1 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
7 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
9 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
10 (tic80_opcodes): Sort entries so that long immediate forms
11 come after short immediate forms, making it easier for
12 assembler to select the right one for a given operand.
15 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
17 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
19 (print_insn_mips16): Likewise.
22 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
24 * mips-opc.c: add r5900.
28 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
30 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
31 a symbol class that restricts translation to just that
32 class (general register, condition code, etc).
34 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
36 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
37 and REG_DEST_E for register operands that have to be
38 an even numbered register. Add REG_FPA for operands that
39 are one of the floating point accumulator registers.
40 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
41 (tic80_opcodes): Change entries that need even numbered
42 register operands to use the new operand table entries.
43 Add "or" entries that are identical to "or.tt" entries.
46 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
48 * mips16-opc.c: Add new cases of exit instruction for
50 * mips-dis.c (print_mips16_insn_arg): Display floating point
51 registers in operands of exit instruction. Print `$' before
52 register names in operands of entry and exit instructions.
55 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
57 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
58 pairs for all predefined symbols recognized by the assembler.
59 Also used by the disassembling routines.
60 (tic80_symbol_to_value): New function.
61 (tic80_value_to_symbol): New function.
62 * tic80-dis.c (print_operand_control_register,
63 print_operand_condition_code, print_operand_bitnum):
64 Remove private tables and use tic80_value_to_symbol function.
68 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
70 * d10v-dis.c (print_operand): Change address printing
71 to correctly handle PC wrapping. Fixes PR11490.
74 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
76 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
79 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
81 * mips-dis.c (print_insn_mips16): Set insn_info information.
82 (print_mips16_insn_arg): Likewise.
84 * mips-dis.c (print_insn_mips16): Better handling of an extend
85 opcode followed by an instruction which can not be extended.
87 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
89 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
90 coldfire moveb instruction to not allow an address register as
91 destination. Although the documentation does not indicate that
92 this is invalid, experiments uncovered unexpected behavior.
93 Added a comment explaining the situation. Thanks to Andreas
94 Schwab for pointing this out to me.
97 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
99 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
100 entries are presorted so that entries with the same mnemonic are
101 adjacent to each other in the table. Sort the entries for each
102 instruction so that this is true.
105 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
107 * m68k-dis.c: Include <libiberty.h>.
108 (print_insn_m68k): Sort the opcode table on the most significant
109 nibble of the opcode.
112 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
114 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
115 "vsub", "vst", "xnor", and "xor" instructions.
116 (V_a1): Renamed from V_a, msb of accumulator reg number.
117 (V_a0): Add macro, lsb of accumulator reg number.
119 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
121 * tic80-dis.c (print_insn_tic80): Broke excessively long
122 function up into several smaller ones and arranged for
123 the instruction printing function to be callable recursively
124 to print vector instructions that have both a load and a
125 math instruction packed into a single opcode.
126 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
127 to explain why it comes after the other vector opcodes.
130 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
132 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
133 move insns to handle immediate operands.
135 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
137 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
138 fix operand mask in the "moveml" entries for the coldfire.
141 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
143 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
144 New macros for building vector instruction opcodes.
145 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
146 FMT_LI, which were unused. The field is now a flags field.
147 Remove some opcodes that are possible, but illegal, such
148 as long immediate instructions with doubles for immediate
149 values. Add "vadd" and "vld" instructions.
151 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
153 * tic80-opc.c (tic80_operands): Reorder some table entries to make
154 the order more logical. Move the shift alias instructions ("rotl",
155 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
156 interspersed with the regular sr.x and sl.x instructions. Add
157 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
158 "sub", "subu", "swcr", and "trap".
160 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
162 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
163 (OFF_SL_PC): Renamed from OFF_SL.
164 (OFF_SS_BR): New operand type for base relative operand.
165 (OFF_SL_BR): New operand type for base relative operand.
166 (REG_BASE): New operand type for base register operand.
167 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
168 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
169 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
171 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
172 10 char field, padded with spaces on rhs, rather than a string
173 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
174 than old TIC80_OPERAND_RELATIVE. Add support for new
175 TIC80_OPERAND_BASEREL flag bit.
177 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
179 * tic80-dis.c (print_insn_tic80): Print floating point operands
181 * tic80-opc.c (SPFI): Add single precision floating point
182 immediate operand type.
183 (ROTATE): Add rotate operand type for shifts.
184 (ENDMASK): Add for shifts.
185 (n): Macro for the 'n' bit.
186 (i): Macro for the 'i' bit.
187 (PD): Macro for the 'PD' field.
188 (P2): Macro for the 'P2' field.
189 (P1): Macro for the 'P1' field.
190 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
194 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
196 * mn10200-dis.c (disassemble): Mask off unwanted bits after
197 adding in current address for pc-relative operands.
200 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
202 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
203 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
204 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
205 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
206 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
207 REG_BASE_M_SI, REG_BASE_M_LI respectively.
208 (REG_SCALED, LSI_SCALED): New operand types.
209 (E): New macro for 'E' bit at bit 27.
210 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
211 opcodes, including the various size flavors (b,h,w,d) for
212 the direct load and store instructions.
214 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
216 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
218 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
219 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
220 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
221 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
222 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
223 masks with "MASK_* & ~M_*" to get the M bit reset.
224 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
226 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
228 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
229 correctly. Add support for printing TIC80_OPERAND_BITNUM and
230 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
232 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
233 CC, SICR, and LICR table entries.
234 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
235 "bcnd", and "brcr" opcodes.
238 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
240 * ppc-opc.c (powerpc_operands): Make comment match the
241 actual fields (no shift field).
242 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
244 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
245 partial implementation, work in progress.
246 * tic80-opc.c (tic80_operands): Begin construction operands table.
247 (tic80_opcodes): Continue populating opcodes table and start
248 filling in the operand indices.
249 (tic80_num_opcodes): Add this.
252 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
254 * m68k-opc.c: Add #B case for moveq.
256 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
258 * mn10300-dis.c (disassemble): Make sure all variables are initialized
259 before they are used.
262 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
264 * v850-opc.c (v850_opcodes): Put curly-braces around operands
265 for "breakpoint" instruction.
268 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
270 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
271 (dep): Use ALL_CFLAGS rather than CFLAGS.
274 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
276 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
280 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
282 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
284 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
287 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
289 * mips16-opc.c: Add "abs".
292 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
294 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
295 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
296 (disassembler): Add bfd_arch_tic80 support to set disassemble
298 * tic80-dis.c (print_insn_tic80): Add stub.
300 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
302 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
303 * configure: Regenerate with autoconf.
304 * tic80-dis.c: Add file.
305 * tic80-opc.c: Add file.
309 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
311 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
314 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
316 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
317 (mn10200_opcodes): Use it for some logicals and btst insns.
318 Add "break" and "trap" instructions.
320 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
322 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
324 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
326 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
327 relative load or add now depends upon whether the instruction is
330 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
332 * mn10200-dis.c: Finish writing disassembler.
333 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
334 Fix mask for "jmp (an)".
336 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
337 handle endianness issues for mn10300.
339 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
341 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
343 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
344 instruction. Fix opcode field for "movb (imm24),dn".
346 * mn10200-opc.c (mn10200_operands): Fix insertion position
349 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
351 * mn10200-opc.c: Create mn10200 opcode table.
352 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
353 but moving along nicely.
355 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
357 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
359 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
361 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
362 specifiers for fmovem* instructions.
364 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
366 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
368 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
370 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
373 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
375 * mn10300-opc.c: Add some comments explaining the various
378 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
380 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
382 * m68k-dis.c (print_insn_arg): Handle new < and > operand
385 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
386 operand specifiers in fmovm* instructions.
388 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
390 * ppc-opc.c (insert_li): Give an error if the offset has the two
391 least significant bits set.
393 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
395 * mips-dis.c (print_insn_mips16): Separate the instruction from
396 the arguments with a tab, not a space.
398 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
400 * mn10300-dis.c (disasemble): Finish conversion to '$' as
403 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
406 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
408 * configure: Rebuild with autoconf 2.12.
410 Add support for mips16 (16 bit MIPS implementation):
411 * mips16-opc.c: New file.
412 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
413 (mips16_reg_names): New static array.
414 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
415 after seeing a 16 bit symbol.
416 (print_insn_little_mips): Likewise.
417 (print_insn_mips16): New static function.
418 (print_mips16_insn_arg): New static function.
419 * mips-opc.c: Add jalx instruction.
420 * Makefile.in (mips16-opc.o): New target.
421 * configure.in: Use mips16-opc.o for bfd_mips_arch.
422 * configure: Rebuild.
424 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
426 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
427 operand specifiers in *save, *restore and movem* instructions.
429 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
432 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
433 register operands for immediate arithmetic, not, neg, negx, and
434 set according to condition instructions.
436 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
437 specifier of the effective-address operand in immediate forms of
438 arithmetic instructions. The specifier for the immediate operand
439 notes how and where the constant will be stored.
441 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
443 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
446 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
449 * mn10300-dis.c (disassemble): Prefix registers with '%'.
451 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
453 * mn10300-dis.c (disassemble): Handle register lists.
455 * mn10300-opc.c: Fix handling of register list operand for
456 "call", "ret", and "rets" instructions.
458 * mn10300-dis.c (disassemble): Print PC-relative and memory
459 addresses symbolically if possible.
460 * mn10300-opc.c: Distinguish between absolute memory addresses,
461 pc-relative offsets & random immediates.
463 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
465 (disassemble): Handle SPLIT and EXTENDED operands.
467 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
469 * mn10300-dis.c: Rough cut at printing some operands.
471 * mn10300-dis.c: Start working on disassembler support.
472 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
474 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
476 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
479 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
481 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
484 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
486 * mn10300-opc.c (mn10300_opcodes): Demand parens around
487 register argument is calls and jmp instructions.
489 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
491 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
492 getx operand. Fix opcode for mulqu imm,dn.
494 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
496 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
497 in MN10300_OPERAND_SPLIT operands for how many bits
498 appear in the basic insn word. Add IMM32_HIGH24,
499 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
500 (mn10300_opcodes): Use new operands as needed.
502 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
503 for bset, bclr, btst instructions.
504 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
506 * mn10300-opc.c (mn10300_operands): Remove many redundant
507 operands. Update opcode table as appropriate.
508 (IMM32): Add MN10300_OPERAND_SPLIT flag.
509 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
511 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
513 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
514 operands (for indexed load/stores). Fix bitpos for DI
515 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
516 few instructions that insert immediates/displacements in the
517 middle of the instruction. Add IMM8E for 8 bit immediate in
518 the extended part of an instruction.
519 (mn10300_operands): Use new opcodes as appropriate.
522 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
524 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
525 sequential so the assembler never parallelizes it with
529 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
531 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
532 a data/address register that appears in register field 0
533 and register field 1.
534 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
536 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
538 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
539 standard disassembly.
541 * alpha-opc.c (alpha_operands): Rearrange flags slot.
542 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
543 Recategorize PALcode instructions.
546 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
548 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
551 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
553 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
554 there are no operand types.
557 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
559 * v850-opc.c (D9_RELAX): Renamed from D9, all references
561 (v850_operands): Make sure D22 immediately follows D9_RELAX.
564 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
566 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
569 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
571 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
572 and sst.w instructions.
574 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
578 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
580 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
583 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
585 * ppc-opc.c (PPCPWR2): Define.
586 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
589 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
591 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
592 field for movhu instruction.
595 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
596 cast value to "long" not "signed long" to keep hpux10
600 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
602 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
605 * mn10300-opc.c (FMT*): Remove definitions.
607 * mn10300-opc.c (mn10300_opcodes): Fix destination register
608 for shift-by-register opcodes.
610 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
611 into [AD][MN][01] for encoding the position of the register
614 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
616 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
617 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
619 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
621 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
622 Fix various typos. Add "PAREN" operand.
624 (mn10300_opcodes): Surround all memory addresses with "PAREN"
625 operands. Fix several typos.
627 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
630 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
632 * mn10300-opc.c (FMT_XX): Renumber starting at one.
633 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
635 (mn10300_opcodes): Break opcode format out into its own field.
636 Update many operand fields to deal with signed vs unsigned
637 issues. Fix one or two typos in the "mov" instruction
638 opcode, mask and/or operand fields.
640 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
642 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
645 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
647 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
648 all opcodes. Very rough cut at operands for all opcodes.
650 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
653 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
655 * mn10200-opc.c, mn10300-opc.c: New files.
656 * mn10200-dis.c, mn10300-dis.c: New files.
657 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
658 * disassemble.c: Break mn10x00 support into 10200 and 10300
660 * configure.in: Likewise.
661 * configure: Rebuilt.
663 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
665 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
667 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
669 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
671 * disassemble (ARCH_mn10x00): Define.
672 (disassembler): Handle bfd_arch_mn10x00.
673 * configure.in: Recognize bfd_mn10x00_arch.
674 * configure: Rebuilt.
676 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
678 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
679 accordingly. Don't declare functions using op_rtn.
682 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
684 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
685 params to be more standard.
686 * (disassemble): Print absolute addresses and symbolic names for
687 branch and jump targets.
688 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
690 * (v850_opcodes): Add breakpoint insn.
693 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
695 * m68k-opc.c: Move the fmovemx data register cases before the
696 other cases, so that they get recognized before the data register
697 does gets treated as a degenerate register list.
699 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
701 * mips-opc.c: Add a case for "div" and "divu" with two registers
702 and a destination of $0.
704 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
706 * mips-dis.c (print_insn_arg): Add prototype.
707 (_print_insn_mips): Ditto.
709 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
711 * mips-dis.c (print_insn_arg): Print condition code registers as
714 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
716 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
719 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
721 * v850-dis.c (disassemble): Make static. Provide prototype.
723 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
725 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
728 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
730 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
731 ']' characters into the output stream.
732 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
733 Add "memop" field to all opcodes (for the disassembler).
734 Reorder opcodes so that "nop" comes before "mov" and "jr"
737 * v850-dis.c (print_insn_v850): Fix typo in last change.
739 * v850-dis.c (print_insn_v850): Properly handle disassembling
740 a two byte insn at the end of a memory region when the memory
741 region's size is only two byte aligned.
743 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
745 * v850-dis.c (v850_reg_names): Define.
746 (v850_sreg_names, v850_cc_names): Likewise.
747 (disassemble): Very rough cut at printing operands (unformatted).
749 * v850-opc.c (BOP_MASK): Fix.
750 (v850_opcodes): Fix mask for jarl and jr.
752 * v850-dis.c: New file. Skeleton for disassembler support.
753 * Makefile.in Remove v850 references, they're not needed here
754 and they weren't being sanitized away.
755 * configure.in: Add v850-dis.o when building v850 toolchains.
756 * configure: Rebuilt.
757 * disassemble.c (disassembler): Call v850 disassembler.
759 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
760 (insert_d8_6, extract_d8_6): New functions.
761 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
762 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
764 (IF4A, IF4B): Use "D7" instead of "D7S".
765 (IF4C, IF4D): Use "D8_7" instead of "D8".
766 (IF4E, IF4F): New. Use "D8_6".
767 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
768 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
770 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
771 (v850_operands): Change D16 to D16_15, use special insert/extract
772 routines. New new D16 that uses the generic insert/extract code.
773 (IF7A, IF7B): Use D16_15.
774 (IF7C, IF7D): New. Use D16.
775 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
777 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
778 message. Issue an error if the branch offset is odd.
780 * v850-opc.c: Add notes about needing special insert/extract
781 for all the load/store insns, except "ld.b" and "st.b".
783 * v850-opc.c (insert_d22, extract_d22): New functions.
784 (v850_operands): Use insert_d22 and extract_d22 for
786 (insert_d9): Fix range check.
788 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
790 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
791 and set bits field to D9 and D22 operands.
793 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
795 * v850-opc.c (v850_operands): Define SR2 operand.
796 (v850_opcodes): "ldsr" uses R1,SR2.
798 * v850-opc.c (v850_opcodes): Fix opcode specs for
799 sld.w, sst.b, sst.h, sst.w, and nop.
801 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
803 * v850-opc.c (v850_opcodes): Add null opcode to mark the
804 end of the opcode table.
808 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
810 * d10v-opc.c (pre_defined_registers): Added register pairs,
811 "r0-r1", "r2-r3", etc.
815 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
817 * v850-opc.c (v850_operands): Make I16 be a signed operand.
818 Create I16U for an unsigned 16bit mmediate operand.
819 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
821 * v850-opc.c (v850_operands): Define EP operand.
822 (IF4A, IF4B, IF4C, IF4D): Use EP.
824 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
825 with immediate operand, "movhi". Tweak "ldsr".
827 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
828 correct. Get sld.[bhw] and sst.[bhw] closer.
830 * v850-opc.c (v850_operands): "not" is a two byte insn
832 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
834 * v850-opc.c (v850_operands): D16 inserts at offset 16!
836 * v850-opc.c (two): Get order of words correct.
838 * v850-opc.c (v850_operands): I16 inserts at offset 16!
840 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
841 register source and destination operands.
842 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
844 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
845 same thinko in "trap" opcode.
847 * v850-opc.c (v850_opcodes): Add initializer for size field
850 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
851 Add D8 for 8-bit unsigned field in short load/store insns.
852 (IF4A, IF4D): These both need two registers.
853 (IF4C, IF4D): Define. Use 8-bit unsigned field.
854 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
855 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
856 for "ldsr" and "stsr".
857 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
860 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
861 short store word (sst.w).
863 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
865 * v850-opc.c (v850_operands): Added insert and extract fields,
866 pointers to functions that handle unusual operand encodings.
868 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
870 * v850-opc.c (v850_opcodes): Enable "trap".
872 * v850-opc.c (v850_opcodes): Fix order of displacement
873 and register for "set1", "clr1", "not1", and "tst1".
875 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
877 * v850-opc.c (v850_operands): Add "B3" support.
878 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
881 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
883 * v850-opc.c: Close unterminated comment.
885 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
887 * v850-opc.c (v850_operands): Add flags field.
888 (v850_opcodes): add move opcodes.
890 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
892 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
893 * configure: (bfd_v850v_arch) Add new case.
894 * configure.in: (bfd_v850_arch) Add new case.
895 * v850-opc.c: New file.
898 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
900 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
903 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
905 * d10v-opc.c: Add additional information to the opcode
906 table to help determinine which instructions can be done
910 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
912 * mpw-make.sed: Update editing of include pathnames to be
915 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
917 * arm-opc.h: Added "bx" instruction definition.
919 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
921 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
924 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
926 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
928 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
930 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
933 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
935 * makefile.vms: Update for alpha-opc changes.
937 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
939 * i386-dis.c (print_insn_i386): Actually return the correct value.
940 (ONE, OP_ONE): #ifdef out; not used.
943 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
945 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
946 Changed subi operand type to treat 0 as 16.
949 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
951 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
954 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
956 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
957 memory transfer instructions. Add new format string entries %h and %s.
958 * arm-dis.c: (print_insn_arm): Provide decoding of the new
962 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
964 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
965 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
968 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
970 * alpha-dis.c (print_insn_alpha_osf): Remove.
971 (print_insn_alpha_vms): Remove.
972 (print_insn_alpha): Make globally visible. Chose the register
973 names based on info->flavour.
974 * disassemble.c: Always return print_insn_alpha for the alpha.
977 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
979 * d10v-dis.c (dis_long): Handle unknown opcodes.
981 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
983 * d10v-opc.c: Changes to support signed and unsigned numbers.
984 All instructions with the same name that have long and short forms
985 now end in ".l" or ".s". Divs added.
986 * d10v-dis.c: Changes to support signed and unsigned numbers.
988 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
990 * d10v-dis.c: Change all functions to use info->print_address_func.
993 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
995 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
996 move ccr/sr insns more strict so that the disassembler only
997 selects them when the addressing mode is data register.
1000 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1001 * d10v-opc.c (pre_defined_registers): Declare.
1002 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1003 to pick a better name for the registers.
1006 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1008 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1009 operands for fexpand and fpmerge. From Christian Kuehnke
1010 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1012 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1014 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1015 print routine. Take new regnames and cpumask arguments.
1016 Kill the environment variable nonsense.
1017 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1018 (print_insn_alpha_vms): New function. Do VMS style regnames.
1019 * disassemble.c (disassembler): Test bfd flavour to pick
1020 between OSF and VMS routines. Default to OSF.
1022 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1024 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1025 * configure: Rebuild.
1026 * Makefile.in (install): Use @INSTALL_SHLIB@.
1029 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1031 * configure: (bfd_d10v_arch) Add new case.
1032 * configure.in: (bfd_d10v_arch) Add new case.
1033 * d10v-dis.c: New file.
1034 * d10v-opc.c: New file.
1035 * disassemble.c (disassembler) Add entry for d10v.
1038 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1040 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1041 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1043 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1045 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1046 distinguish between variants of the instruction set.
1047 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1048 distinguish between variants of the instruction set.
1050 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1052 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1053 the 8086 instruction set.
1054 * i386-dis.c: General cleanups. Make most things static. Add
1055 prototypes. Get rid of static variables aflags and dflags. Pass
1056 them as args (to almost everything).
1058 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1060 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1062 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1064 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1065 if the next arg is marked with SRC_IN_DST. Gross.
1067 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1068 we're looking for and find EXR.
1070 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1071 if we're looking for KBIT and we don't find it.
1073 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1076 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1077 3bit immediate operands.
1079 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1081 * Released binutils 2.7.
1083 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1084 <kkaempf@progis.ac-net.de>.
1086 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1088 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1090 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1092 * sparc-dis.c (print_insn_sparclite): New routine to print
1093 sparclite instructions.
1095 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1097 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1099 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1101 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1102 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1103 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1105 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1107 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1108 Use autoconf-set values.
1109 (docdir, oldincludedir): Removed.
1110 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1112 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1114 * alpha-opc.c: New file.
1115 * alpha-opc.h: Remove.
1116 * alpha-dis.c: Complete rewrite to use new opcode table.
1117 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1118 * configure: Rebuild with autoconf 2.10.
1119 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1120 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1122 (alpha-opc.o): New target.
1124 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1126 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1127 Set imm_added_to_rs1 even if the source and destination register
1130 * sparc-opc.c: Add some two operand forms of the wr instruction.
1132 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1134 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1137 * disassemble.c (disassembler): Handle H8/S.
1138 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1140 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1142 * sparc-opc.c: Add beq/teq as aliases for be/te.
1144 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1145 <sergei@msil.sps.mot.com>.
1147 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1149 * makefile.vms: New file.
1151 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1153 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1155 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1158 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1160 * i386-dis.c (OP_OFF): Call append_prefix.
1162 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1164 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1165 unsigned long to silence a warning from the Solaris PowerPC
1168 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1170 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1172 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1174 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1176 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1177 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1178 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1179 cpush, cpusha, cpull sparclet insns.
1181 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1183 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1185 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1187 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1188 Set F_FLOAT on other floating point instructions.
1190 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1192 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1194 (powerpc_opcodes): Add 860/821 specific SPRs.
1196 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1198 * configure.in: Permit --enable-shared to specify a list of
1199 directories. Set and substitute BFD_PICLIST.
1200 * configure: Rebuild.
1201 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1202 uses. Set to @BFD_PICLIST@.
1204 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1206 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1207 not "abs", which may be needed for the absolute in something
1208 like btst #0,@10:8. Print L_3 immediates separately from other
1209 immediates. Change ABSMOV reference to ABS8MEM.
1211 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1213 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1214 (current_arch_mask): New static global.
1215 (compute_arch_mask): New static function.
1216 (print_insn_sparc): Delete sparc_v9_p. New static local
1217 current_mach. Resort opcode table if current_mach changes.
1218 Generalize "insn not supported" test.
1219 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1220 Delete test for v9/!v9.
1221 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1223 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1224 (brfcx): Renamed to FBRX.
1225 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1226 coprocessor mnemonics are not supported on the sparclet).
1227 (condf): Renamed to CONDF.
1228 (SLCBCC2): Delete F_ALIAS flag.
1230 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1232 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1233 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1235 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1237 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1238 that the shared library version number is set correctly.
1240 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1242 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1243 Miles Bader <miles@gnu.ai.mit.edu>.
1244 * configure: Rebuild.
1246 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1248 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1251 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1253 * configure: Rebuild with autoconf 2.8.
1255 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1257 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1258 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1260 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1262 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1263 since they appear as targets in Makefile.in.
1264 * configure: Rebuild.
1266 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1268 * mpw-make.sed: Edit out shared library support bits.
1270 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1272 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1273 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1274 (sparc_opcodes): Add sparclet insns.
1275 (sparclet_cpreg_table): New static local.
1276 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1277 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1279 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1281 * i386-dis.c (index16): New static variable.
1282 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1284 (OP_indirE): Return result of OP_E.
1285 (OP_E): Check for 16 bit addressing mode, and disassemble
1286 correctly. Optimised 32 bit case a little. Don't print
1287 "(base,index,scale)" when sib specifies only an offset.
1289 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1291 * configure.in: Set and substitute SHLIB_DEP.
1292 * configure: Rebuild.
1293 * Makefile.in (SHLIB_DEP): New variable.
1294 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1295 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1296 COMMON_SHLIB, add them to piclist with appropriate modifications.
1297 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1298 here: just use piclist.
1300 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1302 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1303 (print_insn_sparc): Rewrite v9/not-v9 tests.
1304 (compare_opcodes): Likewise.
1305 * sparc-opc.c (MASK_<ARCH>): Define.
1306 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1307 (sparclet,v6notv9): Define.
1308 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1309 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1311 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1313 * configure.in: Call AC_PROG_CC before configure.host.
1314 * configure: Rebuild.
1316 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1318 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1320 * i386-dis.c (onebyte_has_modrm): New static array.
1321 (twobyte_has_modrm): New static array.
1322 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1324 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1326 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1329 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1331 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1334 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1336 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1337 m68010up, not just m68020up | cpu32.
1339 * Makefile.in (SONAME): New variable.
1340 ($(SHLINK)): Make a link to the transformed name, as well.
1341 (stamp-tshlink): New target.
1342 (install): Skip stamp-tshlink during install.
1344 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1346 * configure.in: Call AC_ARG_PROGRAM.
1347 * configure: Rebuild.
1348 * Makefile.in (program_transform_name): New variable.
1349 (install): Transform library name before installing it.
1351 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1353 * i960-dis.c (mem): Add HX dcinva instruction.
1355 Support for building as a shared library, based on patches from
1356 Alan Modra <alan@spri.levels.unisa.edu.au>:
1357 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1358 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1359 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1360 * configure: Rebuild.
1361 * Makefile.in (ALLLIBS): New variable.
1362 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1363 (COMMON_SHLIB, SHLINK): New variables.
1364 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1365 (STAGESTUFF): Remove variable.
1366 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1367 (stamp-piclist, piclist): New targets.
1368 ($(SHLIB), $(SHLINK)): New targets.
1369 ($(OFILES)): Depend upon stamp-picdir.
1370 (disassemble.o): Build twice if PICFLAG is set.
1371 (MOSTLYCLEAN): Add pic/*.o.
1372 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1373 (distclean): Remove pic and stamp-picdir.
1374 (install): Install shared libraries.
1375 (stamp-picdir): New target.
1377 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1379 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1380 Print unknown instruction as "unknown", rather than in hex.
1382 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1384 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1386 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1388 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1390 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1392 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1393 when necessary. From Ulrich Drepper
1394 <drepper@myware.rz.uni-karlsruhe.de>.
1396 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1398 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1399 sparc_num_opcodes. Update architecture enum values.
1400 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1401 (sparc_opcode_lookup_arch): New function.
1402 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1403 (sparc_opcodes): Add v9a shutdown insn.
1405 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1407 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1408 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1410 (print_insn_sparc64): Deleted.
1411 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1414 * sparc-opc.c (architecture_pname): Add v9a.
1416 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1418 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1419 incorrectly defined as 0x16 when it should be 0x15.
1420 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1421 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1422 excb (exception barrier) which is defined in the Alpha
1423 Architecture Handbook version 2.
1424 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1425 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1426 disassembled as or, for example.
1428 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1430 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1431 (_print_insn_mips): Change i from int to unsigned int.
1433 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1435 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1436 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1438 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1440 * i386-dis.c: Added Pentium Pro instructions.
1442 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1444 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1447 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1449 * sh-opc.h (sh_nibble_type): Added REG_B.
1450 (sh_arg_type): Added A_REG_B.
1451 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1453 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1455 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1457 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1459 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1461 * Makefile.in (distclean): Remove stamp-h. From Ronald
1462 F. Guilmette <rfg@monkeys.com>.
1464 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1466 From David Mosberger-Tang <davidm@azstarnet.com>:
1467 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1470 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1472 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1473 (sh_table): Added many SH3 opcodes.
1474 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1476 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1478 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1479 (subco,subco.): Mark this PPC, not PPCCOM.
1481 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1483 * configure: Rebuild with autoconf 2.7.
1485 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1487 * configure: Rebuild with autoconf 2.6.
1489 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1491 * configure.in: Sort list of architectures. Accept but do nothing
1492 for alliant, convex, pyramid, romp, and tahoe.
1494 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1496 * a29k-dis.c (print_special): Change num to unsigned int.
1498 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1500 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1503 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1505 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1506 * configure: Rebuilt.
1508 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1510 * configure.in: Add case for bfd_i860_arch.
1511 * configure: Rebuild.
1513 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1515 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1516 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1517 (NEXTDOUBLE): Likewise.
1518 (print_insn_m68k): Don't match fmoveml if there is more than one
1519 register in the list.
1520 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1522 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1524 * m68k-opc.c: Use #W rather than #w.
1525 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1527 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1529 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1530 and likewise for all the dbxx opcodes.
1532 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1534 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1536 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1538 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1539 the VR4100 specific instructions to the mips_opcodes structure.
1541 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1543 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1544 ugly Metrowerks bug in CW6, is fixed in CW7.
1546 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1548 * ppc-opc.c (whole file): Add flags for common/any support.
1550 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1552 * Makefile.in (BISON): Remove macro.
1553 (FLAGS_TO_PASS): Remove BISON.
1555 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1557 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1559 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1560 instructions that take no args by looking at the match mask.
1561 (print_insn_arg): Always print "%" before register names.
1562 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1563 [case '_']: Don't print "@#" before address.
1564 [case 'J']: Use "%s" as format string, not register name.
1565 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1567 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1569 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1572 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1574 From David Mosberger-Tang <davidm@azstarnet.com>
1576 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1577 (alpha_insn_set): added definitions for VAX floating point
1578 instructions (Unix compilers don't generate these, but handcoded
1579 assembly might still use them).
1581 * alpha-dis.c (print_insn_alpha): added support for disassembling
1582 the miscellaneous instructions in the Alpha instruction set.
1584 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1586 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1587 no longer create sysdep.h, sed ppc-opc.c to work around a
1588 serious Metrowerks C bug.
1589 * mpw-make.in: Remove.
1590 * mpw-make.sed: New file, used by mpw-configure to edit
1591 Makefile.in into an MPW makefile.
1593 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1595 * Makefile.in (maintainer-clean): New synonym for realclean.
1597 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1599 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1600 which use '0', '1', and '2' instead. Specify the proper size for
1601 a pmove immediate operand. Correct the pmovefd patterns to be
1602 moves to a register, not from a register.
1603 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1605 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1607 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1608 %psr, %wim, %tbr as F_NOTV9.
1610 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1612 * Makefile.in (Makefile): Just rebuild Makefile when running
1614 (config.h, stamp-h): New targets.
1615 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1616 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1617 rebuilding config.h.
1618 * configure: Rebuild.
1620 * mips-opc.c: Change unaligned loads and stores with "t,A"
1621 operands to use "t,A(b)".
1623 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1625 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1627 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1629 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1630 until 3 instead of until 2.
1632 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1634 * Makefile.in (ALL_CFLAGS): Define.
1635 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1636 (MOSTLYCLEAN): Add config.log.
1637 (distclean): Don't remove config.log.
1638 * configure.in: Substitute HDEFINES.
1639 * configure: Rebuild.
1641 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1643 * sh-opc.h (sh_arg_type): Add F_FR0.
1644 (sh_table, case fmac): Add F_FR0 as first argument.
1646 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1648 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1650 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1652 * sparc-dis.c: Remove all references to NO_V9.
1654 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1656 * aclocal.m4: Just include ../bfd/aclocal.m4.
1657 * configure: Rebuild.
1659 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1661 * sparc-dis.c (X_DISP19): Define.
1662 (print_insn, case 'G'): Use it.
1663 (print_insn, case 'L'): Sign extend displacement.
1665 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1667 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1668 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1669 host_makefile_frag or frags.
1670 * aclocal.m4: New file.
1671 * configure: Rebuild.
1672 * Makefile.in (INSTALL): Set to @INSTALL@.
1673 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1674 (INSTALL_DATA): Set to @INSTALL_DATA@.
1676 (AR_FLAGS): Set to rc rather than qc.
1677 (CC): Define as @CC@.
1678 (CFLAGS): Set to @CFLAGS@.
1679 (@host_makefile_frag@): Remove.
1680 (config.status): Remove dependency upon @frags@.
1682 * configure.in: ../bfd/config.bfd now just sets shell variables.
1683 Use them rather than looking through target Makefile fragments.
1684 * configure: Rebuild.
1686 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1688 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1690 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1692 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1693 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1696 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1697 (lookup_{name,value}): New functions.
1698 (prefetch_table): New static local.
1699 (sparc_{encode,decode}_prefetch): New functions.
1700 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1702 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1704 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1707 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1709 * sh-dis.c: Correct comment on first line of file.
1711 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1713 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1715 * sparc-opc.c (asi, membar): New static locals.
1716 (sparc_{encode,decode}_{asi,membar}): New functions.
1717 (sparc_opcodes, membar insn): Fix.
1718 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1719 Support decoding of membar masks.
1722 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1724 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1726 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1728 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1729 and likewise for the other branches. Add bhs as an alias for bcc,
1730 and likewise for the size variants. Add dbhs as an alias for
1733 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1735 * sh-opc.h (FP sts instructions): Update to match reality.
1737 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1739 * m68k-dis.c: (fpcr_names): Add % before all register names.
1740 (reg_names): Likewise.
1741 (print_insn_arg): Don't explicitly print % before register names.
1742 Add % before register names in static array names. In case 'r',
1743 print data registers as `@(Dn)', not `Dn@'. When printing a
1744 memory address, don't print @# before it.
1745 (print_indexed): Change base_disp and outer_disp from int to
1746 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1747 syntax. Sign extend 8 byte displacement correctly.
1748 (print_base): Print using MIT syntax. Print zpc when appropriate.
1749 Change parameter disp from int to bfd_vma.
1751 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1754 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1756 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1757 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1758 * sh-opc.h (sh_arg_type): Add new operand types.
1759 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1761 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1763 * Makefile.in (distclean): Remove generated file config.h.
1765 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1767 * Makefile.in (distclean): Remove generated file config.h.
1769 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1771 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1773 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1775 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1776 rather than numopcodes. Use m68k_opcodes rather than removed
1777 opcode function. Don't check F_ALIAS.
1778 (print_insn_arg): Change first parameter to be const char *.
1779 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1780 (m68k-opc.o): New target.
1781 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1782 * configure: Rebuild.
1784 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1786 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1787 (opcode_bits, opcode_hash_table): New variables.
1788 (opcodes_initialized): Renamed from opcodes_sorted.
1789 (build_hash_table): New function.
1790 (is_delayed_branch): Use hash table.
1791 (print_insn): Renamed from print_insn_sparc, made static.
1792 Build and use hash table. If !sparc64, ignore sparc64 insns,
1793 and vice-versa if sparc64.
1794 (print_insn_sparc, print_insn_sparc64): New functions.
1795 (compare_opcodes): Move sparc64 opcodes to end.
1796 Print commutative insns with constant second.
1797 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1799 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1801 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1802 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1803 avoids printing a delay slot in a delay slot.
1804 * sh-opc.h (sh_table): Fully bracket last entry.
1806 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1808 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1810 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1812 * configure.in: Get host_makefile_frag from ${srcdir}.
1814 * configure.in: Autoconfiscated. Check for string[s].h. Create
1815 config.h from config.in. Don't set up sysdep.h link.
1816 * sysdep.h: New file.
1817 * configure, config.in: New files, generated from configure.in.
1818 * Makefile.in: Updated to be processed autoconf-style.
1819 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1820 (Makefile): Depend on config.status.
1821 (config.status): New rule.
1822 * configure.bat: Update Makefile substitutions.
1824 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1826 * mips-opc.c (L1): Define.
1827 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1828 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1831 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1833 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1834 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1835 have multiple add units but only a single logical unit.
1837 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1838 shifted by 18, without any insertion or extraction function.
1839 (insert_cr, extract_cr): Remove.
1842 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1844 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1847 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1849 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1852 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1854 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1855 * sh-opc.h: Add copyright.
1857 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1859 * Makefile.in (crunch-m68k): Delete extra target accidentally
1860 checked in a while ago.
1862 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1864 * sh-opc.h (sh_table): Add SH3 support.
1866 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1868 * sh-opc.h: Added bsrf and braf.
1870 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1872 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1873 bogus [ls]fm{ea,fd} patterns.
1875 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1876 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1877 initialize it from memory. Make function static.
1878 (print_insn_{big,little}_arm): New functions.
1879 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1880 the correct endianness.
1883 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1885 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1886 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1889 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1891 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1894 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1896 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1897 17th, so that it builds again using GCC as the compiler.
1899 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1901 * mips-dis.c (print_insn_little_mips): Cast return value from
1902 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1903 expects an unsigned long, and that might be fewer words of
1904 argument storage (e.g., if bfd_vma is long long on a 32-bit
1906 (print_insn_big_mips): Likewise with bfd_getb32 value.
1907 (_print_insn_mips): Now static.
1909 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1911 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1912 gcc memory hog problem with initializer is fixed.
1915 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1917 * arc-opc.c (NULL): Define.
1918 (arc_operands, insn fields u,s): Delete.
1919 (arc_operands, insn fields a,b,c): Mark as signed.
1920 (arc_opcodes): No longer const, links computed at run-time.
1921 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1922 suffixes that affect the insn code.
1923 (arc_opcodes): Resort table to macros are first.
1924 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1925 (arc_opcodes, st [b] entry): Likewise.
1926 (arc_opcodes, st [b,d] entry): Fix mask, value.
1927 (arc_reg_names): Add entries for r29, r30, r31, r60.
1928 (opcode_map, icode_map): New static globals.
1929 (arc_opcode_init_tables): Initialize them.
1930 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1931 (insert_shimmoffset): Signal error if register present.
1933 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1936 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1938 Merge in support for Mac MPW as a host.
1939 (Old change descriptions retained for informational value.)
1941 * mpw-config.in (archname): Compute from the config.
1942 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1944 * mpw-config.in (target_arch): Compute from canonical target.
1945 (m68k, mips, powerpc, sparc): Add architectures.
1946 * mpw-make.in (disassemble.c.o): Add.
1947 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1949 * mpw-config.in (BFD_MACHINES): Set to a default value.
1950 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1952 * mpw-make.in (CSEARCH): Add extra-include to search path.
1954 * mpw-config.in (varargs.h): Don't create.
1955 (sysdep.h): Create using forward-include.
1956 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1958 * mpw-config.in: New file, MPW version of configure.in.
1959 * mpw-make.in: New file, MPW version of Makefile.in.
1962 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1964 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1965 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1966 (print_insn_*): Pass bfd mach number, not opcode version.
1967 * arc-opc.c (arc_get_opcode_mach): New function.
1970 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1972 * alpha-dis.c (print_insn_alpha): Put empty statement after
1975 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1977 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1978 (low_sign_extend): Likewise.
1979 (get_field): Delete unused function.
1980 (set_field, deposit_14, deposit_21): Likewise.
1982 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1984 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1987 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1989 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1991 * alpha-opc.h (OSF_ASMCODE): define
1992 print pal-code names as defined in App C of the
1993 Alpha Architecture Reference Manual
1995 * alpha-dis.c: cleaned up output
1996 print stylized code forms as defined in App A.4.3 of the
1997 Alpha Architecture Reference Manual
1999 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2001 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2003 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2006 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2008 * m68k-dis.c (opcode): New function. Returns address of opcode
2009 table entry given index, even if the opcode table was split to
2010 work around gcc bugs.
2011 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2013 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2014 (reg_names): Now const.
2015 (print_insn_arg): Arrays cacheFieldName and names now const.
2016 (print_indexed): Array scales now const.
2019 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2021 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2022 (print_insn_arc_{host,graphics,audio}): Likewise.
2023 (print_insn): Add prototype.
2024 (arc_get_disassembler): New arg `big_p'. Return little or big
2025 print fn accordingly.
2026 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2027 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2028 (arc_opval_supported): Likewise.
2029 * disassemble.c (disassembler): Pass big endian flag to
2030 arc_get_disassembler.
2033 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2035 * ppc-opc.c: Sort recently added instructions by minor opcode
2036 number within major opcode number.
2038 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2040 * hppa-dis.c: Include libhppa.h.
2042 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2044 * mips-opc.c: Change dli to use M_DLI, and add dla.
2046 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2048 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2051 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2053 * arc-dis.c (arc_get_disassembler): Change argument to int,
2054 one of bfd_mach_arc_xxx. All callers updated.
2057 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2059 * mips-opc.c: Add r4650 mul instruction.
2061 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2063 * mips-opc.c: Add uld and usd macros for unaligned double load and
2066 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2068 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2069 mfdcr, mtdcr, icbt, iccci.
2072 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2074 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2075 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2076 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2077 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2078 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2079 (insert_absaddr): New function.
2081 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2083 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2084 New argument `cpu', pass it to arc_opcode_init_tables.
2085 Document byte order dependencies. Ignore unsupported insns.
2086 (arc_get_disassembler): New function.
2087 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2088 print_insn_arc_audio): New functions.
2089 * arc-opc.c (MULTSHIFT operand): Delete.
2090 (UNSIGNED, SATURATION): New operands.
2091 (mac, mul, mul64, mulu64): New insns.
2092 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2093 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2094 (host,graphics,audio extended and auxiliary regs): Define.
2095 (ss, sc, mh, ml): New suffixes.
2096 (arc_opcode_supported, arc_opval_supported): New functions.
2097 (insert_multshift, extract_multshift): Deleted.
2098 * disassemble.c (disassembler, case bfd_arch_arc): Call
2099 arc_get_disassembler to get disassembler routine.
2102 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2104 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2105 signed char fields to shorts, more portable.
2107 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2109 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2110 char fields as signed chars, since they may have negative values.
2112 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2114 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2115 (mycroft@netbsd.org).
2117 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2119 From "Logg, Ed" <elogg@ea.com>:
2120 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2121 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2124 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2126 * ppc-opc.c: Changes based on patch from David Edelsohn
2127 <edelsohn@mhpcc.edu>.
2128 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2131 (insert_tbr): New static function.
2132 (extract_tbr): New static function.
2133 (XFXFXM_MASK, XFXM): Define.
2134 (XSPRBAT_MASK, XSPRG_MASK): Define.
2135 (powerpc_opcodes): Add instructions to access special registers by
2136 name. Add mtcr and mftbu.
2138 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2140 * mips-opc.c (P3): Define.
2141 (mips_opcodes): Add mad and madu.
2143 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2145 * configure.in: Add W65 support.
2146 * disassemble.c: Likewise.
2147 * w65-opc.h, w65-dis.c: New files.
2149 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2151 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2155 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2157 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2159 * arc-opc.c (extract_reladdr): New function.
2160 (insert_reladdr): Store address right-shifted by 2.
2163 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2165 * mips-opc.c: Add dli as a synonym for li.
2168 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2170 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2172 (extraction fns): Insn argument now array of two words. Return pointer
2173 to value's table entry. All uses changed.
2174 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2175 (insert_multshift, extract_multshift): New fns.
2176 (arc_operands): Add support for cache bypass suffix. Add support for
2177 predefined aux regs. Modifier bits moved to flags field.
2178 (arc_opcodes): Likewise.
2179 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2180 New insn rlc. Update to syntax in programmer's manual.
2181 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2182 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2184 (arc_opcode_init_tables): New argument to indicate cpu type.
2185 (insert_reg): Handle predefined aux regs.
2186 (extract_reg): Likewise.
2187 (lookup_register): New fn.
2188 * arc-dis.c (arc_condition_codes): Deleted.
2189 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2190 Clean up modifier handling. Handle predefined aux regs.
2193 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2195 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2196 print something for reserved opcode values, even if it won't
2199 * mips-dis.c (_print_insn_mips): When initializing, shift right
2200 and mask, to avoid sign extension problems on the Alpha.
2202 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2206 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2208 * configure.in: Add ARC support.
2209 * disassemble.c: Likewise.
2210 * arc-dis.c, arc-opc.c: New files.
2213 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2215 * sh-opc.h (mov.l gbr): Get direction right.
2216 * sh-dis.c (print_insn_shx): New function.
2217 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2218 print opcodes with right byte order.
2220 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2222 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2223 to avoid conflicts with getopt.
2225 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2227 * hppa-dis.c (print_insn_hppa): Read the instruction using
2228 bfd_getb32, so that it works on a little endian or 64 bit host.
2229 Remove unused local variable op.
2231 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2233 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2234 addu does not work correctly if -mips3.
2236 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2238 * a29k-dis.c (print_special): Add special register names defined
2239 on 29030, 29040 and 29050.
2240 (print_insn): Handle new operand type 'I'.
2242 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2244 * Makefile.in (INSTALL): Use top level install.sh script.
2246 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2248 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2249 that it works on a little endian host.
2251 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2253 * configure.in: Use ${config_shell} when running config.bfd.
2255 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2257 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2259 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2261 * a29k-dis.c (print_insn): Print the opcode.
2263 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2265 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2267 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2269 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2271 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2273 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2274 which store a value into memory.
2276 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2278 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2279 * arm-dis.c, arm-opc.h: New files.
2281 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2283 * Makefile.in (ns32k-dis.o): Add dependency.
2284 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2285 string, not as array of chars.
2287 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2289 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2291 * sparc-opc.c: Added sparclite extended FP operations, and
2292 versions of v9 impdep* instructions permitting specification of
2295 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2297 * i960-dis.c (reg_names): Now const.
2298 (struct sparse_tabent): New type, copied from array type in mem
2300 (ctrl): Local static array ctrl_tab now const.
2301 (cobr): Local static array cobr_tab now const.
2302 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2303 static variable mem_tab no longer explicitly initialized. Changed
2304 mem_init to const array of struct sparse_tabent.
2305 (reg): Local static variable reg_tab no longer explicitly
2306 initialized. Changed reg_init to const array of struct
2308 (ea): Local static array scale_tab now const.
2310 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2313 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2315 * configure.bat: the disassember needs to be enabled for
2316 "objdump -d" to work in djgpp.
2318 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2320 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2321 (invalid_float): Enabled general version, doesn't require running
2322 on ns32k host. Changed to take char* argument, and test for
2323 explicitly specified sizes, instead of using sizeof() on host CPU
2325 (INVALID_FLOAT): Cast first argument.
2326 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2327 list_P032, list_M032): Now const.
2328 (optlist, list_search): Made appropriate arguments now point to
2330 (print_insn_arg): Changed static array of one-character-string
2331 pointers into a static const array of characters; fixed sprintf
2332 statement accordingly.
2334 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2336 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2337 from distribution. A ns32k-dis.c from a previous distribution has
2338 been brought up to date and supports the new interface.
2340 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2342 * configure.in: add bfd_ns32k_arch target support.
2344 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2345 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2347 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2349 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2352 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2354 * h8300-dis.c, mips-dis.c: Don't use true and false.
2356 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2358 * configure.in: Change --with-targets to --enable-targets.
2360 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2362 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2363 opcodes to the first instruction with that opcode, to speed
2364 disassembly of large files. From ralphc@pyramid.com (Ralph
2367 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2369 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2371 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2373 * configure.bat: update to latest makefile.in
2375 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2377 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2378 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2379 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2380 slot insn is in a delay slot.
2381 * z8k-opc.h: (resflg): Fix patterns.
2382 * h8500-opc.h Fix CR insn patterns.
2384 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2386 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2387 "cmpl" before POWER versions, so that gas -many uses them.
2389 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2391 * disassemble.c: New file.
2392 * Makefile.in (OFILES): Add disassemble.o.
2393 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2394 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2395 binutils/configure.in.
2397 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2398 opcode being examined.
2400 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2402 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2403 (insert_ral, insert_ram, insert_ras): New functions.
2404 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2405 RAS for store with update.
2407 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2409 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2410 (edelsohn@npac.syr.edu).
2412 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2414 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2417 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2419 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2421 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2423 * ppc-opc.c (powerpc_operands): The signedp field has been
2424 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2425 instead. Add new operand SISIGNOPT.
2426 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2427 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2428 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2431 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2433 * i386-dis.c (struct private): Renamed to dis_private. `private'
2434 is a reserved word for dynix cc.
2436 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2438 * configure.in: Change error message to refer to bfd/config.bfd
2439 rather than bfd/configure.in.
2441 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2443 * ppc-opc.c: Define POWER2 as short alias flag.
2444 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2447 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2449 * i960-dis.c (print_insn_i960): Don't read a second word for
2450 opcodes 0, 1, 2 and 3.
2452 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2454 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2456 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2458 * m68881-ext.c: Removed; no longer used.
2459 * Makefile.in: Changed accordingly.
2461 * m68k-dis.c (ext_format_68881): Don't declare.
2462 (print_insn_m68k): If an instruction uses place 'i', it uses at
2463 least four fixed bytes.
2464 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2465 extended float, convert to double using floatformat_to_double, not
2466 ieee_extended_to_double, and fetch the data before converting it.
2468 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2470 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2471 davidj@ICSI.Berkeley.EDU (David Johnson).
2473 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2475 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2476 PowerPC uses bdnz[l][a].
2478 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2480 * dis-buf.c, i386-dis.c: Include sysdep.h.
2482 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2484 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2486 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2487 by Motorola PowerPC 601 with PPC_OPCODE_601.
2488 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2489 Disassemble Motorola PowerPC 601 instructions as well as normal
2490 PowerPC instructions.
2492 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2494 * i960-dis.c (reg, mem): Just use a static array instead of
2497 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2499 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2500 condition name index if this is for a negated condition.
2502 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2503 Floating point format for 'H' operand is backwards from normal
2504 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2505 operands (fmpyadd and fmpysub), handle bizarre register
2506 translation correctly for single precision format.
2508 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2509 or 'I' operands if the next format specifier is 'M' (fcmp
2510 condition completer).
2512 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2514 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2515 single number giving a bitmask for the MB and ME fields of an M
2516 form instruction. Change NB to accept 32, and turn it into 0;
2517 also turn 0 into 32 when disassembling. Seperated SH from NB.
2518 (insert_mbe, extract_mbe): New functions.
2519 (insert_nb, extract_nb): New functions.
2520 (SC_MASK): Mask out SA and LK bits.
2521 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2522 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2523 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2524 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2525 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2526 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2527 (powerpc_macros): Define table of macro definitions.
2528 (powerpc_num_macros): Define.
2530 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2531 if PPC_OPERAND_NEXT is set.
2533 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2535 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2536 char. Retrieve contents using bfd_getl32 instead of shifting.
2538 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2540 * ppc-opc.c: New file. Opcode table for PowerPC, including
2541 opcodes for POWER (RS/6000).
2542 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2543 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2544 (CFILES): Add ppc-dis.c.
2545 (ppc-dis.o, ppc-opc.o): New targets.
2546 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2548 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2550 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2551 No space before 'u', 'f', or 'N'.
2553 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2555 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2556 farther than we should.
2558 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2560 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2562 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2564 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2566 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2567 needs it, to prevent reading past the end of a section.
2569 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2571 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2572 Removed t,A case for la; always use t,A(b) case.
2574 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2576 From Ted Lemen <mellon@pepper.ncd.com>
2577 * mips-dis.c (print_insn_arg): Handle 'k'.
2578 * mips-opc.c: Make cache use k, not t.
2580 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2582 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2583 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2584 FLOAT_FORMAT_CODE to put out floating point register names.
2586 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2588 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2590 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2592 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2594 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2596 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2597 larger than 32. Moved dsxx32 variants first for disassembler.
2599 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2601 * z8kgen.c, z8k-opc.h: Add full lda information.
2603 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2605 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2606 movb instructions. Any necessary space will be emitted by
2607 the code to handle nullification completers.
2609 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2611 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2613 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2615 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2616 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2618 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2620 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2622 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2624 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2625 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2627 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2629 * m88k-dis.c (m88kdis): comment change. Remove space after
2631 (printop): handle new arg types DEC and XREG for m88110.
2633 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2635 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2636 type for absolute branch addresses. Delete special
2637 "ble" and "be" code in 'W' operand code.
2639 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2641 * mips-opc.c: Set hazard information correctly for branch
2642 likely instructions.
2644 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2646 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2647 info->fprintf_func for printing and info->print_address_func for
2650 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2652 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2654 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2656 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2657 Corrected second case of "b" for disassembler.
2659 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2661 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2662 to BFD swapping routines to correspond to BFD name changes.
2664 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2666 * mips-opc.c: Change div machine instruction to be z,s,t rather
2667 than s,t. Change div macro to be d,v,t rather than d,s,t.
2668 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2669 rem and remu which generates only the corresponding div
2670 instruction. This is for compatibility with the MIPS assembler,
2671 which only generates the simple machine instruction when an
2672 explicit destination of $0 is used.
2673 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2675 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2677 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2678 WR_31 hazard for bal, bgezal, bltzal.
2680 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2682 * hppa-dis.c (print_insn_hppa): Use print function
2683 from within the disassemble_info, not fprintf_filtered.
2685 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2687 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2688 Law, law@cs.utah.edu.)
2690 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2692 * mips-opc.c ("absu"): Removed.
2695 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2697 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2698 Changed hazard information to distinguish between memory load
2699 delays and coprocessor load delays.
2701 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2703 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2705 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2707 * configure.in: Don't pass cpu to config.bfd.
2709 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2711 * m88k-dis.c (m88kdis): Make class unsigned.
2713 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2715 * alpha-dis.c (print_insn_alpha): One branch format case was
2716 missing the instruction name.
2718 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2720 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2721 Add the arch-specific auxiliary files.
2722 (OFILES): Remove the arch-specific auxiliary files
2723 and use BFD_MACHINES instead of DIS_LIBS.
2724 * configure.in: Set BFD_MACHINES based on --with-targets option.
2726 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2728 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2731 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2733 * sparc-opc.c: Change CONST to const to deal with gcc
2734 -Dconst=__const -traditional.
2736 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2738 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2739 coprocessor instructions out of #if 0, and made them use new
2742 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2744 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2746 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2748 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2749 instruction, for use by the disassembler.
2751 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2752 hand-coded sign extensions that depended on 32-bit host ints.
2753 FIXME, we still depend on big-endian host bitfield ordering.
2754 (sparc_print_insn): Set the insn_info_valid field, and the
2755 other fields that describe the instruction being printed.
2757 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2759 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2760 `jmp' instead of just one of them.
2762 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2764 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2765 (fput_fp_reg_r): Renamed from fput_reg_r.
2766 (fput_fp_reg): New function.
2767 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2769 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2771 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2773 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2775 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2777 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2778 don't output a space.
2780 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2782 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2784 * mips-opc.c: New file, containing opcode table from
2785 ../include/opcode/mips.h.
2786 * Makefile.in: Add it.
2788 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2790 * m88k-dis.c: New file, moved in from gdb and changed to use the
2791 new dis-asm.h disassembler interface.
2792 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2793 (m88k-dis.o): New target.
2795 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2797 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2798 argument string const char * to correspond to opcode/mips.h.
2800 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2802 * mips-dis.c: Updated to account for name changes in new version
2804 * Makefile.in: Added header file dependencies.
2806 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2808 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2810 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2812 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2813 extend, rather than shifts.
2815 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2817 * Makefile.in: Undo 15 June change.
2819 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2821 * m68k-dis.c (print_insn_arg): Change return value to byte count
2823 * m68k-dis.c: Re-write to detect invalid operands before
2824 printing anything, so we can handle this the same way we
2825 handle invalid opcodes.
2827 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2829 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2831 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2833 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2836 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2838 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2840 * configure.in: Do make sysdep.h link.
2841 * Makefile.in: Search ../include. Don't search ../bfd.
2843 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2845 Changes from Jeff Law, law@cs.utah.edu:
2846 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2847 Do not print a space before the completers specified by
2850 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2852 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2853 defined, since gdb has been fixed.
2855 Changes from Jeff Law, law@cs.utah.edu:
2856 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2857 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2858 be a *disassemble_info, not a *FILE.
2859 * hppa-dis.c: Support 'd', '!', and 'a'.
2860 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2861 * hppa-dis.c: Delete cases which are no longer needed.
2863 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2865 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2867 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2869 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2872 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2874 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2875 * configure.in: No longer need to configure to get sysdep.h.
2877 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2879 * Patches from Jeffrey Law <law@cs.utah.edu>.
2880 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2881 templates for 1.1 FP computational instructions.
2883 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2885 * h8500-dis.c (print_insn_h8500): Address argument is type
2887 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2890 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2891 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2893 * sparc-dis.c (compare_opcodes): Move static declaration to
2896 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2898 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2899 instruction, remove unimp hack from 'l' argument.
2901 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2903 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2906 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2908 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2909 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2912 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2914 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2915 arrays of string pointers to 2-d arrays of chars, to save
2918 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2920 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2921 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2923 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2925 * hppa-dis.c: New file from Utah, adapted to new disassembler
2927 * Makefile.in: Include it.
2929 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2931 * sh-dis.c, sh-opc.h: New files.
2933 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2935 * alpha-dis.c, alpha-opc.h: New files.
2937 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2939 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2942 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2944 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2946 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2948 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2951 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2953 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2954 and double percent signs a few places.
2956 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2958 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2959 Use info->print_address_func not print_address.
2961 * dis-buf.c (generic_print_address): New function.
2963 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2965 * Makefile.in: Add sparc-dis.c.
2966 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2968 Add `add' instruction to the set that get checked
2969 for a preceding `sethi' in order to print an absolute address.
2970 * (print_insn): Disassembly prefers real instructions.
2971 (is_delayed_branch): Speed up.
2972 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2973 Still missing some float ops, and needs testing.
2974 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2975 F_ALIAS. Use printf, not fprintf, when not passing a file
2977 (compare_opcodes): Check that identical instructions have
2978 identical opcodes, complain otherwise.
2981 * Include reg_names.
2983 Use dis-asm.h/read_memory_func interface.
2985 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2987 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2988 deliberately return non-zero to setjmp from longjmp. Otherwise
2989 this code fails to compile.
2991 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2993 * m68k-dis.c: Fix prototype for fetch_arg().
2995 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2997 * dis-buf.c: New file, for new read_memory_func interface.
2998 Makefile.in (OFILES): Include it.
2999 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3000 Use new read_memory_func interface.
3002 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3004 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3005 * h8500-opc.h: Fix couple of opcodes.
3007 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3009 * Makefile.in: add dvi & installcheck targets
3011 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3013 * Makefile.in: Update for h8500-dis.c.
3015 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3017 * h8500-dis.c, h8500-opc.h: New files
3019 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3021 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3022 ../include/dis-asm.h.
3023 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3024 and ../gdb/m68k-pinsn.c).
3025 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3026 and ../gdb/i386-pinsn.c).
3027 * m68881-ext.c: New file. Moved definition of
3028 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3029 * Makefile.in: Adjust for new files.
3030 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3031 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3032 can be dis-assembled.
3034 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3036 * mips-dis.c (print_insn_arg): Now returns void.
3038 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3040 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3041 files that use the macros.
3043 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3045 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3046 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3047 (CFILES): Added mips-dis.c.
3049 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3051 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3052 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3054 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3056 * Makefile.in: Improve *clean rules.
3057 * configure.in: Allow a default host.
3059 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3061 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3062 files include other sysdep files
3064 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3066 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3068 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3070 * configure.in: For host support, use ../bfd/configure.host
3071 so it stays in sync with the ../bfd/hosts database.
3073 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3075 * configure.in: use cpu-vendor-os triple instead of nested cases
3077 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3079 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3080 *always* the wrong one.
3082 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3084 * z8kgen.c: added copyright info
3086 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3088 * z8k-dis.c (unparse_instr): prettier tabs
3089 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3091 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3093 * configure.in: Add ncr* configuration.
3094 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3095 picayune ANSI compilers happy.
3097 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3099 * configure.in (i386): Make i386 and i486 synonymous for now.
3100 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3102 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3104 * Makefile.in (install): Fix typo.
3106 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3108 * Makefile.in (make): Remove obsolete crud.
3109 (sparc-opc.o): Avoid Sun Make VPATH bug.
3111 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3113 * Makefile.in: since there are no SUBDIRS, remove rule and
3114 references of subdir_do.
3116 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3118 * Makefile.in (install): Get the library name right here too.
3119 Don't install bfd.h, since it's unrelated to this library. No
3120 subdirs to recurse into, either.
3121 (CFILES): The source file has a .c suffix, not .o.
3123 * sparc-opc.c: New file, moved from BFD.
3124 * Makefile.in (OFILES): Build it.
3126 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3128 * z8k-dis.c: fixed forward refferences of some declarations.
3130 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3132 * Makefile.in: get the name of the library right
3134 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3136 * z8k-dis.c: knows how to disassemble z8k stuff
3137 * z8k-opc.h: new file full of z8000 opcodes
3141 version-control: never
projects / deliverable / binutils-gdb.git / blob