regenerated.
1407 2001-02-18 lars brinkhoff <lars@nocrew.org>
1409 * Makefile.am: Add PDP-11 target.
1410 * configure.in: Likewise.
1411 * disassemble.c: Likewise.
1412 * pdp11-dis.c: New file.
1413 * pdp11-opc.c: New file.
1415 2001-02-14 Jim Wilson <wilson@redhat.com>
1417 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1418 * ia64-asmtab.c: Regenerate.
1420 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1422 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1426 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1428 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1429 the following instruction not of the jump itself for the jump
1431 (print_mips16_insn_arg): Likewise.
1433 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1435 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1437 * Makefile.in: Regenerate.
1439 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1441 * Makefile.am: Add linux target for S/390.
1442 * Makefile.in: Likewise.
1443 * configure.in: Likewise.
1444 * disassemble.c: Likewise.
1445 * s390-dis.c: New file.
1446 * s390-mkopc.c: New file.
1447 * s390-opc.c: New file.
1448 * s390-opc.txt: New file.
1450 2001-02-05 Jim Wilson <wilson@redhat.com>
1452 * ia64-asmtab.c: Revert 2000-12-16 change.
1454 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1456 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1457 * m32r-desc.h: Regenerate.
1459 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1461 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1462 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1464 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1466 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1468 2001-01-13 Nick Clifton <nickc@redhat.com>
1470 * disassemble.c: Remove spurious white space.
1472 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1474 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1477 2001-01-11 Peter Targett <peter.targett@arccores.com>
1479 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1480 * Makefile.am (C_FILES): Add arc-ext.c.
1481 (ALL_MACHINES) Add arc-ext.lo.
1482 (INCLUDES) Add opcode directory to list.
1483 New dependency entry for arc-ext.lo.
1484 * disassemble.c (disassembler): Correct call to
1485 arc_get_disassembler.
1486 * arc-opc.c: New update for ARC, including full base
1487 instructions for ARC variants.
1488 * arc-dis.h, arc-dis.c: New update for ARC, including
1489 extensibility functionality.
1490 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1492 2001-01-10 Jan Hubicka <jh@suse.cz>
1494 * i386-dis.c (PREGRP15 - PREGRP24): New.
1495 (dis386_twobyt): Add SSE2 instructions.
1496 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1497 (twobyte_uses_f3_prefix): ... this one.
1498 (grps): Add SSE instructions.
1499 (prefix_user_table): Add two new slots; add SSE2 instructions.
1500 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1501 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1502 to prefix_user_table.
1503 (OP_E): Accept mfence and lfence as well.
1504 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1505 (OP_XMM): Support REX extensions.
1509 2001-01-09 Nick Clifton <nickc@redhat.com>
1511 * arm-dis.c (print_insn): Set pc to zero for instructions with
1512 a reloc associated with them.
1514 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1516 * cgen-asm.in (parse_insn_normal): Changed syn to be
1517 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1518 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1519 to '\0' to use 0 instead.
1520 * cgen-dis.in (print_insn_normal): Ditto.
1521 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1523 2001-01-05 Jan Hubicka <jh@suse.cz>
1525 * i386-dis.c: Add x86_64 support.
1526 (rex): New static variable.
1527 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1528 (USED_REX): New macro.
1529 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1530 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1531 (OP_REG, OP_OFF): Declare.
1532 (get64, get32, get32s): New functions.
1533 (r??_reg): New constants.
1534 (dis386_att): Change templates of instruction implicitly promoted
1535 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1537 (dis386_intel): Likewise.
1538 (dixx86_64_att): New table based on dis386_att.
1539 (dixx86_64_intel): New table based on dis386_intel.
1540 (names64, names8rex): New global variable.
1541 (names32, names16): Add extended registers.
1542 (prefix_user_t): Recognize rex prefixes.
1543 (prefix_name): Print REX prefixes nicely.
1544 (op_riprel): New global variable.
1545 (start_pc): Set type to bfd_vma.
1546 (print_insn_i386): Detect the 64bit mode and use proper table;
1547 move ckprefix after initializing the buffer; output unused rex prefixes;
1548 output information about target of RIP relative addresses.
1549 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1550 (print_operand_value): New function.
1551 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1552 REX prefix and new modes.
1553 (get64, get32s): New.
1554 (get32): Return bfd_signed_vma type.
1555 (set_op): Initialize the op_riprel.
1556 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1558 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1560 cgen-dis.in (read_insn): Use bfd_get_bits()
1562 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1564 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1565 (hash_insn_list): Likewise
1566 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1567 (extract_1): Use bfd_get_bits().
1568 (extract_normal): Apply sign extension to both extraction
1570 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1571 (cgen_put_insn_value): Use bfd_put_bits()
1573 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1575 * cgen-asm.in (parse_insn_normal): Print better error message for
1576 instructions with missing operands.
1578 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1580 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1582 2000-12-16 Nick Clifton <nickc@redhat.com>
1584 * Makefile.in: Regenerate.
1585 * aclocal.m4: Regenerate.
1586 * config.in: Regenerate.
1587 * configure.in: Add spacing.
1588 * configure: Regenerate.
1589 * ia64-asmtab.c: Regenerate.
1590 * po/opcodes.pot: Regenerate.
1592 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1594 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1595 error messages over later parse-time ones.
1597 2000-12-12 Jim Wilson <wilson@redhat.com>
1599 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1601 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1602 (print_dependency_table): Print NULL if semantics field not set.
1603 (insert_opcode_dependencies): Mark cmp parameter as unused.
1604 (print_main_table): Use fprintf_vma to print long long fields.
1605 (main): Mark argv paramter as unused. Convert to old style definition.
1606 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1607 * ia64-asmtab.c: Regnerate.
1609 2000-12-09 Nick Clifton <nickc@redhat.com>
1611 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1614 * fr30-dis.c: Regenerate.
1616 2000-12-08 Peter Targett <peter.targett@arccores.com>
1618 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1619 * Makefile.am (C_FILES): Add arc-ext.c.
1620 (ALL_MACHINES) Add arc-ext.lo.
1621 (INCLUDES) Add opcode directory to list.
1622 New dependency entry for arc-ext.lo.
1623 * disassemble.c (disassembler): Correct call to
1624 arc_get_disassembler.
1625 * arc-opc.c: New update for ARC, including full base
1626 instructions for ARC variants.
1627 * arc-dis.h, arc-dis.c: New update for ARC, including
1628 extensibility functionality.
1629 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1631 2000-12-03 Chris Demetriou cgd@sibyte.com
1633 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1634 MOD_HILO, and MOD_LO macros.
1636 * mips-opc.c (M1, M2): Delete.
1637 (mips_builtin_opcodes): Remove all uses of M1.
1639 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1640 instructions take "G" format second operands and use the
1642 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1644 Delete "sel" code operands from mfc1 and mtc1.
1645 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1648 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1649 Chris Demetriou cgd@sibyte.com
1651 * mips-opc.c (mips_builtin_opcodes): Finish additions
1652 for MIPS32 support, and clean up existing entries for
1653 aesthetics, consistency with the MIPS32 ISA, and
1654 with consistency the rest of the table.
1656 2000-12-01 Nick Clifton <nickc@redhat.com>
1658 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1661 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1663 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1664 specifiers. Update 'B' for new constant names, and remove
1666 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1667 near the top of the array, so they are disassembled properly.
1668 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1669 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1670 specifier. Add 'H' format specifier variants for "mfc1,"
1671 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1672 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1673 "wait" variant which uses 'J' operand specifier.
1675 * mips-dis.c (set_mips_isa_type): Update to use
1676 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1677 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1678 * mips-opc.c (I32): New constant for instructions added in
1681 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1683 * mips-dis.c (set_mips_isa_type): Add cases for
1684 bfd_mach_mips5 and bfd_mach_mips64.
1685 * mips-opc.c (I64): New definitions.
1687 * mips-dis.c (set_mips_isa_type): Add case for
1690 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1692 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1693 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1694 Initialize variable dc to NULL.
1695 (print_insn_shx): Remove unused label d_reg_n.
1697 2000-11-24 Nick Clifton <nickc@redhat.com>
1699 * arm-opc.h: Add new opcode formatting parameter 'B'.
1700 (arm_opcodes): Add XScale, v5, and v5te instructions.
1701 (thumb_opcodes): Add v5t instructions.
1703 * arm-dis.c (print_insn_arm): Handle new 'B' format
1705 (print_insn_thumb): Decode BLX(1) instruction.
1707 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1709 * mips-opc.c: Fix file header comment.
1711 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1713 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1714 print_insn_cris_with_register_prefix.
1716 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1718 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1720 2000-11-07 Matthew Green <mrg@redhat.com>
1722 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1723 must be loaded there in their entirety.
1725 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1727 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1728 (compute_arch_mask): Add v8plusb and v9b machines.
1729 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1730 * sparc-opc.c: Support for Cheetah instruction set.
1731 (prefetch_table): Add #invalidate.
1733 2000-10-16 Nick Clifton <nickc@redhat.com>
1735 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1737 2000-10-06 Dave Brolley <brolley@redhat.com>
1739 * fr30-desc.h: Regenerate.
1740 * m32r-desc.h: Regenerate.
1741 * m32r-ibld.c: Regenerate.
1743 2000-10-05 Jim Wilson <wilson@redhat.com>
1745 * ia64-ic.tbl: Update from Intel.
1746 * ia64-asmtab.c: Regenerate.
1748 2000-10-04 Kazu Hirata <kazu@hxi.com>
1750 * ia64-gen.c: Convert C++-style comments to C-style comments.
1751 * tic54x-dis.c: Likewise.
1753 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1755 Changes to add dollar prefix to registers for files where user symbols
1756 don't have a leading underscore. Fix formatting.
1757 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1758 (format_reg): Add parameter with_reg_prefix. All callers changed.
1759 (print_with_operands): Ditto.
1760 (print_insn_cris_generic): Renamed from print_insn_cris, add
1761 parameter with_reg_prefix.
1762 (print_insn_cris_with_register_prefix,
1763 print_insn_cris_without_register_prefix, cris_get_disassembler):
1765 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1767 2000-09-22 Jim Wilson <wilson@redhat.com>
1769 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1770 gt, ge, ngt, and nge.
1771 * ia64-asmtab.c: Regenerate.
1773 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1774 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1775 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1776 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1777 * ia64-asmtab.c: Regnerate.
1779 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1781 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1782 Add mfc0 and mtc0 with sub-selection values.
1783 Add clo and clz opcodes.
1784 Add msub and msubu instructions for MIPS32.
1785 Add madd/maddu aliases for mad/madu for MIPS32.
1786 Support wait, deret, eret, movn, pref for MIPS32.
1787 Support tlbp, tlbr, tlbwi, tlbwr.
1790 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1791 (print_insn_arg): Handle 'H' args.
1792 (set_mips_isa_type): Recognize 4K.
1793 Use CPU_* defines instead of hardcoded numbers.
1795 2000-09-11 Catherine Moore <clm@redhat.com>
1797 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1798 (d30v_format_tab): Use Rb2 for modinc and moddec.
1800 2000-09-07 Catherine Moore <clm@redhat.com>
1802 * d30v-opc.c (d30v_format_tab): Use format Ra for
1805 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1807 * configure: Rebuilt with new libtool.m4.
1809 2000-09-05 Nick Clifton <nickc@redhat.com>
1811 * configure: Regenerate.
1812 * po/opcodes.pot: Regenerate.
1814 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1816 * acinclude.m4: Include libtool and gettext macros from the
1818 * aclocal.m4, configure: Rebuilt.
1820 2000-08-30 Kazu Hirata <kazu@hxi.com>
1822 * tic80-dis.c: Fix formatting.
1824 2000-08-29 Kazu Hirata <kazu@hxi.com>
1826 * w65-dis.c: Fix formatting.
1828 2000-08-28 Mark Hatle <mhatle@mvista.com>
1830 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1831 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1832 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1833 instructions. Added extended mnemonic mftbl as defined in the
1834 405GP manual for all PPCs.
1836 2000-08-28 Jim Wilson <wilson@redhat.com>
1838 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1839 call. Change last goto to use failed instead of done.
1841 2000-08-28 Dave Brolley <brolley@redhat.com>
1843 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1844 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1845 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1846 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1847 * cgen-dis.in (read_insn): New static function.
1848 (print_insn): Use read_insn to read the insn into the buffer and set
1850 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1852 * fr30-asm.c: Regenerated.
1853 * fr30-desc.c: Regenerated.
1854 * fr30-desc.h: Regenerated.
1855 * fr30-dis.c: Regenerated.
1856 * fr30-ibld.c: Regenerated.
1857 * fr30-opc.c: Regenerated.
1858 * fr30-opc.h: Regenerated.
1859 * m32r-asm.c: Regenerated.
1860 * m32r-desc.c: Regenerated.
1861 * m32r-desc.h: Regenerated.
1862 * m32r-dis.c: Regenerated.
1863 * m32r-ibld.c: Regenerated.
1864 * m32r-opc.c: Regenerated.
1866 2000-08-28 Kazu Hirata <kazu@hxi.com>
1868 * tic30-dis.c: Fix formatting.
1870 2000-08-27 Kazu Hirata <kazu@hxi.com>
1872 * sh-dis.c: Fix formatting.
1874 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1876 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1878 2000-08-24 Kazu Hirata <kazu@hxi.com>
1880 * z8k-dis.c: Fix formatting.
1882 2000-08-16 Jim Wilson <wilson@redhat.com>
1884 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1885 break, mov-immediate, nop.
1886 * ia64-opc-f.c: Delete fpsub instructions.
1887 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1888 address operand. Rewrite using macros to avoid long lines.
1889 * ia64-opc.h (POSTINC): Define.
1890 * ia64-asmtab.c: Regenerate.
1892 2000-08-15 Jim Wilson <wilson@redhat.com>
1894 * ia64-ic.tbl: Add missing entries.
1896 2000-08-08 Jason Eckhardt <jle@redhat.com>
1898 * i860-dis.c (print_br_address): Change third argument from int
1901 2000-08-07 Richard Henderson <rth@redhat.com>
1903 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1904 for MLI templates. Handle IA64_OPND_TGT64.
1906 2000-08-04 Ben Elliston <bje@redhat.com>
1908 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1909 * cgen.sh: Likewise.
1911 2000-08-02 Jim Wilson <wilson@redhat.com>
1913 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1915 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1917 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1918 Change return type from void to int. Check the combination
1919 of operands, return 1 if valid. Fix to avoid BUF overflow.
1920 Report undefined combinations of operands in COMMENT.
1921 Report internal errors to stderr. Output the adiw/sbiw
1922 constant operand in both decimal and hex.
1923 (print_insn_avr): Disassemble ldd/std with displacement of 0
1924 as ld/st. Check avr_operand () return value, handle invalid
1925 combinations of operands like unknown opcodes.
1927 2000-07-28 Ben Elliston <bje@redhat.com>
1929 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1930 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1931 * Makefile.in: Regenerate.
1932 * configure.in: Add --enable-cgen-maint option.
1933 * configure: Regenerate.
1935 2000-07-26 Dave Brolley <brolley@redhat.com>
1937 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1938 (cgen_hw_lookup_by_num): Ditto.
1939 (cgen_operand_lookup_by_name): Ditto.
1940 (print_address): Ditto.
1941 (print_keyword): Ditto.
1942 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1944 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1946 (cgen_parse_keyword): Ditto.
1948 2000-07-22 Jason Eckhardt <jle@redhat.com>
1950 * i860-dis.c: New file.
1951 (print_insn_i860): New function.
1952 (print_br_address): New function.
1953 (sign_extend): New function.
1954 (BITWISE_OP): New macro.
1955 (I860_REG_PREFIX): New macro.
1956 (grnames, frnames, crnames): New structures.
1958 * disassemble.c (ARCH_i860): Define.
1959 (disassembler): Add check for bfd_arch_i860 to set disassemble
1960 function to print_insn_i860.
1962 * Makefile.in (CFILES): Added i860-dis.c.
1963 (ALL_MACHINES): Added i860-dis.lo.
1964 (i860-dis.lo): New dependences.
1966 * configure.in: New bits for bfd_i860_arch.
1968 * configure: Regenerated.
1970 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1972 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1973 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1974 (cris-dis.lo, cris-opc.lo): New rules.
1975 * Makefile.in: Rebuild.
1976 * configure.in (bfd_cris_arch): New target.
1977 * configure: Rebuild.
1978 * disassemble.c (ARCH_cris): Define.
1979 (disassembler): Support ARCH_cris.
1980 * cris-dis.c, cris-opc.c: New files.
1981 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1983 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1985 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1986 Reported by Bill Clarke <llib@computer.org>.
1988 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1990 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1991 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1993 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1995 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1996 fput_const, extract_3, extract_5_load, extract_5_store,
1997 extract_5r_store, extract_5R_store, extract_10U_store,
1998 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1999 extract_12, extract_17, extract_22): Prototype.
2000 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2001 shadowing outer block.
2004 2000-07-05 DJ Delorie <dj@redhat.com>
2008 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2010 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2012 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2014 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2015 marked for translation (exception from the usual coding style).
2016 (print_insn_avr): Initialize insn2 to avoid warnings.
2018 2000-07-03 Kazu Hirata <kazu@hxi.com>
2020 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2021 * h8500-dis.c: Fix formatting.
2023 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2025 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2026 (CLEANFILES): Add DEPA.
2027 * Makefile.in: Regenerate.
2029 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2031 * arm-dis.c (regnames): Add an additional register set to match
2032 the set used by GCC. Make it the default.
2034 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2036 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2038 * Makefile.in: Regenerate.
2040 2000-06-20 H.J. Lu <hjl@gnu.org>
2042 * Makefile.am: Rebuild dependency.
2043 * Makefile.in: Rebuild.
2045 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2047 * Makefile.in, configure: regenerate
2048 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2050 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2052 * configure.in: Recognize m68hc12 and m68hc11.
2053 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2054 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2055 and opcode generation for m68hc11 and m68hc12.
2057 2000-06-16 Nick Duffek <nsd@redhat.com>
2059 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2060 bfd_mach_ppc_620 instead of 620.
2062 2000-06-12 Kazu Hirata <kazu@hxi.com>
2064 * h8300-dis.c: Fix formatting.
2065 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2068 2000-06-09 Denis Chertykov <denisc@overta.ru>
2070 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2072 2000-06-07 Denis Chertykov <denisc@overta.ru>
2074 * avr-dis.c: completely rewritten.
2076 2000-06-02 Kazu Hirata <kazu@hxi.com>
2078 * h8300-dis.c: Follow the GNU coding style.
2079 (bfd_h8_disassemble) Fix a typo.
2081 2000-06-01 Kazu Hirata <kazu@hxi.com>
2083 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2084 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2085 correctly. Fix a typo.
2087 2000-05-31 Nick Clifton <nickc@redhat.com>
2089 * opintl.h (_(String)): Explain why dgettext is used instead of
2092 2000-05-30 Nick Clifton <nickc@redhat.com>
2094 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2095 bindtextdomain): Replace defines with those from intl/libgettext.h
2096 to quieten gcc warnings.
2098 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2100 * Makefile.am: Update dependencies with "make dep-am"
2101 * Makefile.in: Regenerate.
2103 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2105 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2106 sign-extending operands.
2108 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2110 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2113 2000-05-21 Nick Clifton <nickc@redhat.com>
2115 * Makefile.am (LIBIBERTY): Define.
2117 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2119 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2120 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2121 (reg_names): Rename to std_reg_names. Change it to a char **
2123 (std_reg_names): New name for reg_names.
2124 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2127 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2129 * fr30-desc.h: Partially regenerated to account for changed
2130 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2131 * m32r-desc.h: Ditto.
2133 2000-05-15 Nick Clifton <nickc@redhat.com>
2135 * arm-opc.h: Use upper case for flasg in MSR and MRS
2136 instructions. Allow any bit to be set in the field_mask of
2137 the MSR instruction.
2139 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2140 field_mask of an MSR instruction.
2142 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2144 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2145 instructions changed to ldrsb/ldrsh.
2147 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2149 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2150 target addresses for 'jal' and 'j'.
2152 2000-05-10 Geoff Keating <geoffk@redhat.com>
2154 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2155 also available in common mode when powerpc syntax is being used.
2157 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2159 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2160 (dummy_print_address): Ditto.
2162 2000-05-04 Timothy Wall <twall@redhat.com>
2164 * tic54x-opc.c: New.
2165 * tic54x-dis.c: New.
2166 * disassemble.c (disassembler): Add ARCH_tic54x.
2167 * configure.in: Added tic54x target.
2169 * Makefile.am: Add tic54x dependencies.
2170 * Makefile.in: Ditto.
2172 2000-05-03 J.T. Conklin <jtc@redback.com>
2174 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2175 vector unit operands.
2176 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2177 unit instruction formats.
2178 (PPCVEC): New macro, mask for vector instructions.
2179 (powerpc_operands): Add table entries for above operand types.
2180 (powerpc_opcodes): Add table entries for vector instructions.
2182 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2183 (print_insn_little_powerpc): Likewise.
2184 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2186 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2188 * configure.in: Add bfd_powerpc_64_arch.
2189 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2192 2000-04-24 Nick Clifton <nickc@redhat.com>
2194 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2197 2000-04-23 Denis Chertykov <denisc@overta.ru>
2199 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2201 (reg_fmul_r): New. Extract source register from FMUL instruction.
2202 (reg_muls_d): New. Extract destination register from MULS instruction.
2203 (reg_muls_r): New. Extract source register from MULS instruction.
2204 (reg_movw_d): New. Extract destination register from MOVW instruction.
2205 (reg_movw_r): New. Extract source register from MOVW instruction.
2206 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2207 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2209 2000-04-22 Timothy Wall <twall@redhat.com>
2211 * ia64-gen.c (general): Add an ordered table of primary
2212 opcode names, as well as priority fields to disassembly data
2213 structures to enforce a preferred disassembly format based on the
2214 ordering of the opcode tables.
2215 (load_insn_classes): Show a useful message if IC tables are missing.
2216 (load_depfile): Ditto.
2217 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2218 distinguish preferred disassembly.
2219 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2220 format. Fix incorrect flag on fma.s/fma.s.s0.
2221 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2222 the highest priority.
2223 * ia64-opc-b.c: Use more abbreviations.
2224 * ia64-asmtab.c: Regenerate.
2226 2000-04-21 Jason Eckhardt <jle@redhat.com>
2228 * hppa-dis.c (extract_16): New function.
2229 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2230 new operand types l,y,&,fe,fE,fx.
2232 2000-04-21 Richard Henderson <rth@redhat.com>
2233 David Mosberger <davidm@hpl.hp.com>
2234 Timothy Wall <twall@redhat.com>
2235 Bob Manson <manson@charmed.cygnus.com>
2236 Jim Wilson <wilson@redhat.com>
2238 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2239 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2240 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2242 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2243 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2244 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2245 * Makefile.in: Rebuild.
2246 * configure Rebuild.
2247 * configure.in (bfd_ia64_arch): New target.
2248 * disassemble.c (ARCH_ia64): Define.
2249 (disassembler): Support ARCH_ia64.
2250 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2251 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2252 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2253 ia64-war.tbl, ia64-waw.tbl: New files.
2255 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2257 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2258 (disassemble): Use them.
2260 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2262 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2263 * Makefile.am: Update dependencies.
2264 * Makefile.in: Regenerate.
2266 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2268 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2269 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2270 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2271 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2272 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2273 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2274 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2275 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2276 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2277 ansidecl.h as sysdep.h includes it.
2279 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2281 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2282 --enable-build-warnings option.
2283 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2284 * Makefile.in, configure: Re-generate.
2286 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2288 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2289 stc GBR,@-<REG_N> is available for arch_sh1_up.
2290 Group parallel processing insn with identical mnemonics together.
2291 Make three-operand psha / pshl come first.
2293 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2295 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2296 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2297 (sh_arg_type): Add A_PC.
2298 (sh_table): Update entries using immediates. Add repeat.
2299 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2300 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2302 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2304 * po/opcodes.pot: Regenerate.
2306 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2307 (DEP): Quote when passing vars to sub-make. Add warning message
2309 (DEP1): Rewrite for "gcc -MM".
2310 (CLEANFILES): Add DEP2.
2311 Update dependencies.
2312 * Makefile.in: Regenerate.
2314 2000-04-03 Denis Chertykov <denisc@overta.ru>
2316 * avr-dis.c: Syntax cleanup.
2317 (add0fff): Print the pc relative address as a signed number.
2318 (add03f8): Likewise.
2320 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2322 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2323 the parameter ATTRIBUTE_UNUSED.
2324 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2326 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2328 * m10300-opc.c: SP-based offsets are always unsigned.
2330 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2332 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2333 [branch always] instead of "undefined".
2335 2000-03-27 Nick Clifton <nickc@redhat.com>
2337 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2338 short instructions, from end of list of long instructions.
2340 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2342 * Makefile.am (CFILES): Add avr-dis.c.
2343 (ALL_MACHINES): Add avr-dis.lo.
2345 2000-03-27 Alan Modra <alan@linuxcare.com>
2347 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2349 (print_insn_avr): Call function via pointer in K&R compatible way.
2350 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2351 add0fff, add03f8): Convert to old style function declaration and
2353 (avrdis_opcode): Add prototype.
2355 2000-03-27 Denis Chertykov <denisc@overta.ru>
2357 * avr-dis.c: New file. AVR disassembler.
2358 * configure.in (bfd_avr_arch): New architecture support.
2359 * disassemble.c: Likewise.
2360 * configure: Regenerate.
2362 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2364 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2366 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2368 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2369 flag to determine if operand is pc-relative.
2371 (d30v_format_table):
2372 (REL6S3): Renamed from IMM6S3.
2373 Added flag OPERAND_PCREL.
2374 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2375 added flag OPERAND_PCREL.
2376 (IMM12S3U): Replaced with REL12S3.
2377 (SHORT_D2, LONG_D): Delay target is pc-relative.
2378 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2379 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2380 using the REL* operands.
2381 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2382 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2383 LONG_Db, using REL* operands.
2384 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2385 (d30v_opcode_table): Use new *r formats.
2387 2000-02-28 Nick Clifton <nickc@redhat.com>
2389 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2390 'signed_overflow_ok_p'.
2392 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2394 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2395 name of the libtool directory.
2396 * Makefile.in: Rebuild.
2398 2000-02-24 Nick Clifton <nickc@redhat.com>
2400 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2401 (cgen_clear_signed_overflow_ok): New function.
2402 (cgen_signed_overflow_ok_p): New function.
2404 2000-02-23 Andrew Haley <aph@redhat.com>
2406 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2407 m32r-ibld.c, m32r-opc.h: Rebuild.
2409 2000-02-23 Linas Vepstas <linas@linas.org>
2411 * i370-dis.c, i370-opc.c: New.
2413 * disassemble.c (ARCH_i370): Define.
2414 (disassembler): Handle it.
2416 * Makefile.am: Add support for Linux/IBM 370.
2417 * configure.in: Likewise.
2419 * Makefile.in: Regenerate.
2420 * configure: Likewise.
2422 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2424 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2425 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2428 2000-02-22 Andrew Haley <aph@redhat.com>
2430 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2432 * mips-opc.c (G6): New define.
2433 (mips_builtin_op): Add "move" definition for -gp32.
2435 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2437 From Grant Erickson <gerickso@Brocade.COM>:
2438 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2440 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2442 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2445 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2447 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2448 (print_insn_ppi): Likewise.
2449 (print_insn_shx): Use info->mach to select appropriate insn set.
2450 Add support for sh-dsp. Remove FD_REG_N support.
2451 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2452 (sh_arg_type): Likewise. Remove FD_REG_N.
2453 (sh_dsp_reg_nums): New enum.
2454 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2455 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2456 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2457 (arch_sh3_dsp_up): Likewise.
2458 (sh_opcode_info): New field: arch.
2459 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2460 D_REG_N. Fill in arch field. Add sh-dsp insns.
2462 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2464 * arm-dis.c: Change flavor name from atpcs-special to
2465 special-atpcs to prevent name conflict in gdb.
2466 (get_arm_regname_num_options, set_arm_regname_option,
2467 get_arm_regnames): New functions. API to access the several
2468 flavor of register names. Note: Used by gdb.
2469 (print_insn_thumb): Use the register name entry from the currently
2470 selected flavor for LR and PC.
2472 2000-02-10 Nick Clifton <nickc@redhat.com>
2474 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2476 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2477 "mulsh.h" instructions.
2478 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2480 (print_insn_mcore): Add support for little endian targets.
2481 Add support for MULSH and OPSR classes.
2483 2000-02-07 Nick Clifton <nickc@redhat.com>
2485 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2486 Previous delat did not take.
2488 2000-02-03 Timothy Wall <twall@redhat.com>
2490 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2491 to adjust target address bounds checking and calculate the
2492 appropriate octet offset into data.
2494 2000-01-27 Nick Clifton <nickc@redhat.com>
2496 * arm-dis.c: (parse_disassembler_option): Rename to
2497 parse_arm_disassembler_option and allow to be exported.
2499 * disassemble.c (disassembler_usage): New function: Print out any
2500 target specific disassembler options.
2501 Call arm_disassembler_options() if the ARM architecture is being
2504 * arm-dis.c (NUM_ELEM): Define this macro if not already
2506 (arm_regname): New struct type for ARM register names.
2507 (arm_toggle_regnames): Delete.
2508 (parse_disassembler_option): Use register name structure.
2509 (print_insn): New function: Combines duplicate code found in
2510 print_insn_big_arm and print_insn_little_arm.
2511 (print_insn_big_arm): Call print_insn.
2512 (print_insn_little_arm): Call print_insn.
2513 (print_arm_disassembler_options): Display list of supported,
2514 ARM specific disassembler options.
2516 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2518 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2519 ARM_STT_16BIT flag as Thumb code symbols.
2521 * arm-dis.c (printf_insn_little_arm): Ditto.
2523 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2525 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2526 of raw thumb instructions.
2528 2000-01-20 Nick Clifton <nickc@redhat.com>
2530 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2532 2000-01-03 Nick Clifton <nickc@cygnus.com>
2534 * arm-dis.c (streq): New macro.
2535 (strneq): New macro.
2536 (force_thumb): ew local variable.
2537 (parse_disassembler_option): New function: Parse a single, ARM
2538 specific disassembler command line switch.
2539 (parse_disassembler_option): Call parse_disassembler_option to
2540 parse individual command line switches.
2541 (print_insn_big_arm): Check force_thumb.
2542 (print_insn_little_arm): Check force_thumb.
2544 For older changes see ChangeLog-9899
2550 version-control: never
projects / deliverable / binutils-gdb.git / blob