1 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
3 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
5 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
8 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
9 * aclocal.m4: Rebuild with new libtool.
13 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
15 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
18 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
20 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
22 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
24 * v850-opc.c (v850_opcodes): Further rearrangements.
27 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
29 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
32 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
34 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
37 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
39 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
41 * mips16-opc.c: Added mips16 sdbbp.
44 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
46 * v850-opc.c: Initialise processors field of v850_opcode structure.
49 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
51 Merge changes from Martin Hunt:
53 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
55 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
56 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
57 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
59 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
61 * d30v-dis.c (print_insn): First operand of d*i (delayed
62 branch) instructions is relative.
64 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
65 (d30v_operand_table): Add IMM6S3 type.
66 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
68 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
71 * d30v-opc.c: Correct entries for repeat*, and sat*.
72 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
73 types. Correct several formats.
75 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
77 * d30v-opc.c (pre_defined_registers): Change control registers.
79 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
80 SHORT_C2. Manual was incorrect.
82 * d30v-dis.c (lookup_opcode): Return value now indicates
83 if an opcode has a short and a long form. Used for deciding
84 to append a ".s" or ".l".
85 (print_insn): Append a ".s" to an instruction if it is
86 the short form and ".l" if it is a long form. Do not append
87 anything if the instruction has only one possible size.
89 * d30v-opc.c: Change mulx2h to require an even register.
90 New form: SHORT_A2; a SHORT_A form that needs an even
91 register as the first operand.
93 * d30v-dis.c (print_insn_d30v): Fix problem where the last
94 instruction was not being disassembled if there were an odd
95 number of instructions.
97 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
101 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
103 * v850-dis.c (disassemble): Improved display of register lists.
106 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
108 * sparc-opc.c (sparc_opcodes): Fix assembler args to
109 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
110 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
111 fandnot1s, fandnot2s.
113 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
115 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
117 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
119 * cgen-asm.c (cgen_parse_address): New argument resultp.
121 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
123 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
125 * mn10200-dis.c (disassemble): PC relative instructions are
126 relative to the next instruction, not the current instruction.
128 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
130 * v850-dis.c (disassemble): Only signed extend values that are not
131 returned by extract functions.
132 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
134 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
136 * v850-opc.c: Update comments. Remove use of
137 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
139 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
141 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
143 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
145 * configure: Rebuilt with latest devo autoconf for NT support.
147 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
149 * v850-dis.c (disassemble): Use curly brace syntax for register
152 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
153 where r0 is being used as a destination register.
156 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
158 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
162 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
164 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
165 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
166 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
167 Add insns to access SGR and DBR.
168 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
171 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
173 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
176 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
178 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
179 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
182 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
184 * configure (cgen_files): Add support for v850e target.
185 * configure.in (cgen_files): Add support for v850e target.
187 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
189 * configure (cgen_files): Add support for v850eq target.
190 * configure.in (cgen_files): Add support for v850eq target.
193 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
195 * configure.in (bfd_arc_arch): Add.
196 * configure: Rebuild.
197 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
198 * Makefile.in: Rebuild.
199 * arc-dis.c, arc-opc.c: New files.
200 * disassemble.c (ARCH_all): Define ARCH_arc.
201 (disassembler): Add ARC support.
203 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
206 * v850-dis.c (disassemble): Add support for v850EQ instructions.
208 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
209 (v850_opcodes): Add v850EQ instructions.
211 * v850-dis.c (disassemble): Add support for v850E instructions.
213 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
214 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
215 insert_spe, extract_spe): New Functions.
216 (v850_opcodes): Add v850E instructions.
219 * v850-opc.c: Reorganised and re-layed out to improve readability
222 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
224 * configure: Rebuild with autoconf 2.12.1.
226 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
228 * aclocal.m4, configure: Rebuild with new automake patches.
230 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
232 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
233 * acinclude.m4: Just include acinclude.m4 from BFD.
234 * aclocal.m4, configure: Rebuild.
236 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
238 * Makefile.am: New file, based on old Makefile.in.
239 * acconfig.h: New file.
240 * acinclude.m4: New file.
241 * stamp-h.in: New file.
242 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
243 Removed shared library handling; now handled by libtool. Replace
244 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
245 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
246 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
247 handling in AC_OUTPUT.
248 * dep-in.sed: Change .o to .lo.
249 * Makefile.in: Now built with automake.
250 * aclocal.m4: Now built with aclocal.
251 * config.in, configure: Rebuild.
253 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
255 * mips-opc.c: Fix typo/thinko in "eret" instruction.
258 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
260 * mips-opc.c: Fix coding of mtsa.
263 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
265 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
267 * sparc-dis.c (sorted_opcodes): New static local.
268 (struct opcode_hash): `opcode' is pointer to const element.
269 (build_hash): First arg is now table of sorted pointers.
270 (print_insn_sparc): Sort opcodes by sorting table of pointers.
271 (compare_opcodes): Update.
273 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
275 * cgen-opc.c: #include <ctype.h>.
276 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
277 Handle case insensitive hashing.
278 (hash_keyword_value): Change type of `value' to unsigned int.
280 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
282 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
283 precision FP, mark it as such. Likewise for double precision
284 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
287 (mips_builtin_opcodes): Remove non-existant r5900 instructions
291 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
293 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
294 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
297 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
299 * ppc-opc.c (extract_nsi): make unsigned expression signed before
301 (UNUSED): remove one level of parens, so MSVC doesn't choke on
302 nesting depth when all the macros are expanded.
304 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
306 * sparc-opc.c: The fcmp v9a instructions take an integer register
307 as a destination, not a floating point register. From Christian
308 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
310 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
312 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
313 syntax. From Roman Hodek
314 <rnhodek@faui22c.informatik.uni-erlangen.de>.
316 * i386-dis.c (twobyte_has_modrm): Fix pand.
318 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
320 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
322 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
324 * arm-dis.c: Add prototypes for arm_decode_shift and
327 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
329 * mips-opc.c: Add r3900 insns.
331 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
333 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
334 print delay slot instructions on the same line. When using a PC
335 relative load, add a comment with the value being loaded if it can
338 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
340 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
341 to pushS/popS for segment regs and byte constant so that
342 pushw/popw printed when in 16 bit data mode.
344 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
345 print cbtw, cwtd in 16 bit data mode.
346 * i386-dis.c (putop): extra case W to support above.
348 * i386-dis.c (print_insn_x86): print addr32 prefix when given
349 address size prefix in 16 bit address mode.
351 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
353 * sh-dis.c: Reindent. Rename local variable fprintf to
356 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
358 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
360 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
362 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
364 * mips16-opc.c (mip16_opcodes): same.
366 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
368 * m68k-opc.c (moveb): Change $d to %d.
370 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
372 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
373 (twobyte_has_modrm): Likewise.
375 (OP_MMX, OP_EM, OP_MS): New static functions.
377 * i386-dis.c: Revert patch of April 4. The output now matches
380 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
382 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
385 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
387 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
389 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
391 * Makefile.in (install): Depend upon installdirs.
392 (installdirs): New target.
394 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
396 From Thomas Graichen <graichen@rzpd.de>:
397 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
398 * configure: Rebuild.
400 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
402 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
403 Delete string{,s}.h support.
405 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
407 * cgen-asm.c (cgen_parse_operand_fn): New global.
408 (cgen_parse_{{,un}signed_integer,address}): Update call to
409 cgen_parse_operand_fn.
410 (cgen_init_parse_operand): New function.
411 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
412 from cgen_asm_init_parse.
413 (m32r_cgen_assemble_insn): New operand `errmsg'.
414 Delete call to as_bad, return error message to caller.
415 (m32r_cgen_asm_hash_keywords): #if 0 out.
417 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
419 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
421 [case 'J']: Fix typo in register name.
423 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
425 * configure.in: Substitute SHLIB_LIBS.
426 * configure: Rebuild.
427 * Makefile.in (SHLIB_LIBS): New variable.
428 ($(SHLIB)): Use $(SHLIB_LIBS).
430 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
432 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
434 * cgen-opc.c (hash_keyword_name): Improve algorithm.
436 * disassemble.c (disassembler): Handle m32r.
438 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
440 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
441 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
442 * Makefile.in (CFILES): Add them.
443 (ALL_MACHINES): Add them.
444 (dependencies): Regenerate.
445 * configure.in (cgen_files): New variable.
446 (bfd_m32r_arch): Add entry.
447 * configure: Regenerate.
449 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
451 * configure.in: Correct file names for bfd_mn10[23]00_arch.
452 * configure: Rebuild.
454 * Makefile.in: Rebuild dependencies.
456 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
458 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
461 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
463 * Branched binutils 2.8.
465 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
467 * m10200-dis.c: Rename from mn10200-dis.c.
468 * m10200-opc.c: Rename from mn10200-opc.c.
469 * m10300-dis.c: Rename from mn10300-dis.c
470 * m10300-opc.c: Rename from mn10300-opc.c.
471 * Makefile.in: Update accordingly.
473 * mips16-opc.c: Add mul and dmul macros.
475 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
477 * makefile.vms: Update CFLAGS, add clean target.
479 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
481 * mips-opc.c: Add "wait". From Ralf Baechle
482 <ralf@gnu.ai.mit.edu>.
484 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
485 * configure, config.in: Rebuild.
486 * sysdep.h: Include <stdlib.h> if it exists.
487 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
489 * Makefile.in: Rebuild dependencies.
491 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
493 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
494 Andrew Bray <andy@madhouse.demon.co.uk>.
496 * mips-opc.c: Add cast when setting mips_opcodes.
498 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
500 * v850-dis.c (disassemble): Fix sign extension problem.
501 * v850-opc.c (extract_d*): Fix sign extension problems to make
502 disassembly calculate branch offsets correctly.
504 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
506 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
508 * mips-opc.c: Add dctr and dctw.
511 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
513 * d30v-dis.c (print_insn): Change the way signed constants
516 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
518 * Makefile.in (BFD_H): New variable.
519 (HFILES): New variable.
520 (CFILES): Add all C files.
521 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
522 Delete old dependencies, and build new ones.
523 * dep-in.sed: New file.
525 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
527 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
529 start-sanitize-coldfire
530 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
532 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
535 end-sanitize-coldfire
536 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
538 * mn10200-opc.c: Change "trap" to "syscall".
539 * mn10300-opc.c: Add new "syscall" instruction.
541 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
543 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
544 mulul insns on the coldfire.
546 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
548 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
549 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
550 (print_insn_little_arm): Likewise.
552 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
554 Based on patches from H.J. Lu <hjl@lucon.org>:
555 * i386-dis.c (fetch_data): Add prototype.
556 * m68k-dis.c (fetch_data): Add prototype.
557 (dummy_print_address): Add prototype. Make static.
558 * ppc-opc.c (valid_bo): Add prototype.
559 * sparc-dis.c (build_hash_table): Add prototype.
560 (is_delayed_branch, compute_arch_mask): Add prototypes.
561 (print_insn_sparc): Make several local variables const.
562 (compare_opcodes): Change arguments to const PTR. Add prototype.
563 * sparc-opc.c (arg): Change name field to be const.
564 (lookup_name, lookup_value): Add prototypes. Change table and
565 name parameters to be const.
566 (sparc_encode_asi): Change name parameter to be const.
567 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
568 (sparc_encode_sparclet_cpreg): Likewise.
569 (sparc_decode_asi): Change return type to be const.
570 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
571 (sparc_decode_sparclet_cpreg): Likewise.
573 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
575 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
576 Solaris doesn't like the combined options, and the -f is
578 (stamp-tshlink, install): Likewise.
580 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
582 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
585 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
587 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
589 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
591 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
594 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
596 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
599 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
601 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
603 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
605 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
608 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
610 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
611 floatformat_to_double to make portable.
612 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
615 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
617 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
618 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
620 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
622 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
623 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
626 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
628 * tic80-opc.c (LSI_SCALED): Renamed from this ...
629 (OFF_SL_BR_SCALED): ... to this, and added the flag
630 TIC80_OPERAND_BASEREL to the flags word.
631 (tic80_opcodes): Replace all occurances of LSI_SCALED with
635 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
637 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
638 Change mips_opcodes from const array to a pointer,
639 and change bfd_mips_num_opcodes from const int to int,
640 so that we can increase the size of the mips opcodes table
644 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
646 * tic80-opc.c (tic80_predefined_symbols): Revert change to
647 store BITNUM values in the table in one's complement form
648 to match behavior when assembler is given a raw numeric
649 value for a BITNUM operand.
650 * tic80-dis.c (print_operand_bitnum): Ditto.
654 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
656 * d30v-opc.c: Removed references to FLAG_X.
659 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
661 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
664 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
666 * Makefile.in: Added d30v object files.
667 * configure: (bfd_d30v_arch) Rebuilt.
668 * configure.in: (bfd_d30v_arch) Added new case.
669 * d30v-dis.c: New file.
670 * d30v-opc.c: New file.
671 * disassemble.c (disassembler) Add entry for d30v.
675 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
677 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
678 representations for the floating point BITNUM values.
680 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
682 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
683 in the table in one's complement form, as they appear in the
685 (tic80_symbol_to_value): Use macros to access predefined
687 (tic80_value_to_symbol): Ditto.
688 (tic80_next_predefined_symbol): New function.
689 * tic80-dis.c (print_operand_bitnum): Remove code that did
690 one's complement for BITNUM values.
694 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
696 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
699 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
701 * makefile.vms: Remove 8 bit characters. Update to latest
704 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
706 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
708 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
710 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
711 (IMM24_PCREL): Likewise.
713 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
715 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
716 address for an extended PC relative instruction that is not a
719 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
721 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
725 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
727 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
728 (tic80_opcodes): Sort entries so that long immediate forms
729 come after short immediate forms, making it easier for
730 assembler to select the right one for a given operand.
733 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
735 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
737 (print_insn_mips16): Likewise.
740 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
742 * mips-opc.c: add r5900.
746 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
748 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
749 a symbol class that restricts translation to just that
750 class (general register, condition code, etc).
752 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
754 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
755 and REG_DEST_E for register operands that have to be
756 an even numbered register. Add REG_FPA for operands that
757 are one of the floating point accumulator registers.
758 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
759 (tic80_opcodes): Change entries that need even numbered
760 register operands to use the new operand table entries.
761 Add "or" entries that are identical to "or.tt" entries.
764 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
766 * mips16-opc.c: Add new cases of exit instruction for
768 * mips-dis.c (print_mips16_insn_arg): Display floating point
769 registers in operands of exit instruction. Print `$' before
770 register names in operands of entry and exit instructions.
773 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
775 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
776 pairs for all predefined symbols recognized by the assembler.
777 Also used by the disassembling routines.
778 (tic80_symbol_to_value): New function.
779 (tic80_value_to_symbol): New function.
780 * tic80-dis.c (print_operand_control_register,
781 print_operand_condition_code, print_operand_bitnum):
782 Remove private tables and use tic80_value_to_symbol function.
785 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
787 * d10v-dis.c (print_operand): Change address printing
788 to correctly handle PC wrapping. Fixes PR11490.
790 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
792 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
795 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
797 * mips-dis.c (print_insn_mips16): Set insn_info information.
798 (print_mips16_insn_arg): Likewise.
800 * mips-dis.c (print_insn_mips16): Better handling of an extend
801 opcode followed by an instruction which can not be extended.
803 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
805 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
806 coldfire moveb instruction to not allow an address register as
807 destination. Although the documentation does not indicate that
808 this is invalid, experiments uncovered unexpected behavior.
809 Added a comment explaining the situation. Thanks to Andreas
810 Schwab for pointing this out to me.
813 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
815 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
816 entries are presorted so that entries with the same mnemonic are
817 adjacent to each other in the table. Sort the entries for each
818 instruction so that this is true.
821 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
823 * m68k-dis.c: Include <libiberty.h>.
824 (print_insn_m68k): Sort the opcode table on the most significant
825 nibble of the opcode.
828 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
830 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
831 "vsub", "vst", "xnor", and "xor" instructions.
832 (V_a1): Renamed from V_a, msb of accumulator reg number.
833 (V_a0): Add macro, lsb of accumulator reg number.
835 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
837 * tic80-dis.c (print_insn_tic80): Broke excessively long
838 function up into several smaller ones and arranged for
839 the instruction printing function to be callable recursively
840 to print vector instructions that have both a load and a
841 math instruction packed into a single opcode.
842 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
843 to explain why it comes after the other vector opcodes.
846 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
848 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
849 move insns to handle immediate operands.
851 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
853 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
854 fix operand mask in the "moveml" entries for the coldfire.
857 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
859 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
860 New macros for building vector instruction opcodes.
861 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
862 FMT_LI, which were unused. The field is now a flags field.
863 Remove some opcodes that are possible, but illegal, such
864 as long immediate instructions with doubles for immediate
865 values. Add "vadd" and "vld" instructions.
867 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
869 * tic80-opc.c (tic80_operands): Reorder some table entries to make
870 the order more logical. Move the shift alias instructions ("rotl",
871 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
872 interspersed with the regular sr.x and sl.x instructions. Add
873 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
874 "sub", "subu", "swcr", and "trap".
876 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
878 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
879 (OFF_SL_PC): Renamed from OFF_SL.
880 (OFF_SS_BR): New operand type for base relative operand.
881 (OFF_SL_BR): New operand type for base relative operand.
882 (REG_BASE): New operand type for base register operand.
883 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
884 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
885 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
887 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
888 10 char field, padded with spaces on rhs, rather than a string
889 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
890 than old TIC80_OPERAND_RELATIVE. Add support for new
891 TIC80_OPERAND_BASEREL flag bit.
893 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
895 * tic80-dis.c (print_insn_tic80): Print floating point operands
897 * tic80-opc.c (SPFI): Add single precision floating point
898 immediate operand type.
899 (ROTATE): Add rotate operand type for shifts.
900 (ENDMASK): Add for shifts.
901 (n): Macro for the 'n' bit.
902 (i): Macro for the 'i' bit.
903 (PD): Macro for the 'PD' field.
904 (P2): Macro for the 'P2' field.
905 (P1): Macro for the 'P1' field.
906 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
910 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
912 * mn10200-dis.c (disassemble): Mask off unwanted bits after
913 adding in current address for pc-relative operands.
916 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
918 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
919 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
920 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
921 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
922 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
923 REG_BASE_M_SI, REG_BASE_M_LI respectively.
924 (REG_SCALED, LSI_SCALED): New operand types.
925 (E): New macro for 'E' bit at bit 27.
926 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
927 opcodes, including the various size flavors (b,h,w,d) for
928 the direct load and store instructions.
930 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
932 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
934 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
935 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
936 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
937 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
938 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
939 masks with "MASK_* & ~M_*" to get the M bit reset.
940 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
942 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
944 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
945 correctly. Add support for printing TIC80_OPERAND_BITNUM and
946 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
948 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
949 CC, SICR, and LICR table entries.
950 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
951 "bcnd", and "brcr" opcodes.
954 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
956 * ppc-opc.c (powerpc_operands): Make comment match the
957 actual fields (no shift field).
958 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
960 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
961 partial implementation, work in progress.
962 * tic80-opc.c (tic80_operands): Begin construction operands table.
963 (tic80_opcodes): Continue populating opcodes table and start
964 filling in the operand indices.
965 (tic80_num_opcodes): Add this.
968 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
970 * m68k-opc.c: Add #B case for moveq.
972 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
974 * mn10300-dis.c (disassemble): Make sure all variables are initialized
975 before they are used.
977 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
979 * v850-opc.c (v850_opcodes): Put curly-braces around operands
980 for "breakpoint" instruction.
982 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
984 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
985 (dep): Use ALL_CFLAGS rather than CFLAGS.
987 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
989 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
992 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
994 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
996 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
999 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1001 * mips16-opc.c: Add "abs".
1003 start-sanitize-tic80
1004 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1006 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1007 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1008 (disassembler): Add bfd_arch_tic80 support to set disassemble
1009 to print_insn_tic80.
1010 * tic80-dis.c (print_insn_tic80): Add stub.
1012 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1014 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1015 * configure: Regenerate with autoconf.
1016 * tic80-dis.c: Add file.
1017 * tic80-opc.c: Add file.
1020 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1022 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1024 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1026 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1027 (mn10200_opcodes): Use it for some logicals and btst insns.
1028 Add "break" and "trap" instructions.
1030 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1032 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1034 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1036 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1037 relative load or add now depends upon whether the instruction is
1040 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1042 * mn10200-dis.c: Finish writing disassembler.
1043 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1044 Fix mask for "jmp (an)".
1046 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1047 handle endianness issues for mn10300.
1049 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1051 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1053 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1054 instruction. Fix opcode field for "movb (imm24),dn".
1056 * mn10200-opc.c (mn10200_operands): Fix insertion position
1059 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1061 * mn10200-opc.c: Create mn10200 opcode table.
1062 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1063 but moving along nicely.
1065 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1067 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1069 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1071 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1072 specifiers for fmovem* instructions.
1074 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1076 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1078 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1080 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1083 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1085 * mn10300-opc.c: Add some comments explaining the various
1088 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1090 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1092 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1095 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1096 operand specifiers in fmovm* instructions.
1098 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1100 * ppc-opc.c (insert_li): Give an error if the offset has the two
1101 least significant bits set.
1103 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1105 * mips-dis.c (print_insn_mips16): Separate the instruction from
1106 the arguments with a tab, not a space.
1108 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1110 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1113 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1116 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1118 * configure: Rebuild with autoconf 2.12.
1120 Add support for mips16 (16 bit MIPS implementation):
1121 * mips16-opc.c: New file.
1122 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1123 (mips16_reg_names): New static array.
1124 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1125 after seeing a 16 bit symbol.
1126 (print_insn_little_mips): Likewise.
1127 (print_insn_mips16): New static function.
1128 (print_mips16_insn_arg): New static function.
1129 * mips-opc.c: Add jalx instruction.
1130 * Makefile.in (mips16-opc.o): New target.
1131 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1132 * configure: Rebuild.
1134 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1136 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1137 operand specifiers in *save, *restore and movem* instructions.
1139 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1142 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1143 register operands for immediate arithmetic, not, neg, negx, and
1144 set according to condition instructions.
1146 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1147 specifier of the effective-address operand in immediate forms of
1148 arithmetic instructions. The specifier for the immediate operand
1149 notes how and where the constant will be stored.
1151 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1153 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1156 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1159 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1161 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1163 * mn10300-dis.c (disassemble): Handle register lists.
1165 * mn10300-opc.c: Fix handling of register list operand for
1166 "call", "ret", and "rets" instructions.
1168 * mn10300-dis.c (disassemble): Print PC-relative and memory
1169 addresses symbolically if possible.
1170 * mn10300-opc.c: Distinguish between absolute memory addresses,
1171 pc-relative offsets & random immediates.
1173 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1175 (disassemble): Handle SPLIT and EXTENDED operands.
1177 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1179 * mn10300-dis.c: Rough cut at printing some operands.
1181 * mn10300-dis.c: Start working on disassembler support.
1182 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1184 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1186 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1188 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1190 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1192 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1194 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1195 register argument is calls and jmp instructions.
1197 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1199 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1200 getx operand. Fix opcode for mulqu imm,dn.
1202 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1204 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1205 in MN10300_OPERAND_SPLIT operands for how many bits
1206 appear in the basic insn word. Add IMM32_HIGH24,
1207 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1208 (mn10300_opcodes): Use new operands as needed.
1210 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1211 for bset, bclr, btst instructions.
1212 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1214 * mn10300-opc.c (mn10300_operands): Remove many redundant
1215 operands. Update opcode table as appropriate.
1216 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1217 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1219 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1221 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1222 operands (for indexed load/stores). Fix bitpos for DI
1223 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1224 few instructions that insert immediates/displacements in the
1225 middle of the instruction. Add IMM8E for 8 bit immediate in
1226 the extended part of an instruction.
1227 (mn10300_operands): Use new opcodes as appropriate.
1229 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1231 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1232 sequential so the assembler never parallelizes it with
1235 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1237 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1238 a data/address register that appears in register field 0
1239 and register field 1.
1240 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1242 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1244 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1245 standard disassembly.
1247 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1248 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1249 Recategorize PALcode instructions.
1251 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1253 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1255 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1257 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1258 there are no operand types.
1260 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1262 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1264 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1266 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1268 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1270 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1272 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1273 and sst.w instructions.
1275 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1278 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1280 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1283 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1285 * ppc-opc.c (PPCPWR2): Define.
1286 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1289 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1291 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1292 field for movhu instruction.
1294 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1295 cast value to "long" not "signed long" to keep hpux10
1298 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1300 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1303 * mn10300-opc.c (FMT*): Remove definitions.
1305 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1306 for shift-by-register opcodes.
1308 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1309 into [AD][MN][01] for encoding the position of the register
1312 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1314 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1315 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1317 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1319 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1320 Fix various typos. Add "PAREN" operand.
1321 (MEM, MEM2): Define.
1322 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1323 operands. Fix several typos.
1325 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1328 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1330 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1331 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1333 (mn10300_opcodes): Break opcode format out into its own field.
1334 Update many operand fields to deal with signed vs unsigned
1335 issues. Fix one or two typos in the "mov" instruction
1336 opcode, mask and/or operand fields.
1338 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1340 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1341 m68851 wasn't reset.
1343 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1345 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1346 all opcodes. Very rough cut at operands for all opcodes.
1348 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1351 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1353 * mn10200-opc.c, mn10300-opc.c: New files.
1354 * mn10200-dis.c, mn10300-dis.c: New files.
1355 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1356 * disassemble.c: Break mn10x00 support into 10200 and 10300
1358 * configure.in: Likewise.
1359 * configure: Rebuilt.
1361 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1363 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1365 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1367 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1369 * disassemble (ARCH_mn10x00): Define.
1370 (disassembler): Handle bfd_arch_mn10x00.
1371 * configure.in: Recognize bfd_mn10x00_arch.
1372 * configure: Rebuilt.
1374 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1376 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1377 accordingly. Don't declare functions using op_rtn.
1379 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1381 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1382 params to be more standard.
1383 * (disassemble): Print absolute addresses and symbolic names for
1384 branch and jump targets.
1385 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1387 * (v850_opcodes): Add breakpoint insn.
1389 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1391 * m68k-opc.c: Move the fmovemx data register cases before the
1392 other cases, so that they get recognized before the data register
1393 does gets treated as a degenerate register list.
1395 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1397 * mips-opc.c: Add a case for "div" and "divu" with two registers
1398 and a destination of $0.
1400 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1402 * mips-dis.c (print_insn_arg): Add prototype.
1403 (_print_insn_mips): Ditto.
1405 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1407 * mips-dis.c (print_insn_arg): Print condition code registers as
1410 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1412 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1414 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1416 * v850-dis.c (disassemble): Make static. Provide prototype.
1418 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1420 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1423 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1425 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1426 ']' characters into the output stream.
1427 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1428 Add "memop" field to all opcodes (for the disassembler).
1429 Reorder opcodes so that "nop" comes before "mov" and "jr"
1430 comes before "jarl".
1432 * v850-dis.c (print_insn_v850): Fix typo in last change.
1434 * v850-dis.c (print_insn_v850): Properly handle disassembling
1435 a two byte insn at the end of a memory region when the memory
1436 region's size is only two byte aligned.
1438 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1440 * v850-dis.c (v850_reg_names): Define.
1441 (v850_sreg_names, v850_cc_names): Likewise.
1442 (disassemble): Very rough cut at printing operands (unformatted).
1444 * v850-opc.c (BOP_MASK): Fix.
1445 (v850_opcodes): Fix mask for jarl and jr.
1447 * v850-dis.c: New file. Skeleton for disassembler support.
1448 * Makefile.in Remove v850 references, they're not needed here.
1449 * configure.in: Add v850-dis.o when building v850 toolchains.
1450 * configure: Rebuilt.
1451 * disassemble.c (disassembler): Call v850 disassembler.
1453 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1454 (insert_d8_6, extract_d8_6): New functions.
1455 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1456 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1458 (IF4A, IF4B): Use "D7" instead of "D7S".
1459 (IF4C, IF4D): Use "D8_7" instead of "D8".
1460 (IF4E, IF4F): New. Use "D8_6".
1461 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1462 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1464 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1465 (v850_operands): Change D16 to D16_15, use special insert/extract
1466 routines. New new D16 that uses the generic insert/extract code.
1467 (IF7A, IF7B): Use D16_15.
1468 (IF7C, IF7D): New. Use D16.
1469 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1471 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1472 message. Issue an error if the branch offset is odd.
1474 * v850-opc.c: Add notes about needing special insert/extract
1475 for all the load/store insns, except "ld.b" and "st.b".
1477 * v850-opc.c (insert_d22, extract_d22): New functions.
1478 (v850_operands): Use insert_d22 and extract_d22 for
1480 (insert_d9): Fix range check.
1482 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1484 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1485 and set bits field to D9 and D22 operands.
1487 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1489 * v850-opc.c (v850_operands): Define SR2 operand.
1490 (v850_opcodes): "ldsr" uses R1,SR2.
1492 * v850-opc.c (v850_opcodes): Fix opcode specs for
1493 sld.w, sst.b, sst.h, sst.w, and nop.
1495 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1497 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1498 end of the opcode table.
1500 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1502 * d10v-opc.c (pre_defined_registers): Added register pairs,
1503 "r0-r1", "r2-r3", etc.
1505 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1507 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1508 Create I16U for an unsigned 16bit mmediate operand.
1509 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1511 * v850-opc.c (v850_operands): Define EP operand.
1512 (IF4A, IF4B, IF4C, IF4D): Use EP.
1514 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1515 with immediate operand, "movhi". Tweak "ldsr".
1517 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1518 correct. Get sld.[bhw] and sst.[bhw] closer.
1520 * v850-opc.c (v850_operands): "not" is a two byte insn
1522 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1524 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1526 * v850-opc.c (two): Get order of words correct.
1528 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1530 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1531 register source and destination operands.
1532 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1534 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1535 same thinko in "trap" opcode.
1537 * v850-opc.c (v850_opcodes): Add initializer for size field
1540 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1541 Add D8 for 8-bit unsigned field in short load/store insns.
1542 (IF4A, IF4D): These both need two registers.
1543 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1544 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1545 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1546 for "ldsr" and "stsr".
1547 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1550 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1551 short store word (sst.w).
1553 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1555 * v850-opc.c (v850_operands): Added insert and extract fields,
1556 pointers to functions that handle unusual operand encodings.
1558 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1560 * v850-opc.c (v850_opcodes): Enable "trap".
1562 * v850-opc.c (v850_opcodes): Fix order of displacement
1563 and register for "set1", "clr1", "not1", and "tst1".
1565 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1567 * v850-opc.c (v850_operands): Add "B3" support.
1568 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1571 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1573 * v850-opc.c: Close unterminated comment.
1575 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1577 * v850-opc.c (v850_operands): Add flags field.
1578 (v850_opcodes): add move opcodes.
1580 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1582 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1583 * configure: (bfd_v850v_arch) Add new case.
1584 * configure.in: (bfd_v850_arch) Add new case.
1585 * v850-opc.c: New file.
1587 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1589 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1591 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1593 * d10v-opc.c: Add additional information to the opcode
1594 table to help determinine which instructions can be done
1597 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1599 * mpw-make.sed: Update editing of include pathnames to be
1602 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1604 * arm-opc.h: Added "bx" instruction definition.
1606 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1608 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1610 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1612 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1614 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1616 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1618 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1620 * makefile.vms: Update for alpha-opc changes.
1622 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1624 * i386-dis.c (print_insn_i386): Actually return the correct value.
1625 (ONE, OP_ONE): #ifdef out; not used.
1627 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1629 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1630 Changed subi operand type to treat 0 as 16.
1632 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1634 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1637 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1639 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1640 memory transfer instructions. Add new format string entries %h and %s.
1641 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1644 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1646 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1647 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1649 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1651 * alpha-dis.c (print_insn_alpha_osf): Remove.
1652 (print_insn_alpha_vms): Remove.
1653 (print_insn_alpha): Make globally visible. Chose the register
1654 names based on info->flavour.
1655 * disassemble.c: Always return print_insn_alpha for the alpha.
1657 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1659 * d10v-dis.c (dis_long): Handle unknown opcodes.
1661 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1663 * d10v-opc.c: Changes to support signed and unsigned numbers.
1664 All instructions with the same name that have long and short forms
1665 now end in ".l" or ".s". Divs added.
1666 * d10v-dis.c: Changes to support signed and unsigned numbers.
1668 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1670 * d10v-dis.c: Change all functions to use info->print_address_func.
1672 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1674 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1675 move ccr/sr insns more strict so that the disassembler only
1676 selects them when the addressing mode is data register.
1678 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1679 * d10v-opc.c (pre_defined_registers): Declare.
1680 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1681 to pick a better name for the registers.
1683 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1685 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1686 operands for fexpand and fpmerge. From Christian Kuehnke
1687 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1689 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1691 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1692 print routine. Take new regnames and cpumask arguments.
1693 Kill the environment variable nonsense.
1694 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1695 (print_insn_alpha_vms): New function. Do VMS style regnames.
1696 * disassemble.c (disassembler): Test bfd flavour to pick
1697 between OSF and VMS routines. Default to OSF.
1699 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1701 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1702 * configure: Rebuild.
1703 * Makefile.in (install): Use @INSTALL_SHLIB@.
1705 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1707 * configure: (bfd_d10v_arch) Add new case.
1708 * configure.in: (bfd_d10v_arch) Add new case.
1709 * d10v-dis.c: New file.
1710 * d10v-opc.c: New file.
1711 * disassemble.c (disassembler) Add entry for d10v.
1713 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1715 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1716 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1718 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1720 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1721 distinguish between variants of the instruction set.
1722 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1723 distinguish between variants of the instruction set.
1725 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1727 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1728 the 8086 instruction set.
1729 * i386-dis.c: General cleanups. Make most things static. Add
1730 prototypes. Get rid of static variables aflags and dflags. Pass
1731 them as args (to almost everything).
1733 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1735 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1737 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1739 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1740 if the next arg is marked with SRC_IN_DST. Gross.
1742 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1743 we're looking for and find EXR.
1745 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1746 if we're looking for KBIT and we don't find it.
1748 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1751 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1752 3bit immediate operands.
1754 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1756 * Released binutils 2.7.
1758 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1759 <kkaempf@progis.ac-net.de>.
1761 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1763 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1765 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1767 * sparc-dis.c (print_insn_sparclite): New routine to print
1768 sparclite instructions.
1770 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1772 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1774 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1776 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1777 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1778 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1780 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1782 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1783 Use autoconf-set values.
1784 (docdir, oldincludedir): Removed.
1785 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1787 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1789 * alpha-opc.c: New file.
1790 * alpha-opc.h: Remove.
1791 * alpha-dis.c: Complete rewrite to use new opcode table.
1792 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1793 * configure: Rebuild with autoconf 2.10.
1794 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1795 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1797 (alpha-opc.o): New target.
1799 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1801 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1802 Set imm_added_to_rs1 even if the source and destination register
1805 * sparc-opc.c: Add some two operand forms of the wr instruction.
1807 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1809 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1812 * disassemble.c (disassembler): Handle H8/S.
1813 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1815 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1817 * sparc-opc.c: Add beq/teq as aliases for be/te.
1819 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1820 <sergei@msil.sps.mot.com>.
1822 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1824 * makefile.vms: New file.
1826 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1828 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1830 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1833 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1835 * i386-dis.c (OP_OFF): Call append_prefix.
1837 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1839 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1840 unsigned long to silence a warning from the Solaris PowerPC
1843 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1845 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1847 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1849 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1851 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1852 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1853 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1854 cpush, cpusha, cpull sparclet insns.
1856 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1858 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1860 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1862 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1863 Set F_FLOAT on other floating point instructions.
1865 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1867 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1869 (powerpc_opcodes): Add 860/821 specific SPRs.
1871 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1873 * configure.in: Permit --enable-shared to specify a list of
1874 directories. Set and substitute BFD_PICLIST.
1875 * configure: Rebuild.
1876 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1877 uses. Set to @BFD_PICLIST@.
1879 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1881 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1882 not "abs", which may be needed for the absolute in something
1883 like btst #0,@10:8. Print L_3 immediates separately from other
1884 immediates. Change ABSMOV reference to ABS8MEM.
1886 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1888 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1889 (current_arch_mask): New static global.
1890 (compute_arch_mask): New static function.
1891 (print_insn_sparc): Delete sparc_v9_p. New static local
1892 current_mach. Resort opcode table if current_mach changes.
1893 Generalize "insn not supported" test.
1894 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1895 Delete test for v9/!v9.
1896 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1898 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1899 (brfcx): Renamed to FBRX.
1900 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1901 coprocessor mnemonics are not supported on the sparclet).
1902 (condf): Renamed to CONDF.
1903 (SLCBCC2): Delete F_ALIAS flag.
1905 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1907 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1908 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1910 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1912 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1913 that the shared library version number is set correctly.
1915 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1917 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1918 Miles Bader <miles@gnu.ai.mit.edu>.
1919 * configure: Rebuild.
1921 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1923 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1926 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1928 * configure: Rebuild with autoconf 2.8.
1930 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1932 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1933 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1935 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1937 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1938 since they appear as targets in Makefile.in.
1939 * configure: Rebuild.
1941 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1943 * mpw-make.sed: Edit out shared library support bits.
1945 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1947 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1948 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1949 (sparc_opcodes): Add sparclet insns.
1950 (sparclet_cpreg_table): New static local.
1951 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1952 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1954 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1956 * i386-dis.c (index16): New static variable.
1957 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1959 (OP_indirE): Return result of OP_E.
1960 (OP_E): Check for 16 bit addressing mode, and disassemble
1961 correctly. Optimised 32 bit case a little. Don't print
1962 "(base,index,scale)" when sib specifies only an offset.
1964 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1966 * configure.in: Set and substitute SHLIB_DEP.
1967 * configure: Rebuild.
1968 * Makefile.in (SHLIB_DEP): New variable.
1969 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1970 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1971 COMMON_SHLIB, add them to piclist with appropriate modifications.
1972 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1973 here: just use piclist.
1975 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1977 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1978 (print_insn_sparc): Rewrite v9/not-v9 tests.
1979 (compare_opcodes): Likewise.
1980 * sparc-opc.c (MASK_<ARCH>): Define.
1981 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1982 (sparclet,v6notv9): Define.
1983 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1984 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1986 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1988 * configure.in: Call AC_PROG_CC before configure.host.
1989 * configure: Rebuild.
1991 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1993 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1995 * i386-dis.c (onebyte_has_modrm): New static array.
1996 (twobyte_has_modrm): New static array.
1997 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1999 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2001 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2004 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2006 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2009 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2011 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2012 m68010up, not just m68020up | cpu32.
2014 * Makefile.in (SONAME): New variable.
2015 ($(SHLINK)): Make a link to the transformed name, as well.
2016 (stamp-tshlink): New target.
2017 (install): Skip stamp-tshlink during install.
2019 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2021 * configure.in: Call AC_ARG_PROGRAM.
2022 * configure: Rebuild.
2023 * Makefile.in (program_transform_name): New variable.
2024 (install): Transform library name before installing it.
2026 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2028 * i960-dis.c (mem): Add HX dcinva instruction.
2030 Support for building as a shared library, based on patches from
2031 Alan Modra <alan@spri.levels.unisa.edu.au>:
2032 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2033 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2034 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2035 * configure: Rebuild.
2036 * Makefile.in (ALLLIBS): New variable.
2037 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2038 (COMMON_SHLIB, SHLINK): New variables.
2039 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2040 (STAGESTUFF): Remove variable.
2041 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2042 (stamp-piclist, piclist): New targets.
2043 ($(SHLIB), $(SHLINK)): New targets.
2044 ($(OFILES)): Depend upon stamp-picdir.
2045 (disassemble.o): Build twice if PICFLAG is set.
2046 (MOSTLYCLEAN): Add pic/*.o.
2047 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2048 (distclean): Remove pic and stamp-picdir.
2049 (install): Install shared libraries.
2050 (stamp-picdir): New target.
2052 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2054 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2055 Print unknown instruction as "unknown", rather than in hex.
2057 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2059 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2061 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2063 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2065 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2067 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2068 when necessary. From Ulrich Drepper
2069 <drepper@myware.rz.uni-karlsruhe.de>.
2071 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2073 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2074 sparc_num_opcodes. Update architecture enum values.
2075 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2076 (sparc_opcode_lookup_arch): New function.
2077 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2078 (sparc_opcodes): Add v9a shutdown insn.
2080 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2082 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2083 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2085 (print_insn_sparc64): Deleted.
2086 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2089 * sparc-opc.c (architecture_pname): Add v9a.
2091 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2093 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2094 incorrectly defined as 0x16 when it should be 0x15.
2095 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2096 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2097 excb (exception barrier) which is defined in the Alpha
2098 Architecture Handbook version 2.
2099 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2100 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2101 disassembled as or, for example.
2103 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2105 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2106 (_print_insn_mips): Change i from int to unsigned int.
2108 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2110 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2111 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2113 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2115 * i386-dis.c: Added Pentium Pro instructions.
2117 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2119 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2122 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2124 * sh-opc.h (sh_nibble_type): Added REG_B.
2125 (sh_arg_type): Added A_REG_B.
2126 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2128 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2130 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2132 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2134 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2136 * Makefile.in (distclean): Remove stamp-h. From Ronald
2137 F. Guilmette <rfg@monkeys.com>.
2139 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2141 From David Mosberger-Tang <davidm@azstarnet.com>:
2142 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2145 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2147 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2148 (sh_table): Added many SH3 opcodes.
2149 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2151 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2153 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2154 (subco,subco.): Mark this PPC, not PPCCOM.
2156 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2158 * configure: Rebuild with autoconf 2.7.
2160 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2162 * configure: Rebuild with autoconf 2.6.
2164 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2166 * configure.in: Sort list of architectures. Accept but do nothing
2167 for alliant, convex, pyramid, romp, and tahoe.
2169 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2171 * a29k-dis.c (print_special): Change num to unsigned int.
2173 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2175 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2178 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2180 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2181 * configure: Rebuilt.
2183 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2185 * configure.in: Add case for bfd_i860_arch.
2186 * configure: Rebuild.
2188 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2190 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2191 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2192 (NEXTDOUBLE): Likewise.
2193 (print_insn_m68k): Don't match fmoveml if there is more than one
2194 register in the list.
2195 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2197 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2199 * m68k-opc.c: Use #W rather than #w.
2200 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2202 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2204 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2205 and likewise for all the dbxx opcodes.
2207 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2209 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2211 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2213 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2214 the VR4100 specific instructions to the mips_opcodes structure.
2216 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2218 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2219 ugly Metrowerks bug in CW6, is fixed in CW7.
2221 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2223 * ppc-opc.c (whole file): Add flags for common/any support.
2225 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2227 * Makefile.in (BISON): Remove macro.
2228 (FLAGS_TO_PASS): Remove BISON.
2230 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2232 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2234 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2235 instructions that take no args by looking at the match mask.
2236 (print_insn_arg): Always print "%" before register names.
2237 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2238 [case '_']: Don't print "@#" before address.
2239 [case 'J']: Use "%s" as format string, not register name.
2240 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2242 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2244 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2247 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2249 From David Mosberger-Tang <davidm@azstarnet.com>
2251 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2252 (alpha_insn_set): added definitions for VAX floating point
2253 instructions (Unix compilers don't generate these, but handcoded
2254 assembly might still use them).
2256 * alpha-dis.c (print_insn_alpha): added support for disassembling
2257 the miscellaneous instructions in the Alpha instruction set.
2259 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2261 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2262 no longer create sysdep.h, sed ppc-opc.c to work around a
2263 serious Metrowerks C bug.
2264 * mpw-make.in: Remove.
2265 * mpw-make.sed: New file, used by mpw-configure to edit
2266 Makefile.in into an MPW makefile.
2268 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2270 * Makefile.in (maintainer-clean): New synonym for realclean.
2272 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2274 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2275 which use '0', '1', and '2' instead. Specify the proper size for
2276 a pmove immediate operand. Correct the pmovefd patterns to be
2277 moves to a register, not from a register.
2278 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2280 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2282 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2283 %psr, %wim, %tbr as F_NOTV9.
2285 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2287 * Makefile.in (Makefile): Just rebuild Makefile when running
2289 (config.h, stamp-h): New targets.
2290 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2291 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2292 rebuilding config.h.
2293 * configure: Rebuild.
2295 * mips-opc.c: Change unaligned loads and stores with "t,A"
2296 operands to use "t,A(b)".
2298 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2300 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2302 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2304 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2305 until 3 instead of until 2.
2307 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2309 * Makefile.in (ALL_CFLAGS): Define.
2310 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2311 (MOSTLYCLEAN): Add config.log.
2312 (distclean): Don't remove config.log.
2313 * configure.in: Substitute HDEFINES.
2314 * configure: Rebuild.
2316 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2318 * sh-opc.h (sh_arg_type): Add F_FR0.
2319 (sh_table, case fmac): Add F_FR0 as first argument.
2321 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2323 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2325 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2327 * sparc-dis.c: Remove all references to NO_V9.
2329 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2331 * aclocal.m4: Just include ../bfd/aclocal.m4.
2332 * configure: Rebuild.
2334 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2336 * sparc-dis.c (X_DISP19): Define.
2337 (print_insn, case 'G'): Use it.
2338 (print_insn, case 'L'): Sign extend displacement.
2340 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2342 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2343 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2344 host_makefile_frag or frags.
2345 * aclocal.m4: New file.
2346 * configure: Rebuild.
2347 * Makefile.in (INSTALL): Set to @INSTALL@.
2348 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2349 (INSTALL_DATA): Set to @INSTALL_DATA@.
2351 (AR_FLAGS): Set to rc rather than qc.
2352 (CC): Define as @CC@.
2353 (CFLAGS): Set to @CFLAGS@.
2354 (@host_makefile_frag@): Remove.
2355 (config.status): Remove dependency upon @frags@.
2357 * configure.in: ../bfd/config.bfd now just sets shell variables.
2358 Use them rather than looking through target Makefile fragments.
2359 * configure: Rebuild.
2361 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2363 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2365 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2367 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2368 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2371 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2372 (lookup_{name,value}): New functions.
2373 (prefetch_table): New static local.
2374 (sparc_{encode,decode}_prefetch): New functions.
2375 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2377 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2379 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2382 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2384 * sh-dis.c: Correct comment on first line of file.
2386 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2388 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2390 * sparc-opc.c (asi, membar): New static locals.
2391 (sparc_{encode,decode}_{asi,membar}): New functions.
2392 (sparc_opcodes, membar insn): Fix.
2393 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2394 Support decoding of membar masks.
2397 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2399 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2401 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2403 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2404 and likewise for the other branches. Add bhs as an alias for bcc,
2405 and likewise for the size variants. Add dbhs as an alias for
2408 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2410 * sh-opc.h (FP sts instructions): Update to match reality.
2412 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2414 * m68k-dis.c: (fpcr_names): Add % before all register names.
2415 (reg_names): Likewise.
2416 (print_insn_arg): Don't explicitly print % before register names.
2417 Add % before register names in static array names. In case 'r',
2418 print data registers as `@(Dn)', not `Dn@'. When printing a
2419 memory address, don't print @# before it.
2420 (print_indexed): Change base_disp and outer_disp from int to
2421 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2422 syntax. Sign extend 8 byte displacement correctly.
2423 (print_base): Print using MIT syntax. Print zpc when appropriate.
2424 Change parameter disp from int to bfd_vma.
2426 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2429 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2431 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2432 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2433 * sh-opc.h (sh_arg_type): Add new operand types.
2434 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2436 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2438 * Makefile.in (distclean): Remove generated file config.h.
2440 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2442 * Makefile.in (distclean): Remove generated file config.h.
2444 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2446 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2448 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2450 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2451 rather than numopcodes. Use m68k_opcodes rather than removed
2452 opcode function. Don't check F_ALIAS.
2453 (print_insn_arg): Change first parameter to be const char *.
2454 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2455 (m68k-opc.o): New target.
2456 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2457 * configure: Rebuild.
2459 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2461 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2462 (opcode_bits, opcode_hash_table): New variables.
2463 (opcodes_initialized): Renamed from opcodes_sorted.
2464 (build_hash_table): New function.
2465 (is_delayed_branch): Use hash table.
2466 (print_insn): Renamed from print_insn_sparc, made static.
2467 Build and use hash table. If !sparc64, ignore sparc64 insns,
2468 and vice-versa if sparc64.
2469 (print_insn_sparc, print_insn_sparc64): New functions.
2470 (compare_opcodes): Move sparc64 opcodes to end.
2471 Print commutative insns with constant second.
2472 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2474 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2476 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2477 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2478 avoids printing a delay slot in a delay slot.
2479 * sh-opc.h (sh_table): Fully bracket last entry.
2481 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2483 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2485 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2487 * configure.in: Get host_makefile_frag from ${srcdir}.
2489 * configure.in: Autoconfiscated. Check for string[s].h. Create
2490 config.h from config.in. Don't set up sysdep.h link.
2491 * sysdep.h: New file.
2492 * configure, config.in: New files, generated from configure.in.
2493 * Makefile.in: Updated to be processed autoconf-style.
2494 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2495 (Makefile): Depend on config.status.
2496 (config.status): New rule.
2497 * configure.bat: Update Makefile substitutions.
2499 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2501 * mips-opc.c (L1): Define.
2502 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2503 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2506 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2508 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2509 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2510 have multiple add units but only a single logical unit.
2512 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2513 shifted by 18, without any insertion or extraction function.
2514 (insert_cr, extract_cr): Remove.
2516 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2518 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2521 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2523 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2524 * sh-opc.h: Add copyright.
2526 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2528 * Makefile.in (crunch-m68k): Delete extra target accidentally
2529 checked in a while ago.
2531 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2533 * sh-opc.h (sh_table): Add SH3 support.
2535 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2537 * sh-opc.h: Added bsrf and braf.
2539 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2541 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2542 bogus [ls]fm{ea,fd} patterns.
2544 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2545 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2546 initialize it from memory. Make function static.
2547 (print_insn_{big,little}_arm): New functions.
2548 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2549 the correct endianness.
2551 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2553 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2556 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2558 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2559 17th, so that it builds again using GCC as the compiler.
2561 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2563 * mips-dis.c (print_insn_little_mips): Cast return value from
2564 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2565 expects an unsigned long, and that might be fewer words of
2566 argument storage (e.g., if bfd_vma is long long on a 32-bit
2568 (print_insn_big_mips): Likewise with bfd_getb32 value.
2569 (_print_insn_mips): Now static.
2571 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2573 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2574 gcc memory hog problem with initializer is fixed.
2576 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2578 Merge in support for Mac MPW as a host.
2579 (Old change descriptions retained for informational value.)
2581 * mpw-config.in (archname): Compute from the config.
2582 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2584 * mpw-config.in (target_arch): Compute from canonical target.
2585 (m68k, mips, powerpc, sparc): Add architectures.
2586 * mpw-make.in (disassemble.c.o): Add.
2587 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2589 * mpw-config.in (BFD_MACHINES): Set to a default value.
2590 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2592 * mpw-make.in (CSEARCH): Add extra-include to search path.
2594 * mpw-config.in (varargs.h): Don't create.
2595 (sysdep.h): Create using forward-include.
2596 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2598 * mpw-config.in: New file, MPW version of configure.in.
2599 * mpw-make.in: New file, MPW version of Makefile.in.
2601 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2603 * alpha-dis.c (print_insn_alpha): Put empty statement after
2606 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2608 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2609 (low_sign_extend): Likewise.
2610 (get_field): Delete unused function.
2611 (set_field, deposit_14, deposit_21): Likewise.
2613 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2615 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2618 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2620 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2622 * alpha-opc.h (OSF_ASMCODE): define
2623 print pal-code names as defined in App C of the
2624 Alpha Architecture Reference Manual
2626 * alpha-dis.c: cleaned up output
2627 print stylized code forms as defined in App A.4.3 of the
2628 Alpha Architecture Reference Manual
2630 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2632 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2634 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2637 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2639 * m68k-dis.c (opcode): New function. Returns address of opcode
2640 table entry given index, even if the opcode table was split to
2641 work around gcc bugs.
2642 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2644 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2645 (reg_names): Now const.
2646 (print_insn_arg): Arrays cacheFieldName and names now const.
2647 (print_indexed): Array scales now const.
2649 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2651 * ppc-opc.c: Sort recently added instructions by minor opcode
2652 number within major opcode number.
2654 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2656 * hppa-dis.c: Include libhppa.h.
2658 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2660 * mips-opc.c: Change dli to use M_DLI, and add dla.
2662 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2664 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2666 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2668 * mips-opc.c: Add r4650 mul instruction.
2670 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2672 * mips-opc.c: Add uld and usd macros for unaligned double load and
2675 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2677 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2678 mfdcr, mtdcr, icbt, iccci.
2680 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2682 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2683 signed char fields to shorts, more portable.
2685 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2687 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2688 char fields as signed chars, since they may have negative values.
2690 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2692 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2693 (mycroft@netbsd.org).
2695 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2697 From "Logg, Ed" <elogg@ea.com>:
2698 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2699 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2702 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2704 * ppc-opc.c: Changes based on patch from David Edelsohn
2705 <edelsohn@mhpcc.edu>.
2706 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2709 (insert_tbr): New static function.
2710 (extract_tbr): New static function.
2711 (XFXFXM_MASK, XFXM): Define.
2712 (XSPRBAT_MASK, XSPRG_MASK): Define.
2713 (powerpc_opcodes): Add instructions to access special registers by
2714 name. Add mtcr and mftbu.
2716 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2718 * mips-opc.c (P3): Define.
2719 (mips_opcodes): Add mad and madu.
2721 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2723 * configure.in: Add W65 support.
2724 * disassemble.c: Likewise.
2725 * w65-opc.h, w65-dis.c: New files.
2727 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2729 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2732 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2734 * mips-opc.c: Add dli as a synonym for li.
2736 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2738 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2739 print something for reserved opcode values, even if it won't
2742 * mips-dis.c (_print_insn_mips): When initializing, shift right
2743 and mask, to avoid sign extension problems on the Alpha.
2745 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2748 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2750 * sh-opc.h (mov.l gbr): Get direction right.
2751 * sh-dis.c (print_insn_shx): New function.
2752 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2753 print opcodes with right byte order.
2755 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2757 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2758 to avoid conflicts with getopt.
2760 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2762 * hppa-dis.c (print_insn_hppa): Read the instruction using
2763 bfd_getb32, so that it works on a little endian or 64 bit host.
2764 Remove unused local variable op.
2766 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2768 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2769 addu does not work correctly if -mips3.
2771 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2773 * a29k-dis.c (print_special): Add special register names defined
2774 on 29030, 29040 and 29050.
2775 (print_insn): Handle new operand type 'I'.
2777 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2779 * Makefile.in (INSTALL): Use top level install.sh script.
2781 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2783 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2784 that it works on a little endian host.
2786 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2788 * configure.in: Use ${config_shell} when running config.bfd.
2790 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2792 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2794 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2796 * a29k-dis.c (print_insn): Print the opcode.
2798 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2800 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2802 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2804 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2806 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2808 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2809 which store a value into memory.
2811 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2813 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2814 * arm-dis.c, arm-opc.h: New files.
2816 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2818 * Makefile.in (ns32k-dis.o): Add dependency.
2819 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2820 string, not as array of chars.
2822 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2824 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2826 * sparc-opc.c: Added sparclite extended FP operations, and
2827 versions of v9 impdep* instructions permitting specification of
2830 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2832 * i960-dis.c (reg_names): Now const.
2833 (struct sparse_tabent): New type, copied from array type in mem
2835 (ctrl): Local static array ctrl_tab now const.
2836 (cobr): Local static array cobr_tab now const.
2837 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2838 static variable mem_tab no longer explicitly initialized. Changed
2839 mem_init to const array of struct sparse_tabent.
2840 (reg): Local static variable reg_tab no longer explicitly
2841 initialized. Changed reg_init to const array of struct
2843 (ea): Local static array scale_tab now const.
2845 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2848 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2850 * configure.bat: the disassember needs to be enabled for
2851 "objdump -d" to work in djgpp.
2853 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2855 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2856 (invalid_float): Enabled general version, doesn't require running
2857 on ns32k host. Changed to take char* argument, and test for
2858 explicitly specified sizes, instead of using sizeof() on host CPU
2860 (INVALID_FLOAT): Cast first argument.
2861 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2862 list_P032, list_M032): Now const.
2863 (optlist, list_search): Made appropriate arguments now point to
2865 (print_insn_arg): Changed static array of one-character-string
2866 pointers into a static const array of characters; fixed sprintf
2867 statement accordingly.
2869 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2871 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2872 from distribution. A ns32k-dis.c from a previous distribution has
2873 been brought up to date and supports the new interface.
2875 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2877 * configure.in: add bfd_ns32k_arch target support.
2879 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2880 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2882 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2884 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2887 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2889 * h8300-dis.c, mips-dis.c: Don't use true and false.
2891 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2893 * configure.in: Change --with-targets to --enable-targets.
2895 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2897 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2898 opcodes to the first instruction with that opcode, to speed
2899 disassembly of large files. From ralphc@pyramid.com (Ralph
2902 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2904 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2906 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2908 * configure.bat: update to latest makefile.in
2910 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2912 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2913 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2914 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2915 slot insn is in a delay slot.
2916 * z8k-opc.h: (resflg): Fix patterns.
2917 * h8500-opc.h Fix CR insn patterns.
2919 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2921 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2922 "cmpl" before POWER versions, so that gas -many uses them.
2924 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2926 * disassemble.c: New file.
2927 * Makefile.in (OFILES): Add disassemble.o.
2928 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2929 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2930 binutils/configure.in.
2932 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2933 opcode being examined.
2935 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2937 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2938 (insert_ral, insert_ram, insert_ras): New functions.
2939 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2940 RAS for store with update.
2942 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2944 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2945 (edelsohn@npac.syr.edu).
2947 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2949 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2952 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2954 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2956 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2958 * ppc-opc.c (powerpc_operands): The signedp field has been
2959 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2960 instead. Add new operand SISIGNOPT.
2961 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2962 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2963 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2966 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2968 * i386-dis.c (struct private): Renamed to dis_private. `private'
2969 is a reserved word for dynix cc.
2971 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2973 * configure.in: Change error message to refer to bfd/config.bfd
2974 rather than bfd/configure.in.
2976 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2978 * ppc-opc.c: Define POWER2 as short alias flag.
2979 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2982 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2984 * i960-dis.c (print_insn_i960): Don't read a second word for
2985 opcodes 0, 1, 2 and 3.
2987 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2989 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2991 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2993 * m68881-ext.c: Removed; no longer used.
2994 * Makefile.in: Changed accordingly.
2996 * m68k-dis.c (ext_format_68881): Don't declare.
2997 (print_insn_m68k): If an instruction uses place 'i', it uses at
2998 least four fixed bytes.
2999 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3000 extended float, convert to double using floatformat_to_double, not
3001 ieee_extended_to_double, and fetch the data before converting it.
3003 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3005 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3006 davidj@ICSI.Berkeley.EDU (David Johnson).
3008 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3010 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3011 PowerPC uses bdnz[l][a].
3013 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3015 * dis-buf.c, i386-dis.c: Include sysdep.h.
3017 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3019 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3021 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3022 by Motorola PowerPC 601 with PPC_OPCODE_601.
3023 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3024 Disassemble Motorola PowerPC 601 instructions as well as normal
3025 PowerPC instructions.
3027 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3029 * i960-dis.c (reg, mem): Just use a static array instead of
3032 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3034 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3035 condition name index if this is for a negated condition.
3037 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3038 Floating point format for 'H' operand is backwards from normal
3039 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3040 operands (fmpyadd and fmpysub), handle bizarre register
3041 translation correctly for single precision format.
3043 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3044 or 'I' operands if the next format specifier is 'M' (fcmp
3045 condition completer).
3047 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3049 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3050 single number giving a bitmask for the MB and ME fields of an M
3051 form instruction. Change NB to accept 32, and turn it into 0;
3052 also turn 0 into 32 when disassembling. Seperated SH from NB.
3053 (insert_mbe, extract_mbe): New functions.
3054 (insert_nb, extract_nb): New functions.
3055 (SC_MASK): Mask out SA and LK bits.
3056 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3057 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3058 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3059 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3060 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3061 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3062 (powerpc_macros): Define table of macro definitions.
3063 (powerpc_num_macros): Define.
3065 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3066 if PPC_OPERAND_NEXT is set.
3068 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3070 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3071 char. Retrieve contents using bfd_getl32 instead of shifting.
3073 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3075 * ppc-opc.c: New file. Opcode table for PowerPC, including
3076 opcodes for POWER (RS/6000).
3077 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3078 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3079 (CFILES): Add ppc-dis.c.
3080 (ppc-dis.o, ppc-opc.o): New targets.
3081 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3083 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3085 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3086 No space before 'u', 'f', or 'N'.
3088 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3090 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3091 farther than we should.
3093 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3095 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3097 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3099 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3101 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3102 needs it, to prevent reading past the end of a section.
3104 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3106 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3107 Removed t,A case for la; always use t,A(b) case.
3109 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3111 From Ted Lemen <mellon@pepper.ncd.com>
3112 * mips-dis.c (print_insn_arg): Handle 'k'.
3113 * mips-opc.c: Make cache use k, not t.
3115 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3117 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3118 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3119 FLOAT_FORMAT_CODE to put out floating point register names.
3121 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3123 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3125 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3127 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3129 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3131 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3132 larger than 32. Moved dsxx32 variants first for disassembler.
3134 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3136 * z8kgen.c, z8k-opc.h: Add full lda information.
3138 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3140 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3141 movb instructions. Any necessary space will be emitted by
3142 the code to handle nullification completers.
3144 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3146 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3148 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3150 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3151 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3153 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3155 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3157 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3159 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3160 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3162 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3164 * m88k-dis.c (m88kdis): comment change. Remove space after
3166 (printop): handle new arg types DEC and XREG for m88110.
3168 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3170 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3171 type for absolute branch addresses. Delete special
3172 "ble" and "be" code in 'W' operand code.
3174 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3176 * mips-opc.c: Set hazard information correctly for branch
3177 likely instructions.
3179 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3181 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3182 info->fprintf_func for printing and info->print_address_func for
3185 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3187 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3189 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3191 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3192 Corrected second case of "b" for disassembler.
3194 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3196 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3197 to BFD swapping routines to correspond to BFD name changes.
3199 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3201 * mips-opc.c: Change div machine instruction to be z,s,t rather
3202 than s,t. Change div macro to be d,v,t rather than d,s,t.
3203 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3204 rem and remu which generates only the corresponding div
3205 instruction. This is for compatibility with the MIPS assembler,
3206 which only generates the simple machine instruction when an
3207 explicit destination of $0 is used.
3208 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3210 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3212 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3213 WR_31 hazard for bal, bgezal, bltzal.
3215 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3217 * hppa-dis.c (print_insn_hppa): Use print function
3218 from within the disassemble_info, not fprintf_filtered.
3220 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3222 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3223 Law, law@cs.utah.edu.)
3225 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3227 * mips-opc.c ("absu"): Removed.
3230 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3232 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3233 Changed hazard information to distinguish between memory load
3234 delays and coprocessor load delays.
3236 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3238 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3240 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3242 * configure.in: Don't pass cpu to config.bfd.
3244 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3246 * m88k-dis.c (m88kdis): Make class unsigned.
3248 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3250 * alpha-dis.c (print_insn_alpha): One branch format case was
3251 missing the instruction name.
3253 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3255 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3256 Add the arch-specific auxiliary files.
3257 (OFILES): Remove the arch-specific auxiliary files
3258 and use BFD_MACHINES instead of DIS_LIBS.
3259 * configure.in: Set BFD_MACHINES based on --with-targets option.
3261 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3263 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3266 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3268 * sparc-opc.c: Change CONST to const to deal with gcc
3269 -Dconst=__const -traditional.
3271 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3273 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3274 coprocessor instructions out of #if 0, and made them use new
3277 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3279 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3281 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3283 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3284 instruction, for use by the disassembler.
3286 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3287 hand-coded sign extensions that depended on 32-bit host ints.
3288 FIXME, we still depend on big-endian host bitfield ordering.
3289 (sparc_print_insn): Set the insn_info_valid field, and the
3290 other fields that describe the instruction being printed.
3292 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3294 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3295 `jmp' instead of just one of them.
3297 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3299 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3300 (fput_fp_reg_r): Renamed from fput_reg_r.
3301 (fput_fp_reg): New function.
3302 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3304 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3306 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3308 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3310 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3312 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3313 don't output a space.
3315 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3317 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3319 * mips-opc.c: New file, containing opcode table from
3320 ../include/opcode/mips.h.
3321 * Makefile.in: Add it.
3323 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3325 * m88k-dis.c: New file, moved in from gdb and changed to use the
3326 new dis-asm.h disassembler interface.
3327 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3328 (m88k-dis.o): New target.
3330 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3332 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3333 argument string const char * to correspond to opcode/mips.h.
3335 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3337 * mips-dis.c: Updated to account for name changes in new version
3339 * Makefile.in: Added header file dependencies.
3341 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3343 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3345 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3347 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3348 extend, rather than shifts.
3350 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3352 * Makefile.in: Undo 15 June change.
3354 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3356 * m68k-dis.c (print_insn_arg): Change return value to byte count
3358 * m68k-dis.c: Re-write to detect invalid operands before
3359 printing anything, so we can handle this the same way we
3360 handle invalid opcodes.
3362 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3364 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3366 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3368 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3371 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3373 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3375 * configure.in: Do make sysdep.h link.
3376 * Makefile.in: Search ../include. Don't search ../bfd.
3378 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3380 Changes from Jeff Law, law@cs.utah.edu:
3381 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3382 Do not print a space before the completers specified by
3385 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3387 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3388 defined, since gdb has been fixed.
3390 Changes from Jeff Law, law@cs.utah.edu:
3391 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3392 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3393 be a *disassemble_info, not a *FILE.
3394 * hppa-dis.c: Support 'd', '!', and 'a'.
3395 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3396 * hppa-dis.c: Delete cases which are no longer needed.
3398 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3400 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3402 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3404 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3407 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3409 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3410 * configure.in: No longer need to configure to get sysdep.h.
3412 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3414 * Patches from Jeffrey Law <law@cs.utah.edu>.
3415 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3416 templates for 1.1 FP computational instructions.
3418 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3420 * h8500-dis.c (print_insn_h8500): Address argument is type
3422 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3425 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3426 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3428 * sparc-dis.c (compare_opcodes): Move static declaration to
3431 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3433 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3434 instruction, remove unimp hack from 'l' argument.
3436 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3438 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3441 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3443 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3444 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3447 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3449 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3450 arrays of string pointers to 2-d arrays of chars, to save
3453 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3455 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3456 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3458 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3460 * hppa-dis.c: New file from Utah, adapted to new disassembler
3462 * Makefile.in: Include it.
3464 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3466 * sh-dis.c, sh-opc.h: New files.
3468 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3470 * alpha-dis.c, alpha-opc.h: New files.
3472 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3474 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3477 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3479 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3481 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3483 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3486 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3488 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3489 and double percent signs a few places.
3491 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3493 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3494 Use info->print_address_func not print_address.
3496 * dis-buf.c (generic_print_address): New function.
3498 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3500 * Makefile.in: Add sparc-dis.c.
3501 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3503 Add `add' instruction to the set that get checked
3504 for a preceding `sethi' in order to print an absolute address.
3505 * (print_insn): Disassembly prefers real instructions.
3506 (is_delayed_branch): Speed up.
3507 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3508 Still missing some float ops, and needs testing.
3509 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3510 F_ALIAS. Use printf, not fprintf, when not passing a file
3512 (compare_opcodes): Check that identical instructions have
3513 identical opcodes, complain otherwise.
3516 * Include reg_names.
3518 Use dis-asm.h/read_memory_func interface.
3520 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3522 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3523 deliberately return non-zero to setjmp from longjmp. Otherwise
3524 this code fails to compile.
3526 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3528 * m68k-dis.c: Fix prototype for fetch_arg().
3530 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3532 * dis-buf.c: New file, for new read_memory_func interface.
3533 Makefile.in (OFILES): Include it.
3534 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3535 Use new read_memory_func interface.
3537 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3539 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3540 * h8500-opc.h: Fix couple of opcodes.
3542 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3544 * Makefile.in: add dvi & installcheck targets
3546 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3548 * Makefile.in: Update for h8500-dis.c.
3550 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3552 * h8500-dis.c, h8500-opc.h: New files
3554 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3556 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3557 ../include/dis-asm.h.
3558 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3559 and ../gdb/m68k-pinsn.c).
3560 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3561 and ../gdb/i386-pinsn.c).
3562 * m68881-ext.c: New file. Moved definition of
3563 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3564 * Makefile.in: Adjust for new files.
3565 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3566 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3567 can be dis-assembled.
3569 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3571 * mips-dis.c (print_insn_arg): Now returns void.
3573 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3575 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3576 files that use the macros.
3578 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3580 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3581 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3582 (CFILES): Added mips-dis.c.
3584 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3586 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3587 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3589 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3591 * Makefile.in: Improve *clean rules.
3592 * configure.in: Allow a default host.
3594 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3596 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3597 files include other sysdep files
3599 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3601 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3603 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3605 * configure.in: For host support, use ../bfd/configure.host
3606 so it stays in sync with the ../bfd/hosts database.
3608 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3610 * configure.in: use cpu-vendor-os triple instead of nested cases
3612 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3614 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3615 *always* the wrong one.
3617 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3619 * z8kgen.c: added copyright info
3621 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3623 * z8k-dis.c (unparse_instr): prettier tabs
3624 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3626 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3628 * configure.in: Add ncr* configuration.
3629 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3630 picayune ANSI compilers happy.
3632 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3634 * configure.in (i386): Make i386 and i486 synonymous for now.
3635 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3637 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3639 * Makefile.in (install): Fix typo.
3641 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3643 * Makefile.in (make): Remove obsolete crud.
3644 (sparc-opc.o): Avoid Sun Make VPATH bug.
3646 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3648 * Makefile.in: since there are no SUBDIRS, remove rule and
3649 references of subdir_do.
3651 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3653 * Makefile.in (install): Get the library name right here too.
3654 Don't install bfd.h, since it's unrelated to this library. No
3655 subdirs to recurse into, either.
3656 (CFILES): The source file has a .c suffix, not .o.
3658 * sparc-opc.c: New file, moved from BFD.
3659 * Makefile.in (OFILES): Build it.
3661 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3663 * z8k-dis.c: fixed forward refferences of some declarations.
3665 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3667 * Makefile.in: get the name of the library right
3669 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3671 * z8k-dis.c: knows how to disassemble z8k stuff
3672 * z8k-opc.h: new file full of z8000 opcodes
3676 version-control: never