opcodes/ChangeLog

   1 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
   2
   3         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
   4         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
   5         architecture.
   6         (print_insn_sparc64): Deleted.
   7         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
   8         print_insn_sparc.
   9
  10         * sparc-opc.c (architecture_pname): Add v9a.
  11
  12 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
  13
  14         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
  15         incorrectly defined as 0x16 when it should be 0x15.
  16         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
  17         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
  18         excb (exception barrier) which is defined in the Alpha
  19         Architecture Handbook version 2.
  20         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
  21         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
  22         disassembled as or, for example.
  23
  24 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
  25
  26         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
  27         (_print_insn_mips): Change i from int to unsigned int.
  28
  29 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
  30
  31         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
  32         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
  33
  34 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
  35
  36         * i386-dis.c: Added Pentium Pro instructions.
  37
  38 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  39
  40         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
  41         being for Power2.
  42
  43 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
  44
  45         * sh-opc.h (sh_nibble_type): Added REG_B.
  46         (sh_arg_type): Added A_REG_B.
  47         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
  48         and stc.l opcodes.
  49         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
  50
  51 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
  52
  53         * disassemble.c (disassembler): Use new bfd_big_endian macro.
  54
  55 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
  56
  57         * Makefile.in (distclean): Remove stamp-h.  From Ronald
  58         F. Guilmette <rfg@monkeys.com>.
  59
  60 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
  61
  62         From David Mosberger-Tang  <davidm@azstarnet.com>:
  63         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
  64         instruction.
  65
  66 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
  67
  68         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
  69         (sh_table): Added many SH3 opcodes.
  70         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
  71
  72 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
  73
  74         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
  75         (subco,subco.): Mark this PPC, not PPCCOM.
  76
  77 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
  78
  79         * configure: Rebuild with autoconf 2.7.
  80
  81 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
  82
  83         * configure: Rebuild with autoconf 2.6.
  84
  85 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
  86
  87         * configure.in: Sort list of architectures.  Accept but do nothing
  88         for alliant, convex, pyramid, romp, and tahoe.
  89
  90 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
  91
  92         * a29k-dis.c (print_special): Change num to unsigned int.
  93
  94 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
  95
  96         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
  97         shifting it.
  98
  99 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
 100
 101         * configure.in: Call AC_CHECK_PROG to find and cache AR.
 102         * configure: Rebuilt.
 103
 104 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
 105
 106         * configure.in: Add case for bfd_i860_arch.
 107         * configure: Rebuild.
 108
 109 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 110
 111         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
 112         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
 113         (NEXTDOUBLE): Likewise.
 114         (print_insn_m68k): Don't match fmoveml if there is more than one
 115         register in the list.
 116         (print_insn_arg): Handle a place of '8' for a type of 'L'.
 117
 118 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 119
 120         * m68k-opc.c: Use #W rather than #w.
 121         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
 122
 123 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
 124
 125         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
 126         and likewise for all the dbxx opcodes.
 127
 128 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
 129
 130         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
 131
 132 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
 133
 134         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
 135         the VR4100 specific instructions to the mips_opcodes structure.
 136
 137 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
 138
 139         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
 140         ugly Metrowerks bug in CW6, is fixed in CW7.
 141
 142 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 143
 144         * ppc-opc.c (whole file): Add flags for common/any support.
 145
 146 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
 147
 148         * Makefile.in (BISON): Remove macro.
 149         (FLAGS_TO_PASS): Remove BISON.
 150
 151 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
 152
 153         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 154
 155         * m68k-dis.c (print_insn_m68k): Recognize all two-word
 156         instructions that take no args by looking at the match mask.
 157         (print_insn_arg): Always print "%" before register names.
 158         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
 159         [case '_']: Don't print "@#" before address.
 160         [case 'J']: Use "%s" as format string, not register name.
 161         [case 'B']: Treat place == 'C' like 'l' and 'L'.
 162
 163 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
 164
 165         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
 166         name correctly.
 167
 168 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
 169
 170         From David Mosberger-Tang  <davidm@azstarnet.com>
 171
 172         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
 173         (alpha_insn_set): added definitions for VAX floating point
 174         instructions (Unix compilers don't generate these, but handcoded
 175         assembly might still use them).
 176
 177         * alpha-dis.c (print_insn_alpha): added support for disassembling
 178         the miscellaneous instructions in the Alpha instruction set.
 179
 180 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
 181
 182         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
 183         no longer create sysdep.h, sed ppc-opc.c to work around a
 184         serious Metrowerks C bug.
 185         * mpw-make.in: Remove.
 186         * mpw-make.sed: New file, used by mpw-configure to edit
 187         Makefile.in into an MPW makefile.
 188
 189 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
 190
 191         * Makefile.in (maintainer-clean): New synonym for realclean.
 192
 193 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 194
 195         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
 196         which use '0', '1', and '2' instead.  Specify the proper size for
 197         a pmove immediate operand.  Correct the pmovefd patterns to be
 198         moves to a register, not from a register.
 199         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
 200
 201 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
 202
 203         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
 204         %psr, %wim, %tbr as F_NOTV9.
 205
 206 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
 207
 208         * Makefile.in (Makefile): Just rebuild Makefile when running
 209         config.status.
 210         (config.h, stamp-h): New targets.
 211         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
 212         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
 213         rebuilding config.h.
 214         * configure: Rebuild.
 215
 216         * mips-opc.c: Change unaligned loads and stores with "t,A"
 217         operands to use "t,A(b)".
 218
 219 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 220
 221         * sh-dis.c (print_insn_shx): Add F_FR0 support.
 222
 223 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 224
 225         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
 226         until 3 instead of until 2.
 227
 228 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
 229
 230         * Makefile.in (ALL_CFLAGS): Define.
 231         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
 232         (MOSTLYCLEAN): Add config.log.
 233         (distclean): Don't remove config.log.
 234         * configure.in: Substitute HDEFINES.
 235         * configure: Rebuild.
 236
 237 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 238
 239         * sh-opc.h (sh_arg_type): Add F_FR0.
 240         (sh_table, case fmac): Add F_FR0 as first argument.
 241
 242 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 243
 244         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
 245
 246 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
 247
 248         * sparc-dis.c: Remove all references to NO_V9.
 249
 250 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
 251
 252         * aclocal.m4: Just include ../bfd/aclocal.m4.
 253         * configure: Rebuild.
 254
 255 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
 256
 257         * sparc-dis.c (X_DISP19): Define.
 258         (print_insn, case 'G'): Use it.
 259         (print_insn, case 'L'): Sign extend displacement.
 260
 261 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
 262
 263         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
 264         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
 265         host_makefile_frag or frags.
 266         * aclocal.m4: New file.
 267         * configure: Rebuild.
 268         * Makefile.in (INSTALL): Set to @INSTALL@.
 269         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
 270         (INSTALL_DATA): Set to @INSTALL_DATA@.
 271         (AR): Set to @AR@.
 272         (AR_FLAGS): Set to rc rather than qc.
 273         (CC): Define as @CC@.
 274         (CFLAGS): Set to @CFLAGS@.
 275         (@host_makefile_frag@): Remove.
 276         (config.status): Remove dependency upon @frags@.
 277
 278         * configure.in: ../bfd/config.bfd now just sets shell variables.
 279         Use them rather than looking through target Makefile fragments.
 280         * configure: Rebuild.
 281
 282 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 283
 284         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
 285
 286 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
 287
 288         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
 289         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
 290         sparc64 insns.
 291
 292         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
 293         (lookup_{name,value}): New functions.
 294         (prefetch_table): New static local.
 295         (sparc_{encode,decode}_prefetch): New functions.
 296         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 297
 298 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 299
 300         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 301         instructions.
 302
 303 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 304
 305         * sh-dis.c: Correct comment on first line of file.
 306
 307 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 308
 309         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 310
 311         * sparc-opc.c (asi, membar): New static locals.
 312         (sparc_{encode,decode}_{asi,membar}): New functions.
 313         (sparc_opcodes, membar insn): Fix.
 314         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 315         Support decoding of membar masks.
 316         (X_MEMBAR): Define.
 317
 318 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 319
 320         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 321
 322 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 323
 324         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 325         and likewise for the other branches.  Add bhs as an alias for bcc,
 326         and likewise for the size variants.  Add dbhs as an alias for
 327         dbcc.
 328
 329 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 330
 331         * sh-opc.h (FP sts instructions): Update to match reality.
 332
 333 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 334
 335         * m68k-dis.c: (fpcr_names): Add % before all register names.
 336         (reg_names): Likewise.
 337         (print_insn_arg): Don't explicitly print % before register names.
 338         Add % before register names in static array names.  In case 'r',
 339         print data registers as `@(Dn)', not `Dn@'.  When printing a
 340         memory address, don't print @# before it.
 341         (print_indexed): Change base_disp and outer_disp from int to
 342         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 343         syntax.  Sign extend 8 byte displacement correctly.
 344         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 345         Change parameter disp from int to bfd_vma.
 346
 347         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 348         for jsr.
 349
 350 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 351
 352         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 353         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 354         * sh-opc.h (sh_arg_type): Add new operand types.
 355         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 356
 357 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 358
 359         * Makefile.in (distclean): Remove generated file config.h.
 360
 361 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 362
 363         * Makefile.in (distclean): Remove generated file config.h.
 364
 365 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 366
 367         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 368         Clean up tables.
 369         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 370         (opcode): Remove.
 371         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 372         rather than numopcodes.  Use m68k_opcodes rather than removed
 373         opcode function.  Don't check F_ALIAS.
 374         (print_insn_arg): Change first parameter to be const char *.
 375         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 376         (m68k-opc.o): New target.
 377         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 378         * configure: Rebuild.
 379
 380 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 381
 382         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 383         (opcode_bits, opcode_hash_table): New variables.
 384         (opcodes_initialized): Renamed from opcodes_sorted.
 385         (build_hash_table): New function.
 386         (is_delayed_branch): Use hash table.
 387         (print_insn): Renamed from print_insn_sparc, made static.
 388         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 389         and vice-versa if sparc64.
 390         (print_insn_sparc, print_insn_sparc64): New functions.
 391         (compare_opcodes): Move sparc64 opcodes to end.
 392         Print commutative insns with constant second.
 393         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 394
 395 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 396
 397         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 398         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 399         avoids printing a delay slot in a delay slot.
 400         * sh-opc.h (sh_table): Fully bracket last entry.
 401
 402 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 403
 404         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 405
 406 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 407
 408         * configure.in: Get host_makefile_frag from ${srcdir}.
 409
 410         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 411         config.h from config.in.  Don't set up sysdep.h link.
 412         * sysdep.h: New file.
 413         * configure, config.in: New files, generated from configure.in.
 414         * Makefile.in: Updated to be processed autoconf-style.
 415         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 416         (Makefile): Depend on config.status.
 417         (config.status): New rule.
 418         * configure.bat: Update Makefile substitutions.
 419
 420 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 421
 422         * mips-opc.c (L1): Define.
 423         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 424         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 425         and wb.
 426
 427 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 428
 429         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 430         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 431         have multiple add units but only a single logical unit.
 432
 433         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 434         shifted by 18, without any insertion or extraction function.
 435         (insert_cr, extract_cr): Remove.
 436
 437 start-sanitize-arc
 438 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 439
 440         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 441
 442 end-sanitize-arc
 443 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 444
 445         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 446         register names.
 447
 448 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 449
 450         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 451         * sh-opc.h: Add copyright.
 452
 453 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 454
 455         * Makefile.in (crunch-m68k): Delete extra target accidentally
 456         checked in a while ago.
 457
 458 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 459
 460         * sh-opc.h (sh_table): Add SH3 support.
 461
 462 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 463
 464         * sh-opc.h: Added bsrf and braf.
 465
 466 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 467
 468         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 469         bogus [ls]fm{ea,fd} patterns.
 470
 471         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 472         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 473         initialize it from memory.  Make function static.
 474         (print_insn_{big,little}_arm): New functions.
 475         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 476         the correct endianness.
 477
 478 start-sanitize-arc
 479 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 480
 481         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 482         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 483 end-sanitize-arc
 484
 485 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 486
 487         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 488         enum list.
 489
 490 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 491
 492         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 493         17th, so that it builds again using GCC as the compiler.
 494
 495 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 496
 497         * mips-dis.c (print_insn_little_mips): Cast return value from
 498         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 499         expects an unsigned long, and that might be fewer words of
 500         argument storage (e.g., if bfd_vma is long long on a 32-bit
 501         machine).
 502         (print_insn_big_mips): Likewise with bfd_getb32 value.
 503         (_print_insn_mips): Now static.
 504
 505 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 506
 507         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 508         gcc memory hog problem with initializer is fixed.
 509
 510 start-sanitize-arc
 511 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 512
 513         * arc-opc.c (NULL): Define.
 514         (arc_operands, insn fields u,s): Delete.
 515         (arc_operands, insn fields a,b,c): Mark as signed.
 516         (arc_opcodes): No longer const, links computed at run-time.
 517         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 518         suffixes that affect the insn code.
 519         (arc_opcodes): Resort table to macros are first.
 520         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 521         (arc_opcodes, st [b] entry): Likewise.
 522         (arc_opcodes, st [b,d] entry): Fix mask, value.
 523         (arc_reg_names): Add entries for r29, r30, r31, r60.
 524         (opcode_map, icode_map): New static globals.
 525         (arc_opcode_init_tables): Initialize them.
 526         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 527         (insert_shimmoffset): Signal error if register present.
 528         Validate constant.
 529         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 530 end-sanitize-arc
 531
 532 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 533
 534         Merge in support for Mac MPW as a host.
 535         (Old change descriptions retained for informational value.)
 536
 537         * mpw-config.in (archname): Compute from the config.
 538         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 539
 540         * mpw-config.in (target_arch): Compute from canonical target.
 541         (m68k, mips, powerpc, sparc): Add architectures.
 542         * mpw-make.in (disassemble.c.o): Add.
 543         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 544
 545         * mpw-config.in (BFD_MACHINES): Set to a default value.
 546         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 547
 548         * mpw-make.in (CSEARCH): Add extra-include to search path.
 549
 550         * mpw-config.in (varargs.h): Don't create.
 551         (sysdep.h): Create using forward-include.
 552         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 553
 554         * mpw-config.in: New file, MPW version of configure.in.
 555         * mpw-make.in: New file, MPW version of Makefile.in.
 556
 557 start-sanitize-arc
 558 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 559
 560         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 561         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 562         (print_insn_*): Pass bfd mach number, not opcode version.
 563         * arc-opc.c (arc_get_opcode_mach): New function.
 564 end-sanitize-arc
 565
 566 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 567
 568         * alpha-dis.c (print_insn_alpha): Put empty statement after
 569         default label.
 570
 571 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 572
 573         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 574         (low_sign_extend): Likewise.
 575         (get_field): Delete unused function.
 576         (set_field, deposit_14, deposit_21): Likewise.
 577
 578 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 579
 580         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 581           (guy@netapp.com).
 582
 583 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 584
 585         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 586
 587         * alpha-opc.h (OSF_ASMCODE): define
 588         print pal-code names as defined in App C of the
 589         Alpha Architecture Reference Manual
 590
 591         * alpha-dis.c: cleaned up output
 592         print stylized code forms as defined in App A.4.3 of the
 593         Alpha Architecture Reference Manual
 594
 595 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 596
 597         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 598         `rfe'.
 599         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 600         'N', and 'M'.
 601
 602 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 603
 604         * m68k-dis.c (opcode): New function.  Returns address of opcode
 605         table entry given index, even if the opcode table was split to
 606         work around gcc bugs.
 607         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 608         directly.
 609         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 610         (reg_names): Now const.
 611         (print_insn_arg): Arrays cacheFieldName and names now const.
 612         (print_indexed): Array scales now const.
 613
 614 start-sanitize-arc
 615 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 616
 617         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 618         (print_insn_arc_{host,graphics,audio}): Likewise.
 619         (print_insn): Add prototype.
 620         (arc_get_disassembler): New arg `big_p'.  Return little or big
 621         print fn accordingly.
 622         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 623         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 624         (arc_opval_supported): Likewise.
 625         * disassemble.c (disassembler): Pass big endian flag to
 626         arc_get_disassembler.
 627 end-sanitize-arc
 628
 629 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 630
 631         * ppc-opc.c: Sort recently added instructions by minor opcode
 632         number within major opcode number.
 633
 634 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 635
 636         * hppa-dis.c: Include libhppa.h.
 637
 638 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 639
 640         * mips-opc.c: Change dli to use M_DLI, and add dla.
 641
 642 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 643
 644         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 645
 646 start-sanitize-arc
 647 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 648
 649         * arc-dis.c (arc_get_disassembler): Change argument to int,
 650         one of bfd_mach_arc_xxx.  All callers updated.
 651 end-sanitize-arc
 652
 653 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 654
 655         * mips-opc.c: Add r4650 mul instruction.
 656
 657 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 658
 659         * mips-opc.c: Add uld and usd macros for unaligned double load and
 660         store.
 661
 662 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 663
 664         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 665         mfdcr, mtdcr, icbt, iccci.
 666
 667 start-sanitize-arc
 668 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 669
 670         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 671         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 672         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 673         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 674         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 675         (insert_absaddr): New function.
 676
 677 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 678
 679         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 680         New argument `cpu', pass it to arc_opcode_init_tables.
 681         Document byte order dependencies.  Ignore unsupported insns.
 682         (arc_get_disassembler): New function.
 683         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 684         print_insn_arc_audio): New functions.
 685         * arc-opc.c (MULTSHIFT operand): Delete.
 686         (UNSIGNED, SATURATION): New operands.
 687         (mac, mul, mul64, mulu64): New insns.
 688         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 689         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 690         (host,graphics,audio extended and auxiliary regs): Define.
 691         (ss, sc, mh, ml): New suffixes.
 692         (arc_opcode_supported, arc_opval_supported): New functions.
 693         (insert_multshift, extract_multshift): Deleted.
 694         * disassemble.c (disassembler, case bfd_arch_arc): Call
 695         arc_get_disassembler to get disassembler routine.
 696 end-sanitize-arc
 697
 698 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 699
 700         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 701         signed char fields to shorts, more portable.
 702
 703 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 704
 705         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 706         char fields as signed chars, since they may have negative values.
 707
 708 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 709
 710         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 711           (mycroft@netbsd.org).
 712
 713 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 714
 715         From "Logg, Ed" <elogg@ea.com>:
 716         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 717         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 718         value.
 719
 720 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 721
 722         * ppc-opc.c: Changes based on patch from David Edelsohn
 723         <edelsohn@mhpcc.edu>.
 724         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 725         SPR.
 726         (FXM_MASK): Define.
 727         (insert_tbr): New static function.
 728         (extract_tbr): New static function.
 729         (XFXFXM_MASK, XFXM): Define.
 730         (XSPRBAT_MASK, XSPRG_MASK): Define.
 731         (powerpc_opcodes): Add instructions to access special registers by
 732         name.  Add mtcr and mftbu.
 733
 734 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 735
 736         * mips-opc.c (P3): Define.
 737         (mips_opcodes): Add mad and madu.
 738
 739 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 740
 741         * configure.in: Add W65 support.
 742         * disassemble.c: Likewise.
 743         * w65-opc.h, w65-dis.c: New files.
 744
 745 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 746
 747         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 748         immediates.
 749
 750 start-sanitize-arc
 751 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 752
 753         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 754         slot.
 755         * arc-opc.c (extract_reladdr): New function.
 756         (insert_reladdr): Store address right-shifted by 2.
 757 end-sanitize-arc
 758
 759 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 760
 761         * mips-opc.c: Add dli as a synonym for li.
 762
 763 start-sanitize-arc
 764 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 765
 766         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 767         All uses changed.
 768         (extraction fns): Insn argument now array of two words.  Return pointer
 769         to value's table entry.  All uses changed.
 770         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 771         (insert_multshift, extract_multshift): New fns.
 772         (arc_operands): Add support for cache bypass suffix.  Add support for
 773         predefined aux regs.  Modifier bits moved to flags field.
 774         (arc_opcodes): Likewise.
 775         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 776         New insn rlc.  Update to syntax in programmer's manual.
 777         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 778         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 779         bypass.
 780         (arc_opcode_init_tables): New argument to indicate cpu type.
 781         (insert_reg): Handle predefined aux regs.
 782         (extract_reg): Likewise.
 783         (lookup_register): New fn.
 784         * arc-dis.c (arc_condition_codes): Deleted.
 785         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 786         Clean up modifier handling.  Handle predefined aux regs.
 787 end-sanitize-arc
 788
 789 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 790
 791         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 792         print something for reserved opcode values, even if it won't
 793         assemble again.
 794
 795         * mips-dis.c (_print_insn_mips): When initializing, shift right
 796         and mask, to avoid sign extension problems on the Alpha.
 797
 798         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 799         control registers.
 800
 801 start-sanitize-arc
 802 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 803
 804         * configure.in: Add ARC support.
 805         * disassemble.c: Likewise.
 806         * arc-dis.c, arc-opc.c: New files.
 807 end-sanitize-arc
 808
 809 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 810
 811         * sh-opc.h (mov.l gbr): Get direction right.
 812         * sh-dis.c (print_insn_shx): New function.
 813         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 814         print opcodes with right byte order.
 815
 816 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 817
 818         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 819         to avoid conflicts with getopt.
 820
 821 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 822
 823         * hppa-dis.c (print_insn_hppa): Read the instruction using
 824         bfd_getb32, so that it works on a little endian or 64 bit host.
 825         Remove unused local variable op.
 826
 827 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 828
 829         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 830         addu does not work correctly if -mips3.
 831
 832 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 833
 834         * a29k-dis.c (print_special): Add special register names defined
 835         on 29030, 29040 and 29050.
 836         (print_insn): Handle new operand type 'I'.
 837
 838 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 839
 840         * Makefile.in (INSTALL): Use top level install.sh script.
 841
 842 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 843
 844         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 845         that it works on a little endian host.
 846
 847 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 848
 849         * configure.in: Use ${config_shell} when running config.bfd.
 850
 851 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 852
 853         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 854
 855 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 856
 857         * a29k-dis.c (print_insn): Print the opcode.
 858
 859 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 860
 861         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 862
 863 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 864
 865         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 866
 867 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 868
 869         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 870         which store a value into memory.
 871
 872 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 873
 874         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 875         * arm-dis.c, arm-opc.h: New files.
 876
 877 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 878
 879         * Makefile.in (ns32k-dis.o): Add dependency.
 880         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 881         string, not as array of chars.
 882
 883 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 884
 885         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 886
 887         * sparc-opc.c: Added sparclite extended FP operations, and
 888         versions of v9 impdep* instructions permitting specification of
 889         the OPF field.
 890
 891 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 892
 893         * i960-dis.c (reg_names): Now const.
 894         (struct sparse_tabent): New type, copied from array type in mem
 895         function.
 896         (ctrl): Local static array ctrl_tab now const.
 897         (cobr): Local static array cobr_tab now const.
 898         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 899         static variable mem_tab no longer explicitly initialized.  Changed
 900         mem_init to const array of struct sparse_tabent.
 901         (reg): Local static variable reg_tab no longer explicitly
 902         initialized.  Changed reg_init to const array of struct
 903         sparse_tabent.
 904         (ea): Local static array scale_tab now const.
 905
 906         start-sanitize-i960xl
 907         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 908         (REG_MAX): Updated.
 909         end-sanitize-i960xl
 910
 911 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 912
 913         * configure.bat: the disassember needs to be enabled for
 914         "objdump -d" to work in djgpp.
 915
 916 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 917
 918         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 919         (invalid_float): Enabled general version, doesn't require running
 920         on ns32k host.  Changed to take char* argument, and test for
 921         explicitly specified sizes, instead of using sizeof() on host CPU
 922         types.
 923         (INVALID_FLOAT): Cast first argument.
 924         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 925         list_P032, list_M032): Now const.
 926         (optlist, list_search): Made appropriate arguments now point to
 927         const.
 928         (print_insn_arg): Changed static array of one-character-string
 929         pointers into a static const array of characters; fixed sprintf
 930         statement accordingly.
 931
 932 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 933
 934         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 935         from distribution. A ns32k-dis.c from a previous distribution has
 936         been brought up to date and supports the new interface.
 937
 938         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 939
 940         * configure.in: add bfd_ns32k_arch target support.
 941
 942         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 943         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 944
 945 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 946
 947         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 948         disassembly right.
 949
 950 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 951
 952         * h8300-dis.c, mips-dis.c: Don't use true and false.
 953
 954 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 955
 956         * configure.in: Change --with-targets to --enable-targets.
 957
 958 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 959
 960         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 961         opcodes to the first instruction with that opcode, to speed
 962         disassembly of large files.  From ralphc@pyramid.com (Ralph
 963         Campbell).
 964
 965 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 966
 967         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 968
 969 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 970
 971         * configure.bat: update to latest makefile.in
 972
 973 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 974
 975         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 976         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 977         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 978         slot insn is in a delay slot.
 979         * z8k-opc.h: (resflg): Fix patterns.
 980         * h8500-opc.h Fix CR insn patterns.
 981
 982 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 983
 984         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 985         "cmpl" before POWER versions, so that gas -many uses them.
 986
 987 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 988
 989         * disassemble.c: New file.
 990         * Makefile.in (OFILES): Add disassemble.o.
 991         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 992         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 993         binutils/configure.in.
 994
 995         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 996         opcode being examined.
 997
 998 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 999
1000         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1001         (insert_ral, insert_ram, insert_ras): New functions.
1002         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1003         RAS for store with update.
1004
1005 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1006
1007         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
1008         (edelsohn@npac.syr.edu).
1009
1010 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1011
1012         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1013         immediate argument.
1014
1015 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
1016
1017         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1018
1019 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1020
1021         * ppc-opc.c (powerpc_operands): The signedp field has been
1022         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
1023         instead.  Add new operand SISIGNOPT.
1024         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1025         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1026         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1027         than signedp field.
1028
1029 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1030
1031         * i386-dis.c (struct private):  Renamed to dis_private. `private'
1032         is a reserved word for dynix cc.
1033
1034 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1035
1036         * configure.in: Change error message to refer to bfd/config.bfd
1037         rather than bfd/configure.in.
1038
1039 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
1040
1041         * ppc-opc.c: Define POWER2 as short alias flag.
1042         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1043         fsqrt.
1044
1045 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1046
1047         * i960-dis.c (print_insn_i960): Don't read a second word for
1048         opcodes 0, 1, 2 and 3.
1049
1050 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1051
1052         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1053
1054 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1055
1056         * m68881-ext.c: Removed; no longer used.
1057         * Makefile.in: Changed accordingly.
1058
1059         * m68k-dis.c (ext_format_68881): Don't declare.
1060         (print_insn_m68k): If an instruction uses place 'i', it uses at
1061         least four fixed bytes.
1062         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
1063         extended float, convert to double using floatformat_to_double, not
1064         ieee_extended_to_double, and fetch the data before converting it.
1065
1066 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1067
1068         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
1069         davidj@ICSI.Berkeley.EDU (David Johnson).
1070
1071 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1072
1073         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1074         PowerPC uses bdnz[l][a].
1075
1076 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1077
1078         * dis-buf.c, i386-dis.c:  Include sysdep.h.
1079
1080 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1081
1082         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1083
1084         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1085         by Motorola PowerPC 601 with PPC_OPCODE_601.
1086         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1087         Disassemble Motorola PowerPC 601 instructions as well as normal
1088         PowerPC instructions.
1089
1090 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1091
1092         * i960-dis.c (reg, mem): Just use a static array instead of
1093         calling xmalloc.
1094
1095 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1096
1097         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1098         condition name index if this is for a negated condition.
1099
1100         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1101         Floating point format for 'H' operand is backwards from normal
1102         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
1103         operands (fmpyadd and fmpysub), handle bizarre register
1104         translation correctly for single precision format.
1105
1106         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1107         or 'I' operands if the next format specifier is 'M' (fcmp
1108         condition completer).
1109
1110 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1111
1112         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1113         single number giving a bitmask for the MB and ME fields of an M
1114         form instruction.  Change NB to accept 32, and turn it into 0;
1115         also turn 0 into 32 when disassembling.  Seperated SH from NB.
1116         (insert_mbe, extract_mbe): New functions.
1117         (insert_nb, extract_nb): New functions.
1118         (SC_MASK): Mask out SA and LK bits.
1119         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1120         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
1121         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
1122         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1123         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1124         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
1125         (powerpc_macros): Define table of macro definitions.
1126         (powerpc_num_macros): Define.
1127
1128         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1129         if PPC_OPERAND_NEXT is set.
1130
1131 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1132
1133         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1134         char.  Retrieve contents using bfd_getl32 instead of shifting.
1135
1136 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1137
1138         * ppc-opc.c: New file.  Opcode table for PowerPC, including
1139         opcodes for POWER (RS/6000).
1140         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
1141         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1142         (CFILES): Add ppc-dis.c.
1143         (ppc-dis.o, ppc-opc.o): New targets.
1144         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1145
1146 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
1147
1148         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1149         No space before 'u', 'f', or 'N'.
1150
1151 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
1152
1153         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1154         farther than we should.
1155
1156         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1157
1158 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1159
1160         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1161
1162 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
1163
1164         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1165         needs it, to prevent reading past the end of a section.
1166
1167 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1168
1169         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1170         Removed t,A case for la; always use t,A(b) case.
1171
1172 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1173
1174         From Ted Lemen <mellon@pepper.ncd.com>
1175         * mips-dis.c (print_insn_arg): Handle 'k'.
1176         * mips-opc.c: Make cache use k, not t.
1177
1178 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1179
1180         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
1181         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1182         FLOAT_FORMAT_CODE to put out floating point register names.
1183
1184 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1185
1186         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1187
1188 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1189
1190         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1191
1192 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1193
1194         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1195         larger than 32.  Moved dsxx32 variants first for disassembler.
1196
1197 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1198
1199         * z8kgen.c, z8k-opc.h: Add full lda information.
1200
1201 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1202
1203         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1204         movb instructions.  Any necessary space will be emitted by
1205         the code to handle nullification completers.
1206
1207 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1208
1209         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1210
1211 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1212
1213         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1214         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1215
1216 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1217
1218         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1219
1220 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1221
1222         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1223         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1224
1225 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1226
1227         * m88k-dis.c (m88kdis): comment change.  Remove space after
1228           printing mnemonic.
1229           (printop): handle new arg types DEC and XREG for m88110.
1230
1231 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1232
1233         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1234         type for absolute branch addresses.  Delete special
1235         "ble" and "be" code in 'W' operand code.
1236
1237 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1238
1239         * mips-opc.c: Set hazard information correctly for branch
1240         likely instructions.
1241
1242 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1243
1244         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1245         info->fprintf_func for printing and info->print_address_func for
1246         address output.
1247
1248 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1249
1250         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1251
1252 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1253
1254         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1255         Corrected second case of "b" for disassembler.
1256
1257 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1258
1259         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1260         to BFD swapping routines to correspond to BFD name changes.
1261
1262 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1263
1264         * mips-opc.c: Change div machine instruction to be z,s,t rather
1265         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1266         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1267         rem and remu which generates only the corresponding div
1268         instruction.  This is for compatibility with the MIPS assembler,
1269         which only generates the simple machine instruction when an
1270         explicit destination of $0 is used.
1271         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1272
1273 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1274
1275         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1276         WR_31 hazard for bal, bgezal, bltzal.
1277
1278 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1279
1280         * hppa-dis.c (print_insn_hppa): Use print function
1281         from within the disassemble_info, not fprintf_filtered.
1282
1283 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1284
1285         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1286         Law, law@cs.utah.edu.)
1287
1288 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1289
1290         * mips-opc.c ("absu"): Removed.
1291         ("dabs"): Added.
1292
1293 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1294
1295         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1296         Changed hazard information to distinguish between memory load
1297         delays and coprocessor load delays.
1298
1299 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1300
1301         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1302
1303 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1304
1305         * configure.in: Don't pass cpu to config.bfd.
1306
1307 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1308
1309         * m88k-dis.c (m88kdis): Make class unsigned.
1310
1311 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1312
1313         * alpha-dis.c (print_insn_alpha): One branch format case was
1314         missing the instruction name.
1315
1316 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1317
1318         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1319         Add the arch-specific auxiliary files.
1320         (OFILES): Remove the arch-specific auxiliary files
1321         and use BFD_MACHINES instead of DIS_LIBS.
1322         * configure.in: Set BFD_MACHINES based on --with-targets option.
1323
1324 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1325
1326         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1327         for swc1.
1328
1329 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1330
1331         * sparc-opc.c: Change CONST to const to deal with gcc
1332         -Dconst=__const -traditional.
1333
1334 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1335
1336         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1337         coprocessor instructions out of #if 0, and made them use new
1338         argument type "C".
1339
1340 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1341
1342         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1343
1344 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1345
1346         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1347         instruction, for use by the disassembler.
1348
1349         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1350         hand-coded sign extensions that depended on 32-bit host ints.
1351         FIXME, we still depend on big-endian host bitfield ordering.
1352         (sparc_print_insn):  Set the insn_info_valid field, and the
1353         other fields that describe the instruction being printed.
1354
1355 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1356
1357         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1358         `jmp' instead of just one of them.
1359
1360 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1361
1362         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1363         (fput_fp_reg_r): Renamed from fput_reg_r.
1364         (fput_fp_reg): New function.
1365         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1366
1367         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1368
1369         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1370
1371 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1372
1373         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1374
1375         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1376         don't output a space.
1377
1378         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1379
1380 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1381
1382         * mips-opc.c: New file, containing opcode table from
1383         ../include/opcode/mips.h.
1384         * Makefile.in: Add it.
1385
1386 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1387
1388         * m88k-dis.c: New file, moved in from gdb and changed to use the
1389         new dis-asm.h disassembler interface.
1390         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1391         (m88k-dis.o): New target.
1392
1393 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1394
1395         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1396         argument string const char * to correspond to opcode/mips.h.
1397
1398 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1399
1400         * mips-dis.c: Updated to account for name changes in new version
1401         of opcode/mips.h.
1402         * Makefile.in: Added header file dependencies.
1403
1404 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1405
1406         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1407
1408 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1409
1410         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1411         extend, rather than shifts.
1412
1413 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1414
1415         * Makefile.in: Undo 15 June change.
1416
1417 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1418
1419         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1420         or error code.
1421         * m68k-dis.c:  Re-write to detect invalid operands before
1422         printing anything, so we can handle this the same way we
1423         handle invalid opcodes.
1424
1425 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1426
1427         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1428
1429 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1430
1431         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1432         header files.
1433
1434 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1435
1436         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1437
1438         * configure.in: Do make sysdep.h link.
1439         * Makefile.in: Search ../include.  Don't search ../bfd.
1440
1441 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1442
1443         Changes from Jeff Law, law@cs.utah.edu:
1444         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1445         Do not print a space before the completers specified by
1446         'a' and 'd'.
1447
1448 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1449
1450         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1451         defined, since gdb has been fixed.
1452
1453         Changes from Jeff Law, law@cs.utah.edu:
1454         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1455         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1456         be a *disassemble_info, not a *FILE.
1457         * hppa-dis.c: Support 'd', '!', and 'a'.
1458         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1459         * hppa-dis.c: Delete cases which are no longer needed.
1460
1461 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1462
1463         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1464
1465 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1466
1467         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1468         H8/300-H opcodes.
1469
1470 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1471
1472         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1473         * configure.in:  No longer need to configure to get sysdep.h.
1474
1475 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1476
1477         * Patches from Jeffrey Law <law@cs.utah.edu>.
1478         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1479         templates for 1.1 FP computational instructions.
1480
1481 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1482
1483         * h8500-dis.c (print_insn_h8500): Address argument is type
1484         bfd_vma.
1485         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1486         Ditto.
1487
1488         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1489         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1490
1491         * sparc-dis.c (compare_opcodes): Move static declaration to
1492         top-level.
1493
1494 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1495
1496         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1497         instruction, remove unimp hack from 'l' argument.
1498
1499 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1500
1501         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1502         happy.
1503
1504 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1505
1506         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1507         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1508         instructions.
1509
1510 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1511
1512         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1513         arrays of string pointers to 2-d arrays of chars, to save
1514         space.
1515
1516 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1517
1518         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1519         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1520
1521 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1522
1523         * hppa-dis.c: New file from Utah, adapted to new disassembler
1524         calling interface.
1525         * Makefile.in: Include it.
1526
1527 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1528
1529         * sh-dis.c, sh-opc.h: New files.
1530
1531 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1532
1533         * alpha-dis.c, alpha-opc.h: New files.
1534
1535 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1536
1537         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1538         value.
1539
1540 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1541
1542         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1543
1544 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1545
1546         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1547         const.
1548
1549 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1550
1551         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1552         and double percent signs a few places.
1553
1554         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1555
1556         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1557         Use info->print_address_func not print_address.
1558
1559         * dis-buf.c (generic_print_address): New function.
1560
1561 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1562
1563         * Makefile.in: Add sparc-dis.c.
1564         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1565         From GDB:
1566             Add `add' instruction to the set that get checked
1567             for a preceding `sethi' in order to print an absolute address.
1568             * (print_insn):  Disassembly prefers real instructions.
1569             (is_delayed_branch):  Speed up.
1570             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1571             Still missing some float ops, and needs testing.
1572             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1573             F_ALIAS.  Use printf, not fprintf, when not passing a file
1574             pointer...
1575             (compare_opcodes): Check that identical instructions have
1576             identical opcodes, complain otherwise.
1577         From binutils:
1578             * New 'm' arg.
1579             * Include reg_names.
1580         From neither:
1581             Use dis-asm.h/read_memory_func interface.
1582
1583 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1584
1585         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1586           deliberately return non-zero to setjmp from longjmp.  Otherwise
1587           this code fails to compile.
1588
1589 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1590
1591         * m68k-dis.c:  Fix prototype for fetch_arg().
1592
1593 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1594
1595         * dis-buf.c: New file, for new read_memory_func interface.
1596         Makefile.in (OFILES): Include it.
1597         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1598         Use new read_memory_func interface.
1599
1600 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1601
1602         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1603         * h8500-opc.h: Fix couple of opcodes.
1604
1605 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1606
1607         * Makefile.in: add dvi & installcheck targets
1608
1609 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1610
1611         * Makefile.in:  Update for h8500-dis.c.
1612
1613 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1614
1615         * h8500-dis.c, h8500-opc.h: New files
1616
1617 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1618
1619         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1620         ../include/dis-asm.h.
1621         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1622         and ../gdb/m68k-pinsn.c).
1623         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1624         and ../gdb/i386-pinsn.c).
1625         * m68881-ext.c:  New file.  Moved definition of
1626         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1627         * Makefile.in:  Adjust for new files.
1628         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1629         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1630         can be dis-assembled.
1631
1632 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1633
1634         * mips-dis.c (print_insn_arg): Now returns void.
1635
1636 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1637
1638         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1639         files that use the macros.
1640
1641 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1642
1643         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1644         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1645         (CFILES): Added mips-dis.c.
1646
1647 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1648
1649         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1650         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1651
1652 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1653
1654         * Makefile.in:  Improve *clean rules.
1655         * configure.in:  Allow a default host.
1656
1657 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1658
1659         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1660         files include other sysdep files
1661
1662 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1663
1664         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1665
1666 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1667
1668         * configure.in:  For host support, use ../bfd/configure.host
1669         so it stays in sync with the ../bfd/hosts database.
1670
1671 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1672
1673         * configure.in: use cpu-vendor-os triple instead of nested cases
1674
1675 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1676
1677         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1678         *always* the wrong one.
1679
1680 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1681
1682         * z8kgen.c: added copyright info
1683
1684 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1685
1686         * z8k-dis.c (unparse_instr): prettier tabs
1687         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1688
1689 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1690
1691         * configure.in:  Add ncr* configuration.
1692         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1693         picayune ANSI compilers happy.
1694
1695 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1696
1697         * configure.in (i386):  Make i386 and i486 synonymous for now.
1698         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1699
1700 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1701
1702         * Makefile.in (install): Fix typo.
1703
1704 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1705
1706         * Makefile.in (make):  Remove obsolete crud.
1707         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1708
1709 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1710
1711         * Makefile.in: since there are no SUBDIRS, remove rule and
1712         references of subdir_do.
1713
1714 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1715
1716         * Makefile.in (install): Get the library name right here too.
1717         Don't install bfd.h, since it's unrelated to this library.  No
1718         subdirs to recurse into, either.
1719         (CFILES): The source file has a .c suffix, not .o.
1720
1721         * sparc-opc.c: New file, moved from BFD.
1722         * Makefile.in (OFILES): Build it.
1723
1724 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1725
1726         * z8k-dis.c: fixed forward refferences of some declarations.
1727
1728 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1729
1730         * Makefile.in: get the name of the library right
1731
1732 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1733
1734         * z8k-dis.c: knows how to disassemble z8k stuff
1735         * z8k-opc.h: new file full of z8000 opcodes
1736
1737 \f
1738 Local Variables:
1739 version-control: never
1740 End: