1 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
4 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
6 (mn10300_opcodes): Add new instructions from the am33.
8 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
10 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
12 * i386-dis.c (index16): Add '%' to register names. Use ','
15 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
17 * i386-dis.c: Don't print opcode suffix when we can figure out the
18 size (and gas can!) by register operands, or from the default
20 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
22 (dis386, dis386_twobyte, grps): Use new suffix macros.
23 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
24 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
25 order of cmps operands to agree with Intel docs. Correct operand
26 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
27 agree with Intel docs.
28 (print_insn_x86): Print orphan fwait before other prefixes.
29 Return correct byte count for orphan fwait with prefixes. Don't
30 print `bound' operands in reverse order.
31 (ckprefix): Stop accumulating prefixes if we get fwait.
32 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
34 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
36 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
37 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
39 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
41 Fix problems when bfd_vma is wider than long.
42 * i386-dis.c: Make op_address and start_pc unsigned.
43 (set_op): Make parameter unsigned.
44 (print_insn_x86): Cast to bfd_vma when passing a value to
46 * ns32k-dis.c (CORE_ADDR): Don't define.
47 (print_insn_ns32k): Change type of addr to bfd_vma. Use
48 bfd_scan_vma to read back address.
49 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
51 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
52 (NEXTULONG): New definition.
53 (print_insn_m68k): Avoid overflow when computing third argument of
55 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
56 Use disp instead of val to store offset values.
57 (print_indexed): Use base_disp instead of word to store base
58 displacement, to avoid overflow.
59 * m10300-dis.c (disassemble): Cast value to long when computing
60 pc-relative address, to get correct sign extension.
62 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
64 * m32r-opc.c: Regenerate.
66 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
68 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
69 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
71 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
73 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
75 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
77 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
79 (OP_DSreg): Rename from OP_DSSI.
80 (OP_ESreg): Rename from OP_ESDI.
81 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
83 (append_seg): Rename from append_prefix.
84 (ptr_reg): New function.
85 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
87 (PREFIX_ADDR): Rename from PREFIX_ADR.
88 (float_reg): Add non-broken opcodes for people who don't want
91 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
93 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
96 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
98 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
100 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
102 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
103 0; produce error message for shifts of size 32 (or 64 for 64-bit
104 shifts), because the hardware doesn't support them.
107 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
109 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
112 * vu0.h (sqc2): Fix opcode.
114 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
118 start-sanitize-vr5400
119 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
121 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
122 Change pinfo to use WR_HILO.
126 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
128 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
129 LONG_2, LONG_2b formats to use this new operand.
132 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
134 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
136 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
138 * sparc-dis.c (print_insn_sparc): big endian instruction / little
142 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
144 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
145 and SHORT_B3b formats to use Rb instead of Ra.
147 Add FLAG_MUL16 to MUL2XH opcode.
149 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
150 to existing 1.1.1 parallelisation prohibition procedure.
153 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
155 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
156 * cgen-dis.in (extract_normal): Likewise.
157 * m32r-asm.c,m32r-dis.c: Regenerate.
160 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
162 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
166 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
168 * mips-opc.c (multu1): Add two operand variant for the r5900.
171 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
173 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
174 with a shift count of 0.
177 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
179 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
181 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
183 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
184 (_print_insn_mips): Likewise.
185 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
189 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
191 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
192 (cgen_hw_lookup_by_num): New function.
195 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
198 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
200 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
202 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
204 * sparc-dis.c (print_insn_sparc): Always fetch instructions
205 as big-endian on SPARClite.
208 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
210 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
212 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
217 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
219 * d30v-opc.c (pre_defined_register): Remove alias for r0.
223 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
225 * mips-opc.c (break): Added 20-bit single-operand break
226 instruction for R5900 only.
229 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
231 * po/Make-in (install-info): New target.
233 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
235 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
236 * configure: Rebuild.
238 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
240 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
241 variety of ISA2 instructions to set bottom ten bits of trap code.
243 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
245 * Makefile.am (config.status): Add explicit target so that
246 config.status depends upon bfd/configure.in.
247 * Makefile.in: Rebuild.
249 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
251 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
252 instructions to set bottom ten bits of break code.
253 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
254 for above optional argument.
256 start-sanitize-cygnus
257 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
259 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
260 * m32r-opc.h: Regenerate.
263 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
265 * makefile.vms: Run dec c with /nodebug.
267 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
269 * Makefile.in: Rebuilt.
270 * Makefile.am: Regenerated dependencies with mkdep.
272 * opintl.h (_): Define as dgettext.
274 start-sanitize-cygnus
275 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
277 * configure.in: Add support for --enable-cgen-maint.
278 * Makefile.am (M32R_DEPS): New variable.
279 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
280 * aclocal.m4: Regenerate.
281 * Makefile.in: Regenerate.
282 * configure: Regenerate.
284 * Makefile.am (CGENFILES): Add minsn.scm.
287 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
289 * cgen-asm.c: Internationalised.
290 start-sanitize-cygnus
291 * cgen-asm.in: Internationalised.
292 * cgen-opc.in: Internationalised.
294 * m32r-asm.c: Internationalised.
295 * m32r-dis.c: Internationalised.
296 * m32r-opc.c: Internationalised.
298 * aclocal.m4: Regenerated.
299 * configure: Regenerated.
300 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
301 * Makefile.in: Rebuild.
302 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
303 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
305 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
307 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
309 * aclocal.m4, configure: Rebuild with current tools.
311 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
313 * opintl.h: New file - contains internationalisation macros used
314 by source files in this directory.
315 * po/: New subdirectory - contains internationalisation files.
316 * po/Make-in: New file - Makefile constructor.
317 * po/POTFILES.in: New file - list of files in opcodes directory
318 that should be scan for internationalisation macros.
319 * po/opcodes.pot: New file - list of internationisation strings
320 found in files mentioned in po/POTFILES.in.
321 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
322 entry. Add intl directory to include paths.
323 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
324 HAVE_STRCPY, HAVE_LC_MESSAGES
325 * configure.in: Add rule to build Makefile in po subdirectory.
326 * Makefile.in: Rebuilt.
327 * aclocal.m4: Rebuilt.
328 * config.in: Rebuilt.
329 * configure: Rebuilt.
330 * alpha-opc.c: Internationalised.
331 * arc-dis.c: Internationalised.
332 * arc-opc.c: Internationalised.
333 * arm-dis.c: Internationalised.
334 * cgen-asm.c: Internationalised.
336 * d30v-dis.c: Internationalised.
338 * dis-buf.c: Internationalised.
340 * dvp-dis.c: Internationalised.
341 * dvp-opc.c: Internationalised.
343 * h8300-dis.c: Internationalised.
344 * h8500-dis.c: Internationalised.
345 * i386-dis.c: Internationalised.
346 * m10200-dis.c: Internationalised.
347 * m10300-dis.c: Internationalised.
348 * m68k-dis.c: Internationalised.
349 * m88k-dis.c: Internationalised.
350 * mips-dis.c: Internationalised.
351 * ns32k-dis.c: Internationalised.
352 * opintl.h: Internationalised.
353 * ppc-opc.c: Internationalised.
354 * sparc-dis.c: Internationalised.
355 * v850-dis.c: Internationalised.
356 * v850-opc.c: Internationalised.
358 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
360 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
361 (asm_hash_table_entries): New variable.
362 (cgen_asm_init): Free asm_hash_table_entries.
363 (hash_insn_array,hash_insn_list): New functions.
364 (build_asm_hash_table): Use them. Hash macro insns as well.
365 (cgen_asm_lookup_insn): Update.
366 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
367 (dis_hash_table_entries): New variable.
368 (cgen_dis_init): Free dis_hash_table_entries.
369 (hash_insn_array,hash_insn_list): New functions.
370 (build_dis_hash_table): Use them. Hash macro insns as well.
371 (cgen_dis_lookup_insn): Update.
372 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
373 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
374 (cgen_macro_insn_count): New function.
375 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
376 All callers updated. Sanity check result of extract fn.
377 (@arch@_cgen_get_insn_operands): Change result type to void.
378 Delete args insn_value, length. New arg fields. All callers updated.
379 (@arch@_cgen_lookup_get_insn_operands): New function.
380 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
382 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
384 * i386-dis.c (OP_DSSI): Print segment override.
387 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
389 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
393 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
395 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
399 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
401 * vu0.h (vlqd, vlqi): Update per revised specs.
405 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
407 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
408 (vif_operands): Update.
409 (vif_get_unpackloc): Delete.
410 (state_vif_unpackloc{,_star_p}): Delete.
411 (dvp_opcode_init_parse): Update.
412 (vif_unpack_len_value): Avoid divide by zero.
416 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
418 * vu0.h: Specs changed for VCALLMSR bit pattern.
419 * mips-dis.c: (print_insn_arg) Matching change.
422 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
424 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
427 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
429 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
430 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
431 * configure.in: Define and substitute WIN32LDFLAGS and
433 * aclocal.m4: Rebuild with new libtool.
434 * configure, Makefile.in: Rebuild.
437 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
439 * vu0.h: Corrected bit pattern for VMAXI opcode.
442 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
444 * m32r-opc.c: Regenerate.
447 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
449 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
450 (dvp_expand_macro): Implement.
451 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
452 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
455 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
457 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
458 before trying to copy it.
459 * Makefile.in: Rebuild.
461 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
463 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
466 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
468 * m32r-opc.c: Fix bit patterns for SAT and SATB.
471 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
473 * ns32k-dis.c (bit_extract_simple): New function to extract bits
474 from an arbitrary valid buffer instead of fetching them on demand
476 (invalid_float): use bit_extract_simple() instead of bit_extract().
479 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
481 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
482 * m32r-opc.h: Add extra control registers.
485 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
487 From H.J. Lu <hjl@gnu.org>:
488 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
491 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
493 * Branched binutils 2.9.
496 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
498 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
499 disassembling last 4 bytes of a section.
502 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
504 Fix some gcc -Wall warnings:
505 * arc-dis.c (print_insn): Add casts to avoid warnings.
506 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
507 * d10v-dis.c (dis_long, dis_2_short): Likewise.
509 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
510 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
511 (parse_bc, parse_vfreg, parse_accdest): Likewise.
512 (parse_ffstreg, parse_vif_mode): Likewise.
514 * m10200-dis.c (disassemble): Likewise.
515 * m10300-dis.c (disassemble): Likewise.
516 * ns32k-dis.c (print_insn_ns32k): Likewise.
517 * ppc-opc.c (insert_ral, insert_ram): Likewise.
518 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
519 * cgen-opc.c (cgen_keyword_search_next): Likewise.
520 * d10v-dis.c (dis_long, dis_2_short): Likewise.
522 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
525 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
526 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
527 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
529 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
531 * tic80-dis.c (print_one_instruction): Likewise.
533 * w65-dis.c (print_operand): Likewise.
534 * z8k-dis.c (fetch_data): Likewise.
535 * a29k-dis.c: Add return type for find_byte_func_type.
536 * arc-opc.c: Include <stdio.h>. Remove declarations of
537 insert_multshift and extract_multshift.
539 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
541 (extract_value): Fully parenthesize expression.
544 * dvp-opc.c: Include <ctype.h>.
545 (print_sdest): Add default case to switch.
547 * h8500-dis.c (print_insn_h8500): Initialize local variables.
548 * h8500-opc.h (h8500_table): Fully bracket initializer.
549 * w65-opc.h (optable): Likewise.
550 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
551 * i386-dis.c (OP_E): Initialize local variables.
552 * m10200-dis.c (print_insn_mn10200): Likewise.
553 * mips-dis.c (print_insn_mips16): Likewise.
554 * sh-dis.c (print_insn_shx): Likewise.
555 * v850-dis.c (print_insn_v850): Likewise.
556 * ns32k-dis.c (print_insn_arg): Declare.
557 (get_displacement, invalid_float): Declare.
558 (list_search, sign_extend, flip_bytes): Declare return type.
559 (get_displacement): Likewise.
560 (print_insn_arg): Likewise. Make d int. Fix sprintf format
562 (print_insn_ns32k): Make i unsigned.
563 (invalid_float): Make static. Declare type of val.
564 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
565 on each for iteration.
566 * tic30-dis.c (get_indirect_operand): Likewise.
567 * z8k-dis.c (print_insn_z8001): Declare return type.
568 (print_insn_z8002): Likewise.
569 (unparse_instr): Fix sprintf format strings.
571 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
573 * mips-opc.c: Add "sync.l" and "sync.p".
576 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
578 * dvp-opc.c (extract_vif_datalen): Rewrite.
579 (vif_insn_len): Perform 0->max+1 conversion for direct length.
581 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
583 * dvp-dis.c (print_insn): Print unpack address in hex.
584 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
585 Don't skip over '*', just record it.
586 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
587 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
588 Don't skip over '*', just record it.
589 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
590 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
591 (vif_opcodes): Likewise.
592 (state_vif_{mpg,unpack}loc_star_p): New static locals.
593 (vif_macros,vif_macro_count): New globals.
594 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
595 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
596 (vif_get_wl_cl): New function.
597 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
600 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
602 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
603 default m68k variant to recognize.
605 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
606 (ctrl, cobr, mem, ea): Likewise.
607 (print_addr): Likewise. Remove cast.
608 (ea): Cast argument of print_addr to bfd_vma.
610 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
612 (cgen_parse_unsigned_integer): Likewise.
613 (cgen_parse_address): Likewise.
615 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
617 * i960-dis.c (ctrl): Add full braces to structure initialization.
618 (cobr, mem, reg): Likewise.
619 (ea): Correct parenthesization in expression.
621 * cgen-asm.c: Include <ctype.h>.
622 (build_asm_hash_table): Remove unused local variable i.
623 (cgen_parse_keyword): Add casts to avoid warnings.
625 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
626 symbol. Fix indentation.
627 (print_insn_little_arm): Likewise.
630 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
632 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
637 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
639 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
644 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
646 * dvp-opc.c (vif_operand_datalen_special): New global.
650 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
652 * vu0.h (vcallms): Use 'O' for call target operand.
653 * mips-dis.c (print_insn_arg): Handle 'O'.
656 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
658 * configure.in: Use AM_DISABLE_SHARED.
659 * aclocal.m4, configure: Rebuild with libtool 1.2.
662 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
664 * mips-dis.c: Change '%' to '#' to avoid conflict with vr5400
669 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
671 These patches are courtesy of Jonathan Walton and Tony Thompson
672 (athompso@cambridge.arm.com).
674 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
677 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
678 both the offset and the label closest to the destination.
681 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
683 * vu0.h: New file with cop2/vu0 instructions.
684 * mips-opc.c: Include vu0.h.
685 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
687 (print_insn_mips): Do not emit a tab after an instruction if the
688 first arg is an instruction completer (&). If the next arg is an
689 escape character (%), then print the next arg verbatim.
690 * Makefile.am (mips-opc.lo): Depend on vu0.h
694 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
696 * dvp-opc.c (vif_opcodes): Add stcycl.
698 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
700 * dvp-dis.c (print_dma): Change length from 16 to 8.
703 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
705 * m32r-opc.h: Regenerate.
708 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
710 * dvp-opc.c (print_dest1): Print dest spec again.
711 (print_vfreg,print_accdest): Likewise.
712 (vif_unpack_len): Round result up to word boundary.
715 start-sanitize-vr4320
716 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
718 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
720 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
722 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
727 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
729 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
730 (print_insn): Do mask comparison on proper opcode word.
731 Print unsigned values in hex.
732 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
733 (parse_bc): Catch missing dest.
734 (parse_vfreg): Replace atoi call with strtol.
735 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
736 (parse_bcftreg,parse_ffstreg): Handle missing dest.
737 (extract_gif_eop): New function.
738 (gif_operands): Update eop entry.
739 (VGIFOP,VGIFNREGS): Fix calcs.
740 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
741 (gif_regs): Add entry for unused 11 case.
742 (print_gif_regs): Print empty list instead of nothing.
743 (extract_gif_nloop): Fix value calc.
744 (print_gif_nloop): Always print value, even if 0.
745 (insert_vif_wlcl,extract_vif_wlcl): New functions.
746 (vif_operands): Use them for wl,cl fields.
747 (state_vif_wl,state_vif_cl): New static locals.
748 (parse_vif_mode): Handle numeric args.
749 (vif_unpack_len_value,vif_unpack_len): New functions.
750 (vif_insn_len): Call vif_unpack_len.
753 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
755 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
757 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
759 * cgen-asm.in: Move insertion of generated routines to top of file.
760 (insert_normal): Add prototype. Delete `shift' arg.
761 * cgen-dis.in: Move insertion of generated routines to top of file.
762 (extract_normal): Add prototype. Delete `shift' arg.
763 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
764 (print_keyword): Add prototype. Fix type of `attrs' arg.
766 start-sanitize-vr4320
767 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
769 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
770 * mips-opc.c ("mac","dmac") : Added 4320 insns.
773 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
775 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
776 assume that info->symbols is non-empty.
778 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
780 * alpha-opc.c (cvtqs) There is no such thing.
781 (cvttq): Missing most of the /*d variants.
784 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
786 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
788 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
789 (r5900/msub.s): Takes three operands, not four. Fix opcode.
793 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
795 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
796 delayed branches or jumps.
800 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
802 * dvp-opc.c (vif_operands): Add unpack[u] support.
803 (vif_opcodes): Ditto.
804 (*_vif_imrubits): Renamed from *_vif_imrbits.
806 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
808 * dvp-dis.c (print_insn): Handle word number.
809 Handle mips address vs vu address.
810 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
811 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
812 ({insert,extract}_dma_addr): Fix word ofset.
813 ({insert,print}_gif_regs): Fix encode/decode.
816 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
818 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
820 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
821 * tic30-dis.c (print_branch): Likewise.
823 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
824 * dvp-dis.c (dvp_info_mach_type): New function.
825 (print_insn_dvp): Call it.
826 (print_vif): Return length of 4 if mpg or direct insn so following
827 insns get properly disabled.
828 (print_gif): Fix word order.
829 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
830 (gif_operands): Fix word order.
831 (gif_opcodes): Likewise.
832 ({insert,extract,print}_gif_regs): Likewise.
833 (gif_regs): Add new register number/name changes.
834 (dma_opcodes): Add dmarefe insn.
837 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
839 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
840 saved_symbol code as it is no longer needed.
842 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
844 * cgen-asm.c: Include symcat.h.
845 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
847 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
850 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
852 * dvp-opc.c (extra_dma_flags): Fix typos.
853 (dma_operands): Fix word numbers.
854 (dma_opcodes): Likewise.
855 ({insert,extract}_dma_flags): Likewise.
858 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
860 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
863 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
865 * dvp-dis.c (print_gif): Complete.
866 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
867 (state_gif_{nregs,regs,nloop}): New static locals.
869 (dvp_opcode_init_{parse,print}): Init gif state locals.
870 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
871 (vif_insn_len): Handle `unpack'.
872 ({insert,extract}_dma_flags): Complete.
876 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
878 * mips-opc.c (mula.s): Renamed from multa.s.
881 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
883 * m32r-opc.[ch]: Regenerate.
886 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
888 * dvp-opc.c (dma_operands): Rewrite.
889 (dma_operand_{count,addr}): New globals.
890 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
891 (insert_dma_addr): Insert value into insn.
892 (extract_dma_addr): Extract value from insn.
894 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
896 * dvp-dis.c (print_vu): Handle loi insns.
897 (print_insn): Likewise.
898 * dvp-opc.c (vu_lower_opcodes): Add "loi".
899 (vu_operands): Make LDEST1 a FAKE operand.
900 (parse_dest1): Allow elided argument.
901 (print_dest1): Don't print the argument.
903 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
905 * dvp-opc.c (parse_vfreg): Dest spec is optional.
906 (print_vfreg): Don't print dest spec.
907 (parse_accdest): Dest spec is optional.
908 (print_accdest): Don't print dest spec.
911 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
913 * Makefile.am (CGENFILES): Update.
914 * Makefile.in: Regenerate.
915 * cgen-asm.in (insert_normal): Result is error message now.
916 Validate value to be inserted.
917 (insert_insn_normal): Result is error message now.
918 (@arch@_cgen_assemble_insn): Update.
919 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
920 arguments. Don't perform validation here.
921 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
923 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
925 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
926 operand instance list.
927 * m32r-opc.c: Regenerate.
929 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
931 * Makefile.am (AUTOMAKE_OPTIONS): Define.
932 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
934 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
936 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
938 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
940 * configure.in: Get the version number from BFD.
941 * configure: Rebuild.
943 From H.J. Lu <hjl@gnu.org>:
944 * Makefile.am (libopcodes_la_LDFLAGS): Define.
945 * Makefile.in: Rebuild.
947 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
949 * m32r-opc.c: Regenerate.
950 * m32r-opc.h: Regenerate.
952 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
954 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
955 Ignore ALIAS insns if asked to.
956 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
957 * m32r-opc.c: Regenerate.
960 * dvp.opc.c: Nicely format opcode tables.
961 (vu_operands): New element UFLAGS.
962 (parse_uflags,print_uflags): New functions.
963 (vu_upper_opcodes): Add UFLAGS to all insns.
966 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
968 Fix rac to accept only a0:
969 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
970 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
971 Introduce OPERAND_GPR.
972 * d10v-dis.c (print_operand): Likewise.
974 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
976 * cgen-opc.in: New file.
977 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
978 * Makefile.am (CGENFILES): Add cgen-opc.in.
979 * Makefile.in: Regenerate.
981 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
982 (cgen_hw_lookup): Make result const.
984 * cgen-dis.in (*): Use PTR instead of void *.
985 (print_insn): Delete unused vars `i', `syntax'.
987 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
990 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
992 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
993 (vif_opcodes): Update renamed insns.
994 * dvp-dis.c (*): Likewise.
997 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
999 * configure, aclocal.m4: Rebuild with new libtool.
1002 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1004 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1005 instructions use a PC relative branch, not absolute.
1008 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1010 * configure.in: Set libtool_enable_shared rather than
1011 libtool_shared. Remove diversion hack.
1012 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1014 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1016 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1017 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1019 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1021 * tic30-dis.c: New file.
1022 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1023 * configure.in: Handle bfd_tic30_arch.
1024 * Makefile.am: Rebuild dependencies.
1025 (CFILES): Add tic30-dis.c
1026 (ALL_MACHINES): Add tic30-dis.lo.
1027 * configure, Makefile.in: Rebuild.
1029 start-sanitize-m32rx
1030 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1032 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1033 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1034 macwhi-a and macwlo-a instructions.
1038 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1040 * dvp-opc.c, fixed encoding of a bunch of instructions to
1041 be consistent with the asmvu assembler (and inconsistent
1042 with the specification).
1044 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1046 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1047 in the opcode table. The pkemscalf instruction must come first.
1049 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1051 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1054 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1056 * m32r-opc.h (HAVE_CPU_M32R): Define.
1059 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1061 * dvp-dis.c, dvp-opc.c: New files.
1062 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1063 * configure: Regenerate.
1064 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1065 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1066 (mips-dis.lo): Compile with @archdefs@.
1067 * Makefile.in: Regenerate.
1068 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1069 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1072 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1074 * v850-opc.c (insertion routines): If both alignment and size is
1075 wrong then report this.
1077 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1079 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1080 Only recognize instructions for the current target_processor.
1082 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1084 * d10v-dis.c (PC_MASK): Correct value.
1085 (print_operand): If there's a reloc, don't calculate the
1086 address because they could be in different sections.
1088 start-sanitize-cygnus
1089 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1091 * cgen.sh: Rewrite to be like simulator's version.
1092 * Makefile.am (cgen): Update call to cgen.sh.
1093 * Makefile.in: Regenerate
1096 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1098 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1099 instruction after the 4650's "mul" instruction; nobody's using the
1100 4010 these days. If object files someday indicate which processor
1101 variant they're intended for, we can do a better job at this.
1103 start-sanitize-r5900
1104 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1106 * mips-opc.c (c.lt.s): Add r5900 variant.
1110 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1112 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1113 table provided entry size. Use CGEN_INSN_MNEMONIC.
1114 (cgen_parse_keyword): Rewrite.
1115 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1116 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1117 * cgen-opc.c: Clean up pass over `struct foo' usage.
1118 (cgen_keyword_lookup_value): Handle "" entry.
1119 (cgen_keyword_add): Likewise.
1120 start-sanitize-cygnus
1121 * Makefile.am: Add cgen support.
1122 * Makefile.in: Regenerate.
1123 * configure.in: Add cgen support.
1124 * configure: Regenerate.
1125 * aclocal.m4: Regenerate.
1126 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1129 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1131 * mips-opc.c: Add FP_D to s.d instruction flags.
1133 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1135 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1137 start-sanitize-tic80
1138 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1140 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1141 PC relative offset forms before the 15 bit forms. An assembler command
1142 line option now chooses the default.
1145 start-sanitize-r5900
1146 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1148 * mips-opc.c: Add many missing r5900 instructions.
1152 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1154 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1155 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1158 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1160 * configure: Only build libopcodes shared if --enable-shared's value
1161 was `yes', or was set to `*opcodes*'.
1162 * aclocal.m4: Likewise.
1163 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1164 original source of this bit of code. It's not clear what the best fix
1167 start-sanitize-r5900
1168 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1170 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1172 start-sanitize-tic80
1173 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1175 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1176 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1177 offset forms before the 15 bit forms, to default to the long forms.
1180 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1182 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1184 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1186 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1187 symbol if none is present.
1188 (print_insn_big_arm): Prevent examination of stored symbol if
1191 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1193 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1195 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1197 * disassemble.c: Remove disasm_symaddr() function.
1199 * arm-dis.c: Use info->symbol instead of info->flags to determine
1200 if disassmbly should be in Thumb or Arm mode.
1202 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1204 * arm-dis.c: Add support for disassembling Thumb opcodes.
1205 (print_insn_thumb): New function.
1207 * disassemble.c (disasm_symaddr): New function.
1209 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1210 (thumb_opcodes): Table of Thumb opcodes.
1212 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1214 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1216 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1217 and 'v' as operand types.
1219 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1221 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1222 <olivier.carmona@di.epfl.ch>.
1223 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1224 which has a two word opcode with a one word argument.
1227 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1229 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1230 unsigned, not signed.
1231 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1234 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1236 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1237 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1238 (ftrv): Slay the cut-and-paste monster.
1240 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1242 * d10v-dis.c (print_operand):
1243 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1245 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1247 * d10v-opc.c (OPERAND_FLAG): Split into:
1248 (OPERAND_FFLAG, OPERAND_CFLAG) .
1252 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1254 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1255 field for all INSN_MACRO's.
1256 * mips16-opc.c: same
1258 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1260 * mips-opc.c (sync,cache): These are 3900 insns.
1262 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1264 sh-opc.h (sh_table): Remove ftst/nan.
1266 start-sanitize-vr5400
1267 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1269 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1270 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1272 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1276 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1278 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1279 Add tx49 insns and configury.
1282 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1284 * mips-opc.c (ffc, ffs): Fix mask.
1287 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1289 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1293 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1295 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1296 start-sanitize-vr5400
1297 Added VR5400 instructions.
1298 (N5): New cpu-id macro.
1300 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1302 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1304 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1305 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1307 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1309 * v850-dis.c (disassemble): Replace // with /* ... */
1311 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1313 * sparc-opc.c: Add wr & rd for v9a asr's.
1314 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1315 (v9a_asr_reg_names): New variable.
1316 Patch from David Miller <davem@vger.rutgers.edu>.
1318 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1320 * sparc-opc.c (v9notv9a): New insn type.
1321 (IMPDEP): Move to the end to not conflict with edge8 et al.
1322 Patch from David Miller <davem@vger.rutgers.edu>.
1324 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1326 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1328 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1330 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1332 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1334 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1335 of disassemble_info structure to determine if an overlay address
1336 has a matching symbol in low memory.
1338 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1339 new symbol_at_address_func field in disassemble_info structure.
1341 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1343 * v850-opc.c (extract_d22): Use signed arithmatic.
1345 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1347 * mips-opc.c: Three op mult is not an ISA insn.
1349 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1351 * mips-opc.c: Fix formatting.
1353 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1355 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1356 than assuming that char is signed. Explicitly sign extend 16 bit
1357 values, rather than assuming that short is 16 bits.
1358 (OP_sI, OP_J, OP_DIR): Likewise.
1360 start-sanitize-v850e
1361 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1363 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1367 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1369 * v850-opc.c: Fix typo in comment.
1371 * v850-dis.c (disassemble): Add test of processor type when
1372 determining opcodes.
1374 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1376 * configure.in: Use a diversion to set enable_shared before the
1377 arguments are parsed.
1378 * configure: Rebuild.
1380 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1382 * m68k-opc.c (TBL1): Use ! rather than `.
1383 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1385 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1387 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1389 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1391 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1394 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1395 * aclocal.m4: Rebuild with new libtool.
1396 * configure: Rebuild.
1398 start-sanitize-v850e
1399 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1401 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1404 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1406 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1408 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1410 * v850-opc.c (v850_opcodes): Further rearrangements.
1413 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1415 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1418 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1420 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1423 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1425 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1427 * mips16-opc.c: Added mips16 sdbbp.
1430 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1432 * v850-opc.c: Initialise processors field of v850_opcode structure.
1435 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1437 Merge changes from Martin Hunt:
1439 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1441 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1442 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1443 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1445 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1447 * d30v-dis.c (print_insn): First operand of d*i (delayed
1448 branch) instructions is relative.
1450 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1451 (d30v_operand_table): Add IMM6S3 type.
1452 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1454 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1455 and cmp instructions.
1457 * d30v-opc.c: Correct entries for repeat*, and sat*.
1458 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1459 types. Correct several formats.
1461 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1463 * d30v-opc.c (pre_defined_registers): Change control registers.
1465 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1466 SHORT_C2. Manual was incorrect.
1468 * d30v-dis.c (lookup_opcode): Return value now indicates
1469 if an opcode has a short and a long form. Used for deciding
1470 to append a ".s" or ".l".
1471 (print_insn): Append a ".s" to an instruction if it is
1472 the short form and ".l" if it is a long form. Do not append
1473 anything if the instruction has only one possible size.
1475 * d30v-opc.c: Change mulx2h to require an even register.
1476 New form: SHORT_A2; a SHORT_A form that needs an even
1477 register as the first operand.
1479 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1480 instruction was not being disassembled if there were an odd
1481 number of instructions.
1483 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1486 start-sanitize-v850e
1487 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1489 * v850-dis.c (disassemble): Improved display of register lists.
1492 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1494 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1495 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1496 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1497 fandnot1s, fandnot2s.
1499 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1501 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1503 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1505 * cgen-asm.c (cgen_parse_address): New argument resultp.
1506 All callers updated.
1507 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1509 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1511 * mn10200-dis.c (disassemble): PC relative instructions are
1512 relative to the next instruction, not the current instruction.
1514 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1516 * v850-dis.c (disassemble): Only signed extend values that are not
1517 returned by extract functions.
1518 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1520 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1522 * v850-opc.c: Update comments. Remove use of
1523 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1525 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1527 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1529 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1531 * configure: Rebuilt with latest devo autoconf for NT support.
1533 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1535 * v850-dis.c (disassemble): Use curly brace syntax for register
1538 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1539 where r0 is being used as a destination register.
1541 start-sanitize-v850e
1542 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1544 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1547 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1549 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1550 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1551 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1552 Add insns to access SGR and DBR.
1553 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1555 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1557 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1559 start-sanitize-v850e
1560 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1562 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1563 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1566 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1568 * configure (cgen_files): Add support for v850e target.
1569 * configure.in (cgen_files): Add support for v850e target.
1571 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1573 * configure (cgen_files): Add support for v850ea target.
1574 * configure.in (cgen_files): Add support for v850ea target.
1577 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1579 * configure.in (bfd_arc_arch): Add.
1580 * configure: Rebuild.
1581 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1582 * Makefile.in: Rebuild.
1583 * arc-dis.c, arc-opc.c: New files.
1584 * disassemble.c (ARCH_all): Define ARCH_arc.
1585 (disassembler): Add ARC support.
1587 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1589 start-sanitize-v850e
1590 * v850-dis.c (disassemble): Add support for v850EA instructions.
1592 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1593 (v850_opcodes): Add v850EA instructions.
1595 * v850-dis.c (disassemble): Add support for v850E instructions.
1597 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1598 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1599 insert_spe, extract_spe): New Functions.
1600 (v850_opcodes): Add v850E instructions.
1603 * v850-opc.c: Reorganised and re-layed out to improve readability
1606 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1608 * configure: Rebuild with autoconf 2.12.1.
1610 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1612 * aclocal.m4, configure: Rebuild with new automake patches.
1614 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1616 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1617 * acinclude.m4: Just include acinclude.m4 from BFD.
1618 * aclocal.m4, configure: Rebuild.
1620 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1622 * Makefile.am: New file, based on old Makefile.in.
1623 * acconfig.h: New file.
1624 * acinclude.m4: New file.
1625 * stamp-h.in: New file.
1626 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1627 Removed shared library handling; now handled by libtool. Replace
1628 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1629 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1630 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1631 handling in AC_OUTPUT.
1632 * dep-in.sed: Change .o to .lo.
1633 * Makefile.in: Now built with automake.
1634 * aclocal.m4: Now built with aclocal.
1635 * config.in, configure: Rebuild.
1637 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1639 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1641 start-sanitize-r5900
1642 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1644 * mips-opc.c: Fix coding of mtsa.
1647 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1649 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1651 * sparc-dis.c (sorted_opcodes): New static local.
1652 (struct opcode_hash): `opcode' is pointer to const element.
1653 (build_hash): First arg is now table of sorted pointers.
1654 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1655 (compare_opcodes): Update.
1657 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1659 * cgen-opc.c: #include <ctype.h>.
1660 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1661 Handle case insensitive hashing.
1662 (hash_keyword_value): Change type of `value' to unsigned int.
1664 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1666 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1667 precision FP, mark it as such. Likewise for double precision
1668 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1670 start-sanitize-r5900
1671 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1674 start-sanitize-r5900
1675 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1677 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1678 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1681 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1683 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1685 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1686 nesting depth when all the macros are expanded.
1688 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1690 * sparc-opc.c: The fcmp v9a instructions take an integer register
1691 as a destination, not a floating point register. From Christian
1692 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1694 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1696 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1697 syntax. From Roman Hodek
1698 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1700 * i386-dis.c (twobyte_has_modrm): Fix pand.
1702 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1704 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1706 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1708 * arm-dis.c: Add prototypes for arm_decode_shift and
1711 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1713 * mips-opc.c: Add r3900 insns.
1715 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1717 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1718 print delay slot instructions on the same line. When using a PC
1719 relative load, add a comment with the value being loaded if it can
1722 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1724 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1725 to pushS/popS for segment regs and byte constant so that
1726 pushw/popw printed when in 16 bit data mode.
1728 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1729 print cbtw, cwtd in 16 bit data mode.
1730 * i386-dis.c (putop): extra case W to support above.
1732 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1733 address size prefix in 16 bit address mode.
1735 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1737 * sh-dis.c: Reindent. Rename local variable fprintf to
1740 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1742 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1744 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1746 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1748 * mips16-opc.c (mip16_opcodes): same.
1750 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1752 * m68k-opc.c (moveb): Change $d to %d.
1754 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1756 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1757 (twobyte_has_modrm): Likewise.
1759 (OP_MMX, OP_EM, OP_MS): New static functions.
1761 * i386-dis.c: Revert patch of April 4. The output now matches
1764 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1766 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1769 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1771 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1773 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1775 * Makefile.in (install): Depend upon installdirs.
1776 (installdirs): New target.
1778 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1780 From Thomas Graichen <graichen@rzpd.de>:
1781 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1782 * configure: Rebuild.
1784 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1786 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1787 Delete string{,s}.h support.
1789 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1791 * cgen-asm.c (cgen_parse_operand_fn): New global.
1792 (cgen_parse_{{,un}signed_integer,address}): Update call to
1793 cgen_parse_operand_fn.
1794 (cgen_init_parse_operand): New function.
1795 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1796 from cgen_asm_init_parse.
1797 (m32r_cgen_assemble_insn): New operand `errmsg'.
1798 Delete call to as_bad, return error message to caller.
1799 (m32r_cgen_asm_hash_keywords): #if 0 out.
1801 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1803 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1805 [case 'J']: Fix typo in register name.
1807 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1809 * configure.in: Substitute SHLIB_LIBS.
1810 * configure: Rebuild.
1811 * Makefile.in (SHLIB_LIBS): New variable.
1812 ($(SHLIB)): Use $(SHLIB_LIBS).
1814 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1816 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1818 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1820 * disassemble.c (disassembler): Handle m32r.
1822 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1824 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1825 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1826 * Makefile.in (CFILES): Add them.
1827 (ALL_MACHINES): Add them.
1828 (dependencies): Regenerate.
1829 * configure.in (cgen_files): New variable.
1830 (bfd_m32r_arch): Add entry.
1831 * configure: Regenerate.
1833 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1835 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1836 * configure: Rebuild.
1838 * Makefile.in: Rebuild dependencies.
1840 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1842 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1845 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1847 * Branched binutils 2.8.
1849 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1851 * m10200-dis.c: Rename from mn10200-dis.c.
1852 * m10200-opc.c: Rename from mn10200-opc.c.
1853 * m10300-dis.c: Rename from mn10300-dis.c
1854 * m10300-opc.c: Rename from mn10300-opc.c.
1855 * Makefile.in: Update accordingly.
1857 * mips16-opc.c: Add mul and dmul macros.
1859 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1861 * makefile.vms: Update CFLAGS, add clean target.
1863 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1865 * mips-opc.c: Add "wait". From Ralf Baechle
1866 <ralf@gnu.ai.mit.edu>.
1868 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1869 * configure, config.in: Rebuild.
1870 * sysdep.h: Include <stdlib.h> if it exists.
1871 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1873 * Makefile.in: Rebuild dependencies.
1875 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1877 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1878 Andrew Bray <andy@madhouse.demon.co.uk>.
1880 * mips-opc.c: Add cast when setting mips_opcodes.
1882 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1884 * v850-dis.c (disassemble): Fix sign extension problem.
1885 * v850-opc.c (extract_d*): Fix sign extension problems to make
1886 disassembly calculate branch offsets correctly.
1888 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1890 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1892 * mips-opc.c: Add dctr and dctw.
1895 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1897 * d30v-dis.c (print_insn): Change the way signed constants
1900 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1902 * Makefile.in (BFD_H): New variable.
1903 (HFILES): New variable.
1904 (CFILES): Add all C files.
1905 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1906 Delete old dependencies, and build new ones.
1907 * dep-in.sed: New file.
1909 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1911 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1913 start-sanitize-coldfire
1914 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
1916 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
1919 end-sanitize-coldfire
1920 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1922 * mn10200-opc.c: Change "trap" to "syscall".
1923 * mn10300-opc.c: Add new "syscall" instruction.
1925 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1927 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1928 mulul insns on the coldfire.
1930 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1932 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1933 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1934 (print_insn_little_arm): Likewise.
1936 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1938 Based on patches from H.J. Lu <hjl@lucon.org>:
1939 * i386-dis.c (fetch_data): Add prototype.
1940 * m68k-dis.c (fetch_data): Add prototype.
1941 (dummy_print_address): Add prototype. Make static.
1942 * ppc-opc.c (valid_bo): Add prototype.
1943 * sparc-dis.c (build_hash_table): Add prototype.
1944 (is_delayed_branch, compute_arch_mask): Add prototypes.
1945 (print_insn_sparc): Make several local variables const.
1946 (compare_opcodes): Change arguments to const PTR. Add prototype.
1947 * sparc-opc.c (arg): Change name field to be const.
1948 (lookup_name, lookup_value): Add prototypes. Change table and
1949 name parameters to be const.
1950 (sparc_encode_asi): Change name parameter to be const.
1951 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
1952 (sparc_encode_sparclet_cpreg): Likewise.
1953 (sparc_decode_asi): Change return type to be const.
1954 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
1955 (sparc_decode_sparclet_cpreg): Likewise.
1957 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
1959 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
1960 Solaris doesn't like the combined options, and the -f is
1962 (stamp-tshlink, install): Likewise.
1964 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
1966 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
1969 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
1971 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
1973 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
1975 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
1978 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1980 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
1982 start-sanitize-tic80
1983 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
1985 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
1987 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
1989 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
1992 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1994 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
1995 floatformat_to_double to make portable.
1996 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
1999 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2001 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2002 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2004 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2006 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2007 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2009 start-sanitize-tic80
2010 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2012 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2013 (OFF_SL_BR_SCALED): ... to this, and added the flag
2014 TIC80_OPERAND_BASEREL to the flags word.
2015 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2019 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2021 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2022 Change mips_opcodes from const array to a pointer,
2023 and change bfd_mips_num_opcodes from const int to int,
2024 so that we can increase the size of the mips opcodes table
2027 start-sanitize-tic80
2028 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2030 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2031 store BITNUM values in the table in one's complement form
2032 to match behavior when assembler is given a raw numeric
2033 value for a BITNUM operand.
2034 * tic80-dis.c (print_operand_bitnum): Ditto.
2038 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2040 * d30v-opc.c: Removed references to FLAG_X.
2043 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2045 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2048 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2050 * Makefile.in: Added d30v object files.
2051 * configure: (bfd_d30v_arch) Rebuilt.
2052 * configure.in: (bfd_d30v_arch) Added new case.
2053 * d30v-dis.c: New file.
2054 * d30v-opc.c: New file.
2055 * disassemble.c (disassembler) Add entry for d30v.
2058 start-sanitize-tic80
2059 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2061 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2062 representations for the floating point BITNUM values.
2064 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2066 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2067 in the table in one's complement form, as they appear in the
2069 (tic80_symbol_to_value): Use macros to access predefined
2071 (tic80_value_to_symbol): Ditto.
2072 (tic80_next_predefined_symbol): New function.
2073 * tic80-dis.c (print_operand_bitnum): Remove code that did
2074 one's complement for BITNUM values.
2077 start-sanitize-r5900
2078 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2080 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2083 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2085 * makefile.vms: Remove 8 bit characters. Update to latest
2088 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2090 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2092 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2094 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2095 (IMM24_PCREL): Likewise.
2097 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2099 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2100 address for an extended PC relative instruction that is not a
2103 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2105 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2108 start-sanitize-tic80
2109 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2111 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2112 (tic80_opcodes): Sort entries so that long immediate forms
2113 come after short immediate forms, making it easier for
2114 assembler to select the right one for a given operand.
2117 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2119 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2121 (print_insn_mips16): Likewise.
2123 start-sanitize-r5900
2124 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2126 * mips-opc.c: add r5900.
2129 start-sanitize-tic80
2130 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2132 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2133 a symbol class that restricts translation to just that
2134 class (general register, condition code, etc).
2136 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2138 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2139 and REG_DEST_E for register operands that have to be
2140 an even numbered register. Add REG_FPA for operands that
2141 are one of the floating point accumulator registers.
2142 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2143 (tic80_opcodes): Change entries that need even numbered
2144 register operands to use the new operand table entries.
2145 Add "or" entries that are identical to "or.tt" entries.
2148 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2150 * mips16-opc.c: Add new cases of exit instruction for
2152 * mips-dis.c (print_mips16_insn_arg): Display floating point
2153 registers in operands of exit instruction. Print `$' before
2154 register names in operands of entry and exit instructions.
2156 start-sanitize-tic80
2157 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2159 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2160 pairs for all predefined symbols recognized by the assembler.
2161 Also used by the disassembling routines.
2162 (tic80_symbol_to_value): New function.
2163 (tic80_value_to_symbol): New function.
2164 * tic80-dis.c (print_operand_control_register,
2165 print_operand_condition_code, print_operand_bitnum):
2166 Remove private tables and use tic80_value_to_symbol function.
2169 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2171 * d10v-dis.c (print_operand): Change address printing
2172 to correctly handle PC wrapping. Fixes PR11490.
2174 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2176 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2179 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2181 * mips-dis.c (print_insn_mips16): Set insn_info information.
2182 (print_mips16_insn_arg): Likewise.
2184 * mips-dis.c (print_insn_mips16): Better handling of an extend
2185 opcode followed by an instruction which can not be extended.
2187 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2189 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2190 coldfire moveb instruction to not allow an address register as
2191 destination. Although the documentation does not indicate that
2192 this is invalid, experiments uncovered unexpected behavior.
2193 Added a comment explaining the situation. Thanks to Andreas
2194 Schwab for pointing this out to me.
2196 start-sanitize-tic80
2197 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2199 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2200 entries are presorted so that entries with the same mnemonic are
2201 adjacent to each other in the table. Sort the entries for each
2202 instruction so that this is true.
2205 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2207 * m68k-dis.c: Include <libiberty.h>.
2208 (print_insn_m68k): Sort the opcode table on the most significant
2209 nibble of the opcode.
2211 start-sanitize-tic80
2212 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2214 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2215 "vsub", "vst", "xnor", and "xor" instructions.
2216 (V_a1): Renamed from V_a, msb of accumulator reg number.
2217 (V_a0): Add macro, lsb of accumulator reg number.
2219 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2221 * tic80-dis.c (print_insn_tic80): Broke excessively long
2222 function up into several smaller ones and arranged for
2223 the instruction printing function to be callable recursively
2224 to print vector instructions that have both a load and a
2225 math instruction packed into a single opcode.
2226 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2227 to explain why it comes after the other vector opcodes.
2230 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2232 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2233 move insns to handle immediate operands.
2235 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2237 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2238 fix operand mask in the "moveml" entries for the coldfire.
2240 start-sanitize-tic80
2241 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2243 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2244 New macros for building vector instruction opcodes.
2245 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2246 FMT_LI, which were unused. The field is now a flags field.
2247 Remove some opcodes that are possible, but illegal, such
2248 as long immediate instructions with doubles for immediate
2249 values. Add "vadd" and "vld" instructions.
2251 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2253 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2254 the order more logical. Move the shift alias instructions ("rotl",
2255 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2256 interspersed with the regular sr.x and sl.x instructions. Add
2257 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2258 "sub", "subu", "swcr", and "trap".
2260 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2262 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2263 (OFF_SL_PC): Renamed from OFF_SL.
2264 (OFF_SS_BR): New operand type for base relative operand.
2265 (OFF_SL_BR): New operand type for base relative operand.
2266 (REG_BASE): New operand type for base register operand.
2267 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2268 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2269 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2271 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2272 10 char field, padded with spaces on rhs, rather than a string
2273 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2274 than old TIC80_OPERAND_RELATIVE. Add support for new
2275 TIC80_OPERAND_BASEREL flag bit.
2277 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2279 * tic80-dis.c (print_insn_tic80): Print floating point operands
2281 * tic80-opc.c (SPFI): Add single precision floating point
2282 immediate operand type.
2283 (ROTATE): Add rotate operand type for shifts.
2284 (ENDMASK): Add for shifts.
2285 (n): Macro for the 'n' bit.
2286 (i): Macro for the 'i' bit.
2287 (PD): Macro for the 'PD' field.
2288 (P2): Macro for the 'P2' field.
2289 (P1): Macro for the 'P1' field.
2290 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2294 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2296 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2297 adding in current address for pc-relative operands.
2299 start-sanitize-tic80
2300 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2302 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2303 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2304 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2305 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2306 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2307 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2308 (REG_SCALED, LSI_SCALED): New operand types.
2309 (E): New macro for 'E' bit at bit 27.
2310 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2311 opcodes, including the various size flavors (b,h,w,d) for
2312 the direct load and store instructions.
2314 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2316 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2318 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2319 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2320 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2321 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2322 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2323 masks with "MASK_* & ~M_*" to get the M bit reset.
2324 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2326 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2328 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2329 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2330 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2332 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2333 CC, SICR, and LICR table entries.
2334 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2335 "bcnd", and "brcr" opcodes.
2338 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2340 * ppc-opc.c (powerpc_operands): Make comment match the
2341 actual fields (no shift field).
2342 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2343 start-sanitize-tic80
2344 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2345 partial implementation, work in progress.
2346 * tic80-opc.c (tic80_operands): Begin construction operands table.
2347 (tic80_opcodes): Continue populating opcodes table and start
2348 filling in the operand indices.
2349 (tic80_num_opcodes): Add this.
2352 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2354 * m68k-opc.c: Add #B case for moveq.
2356 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2358 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2359 before they are used.
2361 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2363 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2364 for "breakpoint" instruction.
2366 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2368 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2369 (dep): Use ALL_CFLAGS rather than CFLAGS.
2371 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2373 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2376 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2378 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2379 start-sanitize-tic80
2380 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2383 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2385 * mips16-opc.c: Add "abs".
2387 start-sanitize-tic80
2388 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2390 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2391 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2392 (disassembler): Add bfd_arch_tic80 support to set disassemble
2393 to print_insn_tic80.
2394 * tic80-dis.c (print_insn_tic80): Add stub.
2396 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2398 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2399 * configure: Regenerate with autoconf.
2400 * tic80-dis.c: Add file.
2401 * tic80-opc.c: Add file.
2404 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2406 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2408 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2410 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2411 (mn10200_opcodes): Use it for some logicals and btst insns.
2412 Add "break" and "trap" instructions.
2414 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2416 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2418 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2420 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2421 relative load or add now depends upon whether the instruction is
2424 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2426 * mn10200-dis.c: Finish writing disassembler.
2427 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2428 Fix mask for "jmp (an)".
2430 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2431 handle endianness issues for mn10300.
2433 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2435 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2437 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2438 instruction. Fix opcode field for "movb (imm24),dn".
2440 * mn10200-opc.c (mn10200_operands): Fix insertion position
2443 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2445 * mn10200-opc.c: Create mn10200 opcode table.
2446 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2447 but moving along nicely.
2449 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2451 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2453 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2455 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2456 specifiers for fmovem* instructions.
2458 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2460 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2462 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2464 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2467 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2469 * mn10300-opc.c: Add some comments explaining the various
2472 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2474 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2476 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2479 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2480 operand specifiers in fmovm* instructions.
2482 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2484 * ppc-opc.c (insert_li): Give an error if the offset has the two
2485 least significant bits set.
2487 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2489 * mips-dis.c (print_insn_mips16): Separate the instruction from
2490 the arguments with a tab, not a space.
2492 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2494 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2497 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2500 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2502 * configure: Rebuild with autoconf 2.12.
2504 Add support for mips16 (16 bit MIPS implementation):
2505 * mips16-opc.c: New file.
2506 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2507 (mips16_reg_names): New static array.
2508 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2509 after seeing a 16 bit symbol.
2510 (print_insn_little_mips): Likewise.
2511 (print_insn_mips16): New static function.
2512 (print_mips16_insn_arg): New static function.
2513 * mips-opc.c: Add jalx instruction.
2514 * Makefile.in (mips16-opc.o): New target.
2515 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2516 * configure: Rebuild.
2518 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2520 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2521 operand specifiers in *save, *restore and movem* instructions.
2523 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2526 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2527 register operands for immediate arithmetic, not, neg, negx, and
2528 set according to condition instructions.
2530 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2531 specifier of the effective-address operand in immediate forms of
2532 arithmetic instructions. The specifier for the immediate operand
2533 notes how and where the constant will be stored.
2535 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2537 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2540 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2543 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2545 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2547 * mn10300-dis.c (disassemble): Handle register lists.
2549 * mn10300-opc.c: Fix handling of register list operand for
2550 "call", "ret", and "rets" instructions.
2552 * mn10300-dis.c (disassemble): Print PC-relative and memory
2553 addresses symbolically if possible.
2554 * mn10300-opc.c: Distinguish between absolute memory addresses,
2555 pc-relative offsets & random immediates.
2557 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2559 (disassemble): Handle SPLIT and EXTENDED operands.
2561 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2563 * mn10300-dis.c: Rough cut at printing some operands.
2565 * mn10300-dis.c: Start working on disassembler support.
2566 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2568 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2570 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2572 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2574 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2576 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2578 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2579 register argument is calls and jmp instructions.
2581 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2583 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2584 getx operand. Fix opcode for mulqu imm,dn.
2586 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2588 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2589 in MN10300_OPERAND_SPLIT operands for how many bits
2590 appear in the basic insn word. Add IMM32_HIGH24,
2591 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2592 (mn10300_opcodes): Use new operands as needed.
2594 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2595 for bset, bclr, btst instructions.
2596 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2598 * mn10300-opc.c (mn10300_operands): Remove many redundant
2599 operands. Update opcode table as appropriate.
2600 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2601 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2603 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2605 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2606 operands (for indexed load/stores). Fix bitpos for DI
2607 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2608 few instructions that insert immediates/displacements in the
2609 middle of the instruction. Add IMM8E for 8 bit immediate in
2610 the extended part of an instruction.
2611 (mn10300_operands): Use new opcodes as appropriate.
2613 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2615 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2616 sequential so the assembler never parallelizes it with
2619 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2621 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2622 a data/address register that appears in register field 0
2623 and register field 1.
2624 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2626 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2628 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2629 standard disassembly.
2631 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2632 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2633 Recategorize PALcode instructions.
2635 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2637 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2639 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2641 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2642 there are no operand types.
2644 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2646 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2648 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2650 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2652 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2654 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2656 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2657 and sst.w instructions.
2659 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2662 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2664 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2667 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2669 * ppc-opc.c (PPCPWR2): Define.
2670 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2673 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2675 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2676 field for movhu instruction.
2678 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2679 cast value to "long" not "signed long" to keep hpux10
2682 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2684 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2687 * mn10300-opc.c (FMT*): Remove definitions.
2689 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2690 for shift-by-register opcodes.
2692 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2693 into [AD][MN][01] for encoding the position of the register
2696 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2698 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2699 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2701 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2703 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2704 Fix various typos. Add "PAREN" operand.
2705 (MEM, MEM2): Define.
2706 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2707 operands. Fix several typos.
2709 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2712 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2714 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2715 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2717 (mn10300_opcodes): Break opcode format out into its own field.
2718 Update many operand fields to deal with signed vs unsigned
2719 issues. Fix one or two typos in the "mov" instruction
2720 opcode, mask and/or operand fields.
2722 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2724 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2725 m68851 wasn't reset.
2727 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2729 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2730 all opcodes. Very rough cut at operands for all opcodes.
2732 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2735 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2737 * mn10200-opc.c, mn10300-opc.c: New files.
2738 * mn10200-dis.c, mn10300-dis.c: New files.
2739 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2740 * disassemble.c: Break mn10x00 support into 10200 and 10300
2742 * configure.in: Likewise.
2743 * configure: Rebuilt.
2745 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2747 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2749 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2751 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2753 * disassemble (ARCH_mn10x00): Define.
2754 (disassembler): Handle bfd_arch_mn10x00.
2755 * configure.in: Recognize bfd_mn10x00_arch.
2756 * configure: Rebuilt.
2758 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2760 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2761 accordingly. Don't declare functions using op_rtn.
2763 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2765 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2766 params to be more standard.
2767 * (disassemble): Print absolute addresses and symbolic names for
2768 branch and jump targets.
2769 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2771 * (v850_opcodes): Add breakpoint insn.
2773 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2775 * m68k-opc.c: Move the fmovemx data register cases before the
2776 other cases, so that they get recognized before the data register
2777 does gets treated as a degenerate register list.
2779 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2781 * mips-opc.c: Add a case for "div" and "divu" with two registers
2782 and a destination of $0.
2784 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2786 * mips-dis.c (print_insn_arg): Add prototype.
2787 (_print_insn_mips): Ditto.
2789 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2791 * mips-dis.c (print_insn_arg): Print condition code registers as
2794 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2796 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2798 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2800 * v850-dis.c (disassemble): Make static. Provide prototype.
2802 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2804 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2807 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2809 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2810 ']' characters into the output stream.
2811 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2812 Add "memop" field to all opcodes (for the disassembler).
2813 Reorder opcodes so that "nop" comes before "mov" and "jr"
2814 comes before "jarl".
2816 * v850-dis.c (print_insn_v850): Fix typo in last change.
2818 * v850-dis.c (print_insn_v850): Properly handle disassembling
2819 a two byte insn at the end of a memory region when the memory
2820 region's size is only two byte aligned.
2822 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2824 * v850-dis.c (v850_reg_names): Define.
2825 (v850_sreg_names, v850_cc_names): Likewise.
2826 (disassemble): Very rough cut at printing operands (unformatted).
2828 * v850-opc.c (BOP_MASK): Fix.
2829 (v850_opcodes): Fix mask for jarl and jr.
2831 * v850-dis.c: New file. Skeleton for disassembler support.
2832 * Makefile.in Remove v850 references, they're not needed here.
2833 * configure.in: Add v850-dis.o when building v850 toolchains.
2834 * configure: Rebuilt.
2835 * disassemble.c (disassembler): Call v850 disassembler.
2837 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2838 (insert_d8_6, extract_d8_6): New functions.
2839 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2840 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2842 (IF4A, IF4B): Use "D7" instead of "D7S".
2843 (IF4C, IF4D): Use "D8_7" instead of "D8".
2844 (IF4E, IF4F): New. Use "D8_6".
2845 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2846 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2848 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2849 (v850_operands): Change D16 to D16_15, use special insert/extract
2850 routines. New new D16 that uses the generic insert/extract code.
2851 (IF7A, IF7B): Use D16_15.
2852 (IF7C, IF7D): New. Use D16.
2853 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2855 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2856 message. Issue an error if the branch offset is odd.
2858 * v850-opc.c: Add notes about needing special insert/extract
2859 for all the load/store insns, except "ld.b" and "st.b".
2861 * v850-opc.c (insert_d22, extract_d22): New functions.
2862 (v850_operands): Use insert_d22 and extract_d22 for
2864 (insert_d9): Fix range check.
2866 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2868 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2869 and set bits field to D9 and D22 operands.
2871 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2873 * v850-opc.c (v850_operands): Define SR2 operand.
2874 (v850_opcodes): "ldsr" uses R1,SR2.
2876 * v850-opc.c (v850_opcodes): Fix opcode specs for
2877 sld.w, sst.b, sst.h, sst.w, and nop.
2879 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2881 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2882 end of the opcode table.
2884 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2886 * d10v-opc.c (pre_defined_registers): Added register pairs,
2887 "r0-r1", "r2-r3", etc.
2889 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2891 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2892 Create I16U for an unsigned 16bit mmediate operand.
2893 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2895 * v850-opc.c (v850_operands): Define EP operand.
2896 (IF4A, IF4B, IF4C, IF4D): Use EP.
2898 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2899 with immediate operand, "movhi". Tweak "ldsr".
2901 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2902 correct. Get sld.[bhw] and sst.[bhw] closer.
2904 * v850-opc.c (v850_operands): "not" is a two byte insn
2906 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2908 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2910 * v850-opc.c (two): Get order of words correct.
2912 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2914 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2915 register source and destination operands.
2916 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2918 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2919 same thinko in "trap" opcode.
2921 * v850-opc.c (v850_opcodes): Add initializer for size field
2924 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2925 Add D8 for 8-bit unsigned field in short load/store insns.
2926 (IF4A, IF4D): These both need two registers.
2927 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2928 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2929 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2930 for "ldsr" and "stsr".
2931 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2934 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2935 short store word (sst.w).
2937 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2939 * v850-opc.c (v850_operands): Added insert and extract fields,
2940 pointers to functions that handle unusual operand encodings.
2942 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2944 * v850-opc.c (v850_opcodes): Enable "trap".
2946 * v850-opc.c (v850_opcodes): Fix order of displacement
2947 and register for "set1", "clr1", "not1", and "tst1".
2949 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2951 * v850-opc.c (v850_operands): Add "B3" support.
2952 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2955 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2957 * v850-opc.c: Close unterminated comment.
2959 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2961 * v850-opc.c (v850_operands): Add flags field.
2962 (v850_opcodes): add move opcodes.
2964 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2966 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2967 * configure: (bfd_v850v_arch) Add new case.
2968 * configure.in: (bfd_v850_arch) Add new case.
2969 * v850-opc.c: New file.
2971 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2973 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2975 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2977 * d10v-opc.c: Add additional information to the opcode
2978 table to help determinine which instructions can be done
2981 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2983 * mpw-make.sed: Update editing of include pathnames to be
2986 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2988 * arm-opc.h: Added "bx" instruction definition.
2990 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2992 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2994 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2996 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
2998 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3000 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3002 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3004 * makefile.vms: Update for alpha-opc changes.
3006 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3008 * i386-dis.c (print_insn_i386): Actually return the correct value.
3009 (ONE, OP_ONE): #ifdef out; not used.
3011 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3013 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3014 Changed subi operand type to treat 0 as 16.
3016 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3018 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3021 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3023 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3024 memory transfer instructions. Add new format string entries %h and %s.
3025 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3028 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3030 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3031 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3033 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3035 * alpha-dis.c (print_insn_alpha_osf): Remove.
3036 (print_insn_alpha_vms): Remove.
3037 (print_insn_alpha): Make globally visible. Chose the register
3038 names based on info->flavour.
3039 * disassemble.c: Always return print_insn_alpha for the alpha.
3041 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3043 * d10v-dis.c (dis_long): Handle unknown opcodes.
3045 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3047 * d10v-opc.c: Changes to support signed and unsigned numbers.
3048 All instructions with the same name that have long and short forms
3049 now end in ".l" or ".s". Divs added.
3050 * d10v-dis.c: Changes to support signed and unsigned numbers.
3052 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3054 * d10v-dis.c: Change all functions to use info->print_address_func.
3056 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3058 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3059 move ccr/sr insns more strict so that the disassembler only
3060 selects them when the addressing mode is data register.
3062 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3063 * d10v-opc.c (pre_defined_registers): Declare.
3064 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3065 to pick a better name for the registers.
3067 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3069 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3070 operands for fexpand and fpmerge. From Christian Kuehnke
3071 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3073 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3075 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3076 print routine. Take new regnames and cpumask arguments.
3077 Kill the environment variable nonsense.
3078 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3079 (print_insn_alpha_vms): New function. Do VMS style regnames.
3080 * disassemble.c (disassembler): Test bfd flavour to pick
3081 between OSF and VMS routines. Default to OSF.
3083 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3085 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3086 * configure: Rebuild.
3087 * Makefile.in (install): Use @INSTALL_SHLIB@.
3089 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3091 * configure: (bfd_d10v_arch) Add new case.
3092 * configure.in: (bfd_d10v_arch) Add new case.
3093 * d10v-dis.c: New file.
3094 * d10v-opc.c: New file.
3095 * disassemble.c (disassembler) Add entry for d10v.
3097 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3099 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3100 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3102 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3104 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3105 distinguish between variants of the instruction set.
3106 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3107 distinguish between variants of the instruction set.
3109 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3111 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3112 the 8086 instruction set.
3113 * i386-dis.c: General cleanups. Make most things static. Add
3114 prototypes. Get rid of static variables aflags and dflags. Pass
3115 them as args (to almost everything).
3117 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3119 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3121 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3123 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3124 if the next arg is marked with SRC_IN_DST. Gross.
3126 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3127 we're looking for and find EXR.
3129 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3130 if we're looking for KBIT and we don't find it.
3132 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3135 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3136 3bit immediate operands.
3138 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3140 * Released binutils 2.7.
3142 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3143 <kkaempf@progis.ac-net.de>.
3145 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3147 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3149 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3151 * sparc-dis.c (print_insn_sparclite): New routine to print
3152 sparclite instructions.
3154 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3156 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3158 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3160 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3161 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3162 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3164 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3166 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3167 Use autoconf-set values.
3168 (docdir, oldincludedir): Removed.
3169 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3171 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3173 * alpha-opc.c: New file.
3174 * alpha-opc.h: Remove.
3175 * alpha-dis.c: Complete rewrite to use new opcode table.
3176 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3177 * configure: Rebuild with autoconf 2.10.
3178 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3179 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3181 (alpha-opc.o): New target.
3183 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3185 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3186 Set imm_added_to_rs1 even if the source and destination register
3189 * sparc-opc.c: Add some two operand forms of the wr instruction.
3191 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3193 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3196 * disassemble.c (disassembler): Handle H8/S.
3197 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3199 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3201 * sparc-opc.c: Add beq/teq as aliases for be/te.
3203 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3204 <sergei@msil.sps.mot.com>.
3206 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3208 * makefile.vms: New file.
3210 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3212 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3214 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3217 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3219 * i386-dis.c (OP_OFF): Call append_prefix.
3221 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3223 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3224 unsigned long to silence a warning from the Solaris PowerPC
3227 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3229 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3231 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3233 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3235 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3236 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3237 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3238 cpush, cpusha, cpull sparclet insns.
3240 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3242 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3244 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3246 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3247 Set F_FLOAT on other floating point instructions.
3249 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3251 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3253 (powerpc_opcodes): Add 860/821 specific SPRs.
3255 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3257 * configure.in: Permit --enable-shared to specify a list of
3258 directories. Set and substitute BFD_PICLIST.
3259 * configure: Rebuild.
3260 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3261 uses. Set to @BFD_PICLIST@.
3263 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3265 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3266 not "abs", which may be needed for the absolute in something
3267 like btst #0,@10:8. Print L_3 immediates separately from other
3268 immediates. Change ABSMOV reference to ABS8MEM.
3270 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3272 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3273 (current_arch_mask): New static global.
3274 (compute_arch_mask): New static function.
3275 (print_insn_sparc): Delete sparc_v9_p. New static local
3276 current_mach. Resort opcode table if current_mach changes.
3277 Generalize "insn not supported" test.
3278 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3279 Delete test for v9/!v9.
3280 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3282 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3283 (brfcx): Renamed to FBRX.
3284 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3285 coprocessor mnemonics are not supported on the sparclet).
3286 (condf): Renamed to CONDF.
3287 (SLCBCC2): Delete F_ALIAS flag.
3289 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3291 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3292 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3294 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3296 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3297 that the shared library version number is set correctly.
3299 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3301 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3302 Miles Bader <miles@gnu.ai.mit.edu>.
3303 * configure: Rebuild.
3305 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3307 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3310 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3312 * configure: Rebuild with autoconf 2.8.
3314 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3316 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3317 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3319 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3321 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3322 since they appear as targets in Makefile.in.
3323 * configure: Rebuild.
3325 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3327 * mpw-make.sed: Edit out shared library support bits.
3329 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3331 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3332 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3333 (sparc_opcodes): Add sparclet insns.
3334 (sparclet_cpreg_table): New static local.
3335 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3336 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3338 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3340 * i386-dis.c (index16): New static variable.
3341 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3343 (OP_indirE): Return result of OP_E.
3344 (OP_E): Check for 16 bit addressing mode, and disassemble
3345 correctly. Optimised 32 bit case a little. Don't print
3346 "(base,index,scale)" when sib specifies only an offset.
3348 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3350 * configure.in: Set and substitute SHLIB_DEP.
3351 * configure: Rebuild.
3352 * Makefile.in (SHLIB_DEP): New variable.
3353 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3354 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3355 COMMON_SHLIB, add them to piclist with appropriate modifications.
3356 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3357 here: just use piclist.
3359 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3361 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3362 (print_insn_sparc): Rewrite v9/not-v9 tests.
3363 (compare_opcodes): Likewise.
3364 * sparc-opc.c (MASK_<ARCH>): Define.
3365 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3366 (sparclet,v6notv9): Define.
3367 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3368 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3370 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3372 * configure.in: Call AC_PROG_CC before configure.host.
3373 * configure: Rebuild.
3375 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3377 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3379 * i386-dis.c (onebyte_has_modrm): New static array.
3380 (twobyte_has_modrm): New static array.
3381 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3383 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3385 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3388 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3390 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3393 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3395 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3396 m68010up, not just m68020up | cpu32.
3398 * Makefile.in (SONAME): New variable.
3399 ($(SHLINK)): Make a link to the transformed name, as well.
3400 (stamp-tshlink): New target.
3401 (install): Skip stamp-tshlink during install.
3403 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3405 * configure.in: Call AC_ARG_PROGRAM.
3406 * configure: Rebuild.
3407 * Makefile.in (program_transform_name): New variable.
3408 (install): Transform library name before installing it.
3410 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3412 * i960-dis.c (mem): Add HX dcinva instruction.
3414 Support for building as a shared library, based on patches from
3415 Alan Modra <alan@spri.levels.unisa.edu.au>:
3416 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3417 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3418 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3419 * configure: Rebuild.
3420 * Makefile.in (ALLLIBS): New variable.
3421 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3422 (COMMON_SHLIB, SHLINK): New variables.
3423 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3424 (STAGESTUFF): Remove variable.
3425 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3426 (stamp-piclist, piclist): New targets.
3427 ($(SHLIB), $(SHLINK)): New targets.
3428 ($(OFILES)): Depend upon stamp-picdir.
3429 (disassemble.o): Build twice if PICFLAG is set.
3430 (MOSTLYCLEAN): Add pic/*.o.
3431 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3432 (distclean): Remove pic and stamp-picdir.
3433 (install): Install shared libraries.
3434 (stamp-picdir): New target.
3436 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3438 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3439 Print unknown instruction as "unknown", rather than in hex.
3441 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3443 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3445 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3447 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3449 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3451 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3452 when necessary. From Ulrich Drepper
3453 <drepper@myware.rz.uni-karlsruhe.de>.
3455 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3457 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3458 sparc_num_opcodes. Update architecture enum values.
3459 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3460 (sparc_opcode_lookup_arch): New function.
3461 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3462 (sparc_opcodes): Add v9a shutdown insn.
3464 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3466 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3467 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3469 (print_insn_sparc64): Deleted.
3470 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3473 * sparc-opc.c (architecture_pname): Add v9a.
3475 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3477 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3478 incorrectly defined as 0x16 when it should be 0x15.
3479 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3480 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3481 excb (exception barrier) which is defined in the Alpha
3482 Architecture Handbook version 2.
3483 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3484 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3485 disassembled as or, for example.
3487 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3489 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3490 (_print_insn_mips): Change i from int to unsigned int.
3492 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3494 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3495 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3497 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3499 * i386-dis.c: Added Pentium Pro instructions.
3501 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3503 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3506 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3508 * sh-opc.h (sh_nibble_type): Added REG_B.
3509 (sh_arg_type): Added A_REG_B.
3510 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3512 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3514 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3516 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3518 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3520 * Makefile.in (distclean): Remove stamp-h. From Ronald
3521 F. Guilmette <rfg@monkeys.com>.
3523 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3525 From David Mosberger-Tang <davidm@azstarnet.com>:
3526 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3529 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3531 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3532 (sh_table): Added many SH3 opcodes.
3533 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3535 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3537 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3538 (subco,subco.): Mark this PPC, not PPCCOM.
3540 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3542 * configure: Rebuild with autoconf 2.7.
3544 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3546 * configure: Rebuild with autoconf 2.6.
3548 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3550 * configure.in: Sort list of architectures. Accept but do nothing
3551 for alliant, convex, pyramid, romp, and tahoe.
3553 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3555 * a29k-dis.c (print_special): Change num to unsigned int.
3557 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3559 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3562 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3564 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3565 * configure: Rebuilt.
3567 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3569 * configure.in: Add case for bfd_i860_arch.
3570 * configure: Rebuild.
3572 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3574 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3575 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3576 (NEXTDOUBLE): Likewise.
3577 (print_insn_m68k): Don't match fmoveml if there is more than one
3578 register in the list.
3579 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3581 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3583 * m68k-opc.c: Use #W rather than #w.
3584 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3586 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3588 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3589 and likewise for all the dbxx opcodes.
3591 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3593 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3595 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3597 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3598 the VR4100 specific instructions to the mips_opcodes structure.
3600 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3602 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3603 ugly Metrowerks bug in CW6, is fixed in CW7.
3605 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3607 * ppc-opc.c (whole file): Add flags for common/any support.
3609 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3611 * Makefile.in (BISON): Remove macro.
3612 (FLAGS_TO_PASS): Remove BISON.
3614 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3616 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3618 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3619 instructions that take no args by looking at the match mask.
3620 (print_insn_arg): Always print "%" before register names.
3621 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3622 [case '_']: Don't print "@#" before address.
3623 [case 'J']: Use "%s" as format string, not register name.
3624 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3626 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3628 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3631 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3633 From David Mosberger-Tang <davidm@azstarnet.com>
3635 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3636 (alpha_insn_set): added definitions for VAX floating point
3637 instructions (Unix compilers don't generate these, but handcoded
3638 assembly might still use them).
3640 * alpha-dis.c (print_insn_alpha): added support for disassembling
3641 the miscellaneous instructions in the Alpha instruction set.
3643 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3645 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3646 no longer create sysdep.h, sed ppc-opc.c to work around a
3647 serious Metrowerks C bug.
3648 * mpw-make.in: Remove.
3649 * mpw-make.sed: New file, used by mpw-configure to edit
3650 Makefile.in into an MPW makefile.
3652 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3654 * Makefile.in (maintainer-clean): New synonym for realclean.
3656 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3658 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3659 which use '0', '1', and '2' instead. Specify the proper size for
3660 a pmove immediate operand. Correct the pmovefd patterns to be
3661 moves to a register, not from a register.
3662 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3664 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3666 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3667 %psr, %wim, %tbr as F_NOTV9.
3669 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3671 * Makefile.in (Makefile): Just rebuild Makefile when running
3673 (config.h, stamp-h): New targets.
3674 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3675 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3676 rebuilding config.h.
3677 * configure: Rebuild.
3679 * mips-opc.c: Change unaligned loads and stores with "t,A"
3680 operands to use "t,A(b)".
3682 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3684 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3686 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3688 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3689 until 3 instead of until 2.
3691 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3693 * Makefile.in (ALL_CFLAGS): Define.
3694 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3695 (MOSTLYCLEAN): Add config.log.
3696 (distclean): Don't remove config.log.
3697 * configure.in: Substitute HDEFINES.
3698 * configure: Rebuild.
3700 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3702 * sh-opc.h (sh_arg_type): Add F_FR0.
3703 (sh_table, case fmac): Add F_FR0 as first argument.
3705 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3707 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3709 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3711 * sparc-dis.c: Remove all references to NO_V9.
3713 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3715 * aclocal.m4: Just include ../bfd/aclocal.m4.
3716 * configure: Rebuild.
3718 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3720 * sparc-dis.c (X_DISP19): Define.
3721 (print_insn, case 'G'): Use it.
3722 (print_insn, case 'L'): Sign extend displacement.
3724 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3726 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3727 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3728 host_makefile_frag or frags.
3729 * aclocal.m4: New file.
3730 * configure: Rebuild.
3731 * Makefile.in (INSTALL): Set to @INSTALL@.
3732 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3733 (INSTALL_DATA): Set to @INSTALL_DATA@.
3735 (AR_FLAGS): Set to rc rather than qc.
3736 (CC): Define as @CC@.
3737 (CFLAGS): Set to @CFLAGS@.
3738 (@host_makefile_frag@): Remove.
3739 (config.status): Remove dependency upon @frags@.
3741 * configure.in: ../bfd/config.bfd now just sets shell variables.
3742 Use them rather than looking through target Makefile fragments.
3743 * configure: Rebuild.
3745 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3747 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3749 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3751 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3752 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3755 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3756 (lookup_{name,value}): New functions.
3757 (prefetch_table): New static local.
3758 (sparc_{encode,decode}_prefetch): New functions.
3759 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3761 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3763 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3766 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3768 * sh-dis.c: Correct comment on first line of file.
3770 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3772 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3774 * sparc-opc.c (asi, membar): New static locals.
3775 (sparc_{encode,decode}_{asi,membar}): New functions.
3776 (sparc_opcodes, membar insn): Fix.
3777 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3778 Support decoding of membar masks.
3781 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3783 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3785 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3787 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3788 and likewise for the other branches. Add bhs as an alias for bcc,
3789 and likewise for the size variants. Add dbhs as an alias for
3792 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3794 * sh-opc.h (FP sts instructions): Update to match reality.
3796 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3798 * m68k-dis.c: (fpcr_names): Add % before all register names.
3799 (reg_names): Likewise.
3800 (print_insn_arg): Don't explicitly print % before register names.
3801 Add % before register names in static array names. In case 'r',
3802 print data registers as `@(Dn)', not `Dn@'. When printing a
3803 memory address, don't print @# before it.
3804 (print_indexed): Change base_disp and outer_disp from int to
3805 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3806 syntax. Sign extend 8 byte displacement correctly.
3807 (print_base): Print using MIT syntax. Print zpc when appropriate.
3808 Change parameter disp from int to bfd_vma.
3810 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3813 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3815 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3816 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3817 * sh-opc.h (sh_arg_type): Add new operand types.
3818 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3820 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3822 * Makefile.in (distclean): Remove generated file config.h.
3824 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3826 * Makefile.in (distclean): Remove generated file config.h.
3828 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3830 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3832 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3834 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3835 rather than numopcodes. Use m68k_opcodes rather than removed
3836 opcode function. Don't check F_ALIAS.
3837 (print_insn_arg): Change first parameter to be const char *.
3838 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3839 (m68k-opc.o): New target.
3840 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3841 * configure: Rebuild.
3843 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3845 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3846 (opcode_bits, opcode_hash_table): New variables.
3847 (opcodes_initialized): Renamed from opcodes_sorted.
3848 (build_hash_table): New function.
3849 (is_delayed_branch): Use hash table.
3850 (print_insn): Renamed from print_insn_sparc, made static.
3851 Build and use hash table. If !sparc64, ignore sparc64 insns,
3852 and vice-versa if sparc64.
3853 (print_insn_sparc, print_insn_sparc64): New functions.
3854 (compare_opcodes): Move sparc64 opcodes to end.
3855 Print commutative insns with constant second.
3856 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3858 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3860 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3861 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3862 avoids printing a delay slot in a delay slot.
3863 * sh-opc.h (sh_table): Fully bracket last entry.
3865 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3867 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3869 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3871 * configure.in: Get host_makefile_frag from ${srcdir}.
3873 * configure.in: Autoconfiscated. Check for string[s].h. Create
3874 config.h from config.in. Don't set up sysdep.h link.
3875 * sysdep.h: New file.
3876 * configure, config.in: New files, generated from configure.in.
3877 * Makefile.in: Updated to be processed autoconf-style.
3878 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3879 (Makefile): Depend on config.status.
3880 (config.status): New rule.
3881 * configure.bat: Update Makefile substitutions.
3883 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3885 * mips-opc.c (L1): Define.
3886 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3887 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3890 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3892 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3893 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3894 have multiple add units but only a single logical unit.
3896 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3897 shifted by 18, without any insertion or extraction function.
3898 (insert_cr, extract_cr): Remove.
3900 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3902 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3905 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3907 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3908 * sh-opc.h: Add copyright.
3910 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3912 * Makefile.in (crunch-m68k): Delete extra target accidentally
3913 checked in a while ago.
3915 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3917 * sh-opc.h (sh_table): Add SH3 support.
3919 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3921 * sh-opc.h: Added bsrf and braf.
3923 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3925 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3926 bogus [ls]fm{ea,fd} patterns.
3928 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3929 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3930 initialize it from memory. Make function static.
3931 (print_insn_{big,little}_arm): New functions.
3932 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3933 the correct endianness.
3935 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3937 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3940 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3942 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3943 17th, so that it builds again using GCC as the compiler.
3945 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3947 * mips-dis.c (print_insn_little_mips): Cast return value from
3948 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3949 expects an unsigned long, and that might be fewer words of
3950 argument storage (e.g., if bfd_vma is long long on a 32-bit
3952 (print_insn_big_mips): Likewise with bfd_getb32 value.
3953 (_print_insn_mips): Now static.
3955 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3957 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3958 gcc memory hog problem with initializer is fixed.
3960 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3962 Merge in support for Mac MPW as a host.
3963 (Old change descriptions retained for informational value.)
3965 * mpw-config.in (archname): Compute from the config.
3966 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3968 * mpw-config.in (target_arch): Compute from canonical target.
3969 (m68k, mips, powerpc, sparc): Add architectures.
3970 * mpw-make.in (disassemble.c.o): Add.
3971 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3973 * mpw-config.in (BFD_MACHINES): Set to a default value.
3974 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3976 * mpw-make.in (CSEARCH): Add extra-include to search path.
3978 * mpw-config.in (varargs.h): Don't create.
3979 (sysdep.h): Create using forward-include.
3980 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3982 * mpw-config.in: New file, MPW version of configure.in.
3983 * mpw-make.in: New file, MPW version of Makefile.in.
3985 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3987 * alpha-dis.c (print_insn_alpha): Put empty statement after
3990 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3992 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3993 (low_sign_extend): Likewise.
3994 (get_field): Delete unused function.
3995 (set_field, deposit_14, deposit_21): Likewise.
3997 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3999 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4002 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4004 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4006 * alpha-opc.h (OSF_ASMCODE): define
4007 print pal-code names as defined in App C of the
4008 Alpha Architecture Reference Manual
4010 * alpha-dis.c: cleaned up output
4011 print stylized code forms as defined in App A.4.3 of the
4012 Alpha Architecture Reference Manual
4014 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4016 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4018 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4021 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4023 * m68k-dis.c (opcode): New function. Returns address of opcode
4024 table entry given index, even if the opcode table was split to
4025 work around gcc bugs.
4026 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4028 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4029 (reg_names): Now const.
4030 (print_insn_arg): Arrays cacheFieldName and names now const.
4031 (print_indexed): Array scales now const.
4033 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4035 * ppc-opc.c: Sort recently added instructions by minor opcode
4036 number within major opcode number.
4038 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4040 * hppa-dis.c: Include libhppa.h.
4042 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4044 * mips-opc.c: Change dli to use M_DLI, and add dla.
4046 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4048 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4050 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4052 * mips-opc.c: Add r4650 mul instruction.
4054 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4056 * mips-opc.c: Add uld and usd macros for unaligned double load and
4059 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4061 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4062 mfdcr, mtdcr, icbt, iccci.
4064 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4066 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4067 signed char fields to shorts, more portable.
4069 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4071 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4072 char fields as signed chars, since they may have negative values.
4074 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4076 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4077 (mycroft@netbsd.org).
4079 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4081 From "Logg, Ed" <elogg@ea.com>:
4082 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4083 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4086 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4088 * ppc-opc.c: Changes based on patch from David Edelsohn
4089 <edelsohn@mhpcc.edu>.
4090 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4093 (insert_tbr): New static function.
4094 (extract_tbr): New static function.
4095 (XFXFXM_MASK, XFXM): Define.
4096 (XSPRBAT_MASK, XSPRG_MASK): Define.
4097 (powerpc_opcodes): Add instructions to access special registers by
4098 name. Add mtcr and mftbu.
4100 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4102 * mips-opc.c (P3): Define.
4103 (mips_opcodes): Add mad and madu.
4105 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4107 * configure.in: Add W65 support.
4108 * disassemble.c: Likewise.
4109 * w65-opc.h, w65-dis.c: New files.
4111 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4113 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4116 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4118 * mips-opc.c: Add dli as a synonym for li.
4120 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4122 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4123 print something for reserved opcode values, even if it won't
4126 * mips-dis.c (_print_insn_mips): When initializing, shift right
4127 and mask, to avoid sign extension problems on the Alpha.
4129 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4132 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4134 * sh-opc.h (mov.l gbr): Get direction right.
4135 * sh-dis.c (print_insn_shx): New function.
4136 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4137 print opcodes with right byte order.
4139 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4141 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4142 to avoid conflicts with getopt.
4144 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4146 * hppa-dis.c (print_insn_hppa): Read the instruction using
4147 bfd_getb32, so that it works on a little endian or 64 bit host.
4148 Remove unused local variable op.
4150 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4152 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4153 addu does not work correctly if -mips3.
4155 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4157 * a29k-dis.c (print_special): Add special register names defined
4158 on 29030, 29040 and 29050.
4159 (print_insn): Handle new operand type 'I'.
4161 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4163 * Makefile.in (INSTALL): Use top level install.sh script.
4165 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4167 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4168 that it works on a little endian host.
4170 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4172 * configure.in: Use ${config_shell} when running config.bfd.
4174 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4176 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4178 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4180 * a29k-dis.c (print_insn): Print the opcode.
4182 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4184 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4186 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4188 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4190 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4192 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4193 which store a value into memory.
4195 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4197 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4198 * arm-dis.c, arm-opc.h: New files.
4200 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4202 * Makefile.in (ns32k-dis.o): Add dependency.
4203 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4204 string, not as array of chars.
4206 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4208 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4210 * sparc-opc.c: Added sparclite extended FP operations, and
4211 versions of v9 impdep* instructions permitting specification of
4214 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4216 * i960-dis.c (reg_names): Now const.
4217 (struct sparse_tabent): New type, copied from array type in mem
4219 (ctrl): Local static array ctrl_tab now const.
4220 (cobr): Local static array cobr_tab now const.
4221 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4222 static variable mem_tab no longer explicitly initialized. Changed
4223 mem_init to const array of struct sparse_tabent.
4224 (reg): Local static variable reg_tab no longer explicitly
4225 initialized. Changed reg_init to const array of struct
4227 (ea): Local static array scale_tab now const.
4229 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4232 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4234 * configure.bat: the disassember needs to be enabled for
4235 "objdump -d" to work in djgpp.
4237 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4239 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4240 (invalid_float): Enabled general version, doesn't require running
4241 on ns32k host. Changed to take char* argument, and test for
4242 explicitly specified sizes, instead of using sizeof() on host CPU
4244 (INVALID_FLOAT): Cast first argument.
4245 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4246 list_P032, list_M032): Now const.
4247 (optlist, list_search): Made appropriate arguments now point to
4249 (print_insn_arg): Changed static array of one-character-string
4250 pointers into a static const array of characters; fixed sprintf
4251 statement accordingly.
4253 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4255 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4256 from distribution. A ns32k-dis.c from a previous distribution has
4257 been brought up to date and supports the new interface.
4259 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4261 * configure.in: add bfd_ns32k_arch target support.
4263 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4264 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4266 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4268 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4271 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4273 * h8300-dis.c, mips-dis.c: Don't use true and false.
4275 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4277 * configure.in: Change --with-targets to --enable-targets.
4279 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4281 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4282 opcodes to the first instruction with that opcode, to speed
4283 disassembly of large files. From ralphc@pyramid.com (Ralph
4286 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4288 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4290 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4292 * configure.bat: update to latest makefile.in
4294 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4296 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4297 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4298 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4299 slot insn is in a delay slot.
4300 * z8k-opc.h: (resflg): Fix patterns.
4301 * h8500-opc.h Fix CR insn patterns.
4303 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4305 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4306 "cmpl" before POWER versions, so that gas -many uses them.
4308 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4310 * disassemble.c: New file.
4311 * Makefile.in (OFILES): Add disassemble.o.
4312 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4313 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4314 binutils/configure.in.
4316 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4317 opcode being examined.
4319 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4321 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4322 (insert_ral, insert_ram, insert_ras): New functions.
4323 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4324 RAS for store with update.
4326 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4328 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4329 (edelsohn@npac.syr.edu).
4331 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4333 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4336 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4338 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4340 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4342 * ppc-opc.c (powerpc_operands): The signedp field has been
4343 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4344 instead. Add new operand SISIGNOPT.
4345 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4346 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4347 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4350 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4352 * i386-dis.c (struct private): Renamed to dis_private. `private'
4353 is a reserved word for dynix cc.
4355 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4357 * configure.in: Change error message to refer to bfd/config.bfd
4358 rather than bfd/configure.in.
4360 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4362 * ppc-opc.c: Define POWER2 as short alias flag.
4363 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4366 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4368 * i960-dis.c (print_insn_i960): Don't read a second word for
4369 opcodes 0, 1, 2 and 3.
4371 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4373 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4375 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4377 * m68881-ext.c: Removed; no longer used.
4378 * Makefile.in: Changed accordingly.
4380 * m68k-dis.c (ext_format_68881): Don't declare.
4381 (print_insn_m68k): If an instruction uses place 'i', it uses at
4382 least four fixed bytes.
4383 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4384 extended float, convert to double using floatformat_to_double, not
4385 ieee_extended_to_double, and fetch the data before converting it.
4387 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4389 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4390 davidj@ICSI.Berkeley.EDU (David Johnson).
4392 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4394 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4395 PowerPC uses bdnz[l][a].
4397 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4399 * dis-buf.c, i386-dis.c: Include sysdep.h.
4401 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4403 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4405 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4406 by Motorola PowerPC 601 with PPC_OPCODE_601.
4407 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4408 Disassemble Motorola PowerPC 601 instructions as well as normal
4409 PowerPC instructions.
4411 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4413 * i960-dis.c (reg, mem): Just use a static array instead of
4416 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4418 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4419 condition name index if this is for a negated condition.
4421 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4422 Floating point format for 'H' operand is backwards from normal
4423 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4424 operands (fmpyadd and fmpysub), handle bizarre register
4425 translation correctly for single precision format.
4427 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4428 or 'I' operands if the next format specifier is 'M' (fcmp
4429 condition completer).
4431 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4433 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4434 single number giving a bitmask for the MB and ME fields of an M
4435 form instruction. Change NB to accept 32, and turn it into 0;
4436 also turn 0 into 32 when disassembling. Seperated SH from NB.
4437 (insert_mbe, extract_mbe): New functions.
4438 (insert_nb, extract_nb): New functions.
4439 (SC_MASK): Mask out SA and LK bits.
4440 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4441 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4442 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4443 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4444 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4445 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4446 (powerpc_macros): Define table of macro definitions.
4447 (powerpc_num_macros): Define.
4449 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4450 if PPC_OPERAND_NEXT is set.
4452 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4454 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4455 char. Retrieve contents using bfd_getl32 instead of shifting.
4457 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4459 * ppc-opc.c: New file. Opcode table for PowerPC, including
4460 opcodes for POWER (RS/6000).
4461 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4462 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4463 (CFILES): Add ppc-dis.c.
4464 (ppc-dis.o, ppc-opc.o): New targets.
4465 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4467 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4469 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4470 No space before 'u', 'f', or 'N'.
4472 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4474 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4475 farther than we should.
4477 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4479 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4481 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4483 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4485 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4486 needs it, to prevent reading past the end of a section.
4488 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4490 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4491 Removed t,A case for la; always use t,A(b) case.
4493 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4495 From Ted Lemen <mellon@pepper.ncd.com>
4496 * mips-dis.c (print_insn_arg): Handle 'k'.
4497 * mips-opc.c: Make cache use k, not t.
4499 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4501 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4502 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4503 FLOAT_FORMAT_CODE to put out floating point register names.
4505 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4507 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4509 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4511 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4513 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4515 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4516 larger than 32. Moved dsxx32 variants first for disassembler.
4518 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4520 * z8kgen.c, z8k-opc.h: Add full lda information.
4522 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4524 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4525 movb instructions. Any necessary space will be emitted by
4526 the code to handle nullification completers.
4528 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4530 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4532 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4534 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4535 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4537 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4539 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4541 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4543 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4544 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4546 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4548 * m88k-dis.c (m88kdis): comment change. Remove space after
4550 (printop): handle new arg types DEC and XREG for m88110.
4552 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4554 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4555 type for absolute branch addresses. Delete special
4556 "ble" and "be" code in 'W' operand code.
4558 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4560 * mips-opc.c: Set hazard information correctly for branch
4561 likely instructions.
4563 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4565 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4566 info->fprintf_func for printing and info->print_address_func for
4569 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4571 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4573 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4575 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4576 Corrected second case of "b" for disassembler.
4578 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4580 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4581 to BFD swapping routines to correspond to BFD name changes.
4583 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4585 * mips-opc.c: Change div machine instruction to be z,s,t rather
4586 than s,t. Change div macro to be d,v,t rather than d,s,t.
4587 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4588 rem and remu which generates only the corresponding div
4589 instruction. This is for compatibility with the MIPS assembler,
4590 which only generates the simple machine instruction when an
4591 explicit destination of $0 is used.
4592 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4594 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4596 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4597 WR_31 hazard for bal, bgezal, bltzal.
4599 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4601 * hppa-dis.c (print_insn_hppa): Use print function
4602 from within the disassemble_info, not fprintf_filtered.
4604 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4606 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4607 Law, law@cs.utah.edu.)
4609 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4611 * mips-opc.c ("absu"): Removed.
4614 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4617 Changed hazard information to distinguish between memory load
4618 delays and coprocessor load delays.
4620 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4622 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4624 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4626 * configure.in: Don't pass cpu to config.bfd.
4628 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4630 * m88k-dis.c (m88kdis): Make class unsigned.
4632 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4634 * alpha-dis.c (print_insn_alpha): One branch format case was
4635 missing the instruction name.
4637 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4639 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4640 Add the arch-specific auxiliary files.
4641 (OFILES): Remove the arch-specific auxiliary files
4642 and use BFD_MACHINES instead of DIS_LIBS.
4643 * configure.in: Set BFD_MACHINES based on --with-targets option.
4645 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4647 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4650 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4652 * sparc-opc.c: Change CONST to const to deal with gcc
4653 -Dconst=__const -traditional.
4655 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4657 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4658 coprocessor instructions out of #if 0, and made them use new
4661 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4663 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4665 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4667 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4668 instruction, for use by the disassembler.
4670 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4671 hand-coded sign extensions that depended on 32-bit host ints.
4672 FIXME, we still depend on big-endian host bitfield ordering.
4673 (sparc_print_insn): Set the insn_info_valid field, and the
4674 other fields that describe the instruction being printed.
4676 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4678 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4679 `jmp' instead of just one of them.
4681 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4683 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4684 (fput_fp_reg_r): Renamed from fput_reg_r.
4685 (fput_fp_reg): New function.
4686 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4688 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4690 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4692 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4694 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4696 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4697 don't output a space.
4699 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4701 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4703 * mips-opc.c: New file, containing opcode table from
4704 ../include/opcode/mips.h.
4705 * Makefile.in: Add it.
4707 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4709 * m88k-dis.c: New file, moved in from gdb and changed to use the
4710 new dis-asm.h disassembler interface.
4711 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4712 (m88k-dis.o): New target.
4714 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4716 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4717 argument string const char * to correspond to opcode/mips.h.
4719 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4721 * mips-dis.c: Updated to account for name changes in new version
4723 * Makefile.in: Added header file dependencies.
4725 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4727 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4729 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4731 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4732 extend, rather than shifts.
4734 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4736 * Makefile.in: Undo 15 June change.
4738 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4740 * m68k-dis.c (print_insn_arg): Change return value to byte count
4742 * m68k-dis.c: Re-write to detect invalid operands before
4743 printing anything, so we can handle this the same way we
4744 handle invalid opcodes.
4746 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4748 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4750 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4752 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4755 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4757 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4759 * configure.in: Do make sysdep.h link.
4760 * Makefile.in: Search ../include. Don't search ../bfd.
4762 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4764 Changes from Jeff Law, law@cs.utah.edu:
4765 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4766 Do not print a space before the completers specified by
4769 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4771 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4772 defined, since gdb has been fixed.
4774 Changes from Jeff Law, law@cs.utah.edu:
4775 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4776 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4777 be a *disassemble_info, not a *FILE.
4778 * hppa-dis.c: Support 'd', '!', and 'a'.
4779 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4780 * hppa-dis.c: Delete cases which are no longer needed.
4782 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4784 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4786 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4788 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4791 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4793 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4794 * configure.in: No longer need to configure to get sysdep.h.
4796 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4798 * Patches from Jeffrey Law <law@cs.utah.edu>.
4799 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4800 templates for 1.1 FP computational instructions.
4802 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4804 * h8500-dis.c (print_insn_h8500): Address argument is type
4806 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4809 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4810 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4812 * sparc-dis.c (compare_opcodes): Move static declaration to
4815 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4817 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4818 instruction, remove unimp hack from 'l' argument.
4820 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4822 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4825 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4827 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4828 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4831 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4833 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4834 arrays of string pointers to 2-d arrays of chars, to save
4837 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4839 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4840 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4842 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4844 * hppa-dis.c: New file from Utah, adapted to new disassembler
4846 * Makefile.in: Include it.
4848 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4850 * sh-dis.c, sh-opc.h: New files.
4852 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4854 * alpha-dis.c, alpha-opc.h: New files.
4856 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4858 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4861 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4863 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4865 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4867 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4870 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4872 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4873 and double percent signs a few places.
4875 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4877 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4878 Use info->print_address_func not print_address.
4880 * dis-buf.c (generic_print_address): New function.
4882 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4884 * Makefile.in: Add sparc-dis.c.
4885 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4887 Add `add' instruction to the set that get checked
4888 for a preceding `sethi' in order to print an absolute address.
4889 * (print_insn): Disassembly prefers real instructions.
4890 (is_delayed_branch): Speed up.
4891 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4892 Still missing some float ops, and needs testing.
4893 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4894 F_ALIAS. Use printf, not fprintf, when not passing a file
4896 (compare_opcodes): Check that identical instructions have
4897 identical opcodes, complain otherwise.
4900 * Include reg_names.
4902 Use dis-asm.h/read_memory_func interface.
4904 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4906 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4907 deliberately return non-zero to setjmp from longjmp. Otherwise
4908 this code fails to compile.
4910 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4912 * m68k-dis.c: Fix prototype for fetch_arg().
4914 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4916 * dis-buf.c: New file, for new read_memory_func interface.
4917 Makefile.in (OFILES): Include it.
4918 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4919 Use new read_memory_func interface.
4921 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4923 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4924 * h8500-opc.h: Fix couple of opcodes.
4926 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4928 * Makefile.in: add dvi & installcheck targets
4930 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4932 * Makefile.in: Update for h8500-dis.c.
4934 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4936 * h8500-dis.c, h8500-opc.h: New files
4938 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4940 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4941 ../include/dis-asm.h.
4942 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4943 and ../gdb/m68k-pinsn.c).
4944 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4945 and ../gdb/i386-pinsn.c).
4946 * m68881-ext.c: New file. Moved definition of
4947 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4948 * Makefile.in: Adjust for new files.
4949 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4950 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4951 can be dis-assembled.
4953 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4955 * mips-dis.c (print_insn_arg): Now returns void.
4957 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4959 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4960 files that use the macros.
4962 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4964 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4965 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4966 (CFILES): Added mips-dis.c.
4968 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4970 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4971 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4973 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4975 * Makefile.in: Improve *clean rules.
4976 * configure.in: Allow a default host.
4978 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4980 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4981 files include other sysdep files
4983 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4985 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4987 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4989 * configure.in: For host support, use ../bfd/configure.host
4990 so it stays in sync with the ../bfd/hosts database.
4992 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4994 * configure.in: use cpu-vendor-os triple instead of nested cases
4996 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
4998 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
4999 *always* the wrong one.
5001 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5003 * z8kgen.c: added copyright info
5005 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5007 * z8k-dis.c (unparse_instr): prettier tabs
5008 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5010 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5012 * configure.in: Add ncr* configuration.
5013 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5014 picayune ANSI compilers happy.
5016 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5018 * configure.in (i386): Make i386 and i486 synonymous for now.
5019 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5021 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5023 * Makefile.in (install): Fix typo.
5025 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5027 * Makefile.in (make): Remove obsolete crud.
5028 (sparc-opc.o): Avoid Sun Make VPATH bug.
5030 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5032 * Makefile.in: since there are no SUBDIRS, remove rule and
5033 references of subdir_do.
5035 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5037 * Makefile.in (install): Get the library name right here too.
5038 Don't install bfd.h, since it's unrelated to this library. No
5039 subdirs to recurse into, either.
5040 (CFILES): The source file has a .c suffix, not .o.
5042 * sparc-opc.c: New file, moved from BFD.
5043 * Makefile.in (OFILES): Build it.
5045 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5047 * z8k-dis.c: fixed forward refferences of some declarations.
5049 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5051 * Makefile.in: get the name of the library right
5053 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5055 * z8k-dis.c: knows how to disassemble z8k stuff
5056 * z8k-opc.h: new file full of z8000 opcodes
5060 version-control: never
projects / deliverable / binutils-gdb.git / blob