1 2001-11-14 Dave Brolley <brolley@redhat.com>
3 * m32r-dis.c: Regenerated.
4 * fr30-dis.c: Regenerated.
6 2001-11-14 Andreas Jaeger <aj@suse.de>
8 * i386-dis.c (print_insn): Use x86-64 as option.
10 2001-11-14 Alan Modra <amodra@bigpond.net.au>
12 * disassemble.c (disassembler): Call print_insn_i386.
13 * i386-dis.c (SUFFIX_ALWAYS): Define.
14 (struct dis_private): Add orig_sizeflag.
15 (print_insn_i386): Make it a wrapper, calling..
16 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
17 warning without using volatile by moving orig_sizeflag to priv,
18 and removing inbuf. Parse disassembler_options.
19 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
21 (putop): Remove #ifdef SUFFIX_ALWAYS.
23 2001-11-11 Timothy Wall <twall@alum.mit.edu>
25 * tic54x-dis.c: Use revised opcode structure. Export opcode
27 (has_lkaddr): Don't forget about Lmem insns.
28 * tic54x-opc.c: Add emulation trap. Parallel table now uses
29 standard opcode templates.
31 2001-11-13 Zack Weinberg <zack@codesourcery.com>
33 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
34 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
35 category instead of Ew.
37 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
39 * m68k-opc.c: Fix definitions of wddata[bwl].
41 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
43 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
44 fit in the buffer, try to match the empty keyword.
46 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
48 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
49 * fr30-ibld.c: Regenerate.
50 * m32r-ibld.c: Regenerate.
51 * openrisc-ibld.c: Regenerate.
53 2001-11-04 Chris Demetriou <cgd@broadcom.com>
55 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
57 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
59 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
60 * configure: Regernate.
65 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
67 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
70 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
72 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
74 * Makefile.in: Regenerate.
75 * mmix-dis.c, mmix-opc.c: New files.
77 2001-10-29 Kazu Hirata <kazu@hxi.com>
79 * d30v-dis.c: Fix a comment typo.
81 2001-10-23 Chris Demetriou <cgd@broadcom.com>
83 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
84 "bltzall" as writing GPR 31 (since they do).
86 * mips-dis.c (print_insn_arg): Calculate info->target
88 (print_insn_mips): Fill in instruction info.
89 (print_mips16_insn_arg): Remove unneded variable 'val'.
90 Removed duplicated instruction target calculations,
91 calculate once and print that result. Use same idiom for
92 masking the jump segment bits as is used in print_insn_arg.
94 2001-10-20 Alan Modra <amodra@bigpond.net.au>
96 * ppc-opc.c (CT): Make it an optional operand.
98 2001-10-17 Chris Demetriou <cgd@broadcom.com>
100 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
101 SB-1 binaries include instructions specific to the SB-1.
102 * mips-opc.c (SB1): New definition.
103 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
104 "recip.ps", "rsqrt.ps", and "sqrt.ps".
106 2001-10-17 matthew green <mrg@redhat.com>
108 * ppc-opc.c (STRM): New AltiVec operand.
109 (XDSS): New AltiVec instruction form.
110 (mtvscr): Correct operand list.
111 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
113 2001-10-17 Alan Modra <amodra@bigpond.net.au>
115 * po/POTFILES.in: Regenerate.
117 2001-10-13 matthew green <mrg@redhat.com>
119 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
120 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
121 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
123 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
125 * cgen-ibld.in: Include safe-ctype.h in preference to
127 * cgen-asm.in: Include safe-ctype.h in preference to
128 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
129 TOLOWER instead of tolower.
130 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
131 string elements in constructed regular expression.
132 * fr30-asm.c: Regenerate.
133 * fr30-desc.c: Regenerate.
134 * fr30-ibld.c: Regenerate.
135 * m32r-asm.c: Regenerate.
136 * m32r-desc.c: Regenerate.
137 * m32r-ibld.c: Regenerate.
138 * openrisc-asm.c: Regenerate.
139 * openrisc-desc.c: Regenerate.
140 * openrisc-ibld.c: Regenerate.
141 * po/opcodes.pot: Regenerate.
143 2001-10-12 matthew green <mrg@redhat.com>
145 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
146 instruction field instruction/extraction functions for new BookE
147 DE form instructions.
148 (CT): New macro for CT field in an X form instruction.
149 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
151 (PPC64): Don't include PPC_OPCODE_PPC.
152 (403): New opcode macro for PPC403 processors.
153 (BOOKE): New opcode macro for BookE processors.
154 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
155 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
156 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
157 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
158 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
159 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
160 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
161 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
162 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
163 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
164 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
165 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
166 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
167 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
169 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
170 for a disassembler option of `booke', `booke32' or `booke64' to enable
171 BookE support in the disassembler.
173 2001-10-12 John Healy <jhealy@redhat.com>
175 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
176 for the length when extracting the base part of the insn.
178 2001-10-09 Bruno Haible <haible@clisp.cons.org>
180 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
181 regular expression. Fix some formatting problems.
182 * fr30-asm.c: Regenerate.
183 * openrisc-asm.c: Regenerate.
184 * m32r-asm.c: Regenerate.
186 2001-10-09 Christian Groessler <cpg@aladdin.de>
188 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
189 of indirect register memory accesses to be same format the
192 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
194 * sh-opc.h: Fix encoding of least significant nibble of the
195 DSP single data transfer instructions.
197 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
200 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
202 * cgen-asm.in: Fix compile time warning messages in generated
204 * cgen-dis.in: The same.
205 * cgen-ibld.in: The same.
206 * fr30-asm.c: Regenerate.
207 * fr30-desc.c: Regenerate.
208 * fr30-dis.c: Regenerate.
209 * fr30-ibld.c: Regenerate.
210 * fr30-opc.c: Regenerate.
211 * m32r-asm.c: Regenerate.
212 * m32r-desc.c: Regenerate.
213 * m32r-dis.c: Regenerate.
214 * m32r-ibld.c: Regenerate.
215 * m32r-opc.c: Regenerate.
216 * m32r-opinst.c Regenerate.
217 * openrisc-asm.c: Regenerate.
218 * openrisc-desc.c: Regenerate.
219 * openrisc-dis.c: Regenerate.
220 * openrisc-ibld.c: Regenerate.
221 * openrisc-opc.c: Regenerate.
222 * openrisc-opc.h: Regenerate.
223 * Makefile.in: Regenerate.
224 * po/POTFILES.in: Regenerate.
225 * po/opcodes.pot: Regenerate.
227 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
229 * arm-opc.h (arm_opcodes): Add cirrus insns.
231 * arm-dis.c (print_insn_arm): Add 'I' case.
233 2001-10-03 Alan Modra <amodra@bigpond.net.au>
235 * po/POTFILES.in: Regenerate.
236 * configure: Regenerate.
238 2001-10-02 Alan Modra <amodra@bigpond.net.au>
240 * Makefile.am (Makefile): Depend on bfd/configure.in.
242 * Makefile.in: Regenerate.
244 2001-09-30 John Healy <jhealy@redhat.com>
246 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
247 calls to cgen_get_insn_value and cgen_put_insn_value calls.
248 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
250 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
252 * Makefile.am: Update dependencies with "make dep-am".
253 * Makefile.in: Regenerate.
255 2001-09-26 Alan Modra <amodra@bigpond.net.au>
257 * arc-dis.c: Formatting fixes.
258 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
260 2001-09-21 Bruno Haible <haible@clisp.cons.org>
262 * arc-dis.c: Don't include <ctype.h>.
263 * openrisc-desc.c: Likewise.
264 * openrisc-ibld.c: Likewise.
266 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
268 * fr30-opc.c: Fix compile time warning messages.
269 * i370-opc.c: Fix compile time warning messages.
270 * i960-dis.c: Fix compile time warning messages.
271 * m32r-asm.c: Fix compile time warning messages.
272 * m32r-desc.c: Fix compile time warning messages.
273 * m32r-dis.c: Fix compile time warning messages.
274 * m32r-ibld.c: Fix compile time warning messages.
275 * m32r-opc.c: Fix compile time warning messages.
276 * m32r-opinst.c: Fix compile time warning messages.
277 * ns32k-dis.c: Fix compile time warning messages.
278 * openrisc-asm.c: Fix compile time warning messages.
279 * openrisc-desc.c: Fix compile time warning messages.
280 * openrisc-dis.c: Fix compile time warning messages.
281 * openrisc-ibld.c: Fix compile time warning messages.
282 * openrisc-opc.c: Fix compile time warning messages.
283 * pdp11-dis.c: Fix compile time warning messages.
284 * tic54x-dis.c: Fix compile time warning messages.
285 * v850-opc.c: Fix compile time warning messages.
286 * vax-dis.c: Fix compile time warning messages.
287 * w65-opc.h: Fix compile time warning messages.
288 * z8k-opc.h: Fix compile time warning messages.
289 * z8kgen.c: Fix compile time warning messages.
291 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
293 * arm-dis.c: Fix compile time warning messages.
294 * cgen-asm.c: Fix compile time warning messages.
295 * cgen-dis.c: Fix compile time warning messages.
296 * cris-dis.c: Fix compile time warning messages.
297 * d10v-dis.c: Fix compile time warning messages.
298 * fr30-asm.c: Fix compile time warning messages.
299 * fr30-desc.c: Fix compile time warning messages.
300 * fr30-dis.c: Fix compile time warning messages.
301 * fr30-ibld.c: Fix compile time warning messages.
303 2001-09-18 Bruno Haible <haible@clisp.cons.org>
305 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
306 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
307 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
308 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
310 (cgen_keyword_add): Use ISALNUM instead of isalnum.
311 (hash_keyword_name): Use TOLOWER instead of tolower.
312 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
313 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
315 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
316 * fr30-desc.c: Don't include <ctype.h>.
317 * fr30-ibld.c: Likewise.
318 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
319 (load_insn_classes, parse_resource_users, load_depfile): Use
320 ISSPACE instead of isspace.
321 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
322 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
324 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
325 * m32r-desc.c: Don't include <ctype.h>.
326 * m32r-ibld.c: Likewise.
327 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
328 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
330 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
332 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
334 * Makefile.am: Add rules and dependencies to create the s/390 opcode
335 table out of s390-opc.txt automatically.
336 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
337 * s390-mkopc.c (dumpTable): Change output to create a complete file.
338 * s390-opc.c: New improved opcode format macros and remove the
339 pregenerated opcode table.
340 * s390-opc.txt: Adapt to new improved opcode format macros.
342 2001-09-14 David Schleef <ds@schleef.org>
344 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
346 2001-09-04 Alan Modra <amodra@bigpond.net.au>
348 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
349 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
351 2001-08-31 Eric Christopher <echristo@redhat.com>
352 Jason Eckhardt <jle@redhat.com>
354 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
355 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
358 2001-08-31 Andreas Jaeger <aj@suse.de>
360 * tic54x-opc.c: Add default initializers to avoid warnings.
362 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
363 * arc-ext.c: Likewise.
365 2001-08-28 matthew gren <mrg@redhat.com>
367 * ppc-opc.c (icbt): Order correctly.
369 2001-08-27 David Edelsohn <dje@watson.ibm.com>
370 Torbjorn Granlund <tege@swox.com>
372 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
374 (insert_ds): Complain if not a multiple of 4.
376 (XSYNC_MASK): Define.
377 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
378 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
380 2001-08-26 Andreas Jaeger <aj@suse.de>
382 * h8500-opc.h: Add default initializers to h8500_table to shut up
385 2001-08-25 Andreas Jaeger <aj@suse.de>
387 * tic54x-dis.c: Add unused attributes where needed.
389 * z8k-dis.c (output_instr): Add unused attribute.
391 * h8300-dis.c: Add missing prototypes.
392 (bfd_h8_disassemble): Make static.
394 * cris-dis.c: Add missing prototype.
395 * h8500-dis.c: Likewise.
396 * m68hc11-dis.c: Likewise.
397 * pj-dis.c: Likewise.
398 * tic54x-dis.c: Likewise.
399 * v850-dis.c: Likewise.
400 * vax-dis.c: Likewise.
401 * w65-dis.c: Likewise.
402 * z8k-dis.c: Likewise.
404 * d10v-dis.c: Add missing prototype.
405 (dis_long): Remove unused variable.
406 (dis_2_short): Likewise.
408 * sh-dis.c: Add missing prototypes.
409 * v850-opc.c: Likewise.
410 Add unused attributes where needed.
412 * ns32k-dis.c: Add missing prototypes.
413 (bit_extract_simple): Remove unused variable.
415 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
417 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
418 branch instructions for gcc 3.0.
419 * opcodes/s390-opc.txt: Likewise.
421 2001-08-21 Andreas Jaeger <aj@suse.de>
423 * i960-dis.c: Add parameters for prototypes
424 (ctrl): Add unused attributes.
428 * mips-dis.c: Add missing prototypes.
429 * a29k-dis.c: Likewise.
430 * arc-dis.c: Likewise.
431 * ia64-opc.c: Likewise.
433 * s390-dis.c: Add missing prototypes.
434 (init_disasm): Remove unused attribute since the parameter is
437 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
439 * mips-opc.c (M1): Define. Reformatted Code.
440 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
443 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
445 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
446 the corresponding non-likely insn is in MIPS I.
448 2001-08-13 Kazu Hirata <kazu@hxi.com>
450 * mcore-dis.c: Fix formatting.
451 * mips-dis.c: Likewise.
452 * pj-dis.c: Likewise.
453 * z8k-dis.c: Likewise.
455 2001-08-12 Richard Henderson <rth@redhat.com>
457 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
458 to *VALUEP. Regenerate all cgen files.
460 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
462 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
464 * mips-opc.c (G6): Undefine.
465 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
466 as the first "move" alternative.
468 2001-08-10 Andreas Jaeger <aj@suse.de>
470 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
472 * configure: Regenerate.
474 2001-08-10 Alan Modra <amodra@bigpond.net.au>
476 * ppc-opc.c: Revert 2001-08-08.
478 2001-08-09 Alan Modra <amodra@bigpond.net.au>
480 * dis-buf.c (generic_strcat_address): Add missing prototype.
481 #if 0 the functions as it is unused.
483 2001-08-08 Alan Modra <amodra@bigpond.net.au>
485 1999-10-25 Torbjorn Granlund <tege@swox.com>
486 * ppc-opc.c: Include "bfd.h".
487 (powerpc_operands): Add new field for reloc type.
489 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
491 * mips-dis.c (print_insn_arg): Don't use software integer registers
492 for coprocessor registers.
493 (get_mips_isa): Removed.
494 (is_newabi): New function, checks if NewABI is used.
495 (_print_insn_mips): Get distinction between old ABI and new ABI right.
497 2001-08-01 Christian Groessler <cpg@aladdin.de>
499 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
500 get stderr definition.
501 (internal, gas): Removed warnings.
502 (gas): Create a correct final entry for created array.
503 * z8k-opc.h: Recreated with new z8kgen.
505 2001-07-28 Kazu Hirata <kazu@hxi.com>
507 * i386-dis.c: Fix formatting.
509 2001-07-28 Matthias Kramm <kramm@quiss.org>
511 * i386-dis.c: Change formatting conventions for architecture
512 i386:intel to better match the format of various intel i386
513 assemblers, like nasm, tasm or masm.
515 2001-07-24 Alan Modra <amodra@bigpond.net.au>
517 * Makefile.am: Update dependencies with "make dep-am".
518 * Makefile.in: Regenerate
520 2001-07-24 Kazu Hirata <kazu@hxi.com>
522 * alpha-dis.c: Fix formatting.
523 * cris-dis.c: Likewise.
524 * d10v-dis.c: Likewise.
525 * d30v-dis.c: Likewise.
526 * m10300-dis.c: Likewise.
527 * tic54x-dis.c: Likewise.
529 2001-07-23 Kazu Hirata <kazu@hxi.com>
531 * m68k-dis.c: Fix formatting.
532 * pj-dis.c: Likewise.
533 * s390-dis.c: Likewise.
534 * z8k-dis.c: Likewise.
536 2001-07-21 Chris Demetriou <cgd@broadcom.com>
538 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
539 into the rest of the surrounding definitions.
541 2001-07-18 Alan Modra <amodra@bigpond.net.au>
543 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
544 for lgdt, lidt, sgdt, sidt.
546 2001-07-13 Philip Blundell <philb@gnu.org>
548 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
550 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
552 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
554 (@arch@_cgen_build_insn_regex): New routine from Graydon.
555 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
556 to verify if it is worth parsing the insn as insn "x". Also update
557 error message when insn is not a recognized format of the insn vs
558 when the insn is completely unrecognized.
560 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
562 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
564 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
565 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
567 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
569 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
570 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
571 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
573 2001-07-05 Ben Elliston <bje@redhat.com>
575 * Makefile.am (CPUDIR): Define.
576 (stamp-m32r): Update dependencies.
578 (stamp-openrisc): Ditto.
579 * Makefile.in: Regenerate.
581 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
583 * ppc-opc.c: Fix encoding of 'clf' instruction.
585 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
587 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
589 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
591 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
592 * cgen-opc.c (cgen_keyword_add): Ignore special first
593 character when building nonalpha_chars field.
595 2001-06-24 Ben Elliston <bje@redhat.com>
597 * m88k-dis.c: Format to conform to GNU coding standards.
599 2001-06-23 Andreas Jaeger <aj@suse.de>
601 * disassemble.c (disassembler_usage): Add unused attribute.
603 2001-06-22 Eric Christopher <echristo@redhat.com>
605 * mips-opc.c: Move prefx to start of the table.
607 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
609 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
612 2001-06-22 Pauli <pauli@moreton.com.au>
614 * m68k-opc.c: Add wdebug instruction.
616 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
618 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
620 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
622 * cgen-asm.c (cgen_parse_keyword): When looking for the
623 boundaries of a keyword, allow any special characters
624 that are actually in one of the allowed keyword.
625 * cgen-opc.c (cgen_keyword_add): Add any special characters
626 to the nonalpha_chars field.
628 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
630 * s390-opc.c: Add lgh instruction.
631 * s390-opc.txt: Likewise.
633 2001-06-11 Alan Modra <amodra@bigpond.net.au>
635 * i386-dis.c: Group function prototypes in one place.
636 (FLOATCODE): Redefine as 1.
637 (USE_GROUPS): Redefine as 2.
638 (USE_PREFIX_USER_TABLE): Redefine as 3.
639 (X86_64_SPECIAL): Define as 4.
640 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
641 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
642 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
643 (dis386): New table combining above four tables.
644 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
645 (dis386_twobyte): New table combining above two tables.
646 (x86_64_table): New table to handle x86_64.
648 (float_mem_att, float_mem_intel): Delet.
649 (float_mem): New table combining above two tables.
650 (print_insn_i386): Modify for above.
652 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
653 Return 0 on success, 1 if no valid alternative.
654 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
655 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
656 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
657 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
659 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
660 (OP_I64): If not 64-bit mode, call OP_I.
661 OP_OFF64): If not 64-bit mode, call OP_OFF.
662 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
663 'ignore'/'ignored' to 'bytemode'.
665 2001-06-10 Alan Modra <amodra@bigpond.net.au>
667 * configure.in: Sort 'ta' case statement.
668 * configure: Regenerate.
670 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
672 (disx86_64_att): Likewise.
673 (dis386_twobyte_att): Likewise.
674 (print_insn_i386): Don't print branch hints as a prefix.
675 (putop): 'H' macro prints branch hints.
676 (get64): Kill compile warnings.
678 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
680 * sh-opc.h (sh_table): Don't use empty initializers.
682 2001-06-06 Christian Groessler <cpg@aladdin.de>
684 * z8k-dis.c: Fix formatting.
685 (unpack_instr): Remove unused cases in switch statement. Add
686 safety abort() in default case.
687 (unparse_instr): Add safety abort() in default case.
689 2001-06-06 Peter Jakubek <pjak@snafu.de>
691 * m68k-dis.c (print_insn_m68k): Fix typo.
692 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
693 mcf (ColdFire) div, rem and moveb instructions.
695 2001-06-06 Alan Modra <amodra@bigpond.net.au>
697 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
698 (cond_jump_mode, loop_jcxz_mode): Define.
699 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
700 appropriate, and 'F' suffix to loop insns.
701 (disx86_64_att): Likewise.
702 (dis386_twobyte_att): Likewise.
703 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
704 Output data size prefix for long conditional jumps. Output cs and
706 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
707 (OP_J): Don't make PREFIX_DATA used.
709 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
711 * sh-opc.h (sh_table): Complete last element entry to avoid
714 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
716 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
718 2001-05-23 Alan Modra <amodra@one.net.au>
720 * arc-opc.c: Whitespace changes.
722 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
724 * cris-opc.c (cris_spec_regs): Add missing initializer field for
727 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
729 * cgen-dis.in (extract_normal): Complete support for min<base case.
731 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
733 * mips-dis.c (INSNLEN): Rename MAXLEN.
734 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
735 (print_insn_arg): Remove $ prefix of register names.
736 (set_mips_isa_type): Remove.
737 (mips_isa_type): New function.
738 (get_mips_isa): New Function.
739 (print_insn_mips): Rename _print_insn_mips.
740 (_print_insn_mips): New function, contains code which was
741 duplicated in print_insn_big_mips and print_insn_little_mips.
742 (print_insn_big_mips): Moved code to _print_insn_mips.
743 (print_insn_little_mips): Likewise.
744 (print_mips16_insn_arg): Remove $ prefix of register names.
745 Print error message before abort.
747 2001-05-14 J.T. Conklin <jtc@redback.com>
749 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
750 simplified mnemonics used for setting PPC750-specific special
753 2001-05-12 H.J. Lu <hjl@gnu.org>
755 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
758 2001-05-12 Peter Targett <peter.targett@arccores.com>
760 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
761 register to r/w. Formatting fixes throughout file.
763 2001-05-12 Alan Modra <amodra@one.net.au>
765 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
767 (twobyte_has_modrm): Update table.
768 (need_modrm): Give it file scope.
769 (MODRM_CHECK): Define.
770 (dofloat): Use MODRM_CHECK.
775 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
777 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
778 even at end of a section.
779 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
780 by ignoring precariously-unpacked insn_value in favor of raw buffer.
782 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
784 * disassemble.c (disassembler_usage): Remove unused attribute.
786 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
788 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
790 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
792 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
793 assume incoming buffer already has the base insn loaded. Handle
794 smaller-than-base instructions for variable-length case.
796 2001-05-04 Alan Modra <amodra@one.net.au>
798 * i386-dis.c (Ev, Ed): Remove duplicate define.
801 (OP_XS): New function.
802 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
804 (dis386_twobyte_intel): Likewise.
805 (prefix_user_table): Use MS for maskmovq operand.
807 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
809 * Makefile.am: Add OpenRISC target.
810 * Makefile.in: Regenerated.
812 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
814 * configure.in (bfd_openrisc_arch): Add target.
815 * configure: Regenerated.
817 * openrisc-asm.c: New file.
818 * openrisc-desc.c: Likewise.
819 * openrisc-desc.h: Likewise.
820 * openrisc-dis.c: Likewise.
821 * openrisc-ibld.c: Likewise.
822 * openrisc-opc.c: Likewise.
823 * openrisc-opc.h: Likewise.
825 2001-04-24 Christian Groessler <cpg@aladdin.de>
827 * z8k-dis.c: add names of control registers (ctrl_names);
828 (seg_length): provides instruction length fixup for segmented
829 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
830 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
831 (unparse_intr): handle CLASS_PR, print addresses without '#'
832 * z8k-opc.h: re-created with new z8kgen
833 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
834 entries for ldctl/ldctlb instruction
836 2001-04-06 Andreas Jaeger <aj@suse.de>
838 * i386-dis.c: Add ffreep instruction.
840 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
842 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
844 2001-03-24 Alan Modra <alan@linuxcare.com.au>
846 * i386-dis.c (PREGRP25): Define.
847 (dis386_twobyte_att): Use here in place of "movntq" entry.
848 (dis386_twobyte_intel): Likewise.
849 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
851 (dis386_twobyte_att): Use here.
852 (dis386_twobyte_intel): Likewise.
853 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
854 (prefix_user_table <maskmovdqu>): XM operand, not MX.
855 (prefix_user_table): Cosmetic changes to "bad" entries.
857 2001-03-23 Nick Clifton <nickc@redhat.com>
859 * mips-opc.c: Remove extraneous whitespace.
860 * mips-dis.c: Remove extraneous whitespace.
862 2001-03-22 Ben Elliston <bje@redhat.com>
864 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
865 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
866 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
867 to allay a compiler warning.
869 2001-03-22 Alan Modra <alan@linuxcare.com.au>
871 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
872 (dis386_twobyte_intel): Likewise.
873 (twobyte_has_modrm): Set entry for paddq, psubq.
875 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
877 * cgen-dis.in (print_insn_@arch@): Add support for target machine
878 determination via CGEN_COMPUTE_MACH.
879 * fr30-desc.c: Regenerate.
880 * fr30-dis.c: Regenerate.
881 * fr30-opc.h: Regenerate.
882 * m32r-desc.c: Regenerate.
883 * m32r-dis.c: Regenerate.
884 * m32r-opc.h: Regenerate.
885 * m32r-opinst.c: Regenerate.
887 2001-03-20 H.J. Lu <hjl@gnu.org>
889 * configure.in: Remove the redundent AC_ARG_PROGRAM.
890 * configure: Rebuild.
892 2001-03-19 Jim Wilson <wilson@redhat.com>
894 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
895 notestr if larger than xsect.
896 (in_class): Handle format M5.
897 * ia64-asmtab.c: Regnerate.
899 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
901 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
902 has more than one byte left to read.
904 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
906 * s390-opc.c: Add new opcodes. Smooth out formatting.
907 * s390-opc.txt: Add new opcodes.
909 2001-03-06 Nick Clifton <nickc@redhat.com>
911 * arm-dis.c (print_insn_thumb): Compute destination address
912 of BLX(1) instruction by taking bit 1 from PC and not from bit
915 2001-03-06 Igor Shevlyakov <igor@windriver.com>
917 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
918 so command line switches will work.
920 2001-03-05 Dave Brolley <brolley@redhat.com>
922 * fr30-asm.c: Regenerate.
923 * fr30-desc.c: Regenerate.
924 * fr30-desc.h: Regenerate.
925 * fr30-dis.c: Regenerate.
926 * fr30-ibld.c: Regenerate.
927 * fr30-opc.c: Regenerate.
928 * fr30-opc.h: Regenerate.
929 * m32r-asm.c: Regenerate.
930 * m32r-desc.c: Regenerate.
931 * m32r-desc.h: Regenerate.
932 * m32r-dis.c: Regenerate.
933 * m32r-ibld.c: Regenerate.
934 * m32r-opc.c: Regenerate.
935 * m32r-opc.h: Regenerate.
936 * m32r-opinst.c: Regenerate.
938 2001-02-28 Igor Shevlyakov <igor@windriver.com>
940 * m68k-opc.c: fix cpushl according to Motorola. Enable
941 bunch of instructions for Coldfire 5407 and add all new.
943 2001-02-27 Alan Modra <alan@linuxcare.com.au>
945 * configure.in (BFD_VERSION): Do without grep.
946 * configure: Regenerate.
947 * Makefile.am: Run "make dep-am".
948 * Makefile.in: Regenerate.
950 2001-02-23 David Mosberger <davidm@hpl.hp.com>
952 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
953 * ia64-asmtab.c: Regenerate.
955 2001-02-21 David Mosberger <davidm@hpl.hp.com>
957 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
958 separate variants: one for IMM22 and the other for IMM14.
959 * ia64-asmtab.c: Regenerate.
961 2001-02-21 Greg McGary <greg@mcgary.org>
963 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
965 2001-02-20 H.J. Lu <hjl@gnu.org>
967 * Makefile.am (ia64-ic.tbl): Remove the target.
968 (ia64-raw.tbl): Likewise.
969 (ia64-waw.tbl): Likewise.
970 (ia64-war.tbl): Likewise.
971 (ia64-asmtab.c): Generate it in the source directory.
972 * Makefile.in: Regenerated.
974 2001-02-18 lars brinkhoff <lars@nocrew.org>
976 * Makefile.am: Add PDP-11 target.
977 * configure.in: Likewise.
978 * disassemble.c: Likewise.
979 * pdp11-dis.c: New file.
980 * pdp11-opc.c: New file.
982 2001-02-14 Jim Wilson <wilson@redhat.com>
984 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
985 * ia64-asmtab.c: Regenerate.
987 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
989 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
993 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
995 * mips-dis.c (print_insn_arg): Use top four bits of the address of
996 the following instruction not of the jump itself for the jump
998 (print_mips16_insn_arg): Likewise.
1000 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1002 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1004 * Makefile.in: Regenerate.
1006 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1008 * Makefile.am: Add linux target for S/390.
1009 * Makefile.in: Likewise.
1010 * configure.in: Likewise.
1011 * disassemble.c: Likewise.
1012 * s390-dis.c: New file.
1013 * s390-mkopc.c: New file.
1014 * s390-opc.c: New file.
1015 * s390-opc.txt: New file.
1017 2001-02-05 Jim Wilson <wilson@redhat.com>
1019 * ia64-asmtab.c: Revert 2000-12-16 change.
1021 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1023 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1024 * m32r-desc.h: Regenerate.
1026 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1028 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1029 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1031 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1033 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1035 2001-01-13 Nick Clifton <nickc@redhat.com>
1037 * disassemble.c: Remove spurious white space.
1039 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1041 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1044 2001-01-11 Peter Targett <peter.targett@arccores.com>
1046 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1047 * Makefile.am (C_FILES): Add arc-ext.c.
1048 (ALL_MACHINES) Add arc-ext.lo.
1049 (INCLUDES) Add opcode directory to list.
1050 New dependency entry for arc-ext.lo.
1051 * disassemble.c (disassembler): Correct call to
1052 arc_get_disassembler.
1053 * arc-opc.c: New update for ARC, including full base
1054 instructions for ARC variants.
1055 * arc-dis.h, arc-dis.c: New update for ARC, including
1056 extensibility functionality.
1057 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1059 2001-01-10 Jan Hubicka <jh@suse.cz>
1061 * i386-dis.c (PREGRP15 - PREGRP24): New.
1062 (dis386_twobyt): Add SSE2 instructions.
1063 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1064 (twobyte_uses_f3_prefix): ... this one.
1065 (grps): Add SSE instructions.
1066 (prefix_user_table): Add two new slots; add SSE2 instructions.
1067 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1068 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1069 to prefix_user_table.
1070 (OP_E): Accept mfence and lfence as well.
1071 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1072 (OP_XMM): Support REX extensions.
1076 2001-01-09 Nick Clifton <nickc@redhat.com>
1078 * arm-dis.c (print_insn): Set pc to zero for instructions with
1079 a reloc associated with them.
1081 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1083 * cgen-asm.in (parse_insn_normal): Changed syn to be
1084 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1085 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1086 to '\0' to use 0 instead.
1087 * cgen-dis.in (print_insn_normal): Ditto.
1088 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1090 2001-01-05 Jan Hubicka <jh@suse.cz>
1092 * i386-dis.c: Add x86_64 support.
1093 (rex): New static variable.
1094 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1095 (USED_REX): New macro.
1096 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1097 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1098 (OP_REG, OP_OFF): Declare.
1099 (get64, get32, get32s): New functions.
1100 (r??_reg): New constants.
1101 (dis386_att): Change templates of instruction implicitly promoted
1102 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1104 (dis386_intel): Likewise.
1105 (dixx86_64_att): New table based on dis386_att.
1106 (dixx86_64_intel): New table based on dis386_intel.
1107 (names64, names8rex): New global variable.
1108 (names32, names16): Add extended registers.
1109 (prefix_user_t): Recognize rex prefixes.
1110 (prefix_name): Print REX prefixes nicely.
1111 (op_riprel): New global variable.
1112 (start_pc): Set type to bfd_vma.
1113 (print_insn_i386): Detect the 64bit mode and use proper table;
1114 move ckprefix after initializing the buffer; output unused rex prefixes;
1115 output information about target of RIP relative addresses.
1116 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1117 (print_operand_value): New function.
1118 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1119 REX prefix and new modes.
1120 (get64, get32s): New.
1121 (get32): Return bfd_signed_vma type.
1122 (set_op): Initialize the op_riprel.
1123 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1125 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1127 cgen-dis.in (read_insn): Use bfd_get_bits()
1129 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1131 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1132 (hash_insn_list): Likewise
1133 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1134 (extract_1): Use bfd_get_bits().
1135 (extract_normal): Apply sign extension to both extraction
1137 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1138 (cgen_put_insn_value): Use bfd_put_bits()
1140 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1142 * cgen-asm.in (parse_insn_normal): Print better error message for
1143 instructions with missing operands.
1145 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1147 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1149 2000-12-16 Nick Clifton <nickc@redhat.com>
1151 * Makefile.in: Regenerate.
1152 * aclocal.m4: Regenerate.
1153 * config.in: Regenerate.
1154 * configure.in: Add spacing.
1155 * configure: Regenerate.
1156 * ia64-asmtab.c: Regenerate.
1157 * po/opcodes.pot: Regenerate.
1159 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1161 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1162 error messages over later parse-time ones.
1164 2000-12-12 Jim Wilson <wilson@redhat.com>
1166 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1168 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1169 (print_dependency_table): Print NULL if semantics field not set.
1170 (insert_opcode_dependencies): Mark cmp parameter as unused.
1171 (print_main_table): Use fprintf_vma to print long long fields.
1172 (main): Mark argv paramter as unused. Convert to old style definition.
1173 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1174 * ia64-asmtab.c: Regnerate.
1176 2000-12-09 Nick Clifton <nickc@redhat.com>
1178 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1181 * fr30-dis.c: Regenerate.
1183 2000-12-08 Peter Targett <peter.targett@arccores.com>
1185 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1186 * Makefile.am (C_FILES): Add arc-ext.c.
1187 (ALL_MACHINES) Add arc-ext.lo.
1188 (INCLUDES) Add opcode directory to list.
1189 New dependency entry for arc-ext.lo.
1190 * disassemble.c (disassembler): Correct call to
1191 arc_get_disassembler.
1192 * arc-opc.c: New update for ARC, including full base
1193 instructions for ARC variants.
1194 * arc-dis.h, arc-dis.c: New update for ARC, including
1195 extensibility functionality.
1196 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1198 2000-12-03 Chris Demetriou cgd@sibyte.com
1200 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1201 MOD_HILO, and MOD_LO macros.
1203 * mips-opc.c (M1, M2): Delete.
1204 (mips_builtin_opcodes): Remove all uses of M1.
1206 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1207 instructions take "G" format second operands and use the
1209 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1211 Delete "sel" code operands from mfc1 and mtc1.
1212 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1215 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1216 Chris Demetriou cgd@sibyte.com
1218 * mips-opc.c (mips_builtin_opcodes): Finish additions
1219 for MIPS32 support, and clean up existing entries for
1220 aesthetics, consistency with the MIPS32 ISA, and
1221 with consistency the rest of the table.
1223 2000-12-01 Nick Clifton <nickc@redhat.com>
1225 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1228 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1230 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1231 specifiers. Update 'B' for new constant names, and remove
1233 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1234 near the top of the array, so they are disassembled properly.
1235 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1236 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1237 specifier. Add 'H' format specifier variants for "mfc1,"
1238 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1239 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1240 "wait" variant which uses 'J' operand specifier.
1242 * mips-dis.c (set_mips_isa_type): Update to use
1243 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1244 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1245 * mips-opc.c (I32): New constant for instructions added in
1248 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1250 * mips-dis.c (set_mips_isa_type): Add cases for
1251 bfd_mach_mips5 and bfd_mach_mips64.
1252 * mips-opc.c (I64): New definitions.
1254 * mips-dis.c (set_mips_isa_type): Add case for
1257 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1259 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1260 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1261 Initialize variable dc to NULL.
1262 (print_insn_shx): Remove unused label d_reg_n.
1264 2000-11-24 Nick Clifton <nickc@redhat.com>
1266 * arm-opc.h: Add new opcode formatting parameter 'B'.
1267 (arm_opcodes): Add XScale, v5, and v5te instructions.
1268 (thumb_opcodes): Add v5t instructions.
1270 * arm-dis.c (print_insn_arm): Handle new 'B' format
1272 (print_insn_thumb): Decode BLX(1) instruction.
1274 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1276 * mips-opc.c: Fix file header comment.
1278 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1280 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1281 print_insn_cris_with_register_prefix.
1283 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1285 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1287 2000-11-07 Matthew Green <mrg@redhat.com>
1289 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1290 must be loaded there in their entirety.
1292 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1294 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1295 (compute_arch_mask): Add v8plusb and v9b machines.
1296 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1297 * sparc-opc.c: Support for Cheetah instruction set.
1298 (prefetch_table): Add #invalidate.
1300 2000-10-16 Nick Clifton <nickc@redhat.com>
1302 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1304 2000-10-06 Dave Brolley <brolley@redhat.com>
1306 * fr30-desc.h: Regenerate.
1307 * m32r-desc.h: Regenerate.
1308 * m32r-ibld.c: Regenerate.
1310 2000-10-05 Jim Wilson <wilson@redhat.com>
1312 * ia64-ic.tbl: Update from Intel.
1313 * ia64-asmtab.c: Regenerate.
1315 2000-10-04 Kazu Hirata <kazu@hxi.com>
1317 * ia64-gen.c: Convert C++-style comments to C-style comments.
1318 * tic54x-dis.c: Likewise.
1320 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1322 Changes to add dollar prefix to registers for files where user symbols
1323 don't have a leading underscore. Fix formatting.
1324 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1325 (format_reg): Add parameter with_reg_prefix. All callers changed.
1326 (print_with_operands): Ditto.
1327 (print_insn_cris_generic): Renamed from print_insn_cris, add
1328 parameter with_reg_prefix.
1329 (print_insn_cris_with_register_prefix,
1330 print_insn_cris_without_register_prefix, cris_get_disassembler):
1332 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1334 2000-09-22 Jim Wilson <wilson@redhat.com>
1336 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1337 gt, ge, ngt, and nge.
1338 * ia64-asmtab.c: Regenerate.
1340 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1341 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1342 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1343 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1344 * ia64-asmtab.c: Regnerate.
1346 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1348 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1349 Add mfc0 and mtc0 with sub-selection values.
1350 Add clo and clz opcodes.
1351 Add msub and msubu instructions for MIPS32.
1352 Add madd/maddu aliases for mad/madu for MIPS32.
1353 Support wait, deret, eret, movn, pref for MIPS32.
1354 Support tlbp, tlbr, tlbwi, tlbwr.
1357 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1358 (print_insn_arg): Handle 'H' args.
1359 (set_mips_isa_type): Recognize 4K.
1360 Use CPU_* defines instead of hardcoded numbers.
1362 2000-09-11 Catherine Moore <clm@redhat.com>
1364 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1365 (d30v_format_tab): Use Rb2 for modinc and moddec.
1367 2000-09-07 Catherine Moore <clm@redhat.com>
1369 * d30v-opc.c (d30v_format_tab): Use format Ra for
1372 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1374 * configure: Rebuilt with new libtool.m4.
1376 2000-09-05 Nick Clifton <nickc@redhat.com>
1378 * configure: Regenerate.
1379 * po/opcodes.pot: Regenerate.
1381 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1383 * acinclude.m4: Include libtool and gettext macros from the
1385 * aclocal.m4, configure: Rebuilt.
1387 2000-08-30 Kazu Hirata <kazu@hxi.com>
1389 * tic80-dis.c: Fix formatting.
1391 2000-08-29 Kazu Hirata <kazu@hxi.com>
1393 * w65-dis.c: Fix formatting.
1395 2000-08-28 Mark Hatle <mhatle@mvista.com>
1397 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1398 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1399 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1400 instructions. Added extended mnemonic mftbl as defined in the
1401 405GP manual for all PPCs.
1403 2000-08-28 Jim Wilson <wilson@redhat.com>
1405 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1406 call. Change last goto to use failed instead of done.
1408 2000-08-28 Dave Brolley <brolley@redhat.com>
1410 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1411 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1412 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1413 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1414 * cgen-dis.in (read_insn): New static function.
1415 (print_insn): Use read_insn to read the insn into the buffer and set
1417 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1419 * fr30-asm.c: Regenerated.
1420 * fr30-desc.c: Regenerated.
1421 * fr30-desc.h: Regenerated.
1422 * fr30-dis.c: Regenerated.
1423 * fr30-ibld.c: Regenerated.
1424 * fr30-opc.c: Regenerated.
1425 * fr30-opc.h: Regenerated.
1426 * m32r-asm.c: Regenerated.
1427 * m32r-desc.c: Regenerated.
1428 * m32r-desc.h: Regenerated.
1429 * m32r-dis.c: Regenerated.
1430 * m32r-ibld.c: Regenerated.
1431 * m32r-opc.c: Regenerated.
1433 2000-08-28 Kazu Hirata <kazu@hxi.com>
1435 * tic30-dis.c: Fix formatting.
1437 2000-08-27 Kazu Hirata <kazu@hxi.com>
1439 * sh-dis.c: Fix formatting.
1441 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1443 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1445 2000-08-24 Kazu Hirata <kazu@hxi.com>
1447 * z8k-dis.c: Fix formatting.
1449 2000-08-16 Jim Wilson <wilson@redhat.com>
1451 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1452 break, mov-immediate, nop.
1453 * ia64-opc-f.c: Delete fpsub instructions.
1454 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1455 address operand. Rewrite using macros to avoid long lines.
1456 * ia64-opc.h (POSTINC): Define.
1457 * ia64-asmtab.c: Regenerate.
1459 2000-08-15 Jim Wilson <wilson@redhat.com>
1461 * ia64-ic.tbl: Add missing entries.
1463 2000-08-08 Jason Eckhardt <jle@redhat.com>
1465 * i860-dis.c (print_br_address): Change third argument from int
1468 2000-08-07 Richard Henderson <rth@redhat.com>
1470 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1471 for MLI templates. Handle IA64_OPND_TGT64.
1473 2000-08-04 Ben Elliston <bje@redhat.com>
1475 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1476 * cgen.sh: Likewise.
1478 2000-08-02 Jim Wilson <wilson@redhat.com>
1480 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1482 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1484 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1485 Change return type from void to int. Check the combination
1486 of operands, return 1 if valid. Fix to avoid BUF overflow.
1487 Report undefined combinations of operands in COMMENT.
1488 Report internal errors to stderr. Output the adiw/sbiw
1489 constant operand in both decimal and hex.
1490 (print_insn_avr): Disassemble ldd/std with displacement of 0
1491 as ld/st. Check avr_operand () return value, handle invalid
1492 combinations of operands like unknown opcodes.
1494 2000-07-28 Ben Elliston <bje@redhat.com>
1496 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1497 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1498 * Makefile.in: Regenerate.
1499 * configure.in: Add --enable-cgen-maint option.
1500 * configure: Regenerate.
1502 2000-07-26 Dave Brolley <brolley@redhat.com>
1504 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1505 (cgen_hw_lookup_by_num): Ditto.
1506 (cgen_operand_lookup_by_name): Ditto.
1507 (print_address): Ditto.
1508 (print_keyword): Ditto.
1509 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1511 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1513 (cgen_parse_keyword): Ditto.
1515 2000-07-22 Jason Eckhardt <jle@redhat.com>
1517 * i860-dis.c: New file.
1518 (print_insn_i860): New function.
1519 (print_br_address): New function.
1520 (sign_extend): New function.
1521 (BITWISE_OP): New macro.
1522 (I860_REG_PREFIX): New macro.
1523 (grnames, frnames, crnames): New structures.
1525 * disassemble.c (ARCH_i860): Define.
1526 (disassembler): Add check for bfd_arch_i860 to set disassemble
1527 function to print_insn_i860.
1529 * Makefile.in (CFILES): Added i860-dis.c.
1530 (ALL_MACHINES): Added i860-dis.lo.
1531 (i860-dis.lo): New dependences.
1533 * configure.in: New bits for bfd_i860_arch.
1535 * configure: Regenerated.
1537 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1539 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1540 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1541 (cris-dis.lo, cris-opc.lo): New rules.
1542 * Makefile.in: Rebuild.
1543 * configure.in (bfd_cris_arch): New target.
1544 * configure: Rebuild.
1545 * disassemble.c (ARCH_cris): Define.
1546 (disassembler): Support ARCH_cris.
1547 * cris-dis.c, cris-opc.c: New files.
1548 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1550 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1552 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1553 Reported by Bill Clarke <llib@computer.org>.
1555 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1557 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1558 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1560 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1562 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1563 fput_const, extract_3, extract_5_load, extract_5_store,
1564 extract_5r_store, extract_5R_store, extract_10U_store,
1565 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1566 extract_12, extract_17, extract_22): Prototype.
1567 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1568 shadowing outer block.
1571 2000-07-05 DJ Delorie <dj@redhat.com>
1575 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1577 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1579 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1581 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1582 marked for translation (exception from the usual coding style).
1583 (print_insn_avr): Initialize insn2 to avoid warnings.
1585 2000-07-03 Kazu Hirata <kazu@hxi.com>
1587 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1588 * h8500-dis.c: Fix formatting.
1590 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1592 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1593 (CLEANFILES): Add DEPA.
1594 * Makefile.in: Regenerate.
1596 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1598 * arm-dis.c (regnames): Add an additional register set to match
1599 the set used by GCC. Make it the default.
1601 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1603 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1605 * Makefile.in: Regenerate.
1607 2000-06-20 H.J. Lu <hjl@gnu.org>
1609 * Makefile.am: Rebuild dependency.
1610 * Makefile.in: Rebuild.
1612 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1614 * Makefile.in, configure: regenerate
1615 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1617 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1619 * configure.in: Recognize m68hc12 and m68hc11.
1620 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1621 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1622 and opcode generation for m68hc11 and m68hc12.
1624 2000-06-16 Nick Duffek <nsd@redhat.com>
1626 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1627 bfd_mach_ppc_620 instead of 620.
1629 2000-06-12 Kazu Hirata <kazu@hxi.com>
1631 * h8300-dis.c: Fix formatting.
1632 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1635 2000-06-09 Denis Chertykov <denisc@overta.ru>
1637 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1639 2000-06-07 Denis Chertykov <denisc@overta.ru>
1641 * avr-dis.c: completely rewritten.
1643 2000-06-02 Kazu Hirata <kazu@hxi.com>
1645 * h8300-dis.c: Follow the GNU coding style.
1646 (bfd_h8_disassemble) Fix a typo.
1648 2000-06-01 Kazu Hirata <kazu@hxi.com>
1650 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1651 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1652 correctly. Fix a typo.
1654 2000-05-31 Nick Clifton <nickc@redhat.com>
1656 * opintl.h (_(String)): Explain why dgettext is used instead of
1659 2000-05-30 Nick Clifton <nickc@redhat.com>
1661 * opintl.h (gettext, dgettext, dcgettext, textdomain,
1662 bindtextdomain): Replace defines with those from intl/libgettext.h
1663 to quieten gcc warnings.
1665 2000-05-26 Alan Modra <alan@linuxcare.com.au>
1667 * Makefile.am: Update dependencies with "make dep-am"
1668 * Makefile.in: Regenerate.
1670 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
1672 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1673 sign-extending operands.
1675 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
1677 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1680 2000-05-21 Nick Clifton <nickc@redhat.com>
1682 * Makefile.am (LIBIBERTY): Define.
1684 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1686 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1687 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1688 (reg_names): Rename to std_reg_names. Change it to a char **
1690 (std_reg_names): New name for reg_names.
1691 (set_mips_isa_type): Set reg_names to point to std_reg_names by
1694 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
1696 * fr30-desc.h: Partially regenerated to account for changed
1697 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1698 * m32r-desc.h: Ditto.
1700 2000-05-15 Nick Clifton <nickc@redhat.com>
1702 * arm-opc.h: Use upper case for flasg in MSR and MRS
1703 instructions. Allow any bit to be set in the field_mask of
1704 the MSR instruction.
1706 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1707 field_mask of an MSR instruction.
1709 2000-05-11 Thomas de Lellis <tdel@windriver.com>
1711 * arm-opc.h: Disassembly of thumb ldsb/ldsh
1712 instructions changed to ldrsb/ldrsh.
1714 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
1716 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1717 target addresses for 'jal' and 'j'.
1719 2000-05-10 Geoff Keating <geoffk@redhat.com>
1721 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1722 also available in common mode when powerpc syntax is being used.
1724 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1726 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1727 (dummy_print_address): Ditto.
1729 2000-05-04 Timothy Wall <twall@redhat.com>
1731 * tic54x-opc.c: New.
1732 * tic54x-dis.c: New.
1733 * disassemble.c (disassembler): Add ARCH_tic54x.
1734 * configure.in: Added tic54x target.
1736 * Makefile.am: Add tic54x dependencies.
1737 * Makefile.in: Ditto.
1739 2000-05-03 J.T. Conklin <jtc@redback.com>
1741 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1742 vector unit operands.
1743 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1744 unit instruction formats.
1745 (PPCVEC): New macro, mask for vector instructions.
1746 (powerpc_operands): Add table entries for above operand types.
1747 (powerpc_opcodes): Add table entries for vector instructions.
1749 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1750 (print_insn_little_powerpc): Likewise.
1751 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1753 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1755 * configure.in: Add bfd_powerpc_64_arch.
1756 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1759 2000-04-24 Nick Clifton <nickc@redhat.com>
1761 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1764 2000-04-23 Denis Chertykov <denisc@overta.ru>
1766 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1768 (reg_fmul_r): New. Extract source register from FMUL instruction.
1769 (reg_muls_d): New. Extract destination register from MULS instruction.
1770 (reg_muls_r): New. Extract source register from MULS instruction.
1771 (reg_movw_d): New. Extract destination register from MOVW instruction.
1772 (reg_movw_r): New. Extract source register from MOVW instruction.
1773 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1774 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1776 2000-04-22 Timothy Wall <twall@redhat.com>
1778 * ia64-gen.c (general): Add an ordered table of primary
1779 opcode names, as well as priority fields to disassembly data
1780 structures to enforce a preferred disassembly format based on the
1781 ordering of the opcode tables.
1782 (load_insn_classes): Show a useful message if IC tables are missing.
1783 (load_depfile): Ditto.
1784 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1785 distinguish preferred disassembly.
1786 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1787 format. Fix incorrect flag on fma.s/fma.s.s0.
1788 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1789 the highest priority.
1790 * ia64-opc-b.c: Use more abbreviations.
1791 * ia64-asmtab.c: Regenerate.
1793 2000-04-21 Jason Eckhardt <jle@redhat.com>
1795 * hppa-dis.c (extract_16): New function.
1796 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1797 new operand types l,y,&,fe,fE,fx.
1799 2000-04-21 Richard Henderson <rth@redhat.com>
1800 David Mosberger <davidm@hpl.hp.com>
1801 Timothy Wall <twall@redhat.com>
1802 Bob Manson <manson@charmed.cygnus.com>
1803 Jim Wilson <wilson@redhat.com>
1805 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1806 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1807 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1809 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1810 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1811 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1812 * Makefile.in: Rebuild.
1813 * configure Rebuild.
1814 * configure.in (bfd_ia64_arch): New target.
1815 * disassemble.c (ARCH_ia64): Define.
1816 (disassembler): Support ARCH_ia64.
1817 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1818 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1819 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1820 ia64-war.tbl, ia64-waw.tbl: New files.
1822 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1824 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1825 (disassemble): Use them.
1827 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1829 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1830 * Makefile.am: Update dependencies.
1831 * Makefile.in: Regenerate.
1833 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1835 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1836 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1837 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1838 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1839 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1840 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1841 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1842 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1843 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1844 ansidecl.h as sysdep.h includes it.
1846 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1848 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1849 --enable-build-warnings option.
1850 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1851 * Makefile.in, configure: Re-generate.
1853 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1855 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1856 stc GBR,@-<REG_N> is available for arch_sh1_up.
1857 Group parallel processing insn with identical mnemonics together.
1858 Make three-operand psha / pshl come first.
1860 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1862 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1863 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1864 (sh_arg_type): Add A_PC.
1865 (sh_table): Update entries using immediates. Add repeat.
1866 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1867 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1869 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1871 * po/opcodes.pot: Regenerate.
1873 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1874 (DEP): Quote when passing vars to sub-make. Add warning message
1876 (DEP1): Rewrite for "gcc -MM".
1877 (CLEANFILES): Add DEP2.
1878 Update dependencies.
1879 * Makefile.in: Regenerate.
1881 2000-04-03 Denis Chertykov <denisc@overta.ru>
1883 * avr-dis.c: Syntax cleanup.
1884 (add0fff): Print the pc relative address as a signed number.
1885 (add03f8): Likewise.
1887 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1889 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1890 the parameter ATTRIBUTE_UNUSED.
1891 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1893 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1895 * m10300-opc.c: SP-based offsets are always unsigned.
1897 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1899 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1900 [branch always] instead of "undefined".
1902 2000-03-27 Nick Clifton <nickc@redhat.com>
1904 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1905 short instructions, from end of list of long instructions.
1907 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1909 * Makefile.am (CFILES): Add avr-dis.c.
1910 (ALL_MACHINES): Add avr-dis.lo.
1912 2000-03-27 Alan Modra <alan@linuxcare.com>
1914 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1916 (print_insn_avr): Call function via pointer in K&R compatible way.
1917 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1918 add0fff, add03f8): Convert to old style function declaration and
1920 (avrdis_opcode): Add prototype.
1922 2000-03-27 Denis Chertykov <denisc@overta.ru>
1924 * avr-dis.c: New file. AVR disassembler.
1925 * configure.in (bfd_avr_arch): New architecture support.
1926 * disassemble.c: Likewise.
1927 * configure: Regenerate.
1929 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1931 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1933 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1935 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1936 flag to determine if operand is pc-relative.
1938 (d30v_format_table):
1939 (REL6S3): Renamed from IMM6S3.
1940 Added flag OPERAND_PCREL.
1941 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1942 added flag OPERAND_PCREL.
1943 (IMM12S3U): Replaced with REL12S3.
1944 (SHORT_D2, LONG_D): Delay target is pc-relative.
1945 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1946 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1947 using the REL* operands.
1948 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1949 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1950 LONG_Db, using REL* operands.
1951 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1952 (d30v_opcode_table): Use new *r formats.
1954 2000-02-28 Nick Clifton <nickc@redhat.com>
1956 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1957 'signed_overflow_ok_p'.
1959 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1961 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1962 name of the libtool directory.
1963 * Makefile.in: Rebuild.
1965 2000-02-24 Nick Clifton <nickc@redhat.com>
1967 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1968 (cgen_clear_signed_overflow_ok): New function.
1969 (cgen_signed_overflow_ok_p): New function.
1971 2000-02-23 Andrew Haley <aph@redhat.com>
1973 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1974 m32r-ibld.c, m32r-opc.h: Rebuild.
1976 2000-02-23 Linas Vepstas <linas@linas.org>
1978 * i370-dis.c, i370-opc.c: New.
1980 * disassemble.c (ARCH_i370): Define.
1981 (disassembler): Handle it.
1983 * Makefile.am: Add support for Linux/IBM 370.
1984 * configure.in: Likewise.
1986 * Makefile.in: Regenerate.
1987 * configure: Likewise.
1989 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1991 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1992 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1995 2000-02-22 Andrew Haley <aph@redhat.com>
1997 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1999 * mips-opc.c (G6): New define.
2000 (mips_builtin_op): Add "move" definition for -gp32.
2002 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2004 From Grant Erickson <gerickso@Brocade.COM>:
2005 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2007 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2009 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2012 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2014 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2015 (print_insn_ppi): Likewise.
2016 (print_insn_shx): Use info->mach to select appropriate insn set.
2017 Add support for sh-dsp. Remove FD_REG_N support.
2018 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2019 (sh_arg_type): Likewise. Remove FD_REG_N.
2020 (sh_dsp_reg_nums): New enum.
2021 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2022 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2023 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2024 (arch_sh3_dsp_up): Likewise.
2025 (sh_opcode_info): New field: arch.
2026 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2027 D_REG_N. Fill in arch field. Add sh-dsp insns.
2029 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2031 * arm-dis.c: Change flavor name from atpcs-special to
2032 special-atpcs to prevent name conflict in gdb.
2033 (get_arm_regname_num_options, set_arm_regname_option,
2034 get_arm_regnames): New functions. API to access the several
2035 flavor of register names. Note: Used by gdb.
2036 (print_insn_thumb): Use the register name entry from the currently
2037 selected flavor for LR and PC.
2039 2000-02-10 Nick Clifton <nickc@redhat.com>
2041 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2043 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2044 "mulsh.h" instructions.
2045 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2047 (print_insn_mcore): Add support for little endian targets.
2048 Add support for MULSH and OPSR classes.
2050 2000-02-07 Nick Clifton <nickc@redhat.com>
2052 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2053 Previous delat did not take.
2055 2000-02-03 Timothy Wall <twall@redhat.com>
2057 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2058 to adjust target address bounds checking and calculate the
2059 appropriate octet offset into data.
2061 2000-01-27 Nick Clifton <nickc@redhat.com>
2063 * arm-dis.c: (parse_disassembler_option): Rename to
2064 parse_arm_disassembler_option and allow to be exported.
2066 * disassemble.c (disassembler_usage): New function: Print out any
2067 target specific disassembler options.
2068 Call arm_disassembler_options() if the ARM architecture is being
2071 * arm-dis.c (NUM_ELEM): Define this macro if not already
2073 (arm_regname): New struct type for ARM register names.
2074 (arm_toggle_regnames): Delete.
2075 (parse_disassembler_option): Use register name structure.
2076 (print_insn): New function: Combines duplicate code found in
2077 print_insn_big_arm and print_insn_little_arm.
2078 (print_insn_big_arm): Call print_insn.
2079 (print_insn_little_arm): Call print_insn.
2080 (print_arm_disassembler_options): Display list of supported,
2081 ARM specific disassembler options.
2083 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2085 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2086 ARM_STT_16BIT flag as Thumb code symbols.
2088 * arm-dis.c (printf_insn_little_arm): Ditto.
2090 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2092 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2093 of raw thumb instructions.
2095 2000-01-20 Nick Clifton <nickc@redhat.com>
2097 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2099 2000-01-03 Nick Clifton <nickc@cygnus.com>
2101 * arm-dis.c (streq): New macro.
2102 (strneq): New macro.
2103 (force_thumb): ew local variable.
2104 (parse_disassembler_option): New function: Parse a single, ARM
2105 specific disassembler command line switch.
2106 (parse_disassembler_option): Call parse_disassembler_option to
2107 parse individual command line switches.
2108 (print_insn_big_arm): Check force_thumb.
2109 (print_insn_little_arm): Check force_thumb.
2111 For older changes see ChangeLog-9899
2117 version-control: never