1 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
3 * mips-opc.c: Three op mult is not an ISA insn.
5 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
7 * mips-opc.c: Fix formatting.
9 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
11 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
12 than assuming that char is signed. Explicitly sign extend 16 bit
13 values, rather than assuming that short is 16 bits.
14 (OP_sI, OP_J, OP_DIR): Likewise.
17 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
19 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
23 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
25 * v850-opc.c: Fix typo in comment.
27 * v850-dis.c (disassemble): Add test of processor type when
30 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
32 * configure.in: Use a diversion to set enable_shared before the
36 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
38 * m68k-opc.c (TBL1): Use ! rather than `.
39 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
41 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
43 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
45 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
47 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
50 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
51 * aclocal.m4: Rebuild with new libtool.
55 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
57 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
60 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
62 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
64 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
66 * v850-opc.c (v850_opcodes): Further rearrangements.
69 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
71 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
74 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
76 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
79 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
81 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
83 * mips16-opc.c: Added mips16 sdbbp.
86 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
88 * v850-opc.c: Initialise processors field of v850_opcode structure.
91 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
93 Merge changes from Martin Hunt:
95 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
97 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
98 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
99 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
101 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
103 * d30v-dis.c (print_insn): First operand of d*i (delayed
104 branch) instructions is relative.
106 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
107 (d30v_operand_table): Add IMM6S3 type.
108 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
110 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
111 and cmp instructions.
113 * d30v-opc.c: Correct entries for repeat*, and sat*.
114 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
115 types. Correct several formats.
117 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
119 * d30v-opc.c (pre_defined_registers): Change control registers.
121 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
122 SHORT_C2. Manual was incorrect.
124 * d30v-dis.c (lookup_opcode): Return value now indicates
125 if an opcode has a short and a long form. Used for deciding
126 to append a ".s" or ".l".
127 (print_insn): Append a ".s" to an instruction if it is
128 the short form and ".l" if it is a long form. Do not append
129 anything if the instruction has only one possible size.
131 * d30v-opc.c: Change mulx2h to require an even register.
132 New form: SHORT_A2; a SHORT_A form that needs an even
133 register as the first operand.
135 * d30v-dis.c (print_insn_d30v): Fix problem where the last
136 instruction was not being disassembled if there were an odd
137 number of instructions.
139 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
143 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
145 * v850-dis.c (disassemble): Improved display of register lists.
148 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
150 * sparc-opc.c (sparc_opcodes): Fix assembler args to
151 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
152 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
153 fandnot1s, fandnot2s.
155 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
157 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
159 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
161 * cgen-asm.c (cgen_parse_address): New argument resultp.
163 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
165 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
167 * mn10200-dis.c (disassemble): PC relative instructions are
168 relative to the next instruction, not the current instruction.
170 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
172 * v850-dis.c (disassemble): Only signed extend values that are not
173 returned by extract functions.
174 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
176 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
178 * v850-opc.c: Update comments. Remove use of
179 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
181 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
183 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
185 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
187 * configure: Rebuilt with latest devo autoconf for NT support.
189 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
191 * v850-dis.c (disassemble): Use curly brace syntax for register
194 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
195 where r0 is being used as a destination register.
198 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
200 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
204 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
206 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
207 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
208 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
209 Add insns to access SGR and DBR.
210 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
213 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
215 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
218 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
220 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
221 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
224 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
226 * configure (cgen_files): Add support for v850e target.
227 * configure.in (cgen_files): Add support for v850e target.
229 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
231 * configure (cgen_files): Add support for v850eq target.
232 * configure.in (cgen_files): Add support for v850eq target.
235 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
237 * configure.in (bfd_arc_arch): Add.
238 * configure: Rebuild.
239 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
240 * Makefile.in: Rebuild.
241 * arc-dis.c, arc-opc.c: New files.
242 * disassemble.c (ARCH_all): Define ARCH_arc.
243 (disassembler): Add ARC support.
245 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
248 * v850-dis.c (disassemble): Add support for v850EQ instructions.
250 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
251 (v850_opcodes): Add v850EQ instructions.
253 * v850-dis.c (disassemble): Add support for v850E instructions.
255 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
256 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
257 insert_spe, extract_spe): New Functions.
258 (v850_opcodes): Add v850E instructions.
261 * v850-opc.c: Reorganised and re-layed out to improve readability
264 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
266 * configure: Rebuild with autoconf 2.12.1.
268 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
270 * aclocal.m4, configure: Rebuild with new automake patches.
272 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
274 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
275 * acinclude.m4: Just include acinclude.m4 from BFD.
276 * aclocal.m4, configure: Rebuild.
278 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
280 * Makefile.am: New file, based on old Makefile.in.
281 * acconfig.h: New file.
282 * acinclude.m4: New file.
283 * stamp-h.in: New file.
284 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
285 Removed shared library handling; now handled by libtool. Replace
286 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
287 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
288 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
289 handling in AC_OUTPUT.
290 * dep-in.sed: Change .o to .lo.
291 * Makefile.in: Now built with automake.
292 * aclocal.m4: Now built with aclocal.
293 * config.in, configure: Rebuild.
295 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
297 * mips-opc.c: Fix typo/thinko in "eret" instruction.
300 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
302 * mips-opc.c: Fix coding of mtsa.
305 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
307 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
309 * sparc-dis.c (sorted_opcodes): New static local.
310 (struct opcode_hash): `opcode' is pointer to const element.
311 (build_hash): First arg is now table of sorted pointers.
312 (print_insn_sparc): Sort opcodes by sorting table of pointers.
313 (compare_opcodes): Update.
315 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
317 * cgen-opc.c: #include <ctype.h>.
318 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
319 Handle case insensitive hashing.
320 (hash_keyword_value): Change type of `value' to unsigned int.
322 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
324 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
325 precision FP, mark it as such. Likewise for double precision
326 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
329 (mips_builtin_opcodes): Remove non-existant r5900 instructions
333 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
335 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
336 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
339 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
341 * ppc-opc.c (extract_nsi): make unsigned expression signed before
343 (UNUSED): remove one level of parens, so MSVC doesn't choke on
344 nesting depth when all the macros are expanded.
346 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
348 * sparc-opc.c: The fcmp v9a instructions take an integer register
349 as a destination, not a floating point register. From Christian
350 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
352 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
354 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
355 syntax. From Roman Hodek
356 <rnhodek@faui22c.informatik.uni-erlangen.de>.
358 * i386-dis.c (twobyte_has_modrm): Fix pand.
360 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
362 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
364 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
366 * arm-dis.c: Add prototypes for arm_decode_shift and
369 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
371 * mips-opc.c: Add r3900 insns.
373 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
375 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
376 print delay slot instructions on the same line. When using a PC
377 relative load, add a comment with the value being loaded if it can
380 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
382 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
383 to pushS/popS for segment regs and byte constant so that
384 pushw/popw printed when in 16 bit data mode.
386 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
387 print cbtw, cwtd in 16 bit data mode.
388 * i386-dis.c (putop): extra case W to support above.
390 * i386-dis.c (print_insn_x86): print addr32 prefix when given
391 address size prefix in 16 bit address mode.
393 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
395 * sh-dis.c: Reindent. Rename local variable fprintf to
398 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
400 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
402 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
404 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
406 * mips16-opc.c (mip16_opcodes): same.
408 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
410 * m68k-opc.c (moveb): Change $d to %d.
412 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
414 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
415 (twobyte_has_modrm): Likewise.
417 (OP_MMX, OP_EM, OP_MS): New static functions.
419 * i386-dis.c: Revert patch of April 4. The output now matches
422 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
424 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
427 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
429 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
431 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
433 * Makefile.in (install): Depend upon installdirs.
434 (installdirs): New target.
436 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
438 From Thomas Graichen <graichen@rzpd.de>:
439 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
440 * configure: Rebuild.
442 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
444 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
445 Delete string{,s}.h support.
447 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
449 * cgen-asm.c (cgen_parse_operand_fn): New global.
450 (cgen_parse_{{,un}signed_integer,address}): Update call to
451 cgen_parse_operand_fn.
452 (cgen_init_parse_operand): New function.
453 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
454 from cgen_asm_init_parse.
455 (m32r_cgen_assemble_insn): New operand `errmsg'.
456 Delete call to as_bad, return error message to caller.
457 (m32r_cgen_asm_hash_keywords): #if 0 out.
459 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
461 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
463 [case 'J']: Fix typo in register name.
465 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
467 * configure.in: Substitute SHLIB_LIBS.
468 * configure: Rebuild.
469 * Makefile.in (SHLIB_LIBS): New variable.
470 ($(SHLIB)): Use $(SHLIB_LIBS).
472 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
474 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
476 * cgen-opc.c (hash_keyword_name): Improve algorithm.
478 * disassemble.c (disassembler): Handle m32r.
480 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
482 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
483 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
484 * Makefile.in (CFILES): Add them.
485 (ALL_MACHINES): Add them.
486 (dependencies): Regenerate.
487 * configure.in (cgen_files): New variable.
488 (bfd_m32r_arch): Add entry.
489 * configure: Regenerate.
491 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
493 * configure.in: Correct file names for bfd_mn10[23]00_arch.
494 * configure: Rebuild.
496 * Makefile.in: Rebuild dependencies.
498 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
500 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
503 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
505 * Branched binutils 2.8.
507 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
509 * m10200-dis.c: Rename from mn10200-dis.c.
510 * m10200-opc.c: Rename from mn10200-opc.c.
511 * m10300-dis.c: Rename from mn10300-dis.c
512 * m10300-opc.c: Rename from mn10300-opc.c.
513 * Makefile.in: Update accordingly.
515 * mips16-opc.c: Add mul and dmul macros.
517 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
519 * makefile.vms: Update CFLAGS, add clean target.
521 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
523 * mips-opc.c: Add "wait". From Ralf Baechle
524 <ralf@gnu.ai.mit.edu>.
526 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
527 * configure, config.in: Rebuild.
528 * sysdep.h: Include <stdlib.h> if it exists.
529 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
531 * Makefile.in: Rebuild dependencies.
533 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
535 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
536 Andrew Bray <andy@madhouse.demon.co.uk>.
538 * mips-opc.c: Add cast when setting mips_opcodes.
540 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
542 * v850-dis.c (disassemble): Fix sign extension problem.
543 * v850-opc.c (extract_d*): Fix sign extension problems to make
544 disassembly calculate branch offsets correctly.
546 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
548 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
550 * mips-opc.c: Add dctr and dctw.
553 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
555 * d30v-dis.c (print_insn): Change the way signed constants
558 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
560 * Makefile.in (BFD_H): New variable.
561 (HFILES): New variable.
562 (CFILES): Add all C files.
563 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
564 Delete old dependencies, and build new ones.
565 * dep-in.sed: New file.
567 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
569 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
571 start-sanitize-coldfire
572 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
574 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
577 end-sanitize-coldfire
578 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
580 * mn10200-opc.c: Change "trap" to "syscall".
581 * mn10300-opc.c: Add new "syscall" instruction.
583 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
585 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
586 mulul insns on the coldfire.
588 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
590 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
591 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
592 (print_insn_little_arm): Likewise.
594 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
596 Based on patches from H.J. Lu <hjl@lucon.org>:
597 * i386-dis.c (fetch_data): Add prototype.
598 * m68k-dis.c (fetch_data): Add prototype.
599 (dummy_print_address): Add prototype. Make static.
600 * ppc-opc.c (valid_bo): Add prototype.
601 * sparc-dis.c (build_hash_table): Add prototype.
602 (is_delayed_branch, compute_arch_mask): Add prototypes.
603 (print_insn_sparc): Make several local variables const.
604 (compare_opcodes): Change arguments to const PTR. Add prototype.
605 * sparc-opc.c (arg): Change name field to be const.
606 (lookup_name, lookup_value): Add prototypes. Change table and
607 name parameters to be const.
608 (sparc_encode_asi): Change name parameter to be const.
609 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
610 (sparc_encode_sparclet_cpreg): Likewise.
611 (sparc_decode_asi): Change return type to be const.
612 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
613 (sparc_decode_sparclet_cpreg): Likewise.
615 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
617 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
618 Solaris doesn't like the combined options, and the -f is
620 (stamp-tshlink, install): Likewise.
622 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
624 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
627 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
629 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
631 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
633 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
636 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
638 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
641 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
643 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
645 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
647 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
650 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
652 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
653 floatformat_to_double to make portable.
654 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
657 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
659 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
660 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
662 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
664 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
665 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
668 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
670 * tic80-opc.c (LSI_SCALED): Renamed from this ...
671 (OFF_SL_BR_SCALED): ... to this, and added the flag
672 TIC80_OPERAND_BASEREL to the flags word.
673 (tic80_opcodes): Replace all occurances of LSI_SCALED with
677 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
679 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
680 Change mips_opcodes from const array to a pointer,
681 and change bfd_mips_num_opcodes from const int to int,
682 so that we can increase the size of the mips opcodes table
686 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
688 * tic80-opc.c (tic80_predefined_symbols): Revert change to
689 store BITNUM values in the table in one's complement form
690 to match behavior when assembler is given a raw numeric
691 value for a BITNUM operand.
692 * tic80-dis.c (print_operand_bitnum): Ditto.
696 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
698 * d30v-opc.c: Removed references to FLAG_X.
701 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
703 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
706 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
708 * Makefile.in: Added d30v object files.
709 * configure: (bfd_d30v_arch) Rebuilt.
710 * configure.in: (bfd_d30v_arch) Added new case.
711 * d30v-dis.c: New file.
712 * d30v-opc.c: New file.
713 * disassemble.c (disassembler) Add entry for d30v.
717 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
719 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
720 representations for the floating point BITNUM values.
722 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
724 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
725 in the table in one's complement form, as they appear in the
727 (tic80_symbol_to_value): Use macros to access predefined
729 (tic80_value_to_symbol): Ditto.
730 (tic80_next_predefined_symbol): New function.
731 * tic80-dis.c (print_operand_bitnum): Remove code that did
732 one's complement for BITNUM values.
736 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
738 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
741 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
743 * makefile.vms: Remove 8 bit characters. Update to latest
746 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
748 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
750 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
752 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
753 (IMM24_PCREL): Likewise.
755 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
757 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
758 address for an extended PC relative instruction that is not a
761 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
763 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
767 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
769 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
770 (tic80_opcodes): Sort entries so that long immediate forms
771 come after short immediate forms, making it easier for
772 assembler to select the right one for a given operand.
775 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
777 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
779 (print_insn_mips16): Likewise.
782 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
784 * mips-opc.c: add r5900.
788 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
790 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
791 a symbol class that restricts translation to just that
792 class (general register, condition code, etc).
794 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
796 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
797 and REG_DEST_E for register operands that have to be
798 an even numbered register. Add REG_FPA for operands that
799 are one of the floating point accumulator registers.
800 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
801 (tic80_opcodes): Change entries that need even numbered
802 register operands to use the new operand table entries.
803 Add "or" entries that are identical to "or.tt" entries.
806 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
808 * mips16-opc.c: Add new cases of exit instruction for
810 * mips-dis.c (print_mips16_insn_arg): Display floating point
811 registers in operands of exit instruction. Print `$' before
812 register names in operands of entry and exit instructions.
815 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
817 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
818 pairs for all predefined symbols recognized by the assembler.
819 Also used by the disassembling routines.
820 (tic80_symbol_to_value): New function.
821 (tic80_value_to_symbol): New function.
822 * tic80-dis.c (print_operand_control_register,
823 print_operand_condition_code, print_operand_bitnum):
824 Remove private tables and use tic80_value_to_symbol function.
827 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
829 * d10v-dis.c (print_operand): Change address printing
830 to correctly handle PC wrapping. Fixes PR11490.
832 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
834 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
837 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
839 * mips-dis.c (print_insn_mips16): Set insn_info information.
840 (print_mips16_insn_arg): Likewise.
842 * mips-dis.c (print_insn_mips16): Better handling of an extend
843 opcode followed by an instruction which can not be extended.
845 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
847 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
848 coldfire moveb instruction to not allow an address register as
849 destination. Although the documentation does not indicate that
850 this is invalid, experiments uncovered unexpected behavior.
851 Added a comment explaining the situation. Thanks to Andreas
852 Schwab for pointing this out to me.
855 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
857 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
858 entries are presorted so that entries with the same mnemonic are
859 adjacent to each other in the table. Sort the entries for each
860 instruction so that this is true.
863 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
865 * m68k-dis.c: Include <libiberty.h>.
866 (print_insn_m68k): Sort the opcode table on the most significant
867 nibble of the opcode.
870 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
872 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
873 "vsub", "vst", "xnor", and "xor" instructions.
874 (V_a1): Renamed from V_a, msb of accumulator reg number.
875 (V_a0): Add macro, lsb of accumulator reg number.
877 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
879 * tic80-dis.c (print_insn_tic80): Broke excessively long
880 function up into several smaller ones and arranged for
881 the instruction printing function to be callable recursively
882 to print vector instructions that have both a load and a
883 math instruction packed into a single opcode.
884 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
885 to explain why it comes after the other vector opcodes.
888 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
890 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
891 move insns to handle immediate operands.
893 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
895 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
896 fix operand mask in the "moveml" entries for the coldfire.
899 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
901 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
902 New macros for building vector instruction opcodes.
903 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
904 FMT_LI, which were unused. The field is now a flags field.
905 Remove some opcodes that are possible, but illegal, such
906 as long immediate instructions with doubles for immediate
907 values. Add "vadd" and "vld" instructions.
909 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
911 * tic80-opc.c (tic80_operands): Reorder some table entries to make
912 the order more logical. Move the shift alias instructions ("rotl",
913 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
914 interspersed with the regular sr.x and sl.x instructions. Add
915 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
916 "sub", "subu", "swcr", and "trap".
918 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
920 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
921 (OFF_SL_PC): Renamed from OFF_SL.
922 (OFF_SS_BR): New operand type for base relative operand.
923 (OFF_SL_BR): New operand type for base relative operand.
924 (REG_BASE): New operand type for base register operand.
925 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
926 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
927 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
929 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
930 10 char field, padded with spaces on rhs, rather than a string
931 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
932 than old TIC80_OPERAND_RELATIVE. Add support for new
933 TIC80_OPERAND_BASEREL flag bit.
935 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
937 * tic80-dis.c (print_insn_tic80): Print floating point operands
939 * tic80-opc.c (SPFI): Add single precision floating point
940 immediate operand type.
941 (ROTATE): Add rotate operand type for shifts.
942 (ENDMASK): Add for shifts.
943 (n): Macro for the 'n' bit.
944 (i): Macro for the 'i' bit.
945 (PD): Macro for the 'PD' field.
946 (P2): Macro for the 'P2' field.
947 (P1): Macro for the 'P1' field.
948 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
952 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
954 * mn10200-dis.c (disassemble): Mask off unwanted bits after
955 adding in current address for pc-relative operands.
958 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
960 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
961 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
962 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
963 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
964 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
965 REG_BASE_M_SI, REG_BASE_M_LI respectively.
966 (REG_SCALED, LSI_SCALED): New operand types.
967 (E): New macro for 'E' bit at bit 27.
968 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
969 opcodes, including the various size flavors (b,h,w,d) for
970 the direct load and store instructions.
972 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
974 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
976 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
977 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
978 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
979 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
980 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
981 masks with "MASK_* & ~M_*" to get the M bit reset.
982 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
984 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
986 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
987 correctly. Add support for printing TIC80_OPERAND_BITNUM and
988 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
990 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
991 CC, SICR, and LICR table entries.
992 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
993 "bcnd", and "brcr" opcodes.
996 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
998 * ppc-opc.c (powerpc_operands): Make comment match the
999 actual fields (no shift field).
1000 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1001 start-sanitize-tic80
1002 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1003 partial implementation, work in progress.
1004 * tic80-opc.c (tic80_operands): Begin construction operands table.
1005 (tic80_opcodes): Continue populating opcodes table and start
1006 filling in the operand indices.
1007 (tic80_num_opcodes): Add this.
1010 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1012 * m68k-opc.c: Add #B case for moveq.
1014 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1016 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1017 before they are used.
1019 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1021 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1022 for "breakpoint" instruction.
1024 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1026 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1027 (dep): Use ALL_CFLAGS rather than CFLAGS.
1029 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1031 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1034 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1036 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1037 start-sanitize-tic80
1038 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1041 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1043 * mips16-opc.c: Add "abs".
1045 start-sanitize-tic80
1046 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1048 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1049 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1050 (disassembler): Add bfd_arch_tic80 support to set disassemble
1051 to print_insn_tic80.
1052 * tic80-dis.c (print_insn_tic80): Add stub.
1054 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1056 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1057 * configure: Regenerate with autoconf.
1058 * tic80-dis.c: Add file.
1059 * tic80-opc.c: Add file.
1062 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1064 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1066 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1068 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1069 (mn10200_opcodes): Use it for some logicals and btst insns.
1070 Add "break" and "trap" instructions.
1072 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1074 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1076 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1078 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1079 relative load or add now depends upon whether the instruction is
1082 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1084 * mn10200-dis.c: Finish writing disassembler.
1085 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1086 Fix mask for "jmp (an)".
1088 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1089 handle endianness issues for mn10300.
1091 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1093 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1095 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1096 instruction. Fix opcode field for "movb (imm24),dn".
1098 * mn10200-opc.c (mn10200_operands): Fix insertion position
1101 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1103 * mn10200-opc.c: Create mn10200 opcode table.
1104 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1105 but moving along nicely.
1107 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1109 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1111 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1113 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1114 specifiers for fmovem* instructions.
1116 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1118 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1120 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1122 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1125 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1127 * mn10300-opc.c: Add some comments explaining the various
1130 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1132 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1134 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1137 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1138 operand specifiers in fmovm* instructions.
1140 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1142 * ppc-opc.c (insert_li): Give an error if the offset has the two
1143 least significant bits set.
1145 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1147 * mips-dis.c (print_insn_mips16): Separate the instruction from
1148 the arguments with a tab, not a space.
1150 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1152 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1155 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1158 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1160 * configure: Rebuild with autoconf 2.12.
1162 Add support for mips16 (16 bit MIPS implementation):
1163 * mips16-opc.c: New file.
1164 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1165 (mips16_reg_names): New static array.
1166 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1167 after seeing a 16 bit symbol.
1168 (print_insn_little_mips): Likewise.
1169 (print_insn_mips16): New static function.
1170 (print_mips16_insn_arg): New static function.
1171 * mips-opc.c: Add jalx instruction.
1172 * Makefile.in (mips16-opc.o): New target.
1173 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1174 * configure: Rebuild.
1176 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1178 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1179 operand specifiers in *save, *restore and movem* instructions.
1181 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1184 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1185 register operands for immediate arithmetic, not, neg, negx, and
1186 set according to condition instructions.
1188 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1189 specifier of the effective-address operand in immediate forms of
1190 arithmetic instructions. The specifier for the immediate operand
1191 notes how and where the constant will be stored.
1193 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1195 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1198 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1201 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1203 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1205 * mn10300-dis.c (disassemble): Handle register lists.
1207 * mn10300-opc.c: Fix handling of register list operand for
1208 "call", "ret", and "rets" instructions.
1210 * mn10300-dis.c (disassemble): Print PC-relative and memory
1211 addresses symbolically if possible.
1212 * mn10300-opc.c: Distinguish between absolute memory addresses,
1213 pc-relative offsets & random immediates.
1215 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1217 (disassemble): Handle SPLIT and EXTENDED operands.
1219 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1221 * mn10300-dis.c: Rough cut at printing some operands.
1223 * mn10300-dis.c: Start working on disassembler support.
1224 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1226 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1228 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1230 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1232 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1234 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1236 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1237 register argument is calls and jmp instructions.
1239 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1241 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1242 getx operand. Fix opcode for mulqu imm,dn.
1244 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1246 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1247 in MN10300_OPERAND_SPLIT operands for how many bits
1248 appear in the basic insn word. Add IMM32_HIGH24,
1249 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1250 (mn10300_opcodes): Use new operands as needed.
1252 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1253 for bset, bclr, btst instructions.
1254 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1256 * mn10300-opc.c (mn10300_operands): Remove many redundant
1257 operands. Update opcode table as appropriate.
1258 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1259 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1261 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1263 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1264 operands (for indexed load/stores). Fix bitpos for DI
1265 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1266 few instructions that insert immediates/displacements in the
1267 middle of the instruction. Add IMM8E for 8 bit immediate in
1268 the extended part of an instruction.
1269 (mn10300_operands): Use new opcodes as appropriate.
1271 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1273 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1274 sequential so the assembler never parallelizes it with
1277 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1279 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1280 a data/address register that appears in register field 0
1281 and register field 1.
1282 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1284 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1286 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1287 standard disassembly.
1289 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1290 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1291 Recategorize PALcode instructions.
1293 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1295 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1297 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1299 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1300 there are no operand types.
1302 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1304 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1306 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1308 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1310 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1312 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1314 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1315 and sst.w instructions.
1317 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1320 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1322 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1325 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1327 * ppc-opc.c (PPCPWR2): Define.
1328 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1331 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1333 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1334 field for movhu instruction.
1336 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1337 cast value to "long" not "signed long" to keep hpux10
1340 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1342 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1345 * mn10300-opc.c (FMT*): Remove definitions.
1347 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1348 for shift-by-register opcodes.
1350 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1351 into [AD][MN][01] for encoding the position of the register
1354 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1356 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1357 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1359 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1361 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1362 Fix various typos. Add "PAREN" operand.
1363 (MEM, MEM2): Define.
1364 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1365 operands. Fix several typos.
1367 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1370 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1372 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1373 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1375 (mn10300_opcodes): Break opcode format out into its own field.
1376 Update many operand fields to deal with signed vs unsigned
1377 issues. Fix one or two typos in the "mov" instruction
1378 opcode, mask and/or operand fields.
1380 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1382 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1383 m68851 wasn't reset.
1385 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1387 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1388 all opcodes. Very rough cut at operands for all opcodes.
1390 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1393 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1395 * mn10200-opc.c, mn10300-opc.c: New files.
1396 * mn10200-dis.c, mn10300-dis.c: New files.
1397 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1398 * disassemble.c: Break mn10x00 support into 10200 and 10300
1400 * configure.in: Likewise.
1401 * configure: Rebuilt.
1403 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1405 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1407 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1409 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1411 * disassemble (ARCH_mn10x00): Define.
1412 (disassembler): Handle bfd_arch_mn10x00.
1413 * configure.in: Recognize bfd_mn10x00_arch.
1414 * configure: Rebuilt.
1416 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1418 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1419 accordingly. Don't declare functions using op_rtn.
1421 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1423 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1424 params to be more standard.
1425 * (disassemble): Print absolute addresses and symbolic names for
1426 branch and jump targets.
1427 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1429 * (v850_opcodes): Add breakpoint insn.
1431 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1433 * m68k-opc.c: Move the fmovemx data register cases before the
1434 other cases, so that they get recognized before the data register
1435 does gets treated as a degenerate register list.
1437 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1439 * mips-opc.c: Add a case for "div" and "divu" with two registers
1440 and a destination of $0.
1442 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1444 * mips-dis.c (print_insn_arg): Add prototype.
1445 (_print_insn_mips): Ditto.
1447 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1449 * mips-dis.c (print_insn_arg): Print condition code registers as
1452 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1454 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1456 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1458 * v850-dis.c (disassemble): Make static. Provide prototype.
1460 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1462 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1465 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1467 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1468 ']' characters into the output stream.
1469 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1470 Add "memop" field to all opcodes (for the disassembler).
1471 Reorder opcodes so that "nop" comes before "mov" and "jr"
1472 comes before "jarl".
1474 * v850-dis.c (print_insn_v850): Fix typo in last change.
1476 * v850-dis.c (print_insn_v850): Properly handle disassembling
1477 a two byte insn at the end of a memory region when the memory
1478 region's size is only two byte aligned.
1480 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1482 * v850-dis.c (v850_reg_names): Define.
1483 (v850_sreg_names, v850_cc_names): Likewise.
1484 (disassemble): Very rough cut at printing operands (unformatted).
1486 * v850-opc.c (BOP_MASK): Fix.
1487 (v850_opcodes): Fix mask for jarl and jr.
1489 * v850-dis.c: New file. Skeleton for disassembler support.
1490 * Makefile.in Remove v850 references, they're not needed here.
1491 * configure.in: Add v850-dis.o when building v850 toolchains.
1492 * configure: Rebuilt.
1493 * disassemble.c (disassembler): Call v850 disassembler.
1495 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1496 (insert_d8_6, extract_d8_6): New functions.
1497 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1498 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1500 (IF4A, IF4B): Use "D7" instead of "D7S".
1501 (IF4C, IF4D): Use "D8_7" instead of "D8".
1502 (IF4E, IF4F): New. Use "D8_6".
1503 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1504 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1506 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1507 (v850_operands): Change D16 to D16_15, use special insert/extract
1508 routines. New new D16 that uses the generic insert/extract code.
1509 (IF7A, IF7B): Use D16_15.
1510 (IF7C, IF7D): New. Use D16.
1511 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1513 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1514 message. Issue an error if the branch offset is odd.
1516 * v850-opc.c: Add notes about needing special insert/extract
1517 for all the load/store insns, except "ld.b" and "st.b".
1519 * v850-opc.c (insert_d22, extract_d22): New functions.
1520 (v850_operands): Use insert_d22 and extract_d22 for
1522 (insert_d9): Fix range check.
1524 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1526 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1527 and set bits field to D9 and D22 operands.
1529 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1531 * v850-opc.c (v850_operands): Define SR2 operand.
1532 (v850_opcodes): "ldsr" uses R1,SR2.
1534 * v850-opc.c (v850_opcodes): Fix opcode specs for
1535 sld.w, sst.b, sst.h, sst.w, and nop.
1537 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1539 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1540 end of the opcode table.
1542 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1544 * d10v-opc.c (pre_defined_registers): Added register pairs,
1545 "r0-r1", "r2-r3", etc.
1547 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1549 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1550 Create I16U for an unsigned 16bit mmediate operand.
1551 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1553 * v850-opc.c (v850_operands): Define EP operand.
1554 (IF4A, IF4B, IF4C, IF4D): Use EP.
1556 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1557 with immediate operand, "movhi". Tweak "ldsr".
1559 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1560 correct. Get sld.[bhw] and sst.[bhw] closer.
1562 * v850-opc.c (v850_operands): "not" is a two byte insn
1564 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1566 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1568 * v850-opc.c (two): Get order of words correct.
1570 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1572 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1573 register source and destination operands.
1574 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1576 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1577 same thinko in "trap" opcode.
1579 * v850-opc.c (v850_opcodes): Add initializer for size field
1582 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1583 Add D8 for 8-bit unsigned field in short load/store insns.
1584 (IF4A, IF4D): These both need two registers.
1585 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1586 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1587 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1588 for "ldsr" and "stsr".
1589 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1592 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1593 short store word (sst.w).
1595 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1597 * v850-opc.c (v850_operands): Added insert and extract fields,
1598 pointers to functions that handle unusual operand encodings.
1600 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1602 * v850-opc.c (v850_opcodes): Enable "trap".
1604 * v850-opc.c (v850_opcodes): Fix order of displacement
1605 and register for "set1", "clr1", "not1", and "tst1".
1607 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1609 * v850-opc.c (v850_operands): Add "B3" support.
1610 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1613 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1615 * v850-opc.c: Close unterminated comment.
1617 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1619 * v850-opc.c (v850_operands): Add flags field.
1620 (v850_opcodes): add move opcodes.
1622 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1624 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1625 * configure: (bfd_v850v_arch) Add new case.
1626 * configure.in: (bfd_v850_arch) Add new case.
1627 * v850-opc.c: New file.
1629 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1631 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1633 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1635 * d10v-opc.c: Add additional information to the opcode
1636 table to help determinine which instructions can be done
1639 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1641 * mpw-make.sed: Update editing of include pathnames to be
1644 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1646 * arm-opc.h: Added "bx" instruction definition.
1648 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1650 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1652 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1654 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1656 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1658 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1660 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1662 * makefile.vms: Update for alpha-opc changes.
1664 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1666 * i386-dis.c (print_insn_i386): Actually return the correct value.
1667 (ONE, OP_ONE): #ifdef out; not used.
1669 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1671 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1672 Changed subi operand type to treat 0 as 16.
1674 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1676 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1679 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1681 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1682 memory transfer instructions. Add new format string entries %h and %s.
1683 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1686 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1688 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1689 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1691 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1693 * alpha-dis.c (print_insn_alpha_osf): Remove.
1694 (print_insn_alpha_vms): Remove.
1695 (print_insn_alpha): Make globally visible. Chose the register
1696 names based on info->flavour.
1697 * disassemble.c: Always return print_insn_alpha for the alpha.
1699 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1701 * d10v-dis.c (dis_long): Handle unknown opcodes.
1703 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1705 * d10v-opc.c: Changes to support signed and unsigned numbers.
1706 All instructions with the same name that have long and short forms
1707 now end in ".l" or ".s". Divs added.
1708 * d10v-dis.c: Changes to support signed and unsigned numbers.
1710 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1712 * d10v-dis.c: Change all functions to use info->print_address_func.
1714 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1716 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1717 move ccr/sr insns more strict so that the disassembler only
1718 selects them when the addressing mode is data register.
1720 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1721 * d10v-opc.c (pre_defined_registers): Declare.
1722 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1723 to pick a better name for the registers.
1725 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1727 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1728 operands for fexpand and fpmerge. From Christian Kuehnke
1729 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1731 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1733 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1734 print routine. Take new regnames and cpumask arguments.
1735 Kill the environment variable nonsense.
1736 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1737 (print_insn_alpha_vms): New function. Do VMS style regnames.
1738 * disassemble.c (disassembler): Test bfd flavour to pick
1739 between OSF and VMS routines. Default to OSF.
1741 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1743 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1744 * configure: Rebuild.
1745 * Makefile.in (install): Use @INSTALL_SHLIB@.
1747 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1749 * configure: (bfd_d10v_arch) Add new case.
1750 * configure.in: (bfd_d10v_arch) Add new case.
1751 * d10v-dis.c: New file.
1752 * d10v-opc.c: New file.
1753 * disassemble.c (disassembler) Add entry for d10v.
1755 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1757 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1758 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1760 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1762 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1763 distinguish between variants of the instruction set.
1764 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1765 distinguish between variants of the instruction set.
1767 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1769 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1770 the 8086 instruction set.
1771 * i386-dis.c: General cleanups. Make most things static. Add
1772 prototypes. Get rid of static variables aflags and dflags. Pass
1773 them as args (to almost everything).
1775 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1777 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1779 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1781 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1782 if the next arg is marked with SRC_IN_DST. Gross.
1784 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1785 we're looking for and find EXR.
1787 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1788 if we're looking for KBIT and we don't find it.
1790 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1793 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1794 3bit immediate operands.
1796 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1798 * Released binutils 2.7.
1800 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1801 <kkaempf@progis.ac-net.de>.
1803 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1805 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1807 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1809 * sparc-dis.c (print_insn_sparclite): New routine to print
1810 sparclite instructions.
1812 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1814 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1816 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1818 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1819 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1820 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1822 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1824 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1825 Use autoconf-set values.
1826 (docdir, oldincludedir): Removed.
1827 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1829 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1831 * alpha-opc.c: New file.
1832 * alpha-opc.h: Remove.
1833 * alpha-dis.c: Complete rewrite to use new opcode table.
1834 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1835 * configure: Rebuild with autoconf 2.10.
1836 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1837 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1839 (alpha-opc.o): New target.
1841 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1843 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1844 Set imm_added_to_rs1 even if the source and destination register
1847 * sparc-opc.c: Add some two operand forms of the wr instruction.
1849 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1851 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1854 * disassemble.c (disassembler): Handle H8/S.
1855 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1857 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1859 * sparc-opc.c: Add beq/teq as aliases for be/te.
1861 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1862 <sergei@msil.sps.mot.com>.
1864 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1866 * makefile.vms: New file.
1868 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1870 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1872 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1875 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1877 * i386-dis.c (OP_OFF): Call append_prefix.
1879 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1881 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1882 unsigned long to silence a warning from the Solaris PowerPC
1885 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1887 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1889 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1891 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1893 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1894 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1895 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1896 cpush, cpusha, cpull sparclet insns.
1898 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1900 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1902 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1904 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1905 Set F_FLOAT on other floating point instructions.
1907 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1909 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1911 (powerpc_opcodes): Add 860/821 specific SPRs.
1913 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1915 * configure.in: Permit --enable-shared to specify a list of
1916 directories. Set and substitute BFD_PICLIST.
1917 * configure: Rebuild.
1918 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1919 uses. Set to @BFD_PICLIST@.
1921 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1923 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1924 not "abs", which may be needed for the absolute in something
1925 like btst #0,@10:8. Print L_3 immediates separately from other
1926 immediates. Change ABSMOV reference to ABS8MEM.
1928 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1930 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1931 (current_arch_mask): New static global.
1932 (compute_arch_mask): New static function.
1933 (print_insn_sparc): Delete sparc_v9_p. New static local
1934 current_mach. Resort opcode table if current_mach changes.
1935 Generalize "insn not supported" test.
1936 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1937 Delete test for v9/!v9.
1938 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1940 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1941 (brfcx): Renamed to FBRX.
1942 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1943 coprocessor mnemonics are not supported on the sparclet).
1944 (condf): Renamed to CONDF.
1945 (SLCBCC2): Delete F_ALIAS flag.
1947 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1949 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1950 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1952 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1954 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1955 that the shared library version number is set correctly.
1957 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1959 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1960 Miles Bader <miles@gnu.ai.mit.edu>.
1961 * configure: Rebuild.
1963 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1965 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1968 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1970 * configure: Rebuild with autoconf 2.8.
1972 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1974 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1975 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1977 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1979 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1980 since they appear as targets in Makefile.in.
1981 * configure: Rebuild.
1983 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1985 * mpw-make.sed: Edit out shared library support bits.
1987 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1989 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1990 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1991 (sparc_opcodes): Add sparclet insns.
1992 (sparclet_cpreg_table): New static local.
1993 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1994 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1996 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1998 * i386-dis.c (index16): New static variable.
1999 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2001 (OP_indirE): Return result of OP_E.
2002 (OP_E): Check for 16 bit addressing mode, and disassemble
2003 correctly. Optimised 32 bit case a little. Don't print
2004 "(base,index,scale)" when sib specifies only an offset.
2006 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2008 * configure.in: Set and substitute SHLIB_DEP.
2009 * configure: Rebuild.
2010 * Makefile.in (SHLIB_DEP): New variable.
2011 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2012 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2013 COMMON_SHLIB, add them to piclist with appropriate modifications.
2014 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2015 here: just use piclist.
2017 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2019 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2020 (print_insn_sparc): Rewrite v9/not-v9 tests.
2021 (compare_opcodes): Likewise.
2022 * sparc-opc.c (MASK_<ARCH>): Define.
2023 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2024 (sparclet,v6notv9): Define.
2025 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2026 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2028 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2030 * configure.in: Call AC_PROG_CC before configure.host.
2031 * configure: Rebuild.
2033 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2035 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2037 * i386-dis.c (onebyte_has_modrm): New static array.
2038 (twobyte_has_modrm): New static array.
2039 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2041 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2043 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2046 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2048 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2051 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2053 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2054 m68010up, not just m68020up | cpu32.
2056 * Makefile.in (SONAME): New variable.
2057 ($(SHLINK)): Make a link to the transformed name, as well.
2058 (stamp-tshlink): New target.
2059 (install): Skip stamp-tshlink during install.
2061 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2063 * configure.in: Call AC_ARG_PROGRAM.
2064 * configure: Rebuild.
2065 * Makefile.in (program_transform_name): New variable.
2066 (install): Transform library name before installing it.
2068 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2070 * i960-dis.c (mem): Add HX dcinva instruction.
2072 Support for building as a shared library, based on patches from
2073 Alan Modra <alan@spri.levels.unisa.edu.au>:
2074 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2075 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2076 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2077 * configure: Rebuild.
2078 * Makefile.in (ALLLIBS): New variable.
2079 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2080 (COMMON_SHLIB, SHLINK): New variables.
2081 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2082 (STAGESTUFF): Remove variable.
2083 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2084 (stamp-piclist, piclist): New targets.
2085 ($(SHLIB), $(SHLINK)): New targets.
2086 ($(OFILES)): Depend upon stamp-picdir.
2087 (disassemble.o): Build twice if PICFLAG is set.
2088 (MOSTLYCLEAN): Add pic/*.o.
2089 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2090 (distclean): Remove pic and stamp-picdir.
2091 (install): Install shared libraries.
2092 (stamp-picdir): New target.
2094 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2096 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2097 Print unknown instruction as "unknown", rather than in hex.
2099 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2101 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2103 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2105 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2107 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2109 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2110 when necessary. From Ulrich Drepper
2111 <drepper@myware.rz.uni-karlsruhe.de>.
2113 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2115 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2116 sparc_num_opcodes. Update architecture enum values.
2117 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2118 (sparc_opcode_lookup_arch): New function.
2119 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2120 (sparc_opcodes): Add v9a shutdown insn.
2122 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2124 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2125 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2127 (print_insn_sparc64): Deleted.
2128 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2131 * sparc-opc.c (architecture_pname): Add v9a.
2133 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2135 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2136 incorrectly defined as 0x16 when it should be 0x15.
2137 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2138 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2139 excb (exception barrier) which is defined in the Alpha
2140 Architecture Handbook version 2.
2141 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2142 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2143 disassembled as or, for example.
2145 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2147 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2148 (_print_insn_mips): Change i from int to unsigned int.
2150 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2152 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2153 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2155 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2157 * i386-dis.c: Added Pentium Pro instructions.
2159 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2161 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2164 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2166 * sh-opc.h (sh_nibble_type): Added REG_B.
2167 (sh_arg_type): Added A_REG_B.
2168 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2170 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2172 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2174 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2176 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2178 * Makefile.in (distclean): Remove stamp-h. From Ronald
2179 F. Guilmette <rfg@monkeys.com>.
2181 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2183 From David Mosberger-Tang <davidm@azstarnet.com>:
2184 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2187 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2189 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2190 (sh_table): Added many SH3 opcodes.
2191 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2193 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2195 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2196 (subco,subco.): Mark this PPC, not PPCCOM.
2198 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2200 * configure: Rebuild with autoconf 2.7.
2202 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2204 * configure: Rebuild with autoconf 2.6.
2206 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2208 * configure.in: Sort list of architectures. Accept but do nothing
2209 for alliant, convex, pyramid, romp, and tahoe.
2211 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2213 * a29k-dis.c (print_special): Change num to unsigned int.
2215 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2217 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2220 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2222 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2223 * configure: Rebuilt.
2225 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2227 * configure.in: Add case for bfd_i860_arch.
2228 * configure: Rebuild.
2230 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2232 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2233 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2234 (NEXTDOUBLE): Likewise.
2235 (print_insn_m68k): Don't match fmoveml if there is more than one
2236 register in the list.
2237 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2239 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2241 * m68k-opc.c: Use #W rather than #w.
2242 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2244 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2246 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2247 and likewise for all the dbxx opcodes.
2249 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2251 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2253 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2255 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2256 the VR4100 specific instructions to the mips_opcodes structure.
2258 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2260 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2261 ugly Metrowerks bug in CW6, is fixed in CW7.
2263 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2265 * ppc-opc.c (whole file): Add flags for common/any support.
2267 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2269 * Makefile.in (BISON): Remove macro.
2270 (FLAGS_TO_PASS): Remove BISON.
2272 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2274 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2276 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2277 instructions that take no args by looking at the match mask.
2278 (print_insn_arg): Always print "%" before register names.
2279 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2280 [case '_']: Don't print "@#" before address.
2281 [case 'J']: Use "%s" as format string, not register name.
2282 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2284 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2286 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2289 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2291 From David Mosberger-Tang <davidm@azstarnet.com>
2293 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2294 (alpha_insn_set): added definitions for VAX floating point
2295 instructions (Unix compilers don't generate these, but handcoded
2296 assembly might still use them).
2298 * alpha-dis.c (print_insn_alpha): added support for disassembling
2299 the miscellaneous instructions in the Alpha instruction set.
2301 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2303 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2304 no longer create sysdep.h, sed ppc-opc.c to work around a
2305 serious Metrowerks C bug.
2306 * mpw-make.in: Remove.
2307 * mpw-make.sed: New file, used by mpw-configure to edit
2308 Makefile.in into an MPW makefile.
2310 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2312 * Makefile.in (maintainer-clean): New synonym for realclean.
2314 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2316 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2317 which use '0', '1', and '2' instead. Specify the proper size for
2318 a pmove immediate operand. Correct the pmovefd patterns to be
2319 moves to a register, not from a register.
2320 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2322 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2324 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2325 %psr, %wim, %tbr as F_NOTV9.
2327 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2329 * Makefile.in (Makefile): Just rebuild Makefile when running
2331 (config.h, stamp-h): New targets.
2332 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2333 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2334 rebuilding config.h.
2335 * configure: Rebuild.
2337 * mips-opc.c: Change unaligned loads and stores with "t,A"
2338 operands to use "t,A(b)".
2340 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2342 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2344 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2346 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2347 until 3 instead of until 2.
2349 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2351 * Makefile.in (ALL_CFLAGS): Define.
2352 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2353 (MOSTLYCLEAN): Add config.log.
2354 (distclean): Don't remove config.log.
2355 * configure.in: Substitute HDEFINES.
2356 * configure: Rebuild.
2358 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2360 * sh-opc.h (sh_arg_type): Add F_FR0.
2361 (sh_table, case fmac): Add F_FR0 as first argument.
2363 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2365 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2367 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2369 * sparc-dis.c: Remove all references to NO_V9.
2371 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2373 * aclocal.m4: Just include ../bfd/aclocal.m4.
2374 * configure: Rebuild.
2376 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2378 * sparc-dis.c (X_DISP19): Define.
2379 (print_insn, case 'G'): Use it.
2380 (print_insn, case 'L'): Sign extend displacement.
2382 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2384 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2385 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2386 host_makefile_frag or frags.
2387 * aclocal.m4: New file.
2388 * configure: Rebuild.
2389 * Makefile.in (INSTALL): Set to @INSTALL@.
2390 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2391 (INSTALL_DATA): Set to @INSTALL_DATA@.
2393 (AR_FLAGS): Set to rc rather than qc.
2394 (CC): Define as @CC@.
2395 (CFLAGS): Set to @CFLAGS@.
2396 (@host_makefile_frag@): Remove.
2397 (config.status): Remove dependency upon @frags@.
2399 * configure.in: ../bfd/config.bfd now just sets shell variables.
2400 Use them rather than looking through target Makefile fragments.
2401 * configure: Rebuild.
2403 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2405 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2407 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2409 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2410 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2413 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2414 (lookup_{name,value}): New functions.
2415 (prefetch_table): New static local.
2416 (sparc_{encode,decode}_prefetch): New functions.
2417 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2419 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2421 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2424 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2426 * sh-dis.c: Correct comment on first line of file.
2428 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2430 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2432 * sparc-opc.c (asi, membar): New static locals.
2433 (sparc_{encode,decode}_{asi,membar}): New functions.
2434 (sparc_opcodes, membar insn): Fix.
2435 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2436 Support decoding of membar masks.
2439 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2441 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2443 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2445 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2446 and likewise for the other branches. Add bhs as an alias for bcc,
2447 and likewise for the size variants. Add dbhs as an alias for
2450 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2452 * sh-opc.h (FP sts instructions): Update to match reality.
2454 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2456 * m68k-dis.c: (fpcr_names): Add % before all register names.
2457 (reg_names): Likewise.
2458 (print_insn_arg): Don't explicitly print % before register names.
2459 Add % before register names in static array names. In case 'r',
2460 print data registers as `@(Dn)', not `Dn@'. When printing a
2461 memory address, don't print @# before it.
2462 (print_indexed): Change base_disp and outer_disp from int to
2463 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2464 syntax. Sign extend 8 byte displacement correctly.
2465 (print_base): Print using MIT syntax. Print zpc when appropriate.
2466 Change parameter disp from int to bfd_vma.
2468 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2471 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2473 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2474 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2475 * sh-opc.h (sh_arg_type): Add new operand types.
2476 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2478 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2480 * Makefile.in (distclean): Remove generated file config.h.
2482 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2484 * Makefile.in (distclean): Remove generated file config.h.
2486 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2488 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2490 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2492 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2493 rather than numopcodes. Use m68k_opcodes rather than removed
2494 opcode function. Don't check F_ALIAS.
2495 (print_insn_arg): Change first parameter to be const char *.
2496 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2497 (m68k-opc.o): New target.
2498 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2499 * configure: Rebuild.
2501 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2503 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2504 (opcode_bits, opcode_hash_table): New variables.
2505 (opcodes_initialized): Renamed from opcodes_sorted.
2506 (build_hash_table): New function.
2507 (is_delayed_branch): Use hash table.
2508 (print_insn): Renamed from print_insn_sparc, made static.
2509 Build and use hash table. If !sparc64, ignore sparc64 insns,
2510 and vice-versa if sparc64.
2511 (print_insn_sparc, print_insn_sparc64): New functions.
2512 (compare_opcodes): Move sparc64 opcodes to end.
2513 Print commutative insns with constant second.
2514 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2516 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2518 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2519 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2520 avoids printing a delay slot in a delay slot.
2521 * sh-opc.h (sh_table): Fully bracket last entry.
2523 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2525 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2527 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2529 * configure.in: Get host_makefile_frag from ${srcdir}.
2531 * configure.in: Autoconfiscated. Check for string[s].h. Create
2532 config.h from config.in. Don't set up sysdep.h link.
2533 * sysdep.h: New file.
2534 * configure, config.in: New files, generated from configure.in.
2535 * Makefile.in: Updated to be processed autoconf-style.
2536 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2537 (Makefile): Depend on config.status.
2538 (config.status): New rule.
2539 * configure.bat: Update Makefile substitutions.
2541 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2543 * mips-opc.c (L1): Define.
2544 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2545 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2548 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2550 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2551 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2552 have multiple add units but only a single logical unit.
2554 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2555 shifted by 18, without any insertion or extraction function.
2556 (insert_cr, extract_cr): Remove.
2558 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2560 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2563 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2565 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2566 * sh-opc.h: Add copyright.
2568 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2570 * Makefile.in (crunch-m68k): Delete extra target accidentally
2571 checked in a while ago.
2573 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2575 * sh-opc.h (sh_table): Add SH3 support.
2577 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2579 * sh-opc.h: Added bsrf and braf.
2581 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2583 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2584 bogus [ls]fm{ea,fd} patterns.
2586 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2587 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2588 initialize it from memory. Make function static.
2589 (print_insn_{big,little}_arm): New functions.
2590 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2591 the correct endianness.
2593 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2595 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2598 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2600 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2601 17th, so that it builds again using GCC as the compiler.
2603 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2605 * mips-dis.c (print_insn_little_mips): Cast return value from
2606 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2607 expects an unsigned long, and that might be fewer words of
2608 argument storage (e.g., if bfd_vma is long long on a 32-bit
2610 (print_insn_big_mips): Likewise with bfd_getb32 value.
2611 (_print_insn_mips): Now static.
2613 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2615 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2616 gcc memory hog problem with initializer is fixed.
2618 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2620 Merge in support for Mac MPW as a host.
2621 (Old change descriptions retained for informational value.)
2623 * mpw-config.in (archname): Compute from the config.
2624 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2626 * mpw-config.in (target_arch): Compute from canonical target.
2627 (m68k, mips, powerpc, sparc): Add architectures.
2628 * mpw-make.in (disassemble.c.o): Add.
2629 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2631 * mpw-config.in (BFD_MACHINES): Set to a default value.
2632 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2634 * mpw-make.in (CSEARCH): Add extra-include to search path.
2636 * mpw-config.in (varargs.h): Don't create.
2637 (sysdep.h): Create using forward-include.
2638 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2640 * mpw-config.in: New file, MPW version of configure.in.
2641 * mpw-make.in: New file, MPW version of Makefile.in.
2643 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2645 * alpha-dis.c (print_insn_alpha): Put empty statement after
2648 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2650 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2651 (low_sign_extend): Likewise.
2652 (get_field): Delete unused function.
2653 (set_field, deposit_14, deposit_21): Likewise.
2655 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2657 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2660 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2662 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2664 * alpha-opc.h (OSF_ASMCODE): define
2665 print pal-code names as defined in App C of the
2666 Alpha Architecture Reference Manual
2668 * alpha-dis.c: cleaned up output
2669 print stylized code forms as defined in App A.4.3 of the
2670 Alpha Architecture Reference Manual
2672 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2674 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2676 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2679 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2681 * m68k-dis.c (opcode): New function. Returns address of opcode
2682 table entry given index, even if the opcode table was split to
2683 work around gcc bugs.
2684 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2686 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2687 (reg_names): Now const.
2688 (print_insn_arg): Arrays cacheFieldName and names now const.
2689 (print_indexed): Array scales now const.
2691 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2693 * ppc-opc.c: Sort recently added instructions by minor opcode
2694 number within major opcode number.
2696 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2698 * hppa-dis.c: Include libhppa.h.
2700 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2702 * mips-opc.c: Change dli to use M_DLI, and add dla.
2704 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2706 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2708 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2710 * mips-opc.c: Add r4650 mul instruction.
2712 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2714 * mips-opc.c: Add uld and usd macros for unaligned double load and
2717 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2719 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2720 mfdcr, mtdcr, icbt, iccci.
2722 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2724 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2725 signed char fields to shorts, more portable.
2727 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2729 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2730 char fields as signed chars, since they may have negative values.
2732 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2734 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2735 (mycroft@netbsd.org).
2737 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2739 From "Logg, Ed" <elogg@ea.com>:
2740 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2741 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2744 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2746 * ppc-opc.c: Changes based on patch from David Edelsohn
2747 <edelsohn@mhpcc.edu>.
2748 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2751 (insert_tbr): New static function.
2752 (extract_tbr): New static function.
2753 (XFXFXM_MASK, XFXM): Define.
2754 (XSPRBAT_MASK, XSPRG_MASK): Define.
2755 (powerpc_opcodes): Add instructions to access special registers by
2756 name. Add mtcr and mftbu.
2758 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2760 * mips-opc.c (P3): Define.
2761 (mips_opcodes): Add mad and madu.
2763 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2765 * configure.in: Add W65 support.
2766 * disassemble.c: Likewise.
2767 * w65-opc.h, w65-dis.c: New files.
2769 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2771 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2774 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2776 * mips-opc.c: Add dli as a synonym for li.
2778 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2780 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2781 print something for reserved opcode values, even if it won't
2784 * mips-dis.c (_print_insn_mips): When initializing, shift right
2785 and mask, to avoid sign extension problems on the Alpha.
2787 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2790 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2792 * sh-opc.h (mov.l gbr): Get direction right.
2793 * sh-dis.c (print_insn_shx): New function.
2794 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2795 print opcodes with right byte order.
2797 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2799 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2800 to avoid conflicts with getopt.
2802 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2804 * hppa-dis.c (print_insn_hppa): Read the instruction using
2805 bfd_getb32, so that it works on a little endian or 64 bit host.
2806 Remove unused local variable op.
2808 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2810 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2811 addu does not work correctly if -mips3.
2813 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2815 * a29k-dis.c (print_special): Add special register names defined
2816 on 29030, 29040 and 29050.
2817 (print_insn): Handle new operand type 'I'.
2819 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2821 * Makefile.in (INSTALL): Use top level install.sh script.
2823 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2825 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2826 that it works on a little endian host.
2828 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2830 * configure.in: Use ${config_shell} when running config.bfd.
2832 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2834 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2836 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2838 * a29k-dis.c (print_insn): Print the opcode.
2840 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2842 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2844 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2846 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2848 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2850 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2851 which store a value into memory.
2853 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2855 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2856 * arm-dis.c, arm-opc.h: New files.
2858 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2860 * Makefile.in (ns32k-dis.o): Add dependency.
2861 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2862 string, not as array of chars.
2864 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2866 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2868 * sparc-opc.c: Added sparclite extended FP operations, and
2869 versions of v9 impdep* instructions permitting specification of
2872 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2874 * i960-dis.c (reg_names): Now const.
2875 (struct sparse_tabent): New type, copied from array type in mem
2877 (ctrl): Local static array ctrl_tab now const.
2878 (cobr): Local static array cobr_tab now const.
2879 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2880 static variable mem_tab no longer explicitly initialized. Changed
2881 mem_init to const array of struct sparse_tabent.
2882 (reg): Local static variable reg_tab no longer explicitly
2883 initialized. Changed reg_init to const array of struct
2885 (ea): Local static array scale_tab now const.
2887 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2890 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2892 * configure.bat: the disassember needs to be enabled for
2893 "objdump -d" to work in djgpp.
2895 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2897 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2898 (invalid_float): Enabled general version, doesn't require running
2899 on ns32k host. Changed to take char* argument, and test for
2900 explicitly specified sizes, instead of using sizeof() on host CPU
2902 (INVALID_FLOAT): Cast first argument.
2903 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2904 list_P032, list_M032): Now const.
2905 (optlist, list_search): Made appropriate arguments now point to
2907 (print_insn_arg): Changed static array of one-character-string
2908 pointers into a static const array of characters; fixed sprintf
2909 statement accordingly.
2911 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2913 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2914 from distribution. A ns32k-dis.c from a previous distribution has
2915 been brought up to date and supports the new interface.
2917 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2919 * configure.in: add bfd_ns32k_arch target support.
2921 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2922 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2924 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2926 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2929 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2931 * h8300-dis.c, mips-dis.c: Don't use true and false.
2933 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2935 * configure.in: Change --with-targets to --enable-targets.
2937 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2939 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2940 opcodes to the first instruction with that opcode, to speed
2941 disassembly of large files. From ralphc@pyramid.com (Ralph
2944 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2946 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2948 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2950 * configure.bat: update to latest makefile.in
2952 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2954 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2955 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2956 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2957 slot insn is in a delay slot.
2958 * z8k-opc.h: (resflg): Fix patterns.
2959 * h8500-opc.h Fix CR insn patterns.
2961 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2963 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2964 "cmpl" before POWER versions, so that gas -many uses them.
2966 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2968 * disassemble.c: New file.
2969 * Makefile.in (OFILES): Add disassemble.o.
2970 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2971 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2972 binutils/configure.in.
2974 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2975 opcode being examined.
2977 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2979 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2980 (insert_ral, insert_ram, insert_ras): New functions.
2981 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2982 RAS for store with update.
2984 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2986 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2987 (edelsohn@npac.syr.edu).
2989 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2991 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2994 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2996 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2998 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3000 * ppc-opc.c (powerpc_operands): The signedp field has been
3001 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3002 instead. Add new operand SISIGNOPT.
3003 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3004 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3005 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3008 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3010 * i386-dis.c (struct private): Renamed to dis_private. `private'
3011 is a reserved word for dynix cc.
3013 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3015 * configure.in: Change error message to refer to bfd/config.bfd
3016 rather than bfd/configure.in.
3018 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3020 * ppc-opc.c: Define POWER2 as short alias flag.
3021 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3024 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3026 * i960-dis.c (print_insn_i960): Don't read a second word for
3027 opcodes 0, 1, 2 and 3.
3029 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3031 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3033 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3035 * m68881-ext.c: Removed; no longer used.
3036 * Makefile.in: Changed accordingly.
3038 * m68k-dis.c (ext_format_68881): Don't declare.
3039 (print_insn_m68k): If an instruction uses place 'i', it uses at
3040 least four fixed bytes.
3041 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3042 extended float, convert to double using floatformat_to_double, not
3043 ieee_extended_to_double, and fetch the data before converting it.
3045 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3047 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3048 davidj@ICSI.Berkeley.EDU (David Johnson).
3050 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3052 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3053 PowerPC uses bdnz[l][a].
3055 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3057 * dis-buf.c, i386-dis.c: Include sysdep.h.
3059 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3061 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3063 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3064 by Motorola PowerPC 601 with PPC_OPCODE_601.
3065 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3066 Disassemble Motorola PowerPC 601 instructions as well as normal
3067 PowerPC instructions.
3069 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3071 * i960-dis.c (reg, mem): Just use a static array instead of
3074 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3076 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3077 condition name index if this is for a negated condition.
3079 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3080 Floating point format for 'H' operand is backwards from normal
3081 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3082 operands (fmpyadd and fmpysub), handle bizarre register
3083 translation correctly for single precision format.
3085 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3086 or 'I' operands if the next format specifier is 'M' (fcmp
3087 condition completer).
3089 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3091 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3092 single number giving a bitmask for the MB and ME fields of an M
3093 form instruction. Change NB to accept 32, and turn it into 0;
3094 also turn 0 into 32 when disassembling. Seperated SH from NB.
3095 (insert_mbe, extract_mbe): New functions.
3096 (insert_nb, extract_nb): New functions.
3097 (SC_MASK): Mask out SA and LK bits.
3098 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3099 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3100 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3101 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3102 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3103 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3104 (powerpc_macros): Define table of macro definitions.
3105 (powerpc_num_macros): Define.
3107 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3108 if PPC_OPERAND_NEXT is set.
3110 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3112 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3113 char. Retrieve contents using bfd_getl32 instead of shifting.
3115 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3117 * ppc-opc.c: New file. Opcode table for PowerPC, including
3118 opcodes for POWER (RS/6000).
3119 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3120 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3121 (CFILES): Add ppc-dis.c.
3122 (ppc-dis.o, ppc-opc.o): New targets.
3123 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3125 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3127 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3128 No space before 'u', 'f', or 'N'.
3130 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3132 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3133 farther than we should.
3135 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3137 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3139 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3141 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3143 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3144 needs it, to prevent reading past the end of a section.
3146 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3148 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3149 Removed t,A case for la; always use t,A(b) case.
3151 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3153 From Ted Lemen <mellon@pepper.ncd.com>
3154 * mips-dis.c (print_insn_arg): Handle 'k'.
3155 * mips-opc.c: Make cache use k, not t.
3157 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3159 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3160 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3161 FLOAT_FORMAT_CODE to put out floating point register names.
3163 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3165 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3167 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3169 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3171 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3173 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3174 larger than 32. Moved dsxx32 variants first for disassembler.
3176 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3178 * z8kgen.c, z8k-opc.h: Add full lda information.
3180 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3182 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3183 movb instructions. Any necessary space will be emitted by
3184 the code to handle nullification completers.
3186 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3188 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3190 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3192 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3193 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3195 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3197 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3199 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3201 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3202 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3204 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3206 * m88k-dis.c (m88kdis): comment change. Remove space after
3208 (printop): handle new arg types DEC and XREG for m88110.
3210 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3212 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3213 type for absolute branch addresses. Delete special
3214 "ble" and "be" code in 'W' operand code.
3216 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3218 * mips-opc.c: Set hazard information correctly for branch
3219 likely instructions.
3221 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3223 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3224 info->fprintf_func for printing and info->print_address_func for
3227 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3229 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3231 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3233 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3234 Corrected second case of "b" for disassembler.
3236 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3238 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3239 to BFD swapping routines to correspond to BFD name changes.
3241 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3243 * mips-opc.c: Change div machine instruction to be z,s,t rather
3244 than s,t. Change div macro to be d,v,t rather than d,s,t.
3245 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3246 rem and remu which generates only the corresponding div
3247 instruction. This is for compatibility with the MIPS assembler,
3248 which only generates the simple machine instruction when an
3249 explicit destination of $0 is used.
3250 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3252 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3254 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3255 WR_31 hazard for bal, bgezal, bltzal.
3257 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3259 * hppa-dis.c (print_insn_hppa): Use print function
3260 from within the disassemble_info, not fprintf_filtered.
3262 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3264 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3265 Law, law@cs.utah.edu.)
3267 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3269 * mips-opc.c ("absu"): Removed.
3272 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3274 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3275 Changed hazard information to distinguish between memory load
3276 delays and coprocessor load delays.
3278 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3280 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3282 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3284 * configure.in: Don't pass cpu to config.bfd.
3286 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3288 * m88k-dis.c (m88kdis): Make class unsigned.
3290 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3292 * alpha-dis.c (print_insn_alpha): One branch format case was
3293 missing the instruction name.
3295 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3297 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3298 Add the arch-specific auxiliary files.
3299 (OFILES): Remove the arch-specific auxiliary files
3300 and use BFD_MACHINES instead of DIS_LIBS.
3301 * configure.in: Set BFD_MACHINES based on --with-targets option.
3303 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3305 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3308 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3310 * sparc-opc.c: Change CONST to const to deal with gcc
3311 -Dconst=__const -traditional.
3313 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3315 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3316 coprocessor instructions out of #if 0, and made them use new
3319 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3321 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3323 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3325 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3326 instruction, for use by the disassembler.
3328 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3329 hand-coded sign extensions that depended on 32-bit host ints.
3330 FIXME, we still depend on big-endian host bitfield ordering.
3331 (sparc_print_insn): Set the insn_info_valid field, and the
3332 other fields that describe the instruction being printed.
3334 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3336 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3337 `jmp' instead of just one of them.
3339 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3341 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3342 (fput_fp_reg_r): Renamed from fput_reg_r.
3343 (fput_fp_reg): New function.
3344 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3346 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3348 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3350 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3352 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3354 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3355 don't output a space.
3357 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3359 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3361 * mips-opc.c: New file, containing opcode table from
3362 ../include/opcode/mips.h.
3363 * Makefile.in: Add it.
3365 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3367 * m88k-dis.c: New file, moved in from gdb and changed to use the
3368 new dis-asm.h disassembler interface.
3369 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3370 (m88k-dis.o): New target.
3372 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3374 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3375 argument string const char * to correspond to opcode/mips.h.
3377 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3379 * mips-dis.c: Updated to account for name changes in new version
3381 * Makefile.in: Added header file dependencies.
3383 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3385 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3387 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3389 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3390 extend, rather than shifts.
3392 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3394 * Makefile.in: Undo 15 June change.
3396 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3398 * m68k-dis.c (print_insn_arg): Change return value to byte count
3400 * m68k-dis.c: Re-write to detect invalid operands before
3401 printing anything, so we can handle this the same way we
3402 handle invalid opcodes.
3404 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3406 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3408 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3410 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3413 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3415 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3417 * configure.in: Do make sysdep.h link.
3418 * Makefile.in: Search ../include. Don't search ../bfd.
3420 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3422 Changes from Jeff Law, law@cs.utah.edu:
3423 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3424 Do not print a space before the completers specified by
3427 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3429 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3430 defined, since gdb has been fixed.
3432 Changes from Jeff Law, law@cs.utah.edu:
3433 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3434 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3435 be a *disassemble_info, not a *FILE.
3436 * hppa-dis.c: Support 'd', '!', and 'a'.
3437 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3438 * hppa-dis.c: Delete cases which are no longer needed.
3440 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3442 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3444 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3446 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3449 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3451 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3452 * configure.in: No longer need to configure to get sysdep.h.
3454 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3456 * Patches from Jeffrey Law <law@cs.utah.edu>.
3457 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3458 templates for 1.1 FP computational instructions.
3460 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3462 * h8500-dis.c (print_insn_h8500): Address argument is type
3464 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3467 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3468 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3470 * sparc-dis.c (compare_opcodes): Move static declaration to
3473 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3475 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3476 instruction, remove unimp hack from 'l' argument.
3478 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3480 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3483 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3485 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3486 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3489 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3491 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3492 arrays of string pointers to 2-d arrays of chars, to save
3495 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3497 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3498 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3500 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3502 * hppa-dis.c: New file from Utah, adapted to new disassembler
3504 * Makefile.in: Include it.
3506 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3508 * sh-dis.c, sh-opc.h: New files.
3510 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3512 * alpha-dis.c, alpha-opc.h: New files.
3514 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3516 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3519 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3521 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3523 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3525 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3528 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3530 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3531 and double percent signs a few places.
3533 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3535 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3536 Use info->print_address_func not print_address.
3538 * dis-buf.c (generic_print_address): New function.
3540 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3542 * Makefile.in: Add sparc-dis.c.
3543 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3545 Add `add' instruction to the set that get checked
3546 for a preceding `sethi' in order to print an absolute address.
3547 * (print_insn): Disassembly prefers real instructions.
3548 (is_delayed_branch): Speed up.
3549 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3550 Still missing some float ops, and needs testing.
3551 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3552 F_ALIAS. Use printf, not fprintf, when not passing a file
3554 (compare_opcodes): Check that identical instructions have
3555 identical opcodes, complain otherwise.
3558 * Include reg_names.
3560 Use dis-asm.h/read_memory_func interface.
3562 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3564 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3565 deliberately return non-zero to setjmp from longjmp. Otherwise
3566 this code fails to compile.
3568 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3570 * m68k-dis.c: Fix prototype for fetch_arg().
3572 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3574 * dis-buf.c: New file, for new read_memory_func interface.
3575 Makefile.in (OFILES): Include it.
3576 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3577 Use new read_memory_func interface.
3579 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3581 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3582 * h8500-opc.h: Fix couple of opcodes.
3584 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3586 * Makefile.in: add dvi & installcheck targets
3588 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3590 * Makefile.in: Update for h8500-dis.c.
3592 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3594 * h8500-dis.c, h8500-opc.h: New files
3596 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3598 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3599 ../include/dis-asm.h.
3600 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3601 and ../gdb/m68k-pinsn.c).
3602 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3603 and ../gdb/i386-pinsn.c).
3604 * m68881-ext.c: New file. Moved definition of
3605 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3606 * Makefile.in: Adjust for new files.
3607 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3608 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3609 can be dis-assembled.
3611 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3613 * mips-dis.c (print_insn_arg): Now returns void.
3615 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3617 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3618 files that use the macros.
3620 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3622 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3623 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3624 (CFILES): Added mips-dis.c.
3626 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3628 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3629 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3631 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3633 * Makefile.in: Improve *clean rules.
3634 * configure.in: Allow a default host.
3636 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3638 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3639 files include other sysdep files
3641 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3643 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3645 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3647 * configure.in: For host support, use ../bfd/configure.host
3648 so it stays in sync with the ../bfd/hosts database.
3650 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3652 * configure.in: use cpu-vendor-os triple instead of nested cases
3654 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3656 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3657 *always* the wrong one.
3659 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3661 * z8kgen.c: added copyright info
3663 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3665 * z8k-dis.c (unparse_instr): prettier tabs
3666 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3668 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3670 * configure.in: Add ncr* configuration.
3671 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3672 picayune ANSI compilers happy.
3674 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3676 * configure.in (i386): Make i386 and i486 synonymous for now.
3677 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3679 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3681 * Makefile.in (install): Fix typo.
3683 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3685 * Makefile.in (make): Remove obsolete crud.
3686 (sparc-opc.o): Avoid Sun Make VPATH bug.
3688 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3690 * Makefile.in: since there are no SUBDIRS, remove rule and
3691 references of subdir_do.
3693 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3695 * Makefile.in (install): Get the library name right here too.
3696 Don't install bfd.h, since it's unrelated to this library. No
3697 subdirs to recurse into, either.
3698 (CFILES): The source file has a .c suffix, not .o.
3700 * sparc-opc.c: New file, moved from BFD.
3701 * Makefile.in (OFILES): Build it.
3703 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3705 * z8k-dis.c: fixed forward refferences of some declarations.
3707 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3709 * Makefile.in: get the name of the library right
3711 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3713 * z8k-dis.c: knows how to disassemble z8k stuff
3714 * z8k-opc.h: new file full of z8000 opcodes
3718 version-control: never